•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Silicone rubber has great resilience and elasticity, and it retains these properties over a wide range of temperatures. • Semi-conductive, for use in areas requiring a degree of conductivity and/or anti-static conditions.
•
•
•
•
•
•
•
•
•
•
•
•
• Specifically formulated for American Market. • Flexible, fluorosilicone rubber sleeving, that exhibits excellent fluid resistance e.g. Kerosene, Skydrol.
•
•
•
•
•
•
• Economic choice, particularly suitable where overall cable diameters have to be kept to a minimum. • Par-O-Cut® version of OSM for ease of handling and installation. • Very economical. Applications include cable jackets and extra electrical and mechanical protection for bundled cables. • Electrical insulation and binding for conductors and connections of electrical equipment. Two thermal classes available.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• This material exhibits good resistance to mineral oils, aromatic fuels, etc. • A synthetic elastomer with unique flame temperature index performance. LUL approved for mass transit.
• Heatshrink inner adhesive liner melts and flows to seal and encapsulate components or splices contained within. • As above (OSDW) with a 4:1 shrink ratio.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• High temperature heatshrink providing semi-rigid, flame retardant, abrasion and cut-through resistant strain relief. Excellent resistance to oils, acids and fuels. Extreme low temperature performance and a low shrink temperature (110ºc).
•
•
•
•
• An extremely mechanical and chemical resistant heatshrinkable tubing for high temperature application. Non-meltable & self-extinguishing, and is designed for the insulation and covering of harnesses, within hazardous areas.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rail Siegrist-Orel Limited Hornet Close
• A non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. • A thin wall non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. LUL approved for mass transit. • High quality, economical PVC Heatshrink Sleeving. • Layflat, very thin wall PVC Heatshrink most commonly used for electronic component covering. • Flame retardant adhesive lined heatshrink for ‘below ground’ mass transit applications. LUL approved. • Flame retardant adhesive lined heatshrink for ‘above ground’ mass transit applications. LUL approved.
Electronics
Pysons Road Industrial Estate
• Insulating material for the American market with superior thermal, mechanical and electrical properties. • Excellent resistance to oils, acids and fuels. Use in harsh and extreme conditions.
•
•
Military/Defence
• FABsil silicone has high tear-strength, good flame-retardant properties. • Similar properties to FABsil (OSF), but with the addition of fluorination which offers a resistance to fuels, lubricants and hydraulic fluids.
•
•
Aerospace/Aviation
Broadstairs Kent CT10 2LQ
• As OSTW but with super thin wall for tighter applications. • As OSTW but with heavy wall for superior voltage, thermal and strain relief applications.
•
who we work for
• Penetrant printed version of OSC. • Economical industry standard binding sleeve.
•
•
identification excellence recognised worldwide
A high-grade sleeve containing no natural rubbers, yet providing good elasticity and resistance to oils and greases.
•
•
contact
Kit bags
•
•
Easy-Peel Kit Card
•
Kit boxes
•
Resistor colour coded
•
Description
Markers
•
Par-O-Cut ®
•
Slit cut
Pre-lubricated
•
Spiral cut
Sleeving
Cut sleeves (>1mm)
Form
Communications +44 (0) 1843 865241
t
+44 (0) 1843 867180
f e
Marine
info@siegrist-orel.co.uk
• Highly flexible, flame-retardant, abrasion resistant, elastomer combined with mechanical toughness. • Very flexible and self-extinguishing heatshrink, resistant to attack by chemicals, oil and fuels, high abrasion, specifically developed for Aerospace and Military applications.
Power/Utilities
• Commercial grade light-weight, flexible polyolefin tubing, with a smooth glossy external finish. • Commercial flame retarded, low shrink temperature, heatshrink. • Commercial very flexible, thin wall, flame retardant heat-shrinkable polyolefin tubing, for covering irregular shaped components and general purpose use. • Military Grade heatshrink which is extremely flexible and flame retarded and meeting a wide range of defence and industrial applications.
Medical
• As above (OSH) with a 3:1 shrink ratio. • Military Grade Semi-Rigid and flame retarded heatshrink which meets a wide range of defence and industrial applications - particularly suitable for strain relief.
high performance cable identification and protection systems
Outstanding chemical and solvent resistant heatshrink operating over a wide temperature range. • A self-extinguishing, abrasion-resistant braided sheathing used for the enclosure and protection of cables and wires. • A braided fibreglass sleeving coated with acrylic resin providing good mechanical resistance and dielectric strength. • UL approved silicone rubber coated braided glass providing good mechanical and electrical resistance. • LUL approved glass braided sheathing, limited fire hazard for use in mass transit industry.
www.siegrist-orel.co.uk
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Silicone rubber has great resilience and elasticity, and it retains these properties over a wide range of temperatures. • Semi-conductive, for use in areas requiring a degree of conductivity and/or anti-static conditions.
•
•
•
•
•
•
•
•
•
•
•
•
• Specifically formulated for American Market. • Flexible, fluorosilicone rubber sleeving, that exhibits excellent fluid resistance e.g. Kerosene, Skydrol.
•
•
•
•
•
•
• Economic choice, particularly suitable where overall cable diameters have to be kept to a minimum. • Par-O-Cut® version of OSM for ease of handling and installation. • Very economical. Applications include cable jackets and extra electrical and mechanical protection for bundled cables. • Electrical insulation and binding for conductors and connections of electrical equipment. Two thermal classes available.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• This material exhibits good resistance to mineral oils, aromatic fuels, etc. • A synthetic elastomer with unique flame temperature index performance. LUL approved for mass transit.
• Heatshrink inner adhesive liner melts and flows to seal and encapsulate components or splices contained within. • As above (OSDW) with a 4:1 shrink ratio.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• High temperature heatshrink providing semi-rigid, flame retardant, abrasion and cut-through resistant strain relief. Excellent resistance to oils, acids and fuels. Extreme low temperature performance and a low shrink temperature (110ºc).
•
•
•
•
• An extremely mechanical and chemical resistant heatshrinkable tubing for high temperature application. Non-meltable & self-extinguishing, and is designed for the insulation and covering of harnesses, within hazardous areas.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rail Siegrist-Orel Limited Hornet Close
• A non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. • A thin wall non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. LUL approved for mass transit. • High quality, economical PVC Heatshrink Sleeving. • Layflat, very thin wall PVC Heatshrink most commonly used for electronic component covering. • Flame retardant adhesive lined heatshrink for ‘below ground’ mass transit applications. LUL approved. • Flame retardant adhesive lined heatshrink for ‘above ground’ mass transit applications. LUL approved.
Electronics
Pysons Road Industrial Estate
• Insulating material for the American market with superior thermal, mechanical and electrical properties. • Excellent resistance to oils, acids and fuels. Use in harsh and extreme conditions.
•
•
Military/Defence
• FABsil silicone has high tear-strength, good flame-retardant properties. • Similar properties to FABsil (OSF), but with the addition of fluorination which offers a resistance to fuels, lubricants and hydraulic fluids.
•
•
Aerospace/Aviation
Broadstairs Kent CT10 2LQ
• As OSTW but with super thin wall for tighter applications. • As OSTW but with heavy wall for superior voltage, thermal and strain relief applications.
•
who we work for
• Penetrant printed version of OSC. • Economical industry standard binding sleeve.
•
•
identification excellence recognised worldwide
A high-grade sleeve containing no natural rubbers, yet providing good elasticity and resistance to oils and greases.
•
•
contact
Kit bags
•
•
Easy-Peel Kit Card
•
Kit boxes
•
Resistor colour coded
•
Description
Markers
•
Par-O-Cut ®
•
Slit cut
Pre-lubricated
•
Spiral cut
Sleeving
Cut sleeves (>1mm)
Form
Communications +44 (0) 1843 865241
t
+44 (0) 1843 867180
f e
Marine
info@siegrist-orel.co.uk
• Highly flexible, flame-retardant, abrasion resistant, elastomer combined with mechanical toughness. • Very flexible and self-extinguishing heatshrink, resistant to attack by chemicals, oil and fuels, high abrasion, specifically developed for Aerospace and Military applications.
Power/Utilities
• Commercial grade light-weight, flexible polyolefin tubing, with a smooth glossy external finish. • Commercial flame retarded, low shrink temperature, heatshrink. • Commercial very flexible, thin wall, flame retardant heat-shrinkable polyolefin tubing, for covering irregular shaped components and general purpose use. • Military Grade heatshrink which is extremely flexible and flame retarded and meeting a wide range of defence and industrial applications.
Medical
• As above (OSH) with a 3:1 shrink ratio. • Military Grade Semi-Rigid and flame retarded heatshrink which meets a wide range of defence and industrial applications - particularly suitable for strain relief.
high performance cable identification and protection systems
Outstanding chemical and solvent resistant heatshrink operating over a wide temperature range. • A self-extinguishing, abrasion-resistant braided sheathing used for the enclosure and protection of cables and wires. • A braided fibreglass sleeving coated with acrylic resin providing good mechanical resistance and dielectric strength. • UL approved silicone rubber coated braided glass providing good mechanical and electrical resistance. • LUL approved glass braided sheathing, limited fire hazard for use in mass transit industry.
www.siegrist-orel.co.uk
Attained ARB (latterly CAA) approval
1975
Attained MOD Defence Standard 05-24 approval
1982
1990s
Developed unique printing process for PTFE markers without pre-etching
120ºc
150ºc
Land and sea military vehicles/craft,
-65ºc
200ºc
250ºc
Y
control panel manufacturers
Y
-65ºc
200ºc
300ºc
Y
-65ºc
180ºc
250ºc
Y
-30ºc
200ºc
250ºc
Y
-80ºc
250ºc
300ºc
-65ºc
175ºc
Y
Y
-65ºc
70ºc
Y
Y
-65ºc
70ºc
-40ºc
Y Y
250ºc
-65ºc
85ºc/105ºc
Y
-20ºc
105ºc
Y
-65ºc
250ºc
Y
D2c
3
1.5
2
D3
2.5
1.5
4
4
2
Y
200%min 5.5min
4
2
Y
180%min
2
1.5
Y
260%min
3
1.5
2 Y
Anti - mould BS 2011 Part 2.I.J
BS 6746 C
International RCC Markers
Flex insulation BS 2848.Type
MIL - I - 23053/5
MIL - I - 23053/12
UL Approved
Y
D5
OSC
Neoprene
Y
Neoprene
OSK
Neoprene
Neoprene
OSX
Neoprene
Y
4
Y
Y
Y
OSNT
PVC-Nitrile
OSNT
PVC-Nitrile
OSLH
Silicone
OSLH
Silicone
Y
OSF
Silicone
OSF
Silicone
Silicone
OSLF
Silicone
5
5a/b/c
Y
2.5
1.5
D1
3
Y
2.5
1.5
D1
3
Y
Y
Y
Y
OSLF
Y
Y
Y
OSS
Silicone
OSS
Silicone
OSS (CL)
Silicone
OSS (CL)
Silicone
Y
OSS (VO)
Silicone
OSS (VO)
Silicone
Silicone
OSFF
Silicone
Y Y
Y
Y
OSFF
3
Y
Y
Y
OSM
PVC
OSM
PVC
3
Y
Y
Y
OSMP
PVC
OSMP
PVC
Y
OSMC
PVC
OSMC
PVC
OSB
PVC
OSB
PVC PVC
D4
230%min
Y D1
280%min
Neoprene
OSK
Y
Y
Y
OSC
Y
Y
2
Y
Y
Notes
1c
D4
3
Y
Material
OSX
D5
3
Y Y
1a
Grade
Colour
Y
3
Y
UL224 VW -1Flame Tesr
BS 3858 (1992) Type
1a
UL94 V-O
BS 3858 (1965) Type
LUL R.M.E. 716, Iss.B
LUL 2-01001-002 (E1042 A6)
BS 6853
DEF STAN 59-97, Type
1 1
Y
2
4
Y
400ºc
DEF STAN 59-15, Type
BS G198, Part 4, Type
BS G198, Part 3, Type
BS G198, Part 2, Type
BS G198, Part 1, Type
Shrink ratio
1
350%min
275%min
Abrasion resistant
Radial stretch when fitted (BORE X)
Tensile strength (MPa)
400%min
D2a
1.5
Y
Y
70ºc
Y
Elongation @ break
Low smoke Zero halogen Self extinguishing
Flame retardant
Y
150% AV
D2a
American standards
Binding and identification
3
Y
Y
Y
ULPVC
PVC
ULPVC
6
Y
Y
Y
OSTW
PTFE
OSTW
PTFE
PTFE
OSSTW
PTFE
Y Y
7
D6
6
Y
Y
Y
OSSTW
D6
6
Y
Y
Y
OSHW
PTFE
OSHW
PTFE
D6
Y
-65ºc
250ºc
400ºc
Y
Y
Global carriers, infrastructure equipment,
Y
-65ºc
250ºc
400ºc
Y
Y
7
Y
-50ºc
110ºc
Y
250%min
3:1
OSDW (3:1)
Polyolefin
OSDW (3:1)
Polyolefin
Y
-55ºc
110ºc
Y
200%min
4:1
OSDW (4:1)
Polyolefin
OSDW (4:1)
Polyolefin
2:1
Y
OSNH
Polyolefin
OSNH
Polyolefin
Y
Y
OSNH (TW)
Polyolefin
OSNH (TW)
Polyolefin
Y
Y
FPVC
PVC
FPVC
PVC
Y
OSLFT
PVC
OSLFT
PVC
Y
W3NH
Polyolefin
W3NH
Polyolefin
Y
SCM2
Polyolefin
SCM2
Polyolefin Neoprene
Commercial, industrial and military vessels Power/Utilities
Y
-40ºc
105ºc
175ºc
105ºc
Y
380%min 7.0min
2:1
-35ºc
105ºc
Y
200%min
2:1
Y
-40ºc
105ºc
Y
Y
-40ºc
175ºc
105ºc
control equipment, offshore
Y
-70ºc
120ºc
200ºc
renewable energy, water
Y
-75ºc
120ºc
215ºc
Y
-55ºc
105ºc
Y
-55ºc
125ºc
Y
-40ºc
135ºc
Y
-55ºc
135ºc
Y Y Y
Y Y Y
120ºc
Y Y Y
Y
Y
Y 225ºc
Y
Y
350%min 12.0min
Y
Y
OSNE
Neoprene
OSNE
Y
Y
OSNN
Mod. Elastomer
OSNN
MOD. Elastomer
Y
Y
OSCH (105)
Polyolefin
OSCH (105)
Polyolefin
Y
Y
OSCH (125)
Polyolefin
OSCH (125)
Polyolefin
Y
Y
OSCH (135)
Polyolefin
OSCH (135)
Polyolefin
Y
Y
OSH
Polyolefin
OSH
Polyolefin
Polyolefin
OSH 3:1
Polyolefin
2:1
300%min
2:1
200%min
2:1
250%min 10.0min
2:1
225ºc
Y
Y
250%min 10.0min
3:1
225ºc
Y
Y
400%min 14.0min
2:1
Y
-55ºc
175ºc
300ºc
Y
Y
150%min 35.0min
2:1
Y
-200ºc
200ºc
Y
Y
300ºc
Y
Y
250%min 1 10.0min
-67ºc
250ºc
400ºc
Y
Y
250%min
0ºc
150ºc
Y
Y
Y
-25ºc
155ºc
200ºc
Y
Y
Y
-70ºc
200ºc
250ºc
Y
Y
Y
-70ºc
250ºc
450ºc
Y Y Y
Y
Y
6b
135ºc
Continuing to develop and supply world class cable marking, identification and protection solutions worldwide…
Y
6a
350%min
200ºc
Y
10A
135ºc
Celebrating 70 years in business
Y
Y
10B
-55ºc
Y
Y
Y
2:1
-55ºc
Y
8
Y
2:1
Y
-55ºc
15
Y
3:1
Y Y
8
3:1
Y Y
Y
15
2:1
Y
Y
2005
380%min 7.0min
-40ºc
-55ºc
hospital infrastructure
Y
Y
Y
Equipment, materials,
Y Y Y
Y
Oil & gas, generation and
Medical
2004
350ºc
Y
1.5
1
Rail /Mass transit
7
Marine
2003
250ºc
Y Y Y Y
1
Defence standards
Communications telecom manufacturers and network providers
Introduced computerised ‘in-house’ marking system
-65ºc
Y
Y
Component, PCB and
2001
Temperature max short period
-65ºc
Y
Mass transit, rolling stock, track and
1993
Attained BS EN ISO 9001:2000 approval
Attained AECMA-EASE AS9100 approval
Temperature + working
Y
1.5
4
Y
Aerospace standards
4 4
Y
Military/Defence
Rail
Pioneered development of mass-transit low fire hazard products for London Underground
95ºc 95ºc
Electronics
1989
-65ºc
Physical properties
Y
-65ºc
signalling equipment
Became de facto producer of LUL cable markers
95ºc
Y
weapon systems, radio communications
Attained BS 5750 approval by British Telecom
-65ºc
Y
Siegrist introduced specialist sleeving tools
1964
Y
Limited fire hazard properties
Radial stretch for fitting (BORE X)
1935
Aircraft, airlines, avionic products, satellite and space
Temperature - working
Swiss born Emil Siegrist founded company to manufacture rubber sleeves for finishing cables
Stretch On
Aerospace/Aviation 1934
Temperature working range
Application
Push On
identification excellence recognised worldwide
Shrink On
definitive dates
Y
Y 1a/2b
11A/B
11B
Y
Y
Y
Y
Y
Y
OSH 3:1
Y
Y
Y
OSR
Polyolefin
OSR
Polyolefin
2b
Y
Y
Y
2a
Y
Y
Y
Y
OSKN
Kynar
OSKN
Kynar
3:2
OSFEP
Fluoro Polymer
OSFEP
Fluoro Polymer
2:1
Viton
OSVT
Viton PTFE
Y 4:1
20 12A
3
Y
Y
Y
Y
OSVT
Y
Y
OSPE
PTFE
OSPE
Y
SS
Polyester
SS
Polyester
OSAG
Acrylic Glass
OSAG
Acrylic Glass
7.5kV
OSBOG
Silicone Glass
OSBOG
Silicone Glass
Y
OSVSR
Glass Sheathing
OSVSR
Glass Sheathing
4a 21B
5b
Y
Y
Y
Y
who we are
For over 70 years, Siegrist-Orel has been producing high performance cable marker, sleeve identification and protection products to the highest standards and specifications. Our core global client base of defence, aerospace and mass-transit companies has expanded to encompass other equally demanding industry sectors, such as telecomms, electronics, power and medical.
Our history demonstrates an outstanding track record of innovation, problem solving and product development. We have worked on a diversity of national and international projects, ranging from satellites, aircraft and submarines to musical instruments and sports equipment. Our research team has created groundbreaking specialist materials, such as the low fire hazard markers developed in the wake of the King’s Cross fire. We have developed new print technology that guarantees truly indelible integrated cable marking and recently introduced a revolutionary system that is setting new standards in computerised cable marking.
As anyone who has visited our factory will testify, we take great pride in our work. Thanks to our extensive in-house testing facilities, we can certify products and materials to meet stringent national, defence and international standards. Our research and development unit offers a similar high quality service, ensuring that Siegrist-Orel customers always obtain informed advice on choosing the best materials for their application.
The exceptional skills and expertise of our dedicated staff and their 'can do' attitude are key to our ongoing success. Highly professional and totally committed to quality service, they offer unrivalled in-depth experience across all sections of the business.
When you work with Siegrist-Orel, you are dealing with a team of people who have a single goal in mind – your complete satisfaction with our products and services. Whatever the size or scale of your project, you can rely on us to develop and deliver the best value cable identification, protection or marking solution to meet your needs – and your budget. Quality doesn’t have to come at a price!
Our Mission
To become the natural choice of organisations seeking high performance cable identification solutions delivered globally by a committed team of highly skilled and experienced people, who share a tradition of integrity and excellent customer service.
As you’d expect from a company committed to achieving excellence in every aspect of its business, we hold all the requisite UK and European premier quality standards, as well as Airbus, London Underground and BAe Systems approvals.
excellence as standard
Systems Quality
Customer Enquiry
Rigorous quality checks of our advanced systems and streamlined processes ensure that we deliver value, as well as quality, to our customers. Third party accreditations include:
Review Requirements
BS EN ISO 9001: 2000 – BVQI AS 9100 – AECMA – EASE (Airbus UK)
Customer Order
Customer Quality Our many customer endorsements and partnerships from companies working across a wide range of industry sectors are testament to the superior level of
Contract Review
quality service customers have come to expect as standard from Siegrist-Orel. Product Quality
Acknowledgement
Material and product qualifications are approved to required national, defence and international standards. Qualification approval is affirmed by QinetiQ. Stringent Testing and Inspection
Product Realisation
We have extensive in-house testing and inspection facilities for electrical, physical, environmental, mechanical and chemical testing to verify and certify products to required specifications, including BS3858, BS2848, BSG198, and Def. Stan. 59-15
From Manufacturing
From Stock
and 59-97. Qualified, experienced technicians put all products and materials through rigorous
Collation & Final Inspection
inspections and tests to ensure they surpass test requirements and meet fully the vast array of ultra-stringent national, defence and international standards.
Packing & Post
Research and Development Over the years, Siegrist-Orel’s research and development team has produced an impressive number of quality products and solutions
Management Responsibilty
Customer Care
that have not only resolved customers’ problems but also contributed towards a safer environment. Measurement Analysis & Improvement
Resource Management
Product Realisation
Are you looking for a solution to a particular problem?
We can help
HPi
high performance identification
The Ultimate in Print Technology Our High Performance Identification systems provide cable markers which are beyond compare, capable of surviving the most aggressive environments in the world, and will naturally out-perform standard products. Advanced Ink Transfer The unique method of ink transfer ensures that the ink actually penetrates the sleeve material and bonds with the molecules of the material substrate. The integrated ink is then sealed in, so that it is totally protected. The result is a composite mark that is completely indelible and capable of withstanding extreme temperatures, humidity and exposure to fuels and chemicals.
Ink layer Protective layer
Outstanding Print Capability Our skilled technicians can print virtually anything you want on the complete 360Âş sleeve circumference, virtually any way you want, with complete accuracy. We can reproduce everything from the most basic to the most complex numeric, alpha-numeric or alpha characters, as well as instructions, symbols, tables and even logos. Characters can be printed in single or multi-lines of any length, from once to multiple times round the sleeve, in horizontal, vertical or variaxialÂŽ (combination of horizontal and vertical) formats. Superior Ink Quality
Ink penetration
Specially formulated inks and technology have been developed over decades to ensure we can provide the required mark permanence and performance for each material type. We can supply
Encapsulated marking
black, white, red, yellow, blue and green inks, plus other colours on request. More Applications We can print international RCC (resistor colour coded markers) in a wide range of materials. All the IPS (industrial protection sleeving) range of products can be printed in customised form, and we can even print on notoriously difficult materials such as PTFE without the need to pre-etch.
See Product Configurator to view the full range of sleeving materials suitable for High Performance Identification.
the ultimate print technology
The comprehensive range of
sleeving materials suitable for
High Performance Identification is
featured in a product configurator
at the back of this brochure.
industrial protection sleeving
iPS
Whatever type of sleeve or sleeving you require, you’ll find we have a product in our range that will meet your specifications and requirements.
Our extensive selection of IPS (Industrial Protection Sleeving) covers all the sleeving applications required for today’s safety-critical designs in mass-transit areas, particularly aerospace, aviation and underground rail industries. From Basic to Sophisticated Products range from economical PVC and Neoprene for insulation and binding applications, through to sophisticated heat shrinkable PTFE sleeves exhibiting excellent resistance to temperature and fluid contamination. In addition to the extensive range of products listed below, we can advise on materials to meet your specific needs, whatever the size or scale of your operation.
Need to know more about our range of cable protection products? Please turn to this brochure’s comprehensive Materials Description and Application Guide.
cable protection you can rely on
Sleeving Overview
Nitrile Resistance to mineral oils, aromatic fuels, acids and alkalis Operates at temperatures up to 120ÂşC
Silicone
Available as continuous sleeving, cut sleeves and printed
Good resistance to harsh environments
cable markers
Size range 0.50mm to 50mm ID Standard to high strength grades with exceptional tear strength and fluorinated versions for fluid resistance, plus premium grade low fire hazard material
Polyolefin Heat Shrinkable Flame retardancy, flexibility and rapid shrink Low cost commercial, military, high performance and dual wall materials
Available as continuous sleeving, cut sleeves and printed
Size range 1.2mm ID to 102mm ID
cable markers
Choice of shrink ratios and bright colours
PTFE
Available as continuous sleeving, cut sleeves and printed
Ultimate resistance to temperature and fluids, including oils,
cable markers
acids and fuels
Braided Glass Sleeving
Choice of grades to suit weight and insulation requirements
Basic acrylics to silicone coatings or complete saturation using
Available as continuous sleeving, cut sleeves and printed cable markers Neoprene Economy, insulation, strength and flexibility Wide range of colours in sizes from 0.75mm to 25mm ID Cost savings with one size fitting several wire sizes Siegrist offers complementary sleeving tools and application lubricant (SolubeÂŽ)
silicone varnish Available as continuous sleeving and cut sleeves Braided Polyester/Polypropylene Sleeving Abrasion resistant sheathing for enclosure and protection Self-extinguishing, lightweight and easy to handle Self-sealing with hot knife cut Expandable, accommodating a variety of cable bundle sizes Available as continuous sleeving and cut sleeves
Available as continuous sleeving, cut sleeves and printed
Specialist Applications
cable markers
Very short lengths (>1mm)
PVC Versatile and low-cost Size range 0.5mm to 25mm ID Minimum wall thickness and weight Available as continuous sleeving, cut sleeves and printed cable markers
Spiral cut LFH (low fire hazard) Fluorinated Pre-lubricated sleeves/sleeving Par-o-cut (semi severed)
cable protection you can rely on
Sleeving Overview
Nitrile Resistance to mineral oils, aromatic fuels, acids and alkalis Operates at temperatures up to 120ÂşC
Silicone
Available as continuous sleeving, cut sleeves and printed
Good resistance to harsh environments
cable markers
Size range 0.50mm to 50mm ID Standard to high strength grades with exceptional tear strength and fluorinated versions for fluid resistance, plus premium grade low fire hazard material
Polyolefin Heat Shrinkable Flame retardancy, flexibility and rapid shrink Low cost commercial, military, high performance and dual wall materials
Available as continuous sleeving, cut sleeves and printed
Size range 1.2mm ID to 102mm ID
cable markers
Choice of shrink ratios and bright colours
PTFE
Available as continuous sleeving, cut sleeves and printed
Ultimate resistance to temperature and fluids, including oils,
cable markers
acids and fuels
Braided Glass Sleeving
Choice of grades to suit weight and insulation requirements
Basic acrylics to silicone coatings or complete saturation using
Available as continuous sleeving, cut sleeves and printed cable markers Neoprene Economy, insulation, strength and flexibility Wide range of colours in sizes from 0.75mm to 25mm ID Cost savings with one size fitting several wire sizes Siegrist offers complementary sleeving tools and application lubricant (SolubeÂŽ)
silicone varnish Available as continuous sleeving and cut sleeves Braided Polyester/Polypropylene Sleeving Abrasion resistant sheathing for enclosure and protection Self-extinguishing, lightweight and easy to handle Self-sealing with hot knife cut Expandable, accommodating a variety of cable bundle sizes Available as continuous sleeving and cut sleeves
Available as continuous sleeving, cut sleeves and printed
Specialist Applications
cable markers
Very short lengths (>1mm)
PVC Versatile and low-cost Size range 0.5mm to 25mm ID Minimum wall thickness and weight Available as continuous sleeving, cut sleeves and printed cable markers
Spiral cut LFH (low fire hazard) Fluorinated Pre-lubricated sleeves/sleeving Par-o-cut (semi severed)
delivering added value
To complement our range of cable marker, sleeve identification and protection products, we have a range of ancillary products and services that can be tailored to meet the specific needs of your business.
Expert Interpretation However complex your order, our friendly, competent experts are on hand to help interpret customer drawings, customer part numbers and NATO stock numbers (NSN) quickly and efficiently. Bespoke Kitting Service Our kitting service saves you valuable production time and can be customised to meet virtually any of your wiring requirements. Available conveniently bagged or mounted on easy-peel cards for quick, trouble-free access, the kits ensure markers are available wherever and whenever you require them. We can provide you with either a single kit or a complex series of kits that can contain loom references, mounting instructions and quality control information alongside the marker itself, which drives down the time and cost of installation. Simply provide the cable schedules and we will manufacture the entire markers and sleeving required for your train, plane or vessel, in either one master kit or a series of complex sub kits. Materials are supplied bagged, coiled, cut to length to the required quantities or as part of individual kits. We also offer a private label service for client partners. Integrated Manufacturing Options We already integrate with many existing manufacturing systems, such as JIT, KanBan etc. Daily, weekly, monthly or even yearly schedules can be catered for, as can buffer stock, consignment stock, and ship to stock schemes tailored to meet the needs of a customer’s individual system(s).
CSi
customised service interface
Outstanding Customer Care Our customer service is legendary. Friendly, knowledgeable and approachable, our team of experts will help you decipher complex orders and advise you on the best choice of materials and print processes. This ensures you get what you want, when you want it, and where you need it. Vendor rating schemes indicate that our customer service record is second to none, with our quality and delivery performance consistently achieving 100% scores. We make a point of actively tracking all orders through our manufacturing ERP system and each order remains a priority until it is delivered. A contract review of every order ensures that we meet each customer’s individual and specific order requirements accurately.
itag
next generation cable ID
ID
Our innovative computerised cable identification system enables you to print on-demand, in-house virtually any way you want - at a competitive price.
The itag system combines the ‘best of breed’ thermal transfer printers, specialist high performance ribbons, and intuitive bespoke software with high performance sleeves to create a fast, durable, in-house computer marking solution. Drive Down Costs With itag you have total control plus the capability to print a wide variety of reliable marking solutions extremely quickly and cost-effectively. The software system runs on any Windows compatible operating system. You can harness existing cable schedules by importing data straight onto the marker. This not only cuts time and labour costs associated with individual cable marking, it also reduces errors that can occur when translating data from schedules to final indents. Drag and Drop You can 'drag and drop' data from existing programs or import data from a wide range of packages, such as CAD or Microsoft programs. CAD Design
Custom Made Designs Itag's clever 'designer feature' offers you
Digital media
hundreds of ready-made templates, covering the whole range of cable, wire, panel and transfer labels. You can also design your own templates
XL spreadsheet
which could include printing instructions on the liner. Rapid Pre-Print Service From Siegrist If you’d rather hand everything over to us, we offer a fast 24/48/72 hour pre-print service. Simply email us your schedules and we’ll do the rest. Individual item
Unlimited multiples
CSi Kitting
Industry standard software functions and shortcuts include: • Auto width and font correction • Quick print • Counter function (alpha/numeric) • Reverse print order • Multiple copies • Collation
product configurator
Grade
Material
Product Selection - Consideration Application
Protection
Operating Temperature
Electrical Insulation
Semiconductive to 30kV
Economy
Strain relief Encapsulation Abrasion, UV etc
Stretch, Slip, Shrink, Sheath, Kitted
Specification
Low Fire Hazard
Fluid Resistance
Space & weight saving. Thinwall variants
LUL Spec BS6853 etc
BS, D.Stan, MIL, ISO, IEC, UL, LUL, NSA, etc
-200C to +250C
Fuels, Hydraulic oils etc
Continuous Operating Temperatures -70C
-4OC
Elastomeric Stretch On
-65
Slip On
Neoprene OSC, OSK & OSX
-65
100C
150C
180
Low Fire Hazard Silicone OSLH (340)
-65
Part/Fully Fluorinated Silicone OSLF & OSFF
180 200 250
High Strength Silicone OSF
-65
pvc OSM & OSMP
-65
pvc OSB Class 85T & 105T
70 105 250
ptfe OSTW, OSSTW & OSHW
-40
Polyolefin Dual Wall OSDW
-40
Polyolefin Low Fire Hazard OSNH
-40 -40 -55 -75
70
PVC-Nitrile
OSLH
Silicone
OSF
Silicone
OSLF
Silicone
OSS
Silicone
OSS (CL)
Silicone
OSS (VO)
Silicone
OSFF
Silicone
OSM
PVC
OSMP
PVC
OSMC
PVC
OSB
PVC
ULPVC
PVC
OSTW
PTFE
OSSTW
PTFE
OSHW
PTFE
OSDW (3:1)
Polyolefin
OSDW (4:1)
Polyolefin
OSNH
Polyolefin
OSNH (TW)
Polyolefin
FPVC
PVC PVC Polyolefin
105
SCM2
Polyolefin
OSNE
Neoprene
Polyolefin Dual Wall Low Fire Hazard W3NH pvc FPVC & LFT (Layflat)
105
OSNN
MOD. Elastomer
Polyolefin Dual Wall Flame Retarded SCM2
120
OSCH (105)
Polyolefin
Modified Elastomers OSNE & OSNN
120
OSCH (125)
Polyolefin
OSCH (135)
Polyolefin
Kynar OSKN
135 175 200
Fluoro Polymer OSFEP
200
Viton OSVT
250
ptfe OSPE
-50
Neoprene
OSNT
W3NH
-55
-65
Neoprene
OSX
OSLFT
Polyolefin OSCH (105/125/135), OSH & OSR
-55
Neoprene
OSK
105
-55
-200
250C
100
-65
-65
200C
70
Silicone OSS
-65
Heat Shrink On
50C
-25 pvc/nitrile OSNT
-
Braided Sheathing Sleeve On
0
OSC
Polyester SS
-25
Acrylic Coated 1kV & 3kV OSAG
-70
Silicone Rubber Coated 1kV - 7kV OSBOG
-70
Low Fire Hazard 1kV OSVSR
150 155 200 250
Welcome to our easy-to-use product configurator. First select the type of material (silicone, neoprene etc) you require from the column on this page. Read across the columns to check if the material is available in the form (continuous sleeving, markers etc) you want and check the description to make sure it is suitable. Open out the page to find out about technical details such as physical properties, fire hazard properties, temperature range and so on.
OSH
Polyolefin
OSH 3:1
Polyolefin
OSR
Polyolefin
OSKN
Kynar
OSFEP
Fluoro Polymer
OSVT
Viton
OSPE
PTFE
SS
Polyester
OSAG
Acrylic Glass
OSBOG
Silicone Glass
OSVSR
Glass Sheathing
Attained ARB (latterly CAA) approval
1975
Attained MOD Defence Standard 05-24 approval
1982
1990s
Developed unique printing process for PTFE markers without pre-etching
120ºc
150ºc
Land and sea military vehicles/craft,
-65ºc
200ºc
250ºc
Y
control panel manufacturers
Y
-65ºc
200ºc
300ºc
Y
-65ºc
180ºc
250ºc
Y
-30ºc
200ºc
250ºc
Y
-80ºc
250ºc
300ºc
-65ºc
175ºc
Y
Y
-65ºc
70ºc
Y
Y
-65ºc
70ºc
-40ºc
Y Y
250ºc
-65ºc
85ºc/105ºc
Y
-20ºc
105ºc
Y
-65ºc
250ºc
Y
D2c
3
1.5
2
D3
2.5
1.5
4
4
2
Y
200%min 5.5min
4
2
Y
180%min
2
1.5
Y
260%min
3
1.5
2 Y
Anti - mould BS 2011 Part 2.I.J
BS 6746 C
International RCC Markers
Flex insulation BS 2848.Type
MIL - I - 23053/5
MIL - I - 23053/12
UL Approved
Y
D5
OSC
Neoprene
Y
Neoprene
OSK
Neoprene
Neoprene
OSX
Neoprene
Y
4
Y
Y
Y
OSNT
PVC-Nitrile
OSNT
PVC-Nitrile
OSLH
Silicone
OSLH
Silicone
Y
OSF
Silicone
OSF
Silicone
Silicone
OSLF
Silicone
5
5a/b/c
Y
2.5
1.5
D1
3
Y
2.5
1.5
D1
3
Y
Y
Y
Y
OSLF
Y
Y
Y
OSS
Silicone
OSS
Silicone
OSS (CL)
Silicone
OSS (CL)
Silicone
Y
OSS (VO)
Silicone
OSS (VO)
Silicone
Silicone
OSFF
Silicone
Y Y
Y
Y
OSFF
3
Y
Y
Y
OSM
PVC
OSM
PVC
3
Y
Y
Y
OSMP
PVC
OSMP
PVC
Y
OSMC
PVC
OSMC
PVC
OSB
PVC
OSB
PVC PVC
D4
230%min
Y D1
280%min
Neoprene
OSK
Y
Y
Y
OSC
Y
Y
2
Y
Y
Notes
1c
D4
3
Y
Material
OSX
D5
3
Y Y
1a
Grade
Colour
Y
3
Y
UL224 VW -1Flame Tesr
BS 3858 (1992) Type
1a
UL94 V-O
BS 3858 (1965) Type
LUL R.M.E. 716, Iss.B
LUL 2-01001-002 (E1042 A6)
BS 6853
DEF STAN 59-97, Type
1 1
Y
2
4
Y
400ºc
DEF STAN 59-15, Type
BS G198, Part 4, Type
BS G198, Part 3, Type
BS G198, Part 2, Type
BS G198, Part 1, Type
Shrink ratio
1
350%min
275%min
Abrasion resistant
Radial stretch when fitted (BORE X)
Tensile strength (MPa)
400%min
D2a
1.5
Y
Y
70ºc
Y
Elongation @ break
Low smoke Zero halogen Self extinguishing
Flame retardant
Y
150% AV
D2a
American standards
Binding and identification
3
Y
Y
Y
ULPVC
PVC
ULPVC
6
Y
Y
Y
OSTW
PTFE
OSTW
PTFE
PTFE
OSSTW
PTFE
Y Y
7
D6
6
Y
Y
Y
OSSTW
D6
6
Y
Y
Y
OSHW
PTFE
OSHW
PTFE
D6
Y
-65ºc
250ºc
400ºc
Y
Y
Global carriers, infrastructure equipment,
Y
-65ºc
250ºc
400ºc
Y
Y
7
Y
-50ºc
110ºc
Y
250%min
3:1
OSDW (3:1)
Polyolefin
OSDW (3:1)
Polyolefin
Y
-55ºc
110ºc
Y
200%min
4:1
OSDW (4:1)
Polyolefin
OSDW (4:1)
Polyolefin
2:1
Y
OSNH
Polyolefin
OSNH
Polyolefin
Y
Y
OSNH (TW)
Polyolefin
OSNH (TW)
Polyolefin
Y
Y
FPVC
PVC
FPVC
PVC
Y
OSLFT
PVC
OSLFT
PVC
Y
W3NH
Polyolefin
W3NH
Polyolefin
Y
SCM2
Polyolefin
SCM2
Polyolefin Neoprene
Commercial, industrial and military vessels Power/Utilities
Y
-40ºc
105ºc
175ºc
105ºc
Y
380%min 7.0min
2:1
-35ºc
105ºc
Y
200%min
2:1
Y
-40ºc
105ºc
Y
Y
-40ºc
175ºc
105ºc
control equipment, offshore
Y
-70ºc
120ºc
200ºc
renewable energy, water
Y
-75ºc
120ºc
215ºc
Y
-55ºc
105ºc
Y
-55ºc
125ºc
Y
-40ºc
135ºc
Y
-55ºc
135ºc
Y Y Y
Y Y Y
120ºc
Y Y Y
Y
Y
Y 225ºc
Y
Y
350%min 12.0min
Y
Y
OSNE
Neoprene
OSNE
Y
Y
OSNN
Mod. Elastomer
OSNN
MOD. Elastomer
Y
Y
OSCH (105)
Polyolefin
OSCH (105)
Polyolefin
Y
Y
OSCH (125)
Polyolefin
OSCH (125)
Polyolefin
Y
Y
OSCH (135)
Polyolefin
OSCH (135)
Polyolefin
Y
Y
OSH
Polyolefin
OSH
Polyolefin
Polyolefin
OSH 3:1
Polyolefin
2:1
300%min
2:1
200%min
2:1
250%min 10.0min
2:1
225ºc
Y
Y
250%min 10.0min
3:1
225ºc
Y
Y
400%min 14.0min
2:1
Y
-55ºc
175ºc
300ºc
Y
Y
150%min 35.0min
2:1
Y
-200ºc
200ºc
Y
Y
300ºc
Y
Y
250%min 1 10.0min
-67ºc
250ºc
400ºc
Y
Y
250%min
0ºc
150ºc
Y
Y
Y
-25ºc
155ºc
200ºc
Y
Y
Y
-70ºc
200ºc
250ºc
Y
Y
Y
-70ºc
250ºc
450ºc
Y Y Y
Y
Y
6b
135ºc
Continuing to develop and supply world class cable marking, identification and protection solutions worldwide…
Y
6a
350%min
200ºc
Y
10A
135ºc
Celebrating 70 years in business
Y
Y
10B
-55ºc
Y
Y
Y
2:1
-55ºc
Y
8
Y
2:1
Y
-55ºc
15
Y
3:1
Y Y
8
3:1
Y Y
Y
15
2:1
Y
Y
2005
380%min 7.0min
-40ºc
-55ºc
hospital infrastructure
Y
Y
Y
Equipment, materials,
Y Y Y
Y
Oil & gas, generation and
Medical
2004
350ºc
Y
1.5
1
Rail /Mass transit
7
Marine
2003
250ºc
Y Y Y Y
1
Defence standards
Communications telecom manufacturers and network providers
Introduced computerised ‘in-house’ marking system
-65ºc
Y
Y
Component, PCB and
2001
Temperature max short period
-65ºc
Y
Mass transit, rolling stock, track and
1993
Attained BS EN ISO 9001:2000 approval
Attained AECMA-EASE AS9100 approval
Temperature + working
Y
1.5
4
Y
Aerospace standards
4 4
Y
Military/Defence
Rail
Pioneered development of mass-transit low fire hazard products for London Underground
95ºc 95ºc
Electronics
1989
-65ºc
Physical properties
Y
-65ºc
signalling equipment
Became de facto producer of LUL cable markers
95ºc
Y
weapon systems, radio communications
Attained BS 5750 approval by British Telecom
-65ºc
Y
Siegrist introduced specialist sleeving tools
1964
Y
Limited fire hazard properties
Radial stretch for fitting (BORE X)
1935
Aircraft, airlines, avionic products, satellite and space
Temperature - working
Swiss born Emil Siegrist founded company to manufacture rubber sleeves for finishing cables
Stretch On
Aerospace/Aviation 1934
Temperature working range
Application
Push On
identification excellence recognised worldwide
Shrink On
definitive dates
Y
Y 1a/2b
11A/B
11B
Y
Y
Y
Y
Y
Y
OSH 3:1
Y
Y
Y
OSR
Polyolefin
OSR
Polyolefin
2b
Y
Y
Y
2a
Y
Y
Y
Y
OSKN
Kynar
OSKN
Kynar
3:2
OSFEP
Fluoro Polymer
OSFEP
Fluoro Polymer
2:1
Viton
OSVT
Viton PTFE
Y 4:1
20 12A
3
Y
Y
Y
Y
OSVT
Y
Y
OSPE
PTFE
OSPE
Y
SS
Polyester
SS
Polyester
OSAG
Acrylic Glass
OSAG
Acrylic Glass
7.5kV
OSBOG
Silicone Glass
OSBOG
Silicone Glass
Y
OSVSR
Glass Sheathing
OSVSR
Glass Sheathing
4a 21B
5b
Y
Y
Y
Y
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Silicone rubber has great resilience and elasticity, and it retains these properties over a wide range of temperatures. • Semi-conductive, for use in areas requiring a degree of conductivity and/or anti-static conditions.
•
•
•
•
•
•
•
•
•
•
•
•
• Specifically formulated for American Market. • Flexible, fluorosilicone rubber sleeving, that exhibits excellent fluid resistance e.g. Kerosene, Skydrol.
•
•
•
•
•
•
• Economic choice, particularly suitable where overall cable diameters have to be kept to a minimum. • Par-O-Cut® version of OSM for ease of handling and installation. • Very economical. Applications include cable jackets and extra electrical and mechanical protection for bundled cables. • Electrical insulation and binding for conductors and connections of electrical equipment. Two thermal classes available.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• This material exhibits good resistance to mineral oils, aromatic fuels, etc. • A synthetic elastomer with unique flame temperature index performance. LUL approved for mass transit.
• Heatshrink inner adhesive liner melts and flows to seal and encapsulate components or splices contained within. • As above (OSDW) with a 4:1 shrink ratio.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• High temperature heatshrink providing semi-rigid, flame retardant, abrasion and cut-through resistant strain relief. Excellent resistance to oils, acids and fuels. Extreme low temperature performance and a low shrink temperature (110ºc).
•
•
•
•
• An extremely mechanical and chemical resistant heatshrinkable tubing for high temperature application. Non-meltable & self-extinguishing, and is designed for the insulation and covering of harnesses, within hazardous areas.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rail Siegrist-Orel Limited Hornet Close
• A non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. • A thin wall non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. LUL approved for mass transit. • High quality, economical PVC Heatshrink Sleeving. • Layflat, very thin wall PVC Heatshrink most commonly used for electronic component covering. • Flame retardant adhesive lined heatshrink for ‘below ground’ mass transit applications. LUL approved. • Flame retardant adhesive lined heatshrink for ‘above ground’ mass transit applications. LUL approved.
Electronics
Pysons Road Industrial Estate
• Insulating material for the American market with superior thermal, mechanical and electrical properties. • Excellent resistance to oils, acids and fuels. Use in harsh and extreme conditions.
•
•
Military/Defence
• FABsil silicone has high tear-strength, good flame-retardant properties. • Similar properties to FABsil (OSF), but with the addition of fluorination which offers a resistance to fuels, lubricants and hydraulic fluids.
•
•
Aerospace/Aviation
Broadstairs Kent CT10 2LQ
• As OSTW but with super thin wall for tighter applications. • As OSTW but with heavy wall for superior voltage, thermal and strain relief applications.
•
who we work for
• Penetrant printed version of OSC. • Economical industry standard binding sleeve.
•
•
identification excellence recognised worldwide
A high-grade sleeve containing no natural rubbers, yet providing good elasticity and resistance to oils and greases.
•
•
contact
Kit bags
•
•
Easy-Peel Kit Card
•
Kit boxes
•
Resistor colour coded
•
Description
Markers
•
Par-O-Cut ®
•
Slit cut
Pre-lubricated
•
Spiral cut
Sleeving
Cut sleeves (>1mm)
Form
Communications +44 (0) 1843 865241
t
+44 (0) 1843 867180
f e
Marine
info@siegrist-orel.co.uk
• Highly flexible, flame-retardant, abrasion resistant, elastomer combined with mechanical toughness. • Very flexible and self-extinguishing heatshrink, resistant to attack by chemicals, oil and fuels, high abrasion, specifically developed for Aerospace and Military applications.
Power/Utilities
• Commercial grade light-weight, flexible polyolefin tubing, with a smooth glossy external finish. • Commercial flame retarded, low shrink temperature, heatshrink. • Commercial very flexible, thin wall, flame retardant heat-shrinkable polyolefin tubing, for covering irregular shaped components and general purpose use. • Military Grade heatshrink which is extremely flexible and flame retarded and meeting a wide range of defence and industrial applications.
Medical
• As above (OSH) with a 3:1 shrink ratio. • Military Grade Semi-Rigid and flame retarded heatshrink which meets a wide range of defence and industrial applications - particularly suitable for strain relief.
high performance cable identification and protection systems
Outstanding chemical and solvent resistant heatshrink operating over a wide temperature range. • A self-extinguishing, abrasion-resistant braided sheathing used for the enclosure and protection of cables and wires. • A braided fibreglass sleeving coated with acrylic resin providing good mechanical resistance and dielectric strength. • UL approved silicone rubber coated braided glass providing good mechanical and electrical resistance. • LUL approved glass braided sheathing, limited fire hazard for use in mass transit industry.
www.siegrist-orel.co.uk
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Silicone rubber has great resilience and elasticity, and it retains these properties over a wide range of temperatures. • Semi-conductive, for use in areas requiring a degree of conductivity and/or anti-static conditions.
•
•
•
•
•
•
•
•
•
•
•
•
• Specifically formulated for American Market. • Flexible, fluorosilicone rubber sleeving, that exhibits excellent fluid resistance e.g. Kerosene, Skydrol.
•
•
•
•
•
•
• Economic choice, particularly suitable where overall cable diameters have to be kept to a minimum. • Par-O-Cut® version of OSM for ease of handling and installation. • Very economical. Applications include cable jackets and extra electrical and mechanical protection for bundled cables. • Electrical insulation and binding for conductors and connections of electrical equipment. Two thermal classes available.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• This material exhibits good resistance to mineral oils, aromatic fuels, etc. • A synthetic elastomer with unique flame temperature index performance. LUL approved for mass transit.
• Heatshrink inner adhesive liner melts and flows to seal and encapsulate components or splices contained within. • As above (OSDW) with a 4:1 shrink ratio.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• High temperature heatshrink providing semi-rigid, flame retardant, abrasion and cut-through resistant strain relief. Excellent resistance to oils, acids and fuels. Extreme low temperature performance and a low shrink temperature (110ºc).
•
•
•
•
• An extremely mechanical and chemical resistant heatshrinkable tubing for high temperature application. Non-meltable & self-extinguishing, and is designed for the insulation and covering of harnesses, within hazardous areas.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rail Siegrist-Orel Limited Hornet Close
• A non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. • A thin wall non-halogen heat-shrinkable tubing where low fire-hazard properties are mandatory. LUL approved for mass transit. • High quality, economical PVC Heatshrink Sleeving. • Layflat, very thin wall PVC Heatshrink most commonly used for electronic component covering. • Flame retardant adhesive lined heatshrink for ‘below ground’ mass transit applications. LUL approved. • Flame retardant adhesive lined heatshrink for ‘above ground’ mass transit applications. LUL approved.
Electronics
Pysons Road Industrial Estate
• Insulating material for the American market with superior thermal, mechanical and electrical properties. • Excellent resistance to oils, acids and fuels. Use in harsh and extreme conditions.
•
•
Military/Defence
• FABsil silicone has high tear-strength, good flame-retardant properties. • Similar properties to FABsil (OSF), but with the addition of fluorination which offers a resistance to fuels, lubricants and hydraulic fluids.
•
•
Aerospace/Aviation
Broadstairs Kent CT10 2LQ
• As OSTW but with super thin wall for tighter applications. • As OSTW but with heavy wall for superior voltage, thermal and strain relief applications.
•
who we work for
• Penetrant printed version of OSC. • Economical industry standard binding sleeve.
•
•
identification excellence recognised worldwide
A high-grade sleeve containing no natural rubbers, yet providing good elasticity and resistance to oils and greases.
•
•
contact
Kit bags
•
•
Easy-Peel Kit Card
•
Kit boxes
•
Resistor colour coded
•
Description
Markers
•
Par-O-Cut ®
•
Slit cut
Pre-lubricated
•
Spiral cut
Sleeving
Cut sleeves (>1mm)
Form
Communications +44 (0) 1843 865241
t
+44 (0) 1843 867180
f e
Marine
info@siegrist-orel.co.uk
• Highly flexible, flame-retardant, abrasion resistant, elastomer combined with mechanical toughness. • Very flexible and self-extinguishing heatshrink, resistant to attack by chemicals, oil and fuels, high abrasion, specifically developed for Aerospace and Military applications.
Power/Utilities
• Commercial grade light-weight, flexible polyolefin tubing, with a smooth glossy external finish. • Commercial flame retarded, low shrink temperature, heatshrink. • Commercial very flexible, thin wall, flame retardant heat-shrinkable polyolefin tubing, for covering irregular shaped components and general purpose use. • Military Grade heatshrink which is extremely flexible and flame retarded and meeting a wide range of defence and industrial applications.
Medical
• As above (OSH) with a 3:1 shrink ratio. • Military Grade Semi-Rigid and flame retarded heatshrink which meets a wide range of defence and industrial applications - particularly suitable for strain relief.
high performance cable identification and protection systems
Outstanding chemical and solvent resistant heatshrink operating over a wide temperature range. • A self-extinguishing, abrasion-resistant braided sheathing used for the enclosure and protection of cables and wires. • A braided fibreglass sleeving coated with acrylic resin providing good mechanical resistance and dielectric strength. • UL approved silicone rubber coated braided glass providing good mechanical and electrical resistance. • LUL approved glass braided sheathing, limited fire hazard for use in mass transit industry.
www.siegrist-orel.co.uk