Internship Portfolio 2 - Siddharth R by Siddharth Ramkumar

+3'8" Lvl

up +4'8" Lvl

+4'4" Lvl

+3'4" Lvl

+3'0" Lvl

+2'6" Lvl

+4'0" Lvl

UP CABINETS ABOVE FOR STORAGE

CABINETS ABOVE FOR STORAGE

EB ROOM 13'2" X 4'6"

TOILET 5'1" X 4'6"

LOW AND HIGH COUNTER WITH HIGH STOOL SEATING

+3'2" Lvl WET KITCHEN 10'3" x 13'6"

+4'6" Lvl +4'0" Lvl

DRY KITCHEN 13'6" x 13'6"

GUEST BEDROOM 16'9" x 13'6"

DINING 16'-0" x13'6"

SIT OUT 7'1" x 14'2" +2'11" Lvl

CROCKERY

+5'0" Lvl

+3'6" Lvl

POUFFE

UTILITY 11'4" X 9'4"

STORE ROOM 7'2" X 9'4"

TALL UNIT STORAGE BUILT-IN MICROWAVE AND OVEN

POUFFE BUILT- IN -FRIDGE

+5'0" Lvl

TALL UNIT STORAGE

TV UNIT

+4'8" Lvl

+ 3'6"Lvl

SCREEN

+4'4" Lvl

+ 3'2"Lvl UP

TOILET 12'0" x 5'8"

WALK-IN-WARDROBE 6'4" x 5'8"

+ 2'10"Lvl

SHOWER AREA ORGANIC SOFA FOR FAMILY SPACE

+ 2'6"Lvl

INFORMAL LIVING 14'0" x12'9"

+ 2'6"Lvl + 2'10"Lvl + 3'2"Lvl

POWDER 4'6"X8'0"

POUFFE

FORMAL LIVING 17'0" x 19'3"

DECK + 3'6"LVL

POUFFE

CAR PARK 8' x 16' NICHE

PIANO

POUFFE

LIFT 5' x 6'6" OFFICE SPACE 18'9" x 11'3"

FOYER 9'0" x 11'10"

LAWN

+4'0" Lvl

FLOATING DRAWERS

SIT-OUT

VERTICAL LOUVERED SCREEN

PUJA 15'3" x 6'5" BUILT IN CONSOLE WITH MINI FRIDGE ACCOMODATED INSIDE AND EXTRA STORAGE.

POOJA CONSOLE

FIXED SEATING

POUFFE OPEN BOOK SHELF FLOATING DRAWERS

STORAGE SPACE FOR SHOES AND NEWSPAPERS

LUSH GREEN WALL

+3'6" Lvl

CAR PARK 8' x 16'

ENTRY PORCH

CANOPY WITH MS FRAMEWORK GRID AS PROPOSED BY STRUCTURAL CONSULTANTS FINISHED WITH NATURAL WOOD MERBAU/ QUILI OR EQUIVALENT ON ALL SIDES

180 DEGREE SWING OPENABLE GATE AS PER DETAIL DRAWING (PASSENGER GATE)

SECURITY CABIN

CANOPY WITH MS FRAMEWORK GRID AS PROPOSED BY STRUCTURAL CONSULTANTS FINISHED WITH NATURAL WOOD MERBAU/ QUILI OR EQUIVALENT ON ALL SIDES

AT LVL 2'6"

GATE

WICKET GATE

SITE BOUNDRY

TILL EXTENT OF FOOTPATH

NOTE

REVISION COLUMN NO. DATE

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

1 2 3

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-05-22-TH-PD-LA-R17-01

STRUCTURE

DRAWING NAME : GROUND FLOOR LAYOUT

ELECTRICAL

REVISION NO.: R17 REVISION DATE: 2018.05.22

PLUMBING

START DATE.: 2018-03-01

4 5 6 7

THIS DRAWING AND DESIGN ARE THE SOLE PROPERTY OF 1405DESIGNSTUDIO AND CANNOT BE LENT, REPRODUCED, TRACED, COPIED OR MODIFIED IN ANY MANNER WHATSOEVER WITHOUT THE PRIOR WRITTEN CONSENT OF THE DESIGNER.

DESCRIPTION

8 9 10 11 12 13 14

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DOWN

STAFF BEDROOM 9'7" X 8'6"

SCREEN

GENERATOR 8'6" X 8'6" BATH 8'9" X 8'0"

WALK-IN WARDROBE 11'10" X 6'0"

SOFA CUM BED FOR HOME THEATRE

POUFFE

SLEEPING AREA 14'3" x 13'4"

CCTV HUB

LOUNGE AREA 11'1" x 13'6"

TV UNIT PROVIDED AS PART OF THE BOOK SHELF

5'1" x 3'6'

6'1" x 7'1' SHOWER 5'1" x 3'6'

WALK IN WARDROBE 8'9" x 11'6"

SCREEN

WALK-IN WARDROBE 28'7" X 6'0"

LOW CONSOLE FOR ARTIFACTS

MURPHY BED

WALL FOR PHOTO GALLERY

NICHE

ROUND TABLE CONSOLE WITH CHANDELIER ABOVE

COMMON LOBBY 18'6" x 8'0"

WALL FOR PHOTO GALLERY

SON'S BATH 6'8" X 11'9"

SON'S BEDROOM 17'4" x 20' DRESSER

CONSOLE WITH MIRROR ABOVE

LIFT 5' x 6'6" DAUGHTER'S BEDROOM 18'3" x 11'3"

WALK IN WARDROBE 6'9" x 11'4"

swing suspended from ceiling POUFFE

WALK-IN-WARDROBE-2 8'0" x 11'5"

SIT OUT 10'9" x 5'4.5" DAUGHTER'S BATH 10'9" X 5'4" SUNSHADE WITH MS FRAMEWORK GRID AS PROPOSED BY STRUCTURAL CONSULTANTS FINISHED WITH NATURAL WOOD MERBAU/ QUILI OR EQUIVALENT ON ALL SIDES

NOTE

REVISION COLUMN DATE NO.

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

1 2 3

DESCRIPTION

NOTES/LEGEND

SUNSHADE WITH MS FRAMEWORK GRID AS PROPOSED BY STRUCTURAL CONSULTANTS FINISHED WITH NATURAL WOOD MERBAU/ QUILI OR EQUIVALENT ON ALL SIDES

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-05-22-TH-PD-LA-R17-02

STRUCTURE

DRAWING NAME : FIRST FLOOR LAYOUT

ELECTRICAL

REVISION NO.: R17 REVISION DATE: 2018.05.22

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

6 7

8 9 10 11 12 13 14

Ledge wall upto 4'

CONSULTANT TEAM

4 5

SHOWER AREA

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

OPEN BOOK SHELVES ABOVE

TV UNIT

POUFFE

LOUNGE AREA 14'9.5" X 19'6"

LOUNGE

SONS BEDROOM 12'9.5" X 14'3" WARDROBE 7'9" X 9'7"

SITOUT 7'4" x 19'6"

SLIDING FOLDING GLASS DOORS ON METAL FRAME

SHOWER 7'5" x 3'6'

+ 1' FROM TERRACE LEVEL

TOILET 6'0" x 6'0"

STUDY + 8" FROM TERRACE LEVEL

+ 4" FROM TERRACE LEVEL

WALK IN WARDROBE 13'1" X 5'3"

+6" FROM SECOND FLOOR LEVEL

LOUNGE

UP UP -3" FROM SECOND FLOOR LEVEL

SECOND FLOOR LEVEL

TERRACE 23'3" x 40'3"

DOWN ONE TILE THICKNESS LEVEL DROP FROM SECOND FLOOR FFL

Ledge wall upto 4' LIFT 5' x 6'6"

LOW AND HIGH COUNTER WITH HIGH STOOL SEATING GYM 15'9" x 11'3"

LAUNDRY ROOM 14'6" X 6'3" STORAGE FOR HOUSEHOLD ITEMS : BROOMS/BUCKETS/MOPS ETC

NOTE

REVISION COLUMN NO. DATE

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

1 2 3

NOTES/LEGEND

6 7

PROJECT TITLE : T HOUSE PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-05-22-TH-PD-LA-R17-02

STRUCTURE

DRAWING NAME : SECOND FLOOR LAYOUT

ELECTRICAL

REVISION NO.: R17 REVISION DATE: 2018.05.22

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

10 11 12 13 14

DRYER

ARCHITECTURE

8 9

GYM BATH 4' X 11'3"

CONSULTANT TEAM

4 5

DESCRIPTION

WASHING MACHINE

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1"/A.S.C 11'-102

14'-6"/A.S.C EQ

1"/ AS PER REQUIREMENT 54

/NOT MORE THAN 5.5"

NOT MORE THAN 4.5"

1"/AS PER REQUIREMENT 44

TO REFER SLIDING WINDOW PANEL/FIXED HEADBOARD DETAIL

ELEVATION B

ELEVATION A

ELEVATION C

WALL TO BE FINISHED WITH 12mm PLYWOOD, WRAPPED WITH 4mm THICK FOAM AND FABRIC AS PER ARCHITECT'S SPEC

WALL FINISHED WITH PUTTY AND PRIMER.FINAL FINISH IN PAINT AS PER ARCHITECT SPEC.

12mm plywood paneling made with neccesary framework finished with 4mm walnut veneer with 6mm grooves as per elevation mirror partition as per mirror detail drawing

ELEVATION D 12mm thk fixed plywood finished with 4mm walnut veneer with 6mm brass inlay as per the elevation

1" 44

25mm thk plywood sliding door finished with 4mm walnut veneer with 6mm grooves as per elevation

ELEVATION F WALL FINISHED WITH PUTTY AND PRIMER.FINAL FINISH IN PAINT AS PER ARCHITECT SPEC.

WARDROBE AS PER WARDROBE DETAIL DRAWING

ELEVATION E

EQ 4'-9"

PLAN - MASTER BEDROOM

EQ EQ/NOT LESS THAN 3' A.S.C

EQ EQ/NOT LESS THAN 3'

5'-9" 1"/A.S.C 11'-102

A.S.C

NOTE

REVISION COLUMN DATE NO.

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-06-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R0-01

SPECIFICATIONS:

STRUCTURE

DRAWING NAME : MASTER BEDROOM-PLAN

NOTES/LEGEND

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

ELECTRICAL

REVISION NO.: R0

SKIRTING MARBLE: SILVER RIVEIRA

PLUMBING

START DATE.: 2018-03-01

WALLPAPER: AS PER ARCHITECT'S SPEC.

MECHANICAL

SCALE : NTS

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

SECURITY

DRAWN :

REVISION DATE: 2018.12.06

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

13'-6"/A.S.C

A.S.C

6mm antique brass 1" T section to align with the door 1" architrave 4 4

A.S.C EQ

2'-2"

12mm plywood pelmet on the wall surface to be finished with wallpaper as per architect's spec 6mm antique brass finish edge plate extruded by 4mm

1 4"

1" 52 1" 12

1"/as per required 44 depth/not more than 4.5" 1 4"

To note: The finished pelmet surface to align with the finished surface of the ply partition

Surface to be finished with patti and oil primer.Final finish-Wallpaper as per architect's spec with brass edge plate extruded by 4mm

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER 1" 1'-02

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

12mm plywood paneling made with necessary framework finished with 4mm veneer as per spec with 6mm groove as per drg.

window as per drg

SLIDING DOOR PANEL AS PER DETAIL

9'-10"

AS PER WARDROBE DRAWING 1" 7'-82

8'-5"

10'

DETAIL B

6mm thk ply panels cut as per design wrapped with 20mm thick 32 density foam wrapped with 4mm soft foam and fabric as per spec, fixed to main headboard panel with adhesive. finished headboard to align with 6mm thick brass edge beading and paneling below sill level

2" thick fixed headboard made of 12mm plywood made with necessary framework finished with 1" foam and fabric as per design. Panel edge to be finished with 6mm antique brass plate

18mm plywood for sliding panel finished with 4mm veneer as per spec with 6mm grooves as per drg.to house guides for sliding mechanism

1.5" thk sliding panel made of 18mm ply finished with 4mm veneer as per design.

0.75"x1" solid brass section as frame for mirror fixed as per detail 1" 12

12mm fixed ply finished with 4mm veneer internally and externally with grooves and 6mm brass inlay as per design.Fixed panel edges to be finished with 6mm thk antique brass finish plate, flushed with the finished panel edge

12mm plywood finished with 4mm veneer

18mm plywood for sliding panel finished with 4mm veneer as per spec with 6mm grooves as per drg.to house guides for sliding mechanism 12mm plywood finished with 4mm veneer with 6mm antique brass inlay as T-section to extrude by 4mm from the finished surface as per elevation with brass finish plate, flushed with the finished panel edge

0.75"x1" solid brass section as frame for mirror fixed as per detail

SLIDING DOOR PANEL DETAIL

FFL 3"

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

12mm+18mm plywood with sliding channel as per spec

12mm ply finished with 4mm veneer with 6mm grooves as per the design.

12mm plywood paneling on wall surface, wrapped with 4mm thick foam and fabric as per spec

FFL

6mm x 12mm antique brass finish beading to be fixed to the fixed panel in line to match the bottom of pelmet extruded by 4mm

6mm antique brass finish edge plate extruded by 4mm from the finished surface to be fixed to the ply partition at the level to match the bottom of pelmet

1.5" thk sliding panel made of 18mm ply finished with 4mm veneer and 6mm brass inlay and wooden beading as per design. panel edges to be finished with 6mm thk antique brass finish plate, flushed with the finished panel edge

6mm antique brass finish T section extruded by 4mm from finished surface

12mm plywood pelmet finished with 6mm antique brass finish edge plate extruded by 4mm from finished surface of Wall Paper as per spec - pelmet surface to be finished with patti and oil primer

1 4"

1"/as per 54 required depth not more than 5.5"

1" 54 1" 44 1" 3" 3" 11" 3" 3" 4 4 2 4 4

ELEVATION C - MASTER BEDROOM

12mm plywood pelmet finished with 6mm antique brass finish edge plate extruded by 4mm from finished surface of Wall Paper as per spec - pelmet surface to be finished with patti and oil primer 6mm x45mm antique brass finish beading.

13'-6"/A.S.C 1"/as per 54 required depth not more than 5.5"

A.S.C

3'-6"

A.S.C

1"/as per required 44 depth/not more than 4.5"

extruded from finished pelmet level by 4mm, beading to continue on all sides of head board.

12mm plywood paneling on wall surface around the windows, wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass inlay as T sections, T sections to extrude from finished surface by 4mm as per elevation

1 4"

18mm+12mm plywood with sliding channel as per spec

6mm thk ply panels cut as per design wrapped with 20mm thick 32 density foam wrapped with 4mm soft foam and fabric as per spec, fixed to main headboard panel of 12mm ply with adhesive. headboard thickness finished with 6mm thick 45mm wide brass edge beading 6mm x 6mm antique brass finish sections extruded from veneer surface level by 4mm 1.5" thk sliding panel made of 18mm ply finished with 4mm veneer and 6mm brass inlay and beading as per design. panel edges to be finished with 6mm thk antique brass finish plate, flushed with the finished panel edge

ELEVATION C

6mm walnut wood beading

PLAN MASTER BEDROOM

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

DETAIL B

KEYPLAN - MASTER BEDROOM

NOTE

REVISION COLUMN DATE NO.

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-06-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R0-06

SPECIFICATIONS:

STRUCTURE

DRAWING NAME : MASTER BEDROOM INTERNAL ELEVATION-C

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

ELECTRICAL

REVISION NO.: R0

SKIRTING MARBLE: SILVER RIVEIRA

PLUMBING

START DATE.: 2018-03-01

WALLPAPER: AS PER ARCHITECT'S SPEC.

MECHANICAL

SCALE : NTS

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

SECURITY

DRAWN :

NOTES/LEGEND

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

1 4"

18mm plywood finished with 4mm veneer recessed from finish panel level to house sliding guide

REVISION DATE: 2018.12.06

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1"/as per 44 required depth/ not more than 4.5"

1" 44

brass brass T-section T-section to align to align with with the steps the steps

3" 11" 3" 3" 4 2 4 4

13'-6"/A.S.C EQ

5'-8" EQ

1 44"/as per required depth/ not more than 4.5"

grooves in veneer aligned with the steps

12mm plywood pelmet made with neccesary framework finished with patti and oil primer.Final finish in wallpaper as per architect's spec 6mm x 16mm antique brass finish beading extruded from finished pelmet level by 4mm 18mm+12mm plywood with sliding channel as per spec

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

ceiling surface finished with pattiand primer. Final finish in wallpaper as per architect's spec

ceiling surface finished with patti and wallpaper as per architect's spec

1.5" thk sliding panel made of 18mm ply finished with 4mm veneer and 6mm brass inlay and beading as per design. panel edges to be finished with 6mm thk antique brass finish plate, flushed with the finished panel edge 6mm x 6mm antique brass finish sections extruded from veneer surface level by 4mm

DETAIL A 6mm antique brass finish T section extruded by 4mm from finished surface of foam and fabric as per spec

6MM ABOVE 2'/ WINDOW SILL LVL

12mm plywood paneling in line with veneer ceiling finished with 4mm veneer with 6mm grooves as per the elevation

6mm walnut wood beading 18mm plywood finished with 4mm veneer recessed from finish panel level to house sliding guide

6mm grooves in 4mm veneer as per elevation

12mm plywood finished with 4mm veneer as per spec with 6mm grooves as per drg.

1 4"

12mm plywood panel made with necessary framework finished with 4mm veneer and 6mm antique brass finish edge plate, to house sliding guide for sliding panel

2'-01 4"

6mm x 16mm antique brass finish beading flushed with the finished veneer surface

9'-8"/A.S.C

12mm plywood pelmet on wall surface finished with 6mm antique brass finish edge plate extruded by 4mm, finished with wallpaper as per architect's spec

1 4"

A.S.C

9'-8"/A.S.C

8'-8"

ROOM FOYER

12mm plywood paneling on wall surface, wrapped with 4mm thick foam and fabric as per spec

12mm plywood paneling on wall surface , wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass inlay as T sections, T sections to extrude from finished surface by 4mm as per elevation

12mm plywood pelmet made with neccesary framework finished with 6mm antique brass finish edge plate extruded by 4mm finished with wallpaper as per architect's spec

6mm antique brass finish T section extruded by 4mm from finished surface of foam and fabric as per spec

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

Surface to be finished with patti and oil primer Final finish-Wallpaper as per architect's spec

1 4"

2'-2"

False ceiling as per spec

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

FFL 12 mm thk stone skirting flushed with the finished surface with 4mm groove at junction

ELEVATION A - MASTER BEDROOM 1"/pelmet 44 depth

1"/a.s.c 19'-102 EQ

EQ/A.S.C

1'-6"

DETAIL A

ELEVATION F - MASTER BEDROOM

41 4"/as per required depth/not more than 4.5"

TO NOTE: TV CONSOLE MADE AS PER DETAIL DRAWING

3" 3"

ELEVATION A

ELEVATION F

PLAN MASTER BEDROOM NOTE

REVISION COLUMN NO. DATE

KEYPLAN - MASTER BEDROOM

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-06-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R0-02

SPECIFICATIONS:

STRUCTURE

DRAWING NAME : MASTER BEDROOM INTERNAL ELEVATION-A

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

ELECTRICAL

REVISION NO.: R0

SKIRTING MARBLE: SILVER RIVEIRA

PLUMBING

START DATE.: 2018-03-01

WALLPAPER: AS PER ARCHITECT'S SPEC.

MECHANICAL

SCALE : NTS

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

SECURITY

DRAWN :

NOTES/LEGEND

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION DATE: 2018.12.06

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1" 6'-112 A.S.C

7' EQ

Surface to be finished with patti and oil primer. Final finish in wallpaper as per architect's spec

DETAIL D

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

BRASS INLAY ON PELMET CANCELLED DETAIL D

6MM ABOVE 2'/ WINDOW SILL LVL

A.S.C

PANEL A

PANEL B

FIXED HEADBOARD PANEL DETAIL

FFL 3"

FFL

ELEVATION B - MASTER BEDROOM (with sliding window panel) 7' EQ

12mm plywood pelmet finished with 6mm antique brass finish edge plate extruded by 4mm from finished surface of Wall Paper as per spec pelmet surface to be finished with patti and oil primer

1'-10"

12mm plywood pelmet finished with 6mm antique brass finish edge plate extruded by 4mm from finished surface of Wall Paper as per spec - pelmet surface to be finished with patti and oil primer

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

Surface to be finished with patti and oil primer. Final finish in wallpaper as per architect's spec

1.5" thick fixed headboard made of 18mm plywood made with necessary framework finished with 1" foam and fabric as per design. Panel edge to be finished with 6mm antique brass plate

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

BRASS INLAY ON PELMET CANCELLED

DETAIL D

2'-83" 4

PANEL B

PANEL A

6mm x 45mm antique brass finish beading extruded from finished pelmet level by 4mm, beading to continue on all sides of head board 1"/A.S.C/TO MATCH THE BOTTOM OF PELMET 8'-84 1" 23 5'-54 4"

A.S.C

8'-8"

A.S.C

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

1'-10"

1 4"

DETAIL D

Wall finished with putty and primer.final finish in paint as per architect 's spec.

1 3" 4"

Wall finished with putty and primer.final finish in paint as per architect 's spec.

A.S.C

FIXED HEADBOARD PANEL DETAIL

6MM ABOVE 2'/ WINDOW SILL LVL

12mm plywood panel made with necessary framework finished with veneer and 6mm antique brass finish edge plate. finished panel surface to match the fixed headboard panel. side surface to be finished with 6mm antique brass plate

12mm plywood pelmet made with necessary framework finished with veneer and 6mm antique brass finish edge plate. finished panel surface to match the fixed headboard panel. side surface to be finished with 6mm antique brass plate 12 mm thk stone skirting flushed with finished surface with 4mm groove at junction as per drg

A.S.C

6MM ABOVE 2'/ WINDOW SILL LVL

FFL

1 4"

6mm x 45mm antique brass finish beading extruded from finished pelmet level by 4mm, beading to continue on all sides of head board

1.75" thick fixed headboard made of 12mm plywood finished with 1" foam and fabric as per design. Panel edge to be finished with 6mm antique brass plate FIXED HEADBOARD DETAIL PLAN

ELEVATION B - MASTER BEDROOM (without sliding window panel)

A.S.C

1" 6'-112

13 4"

8'-8"

A.S.C

7' 1" 4

12mm plywood paneling on wall surface, wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass finish as T sections, T sections to extrude from finished surface by 4mm as per elevation

A.S.C 7'

EQ EQ

1 44"/ as per required depth

1" 54

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

ELEVATION

B DETAIL C TO REFER SLIDING WINDOW PANEL/ FIXED HEADBOARD DETAIL

ELEVATION B

PLAN MASTER BEDROOM KEYPLAN - MASTER BEDROOM

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

SPECIFICATIONS:

INTERIORS

DRAWING TITLE : 2019-02-16-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R2-03

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

STRUCTURE

DRAWING NAME : MASTER BEDROOM INTERNAL ELEVATION-B

SKIRTING MARBLE: SILVER RIVEIRA

ELECTRICAL

REVISION NO.: R2

WALLPAPER: AS PER ARCHITECT'S SPEC.

PLUMBING

START DATE.: 2018-03-01

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

NOTES/LEGEND

REVISION DATE: 2019.02.16

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

groove to align with the veneer ceiling

1"/A.S.C 11'-102

A.S.C EQ

8 equal parts with 6mm brass groove/to align with the veneer ceiling

EQ/NOT LESS THAN 3'

1" 3'-12

EQ/NOT LESS THAN 3'

5'-9" EQ

1" 3'-12

15 equal parts with 6mm groove

1" 21" 21" 21" 21" 21" 21" 21" 21" 21" 21" 21" 21" 21" 21" 22 4 4 4 4 4 4 4 4 4 4 4 4 4 2

False ceiling as per spec

1'-10"

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

1.5" thk sliding panel made of 18mm ply finished with 4mm veneer and 6mm grooves as per design.

DETAIL D

6mm grooves in 4mm veneer as per spec 12mm plywood pelmet finished with wallpaper as per architect's spec with 6mm antique brass finish edge plate extruded by 4mm

8'-9"/A.S.C

12mm plywood paneling around the wall surface made with necessary framework, extruded by not more than 4.5" from the wall surface, finished with 4mm veneer as per spec with 6mm grooves as per drg.

6mm grooves in veneer 4mm veneer as per spec 3'

3'-6"

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

FFL 3"

FFL

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

handle as per reference IMAGE-A

1" 22

6mm grooves in veneer aligned with veneer false ceiling, equidistant of average distance being not more than 4" bottom of sliding door handle to align with the design as per elevation 12mm plywood paneling on wall surface, wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass as T sections, T sections to extrude from finished surface by 4mm as per elevation

8'-9"/A.S.C

KEYPLAN - MASTER BEDROOM Wall to be finished with patti and primer. final finish in wallpaper as per architect's spec

8'-5"

12mm fixed plywood panel finished with 4mm veneer 6mm thk antique brass inlay as T sections and extrude from finished surface by 4mm , 6mm antique brass finish edge plate fixed to the ply partition to align with pelmet brass edge plate. side surface to be finished with 6mm antique brass plate

10'-6"/A.S.C

6mm thk antique brass inlay as T sections in the fixed plywood panel. T sections to extrude from finished surface by 4mm

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER

Surface to be finished with patti and oil primer.Final finish-Wallpaper as per architect's spec with the brass edge plate extruded by 4mm

Surface to be finished with patti and oil primer Final finish-Wallpaper as per architect's spec with brass edge plate extruded by 4mm

4'-6"

12mm pelmet finished with wallpaper as per architect's spec with 6mm antique brass finish edge plate extruded by 4mm

SLIDING DOOR PANEL DETAIL

ELEVATION D - MASTER BEDROOM (with sliding panel door)

groove to align with the veneer ceiling

1" 3'-12

3'-03 4"/A.S.C/EQ/NOT LESS THAN 3'

15 equal parts with 6mm groove

3'-03 4"/A.S.C/EQ/NOT LESS THAN 3'

5'-9" EQ

1" 3'-12

1" 12

1"/A.S.C 11'-102

A.S.C

A.S.C/ 8 equal parts with 6mm brass groove/to align with the veneer ceiling

1" 12

SLIDING DOOR PANEL DETAIL

15 equal parts with 6mm groove

SLIDING DOOR PANEL DETAIL PLAN

SLIDING DOOR PANEL DETAIL PLAN (REAR-FROM WARDROBE SIDE ELEVATION)

IMAGE -A FLUSHED PULL OUT DRAWER HANDLE IN ANTIQUE BRASS AS PER THE REFERENCE IMAGE.

False ceiling as per spec

Surface to be finished with patti and oil primer Final finish-Wallpaper as per architect's spec with brass edge plate extruded by 4mm

23 4" /a.s.c

Surface to be finished with patti and oil primer.Final finish-Wallpaper as per architect's spec with the brass edge plate extruded by 4mm

Surface to be finished with patti and oil primer Final finish-Wallpaper as per architect's spec with brass edge plate extruded by 4mm

23 4" /a.s.c

5'-9" EQ EQ 1" 4

1" 4

63 4"

1" 4

63 4"

1" 4

63 4"

1 4"

63 4"

1 4"

63 4"

1" 4

63 4"

1" 4

63 4"

1" 4

63 4"

1 4"

63 4"

1 4"

5'-9" 1" 4

1" 4

41 2"

1" 4

41 2"

1" 4

41 2"

1" 4

41 2"

1" 4

421"

1 4"

41 2"

1" 31" 4 2

1 31 2" 4"

41 2"

1" 4

421"

1 4"

41 2"

1" 4

421"

1" 4

41 2"

1" 4

41 2"

1" 4

12mm plywood pelmet finished with wallpaper as per architect's spec with 6mm antique brass finish edge plate extruded by 4mm

4 12"

PELMET BOTTOM TO MATCH THE BOTTOM OF FALSE CEILING AT ROOM FOYER 6mm x 16mm antique brass finish beading to be fixed to ply partition in line to match the bottom of pelmet extruded by 4mm

Wall to be finished with patti and primer. final finish in wallpaper as per architect's spec

6mm grooves in veneer aligned with veneer false ceiling, equidistant of average distance being not more than 4"

12mm plywood paneling on wall surface, wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass as Tsections, T sections to extrude from finished surface by 4mm as per elevation

18mm fixed plywood panel made with necessary framework finished with veneer

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

5'-8"

12mm plywood paneling around the wall surface made with necessary framework, extruded by not more than 4.5" from the wall surface, finished with 4mm veneer as per spec with 6mm grooves as per drg.

6mm thk antique brass edge plate

10'-6"/A.S.C

12mm plywood paneling finished with 4mm veneer as per spec with 6mm grooves as per drg

12 mm thk stone skirting flushed with finished surface with 4mm groove at junction

10'-3"

1" 4

10'-6"

41 2"

1'-10"

81 2"

DETAIL D

6mm grooves in veneer 4mm veneer as per spec

6mm thk antique brass inlay as T sections in the fixed plywood panel. T sections to extrude from finished surface by 4mm

FFL FIXED PANEL DETAIL

11 4"

ELEVATION D - MASTER BEDROOM (without sliding panel door) 1"/A.S.C 13'-24

3'-63 4"

1 3" 4"

5'-9" eq

6mm grooves in veneer 4mm veneer as per spec

A.S.C EQ/NOT LESS THAN 3'

EQ/NOT LESS THAN 3'

1" 2'-74

A.S.C

D' A.S.C

21 2"

1" 22

21 2"

1" 22

21 " 2A.S.C

21 2"

1" 22

21 2"

REAR ELEVATION

ELEVATION 5'-9" 1"

ELEVATION D

PLAN MASTER BEDROOM

A.S.C

21 2"

1" 22

21 2"

A.S.C

FIXED PANEL DETAIL PLAN

NOTE

REVISION COLUMN DATE NO.

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-05-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R0-05

SPECIFICATIONS:

STRUCTURE

DRAWING NAME : MASTER BEDROOM INTERNAL ELEVATION-D

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

ELECTRICAL

REVISION NO.: R0

SKIRTING MARBLE: SILVER RIVEIRA

PLUMBING

START DATE.: 2018-03-01

WALLPAPER: AS PER ARCHITECT'S SPEC.

MECHANICAL

SCALE : NTS

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

SECURITY

DRAWN :

NOTES/LEGEND

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION DATE: 2018.12.05

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

13'-6"/A.S.C EQ

EQ 1"/ FIXED FURNITURE LENGTH 5'-84 TO ALIGN WITH THE T-BRASS SECTIONS ON THE SOFT PANELING

1" 44

A.S.C

3'-6"

1" 44

10'-6"

0.5" x 0.5" brass section as per design fixed to the shelving

1'-3"

7"/TO ALIGN WITH THE GROOVE IN CONSOLE B

shelf made with 18mm plywood finished with veneer (horizontal grain) as per architect's spec to be fixed to the ply panelling on wall (TO NOTE: FIXING TO BE DONE BEFORE SOFT PANELLING)

2'-9"

9'-8"/A.S.C

EQ 1" 4'-62

ROOM FOYER

7"/TO ALIGN WITH THE GROOVE IN CONSOLE B

REFER DETAIL CONSOLE B 6mm groove in 4mm veneer, line to match the pelmet brass plate

1" 2'-52

REFER DETAIL CONSOLE A

MB-3

FFL

ELEVATION A - MASTER BEDROOM 1"/a.s.c 19'-102 A.S.C 1"/pelmet 44 depth

EQ EQ

1"/FIXED FURNITURE 5'-84 LENGTH TO ALIGN WITH THE T-BRASS SECTION ON THE SOFT PANELING

A /4

3 R-

4 3/

R-

1'-10"

1'-8"

1"/as per 44 required depth/not more than 4.5"

REFER DETAIL CONSOLE A

3 R-

REFER DETAIL CONSOLE B

ELEVATION A

TO NOTE: CONSOLE B TO MADE AS A LOOSE FURNITURE TO NOTE: CONSOLE A TO BE MADE FIXED FURNITURE

PLAN MASTER BEDROOM NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

NOTES/LEGEND

TO NOTE: ALL VENEER TO BE IN HORIZONTAL GRAIN VENEER SAMPLE TO BE APPROVED BY ARCHITECT STONE: SAINT LAURENT MARBLE

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-21-TH-WD-MASTER BEDROOM FURNITURE-R0-01

STRUCTURE

DRAWING NAME : MASTER BEDROOM FURNITURE-ELEVATION

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2018.12.18

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1'-6"

3" 8"

18mm plywood skirting to be finished with 75mm x 2mm brass plate

DETAIL AA

1'-4" 1'-1" 1" 1" 1 62 52 2"

1'-4"

handle as per IMAGE-A

pull out drawer made of 18mm ply finished internally and externally in 4mm veneer in horizontal grain internally and externally as per architect's spec 18mm plywood skirting to be finished with 75mm x 2mm brass plate

SECTION - AA'

2' 1"

6mm brass inlay flushed in line with finished surface 0.75" thk saint laurent marble with brass inlays as per design and spec

SIDE TABLE 1 PLAN (BRASS INLAY DETAIL)

18mm thk plywood finished in 4mm veneer in horizontal grain internally and externally

1'-6"

eq eq eq eq eq eq eq eq

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL

3" 4

SIDE TABLE 2 - FRONT ELEVATION

2' eq

EQ 3"

pull out drawer made of 18mm ply finished internally and externally in 4mm veneer in horizontal grain as per architect's spec

3" 4

1" 12

eq eq eq eq eq eq eq eq

3" 4

handle as per IMAGE-A 6mm brass inlay flushed with the veneer surface

1'-4"

1" 12

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL

SIDE TABLE 2 - SIDE ELEVATION

eq eq eq eq eq eq eq eq

3" 4

SIDE TABLE 1 - FRONT ELEVATION

1'-6"

1" 12

11" 1'-4"

1 2"

18mm plywood skirting to be finished with 75mm x 2mm brass plate X = distance to match the brass inlay in the front elevation

2' 4"

DETAIL AA (at the top of the side table)

IMAGE A DRAWER/ SHUTTER HANDLE: BRAND HETTICH- PRODECOR HANDLE COLLECTION (NEW MODERN)-MODEL: VELITRA ELECTROPLATED TO MATCH BRASS FINISH

handle as per IMAGE-A X

1'-4"

11"

6mm brass inlay flushed with the veneer surface

SIDE TABLE 1 - SIDE ELEVATION

3" 4

1'-4" 1 2"

1" 12

1 2"

1'-4"

3" 4

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL

1'-6"

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL 18mm plywood finished with veneer in horizontal grain as per architect's spec 12mm thk plywood finished with 4mm veneer on the facia in horizontal grain pull out drawer made of 18mm plywood finished with 4mm veneer in horizontal grain internally and externally.

SIDE TABLE 2 PLAN (BRASS INLAY DETAIL)

DETAIL BB

solid teak wood polished to match the veneer

DETAIL BB DETAIL BB

SIDE TABLE PLAN @ 9" FROM FFL

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

TO NOTE: ALL VENEER TO BE IN HORIZONTAL GRAIN VENEER SAMPLE TO BE APPROVED BY ARCHITECT STONE : SAINT LAURENT MARBLE

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-21-TH-WD-MASTER BED SIDETABLE-R0-01

STRUCTURE

DRAWING NAME : MASTER SIDETABLE DETAIL

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2018.12.21

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1" MB-3 PULL DOWN SHUTTER

1" 12 1'-6"

1"/ FIXED CONSOLE LENGTH TO ALIGN WITH 5'-84 T-BRASS SECTION ON THE SOFT PANELING

2 EQ

18mm plywood skirting to be finished with 75mm x 2mm brass plate

DETAIL BB

top of console to be finished with saint laurent marble with brass inlay as per BRASS INLAY DETAIL

3" 4

FIXED TV CONSOLE - A SECTION 2-2 1" 12

1"1"

3" high skirting platform to be finished with 0.75" thk saint laurent marbleon top with 6mm brass inlay as per design FIXED TV CONSOLE - A BRASS INLAY DETAIL PLAN

3" 4

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

0.75" thk saint laurent marble with brass inlays as per design and spec

1'-1"

marble and brass inlay design as per detail drawing and spec

plywood finished with veneer. refer DETAIL AA (Note:the joint between the marble and plywood to be paper joint)

DETAIL AA

18mm plywood finished with 4mm veneer as per architect's spec 12mm thk plywood finished with 4mm veneer on the facia in horizontal grain pull down shutter - 4mm grey tinted glass in aluminium trim with handle in antique brass finish. Refer IMAGE-A

DETAIL BB

0.75" thk saint laurent marble with brass inlays as per design and spec

DETAIL FF

NOTE

FIXED TV CONSOLE - A SECTION 3-3

1" 12

18mm plywood skirting to be finished with 75mm x 2mm brass plate

1" 2

DETAIL FF

1" 12

1'-10"

3" 2" 2" 2" 2" 2" 2" 2" 2" 3"

1"1"

2" 2" 2" 2" 2" 2" 2" 2" 2"

1'-8"

6mm brass inlay flushed in line with finished surface

1"/ FIXED CONSOLE LENGTH TO ALIGN WITH 5'-84 T-BRASS SECTION ON THE SOFT PANELING

A.S.C 1"

6mm groove on the veneer surface 3" 4

53 4"

1" 12

DETAIL CC

1" 3 " 2 4

DETAIL CC

FIXED TV CONSOLE - A PLAN @ 9" FROM FFL

top of console to be finished with saint laurent marble with brass inlay as per BRASS INLAY DETAIL

1 2" 1'-6"

1'-10"

1'-8"

1'-10"

pull down shutter with 4mm grey tinted glass in aluminium trim with handle (IMAGE A) in antique brass finish

openable shutter made of 12mm ply finished with 4mm veneer internally and externally in horizontal grain with 6mm brass inlays as per elevation 18mm plywood skirting to be finished with 75mm x 2mm brass plate

AMPLIFIER SIZE: 19"(W) X 9"(H) X 19"(D) TO BE CROSS-CHECKED

FIXED TV CONSOLE - A SECTION 1-1

pull down shutter with 4mm grey tinted glass in aluminium trim with handle (IMAGE A) in antique brass finish 18mm plywood skirting to be finished with 75mm x 2mm brass plate

FIXED TV CONSOLE - A ELEVATION A.S.C

1'-3"

openable shutter made of 18mm ply finished with 4mm veneer in horizontal grain internally and externally with 6mm brass inlay as per elevation and handle as per IMAGE B

pull down shutter with 4mm grey tinted glass in aluminium trim with handle (IMAGE A) in antique brass finish cut out to be made for switch box

1'-6"

1 2"

1'-1"

1 EQ EQ EQ EQ 12"

1 2" 1'-3"

1'-6"

1" 12

3" 4

top of console to be finished with saint laurent marble with brass inlay as per BRASS INLAY DETAIL

DETAIL AA

1'-3"

3" 4

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL 6mm brass inlay flushed with the veneer surface

1 EQ EQ EQ EQ 12"

A.S.C

1"/ FIXED CONSOLE LENGTH TO ALIGN WITH 5'-84 T-BRASS SECTION ON THE SOFT PANELING

plywood finished with 4mm veneer. refer (Note:the joint between the marble and plywood to be paper joint) 18mm plywood skirting to be finished with 75mm x 2mm brass plate

18mm thk plywood finished in 4mm veneer in horizontal grain internally and externally

IMAGE B BRAND-HAFELE Openable shutter Aluminium grip profile in antique brass finish Length 3000mm Order no. 126.27.910

NOTES/LEGEND

TO NOTE: ALL VENEER TO BE IN HORIZONTAL GRAIN VENEER SAMPLE TO BE APPROVED BY ARCHITECT STONE: SAINT LAURENT MARBLE

marble and brass inlay design as per detail drawing and spec 18mm plywood finished with 4mm veneer as per architect's spec 12mm thk plywood finished with 4mm veneer on the facia in horizontal grain openable shutter finished with 4mm veneer internally and externally in horizontal grain with handle in antique brass finish. Refer IMAGE-B

IMAGE A BRAND-HAFELE Pull down shutter - 4mm grey tinted glass in aluminium frame profile with handle (S.S.Hairline) in antique brass finish Order no. 563.47.013

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-21-TH-WD-MASTER BEDROOM FURNITURE-R0-02

STRUCTURE

DRAWING NAME : MASTER BEDROOM FURNITURE-CONSOLE A

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

solid teak wood polished to match the veneer

DETAIL CC

REVISION DATE: 2018.12.18

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

A.S.C

top of console to be finished 3" eq eq eq eq eq 4" eq eq eq eq eq 6" 6" 4 with 0.75" thk saint laurent marble and brass inlay as per BRASS INLAY DETAIL 6mm groove in 4mm veneer, line to match the pelmet brass plate high fronted pullout drawer made of 18mm plywood. shutter finished internally and externally with 4mm veneer and brass inlay as per elevation. openable shutter 18mm ply finished with 4mm veneer internally and externally 0.5" slit (refer DETAIL EE) 18mm plywood skirting to be finished with 75mm x 2mm brass plate 6mm brass inlay flushed TV CONSOLE - B (LOOSE FURNITURE) TV CONSOLE - B (LOOSE FURNITURE) with the veneer surface EXTERNAL SIDE ELEVATION EXTERNAL ELEVATION

2' 1'-10"

3" 4

TV CONSOLE - B SECTION 3-3

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

18mm plywood skirting to be finished with 75mm x 2mm brass plate

DESCRIPTION

1" 12

8" 1" 11" 32 2

1" 12 1"

2' 1" 1'-22

1" 2'-52

8" 3"

eq 3"

removable bottle rack made of 6mm plywood and finished internally and externally with 4mm veneer in horizontal grain as per spec 18mm plywood skirting to be finished with 75mm x 2mm brass plate

6mm brass inlay flushed with the marble surface 18mm thk plywood finished with 4mm veneer in horizontal grain internally and externally

1" 22

1" 12 1"

DETAIL DD

1" 22

18mm plywood finished with 4mm veneer as per architect's spec 25mm thk plywood finished with 4mm veneer on the facia in horizontal grain openable shutter finished with 4mm veneer internally and externally in horizontal grain with handle in antique brass finish. Refer IMAGE-B

removable bottle rack made of 6mm plywood and finished internally and externally with 4mm veneer in horizontal grain as per spec

DETAIL CC

3 4 TV CONSOLE - B (LOOSE FURNITURE) PLAN @ 9" FROM FFL

openable shutter to be made of 18mm plywood finished internally and externally with 4mm veneer in horizontal grain as per elevation

NOTES/LEGEND

TO NOTE: ALL VENEER TO BE IN HORIZONTAL GRAIN VENEER SAMPLE TO BE APPROVED BY ARCHITECT STONE: SAINT LAURENT MARBLE

DETAIL EE slit opening detail

MINI FRIDGE LG CODE: GL-B051RDSU, 45L 17.4"(W) X 17.7" (D) X 19.7" (H)

DETAIL CC

marble and brass inlay design as per detail drawing and spec

1" 2

3 1" 1'-102 1" 1'-52

solid teak wood polished to match the veneer

DETAIL CC

0.5" opening for the slit made on plywood finished with 4mm veneer as per detail

A.S.C

11 2"

18mm thk plywood finished in 4mm veneer in horizontal grain internally and externally

top of console to be finished with 0.75 thk saint laurent marble with 6mm brass inlay

1'-4"

3" 1" 4 1" 1'-102

1" 2'-52

MINI FRIDGE LG CODE: GL-B051RDSU, 45L 17.4"(W) X 17.7" (D) X 19.7" (H)

NOTE

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL aluminium grip profile handle in antique brass finish (refer IMAGE B) openable shutter to be made of 18mm plywood finished internally and externally with 4mm veneer in horizontal grain as per elevation cutout to be made to provide socket and switch

TV CONSOLE - B BRASS INLAY DETAIL PLAN 4

1" 1"

1'-7"

DETAIL DD

Socket + switch point to be provided for the refrigerator

1" eq

18mm plywood skirting to be finished with 75mm x 2mm brass plate

TV CONSOLE - B SECTION 4-4

MINI FRIDGE LG CODE: GL-B051RDSU, 45L 17.4"(W) X 17.7" (D) X 19.7" (H)

1 2"

3" 4

2' 1" 2'-52

eq eq

eq eq eq eq

1" 1'-22

removable bottle rack made of 6mm plywood and finished internally and externally with 4mm veneer in horizontal grain as per spec

glass front inner pullout drawer (refer IMAGE D)

A.S.C 1"

3" 1" 2'-52

TV CONSOLE - B (LOOSE FURNITURE) INTERNAL ELEVATION

2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"

DETAIL DD 1"

2' 1'-10"

1" 3'-42

1 23 4"1"12" 1'-9"

1" 2'-52

11" 2

A.S.C

3" 4

top of console to be finished with 0.75" thk saint laurent marble and brass inlay as per BRASS INLAY DETAIL aluminium grip profile handle in antique brass finish (refer IMAGE B) inner pullout drawer with glass front (refer IMAGE D) made of 18mm plywood finished with 4mm veneer internally and externally

top of console to be finished with saint laurent marble and brass inlay as per BRASS INLAY DETAIL

1" 1'-102

A.S.C

IMAGE B BRAND-HAFELE Openable shutter Aluminium grip profile in antique brass finish Length 3000mm Order no. 126.27.910

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-21-TH-WD-MASTER BEDROOM FURNITURE-R0-03

STRUCTURE

DRAWING NAME : MASTER BEDROOM FURNITURE-CONSOLE B

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2018-03-01

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

IMAGE D Glass front drawer

REVISION DATE: 2018.12.18

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

6'-7"

FIXED HEADBOARD AS PER THE MASTER BEDROOM INTERNAL ELEVATION DRG

DETAIL A

18mm THK PLYWOOD FINISHED WITH 4mm VENEER WITH HORIZONTAL GRAIN INTERNALLY AND EXTERNALLY

R-

SOLID WOOD SECTION(PROFILE AS PER DETAIL)

FIXED HEADBOARD AS PER THE MASTER BEDROOM INTERNAL ELEVATION DRG

DETAIL A

6'-1"

FIXED HEADBOARD AS PER THE MASTER BEDROOM INTERNAL ELEVATION DRG

6mm BRASS INLAY BED BASE SIDES IN 18mm PLYWOOD FINISHED WITH VENEER AS PER ARCHITECT SPEC.

10"

1 1 1" 24" 24" 1"

1'-6"

8" HIGH MATTRESS AS PER ARCH SPEC (6'0" x 6'6")

SKIRTING TO BE FINISHED WITH 75mm x 2mm BRASS PLATE

SIDE ELEVATION

VENEER TO WRAP ON THE TOP OF THE BEDBASE PLYWOOD BY 5"

PLAN

DETAIL A

FIXED HEADBOARD AS PER THE MASTER BEDROOM INTERNAL ELEVATION DRG

1'-6"

8" HIGH MATTRESS AS PER ARCH SPEC (6'0" x 6'6")

1 1 1" 24" 24" 1"

6mm BRASS INLAY BED BASE SIDES IN 18mm PLYWOOD FINISHED WITH VENEER AS PER ARCHITECT SPEC.

NECESSARY FRAMEWORK AS PER CARPENTER'S RECOMMENDATION.

SECTION AA'

1'-6"

SKIRTING TO BE FINISHED WITH 75mm x 2mm BRASS PLATE

8" HIGH MATTRESS AS PER ARCH SPEC (6'0" x 6'6")

10"

BED BASE IN 18mm PLYWOOD FINISHED WITH VENEER AS PER ARCHITECT SPEC.

SKIRTING TO BE FINISHED WITH 75mm x 2mm BRASS PLATE

FRONT ELEVATION NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

TO NOTE: ALL VENEER TO BE IN HORIZONTAL GRAIN VENEER SAMPLE TO BE APPROVED BY ARCHITECT STONE : SAINT LAURENT MARBLE

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-15-TH-FD-MASTER BED COT-R0

STRUCTURE

DRAWING NAME : MASTER BED COT DETAIL

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2018-12-14

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

3'-4" 12 equal parts with 6mm brass inlay/wooden beading 1 1 1 1 1 1 1 1 1 1 1 1 1 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 1 4" 1' 6'-10"/A.S.C

6mm thk antique brass as T sections in the plywood panel. T sections to extrude from finished surface by 4mm, equidistant not more than 7"

12mm plywood paneling wrapped with 4mm thick foam and fabric as per spec (to stop at the skirting lvl)

1"/aligned with 1'-02 the headboard design 12 equal parts with 6mm brass inlay/wooden beading 3'-4"

3" high skirting flushed in line with the finished surface with 4mm groove at the junction

1" 12

12 equal parts with 6mm brass inlay/wooden beading 3'-4"

1" 4

6mm x 25mm walnut wood beading

1 1 1 1 1 1 1 1 1 1 1 1 1 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4"

PLAN (Panel A) SLIDING WINDOW PANEL DETAIL

PLAN (Panel B) SLIDING WINDOW PANEL DETAIL 18mm plywood finished with 4mm veneer as per spec with 6mm wooden beading as per drg.to house guides for sliding mechanism

12mm plywood paneling on wall surface around the windows, wrapped with 4mm thick foam and fabric as per spec, 6mm thk antique brass as T sections, T sections to extrude from finished surface by 4mm as per elevation

13 4"

41 4"

1" 3" 24 4

12mm plywood pelmet made with neccesary framework finished with 4mm veneer

DETAIL D

1 54"

1" 12

6mm x 12mm antique brass finish beading extruded from finished fabric surface by 4mm

6mm x 6mm teak wood beading polished one shade darker to the veneer used as per spec(extrude from finished surface by 4mm)

To note: The finished pelmet surface to align with the finished surface of the paneling

6mm thk antique brass inlay as T sections in the plywood panel. T sections to extrude from finished surface by 4mm.

1"/aligned with 1'-02 the headboard design

12mm plywood pelmet finished with 6mm antique brass finish edge plate extruded by 4mm finished from finished surface of Wall Paper as per spec - pelmet surface to be finished with patti and oil primer

1' 1'

6'-10"/A.S.C

6mm x 25mm walnut wood beading

3" 4

A.S.C

1 4"

3'-4" 12 equal parts with 6mm brass inlay/wooden beading 1 1 1 1 1 1 1 1 1 1 1 1 1 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4" 3" 4"

18mm plywood finished with 4mm veneer recessed from finish panel level to house sliding guide

6mm x 6mm antique brass finish sections extruded from veneer surface level by 4mm

DETAIL C SLIDING WINDOW PANEL - FIXED HEADBOARD DETAIL NOTE

REVISION COLUMN DATE NO.

DESCRIPTION

CONSULTANT TEAM

PROJECT TITLE : TH BISHOP GARDEN

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2018-12-05-TH-WD-MASTER BEDROOM INTERNAL ELEVATION-R0-04

SPECIFICATIONS:

STRUCTURE

DRAWING NAME : MASTER BEDROOM INTERNAL ELEVATION-DETAIL

VENEER PANELING: ALL VENEER TO BE IN HORIZONTAL GRAIN.

ELECTRICAL

REVISION NO.: R0

SKIRTING MARBLE: SILVER RIVEIRA

PLUMBING

START DATE.: 2018-03-01

WALLPAPER: AS PER ARCHITECT'S SPEC.

MECHANICAL

SCALE : NTS

PAINT FINISH: ASIAN PAINTS:CODE: L152 (CREAM PIE)

SECURITY

DRAWN :

NOTES/LEGEND

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

1.75" thick fixed headboard made of 12mm plywood made with necessary framework finished with 1" foam and fabric as per design. Panel edge to be finished with 6mm antique brass plate

REVISION DATE: 2018.12.05

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

3'-6" 2'-2"

3" 4

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

3" 4

1 2"

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-3"

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

EQ 1" 12

HANDLE AS PER IMAGE-A

PUSH TO OPEN DRAWERS

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 12

R1 2"

1" 2'-12

1" 12

1" 62

ELEVATION

DETAIL A

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 62

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

1'-8"

1'-11"

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

DRAWER INTERNALS TO BE MADE OF 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

2'-6"

R1 4"

2'-6"

DETAIL A

3" 4

1" 12

HANDLE AS PER IMAGE-A

1" 12

1" 34

1" 12

SECTIONAL ELEVATION AA'

1" 12

3'-6" 1" 62

1" 12

1" 2'-12

1" 62

1" 12

IMAGE-A DRAWER HANDLE: 1.5" DIA KNOB AS PER THE IMAGE IN SATIN MATTE ROSE GOLD FINISH

1" 12

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

1" 34

1'-3"

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

PLAN

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

3'-6" 1" 12

1" 62

1" 2'-12

1" 62

1" 12

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

1" 12

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

1" 12

1" 34

1'-3"

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

KAUSI WARDROBE - DRESSER - 1 NO. PLAN @ 9" FROM FFL

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-06

STRUCTURE

DRAWING NAME :KAUSI WARDROBE-DRESSER

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

3'-6"

3'-6" 1'-8" 1'-8"

3" 4

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

DETAIL A

DETAIL B

18mm x 18mm MS HOLLOW SECTION POWDER COATED BLACK

11"

18mm x 18mm MS HOLLOW SECTION POWDER COATED BLACK

6mm THK MS BASE PLATE POWDER COATED BLACK, BASE PLATE TO BE FLUSHED IN LINE WITH THE FINISHED SURFACE AT THE BOTTOM

6mm THK MS PLATE POWDER COATED BLACK

ELEVATION

6mm THK MS PLATE POWDER COATED BLACK

SECTIONAL ELEVATION AA'

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

3'-6"

3'-6" 2'-4"

1'-9"

1'-2"

1'-9"

6mm THK MS BASE PLATE POWDER COATED BLACK, BASE PLATE TO BE FLUSHED IN LINE WITH THE FINISHED SURFACE AT THE BOTTOM

1'-8"

10"

6mm THK MS PLATE POWDER COATED BLACK

1'-3"

18mm x 18mm MS HOLLOW SECTION POWDER COATED BLACK

1'-3"

2'-6"

1'-6"

1'-3"

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1" 52

2'-8"

1" 52

10"

VISHAL ROOM - CENTRE TABLE - 1NO. PLAN

VISHAL ROOM - CENTRE TABLE - 1NO. PLAN @ 9" FROM FFL

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL 0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1 4"

1 2" 1 4"

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

6mm THK MS BASE PLATE POWDER COATED BLACK, BASE PLATE TO BE FLUSHED IN LINE WITH THE FINISHED SURFACE AT THE BOTTOM

DETAIL B

DETAIL A NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

6mm BRASS INLAY AS PER DETAIL

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-07

STRUCTURE

DRAWING NAME : VISHAL ROOM-CENTRE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1'-6"

3" 4

1'-10"

3" 4

DETAIL A 1 4"

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

DETAIL B 6mm THK MS BASE PLATE POWDER COATED BLACK, BASE PLATE TO BE FLUSHED IN LINE WITH THE FINISHED SURFACE AT THE BOTTOM

DETAIL B

1'-6"

1'-5"

1'-6"

6mm THK MS BASE PLATE POWDER COATED BLACK, BASE PLATE TO BE FLUSHED IN LINE WITH THE FINISHED SURFACE AT THE BOTTOM

1.5" DIA MS HOLLOW SECTION POWDER COATED BLACK

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1 2"

ELEVATION

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

DETAIL A

1 4"

6mm THK MS PLATE FINISHED IN POWDER COATED BLACK

SECTIONAL ELEVATION AA'

1'-10"

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1.5" DIA MS HOLLOW SECTION POWDER COATED BLACK

3" R4

1'-4"

6mm THK MS PLATE FINISHED IN POWDER COATED BLACK 6mm THK MS BASE PLATE POWDER COATED BLACK

VISHAL ROOM - LIVING SIDE TABLE - 2NOS. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

VISHAL ROOM - LIVING SIDE TABLE - 2NOS. PLAN @ 9" FROM FFL NOTES/LEGEND TO NOTE : MARBLE : 0.75" THK BLACK MARQUINA MARBLE HOLLOW MS SECTION AND BASE PLATE NEEDS TO BE SCREWED TO EACH OTHER

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-08

STRUCTURE

DRAWING NAME : VISHAL ROOM -

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

LIVING SIDE TABLE

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

5' 3" 4

1'-10"

3" 4

1'-10"

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1'-6"

1" 12

1'-10"

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

DRAWER INTERNALS TO BE MADE OF 12mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

CARCASS : 18mm MDF FINISHED IN MATTE GREY LACQUER PAINT INTERNALLY AND EXTERNALLY

2'-8" 1'-10"

2'-1"

2'-8"

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY PUSH TO OPEN DRAWERS

1" 12

CARCASS : 18mm MDF FINISHED IN MATTE GREY LACQUER PAINT INTERNALLY AND EXTERNALLY

PUSH TO OPEN

1" 12

PUSH TO OPEN

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

TIE MEMBERS 38mm x 3mm MS SECTION POWDER COATED BLACK SCREWED TO BOX

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1" 62

1" 3'-72

1" 62

1" 12

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

R1 2"

1" 12

ELEVATION

1" 12

SECTIONAL ELEVATION AA' 5'

1" 62

1" 3'-72

1" 62

1" 12

TIE MEMBERS 38mm x 3mm MS PLATE POWDER COATED BLACK

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1" 32

1'-3"

1'-6"

1" 32

1" 12

0.75" THK BLACK MARQUINA MARBLE AS PER DETAIL

1" 12

CARCASS : 18mm MDF FINISHED IN MATTE GREY LACQUER PAINT INTERNALLY AND EXTERNALLY

A' PLAN

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

1" 3'-72

1" 62

1" 12

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1" 12

TIE MEMBERS 38mm x 3mm MS PLATE POWDER COATED BLACK

DESCRIPTION

1" 12

1" 12 NOTE

1" 62

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1" 32

1'-3"

1'-6"

1" 32

1" 12

VISHAL ROOM - STUDY DESK - 1 NO. PLAN @ 9" FROM FFL

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-11

STRUCTURE

DRAWING NAME : VISHAL ROOM - STUDY DESK

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

6' 3" 4

2'-4"

3" 4

2'-4"

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-6"

1" R4

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

1'-8"

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1" 62

1" 4'-72

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 12

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 62

DRAWER INTERNALS TO BE MADE OF 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY TIE MEMBERS 38mm x 3mm MS SECTION POWDER COATED BLACK SCREWED TO BOX

2'-6" 1'-8"

1'-11"

2'-6"

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

DETAIL A

1" 12

PUSH TO OPEN

1" 12

PUSH TO OPEN DRAWERS PUSH TO OPEN

R1 2"

1" 12

ELEVATION

1" 12

SECTIONAL ELEVATION AA' 6'

1" 62

1" 4'-72

1" 12

TIE MEMBERS 38mm x 3mm MS SECTION POWDER COATED BLACK

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 32

1'-3"

1'-6"

1" 32

1" 12

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

PLAN

6' 1" 62

1" 62

1" 4'-72

1" 12

TIE MEMBERS 38mm x 3mm MS SECTION POWDER COATED BLACK

LEGS : 38mm x 8mm MS SECTION POWDER COATED BLACK

1 2"

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

3" 4

1'-3"

1'-6"

1" 32

1" 12

1" 32

PUSH TO OPEN DRAWERS

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

VIKAS ROOM - STUDY DESK - 1 NO. PLAN @ 9" FROM FFL REVISION COLUMN DATE NO.

DESCRIPTION

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

DETAIL A

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-12

STRUCTURE

DRAWING NAME : VIKAS ROOM - STUDY DESK

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE : 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DRAWER SHUTTER : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

4' 3" 4

1'-4"

3" 4

1'-4"

CARCASS : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-6"

PUSH TO OPEN DRAWERS

7" CARCASS : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" R4

1" 12

2'-6"

DRAWER INTERNALS TO BE MADE OF 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

1'-8"

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

1'-8"

1'-11"

2'-6"

DRAWER SHUTTER : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

DETAIL A

1" 12

PUSH TO OPEN DRAWER

1" 12

PUSH TO OPEN DRAWERS PUSH TO OPEN DRAWER

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 62

1" 2'-72

1" 12

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

R1 2"

1" 12

ELEVATION

1" 12

SECTIONAL ELEVATION AA' 4' 1" 62

1" 62

1" 2'-72

1" 12

1 2"

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

CARCASS : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

3" 4

1'-3"

1'-6"

1" 32

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

PUSH TO OPEN DRAWERS

DRAWER SHUTTER : 18mm MDF FINISHED IN MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

1" 32

CARCASS : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

DETAIL A

A' PLAN 4' 1" 62

1" 62

1" 2'-72

CARCASS : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1" 12

1 2" 12"

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

1" 12 2"

1" 32 1" 12 THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

LEGS : 38mm x 8mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH

KAUSI ROOM - STUDY DESK - 1 NO. PLAN @ 9" FROM FFL

NOTE

DRAWER SHUTTER : 18mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

TIE MEMBERS 38mm x 3mm SS PLATE ELECTROPLATED TO ROSE GOLD FINISH SCREWED TO BOX

1'-3"

1'-6"

1" 32

1" 12

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-13

STRUCTURE

DRAWING NAME : KAUSI ROOM - STUDY DESK

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

13 4"

1" 32

1" 22

TOP AND SIDE SURFACE TO BE FINISHED WITH 0.75" THK SAINT LAURENT MARBLE AND BRASS INLAY AS PER DETAIL

1" 22

1" 1'-22

1" 32

1" 21" 12 2

1" 22

1" 32

1" 1'-22

1" 32

1" 1'-22

0.75" THK SAINT LAURENT MARBLE WITH BRASS INLAY AS PER DETAIL

1 2"

1" 32

TOP AND SIDE SURFACE TO BE FINISHED WITH 0.75" THK SAINT LAURENT MARBLE AND BRASS INLAY AS PER DETAIL

13 4"

1" 22

1" 32

1" 34

33 4"

1" 22

DETAIL A

1" 32

1" 1'-02

1" 32

6mm BLACK GLASS ON SIDES AS PER ELEVATION, FINISHED SURFACE TO BE IN LINE WITH THE MARBLE (REFER DETAIL A)

1" 32

12mm PLYWOOD FINISHED WITH 6mm BLACK OPAQUE GLASS ON SIDES AS PER ELEVATION, FINISHED SURFACE TO BE IN LINE WITH THE MARBLE (EDGE POLISHED)

ELEVATION C

6mm BRASS INLAY AS PER ELEVATION

1" 32

23 4"

TOP AND SIDE SURFACE TO BE FINISHED WITH 0.75" THK SAINT LAURENT MARBLE AND BRASS INLAY AS PER DETAIL

3" 4 1" 22 1" 22

BOXING USING 18mm THICK PLYWOOD WITH NECCESARY FRAMEWORK AS PER CARPENTER SUGGESION

DETAIL A

DETAIL A 6mm BLACK GLASS ON SIDES AS PER ELEVATION, FINISHED SURFACE TO BE IN LINE WITH THE MARBLE (REFER DETAIL A)

B SECTION AA'

18mm PLYWOOD SKIRTING TO BE FINISHED WITH 50mm x 2mm BRASS PLATE

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

1" 22

1" 32

1" 22

13 4"

1" 22

1" 32

1" 22

1" 32

23 4"

1" 32

1" 22

1" 32

1" 22

1" 32

TOP AND SIDE SURFACE TO BE FINISHED WITH 0.75" THK SAINT LAURENT MARBLE AND BRASS INLAY AS PER DETAIL

3" 4

1" 32

ELEVATION D

1" 22

18mm PLYWOOD SKIRTING TO BE FINISHED WITH 50mm x 2mm BRASS PLATE

ELEVATION A

1" 32

1 4"

18mm PLYWOOD SKIRTING TO BE FINISHED WITH 50mm x 2mm BRASS PLATE

ELEVATION B

1" 22

1" 32

18mm THICK PLYWOOD

6mm BLACK GLASS ON SIDES AS PER ELEVATION, FINISHED SURFACE TO BE IN LINE WITH THE MARBLE (REFER DETAIL A)

1" 32

6mm BRASS INLAY AS PER ELEVATION

23 4"

1" 32

6mm BRASS INLAY FLUSHED WITH THE MARBLE SURFACE

TOP AND SIDE SURFACE TO BE FINISHED WITH 0.75" THK SAINT LAURENT MARBLE AND BRASS INLAY AS PER DETAIL

6mm BRASS INLAY FLUSHED WITH THE MARBLE SURFACE

13 4"

SIDES AS PER ELEVATION

18mm PLYWOOD SKIRTING TO BE FINISHED WITH 50mm x 2mm BRASS PLATE

HOME THEATRE - CENTER TABLE - 1NO. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

TO NOTE : BRASS INLAY ON THE SIDES TO BE CONTINUED FROM THE TOP SURFACE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-14

STRUCTURE

DRAWING NAME : HOME THEATRE-CENTRE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

MARBLE : 0.75" THK SAINT LAURENT MARBLE

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

12mmX12mm HOLLOW SECTION IN ANTIQUE BRASS FINISH

18mm PLYWOOD FINISHED WITH 0.5" SOFT FOAM AND FABRIC AS PER ARCITECT'S SPEC

8mm THK SOLID BRASS ROD FIXED TO MAIN BRASS SECTION WITH EQUIDISTANT OF NOT MORE THAN 2.5"

6mm MDF FINISHED WITH MATTE LACQUER PAINT TO MATCH THE FABRIC COLOUR 8mm THK SOLID BRASS ROD FIXED TO MAIN BRASS SECTION WITH EQUIDISTANT OF NOT MORE THAN 2.5"

1 2"

1'-6"

6mm X 50mm SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN BRASS SECTION

18mm PLYWOOD FINISHED WITH 1.5" THK 32 DENSITY FOAM WRAPPED WITH 0.5" SOFT FOAM AND FABRIC AS PER ARCITECT'S SPEC

1" 1" 12 2 5"

18mm PLYWOOD FINISHED WITH 0.5" SOFT FOAM AND FABRIC AS PER ARCITECT'S SPEC

1 1" 2"2

1'-6"

1 2"

6" 1 32"

18mm PLYWOOD FINISHED WITH 1.5" THK 32 DENSITY FOAM WRAPPED WITH 0.5" SOFT FOAM AND FABRIC AS PER ARCITECT'S SPEC

12mmX12mm HOLLOW SECTION IN ANTIQUE BRASS FINISH

SECTION A-A'

ELEVATION 1'-6"

1'-6"

1'-4"

1'-6"

A 1'-4"

18mm PLYWOOD FINISHED WITH 1.5" THK 32 DENSITY FOAM WRAPPED WITH 0.5" SOFT FOAM AND FABRIC AS PER ARCITECT'S SPEC

8mm THK SOLID BRASS ROD FIXED TO MAIN BRASS SECTION WITH EQUIDISTANT OF NOT MORE THAN 2.5"

6mm X 50mm SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN BRASS SECTION

12mmX12mm HOLLOW SECTION IN ANTIQUE BRASS FINISH

INFORMAL LIVING - POUFFE - 2 NO.S PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

PLAN @ 9" FROM FFL NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-15

STRUCTURE

DRAWING NAME : INFORMAL LIVING-POUFFE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

REFERENCE IMAGE

DETAIL A

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC FIXED OVER THE 6mm THK SS PLATE 1.5" DIA HOLLOW BRASS ROD IN ANTIQUE BRASS FINISH

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

2" 1"

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

6mm THK SS PLATE ELECTRO -PLATED TO ANTIQUE BRASS IN MATTE LACQUER FINISH

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC 2"

SECTION A-A'

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED FOR EVERY PROFILE LEG

ELEVATION A

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

C 9" 1 2"

1" 12

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

1' 2" 1"

1" 2

9" 11" 2

43 4"

1 2"

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

1 2"

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

D 1'

1" 34 1" 12

1 2"

2" 1"

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED FOR EVERY PROFILE LEG

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

51" 2

1" 2

2'-6"

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

ELEVATION C

1" 2

3" 1 2"

1" 2

1" 12

HOLLOW BRASS SECTION REFER MODULE SIZE

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

2'-6"

6mm THK,SS PLATE ELECTRO -PLATED TO ANTIQUE BRASS IN MATTE LACQUER FINISH WELDED TO BRASS SECTION

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED FOR EVERY PROFILE LEG

ELEVATION B

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

2" 1"

HOME OFFICE- CENTRE TABLE-1 NO. PLAN

25mm PLY FINISHED WITH VENEER ON ALL THE SIDES AS PER ARCHITECT'S SPEC

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED FOR EVERY PROFILE LEG

ELEVATION D

6mm THK,SS PLATE ELECTRO -PLATED TO ANTIQUE BRASS IN MATTE LACQUER FINISH WELDED TO BRASS SECTION

2'-6" 1 2"

9" 1" 54

1.5" DIA HOLLOW BRASS ROD IN ANTIQUE BRASS FINISH

HOLLOW BRASS SECTION IN ELEVATION AS PER MODULE SIZE

REVISION COLUMN DATE NO.

DESCRIPTION

NOTES/LEGEND HOLLOW BRASS MODULE SIZE: 0.75" X 0.75" HOLLOW BRASS SECTION IN ANTIQUE FINISH 1" X 0.75" HOLLOW BRASS SECTION IN ANTIQUE FINISH 1.5" X 0.75" HOLLOW BRASS SECTION IN ANTIQUE FINISH

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-01

STRUCTURE

DRAWING NAME : HOME OFFICE-CENTRE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DETAIL B

INNER SIDES OF THE CENTRE TABLE18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN HIGH GLOSS MIRROR FINISH

DETAIL A

TOP SURFACE- 18mm PLYWOOD FINISHED WITH POLISHED SAINT LAURENT MARBLE

SIDES OF THE CENTRE TABLE- 18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN SATIN MATTE FINISH

REFERENCE IMAGE

SKIRTING- 18mm PLYWOOD TO BE FINISHED WITH 4mm VENEER AS PER ARCHITECT'S SPEC 4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

SECTION A-A'

INNER SIDES OF THE CENTRE TABLE18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN HIGH GLOSS MIRROR FINISH

TOP SURFACE- 18mm PLYWOOD FINISHED WITH POLISHED SAINT LAURENT MARBLE

SIDES OF THE CENTRE TABLE- 18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS IN SATIN MATTE FINISH SIDES OF THE CENTRE TABLE- 18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN SATIN MATTE FINISH

SKIRTING- 18mm PLYWOOD TO BE FINISHED WITH 4mm VENEER AS PER ARCHITECT'S SPEC

TYPICAL ELEVATION

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

3'-6" 1'-6"

TOP SURFACE- 18mm PLYWOOD FINISHED WITH POLISHED SAINT LAURENT MARBLE

A 1'-6"

TOP SURFACE- 18mm PLYWOOD FINISHED WITH POLISHED SAINT LAURENT MARBLE

CENTRAL PART-INNER SIDES18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN HIGH GLOSS MIRROR FINISH

TOP SURFACE- 18mm PLYWOOD FINISHED WITH POLISHED SAINT LAURENT MARBLE

3" 4

TO NOTE:THE BRASS PLATE AND THE MARBLE TO BE FLUSHED IN LINE

3" 4

TO NOTE:THE BRASS PLATE AND THE MARBLE TO BE FLUSHED IN LINE

3" 4

3'-6"

INNER SIDES OF THE CENTRE TABLE18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN HIGH GLOSS MIRROR FINISH

SIDES OF THE CENTRE TABLE- 18mm PLYWOOD FINISHED WITH 3mm THK ANTIQUE BRASS PLATE IN SATIN MATTE FINISH

FORMAL LIVING- CENTRE TABLE-1 NO. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

DETAIL B

DETAIL A NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-02

STRUCTURE

DRAWING NAME : FORMAL LIVING- CENTRE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

0.75" THK POLISHED STATURIO MARBLE 6mm BRASS INLAY ON POLISHED STATURIO MARBLE AS PER DESIGN 12mm PLYWOOD FINISHED WITH 6mm BLACK OPAQUE GLASS , EDGE POLISHED

TOP SURFACE FINISHED WITH POLISHED STATURIO MARBLE AND BLACK OPAQUE GLASS AS PER DRAWING

REFERENCE IMAGE

6mm BLACK OPAQUE GLASS, EDGE POLISHED

TOP FRAME: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

SECTION A-A'

3mm THK, 12mm WIDE SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN SUPPORT FRAMEWORK

TOP FRAME: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

CUT OUT/NO INFILL

1'-4"

1'-6"

TOP FRAME: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

NOTE: BRASS INLAY AS PER DRAWING

ELEVATION

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

0.75" THK POLISHED STATURIO MARBLE

1'-5" 9" EQ

1'-5"

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

1'-5"

6mm BRASS INLAY ON POLISHED STATURIO MARBLE AS PER DESIGN

6mm BLACK OPAQUE GLASS, EDGE POLISHED

3mm THK, 12mm WIDE SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN SUPPORT FRAMEWORK 4"

1'-5"

TOP FRAME AND BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

CUT OUT/NO INFILL. REFER IMAGE

HOME OFFICE- SIDE TABLE- 1 NO. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

PLAN @ 9" FROM FFL

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-03

STRUCTURE

DRAWING NAME : HOME OFFICE-SIDE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

0.75" THK POLISHED STATURIO MARBLE 6mm BRASS INLAY ON POLISHED STATURIO MARBLE AS PER DESIGN 12mm PLYWOOD FINISHED WITH 6mm BLACK OPAQUE GLASS , EDGE POLISHED

REFERENCE IMAGE

TOP SURFACE FINISHED WITH POLISHED STATURIO MARBLE AND BLACK OPAQUE GLASS AS PER DRAWING

TOP FRAME: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

SECTION A-A'

3mm THK, 12mm WIDE SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN SUPPORT FRAMEWORK

TOP FRAME: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

1'-4"

1'-6"

NOTE: BRASS INLAY AS PER DRAWING

CUT OUT/NO INFILL

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

ELEVATION 4"

1'-8" 1'

0.75" THK POLISHED STATURIO MARBLE

6mm BLACK OPAQUE GLASS, EDGE POLISHED

1'-8"

6mm BRASS INLAY ON POLISHED STATURIO MARBLE AS PER DESIGN

3mm THK, 12mm WIDE SS PLATE ELECTROPLATED TO ANTIQUE BRASS FINISH WELDED TO THE MAIN SUPPORT FRAMEWORK

BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

1'-8"

TOP FRAME AND BOTTOM LEGS: 6mm X 25mm SOLID ANTIQUE BRASS SECTION IN SATIN MATTE FINISH

1'-8"

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

CUT OUT/NO INFILL. REFER IMAGE

LIVING - SIDE TABLE- 2 NO. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

PLAN @ 9" FROM FFL NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-04

STRUCTURE

DRAWING NAME : LIVING-SIDE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1'-8" EQ

CARCASS: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-3"

DRAWER SHUTTER: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT

1'-6"

4mm VENEER FIXED TO DRAWER FACIA IN GRID PATTERN AS PER DESIGN

3" HIGH SKIRTING - 18mm MDF FINISHED WITH MATTE BLACK LACQUER

DRAWER INTERNALS TO BE MADE OF 12mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY 4mm VENEER FIXED TO DRAWER FACIA IN GRID PATTERN AS PER DESIGN

PUSH TO OPEN DRAWER

DRAWER SHUTTER: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT

1 4"

3" 4

PUSH TO OPEN DRAWER

1 EQ 4" EQ

1'-3" 1'-6"

1'-4" 1" 1'-22

3" 4

ELEVATION

3" HIGH SKIRTING - 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT

SECTION AA' 1'-8"

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

TOP SURFACE FINISHED IN MATTE BLACK LACQUER 1'-4"

CARCASS AND SIDES - 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY DRAWER SHUTTER: 18mm MDF FINISHED MATTE BLACK LACQUER PAINT (PUSH TO OPEN DRAWER)

SIDES: 18mm MDF FINISHED MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

SIDES: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

A' VISHAL BEDROOM - SIDE TABLE - 2NOS. (MIRRORED) PLAN

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND - 4mm VENEER IN VERTICAL GRAIN - 4mm VENEER IN HORIZONTAL GRAIN

4mm VENEER FIXED TO DRAWER FRONT IN GRID PATTERN

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-09

STRUCTURE

DRAWING NAME : VISHAL BEDROOM-SIDE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

DETAIL A

1'-2"

6mm THK, 2" WIDE ANTIQUE BRASS PLATE

2"- DIA SOLID TEAK WOOD LEGS POLISHED TO MATCH THE WALNUT VENEER,FIXED TO THE 6mm THK ANTIQUE BRASS PLATE

SOLID TEAK WOOD LEGS POLISHED TO MATCH THE WALNUT VENEER,FIXED TO THE 6mm THK ANTIQUE BRASS PLATE

1'-7" 1'-11"

1'-11"

1'-7"

2'-6"

DRAWERS TO BE MADE OF 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

1'-2"

2" 6mm THK, 2" WIDE ANTIQUE BRASS PLATE

SOLID TEAK WOOD LEGS POLISHED TO MATCH THE WALNUT VENEER,FIXED TO THE 6mm THK ANTIQUE BRASS PLATE

1'-7"

DRAWERS TO BE MADE OF 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

PUSH TO OPEN DRAWER

1'-6"

1'-11"

DRAWERS MADE OF 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

PUSH TO OPEN DRAWER

1'-6"

CARCASS: 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

2'-6"

3" 4

CARCASS: 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

2'-6"

CARCASS: 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

1" 52

3'-4"

3" 4

10mm x 10mm SOLID ANTIQUE BRASS SECTION

3'-1"

3'-3"

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

ELEVATION

1'-3"

1'-5"

SECTIONAL ELEVATION AA'

2mm THK BRASS CAP IN ANTIQUE FINISH TO BE SHOVED INTO THE LEGS WITH SURFACE OF SOLID WOOD LEG TO MATCH THE FINISHED SURFACE OF THE BRASS CAP

2mm THK BRASS CAP IN ANTIQUE FINISH TO BE SHOVED INTO THE LEGS WITH FINISHED SURFACE OF SOLID WOOD TO MATCH THE FINISHED SURFACE OF THE BRASS CAP

1 2"

10mm x 10mm SOLID ANTIQUE BRASS SECTION

1 2"

10mm x 10mm SOLID ANTIQUE BRASS SECTION

1'-3"

4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

1'-5"

2mm THK BRASS CAP IN ANTIQUE FINISH TO BE SHOVED INTO THE LEGS WITH SURFACE OF SOLID WOOD LEG TO MATCH THE FINISHED SURFACE OF THE BRASS CAP 4mm FELT/ RUBBER/ ACRYLIC WASHERS AS PER SAMPLE APPROVED

SIDE ELEVATION

3'-4" 3'-2"

2"- DIA SOLID TEAK WOOD LEGS POLISHED TO MATCH THE WALNUT VENEER,FIXED TO THE 6mm THK ANTIQUE BRASS PLATE

1'-4"

6mm THK, 2" WIDE ANTIQUE BRASS PLATE 10mm x 10mm SOLID ANTIQUE BRASS SECTION FINISH

DRAWERS MADE OF 18mm PLYWOOD FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

THE JUNCTION TO BE WELDED

1'-6"

CARCASS: 18mm PLYWOOD WITH 4mm VENEER FINISHED INTERNALLY AND EXTERNALLY

6mm THK, 2" WIDE ANTIQUE BRASS PLATE

A' MASTER BEDROOM - STUDY DESK - 1 NO. PLAN

2" DIA SOLID TEAK WOOD LEGS POLISHED TO MATCH THE WALNUT VENEER

1 2"

3" 4

CARCASS : 18mm MDF FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

10mm x 10mm SOLID ANTIQUE BRASS SECTION 2mm THK BRASS CAP IN ANTIQUE FINISH TO BE SHOVED INTO THE LEGS WITH SURFACE OF SOLID WOOD LEG TO MATCH THE FINISHED SURFACE OF THE BRASS CAP

PUSH TO OPEN DRAWERS

DRAWER SHUTTER : 18mm MDF FINISHED WITH 4mm VENEER INTERNALLY AND EXTERNALLY

REVISION COLUMN DATE NO. 1 xx.xx.xxx

DESCRIPTION XXXXX

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-10

STRUCTURE

DRAWING NAME : MASTER BEDROOM - STUDY DESK

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

2' 1" 1'-102

3" 4

CARCASS: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

EQ 3" 4

1'-3"

ALUMINUM GRIP PROFILE HANDLE AS PER - IMAGE A TO NOTE: DRAWERS TO BE MADE OF 12mm MDF INTERNALLY AND FINISHED WITH MATTE WHITE LACQUER PAINT

EQ 5"

ELEVATION

3" 4

SKIRTING: 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT

3" 4

DRAWER SHUTTER: 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-6"

1" 12

1'-6"

1'-3"

DRAWER SHUTTER: 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

ALUMINUM GRIP PROFILE HANDLE AS PER - IMAGE A

CARCASS: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-6" 3" 4

3" 4

SKIRTING: 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT

SECTION AA'

4mm FELT / RUBBER / ACRYLIC WASHERS AS PER SAMPLE APPROVED

CARCASS: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

1'-2"

1'-6"

CARCASS: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

DRAWER SHUTTER: 12mm MDF FINISHED WITH MATTE WHITE LACQUER PAINT INTERNALLY AND EXTERNALLY

SIDES: 18mm MDF FINISHED WITH MATTE BLACK LACQUER PAINT INTERNALLY AND EXTERNALLY

ALUMINUM GRIP PROFILE HANDLE AS PER IMAGE A

SKIRTING: 18mm MDF FINISHED IN MATTE BLACK LACQUER PAINT

IMAGE-A HAFELE ALUMINUM GRIP PROFILE HANDLE C-SHAPE IN BLACK ORDER NO : 126.36.300

VIKAS ROOM - SIDE TABLE - 2 N0S. PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-01-04-TH-FD-R0-05

STRUCTURE

DRAWING NAME : VIKAS-SIDE TABLE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-02

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE: 2019-01-04

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

2" 1 2"

12mm DIA MS SOLID SECTION POWDER COATED BLACK WELDED TO THE MS PLATE DETAIL A

50mm DIA X 3mm THICK MS PLATE POWDER COATED BLACK SCREWED TO THE STONE BELOW

1 8"

STONE AS PER SITE

STONE AS PER SITE 50mm x 50mm MS HOLLOW SECTION HANDRAIL POWDER COATED BLACK

DETAIL A BALUSTER DETAIL

12mm DIA MS SOLID SECTION POWDER COATED BLACK

10"

1 2"

12mm DIA MS SOLID SECTION POWDER COATED BLACK WELDED TO THE MS PLATE

1'10"

2'-10"

50mm DIA X 3mm THICK MS PLATE POWDER COATED BLACK SCREWED TO THE STONE BELOW

DETAIL B

50mm x 50mm MS HOLLOW SECTION HANDRAIL WELDED TO THE BALUSTER

12mm DIA MS SOLID SECTION POWDER COATED BLACK WELDED TO THE HANDRAIL

DETAIL B

2'-5"

2'-8" / A.S.C

1 2"

SECTION - AA'

CENTRE OF TREAD

1" 72

CENTRE OF TREAD

BALUSTER TO HANDRAIL FIXING DETAIL

STAIRCASE - PLAN NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO. 1

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE : 2019-03-12-TH-OUTHOUSE STAIRCASE-R0

STRUCTURE

DRAWING NAME : OUTHOUSE STAIRCASE

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-03-12

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : T/D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1" 3'-102

1" 3'-82

2" x 2" SOLID TEAK WOOD POLISHED TO MATCH THE WALNUT VENEER

10"

WOODEN LOUVERS PROCURED AS PER CARPENTER'S SUGGESTION (POLISHED TO MATCH WALNUT VENEER)

1 2" 10"

2" x 2" MAIN FRAME IN SOLID TEAK WOOD POLISHED TO MATCH THE WALNUT VENEER

1 2" 10"

2" x 2" SOLID TEAK WOOD POLISHED TO MATCH THE WALNUT VENEER

1'-73 4"

SOLID WOOD HANDLE AS PER REFERENCE IMAGE A.

WOODEN LOUVERS FIXED EQUIDISTANT WITH NOT LESS THAN 2" SPACING

1"/A.S.C 6'-54

2" 1 2"

2" SOLID WOOD HANDLE AS PER REFERENCE IMAGE A. TO NOTE: HANDLE TO BE FIXED TO THE CENTRE OF THE SHUTTER HEIGHT

WOODEN LOUVERS PROCURED AS PER CARPENTER'S SUGGESTION (POLISHED TO MATCH WALNUT VENEER)

2" x 2" MAIN FRAME IN SOLID TEAK WOOD POLISHED TO MATCH THE WALNUT VENEER 2"

TYPICAL SECTION A-A'

1" 8'-104

ELEVATION UNDER STAIRCASE SHUTTER

1 21"

10"

IMAGE A SOLID WOOD HANDLE AS PER THE IMAGE POLISHED TO MATCH THE WALNUT VENEER NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : T HOUSE

ARCHITECTURE

PROJECT CODE : TH

INTERIORS

DRAWING TITLE :

2019-01-14-TH-WD-UNDER STAIRCASE SHUTTERS-R0-01

STRUCTURE

DRAWING NAME :

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-12

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

UNDER STAIRS STORAGE SHUTTERS

REVISION DATE: 2019-01-14

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

33'-53 4"

19'

9'-9"

5'-4"

6'-1"

18'-3"

29'-5"

5'-6"

Kitchen

Dining

54'-63 4"

18'-11"

19'-5"

Kitchen

14'-6"

12'-9"

5'-6"

15'

32'-8"

Dining

Cash Counter Bill Counter

Cash Counter

SHOP FRONT

11'-3"

23'-6"

11'-2"

19'

EXISTING PLAN

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : P HOTEL

ARCHITECTURE

PROJECT CODE : PH

INTERIORS

DRAWING TITLE : 2019-02-15-PH-LA-R0-01

STRUCTURE

DRAWING NAME : LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-23

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

Dining 18'-8"

25'-1"

33'-10"

18'-81 4"

Dining

8'-2"

EXISTING FIRST FLOOR PLAN

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : P HOTEL

ARCHITECTURE

PROJECT CODE : PH

INTERIORS

DRAWING TITLE : 2019-02-15-PH-LA-R0-02

STRUCTURE

DRAWING NAME : LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-23

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

33'-53" 4

19'

Kitchen 9'-9"

5'-4"

6'-1"

18'-3"

29'-5"

5'-6"

Kitchen

Dining

3 54'-64"

18'-11"

19'-5"

Dining

14'-6"

12'-9"

5'-6"

32'-8"

Dining

15'

Dining

Cash Counter

BILL COUNTER

1'2"

Cash Counter

11'

1 5'-2 " 2

JUICE SHOP AND CHAT

5'-21" 2

2'-91" 2

SHAWARMA GRILL BARBEQUE

2'6"

5'-4"

2'6"

1'-71" 2

111" 4

1'-21" 2

8'-10"

111" 4

FRONT SHOP

PROPOSED PLAN 8'

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : P HOTEL

ARCHITECTURE

PROJECT CODE : PH

INTERIORS

DRAWING TITLE : 2019-02-15-PH-LA-R0-03

STRUCTURE

DRAWING NAME : PROPOSED LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-23

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : D

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

35'-7"

A' A

Height - 7'3" floor to beam bottom

Height - 12' floor to ceiling

Height - 7'10" floor to false ceiling Height - 8'3" floor to true ceiling

EXISTING PLAN

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO. 1 xx.xx.xxx

DESCRIPTION XXXXX

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : MERCEDES BENZ

ARCHITECTURE

PROJECT CODE : MB

INTERIORS

DRAWING TITLE : 2019-01-29-MB-LA-R0

STRUCTURE

DRAWING NAME : LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-12

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : A

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

35'-7"

A' A

ASC

8'-7"

1" 8'-44

8'-7"

Height - 7'3" floor to beam bottom

Height - 12' floor to ceiling

Height - 7'10" floor to false ceiling Height - 8'3" floor to true ceiling

PROPOSED PLAN

NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO. 1 xx.xx.xxx

DESCRIPTION XXXXX

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : MERCEDES BENZ

ARCHITECTURE

PROJECT CODE : MB

INTERIORS

DRAWING TITLE : 2019-01-29-MB-LA-R0

STRUCTURE

DRAWING NAME : LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-12

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : A

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

12'

8'-4"

7'-10"

7'-3"

7" RAISED PLATFORM AT SIDES SKIRTING

4'-6"

7'-3"

12'

SECTION AA'

7" HIGH RAISED PLATFORM

TYPICAL DETAIL OF EACH CUBICAL

SECTION BB' NOTE THIS DRAWING IS IN THE IMPERIAL SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO. 1 xx.xx.xxx

DESCRIPTION XXXXX

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : MERCEDES BENZ

ARCHITECTURE

PROJECT CODE : MB

INTERIORS

DRAWING TITLE : 2019-01-29-MB-LA-R0

STRUCTURE

DRAWING NAME : LAYOUT

ELECTRICAL

REVISION NO.: R0

PLUMBING

START DATE.: 2019-01-12

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:

CHKD : A

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

UP UP

POOL FILTRATION PLANT BELOW

POOL -995

LOWER POOL DECK +350

POOL DECK +350

stub wall civil seat

BATH 01 2900 X 2150 MM +600

SHOWER +350

POWDER ROOM 1800 X 2500 MM +600

SUNKEN SLAB @250

BEDROOM 01 4980 X 3650 MM +600

3050 X 1800 MM UP

ENTRY FOYER 4100 X 1700 MM +450

ENTERTAINMENT ROOM 6200 X 6860 MM +600

PORCH +450

UP +600

foos ball table

OPEN BAR +600

NICHE

COURTYARD +350

LIVING 8750 X 7200 MM +450

civil seat

stub wall

fixed shelving

1100 X 2980 MM

ENTRANCE FFL +00

OPEN TO SKY

+500 SUNKEN SLAB @250

BATH 02 2800 X 2000 MM +600

COURTYARD 5320 X 2850 MM +500 OPEN TO SKY

STORE 1500 X 2850 MM +600

SKYLIGHT

STAIRCASE AREA 5730 X 6860 MM +600

UP +600

OPEN KITCHEN 2950 X 3750 MM +600

built in fridge

SUNKEN SLAB @250

BEDROOM 02 3650 X 4250 MM +600

oven microwave

+500

DINING ROOM 6890 X 3650 MM +600

tall boy storage

+600

WALK IN WARDROBE 2675 X 2045 MM +600

JUNIOR MASTER BEDROOM 7550 X 6050 MM +600

JUNIOR MASTER BATH 1720 X 4320 MM +600

DECK

WET KITCHEN 4580 X 6200 MM +600 SUNKEN SLAB @250

MASTER BEDROOM 6500 X 4300 MM +600

COURTYARD 6900 X 3230 MM +450

stub wall

SUNKEN SLAB @250

OPEN TO SKY

MASTER BATH 2600 X 4050 MM +600 SUNKEN SLAB @250

civil niche

UTILITY 3890 X 1300 MM +300

stub wall

civil seat

DECK 6200 X 1730 MM +600

COURTYARD +450 OPEN TO SKY COURTYARD +450 OPEN TO SKY

NOTE THIS DRAWING IS IN THE METRIC SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN NO. DATE

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : K FARM HOUSE

ARCHITECTURE

PROJECT CODE : KF

CollectiveProject

INTERIORS

DRAWING TITLE : KF-LA-R4-01

STRUCTURE

DRAWING NAME : INTERIOR LAYOUT - GROUND FL

ELECTRICAL

REVISION NO.: R4

PLUMBING

START DATE.: 2018-12-22

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:2019.03.01 N

CHKD : D/A

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

TERRACE +3550

TERRACE DECK 16480 X 4200 MM +3850

TERRACE DECK 6750 X 1400 MM +3850 TERRACE +4700

OPEN TO BELOW

SKYLIGHT OPEN TO BELOW

1265 X 6900 MM +3850

BALCONY 2570 X 6900 MM +3850

PLANTER +3100 LOUNGE 5700 X 3190 MM +3850

STUDY 4590 X 3950 MM +3850

TERRACE 5600 X 7200 MM +3850 PLANTER +3100

OPEN TO BELOW

POWDER ROOM 2250 X 1170 MM +3850

NOTE THIS DRAWING IS IN THE METRIC SYSTEM. ALL DIMENSIONS ARE TO BE READ AND NOT MEASURED. THIS DRAWING SHOULD NOT BE SCALED. ANY DISCREPANCIES TO BE BROUGHT TO THE DESIGNERS' NOTICE IMMEDIATELY.

REVISION COLUMN DATE NO.

DESCRIPTION

NOTES/LEGEND

CONSULTANT TEAM

PROJECT TITLE : K FARM HOUSE

ARCHITECTURE

PROJECT CODE : KF

CollectiveProject

INTERIORS

DRAWING TITLE : KF-LA-R4-01

STRUCTURE

DRAWING NAME : INTERIOR LAYOUT - FIRST FL

ELECTRICAL

REVISION NO.: R4

PLUMBING

START DATE.: 2018-12-22

MECHANICAL

SCALE : NTS

SECURITY

DRAWN :

REVISION DATE:2019.03.01 N

CHKD : D/A

NO.22 EAST AVENUE | KESAVAPERUMAL PURAM | OFF GREENWAYS ROAD R A PURAM | CHENNAI 600028 | +91- 44-24950514 CONTACT@1405DESIGNSTUDIO.COM WWW.1405DESIGNSTUDIO.COM

1" 43'-52

Sump

EB ROOM 3'6" X 4'

TOILET 7'6" x 4'6"

KITCHEN 7'6" x 6'0"

LIVING ROOM 10'6" x 10'10"

DRIVER'S TOILET 3'6" X 6'6"

BEDROOM 9'1" x 10'10"

1" 49'-42

1" 49'-02

ENTRANCE LOBBY 12'10" X 10'5"

DUCT 4'6"X 4'0"

LIFT 4'7" x 3'8"

2' wide Wall niche at 5' to accomodate DB box.

CAR PARK AREA 640 SQ.FT

PLANTER BOX 5' X 6'1"

GATE

43'-8"

1" 43'-52

WASH AREA 8'X 2' 10"

KITCHEN 13' 9" X 10' 10"

DINING ROOM 18' X 11'

POOJA Tall boy 2' X 3' unit

wood and glass partition

FORMAL LIVING ROOM 16' X 11'

FOYER 9'2" X 11'6"

1" 49'-02

LIFT

TOILET 5' X 7'

GUEST BEDROOM 1 13' X 13'

GUEST BEDROOM 2 12' 5"X 13'

TOILET 5' X 7'

43'-8"

1" 50'-02

ENTRANCE FOYER 3'6" X 11'

1" 43'-52

WINDOW AREA WITH SEATING

BUILT-IN FRIDGE

TOILET 5' X 7' HOME THEATER 13'4" X 10'10" BEDROOM 2 13' 7"X 10'10"

POWDER ROOM 5' X 5'6"

SWING

LIFT

TV AREA 12'11" X 7'8"

MASTER BEDROOM 13' X 13'

DRESSER AREA WITH MIRROR

WALK-IN-WARDROBE 12'11" X 3'7"

43'-8"

TOILET 5'6" X 13'

1" 50'-02

1" 49'-02

INFORMAL LIVING 26' X 11'

1" 43'-52

POWDER ROOM 5'9" X 4'

BAR AREA 12'4" X 10'10" Mini fridge

LOUNGE AREA 9'7" X 10'10" COVERED AREA

1" 50'-02

1" 49'-02

LIFT

TERRACE AREA 705 SQ.FT

WATER TANK

43'-8"