Different Ways to use Steel Channel Steel channel is a flexible material that comes in different diameters and thicknesses. Its cross-section has two perpendicular extensions on the top and bottom and looks like a squared-off C with a straight back. Steel channel is lighter and slightly more flexible when compared to other structural steel products, such as I-beams, but it also has less torsional strength, making it more prone to twisting in some circumstances. WALLS Steel channels apply to conventional hardwood frames for metallic housing, such as garages, warehouses, workshops, and original structures. As they move upwards from the lowest plate of the wall to the pinnacle plate, the studs support the vertical load of the building. A wooden stud and a steel channel weigh about the same, but the steel channel is far more sturdy and can sustain much more weight. Of course, installing the steel channel is more challenging because it requires bolting and riveting instead of just nailing. •
•
POLE BARN WALLS
Steel channels apply to construct the walls of pole barns to provide a point of attachment for the exterior siding, which is often sheet metal. Steel channels apply to build the walls of pole barns. These channels run horizontally from pole to pole. It applies to drywall as well. Over longer lengths, wood can readily twist or warp, lowering the stiffness and load-bearing capacity of the wall and giving the completed product an uneven or wavelike appearance. • ROOFS Steel channels can be applied as rafters on light-duty roofs, running from the eaves to the ridge and supporting the roof deck. The rafters can be smaller and lighter while it bears the same amount of weight by using steel channels in place of wood rafters. The steel channel is hardy and more durable than wood. • WINDOW AND DOOR FRAMES Both metal and wood-framed buildings can have secure window and door frames made of steel channels. The channel glides over the wall in the window or door aperture after being cut into four pieces with miter joints on each end. In contrast to wooden frames, this creates a flat surface in the opening for mounting a door or window. • WOOD BEAM SUPPORTS When more strength is needed, a steel channel can increase the rigidity and strength of wood beams in a building with a wood frame. Wooden beam contains large steel channels, which increase strength while allowing for the easy attachment of joists and other components to the wood beam.
Steel channels apply to construct the walls of pole barns to provide a point of attachment for the exterior siding, which is often sheet metal.