Cataloog waterco 2014[smallpdf com]

www.waterco.eu

Manufacturing Power House Waterco’s R&D division has led to the development of innovative products, meeting the challenges of change in the market place. The key to Waterco’s success has been its pioneering fibreglass and plastic moulding techniques, as well as its efficient manufacturing processes.

2

Waterco exports to over 40 countries via branches operating in Australia, New Zealand, Malaysia, China, the United Kingdom, France, United States of America, Canada and Indonesia as well as through international distributors.

Waterco France 3 Rue Paul Rieupeyroux, 69800 SAINT PRIEST, France.

Phone:+33 (0)4 72 79 33 30 Fax:+33 (0)4 72 79 33 39 Email: info.watercofrance@waterco.com

Waterco Europe Limited Radfield, London Road, Teynham, Sittingbourne, Kent ME9 9PS, United Kingdom.

Tel: 44 (0) 1795 521 733 Fax: 44 (0) 1795 522 085 Email: info@waterco.eu www.waterco.eu Effective 1st January 2014

3

Waterco Order Form Fax hotline: +44 (0) 1795 522085 email hotline: info@waterco.eu Company name: Delivery address (if different to account address):

Post Code:

Contact: Tel / Fax / Mobile: Date: Account No: Purchase Order No: Date required:

Carriage: Collection:

Special Delivery Instructions:

Qty

Product Code

Description

4

S av e t i m e , wat e r a n d e n e r g y Waterco’s Enviropro range of pool equipment not only maximises your time in the pool, but also delivers significant water and energy savings

Hydrostorm ECO pump

BriteStream Multicoloured LED lights

Hydroxypure Chlorine Free Pool Sanitation

Britestream Multicoloured LED lights can produce a multitude of different colours without the need for a coloured lens.

Its energy efficient super bright LEDs operate on only 15% of the electrical power of a halogen light.

A chlorine free swimming pool that is free from odours and taste, soft and gentle on the skin. Great news for swimmers with allergies and asthema.

MultiCyclone pre-filters

Opal XL cartridge filters

Micron ECO S602 media filter

MultiCyclone is a new prefiltration device that can help you save water and reduce filter maintenance. Based on the principals of centrifugal water filtration, MultiCyclone collects 80% of the dirt before it reaches the pool filter and it only requires 15 litres of water to flush.

Opal XL cartridge filters house an over sized filter cartridge, maximising its dirt holding capacity and minimising filter maintenance, leading to significant water savings.

Combined with a Multicyclone, Opal XL cartridge filters may only require a seasonal clean.

Micron S602 media filter features an innovative, internal distribution system, which provides effective coverage of the filter bed and enables improved hydraulic efficiency and backwashing, leading to significant water savings of up to 30% compared to conventional media filters.

MultiCyclone Plus filter

Zane Solar Gulfpanels

Electroheat heat pumps

MultiCyclone Plus combines centrifugal and cartridge filtration into one streamline housing, creating an ultra compact filtration system that can be vertically installed on a pool pump. Multicyclone Plus not only saves water but also minimises the foot print of your pool’s filtration system.

Zane Solar Gulfpanels effectively absorb the sun’s heat and transfers it to your swimming pool. Gulfpanels offer outstanding heat transfer properties with exceptional durability. Zane Solar pays for itself in just a few years. After the initial setup cost, the heat is provided free from the sun.

The latest advancement in swimming pool heating, Electroheat heat pump extracts latent heat from the surrounding air, intensifies it and transfers it to your swimming pool. Electroheat heat pumps are an energy efficient way to heat your pool and extend your swimming season.

Hydrostorm ECO pump saves electricity because it can be operated at different speeds and is equipped with an energy efficient permanent magnet motor. Each speed is designed for different functions – low speed for filtering, medium for water features and high for spa jets.

5

Index Supatuf Pump Turboflo Pump Hydrostorm Eco pump Hydrostorm Pump Hydrostorm Plus Pump Hydrotuf Pump Hydrostar Pump

Product Catalogue 8

Terms & Conditions of Sale

9

Conversion Tables

12-15

Waterco Valves Compact Ball Valves Flow Check Non Return Valves Push/Pull Valves Fulflo Valves FPI Valves Actuator Valves

16-17

MPV table and MPVs

20-37

General Pool Equipment - Filters MultiCyclone filters Trimline Cartridge Filter Opal Cartridge Filter Fulflo Tri-Cartridge Filter Fulflo D.E. Filter Exotuf thermoplastic filters Micron Side Mount Filter Micron Top Mount Filter Micron Top Mount Deep Bed Filter Sureflow TMV Top Mount Filter Lacron Bobbin Wound Filter Sureflow LSR Side Mount Filter Lacron Plus Filter Monobloc Systems Moulded Skid Base

40-55

Commercial Pool Equipment – Filters Micron SMD Sand Filters Micron SMDD Sand Filters Micron SPDD Nozzle Plate Filters Micron Horizontal Filter Hydron Split tank filter Sureflow HZC Filter Lacron sureflow LSC Finaflow MBF Medium Bed Filter Finaflow DBF Deep Bed Filter Finaflow HPF High Pressure Deep Bed Filter Hi Flow LCX Filter Hi Flow LCP Filter Valve Battery sets Strainers, Pipe & fittings

58-59

Filter Media Waterco Glass Media Zeoplus Media Waterco Glass Pearls

62-73

General Pool Equipment – Pumps Aquamite Pump Lacronite Pump Lacronite Eco pumps Supastream Pump

74-75

Commercial Pool Equipment – Pumps Hydrostar Pump Stainless Steel Pump Cast Iron Pump

78-83

General Pool Equipment - Pool Water recirculation Pool Returns Skimmers Main Drains Water Leveller Flush Deck Grating

86-90

Lights Britestream Underwater Niche LED Lights Britestream Underwater LED Lights Litestream Underwater Lights

93-95

Sanitization Salt Chlorinators Hydroxypure Chlorine free system

98

Cleaning Accessories Brooms, Leaf Skimmers/Rake

100-112 Pool Heating Heat Pumps Solar Heating Electric Heating 114-120 Spa Equipment & Accessories Top Load Niche Filter Spa Light & Blowers Spa Suction & Fittings Air Buttons & Micro Jets Jet Faceplates Speciality PVC Adaptors & Caps Spa Jets Air Switch Controls Jet bodies and inserts Spa Fittings 122-126 Aquaculture Products Bead Filter systems MultiCyclone Pumps Filtron Vortex Chambers Blowers Electric Heaters 128-138 Purification Systems Point of Use Point of Entry

6

Index DBF – 42 DBK – 24 DBK – 30 DBK – 42 DBK – 48 HPF – 18 HPF – 24 HPF – 30 HPF – 42 HZC – 36 HZC – 42 LC/LCX/LCP – 1200 LC/LCX/LCP – 1400 LC/LCX/LCP – 1600 LC/LCX/LCP – 1850 LCX/LCP - 2000 LCX/LCP - 2350 Hydron Split Tank

Spare Parts Catalogue 2-19

Pumps Aquamite Aquastream Supastream Supatuf Hydrotuf Lacronite Hydrostorm Hydrostorm Plus Hydrostar 350 Hydrostar Commercial MK2 Hydrostar Commercial MK3 Stainless Steel Pump Cast Iron Pump

20-31

Filters Top Mount Filter Side Mount Filter SMDD Side Mount Deep Bed Filter Hydron Commercial Filter Trimline Cartridge Filter Fulflo Cartridge Filter Top Load Cartridge Filter Opal XL filter Astra Fulflo D.E. Filter

32-37

38-84

General Equipment M.P.V. Table 6 Way MPV 1½” / 50mm 6 Way MPV 2” / 63mm 4 Way MPV 1½” / 50mm MPV 2½” / 75mm SM AND TM MPV 3” / 90mm SM and TM

84-95

General Equipment Electrochlor 25A, 30A Waterking Inline Feeder Waterco S75 Skimmer Box Waterco Supaskimmer/fulflo Waterco SP5000 Skimmer Box Waterco Main Drain Auto Poolwater Leveller Whisper Air / Airflo Blowers Underwater Pool Light Underwater Spa Light

96-99

Heat Pumps Electroheat Heat Pump Electroheat Plus Heat Pump

100-104 General Equipment 2 and 3 Way Valves A10 Valve Domestic Brine Valve Commandomatic Trimline Filter W & WD Series Deep Bed Filter

Lacron Filters MultiCyclone Multicyclone Plus / Ultra 12 Multicyclone Plus / Ultra 16 TMV - 18 TMV - 20 TMV - 24 LSR - 16 LSR - 18 LSR - 20 LSR - 24 LSR - 30 Lacron Plus Top Mount 20 Lacron Plus Top Mount 24 Lacron Plus 20 Lacron Plus 24 Lacron Plus 30 LSC - 36 - 2” LSC - 36 - 3” LSC - 42 LSC - 48 DBF - 18 DBF– 24 DBF - 30 DBF - 36

7

Terms and Conditions of Sale 1. PURCHASES

We request that orders be made in writing using product code numbers and descriptions as published in our price list. This will minimise the possibilities of errors.

2. DELIVERY

Delivery time will be 14 days from receipt of orders in the case of material available ex-stock. Where items are out of stock, we will specify supply date immediately upon receipt of order. Supply date is the date material leaves our warehouse as we cannot be held responsible for changes in shipping schedules or shipping delays.

3. PAYMENT

Irrevocable Letter of Credit, with partial shipment allowed or payment in advance by telegraphic transfer unless credit arrangements have been approved. Orders below €5,000.00 (ex-Sydney, Australia or ex-Kuala Lumpur, Malaysia) will be accepted only on a prepayment basis unless credit arrangements have been approved.

4. MINIMUM ORDER

There is a minimum order of €5,000.00 for sales from either Waterco Limited (ex-Sydney, Australia) or sales from Waterco (Far East) Sdn. Bhd. (ex-Kuala Lumpur, Malaysia). Handling charge of €215.00 applies for orders below €5,000.00 however, this minimum order amount will not apply to sample orders, or depending on agreement, for a distributor start-up situation. Minimum order value from Waterco Europe is €50 (excluding taxes and freight) or a surcharge of €25 will apply.

5. PRICES

Prices are inclusive of standard packing ex-warehouse and in €. Waterco Europe Ltd reserves the right to change the price without prior notice.

6. WARRANTY

All Waterco Europe Ltd products are manufactured using the finest quality materials available and are subjected to the most stringent quality and performance tests. Our products are warranted from date of purchase, as follows:- (for residential pools)

Labour 1 year warranty on all products

3 years pump housing. 2 years motor and pump components and 1 year Pumps mechanical seal. For sea water/aquarium applications, 6 months if the pump is

fitted with a silicone carbide mechanical salt water seal.

Domestic Filters

Micron (Tank Only) 10 years

Components 1 year

Thermoplastic Filter (Tank Only) 10 years (5 years full + 5 years pro rata warranty)

Components 1 year

Trimline Cartridge Filter (Tank Only) 10 years

DE Filters 5 years (3 + 2 conditional tank warranty)

Components 1 year

Accessories 1 year, excluding light bulbs Commercial Filament Wound Filters 10 years (5 years full, 5 years pro rata warranty) Lacron Sand Filters 5 years (1 year full + 4 years pro rata warranty) Heat Pumps 10 years Heat Exchanger, 3 years compressor, 1 year all other parts This warranty does not cover any failure in service caused by improper installation, or improper operation as a result of noncompliance with the maintenance and installation manual. Nor is any failure as a result of fire, wreckage, freezing, willful abuse, improper repackaging or damage incurred in transportation. Warranty will also not cover consequential damage resulting from any failure in service. Faulty parts will be replaced free of charge, after inspection by our Quality Control Department.

7. ORDERS

The customer shall, within fourteen (14) days upon receipt of a completed order, report to Waterco Europe Ltd in writing, all incorrect deliveries. Deliveries shall be assumed to be correct and no adjustment shall be made unless such notice is provided to Waterco Europe Ltd within fourteen (14) days of the date of receipt of the goods.

8. OWNERSHIP OF GOODS

Ownership of the goods in all cases shall be retained by Waterco Europe Ltd until payment is made for such goods and for all goods supplied by Waterco Europe Ltd to the customer and such payment is received in full. In the event that the customer fails to make payment within the due time stipulated by Waterco Europe Ltd, Waterco Europe Ltd shall have the right to enter upon the premises of the customer and to regain possession of the said goods. In the event that such goods are sold by the customer prior to payment thereof, or if they shall become constituents of other goods, then the proceeds of sale thereof shall be the property of Waterco Europe Ltd. 9. DISPUTES

Any dispute must be received in writing by Waterco Europe Ltd within 14 days of receipt of goods.

8

Conversion Tables some useful conversions Kilowatts Kg H.P. Inches Feet Sq. Ft.

x 3412 x 2.205 x 0.7457 x 2.540 x 0.3048 x 0.0929

Imperial Gallon

US Gallons

= = = = = =

= 1.201 = 0.004546 = 4.546 = 0.833 = 0.003785 = 3.785

Ft2 Ft3 m3 imp Gallons Ft3 m3

B.T.U. Pounds Kilowatts Centimetres Metres Sq. Metres

x 0.0283 x 6.2288 x 220 x 4.5461 x 28.317 x 1000

1m3

1 Litre

US Gallons m3 litres Imperial Gallons m3 litres

= 220 = 264.20 = 1,000 = 0.2200 = 0.2640 = 0.0010

= = = = = =

m3 Gallons (imperial) Gallons (imperial) Litres Litres Litres

Imperial Gallons US Gallons litres Imperial Gallons US Gallons m3

UPVC & abs imperial pipe - dimensions and flow rates pipe size

pipe class

inches 0.5” 0.75” 1” 1.25” 1.5” 2” 3” 4”

E E E E C C E E

outside diameter

internal diameter

inches

inches

0.842 1.053 1.321 1.663 1.900 2.375 3.500 4.500

0.692 0.888 1.102 1.409 1.609 2.137 3.012 3.846

cross section suction flowrate return flowrate area max flow at 1.2m/ max flow at 2.0m/ sec velocity sec velocity gal/hour m3/hour square inches gal/hour m3/hour 0.376 0.619 0.954 1.559 2.032 3.586 7.124 11.615

232 381 587 959 1250 2206 4382 7145

1.1 1.7 2.7 4.4 5.7 10.0 19.9 32.5

386 634 978 1598 2084 3677 7305 11910

1.5 2.4 3.7 6.0 7.8 13.9 27.6 45.0

head and pressure 1ft Head

= 0.3048 = 0.4335 = 0.02989 = 0.8827 = 0.03048

metres head psi bar inch/hg vacuum kgf/cm2

1metre Head

= 3.281ft = 1.422 = 0.09807 = 2.896 = 0.1000

ft Head psi bar inch/hg vacuum kgf/cm2

equivalent metric imperial Outside Dia. Outside Dia. Nominal Outside Dia. (Imperial) Bore (Imperial) 20mm 0.67” 3/8” 0.675” None – 1/2” 0.842” 25mm 0.98” 3/4” 1.053” 32mm 1.26” 1” 1.321” 40mm 1.58” 11/4” 1.663” 50mm 1.97” 11/2” 1.900” 63mm 2.48” 2” 2.375” 75mm 2.95” 21/2” 2.960” 90mm 3.54” 3” 3.500” 110mm 4.33” 4” 4.500” 125mm 4.92” none – 140mm 5.51” 5” 5.520” 160mm 6.30” 6” 6.625”

IMPORTANT NOTE: When refering to pipe sizes, metric pipe is quoted by its actual outside diameter. Imperial pipe is quoted by its nominal bore or inside diameter.

9

Contents VALVES

FILTERS

COMMERCIAL FILTERS

MEDIA

Pumps

Pool Water Recirculation

Lights

sanitization

Cleaning accessories

Heating

Spa Equipment

AquaCULTURE

Water Treatment 10 Table Of Contents

www.waterco.eu

Valves 11

www.waterco.eu

Waterco Valves

Waterco Valves COMPACT BALL VALVE Part˙ No. Product Description 14020 Socket 14025 Socket 14040 Socket 14050 Socket

Nom. Size ¾” 1” 1½ 2”

Price € 13.63 € 17.87 € 27.27 € 38.32

PUSH/PULL VALVES Part No. Product Description A68487 Push/Pull Valve A68488 Push/Pull Valve

Nom. Size 1½” 2”

Price € 35.11 € 56.17

FULFLO VALVES - with Teflon seals, 4 Bar Part No. Product Description 14842 Fulflo 2 Way Valve 14843 Fulflo 3 Way Valve 148423 Fulflo 2 Way Valve Metric 148433 Fulflo 3 Way Valve Metric

Nom. Size 1½” 1½” 50mm 50mm

Price € 33.63 € 35.19 € 33.63 € 35.19

The Fulflo two way and three way valves feature a Teflon™ encapsulated seal that offers reliable sealing and smooth operation without the need for lubrication.

The Fulflo valve body is manufactured with strong and durable PVC and is compatible with all PVC pipe that will ensure a quick setting and strong sealing bond. The Fulflo’s handle, locking ring, lid & diverter are constructed from filled Polypropylene for improved durability.

12

Waterco Valves FLOW CHECK NON RETURN VALVE Part No. Product Description 14653 Flow Check Valve 180° 14651 Flow Check Valve 180° 146539 Flow Check Valve 90° 146519 Flow Check Valve 90°

Flow Check Valve 180º

Nom. Size 63/75mm 2”/2½” 63/75mm 2”/2½”

Price € 43.11 € 43.11 € 42.97 € 42.97

The Flow Check Valve has been designed to be simple to install, inspect and service. With a stainless steel spring designed for minimal hydraulic losses and a stronger positive seal, it is ideal for both inlet and return lines.

Stainless steel fasteners (316 grade) Clear polycarbonate lid for simple inspection

Stainless steel spring designed for minimal hydraulic losses and a strong positive seal

UV stabilised PVC body EPDM flapper gasket

Flow Check Valve 90º

The Check Valve’s pressure rating of 4 BAR (58 psi) and its 316 stainless steel fasteners make it suitable for domestic and commercial applications.

• Eliminate the loss of prime on the suction side of a pump.

2½" Flow Check Valve Pressure Drop

20

90º 2-way

16 14 12

180º 2-way

10 8 6 4 2 0

0

6

12

18

24

30

36

42

Flow (m³/hr)

40/50mm Flow Check Valve Pressure Drop

3.5 3.0

Pressure Drop (kPa)

• Prevent water flow in an unwanted direction.

Pressure Drop (kPa)

18

• Prevent the drain down of water towards pumps and filters.

90º 2-way

2.5 2.0 1.5 1.0

Straight 2-way valve

0.5 0.0

0

50

100

150

200

250

Flow (m³/hr)

13

300

350

400

450

Waterco Valves FPI VALVES - with teflon seals Part No. Product Description 14852 2 Way Valve slip fit - teflon impregnated seals 14853 3 Way Valve slip fit - teflon impregnated seals 148523 2 Way Valve slip fit - teflon impregnated seals 148533 3 Way Valve slip fit - teflon impregnated seals 14856 2 Way Valve slip fit - teflon impregnated seals 14860 3 Way Valve 360° slip fit - teflon impregnated seals 148563 2 Way Valve slip fit - teflon impregnated seals 148603 3 Way Valve 360° slip fit Metric- teflon impregnated seals

Nom. Size 1½”/2” 1½”/2” 50mm 50mm 2”/2½” 2”/2½” 63/75mm 63/75mm

Price € 39.77 € 32.06 € 30.49 € 32.06 € 41.46 € 43.03 € 41.46 € 43.03

Teflon impregnated seal Strong PVC body for maximum durability Large “Easy Turn” handle Stainless Steel Hardware

4 Bar Rated

Teflon seals Teflon™ seals offer minimal friction and smooth operation.

Quick installation The FPI valve body is made from UPVC. Its compatibility with PVC pipes will ensure quick setting and a stronger bond.

Engineered strength Both the FPI Valve lid and handle are constructed from premium ABS plastic. The valve’s steel components are constructed from high quality 316 grade stainless steel.

High pressure rating The advanced design and construction of the FPI valves enable them to withstand a working pressure of 4 BAR (58 psi).

14

Waterco Valves FPI VALVES ACTUATOR Part No. Product Description 3652607 24VAC FPI Valve Actuator

Price € 272.10

• Designed to operate 2-way and 3-way FPI valves • Adjustable cam rotates diverter valves to multiple degree settings • Provides automatic control of valves for water features, pool/spa combinations, solar collectors and pool cleaners • Retro-fits into all pool/spa control systems offered in the market Specifications Voltage Amps Torque Material Grease Cord length Rated

24 VAC 0.65 250 inch pounds (288 kilograms force centimeter) Housing - Noryl: Gears - steel MoS2 Lubricant 15’ (457.2 cm) Outdoor use

182mm 161mm

122mm 94mm

Actuator FPI Valves Part No. Product Description 148584 3 Way Valve Slip fit-teflon impregnated seal 2”/2½” 148564 2 Way Valve Slip fit-teflon impregnated seal 2”/2½”

15

115mm 67mm

Price € 50.44 € 48.05

Waterco Valves MULTIPORT VALVE TABLE Part Number Product Description: MPV TYPE TOP MOUNT MPVs All valves come complete with quick connect unions, pressure gauge and air-relief valve 2280441EUM

50mm c/w unions

228053EURO 2280600 228800 2280443EUM 2280445EUM 2280424 22804455EUM

2”/ 63mm male threaded port (W) 2½” / 75mm MPV slip fit 3” MPV 1½” Collar Type 1½”/50mm Clamp type Valve 1½”/50mm Clamp type Valve 1½”/50mm Clamp type Valve

S500-700; F400-700; T400-600 - Lacron Plus TM 20”-24” S702-S1200; F702 S1050 - S1200 S1200 - S1400 S700, S600 Premium S600/T600 (old style) T400/T450/T500 T600 Exotuf (new style)

2290501 22905040

SIDE MOUNT MPVs 50mm ( 1½”) MPV BSP 4 language (Suits sweep elbow - 21558) 2” MPV -black (30” only suits sweep elbow 1215590) 2” MPV -White (30” only suits sweep elbow 1215590) 3”/90mm Side Mount MPV only 1½” / 50mm MPV 4 language - Metric & Imperial fittings (suits sweep elbow 121558) 2”/63mm MPV only 2”/ 1½” / 75mm MPV only BSP (suits sweep elbow -121559) 2”/63mm 6 way MPV only Slip Fit 2 ½”/75mm 6 way MPV only

2290900

3”/90mm MPV only (Waterco)

2290905 2290491EURO 2290501

3”/90mm MPV c/w p/kit (Waterco) 1½” MK2 c/w p/kits 2” port with 63mm fittings 2 ½”/75mm Slip Fit

2291100

4” w/o p/kits

2291105

4” c/w p/kit

2290422 4103 4104 2290900 2290422 2290512EURO 2290512

SUITS FILTER MODEL

LSR 16” - 18” - 20” - 24” Lacron Plus 20” - 24” LSC 30”- 36 - 2” LSC 30”- 36 - 2” LSC 36”- 3” - LSC 42” SM400 - SM500 SM700 - SM900 - Lacron LSR Plus 30” SM700 - SM900 SM1050 - SM1200 SM1050 - SM1200 SMD900 - 1600; SMDD900 - 1600 SMD900 - 1600; SM600 with 2” port SM1050 - SM1200 SMDD1600 - 2000 (4” ports) SMD1600-2000 SMD1600-SMD2000

4 Bar Rated Metric or imperial quick connect unions.

Heavy duty ABS construction.

High grade stainless steel components.

6 way multiport valve positions.

Durable lever action handle.

Pressure gauge.

Wear resistant rotor.

Clear sight glass for backwash inspection.

Clear filled thermoplastic for maximum strength.

Waterco Multiport Valves

Constructed from heavy duty ABS and GFPP, Waterco Multiport valves are designed for maximum performance and working pressures. Waterco’s entire range of Multiport valves are engineered to withstand a working pressure of up to 4 bar (58 psi) with a test pressure of 6 bar (87 psi).

16

Waterco Valves WATERCO DOMESTIC MULTIPORT VALVES Part No. Product Description All valves are complete with quick connect unions, pressure gauge & air relief valve Top Mount MPV 2280441EUM Top Mount 6 way valve c/w quick connect unions 2280443EUM Top Mount 6 way Collar Type (old style Thermoplastic) 2280445EUM Top Mount 6 way Clamp Style (T600) 22804455EUM Top Mount 6 way Clamp Style (Exotuf 600) 2280424 Top Mount 6 way Clamp Type Valve (T400,T450, T500) 228053EURO Top Mount 6 way valve c/w quick connect unions

2290491EURO

2290422 2290512EURO

121558 121559

Side Mount MPV with kits SM MPV MkII c/w plumbing kit 1½” port Side Mount MPV only SM MPV only (suits sweep elbow) c/w 1½ imperial & 50mm metric quick connect unions SM MPV only (suits sweep elbow) c/w 2” imperial & 63mm metric quick connect unions Sweep Elbow Kits 1½” Waterco Sweep Elbow Kits with o-ring 2” Waterco Sweep Elbow Kits with o-ring

WATERCO COMMERCIAL 4 Bar 6 WAY MULTIPORT VALVES Part No. Product Description All valves come complete with quick connect unions, pressure gauge & air relief valve.

Side Mount 2290501 2½”/75mm Side Mount MPV only 22905040 2½”/75mm Side Mount MPV c/w plumbing kit 2290900 3”/90mm Side Mount MPV only 2290905 3”/90mm Side Mount MPV c/w plumbing kit 2291100 4”/110mm Side Mount MPV only 2291105 4”/110mm Side Mount MPV c/w pluming kit

2280600 228800

Top Mount 2½”/75mm Top Mount MPV only 3”/90mm Top Mount MPV only

FILTER TANK TO MPV PLUMBING KITS Part No. Product Description Old Style Lacron LSR Filters (pre 2004) 17070 16” tank - 1½” Plumbing kit Sweep Elbow with gasket 1215580 18/24” tank - 1½” Plumbing kit Sweep Elbow with gasket

121558 1215590

New Style - Lacron LSR WFE Filters (post 2004) 16/18/20/24” tanks Plumbing kit with o-ring 30” tank Plumbing kit with gasket

Nom. Size

Price

1½”/50mm 1½”/50mm 1½”/50mm 1½”/50mm 1½”/50mm 2”/63mm

€ 166.75 € 194.35 € 183.84 € 183.84 € 183.84 € 228.19

1½”/50mm

€ 166.75

1½”/50mm

€ 133.40

2”/63mm

€ 184.31

1½” 2”

€ 24.08 € 29.54

Nom. Size

Price

2½”/75mm 2½”/75mm 3”/90mm 3”/90mm 4”/110mm 4”/110mm

€ 289.27 € 373.64 € 548.41 € 705.10 € 1,074.99 € 1,108.78

2½”/75mm 3”/90mm

€ 295.30 € 578.55

Price € 26.52 € 38.57

€ 24.11 € 43.09

PLEASE NOTE: 1.1/2” Lacron filters manufactured pre 2004 will have union adaptors (Barrel Unions) with flat gaskets. 1.1/2” Lacron filters manufactured post 2004 will have union adaptors (Barrel Unions) with ‘O’ rings

17

Waterco Filters

www.waterco.eu

Filters www.waterco.eu

Waterco Filters

General Filters

CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200383 MultiCyclone Ultra MC16 (75) c/w Cartridge 200382 MultiCyclone Ultra MC12 (75) c/w Cartridge For base stands please see page 23

Nom. Size 2” / 63mm 11/2” / 50mm

Price € 726.65 € 615.26

Imperial / Metric quick fit unions Pressure gauge Hydraulically efficient design MC12 (75)

Glass filled thermoplastic 75ft2 pleated filter cartridge 12 / 16 hydrocyclones Clear poly carbonate sediment chamber 1” / 32mm purge valve

MultiCyclone 12 Ultra

MultiCyclone 16 Ultra

337mm / 13.3"

944mm / 37.2"

337mm / 13.3"

977mm / 38.5"

MC16 (75)

S av e t i m e , wat e r a n d e n e r g y.

271mm / 10.7"

271mm / 10.7"

Specifications

The Multicyclone Ultra has all the benefits of the ever popular Multicyclone with the addition of a 75ft2 cartridge filter located in the upper housing. Incoming water enters the hydrocylones tangentially, generating a strong centrifugal effect. The sediment particles are then spun out to the hydrocyclone’s wall, and spiral down into the sediment chamber.

The filtered water then migrates towards the centre of the hydro cyclone where the water reverses and spirals upwards and through a 75ft2 cartridge element before exiting the Multicyclone Plus. The addition of the cartridge element provides the highest standard of filtration possible with very little need for cleaning. The majority of the sediment is removed by the hydrocyclones. The sediment level can be visually monitored through the Multicyclones clear sediment bowl.

The pressure gauge located at the top of the unit indicates when the cartridge requires cleaning. The cartridge can easily be removed by undoing the locking ring.

418

Hydrocyclones

Connection Ports

Minimum Flow

Maximum Flow

Filter Area

Maximum Pool Size

MultiCyclone12 Ultra

12

1½” / 50mm

2.4m3/h

13.5m3/h

75ft2 / 6.5 m²

100m3

MultiCyclone16 Ultra

16

2” / 63mm

3m3/h

16.8m3/h

75ft2 / 6.5 m²

100m3

Model

20

Maximum Pressure 3.5 BAR 350 kPa (50psi) 3.5 BAR 350 kPa (50psi)

General Filters PLUS CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200381 MultiCyclone Plus MC16(40) c/w Cartridge 200380 MultiCyclone Plus MC12(40) c/w Cartridge For base stands please see page 23

Nom. Size 2” / 63mm 11/2” / 50mm

Price € 666.50 € 551.78

Imperial / Metric quick fit unions Pressure gauge MC12 (40)

40ft2 pleated filter cartridge Glass filled thermoplastic Hydraulically efficient design 12 / 16 hydrocyclones Clear poly carbonate sediment chamber 1” / 32mm purge valve

MultiCyclone 12 Plus

MultiCyclone 16 Plus

337mm / 13.3"

337mm / 13.3"

769mm / 30.3"

MC16 (40)

S av e t i m e , wat e r a n d e n e r g y.

803mm / 31.6"

271mm / 10.7"

271mm / 10.7"

Specifications

The Multicyclone Plus has all the benefits of the ever popular Multicyclone with the addition of a 40ft2 cartridge filter located in the upper housing. Incoming water enters the hydrocylones tangentially, generating a strong centrifugal effect.

The sediment particles are then spun out to the hydrocyclone’s wall, and spiral down into the sediment chamber. The filtered water then migrates towards the centre of the hydrocyclone where the water reverses and spirals upwards and through a 40ft2 cartridge element before exiting the Multicyclone Plus. The addition of the cartridge element provides the highest standard of filtration possible with very little need for cleaning. The majority of the sediment is removed by the hydrocyclones. The sediment level can be visually monitored through the Multicyclones clear sediment bowl.

The pressure gauge located at the top of the unit indicates when the cartridge requires cleaning. The cartridge can easily be removed by undoing the locking ring.

418

Hydrocyclones

Connection Ports

Minimum Flow

Maximum Flow

Filter Area

Maximum Pool Size

MultiCyclone12 Plus

12

1½” / 50mm

2.4m3/h

9m3/h

40ft2 / 3.7m2

55m3

MultiCyclone16 Plus

16

2” / 63mm

3m3/h

13.5m3/h

40ft2 / 3.7m2

80m3

Model

21

Maximum Pressure 3.5 BAR 350 kPa (50psi) 3.5 BAR 350 kPa (50psi)

General Filters

CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200375 MultiCyclone MC16 200374 MultiCyclone MC12 For base stands please see page 23

Nom. Size 2” / 63mm 11/2” / 50mm

Price € 476.10 € 360.57

Quick fit unions

UV and corrosion proof

MC16

Hydraulically efficient design

Glass filled reinforced thermoplastic

Multiple hydro cyclones

Lock ring

Clear poly carbonate sediment bowl

32mm / 1” sediment purge valve

Incoming water enters hydro cyclones tangentially, generating a strong centrifugal effect.

The sediment is spun out to the hydro cyclone’s wall, and then spirals down to the sediment chamber. The filtered water migrates towards the centre of the hydro cyclone where the flow reverses and spirals upwards through the outlet.

Accumulation of sediment can be visibly monitored through the MultiCyclone’s clear sediment chamber.

The MultiCyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the MultiCyclone.

MultiCyclone is easy to install and fits to most existing filtration systems. There are no moving parts to wear out and replace and it’s backed by Waterco’s 2 year warranty.

MC12

S av e t i m e , wat e r a n d e n e r g y.

Specifications Hydrocyclones

Connection Ports

Minimum Flow

Maximum Flow

Maximum Pool Size

MultiCyclone12

12

1½” / 50mm

2.4m3/hr

18m3/hr

55m3

MultiCyclone16

16

2” / 63mm

3m3/hr

30m3/hr

80m3

Model

22

Maximum Pressure 350 kPa (50psi) 3.5 Bar 350 kPa (50psi) 3.5 Bar

General Filters

INDUSTRIAL CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200386 MultiCyclone Pro 7 Bar pre-filter

The MultiCyclone Pro has all the benefits of the standard MultiCyclone model with the added benefit of being able to withstand higher pressure, rated to 7 bar the MultiCyclone Pro is specifically designed for the more demanding industrial market.

S av e t i m e , wat e r a n d e n e r g y.

R 7 BA

Nom. Size 2” / 63mm

Price € 984.30

600mm / 23.6"

Manufactured using UV and corrosion resistant glass filled reinforced thermoplastic the MultiCyclone Pro offers all water saving benefits of our MultiCyclone technology together with the strength and durability necessary for a industrial installation.

270mm / 10.6"

294mm / 11.6"

Specifications Model MultiCyclone16 Pro

Connection Ports

Minimum Flow

Maximum Flow

2” / 63mm

3m3/hr

30m3/hr

WATERCO MULTICYCLONE BASE STANDS Part No. Product Description 200372 MultiCyclone Base MKII version 2003730 MultiCyclone Base - over pump version

MultiCyclone base stands stands are suitable for: MultiCyclone Base MKII version Dimensions: 400mm (H) x 400mm (W) x 350mm (D).

MultiCyclone 12 & 16 MultiCyclone Plus 12 & 16 MultiCyclone Ultra12 & 16

Over pump stand Dimensions: 795mm (H) x 440mm (W) x 350mm (D)

23

Maximum Pressure 690 kPa (100psi) 7 Bar

Price € 60.75 € 124.73

General Filters 70 XL COMMERCIAL COMMERCIAL CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200390 MultiCyclone 70 XL Commercial

Nom. Size 4”/110mm

Price € 2,403.12

The MultiCyclone Commercial is a new addition to the MultiCyclone range. Although very different in appearance to the previously released models, this unit still has all the water and energy saving benefits of the standard MultiCyclone model. Specifically designed for commercial installations, the MultiCyclone Commercial has 4 ” / 110mm ports and uses 70 cyclones allowing it to function with a flow rate of 90m³/hr.

The debris can be seen through the clear sight glass and flushed out of the purge valve.

Specifications A

Model

B

MultiCyclone 70 XL Commercial

Connection Ports

Minimum Flow

Maximum Flow

Maximum Pressure

4” /110mm

36m³/hr

90m³/hr

3.5Bar/50psi/350kPa

Dimensions (mm) C I

Model A B C D E F G H I MultiCyclone Commercial 710 mm 623.3 mm 542.5 mm 498.9 mm 400 mm 543.6 mm 498.9 mm 780.7 mm 1353.4 mm Pre-Filter

H D

F

E

MultiCyclone 70XL Head Loss Curve

G

16 14

Head Loss (m)

12 10 8 6 4 2 0 0

20

40

S av e t i m e , wat e r a n d e n e r g y.

24

60

Flow (m3/hr)

80

100

120

General Filters WATERCO TRIMLINE CARTRIDGE FILTERS - 3.5 Bar pressure rating Part No. Product Description Filter supplied with both 1½” Imperial and 50mm quick connect unions.

21450EU Trimline CC50 incl. cartridge 21475EU Trimline CC75 incl. cartridge 214100EU Trimline CC100 incl. cartridge

Model

Maximum Area

Dom. flow

CC50 CC75 CC100

m2 4.6 6.9 9.3

m3/hr 11.4 16.5 22.88

Trimline cartridge filters are compact, economical filters designed to effectively filter out suspended solids from your pool.

Nom. Size

Price

50 sq.ft 75 sq.ft 100 sq.ft

€ 273.43 € 341.79 € 425.30

Working Pressure

Max. Pool Size

Overall Weight

Bar psi 3.5 / 50 3.5 / 50 3.5 / 50

m3 60 90 120

kg 8.6 10.5 14.0

Air relief valve Easy to read pressure gauge Hand operated lid lock ring, allowing simple cartridge removal and replacement

Trimline cartridge filters utilise a specially treated synthetic fabric which is pleated into a cartridge. Cartridge filters are ideal for applications where backwashing may not be practical.

Inbuilt airbleed - eliminates air build up in tank High impact polypropylene body Pleated filter cartridge

250mm

1½” / 50mm half unions

7.8mm 197.7mm

Trimline Pleated Filter Cartridge The Trimline pleated filter cartridges are fabricated from pleated reusable polyester fabric. The media has been pleated to provide 4.6 to 9.3 square metres of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning.

Material : Polyester Fabric material, Vinyl Plastisol

end caps and a Polypropylene core

Model CC50 605mm CC75 720mm CC100 970mm

Operating Temperature : 4˚C to 50˚C Maximum Pressure Drop : 0.2 Bar / (3psi) Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose.

259.2mm 384.2mm

Warranty Waterco is proud to show its absolute confidence in its range of Trimline cartridge filters by offering a 10 (5+5) tank warranty and 1 year warranty on all other components, excluding cartridge.

Commercial applications attract a 1 year tank warranty.

S av e t i m e , wat e r a n d e n e r g y.

25

General Filters OPAL CARTRIDGE FILTER (10 year conditional warranty) 3.5 Bar pressure rating Part No. Product Description Nom. Size 2171350 Opal Cartridge Filter 135 135 sq.ft 2171800 Opal Cartridge Filter 180 180sq.ft

Price € 505.97 € 573.96

Air relief valve.

Easy to read pressure gauge.

Hand operated lid lock ring, allowing simple cartridge removal and replacement.

Solid one piece moulded polymer tank. Low profile for easy cartridge removal and inconspicuous enclosure.

Tough heavy duty polyester filter fabric with wide and deep pleats for better filter efficiency, easy cleaning and longer cartridge life.

Constructed from high impact polypropylene and designed for easy maintenance, Opal cartridge filters house a large filter cartridge to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings.

2”/63mm quick connect barrel unions for UPVC pipe.

Specifications Model Opal 135

Opal 180

Filter Area (m2) (ft2) 12.5

135

16.7

180

Max Flow Rate m3/hr 30

30

Working Pressure Bar psi 3.5

3.5

• Screw down lid, requires no clamps or tools for simple cartridge removal and replacement

Pleated Filter Cartridge The Opal Filter’s Cartridges are fabricated from pleated reusable polyester fabric. The media has been pleated to provide 12.5m2 to 16.7m2 of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning.

• 2” / 63mm inlet and outlet ports for maximum flow and minimum back pressure

Material : Polyester Fabric material, Vinyl Plastisol end caps and a Polypropylene core

• Heavy duty extra large pleated filter cartridge

Maximum Pressure Drop : 0.2 Bar

Max Pool Size m3

50

50

180

180

Operating Temperature : 4ºC to 50ºC / (3 psi)

Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose.

393mm / 15.5”

483mm / 19”

668mm / 26.3” 60mm / 2.4”

S av e t i m e , wat e r a n d e n e r g y.

26

General Filters OPAL XL CARTRIDGE FILTER (10 year conditional warranty) 3.5 Bar pressure rating Part No. Product Description Nom. Size 217225 Opal XL Cartridge Filter 225 225 sq.ft 217270 Opal XL Cartridge Filter 270 270 sq.ft

Price € 663.12 € 755.62

Specifications Filter Area

Model

Max Flow Rate

Working Pressure

Max Pool Size

(m2)

(ft2)

m³/h

Bar

psi

m³

Opal 225

20.9

225

30

3.5

50

180

Opal 270

25.1

270

30

3.5

50

180

Extra Large Filter Cartridge Opal XL filter cartridges are fabricated from pleated reusable polyester fabric. The XL larger size cartridge has been pleated to provide 225ft2 (20.9m2) to 270ft2 (25.1m2) of surface area maximising its dirt holding capacity and minimising filter maintenance.

Constructed from high impact polypropylene and designed for easy maintenance, Opal XL cartridge filters house an extra large filter cartridge to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings.

• Screw down lid, requires no clamps or tools for simple cartridge removal and replacement

Material : Polyester Fabric material, Plastisol

end caps and a Polypropylene core Operating Temperature

: 4˚C to 50˚C

Maximum Pressure Drop

: 0.2 Bar (3 psi)

Simple Maintenance The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose.

Dimensions (mm)

• 2” / 63mm inlet and outlet ports for maximum flow and minimum back pressure

Opal 270

• Heavy duty extra large pleated filter cartridge

Opal 225

369

369 480

1170 *

1280 * 942

812

S av e t i m e , wat e r a n d e n e r g y.

* Minimum Clearance Height to Remove Cartridge (mm)

27

General Filters WATERCO TRI CARTRIDGE FILTERS Part No. Product Description 2165300 Fulflo Tri-Cartridge Filter C300 2165400 Fulflo Tri-Cartridge Filter C400 2165500 Fulflo Tri-Cartridge Filter C500

Nom. Size 300 sq ft 400 sq ft 500 sq ft

Price € 962.15 € 1,120.20 € 1,278.26

Hand – release clamp for easy maintenance Air relief valve Pressure gauge Three pleated filter cartridges Non-corrosive, durable, polypropylene tank Split tank design for easy maintenance

50mm quick connect unions

Fulflo Tri-cartridge filter houses three individual pleated filter cartridges, to maximise its dirt holding capacity and minimise filter maintenance, leading to significant water savings.

Filter Cartridge At the heart of the Fulflo Tri Cartridge Filters are three individual filter cartridges, constructed from heavy duty, easy-to-clean polyester fabric. The cartridge pleats create a large surface area providing a high dirt holding capacity, thus decreasing its cleaning frequency.

Material

: Polyester Fabric material, Vinyl Plastisol end caps and a Polypropylene core : 4˚C to 50˚C

Operating Temperature Maximum Pressure Drop

: 0.2 Bar (3 psi)

Specifications Model No.

Filter Area Filter Area

Design Max. Pool FlowRate Size (m³/h) (m³)

Max. Working (Bar) (psi )

(sq.ft.)

(m2)

2165300

300

28

25

150

3.5

50

2165400

400

37

31

180

3.5

50

2165500

500

46

31

180

3.5

50

1220

Maintenance The Tri Cartridge Filter’s split tank design incorporates an easy to use clamp that requires no additional tools for simple cartridge removal and replacement, allowing for quick access to the filter cartridge without disturbing the piping and connections.

: 30 Microns (nominal)

Filter Rating

1174.8

Built to endure the rigours and pressures of the outdoor environment, Fulflo Tri Cartridge Filters are made from specially engineered polymers that have been tested for durability and strength.

Sturdy support base

S av e t i m e , wat e r a n d e n e r g y.

298 459.2

28

General Filters WATERCO FULFLO D.E. FILTERS Part No. Product Description 230027EURO Fulflo P2027 c/w 1½” MPV 230036EURO Fulflo P2036 c/w 2” MPV 230048EURO Fulflo P2048 c/w 2” MPV

Nom. Size 27 sq.ft 36 sq.ft 48 sq.ft

Air bleed valve

Price € 985.55 € 1,134.17 € 1,243.59

High pressure capacity tank

Pressure gauge

Complete filter septum

Built to endure the rigours and pressures of the outdoor environment, Fulflo DE filter housings are made from specially engineered polymers that have been tested for durability and strength.

The heart of the Fulflo DE filter is the septum, comprising 10 polypropylene covered grids.

These grids are spaced far enough apart to prevent the DE clogging while still allowing backwashing to be 100% effective.

Control valve

Hand-release clamp for easy maintenance Long-lasting smooth poly-propylene fabric ensuring lower startup pressures and longer filter cycles

Sight glass

Sturdy support base

Non-binding polypropylene grids

Specifications Model Number Filter Area (sq m) Average Flow Rate (m³/h) Max. Pool Size (m³) Filter Media (kg)

Maintenance The Fulflo DE Filter’s split tank design incorporates an easy to use clamp that requires no additional tools for simple cartridge removal and replacement, allowing for quick access to the filter cartridge without disturbing the piping and connections.

Dimensions (mm)

P2027

P2036

P2048

2.3

3.3

4.4

15

22

30

90

130

175

1.50

1.75

2.15

850

1050

1250

95

95

95

395

395

615

500

500

500

700

800

800

Height - incl. pressure gauge - to centre outlet - to centre inlet Width Depth (including MPV)

D

Dimensions (mm) Model

A

B

C

D

P2027

850 mm

395 mm

95 mm

500 mm

P2036

1050 mm

395 mm

95 mm

500 mm

P2048

1250 mm

615 mm

95 mm

500 mm

A INLET

B

OUTLET

29

C

General Filters xotuf

WATERCO EXOTUF THERMOPLASTIC TOP MOUNT SAND FILTERS - 3.5 Bar pressure rating Part No. Product Description Price With 1½” Clamp Style Multiport Valve & Barrel Unions (10 yr cond. tank warranty).

MPV supplied with both 50mm metric and 1½” imperial quick connect unions.

2260246DP E600 c/w 6 way MPV € 493.66 2260206DP E500 c/w 6 way MPV € 397.61

Backwash Mode

Filter Mode MULTIPORT VALVE

MULTIPORT VALVE

TO WASTE DIRT FLUSHED OUT

OUTLET VALVE

Manufactured from the highest grade of non corrosive materials and applying precision plastic injection moulding techniques, Thermoplastic filters are built for long lasting performance.

SAND

B

Technical Specification

D

Model No.

F E

A

Valve Size

Inner Dia.

Filter Area

Bed Depth

Max. Flow*

Max. Pool Size

Min. Backwash

Media Volume

Sand 16/30

(“/mm)

(mm)

(sq. m2)

(mm)

(m³/h)

(m3)

(m3/h)

(litres)

(kg)

E500

1½”/50mm

500

0.20

250

7.1

57

8.8

62

90

70

E600

1½”/50mm

600

0.28

250

14

81

12.7

89

130

105

G

Dimension (mm) Model Valve Size E500 1½” / 50mm E600 1½” / 50mm

K H C

A 905 942

B 550 650

C 484 484

D 182 182

E 618 655

F 762 799

G 671 708

H 88 88

V 522 560

WATERCO THERMOPLASTIC TOP MOUNT SAND FILTERS - 2.5 Bar pressure rating Part No. Product Description With 1½” Clamp Style Multiport Valve & Barrel Unions (10 yr cond. tank warranty).

MPV supplied with both 50mm metric and 1½” imperial quick connect unions.

2260165DP T400 c/w 1½” MPV 2260185DP T450 c/w 1½” MPV 2260185DP T450 c/w 1½” MPV

Model B D

T400 T450

G F A

V

E

Valve (mm/inch) 50 / 1 ½ 50 / 1 ½

Inner Dia. (mm) 400 450

Filter Area (sq. m2) 0.13 0.16

Backwash flowrate (m3/h) 5.6 7.1

B 460 504

C 280 280

D 180 180

Sand (kg) 40 75

Zeoplus Glass (kg) 30 60

Bed Depth (mm) 160 250

Dom. flow 3

(m /hr) 6 8

K 108 115

Price

€ 296.16 € 326.46

Max. Pool Size (m3) 36 45

Dimension (mm) Model T400 T450

H

Zeoplus 1- 2.2 Glass (kg)

A 775 840

K C

30

E 530 595

F 642 707

G 584 649

H 34 30

V 481 530

K 89 112

General Filters xotuf SIDE MOUNT WATERCO EXOTUF THERMOPLASTIC SIDE MOUNT SAND FILTERS - 3.5 Bar pressure rating Part No. Product Description Price With 1½” or 2” side mount Multiport valve & barrel unions (10 yr cond. tank warranty).

MPV supplied with both 50mm / 63mm metric and 1½” / 2” imperial quick connect unions.

2260243 E600 side mount filter c/w 1.5”(50mm) valve € 675.75 2260244 E600 side mount filter c/w 2”(63mm) valve € 756.08

Technical Specification

A W

Model

Valve

E600 E600

(mm/inch) 50 / 1½ 63/2

Inner Dia. (mm) 600 600

Filter Area (sq. m2) 0.28 0.28

Backwash flowrate (m3/h) 14 14

Sand (kg) 175 175

Zeoplus Glass (kg) 140 140

Bed Depth (mm) 360 360

Dom. flow (m3/hr) 13.6 13.6

Max. Pool Size (m3) 81 81

R P

Dimension (mm) C

X

V

Z

H

Y F

S

Model E600 1½” E600 2”

A 498 502

B 635 635

C 954 954

W 270 292

R 213 220

P 135 149

E 537 537

F 591 639

K 115 115

V 706 706

H 670 670

L 88 88

X 897 897

Y 735 796

Z 824 824

J 484 484

S 537 537

T 334 334

E T K L

J B

xotuf PLUS DEEP BED WATERCO EXOTUF PLUS DEEP BED SAND FILTERS - 3.5 Bar pressure rating Part No. Product Description With 1½” or 2” side mount Multiport valve & barrel unions (10 yr cond. tank warranty).

MPV supplied with both 50mm / 63mm metric and 1½” / 2” imperial quick connect unions.

2260248DP E600 top mount deep bed c/w 1.5”(50mm) valve 2260249DP E600 top mount deep bed c/w 2”(63mm) valve

Price

€ 612.00 € 642.60

Technical Specification

B D

Model

Valve

E600 E600

(mm/inch) 50/1.5 63/2

Inner Dia. (mm) 600 600

Filter Area (sq. m2) 0.28 0.28

Backwash flowrate (m3/h) 14 14

B 635 635

C 484 484

D 182 220

Sand (kg) 175 175

Zeoplus Glass (kg) 140 140

Bed Depth (mm) 360 360

Dom. flow (m3/hr) 13.6 13.6

Max. Pool Size (m3) 81 81

Dimension (mm) Model E600 1½” E600 2”

A 1095 1148

A F G

V

E

K

H C

31

E 809 824

F 953 1002

G 862 902

H 88 88

V 706 706

K 115 115

General Filters Filament Wound Filters Micron fibreglass filters embody the latest in fibreglass winding technology. Micron fibreglass vessels consist of an inner shell of fiberglass reinforced polyester resin wound over with fibreglass filament.

Waterco’s digitally controlled filament winding machine faultlessly winds continuous strands of high quality fibreglass filament under controlled tension filament to create a seamless one-piece vessel with refined consistency and superior quality. There are no welds or seams or special tank linings which can corrode or electrolyse.

Micron fibreglass filters are known throughout the industry for their impressive performance and reliability. Manufactured from the highest grade of non corrosive materials and applying the latest in fibreglass winding technology, Micron fibreglass filters are designed and built for many years of trouble free operation.

Waterco Micron Top and Sidemount Fibreglass Filters Inflow diffuser for even distribution of water flow across the filter bed.

Pressure gauge.

Six position Multiport valve with sight glass and quick connect half unions.

Fibreglass wound tank, UV and Corrosion Resistant.

Hydraulically balanced laterals to maximise water flow and filtration.

Manual Drain Large filter base for stable floor mounting.

Waterco Side Mount Fibreglass Filter

Micron Top Mount Fibreglass Filter

WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS - 2.5 Bar pressure rating Part No. Product Description Nom. Size Price Filters with 8” neck lock ring c/w Multiport Valve & Barrel Unions (10 year full tank warranty) MPV supplied with both metric and imperial quick connect unions.

22000820EU SM500 c/w 1½” MPV 20” € 620.50 22000824EU SM600 c/w 1½” MPV 24” € 706.51 22000828EU SM700 c/w 2” MPV 28” € 847.81 22000830EU SM750 c/w 2” MPV 30” € 1,102.86 22000836EU SM900 c/w 2” MPV 36” € 1,452.39 WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS -4.0 Bar pressure rating Part No. Product Description Nom. Size Price 220008204EU SM500 c/w 1½” MPV 20” € 694.22 220008244EU SM600 c/w 1½” MPV 24” € 817.09 220008304EU SM750 c/w 1½” MPV 30” € 1,235.44 220008304EU SM900 c/w 2”MPV 36” € 1,946.10 See commercial section for larger size Side Mount Filters up to 2.5m (98”)

Model No.

Inner Dia. (mm)

Bed Depth (mm)

Filter Area (m2)

Valve Size (mm/”)

Sand 16/30 (Kg)

Zeoplus Glass (Kg)

SM500 SM600 SM700 SM750 SM900

500 600 700 750 900

290 360 380 400 400

0.20 0.28 0.38 0.44 0.64

50/1½ 50/1½ 63/2 63/2 63/2

90 140 190 210 360

74 115 156 173 296

Model SM500 SM600 SM700 SM750 SM900

A 464 518 565 587 667

B C 520 815 622 880 719 948 772 993 923 1115

W 310 310 321 321 321

R 215 215 248 248 248

32

P 153 153 178 178 178

E 594 629 520 593 656

F 649 684 601 674 737

K 100 105 120 113 113

Dom. flow (m /hr) 10 14 19 21 31 3

V 652 680 728 763 860

Max. Pool Size (m3)

56 81 111 127 183

H L X 585 70 743 601 88 804 685 90 905 652 120 914 750 120 1030

Com. flow (m /hr) 7 10 14 16 23 3

Y Z 790 715 825 778 750 835 823 892 886 1011

Min. Pool Size (m3)

43.2 60.5 82.1 95.0 138.2 J 445 540 620 678 678

S 485 520 520 593 656

T 282 317 317 390 453

General Filters WATERCO MICRON TOP MOUNT BOBBIN WOUND SAND FILTERS - 2.5 Bar pressure rating Part No. Product Description Nom. Size Price With Multiport Valve & Barrel Unions (10 year full tank warranty).

MPV supplied with both metric and imperial quick connect unions 220122DP S500 c/w 1½” MPV 20” € 500.20 220124DP S600 c/w 1½” MPV 24” € 596.63 220129DP S702 c/w 2” MPV 28” € 825.63 220130DP S750 c/w 2” MPV 30” € 982.32 220132DP S800 c/w 2” MPV 32” € 1,042.59

Model No. B D

G F A

V

E

S500 S600 S700 S702 S750 S800

K

H

C

Model S500 S600 S700 S702 S750 S800

Inner Dia. (mm) 500 600 700 700 750 800

Bed Depth (mm) 280 295 330 340 340 420

A 864 968 932 992 1132 1077

Filter Area (m2) 0.20 0.29 0.40 0.40 0.46 0.50 B 505 622 723 723 772 810

Valve Size (mm/”) 50/1½ 50/1½ 50/1½ 63/2 63/2 63/2

Sand (kg) 80 160 200 200 220 365

Zeoplus Glass (kg) 60 121 151 151 166 203

C 443 540 620 620 620 620

D 180 180 180 220 220 220

E 625 721 692 722 867 807

Max. Pool Size (m3) 57 83 115 115 132 144

Dom. flow (m /hr) 10 14 19 19 22 24 3

F 731 832 801 871 1014 956

G 672 778 743 791 932 875

H 69 88 90 90 90 90

Min. Pool Size (m3) 28 41 56 56 64 72

Com. flow (m /hr) 7.2 10.4 14.4 14.4 16.5 18.00 3

V 525 620 650 652 773 713

K 94 136 139 122 127 111

WATERCO MICRON TOP MOUNT BOBBIN WOUND DEEP BED FILTERS - 2.5 Bar pressure rating Part No. Product Description Nom.Size Price With Multiport Valve & Barrel Unions (10 year full tank warranty).

MPV supplied with both metric and imperial quick connect unions 224400 SD400 c/w 1½” MPV 16” € 571.07 2245001 SD500 c/w 1½” MPV 20” € 639.35 22460251 SD600 c/w 1½” MPV 24” € 751.09 2247501 SD750 c/w 2” MPV 30” € 1,191.81 224900 SD900 c/w 2” MPV 36” € 1,644.94

Filter model B D

V

E

H

SD400 SD500 SD600 SD750 SD900

GFA

K C

Inner Bed Filter Diameter Depth Area (mm) (mm) (m2) 400 500 0.13 500 500 0.20 600 500 0.28 750 500 0.44 900 500 0.64

Filter Model A B C D E F G H V K

SD400 1135 405 356 180 899 1006 949 61 812 90

33

Valve Size (mm/”) 50/1½ 50/1½ 50/1½ 63/2 63/2

Sand 16/30 (kg) 90 135 190 300 440

SD500 1135 505 443 180 895 1006 949 69 813 90

Zeoplus Glass (kg) 68 102 143 226 332

Dom. flow (m3/hr) 6.6 9.4 13.5 21.1 30.5 SD600 1135 624 540 180 897 1006 949 88 794 125

Max. Pool size (m3) 36 57 81 127 184 SD750 1235 776 678 220 970 1122 1041 120 838 125

Com. flow (m3/hr) 4.5 7.08 10.2 15.9 22.92

Min. Pool size (m3) 27 43 61 95 138

SD900 1288 910 678 220 1022 1177 1094 120 880 172

General Filters LACRON SUREFLOW TMV - TOP MOUNT SAND FILTER 2.5 BAR Pressure rating Part No. Product Description Nom. Size MPV supplied with both metric and imperial quick connect unions, pressure gauge and air relief valve 2220180 TMV-18 c/w MPV 1½” (50mm) 18” 2220200 TMV-20 c/w MPV 1 1/2” (50mm) 20” 2220240 TMV-24 c/w MPV 1½” (50mm) 24”

B D

Filter model

Tank Diameter Bed Depth Filter Area (mm) (mm) (m2)

TMV-18 TMV-20 TMV-24 V

E

H

GFA

460 500 610

Model TMV-18 TMV-20 TMV-24

350 365 380 A 885 900 950

B 460 500 610

0.166 0.200 0.300 C 360 360 490

Valve Size (mm/inch) 50 / 1½ 50 / 1½ 50 / 1½ D 180 180 180

Pea Gravel (kg) NR NR NR

E 635 650 700

Sand (kg) 75 100 125

F 745 755 800

€ 528.35 € 566.72 € 724.94

Max. flow (m3/hr) 8.5 10.0 14.5

Zeoplus Glass (kg) 60 80 100 G 685 700 750

Price

H 65 65 70

Max. Pool size (m3) 50 60 85

V 570 585 660

K 100 100 100

K C

LACRON BOBBIN WOUND - LFW - SIDE MOUNT FILTER 2.5 BAR Pressure rating Part No. Product Description Nom. Size MPV supplied with both metric and imperial quick connect unions, pressure gauge and air relief valve 20” 2205205 LFW-20 c/w MPV 50mm/ 1 1/2” 24” 2205240 LFW-24 c/w MPV 50mm/ 1 1/2” 28” 2205250 LFW-28 c/w MPV 50mm/ 1 1/2” 2205301 LFW-30 c/w MPV 63mm/ 2” 30”

Filter model LFW-20 LFW-24 LFW-28 LFW-30

Model LFW-20 LFW-24 LFW-28 LFW-30

Tank Diameter (mm) 500 600 700 750

A 73 73 73 73

Bed Depth (mm) 450 475 500 525

B 500 600 700 760

Filter Area (m2) 0.20 0.30 0.38 0.45

C 520 622 720 770

34

D 230 230 230 230

Valve Size (mm/inch) 50 / 1½ 50 / 1½ 50 / 1½ 63 / 2

E 61 61 61 81

F 203 203 203 203

Pea Gravel (kg) NR NR NR NR

G 287 317 320 337

Sand (kg) 90 140 190 220

Zeoplus Glass (kg) 75 120 160 180

H 730 800 820 850

I 70 85 90 120

J 85 100 115 130

Max. flow (m3/hr) 10 14 19 22

K 445 540 620 680

Price

€ 632.79 € 731.08 € 825.63 € 1,102.86

Max. Pool size (m3) 60 85 115 130

L 900 945 1000 1100

X 485 520 520 590

General Filters LACRON SUREFLOW LSR - SIDE MOUNT SAND FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Connecting Pipes & Pressure Gauge 222016 LSR - 16 1½” Connections (50mm) 16” 222018 LSR - 18 1½” Connections (50mm) 18” 222020 LSR - 20 1½” Connections (50mm) 20” 222024 LSR - 24 1½” Connections (50mm) 24” 222030 LSR - 30 2” Connections (63mm) 30”

Filter model LSR-16 LSR-18 LSR-20 LSR-24 LSR-30

Model LSR-16 LSR-18 LSR-20 LSR-24 LSR-30

Tank Diameter (mm) 400 460 500 610 760

B 450 460 500 610 762

Bed Depth (mm) 300 350 365 380 400

C 465 475 525 625 780

Filter Area (m2) 0.130 0.160 0.200 0.300 0.460

D 230 230 230 230 230

F 204 204 204 204 214

Pea Gravel (kg) NR NR NR NR 50

Sand

Zeoplus Glass (kg) 40 60 80 100 125

(kg) 50 75 100 125 150

G 235 240 265 295 290

H 620 660 700 730 780

LSR-16 LSR-18 LSR-20 LSR-24 LSR-30

Model LSR-16 LSR-18 LSR-20 LSR-24 LSR-30

Tank Diameter (mm) 400 460 500 610 760

A 78 78 78 78 70

Bed Depth (mm) 300 350 365 380 400

B 450 460 500 610 762

35

C 465 475 525 625 780

Filter Area (m2) 0.130 0.160 0.200 0.300 0.460

D 230 230 230 230 230

Valve Size (mm/inch) 50 / 1½ 50 / 1½ 50 / 1½ 50 / 1½ 63 / 2

E 54 54 54 54 81

F 204 204 204 204 214

Pea Gravel (kg) NR NR NR NR NR

G 235 240 265 295 290

Sand

€ 430.05 € 559.06 € 651.22 € 718.80 € 1,217.36

Max. flow (m3/hr) 6.5 8.5 10 14.5 22.5

I 65 65 65 65 85

J 70 70 70 70 90

Max. Pool size (m3) 37 50 60 85 130

K 374 374 374 484 620

LACRON SUREFLOW LSR - SIDE MOUNT SAND FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Multiport Valve - Unions & Pressure Gauge 222016ACW LSR - 16 c/w 1½” MPV (50mm) 16” 222018ACW LSR - 18 c/w 1½” MPV (50mm) 18” 222020ACW LSR - 20 c/w 1½” MPV (50mm) 20” 222024ACW LSR - 24 c/w 1½” MPV (50mm) 24” 222030ACW LSR - 30 c/w 2” MPV (63mm) 30”

Filter model

Price

(kg) 50 75 100 125 200

Zeoplus Glass (kg) 40 60 80 100 160

H 620 660 700 730 780

I 65 65 65 65 85

J 70 70 70 70 90

Max. flow (m3/hr) 6.5 8.5 10 14.5 22.5

K 374 374 374 484 620

X 300 350 365 380 400

Price € 552.92 € 632.79 € 724.94 € 792.52 € 1,325.84

Max. Pool size (m3) 37 50 60 85 130

L 725 790 900 945 1100

X 300 350 365 380 400

General Filters LACRON PLUS - TOP MOUNT DEEP BED FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Multiport Valve Unions and Pressure Gauge 2228500251 Lacron Plus TM 20” c/w 1½” MPV 20” 2228600251 Lacron Plus TM 24” c/w 1½” MPV 24”

Filter Model

A

B

F

TM-20 TM-24

E

Tank Diameter

Bed Depth

Filter Area

Valve Size

Pea Gravel

Sand

Zeoplus Glass

Max. Flow

(mm)

(mm)

(m2)

(inch,mm)

(kg)

(kg)

(kg)

500 610

800 800

0.200 0.300

11/2 / 50 11/2 / 50

NR NR

230 330

160 260

(m3/hr, Std) 10 14.5

Price € 1,051.25 € 1,301.60

Max. Pool Size (m3) 60 85

D

Model TM-20 TM-24

G C

A 1500 1497

B 1214 1211

C 595 595

D 940 932

E 800 800

F 1000 1000

G 106 106

LACRON PLUS - SIDE MOUNT DEEP BED FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Multiport Valve Union and Pressure Gauge 222820251 Lacron Plus SM 20” c/w 1½” MPV 20” 222824251 Lacron Plus SM 24” c/w 1½” MPV 24” 2228302521 Lacron Plus SM 30” c/w 2” MPV 30”

Filter Model

SM-20 SM-24 SM-30 E A

A G

Bed Depth

Filter Area

Valve Size

Pea Gravel

Sand

Zeoplus Glass

Max. Flow

(mm)

(mm)

(m2)

(inch,mm)

(kg)

(kg)

(kg)

500 610 760

800 800 800

0.20 0.30 0.46

11/2 / 50 11/2 / 50 2 / 63

NR NR NR

230 330 620

180 260 420

(m3/hr, Std) 10 15 22.5

€ 1,129.75 € 1,329.18 € 1,495.73

Max. Pool Size (m3) 60 85 130

E

D

F

Tank Diameter

Price

F

D

G B

B

Model SM-20 SM-24 SM-30

A 1225 1225 1270

B 469 499 504

C 595 595 595

D 926 932 910

E 800 800 800

F 1000 1000 1000

G 204 204 214

C

S av e t i m e , wat e r a n d e n e r g y.

The Lacron Plus deep bed sand filter improves the filtration efficiency over standard filters by providing enhanced in-depth filtration and increased dirt capacity. The filter’s bed depth retains finer dirt particles and colloidal particles to a far greater level than a filter with a standard bed depth.

36

General Filters WATERCO MONOBLOC SYSTEMS Part No. Product Description WATERCO SAND FILTRATION MONOBLOC SYSTEMS 22620161SKID Thermoplastic 400, MPV & Aquamite 033 pump 22620181SKID Thermoplastic 450, MPV & Aquamite 050 pump 2262020SKID Thermoplastic 500, MPV & Aquamite 075 pump 2262024SKID Thermoplastic 600, MPV & Aquamite 100 pump Model

Valve

T400 T450 T500 T600

(mm/inch) 50 / 1 ½ 50 / 1 ½ 50 / 1 ½ 50 / 1 ½

Inner Dia. (mm) 400 450 500 600

Model

Filter Area (sq. m2) 0.13 0.16 0.20 0.28

HP

2402033 Aquamite 33 2402050 Aquamite 50 2402075 Aquamite 75 2402100 Aquamite 100 2402125 Aquamite 125

0.33 0.50 0.75 1.00 1.25

Backwash flowrate (m3/h) 5.6 7.1 8.8 12.7

Pmax kW 0.53 0.58 0.65 0.76 0.88

Sand

Zeoplus

(kg) 40 75 90 120

(kg) 30 60 70 90

Amps

Phase

2.3 2.50 3.00 3.33 3.90

1 1 1 1 1

Total Length 497 497 497 520 520

Bed Depth (mm) 160 250 250 250 Motor Frame 63 63 63 71 71

Nom. Size

Price

16” 18” 20” 24”

€ 791.88 € 837.81 € 984.48 € 1,058.26

Dom. flow (m3/hr) 6 8 10 14

Max. Pool Size (m3) 36 45 57 81

Flow Rate Qmax.

11.3m3/hr 14.4m3/hr 16.8m3/hr 19.8m3/hr 22.2m3/hr

MOULDED SKID BASES - (both sizes suit all Cartridge Filters) Part No. Product Description 455567 Moulded Skid Base suit T400, T450 455569 Moulded Skid Base suit T500, T600

Price € 42.19 € 50.62

Ø300 Ø284

Ø240 Ø224 640

470

78 .4 Ø2

373

Ø437 Ø347

758 65

65 813

695

MONOBLOC ACCESSORIES Part No. Product Description WCPY792 2ft Connector Hose 1½” WCI22312 Quick Connect Barb Union 1½”

37

Price € 13.17 € 8.65

Waterco Commercial Filters

www.waterco.eu

Commercial Filters www.waterco.eu

Waterco Commercial Filters

Commercial Filters

Micron fibreglass filters Micron fibreglass filters embody the latest in fibreglass winding technology. Waterco’s digitally controlled filament winding machine faultlessly winds continuous strands of high quality fibreglass filament under controlled tension to create a seamless one-piece vessel with refined consistency and superior quality. There are no welds or seams or special tank linings which can corrode or electrolyse.

Waterco’s quality control procedures ensure that the structural requisites of the product are achieved at every stage of production.

This results in a 100% compliance of the end product with the specifications.

The design and the manufacturing process of the whole vessel, utilising the latest filament winding machines, incorporation of non metallic fittings plus reinforced manhole openings with proprietary methods, is unique to Waterco.

Why fibreglass instead of steel?

Using non metallic components fibreglass pressure tanks are rapidly replacing steel tanks in numerous applications. Fibreglass vessels offer several advantages in comparison with steel vessels.

Fibreglass vessels have a mechanical and chemical resistance superior to steel. Fibreglass tanks do not rust or corrode and are able to withstand damage from many types of water treatment chemicals.

Fibreglass vessels weigh only 1/3 the weight of steel vessels while maintaining the same level of strength. Their weight makes them easier to ship to the job site and easier to install.

Once installed there are virtually no maintenance or repairs required. Steel vessels require the anti-corrosive coating to be maintained periodically and certified welders to make repairs to the lining with expensive epoxy coating.

40

Commercial Filters Micron “Fish Tail” laterals Conventional laterals are not suitable for larger sized commercial filters. “Dead legs” exist between the laterals and water flow is not optimised through the filter bed. Waterco’s “Fish Tail” lateral configuration eliminates any “dead legs” by improving water flow distribution through the filter bed.

Conventional lateral configuration

Commercial vertical filters with 3” / 90mm ports

Commercial vertical filters with 2 ½” / 75mm ports

Easy Reach Air Release System Waterco are the first to introduce the benefits of the “easy reach” air bleed system for commercial filters.

Located directly under the sight glass, a valve may be fitted to the tank, which is connected directly to an internal air bleed system allowing any air to be simply bled from the filter without the need to manually bleed the air from filter lid or to use additional plumbing.

41

Commercial vertical filters with 4”/110mm, 6”/160mm, 8”/215mm ports

Commercial Filters MICRON SIDE MOUNT BOBBIN WOUND SAND FILTER - SMD Model Large double yoke lid with lifting eye Pressure gauge Quick connect unions (Up to and including SMD2000) Water purge and sand dump port Large stable base Fish Tail lateral configuration for maximum hydraulic performance

• 1m bed depth • Ultra smooth bobbin finish • Available in 2.5 bar, 4 bar, 6 bar and 8 bar pressure ratings • Vinylester resin coating available • Quick connect unions • Nozzle plate available upon request

MICRON SIDE MOUNT DEEP BED SAND FILTER - SMDD Model Pressure gauge Large double yoke lid and lifting eye Large clear sight glass Flanged connections Service hatch Large stable base Fish Tail lateral configuration for maximum hydraulic performance

• 1.2 m bed depth • Ultra smooth bobbin finish • Available in 2.5 bar, 4 bar, 6 bar and 8 bar pressure ratings • Vinylester resin coating available • Flanged connections • Nozzle plate version (SPDD)

42

Commercial Filters WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS - SMD 2.5 Bar Part No. Product Description Nom. Size - Excludes MPV (2.5 Bar) SMD1050 (3”/90mm port size) 42” 22501050801 SMD1200 (3”/90mm port size) 48” 22501200801 SMD1400 (3”/90mm port size) 56” 22501400801 SMD1600 (3”/90mm port size) 64” 22501600801 SMD1600 (4”/110mm port size) 64” 225016001001 SMD1800 (4”/110mm port size) 70” 225018001001 SMD2000 (4”/110mm port size) 79” 225020001001

Price € 3,151.64 € 3,753.71 € 4,644.53 € 5,799.51 € 6,075.97 € 7,452.13 € 9,209.18

WATERCO MICRON SIDE MOUNT BOBBIN WOUND SAND FILTERS - SMD 4.0 Bar Part No. Product Description Nom. Size Price - Excludes MPV (4.0 Bar) SMD1050 (3”/90mm port size) 42” € 4,097.13 225010508014 SMD1200 (3”/90mm port size) 48” € 4,879.82 225012008014 SMD1400 (3”/90mm port size) 56” € 6,038.50 225014008014 SMD1600 (3”/90mm port size) 64” € 7,539.37 225016008014 64” € 7,898.76 2250160010014 SMD1600 (4”/110mm port size) 70” € 9,688.38 2250180010014 SMD1800 (4”/110mm port size) 79” € 11,973.78 2250200010014 SMD2000 (4”/110mm port size) PLEASE NOTE: Also available in 6.0 Bar and 8.0 Bar versions, price and lead times available upon request.

Lateral under drain system

WATERCO MICRON SMD OPTIONAL EXTRAS Product Description W22115LAB Sight Glass Fitted W22115 Sight Glass SSHR200 Side Service Hatch - Round SSHR320 Side Service Hatch - Round SSHO320 Side Service Hatch - Oval SSHO420 Side Service Hatch - Oval *Lead times applicable for the above optional extras.

Side hatch / Lateral manhole cover Side hatch / Lateral manhole cover Part No.

Filter Model

SMD1050 SMD1200 SMD1400 SMD1600 SMD1600 SMD1800 SMD2000

Connection Size

Bed Maximum Flow Maximum Flow Depth Rating Rating 30m3/hr/m2 40m3/hr/m2

Price € 410.77 € 308.12 € 523.68 € 928.36 € 880.75 € 1,728.19

Sand

ZeoPlus Glass

Discharge Volume after 5 minute Backwash Rinse cycle

mm

”

m2

mm

m3/hr

m3/hr

kg

kg

m3

90 90 90 90 110 110 110

3.0 3.0 3.0 3.0 4.0 4.0 4.0

0.87 1.13 1.54 2.01 2.01 2.54 3.14

1000 1000 1000 1000 1000 1000 1000

26 34 46 60 60 76 94

35 45 62 80 80 102 126

1410 1720 2515 3170 3060 4205 5140

1159 1414 2067 2605 2515 3456 4225

2.9 3.8 5.1 6.7 6.7 8.5 10.5

Connection Size SMD1050 90 3.0” SMD1200 90 3.0” SMD1400 90 3.0” SMD1600 90 3.0” SMD1600* 110 4.0” SMD1800* 110 4.0” SMD2000* 110 4.0” Model

Filter Area

Nom. Size 90mm 90mm 200mm 320mm 320 x 200mm 420 x 320mm

A

B

C

W

R

P

E

F

K

V

H

L

X

Y

Z

J

S

T

901 977 1083 1184 1765 1863 1964

1077 1229 1442 1644 1644 1839 2042

1890 1905 1955 1994 1994 1985 2063

510 510 510 510 943 943 943

363 363 363 363 474 474 474

548 548 548 548 629 629 629

1100 1154 1204 1151 757 751 758

1210 1264 1314 1261 419 413 420

176 176 218 218 419 315 245

1587 1568 1615 1615 1615 1660 1765

1470 1400 1500 1500 1470 1550 1550

176 176 218 218 218 315 245

1805 1820 1870 1909 1909 1900 1978

1482 1536 1586 1533 757 751 758

1735 1750 1800 1839 1839 1830 1908

1045 1045 1202 1202 1202 1755 1755

1100 1154 1204 1151 1200 1183 1190

744 798 848 795 717 751 758

43

Commercial Filters WATERCO MICRON SIDE MOUNT DEEP BED SAND FILTERS - SMDD 2.5 Bar Part No. Product Description Nom. Size - Excludes MPV (2.5 Bar) 30” 224975051826L SMDD750 (2”/63mm connections , 200mm service hatch) 36” 224990080136L SMDD900 (3”/90mm connections, 200mm service hatch) 42” 2249105080136L SMDD1050 (3”/90mm connections, 200mm service hatch) 48” 224912008025L SMDD1200 (3”/90mm connections, 420 x 320mm service hatch) 56” 224914001025L SMDD1400 (4”/110mm connections 420 x 320mm service hatch) 64” 224916001025L SMDD1600 (4”/110mm connections 420 x 320mm service hatch) 70” 224918001525L SMDD1800 (6”/160mm connections 420 x 320mm service hatch) 79” 224920001525L SMDD2000 (6”/160mm connections 420 x 320mm service hatch) 96” 224923501525L SMDD2350 (6”/160mm connections 420 x 320mm service hatch) WATERCO MICRON SIDE MOUNT DEEP BED SAND FILTERS - SMDD 4.0 Bar Part No. Product Description Nom. Size - Excludes MPV (4.0 Bar) 30” 224975451826L SMDD750 (2”/63mm connections, 200mm service hatch) 36” 224990480136L SMDD900 (3”/90mm connections, 200mm service hatch) 42” 2249105480136L SMDD1050 (3”/90mm connections, 200mm service hatch) 48” 2249120043037L SMDD1200 (3”/90mm connections 420 x 320mm service hatch) 56” 224914041025L SMDD1400 (3”/90mm connections 420 x 320mm service hatch) 64” 224916041025L SMDD1600 (4”/110mm connections 420 x 320mm service hatch) 70” 224918041525L SMDD1800 (6”/160mm connections 420 x 320mm service hatch) 79” 224920041525L SMDD2000 (6”/160mm connections 420 x 320mm service hatch) 96” 224923541525L SMDD2350 (6”/160mm connections 420 x 320mm service hatch)

Price € 1,693.32 € 2,859.41 € 3,827.02 € 4,546.52 € 5,625.78 € 7,368.72 € 9,037.22 € 11,102.70 P.O.A.

Price € 2,320.34 € 3,756.17 € 4,612.47 € 5,910.48 € 7,313.51 € 9,579.33 € 10,893.07 P.O.A. P.O.A.

PLEASE NOTE: Also available in 6.0 Bar and 8.0 Bar versions, price and lead times available upon request.

Lateral under drain system

Filter Model

Flange Flange Size Size

SMDD750 SMDD900 SMDD1050 SMDD1200 SMDD1400 SMDD1600 SMDD1800 SMDD2000 SMDD2350 SMDD2500

Model SMDD750 SMDD900 SMDD1050 SMDD1200 SMDD1400 SMDD1600 SMDD1800 SMDD2000 SMDD2350 SMDD2500

Flange Size 63 mm 2” 90 mm 3” 90 mm 3.0” 90 mm 3.0” 110 mm 4.0” 110 mm 4.0” 160 mm 6.0” 160 mm 6.0” 160mm 6.0” 160 mm 6.0”

A 613 824 901 977 1205 1306 n/a n/a n/a n/a

B 772 923 1110 1229 1442 1644 1839 2042 2390 2575

C 2044 2268 2270 2243 2313 2285 2260 2398 2435 2510

mm 63 90 90 90 110 110 160 160 160 160

” 2 3 3 3 4 4 6 6 6 6

W 334 510 510 510 689 689 n/a n/a n/a n/a

R 262 363 363 363 556 474 n/a n/a n/a n/a

Filter Area

Bed Depth

m2 0.44 0.64 0.87 1.13 1.54 2.01 2.55 3.14 4.34 4.91

mm 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200

P 191 548 548 548 440 629 n/a n/a n/a n/a

44

E 1586 1680 1650 1665 1330 989 n/a n/a n/a n/a

F 1688 1790 1760 1775 1465 651 n/a n/a n/a n/a

Maximum Maximum Sand ZeoPlus Flow Flow Glass Rating Rating 3 2 3 2 30m /hr/m 40m /hr/m m3/hr 13 19 26 34 46 60 76 94 130 130

K 113 155 220 190 200 200 210 300 355 355

V 1780 1930 1950 1900 1975 1950 2010 2100 2118 2190

m3/hr 18 25 35 45 62 80 102 126 174 174

H 1713 1780 1820 1790 1800 1800 1810 1900 1955 1955

L 120 155 176 176 218 218 315 245 340 340

kg 795 1200 1665 2045 2840 3685 4975 6090 8480 9630

X 2011 2183 2185 2158 2228 2200 2175 2313 2330 2405

Y 1845 2062 2032 2047 1774 1865 n/a n/a n/a n/a

kg 630 986 1386 1681 2334 3029 4089 5005 6970 7250

Z 1938 2113 2115 2088 2158 2130 2105 2243 2330 2405

Discharge Volume after 5 minute Backwash Rinse cycle m3 1.4 2.1 2.9 3.8 5.1 6.7 8.5 10.5 14.4 16.4

J 678 735 1045 1045 1202 1202 1755 1755 2037 2037

S T 1586 1383 1433 733 1450 750 1449 749 1514 814 1529 829 1489 789 1489 789 1550 950 1550 950

Commercial Filters Waterco Micron Nozzle Plate Sand Filters - SPDD 2.5 Bar Part No. Product Description SPDD 1050 - (3”/90mm connections ,200mm service hatch) 22791050801 SPDD 1200 - (3”/90mm connections , 420 x 320mm service hatch) 22791200801 SPDD 1400 - (4”/110mm connections 420 x 320mm service hatch) 227914001001 SPDD 1600 - (4”/110mm connections 420 x 320mm service hatch) 227916001001 SPDD 1800 - (6”/160mm connections 420 x 320mm service hatch) 227918001501 SPDD 2000 - (6”/160mm connections 420 x 320mm service hatch) 227920001501 SPDD 2350 - (6”/160mm connections 420 x 320mm service hatch) 227923501501

Nom. Size 42” 48” 56” 64” 70” 79” 96”

Price € 7,088.35 € 7,779.39 € 9,876.62 € 11,892.36 € 14,681.78 € 17,316.23 P.O.A.

Micron SPDD filters are fitted with a plate and nozzle system, which ensures uniform flow for both filtering and backwashing, ensuring maximum performance through the media bed.

The nozzle plate system also allows the introduction of pressurised air directly into the bottom of the filter media.

Uniform introduction of air and water through the nozzle plate provides vigorous agitation and filter media bed expansion required for an effective air/water backwash leading to reduced backwashing times and reduced volumes of water. Save up to 25% of backwash water.

PLEASE NOTE: Also available in 4.0 Bar, 6.0 Bar and 8.0 Bar versions, price and lead times available upon request.

Conventional lateral configuration

Nozzle plate configuration

Nozzle Plate under drain system

Internal Nozzle Plate Service Hatch Filter Model

Flange Flange Size Size

SPDD1050 SPDD1200 SPDD1400 SPDD1600 SPDD1800 SPDD2000 SPDD2350

mm 90 90 110 110 160 160 160

” 3.0 3.0 4.0 4.0 6.0 6.0 6.0

Model SPDD1050 SPDD1200 SPDD1400 SPDD1600 SPDD1800 SPDD2000 SPDD2350

Flange Size 90 3” 90 3” 110 4” 110 4” 160 6” 160 6” 160 6”

45

B 1077 1229 1442 1644 1839 2042 2390

Filter Area

Bed Maximum Maximum Sand Zeoplus Depth Flow Rating Flow Rating Glass 30m3/hr/m2 40m3/hr/m2

m2 0.87 1.13 1.54 2.01 2.54 3.14 4.34

mm 1200 1200 1200 1200 1200 1200 1200

C K 2270 220 2243 150 2313 200 2285 200 2260 320 2398 320 2435 355

V 1950 1900 1975 1950 2010 2100 2118

m3/hr 26 34 46 60 76 94 130 H 1820 1750 1800 1800 1920 1920 1955

m3/hr 35 45 62 80 102 126 174 L 176 176 218 218 315 245 340

X 2185 2158 2228 2200 2175 2313 2330

Z 2115 2088 2158 2130 2105 2243 2330

Kg 1485 1930 2640 3455 4330 5360 7430 J 1045 1045 1202 1202 1755 1755 2037

kg 1221 2170 2170 2840 3559 4405 6107 S 1450 1449 1514 1529 1489 1489 1550

T 750 749 814 829 789 789 950

Discharge Volume after 5 minute Backwash Rinse Cycle m3 2.9 3.7 5.1 6.6 8.4 10.4 14.3

Commercial Filters Micron Horizontal Filters The Micron Horizontal Filter is a space saving high performer; its compact horizontal design allows installation with minimum waste of space.

The shape of the Micron Horizontal Filter is both attractive and functional. The spherical ends are designed to give uniform flow from both inlet and outlet collection assemblies. Micron Horizontal Filters are available with a 500mm (M) filter media bed and a 1200mm (MD) filter media bed.

Sturdy service manhole.

Inlet & Outlet ports located for ease of plumbing.

Automatic air release.

Looped distribution and lateral system.

Fibreglass wound tank, UV and Corrosion Resistant.

Large stable support skirt.

Looped distribution and lateral system Waterco has introduced a looped lateral configuration for its entire range of commercial horizontal fibreglass filters. Conventional horizontal filter lateral systems consist of straight piping fitted with laterals along the length of the horizontal filter.

A conventional lateral system results in uneven fluidisation of the filter media bed. The beginning of the lateral system experiences a strong flow of water, which gradually decreases along the length of the lateral piping. Backwash flow also decreases towards the end of each lateral, resulting in non-uniform lifting of the filter media bed.

Conventional horizontal filter lateral configuration

Waterco has vastly improved the hydraulic efficiency of its horizontal filter lateral system by looping its distributors and laterals. The new lateral configuration provides a more natural flow of water through the filter, ensures optimum water filtration and balanced fluidisation of the filter bed during backwashing. Its individual laterals are shortened while maintaining filter media bed coverage, reducing the friction head loss of each lateral, further improving the filter’s hydraulic efficiency.

Waterco’s looped lateral system reduces backwash run times, saves water and produces a flatter more uniform filter media bed after backwashing.

Looped lateral system - Inside view

Looped lateral system - Top view

46

Commercial Filters WATERCO MICRON COMMERCIAL HORIZONTAL SAND FILTERS (2.5 Bar) Part No. Product Description Nom. Size 22280102 M2500 (4”/110mm port connections) 2.50m² 22290151 M3750 (4”/110mm port connections) 3.75m² 22290150 M3750 (6”/160mm port connections) 3.75m² 222902060 M5000 (6”/160mm port connections) 5.00m² Filter Model M2500 M3750 M3750 M5000

Overall Length mm 2300 3350 3350 4340

Overall Height mm 1480 1485 1485 1486

Overall Width mm 1310 1310 1310 1310 Model M2500 M3750 M5000

Valve Size (mm/”) 110/4 110/4 160/6 160/6 A 2245 3230 4220

Bed Depth (mm) 500 500 500 500 C 1620 1620 1620

Filter Area (m2) 2.50 3.75 3.75 5.00 W 740 740 740

Zeoplus Sand Glass 16/30 (kg) (kg) 1742 2120 2844 3460 2844 3460 3830 4660

Max. flow 30m3/hr/m2 (m3/hr) 75 113 113 150

R L E F 1320 1400 1005 1260 1320 2520 945 1260 1320 3570 945 1260

G 150 150 150

Price € 10,065.51 € 15,667.78 € 16,781.48 € 20,038.22 Max. flow 40m3/hr/m2 (m3/hr) 100 150 150 200 H 255 275 275

M 2327 3312 4301

WATERCO MICRON HORIZONTAL DEEP BED Bobbin wound FILTERS 1.2m bed depth (2.5 Bar) Part No. Product Description Nom. Size Price 222902208 MD5500 (8”/200mm port connections) € 17,735.22 222902508 MD6500 (8”/200mm port connections) € 21,913.62 222908000815 MD8000 (8”/200mm port connections) € 28,797.10 2229040010 MD10000 (10”/260mm port connections) € 35,229.38 Filter Model MD5500 MD6500 MD8000 MD10000

Overall Length mm 3122 3635 4386 5850

Overall Height mm 2173 2244 2173 2173

Overall Flange Width Size mm (mm/”) 2000 200/8” 2000 200/8” 2000 200/8” 2000 280/10”

Bed Depth (mm) 1200 1200 1200 1200

Filter Area (m2) 5.50 6.50 8.00 11.00

Zeoplus Glass (kg) 6043 9058 11753 14540

Sand 16/30 (kg) 9280 11020 14300 19460

Max. flow 30m3/hr/m2 (m3/hr) 165 195 240 300

Max. flow 40m3/hr/m2 (m3/hr) 220 260 320 400

* Flow rate is limited by the port size, max flow for 8”/ 200mm is 422.4 & 10”/ 260mm is 654m3/hr.

Model MD5500 MD6500 MD8000 MD10000

47

A 3122 3635 4386 5850

C 2260 2260 2260 2260

W 1120 1120 1120 1120

R 1988 2066 2066 2032

L 1880 2405 3155 4055

E 1840 1890 1906 1883

F 2000 2000 2000 2000

G 230 230 230 230

H 240 240 306 283

M 3330 3900 4690 5730

Commercial Filters

hydron split-tank filters HYDRON SPLIT FILTER Part No. Product Description Filter Only 223912008014 HYDRON SPLIT FILTER 1200h 3”FL LCN 223914008014 HYDRON SPLIT FILTER 1400h 4”FL LCN 223916008014 HYDRON SPLIT FILTER 1600h 4”FL LCN 223918008014 HYDRON SPLIT FILTER 1800h 6”FL LCN

Nom. Size

Price

48” 56” 64” 70”

€ 10,515.18 € 11,510.70 € 12,692.88 € 18,425.83

Ideal for retrofitting Designed for water treatment and commercial swimming pool facilities, built using the lasts in gel coated fibreglass technology.

• Durable • Easy to maintain • Flanged tank port connections • Perfect for retrofit • Easy transport • Flexible configurations available • Sight glass available

Hydron Split tank can be delivered in two parts and assembled on site in the plant room. The two halves seal perfectly using a double o ring and held together by a flange using bolts and nuts. The filter is specifically designed to fit through existing standard size plant room doors.

Model No: SMDT 1200 SMDT 1400 SMDT 1600 SMDT 1800

Model SMDT 1200 SMDT 1400 SMDT 1600 SMDT 1800

Valve Size in 3 4 4 6

Bed Depth Inner Diameter mm 1000 1000 1000 1000

A 1010 1008 995 1105

in 39.4 39.4 39.4 39.4

mm 1200 1400 1600 1800

B 1095 1165 1130 1100

48

in 47.3 55.2 63.0 70.9

Filter Area m2 1.13 1.54 2.01 2.54

C 700 700 700 700

feet2 12.18 16.58 21.66 27.41

Filtration Flow Rates Backwash Flow Rates 30m3/hr/m2 36m3/hr/m2 40m3/hr/m2 50m3/hr/m2 m³/hr m³/hr 34 41 45 57 46 55 62 77 60 72 80 101 76 92 102 127

D 749 814 829 789

E 2088 2170 2130 2188

F 2245 2330 2285 2355

G 1045 1200 1200 1760

Sand kg 1720 2515 3170 4205

Glass Media kg 1414 2067 2605 3456

H 1521 1737 1943 2105

Commercial Filters LACRON SUREFLOW HZC - SAND FILTER 2.5 Bar pressure rating Part No. Product Description Nom. Size Filter Only 222942413 HZC - 42 4” (110mm) Connections 42” - 1100mm

Filter model HZC-42

Model HZC-42

Tank Diameter

Bed Depth Filter Area Valve Size

Pea Gravel

Sand

(m ) 2.000

(kg) 250

(kg) 950

(mm) 1100

A 330

B 400

(mm) 650

C 660

D 1265

2

E 1335

(inch/mm) 4 / 110

F 190

G 815

H 430

I 800

J 1980

K 2030

Zeoplus Glass (kg) 800

L M 310 1120

LACRON SUREFLOW LSC - SIDE MOUNT SAND FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size Filter Tank with Connecting Unions Only 222036 LSC - 36 2” (63mm) Connections 36” - 915mm 222037 LSC - 36 3” (90mm) Connections 36” - 915mm 222042 LSC - 42 3” (90mm) Connections 42” - 1100mm 222048 LSC - 48 3” (90mm) Connections 48” - 1200mm

Filter model

Tank Diameter

Bed Depth

Filter Area

(mm) 900 900 1100 1200

(mm) 500 500 550 700

(m2) 0.660 0.660 0.970 1.130

LSC-36 LSC-36-3 LSC-42 LSC-48 Model LSC-36 LSC-42 LSC-48

A 128 128 128

B 915 1100 1200

C 945 1130 1240

49

D E F G 230 110 300 300 230 110 325 350 430 110 559 360

Valve Size Pea Gravel (mm/inch) 63 / 2 90 / 3 90 / 3 90 / 3 H 945 965 1315

(kg) 75 75 100 175 I 90 95 100

J 90 90 90

Sand (kg) 300 300 450 675 K 945 965 1200

Zeoplus Glass (kg) 225 225 350 525 L 1385 1570 1660

M n/a n/a 430

Price € 7,707.93

Max. Flow (m3/hr) 90

N 195

X 660

Price € 1,787.77 € 2,284.06 € 3,073.53 € 4,610.30

Max. Flow (m3/hr) 26/31 26/31 43 56 N n/a n/a 330

X 500 550 700

Commercial Filters LACRON FINAFLOW MBF - MEDIUM BED SAND FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Side Hatch, Sight Glass & Connecting Unions 2220588 MBF - 24 1½” (50mm) Connections 24” - 610mm 2220598 MBF - 30 2” (63mm) Connections 30” - 760mm Filter model MBF-24 MBF-30 Model MBF-24 MBF-30

Tank Diameter

Bed Depth

Filter Area

Valve Size

Pea Gravel

Sand

(mm) 610 760

(mm) 1000 1000

(m ) 0.300 0.450

(mm / inch) 50 / 1½ 63 / 2

(kg) 75 100

(kg) 350 550

A 230 230

B 625 780

C 204 214

2

D 796 786

E 456 460

F 1505 1500

G 85 110

H 595 740

I 120 120

Price € 1,910.64 € 2,426.70

Zeoplus Glass (kg) 280 440 J 1085 1110

Max. Flow (m3/hr) 15 22.5 K 640 645

LACRON FINAFLOW DBF - DEEP BED SAND FILTER - 2.5 Bar pressure rating Part No. Product Description Nom. Size With Side Hatch, Sight Glass & Connecting Unions 222041618 DBF - 18 1½” (50mm) Connections * 18” - 450mm 222041624 DBF - 24 2” (63mm) Connections 24” - 610mm 222041630 DBF - 30 2” (63mm) Connections 30” - 760mm 222041636 DBF - 36 3” (90mm) Connections 36” - 915mm 222041642 DBF - 42 3” (90mm) Connections 42” - 1100mm TBA DBF - 48 3” (90mm) Connections 48” - 1200mm

L 1000 1000

Price € 2,163.52 € 3,380.89 € 4,369.23 € 5,249.11 € 5,984.34 € 6,465.35

* Side Hatch and Sight Glass not available on DBF-18 Filter model DBF-18 DBF-24 DBF-30 DBF-36 DBF-42 DBF-48 Model DBF-18 DBF-24 DBF-30 DBF-36 DBF-42 DBF-48

Tank Diameter

Bed Depth

Filter Area

Valve Size

Pea Gravel

Sand

(mm) 460 610 760 915 1100 1200

(mm) 1220 1300 1525 1550 1580 1585

(m2) 0.166 0.300 0.450 0.660 0.970 1.130

(mm / inch) 50 / 1½ 63 / 2 63 / 2 90 / 3 90 / 3 90 / 3

(kg) 50 75 100 150 150 200

(kg) 250 500 775 950 1650 2400

A 230 230 230 230 230 430

B 475 625 780 948 1130 1240

C 260 260 275 300 300 350

D 1175 1250 1350 1375 1400 1500

E 1600 1750 1860 1900 1985 2150

F 1625 1775 1910 1960 2010 2250

G 75 80 95 90 105 125

H 260 275 295 300 325 350

I 380 500 710 745 1050 1200

Zeoplus Glass (kg) 200 400 625 750 1400 2050 J 75 80 85 90 90 100

LACRON FINAFLOW HPF - (HIGH PRESSURE) DEEP BED SAND FILTER 4.0 Bar Part No. Product Description Nom. Size Pressure rating With Connecting Unions 22201863 HPF - 18 1½” (50mm) Connections 18” - 450mm 22202463 HPF - 24 2” (63mm) Connections 24” - 610mm 22203063 HPF - 30 2” (63mm) Connections 30” - 760mm 22204263 HPF - 42 3” (90mm) Connections 42” - 1100mm

Filter model HPF-18 HPF-24 HPF-30 HPF-42 Model HPF-18 HPF-24 HPF-30 HPF-42

Tank Diameter

Bed Depth

Filter Area

Valve Size

Pea Gravel

Sand

(mm) 460 610 760 1100

(mm) 1220 1300 1525 1580

(m2) 0.166 0.300 0.450 0.97

(mm / inch) 50 / 1½ 63 / 2 63 / 2 90 / 3

(kg) 50 75 100 200

(kg) 250 500 950 1625

A 230 230 230 230

B 475 625 780 1130

C 260 260 275 300

50

D 1175 1170 1350 1985

E 1600 1650 1870 1985

F 1625 1775 1910 2010

G 75 80 95 90

H 260 270 295 325

I 380 500 710 1050

Zeoplus Glass (kg) 200 425 800 1400 J 75 80 85 90

Max. Flow (m3/hr) 8.5 15 22.5 33 48.5 56.5 X 1220 1300 1525 1550 1580 1585

Price € 2,240.93 € 2,898.45 € 3,855.81 € 5,611.11

Max. Flow (m3/hr) 8.5 15 22.5 43 X 1220 1300 1525 1580

Commercial Filters LACRON HI FLOW LCX - COMMERCIAL SAND FILTER 2.5 Bar pressure rating Part No. Product Description Nom. Size With Side Hatch, Sight Glass & PVC Laterals 22291200808 LCX - 1200 3” (90mm) Connections 48” - 1200mm 222914001008 LCX - 1400 4” (110mm) Connections 55” - 1400mm 222916001008 LCX - 1600 4” (110mm) Connections 63” - 1600mm 222918001507 LCX - 1800 6” (160mm) Connections 72” - 1850mm 222920001508 LCX - 2000 6” (160mm) Connections 79” - 2000mm 222923501508 LCX - 2350 6” (160mm) Connections 96” - 2350mm

Filter model LCX-1200 LCX-1400 LCX-1600 LCX-1800 LCX-2000 LCX-2350

Model LCX-1200 LCX-1400 LCX-1600 LCX-1800 LCX-2000 LCX-2350

Tank Diameter (mm) 1230 1430 1630 1880 2030 2350

A 430 430 430 430 430 600

B 1200 1400 1600 1800 2000 2350

Bed Depth (mm) 1200 1200 1200 1200 1200 1200

C 1230 1430 1630 1830 2030 2380

Filter Area (m2) 1.13 1.54 2.01 2.70 3.14 4.34

D 330 330 330 330 330 460

E 700 700 700 700 700 600

Valve Size (mm/inch) 90 / 3 110 / 4 110 / 4 160 / 6 160 / 6 160 / 6

F 749 814 829 789 789 950

G 2000 2000 2100 2100 2150 2150

Pea Gravel (kg) 300 500 750 850 1150 2600

H 2243 2313 2285 2260 2398 2435

I 125 150 175 200 225 250

Price € 7,213.76 € 8,792.71 € 10,564.51 € 14,120.16 € 16,868.26 € 20,435.97

Sand (kg) 1675 2300 3000 3800 4600 6300

Max. flow (m3/hr) 51 70 90 121 141 195

J 1045 1202 1202 1755 1755 2037

K 1300 1500 1700 1925 2125 2425

LACRON HI FLOW LCP - COMMERCIAL SAND FILTER 2.5 Bar pressure rating Part No. Product Description Nom. Size With Side Hatch, Sight Glass & Nozzle Plate 222912008017 LCP - 1200 3” (90mm) Connections 48” - 1200mm 2229140010017 LCP - 1400 4” (110mm) Connections 55” - 1400mm 2229160010017 LCP - 1600 4” (110mm) Connections 63” - 1600mm 2229180015017 LCP - 1800 6” (160mm) Connections 72” - 1850mm 2229200015017 LCP - 2000 6” (160mm) Connections 79” - 2000mm 2229235015017 LCP - 2350 6” (160mm) Connections 96” - 2350mm

Filter model LCP-1200 LCP-1400 LCP-1600 LCP-1800 LCP-2000 LCP-2350 Model LCP-1200 LCP-1400 LCP-1600 LCP-1800 LCP-2000 LCP-2350

Tank Diameter Bed Depth Filter Area (mm) 1230 1430 1630 1880 2030 2380 A 430 430 430 430 430 600

(m ) 1.13 1.54 2.01 2.70 3.14 4.34

(mm) 1200 1200 1200 1200 1200 1200 B 1200 1400 1600 1800 2000 2350

51

C 1230 1430 1630 1880 2030 2380

2

D 330 330 330 330 330 460

E 600 600 600 600 600 600

Valve Size

Pea Gravel

Sand

(mm/inch) 90 / 3 110 / 4 110 / 4 160 / 6 160 / 6 160 / 6

(kg) 200 300 450 650 900 1500

(kg) 1500 2100 2600 3300 4000 6300

F 749 814 829 789 789 950

G 2000 2000 2100 2100 2150 2150

H 2243 2313 2285 2260 2398 2435

I 125 150 175 200 225 250

Price € 8,419.06 € 10,600.67 € 12,975.12 € 17,133.43 € 20,484.18 € 25,305.41

Zeoplus Glass (kg) 1275 1800 2200 2800 3400 5350 J 1045 1202 1202 1755 1755 2037

X 1200 1200 1200 1200 1200 1200

Max. Flow

K 1300 1500 1700 1925 2125 2425

(m3/hr) 57 77 100 135 157 217 X 1200 1200 1200 1200 1200 1200

Commercial Filters SINGLE FILTER 5 VALVE BATTERY SETS Part No. Product Description 72859 5 Valve Pipework Set - Self Assembly 72862 5 Valve Pipework Set - Self Assembly 72860 5 Valve Pipework Set - Self Assembly 72864 5 Valve Pipework Set - Self Assembly 72863 5 Valve Pipework Set - Self Assembly 72861 5 Valve Pipework Set - Self Assembly

Nom. Size 3” 4” 6” 90mm 110mm 160mm

Price € 2,103.80 € 2,695.13 € 3,508.04 € 2,103.80 € 2,695.13 € 3,508.04

All 5 valve batteries come complete with butterfly valves, tees, elbows pipework and 2 pipe supports Note: Supplied loose in kit form.

DOUBLE FILTER 5 VALVE BATTERY SETS Part No. Product Description 72859DF 5 Valve Pipework Set - Self Assembly 72862DF 5 Valve Pipework Set - Self Assembly 72860DF 5 Valve Pipework Set - Self Assembly 72864DF 5 Valve Pipework Set - Self Assembly 72863DF 5 Valve Pipework Set - Self Assembly 72861DF 5 Valve Pipework Set - Self Assembly

Nom. Size 3” 4” 6” 90mm 110mm 160mm

Price € 2,523.23 € 3,234.17 € 4,195.68 € 2,523.23 € 3,234.17 € 4,195.68

5 Valve Battery

All double filter 5 valve Battery sets come complete with butterfly valves, tees, elbows, pipework and 3 pipe supports.

Note: Supplied loose in kit form.

Single Filter 5 Valve Battery

Double Filter 5 Valve Battery

Mounted sight glass Part No. Product Description SPXSG300 Mounted sight glass SPXSG400 Mounted sight glass SPXSG600 Mounted sight glass SPXSG90 Mounted sight glass SPXSG110 Mounted sight glass SPXSG160 Mounted sight glass

52

Nom. Size 3” 4” 6” 90mm 110mm 160mm

Price € 160.04 € 167.84 € 311.48 € 160.04 € 167.84 € 311.48

Commercial Filters Hydro Commercial Strainer Part No. Product Description 2409058 Hydro Commercial Strainer - Flanged 2409057 Hydro Commercial Strainer - Flanged 2408054 Hydro Commercial Strainer - Quick Connect/Flange

Inlet / Outlet 6” / 6” 4” / 6” 4” (110mm) / 6”

Price € 562.70 € 546.31 € 535.39

603mm

Clear polycarbonate strainer lid enables an instant view of the strainer basket.

New lock ring with easy grip handles - no tools required for simple removal & replacement of the lid.

521.7mm

Flanged / union connections Moulded 16L polypropylene basket.

520mm

Hydro COMMERCIAL STRAINER FLANGE ASSEMBLY KITS Part No. Product Description ZZGP600FK 6” Flange Assembly Kit ZZGP400FK 4” Flange Assembly Kit ZZGP160FK 160mm Flange Assembly Kit ZZGP110FK 110mm Flange Assembly Kit

Nominal Size 6” 4” 160mm 110mm

Price € 262.42 € 204.79 € 222.57 € 189.01

Note: Flange Assembly Kits Include:

1 x Backing Ring, 1 x Stub Flange, 1 x Stub Gasket, 8 x bolts, 8 x Nuts and 16 x Washers

PRESSURE GAUGE PANELS Part No. Product Description W22345 Dual Pressure Gauge

WATERCO COMMERCIAL 4 Bar 6 WAY MULTIPORT VALVES Part No. Product Description All valves come complete with quick connect unions, pressure gauge & air relief valve.

Side Mount 2290504 2½”/75mm Side Mount MPV only 22905040 2½”/75mm Side Mount MPV c/w plumbing kit 2290900 3”/90mm Side Mount MPV only 2290905 3”/90mm Side Mount MPV c/w plumbing kit 2291100 4”/110mm Side Mount MPV only

53

Price € 239.42

Nom. Size

Price

2½”/75mm 2½”/75mm 3”/90mm 3”/90mm 4”/110mm

€ 289.27 € 373.64 € 548.41 € 705.10 € 1,108.88

Commercial Filters Tee fitting—PVC-U Part No. Product Description GP300ET 90° Tee - imperial SPX090ET 90° Tee - metric GP400ET 90° Tee - imperial SPX110ET 90° Tee - metric GP600ET 90° Tee - imperial SPX160ET 90° Tee - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 26.20 € 20.48 € 45.26 € 30.40 € 201.45 € 89.03

90° Elbow fitting—PVC-U Part No. Product Description GP30090 90° Elbow - imperial SPX09090 90° Elbow - metric GP40090 90° Elbow - imperial SPX11090 90° Elbow - metric GP60090 90° Elbow - imperial SPX16090 90° Elbow - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 17.94 € 12.50 € 31.70 € 23.54 € 108.44 € 69.88

45° Elbow fitting—PVC-U Part No. Product Description GP30045 45° Elbow - imperial SPX09045 45° Elbow - metric GP40045 45° Elbow - imperial SPX11045 45° Elbow - metric GP60045 45° Elbow - imperial SPX16045 45° Elbow - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 20.40 € 12.46 € 34.88 € 21.23 € 126.91 € 60.64

Socket fitting—PVC-U Part No. Product Description GP300PS Socket - imperial SPX090SP Socket - metric GP400PS Socket - imperial SPX110SP Socket - metric GP400PS Socket - imperial SPX160SP Socket - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 10.34 € 8.20 € 15.16 € 13.52 € 63.46 € 42.84

Nom. Size 3” x 90mm 4” x 110mm 6” x 160mm

Price € 23.86 € 32.93 € 83.44

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 11.73 € 9.64 € 18.08 € 19.47 € 66.27 € 41.09

Nom. Size 3” 90mm X 3” 4” 110mm X 4”

Price € 12.46 € 15.68 € 27.58 € 23.80

Adaptor Socket fitting—PVC-U Part No. Product Description GP300SA Adaptor Socket GP400SA Adaptor Socket GP600SA Adaptor Socket Cap fitting—PVC-U Part No. Product Description GP300PC Cap - imperial SPX090PC Cap - metric GP400PC Cap - imperial SPX110PC Cap - metric GP600PC Cap - imperial SPX160PC Cap - metric Plain socket x BSP Female thread fitting—PVC-U Part No. Product Description GP300FA Socket - imperial SPX090300FA Socket - metric GP400FA Socket - imperial SPX110400FA Socket - metric

54

Commercial Filters Union fitting—PVC-U Part No. Product Description GP300SU Union - imperial SPX090SU Union - metric GP400SU Union - imperial SPX090SU Union - metric

Nom. Size 3” 90mm 4” 110mm

Price € 48.20 € 35.98 € 99.26 € 52.61

Stub Flange fitting—PVC-U Part No. Product Description GP300SFO Stub Flange - imperial SPX090SF Stub Flange - metric GP400SFO Stub Flange - imperial SPX110SF Stub Flange - metric GP600SFO Stub Flange - imperial SPX160SF Stub Flange - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 17.06 € 7.61 € 22.95 € 9.40 € 56.74 € 22.38

Nom. Size 3” X 1.5” 3” x 2” 3” x 2.5” 90mm x 75mm 4” x 2” 4” x 3” 110mm x 90mm 6” X 4” 160mm x 140mm

Price € 11.70 € 14.90 € 14.57 € 4.88 € 17.75 € 17.94 € 8.76 € 60.78 € 21.25

Stub Gasket fitting—PVC-U Part No. Product Description GP300SG Stub Gasket - imperial SPX090SG Stub Gasket - metric GP400SG Stub Gasket - imperial SPX110SG Stub Gasket - metric GP600SG Stub Gasket - imperial SPX160SG Stub Gasket - metric

Nom. Size 3” 90mm 4” 110mm 6” 160mm

Price € 3.46 € 2.92 € 5.11 € 4.17 € 7.45 € 6.57

Double union ball valve Part No. Product Description GP300BV Double Union Ball Valve - imperial SPX090DBV Double Union Ball Valve - metric

Nom. Size 3” 90mm

Price € 234.41 € 217.77

Fully Flanged Butterfly Valve Standard (with ratcheted handle) Part No. Product Description Nom. Size GP300FV Fully Flanged Butterfly Valve - imperial 3” SPX090BV Fully Flanged Butterfly Valve - metric 90mm GP400FV Fully Flanged Butterfly Valve - imperial 4” SPX110BV Fully Flanged Butterfly Valve - metric 110mm GP600FV Fully Flanged Butterfly Valve - imperial 6” SPX160BV Fully Flanged Butterfly Valve - metric 160mm

Price € 226.25 € 220.89 € 258.38 € 246.20 € 468.56 € 428.40

PRESSURE PIPE Part No. Product Description GP300CP6 6m length pipe SPX090PP5 5m length pipe GP400CP6 6m length pipe SPX110PP5 5m length pipe GP600CP6 6m length pipe SPX160PP5 5m length pipe

Price € 100.41 € 72.24 € 157.97 € 113.31 € 341.92 € 236.96

Reducing Bush fitting—PVC-U Part No. Product Description GP300112RB Reducing Bush - imperial GP300200RB Reducing Bush - imperial GP300212RB Reducing Bush - imperial SPX090075RB Reducing Bush - metric GP400200RB Reducing Bush - imperial GP400300RB Reducing Bush - imperial SPX110090RB Reducing Bush - metric GP600400RB Reducing Bush - imperial SPX160140RB Reducing Bush - metric

55

Nom. Size 3” 90mm 4” 110mm 6” 160mm

56 Waterco Media

www.waterco.eu

Media 57

www.waterco.eu

Waterco Media

Media Waterco Glass Media Part No. Product Description 2264 Grade 1 2266 Grade 3

Nom. Size 25kg bag 25kg bag

Price € 44.46 € 44.46

Grade 1 equivalent to 16/30 Grade sand Waterco Glass media has the green credentials, and with its superior performance is also cost effective in comparison to sand.

Grade 3 equivalent to 6mm gravel

Waterco Glass media has many benefits over sand:

• Waterco Glass media is more efficient It removes 30% more material and pollutants than sand, so saving on backwashing and the resultant water, energy and chemical treatment costs • Waterco Glass media keeps cleaner

It is less susceptible to bio-fouling. As the product is heat treated surfaces are smooth, so requiring less remedial action and again less chemical treatment to kill pollutants

S av e t i m e , wat e r a n d e n e r g y.

• Waterco Glass media requires less material It is less dense than sand, requiring 20% less media to fill the equivalent filter • Waterco Glass media doesn’t degrade It therefore has a longer life span • Waterco Glass media Is suitable for both commercial and domestic applications

ZEOCLERE Part No. 2261C

Product Description Lacronite (Zeoclear) media

Nom. Size 20kg Bag

Price € 54.98

Zeoclere filter media produces a water clarity 60% better than that of conventional sand. It’s ideally suited for private, commercial and hydrotherapy pools & spas and helps reduce filter maintenance and water consumption.

THE FILTRATION PROCESS Sieving

Depth Filtration

Adsorption

Particles larger than the spaces between the grains of the filter media are blocked at the surface of the filter bed.

Most of the filtration occurs within the filter bed. The gaps between the filter media form tortuous paths trapping small particles.

A filter’s ability to remove fine particles is also due to the adsorption of the filter media - that is when particles adhere to the surface of the filter media.

Zeoplus is a filter media with enhanced adsorption capabilities.

S av e t i m e , wat e r a n d e n e r g y.

Incoming Water

Filtered Water

Reduce Ammonia - Reduces the odour of chloramines commonly associated

with chlorinated water.

Soften Water

- Reduces formation of scales on hot water system.

Reduce Iron

- Reduces staining of sanitary wares and clothing.

Elevate the pH of - Reduces the formation of rust in iron pipes.

Mildly Acidic Water

58

Media

Glass pearls Waterco Glass PEARLS Media Part No. Product Description 35320011 Grade 1 Glass Pearls Media 1 0.6mm - 1.2mm 2269 Grade 1 Glass Pearls Media 1 0.6mm - 1.2mm

Nom. Size 20Kg 25kg

Price € 50.92 € 60.84

Manufactured from 100% virgin glass, Waterco glass pearls are a new generation of filter media, capable of providing water of superior clarity and requiring less water for backwashing.

S av e t i m e , wat e r a n d e n e r g y.

Superior Clarity Grade 1 Glass Pearls have a small effective size of only 0.6mm to 0.8mm. Its narrow particle size range allows in-depth filtration and extends operating cycles between backwashing. Glass Pearls have been laboratory tested to be able to effectively filter down to below 3 microns.

Safe and Smooth Glass Pearls are spherical and do not have any sharp edges. They are safe to handle and safe to service. If there is ever a failure of the filter’ s laterals and glass beads flow into the swimming pool, they pose no risk of injury to swimmers.

High Purity Waterco Glass Pearls are manufactured from 100% virgin glass and chemically inert. Waterco Glass Pearls have been independently lab tested for leeching contaminants and found to be well within Australian Drinking Water Guidelines.

Save Water Glass Pearl’s spherical smooth shape, results in a low co efficient of friction, reducing its backwash water requirements. Glass Pearls backwashes with up to 20% less water than sand, saving time and water.

Time Saving Glass Pearls are easy to install and enables a rapid start up of the media filter. Its high purity means very little backwashing is required to cleanse the filter media, prior to commissioning the filter.

59

60 Waterco Pumps

www.waterco.eu

Pumps 61

www.waterco.com www.waterco.eu

Waterco Pumps

Pumps

SECONDARY SEAL PUMPS

Secondary

Protection

Seal Situated between the pump wet end & the pump motor, a mechanical seal forms a seal around the motor shaft to prevent water from running out along the shaft of the motor. The mechanical seal is the wearing part of any pool pump, if the pump is ever run dry or simply worn out. If a leaking mechanical seal is not replaced promptly, water will travel up the shaft of the motor and ruin the motor in a very short period of time. Waterco’s patented Secondary Seal technology protects the pump motor’s end shield from any water contact, by capturing any leaks through a worn out mechanical seal and draining it out of the pump.

62

Pumps WATERCO AQUAMITE PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max 1½” port supplied with 1½” imperial & 50mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

2402033AEUM Aquamite 033 11.3m³/hr 0.53kW 2402050AEUM Aquamite 050 14.4m³/hr 0.58kW 2402075AEUM Aquamite 075 16.8m³/hr 0.65kW 2402100AEUM Aquamite 100 19.8m³/hr 0.76kW 2402125AEUM Aquamite 125 22.2m³/hr 0.88kW Price and availability for TUV approved models available on request Silicon carbide seal required for salt water installations, pricing available on request Flow Curve

Price

€ 367.62 € 385.70 € 399.33 € 430.05 € 433.91

Noise Curve

Aquamite Sound Levels

16

66

14

65 64

12

100

63

Noise(dBA)

Head (m)

10

8

6

75

62 61

125

50

60

4

59

Aquamite 100 Aquamite 125 2 Aquamite 33

Aquamite 50

58

Aquamite 75

0

5

10

33

57

0 15

20

25

Flow (m3/hr)

0

5

10

15

20

25

Flow Rate (m3/hr)

Specifications Model

HP

2402033 2402050 2402075 2402100 2402125

0.33 0.50 0.75 1.00 1.25

Phase 1

Pmax kW 0.53 0.58 0.65 0.76 0.88

Amps

Phase

2.3 2.50 3.00 3.33 3.90

1 1 1 1 1

Volts 220 - 240

Total Length 497 497 497 520 520 Cycle 50

Motor Frame 63 63 63 71 71

Flow Rate Qmax.

11.3m3/hr 14.4m3/hr 16.8m3/hr 19.8m3/hr 22.2m3/hr RPM 2860

The Aquamite is a compact pump ideal for domestic swimming pools and small recirculation systems including ponds and water features.

Secondary

Protection

Seal

63

Pumps WATERCO LACRONITE PUMPS—Single phase 220v—240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max 1½” port supplied with 1½” imperial & 50mm metric quick connect unions and internal threaded connections.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

24070050 Lacronite 0.5HP 0.61kW 24070075 Lacronite 0.75HP 0.78kW 24070100 Lacronite 1HP 0.96kW 24070125 Lacronite 1.25HP 1.10kW 24070150 Lacronite 1.5HP 1.50kW Price and availability for TUV approved models available on request Silicon Carbide seal required for salt water applications, pricing available on request.

Price

€ 590.16 € 616.04 € 661.34 € 699.98 € 727.48

The Lacronite pump is ideal for large domestic swimming pools with ancillary systems such as heating, in-floor cleaning, fountains, vacuum cleaning and swim jets.

Noise Curve Larconite Noise Curve 2012 75

20

70

15

65

Noise Level dB

Total Head (m)

Flow Curve Larconite Pump Performance Chart 25

10

200

150 125 100 75

60

50 55

5

100

50 75

0 0

5

10

15

200

150

125

50

20

0

30

25

5

10

15

Laconrite 050

5" BSPT INTERNAL THREADS AVAILABLE (BOTH PORTS)

Laconrite 075

Laconrite 100

Laconrite 125

20

30

25

Flow (m3/hr)

Flow (m3/hr) Laconrite 150

Laconrite 050

Laconrite 150

Laconrite 075

Laconrite 100

Laconrite 125

Laconrite 150

Laconrite 150

Direct replacement for the STARITE 5P2R and the Hayward Super Pump NO alteration of plumbing required Flow rate m³/hr Model

Nominal Power

Motor input

(hp)

(kW)

Amps

Total Length

Total Width

Total High

(mm)

(mm)

(mm)

Pump Rating

8m

10m

Lacronite 50

8

6

0.50

0.61

3.2

609

226.6

381.4

IPX4

Lacronite 75

9

8

0.75

0.78

3.7

609

226.6

381.4

IPX4

Lacronite 100

14

12

1.00

0.96

4.3

609

226.6

381.4

IPX4

Lacronite 125

15

14

1.25

1.10

4.9

609

226.6

381.4

IPX4

Lacronite 150

19

17

1.50

1.38

6.2

629

226.6

381.4

IPX4

Phase 1

Volts 220 - 240

Cycle 50

DIMENSION 'A'

1.2

609

1.5

629

629 226.6

274.9

226.6 Total Length

381.4

609

381.4

228 *

274.9

1.2 2860 1.5

DIMENSION 'A'

228 *

1.5" BSPT INTERNAL THREADS AVAILABLE (BOTH PORTS)

MOTOR HP

MOTOR HP RPM

64

Pumps WATERCO LACRONITE ECO PUMPS—Single phase 220v—240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½” port supplied with 1½” imperial & 50mm metric quick connect unions and internal threaded connections.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

240701005 Lacronite ECO 1HP 0.96kW € 1,278.81 240701009 Lacronite ECO vs 1HP 0.96kW € 1,388.79 Price and availability for TUV approved models available on request Silicon Carbide seal required for salt water applications, pricing available on request.

ECO

The Lacronite ECO pump is ideal for large domestic swimming pools with ancillary systems such as heating, in-floor cleaning, fountains, vacuum cleaning and swim jets.

Flow Curve

Noise Curve

Lacronite ECO 100V QH

Lacronite ECO 100V Q vs Sound Pressure Level (dBA)

20

66

18

65

100V High 16

64

Sound Pressure Level (dBA)

Total Head (m)

14 12 10 8 6

63

100V Medium

62 61 60

100V Low 59

4 2

100V Low

0 0

2

4

6

8

10

12

14

58

100V High

100V Medium 16

20

18

Flow (m3/hr)

57 0

2

4

6

8

10

12

16

18

20

Flow (m3/hr)

Direct replacement for the STARITE 5P2R and the Hayward Super Pump NO alteration of plumbing required Flow rate m³/hr Model

Lacronite 100ECO

8m

10m

14

12

Nominal Power

Motor input

(hp)

(kW)

1.00

0.87

Phase

Volts

Cycle

1

220 - 240

50

S av e t i m e , wat e r a n d e n e r g y.

1.5" BSPT INTERNAL THREADS AVAILABLE (BOTH PORTS)

DIMENSION 'A'

1.2

609

1.5

629

Total High

(mm)

(mm)

(mm)

633

226.6

381.4

Total Length

65

Pump Rating

IPX5

RPM 1900 (Low) 2410 (Medium) 2850 (High) MOTOR HP

DIMENSION 'A'

1.2

609

1.5

629 226.6

381.4

226.6

381.4

Total Width

274.9

228 *

274.9

6.4

Total Length

228 *

1.5" BSPT INTERNAL THREADS AVAILABLE (BOTH PORTS)

MOTOR HP

Amps

22

Pumps WATERCO SUPASTREAM PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 1½” port supplied with 1½” imperial & 50mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal. € 433.91 2403050EUM Supastream 050 14.4m³/hr 0.57kW € 448.48 2403075EUM Supastream 075 16.8m³/hr 0.61kW `2403100EUM Supastream 100 € 470.07 20.4m³/hr 0.82kW € 482.12 2403125EUM Supastream 125 23.4m³/hr 0.88kW € 518.28 2403150EUM Supastream 150 24.9m³/hr 1.09kW Price and availability for TUV approved models available on request All models also available with 2”/63mm ports - pricing and availability on request.

Supastream pumps are general purpose units designed for use in swimming pools and low pressure water recirculation applications.

WATERCO SUPASTREAM PUMPS - Three Phase 380v - 415v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max 1½” port supplied with 1½” imperial & 50mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

24030503EUM Supastream 050 14.4m³/hr 0.59kW 24030753EUM Supastream 075 16.8m³/hr 0.59kW 24031003EUM Supastream 100 20.4m³/hr 0.82kW 24031253EUM Supastream 125 23.4m³/hr 0.83kW 24031503EUM Supastream 150 24.9m³/hr 1.09kW Price and availability for TUV approved models available on request All models also available with 2”/63mm ports - pricing and availability on request.

Flow Curve

Price

€ 433.91 € 448.48 € 470.07 € 482.12 € 518.28

Supastream Sound Levels Noise Curve 67

16

100 66

14

65

12

75

64

150

Noise( dBA)

Head (m)

10

8

63

62

6

61 Supastream 150

4 Supastream 100

60

Supastream 125

2 Supastream 50

Supastream 75

50

0 0

5

10

15

125

59

20

25

30

58 0

Flow Rate (m3/hr)

5

10

15

20

25

Flow Rate (m3/hr)

TOTAL LENGTH

308

159

217

324 282

Model

HP

2403050 24030503 2403075 24030753 2403100 2403125 24031253 2403150 24031503

0.50 0.50 0.75 0.75 1.00 1.25 1.25 1.50 1.50

Phase 1 3

Pmax kW 0.57 0.59 0.61 0.59 0.82 0.88 0.83 1.09 1.06

Amps

Phase

2.5 1.3 2.8 1.2 3.6 3.9 1.9 4.9 2.1

1 3 1 3 1&3 1 3 1 3

Volts 220 - 240 380 - 415

Total Length 524 524 536 536 559 559 559 580 580 Cycle 50 50

Motor Frame 63 63 71 71 71 71 71 80 80

Flow Rate Qmax.

14.4m3/hr 14.4m3/hr 16.8m3/hr 16.8m3/hr 20.4m3/hr 23.4m3/hr 23.4m3/hr 24.9m3/hr 24.9m3/hr RPM 2860 2860

Secondary

Protection

Seal

66

Pumps WATERCO SUPATUF PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max 2” port supplied with 2” imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal 241050EUM Supatuf 050 14.5m³/hr 0.54kW 241075EUM Supatuf 075 16.7m³/hr 0.63kW 241100EUM Supatuf 100 21.8m³/hr 0.84kW 241125EUM Supatuf 125 24.9m³/hr 0.96kW 241150EUM Supatuf 150 27.4m³/hr 1.15kW 241200EUM Supatuf 200 33.2m³/hr 1.50kW 241250EUM Supatuf 250 35.8m³/hr 1.81kW 241300EUM Supatuf 300 37.1m³/hr 2.06kW Price and availability for TUV approved models available on request

The Supatuf is ideal for large domestic swimming pools with ancillary systems.

WATERCO SUPATUF PUMPS - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max 2” port supplied with 2” imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal 2410503EUM Supatuf 050 14.5m³/hr 0.49kW 2410753EUM Supatuf 075 16.7m³/hr 0.60kW 2411003EUM Supatuf 100 21.8m³/hr 0.86kW 2411253EUM Supatuf 125 24.9m³/hr 1.01kW 2411503EUM Supatuf 150 27.4m³/hr 1.09kW 2412003EUM Supatuf 200 33.2m³/hr 1.43kW 2412503EUM Supatuf 250 35.8m³/hr 1.73kW 2413003EUM Supatuf 300 37.1m³/hr 1.99kW Price and availability for TUV approved models available on request

€ 589.70 € 603.00 € 625.70 € 649.11 € 672.70 € 719.52 € 766.52 € 821.14

Price

€ 589.70 € 603.00 € 625.70 € 649.11 € 672.70 € 719.52 € 743.11 € 789.93

Noise Curve

Flow Curve 78

16

76

14

72

Sound Pressure Level (dBA)

18

12 Total Head (m)

Price

10

300

8 250 6

250 300 100

70

75

200

68

150

66

125

64

200 4 75

2

100

62

150

125

50

60

50

58

0 0

5

10

15

20

25

30

35

40

0

45

5

10

15

20

Flow (m3/hr)

25

30

35

Flow (m3/hr)

Secondary

Protection

Model

HP

Pmax kW

241050 2410503 241075 2410753 241100 2411003 241125 2411253 241150 2411503 241200 2412003 241250 2412503 241300 2413003

0.50 0.50 0.75 0.75 1.00 1.00 1.25 1.25 1.50 1.50 2.00 2.00 2.50 2.50 3.00 3.00

0.54 0.49 0.63 0.60 0.84 0.86 0.96 1.01 1.15 1.09 1.50 1.43 1.81 1.73 2.06 1.99

Phase 1 3

Seal

67

Amps Phase 2.4 1.2 2.9 1.2 3.70 1.9 4.20 2.0 5.30 2.1 7.20 2.6 8.50 3.6 9.7 3.7

Volts 220 - 240 380 - 415

1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3

Total Motor Frame Length 556 63 556 63 587 71 587 71 587 71 587 71 587 71 587 71 608 80 608 80 629 80 629 80 653 90 653 90 670 90 670 90 Cycle 50 50

Flow Rate Qmax.

14.5m3/hr 14.5m3/hr 16.7m3/hr 16.7m3/hr 21.8m3/hr 21.8m3/hr 24.9m3/hr 24.9m3/hr 27.4m3/hr 27.4m3/hr 33.2m3/hr 33.2m3/hr 35.8m3/hr 35.8m3/hr 37.1m3/hr 37.1m3/hr RPM 2860 2860

40

Pumps WATERCO TURBOFLO PUMPS - Single Phase 220v - 240v, Three phase 380v - 415v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max Price 2” port supplied with 2” and 63mm quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

2462100EUM TurboFlo 100 21.36m³/hr 0.94kW € 560.47 2462125EUM TurboFlo 125 22.44m³/hr 1.05kW € 578.55 2462150EUM TurboFlo 150 27.06m³/hr 1.40kW € 614.71 2462200EUM TurboFlo 200 29.04m³/hr 1.50kW € 656.89 2462250EUM TurboFlo 250 33.30m³/hr 1.70kW € 699.08 2462300EUM TurboFlo 300 40.02m³/hr 2.11kW € 783.45 2462400EUM TurboFlo 400 (three phase) 45.36m³/hr 3.10kW € 872.06

Adjustable wet end

TurboFlo is a hydraulically efficient, high performance pump designed for pools and spas with high power requirements.

It has an adjustable wet end which can be configured to suit up to 5 different plumbing conditions.

The outlet port of the TurboFlo can be configured to suit different plumbing conditions.

Multiple port configurations (5 different positions available).

Flow Curves 25

15

Specifications

400

10

300 5

100

125 150

200

250

0 0

5

10

15

20

25

30

35

40

45

50

Flow Rate (m3/hr)

Noise Curve 72

200

400

250 300 150

64

Nominal Power (hP)

Motor Input (kW)

Amps

Total Length (mm)

Motor Frame (mm)

Inlet/Outlet

TurboFlo 100

1.00

0.94

4.1

416

71

2”/63mm

TurboFlo 125

1.25

1.05

4.5

416

71

2”/63mm

TurboFlo 150

1.50

1.40

5.9

445

80

2”/63mm

TurboFlo 200

2.00

1.50

6.4

445

80

2”/63mm

TurboFlo 250

2.50

1.70

7.2

445

80

2”/63mm

TurboFlo 300

3.00

2.10

9.1

483

90

2”/63mm

TurboFlo 400

4.00

3.10

5.7

508

100

2”/63mm

Phase 1 3

125 60

0

6

12

18

24

30

Flow (m³/hr)

36

42

48

Volts 220- 240 308-415

Cycle 50 50

RPM 2860 2900

54

Dimensions

225.1

56

100

TOTAL LENGTH 241 80 FRAME

ÿ 210.5

133

Noise (dB)

68

Model

309

Head (m)

20

42.9 170.5

68

213.7

Pumps WATERCO Hydrostorm ECO PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Price 2” port supplied with 2” imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal € 1,410.00 244100EUM Hydrostorm ECO 100 3 speed Price and availability for (2 1/2” / 75mm ports) TÜV approved models available on request

Saving Energy Conventional pool pumps are limited to one set speed. A pool pump is usually sized to cater for the pool’s maximum water flow requirements, which may either be the sand filter’s backwash water flow or to provide sufficient water flow to operate a suction cleaner.

As the speed of a conventional pump cannot be changed, the same maximum water flow is applied across the pool’s various requirements.

Equipped with the very latest 3 speed permanent magnet brushless DC motor, Hydrostorm ECO is capable of lowering its motor speed, reducing water flow and lowering its energy consumption.

Noise Level

Flow Curve

69 68.5

16

68

14

67.5

Noise Level (dBA)

Low speed (1900rpm)

Head (m)

18

12 10 8 6 4

Medium speed (2410rpm)

66 65.5 65 64.5 64

2 High speed (2850rpm)

67 66.5

63.5

0 0

3

6

9

12

15

18

21

63

0

3

6

Flow (m3/h)

9

12

15

18

Flow (m3/h)

3 Speed Options Hydrostorm ECO’s 3 speed options cater for most pool functions.

•H igh speed - Vacuuming and backwash – 1% of the time •M edium speed - Automatic pool cleaners •L ow speed - Filtration – 99% of the time Pool filtration does not require to be operated at a pump’s maximum water flow rate. In fact, your pool’s filtration efficiency improves at lower flow rates. As a pool’s filtration cycle occupies 99% of the run time of a pool pump, you can operate the Hydrostorm ECO on its low speed setting for a majority of its running time, leading to significant energy savings.

S av e t i m e , wat e r a n d e n e r g y.

Hydrostorm ECO can slash its energy use by to 67% by operating it at low speed Low speed (1900rpm)

Specifications Length (mm)

Height (mm)

Width (mm)

651

340

227

Packaged Weight (kg) 10

Flow Rate (m3/h) 12.9 11.5 9.7

Motor Input (kW) 0.62 0.61 0.61

Flow Rate (m3/h) 8.5 7.3 6

Motor Input (kW) 0.32 0.32 0.32

Amps 2.5 2.5 2.4

Noise Level (dBA) 59.8 60.1 60.5

High speed (2850rpm)

Medium speed (2410rpm) Pump Total Head (m) 6.8 8.5 10.0

Pump Total Head (m) 4.3 5.6 6.9

Amps 4.6 4.6 4.6

Noise Level (dBA) 63.4 63.8 64.1

69

Pump Total Head (m) 6.7 9.6 10.6

Flow Rate (m3/h) 17.2 15.3 13.3

Motor Input (kW) 0.94 0.97 0.98

Amps 7.1 7.3 7.3

Noise Level (dBA) 67.7 67.2 67.2

21

Pumps WATERCO HYDROSTORM PUMPS HIGH HEAD - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2” port supplied with 2” imperial & 63mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

244100EUM Hydrostorm 100 19.60m³/hr 0.88kW € 662.92 20.50m³/hr 0.97kW 244125EUM Hydrostorm 125 € 681.00 24.26m³/hr 1.28kW 244150EUM Hydrostorm 150 € 717.16 26.03m³/hr 1.41kW 244200EUM Hydrostorm 200 € 765.37 32.22m³/hr 1.90kW 244250EUM Hydrostorm 250 € 885.59 35.16m³/hr 2.24kW € 1,056.70 244300EUM Hydrostorm 300

The Hydrostorm is designed to have all the extra power you need to cope with modern day swimming pool designs.

WATERCO HYDROSTORM PUMPS HIGH HEAD - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2” port supplied with 2” imperial & 63mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal. € 668.66 2441003EUM Hydrostorm 100 19.6m³/hr 0.91kW € 681.00 2441253EUM Hydrostorm 125 20.8m³/hr 1.08kW € 717.16 2441503EUM Hydrostorm 150 24.1m³/hr 1.33kW € 765.37 2442003EUM Hydrostorm 200 26.3m³/hr 1.45kW € 885.59 32.22m³/hr 1.90kW 2442503EUM Hydrostorm 250 35.16m³/hr 2.24kW € 1,056.70 2443003EUM Hydrostorm 300 Price and availability for TÜV approved models available on request

Flow Curve

Noise Level

25

76

74

Sound Pressure Level (dBA)

Total Head (m)

20

15

350 / 3 phase 10

300 / 3 phase 250 / 3 phase

5

125 150

75 100

200

5

10

15

70

150 300 / triphasé

68

250 / triphasé

66

125

64

100 75

62 60

0 0

350 / triphasé

200

72

20

25

30

35

40

0

45

5

10

15

20

25

30

35

40

3

Flow (m /hr)

3

Flow (m /hr)

Model 244100EUM 2441003EUM 244125EUM 2441253EUM 244150EUM 2441503EUM 244200EUM 2442003EUM 244250EUM 2442503EUM 244300EUM 2443003EUM Phase 1 3

70

HP 1.00 1.00 1.25 1.25 1.50 1.50 2.00 2.00 2.50 2.50 3.00 3.00

Pmax KW 0.88 0.91 1.08 1.03 1.28 1.33 1.41 1.45 1.90 1.81 2.24 2.24

Amps 3.89 1.85 4.80 2.00 5.90 2.40 6.64 2.50 8.40 3.59 10.77 3.58

Volts 220 - 240 380 - 415

Phase 1 3 1 3 1 3 1 3 1 3 1 3

Total Length 541 541 541 541 646 646 646 646 646 646 646 646 Cycle 50 50

Motor Frame 71 71 71 71 80 80 80 80 80 80 80 80

Flow Rate Qmax.

19.60m³/hr 19.60m³/hr 19.8m³/hr 19.8m³/hr 24.26m³/hr 24.26m³/hr 26.03m³/hr 26.03m³/hr 32.22m³/hr 32.22m³/hr 35.16m³/hr 35.16m³/hr RPM 2860 2860

45

Pumps WATERCO HYDROSTORM PLUS PUMPS HIGH HEAD - Single Phase, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2” port supplied with 2” imperial & 63mm metric quick connect unions.

Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal.

2405100EUM Hydrostorm Plus 100 19.7m³/hr 0.98kW € 662.92 24.96m³/hr 1.40kW 2405150EUM Hydrostorm Plus 150 € 717.16 24.56m³/hr 1.51kW 2405200EUM Hydrostorm Plus 200 € 765.37 30.72m³/hr 1.85kW 2405250EUM Hydrostorm Plus 250 € 813.58 2½” port supplied with tail piece to suit 63mm or 75mm pipe connections 34.32m³/hr 2405300EUM Hydrostorm Plus 300

The Hyrdostorm Plus has all the proven features of the Hydrostorm with the added benefit of an innovative lid and lock ring for easier maintenance and a larger capacity strainer basket for increased capacity.

WATERCO HYDROSTORM PLUS PUMPS HIGH HEAD -Three Phase, S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max Price 2½” port supplied with tail piece to suit 63mm or 75mm pipe connections 24.96m³/hr 1.39kW 24051503EUM Hydrostorm Plus 150 € 717.16 24.56m³/hr 1.46kW 24052003EUM Hydrostorm Plus 200 € 765.37 30.72m³/hr 1.87kW 24052503EUM Hydrostorm Plus 250 € 813.58 34.32m³/hr 2.08kW 24053003EUM Hydrostorm Plus 300 € 855.77 39.54m³/hr 2.66kW € 1,000.40 24054003EUM Hydrostorm Plus 400

Flow Curve

Noise Level

25

82

250

80 78

Sound Pressure Level (dBA)

20

Total Head (m)

€ 897.95

1.87kW

15

400 / 3 phase 10

300

125

100

150

74

200

70

150

68

125

64

100

62 5

0 0

5

10

15

400 / 3 phase

200 72

66

250

5

300

76

20

25

30

35

10

15

20

25

30

35

40

Flow (m3/hr)

40

3

Flow (m /hr)

Model

HP

2405100EUM 2405150EUM 24051503EUM 2405200EUM 24052003EUM 2405250EUM 24052503EUM 2405300EUM 24053003EUM 24054003EUM

1.00 1.50 1.50 2.00 2.00 2.50 2.50 3.00 3.00 4.00

Phase 1 3

71

Pmax kW 0.98 1.40 1.39 1.51 1.46 1.85 1.87 1.87 2.08 2.66

Amps/ Phase 4.66 5.8 2.4 6.3 2.5 7.8 3.6 9.00 4.1 5.8

Volts 220 - 240 380 - 415

Phase 1 1 3 1 3 1 3 1 3 3

Total Length 650 676 676 676 676 697 697 736 736 834 Cycle 50 50

Motor Frame 71 80 80 80 80 80 80 90 90 100

Flow Rate Qmax.

19.70m³/hr 24.96m³/hr 24.96m³/hr 24.56m³/hr 24.56m³/hr 30.72m³/hr 30.72m³/hr 34.32m³/hr 34.32m³/hr 39.54m³/hr RPM 2860 2860

45

Pumps WATERCO HydroTuf PUMPS - Single Phase 220v - 240v, S/S shaft, TÜV approved Part No. Product Description 2” port supplied with 2” imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal 2410755EUM Hydrotuf 075 2411005EUM Hydrotuf 100 2411255EUM Hydrotuf 125 2411505EUM Hydrotuf 150 2412005EUM Hydrotuf 200 2412505EUM Hydrotuf 250 2413005EUM Hydrotuf 300 Price and availability for (2 1/2” / 75mm ports) TÜV approved models available on request

The Hydrotuf is ideal for large domestic pools with ancillary systems such as heating, infloor cleaning, vacuum cleaning, fountains and swim jets.

WATERCO HydroTuf PUMPS - Three Phase 380v - 415v, S/S shaft, TÜV approved Part No. Product Description 2” port supplied with 2” imperial & 63mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal 24107553EUM Hydrotuf 075 24115053EUM Hydrotuf 150 24120053EUM Hydrotuf 200 24125053EUM Hydrotuf 250 24130053EUM Hydrotuf 300 Price and availability for TÜV (2 1/2” ports) approved models available on request

Flow Curve

Price

€ 578.55 € 638.81 € 681.00 € 723.18 € 807.56

Noise Level

76

20

Sound Pressure Level (dBA)

74 15

Total Head (m)

€ 578.55 € 584.57 € 602.65 € 638.81 € 681.00 € 723.18 € 807.56

Hydrotuf Q vs Sound Pressure Level (dBA)

Hydrotuf QH 2012

10

250

5

150 75

100

300

75 72

250

70

100

68

200 150

66

300

200

64

125

125 62

0 0

5

10

15

20

25

30

35

40

0

5

10

15

20

TOTAL_LENGTH 451 341

135 310.5

30

Model

HP

Pmax kW

2410755EUM 24107553EUM 2411005EUM 24110053EUM 2411255EUM 24112553EUM 2411505EUM 24115053EUM 2412005EUM 24120053EUM 2412505EUM 24125053EUM 2413005EUM 24130053EUM

0.75 0.75 1.00 1.00 1.25 1.25 1.50 1.50 2.00 2.00 2.50 2.50 3.00 3.00

0.63 0.60 0.86 0.86 0.95 1.01 1.10 1.09 1.50 1.43 1.81 1.73 2.06 1.99

Amps Phase 2.9 1.2 4.0 1.9 4.0 2.0 4.7 2.1 6.8 2.6 8.5 3.6 9.7 3.7

1 3 1 3 1 3 1 3 1 3 1 3 1 3

Total Motor Frame Length 587 71 587 71 587 71 587 71 587 71 587 71 608 80 608 80 629 80 629 80 653 90 653 90 670 90 670 90

207

227.6

175.5

25

245.1

Phase 1 3

72

35

Flow (m3/hr)

Flow (m3/hr)

345.6

Price

Volts 220 - 240 380 - 415

Cycle 50 50

RPM 2860 2860

Flow Rate Qmax.

16.7m3/hr 16.7m3/hr 21.8m3/hr 21.8m3/hr 24.9m3/hr 24.9m3/hr 27.4m3/hr 27.4m3/hr 33.2m3/hr 33.2m3/hr 35.8m3/hr 35.8m3/hr 34.3m3/hr 34.3m3/hr

40

Pumps WATERCO HYDROSTAR MK3 PUMPS HIGH HEAD - S/S shaft, TÜV approved Part No. Product Description Q. Max P. Max 2½” port supplied with tail piece to suit 63mm or 75mm pipe connections 2404300EUM Hydrostar 300 Single Phase 36.3m³/hr 2.33kW 24043003EUM Hydrostar 300 Three Phase 36.3m³/hr 2.25kW

Price € 1,024.51 € 982.32

Flow Curve 25

20

Head (m)

15

10

Hydrostar 300 5

0 0

5

10

15

20

25

30

35

40

Flow Rate (m3/hr)

Model

HP

2404300 24043003

3.00 3.00

Phase 1 3

73

Pmax kW 2.33 2.25

Amps

Phase

10.9 4.1

3 3

Volts 220 - 240 380 - 415

Cycle 50 50

Total Length 792 792

Motor Frame 100 100 RPM 2860 2860

Flow Rate Qmax.

36.3 36.3

Commercial Pumps WATERCO HYDROSTAR MK3 PUMPS - HIGH HEAD - Three Phase Part No. Product Description Q. Max 3” port supplied with 3” imperial & 90mm Metric quick connect unions 240440033EUM Hydrostar 400 MKIII 61.0m³/hr 240450033EUM Hydrostar 500 MKIII 68.0m³/hr 240460033EUM Hydrostar 600 MKIII 76.0m³/hr 240470033EUM Hydrostar 700 MKIII 77.0m³/hr

Flow Curve

P. Max

Price

2.92kW 3.16kW 4.36kW 5.18kW

€ 1,117.54 € 1,310.63 € 1,427.65 € 1,503.71

Noise Level 76

25.000

700

75 20.000

600

74 73 Noise (dB)

Head (m)

15.000

Hydrostar 700 MK3 new basket

10.000

72

500

71

400

70

5.000 Hydrostar 400 MK3 new basket

Hydrostar 600 MK3 new basket

Hydrostar 500 MK3 new basket

69

0.000 0

10

20

30

40

50

60

70

80

68

90

0

Flow (m3/hr)

12

24

36

48

60

72

84

Flow (m³/h)

Model

The Hydrostar MKIII has been redesigned to provide a substantially quieter operation with even higher flow rates and higher head than the previous Hydrostar models. Waterco has improved the hydraulic efficiency of the pump with the introduction of an internal volute. The volute’s hydraulic design provides a natural balanced water flow and reduces hydraulic turbulence.

240440033 240450033 240460033 240470033 Phase 3

Nom. HP 4.00 5.00 6.00 7.00

kW 2.92 3.16 4.36 5.18

Volts 380 - 420

Hmax Pmax (m) 21 21 22 24

(kW) 2.92 3.16 4.36 5.18 Cycle 50

Qmax

Amps/ Phase Phase

(m3/hr) 61 68 76 77

5.2 5.8 7.0 8.2

3 3 3 3

RPM 2900

Total Motor Length Frame 834 834 834 834

100 100 100 112

Pump Rating IP55

144 160

242 235

145

101

131 160 181

834

427

ø251

393 262

529

74

Commercial Pumps WATERCO BH5000 CAST IRON PUMPS - BRONZE IMPELLOR - Three Phase 380v - 415v Part No. Product Description Q. Max P. Max Price C.I. 4.0kW 6” suction port and 4” discharge 79.0m³/hr 4.4kW € 2,426.23 24094030 C.I. 5.5kW 6” suction port and 4” discharge 100.0m³/hr 6.0kW € 2,838.74 24095530 C.I. 7.5kW 6” suction port and 4” discharge 124.0m³/hr 8.3kW € 3,224.11 24097530 C.I. 9.5kW 6” suction port and 4” discharge 136.0m³/hr 10.0kW € 3,647.48 24099530 C.I. 11.0kW 6” suction port and 4” discharge 142.0m³/hr 11.3kW € 3,908.01 240911030 Flow Curve

Noise Level

35

85

30

Noise (dB)

Head (m)

The BH5000 features a hydraulically efficient bronze impeller which allows for quiet operation and excellent flow.

Constructed with a composite wet end and clear lid which allows easy inspection of the 18 litre capacity polypropylene strainer

20 15

75 7.5 kW 70 4 kW

5.5 kW

65

10 11 kW

5 5.5 kW

0

11 kW

80

25

7.5 kW

60

9.5 kW

4 kW

0

20

40

60

80

100

120

140

0

30

60

90

120

150

Flow (m³/h)

160

Flow Rate (m3/hr)

C.I. Pump Model 4kW 5.5kW 7.5kW 9.5kW 11kW Phase 3

Code No. 240911030 24099530 24097530 24095530 24094030

Hmax (m) 26 27 26 26 29

Pmax (kW) 4.00 5.50 7.50 10.00 11.00

Volts 380 - 420

Kw / HP 11 / 15 9.5 / 13 7.5 / 10 5.5 / 7.5 4.0 / 5.5

WATERCO BH5000 FLANGE ASSEMBLY KITS Part No. Product Description ZZGP600FK 6” Flange Assembly Kit ZZGP600FKAS 4” Flange Assembly Kit ANSI ZZGP160FK 160mm Flange Assembly Kit ZZGP110FKAS 110mm Flange Assembly Kit ANSI

Note: Flange Assembly Kits Include:

Cycle 50

Qmax (m3/hr) 79 100 124 136 142

Phases 3 3 3 3 3

RPM 2950

Current (A/phase) 6.8 9.2 13.2 19.4 21.5

Pump Rating IPX5

A (EMG) 422.7 422.7 422.7 384.1 329.1

Nominal Size 6” 4” 160mm 110mm

Price € 262.42 € 204.79 € 222.57 € 189.01

1 x Backing Ring, 1 x Stub Flange, 1 x Stub Gasket, 8 x bolts, 8 x Nuts and 16 x Washers

75

76 Waterco Pool Water Recirculation

www.waterco.eu

Pool Water Recirculation 77

www.waterco.eu

Waterco Pool Water Recirculation

Pool Water Recirculation EYEBALL FITTINGS - for Concrete Pools Part No. Product Description 29101 Multi Directional Eyeball (white) Imperial (Slipfit suitable for Concrete Pools) 29150

Multi Directional Eyeball (white) Metric (Slipfit suitable for Concrete Pools)

29102

Multi Directional Eyeball (white) Imperial (Slipfit suitable for Concrete Pools)

29165

Multi Directional Eyeball (white) Metric (Slipfit suitable for Concrete Pools)

Ø 65

Ø 24.9

Ø 39.6

44.5

Nom. Size 1½”

Price € 7.27

50mm

€ 7.27

2”

€ 7.27

63mm

€ 7.27

The range of Waterco self set eyeballs simply “push into” the return pipe leaving a clean and professional finish everytime. Once the pool interior is finished, the remaining pipe work is cut flush to the interior and the eyeball simply pushed inside, eliminating the need for threaded fittings. Having a totally adjustable eyeball return makes installation ideal for standard pool returns, beach entries and solar returns.

EYEBALL FITTINGS - for Vinyl/Fibreglass Pools Part No. Product Description 29106 Multi Directional Eyeball (c/w backnut suitable for Vinyl/F/Glass Pools)

Nom. Size 1½”

Price € 9.58

Nom. Size 2” / 63mm

Price € 151.10

Ø 71.0 Ø 69.2

41.6

51.75

Ø 31.4

Ø47.5 OD

IN LINE STRAINER Part No. Product Description 14560 In-Line Strainer

An ideal product to be fitted in-line, it acts as a pre-strainer which helps to remove larger debris. Very beneficial if fitted before a solar system.

78

Pool Water Recirculation SUPASKIMMERS Part No. Product Description 29201 Supaskimmer (Concrete) 29205 Supaskimmer (F/glass) 29210 Supaskimmer Widemouth (Concrete) 292011 Commercial Supaskimmer (Glass reinforced lid)

Supaskimmer Widemouth

Price € 186.39 € 293.16 € 246.70 € 200.06

Specifications Model

Max. Surface Area

Suction Pipe (inch)

Basket Opening Capacity (mm) (litres)

Supaskimmer

75 m2

2 x 2”

247x152

Supaskimmer Widemouth

75 m2

2 x 2”

551x152

Total Height (mm)

Total Depth (mm)

Unit Weight (kg)

5.9

580

500

7

5.9

580

500

10

Supaskimmer Widemouth 666.06 500.1 333.1

551 499

ø279.95

• Lock down leaf basket and vacuum plate - holds the leaf basket and vacuum plate firm.

• Large capacity basket – 5.9 litres, over double the size of conventional skimmers.

• 2 x 2” bottom suction ports – less water flow restrictions.

• 2 x 11/2” side ports – ideal for wall mount cleaners.

• New child resistant safety lid – prevents child accidents.

• Deeper body style – less chance of running pumping equipment dry.

• Built in overflow drain port to assist the prevention of flooding, during heavy rain.

551.2

204 151

ø315

235.3

The Supaskimmer is a large capacity skimmer box which is ideal for use in large domestic, semi commercial and commercial swimming pools.

Because of its large capacity 5.9 litre debris collection it is also ideal for any swimming pool that is constructed in leafy environments.

595 458.7

Supaskimmer

299.5

203.7 151

Supaskimmer

77.1

Supaskimmer 299.5 255.4

499.1 333

154.6

203.5 595 235

77

79

315

Pool Water Recirculation S75 SKIMMERS Part No. Product Description 29251 Skimmer Box S75C MK2 (Concrete) 29256 Skimmer Box S75F MK2 (F/glass)

Price € 154.47 € 175.46

Specifications Opening (mm)

Basket Capacity (litres)

Total Height (mm)

Total Depth (mm)

Unit Weight (kg)

S75

75 m2

2”

247x152

2.4

520

440

6

Dimension 277

300 251.5 315

280

153.8 203.5

It has a built in overflow drain port to assist the prevention of flooding, during periods of heavy rain. A horizontal 2” suction take-off reduces the suction lift demands on the pump, saving energy.

Suction Pipe (inch)

555

The S75 skimmer is a general purpose skimmer which can be used in concrete, fibreglass and above ground pool installations.

Max. Surface Area

239.4

S75 Skimmer Box

Model

• Lock down leaf basket and vacuum plate - holds the leaf basket and vacuum plate firm • Child safety lid lock down system – prevents child accidents • Square and round deck lid configuration

444

246.2

SP5000 SKIMMERS Part No. Product Description ASM002 Paramount SP5000 (Concrete) ASM004 Paramount SP5000 (F/glass)

Price € 126.45 € 152.88

Specifications Model

Max. Surface Area

Suction Pipe (inch)

Opening (mm)

Basket Capacity (litres)

Total Height (mm)

Total Depth (mm)

Unit Weight (kg)

SP5000

75 m2

2”

255x155

2.6

478.2

385

5

Dimension 410.5

320

205

154.4

254.7

478.2

320

183

The SP5000 skimmer is a general purpose skimmer which can be used in concrete, fibreglass and above ground pool installations.

The SP5000 is sized to minimise excavation and reduce concrete and steel requirements, whilst maintaining an optimum skimming action. A horizontal 2” suction take-off reduces the suction lift demands on the pump, saving energy.

305

250.5

SP5000 Skimmer

80

Ø271

Pool Water Recirculation SKIMMER LINTEL Part No. Product Description 62421 Skimmer Lintel

Price € 24.13

SKIMMER BOX EXTENSION RING Part No. Product Description 624105 Skimmer Extension Ring Supaskimmer Dress Ring SQ T/Lock S/S - in sandstone colour 624181S 292631 Skimmer Supaskimmer Face Plate SK101 - in white colour Skimmer Supaslimmer Escutcheon Clip - in white colour 62439

Price € 9.59 € 47.77 € 21.78 € 6.54

Waterco’s Skimmer Lintels are manufactured in ABS plastics and are designed to become an integral part of Waterco’s Skimmer Box in a concrete installation.

The lintel will structurally support the installation of all types of pool pavers across the skimmer box opening.

If the skimmer is to be installed so that the deck lid will not be secured to the skimmer body, Waterco recommends using a skimmer Extension Ring (624105) for trouble free installation. The Extension Ring sits snugly in between the skimmer body and the Deck Ring and is strong enough to hold its shape during concreting. Using the Extension Ring will prevent misalignment of the Deck Ring and the skimmer body.

• Eliminate problems caused by concrete intruding into the skimmer box cavity.

• Ensure there are no obstructions to removing and replacing vacuum plates.

• Extension rings can be piggybacked to provide extensions in multiples of 60mm

81

Pool Water Recirculation AUTOMATIC WATER LEVELLER Part No. Product Description 29319 Auto Water Leveller MK2

Price € 153.40

Waterco’s Automatic Water Leveller adds to the leisure time of the pool owner by eliminating the need to keep an eye on the water level.

• Fully automatic operation • Overflow connection

• Child resistant lock down lid assembly.

• Simple servicing and connection

By maintaining the correct water level, the Automatic Water Leveller eliminates the risk of an expensive pump failure brought about by starvation of water through evaporation or leakage.

WATER LEVEL

1½/50mm UPVC

POOL WALL

70mm

INSIDE

265mm

-100mm

POOL

246mm

298mm 176mm

Dress ring and lid

UPVC pipe from overflow to drain

The Automatic Water Leveller is placed in the ground at a convenient location near the pool and plumbed to a separate pool inlet and also to the fresh water supply. The leveller remains inactive until the pool water level drops below or rises above the correct point at which time it will restore the right level by adding or draining water as the situation requires.

82

Pool Water Recirculation WATERCO FLUSH DECK GRATING Part No. Product Description 900304 Flush Deck Grating (301mm wide) (41 per metre - £51.66 per metre) 900305 Flush Deck Grating (250mm wide) (41 per metre - £47.15 per metre) 291701 Floor Inlet - Adjustable (40mm x 50mm)

Price € 1.95 € 1.77 € 19.86

WATERCO MAIN DRAINS Part No. Product Description 29300 Waterco Main Drain - white c/w valve and stem 29308 Waterco Main Drain - beige c/w valve and stem 29301 comprises:- Body 29302 Hydrostatic Valve 29304 Main Drain Stem 29303 Cover & Dress Ring (white) OR 29307 Cover & Dress Ring (beige) 29313 Grease Plate Hydrovalve

Price € 49.13 € 49.13 € 18.09 € 12.06 € 10.29 € 8.51 € 8.51 € 44.87

123.4

Ø 223.5 148

Main Drain Body

315

Ø 55.4

Ø 140.4

WATERCO HYDROSTATIC VALVE Part No. Product Description 29302 Main Drain Hydrostatic Valve

83

Price € 11.95

Waterco Lights

www.waterco.eu

Lights www.waterco.eu

Waterco Lights

Underwater Lights WATERCO BRITESTREAM LED NICHE LIGHT Part No. Product Description 264400 BriteStream LED Niche Light - white 264406 BriteStream Blue LED Niche Light 264417 BriteStream Multicoloured LED Niche Light 264401 BriteStream LED Niche Light - white 264407 BriteStream Blue LED Niche Light 264409 BriteStream Multicoloured LED Niche Light 264403 BriteStream LED Niche replacement kit - white 264404 BriteStream Blue LED Niche replacement kit 264419 BriteStream Multicoloured LED Niche replacement kit 6501130 Stainless Steel Dress Ring (for niche mounted light only)

Britestream LED Niche Light is a flush mounted light which protrudes only 11mm from the pool/spa wall.

Its energy efficient super bright LEDs are capable of delivering 352 lumens of light* and operate on only 15 watts of energy.

• Energy saving – operates on 15% of the energy of a halogen pool light • Long life – LED life span of over 70,000 hours • Multicoloured LED light capable of producing a multitude of different colours without the need for coloured lenses.

• Optional Stainless Steel Rim * Britestream White LEDs deliver 352 lumens of light.

• • • • • • •

Nom. Size 12m 12m 12m 20m 20m 20m 1m 1m 1m -

Projects ONLY 9mm into the pool or spa Super bright LED’s capable of delivering 352 lumens (White LED) Polycarbonate construction Life span of over 70 000 hours 180° illumination Uniform diffusion of light Operates on only 15% of the electrical power of a halogen light

Specifications Light Output 352 lumens

Zonal Distribution 0 to 180 degrees

Power Usage 15Watt

Input Voltage 12V AC

LED Life 70,000 hours

Extra Slim Protrusion

Easy Coiling Extra space for easy coiling and storage of the light’s power cord

Precision Built BriteStream comprises of a precision built printed circuit board totally enclosed in a waterproof housing.

Energy Saving BriteStream LEDs operate on only 15 watts of energy, which is approximately 15% of the electrical power usage of a halogen light.

Super Bright Super bright energy saving LEDs capable of delivering 352 lumens of light. [White LED light] Long Life BriteStream LED has a life span of over 70 000 hours, which is equivalent to over 30 years of illumination. (Based on 6 hours usage per day).

Triple seal connection Three O’-rings are in place to provide a triple seal eliminating the possibility of any leakages travelling up the power cord.

Built-in Heat Management The LED heat output is automatically managed by its electronic circuitry.

Specifications Zonal Distribution

Power Usage

Input Voltage

LED Life

0 to 180 degrees

15 Watt

12V AC

70,000 hours

SWITCH SEQ NO

COLOURS & MODES SELECTION

1

WHITE

Optional Stainless Steel Rim

2

SLOW CHANGING COLOURS - 20 SECOND RAMPING

Warranty BriteStream LED lights are covered by a comprehensive 12 month warranty.

3

FAST CHANGING COLOURS - 5 SECOND RAMPING

S av e t i m e , wat e r a n d e n e r g y.

Price € 446.87 € 446.87 € 487.97 € 479.33 € 479.33 € 504.94 € 415.49 € 415.49 € 409.15 € 33.75

4

BLUE

5

MAGENTA

6

RED

7

YELLOW - GREEN (GOLD)

8

GREEN

9

AQUA

86

Dimensions (mm)

169.2

196 11.0

222

Ø166.4

Underwater Lights WATERCO BRITESTREAM LED NICHE CONVERSION KITS Part No. Product Description 6501102 Niche Mounting Ring Certikin Replacement 6501103 Niche Mounting Ring Hayward Replacement 650107 Niche Adaptor Ring Pentair Replacement

Certikin

Hayward

Nom. Size 165mm 165mm 165mm

Price € 24.11 € 24.11 € 27.72

Pentair

Waterco conversion kits allow the Britestream LED Niche Mounted light to be installed in either a Certikin, Hayward or Pentair Niche that is already installed in the pool wall.

Waterco Niche mounted LED replacement kits to be used in conjunction with Certikin, Hayward or Pentair Conversion Kits

The Britestream Multicoloured LED light is cleverly designed with a built in colour memory, which means the light’s multicoloured LEDs always defaults to its last colour selection.

Nine different colour programs are available:

SWITCH SEQ NO

COLOURS & MODES SELECTION

1

WHITE

2

SLOW CHANGING COLOURS - 20 SECOND RAMPING

3

FAST CHANGING COLOURS - 5 SECOND RAMPING

4

BLUE

5

MAGENTA

6

RED

7

YELLOW - GREEN (GOLD)

8

GREEN

9

AQUA

87

Underwater Lights

Britestream LED Light utillises energy efficient super bright LEDs that are capable of delivering 352 lumens of light* and operate on only 15 watts of energy.

WATERCO BRITESTREAM LED LIGHT - SURFACE MOUNTED Part No. Product Description 264324 Britestream LED Light 264326 Britestream Blue LED Light 264501 Britestream Multicoloured LED Light 264300 Britestream LED Light 264325 Britestream Blue LED Light 264502 Britestream Multicoloured LED Light 264305 Britestream LED Light 264315 Britestream Blue LED Light 264318 Britestream Multicoloured LED Light 264314 Britestream LED replacement kit 264317 Britestream Blue LED replacement kit 264320 Britestream Multicoloured LED replacement kit

Price € 394.94 € 394.94 € 409.61 € 427.40 € 427.40 € 447.91 € 459.86 € 459.86 € 465.14 € 357.47 € 357.47 € 409.15

Super Bright Super bright energy saving LEDs capable of delivering 352 lumens of light. (White LED light)

• Energy saving - operates on 15% of the electrical power of a halogen light • Long life span of over 70,000 hours • Multicoloured LED light capable of producing a multitude of different colours without the need for coloured lens.

• Universal light adaptor and easy to use retrofit connector

Long Life BriteStream LED has a life span of over 70,000 hours, which is equivalent to over 30 years of illumination. (Based on 6 hours usage per day).

Built-in Heat Management The LED heat output is automatically managed by its electronic circuitry.

Superior Construction BriteStream LEDs are totally enclosed in a waterproof Polycarbonate housing.

Pool Cleaner Shield Improves the aesthetics of the installation and prevents the pool cleaner skirt from being trapped behind the light.

**Britestream White LEDs deliver 352 lumens of light.

Specifications Zonal Distribution

Power Usage

Input Voltage

LED Life

0 to 180 degrees

15 Watt

12V AC

70,000 hours

220mm / 8.6”

Dimensions (mm)

Nom. Size 2m 2m 2m 12m 12m 12m 20m 20m 20m 1m 1m 1m

Innovative Lens Its innovative polycarbonate lens cools the LEDs and provides a uniform diffusion of light.

Slotted Rims Assists heat dissipation, as well as permitting water circulation.

66mm / 2.6”

Energy Saving BriteStream LEDs operate on only 15 watts of energy, which is approximately 15% of the electrical power usage of a halogen light.

S av e t i m e , wat e r a n d e n e r g y.

88

Underwater Lights LITESTREAM UNDERWATER LIGHTS (12 Volts, 100w Halogen) - SURFACE MOUNTED Part No. Product Description Nom. Size Price 263300 Litestream 100w light 20M 20m € 214.90 263303 Litestream 100w light 12M 12m € 168.00 263302 Litestream 100w light 4M 4m € 167.08 263301 Litestream 100w light 2M 2m € 165.17 WATERCO UNDERWATER LIGHT COLORED LENSES - suitable for Halogen light only Part No. Product Description Price 26603 Screw - on Coloured lenses - Blue € 11.71 26605 Screw-on coloured lens - Red € 11.71 26606 Screw-on coloured lens - Green € 11.71

Coloured Lenses The Litestream Underwater Lights come with an additional blue screw-on lens.

Red and green lenses are also available for separate purchase.

Electrical Specifications Input Voltage 12 VAC Input Power 100W

RETROFIT CONNECTOR (IP68) Part No. Product Description 650150 Retrofit Connector Assembly

Price € 13.52

Retrofit Connector (IP68) Simply crimp both connections with the splice connectors, slide the cable sleeve over the connection and hand tighten the gland nuts.

Cable sleeve

Splice Connectors

89

Pool light cable

Gland nut with O’- ring

Underwater Lights WATERCO UNDERWATER LIGHT CONVERSION KITS - SUITABLE FOR SURFACE MOUNTED LIGHTS Part No. Product Description Price 26601 Fibreglass Conversion Kit € 24.12 266020 Wooden Pool conversion kit including dress ring € 30.91 Fibreglass Conversion Kit - 26601 a) Drill a 28mm hole in the pool wall at 550mm below top of coping. This is where the cable will pass through the wall. b) Cover the back of the Gland Plate with Silicone Sealant and insert the boss of the Gland Plate into the drilled hole. c) Drill 4 holes with a 1/8” drill using the gland plate holes as a drilling guide. Apply a small amount of Sillicone Sealant on the screws and drive into predrilled holes. d) Screw wall bracket to the wall and seal screws. e) Wind cord loosely around back of light catching it in clips. f) Insert gland nut, rubber washer and then plastic seal ring onto the power cord and feed the power cord through the gland plate. g) Tighten gland nut onto gland plate. h) Fit light to Wall Bracket by sliding the light downwards until the clip and hook engage. Fix with screw at top.

Vinyl liner / wooden pool conversion kit - 266020 a) Drill a 32mm hole in the pool wall at 550mm below top of coping. This is where the cable will pass through the wall. b) Mark fixing holes for Gland Plate and Wall Brackets. Drill holes to suit screws supplied. c) After fitting liner, slit liner at 32mm hole position. Fit Gland Plate and Wall Bracket. d) Wind cord loosely around back of light catching it in clips. e) Insert gland nut, rubber washer and then plastic seal ring onto the power cord and feed the power cord through the gland plate. f) Tighten gland nut onto gland plate. g) Fit light to Wall Bracket by sliding the light downwards until the clip and hook engage. Fix with screw at top.

90

Sanitization 91

www.waterco.eu

Waterco Sanitization

Sanitization WATERCO SELF CLEAN SALT CHLORINATORS Part No. Product Description 25126361 Electrochlor 25A SC LCD 2514034 Electrochlor 30A SC LCD

Nom. Size 25 Amps 30 Amps

Ctn Qty

Price

Electrochlor Salt Water Chlorinator The Electrochlor will automatically maintain the chlorine level of your pool and eliminate problems associated with periods of very high or low chlorine levels. Fewer fluctuations in chlorine levels mean fewer fluctuations in pH levels. This adds up to more stable, balanced water.

Consistently maintained sanitizer levels in the pool water will prevent the growth of all common algae. A salt-water chlorinated pool requires much less attention than a chlorine pool A salt water pool provides a more comfortable swimming environment. Salt water feels better and is less irritating to the body than standard chlorinated water. The amount of salt required varies from 4000ppm to 6500ppm. In comparison, a teardrop is about 7,200 ppm and ocean water is about 36,000 ppm.

Electrochlor Power Pack The Power Pack monitors and controls chlorine production by regulating the amount of electrical energy supplied to the salt cell.

Large aluminium heat sink for heat dissipation.

Space-saving vertical design.

UV and weather proof housing.

Permanent operation guide.

Large backlit LCD display for easy viewing.

Clearly marked backlit buttons.

Chlorination bar graph. Chlorine production can be adjusted to reflect different seasonal requirements.

Super chlorination 24 hour chlorine production to boost up the pool’s chlorine level.

Maintenance Electrochlor Self Clean Model has the added ability to reverse the polarity of the voltage to clean calcium buildup off its electrodes.

Brass pin quick connectors (Available on Self Clean model only).

Unobtrusive cradle design to minimise calcium build up.

Durable UV stabilised engineering plastic cell housing with a maximum working pressure of 4 bars.

Large lock ring for easy access.

Titanium Electrolytic Cell – the cell’s large surface area enables it to operate under low salt conditions.

Hydraulically efficient design.

Optimised current density to maximise cell life.

2” / 63mm connections for quick connection to pipe work.

Self Clean Model is displayed.

Electrochlor LCD Power pack is only available with Self Clean Models.

Please note: Correct earth bonding is essential when using this product.

Refer to the installation manual for correct fitting instruction.

70mm (2.8in)

ElectroChlor Power Pack Dimensions

Model

Input Watt kW (max)

Output current DC amp (max)

Chlorine production gram/hour

25A SC 30A SC

0.3125 0.3750

25 amps 30 amps

25 30

Max Pool Capacity Climate <26°C >26°C 150 m3 103m3 3 180m 125m3

• All units are equipped with a 3 amp self-resetting fuse.

• Pool capacity is based on a stabilised swimming pool with a minimum salt level of 5,000 ppm

368mm (14.5in)

A

D

B

200mm (7.9in)

141mm (5.6in)

FRONT VIEW

SIDE VIEW

25 & 25A SC 30 & 30A SC Primary input volts 220-240 VAC 50/60 Hz 220-240 VAC 50/60 Hz Input power 312W 375W Max. current draw 10A 10A Pump outlet Max. 8A 8A Cell Volts 6-8V 6-8V Degree of protection to AS1939 IP23 IP23

C

*Dimensions in inches are approximate conversions

Model 30 SC 25 SC

A 423.5mm 353.5mm

B 136.5mm 117.5mm

C 280mm 129mm

D 188.8mm 194.3mm

SALT LEVELS Minimum = 4000ppm

Optimum = 6000ppm

Maximum = 6500ppm

92 Waterco Sanitization

www.waterco.eu

Sanitization HYDROCHLOR

WATERCO HYDROCHLOR SALT CHLORINATORS Part No. Product Description 25140200 Hydrochlor 20A SC LCD Hydrochlor 25A SC LCD 2514025 Hydrochlor 30A SC LCD 2514030

Nom. Size 20 Amps 25 Amps 30 Amps

Ctn Qty

Price € 1,041.30 € 1,118.52 € 1,164.15

Hydrochlor Salt Water Chlorinator The Hydrochlor will automatically maintain the chlorine level of your pool and eliminate problems associated with periods of very high or low chlorine levels. Fewer fluctuations in chlorine levels mean fewer fluctuations in pH levels. This adds up to more stable, balanced water.

Consistently maintained sanitizer levels in the pool water will prevent the growth of all common algae. A salt-water chlorinated pool requires much less attention than a chlorine pool A salt water pool provides a more comfortable swimming environment.

Salt water feels better and is less irritating to the body than standard chlorinated water. The amount of salt required varies from 3500ppm to 6000ppm. In comparison, a teardrop is about 7,200 ppm and ocean water is about 35,000 ppm.

• Self Cleaning, Electrolytic Cell • Battery Back Up • Energy Saving Winter Mode

• Ezy Timer • Precision Chlorine Production • Super Chlorination Function

Hydrochlor Power Pack The Power Pack monitors and controls chlorine production by regulating the amount of electrical energy supplied to the salt cell.

1

Maintenance Hydrochlor Self Clean Model has the added ability to reverse the polarity of the voltage to clean calcium buildup off its electrodes.

Brass pin quick connectors.

1. Large aluminium heat sink for heat dissipation.

2

Suitable for pool covers

Large lock ring for easy access.

Unobtrusive cradle design to minimise calcium build up.

2. Space saving vertical design.

3

3. UV and weather proof housing.

Titanium Electrolytic Cell – the cell’s large surface area enables it to operate under low salt conditions.

4. Chlorinator Override switch.

5. Ezy timer.

6. Chlorine production can be adjusted to reflect different seasonal requirements.

4 6 5

7

2” / 50mm connections for quick connection to pipe work.

Hydraulically efficient design.

7. Chlorine production indicator LEDs.

8

8. No Flow LED.

HydroChlor Power Pack Dimensions 70mm (2.8in)

• All units are equipped with a 3 amp self-resetting fuse.

• Pool capacity is based on a stabilised swimming pool with a minimum salt level of 5,000 ppm

368mm (14.5in)

A

D

B

200mm (7.9in)

141mm (5.6in) SIDE VIEW

Input Watt Output Chlorine Max Pool Capacity (L) Climate (W) current DC Production max (A) max (g/hr) Temperate Tropical Hydrochlor 20A 290 20 20 80,000 48,000 Hydrochlor 25A 330 25 25 100,000 60,000 Hydrochlor 30A 380 30 30 120,000 72,000 Model

Please note: Correct earth bonding is essential when using this product. Refer to the installation manual for correct fitting instruction.

FRONT VIEW

Durable UV stabilised engineering plastic cell housing with a maximum working pressure of 4 bars.

C

Primary Input (Volts) / Frequency (Hz) Input Power (W) Maximum Total Current (A) Pump Outlet Maximum (A) Cell Voltage (V) Degree of Protection

20A 220-240 / 50-60 290 10 8 6-8 IP23

25A 220-240 / 50-60 330 10 8 6-8 IP23

30A 220-240 / 50-60 380 10 8 6-8 IP23

*Dimensions in inches are approximate conversions

Model 20SC /25SC /30SC

A (mm) 423.5

B (mm) 136.5

C (mm) 180

D (mm) 188.8

SALT LEVELS Minimum = 4000ppm

93

Optimum = 6000ppm

Maximum = 6500ppm

Sanitization

Chlorine free pool

A chlorine free swimming pool that’s free of odours and taste, soft and gentle on the skin – what’s more, no shower required after swimming. Just like a refreshing swim in a natural spring.

Great news for swimmers, people with allergies and asthma, the environment and the pool itself.

TH

MA COUNC

AL

•

• Z)

M

(N

H

T

94

AS

• Minimal maintenance • Water saving • Asthma and allergy friendly • Refreshing swim in fresh water environment

RAL I A

NATION

ST

The benefits are endless • Chlorine & salt free • Outstanding water clarity • Fully automated sanitisation and pH control • No need to shower afterwards • Extends the life of the pool surface and pool equipment

IL

®

AU

AS

A F ON O U N D AT I

SENSITIVE CHOICE SUPP OR T IN G A S T H M A CA RE

Sanitization How does it work?

Hydroxypure sanitisation is based on the Peroxone Treatment Process (PTP), which combines Peroxypure (a specially blended form of Hydrogen Peroxide) (H²0²) and hybrid ozone (0³) to turbocharge the sanitisation process.

H²0² + 0³ = Peroxone

The Peroxone treatment process is known as the new water treatment process of the 21st century because of its superior ability to remove bacterial threats, better than any other oxidation processes currently available to the swimming pool market.

Hybrid Ozone O³

Peroxypure H²O² Pool with Peroxypure residual

Ozone reacts with Peroxypure residual to form Peroxone

Filtration of oxidised material

Powerful oxidation

The use of two disinfectants (ozone and peroxypure) work in harmony to increase active oxygen in the water. The synergy of the two disinfectants will ensure your water environment is safe without the creation of harmful chemical by-products.

“A safe, clean and hypoallergenic pool water that is free from impurities.”

Hydroxypure Part No. Product Description HPP001 Fully Automated System - Professional Comprising of twin dosing pumps, hybrid ozonator and multicyclone complete with constant monitoring of poolwater pH levels.

HPD002

PP220025 PP220010 PA220025 PA220010 348119

348109

348916

Fully Automated system - Professional Deluxe Comprising of twin dosing pumps, hybrid ozonator, multicyclone and complete with constant monitoring of poolwater and pH levels.

Equipped with data logging capability and access via internet web server. Remote monitoring of water balances, dosing rates, chemical consomption and more. Setting changes can be completed from anywhere you have internet access.

Peroxypure 25l N/R Drum Peroxypure 10l N/R Drum Peroyacid 25l N/R Drum Peroxyacid 10l N/R Drum Hydroxypure Complete Maintenance the complete maintenance chemical is used as a flocculent and clarifier. It also contains a phosphate remover.

Hydroxypure One Step This chemical is used after the alkalinity and calcium hardness levels are adjusted to the recommended levels. One step will help lock in the settings and reduce consumption of Peroxyacid.

Hydroxypure test strips

S av e t i m e , wat e r a n d e n e r g y.

95

Nom. Size

Ctn Qty

Price € 5,995.00

€ 9,180.00

25 litres 10 litres 25 litres 10 litres 5 litres

€ 150.00 € 76.00 € 46.80 € 42.12 € 160.29

5 litres

€ 52.65

50 strips / vial

6/ctn.

€ 170.82

Waterco Spa Equipment

www.waterco.eu

Cleaning Accessories www.waterco.eu

Waterco Spa Equipment

Cleaning Accessories

Waterco S/S Algae Brush

WATERCO CLEANING ACCESSORIES Part No. Product Description 313052 Waterco Brush Vacuum Head 31312 Waterco Flexible Vacuum Head 31315 Waterco Leaf Skimmer 313151 Waterco Deluxe Leaf Skimmer 31320 Waterco Leaf Rake 313201 Waterco Deluxe Leaf Rake 31327 Waterco Curved Pool Broom Nylon Bristle 313260 Waterco Straight Pool Broom polypropylene Bristle 31307 Waterco S/S Algae Brush 31385 Telescopic Handle 31380 Telescopic Handle 31340 Leaf Scoop Moulded 36205 Filter Sox (Pack of 5)

Nom. Size

18” 18” 6” 8’ -16’ 4’ - 8’

Ctn Qty 10 10 20 18 20 16 20 20 20 12 12 20 20

Price € 21.93 € 24.96 € 14.17 € 17.04 € 15.25 € 18.54 € 19.97 € 16.53 € 22.94 € 33.90 € 22.28 € 9.75 € 11.50

Flexible Vacuum Head

Leaf Scoop Moulded

Straight Pool Broom Polypropylene Bristle

Brush Vacuum Head

Leaf Rake (bag type)

Curved Pool Broom Nylon Bristle

98

HEATING 99

www.waterco.eu

Waterco Heaters

Pool Heating - Heat Pumps The latest advancement in swimming pool heating, ElectroHeat Heat Pumps are an energy efficient way to heat your swimming pool or spa. ElectroHeat produces up to 5 times more heat energy than the electrical energy it consumes.

Extra Large Evaporator Area (ElectroHeat Plus) ElectroHeat Plus has an extra large evaporator allowing it to collect more heat from the outside air.

Weather proof ABS Cabinet The ElectroHeat’s cabinet is constructed from UV treated, corrosion proof ABS, enabling the ElectroHeat to withstand most weather conditions.

Automated Controls Simply program your desired pool water temperature and let the ElectroHeat do the rest.

Protection devices have been built into the heater for ease of operation and to increase the durability of the product.

• Auto defrost control to eliminate frost on the evaporator in cold temperature conditions.

• Auto Flow switch to switch off the system when there is no water flow.

• High /low pressure auto reset to shut the system and compressor in the event of low or high pressure.

• Compressor protection via time delay – A time delay is incorporated into the system, allowing the refrigerant pressures to equalise before the compressor starts/restarts.

Environmentally friendly refrigerant ElectroHeat products use the R410A refrigerant, a high thermodynamic performance coolant that is environmentally friendly and totally harmless to the ozone layer. This coolant is in accordance with the Montreal protocol and will not harm the ozone layer.

Scroll compressor Scroll compressors are the most powerful, energy efficient compressors on the market and most importantly they are also the quietest.

S av e t i m e , wat e r a n d e n e r g y.

The plumbing connections are 50mm / 1 1/2” UPVC half unions for easy plumbing.

Titan double coil heat exchanger: With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class. A Titanium Heat Exchanger offers total protection against erosion and corrosion.

Titanium metal’s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture. Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

Greater Temperature Differential = Greater Heat Power = Faster Results!

Powerful Heat Transfer The exclusive design of the ElectroHeat’s heat exchanger creates an unmatched and powerful heat transfer source.

This is the result of the increased surface area contact the exchanger has with the water that circulates around the condenser tubes. Because of the improved design, the heat exchanger generates a higher temperature differential between the water entering and the water exiting the heat exchanger.

100

Quick and easy installation.

Simply connect the pool return line to and from the heat pump and connect the power source.

Pool Heating - Heat Pumps

WATERCO HEAT PUMPS - All ElectroHeat Plus MKIII and ElectroHeat MKIII heat pumps come complete with a commercial grade Titanium heat exchanger and digital display as standard. All 3 phase heat pumps are supplied with a 3 phase indicator and protector.

ELECTROHEAT PLUS Part No. Product Description EPX016T251-G ElectroHeat Plus MKIII 16kW Single Phase - Digital EPX016T353-G ElectroHeat Plus MKIII 16kW Three Phase - Digital EPX021T251-G ElectroHeat Plus MKIII 21kW Single Phase - Digital EPX021T353-G ElectroHeat Plus MKIII 21kW Three Phase - Digital EPX025T251-G ElectroHeat Plus MKIII 25kW Single Phase - Digital EPX025T353-G ElectroHeat Plus MKIII 25kW Three Phase - Digital EPX031T353-G ElectroHeat Plus MKIII 31kW Three Phase - Digital EPX037T353-G ElectroHeat Plus MKIII 37kW Three Phase - Digital EPX037T353-G ElectroHeat Plus MKIII 44kW Three Phase - Digital

Nom. Size 16kW 16kW 21kW 21kW 25kW 25kW 31kW 37kW 44kW

Price € 5,936.13 € 5,936.13 € 6,743.69 € 6,743.69 € 7,147.47 € 7,147.47 € 7,822.44 € 8,846.95 € 10,196.89

Specifications Model 16 21 25 31 Nominal Heating Capacity (BTU/h)* 55,000 70,000 85,000 105,000 Power Output (kW) 16 21 25 31 Power Supply (Volt) 220 - 240 380 - 415 220 - 240 380 - 415 220 - 240 380 - 415 220 - 240 380 - 415 Supply Voltage Phase 1 Phase 3 Phase 1 Phase 3 Phase 1 Phase 3 Phase 1 Phase 3 Phase Power Consumption (kW/h) 4.3 4.2 4.0 4.3 5.4 5.3 5.9 5.8 Unit Running Amperage (Amp) 19.2 7.9 23.5 7.9 25 9.8 28.0 9.9 Fan Full Load Amperage (FLA) 0.9 0.9 0.9 1.45 Min-Max Breaker or Fuse 30 - 40 15 40 - 50 15 40 - 50 25 40 - 50 25 Noise level @ 3m in dB 58 58 59 60 Min-Max Air Temperature (C) 11 - 40 11 - 40 11 - 40 11 - 40 Weight (kg) 91 91 91 107

Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal’s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture.

37 125,000 37 380 - 415 3 Phase 6.0 11.8 1.45 25 61 11 - 40 149

44 150,000 44 380 - 415 3 Phase 7.6 13.1 1.45 25 61 11 - 40 152

* The heating capacity depends on water and ambient temperature, as well as humidity level. * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Water Flow & Plumbing Characteristics Ext. Field Install 6.7 - 18 m³/h 18º - 40º 1 ½” / 50mm - PVC

Water Bypass Type Min./Max. Water Flow Rate Min./Max. Water Inlet Temperature Plumbing Connection Size

Dimensions Model

A

B

C

ElectroHeat Plus MK III 55,70,85

780 mm

890 mm

870 mm

ElectroHeat Plus MK III 105,125,150

890 mm

880 mm

1120 mm

Clearance No obstruction above C

Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

Clearance 60 to 90 cm A

B

S av e t i m e , wat e r a n d e n e r g y.

101

Clearance 60 to 90 cm

Clearance 60 to 90 cm

Clearance 60 to 90 cm

Pool Heating - Heat Pumps

ELECTROHEAT ULTRA Part No. Product Description ESZ016T251-G ElectroHeat 16kW Single Phase - Ultra digital

The latest advancement in swimming pool heating. Electroheat Ultra heat pumps extracts latent heat from the surrounding air, intensifies it and transfers it to your swimming pool.

Electroheat Ultra heat pumps will heat your pool even when the ambient air temperature is near freezing point (0°C).

ElectroHeat 22kW Three Phase - Ultra digital

22kW

€ 8,868.14

ESZ022T353-G

ElectroHeat 22kW Single Phase - Ultra digital

22kW

€ 8,868.14

ESZ029T353-G

ElectroHeat 29kW Three Phase - Ultra digital

29kW

€ 8,963.76

ESZ035T353-G

ElectroHeat 35kW Three Phase - Ultra digital

35kW

€ 9,122.88

ElectroHeat Ultra heating ElectroHeat Ultra features an automatic hot gas deicing function. If any ice forms on the evaporator, the ElectroHeat Ultra’s pipe configuration is temporarily reconfigured via a reversing valve to allow hot gas to melt the ice, the ElectroHeat Ultra then reverts back to heating your pool.

• Temperature management & self-diagnosis • Automatic hot gas de-icing for cold climates

• Weather proof cabine

Specifications Models

Electroheat Ultra16kW

Electroheat Ultra 22kW

Electroheat Ultra29kW

Electroheat Ultra 35kW

55,000

75,000

100,000

120,000

16

22

29

35

Nominal Heating Capacity btu/h * Power Output (kW)

Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal’s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture.

Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

Price € 7,360.54

ESZ022T251-G

• Energy efficient heating

• High density titanium heat exchanger

Nom. Size 16kW

Supply Voltage (VAC)

220 - 240

220 - 240

380 - 415

380 - 415

380 - 415

Supply Voltage Phase

1 phase

1 phase

3 Phases

3 Phases

3 Phases

Power consumption (kW/h)

3.9

5.3

4.9

5.8

7.2

Unit Running Amperage

18.8

25.6

8.4

9.8

12.2

Fan Full Load Amp (FLA)

0.65

1.45

1.45 25

Min / Max Breaker or Fuse (AMP) Noise Level @ 3m in dB Min./Max. Air Inlet Temperature (C) Weight (kg)

1.45

30 - 40

40-50

25

25

56

57

57

59

60

0 - 40

0 - 40

0 - 40

0 - 40

0 - 40

90

90

77

88

* The heating capacity depends on water and ambient temperature, as well as humidity level * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Water Bypass Type Min./Max. Water Flow Rate Min./Max. Water Inlet Temperature Plumbing Connection Size

Water Flow & Plumbing Characteristics Ext. Field Install 6.7 - 18 m³/h 10º - 40º 1 ½” / 50mm - PVC

Dimension Ultra 16

Ultra 22

Ultra 29

Ultra 35

Width

780mm

890mm

890mm

890mm

Length

890mm

880mm

880mm

880mm

Height

870mm

1120mm

1120mm

1120mm

Weight S av e t i m e , wat e r a n d e n e r g y.

Ultra 16

Ultra 22

Ultra 29

Ultra 35

77kg

88kg

90kg

90kg

102

Pool Heating - Heat Pumps

ELECTROHEAT PLUS HEAT AND COOL Part No. Product Description EHC031T353-6D ElectroHeat Plus Heat + Cool 31kW EHC037T353-6D ElectroHeat Plus Heat + Cool 37kW

Nom. Size 31kW 37kW

Price € 9,888.25 € 10,189.52

Specifications

Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal’s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture.

Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

Models Electroheat Plus Heat & Cool 31kW Electroheat Plus Heat & Cool 37kW Nominal Heating Capacity btu/h * 105,000 125,000 Nominal Cooling Capacity btu/h * 52,000 79,000 Power Output (kW) 31 37 Supply Voltage (VAC) 380 - 415 380 - 415 Supply Voltage Phase 3 Phases 3 Phases Power consumption (kW/h) 5.8 7.2 Unit Running Amperage 9.8 12.2 Fan Full Load Amp (FLA) 2.3 2.3 Min / Max Breaker or Fuse (AMP) 25 25 Noise Level @ 3m in dB 60 61 Min./Max. Air Inlet Temperature (C) 11 - 40 11 - 40 Weight (kg) 125 130 * The heating capacity depends on water and ambient temperature, as well as humidity level * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Water Bypass Type Min./Max. Water Flow Rate Min./Max. Water Inlet Temperature Plumbing Connection Size

Water Flow & Plumbing Characteristics Ext. Field Install 6.7 - 18 m³/h 6°-40° 1 ½” / 50mm - PVC

Dimension Model Electroheat Heat & Cool 31 & 37

Width 890mm

Length 876mm

Height 1130mm

Heat-Cool units have a reversing valve which enables the heat pump to not only heat up the water, but also to cool down the water during the hot summer months. Normally, a heat pump will gather heat energy from the air with its evaporator coil. Using refrigerant and several other components, the heat is transferred over to the pool water. By reversing this process the heat pump can actually take heat out of the water, transfer it to the refrigerant, and run it through the evaporator coil. The coil dissipates the heat into the air.

S av e t i m e , wat e r a n d e n e r g y.

103

Pool Heating - Heat Pumps

GEYSER Part No. GEY012T251 GEY015T251 GEY019T251R GEY023T251R

Product Description Geyser XL 12kW Single Phase Geyser XL 15kW Single Phase Geyser XLR 19kW Single Phase (Quick defrost cycle) Geyser XLR 23kW Single Phase (Quick defrost cycle)

Nom. Size 12kW 15kW 19kW 23kW

Price € 2,866.50 € 3,252.60 € 4,212.00 € 4,446.00

Specifications Models Nominal Heating Capacity btu/h * Power Output (kW) Supply Voltage (VAC) Supply Voltage Phase Power consumption (kW) Unit Running Amperage Water Connections Min / Max Breaker or Fuse (AMP) Quick Defrost Cycle

S av e t i m e , wat e r a n d e n e r g y.

GEY040RT261 - XL

GEY050RT261 - XL

40 000 BTU’s

50 000 BTU’s

65 000 BTU’s

80 000 BTU’s

11.74 208 - 230 1 phase

13.52 208 - 230 1 phase

18.54 208 - 230 1 phase

21.82 208 - 230 1 phase

1.93

2.10

2.99

3.00

Dimension Weight (kg)

GEY065RT261 - XLR GEY080RT261 - XLR

9.1

9.3

15.28

21.20

1½ in /50mm

1½ in /50mm

1½ in /50mm

1½ in /50mm

20

20

30

40

– 46 x 27 x 12.5 in 117 x 68.5 x 32 cm 54

– 46 x 27 x 12.5 in 117 x 68.5 x 32 cm 54

Active 46 x 27 x 12.5 in 117 x 68.5 x 32 cm 78

Active 46 x 27 x 12.5 in 117 x 68.5 x 32 cm 78

* The heating capacity depends on water and ambient temperature, as well as humidity level. * Information for reference only, results may vary depending on the region, temperature and the use of a solar blanket * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Main Features

New digital control which instantly displays any diagnosis in the unit and enables a fast and efficient service.

Titanium double coil heat exchanger: With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

Noise Reduction Components

Extra large evaporator surface collects more heat from the ambient air, which allows better performance of the unit and ensures a greater heat transfer to the pool.

Quick defrost cycle by the inversion of the cooling circuit, which allows a complete and quick defrost cycle (2 mins). This option allows the pool to be hea5ted at a lower ambient temperature

Water circulation guide within the TITANIUM heat exchanger increases water turbulence and velocity, thus providing maximum thermal transfer.

Profile fan blades increase air flow and therefore performance while reducing noise.

Scroll type compressor producing 10 dB less noise than other brands available on the market.

GEY040R and GEY050R Rotary Compressors

104

Pool Heating - Heat Pumps

AQUAFLOW Part No. AFX019T251-G AFX019T353-G AFX023T251-G AFX080T3530

Product Description Aquaflow 19kW Single Phase - Digital Aquaflow 19kW Three Phase - Digital Aquaflow 23kW Single Phase - Digital Aquaflow 23kW Three Phase - Digital

Nom. Size 19kW 19kW 23kW 23kW

Price € 4,147.73 € 4,240.02 € 4,696.16 € 4,806.48

Specifications Models Nominal Heating Capacity btu/h * Power Output (kW) Supply Voltage (VAC) Supply Voltage Phase Power consumption (kW/h) Unit Running Amperage Fan Full Load Amp (FLA) Min / Max Breaker or Fuse (AMP) Noise Level @ 3m in dB Min./Max. Air Inlet Temperature (C) Weight (kg)

AquaFlow 19 65,000 19 220 - 240 380 - 415 1 Phases 3 Phases 4.2 4.2 17.8 7.6 0.65 25 15 57 11 - 40 89

AquaFlow 23 80,000 23 220 - 240 380 - 415 1 phase 3 Phases 6.4 6.6 24.8 20 0.65 40 20 57 11 - 40 89

* The heating capacity depends on water and ambient temperature, as well as humidity level. * Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Water Flow & Plumbing Characteristics Ext. Field Install 6.7 - 18 m³/h 14º - 40º 1 ½” / 50mm - PVC

Water Bypass Type Min./Max. Water Flow Rate Min./Max. Water Inlet Temperature Plumbing Connection Size

Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

Dimensions Model

A

B

C

Aquaflow 19

920 mm

610 mm

860 mm

Aquaflow 23

920 mm

610 mm

860 mm

Main Features

A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metal’s corrosion resistance is due to a stable, protective, strongly adherent oxide film. This film forms instantly when a fresh surface is exposed to air or moisture.

C

B A

Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

Clearance

Clearance 60 to 90cm S av e t i m e , wat e r a n d e n e r g y.

New digital control which instantly displays any diagnosis in the unit and enables a fast and efficient service.

Clearance 60 to 90cm

Clearance 60 to 90cm

Clearance 60 to 90cm

105

Water circulation guide within the TITANIUM heat exchanger increases water turbulance and velocity, thus providing maximum thermal transfer.

Noise Reduction Components Scroll type compressor producing 10 dB less than other brands available on the market.

Pool Heating - Heat Pumps

ELECTROHEAT PRO Part No. Product Description WSC330T353N Electroheat Pro 96kW

Nom. Size 96kW

Price â&#x201A;Ź 24,453.48

Electroheat Pro Commercial heat pump The largest of the Electroheat range our 96kW commercial unit has been designed to offer maximum output and reliability in a commercial setting.

The heat pump cabinet is constructed using high gauge powder coated metal sheet ensuring a high quality finish and sturdy con-struction. The ultra rigid metal base incorporates forklift access thus reducing the risk of damage during transport and allowing for ease of installation once on site.

Double Coil Titanium Heat Exchanger With much greater surface area and longer contact time, this Waterco innovation allows higher heat transfer, thus delivering some of the highest efficiencies in its class.

A Titanium Heat Exchanger offers total protection against erosion and corrosion. Titanium metalâ&#x20AC;&#x2122;s corrosion resistance is due to a stable, protective, strongly adherent oxide film.

This film forms instantly when a fresh surface is exposed to air or moisture.

Titanium is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water.

S av e t i m e , wat e r a n d e n e r g y.

106

Pool Heating - Heat Pumps

Two ½HP fan motors power the two 4-blade 26” fans that provide high volume air flow to the twin evaporators.

The Electroheat Pro boasts innovative design solutions, such as the dual 11HP Sanyo Scroll compressors (380-415V/50Hz/3ph), and the control panel which monitors the functioning of both compressors individually, as well as monitoring the 3 phases.

Specifications Electroheat Pro 96 330,000 96 380 - 415 3 Phases 16.12 30 Amp 2.4 Amp 50/60 59 6 - 40 453

Nominal Heating Capacity btu/h * Power Output (kW) Supply Voltage (VAC) Supply Voltage Phase Power consumption (kW/h) Unit Running Amperage Fan Full Load Amp (FLA) Min / Max Breaker or Fuse (AMP) Noise Level @ 3m in dB Min./Max. Air Inlet Temperature (C) Weight (kg)

* Waterco Heat Pump performance metrics were obtained during laboratory testing conducted in Canada to the requirements of ASHRAE Standard 146-2011, and ANSI/AHRI Standard 1160: (I-P)-2009 in conditions of 26° Air/63% RH/ 26° Water.

Dimensions Model Electroheat Pro

A

B

C

1730 mm

1090 mm

1120 mm

Clearance

Clearance 60 to 90cm

Clearance 60 to 90cm

C

Clearance 60 to 90cm

A

Clearance 60 to 90cm

107

B

Pool Heating - ZANE Solar Heating

Zane Solar

effectively captures the sun’s energy to heat your pool

Madreailnia Aust

ZX3000

The ZX3000 controller has revolutionised solar pool heating systems. This state-of-the-art computerised solar controller can control both the filter and the solar systems for your pool or spa.

The ZX3000 also has the ability to control extra heating equipment to work in conjunction with the solar system e.g. gas heater, heat pumps.

PC5

The PC5 computerised solar controller has an auto-off and manual switch with a “top out” temperature control, winter mode and digital temperature readout.

Solar Booster pumps

Flocheck valve

The Zane Flocheck valve is integrated with the solar controller and will stop the solar pump if the pool filtration pump is not working.

108

Zane Solar systems require efficient circulation to function at its peak performance. For this reason, we use a specially designed range of Aquastream Solar Booster pumps incorporating the essential features required to make them compatible with Zane Solar systems.

Pool Heating - Zane Solar Heating Gulfpanel GULFPANEL KITS Part No. Product Description 8642300 Gulfpanel - 600mm wide 8642000 Gulfpanel - 600mm wide 8641700 Gulfpanel - 600mm wide 8640800 Gulfpanel - 600mm wide

Panel length 3.9 m 3.4 m 2.9 m 1.4 m

Ctn Qty 6 6 6 15

Price € 215.33 € 181.08 € 168.45 € 101.08

Zane Solar Gulfpanel Extensive research, development and testing have gone into the refinement of Zane Solar Gulfpanel.

Gulfpanels are precision injection moulded from a high grade formulated polymer, selected for its outstanding heat transfer properties and its exceptional durability.

Gulfpanels are UV stabilised and designed to withstand extreme weather conditions.

S av e t i m e , wat e r a n d e n e r g y.

Gulfpanel’s modular design allows the creation of a solar system, which is easily adaptable to a variety of roof configurations.

Each Gulfpanel consists of a multitude of miniature solar absorber tubes to maximise its surface area exposed to the sun.

The solar absorber’s thick circular wall structure is impervious to attacks from birds and vermin.

Gulfpanel’s seamless one piece construction eliminates any welds or seams, ensuring long lasting performance.

The modular panels are connected together via reinforced water tight unions without the need for gluing or the use of clamps, guaranteeing a robust leak free connection.

Gulfpanels are securely fastened to the roof via a series of custom built roof clamps designed to allow for expansion and contraction of the Gulfpanels

109

Pool Heating - Zane Solar Heating Gulfpanel

Manifold Coupling Threaded

GULFPANEL EQUIPMENT Part No. Product Description 8640030 Manifold Coupling Threaded 630320 Half Union Nut 8640040 Threaded End Plug 12642 Black End Cap 6340248 Half Union Assembly 630322 Black Tail Threaded End 8640010 Manifold Clamp Set 8640050 Tube Support 600 8640060 Tube Support Joiner

Price € 5.51 € 5.94 € 3.67 € 4.05 € 12.15 € 2.22 € 7.00 € 3.50 € 3.06

Half Union Nut

Threaded End Plug

Tube Support Joiner

Black End Cap

Tube Support Joiner

Half Union Assembly

Manifold Clamp Set

110

Black Tail Threaded End

Pool Heating - Zane Solar Heating Controllers Part No. 85109 85190EU 85111 85112 85107 85120

Product Description ZX3000 Controller PC5 Controller Weatherhood - ZX3000 Extension Harness - 15m ZX3000 Gas Heater Kit Timer - Solar pump interrupt

Nom. Size Each Each Each Each Each Each

Price € 673.84 € 408.78 € 45.20 € 121.98 € 58.10 € 236.66

Spare Parts Part No. Product Description 85174 Power Pack - ZX3000 85175 Harness - ZX3000 85176 PC Board - ZX3000 85179 PC Board - ZX3000 c/w battery connection 85167 Pool Probe Replacement kit 85173 Probe Cable - ZX3000 & PC2/3/4 851770 Control Board - ZX3000 c/w base & lead - PC3 85180 Control Board - ZX3000 c/w base & lead - PC4 85541 Valve Stem - ZX3000 & PC2/3/4 85526 Flocheck Flapper Assembly 1½” 85527 Flocheck Flapper Assembly 2”

Nom. Size Each Each Each Each Each Metre Each Each Each Each Each

Price € 209.78 € 53.27 € 408.78 € 414.14 € 39.29 € 2.17 € 398.05 € 398.05 € 48.21 € 18.04 € 32.30

Flexilock Fittings Part No. Product Description 85251 Plugs 85254 Joiners 861811 Sleeves - Domestic 85257 Sleeves - Commercial

Nom. Size Pk 520 Pk 520 Pk 520 Pk 520

Price € 96.48 € 77.86 € 77.86 € 77.86

111

Pool Heating - Electric DIGIHEAT ELECTRIC HEATERS Part No. Product Description Digiheat - 2.4 kW 281024 Digiheat - 3.6 kW 281036 Digiheat - 4.8 kW 281048 Digiheat - 6.0 kW 281060 Digiheat - 18.0 kW 281183 Digiheat - 24.0 kW 281243

Price € 603.60 € 635.42 € 703.31 € 851.82 € 1,654.85 € 1,854.28

Specifications DigiHeat Model

Volts

Current Draw

Minimum Circuit Size

Connection Size

281024

2.4 kW

240 Volts (single phase)

10 A

15 A

1½” / 50mm

281036

3.6 kW

240 Volts (single phase)

15 A

20 A

1½” / 50mm

281048

4.8 kW

240 Volts (single phase)

20 A

25 A

1½” / 50mm

281060

6.0 kW

240 Volts (single phase)

25 A

30 A

1½” / 50mm

281183

18.0 kW

415 Volts (three phase)

25 A / phase

30 A/phase

2” / 63mm

281243

24.0 kW

415 Volts (three phase)

35 A / phase

40 A/phase

2” / 63mm

Code

Digiheat inline electric heaters are versatile, easy to use and built to last. Program your desired water temperature and let Digiheat do the rest.

• Digital temperature management & self diagnosis • Corrosion resistant heating element • Streamline weather proof housing • Available in sizes 4.8, 6.0,18 & 24 kW

Single Phase

Complies with EN60335.260 and AS3136/NZS6232 Model kW

Time required to heat 1000 litres by 1 deg C in minutes:

Time required to heat 1000 litres by 5 deg C in minutes:

2.4kW 3.6kW 4.8kW 6kW 18kW 24kW

30 26 22 18 6 5

150 128 108 87 29 22

*The above is a only a guide and is dependent upon other factors such as heat loss and ambient conditions at the time of operation.

Dimensions Single phase model 312

332

Available in sizes 2.4, 3.6, 4.8 & 6.0 kW for single phase 240Volts

Three Phase

161

469

Three phase model 161

240

273

594

Available in sizes 18 & 24 kW for 3 phase 415Volts

267

736

112

Spa Equipment & Accessories 113

www.waterco.eu

Waterco Spa Equipment

Spa Equipment & Accessories TOP LOAD NICHE FILTER Part No. Product Description 4555250 Top Load Filter 50 sq ft 45552505 Top Load Filter 50 sq ft 4555275 Top Load Filter 75 sq ft AF1060 Top Load Niche and Lid - White AF1066 Top Load Niche Lid only - Grey AF1063 Top Load Niche and Lid - Black AFI062 Top Load Filter Base

Nom. Size 1½” connectors 2” connectors 1½” connectors

Price € 143.60 € 155.18 € 172.56 € 18.09 € 18.09 € 18.09 € 7.80

C A

B

Model C50 C75

Filter Area (sq. m) 4.6 6.9

Model C50 C75

Maximum Flow (m3/hr) 11.4 16.5

A 75mm 75mm

Working Pressure 3.5 BAR / 51PSI 3.5 BAR / 51PSI

B 385mm 640mm

Maximum Temperature 40oC 40oC

C 205mm 205mm

WATERCO SPA LIGHT Part No. Product Description ASP077 Spa Light - 12volt c/w transformer - rear access ASP078 Spa Light - 12volt c/w transformer - front access

Nom. Size

Price € 122.37 € 122.37

91mm

46mm

Ø87mm

Transformer Input 240V, Cycle 50 Hz 64mm

Output 12V ac, 42 va

Fuse 4 amp delay

Globe Type Globe Output Ozram Decostar 35 watt/ 20 ALU bi pin globe watt

SPA BLOWERS Part No. Product Description 282410 Airflo Blower - CE 282401 Whisperair Blower - CE 282421 Whisperair S Blower c/w airswitch - CE Size 225 x 280 x 360

Power 900 watt

Voltage 240AC

Nom. Size 900W 900W 900W Weight 3.7kg

Price € 312.05 € 369.60 € 443.47 Suction 2” hpvc

Safety flow ‘n’ loops required in installation.

• Whisper quiet operation • Hi-flow air movement • Compact design • Variable mounts

Compact Design The compact design of the Waterco spa blower enables installation in smaller areas and tight corners. The convenient position of the mounting base and air inlet/outlets reduces installation time and cost.

Thermal Cutout Waterco spa blowers feature an important safety feature, an integral thermal cutout. This cutout stops the electric motor if it becomes excessively warm. This cutout does not require manual resetting and will automatically restart the motor when it is sufficiently cooled.

114

Spa Equipment & Accessories Air Injection systems Part No. Product Description Portable Spa Air Injection Systems ASF618 Air System 18 Injector c/w Hose & Manifold - White ASF624 Air System 18 Injector c/w Hose & Manifold - Chrome ASF668 Air Jets only - White ASF670 Air Jets only - Chrome ASF672 Air Jets Only - Gold ABS

Price € 197.09 € 221.73 € 10.71 € 12.36 € 11.81

ASF618, ASF624

5mm

50mm

28mm

ASF668, ASF670, ASF672

AIR INJECTION SYSTEMS Part No. Product Description ASF242 Air Injector - White Concrete Self Set

115

Nom. Size

Price € 7.27

Spa Equipment & Accessories Inground / Portable Spa Air System Components Part No. Product Description AC1809 Aus Flow Air Injector Top - White AC1821 Aus Force Air Injector Top - White AS&P364 Aus-Stream Air Injector - White (Other colours available) ASP215 S & P Air Injector White (Top, Body & Clamp) ASP210 S & P Air Injector Grey (Top, Body & Clamp) AC1776 Air Injector Body only AC1434 S & P Injector Top only White AC1777 Aus Stream Top only White AC2028 S & P Injector Top only Grey AC643 Manifold Section 3 Barb x 9mm AC655 Adaptor Bush for Manifold AC1045 End Cap for Manifold

Price € 0.62 € 0.62 € 3.05 € 3.05 € 3.05 € 1.47 € 0.78 € 0.78 € 0.78 € 1.24 € 0.71 € 1.06

40mm

46mm

25mm

60mm

AC1776

26.5mm

25.5mm

37mm 25.5mm

AC1809

26.5mm

25.5mm

37mm 25.5mm

AC1821

26.5mm

25.5mm

34mm 25.5mm

AC1434, AC2028

116

26mm

25.5mm

37.5mm 25.5mm

AC1777

Spa Equipment & Accessories SPA JETS, SUCTIONS & FITTINGS Air Controls S & P Part No. Product Description ASF102 Standard Air Control - White (Other colours available)

Price € 5.50

38mm 5mm

49mm

ASF102,

26mm

Air Buttons S & P Part No. Product Description ASF202 Air Button Low Profile - White (Other colours available)

Price € 8.87

5mm

70mm

ASF202, ASF218, ASF219, ASF220, ASF222

35mm

Spa Jets, Self Draining Spa Bath Jets, Jet Bodies S & P Part No. Product Description ASF388 Compact Jet Body 25mm Double Manifold for Ultra Faceplates

Price € 6.03

AS&P400

€ 6.03

Compact Jet Body 25mm Double Manifold for Adjustable Faceplates

33.85 41mm

127mm

90mm

65mm

60mm

48mm

AS&P400

ASF272

117

Price € 5.32

75mm

17mm

Jet Faceplates Part No. Product Description ASF296 S&P Adjustable Faceplate - White (Other colours available)

Spa Equipment & Accessories REGENCY DIRECTIONAL ADJUSTABLE FACEPLATES Part No. Product Description ASP538 Regency Adjustable Faceplate 5 Grip - Gold ABS

Price € 16.32

66mm

6mm

11

Inbuilt 9mm - /32" nozzle = 38 LPM / 10US GPM / 8.2 IMP GMP flow @90 KPA / 12 P.S.I - 6 & 8mm - tapered push in nozzles available # AC2105 (6mm) / AC2106 (8mm)

62mm

ASP538

Manifolds & Fittings Part No. Product Description AC655 Air Manifold Reducing Bush AC643 3 Barb x 9mm Barbed Air Manifold Section AC1045 Air Manifold End Cap ASP520 40mm x 2 Port 19mm Barbed Manifold ASP521 Cap for 19mm Barb ASP522 Ribbed Barb 2” nominal pipe 2 port piggy back water manifold ASP523 Smooth Barb 2” nominal pipe 2 port piggy back water manifold

Price € 0.71 € 1.24 € 1.06 € 3.55 € 0.71 € 4.43 € 4.43

19mm

33.7mm

25mm

27mm

30mm

85mm

48.3mm

56mm

48.5mm

30mm

45mm

ASP521

AC655

28mm

27mm

60.8mm

52.5mm

9mm

60.2mm

68.8mm

27mm

19mm

55mm

ASP522

AC643

76.4mm

Accessories Part No. Product Description AZSF066 25mm Non Return Valve ASP082 10mm internal Cap/Air line plug T body ASP198 Spanner All Jets

Price € 14.28 € 0.75 € 1.99

AZSF066

118

50mm

33.8mm

27mm

69mm

Spa Equipment & Accessories PVC Adaptors & Caps Part No. Product Description ASP068 Socket to Flexi Adaptor Barb 1/2”x 3/8” ASP057 Socket to Flexi Adaptor Barb 1” x 3/4” Flexi Hose and Clamps AZSF952 20m x 9mm White Hose AS&P242 100m x 9mm Clear Hose AS&P412 30m x 19mm Clear Hose AC1785 Hose Clamp 9mm AC1796 Hose Clamp 19mm ASP083 Hose Clip 25mm x 9mm

Price € 1.07 € 1.43 -

ASP068

ASP057

38mm

33.6mm 27.1mm

25mm

21.4mm

11mm

20mm

26.6mm

38mm

20mm

Spa Suction Fittings and Skimmers Part No. Product Description 45348 Waterco Slip Fit White ASF508 Compact Suction c/w Elbow - White (Other colours available) ASF480 Supa Suction - White (Other colours available)

Nom. Size 1½”

Price € 10.73 € 12.41 € 7.98

1½”

117mm

60mm

100mm 30mm

48.3mm

ASF508

56mm 59mm

30mm

100mm

20mm

ASF48

47mm

SPA SUCTION FITTINGS & SKIMMERS S&P Part No. Product Description ASF523 Suction with back nut, glue fit 40mm - White* ASF080 Strip Skimmer - White*

Price € 8.96 € 16.14

96mm

59.5mm

48.3mm 59mm

ASF523, ASF574, ASF576, ASF567, ASF568

119

94mm

110mm

ASF080, ASF096

90mm

48mm 30mm

100mm

Spa Equipment & Accessories Specialty Spa Fittings S & P Part No. Product Description ASF274 Ultra Pool Return ASF580 Flanged Faucet Elbow 40mm ASF602 Flanged Faucet Socket 40mm ASF612 Spa Tee 40mm x 25mm x 25mm AC700 Internal End Cap 25mm AC703 Internal End Cap 40mm AZPV100 Threaded Cap 25mm AS&P338 Hand Rail - Powder Coated AS&P071 Hand Rail 301/400mm - Stainless Steel AS&P067 Hand Rail 301/400mm - Gold (Other sizes available on request) AC1787 Clear Grommet

Price € 5.94 € 7.45 € 4.26 € 3.02 € 0.62 € 0.62 € 2.22 € 76.84 € 16.40 € 51.25

25mm

75mm

€ 0.62

57.5mm 72mm

AC580

70mm

68mm 46mm

48.3mm 56mm

ASF602

120

96mm

45mm 48.3mm

76mm

ASF274

Aquaculture 121

www.waterco.eu

Waterco Aquaculture

Aquaculture Lacron Pond Master System

AQUABIOME BEAD FILTER PACKS - Combined Mechanical and Biological Filtration Pond Master Bead Filters Part No. Product Description Price 22201605 Lacron 16” Bead Pond Filter Pack 1½” MPV € 1,696.04 Lacron 20” Bead Pond Filter Pack 1½” MPV c/w Eze Flo system 22202007 € 1,902.53 22202407 Lacron 24” Bead Pond Filter Pack 1½” MPV c/w Eze Flo system € 2,295.91 22203007 Lacron 30” Bead Pond Filter Pack 2” MPV c/w Eze Flo system € 2,793.00 222036PFP Lacron 36” Bead Pond Filter Pack 2” MPV c/w Eze Flo system € 4,170.36 3532520

Waterco 20kg Bio Mec Bead Media (20kg)

€ 152.76

Waterco Premium Bio Mec filter media is available in 20kg bags and ideally suited with any of the Waterco bead filtration systems. Manufactured from high quality, virgin plastic ensures a filter bead of the highest standards to ensure an excellent standard of filtration.

Bio Mec Bead Media

Choosing the correct size Bio-Mec for your pond The following is the list of specifications for the size range: Filter Diameter Size Filter Surface Area m2 Media Volume in kg Min - Maximum Flow Rate m3 /hr Pond Size m3 Pond size gallons

16” 0.16 20 3-6 12.0 2640

20” 0.2 30 5 - 10 20.0 4400

24” 0.3 60 7 - 15 36.0 7920

30” 0.45 80 14 - 24 60.0 13200

36” 0.66 100 20 - 36 90.0 19800

The Aquabiome range of Pond Filter Packs have been specifically engineered for pond & water gardens.

Aquabiome provides mechanical filtration, biochemical oxygen demand (BOD) reduction in a single housing that includes a specifically engineered lateral and slotted collector system. All systems are supplied complete with Filter, 6 way MPV, pipework, valve, blower and base.

Waterco Eze Flo system - new for 2013

For 2013 Waterco are pleased to release the Eze Flo plumbing system as a standard feature on the 20”, 24”, 30” and 36” Aquabiome Pond Master Bead filter systems.

The Eze Flo feature enables a lower wattage pump to be used and by reducing the head loss of the system in turn saves money by reducing electricity bills.

The Eze Flo system can save up to 30% pressure loss and running costs by simply eliminating the need for the Multiport Valve on the standard filtration cycle.

122

Aquaculture Pond Professional Bead Filter - Combined Mechanical and biological Filtration Part No. Product Description 220008248 Exotuf Pond Profesional Bead Filter

Filter Diameter size mm 24” / 600mm

Filter Surface area m² 0.3

Media volume kgs 60

MinimumMaximum flow rate

Pond size m³ 36.0

7-16

Price € 964.41

Pond size gallons 7920

The Exotuf Pond Professional Bead Filter is specially engineered for the Koi enthusiast with ponds up to 7920 gallons in size.

A pre-plumbed unit which is compact in design, making the Exotuf Pond Professional an ideal choice for the Koi hobbyest.

Bio-Mechanical Filtration Aquabiome

Mechanical filtration Flow check valve

Mechanical filtration physically removes solids from the pond by trapping solids between the crevices of the filter media.

Biological filtration

Backwash sight glass Six position Multiport valve Pressure gauge

To Waste

8” clear polycarbonate lid

From Pond

Slotted collector

To Pond

0.4mm – 0.5mm Biofilter media

Bio filter media

Up Flow Flow

Air assisted backwash

UV and corrosion resistant fibreglass filter vessel Drain port Hydraulically efficient slotted (1.5mm) laterals Air blower Sturdy filter skid base

Biological filtration is the most effective method of removing toxins (ammonia) and breaking it down into nitrites and then into nitrates which provide food to your aquatic plants (referred to as the Nitrogen Cycle). This is accomplished by using naturally occurring bacteria and giving it a place to live in the Biofilter media where it is exposed to large quantities of food and oxygen.

Nitrogen Cycle

The cycle begins when fish eat and then excrete ammonia.

Bacteria in the biological filter eats the ammonia and excretes nitrite. Nitrite is also toxic to fish and needs to be removed.

Another type of bacteria in the filter eats nitrite and excretes nitrate. Nitrate is non-toxic to fish in small quantities and is used by plants as fertilizer. The entire cycle then repeats itself upon completion.

Food

Waste products Uneaten food Decomposition by fungi and bacteria

Plant fragments, dead animals, etc Incorporated into plant protein

1. Water is pumped to the Multiport valve and diverted to the lower filter.

2. The inflowing water is then evenly dispersed through slotted laterals within the lower section of the filter.

3. As the water flows upwards through the Biofilter media, the contaminated water is subjected to mechanical and biological filtration.

AMMONIA (NH3/NH4*) Oxidation by Nitrosomonas bacteria FREE NITROGEN (N2)

123

Aerobic conditions Oxidation by Nitrobacter bacteria

NITRATES (NO3–)

NITRITES (NO2–) Anaerobic conditions Reduction by anaerobic denitrifying bacteria

Aquaculture

CENTRIFUGAL WATER FILTRATION WATERCO MULTICYCLONE FILTER Part No. Product Description 200375 MultiCyclone MC16 200374 MultiCyclone MC12 200372 MultiCyclone Base MKII (optional) 2003730 MultiCyclone over-pump stand (optional)

Nom. Size 2” / 63mm 11/2” / 50mm

Price

NB: For pricing please see: filters page 22

Quick fit unions S av e t i m e , wat e r a n d e n e r g y.

UV and corrosion proof Incoming water enters hydrocyclones tangentially, generating a strong centrifugal effect. The sediment is spun out to the hydrocyclone’s wall, and then spirals down to the sediment chamber. The filtered water migrates towards the centre of the hydrocyclone where the flow reverses and spirals upwards through the outlet. Accumulation of sediment can be visibly monitored through the MultiCyclone’s clear sediment chamber.

Multiple hydrocyclones

The MultiCyclone is easily cleaned by opening the valve. Only 15 litres of water is discharged to cleanse the MultiCyclone.

Hydraulically efficient design

Glass filled reinforced thermoplastic Lock ring

MultiCyclone is easy to install and fits to most existing pond filtration systems. There are no moving parts to wear out and replace and it’s backed by Waterco’s 2 year warranty.

32mm / 1” sediment purge valve Clear poly carbonate sediment bowl

Note: The MultiCyclone is designed to filter sediment that is heavier than water. Floating debris cannot be filtered out by centrifugal filtration.

124

Aquaculture FIBREGLASS FILTRON VORTEX CHAMBERS Part No. Product Description VOR2500MER Vortex Chamber - 2.500 Gallon Pond VOR4000 Vortex Chamber - 4,000 Gallon Pond VOR4002 Vortex Chamber - 8,000 Gallon Pond

Price € 408.70 € 424.90 € 466.18

These units are the most popular vortex chambers largely due to the high quality construction and design features. Manufactured from fibreglass with a gel coated internal finish, along with the addition of woven fibreglass matting, ensuring a chamber of the highest quality and strength. The large base ensures that the unit remains stable and the 2” x 4” pipe work means that the incoming pond water is sent swirling in the chamber and the large particle matter settles at the bottom where it can be discharged through a waste valve. The vortex chambers are available in 3 sizes to suit 2,500, 4,000 and 8,000 gallon ponds.

A

C

B

Model

gallon/hr

VOR 2500

1000 - 500

VOR 4000

1500 - 2000

VOR 8000

2000 - 3000

Dimensions (mm) Model VOR 2500

D

A

B

C

D

700 mm

735 mm

600 mm

440 mm

VOR 4000

795 mm

980 mm

850 mm

520 mm

VOR 8000

1040 mm

1180 mm

1035 mm

580 mm

WATERCO AQUAMITE PUMPS - Single Phase 220v - 240v, S/S shaft, CE approved Part No. Product Description Q. Max P. Max 1½” port supplied with 1½” imperial & 50mm metric quick connect unions Pump Warranty - 3 years wet end, 2 years motor and 1 year mechanical seal 2402033AUM Aquamite 033 11.3m³/hr 0.53kW 2402050AUM Aquamite 050 14.4m³/hr 0.58kW 2402075AUM Aquamite 075 16.8m³/hr 0.65kW 2402100AUM Aquamite 100 19.8m³/hr 0.76kW 2402125AUM Aquamite 125 22.2m³/hr 0.88kW Price and availability for TUV approved models available on request

Price

NB: For pricing please see: Pumps page 63

BLOWERS Part No. 282410 282401 282421

Product Description Airflo Blower 900W - CE Whisperair Blower 900W - CE Whisperair S Blower c/w airswitch 900W - CE

Price

NB: For pricing please see: Spa Equipment & Accessories page 114

Size 225 x 280 x 360

Power 900 watt

Voltage 240AC

Weight 3.7kg

Suction 2” hpvc

Safety flow ‘n’ loops required in installation.

125

Aquaculture DIGIHEAT ELECTRIC HEATERS Part No. Product Description Digiheat - 2.4 kW 281024 Digiheat - 3.6 kW 281036 Digiheat - 4.8 kW 281048 Digiheat - 6.0 kW 281060 Digiheat - 18.0 kW 281183 Digiheat - 24.0 kW 281243

Price

NB: For pricing please see: Pool Heating - Electric p112

Specifications DigiHeat Model

Volts

Current Draw

Minimum Circuit Size

Connection Size

281024

2.4 kW

240 Volts (single phase)

10 A

15 A

1½” / 50mm

281036

3.6 kW

240 Volts (single phase)

15 A

20 A

1½” / 50mm

281048

4.8 kW

240 Volts (single phase)

20 A

25 A

1½” / 50mm

281060

6.0 kW

240 Volts (single phase)

25 A

30 A

1½” / 50mm

281183

18.0 kW

415 Volts (three phase)

25 A / phase

30 A/phase

2” / 63mm

281243

24.0 kW

415 Volts (three phase)

35 A / phase

40 A/phase

2” / 63mm

Code

Digiheat inline electric heaters are versatile, easy to use and built to last. Program your desired water temperature and let Digiheat do the rest.

• Digital temperature management & self diagnosis • Corrosion resistant heating element • Streamline weather proof housing • Available in sizes 4.8, 6.0,18 & 24 kW

Complies with EN60335.260 and AS3136/NZS6232 Model kW

Time required to heat 1000 litres by 1 deg C in minutes:

Time required to heat 1000 litres by 5 deg C in minutes:

2.4kW 3.6kW 4.8kW 6kW 18kW 24kW

30 26 22 18 6 5

150 128 108 87 29 22

*The above is a only a guide and is dependent upon other factors such as heat loss and ambient conditions at the time of operation.

Single Phase Dimensions Single phase model 312

332

Available in sizes 2.4, 3.6, 4.8 & 6.0 kW for single phase 240Volts 161

469

Three Phase

Three phase model 161

240

273

594 267

Available in sizes 18 & 24 kW for 3 phase 415Volts 736

126

Water Treatment 127

www.waterco.eu

Waterco Water Treatment

Purification Systems - Point of Use GRAVITY WATER PURIFIERS Part No. Product Description 36410120 Stoneware Purifier 12 Litre (Incl. Dome Ceramic Cartridge) 36410130 Stoneware Purifier 12 Litre Plus (Incl. Dome Ceramic Cartridge & CZR) 36410008 Stoneware Purifier 8 Litre (Incl. Gravity Ceramic Cartridge) 36410009 Stoneware Purifier 8 Litre Plus (Incl. Gravity Ceramic Cartridge & CZR) 36410006 Clearware Purifier 6 Litre (Incl. Gravity Ceramic Cartridge) 36410007 Clearware Purifier 6 Litre Plus (Incl. Gravity Ceramic Cartridge & CZR) 36410150 Porcelain Purifier 10 Litre (Incl. 2 x Gravity Ceramic Cartridge)

Stoneware Purifier 12L

Stoneware Purifier 8L

Clearware Purifier 6L

Porcelain Purifier 10L

Gravity Ceramic Cartridge

Dome Ceramic Cartridge

REPLACEMENT FILTER CARTRIDGES (GRAVITY PURIFIERS) Part No. Product Description 3648040 Gravity Cartridge -single unit 3648070 Dome Ceramic Cartridge - single unit 7743809 CZR Cartridge

CZR Cartridge

128

Price € 180.81 € 216.90 € 147.91 € 182.41 € 95.33 € 129.82 € 160.77

Price € 27.60 € 35.79 € 36.27

Purification Systems - Point of Use TOP MOUNT MICRON W SERIES WHOLE OF HOUSE FILTER Part No. Product Description Backwashable Deep Bed granular filters C/W 1½” 5 Way MPV 2247251 Micron W250 Mk11 (7 Bar) 22473011 Micron W300 Mk11 (7 Bar) 22473571 Micron W350 (6 Bar) 2247400 Micron W400 (6 Bar) 2247500 Micron W500 (6 Bar) 22476071 Micron W600 (6 Bar) 2247700 Micron W700 (6 Bar)

Filter Bed Depth Filter Model (mm) Area (m2) W250 W300 W350 W400 W500 W600 W700 Model W250 W300 W350 W400 W500 W600 W700

600 600 600 600 600 600 600 A 1385 1366 1397 1377 1415 1402 1407

0.05 0.07 0.10 0.13 0.20 0.28 0.38

Valve Size (mm/ inch) 40/1.5 40/1.5 40/1.5 40/1.5 40/1.5 40/1.5 40/1.5

B 268 322 366 416 518 620 720

Wat. flow 24m3/hr/m2 (m3/ hr)

Com. flow 36m3/hr/m2 (m3/ hr)

1.70 1.68 2.28 3.00 4.74 6.78 9.20

1.80 2.50 3.48 4.50 7.08 10.20 13.86

C 304 346 355 355 443 540 540

D 160 160 160 160 160 160 160

E 1119 1100 1130 1100 1148 1135 1140

F 1252 1233 1262 1242 1280 1267 1272

Price

€ 476.37 € 533.83 € 631.91 € 739.20 € 854.13 € 1,067.66 € 1,478.23

Sand 16/30 Zeoplus Filter Bed (kg) (kg) (litres) 75 75 80 100 150 225 300

G 1172 1153 1183 1163 1201 1188 1193

40 56 61 75 113 169 226

H 162 175 63 63 69 88 88

51 51 55 68 103 154 205

V 955 955 1010 995 1014 992 1015

Micron WD Deep Bed Filters Part No. Product Description 2248300 Micron WD300 (6 Bar) 2248350 Micron WD350 (6 Bar) 22484071 Micron WD400 (6 Bar) 2248500 Micron WD500 (6 Bar) 2248600 Micron WD600 (6 Bar) 2248700 Micron WD700 (6 Bar)

Price € 632.44 € 796.67 € 944.40 € 1,100.83 € 1,461.83 € 1,773.88

Micron WD Deep Bed Filters Micron WD Filters are designed with filter bed depths of 1000mm providing enchanced filtration & increased contact time.

Filter Model WD300 WD350 WD400 WD500 WD600 WD700 Model WD300 WD350 WD400 WD500 WD600 WD700

Bed Depth

Filter Area

Valve Size

(mm) 1000 1000 1000 1000 1000 1000

(m2) 0.07 0.10 0.13 0.20 0.28 0.38

(mm/inch) 40/1.5 40/1.5 40/1.5 40/1.5 40/1.5 40/1.5

A 1977 1997 1987 2009 1997 2002

B 315 366 416 518 620 720

129

C 301 356 356 443 540 540

Wat. flow Com. flow 24m3/hr/m2 36m3/hr/m2 (m3/hr) (m3/hr) 1.68 2.50 2.28 3.48 3.00 4.50 4.74 7.08 6.78 10.20 9.20 13.86

D 160 160 160 160 160 160

E 1710 1730 1720 1742 1730 1735

F 1841 1861 1851 1873 1861 1866

Sand 16/30 (kg) 120 135 170 265 390 525 G 1762 1782 1772 1794 1782 1787

Zeoplus

Filter Bed

(kg) 90 101 128 200 294 396

(litres) 82 92 116 182 267 360

H 75 63 63 69 88 88

V 1590 1612 1595 1600 1582 1622

Purification Systems - Point of Use W300 Mk11 Automated Deep Bed Filters Part No. Product Description 22473002 Micron Automated W300 Mk11 Deep Bed Filter c/w Automated Valve (time based) 22473012 W300 Mk11 Tank Only, suitable for Automated Valve 22472500 Micron Automated W250 Mk11 Deep Bed Filter c/w Automated Valve (time based) 22472502 W250 Mk11 Tank Only, suitable for Automated Valve

Model

W300 MkII W250 MkII

Model W300 MkII W250 MkII

Valve Size (mm/inch) 40/1.5 40/1.5

Filter Area (m2) 0.07 0.05

Bed Depth (mm) 600 600

Max. Flow Rate Max. Working 36m3/hr/m2 Pressure (m3/hr) (Bar / psi) 2.52 7 / 102 1.80 7 / 102

Inner Diameter (mm) 300 250

Media Volume (Litres) 51 36

Overall Width (mm) 332 268

MPV for W & WD filters Part No. Product Description 228026EURO 40mm 5-way MPV 2280262EURO 40mm BSB collar 5-way MPV for MK II W300 228053EURO 50mm 6-way MPV

Price € 1,032.41 € 612.30 € 1,429.49 € 612.30

Sand 16/30 (kg) 75 52

Zeoplus 16/30 (kg) 57 40

Overall Height (mm) 1366 1385

Nom. Size (6 Bar) (7 Bar) (4 Bar)

W300 Mk11 Automated Valve & Accessories Part No. Product Description 72523000 W Series Automated Valve including weather cover and lock ring 72523010 W Series Automated Valve Almond Weather Cover 855172 W Series Automated Valve Lock Ring

Price € 147.91 € 147.91 € 228.19

Price € 993.70 € 1,084.07 € 699.74

The WSA Valve is designed to direct and regulate all the cycles necessary for the day to day operation of the Micron W300mkII filter.

• User friendly digital display and programming.

• Solid state microprocessor with easy access front panel settings.

• Stores system configuration and operation data in nonvolatile memory.

• Optimum service and backwash rates.

• Modular design with no screws to lose.

Inlet / Outlet Minimum / Maximum Operating Pressures Minimum / Maximum Operating Temperatures Current Draw and Voltage

130

25mm (1”) 1.38 Bar (20 psi) - 8.62 Bar (125 psi) 6000 hrs 0.5A 220 - 240 v

Purification Systems - Point of Use COMMANDOMATIC TCF HOUSING 6 Bar /87 psi Part No. Product Description Polypropylene Housing for Cartridge and/or Granular Filtration Purposes.

Filter supplied with both 1½” imperial & 50mm metric quick connect unions.

2150253EU C25 TCF (empty) 2150503EU C50 TCF (empty) 2150753EU C75 TCF (empty) COMMANDOMATIC TCF COMPLETE UNITS - 6 Bar Part No. Product Description 21502531EU C25 Cartridge Filter c/w 30 micron cartridge 21505031EU C50 Cartridge Filter c/w 30 micron cartridge 20507531EU C75 Cartridge Filter c/w 30 micron cartridge

Price

€ 254.68 € 312.14 € 353.11 Price € 383.35 € 484.70 € 576.04

TCF Compact Filter is a compact and economical Cartridge Filter built with an easy to use lock ring system for simple cartridge removal and replacement.

Non-corrosive, non-sticking air relief valve. Easy to operate.

Easy to read pressure gauge.

Moulded glass filled PP lid with quick loading nut for easy hand operation.

Inbuilt automatic air bleed.

High impact polypropylene body.

50mm / 1½” connections

Model C50 C75

Height (mm) 720 970

Width (mm) 384.2 384.2

Tank Diameter (mm) 259.2 259.2

Commandomatic TCF Cartridges Part No. Product Description Pleated Polyester Filter Cartridges 62041 C50 5 micron Cartridge 62043 C75 5 micron Cartridge 620411 C50 10 micron Cartridge 620431 C75 10 micron Cartridge 6204220 C50 20 micron Cartridge 6204420 C75 20 micron Cartridge 62042 C50 30 micron Cartridge 62044 C75 30 micron Cartridge

Price € 198.81 € 275.96 € 156.07 € 216.81 € 113.33 € 147.91 € 113.33 € 147.91

The pleated filter cartridge is constructed from heavy duty, easy-to-clean polyester fabric. The Cartridge’s pleats allow for more surface area and a lower pressure loss compared to depth type filter cartridges Model C50 C75

Max. Flow Rate 11.40m3/hr 16.50m3/hr

Cartridge Micron Ratings 5, 10, 20, 30 5, 10, 20, 30

131

Maximum Pressure Drop 0.2 Bar / 2.9 psi 0.2 Bar / 2.9 psi

Surface Area 4.6 m (50 ft ) 6.9 m2 (75 ft2) 2

2

Cartridge Length 490mm 740mm

Cartridge Diameter 185mm 185mm

Purification Systems - Point of Use TCF Granular Media Cartridge Components Part No. Product Description 3651922 Trimline Bottle (c/w slots) 12 litre capacity 3651923 Trimline Bottle (w/o slots) 12 litre capacity 644771 TCF sealing washer W02046 TCF cartridge spacer 6340116 TCF cartridge spacer ‘O’ ring

62031 620311 6204020 62040

Price € 44.96 € 44.96 € 10.73 € 7.45 € 1.77

TCF Granular Media Pre-Filter Cartridges C25 5 micron Cartridge C25 10 micron Cartridge C25 20 micron Cartridge C25 30 micron Cartridge

TCF75

Trimline Bottle W/O Slots

Trimline Bottle C/W Slots

Pleated Filter Cartridges The Pleated Filter Cartridges are fabricated from pleated reusable polyester fabric.

The media has been pleated to provide 2.3 to 6.9 square metres of surface area in order to maximise the cartridge dirt holding capacity and extend the time between cleaning.

Material

: Polyester Fabric material, Vinyl Plastisol end caps, Polypropylene core

Operating Temperature

: 4ºC to 50ºC

Maximum Pressure Drop : 0.2 bar / 2.9 psi

Granular Media Cartridges The granular media cartridges are able to house 12 litres of filter media and are designed to allow water to enter via the top of the cartridge and flow through the full height of the filter bed before exiting at the bottom of the cartridge.

132

€ 121.57 € 95.24 € 78.83 € 78.83

TCF50

Purification Systems - Point of Use SLIMLINE FILTER Part No. Product Description Price 45552510 Slimline CC25 Filter (empty) € 102.51 4555251 Slimline CC25 Filter c/w 30 micron cartridge element 4 Bar € 204.58 € 18.80 AF1060 Filter stand for 4555251 62051 Slimline Filter Cartridge 30 Micron € 85.46 620510 Slimline Filter Cartridg 5 Micron € 102.51 The Slimline takes up a mere 250cm2 of valuable floor space. Not only is it smart in design, the lock ring lid makes cartridge removal and replacement so easy. No additional tools are needed.

Pressure Gauge

Air Release Valve

The Slimline takes up a mere 250 cm2 of valuable floor space. Not only is it smart on design. The lock ring lid makes cartridge removal and replacement so easy. No additional tools are needed.

Easy-to-use Lid Lock Ring Requires no additional tools

Polypropylene Filter Body Corrosion proof, lightweight

Filter Base - stable, easy to install

Slimline Filter Cartridge Constructed of long-lasting and reusable polyester fabric.

Has multiple compact pleats providing 2.3 metres of surface area - maximum dirt holding, reduces cleaning frequency.

: 40˚C (100˚F)

Tank

: Polypropylene

Tank ports

: 25mm female BSP thread

Lock Ring

: Glass-filled polypropylene

Element

: Polyester fabric material, PU end caps, ABS core

Pressure Drop

: 0.2 bar / 2.9psi

Seals

: Niltrile rubber

5, 30 5.7m3/hr 2.3m2 340mm

Diameter Tank Ports Working Pressure Current Draw and Voltage

127mm 25mm BSP thread 4 Bar 40°C (100°F)

154 179

133

49 35

Maximum Temperature

459

: 4 bar / 58 psi

561

192

Specifications Working Pressure

Micron Rating Max. Flow Surface Area Length

Dimensions (mm)

Purification Systems - Point of Use COMMANDOMATIC TBF HOUSING 6 Bar / 87psi Part No. Product Description Polypropylene Housing for Bag Filtration 3761050EU C50 TBF Housing 37610750EU C75 TBF Housing

Price € 599.45 € 813.07

Air Release Valve

Pressure gauge

E

Ergonomic Lid

High impact polypropylene body

TBF housings are constructed from high impact polypropylene to be compatible with a wide range of fluids and its ergonomic screw down lid is designed for simple hand operation allowing for a quick filter changeover.

• Ideal as a coarse pre-filter / leaf trapper • Disposable filter bags • One piece mould construction • Able to withstand up to 6 Bar / 600kPa / 87 psi

50/63mm 1½”/2” Half Union

F G

Stable Mounting Feet

Internal 2” BSP thread

A B C D

Model C50 C75 Model C50 C75

Max. Flow Rate 11.4 m3/hr 16.2 m3/hr A 710mm 960mm

Required Clearance for Servicing 530mm / 20.9” 770mm / 30.3” B 665mm 915mm

C 620mm 870mm

D 71mm 71mm

Max. Pressure 6 Bar 6 Bar E 263mm 263mm

Max. Temperature 40oC / 100oF 40oC / 100oF F 278.5mm 278.5mm

G 402mm 402mm

TBF POLYPROPYLENE FILTER BAGS Part No. Product Description For C50 3651931 1 Micron Filter Bag 3651924 5 Micron Filter Bag 3651925 25 Micron Filter Bag 3651926 50 Micron Filter Bag 36519265 800 Micron Filter Bag

36519310 36519240 36519250 36519260 36519266

Price € 24.47 € 13.83 € 13.83 € 13.83 € 35.32

For C75 1 Micron Filter Bag 5 Micron Filter Bag 25 Micron Filter Bag 50 Micron Filter Bag 800 Micron Filter Bag

€ 30.86 € 30.86 € 30.86 € 30.86 € 42.13

Filter Bag Specifications Material Specific Gravity Abrasion & Flex Weak Acids Strong Acids Weak Alkali Strong Alkali Solvents

C50 Polyester* 0.91 Very Good Excellent Excellent Excellent Excellent Fair

C75 Polyester* 0.91 Very Good Excellent Excellent Excellent Excellent Fair

Filter Bag Dimensions Surface Area Diameter Length

C50 0.17m2 / 1.85ft2 178mm / 7” 419mm / 16.5”

C75 0.27m2 / 2.9ft2 178mm / 7” 660mm / 26”

134

Purification Systems - Point of Use AUTOMATED POINT OF ENTRY SYSTEMS Part No. Product Description Suitable for high pressure systems.

Commandomatic Household Water Softeners & Filters Softeners - reduction of hardness Purifier/Softeners - reduction of hardness & organic chemicals Mixed Bed Filters - reduction of sediment from water Carbon Filters - reduction of taste/odour, chlorine & organic chemicals.

Price

Recommended Unit Softener Purifier/Softener Sediment filter Carbon filter Number of persons in Household* 1-6 7-9 1-6 7-9 1-6 7-9 1-6 7-9 W7(A) S14(A) WPS4(A) WPS9(A) MB6(A) FS40(A) CF6(A) CU40(A) Commandomatic Model Typical symptoms Problem Hard Water Soap will not lather Hardness ◊◊◊1 ◊◊◊1 ◊◊◊1 ◊◊◊1 White scale build up Hardness ◊◊◊1 ◊◊◊1 ◊◊◊1 ◊◊◊1 1 1 1 Glassware streaked Hardness ◊◊◊ ◊◊◊ ◊◊◊1 ◊◊◊ Dirty Water Dirt/rust settling out Sediment ◊◊◊ ◊◊◊ ◊ ◊ Sludge/clay settling Mud ◊◊◊ ◊◊◊ Green organic matter Algae ◊◊◊ ◊◊◊ Suspended matter Colloidal clay Clarification on Application Orange/Brown ◊2 ◊2 ◊2 ◊2 ◊2 ◊2 Iron u Green stains on fittings Copper ◊◊◊ ◊◊◊ ◊◊◊ ◊◊◊ Discoloured water Organic colour ◊◊ ◊◊ ◊ ◊ Taste and Odour Smell of chlorine Chlorine ◊3 ◊3 ◊◊◊ ◊◊◊ Rotten vegetable smells Odour ◊ ◊ ◊◊◊ ◊◊◊ Rotten egg smell Hydrogen Sulphide ◊ ◊ Salty to taste Salty / Brackish Reverse Osmosis on Application Other Not readily detectable Fluoride ◊ ◊ Requires analysis Nitrate ◊ ◊

◊◊◊ Excellent Performance ◊◊ Good Performance ◊ Fair Performance * Washing machines, dishwashing machines, spa baths – each count as one person.

1.

Based on 143 mg/L hardness for softeners, Purifiers/Softeners.

2.

Water softener satisfactory to 0.3mg/L 3.

Water Purifier/Softener satisfactory to 0.1ppm This chart has been prepared as a guide based on municipal water supplies. These products are not designed for the removal of micro-organisms and some may result in the accumulation of them in certain circumstances. Therefore, for drinking water, it is important that they are used on microbiologically safe water and that flushing and maintenance protocols are strictly adhered to.

135

Purification Systems - Point of Use Commandomatic Water Softeners Part No. Product Description Fully Self-Contained water softeners with special media bed regeneration with water - softening regenerant - coarse salt.

3778341 W7 Semi Automatic Softener Capable of 7000 litres between regenerations at 150ppm hardness. Size 900mm pressure 210-825 kpa (30-120 psi).

Simply set timer when regeneration is required.

Price

€ 1,092.22

37783421

W7A Fully Automatic Softener As above except fitted with a microprocessor to regenerate programmable number of days.

€ 1,314.00

37783431

W7V VOLUMATIC Softener Capable of 7000 litres between regenerations at 150ppm hardness. Size 900mm high x 460mm wide x 230mm deep. 15mm inlet and 25mm outlet connections.

Operating pressure 210-825 kpa (30-120 psi). Fitted with microprocessor set to provide regeneration when required volume of water has been conditioned.

€ 1,502.79

3771913

S14 Semi Automatic Softener Capable of 14000 litres between regenerations at 150ppm hardness. Size 1040mm high x 395mm wide x 340mm deep.

25mm connections. Operating pressure 210 - 825 kpa (30120 psi). Simply set timer when regeneration is required.

€ 1,420.77

37719141

S14A Fully Automatic Softener As above except fitted with a microprocessor to regenerate programmable number of days.

€ 1,724.66

37783511

S14V VOLUMATIC Softener Capable of 14,000 litres between generations at 150ppm hardness. Size 1040mm high x 395mm wide x 340mm deep. 25mm connections. Operating pressure 210 - 825 kpa (30 -120 psi). Fitted with a microprocessor set to provide regeneration when required volume of water has been conditioned.

€ 1,954.60

Water Softeners Unit Model No. Capacity* Regeneration time Pipe Connections Inlet/Outlet Drain Flow Rates Normal Brine Rinse Operating Pressure Dimensions Height Width

W7 7m3 60 mins

S14 14m3 80 mins

15mm 13mm

25mm 13mm

1.62m3/hr 0.16m3/hr 0.11m3/hr 275 – 825 kPa

2.40m3/hr 0.38m3/hr 0.25m3/hr 275 – 825 kPa

920 mm 460 mm

1030mm 395 mm

* Based on 143 mg/L hardness

Semi Automatic Timer

Fully Automatic Controller

For Semi-Automatic Regeneration simply turn the Timer’s dial to the required duration.

The unit will then initiate regeneration and upon completion, automatically return to normal operation

Calendar Timer (no flow meter) The unit keeps track of the length of time since the last regeneration and automatically regenerates the softener, once the programmed calendar setting has been reached Volumatic (with flow meter) The unit and keeps track of how much water has been softened since the last regeneration and automatically regenerates the softener, once the remaining capacity is less than the daily reserve capacity.

136

Purification Systems - Point of Use Purifiers/Softeners Part No. Product Description Fully self-contained water purifier softener combinations with mixed media beds regenerated with water softening regenerant - coarse salt.

Price

Commandomatic Softeners/Purifiers 3778344 WPS4 Semi Automatic Purifier/Softener Softens water and removes organic colour, bicarbonates and sulphate.

Capable of 4500 litres between regenerations at 150ppm hardness and with purifier capacity dependant on level of contamination. All physical and pressure details as for W7. Simply set timer when regeneration is required.

€ 1,191.72

37783451 WPS4A Fully Automatic Purifier/Softener As above except fitted with a microprocessor to regenerate programmable number of days.

€ 1,437.17

37783461 WPS4V Volumatic Purifier/Softener Softens water & removes organic colour, bicarbonates, sulphate & nitrate.

Capable of 4500 litres between regenerations at 150ppm hardness & with purifier capacity dependant on level of contamination. All physical & pressure details as for W7. Fitted with a microprocessor set to provide regeneration when the required volume of water has been conditioned.

€ 1,658.86

3771925 PS9 Semi Automatic Purifier/Softener Softens water and removes organic colour, bicarbonates, sulphate and nitrate.

Capable of 9000 litres between regenerations at 150ppm hardness and with purifier capacity dependent on level of contamination. All physical and pressure details as per S14. Simply set timer when regeneration is required.

€ 1,552.10

37719261 PS9A Fully Automatic Purifier/Softener As above except fitted with a microprocessor to regenerate programmable number of days

€ 1,831.34

37783521 PS9V Volumatic Purifier/Softener Capable of 9,000 litres between generations at 150ppm hardness. Size 1040mm high x 395mm wide x 340mm deep. 25mm connections. Operating pressure 210 - 825 kpa (30 -120 psi). Fitted with a microprocessor set to provide regeneration when required volume of water has been conditioned.

€ 2,159.80

Water Softener/Purifiers Unit Model No. Capacity* Regeneration time Pipe Connections Inlet/Outlet Drain Flow Rates Normal Brine Rinse Operating Pressure Dimensions Height Width

WPS4 4,5m3 60 mins

PS9 9m3 80 mins

15mm 13mm

25mm 13mm

1.6m3/hr 0.16m3/hr 0.11m3/hr 275 – 825 kPa

2.40m3/hr 0.38m3/hr 0.25m3/hr 275 – 825 kPa

920 mm 460 mm

1030mm 395 mm

* Based on 143 mg/L hardness Semi Automatic Timer

Fully Automatic Controller

For Semi-Automatic Regeneration simply turn the Timer’s dial to the required duration.

The unit will then initiate regeneration and upon completion, automatically return to normal operation

Calendar Timer (no flow meter) The unit keeps track of the length of time since the last regeneration and automatically regenerates the softener, once the programmed calendar setting has been reached Volumatic (with flow meter) The unit and keeps track of how much water has been softened since the last regeneration and automatically regenerates the softener, once the remaining capacity is less than the daily reserve capacity.

137

Purification Systems - Point of Use AUTOMATED POINT OF ENTRY SYSTEMS Part No. Product Description Commandomatic Sediment Filters Fully self-contained water filter with special mixed media which is backwashable - does not need regeneration.

Price

3768347

MB6 Semi Automatic Filter Contains a backwashable mixed filter media bed of sand, gravel and anthracite for sediment removal above 10 microns, with a flow rate of 1830 litres/minute. Size 830mm high x 270mm wide x 235mm deep. Simply set timer when backwashing is required.

€ 780.17

37683481

MB6A Fully Automatic Filter As above except fitted with a microprocessor to regenerate programmable number of days.

€ 993.70

3761945

FS40 Semi Automatic Filter Contains a backwashable filter media bed of sand, gravel, and anthracite for sediment removal above 10 microns and with flow rate of 27-40 litres/ minute. All physical and pressure details as for S14. Simply set timer when backwashing is required.

€ 1,240.14

37619461

FS40A Fully Automatic Filter As above except fitted with a microprocessor to regenerate programmable number of days.

Carbon Purifiers

€ 1,445.33

Commandomatic Carbon Purifiers Fully self-contained water purifier with special carbon media which is backwashable - does not need regeneration. € 911.59

3768349

CF6 Semi Automatic Carbon Purifier Contains a backwashable bed of activated carbon which absorbs bad taste, colour, odour and chlorine. Flow rate of 14-30 litres per minute.

All physical and pressure details as for MB6.Simply set timer when backwashing is required.

37683501

CF6A Fully Automatic Carbon Purifier As above except fitted with a microprocessor to regenerate programmable number of days.

€ 1,133.37

3761955

CU40 Semi Automatic Carbon Purifier Contains a backwashable bed of activated carbon which absorbs bad tastes, colour, odour and chlorine. Flow rate of 18 - 40 litres per minute.

All physical and pressure details as for S14. Simply set timer when backwashing is required.

€ 1,322.16

37619561

CU40A Fully Automatic Carbon Purifier As above except fitted with a microprocessor to regenerate programmable number of days.

€ 1,453.67

Unit Model No Pipe Connections Inlet/Outlet Drain Flow Rates Normal Backwash Operating Pressure Dimensions Height Vessel Height Width Depth Bed Depth Weight Packed Semi Automatic Timer Fully Automatic Timer

MB6

FS40

15mm 13mm

25mm 13mm

1.62m3/hr 0.84m3/hr 210 – 825 kPa

2.40m3/hr 1.08m3/hr 210 – 825 kPa

865 mm 494mm 295 mm 240 mm 400mm 29 kg

1040 mm 634mm 395 mm 340 mm 510mm 52 kg

For Semi-Automatic Regeneration simply turn the Timer’s dial to the required duration.

The unit will then initiate regeneration and upon completion, automatically return to normal operation The unit keeps track of the length of time since the last regeneration and automatically backwashes the filter, once the programmed calendar setting has been reached

138