How to build A UnaBox First of all lets discover what a UnaBox is. A UnaBox it’s a box that has a little trick to open it. So let’s Find out how to build our own.
First of all here is the materials you’re going to need to built it: Materials: Hardwood board 27.5cm*57.5*1.5cm thick Thin wooden peg 3mm*20mm for the locking pin Screw ,4mm *60mm for the cover pivot Wood glue Natural wax
Tools Band saw or small handsaw Carpenters square Pencil Drill press or drill Clamps File Sanding block with sandpaper, various grits
Ohh! Almost forgot . You can download the plans in www.makezine.com/20/unabox
1st step Cut the pieces like in the plans you downloaded with the right measures so the pieces fit tight Or , if you think that you wouldn’t do a very good job you could give the drawings to a carpenter and let him do the hard part. 2nd step Glue all the pieces like in the sketch Besides the top pieces These two right here It’s really if you can understand the diagram At the right.
If you have some difficulties assembling it go to http://www.youtube.com/watch?v=MlnLVAajYLs Basically it’s that what you need to built it.
Now , how to open it.
It used to be there
first , remove the pin
then move this piece
push back the hole cover
and the rotate the cover
And here is your own Now you can store your most precious things without anyone stealing it.