2019 Mondraker Dealer Book

Page 1


I

N

D

E

X

TECHNOLOGIES

4

ALL MOUNTAIN-ENDURO

44

XC PRO

82

Forward Geometry Zero Suspension System Stealth / Stealth Carbon Stealth Carbon Air IST-EVO Avant Geometry e-MTB - e-Powered by Bosch e-MTB - Shimano Steps E8000 MTB

6 8 10 11 12 14 16 18

Foxy Carbon 29 _ FAQs Foxy Carbon XR 29 Foxy Carbon RR 29 Foxy Carbon R 29 Foxy 29 _ FAQs Foxy XR 29 Foxy 29 Foxy Carbon 27’5 _ FAQs Foxy Carbon XR 27’5 Foxy Carbon R 27’5 Foxy 27’5 _ FAQs Foxy XR 27´5 Foxy 27’5

46 48 50 52 54 56 58 60 62 64 66 68 70

Chrono Carbon RR Chrono Carbon R Chrono RR Chrono R Chrono

84 86 88 90 92

XC SPORT / WOMEN

94

Phase S 29 Phase 29 Phase 27’5 Neva S Neva

96 98 100 102 104

XC RACE

72

KIDS

106

Podium Carbon_ FAQs Podium Carbon RR Podium Carbon R Podium Carbon

74 76 78 80

Factor 26 Factor 24 Leader 24 Leader 20 Leader 16

108 110 112 114 116

DOWNHILL

20

Summum Carbon Pro Team Summum Carbon Pro Summum Pro Summum

22 24 26 28

SUPER ENDURO

30

Dune Carbon _ FAQs Dune Carbon XR Dune Carbon R Dune _ FAQs Dune R Dune

32 34 36 38 40 42


e-MTB ALL MOUNTAIN

118

SPARE PARTS

156

Crusher Carbon + _ FAQs Crusher Carbon XR+ Crusher Carbon R+ Level _ FAQs Level RR Level R Crafty + _ FAQs Crafty RR+ Crafty R+

120 122 124 126 128 130 132 134 136

e-MTB TRAIL

138

Chaser + _ FAQs Chaser XR+ Chaser + Panzer R Prime Carbon SX+ Prime R+ Prime + Prime 29

140 142 144 146 148 150 152 154

Summum Carbon Summum Dune Carbon Dune Foxy Carbon 29 Foxy Carbon 27´5 Foxy 29/27´5 Podium Carbon Chrono Carbon Chrono Factor 26 / 24 Crusher Carbon + Crafty + / Level Chaser + Prime + / Prime 29

158 160 162 164 166 168 170 172 174 175 176 178 180 182 184

CREDITS

185



T

E

C

H

N

O

L

O

G

Y


FORWARD GEOMETRY Technology 2019 makes the seventh season for our geometry concept that turns every Mondraker into a bike with unique riding benefits. Forward Geometry boosts performance far above average mountain bikes. Mondraker’s Forward Geometry has proven to be the benchmark for today’s high-end performance mountain bikes and it is one of our most unique leading technologies to date. Every year we keep refining the concept and also for 2019 we have applied slight geometry changes. These even further improve performance and increase riding efficiency and control. SHORTER FORK OFFSET Main news this season is the introduction of shorter fork offsets for both 27.5” and 29” bikes. This perfectly matches our Forward Geometry and adds substantial performance gains: increased stability at high speed, better front wheel control and a dramatically improved front tire grip. Extensive testing has proven that a shorter fork offset unleashes its superior benefits in combination with our genuine and distinctive Forward Geometry concept with its super responsive and direct steering. featuring FG30mm stem and long reach. The increase in trail boosts steering stability. The result? A shorter offset combined with the Forward Geometry translates into a more playful ride and the great feeling that you can attack harder in corners with extra confidence and added grip. As a bonus, you gain a more enjoyable and faster ride overall. Forward Geometry’s main advantages are an increased safety, more uphill precision and more confident riding on steep chutes. At high speed there is a more reactive, precise and direct handling. Improved grip and overall control provide more stability even in technical and rough terrain. For 2019 Mondraker’s Forward Geometry models are equipped with standard FG30 stems (FG20-30 on the Summum DH models). Moreover we still offer FG10 and FG20 versions upon request, suitable for riders that are more accustomed to the original FG concept and more extreme riding. Forward Geometry (FG) gains popularity in the market as the geometry benchmark for high-end mountain bikes. For 2019 season we are offering our largest FG models collection to date. Based on a geometry with longer reach and longer top tubes the riding position with FG30 mm stem is perfectly well balanced for every bike category and application. Our proprietary FG30 stem compensates top tube length increase on all FG models and on every frame size. Front centre length increases and thereby inspires confidence in riding. This will allow you to ride faster, easier and above all have a more enjoyable riding experience.

ADVANTAGES: Increased safety on steep chutes Front centre is longer, the front axle is more advanced compared to a standard geometry. This increases stability and prevents flipping over in technical and steep terrain, with added safety and more confidence-inspiring riding due to a slacker angle perception. Confidence at high speed The longer wheelbase increases bike stability whatever the terrain is. Direct steering The combination with our proprietary FG30 stem improves the steering precision resulting in a highly responsive handling. Uphill precision The longer front centre keeps the front wheel on the ground and avoids unwanted wheelies, allowing you to ride very steep climbs easier. Stability in technical and difficult areas FG sets an improved weight balance between the front and rear wheel providing more stability in technical and rough terrain with better grip and improved overall control. You can find Mondraker’s proprietary Forward Geometry across the entire 2019 range of Summum, Dune, Foxy, Factor 24 & 26, Crusher +, Level, Crafty +, Chaser + & Panzer series models.


KEY ARGUMENTS: MONDRAKER GEOMETRY BENCHMARK UNIQUE GEOMETRY THAT PROVIDES SUPERIOR MANEUVERABILITY UNLIKE THE REST OF THE MODELS ON THE MARKET INCREASED CONTROL, MORE SAFETY AND CONFIDENCE-INSPIRING MORE STABILITY IN ROUGH TERRAIN DIRECT AND PRECISE STEERING

7


ZERO SUSPENSION SYSTEM Technology Zero is Mondraker’s proprietary highly efficient, best performing and super capable suspension system. Zero is individually designed, set up and optimised for each Mondraker full suspension model to provide best pedalling efficiency and suspension performance. That means each model across the range, from little Factor 24 trail models up to Summum Carbon World Cup & World Championship winning downhill bikes there’s an individually perfected geometry. Zero is a dual link design that belongs to the category of virtual suspension systems. The most unique and exclusive feature of Zero is that the shock floats between the two suspension links and is compressed from both ends. This makes the rear suspension extremely sensitive on small bumps AND big hit capable - truly the most acknowledgeable and astounding feature of every Mondraker full suspension bike! Zero’s superior technologies’ main advantages are: Zero power loss - a completely stable and highly efficient ride when pedalling, Zero pedal kickback minimum chain stay length increase throughout the suspension travel, Zero brake jack – isolated braking and suspension forces, and what we call Zero bumps, its great ability to soak up any type of bump keeping the rear wheel efficiently planted on the ground.

ADVANTAGES: Zero power loss High pedalling efficiency. The power applied to pedals is transformed to immediate forward motion without any compression or extension of the rear shock. Zero pedal kickback Chain stay length increase throughout the suspension travel is minimal so pedalling is as effective and efficient as possible. Zero brake jack Rear brake forces don’t work against suspension forces. The rear shock works supple and freely and absorbs impacts without any suspension stiffening caused by rear brake action. Zero bumps The most remarkable feature of the system is its excellent suppleness on rough terrain and a completely stable ride when pedalling. You can find Mondraker’s exclusive and patented Zero Suspension System throughout our entire suspension mountain bike range.

KEY ARGUMENTS: ZERO IS MONDRAKER’S EXCLUSIVE AND PATENTED SUSPENSION SYSTEM ZERO IS OPTIMISED FOR EACH BIKE CATEGORY, FRAME SIZE AND SUSPENSION TRAVEL, PROVIDING THE BEST ABSORPTION AND PEDALLING EFFICIENCY ZERO STANDS OUT FOR OFFERING THE BEST OVERALL PERFORMANCE. IT REMAINS STABLE EVEN UNDER HEAVY PEDALLING AND PROVIDES THE MOST ACTIVE, SENSITIVE AND SUPPLE RIDE IN ROUGH TERRAIN COMPARED TO ANY OTHER SYSTEM IN THE MARKET


9


STEALTH /STEALTH CARBON / STEALTH CARBON AIR Technology Stealth stands for the most advanced industrial design and frame structure optimisation technology within the Mondraker range. Stealth Alloy encompasses all processes in the creation of a frame - from the calculation of the most precise details, the industrial design up to the specific production of each individual tube. Each tube and part is carefully designed to carry out a specific function while striving for the lowest possible weight. Stealth technology is evolving every year with further optimised shapes and internal updates to deliver the best riding experience in our aluminium frames. You can find Stealth Alloy technology in Summum, Dune, Foxy, Factor 24 & 26, Chaser +, Crafty + and Level series models.

Stealth Carbon is the most advanced technology for carbon fibre development and optimisation in the Mondraker range. This constantly evolving technology brings all the experience gained in making aluminium frames to top of the range carbon bikes to meet the highest requirements on innovation, maximum quality, minimum weight and strength. The precise placement of carbon fibre layers along with specific positioning and direction of the different quality fibres for each bike type and model is a crucial technique. The result is a frame with the best strength / structural rigidity / trail buzz absorption / lightness ratio, exceptional reliability and a very attractive and truly unique “100% Mondraker” look. Summum Carbon, Dune Carbon, Foxy Carbon, Chrono Carbon and the spectacular Crusher Carbon + are the flagship models featuring Stealth Carbon technology.

ADVANTAGES: Advanced Industrial Design

ADVANTAGES:

Distinctive looks

Distinctive looks

Best-in-class lightweight/structural stiffness

Leading carbon manufacturing process Best strength / structural rigidity / trail buzz absorption / lightness ratio

KEY ARGUMENTS: STEALTH IS MONDRAKER’S EXCLUSIVE FRAME MANUFACTURING TECHNOLOGY IN ALUMINIUM AND CARBON STEALTH PROVIDES THE BEST STRENGTH / STIFFNESS / WEIGHT RATIO ON THE MARKET STEALTH’S INDUSTRIAL DESIGN OFFERS A UNIQUE AND DISTINCTIVE HI-TECH MONDRAKER LOOK STEALTH AIR OFFERS THE BEST STIFFNESS, LIGHTEST WEIGHT AND SUPERIOR COMPLIANCE RATIO WITH A CUTTING-EDGE DESIGN AND MANUFACTURING PROCESS TECHNOLOGY


Stealth Carbon Air is the most refined and lightest carbon manufacturing process at Mondraker. Every carbon layer is specifically and carefully applied in each area of the frame with a given and specific purpose. That results in the most stylish, evolved and advanced carbon fibre frames within the Mondraker range. Cutting-edge industrial design, aero-style profile, maximum stiffness / lightest weight / superior compliance ratio are common features of Stealth Carbon Air. Trail chatter is sometimes overlooked, yet this is a critical feature especially on a highest quality carbon framesets. You will find Stealth Carbon Air on our new 2019 Foxy Carbon 29 and on our cross country racing benchmark model Podium Carbon. Especially on the Podium Carbon hardtail our FlatStays design solves this traditional problem by filtering all those extra riding vibrations. There is no the need of an extra cutaway seat stays + elastomer solution to achieve a second-to-none riding comfort on a pure Carbon hardtail frame.

ADVANTAGES: Cutting-edge Aero-style profile carbon industrial design Refined and lightest Stealth Carbon manufacturing Maximum compliance, trail buzz absorption and stiffness to weight ratio

11


IST-EVO Technology Mondraker’s proprietary Integrated Stem Technology (IST) introduces a more integrated, lighter and more compact aero-style design. Made from Stealth Carbon fibre it not only weighs in at a lightweight 128 grams but it also saves the upper headset cup and spacers’ weight. IST-EVO delivers improved rigidity and steering precision superior to traditionally designed stems. 2019 Podium Carbon stems have been further improved featuring a new design that eliminates the need of an internal stop and increases the turning radius to almost 90° degrees. A thin rubber pad is used between stem and frame for protection: neat and light. Available in 4 sizes, 75 mm, 90 mm, 105 mm and optionally 115 mm, new IST-EVO offers an optimum in pedalling position, perfect integration and maximum performance.

ADVANTAGES: Integrated, lighter and compact design Superior steering precision Unique, distinctive racing look Perfect integration: Aero-style design


KEY ARGUMENTS: INTEGRATED AERO-STYLE DESIGN, RACING LOOK IMPROVED PEDALLING POSITION FOR MAXIMUM PERFORMANCE INCREASED STIFFNESS, SUPERIOR STEERER PRECISION

13


AVANT GEOMETRY Technology Avant Geometry is an all-new concept inspired by our benchmark Forward Geometry which offers similar riding benefits and is present on Chrono Carbon, Chrono Alloy, Phase and Neva hardtail models. Avant Geometry features slightly longer top tubes compared with a standard geometry (between 20 and 30 mm longer) combined with shorter stems. This results in increased safety and confidence when riding downhills, more stability in technical and rough terrain and improved overall control. Furthermore, Avant Geometry models benefit from a slightly slacker head angle and shorter chain stay length, thus making the ride more confidence-inspiring. This will allow you to ride faster, easier and above all have a more enjoyable riding experience.

ADVANTAGES: Increased safety on steep chutes Confidence at high speed Stability in technical and difficult areas


KEY ARGUMENTS: INCREASED CONTROL, MORE SAFETY AND CONFIDENCE-INSPIRING MORE STABILITY IN ROUGH TERRAIN

15


e-MTB Technology e-Powered by Bosch Experience a new riding dimension with the leading Performance Line CX drive by Bosch. Featuring 4 different riding modes it delivers a torque of 75Nm and up to 300% of maximum pedalling assistance. Unleash the ultimate Uphill Flow with the e-MTB mode that replaces the previous Sport mode. e-MTB provides a more accurate and fully progressive response where the motor automatically adapts to your riding style. This means that in e-MTB mode the control unit automatically chooses the support your ride requires - from Tour to Turbo – just depending on the pedal pressure. All our 2019 Mondraker Bosch e-bikes feature 500Wh batteries, no matter if external PowerPack on Prime Carbon SX+ and Panzer R models or integrated PowerTube on Prime, Chaser +, Crafty + and Level models. For 2019 Prime & Chaser + (Trail) and Level (All-Mountain / Enduro) are our new PowerTube integrated battery e-MTB models with cutting-edge design and evolved frames featuring improved performance. Technology available in Chaser +, Crafty +, Level, Prime, Prime Carbon SX+ and Panzer R.

ADVANTAGES: e-MTB: Double the fun, up and down Leading e-MTB technology from Bosch Maintenance free, maximum reliability

KEY ARGUMENTS: NEW EMTB MODE, THE NEW BENCHMARK INTEGRATED POWERTUBE BATTERY ON PRIME, CHASER +, CRAFTY +, LEVEL SERIES MODELS


17


e-MTB Technology Shimano Steps E8000 MTB Shimano’s e-MTB integrated system offers the most intuitive and powerful performance and E8000 is the motor of choice on the ground-breaking Crusher Carbon + range. Among its most important features we find its compact and lightweight design, reduced Q-factor and long lasting battery with a capacity of a whopping 504Wh. On top of that the battery can be recharged directly on the bike without the need of removing it. The compact motor size allows us to realize a very low chain stay length of only 450 mm. You can select among three different levels of pedalling assistance: Eco, Trail or Boost, providing a maximum of 300% support and 70Nm engine torque. Using the Shimano e-tube app you can personalize the motor settings and customize the power delivery on Trail and Boost modes depending on your riding style. 2019 Steps E8000 is available exclusively on our full carbon, full suspension e-MTBs, the Crusher Carbon R+ and Crusher Carbon XR+ models. Technology available in Crusher Carbon +.

ADVANTAGES: e-MTB: Double the fun, up and down Leading e-MTB technology from Shimano Maintenance free, compact design, maximum reliability

KEY ARGUMENTS: CUSTOMIZABLE TRAIL AND BOOST MODES VERY COMPACT AND LIGHTWEIGHT DESIGN, SHORT CHAIN STAYS SHIMANO INTEGRATED BATTERY


19



D

O

W

N

H

I

L

L


SUMMUM CARBON PRO TEAM Downhill

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Summum 27´5 Stealth full Carbon, Zero suspension system, 205 mm travel, Forward Geometry, alloy upper link with shock eyelet bearings, 12x150 mm rear axle, 83 mm BSA bottom bracket, MAX. capacity sealed bearings, internal cable routing, ISCG 05. *Geometry kit included

SIZES

S: 400 mm / M: 400 mm / L: 400 mm / XL: 400 mm

REAR SHOCK

Fox DHX2 Factory Kashima, 222x70 mm. Settings: high and low-speed compression, high and low-speed rebound, spring preload. Super light steel (SLS) spring

REAR SHOCK SETTING

Firm compression, light rebound. Spring rate: S size 450 lbs, M size 500 lbs, L/XL size 550 lbs

FORK

Fox 40 27´5 Float FIT GRIP2 EVOL Factory Kashima, 203 mm, air spring, 1-1/8” steerer tube, 20x110 mm axle. Settings: high and low-speed compression, high and low-speed rebound, air preload

HEADSET

Onoff Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45°x45° ACB sealed bearings, geometry kit cups, external diameter 56 mm

STEM

Onoff Stoic DH Integrated FG, 20-30 mm adjustable lengt, 31.8 mm barbore, 6061 alloy

HANDLEBAR

Renthal Fatbar series 7 alloy, rise: 30 mm, width: 780 mm, 7° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Renthal, double lock-on, kevlar compound, 130 mm

SEATPOST

SDG Micro I-Beam SP-951 Carbon, diameter 31.6 mm, length 300 mm, micro-adjustment

SADDLE

SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides

FRONT BRAKE

Shimano Saint M820, 4-piston caliper, RT86 203 mm 2-piece IS 6 bolts rotor with ICE technology, resin pads with cooler

REAR BRAKE

Shimano Saint M820, 4-piston caliper, RT86 203 mm 2-piece IS 6 bolts rotor with ICE technology, resin pads with cooler

BRAKE LEVERS

Shimano Saint, ergonomic antiskid lever with servo wave, free stroke and tool less reach adjust

RIMS

DT Swiss FR1950 27’5, 33 mm external width, tubeless ready, 32 holes

SPOKES

DT competition


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1200 mm 112 mm 397 mm 597 mm

400 mm 600 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1225 mm 112 mm 422 mm 597 mm

400 mm 622 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1250 mm 122 mm 442 mm 606 mm

400 mm 647 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1280 mm 122 mm 468 mm 606 mm

MODEL

COLOR

Summum Carbon Pro Team

Light Blue / Flame Red / Carbon

S

M

L

XL

010.19106

010.19107

010.19108

010.19109

FRONT HUB

DT 240, 20x110 mm, IS 6 bolts

REAR HUB

DT 240, 12X150 mm, 36T Ratchet system, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

REAR TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

CRANKSET

Shimano Saint M825 Hollowtech II, 165 mm

CHAINRINGS

Aluminium, BCD 104, 36T

BOTTOM BRACKET

Shimano 83 mm

PEDALS

/

CHAIN

Shimano HG95, 10s

FRONT DERAILLEUR

E.13 LG1R Carbon chain guide, IFD DMB (Direct Mount Bashguard) Gen 2 Stealth Idler, Aluminum hardware, adjustable/replaceable lower armature, polycarbonate, ISCG 05, adjustable upper slider

REAR DERAILLEUR

Shimano Saint RD-M820-SS, 10s, Shadow+, short cage

SHIFTERS

Shimano Saint SL-M820 10s, low friction multi bearing, instant release, multi release, 2-way release

CASSETTE

Shimano CS-HG500-10, 11-25T, 10s

DERAILLEUR HANGER

Mondraker M063

MISCELLANEOUS

*Geometry kit included: chainstay and brake adaptors for 445 mm, 450 mm, 455 mm, 460 mm. Steering cups: +/- 1°, +/-2°

WEIGHT W/O PEDALS

15.6 kg

23


SUMMUM CARBON PRO Downhill

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Summum 27´5 Stealth full Carbon, Zero suspension system, 205 mm travel, Forward Geometry, alloy upper link with shock eyelet bearings, 12x150 mm rear axle, 83 mm BSA bottom bracket, MAX. capacity sealed bearings, internal cable routing, ISCG 05. *Optional Geometry kit

SIZES

S: 400 mm / M: 400 mm / L: 400 mm / XL: 400 mm

REAR SHOCK

Fox DHX2 Performance Elite, 222x70 mm. Settings: low-speed compression, low-speed rebound, spring preload

REAR SHOCK SETTING

Firm compression, light rebound. Spring rate: S size 450 lbs, M size 500 lbs, L/XL size 550 lbs

FORK

Fox 40 27´5 Float GRIP EVOL Performance Elite, 203 mm, air spring, 1-1/8” steerer tube, 20x110 mm axle. Settings: low-speed compression, low-speed rebound, air preload

HEADSET

Onoff Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45°x45° ACB sealed bearings, geometry kit cups, external diameter 56 mm

STEM

Onoff Stoic DH Integrated FG, 20-30 mm adjustable lengt, 31.8 mm barbore, 6061 alloy

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

SDG Micro I-Beam SP-751 Alloy, diameter 31.6 mm, length 300 mm, micro-adjustment

SADDLE

SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides

FRONT BRAKE

Shimano Zee M640, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano Zee M640, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano Zee, ergonomic antiskid lever with servo wave, tool less reach adjust

RIMS

DT Swiss FR560 27’5, 30 mm internal width, tubeless ready, 32 holes

SPOKES

CN stainless steel butted 2.0-1.8-2.0


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1200 mm 112 mm 397 mm 597 mm

400 mm 600 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1225 mm 112 mm 422 mm 597 mm

400 mm 622 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1250 mm 122 mm 442 mm 606 mm

400 mm 647 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1280 mm 122 mm 468 mm 606 mm

MODEL

COLOR

Summum Carbon Pro

White / Flame Red / Carbon

S

M

L

XL

010.19102

010.19103

010.19104

010.19105

FRONT HUB

MDK Disc Pro DH, 20x110 mm, IS 6 bolts

REAR HUB

MDK Disc Pro DH, 12x150 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

REAR TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

CRANKSET

Shimano Zee M645, alloy, reinforced steel axle, 165 mm

CHAINRINGS

Aluminium, 36T

BOTTOM BRACKET

Shimano SM-BB52, 83 mm

PEDALS

/

CHAIN

Shimano HG54, 10s

FRONT DERAILLEUR

E.13 LG1 chain guide + DMB (Direct Mount Bashguard) Gen 2 Stealth Idler, Aluminum hardware, adjustable/replaceable lower armature, polycarbonate, ISCG 05, adjustable upper slider

REAR DERAILLEUR

Shimano Zee RD-M640-SS, 10s, Shadow+, short cage

SHIFTERS

Shimano Zee SL-M640, 10s, 2-way release

CASSETTE

Shimano CS-HG500-10, 11-25T, 10s

DERAILLEUR HANGER

Mondraker M063

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 445 mm, 450 mm, 455 mm, 460 mm. Steering cups: +/- 1°, +/-2°

WEIGHT W/O PEDALS

16.2 kg

25


SUMMUM PRO Downhill

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Summum 27´5 6061 Alloy Stealth Evo, hydroformed tubing, Zero suspension system, 205 mm travel, Forward Geometry, alloy upper link with shock eyelet bearings, 12x150 mm rear axle, 73 mm BSA bottom bracket, MAX. capacity sealed bearings, internal or external cable routing, ISCG 05. *Optional Geometry kit

SIZES

S: 400 mm / M: 400 mm / L: 400 mm / XL: 400 mm

REAR SHOCK

Fox DHX2 Performance Elite, 222x70 mm. Settings: low-speed compression, low-speed rebound, spring preload

REAR SHOCK SETTING

Firm compression, light rebound. Spring rate: S size 450 lbs, M size 500 lbs, L/XL size 550 lbs

FORK

Fox 40 27´5 Float GRIP EVOL Performance Elite, 203 m, air spring, 1-1/8” steerer tube, 20x110 mm axle. Settings: low-speed compression, low-speed rebound, air preload

HEADSET

Onoff Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45°x45° ACB sealed bearings, geometry kit cups, external diameter 56 mm

STEM

Onoff Stoic DH Integrated FG, 20-30 mm adjustable lengt, 31.8 mm barbore, 6061 alloy

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

SDG Micro I-Beam SP-751 Alloy, diameter 31.6 mm, length 300 mm, micro-adjustment

SADDLE

SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides

FRONT BRAKE

Shimano Zee M640, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano Zee M640, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano Zee, ergonomic antiskid lever with servo wave, tool less reach adjust

RIMS

DT Swiss FR560 27’5, 30 mm internal width, tubeless ready, 32 holes

SPOKES

CN stainless steel butted 2.0-1.8-2.0


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1200 mm 112 mm 397 mm 597 mm

400 mm 600 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1225 mm 112 mm 422 mm 597 mm

400 mm 622 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1250 mm 122 mm 442 mm 606 mm

400 mm 647 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1280 mm 122 mm 468 mm 606 mm

MODEL

COLOR

Summum Pro

Navy / Orange

S

M

L

XL

010.19098

010.19099

010.19100

010.19101

FRONT HUB

MDK Disc Pro DH, 20x110 mm, IS 6 bolts

REAR HUB

MDK Disc Pro DH, 12x150 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

REAR TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

CRANKSET

Shimano Zee M640, alloy, reinforced steel axle, 165 mm

CHAINRINGS

Aluminium, 36T

BOTTOM BRACKET

Shimano 73 mm

PEDALS

/

CHAIN

Shimano HG54, 10s

FRONT DERAILLEUR

E.13 LG1 chain guide + DMB (Direct Mount Bashguard) Gen 2 Stealth Idler, Aluminum hardware, adjustable/replaceable lower armature, polycarbonate, ISCG 05, adjustable upper slider

REAR DERAILLEUR

Shimano Zee RD-M640-SS, 10s, Shadow+, short cage

SHIFTERS

Shimano Zee SL-M640, 10s, 2-way release

CASSETTE

Shimano CS-HG500-10, 11-25T, 10s

DERAILLEUR HANGER

Mondraker M051

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 445 mm, 450 mm, 455 mm, 460 mm. Steering cups: +/- 1°, +/-2°

WEIGHT W/O PEDALS

16.7 kg

27


SUMMUM Downhill

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Summum 27´5 6061 Alloy Stealth Evo, hydroformed tubing, Zero suspension system, 205 mm travel, Forward Geometry, alloy upper link with shock eyelet bearings, 12x150 mm rear axle, 73 mm BSA bottom bracket, MAX. capacity sealed bearings, internal or external cable routing, ISCG 05. *Optional Geometry kit

SIZES

S: 400 mm / M: 400 mm / L: 400 mm / XL: 400 mm

REAR SHOCK

Fox Van RC Performance, 222x70 mm. Settings: low-speed compression, rebound, spring preload

REAR SHOCK SETTING

Light compression, light rebound. Spring rate: S size 400 lbs, M size 450 lbs, L/XL size 500 lbs

FORK

Rockshox Boxxer Charger RC 27´5, 200 mm, DebonAir, 1-1/8” steerer tube, Boost 20x110 mm axle. Settings: Low-speed compression, rebound, air preload

HEADSET

Onoff Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45°x45° ACB sealed bearings, geometry kit cups, external diameter 56 mm

STEM

Onoff Stoic DH Integrated FG, 20-30 mm adjustable lengt, 31.8 mm barbore, 6061 alloy

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

SDG Micro I-Beam SP-751 Alloy, diameter 31.6 mm, length 300 mm, micro-adjustment

SADDLE

SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

MDK-DP1 27’5, 32 mm external width, 32 holes

SPOKES

CN stainless steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1200 mm 112 mm 397 mm 597 mm

400 mm 600 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1225 mm 112 mm 422 mm 597 mm

400 mm 622 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1250 mm 122 mm 442 mm 606 mm

400 mm 647 mm 0 mm 350 mm 445 - 460 mm 65° 73.5° 63° (+/-2°) 52 mm 1280 mm 122 mm 468 mm 606 mm

MODEL

COLOR

Summum

Black / Light Blue

S

M

L

XL

010.19094

010.19095

010.19096

010.19097

FRONT HUB

MDK Disc Pro DH, Boost 20x110 mm, IS 6 bolts

REAR HUB

MDK Disc Pro DH, 12x150 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

REAR TIRE

Maxxis Minion DHR II 27’5x2.4, Super Tacky compound, Wire bead

CRANKSET

Truvativ Ruktion 1.0, Alloy HP cast arm, 165 mm

CHAINRINGS

36T

BOTTOM BRACKET

Truvativ Howitzer XR 73 mm

PEDALS

/

CHAIN

Sram PC-951, 9s

FRONT DERAILLEUR

E.13 LG1 chain guide, Nickel Chrome protector, height adjustable to appropriate plate size, ISCG 05

REAR DERAILLEUR

Sram X7, 9s, short cage, X-actuation 1:1

SHIFTERS

Sram trigger X5, 9s, X-actuation 1:1

CASSETTE

Sram PG-950, 11-26T, 9s

DERAILLEUR HANGER

Mondraker M051

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 445 mm, 450 mm, 455 mm, 460 mm. Steering cups: +/- 1°, +/-2°

WEIGHT W/O PEDALS

16.8 kg

29



S

U

P

E

R

E

N

D

U

R

O


DUNE CARBON FAQs Super Enduro

HOW IS THE 2019 DUNE CARBON FRAME DIFFERENT TO THE ONE FROM PREVIOUS YEARS? The 2019 Dune Carbon frame shares the same front triangle as the Dune Carbon from previous seasons. What changes is the seat stay, now compatible with a 12x148 m Boost wheel, and the upper link for a shock with Trunnion mount. The lower link has also changed, now compatible with 22.2x10 mm bushings. HAS THE 2019 DUNE CARBON KINEMATICS CHANGED COMPARED WITH THE MODELS FROM PREVIOUS YEARS? The Dune Carbon 2019 kinematics remain the same, only the travel has changed as there is more shock stroke. IS THE NEW SEAT STAY COMPATIBLE WITH THE DUNE CARBON FROM PREVIOUS YEARS? The new seat stay is compatible with Dune Carbon frames from previous seasons, as long as the new link is also used. It is important to know that both shock and back wheel will have to use the new 2019 Dune Carbon standards. WHAT’S THE DIFFERENCE IN WRIGHT BETWEEN DUNE CARBON AND DUNE ALLOY? Alloy frame weight with hardware (without shock): 3.060 g. Carbon frame weight with hardware (without shock): 2.590 g. 470 g difference. IS THE KINEMATICS THE SAME IN DUNE CARBON AND DUNE ALLOY? The kinematics in both models is the same. WHAT DOES THE GEOMETRY KIT CONSIST OF? The geometry kit is included in Dune Carbon XR and in Dune Carbon XR individual frames, and it includes: 1. Steering cups set which include new sealed bearings to adjust the fork angle to +/-1°. 2. Set of rear derailleur hangers which enable to change the chain stay length to +/-10 mm, including the specific derailleur hanger. 3. –10 mm adaptor for rear brake caliper.

The geometry kits are different depending on the size and it is determined by the head tube. S and M sizes share the same one, but L size has its own exclusive head tube, as well as XL size. The steering cups in the Dune Carbon Geometry Kit are also compatible with Foxy Carbon. With the -1° steering cup the distance between axles increases in 5mm and the bottom bracket decreases in 2mm. The effective saddle angle gets 0.2° back and the effective measure of the top tube is 5 mm shorter. WHAT SHOCKS ARE COMPATIBLE? Apart from the different FOX shocks preassembled, it is also compatible with RockShox Vivid Coil or specific models as Cane Creek DB IL. However, it is not compatible with RockShox Vivid Air or Cane Creek Double Barrel Air / Oil. WHAT DISC SIZE IS THE NEW CHAINGUIDE COMPATIBLE WITH? The chainguide preassembled in all the Dune Carbon models is compatible with 30T, 32T and 34T discs. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95


WHICH LENGTH OF DROPPER POST CAN I USE FOR THE DUNE CARBON? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

164,5 mm 164,5 mm 164,5 mm 150 mm 150 mm 150 mm 150 mm 128 mm 128 mm 128 mm 128 mm 150 mm 150 mm 164,5 mm 164,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 190 mm 190 mm 190 mm 168 mm 168 mm 168 mm 168 mm 175 mm 190 mm 204,5 mm 204,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 240 mm 175 mm 200 mm 218 mm 218 mm 175 mm 200 mm 220,5 mm 245,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT

33


DUNE CARBON XR Super Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Dune 27´5 Stealth full Carbon, Zero Suspension System, 170 mm travel, Forward Geometry, carbon upper link, Boost 12x148 mm rear axle, tapered head tube, 72 mm BSA bottom bracket, MAX. capacity sealed bearings, HHG internal cable routing, ISCG 05, dedicated 1x drivetain design, ISCG 05 carbon protector, carbon mudguard. *Geometry kit included

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox DHX2 2Pos Lever Factory Kashima, 205x65 mm. Settings: Open/Firm, high and low-speed compression, high and low-speed rebound, spring preload. Super light steel (SLS) spring, Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression. Spring rate: S size 400 lbs, M size 450 lbs, L/XL size 500 lbs

FORK

Fox 36 27´5 Float FIT GRIP2 EVOL Factory Kashima, 170 mm, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: high and low-speed compression, high and low-speed rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Fox Transfer Factory Kashima internal, diameter 31.6 mm, S size: 365x100 mm, M size: 406x125 mm, L/XL size: 456x150 mm

SADDLE

SDG Fly MTN, Light PU foam, titanium rail, Cordura sides

FRONT BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjust

RIMS

DT Swiss EX1501 Spline One 27´5, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 610 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1185 mm 110 mm 445 mm 597 mm

420 mm 630 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1205 mm 110 mm 465 mm 597 mm

470 mm 655 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1230 mm 120 mm 485 mm 606 mm

510 mm 673 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1250 mm 130 mm 503 mm 615 mm

MODEL

COLOR

Dune Carbon XR

Light Blue / Flame Red / Carbon

S

M

L

XL

010.19090

010.19091

010.19092

010.19093

SPOKES

DT Competition, straight pull

FRONT HUB

DT 240, 15x110 mm, IS 6 bolts

REAR HUB

DT 240, 12x148 mm, 36T Ratchet system, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 27´5x2.5, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

34T, alloy, X-Sync 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger X01 Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram XG-1295, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M065

MISCELLANEOUS

*Geometry kit included: chainstay and brake adaptors for 440 mm. Steering cups: +/- 1°

WEIGHT W/O PEDALS

13.8 kg

35


DUNE CARBON R Super Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Dune 27´5 Stealth full Carbon, Zero Suspension System, 170 mm travel, Forward Geometry, carbon upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, MAX. capacity sealed bearings, HHG internal cable routing, ISCG 05, dedicated 1x drivetain design, ISCG 05 carbon protector, carbon mudguard. *Optional Geometry kit

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float X2 Performance, 205x65 mm. Settings: Open/Firm, high-speed compression, high-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, light rebound, air volume spacers 0.3x3

FORK

Fox 36 27´5 Float FIT GRIP EVOL Performance, 170 mm, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, steel rail, Cordura sides

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1900 Spline 27´5, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 610 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1185 mm 110 mm 445 mm 597 mm

420 mm 630 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1205 mm 110 mm 465 mm 597 mm

470 mm 655 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1230 mm 120 mm 485 mm 606 mm

510 mm 673 mm 1 mm 354 mm 430 / 440 mm 70° 75° 66 (+/-1) 37 mm 1250 mm 130 mm 503 mm 615 mm

MODEL

COLOR

Dune Carbon R

Yellow / Fuchsia / Carbon

S

M

L

XL

010.19086

010.19087

010.19088

010.19089

SPOKES

DT Champion, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 27´5x2.5, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

34T, steel, X-Sync 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M065

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 440 mm. Steering cups: +/- 1°

WEIGHT W/O PEDALS

14.3 kg

37


DUNE FAQs Super Enduro HOW IS THE 2019 DUNE FRAME DIFFERENT TO THE 2018 DUNE FRAME?

WHAT MAXIMUM DISC SIZE CAN I INSTALL IN DUNE?

The change is in the upper link, now compatible with shocks with Trunnion mount. The seat stay has also changed in the link area with the upper link.

Dune is designed for combinations of 2x and 1x discs. For the 1x combination, the biggest disc that can be installed is 36 teeth.

HAS THE 2019 DUNE KINEMATICS CHANGED COMPARED WITH THE MODELS FROM PREVIOUS YEARS?

CAN I CHANGE THE HEAD ANGLE?

The Dune 2019 kinematics remain the same, only the travel has changed as there is more shock stroke. ARE THE NEW LINK AND SEAT STAY COMPATIBLE WITH DUNES FROM PREVIOUS SEASONS? The 2019 Dune link and seat stay are compatible with previous models, but it is important to use a shock also compatible with the new Dune standards. WHAT SHOCKS ARE COMPATIBLE? In Dune, all kinds of shocks can be installed, with or without deposit, except from high-volume ones like Fox Float X2, RockShox Vivid Air or similar, and spring shocks are not compatible either.

There is a geometry kit available for Dune that consists of a set of steering cups that enable to push the head angle in 1°. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

WHAT FORK TRAVEL CAN I INSTALL? Forks up to 180mm can be used, so compared with a preassembled 160mm fork the head angle will vary in 1º and the bottom bracket height will increase 5mm. WHAT TYRE SIZE CAN I INSTALL? With a rim inner width of up to 30 mm –currently the Dune models are assembled with rims of 27 or 30 mm inner width- the biggest tyre that can be set is 27.5x2.5”, which guarantees enough space to clear the mud.

WHICH LENGTH OF DROPPER POST CAN I USE FOR THE DUNE? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

170,5 mm 170,5 mm 170,5 mm 155 mm 155 mm 155 mm 155 mm 133 mm 133 mm 133 mm 133 mm 155 mm 155 mm 170,5 mm 170,5 mm

195,5 mm 210,5 mm 210,5 mm 175 mm 195 mm 195 mm 195 mm 173 mm 173 mm 173 mm 173 mm 175 mm 195 mm 210,5 mm 210,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220 mm 220 mm 175 mm 200 mm 220,5 mm 245,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT


39


DUNE R Super Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Dune 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 170 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, Max. capacity sealed bearings, shock mudguard, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x65 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, light rebound, air volume spacer 0.6

FORK

Fox 36 27´5 Float FIT GRIP EVOL Performance, 170 mm, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, steel rail, Cordura sides

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1900 Spline 27´5, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 610 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1190 110 mm 445 mm 595

420 mm 636 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1215 mm 110 mm 470 mm 595 mm

470 mm 659 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1240 mm 120 mm 490 mm 603 mm

510 mm 680 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1264 mm 120 mm 510 mm 612 mm

MODEL

COLOR

Dune R

Flame Red / Light Blue

S

M

L

XL

010.19082

010.19083

010.19084

010.19085

SPOKES

DT Champion, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, Dual compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Minion DHR II 27´5x2.4 WT, Tubeless ready, Dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

34T, steel, X-Sync 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram XG-1275, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.9 kg

41


DUNE Super Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Dune 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 170 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, Max. capacity sealed bearings, shock mudguard, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x65 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, light rebound, air volume spacer 0.6

FORK

RockShox Yari RC Motion control 27´5, 170 mm, DebonAir, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: low-speed compression to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, steel rail, Cordura sides

FRONT BRAKE

Shimano MT500, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT500, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT500, servo wave, alloy lever

RIMS

MDK-EP1 27´5 TLR ASY, asymmetrical rim, 27 mm internal width, tubeless ready, 32 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 610 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1190 110 mm 445 mm 595

420 mm 636 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1215 mm 110 mm 470 mm 595 mm

470 mm 659 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1240 mm 120 mm 490 mm 603 mm

510 mm 680 mm -1 mm 347 mm 434 mm 68,5° 74,5° 65,5° 37 mm 1264 mm 120 mm 510 mm 612 mm

MODEL

COLOR

Dune

Navy / Orange

S

M

L

XL

010.19078

010.19079

010.19080

010.19081

SPOKES

CN round stainless steel

FRONT HUB

MDK GW 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

MDK GW 12x148 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, Dual compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Minion DHR II 27´5x2.4 WT, Tubeless ready, Dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Sram NX, 11s, Boost, 24 mm axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, steel, X-Sync

BOTTOM BRACKET

Sram GXP XR, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.7 kg

43



A

L

L

M

O

U

N

T

A

I

N

-

E

N

D

U

R

O


FOXY CARBON 29 FAQs All Mountain / Enduro WHAT SHOCKS ARE COMPATIBLE WITH FOXY CARBON 29?

WHAT SIZE SHOULD I BUY?

Apart from the different shocks preassembled, it is also compatible with FOX Float X2 or RockShox Super Deluxe Aire. Foxy Carbon 29 is installed with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas 22.2x10 mm bottom bushings are used.

The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide:

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN MY FOXY CARBON 29? Foxy Carbon 29 is compatible with up to 160 mm forks. WHAT MAXIMUM REAR TYRE SIZE CAN BE INSTALLED IN FOXY CARBON 29?

Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

Foxy 29 is compatible with rear tyres up to 63 mm wide, which would match with 29x2.5” tires, but even so it is advisable to measure the tyre before installing it as the actual measure may vary depending on the manufacturer. WHAT IS THE BIGGEST DISC THAT CAN BE INSTALLED IN FOXY CARBON 29? It is compatible even with round discs with 34 or 32 teeth in case it is oval. WHAT DOES THE GEOMETRY KIT CONSIST OF? The geometry kit is preinstalled only in Foxy Carbon 29 XR and the frame sold separately, consisting of a steering cups set that include new bearings to adjust the fork angle in +/- 1°. The geometry kits vary depending on the size and they are determined by the head tube length. Therefore, each geometry kit is exclusive for each size.

WHICH LENGTH OF DROPPER POST CAN I USE FOR THE FOXY CARBON 29? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

164,5 mm 164,5 mm 164,5 mm 160 mm 160 mm 160 mm 160 mm 138 mm 138 mm 138 mm 138 mm 160 mm 160 mm 164,5 mm 164,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 178 mm 178 mm 178 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 200 mm 225 mm 225 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT



FOXY CARBON XR 29 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH CARBON AIR FORWARD GEOMETRY 29”

SPECIFICATIONS FRAME

Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminium CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Geometry kit included

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox DHX2 2Pos Lever Factory Kashima, 205x62.5 mm. Settings: Open/Firm, high and low-speed compression, high and low-speed rebound, spring preload. Super light steel (SLS) spring, Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression. Spring rate: S size 300 lbs, M size 350 lbs, L/XL size 400 lbs

FORK

Fox 36 29 Float FIT GRIP2 EVOL Factory Kashima, 160 mm, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: high and low-speed compression, high and low-speed rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Fox Transfer Factory Kashima internal, diameter 31.6 mm, S size: 365x100 mm, M size: 406x125 mm, L/XL size: 456x150 mm

SADDLE

SDG Fly MTN, PU foam, Cr-Mo rails, Cordura sides

FRONT BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjust

RIMS

DT Swiss EX1501 Spline One 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 606 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1187 mm 90 mm 450 mm 605 mm

420 mm 629 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1210 mm 100 mm 470 mm 614 mm

470 mm 654 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1236 mm 115 mm 490 mm 628 mm

510 mm 678 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1262 mm 130 mm 510 mm 642 mm

MODEL

COLOR

Foxy Carbon XR 29

Light Blue / Flame Red

S

M

L

XL

010.19073

010.19074

010.19075

010.19076

SPOKES

DT Competition, straight pull

FRONT HUB

DT 240, 15x110 mm, IS 6 bolts

REAR HUB

DT 240, 12x148 mm, 36T Ratchet system, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHF 29x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Minion DHR II 29x2.4 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

CRANKSET

Sram X01 carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger X01 Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram XG-1295, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

*Geometry kit included: steering cups: +/- 1°

WEIGHT W/O PEDALS

13.42 kg

49


FOXY CARBON RR 29 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH CARBON AIR FORWARD GEOMETRY 29”

SPECIFICATIONS FRAME

Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminium CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Factory Kashima, 205x62.5 mm. Settings: compression 3 positions lever, low-speed compression, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, extralight rebound, air volume spacer 0.6

FORK

Fox 36 29 Float FIT4 EVOL Factory Kashima, 160 mm, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, Cr-Mo rails, Cordura sides

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1700 Spline 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 606 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1187 mm 90 mm 450 mm 605 mm

420 mm 629 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1210 mm 100 mm 470 mm 614 mm

470 mm 654 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1236 mm 115 mm 490 mm 628 mm

510 mm 678 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1262 mm 130 mm 510 mm 642 mm

MODEL

COLOR

Foxy Carbon RR 29

Yellow / Orange

S

M

L

XL

010.19069

010.19070

010.19071

010.19072

SPOKES

DT Competition, straight pull

FRONT HUB

DT 350, 15x110 mm, IS 6 bolts

REAR HUB

DT 350, 12X148 mm, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHR II 29x2.4 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 29x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Sram X1 carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram XG-1275, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

*Optional Geometry kit: steering cups: +/- 1°

WEIGHT W/O PEDALS

13.56 kg

51


FOXY CARBON R 29 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH CARBON AIR FORWARD GEOMETRY 29”

SPECIFICATIONS FRAME

Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminium CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x62.5 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, extralight rebound, air volume spacer 0.6

FORK

Fox 36 29 Float FIT GRIP EVOL Performance, 160 mm, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, steel rail, Cordura sides

FRONT BRAKE

Sram Guide T, lightweight 4-piston dual-diameter caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed organic pads

REAR BRAKE

Sram Guide T, lightweight 4-piston dual-diameter caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed organic pads

BRAKE LEVERS

Sram Guide T, tooled reach adjust

RIMS

DT Swiss E1900 Spline 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 606 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1187 mm 90 mm 450 mm 605 mm

420 mm 629 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1210 mm 100 mm 470 mm 614 mm

470 mm 654 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1236 mm 115 mm 490 mm 628 mm

510 mm 678 mm -21 mm 350 mm 435 mm 70.5° 75.5° 66° 44 mm 1262 mm 130 mm 510 mm 642 mm

MODEL

COLOR

Foxy Carbon R 29

Black Phantom / Light Blue

S

M

L

XL

010.19065

010.19066

010.19067

010.19068

SPOKES

DT Champion, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 29x2.4 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 29x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

SRAM NX Eagle, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

*Optional Geometry kit: steering cups: +/- 1°

WEIGHT W/O PEDALS

13.94 kg

53


FOXY 29 FAQs All Mountain / Enduro WHAT SHOCKS ARE COMPATIBLE WITH FOXY 29?

CAN I CHANGE THE HEAD ANGLE?

Apart from the different shocks preassembled, it is also compatible with FOX Float X2, FOX DHX2 or RockShox Super Deluxe Air. Foxy 29 is installed with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10 mm bottom bushing is used.

There is a geometry kit available for Foxy 29 that consists of a set of steering cups that enable to push the head angle in 1°.

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN FOXY 29?

WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide:

Foxy 29 is compatible with forks up to 160 mm. IS THE KINEMATICS THE SAME AS IN FOXY CARBON 29? Foxy Carbon 29 and Foxy 29 have the same kinematics. WHAT MAXIMUM TYRE SIZE CAN BE INSTALLED IN FOXY 29? Foxy 29 is compatible with rear tyres up to 63 mm wide, which would match with 29x2.5” tires, but even so it is advisable to measure the tyre before installing it as the actual measure may vary depending on the manufacturer.

Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

WHAT MAXIMUM DISC SIZE CAN I INSTALL IN FOXY 29? It is compatible even with round discs with 34 teeth or 32 teeth if oval.

WHICH LENGTH OF DROPPER POST CAN I USE FOR THE FOXY 29? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

164,5 mm 164,5 mm 164,5 mm 160 mm 160 mm 160 mm 160 mm 138 mm 138 mm 138 mm 138 mm 160 mm 160 mm 164,5 mm 164,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 178 mm 178 mm 178 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 200 mm 225 mm 225 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT



FOXY XR 29 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 29”

SPECIFICATIONS FRAME

Foxy 29 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

RockShox Superdeluxe RCT, 205x62.5 mm. Settings: 2-position compression adjustment (Open/Pedal), low-speed compression, rebound, spring preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, medium rebound, lock out force 320,Spring rate: S size 300 lbs, M size 350 lbs, L size 400 lbs, XL size 450 lbs

FORK

RockShox Lyrik RC 29, Charger 2, Debon Air, 160 mm, tapered steerer tube, 15x110 mm axle, offset 42 mm. Settings: low-speed compression to firm, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Foxy XR 29 design

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1900 Spline 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 606 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1193 mm 90 mm 450 mm 606 mm

420 mm 629 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1222 mm 100 mm 475 mm 615 mm

470 mm 654 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1248 mm 115 mm 495 mm 630 mm

510 mm 678 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1274 mm 130 mm 515 mm 643 mm

MODEL

COLOR

Foxy XR 29

Black / Light Blue / Fuchsia

S

M

L

XL

010.19061

010.19062

010.19063

010.19064

SPOKES

DT Champion, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHF 29x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 29x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, steel, X-Sync 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

SRAM XG-1275, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

15.4 kg

57


FOXY 29 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 29”

SPECIFICATIONS FRAME

Foxy 29 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

RockShox Deluxe RL, 205x62.5 mm, DebonAir. Settings: rebound, 2-position compression adjustment (Openl/Lock), air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, medium rebound, lock out force 430, air volume reducers 2 Tokens

FORK

RockShox Yari RC Motion control 29, 160 mm, DebonAir, tapered steerer tube, 15x110 mm axle, offset 42 mm. Settings: low-speed compression to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Foxy 29 design

FRONT BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

MDK-EP1 29 TLR ASY, asymmetrical rim, 27 mm internal width, tubeless ready, 32 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 606 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1193 mm 90 mm 450 mm 606 mm

420 mm 629 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1222 mm 100 mm 475 mm 615 mm

470 mm 654 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1248 mm 115 mm 495 mm 630 mm

510 mm 678 mm -21 mm 350 mm 435 mm 71° 76° 66° 44 mm 1274 mm 130 mm 515 mm 643 mm

MODEL

COLOR

Foxy 29

Flame Red / Light Blue

S

M

L

XL

010.19057

010.19058

010.19059

010.19060

SPOKES

CN round stainless steel

FRONT HUB

MDK GW 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

MDK GW 12x148 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 29x2.4 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 29x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

SRAM NX Eagle, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.7 kg

59


FOXY CARBON 27’5 FAQs All Mountain / Enduro WHAT SHOCKS ARE COMPATIBLE WITH FOXY CARBON 27’5?

WHAT DOES THE GEOMETRY KIT CONSIST OF?

Apart from the different shocks preassembled, it is also compatible with FOX DHX2 Coil, Fox Float X2 and Super Deluxe Air. Foxy Carbon 27’5 is installed with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10mm bottom bushing is used.

The geometry kit is included in Foxy Carbon XR 27’5 and in Foxy Carbon XR 27’5 individual frames, and it includes:

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN FOXY CARBON 27’5? Foxy Carbon 27’5 is compatible with forks up to 160 mm. WHAT MAXIMUM TYRE SIZE CAN BEINSTALLED IN FOXY CARBON 27’5? Foxy Carbon 27’5 is compatible with rear tyres up to 66 mm wide, which would match with 27,5x2.6” tyres, but even so it is advisable to measure the tyre before installing it as the actual measure may vary depending on the manufacturer. WHAT MAXIMUM DISC SIZE CAN BE INSTALLED IN FOXY CARBON 27’5? It is compatible even with round discs with 34 teeth or 32 teeth if oval. IS IT COMPATIBLE WITH DI2? The new Foxy has not inner cable routing to host the DI2 shift cables, so if it is installed you have to be careful with the protection of the shift cable, especially below the bottom bracket cage.

1. Steering cups set which include new bearings to adjust the fork angle to +/-1°. 2. Set of rear derailleur hangers which enable to change the chainstay length to +/-10 mm. The geometry kits are different depending on the size and it is determined by the head tube. Therefore, each geometry kit is exclusive for each size. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

WHICH LENGTH OF DROPPER POST CAN I USE FOR THE FOXY CARBON 27’5? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

164,5 mm 164,5 mm 164,5 mm 160 mm 160 mm 160 mm 160 mm 138 mm 138 mm 138 mm 138 mm 160 mm 160 mm 164,5 mm 164,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 178 mm 178 mm 178 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 200 mm 225 mm 225 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT



FOXY CARBON XR 27’5 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Foxy 27´5 Stealth full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminium CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

RockShox Superdeluxe RC3, 205x62.5 mm, DebonAir. Settings: 3-position compression adjustment (Open/Pedal/Lock), rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, light rebound, pedal tune S, lockout force 380, air volume reducers 1 Token

FORK

RockShox Lyrik RC2 27´5, Charger 2, Debon Air, 160 mm, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: high and low-speed compression, rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, Cr-Mo rails, Cordura sides

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1700 Spline 27´5, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 618 mm -4 mm 350 mm 425 / 435 mm 70° 74,5° 65,5° 37 mm 1191 mm 110 mm 453 mm 586 mm

420 mm 640 mm -4 mm 350 mm 425 / 435 mm 70° 74,5° 65,5° 37 mm 1212 mm 120 mm 473 mm 595 mm

470 mm 665 mm -4 mm 350 mm 425 / 435 mm 70° 74,5° 65,5° 37 mm 1241 mm 140 mm 493 mm 614 mm

510 mm 688 mm -4 mm 350 mm 425 / 435 mm 70° 74,5° 65,5° 37 mm 1265 mm 150 mm 513 mm 623 mm

MODEL

COLOR

Foxy Carbon XR 27’5

Carbon / Fuchsia / Yellow

S

M

L

XL

010.19053

010.19054

010.19055

010.19056

SPOKES

DT Competition, straight

FRONT HUB

DT 350, 15x110 mm, IS 6 bolts

REAR HUB

DT 350, 12X148 mm, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 27´5x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant Eagle Carbon, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

SRAM XG-1275, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M071

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 435 mm. Steering cups: +/- 1°

WEIGHT W/O PEDALS

13.75 kg

63


FOXY CARBON R 27’5 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Foxy 27´5 Stealth full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminium CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

RockShox Deluxe RL, 205x62.5 mm, DebonAir. Settings: rebound, 2-position compression adjustment (Openl/Lock), air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, medium rebound, lock out force 430, air volume reducers 2 Tokens

FORK

RockShox Revelation RC Motion control 27´5, 150 mm, DebonAir, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: compression adjustment at lowspeed to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Fly MTN, PU foam, steel rail, Cordura sides

FRONT BRAKE

Shimano MT500, RT66 180 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT500, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT500, servo wave, alloy lever

RIMS

Mavic XA 27´5, 30 mm internal width, asymmetric, hookless, tubeless ready, 24 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 616 mm -8 mm 346 mm 425 / 435 mm 70,5° 75° 66° 37 mm 1184 mm 110 mm 460 mm 585 mm

420 mm 638 mm -8 mm 346 mm 425 / 435 mm 70,5° 75° 66° 37 mm 1198 mm 120 mm 480 mm 594 mm

470 mm 663 mm -8 mm 346 mm 425 / 435 mm 70,5° 75° 66° 37 mm 1236 mm 140 mm 500 mm 612 mm

510 mm 686 mm -8 mm 346 mm 425 / 435 mm 70,5° 75° 66° 37 mm 1260 mm 150 mm 520 mm 624 mm

MODEL

COLOR

Foxy Carbon R 27’5

Light Blue / Navy / Orange

S

M

L

XL

010.19049

010.19050

010.19051

010.19052

SPOKES

Mavic steel, straight-pull

FRONT HUB

Mavic 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

Mavic 12x148 mm, sealed bearings, ID360, IS 6 bolts

FRONT TIRE

Maxxis Minion DHR II 27´5x2.4 WT, Tubeless ready, Dual compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 27´5x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

SRAM NX Eagle, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M071

MISCELLANEOUS

*Optional Geometry kit: chainstay and brake adaptors for 435 mm. Steering cups: +/- 1°

WEIGHT W/O PEDALS

13.6 kg

65


FOXY 27’5 FAQs All Mountain / Enduro WHAT SHOCKS ARE COMPATIBLE WITH FOXY 27’5?

WHAT SIZE SHOULD I BUY?

Apart from the different shocks preassembled, it is also compatible with FOX Float X2, FOX DHX2 and RockShox Super Deluxe Coil. Foxy 27’5 is installed with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10 mm bottom bushing is used.

The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide:

WHAT MAXIMUM TYRE SIZE CAN BE INSTALLED IN FOXY 27’5? Foxy 27’5 is compatible with rear tyres up to 63 mm wide, which would match with 27’5x2.5” tyres, but even so it is advisable to measure the tyre before installing it as the actual measure may vary depending on the manufacturer.

Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

WHAT MAXIMUM DISC SIZE CAN BE INSTALLED IN FOXY 27’5? It is compatible even with round discs with 34 teeth or 32 teeth if oval. CAN I CHANGE THE HEAD ANGLE? There is a geometry kit available for Foxy 27’5 that consists of a set of steering cups that enable to push the head angle in 1°.

WHICH LENGTH OF DROPPER POST CAN I USE FOR THE FOXY 27’5? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

164,5 mm 164,5 mm 164,5 mm 160 mm 160 mm 160 mm 160 mm 138 mm 138 mm 138 mm 138 mm 160 mm 160 mm 164,5 mm 164,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 178 mm 178 mm 178 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 204,5 mm 204,5 mm 175 mm 200 mm 200 mm 200 mm 175 mm 200 mm 225 mm 225 mm 175 mm 200 mm 204,5 mm 204,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 225 mm 245 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT


67


FOXY XR 27’5 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Foxy 27´5 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x65 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, light rebound

FORK

Fox 36 27´5 Float FIT GRIP EVOL Performance, 160 mm, tapered steerer tube, 15x110 mm axle, offset 37 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Foxy XR design

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 180 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss E1900 Spline 27´5, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 602 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1179 mm 110 mm 455 mm 590 mm

420 mm 625 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1202 mm 120 mm 475 mm 599 mm

470 mm 649 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1231 mm 140 mm 495 mm 617 mm

510 mm 671 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1255 mm 150 mm 515 mm 626 mm

MODEL

COLOR

Foxy XR 27’5

Orange / Navy / Yellow

S

M

L

XL

010.19045

010.19046

010.19047

010.19048

SPOKES

DT Champion, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, Exo protection, 60TPI, folding bead

REAR TIRE

Maxxis Aggresor 27´5x2.3, Tubeless ready, dual compound, Exo protection, 60TPI, folding bead

CRANKSET

Truvativ Descendant 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

32T, steel, X-Sync 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.8 kg

69


FOXY 27’5 All Mountain / Enduro

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5”

SPECIFICATIONS FRAME

Foxy 27´5 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150 mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetain design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

RockShox Deluxe RL, 205x65 mm, DebonAir. Settings: rebound, 2-position compression adjustment (Openl/Lock), air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Medium compression, medium rebound, lock out force 430, air volume reducers 2 Tokens

FORK

Rockshox Recon RL 27´5, 150 mm, Solo Air, tapered steerer tube, 15x110 mm Boost axle, 32 mm alloy stanchions, offset 42 mm. Settings: compression adjustment at low-speed to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size: 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Foxy design

FRONT BRAKE

Shimano MT501, RT56 180 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT56 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

MDK-EP1 27´5 TLR ASY, asymmetrical rim, 27 mm internal width, tubeless ready, 32 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 602 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1179 mm 110 mm 455 mm 590 mm

420 mm 625 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1202 mm 120 mm 475 mm 599 mm

470 mm 649 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1231 mm 140 mm 495 mm 617 mm

510 mm 671 mm -9 mm 345 mm 425 mm 70.5° 76° 66° 37 mm 1255 mm 150 mm 515 mm 626 mm

MODEL

COLOR

Foxy 27’5

Black / Light Blue / Flame Red

S

M

L

XL

010.19041

010.19042

010.19043

010.19044

SPOKES

CN round stainless steel

FRONT HUB

MDK GW 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

MDK GW 12x148 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Ardent 27´5x2.40, single compound, 60 TPI, Wire bead

REAR TIRE

Maxxis Ardent 27´5x2.40, single compound, 60 TPI, Wire bead

CRANKSET

SRAM NX, 11s, Boost, Power Spline axle, Direct Mount chain ring, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

30T, steel, X-SYNC

BOTTOM BRACKET

SRAM Power Spline, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS7, 11-42T, 11s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.5 kg

71



X

C

R

A

C

E


PODIUM CARBON FAQs XC Race

WHICH IS THE BIGGEST CHAINRING I CAN USE IN PODIUM CARBON?

HOW MANY PODIUM STEM LENGTHS ARE THERE?

Podium Carbon is designed for 2X or 1X. For 1X the maximum chainring you can use is 36T.

There are available the following stem lengths: 75 mm, 90 mm, 105 mm, 115 mm.

WHICH REAR HUB SPACING IS COMPATIBLE WITH PODIUM CARBON?

IS IT POSSIBLE TO ADJUST THE PODIUM CARBON STEM HEIGHT?

Podium Carbon features a Boost 148 mm rear hub, so it’s not compatible with any other rear hub size, not even using additional spacers, as the flange for the rotor position is different.

Podium Carbon stem itself acts as the top headset cap. You could use spacers to rise the stem height, but you would have to use the top bearing cap too. It is important to note that if you are already using a fork with a cut down steerer tube, it will not be possible to rise the stem, as there will not be enough space for the stem to be properly clamped to the fork’s steer tube.

CAN I USE A DROPPER POST IN PODIUM CARBON? Yes you can. In fact, the frame is ready for the internal routing of a Stealthtype dropper post. WHICH IS THE MAXIMUM TIRE SIZE I CAN USE IN PODIUM CARBON? With an internal width rim size up to 25 mm –currently Podium Carbon models are specified with 22 or 23 mm internal width rims– maximum tire size you can use is 29x2.4”which guarantees enough clearance to shed the mud easily. WHICH REAR DISC BRAKE CAN I USE WITH FLAT-MOUNT SYSTEM? Currently you have the SRAM Level TLM model with Flat Mount direct caliper. However, you can use any other brake caliper using a rear brake Flat Mount adaptor to Direct Mount. CAN I USE A STANDARD STEM IN PODIUM CARBON? There is no mechanical obstacle on using standard stems, but Mondraker will not be held responsible if the frame is damaged in the case of a crash, as IST-EVO is exclusively designed for the Podium Carbon stem.


WHICH FORK TRAVEL CAN I USE IN PODIUM CARBON?

WHICH SIZE SHOULD I BUY?

You can use up to 120 mm forks, so head angle will be 1° slacker and bottom bracket height will rise around 5 mm.

Sizing is different from one user to another. Personal likings are very different and the type of use of the bike is also very important for this decision. This is a general chart that could be used as a sizing guide:

IS IT POSSIBLE TO USE NON-BOOST TYPE CRANKSET IN PODIUM CARBON? There are some cases where you can use non-Boost type cranks, for instance, some Race Face models have a chainline in between the standard 142 mm and Boost 148 mm rear hub spacing, so they will be perfectly compatible with the Podium. It’s important to notice the chairing size. The bigger the size, the wider the chainline needed.

Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95

75


PODIUM CARBON RR XC Race

TECHNOLOGIES STEALTH CARBON AIR IST EVO FLAT STAYS 29”

SPECIFICATIONS FRAME

Podium 29 Stealth Air Carbon, Integrated Stem Technology (IST EVO), XC Forward Geometry, PF30 bottom bracket, tapered head tube, HHG internal cable routing, Boost 12x148 mm rear axel, Flatmount brake compatible, steel chain protector

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Fox 32 29 Float FIT4 EVOL Step Cast Factory Kashima, 100 mm, tapered steerer tube,15x110 mm Boost axle, remote lockout, offset 44 mm. Settings: lockout, compression micro-adjustment at low-speed, rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Stealth Carbon Integrated, 31.8 mm barbore, length: sizes S/M: 75 mm, size L: 90 mm, size XL: 105 mm

HANDLEBAR

Onoff Peak Carbon 0.2, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Peak Carbon 0-R VFLEX, diameter 27.2 mm, length 400 mm

SADDLE

Fizik Antares R5 K:IUM

FRONT BRAKE

Sram Level TLM, monoblock caliper, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

REAR BRAKE

Sram Level TLM, monoblock caliper, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

BRAKE LEVERS

Sram Level TLM, tooled reach adjust, lever pivot bushings

RIMS

Mavic Crossmax Pro 29, 22 mm internal width, asymmetric, tubeless ready, ISM 4D, 24 spokes

SPOKES

Mavic Zicral


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1086 mm 85 mm 402 mm 637 mm

430 mm 610 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1106 mm 90 mm 420 mm 642 mm

470 mm 630 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1127 mm 100 mm 437 mm 651 mm

520 mm 650 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1147 mm 115 mm 452 mm 666 mm

MODEL

COLOR

Podium Carbon RR

Carbon / Light Blue / Flame Red

S

M

L

XL

010.19022

010.19023

010.19024

010.19025

FRONT HUB

Mavic 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

Mavic 12x148 mm, sealed bearings, ID360, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

REAR TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

CRANKSET

Sram XX1 carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB PF30, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

SRAM XX1 Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger X01 Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram XG-1295, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

8.5 kg

77


PODIUM CARBON R XC Race

TECHNOLOGIES STEALTH CARBON AIR IST EVO FLAT STAYS 29”

SPECIFICATIONS FRAME

Podium 29 Stealth Air Carbon, Integrated Stem Technology (IST EVO), XC Forward Geometry, PF30 bottom bracket, tapered head tube, HHG internal cable routing, Boost 12x148 mm rear axel, Flatmount brake compatible, steel chain protector

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Fox 32 29 Float GRIP EVOL Step Cast Performance, 100 mm, tapered steerer tube,15x110 mm axle, remote lockout, offset 44 mm. Settings: lockout, rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Stealth Carbon Integrated, 31.8 mm barbore, length: sizes S/M: 75 mm, size L: 90 mm, size XL: 105 mm

HANDLEBAR

Onoff Peak Carbon 0.2, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Peak Carbon 0-R VFLEX, diameter 27.2 mm, length 400 mm

SADDLE

Fizik Antares R7

FRONT BRAKE

Sram Level TLM, monoblock caliper, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

REAR BRAKE

Sram Level TLM, monoblock caliper, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

BRAKE LEVERS

Sram Level TLM, tooled reach adjust, lever pivot bushings

RIMS

Mavic Crossmax Elite 29, 22 mm internal width, asymmetric, tubeless ready, ISM 4D, 24 spokes

SPOKES

Mavic Steel double butted bladed


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1086 mm 85 mm 402 mm 637 mm

430 mm 610 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1106 mm 90 mm 420 mm 642 mm

470 mm 630 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1127 mm 100 mm 437 mm 651 mm

520 mm 650 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1147 mm 115 mm 452 mm 666 mm

MODEL

COLOR

Podium Carbon R

Black Phantom / Yellow

S

M

L

XL

010.19018

010.19019

010.19020

010.19021

FRONT HUB

Mavic 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

Mavic 12x148 mm, sealed bearings, ID360, IS 6 bolts, XD freehub

FRONT TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

REAR TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

CRANKSET

Truvativ Stylo Carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB PF30, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger GX Eagle, 12s, X-Actuation 1:1

CASSETTE

SRAM XG-1275, 10-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

9 kg

79


PODIUM CARBON XC Race

TECHNOLOGIES STEALTH CARBON AIR IST EVO FLAT STAYS 29”

SPECIFICATIONS FRAME

Podium 29 Stealth Air Carbon, Integrated Stem Technology (IST EVO), XC Forward Geometry, PF30 bottom bracket, tapered head tube, HHG internal cable routing, Boost 12x148 mm rear axel, Flatmount brake compatible, steel chain protector

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox SID RL 29, 100 mm, DebonAir, tapered steerer tube, 15x110 mm axel, 32 mm alloy stanchions, offset 51 mm. Settings: 2 position remote compression (open/lock), rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Stealth Carbon Integrated, 31.8 mm barbore, length: sizes S/M: 75 mm, size L: 90 mm, size XL: 105 mm

HANDLEBAR

Onoff Notion 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Peak 0-R, 7075 Alloy, diameter 27.2 mm, length 400 mm

SADDLE

Mondraker Podium design

FRONT BRAKE

Sram Level T, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

REAR BRAKE

Sram Level T, Centerline 160 mm IS 6 bolts one-piece rotor, steel-backed organic pad

BRAKE LEVERS

Sram Level T, tooled reach adjust

RIMS

Mavic Crossmax 29, 25 mm internal width, asymmetric, tubeless ready, 24 spokes

SPOKES

Mavic Steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1086 mm 85 mm 402 mm 637 mm

430 mm 610 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1106 mm 90 mm 420 mm 642 mm

470 mm 630 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1127 mm 100 mm 437 mm 651 mm

520 mm 650 mm -65 mm 300 mm 432 mm 72° 73.5° 70° 46 mm 1147 mm 115 mm 452 mm 666 mm

MODEL

COLOR

Podium Carbon

Carbon / Flame Red

S

M

L

XL

010.19014

010.19015

010.19016

010.19017

FRONT HUB

Mavic 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

Mavic 12x148 mm, sealed bearings, ID360, IS 6 bolts

FRONT TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

REAR TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

CRANKSET

Truvativ Stylo 7K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

10.15 kg

81



X

C

P

R

O


CHRONO CARBON R XC Pro

TECHNOLOGIES STEALTH SIDE CARBON STRUCTURE FLAT STAYS 29”

SPECIFICATIONS FRAME

Chrono 29 Stealth full Carbon, XC Forward Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable routing, Boost 12x148 mm rear axel, Comfort Flat chainstays (Flatstays) design

SIZES

S: 395 mm / M: 43 0 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox SID RL 29, 100 mm, DebonAir, tapered steerer tube, 15x110 mm axel, 32 mm alloy stanchions, offset 51 mm. Settings: 2 position remote compression (open/lock), rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Mondraker, 6061 T6 Alloy, 31.8 mm barbore, rise: -5°, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm

HANDLEBAR

Onoff Notion 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 m m, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

Mondraker Chrono Carbon R design

FRONT BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

Mavic Crossmax 29, 25 mm internal width, asymmetric, tubeless ready, 24 spokes

SPOKES

Mavic Steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1081 mm 85 mm 411 mm 605 mm

430 mm 610 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1101 mm 90 mm 430 mm 610 mm

470 mm 630 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1122 mm 100 mm 447 mm 619 mm

520 mm 650 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1143 mm 115 mm 463 mm 632 mm

MODEL

COLOR

Chrono Carbon R

Carbon / Light Blue / Flame Red

S

M

L

XL

010.19005

010.19006

010.19007

010.19008

FRONT HUB

Mavic 15x110 mm, sealed bearings, IS 6 bolts

REAR HUB

Mavic 12x148 mm, sealed bearings, ID360, IS 6 bolts

FRONT TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

REAR TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

CRANKSET

Truvativ Stylo 7K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

34T, CNC-machined alloy, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

10.4 kg

85


CHRONO CARBON XC Pro

TECHNOLOGIES STEALTH SIDE CARBON STRUCTURE FLAT STAYS 29”

SPECIFICATIONS FRAME

Chrono 29 Stealth full Carbon, XC Forward Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable routing, Boost 12x148 mm rear axel, Comfort Flat chainstays (Flatstays) design

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Fox 32 29 Float GRIP EVOL Rhythm, 100 mm, tapered steerer tube,15x110 mm axle, remote lockout, offset 44 mm. Settings: lockout, rebound, air preload

HEADSET

Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Mondraker, 6061 T6 Alloy, 31.8 mm barbore, rise: -5°, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm

HANDLEBAR

Onoff Notion 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

Mondraker Chrono Carbon design

FRONT BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

MDK-XP1 29 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1081 mm 85 mm 411 mm 605 mm

430 mm 610 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1101 mm 90 mm 430 mm 610 mm

470 mm 630 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1122 mm 100 mm 447 mm 619 mm

520 mm 650 mm -65 mm 305 mm 430 mm 72° 73.5° 70° 46 mm 1143 mm 115 mm 463 mm 632 mm

MODEL

COLOR

Chrono Carbon

Black Phantom / White

S

M

L

XL

010.19001

010.19002

010.19003

010.19004

FRONT HUB

MDK DC511 15x110 mm, cup & cone ball bearings, IS 6 bolts

REAR HUB

MDK GW 12x148 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

REAR TIRE

Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead

CRANKSET

Truvativ Stylo 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

34T, steel, X-SYNC 2

BOTTOM BRACKET

Sram DUB BSA, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

10.7 kg

87


CHRONO RR XC Pro

TECHNOLOGIES AVANT GEOMETRY XTRALITE SUPER LIGHT TUBING FLAT STAYS 29”

SPECIFICATIONS FRAME

Chrono 29 6061 Xtralite Alloy butted, Avant Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable Routing, Boost 12x148 mm rear axle

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Fox 32 29 Float GRIP EVOL Rhythm, 100 mm, tapered steerer tube,15x110 mm axle, remote lockout, offset 44 mm. Settings: lockout, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-6°, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm

HANDLEBAR

MDK 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Wave, 130 mm

SEATPOST

MDK 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2 mm, length 400 mm

SADDLE

Mondraker Chrono RR design

FRONT BRAKE

Shimano M-365, RT54 160 mm Center Lock rotor, resin pads

REAR BRAKE

Shimano M-365, RT54 160 mm Center Lock rotor, resin pads

BRAKE LEVERS

Shimano M-365, tooled reach adjust

RIMS

MDK-XP1 29 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK GW 15x110 mm, sealed bearings, Center Lock


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 m m 1087 mm 100 mm 406 mm 618 mm

430 mm 610 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1107 mm 100 mm 426 mm 618 mm

470 mm 630 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1127 mm 110 mm 444 mm 628 mm

520 mm 650 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1148 mm 125 mm 460 mm 642 mm

MODEL

COLOR

Chrono RR

Orange / Navy / Yellow

S

M

L

XL

010.19123

010.19124

010.19125

010.19126

REAR HUB

MDK GW 12x148 mm, sealed bearings, Center Lock

FRONT TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

REAR TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

CRANKSET

Truvativ Stylo 6K Eagle, 12s, Boost, PS axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

32T, alloy, X-SYNC 2

BOTTOM BRACKET

Sram Power Spline, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

12.2 kg

89


CHRONO R XC Pro

TECHNOLOGIES AVANT GEOMETRY XTRALITE SUPER LIGHT TUBING FLAT STAYS 29”

SPECIFICATIONS FRAME

Chrono 29 6061 Xtralite Alloy butted, Avant Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable Routing, Boost 12x148 mm rear axle

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox Judy Silver 29, 100 mm, Solo Air, tapered steerer tube, 15x110 mm axel, 30 mm steel stanchions, offset 51 mm. Settings: 2 pos remote compression (open/lock), rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-6°, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm

HANDLEBAR

MDK 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Wave, 130 mm

SEATPOST

MDK 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2 mm, length 400 mm

SADDLE

Mondraker Chrono R design

FRONT BRAKE

Shimano M-365, RT54 160 mm Center Lock rotor, resin pads

REAR BRAKE

Shimano M-365, RT54 160 mm Center Lock rotor, resin pads

BRAKE LEVERS

Shimano M-365, tooled reach adjust

RIMS

MDK-XP1 29 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 m m 1087 mm 100 mm 406 mm 618 mm

430 mm 610 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1107 mm 100 mm 426 mm 618 mm

470 mm 630 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1127 mm 110 mm 444 mm 628 mm

520 mm 650 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1148 mm 125 mm 460 mm 642 mm

MODEL

COLOR

Chrono R

Light Blue / Navy / Orange

S

M

L

XL

010.19119

010.19120

010.19121

010.19122

FRONT HUB

MDK GW 15x110 mm, sealed bearings, Center Lock

REAR HUB

MDK GW 12x148 mm, sealed bearings, Center Lock

FRONT TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

REAR TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

CRANKSET

Truvativ Stylo 6K Eagle, 12s, Boost, PS axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

32T, alloy, X-SYNC 2

BOTTOM BRACKET

Sram Power Spline, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

12.6 kg

91


CHRONO XC Pro

TECHNOLOGIES AVANT GEOMETRY XTRALITE SUPER LIGHT TUBING FLAT STAYS 29”

SPECIFICATIONS FRAME

Chrono 29 6061 Xtralite Alloy butted, Avant Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable Routing, Boost 12x148 mm rear axle

SIZES

S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox 30 Silver 29, 100 mm, Solo Air, tapered steerer tube, 9x135 mm axel, 30 mm steel stanchions, offset 51 mm. Settings: 2 pos remote compression (open/ lock), rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-6°, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm

HANDLEBAR

MDK 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Wave, 130 mm

SEATPOST

MDK 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2 mm, length 400 mm

SADDLE

Mondraker Chrono design

FRONT BRAKE

Shimano MT201, RT56 160 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT201, RT56 160 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT201, tooled reach adjust

RIMS

MDK-XP1 29 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

395 mm 590 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 m m 1087 mm 100 mm 406 mm 618 mm

430 mm 610 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1107 mm 100 mm 426 mm 618 mm

470 mm 630 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1127 mm 110 mm 444 mm 628 mm

520 mm 650 mm -65 mm 305 mm 435 mm 72.5° 73.5° 70° 46 mm 1148 mm 125 mm 460 mm 642 mm

MODEL

COLOR

Chrono

Black / Flame Red / Light Blue

S

M

L

XL

010.19115

010.19116

010.19117

010.19118

FRONT HUB

MDK DC20LW 9x135 mm, cup & cone ball bearings, IS 6 bolts

REAR HUB

MDK GW 12x148 mm, sealed bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

REAR TIRE

Kenda Slant Six 29x2.35, DTC, 60TPI, Wire bead

CRANKSET

Sram NX, 11s, Boost, 24 mm axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm

CHAINRINGS

32T, steel, X-Sync

BOTTOM BRACKET

Sram GXP XR, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M068

MISCELLANEOUS

/

WEIGHT W/O PEDALS

12.5 kg

93



X

C

S

P

O

R

T


PHASE S 29 XC Sport

TECHNOLOGIES AVANT GEOMETRY CUSTOLITE CUSTOMIZED TUBING 29”

SPECIFICATIONS FRAME

Phase 29 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

S: 400 mm / M: 440 mm / L: 480 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour XCM ATB RL 29 100 mm, 30 mm steel stanchions, 1-1/8” steerer tube, 9 mm QR axle. Settings: spring preload, remote lockout

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 31.8 mm barbore, rise: +/-7°, length: sizes S/M: 60 mm, size L: 75 mm, size XL: 90 mm

HANDLEBAR

MDK XC 0.2, 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 130 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 350 mm, offset 15 mm

SADDLE

Mondraker Phase S 29 design

FRONT BRAKE

Tektro HDM285 hydraulic, 160 mm IS 6 bolts rotor

REAR BRAKE

Tektro HDM285 hydraulic, 160 mm IS 6 bolts rotor

BRAKE LEVERS

Tektro HDM285 hydraulic

RIMS

MDK-XS1 29, 24 mm external width, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK DC20, 9x100 mm QR axle, cup & cone ball bearings, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1087 mm 100 mm 392 mm 616 mm

440 mm 600 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1112 mm 100 mm 417 mm 616 mm

480 mm 620 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1133 mm 110 mm 434 mm 625 mm

520 mm 640 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1154 mm 125 mm 450 mm 639 mm

MODEL

COLOR

Phase S 29

Yellow / Black / Orange

REAR HUB

MDK DC22, 9x135 mm QR axle, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 29x2.35 single compound, 30TPI, wire bead

REAR TIRE

Kenda Slant Six 29x2.35 single compound, 30TPI, wire bead

CRANKSET

Suntour XCM AX D 2X10s, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

36T alloy / 22T steel

BOTTOM BRACKET

Suntour BSA

PEDALS

Wellgo LU-895DU

CHAIN

KMC X10, 10s

FRONT DERAILLEUR

Shimano Deore M6000, high clamp, side swing, front pull

REAR DERAILLEUR

Shimano Deore M6000, Shadow+, SGS, 10s

SHIFTERS

Shimano Deore M6000, 2x10s

CASSETTE

SunRace CSMS1, 11-36T, 10s

DERAILLEUR HANGER

Mondraker M072

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.6 kg

S

M

L

XL

010.19309

010.19310

010.19311

010.19312

97


PHASE 29 XC Sport

TECHNOLOGIES AVANT GEOMETRY CUSTOLITE CUSTOMIZED TUBING 29”

SPECIFICATIONS FRAME

Phase 29 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

S: 400 mm / M: 440 mm / L: 480 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour XCT ATB RL 29 100 mm, 28 mm steel stanchions, 1-1/8” steerer tube, 9 mm QR axle. Settings: spring preload, lockout

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 31.8 mm barbore, rise: +/-7°, length: sizes S/M: 60 mm, size L: 75 mm, size XL: 90 mm

HANDLEBAR

MDK XC 0.2, 6061 alloy, rise: 4.8 mm, width: 720 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 130 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 350 mm, offset 15 mm

SADDLE

Mondraker Phase 29 design

FRONT BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

REAR BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

BRAKE LEVERS

Tektro HDM275 hydraulic

RIMS

MDK-XS1 29, 24 mm external width, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK DC20, 9x100 mm QR axle, cup & cone ball bearings, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

400 mm 575 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1087 mm 100 mm 392 mm 616 mm

440 mm 600 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1112 mm 100 mm 417 mm 616 mm

480 mm 620 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1133 mm 110 mm 434 mm 625 mm

520 mm 640 mm -65 mm 300 mm 445 mm 72° 73.5° 69.5° 46 mm 1154 mm 125 mm 450 mm 639 mm

MODEL

COLOR

Phase 29

Black / Light Blue / Yellow

REAR HUB

MDK DC22, 9x135 mm QR axle, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 29x2.35 single compound, 30TPI, wire bead

REAR TIRE

Kenda Slant Six 29x2.35 single compound, 30TPI, wire bead

CRANKSET

Shimano MT100, 3x9s, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

40/30/22T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-895DU

CHAIN

KMC Z99, 9s

FRONT DERAILLEUR

Shimano Altus M2000, down swing, down pull

REAR DERAILLEUR

Shimano Acera M3000, Shadow, SGS, 9s

SHIFTERS

Shimano Altus M2000, 3x9s

CASSETTE

SunRace CSMS90, 11-34T, 9s

DERAILLEUR HANGER

Mondraker M072

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.7 kg

S

M

L

XL

010.19305

010.19306

010.19307

010.19308

99


PHASE 27’5 XC Sport

TECHNOLOGIES AVANT GEOMETRY CUSTOLITE CUSTOMIZED TUBING 27’5”

SPECIFICATIONS FRAME

Phase 27´5 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

S: 380 mm / M: 430 mm / L: 480 mm / XL: 530 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour XCT ATB RL 27´5 100 mm, 28 mm steel stanchions, 1-1/8” steerer tube, 9 mm QR axle. Settings: spring preload, lockout

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 31.8 mm barbore, rise: +/-7°, length: sizes S/M: 60 mm, size L: 75 mm, size XL: 90 mm

HANDLEBAR

MDK XC 0.5, 6061 alloy, rise: 15 mm, width: 720 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 130 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 350 mm, offset 15 mm

SADDLE

Mondraker Phase 27´5 design

FRONT BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

REAR BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

BRAKE LEVERS

Tektro HDM275 hydraulic

RIMS

MDK-XS1 27´5, 24 mm external width, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK DC20, 9x100 mm QR axle, cup & cone ball bearings, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 575 mm -50 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1085 mm 100 mm 407 mm 583 mm

430 mm 600 mm -50 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1110 mm 100 mm 432 mm 583 mm

480 mm 620 mm -50 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1131 mm 110 mm 450 mm 592 mm

530 mm 640 mm -50 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1153 mm 130 mm 464 mm 611 mm

MODEL

COLOR

Phase 27’5

Flame Red / Light Blue

REAR HUB

MDK DC22, 9x135 mm QR axle, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

REAR TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

CRANKSET

Shimano MT100, 3x9s, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

40/30/22T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-895DU

CHAIN

KMC Z99, 9s

FRONT DERAILLEUR

Shimano Altus M2000, down swing, down pull

REAR DERAILLEUR

Shimano Acera M3000, Shadow, SGS, 9s

SHIFTERS

Shimano Altus M2000, 3x9s

CASSETTE

SunRace CSMS90, 11-34T, 9s

DERAILLEUR HANGER

Mondraker M072

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.3 kg

S

M

L

XL

010.19301

010.19302

010.19303

010.19304

101


NEVA S XC Sport

TECHNOLOGIES AVANT GEOMETRY CUSTOLITE CUSTOMIZED TUBING 27’5”

SPECIFICATIONS FRAME

Neva 27´5 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

S: 330 mm / M: 380 mm / L: 430 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour XCM ATB RL 27´5 100 mm, 30 mm steel stanchions, 1-1/8” steerer tube, 9 mm QR axle. Settings: spring preload, remote lockout

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 31.8 mm barbore, rise: +/-7°, length: sizes S/M: 60 mm, size L: 75 mm

HANDLEBAR

MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 660 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Ergo

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 350 mm, offset 15 mm

SADDLE

Mondraker Neva S design

FRONT BRAKE

Tektro HDM286 hydraulic, 160 mm IS 6 bolts rotor

REAR BRAKE

Tektro HDM286 hydraulic, 160 mm IS 6 bolts rotor

BRAKE LEVERS

Tektro HDM286 hydraulic

RIMS

MDK-XS1 27´5, 24 mm external width, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK DC20, 9x100 mm QR axle, cup & cone ball bearings, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

330 mm 535 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1042 mm 100 mm 366 mm 588 mm

380 mm 555 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1064 mm 120 mm 380 mm 607 mm

430 mm 580 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1090 mm 130 mm 403 mm 616 mm

480 mm 600 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1112 mm 140 mm 420 mm 626 mm

MODEL

COLOR

Neva S

Black / Gum / Yellow

REAR HUB

MDK DC22, 9x135 mm QR axle, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

REAR TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

CRANKSET

Suntour XCM AX D 2X10s, S/M size: 170 mm, L size: 175 mm

CHAINRINGS

36T alloy / 22T steel

BOTTOM BRACKET

Suntour BSA

PEDALS

Wellgo LU-895DU

CHAIN

KMC X10, 10s

FRONT DERAILLEUR

Shimano Deore M6000, high clamp, side swing, front pull

REAR DERAILLEUR

Shimano Deore M6000, Shadow+, SGS, 10s

SHIFTERS

Shimano Deore M6000, 2x10s

CASSETTE

SunRace CSMS1, 11-36T, 10s

DERAILLEUR HANGER

Mondraker M072

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.3 kg

S

M

L

010.19316

010.19317

010.19318

103


NEVA XC Sport

TECHNOLOGIES AVANT GEOMETRY CUSTOLITE CUSTOMIZED TUBING 27’5”

SPECIFICATIONS FRAME

Neva 27´5 6061 Custolite Alloy triple butted, Avant Geometry, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

S: 330 mm / M: 380 mm / L: 430 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour XCT ATB RL 27´5 100 mm, 28 mm steel stanchions, 1-1/8” steerer tube, 9 mm QR axle. Settings: spring preload, lockout

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 31.8 mm barbore, rise: +/-7°, length: sizes S/M: 60 mm, size L: 75 mm

HANDLEBAR

MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 660 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Ergo

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 350 mm, offset 15 mm

SADDLE

Mondraker Neva design

FRONT BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

REAR BRAKE

Tektro HDM275 hydraulic, 160 mm IS 6 bolts rotor

BRAKE LEVERS

Tektro HDM275 hydraulic

RIMS

MDK-XS1 27´5, 24 mm external width, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

MDK DC20, 9x100 mm QR axle, cup & cone ball bearings, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

330 mm 535 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1042 mm 100 mm 366 mm 588 mm

380 mm 555 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1064 mm 120 mm 380 mm 607 mm

430 mm 580 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1090 mm 130 mm 403 mm 616 mm

480 mm 600 mm -55 mm 300 mm 425 mm 74° 74° 68.5° 42 mm 1112 mm 140 mm 420 mm 626 mm

MODEL

COLOR

Neva

Light Blue / Navy

REAR HUB

MDK DC22, 9x135 mm QR axle, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

REAR TIRE

Kenda Slant Six 27´5x2.35 single compound, 30TPI, wire bead

CRANKSET

Shimano MT100, 3x9s, S/M size: 170 mm, L/XL size: 175 mm

CHAINRINGS

40/30/22T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-895DU

CHAIN

KMC Z99, 9s

FRONT DERAILLEUR

Shimano Altus M2000, down swing, down pull

REAR DERAILLEUR

Shimano Acera M3000, Shadow, SGS, 9s

SHIFTERS

Shimano Altus M2000, 3x9s

CASSETTE

SunRace CSMS90, 11-34T, 9s

DERAILLEUR HANGER

Mondraker M072

MISCELLANEOUS

/

WEIGHT W/O PEDALS

14.4 kg

S

M

L

010.19313

010.19314

010.19315

105



K

I

D

S


FACTOR 26 Kids

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE 2.0 FORWARD GEOMETRY 26”

SPECIFICATIONS FRAME

Factor 26 6066 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, Tapered head tube, BSA bottom bracket, QR 9 mm rear axle, 1x drivetrain compatible, travel 90 mm. 24” wheelset compatible

SIZES

One size 350 mm

REAR SHOCK

RockShox Monarch R, 152x31 mm, Solo Air. Settings: rebound, air preload. 22.2x8 mm bushings

REAR SHOCK SETTING

Light compression, Light rebound L3, standard body

FORK

RockShox 30 Gold 26, 100 mm, Solo Air, 1-1/8” head tube, 9x135 mm axel, 30 mm alloy stanchions, offset 40 mm. Settings: compression adjustment at low-speed to lock, rebound, air preload

HEADSET

Onoff Saturn for 1-1/8” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Onoff Notion 0.5, double butted 6061 alloy, rise: 12 mm, width: 710 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

SDG Fly JR

FRONT BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

MDK-XP1 26 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel


A B C D E F G H I J K L M

Size

26

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

350 mm 570 mm -10 mm 320 mm 420 mm 73° 74° 69° 39 mm 1075 mm 112 mm 414 mm 542 mm

MODEL

COLOR

Factor 26

Flame Red / Black

FRONT HUB

MDK DC20LW 9x135 mm, cup & cone ball bearings, IS 6 bolts

REAR HUB

MDK DC22LW 9x135 mm, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Small Block Eight 26x2.35, DTC, 30TPI, Wire bead

REAR TIRE

Kenda Small Block Eight 26x2.35, DTC, 30TPI, Wire bead

CRANKSET

Sram NX, 11s, 24 mm axle, Direct Mount chain ring, 155 mm

CHAINRINGS

28T, steel, X-Sync

BOTTOM BRACKET

Sram GXP XR, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS7, 11-42T, 11s

DERAILLEUR HANGER

Mondraker M048

MISCELLANEOUS

/

WEIGHT W/O PEDALS

13.1 kg

26 010.19132

109


FACTOR 24 Kids

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE 2.0 FORWARD GEOMETRY 24”

SPECIFICATIONS FRAME

Factor 24 6066 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, Tapered head tube, BSA bottom bracket, QR 9 mm rear axle, 1x drivetrain compatible, travel 90 mm. 26” wheelset compatible

SIZES

One size 300 mm

REAR SHOCK

RockShox Monarch R, 152x31 mm, Solo Air. Settings: rebound, air preload. 22.2x8 mm bushings

REAR SHOCK SETTING

Light compression, Light rebound L3, standard body

FORK

RockShox 30 Gold 26, 80 mm, Solo Air, 1-1/8” head tube, 9x135 mm axel, 30 mm alloy stanchions, offset 40 mm. Settings: compression adjustment at low-speed to lock, rebound, air preload

HEADSET

Onoff Saturn for 1-1/8” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Onoff Notion 0.5, double butted 6061 alloy, rise: 12 mm, width: 680 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

SDG Fly JR

FRONT BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT56 160 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

MDK-XP1 24 TLR, 23 mm internal width, tubeless ready, 32 spokes

SPOKES

CN round stainless steel


A B C D E F G H I J K L M

Size

24

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

300 mm 525 mm -10 mm 295 mm 420 mm 73° 74° 69° 39 mm 1028 mm 112 mm 374 mm 515 mm

MODEL

COLOR

Factor 24

Navy / Light Blue

FRONT HUB

MDK DC20LW 9x135 mm, cup & cone ball bearings, IS 6 bolts

REAR HUB

MDK DC22LW 9x135 mm, cup & cone ball bearings, IS 6 bolts

FRONT TIRE

Kenda Small Block Eight 24x2.10, DTC, 30TPI, Wire bead

REAR TIRE

Kenda Small Block Eight 24x2.10, DTC, 30TPI, Wire bead

CRANKSET

Sram NX, 11s, 24 mm axle, Direct Mount chain ring, 155 mm

CHAINRINGS

28T, steel, X-Sync

BOTTOM BRACKET

Sram GXP XR, sealed bearings, 73 mm

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS7, 11-42T, 11s

DERAILLEUR HANGER

Mondraker M048

MISCELLANEOUS

/

WEIGHT W/O PEDALS

11.5 kg

24 010.19131

111


LEADER 24 Kids

TECHNOLOGIES CUSTOLITE CUSTOMIZED TUBING 24”

SPECIFICATIONS FRAME

Leader 24 7005 Custolite alloy, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

One size 320 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Suntour M3010 50 mm, 25 mm stanchions, soft spring. Settings: spring preload

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 25.4 mm barbore, rise: +/-7°, length: 60 mm

HANDLEBAR

MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 620 mm, 9° backsweep, 5° upsweep, 25.4 mm barbore

GRIPS

Onoff Diamond, 86 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 300 mm, offset 15 mm

SADDLE

Mondraker Leader Kids series

FRONT BRAKE

Tektro Alloy V-Brake

REAR BRAKE

Tektro Alloy V-Brake

BRAKE LEVERS

Tektro 2-finger kids

RIMS

MDK-24 Alloy, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

Formula OV31, 9x100 mm QR axle, cup & cone ball bearings


A B C D E F G H I J K L M

Size

24

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

320 mm 510 mm -30 mm 280 mm 395 mm 71° 71° 68° 40 mm 964 mm 100 mm 340 mm 495 mm

MODEL

COLOR

Leader 24

Black / Light Blue / Flame Red

REAR HUB

Formula OV31, 9x135 mm QR axle, cup & cone ball bearings

FRONT TIRE

Kenda Small Block Eight 24x2.1, single compound, 30TPI, wire bead

REAR TIRE

Kenda Small Block Eight 24x2.1, single compound, 30TPI, wire bead

CRANKSET

Prowheel PRO, 152 mm

CHAINRINGS

36T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-205

CHAIN

KCM Z-72

FRONT DERAILLEUR

/

REAR DERAILLEUR

Shimano Altus M310, 8s

SHIFTERS

Shimano RS45 Revoshift, 8s

CASSETTE

Sunrace CSM66, 11-34T, 8s

DERAILLEUR HANGER

Mondraker M069

MISCELLANEOUS

/

WEIGHT W/O PEDALS

11.6 kg

24 010.19321

113


LEADER 20 Kids

TECHNOLOGIES CUSTOLITE CUSTOMIZED TUBING 20”

SPECIFICATIONS FRAME

Leader 20 7005 Custolite alloy, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

One size 260 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

MDK 20 Kid, Alloy stanchions, Chromoly steering tube

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 25.4 mm barbore, rise: +/-7°, length: 60 mm

HANDLEBAR

MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 560 mm, 9° backsweep, 5° upsweep, 25.4 mm barbore

GRIPS

Onoff Diamond, 75 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 250 mm, offset 15 mm

SADDLE

Mondraker Leader Kids series

FRONT BRAKE

Tektro Alloy V-Brake

REAR BRAKE

Tektro Alloy V-Brake

BRAKE LEVERS

Tektro 2-finger kids

RIMS

MDK-20 Alloy, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

Formula OV31, 9x100 mm QR axle, cup & cone ball bearings


A B C D E F G H I J K L M

Size

20

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

260 mm 440 mm -15 mm 240 mm 350 mm 71° 71° 68° 45 mm 855 mm 100 mm 307 mm 385 mm

MODEL

COLOR

Leader 20

Yellow / Orange

REAR HUB

Formula OV31, 9x135 mm QR axle, cup & cone ball bearings

FRONT TIRE

Kenda Small Block Eight 20x2.1, single compound, 30TPI, wire bead

REAR TIRE

Kenda Small Block Eight 20x2.1, single compound, 30TPI, wire bead

CRANKSET

Prowheel, 140 mm

CHAINRINGS

36T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-P28

CHAIN

KCM Z-50

FRONT DERAILLEUR

/

REAR DERAILLEUR

Shimano TY300, short cage, 6s

SHIFTERS

Shimano RS35, Revoshift, 6s

CASSETTE

Shimano TZ500 14-28T, 6s

DERAILLEUR HANGER

Mondraker M069

MISCELLANEOUS

/

WEIGHT W/O PEDALS

8.9 kg

20 010.19320

115


LEADER 16 Kids

TECHNOLOGIES CUSTOLITE CUSTOMIZED TUBING 16”

SPECIFICATIONS FRAME

Leader 16 7005 Custolite alloy, internal headset, replaceable hanger, BSA bottom bracket, QR 9 mm rear axle

SIZES

One size 210 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

MDK 16 Kid, Alloy stanchions, Chromoly steering tube

HEADSET

CH-9280, Internal ZS, 44 mm external diameter cup

STEM

MDK XC, alloy, 25.4 mm barbore, rise: +/-7°, length: 60 mm

HANDLEBAR

MDK XC 1.0, 6061 alloy, rise: 20 mm, width: 480 mm, 9° backsweep, 5° upsweep, 25.4 mm barbore

GRIPS

Onoff Diamond, 75 mm

SEATPOST

MDK XC, 6061 T6 alloy, diameter 27.2 mm, length 250 mm, offset 15 mm

SADDLE

Mondraker Leader Kids series

FRONT BRAKE

Tektro Alloy V-Brake

REAR BRAKE

Tektro Alloy V-Brake

BRAKE LEVERS

Tektro 2-finger kids

RIMS

MDK-16 Alloy, 32 spokes

SPOKES

CN round stainless steel

FRONT HUB

Formula OV31, 9x100 mm QR axle, cup & cone ball bearings


A B C D E F G H I J K L M

Size

16

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

210 mm 395 mm -10 mm 190 mm 310 mm 69° 69° 70° 30 mm 739 mm 80 mm 284 mm 322 mm

MODEL

COLOR

Leader 16

Light Blue / Navy / Orange

REAR HUB

Formula OV31, 9x135 mm QR axle, cup & cone ball bearings

FRONT TIRE

Kenda Kaos 16x2.1, single compound, 30TPI, wire bead

REAR TIRE

Kenda Kaos 16x2.1, single compound, 30TPI, wire bead

CRANKSET

Prowheel, 102 mm

CHAINRINGS

32T

BOTTOM BRACKET

CH-52

PEDALS

Wellgo LU-P28

CHAIN

KCM Z-50

FRONT DERAILLEUR

/

REAR DERAILLEUR

Shimano FT35, super short cage, 6s

SHIFTERS

Shimano RS35, Revoshift, 6s

CASSETTE

Shimano TZ500 14-28T, 6s

DERAILLEUR HANGER

Mondraker M069

MISCELLANEOUS

/

WEIGHT W/O PEDALS

8.1 kg

16 010.19319

117



e

-

M

T

B

/

A

L

L

M

O

U

N

T

A

I

N


CRUSHER CARBON + FAQs e-MTB All Mountain

WHAT SHOCKS ARE COMPATIBLE WITH CRUSHER CARBON +?

CAN BOTTLE CAGES BE INSTALLED?

Crusher Carbon + is compatible with all kinds of shocks, with or without deposit, Fox DPS, DPX2, RockShox Deluxe, Super Deluxe. It is not compatible with higher volume air shocks like Fox Float X2 or RockShox Vivid Air, and spring shocks are not compatible either. Crushers is assembled with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10 mm bottom bushing is used.

It is possible to install a bottle cage in the down tube.

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN CRUSHER CARBON +? Crusher is compatible with forks up to 170 mm. IS IT COMPATIBLE WITH 29� WHEELS? Crusher Carbon + is compatible with 29� wheels, but it depends on the tyre that we use as it can compromise the space between it and the seat stay, especially with mud. It is important to know that the motor is programmed for the preinstalled wheel diameter, so using a different wheel diameter would change the motor performance and the information shown on the display. CAN I MAKE CHANGES IN THE BIKE SUCH AS TRANSMISION OR TIRES? The bicycles are assembled manually in our Mondraker buildings and the technical measures for each bicycle and its programming is also made by us is order to ensure its perfect performance as well as its corresponding standardization. The tire size, the amount of speeds and teeth of the cogs, etc. is information that is registered in the setting programme of each bike so that it works perfectly and every modification or system upgrade has to be carried out in a Mondraker point of sale. CAN THE CRUSHER CARBON + BATTERY BE REMOVED FROM THE FRAME? The battery can be easily removed from the frame using a 5 mm hex key to remove the carbon inner tap from the down tube.

IS IT COMPATIBLE WITH DI2? Crusher Carbon + is compatible with DI2 shifts. First, it is necessary to upgrade the motor software to enable the Di2 system to work. The DI2 system installed in e-bikes provokes a higher chain and cassette wear due to the power of the motor. Mondraker does not take responsibility for this premature wear. WHAT KIND OF MAINTENANCE OR REVISIONS DO THE MOTORS REQUIRE? Absolutely none. It is not necessary either to oil any of the parts in the motor, or disassemble it, you only have to take the same care as with a traditional mountain bike. But we do have to mention a preventive measure applicable to any current mountain bike: the electric parts and concretely the motor central movement cannot be cleaned with any kind of machinery with pressure washing, so it is not possible to use high pressure washing directly as it may harm the electric parts in the motor. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95


WHICH LENGTH OF DROPPER POST CAN I USE FOR THE CRUSHER CARBON +? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

120,5 mm 120,5 mm 120,5 mm 125 mm 125 mm 125 mm 125 mm 105 mm 105 mm 105 mm 105 mm 125 mm 125 mm 120,5 mm 120,5 mm

160,5 mm 160,5 mm 160,5 mm 165 mm 165 mm 165 mm 165 mm 145 mm 145 mm 145 mm 145 mm 165 mm 165 mm 160,5 mm 160,5 mm

195,5 mm 210,5 mm 210,5 mm 175 mm 200 mm 215 mm 215 mm 195 mm 195 mm 195 mm 195 mm 175 mm 200 mm 210,5 mm 210,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 200 mm 200 mm 225 mm 225 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT

121


CRUSHER CARBON XR+ e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Crusher 27´5+ Sealth Full Carbon Structure, Zero Suspension System, 150 mm travel, Forward Geometry, internal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, custom chainstay protector, Carbon 3K battery cover

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Factory Kashima, 205x62.5 mm. Settings: compression 3 positions lever, low speed compression, low speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, light rebound, air volume spacer 0.6

FORK

Fox 36 29 Float FIT GRIP2 EVOL Factory Kashima, 170 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: high and low-speed compression, high and low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Fox Transfer Factory Kashima internal, diameter 31.6 mm, S size: 365x100 mm, M size: 406x125 mm, L/XL size: 456x150 mm

SADDLE

SDG Bel-Air 2.0, titanium rail, light PU foam

FRONT BRAKE

Shimano Saint M820, 4-piston caliper, RT99 203 mm 2-piece Center Lock rotor with ICE technology, metal pads with cooler

REAR BRAKE

Shimano Saint M820, 4-piston caliper, RT99 203 mm 2-piece Center Lock rotor with ICE technology, metal pads with cooler

BRAKE LEVERS

Shimano Saint, ergonomic antiskid lever with servo wave, free stroke and tool less reach adjust

RIMS

DT Swiss HX1501 Spline One 27´5, 35 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 608 mm -13 mm 347 mm 450 mm 69° 74° 66° 44 mm 1199 mm 100 mm 435 mm 614 mm

420 mm 636 mm -13 mm 347 mm 450 mm 69° 74° 66° 44 mm 1224 mm 100 mm 460 mm 614 mm

470 mm 658 mm -13 mm 347 mm 450 mm 69° 74° 66° 44 mm 1250 mm 115 mm 480 mm 628 mm

500 mm 684 mm -13 mm 347 mm 450 mm 69° 74° 66° 44 mm 1279 mm 130 mm 500 mm 642 mm

MODEL

COLOR

Crusher Carbon XR+

Light Blue / Flame Red / Carbon

S

M

L

XL

010.19225

010.19226

010.19227

010.19228

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 240, 15x110 mm, Center Lock

REAR HUB

DT 240, 12x148 mm, 24T Ratchet system, Center Lock

FRONT TIRE

Maxxis Minion DHF 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

REAR TIRE

Maxxis High Roller II 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

CRANKSET

Shimano E8000 drive unit, BT-E8020 504Wh integrated battery, crankset XT E8050 hollowtech, 165 mm

CHAINRINGS

Sram eagle 34T, alloy, X-SYNC 2

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-EX1, 10s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram EX1, Type 3 roller bearing clutch, cage lock, 1x8s, X-actuation 1:1

SHIFTERS

Sram Trigger EX1, 8s, X-Actuation 1:1

CASSETTE

Sram XG-899, 11-48T, 8s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

22.7 kg

123


CRUSHER CARBON R+ e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Crusher 27´5+ Sealth Full Carbon Structure, Zero Suspension System, 150 mm travel, Forward Geometry, internal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, custom chainstay protector, Carbon 3K battery cover

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x62.5 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, light rebound, air volume spacer 0.6

FORK

Fox 36 29 Float FIT GRIP EVOL Rhythm, 160 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: sweep adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Bel-Air 2.0, Cro-Mo rail, PU foam

FRONT BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT520, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 608 mm -19 mm 343 mm 450 mm 69,5° 74,5° 66,5° 44 mm 1195 mm 100 mm 441 mm 609 mm

420 mm 636 mm -19 mm 343 mm 450 mm 69,5° 74,5° 66,5° 44 mm 1220 mm 100 mm 466 mm 466 mm

470 mm 658 mm -19 mm 343 mm 450 mm 69,5° 74,5° 66,5° 44 mm 1246 mm 115 mm 486 mm 623 mm

500 mm 684 mm -19 mm 343 mm 450 mm 69,5° 74,5° 66,5° 44 mm 1275 mm 130 mm 506 mm 637 mm

MODEL

COLOR

Crusher Carbon R+

Orange / Carbon

S

M

L

XL

010.19221

010.19222

010.19223

010.19224

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

REAR TIRE

Maxxis High Roller II 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

CRANKSET

Shimano E8000 drive unit, BT-E8020 504Wh integrated battery, crankset E8000 hollowtech, 165 mm

CHAINRINGS

Sram eagle 34T, alloy, X-SYNC 2

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1, single click

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

23.5 kg

125


LEVEL FAQs e-MTB All Mountain

WHAT’S THE DIFFERENCE BETWEEN THE CRAFTY + FRAME AND THE LEVEL? Although both Level and Crafty + share the same tube, the geometry is exclusive due to the suspension travel and the wheel diameter in each of these models. WHAT SHOCKS ARE COMPATIBLE WITH LEVEL? Apart from the different shocks preassembled, it is also compatible with FOX Float X2, RockShox Super Deluxe Coil or Air. Level is installed with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10 mm bottom bushing is used. WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN LEVEL? Level is compatible with forks up to 180 mm. IS IT COMPATIBLE WITH 27’5 + WHEELS? Level is compatible with 27’5 + wheels, but you have to take into account that the bottom bracket height may lower considerably depending on the tire size.

IS IT COMPATIBLE WITH DI2? Level is compatible with DI2 shifts. First, it is necessary to upgrade the motor software to enable the Di2 system to use the energy in the motor battery. As it has no inner routing in the chain stay, you have to be extremely cautious to protect the shift cable. The DI2 system installed in e-bikes provoke a higher chain and cassette wear due to the power of the motor. Mondraker does not take responsibility for this premature wear. WHAT KIND OF MAINTENANCE OR REVISIONS DO THE MOTORS REQUIRE? Absolutely none. It is not necessary either to oil any of the parts in the motor, or disassemble it, you only have to take the same care as with a traditional mountain bike. But we do have to mention a preventive measure applicable to any current mountain bike: the electric parts and concretely the motor central movement cannot be cleaned with any kind of machinery with pressure washing, so it is not possible to use high pressure washing directly as it may harm the electric parts in the motor. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide:

CAN I MAKE CHANGES IN THE BIKE SUCH AS TRANSMISION OR TIRES? The bicycles are assembled manually in our Mondraker buildings and the technical measures for each bicycle and its programming is also made by us is order to ensure its perfect performance as well as its corresponding standardization. The tire size, the amount of speeds and teeth of the cogs, etc. is information that is registered in the setting programme of each bike so that it works perfectly and every modification or system upgrade has to be carried out in a Mondraker point of sale. CAN THE LEVEL BATTERY BE REMOVED FROM THE FRAME? The battery can be easily removed from the frame without any tools. CAN BOTTLE CAGES BE INSTALLED? It is possible to install two bottle cages in Level, one under the top tube and other under the down tube.

Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95


WHICH LENGTH OF DROPPER POST CAN I USE FOR THE LEVEL? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

120,5 mm 120,5 mm 120,5 mm 125 mm 125 mm 125 mm 125 mm 105 mm 105 mm 105 mm 105 mm 125 mm 125 mm 120,5 mm 120,5 mm

160,5 mm 160,5 mm 160,5 mm 165 mm 165 mm 165 mm 165 mm 145 mm 145 mm 145 mm 145 mm 165 mm 165 mm 160,5 mm 160,5 mm

195,5 mm 210,5 mm 210,5 mm 175 mm 200 mm 215 mm 215 mm 195 mm 195 mm 195 mm 195 mm 175 mm 200 mm 210,5 mm 210,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 200 mm 200 mm 225 mm 225 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT

127


LEVEL RR e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 150 kg system weight 29”

SPECIFICATIONS FRAME

Level 29 6061 Alloy Stealth Evo, Zero Suspension System, 160 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, exclusive plastic motor covers, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox DHX2 2Pos Lever Factory Kashima, 205x65 mm. Settings: Open/Firm, high and low-speed compression, high and low-speed rebound, spring preload. Super light steel (SLS) spring, Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression. Spring rate: S size 350 lbs, M size 400 lbs, L/XL size 450 lbs

FORK

Fox 36 29 Float FIT GRIP2 EVOL Factory Kashima, 170 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: high and low-speed compression, high and low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 35 mm barbore

HANDLEBAR

Onoff Stoic Carbon, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 35 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Fox Transfer Factory Kashima internal, diameter 31.6 mm, S size: 365x100 mm, M size: 406x125 mm, L/XL size: 456x150 mm

SADDLE

SDG Radar, titanium rail, light PU foam

FRONT BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code RSC, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjust

RIMS

DT Swiss HX1501 Spline One 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 613 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1254 mm 100 mm 433 mm 608 mm

420 mm 642 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1288 mm 120 mm 462 mm 627 mm

470 mm 665 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1316 mm 140 mm 479 mm 645 mm

500 mm 688 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1340 mm 150 mm 498 mm 655 mm

MODEL

COLOR

Level RR

Black / Light Blue / Flame Red

S

M

L

XL

010.19257

010.19258

010.19259

010.19260

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 240, 15x110 mm, IS 6 bolts

REAR HUB

DT 240, 12x148 mm, 24T Ratchet system, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 29x2.5WT, Tubeless ready, 3C compound, DH casing, 60TPI, folding bead

REAR TIRE

Maxxis Minion DHR II 29x2.4WT, Tubeless ready, 3C compound, DH casing, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, RaceFace Aeffect ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-EX1, 10s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram EX1, Type 3 roller bearing clutch, cage lock, 1x8s, X-actuation 1:1

SHIFTERS

Sram Trigger EX1, 8s, X-Actuation 1:1

CASSETTE

Sram XG-899, 11-48T, 8s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

25.2 kg

129


LEVEL R e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 150 kg system weight 29”

SPECIFICATIONS FRAME

Level 29 6061 Alloy Stealth Evo, Zero Suspension System, 160 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, exclusive plastic motor covers, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox DHX2 2Pos Lever Performance Elite, 205x65 mm. Settings: Open/Firm, low-speed compression, low-speed rebound, spring preload. Steel spring, Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression. Spring rate: S size 350 lbs, M size 400 lbs, L/XL size 450 lbs

FORK

Fox 36 29 Float FIT GRIP EVOL Rhythm, 170 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: sweep adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Radar, Cro-Mo rail, PU foam

FRONT BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT520, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 29, 30 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 613 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1254 mm 100 mm 433 mm 608 mm

420 mm 642 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1288 mm 120 mm 462 mm 627 mm

470 mm 665 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1316 mm 140 mm 479 mm 645 mm

500 mm 688 mm -15 mm 356 mm 490 mm 74° 74° 65° 44 mm 1340 mm 150 mm 498 mm 655 mm

MODEL

COLOR

Level R

Black / Yellow / Orange

S

M

L

XL

010.19253

010.19254

010.19255

010.19256

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 29x2.5WT, Tubeless ready, 3C compound, DH casing, 60TPI, folding bead

REAR TIRE

Maxxis Minion DHR II 29x2.4WT, Tubeless ready, 3C compound, DH casing, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, RaceFace Aeffect ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

25.7 kg

131


CRAFTY + FAQs e-MTB All Mountain

WHAT SHOCKS ARE COMPATIBLE WITH CRAFTY +?

IS IT COMPATIBLE WITH DI2?

Crafty is compatible with all kinds of shocks, with or without deposit, Fox DPS, DPX2, RockShox Deluxe, Super Deluxe. It is not compatible with higher volume air shocks like Fox Float X2 or RockShox Vivid Air, and spring shocks are not compatible either. Crafty is assembled with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10mm bottom bushing is used.

Crafty + is compatible with DI2 shifts. First, it is necessary to upgrade the motor software to enable the Di2 system to use the energy in the motor battery. As it has no inner routing in the chain stay, you have to be extremely cautious to protect the shift cable. The DI2 system installed in e-bikes provoke a higher chain and cassette wear due to the power of the motor. Mondraker does not take responsibility for this premature wear.

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN CRAFTY +?

WHAT KIND OF MAINTENANCE OR REVISIONS DO THE MOTORS REQUIRE?

Crafty is compatible with forks up to 160 mm. IS IT COMPATIBLE WITH 29” WHEELS? Crafty + is not compatible with 29” wheels, as the frame is designed to use only 27’5 + 2.8” wheels, the perfect combination for an e-bike with these features, providing the traction in uphills and the grip and brake power in downhills which are perfect to have the most fun on the bike. CAN I MAKE CHANGES IN THE BIKE SUCH AS TRANSMISION OR TIRES? The bicycles are assembled manually in our Mondraker buildings and the technical measures for each bicycle and its programming is also made by us is order to ensure its perfect performance as well as its corresponding standardization. The tire size, the amount of speeds and teeth of the cogs, etc. is information that is registered in the setting programme of each bike so that it works perfectly and every modification or system upgrade has to be carried out in a Mondraker point of sale. CAN THE BATTERY IN CRAFTY + BE REMOVED FROM THE FRAME? The battery can be easily removed from the frame without any tools. CAN BOTTLE CAGES BE INSTALLED? It is possible to install two bottle cages in Crafty +, one under the top tube and other under the down tube.

Absolutely none. It is not necessary either to oil any of the parts in the motor, or disassemble it, you only have to take the same care as with a traditional mountain bike. But we do have to mention a preventive measure applicable to any current mountain bike: the electric parts and concretely the motor central movement cannot be cleaned with any kind of machinery with pressure washing, so it is not possible to use high pressure washing directly as it may harm the electric parts in the motor. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95


WHICH LENGTH OF DROPPER POST CAN I USE FOR THE CRAFTY +? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

120,5 mm 120,5 mm 120,5 mm 125 mm 125 mm 125 mm 125 mm 105 mm 105 mm 105 mm 105 mm 125 mm 125 mm 120,5 mm 120,5 mm

160,5 mm 160,5 mm 160,5 mm 165 mm 165 mm 165 mm 165 mm 145 mm 145 mm 145 mm 145 mm 165 mm 165 mm 160,5 mm 160,5 mm

195,5 mm 210,5 mm 210,5 mm 175 mm 200 mm 215 mm 215 mm 195 mm 195 mm 195 mm 195 mm 175 mm 200 mm 210,5 mm 210,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 200 mm 200 mm 225 mm 225 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT

133


CRAFTY RR+ e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5+”

SPECIFICATIONS FRAME

Crafty 27´5+ 6061 Alloy Stealth Evo, Zero Suspension System, 150 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, exclusive plastic motor covers, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x65 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, extralight rebound

FORK

Fox 36 29 Float FIT4 EVOL Factory Kashima, 160 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: 3 positions with micro adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Bel-Air 2.0, Cro-Mo rail, PU foam

FRONT BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

REAR BRAKE

Sram Code R, oversized 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads

BRAKE LEVERS

Sram Code R, tool-free reach adjust

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 615 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1242 mm 100 mm 442 mm 605 mm

420 mm 642 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1276 mm 120 mm 467 mm 624 mm

470 mm 667 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1304 mm 140 mm 487 mm 642 mm

500 mm 690 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1328 mm 150 mm 507 mm 652 mm

MODEL

COLOR

Crafty RR+

Black / Orange / Light Blue

S

M

L

XL

010.19249

010.19250

010.19251

010.19252

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

REAR TIRE

Maxxis High Roller II 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, RaceFace Aeffect ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram NX Eagle, 12s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1

SHIFTERS

Sram Trigger NX Eagle, 12s, X-Actuation 1:1, single click

CASSETTE

Sram PG-1230, 11-50T, 12s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

25.2 kg

135


CRAFTY R+ e-MTB All Mountain

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 27’5+”

SPECIFICATIONS FRAME

Crafty 27´5+ 6061 Alloy Stealth Evo, Zero Suspension System, 150 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, exclusive plastic motor covers, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

Fox Float DPX2 LV EVOL Performance, 205x65 mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10 mm bottom bushings

REAR SHOCK SETTING

Light compression, extralight rebound

FORK

Fox 36 29 Float FIT GRIP EVOL Rhythm, 160 mm, e-bike optimized, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: sweep adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 25 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

SDG Bel-Air 2.0, Cro-Mo rail, PU foam

FRONT BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT520, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 615 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1242 mm 100 mm 442 mm 605 mm

420 mm 642 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1276 mm 120 mm 467 mm 624 mm

470 mm 667 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1304 mm 140 mm 487 mm 642 mm

500 mm 690 mm -19 mm 337 mm 475 mm 74,3° 74,3° 65,3° 44 mm 1328 mm 150 mm 507 mm 652 mm

MODEL

COLOR

Crafty R+ Crafty R+

Black Phantom Black / Blue / Yellow

S

M

L

XL

010.19241 010.19245

010.19242 010.19246

010.19243 010.19247

010.19244 010.19248

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion DHF 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

REAR TIRE

Maxxis High Roller II 27´5x2.8, Tubeless ready, Dual compound, Exo Protection, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, RaceFace Aeffect ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

24.9 kg

137



e

-

M

T

B

/

T

R

A

I

L


CHASER + FAQs e-MTB Trail

WHAT SHOCKS ARE COMPATIBLE WITH CHASER +?

IS IT COMPATIBLE WITH DI2?

Chaser + is compatible with all kinds of shocks, with or without deposit, like Fox DPS, DPX2, RockShox Deluxe, Super Deluxe. It is not compatible with higher volume air shocks like Fox Float X2 or RockShox Vivid Air, and spring shocks are not compatible either. Chaser is assembled with metric measuring shocks with Trunnion mount, so it does not require upper bushings whereas a 22.2x10 mm bottom bushing is used.

Crafty + is compatible with DI2 shifts. First, it is necessary to upgrade the motor software to enable the Di2 system to use the energy in the motor battery. As it has no inner routing in the chain stay, you have to be extremely cautious to protect the shift cable. The DI2 system installed in e-bikes provoke a higher chain and cassette wear due to the power of the motor. Mondraker does not take responsibility for this premature wear.

WHAT IS THE MAXIMUM FORK TRAVEL THAT CAN BE INSTALLED IN CHASER +?

WHAT KIND OF MAINTENANCE OR REVISIONS DO THE MOTORS REQUIRE?

Chaser + is compatible with forks up to 160 mm. IS IT COMPATIBLE WITH 29” WHEELS? Chaser + is not compatible with 29” wheels, as the frame is designed to use only 27’5 + 2.8” wheels, the perfect combination for an e-bike with these features, providing the traction in uphills and the grip and brake power in downhills which are perfect to have the most fun on the bike. CAN I MAKE CHANGES IN THE BIKE SUCH AS TRANSMISION OR TIRES? The bicycles are assembled manually in our Mondraker buildings and the technical measures for each bicycle and its programming is also made by us is order to ensure its perfect performance as well as its corresponding standardization. The tyre size, the amount of speeds and teeth of the cogs, etc. is information that is registered in the setting programme of each bike so that it works perfectly and every modification or system upgrade has to be carried out in a Mondraker point of sale. CAN THE BATTERY IN CHASER BE REMOVED FROM THE FRAME? The battery can be easily removed from the frame without any tools. CAN BOTTLE CAGES BE INSTALLED? It is possible to install two bottle cages in Crafty +, one under the top tube and other under the down tube.

Absolutely none. It is not necessary either to oil any of the parts in the motor, or disassemble it, you only have to take the same care as with a traditional mountain bike. But we do have to mention a preventive measure applicable to any current mountain bike: the electric parts and concretely the motor central movement cannot be cleaned with any kind of machinery with pressure washing, so it is not possible to use high pressure washing directly as it may harm the electric parts in the motor. WHAT SIZE SHOULD I BUY? The size use differs depending on the user. Personal preferences are very different and what the bike is used for also matter when making this decision. This is a general chart that can be used as a guide: Size

Height (m)

S M L XL

1.58 - 1.68 1.67 - 1.76 1.75 - 1.86 1.85 - 1.95


WHICH LENGTH OF DROPPER POST CAN I USE FOR THE CHASER +? Bike design due to the exclusive rear suspension and shock placement and the short seat tube makes it necessary to be aware on the dropper post length. This chart shows the length of the dropper post that, as maximum, can be lowered with Onoff Pija, RockShox Reverb Stealth and Fox Transfer internal routing posts as examples.

MODEL FOX TRANSFER 100 mm FOX TRANSFER 125 mm FOX TRANSFER 150 mm RS REVERB 100 mm RS REVERB 125 mm RS REVERB 150 mm RS REVERB 170 mm RS REVERB CJ 100 mm RS REVERB CJ 125 mm RS REVERB CJ 150 mm RS REVERB CJ 170 mm ONOFF PIJA 100 mm ONOFF PIJA 125 mm ONOFF PIJA 150 mm ONOFF PIJA 170 mm

MAX SEATPOST INSERT Size S

Size M

Size L

Size XL

120,5 mm 120,5 mm 120,5 mm 125 mm 125 mm 125 mm 125 mm 105 mm 105 mm 105 mm 105 mm 125 mm 125 mm 120,5 mm 120,5 mm

160,5 mm 160,5 mm 160,5 mm 165 mm 165 mm 165 mm 165 mm 145 mm 145 mm 145 mm 145 mm 165 mm 165 mm 160,5 mm 160,5 mm

195,5 mm 210,5 mm 210,5 mm 175 mm 200 mm 215 mm 215 mm 195 mm 195 mm 195 mm 195 mm 175 mm 200 mm 210,5 mm 210,5 mm

195,5 mm 220,5 mm 245,5 mm 175 mm 200 mm 225 mm 245 mm 200 mm 200 mm 225 mm 225 mm 175 mm 200 mm 220,5 mm 245,5 mm

MAX SEATPOST INSERT

141


CHASER XR+ e-MTB Trail

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Chaser 27´5+ 6061 Alloy Stealth Evo, Zero Suspension System, 130 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

RockShox Monarch RT, 200x57 mm, Solo Air Settings: compression 2 positions lever, rebound, air preload. 22.2x10 mm bushings

REAR SHOCK SETTING

Light compression, light rebound

FORK

RockShox Revelation RC Motion control 29, 150 mm, DebonAir, tapered steerer tube, 15x110 mm axle, offset 42 mm. Settings: compression adjustment at lowspeed to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 780 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Chaser XR design

FRONT BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 605 mm -12 mm 349 mm 475 mm 74.5° 74.5° 66.5° 42 mm 1210 mm 100 mm 445 mm 589 mm

420 mm 635 mm -12 mm 349 mm 475 mm 74.5° 74.5° 66.5° 42 mm 1242 mm 120 mm 470 mm 607 mm

470 mm 660 mm -12 mm 349 mm 475 mm 74.5° 74.5° 66.5° 42 mm 1270 mm 140 mm 490 mm 625 mm

500 mm 685 mm -12 mm 349 mm 475 mm 74.5° 74.5° 66.5° 42 mm 1294 mm 150 mm 510 mm 634 mm

MODEL

COLOR

S

M

L

XL

Chaser XR+

Yellow

010.19209

010.19210

010.19211

010.19212

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Rekon 27´5x2.8, tubeless ready, Dual compound, Exo-protection, 60TPI, folding bead

REAR TIRE

Maxxis Rekon 27´5x2.8, tubeless ready, Dual compound, Exo-protection, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Shimano HG601, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Shimano XT M8000, Shadow+, SGS, 11s

SHIFTERS

Shimano SLX M7000, 11s

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

23.2 kg

143


CHASER + e-MTB Trail

TECHNOLOGIES ZERO SUSPENSION SYSTEM STEALTH SIDE ALLOY STRUCTURE FORWARD GEOMETRY 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Chaser 27´5+ 6061 Alloy Stealth Evo, Zero Suspension System, 130 mm travel, Forward Geometry, intenal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, shock mudguard

SIZES

S: 380 mm / M: 420 mm / L: 470 mm / XL: 500 mm

REAR SHOCK

RockShox Monarch R, 200x57 mm, Solo Air. Settings: rebound, air preload. 22.2x10 mm bushings

REAR SHOCK SETTING

Light compression, light rebound

FORK

Rockshox Recon RL 29, 140 mm, Solo Air, tapered steerer tube, 15x110 mm Boost axle, 51 mm alloy stanchions, offset 42 mm. Settings: compression adjustment at low-speed to lock, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Chaser design

FRONT BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 605 mm -15 mm 345 mm 475 mm 75° 75° 67° 42 mm 1206 mm 100 mm 450 mm 579 mm

420 mm 635 mm -15 mm 345 mm 475 mm 75° 75° 67° 42 mm 1238 mm 120 mm 475 mm 597 mm

470 mm 660 mm -15 mm 345 mm 475 mm 75° 75° 67° 42 mm 1266 mm 140 mm 495 mm 615 mm

500 mm 685 mm -15 mm 345 mm 475 mm 75° 75° 67° 42 mm 1290 mm 150 mm 515 mm 624 mm

MODEL

COLOR

Chaser + Chaser +

Black / Light Blue Light Blue / Black

S

M

L

XL

010.19201 010.19205

010.19202 010.19206

010.19203 010.19207

010.19204 010.19208

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Maxxis Rekon 27´5x2.8, tubeless ready, Dual compound, Exo-protection, 60TPI, folding bead

REAR TIRE

Maxxis Rekon 27´5x2.8, tubeless ready, Dual compound, Exo-protection, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 165 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1031, 10s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX, long cage, 10s, X-actuation 1:1

SHIFTERS

Sram Trigger X5, 10s, X-Actuation 1:1

CASSETTE

Sunrace CSMS2, 11-42T, 10s

DERAILLEUR HANGER

Mondraker M067

MISCELLANEOUS

/

WEIGHT W/O PEDALS

23.3 kg

145


PANZER R e-MTB Trail

TECHNOLOGIES STEALTH SIDE ALLOY STRUCTURE 2.0 FORWARD GEOMETRY 150 kg system weight 26”

SPECIFICATIONS FRAME

Panzer fatbike 6061 Xtralite Alloy, Forward Geometry, tapered head tube, HHG internal cable routing, QR 12x190 mm rear axle

SIZES

S: 380 mm / M: 430 mm / L: 480 mm / XL: 520 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox Bluto RL Fat Bike 120 mm, tapered steerer tube, 15x150 mm axle, offset 51 mm. Settings: low-speed compression to lockout, rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Panzer design

FRONT BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT520, 4-piston caliper, RT66 203 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT520, servo wave, alloy lever

RIMS

DT Swiss BR2250, 76 mm internal width, welded with cut outs, 32 spokes

SPOKES

DT Competition

FRONT HUB

DT 350, 15x150 mm, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

380 mm 615 mm -55 mm 315 mm 485 mm 73.5° 73.5° 68.5° 51 mm 1190 mm 90 mm 433 mm 614 mm

430 mm 635 mm -55 mm 315 mm 485 mm 73.5° 73.5° 68.5° 51 mm 1211 mm 100 mm 451 mm 623 mm

480 mm 660 mm -55 mm 315 mm 485 mm 73.5° 73.5° 68.5° 51 mm 1237 mm 110 mm 473 mm 632 mm

520 mm 685 mm -55 mm 315 mm 485 mm 73.5° 73.5° 68.5° 51 mm 1263 mm 125 mm 494 mm 646 mm

MODEL

COLOR

Panzer R

Black / Light Blue / Flame Red

S

M

L

XL

010.19237

010.19238

010.19239

010.19240

REAR HUB

DT 350, 12x197 mm, IS 6 bolts

FRONT TIRE

Maxxis Minion FBF 26x4.8, tubeless ready, dual compound, Exo protection, 120 TPI, folding bead

REAR TIRE

Maxxis Minion FBR 26x4.8, tubeless ready, dual compound, Exo protection, 120 TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerPack battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 170 mm

CHAINRINGS

Miranda 14T, 20 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS8, 11-46T, 11s

DERAILLEUR HANGER

Mondraker M070

MISCELLANEOUS

/

WEIGHT W/O PEDALS

22.5 kg

147


PRIME CARBON SX+ e-MTB Trail

TECHNOLOGIES STEALTH SIDE CARBON STRUCTURE FORWARD GEOMETRY FLAT STAYS 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Prime 27´5+ Stealth Full Carbon, Forward Geometry, tapered head tube, HHG internal cable routing, Boost 12x148 mm rear axle

SIZES

S: 390 mm / M: 430 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Stealth Full carbon fork 27´5+, 15x110 mm axle

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Ergo, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

Mondraker Prime SX design

FRONT BRAKE

Magura MT5E 203 mm, 4 piston caliper, Storm 203 mm IS 6 bolts rotor

REAR BRAKE

Magura MT5E 203 mm, 4 piston caliper, Storm 203 mm IS 6 bolts rotor

BRAKE LEVERS

Magura MT5E, brake light sensor, reach adjust

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

390 mm 609 mm -73 mm 295 mm 480 mm 75° 75° 70° 43 mm 1151 mm 90 mm 440 mm 605 mm

430 mm 634 mm -73 mm 295 mm 480 mm 75° 75° 70° 43 mm 1182 mm 100 mm 470 mm 615 mm

470 mm 657 mm -73 mm 295 mm 480 mm 75° 75° 70° 43 mm 1213 mm 110 mm 495 mm 625 mm

510 mm 681 mm -73 mm 295 mm 480 mm 75° 75° 70° 43 mm 1244 mm 120 mm 525 mm 635 mm

MODEL

COLOR

Prime Carbon SX+

Black Phantom

S

M

L

XL

010.19229

010.19230

010.19231

010.19232

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Schwalbe Super Moto X 27´5x2.8, RaceGuard, SnakeSkin, ECE-R75

REAR TIRE

Schwalbe Super Moto X 27´5x2.8, RaceGuard, SnakeSkin, ECE-R75

CRANKSET

Bosch Performance Line Speed system, PowerPack battery 500Wh , Intuvia on-board computer, Sram EX1 crankset, 175 mm

CHAINRINGS

Sram 18T, X-Sync

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger GX, 11s, X-Actuation 1:1

CASSETTE

Sram PG-1130, 11-42T, 11s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

Busch&Müller Lumotec IQ-X front light, rear/brake light, plate holder, mirror and horn. SKS custom fenders. Kickstand

WEIGHT W/O PEDALS

21 kg

149


PRIME R+ e-MTB Trail

TECHNOLOGIES FORWARD GEOMETRY XTRALITE FULL BUTTED ALLOY FLAT STAYS 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Prime 27´5+ 6061 Xtralite Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148 mm rear axle

SIZES

S: 390 mm / M: 430 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

Fox 36 29 Float FIT GRIP EVOL Rhythm, 120 mm, tapered steerer tube, 15x110 mm axle, offset 44 mm. Settings: sweep adjust compression, low-speed rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Pija dropper internal, diameter 31.6 mm, S size: 337x100 mm, M size 387x125 mm, L/XL size: 425x150 mm

SADDLE

Mondraker Prime R+ design

FRONT BRAKE

Shimano MT501, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT501, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT501, servo wave, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull


A B C D E F G H I J K L M

Size

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

390 mm 610 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1177 mm 90 mm 426 mm 620 mm

430 mm 640 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1208 mm 100 mm 453 mm 629 mm

470 mm 670 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1238 mm 110 mm 480 mm 639 mm

510 mm 700 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1269 mm 120 mm 508 mm 648 mm

MODEL

COLOR

S

M

L

XL

Prime R+

Amber

010.19286

010.19287

010.19288

010.19289

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Kenda Havok Sport 27´5x2.8, tubeless ready, 60TPI, folding bead

REAR TIRE

Kenda Havok Sport 27´5x2.8, tubeless ready, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 170 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1110, 11s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram NX, Type 3 roller bearing clutch, cage lock, long cage, 1x11s, X-actuation 1:1

SHIFTERS

Sram Trigger NX, 11s, X-Actuation 1:1

CASSETTE

Sunrace CSMS7, 11-42T, 11s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

21.7 kg

151


PRIME + e-MTB Trail

TECHNOLOGIES FORWARD GEOMETRY XTRALITE FULL BUTTED ALLOY FLAT STAYS 150 kg system weight 27’5+”

SPECIFICATIONS FRAME

Prime 27´5+ 6061 Xtralite Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148 mm rear axle

SIZES

XS: 370 mm / S: 390 mm / M: 430 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox Judy Silver 29, 120 mm (XS size 100mm), Solo Air, tapered steerer tube, 15x110 mm axel, 30 mm steel stanchions, offset 51 mm. Settings: 2 pos remote compression (open/lock), rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

Mondraker Prime+ design

FRONT BRAKE

Shimano MT400, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT400, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT400, alloy lever

RIMS

DT Swiss H1900 Spline 27´5, 35 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull


A B C D E F G H I J K L M

Size

XS

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

370 mm 580 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1142 mm 90 mm 396 mm 620 mm

390 mm 610 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1177 mm 90 mm 426 mm 620 mm

430 mm 640 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1208 mm 100 mm 453 mm 629 mm

470 mm 670 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1238 mm 110 mm 480 mm 639 mm

510 mm 700 mm -60 mm 296 mm 485 mm 73.5° 73.5° 69° 51 mm 1269 mm 120 mm 508 mm 648 mm

MODEL

COLOR

Prime + Prime +

Black / Orange Light Blue / Orange

XS

S

M

L

XL

010.19280 010.19290

010.19281 010.19291

010.19282 010.19292

010.19283 010.19293

010.19284 010.19294

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Kenda Havok Sport 27´5x2.8, tubeless ready, 60TPI, folding bead

REAR TIRE

Kenda Havok Sport 27´5x2.8, tubeless ready, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 170 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1031, 10s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX, long cage, 10s, X-actuation 1:1

SHIFTERS

Sram Trigger X5, 10s, X-Actuation 1:1

CASSETTE

Sunrace CSMS2, 11-42T, 10s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

21.7 kg

153


PRIME 29 e-MTB Trail

TECHNOLOGIES FORWARD GEOMETRY XTRALITE FULL BUTTED ALLOY FLAT STAYS 150 kg system weight 29”

SPECIFICATIONS FRAME

Prime 27´5+ 6061 Xtralite Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148 mm rear axle

SIZES

XS: 370 mm / S: 390 mm / M: 430 mm / L: 470 mm / XL: 510 mm

REAR SHOCK

/

REAR SHOCK SETTING

/

FORK

RockShox Judy Silver 29, 120 mm (XS size 100 mm), Solo Air, tapered steerer tube, 15x110 mm axel, 30 mm steel stanchions, offset 51 mm. Settings: 2 pos remote compression (open/lock), rebound, air preload

HEADSET

Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°

STEM

Onoff Stoic FG 30 mm, 6061 forged alloy, 31.8 mm barbore

HANDLEBAR

Mondraker double butted 6061 alloy, rise: 12 mm, width: 760 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore

GRIPS

Onoff Diamond, 1lock-on, 130 mm

SEATPOST

Onoff Notion 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm

SADDLE

Mondraker Prime+ design

FRONT BRAKE

Shimano MT400, RT66 203 mm IS 6 bolts rotor, resin pads

REAR BRAKE

Shimano MT400, RT66 180 mm IS 6 bolts rotor, resin pads

BRAKE LEVERS

Shimano MT400, alloy lever

RIMS

DT Swiss H1900 Spline 29, 30 mm internal width, tubeless ready, 28 spokes

SPOKES

DT Hybrid SP, straight pull


A B C D E F G H I J K L M

Size

XS

S

M

L

XL

Seat Tube Length Top Tube Length Bottom Bracket Drop Bottom Bracket Height Chainstay Legth Seat Tube Angle, Actual Seat Tube Angle, Effective Head Tube Angle Fork Offset Wheelbase (445 mm) Head Tube Length Reach Stack

370 mm 580 mm -60 mm 308 mm 485 mm 73.5° 73.5° 69° 51 mm 1142 mm 90 mm 396 mm 620 mm

390 mm 610 mm -60 mm 308 mm 485 mm 73.5° 73.5° 69° 51 mm 1177 mm 90 mm 426 mm 620 mm

430 mm 640 mm -60 mm 308 mm 485 mm 73.5° 73.5° 69° 51 mm 1208 mm 100 mm 453 mm 629 mm

470 mm 670 mm -60 mm 308 mm 485 mm 73.5° 73.5° 69° 51 mm 1238 mm 110 mm 480 mm 639 mm

510 mm 700 mm -60 mm 308 mm 485 mm 73.5° 73.5° 69° 51 mm 1269 mm 120 mm 508 mm 648 mm

MODEL

COLOR

Prime 29 Prime 29

Black / Orange Light Blue / Orange

XS

S

M

L

XL

010.19270 010.19275

010.19271 010.19276

010.19272 010.19277

010.19273 010.19278

010.19274 010.19279

FRONT HUB

DT 370, 15x110 mm, IS 6 bolts

REAR HUB

DT 370, 12x148 mm, IS 6 bolts

FRONT TIRE

Kenda Nevegal Pro II Sport 29x2.4, tubeless ready, Dual compound, 60TPI, folding bead

REAR TIRE

Kenda Nevegal Pro II Sport 29x2.4, tubeless ready, Dual compound, 60TPI, folding bead

CRANKSET

Bosch Performance Line CX system, PowerTube battery 500Wh , Purion on-board computer, Miranda Delta ebike crankset, 170 mm

CHAINRINGS

MDK 16T, narrow-wide, 6 mm offfset

BOTTOM BRACKET

/

PEDALS

/

CHAIN

Sram PC-1031, 10s

FRONT DERAILLEUR

/

REAR DERAILLEUR

Sram GX, long cage, 10s, X-actuation 1:1

SHIFTERS

Sram Trigger X5, 10s, X-Actuation 1:1

CASSETTE

Sunrace CSMS2, 11-42T, 10s

DERAILLEUR HANGER

Mondraker M066

MISCELLANEOUS

/

WEIGHT W/O PEDALS

21.5 kg

155



S

P

A

R

E

P

A

R

T

S


SUMMUM CARBON Spare Parts 25 32

1

38 31 36

4 25 5 DETAIL 01

2

26 33

27

24

DETAIL 02

9 3

38 7 6 Grease Sealant

8

Grease + Sealant

34

24

Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK UPPER LINK, LEFT UPPER LINK, RIGHT HANGER CHIP, LEFT CHIP, RIGHT HUB AXLE SPACER, 37MM BEARING, 12X21X5 BEARING, 12X24X6 BEARING, 12X28X8 SPACER, 3MM PIVOT AXLE, 18MM PIVOT AXLE, 18MM PIVOT AXLE, 80.5MM C-RING BEARING, 8X16X5 SHOCK BOLT BOLT NUT TAPER NUT

QTY. 1 1 1 1 1 1 1 1 1 1 4 4 2 4 2 2 2 6 8 2 2 2

PART NUMBER

TORQUE

099.15035

SET5 099.15041 099.15042 099.15036 SET4 SET1 SET1 SET1 SET3 SET3 SET3 SET4 SET2 SET1 SET2 SET2 SET4

10Nm

8Nm

10-12Nm

ITEM No. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

DESCRIPTION SPACER SCREW BOLT M5x20 HS ADAPTOR, 0 DEGREE DISC MOUNT SCREW SPACER, 3MM SPACER, 3MM SCREW BOLT M6x25 SEAT CLAMP FORK BUMPER CABLE HOLDER CABLE RUBBER SPACER, 29MM SCREW BOLT M5x20 CHAIN PROTECTOR SCREW BOLT C-RING C-RING PIVOT AXLE, M12 PIVOT AXLE SHOCK SPACER

QTY. 2 3 2 1 2 2 2 2 1 2 1 4 1 1 1 3 2 2 2 2 4

PART NUMBER

TORQUE

SET4 6Nm 099.15030 8Nm SET4 SET4 SET4 099.15031 099.15039 099.15012 989.13010 SET4

10Nm

099.15107 3Nm SET3 SET3 SET3 SET3 SET2

11Nm 11Nm


DETAIL 02

DETAIL 01

20

15

28

14 39

43

42

19

40

41

13

39 12

29 17

14 18

14

19

12

23 19

30

18

10

28

13

18

43

40

35

22

21

16

15

18

11

12

21

42

17

12 22

29

18 19

23 30

18 20

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 10

SHOCK HARDWARE ZERO 7

UPPER LINK HARDWARE KIT 22

LOWER LINK HARDWARE KIT 15

HANGER M063

PART NUMBER

DESCRIPTION

COMPONENTS

099.15500

SET 1: ZERO BEARING KIT 10

099.13104 099.18113

SET 2: SHOCK HARDWARE ZERO 7 SET 3: UPPER LINK HARDWARE KIT 22

TAPER NUT (x2) / BEARING 688-RS (INT. 8MM. EXT 16MM) (x8) / BEARING 6901V-2RS (INT. 12MM. EXT 24MM) (x4) / BEARING 6801V-2RS (INT. 12MM. EXT 21MM) (x4) O-RING (x6) / SHOCK SPACER (x4) / SHOCK BOLT M8 (x2) / BOLT NUT M8 (x2) SPACER, 3MM (x4) / PIVOT AXLE, 18MM (x2) / PIVOT AXLE, 18MM (x2) / C-RING (x2) / C-RING (x2) / PIVOT AXLE, M12 (x2) / PIVOT AXLE (x2)

ONLY FOR 2018 MODELS OR OLDER MODELS WITH UPPER LINK UPGRADE KIT WITH CIRCLIPS (099.17109)

099.17109

UPPER LINK UPGRADE KIT FOR 2015/2016/2017 MODELS

099.15502

SET 4: LOWER LINK KIT 15

099.00046

SET 5: HANGER M063

UPPER LINK, LEFT, ANODIZED BLACK (x1) / UPPER LINK, RIGHT, ANODIZED BLACK (x1) / PIVOT AXLE, M12 (x2) / PIVOT AXLE, M12 (x2) / O-RING 24 (x2) / O-RING 28 (x2) PIVOT AXLE 80.5MM (x2) / SPACER D x37 (x1) / SPACER D x3(x2) / SPACER D x3 (x2) / SPACER D x (x2) / TAPER NUT (x2) / SPACER D x29 (x1) / M6x25L-P-S SCREW BOLT (x2) HANGER (x1) / SCREW BOLT (x2)

159


SUMMUM Spare Parts

23 22

2

DETAIL 01

25

3

21 DETAIL 02

18 1 19 18 16

Grease

17

Sealant

20

Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13

DESCRIPTION LOWER LINK UPPER LINK, LEFT UPPER LINK, RIGHT BEARING 6900-RS SPACER BEARING 6000-2RS PIVOT AXLE PIVOT AXLE LOCK WASHER BEARING CAP SCREW M6X16 BEARING 688-RS O-RING

QTY. 1 1 1 6 2 2 2 4 2 4 6 8 6

PART NUMBER 099.13017 099.15015 099.15016 SET1 SET 4 SET1 SET 4 SET 3 SET 4 SET 3 SET 3/4 SET1 SET 2

TORQUE

10Nm

ITEM No. 14 15 16 17 18 19 20 21 22 23 24 25

DESCRIPTION SHOCK BOLT BOLT NUT HANGER SCREW BOLT M5x20 SCREW BOLT M6x15 RC 440mm ADAPTOR-L RC 440mm ADAPTOR-R HUB AXLE CABLE HOLDER SCREW BOLT M5x15 SHOCK SPACER CABLE RUBBER

QTY. 2 2 1 1 2 1 1 1 2 2 4 1

PART NUMBER

TORQUE

SET 2 SET 2 SET 5 SET 5

10-12Nm

099.12110 099.15017

10Nm

5Nm 5Nm

3Nm SET 2 989.13010


DETAIL 02

DETAIL 01

7 11

10

4

12

13

14

8

7 24 9 11 5

14

13

12

12

13

6

24

8

15

10

11

4

15

4

5

11

9

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 7

SHOCK HARDWARE ZERO 7

UPPER LINK HARDWARE KIT 10

LOWER LINK HARDWARE KIT 11

HANGER M051

PART NUMBER

DESCRIPTION

COMPONENTS

099.13103 099.13104 099.13105 099.13106 099.13107 099.15900

SET 1: ZERO BEARING KIT 7 SET 2: SHOCK HARDWARE ZERO 7 SET 3: UPPER LINK HARDWARE KIT 10 SET 4: LOWER LINK HARDWARE KIT 11 SET 5: HANGER M051 ADJUSTABLE GEOMETRY KIT SUMMUM PRO TEAM 2015 T-S/M

099.15901

ADJUSTABLE GEOMETRY KIT SUMMUM PRO TEAM 2015 T-L/XL

BEARING 6900-RS (x6) / BEARING 6000-2RS (x2) / BEARING 688-RS (x8) O-RING (x6) / SHOCK SPACER (x4) / SHOCK BOLT M8 (x2) / BOLT NUT M8 (x2) M6X16 SCREW (x4) / PIVOT AXLE (x4) / BEARING CAP (x4) SPACER D14x35 (x2) / LOCK WASHER (x2) / M6X16 SCREW (x2) / PIVOT AXLE (x2) HANGER M051 (x1) / M5x20L-P SCREW BOLT (x1) DISC MOUNT 445 (x1) / DISC MOUNT 450 (x1) / DISC MOUNT 460 (x1) / CHIP RIGHT-LEFT 450 / CHIP RIGHT-LEFT 455 / CHIP RIGHT-LEFT 460 / HS ADAPTOR 1° (x2) / HS ADAPTOR 2° (x2) / HS ADAPTOR 0º (x2) DISC MOUNT 445 (x1) / DISC MOUNT 450 (x1) / DISC MOUNT 460 (x1) / CHIP RIGHT-LEFT 450 / CHIP RIGHT-LEFT 455 / CHIP RIGHT-LEFT 460 / HS ADAPTOR 1° (x2) / HS ADAPTOR 2° (x2) / HS ADAPTOR 0º (x2)

161


DUNE CARBON Spare Parts

17

1 26

20

27

36 35

41

DETAIL 01

29 41

2

35

21

20

18

22 19

20

DETAIL 02

42

3 43 15

30

11 12 13 14

Grease

15

Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK BEARING, 12X21X5 BEARING, 12X24X6 SPACER, 27MM SPACER, 3MM SPACER, 3MM TAPER NUT PIVOT AXLE, 70.5MM CS-CHIP, LEFT, OUTTER CS-CHIP, LEFT, INNER CS-CHIP, RIGHT, INNER CS-CHIP, RIGHT, OUTTER SCREW BOLT CABLE RUBBER CABLE HOLDER CABLE HOLDER FENDER SCREW BOLT M5x15 DISC MOUNT SCREW BOLT M6x16

QTY. 1 1 1 4 4 1 2 2 2 2 1 1 1 1 4 5 2 2 1 4 1 2

PART NUMBER

SET 1 SET 1 SET 4 SET 4 SET 4 SET 4 SET 4 SET 6 SET 6 SET 5 SET 6 SET 6 / SET 5 989.13010 099.16004 099.15012 099.16003 099.15002 099.16007 099.13006

TORQUE

8Nm

4Nm

3Nm 8Nm

ITEM No. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

DESCRIPTION SLEEVE BOLT SPACER SCREW BOLT M6x25 SEAT CLAMP SCREW BOLT M5x20 SPACER, 19MM SCREW AXLE CHAIN PROTECTOR PIVOT AXLE BEARING, 24X15X5 SPACER, 15x19x2t SPACER, 15x27x2 PIVOT AXLE, 26MM PIVOT AXLE, M12 BEARING, 10x22x6 C-RING SHOCK BOLT SPACER, 10x17x6 WASHER, 12x18x3 PIVOT AXLE SPACER UPPER LINK

QTY. 1 2 2 1 1 1 1 1 2 4 2 4 2 2 2 2 2 2 2 1 1 1

PART NUMBER

TORQUE

SET 2 SET 4 SET 4 SET 7 SET 7 SET 4 SET 3 099.16005 SET 3 SET 1 SET 3 SET 3 SET 3 SET 3 SET 1 SET 3 SET 2 SET 2 SET 3 SET 9 SET 9

12Nm 10Nm 5Nm

11Nm

12Nm

8Nm


DETAIL 01

33

32

34

DETAIL 02

32 34 32

7

44

33 34

8

23

32

4

31 5

7 27 10

39

4

9

38 5

24

37

25

31

3

28 6

7

10

5

8

9 24

40

25 37 38 39

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 16

SHOCK HARDWARE ZERO 10

UPPER LINK HARDWARE KIT 23

LOWER LINK HARDWARE KIT 16

HANGER M065

PART NUMBER

DESCRIPTION

COMPONENTS

099.19108 099.18102 099.19006

SET 1: ZERO BEARING KIT 16 SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK HARDWARE KIT 23

099.16105

SET 4: LOWER LINK HARDWARE KIT 16

099.00050 099.00052 099.16106 099.16100

SET 5: HANGER M065 HANGER +10mm SET 6: DROPOUT KIT DUNE C GEOMETRY KIT DUNE C S/M

099.16101

GEOMETRY KIT DUNE C L

099.16102

GEOMETRY KIT DUNE C XL

099.15013 099.19007

SET 7: SEAT CLAMP + BOLT SET 9: REAR AXLE SET DUNE C 2019

BEARING 6901V-2RS (x4) / BEARING 6801V-2RS (x4) / BEARING 6900V-2RS (x2) 6802V-2RS (x4) SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) C-RING (x2) SPACER, 15x19x2t (x2) SPACER, 15x27x2 (x4) PIVOT AXLE (x2) PIVOT AXLE, 26MM (x2) PIVOT AXLE, M12 (x2) SCREW AXLE (x1) WASHER, 12x18x3 (x2) SPACER D23.5XD12x3mm (x2) / SPACER D20.5XD12x3mm (x2) / SPACER D10XD6X1mm (x2) / TAPER NUT 10.5mm (x2) / M6x25L-P-S SCREW BOLT (x2) / PIVOT AXLE M12X70.5mm (x2) / SPACER D16xD12x27 (x1) / SPACER D16xD12x19mm (x1) HANGER M065 + SCREW BOLT (x2) HANGER M065 (+10mm) + SCREW BOLT (x2) CS-CHIP, LEFT, OUTTER (x1) / HANGER M065 LEFT (x1) / CS-CHIP, RIGHT, OUTTER (x1) / SCREW BOLT (x4) HEADSET CUP, LOWER +/-1º (x1) / HEADSET CUP, UPPER, 110L +/-1º (x1) / HEADSET CUP, LOWER 0º (x1) / HEADSET CUP, UPPER 0º (x1) / CS-CHIP, LEFT, OUTTER +10mm (x1) / CS-CHIP, RIGHT, OUTTER +10mm (x1) / HANGER M065 LEFT +10mm (x1) / HANGER M065 +10mm (x1) / DISC MOUNT +10mm (x1) SCREW BOLT (x4) HEADSET CUP, LOWER +/-1º (x1) / HEADSET CUP, UPPER, 120L +/-1º (x1) / HEADSET CUP, LOWER 0º (x1) / HEADSET CUP, UPPER 0º (x1) / CS-CHIP, LEFT, OUTTER +10mm (x1) / CS-CHIP, RIGHT, OUTTER +10mm (x1) / HANGER M065 LEFT +10mm (x1) / HANGER M065 +10mm (x1) / DISC MOUNT +10mm (x1) / SCREW BOLT (x4) HEADSET CUP, LOWER +/-1º (x1) / HEADSET CUP, UPPER, 130L +/-1º (x1) / HEADSET CUP, LOWER 0º (x1) / HEADSET CUP, UPPER 0º (x1) / CS-CHIP, LEFT, OUTTER +10mm (x1) / CS-CHIP, RIGHT, OUTTER +10mm (x1) / HANGER M065 LEFT +10mm (x1) / HANGER M065 +10mm (x1) / DISC MOUNT +10mm (x1) / SCREW BOLT( x4) SEAT CLAMP (x1) / SCREW BOLT (x1) PIVOT AXLE (x1) / SPACER (x1)

163


DUNE Spare Parts 1

22

DETAIL 01

23 22

30

29

31

30 4

2

5

6

18 DETAIL 02

3

15

16

17

Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK UPPER LINK UPPER LINK UPPER LINK BEARING, 12X24X6 SPACER, 27MM SPACER, 3MM PIVOT AXLE, 70.5MM TAPER NUT SPACER SCREW BOLT SLEEVE BOLT HANGER HANGER NUT

QTY. 1 1 1 1 1 1 6 2 4 2 2 2 2 1 1 1

PART NUMBER

SET 1 SET4 SET4 SET4 SET4 SET4 SET4 SET2 SET5 099.16011

TORQUE

8Nm

4Nm

ITEM No. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

DESCRIPTION SCREW BOLT SHOCK FENDER BEARING, 24X15X5 SPACER, 15x19x2t SPACER, 15x27x2 PIVOT AXLE, 26MM PIVOT AXLE, M12 BEARING, 10x22x6 C-RING SHOCK BOLT SPACER, 10x17x6 PIVOT AXLE SCREW AXLE M6x50 WASHER, 12x18x3 FENDER BOLTS M5x10

QTY. 1 1 4 2 4 2 2 2 2 2 2 2 1 2 2

PART NUMBER

TORQUE

SET4 099.14000 SET1 SET3 SET3 SET3 SET3 SET1 SET3 SET2 SET2 SET3 SET3 SET3

3Nm

12Nm

12Nm 15Nm


DETAIL 02

DETAIL 01

20

19

21

19 21 19 21

19

20

9

14

28

7

7

8 7

26 9

25

7 24

28 27

13

24

12

11

10

25

13

12

11

10

26

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 17

SHOCK HARDWARE ZERO 10

UPPER LINK KIT 23

LOWER LINK KIT 18

HANGER M066

PART NUMBER

DESCRIPTION

COMPONENTS

099.19109 099.18102 099.19006

SET 1: ZERO BEARING KIT 17 SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK KIT 23

099.16113

SET 4: LOWER LINK KIT 18

099.00053 099.19103 099.19104 099.19105 112.90022

SET 5: HANGER M066 GEOMETRY KIT 110MM GEOMETRY KIT 120MM GEOMETRY KIT 130MM REAR AXLE

BEARING 6901V-2RS, 12X24X6 (x6) / BEARING 6900V-2RS, 10x22x6 (x2) / BEARING 6802V-2RS, 24X15X5 (x4) SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) C-RING (x2) SPACER, 15x19x2t (x2) SPACER, 15x27x2 (x4) PIVOT AXLE (x2) PIVOT AXLE, 26MM (x2) PIVOT AXLE, M12 (x2) SCREW AXLE (x1) WASHER, 12x18x3 (x2) SPACER D16xD12x27 (x2) / SPACER D23.5XD12x3mm (x4) / PIVOT AXLE M12X70.5mm (x2) / SPACER D10XD6X1mm (x2) / TAPER NUT 10.5mm (x2) M6x25L-P-S SCREW BOLT (x2) HANGER M066 (x1) / HANGER NUT (x1) / SCREW BOLT (x1) 0º CUPS +1º CUPS 110mm + ONOFF TITAN TAPPERED 0º CUPS +1º CUPS 120mm + ONOFF TITAN TAPPERED 0º CUPS +1º CUPS 130mm + ONOFF TITAN TAPPERED 12X148 P1.75 L180

165


FOXY CARBON 29 Spare Parts

1 6 7

5

9

23

24

23

DETAIL 01

2 17

31

19

DETAIL 02

36

9 8

33 32 34

35

34

Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE UPPER LINK LOWER LINK SEAT CLAMP SCREW BOLT M5x20 CABLE HOLDER CABLE HOLDER SCREW BOLT M5x15 BEARING, 10x22x6 BEARING, 24X15X5 SPACER, 15x19x2t BEARING, 28x15x7 SPACER, 15x22x31 C-RING C-RING SPACER, 15x22x3 SPACER, 15x27x2

QTY. 1 1 1 1 1 1 2 1 3 2 4 2 6 2 2 2 2 4

PART NUMBER

TORQUE

099.19002 5Nm 099.16004 099.15012 3Nm SET 1 SET 1 SET 3 SET 1 SET 4 SET 3 SET 3 SET 3 SET 4

ITEM No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

DESCRIPTION M8 THREAD AXLE LINK AXLE SHOCK BOLT SPACER, 10x17x6 PIVOT AXLE, 26MM PIVOT AXLE, M12 SPACER, 15x27x2 MAIN AXLE, 15x73L TAPER NUT SPACER SCREW BOLT M6x25 SLEEVE BOLT SHOCK FENDER HANGER HANGER NUT SCREW BOLT DISC MOUNT ADAPTOR CHAIN PROTECTOR

QTY. 1 2 2 2 2 2 4 2 2 2 2 1 1 1 1 2 1 1

PART NUMBER SET 3 SET 3 SET 2 SET 2 SET 3 SET 3 SET 3 SET 4 SET 4 SET 4 SET 4 SET 2 099.18002 SET 5 099.16011 099.13006 099.19001 099.19003

TORQUE 11Nm 8Nm 12Nm

12Nm

10Nm 12Nm

8Nm


DETAIL 02

DETAIL 01

25 11

18

12 13

11 25 3

11

15 13

12 11

27

20

25

26 27

21 13

16

15

10

4 14

28

30

13

29

26

18 27

22 28 10

27

29

16

29

21 20

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 14

SHOCK HARDWARE ZERO 10

UPPER LINK KIT 20

LOWER LINK KIT 20

HANGER M068 + NUT

PART NUMBER

DESCRIPTION

COMPONENTS

099.18100 099.18102 099.18103

SET 1: ZERO BEARING KIT 14 SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK KIT 20

099.18104

SET 4: LOWER LINK KIT 20

099.00055 099.19101

SET 5: HANGER M068 + NUT GEOMETRY CUPS +/-1° SIZE S

099.19102

GEOMETRY CUPS +/-1° SIZE M

099.19103

GEOMETRY CUPS +/-1° SIZE L

099.19105

GEOMETRY CUPS +/-1° SIZE XL

112.90022

REAR AXLE

BEARING, 28x15x7 (x6) / BEARING, 10x22x6 (x2) / BEARING, 24X15X5 (x4) SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) SPACER, 15x22x3 (x2) / LINK AXLE (x2) / M8 THREAD AXLE (x1) / C-RING (x2) / C-RING (x2) / SPACER, 15x19x2t (x2) / SPACER, 15x27x2 (x4) / PIVOT AXLE, 26MM (x2) / PIVOT AXLE, M12 (x2) SPACER, 15x22x31 (x2) / SPACER, 15x27x2 (x4) / MAIN AXLE, 15x73L (x2) / SPACER (x2) / TAPER NUT (x2) / SCREW BOLT (x2) HANGER M068 (x1) / HANGER NUT (x1) LOW CUP 1° SIZE S (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE M (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE L (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE XL (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) 12X148 P1.75 L180

167


FOXY CARBON 27’5 Spare Parts

1 38 35

37

36

26

25

25

DETAIL 01

2 14 16 42

41

40

39 DETAIL 02

36

32

9 10 34

33

34

8

Grease Sealant

32

7

Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LINK, LEFT LINK, RIGHT LINK BRIDGE LOWER LINK CS-CHIP, LEFT, OUTTER CS-CHIP, LEFT, INNER CS-CHIP, RIGHT, OUTTER CS-CHIP, RIGHT, INNER BEARING, 28x15x7 SPACER, 15x22x31 SPACER, 15x27x2 SPACER, 15x22x3 LINK AXLE M8 THREAD AXLE C-RING BEARING, 10x22x6 C-RING SPACER, 10x17x6 SHOCK BOLT

QTY. 1 1 1 1 1 1 1 1 1 1 6 2 4 2 2 1 2 2 2 2 2

PART NUMBER

TORQUE

STD DROPOUT KIT STD DROPOUT KIT STD DROPOUT KIT SET 5 SET 1 SET 4 SET 4 SET 3 SET 3 11Nm SET 3 SET 3 SET 1 SET 3 SET 2 SET 2 8Nm

ITEM No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

DESCRIPTION BEARING, 24X15X5 SPACER, 15x19x2t SPACER, 15x27x2 PIVOT AXLE, 26MM PIVOT AXLE, M12 MAIN AXLE, 15x73L SPACER TAPER NUT SCREW BOLT M6x25 SLEEVE BOLT SCREW BOLT DISC MOUNT ADAPTOR SCREW BOLT M6x16 CABLE HOLDER SCREW BOLT SEAT CLAMP SCREW BOLT M5x20 CABLE HOLDER CABLE RUBBER CHAIN PTOTECTOR SHOCK FENDER

QTY. 4 2 4 2 2 2 2 2 2 1 4 1 2 2 3 1 1 1 4 1 1

PART NUMBER SET 1 SET 3 SET 3 SET 3 SET 3 SET 4 SET 4 SET 4 SET 4 SET 2 SET 5 099.18004 099.13006 099.16004

TORQUE

12Nm 12Nm

10Nm 12Nm 4Nm 8Nm 3Nm

099.18001 099.12132 099.15012 989.13010 099.18003 099.18002

5Nm


DETAIL 01

DETAIL 02

24 22 23

31

22 24 23

13

17

3

22

11

11

22

5

24

15

27 29 6

21 11

28

19 18

30

17

12 13

20

11

4

27

28

18 19

30

29

21 15

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 14

SHOCK HARDWARE ZERO 10

UPPER LINK KIT 20

LOWER LINK KIT 20

HANGER M071

PART NUMBER

DESCRIPTION

COMPONENTS

099.18100 099.18102 099.18103

SET 1: ZERO BEARING KIT 14 SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK KIT 20

099.18104

SET 4: LOWER LINK KIT 20

099.00058 099.00059 099.18101

SET 5: HANGER M071 M071 HANGER +10MM STANDARD DROPOUT KIT FOXY 18

099.18105

GEOMETRY KIT FOXY 18 S

099.18106

GEOMETRY KIT FOXY 18 M

099.18107

GEOMETRY KIT FOXY 18 L

099.18108

GEOMETRY KIT FOXY 18 XL

112.90022

REAR AXLE

BEARING, 28x15x7 (x6) / BEARING, 10x22x6 (x2) / BEARING, 24X15X5 (x4) SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) SPACER, 15x22x3 (x2) / LINK AXLE (x2) / M8 THREAD AXLE (x1) / C-RING (x2) / C-RING (x2) / SPACER, 15x19x2t (x2) / SPACER, 15x27x2 (x4) / PIVOT AXLE, 26MM (x2) / PIVOT AXLE, M12 (x2) SPACER, 15x22x31 (x2) / SPACER, 15x27x2 (x4) / MAIN AXLE, 15x73L (x2) / SPACER (x2) / TAPER NUT (x2) / SCREW BOLT (x2) CS-CHIP, RIGHT, INNER (x1) / SCREW BOLT (x2) CS-CHIP, RIGHT, INNER + 10MM (x1) / SCREW BOLT (x2) CS-CHIP, LEFT, OUTTER (x1) / CS-CHIP, LEFT, INNER (x1) / CS-CHIP, RIGHT, OUTTER (x1) / CS-CHIP, RIGHT, INNER (x1) / SCREW BOLT (x4) CS-CHIP, LEFT, INNER + 10MM (x1) / CS-CHIP, RIGHT, INNER + 10MM (x1) / LOW CUP 0º (x1) / TOP CUP 0º (x1) / LOW CUP 1º (x1) / TOP CUP 1º (SIZE SMALL) (x1) CS-CHIP, LEFT, INNER + 10MM (x1) / CS-CHIP, RIGHT, INNER + 10MM (x1) / LOW CUP 0º (x1) / TOP CUP 0º (x1) / LOW CUP 1º (x1) / TOP CUP 1º (SIZE MEDIUM) (x1) CS-CHIP, LEFT, INNER + 10MM (x1) / CS-CHIP, RIGHT, INNER + 10MM (x1) / LOW CUP 0º (x1) / TOP CUP 0º (x1) / LOW CUP 1º (x1) / TOP CUP 1º (SIZE LARGE) (x1) CS-CHIP, LEFT, INNER + 10MM (x1) / CS-CHIP, RIGHT, INNER + 10MM (x1) / LOW CUP 0º (x1) / TOP CUP 0º (x1) / LOW CUP 1º (x1) / TOP CUP 1º (SIZE XLARGE) (x1) 12X148 P1.75 L180

169


FOXY 29 / 27’5 Spare Parts

1

30 29

19 20

DETAIL 01

19

12

14 12

2

3

DETAIL 02

4

25

Grease

26

Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK UPPER LINK BEARING, 28x15x7 SPACER, 15x22x31 SPACER, 15x27x2 MAIN AXLE, 15x73L TAPER NUT SPACER SCREW BOLT M6x25 SPACER, 15x22x3 C-RING M8 THREAD AXLE LINK AXLE

QTY. 1 1 1 1 6 2 4 2 2 2 2 2 2 1 2

PART NUMBER

SET 1 SET 4 SET 4 SET 4 SET 4 SET 4 SET 4 SET 3 SET 3 SET 3 SET 3

TORQUE

12Nm

10Nm

11Nm

ITEM No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

DESCRIPTION BEARING, 24X15X5 SPACER, 15x19x2t SPACER, 15x27x2 PIVOT AXLE, 26MM PIVOT AXLE, M12 BEARING, 10x22x6 C-RING SHOCK BOLT SPACER, 10x17x6 HANGER HANGER NUT SLEEVE BOLT CABLE ADAPTOR CABLE GUIDE SCREW BOLT M3x10

QTY. 4 2 4 2 2 2 2 2 2 1 1 1 1 3 3

PART NUMBER SET 1 SET 3 SET 3 SET 3 SET 3 SET 1 SET 3 SET 2 SET 2 SET 5 099.16011 SET 2 SET 6 SET 6

TORQUE

12Nm

8Nm

12Nm

3Nm


18

DETAIL 01

DETAIL 02

16 17 16

5

7

28 3

16 17

13 5

16

15

18

5

21

6

9

22

13

3

8

23

27

5

10 11

24

8

7 9 10 11

21 22 23 15

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 14

SHOCK HARDWARE ZERO 10

UPPER LINK KIT 20

LOWER LINK KIT 20

HANGER M068 + NUT

PART NUMBER

DESCRIPTION

COMPONENTS

099.18100 099.18102 099.18103

SET 1: ZERO BEARING KIT 14 SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK KIT 20

099.18104

SET 4: LOWER LINK KIT 20

099.00055 099.19010 099.19103

SET 5: HANGER M068 + NUT SET 6: CABLE GUIDE KIT 3 GEO KIT FOXY 27.5 - HEADSET CUPS +/- 1° SIZE S GEO KIT FOXY 27.5 - HEADSET CUPS +/- 1° SIZE M GEO KIT FOXY 27.5 - HEADSET CUPS +/- 1° SIZE L GEO KIT FOXY 27.5 -HEADSET CUPS +/- 1° SIZE XL GEO KIT FOXY 29 - HEADSET CUPS +/- 1° SIZE S GEO KIT FOXY 29 - HEADSET CUPS +/- 1° SIZE M GEO KIT FOXY 29 - HEADSET CUPS +/- 1° SIZE L GEO KIT FOXY 29 - HEADSET CUPS +/- 1° SIZE XL REAR AXLE

BEARING 28x15x7 (x6) / BEARING, 10x22x6 (x2) / BEARING, 24X15X5 (x4) SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) SPACER, 15x22x3 (x2) / LINK AXLE (x2) / M8 THREAD AXLE (x1) / C-RING (x2) / C-RING (x2) / SPACER, 15x19x2t (x2) / SPACER, 15x27x2 (x4) / PIVOT AXLE, 26MM (x2) / PIVOT AXLE, M12 (x2) SPACER, 15x22x31 (x2) / SPACER, 15x27x2 (x4) / MAIN AXLE, 15x73L (x2) / SPACER (x2) / TAPER NUT (x2) / SCREW BOLT (x2) HANGER M068 (x1) / HANGER NUT (x1) CABLE GUIDE (x3) / SCREW BOLT (x3) LOW CUP 1° SIZE S (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE M (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE L (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE XL (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE S (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE M (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE L (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) LOW CUP 1° SIZE XL (x1) / LOW CUP 1° (x1) / TOP CUP 0° (x1) / LOW CUP 0° (x1) / HEADSET ONOFF TITAN TAPPERED (x1) 12X148 P1.75 L180

099.19104 099.19106 099.19107 099.19101 099.19102 099.19103 099.19105 112.90022

171


PODIUM CARBON Spare Parts 1

12

13

12

13

10

7 3 8

9

6

11 5 2 4 Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13

DESCRIPTION STEM, 75mm HANGER M068 CABLE GUIDE, DOUBLE HANGER NUT CABLE GUIDE CABLE RUBBER SCREW BOLT M3x10 SEAT CLAMP, 31,8mm SCREW BOLT RUBBER PROTECTOR STEM IST METALLIC CHAINSTAY PROTECTOR STEM-HANDLEBAR SCREW STEM-FORK SCREW

QTY. 1 1 2 1 1 1 2 1 1 1 1 4 2

PART NUMBER SET 1 SET 2 099.16011 099.13038 989.13010 SET 2 SET 3 SET 3 099.17012 099.17013

TORQUE

4Nm

3Nm 5Nm

5Nm 5Nm


STEMS

SET 1

SET 2

SET 3

STEM 60mm - 115mm

HANGER M068

CABLE GUIDE KIT

SEAT CLAMP

PART NUMBER

DESCRIPTION

COMPONENTS

099.19016 099.19017 099.19018 099.19014 099.19015 099.00055 099.17106 099.17001 099.17002 099.17003 112.90022

STEM PODIUM 19, 60mm STEM PODIUM 19, 75mm STEM PODIUM 19, 90mm STEM PODIUM 19, 105mm STEM PODIUM 19, 115mm SET 1: HANGER M068 SET 2: CABLE GUIDE KIT SET 3: SEAT CLAMP CHAINSTAY ADHESIVE PROTECTOR DOWN TUBE ADHESIVE PROTECTOR REAR AXLE

STEM + STEM CLAMP + HARDWARE (x1) STEM + STEM CLAMP + HARDWARE (x1) STEM + STEM CLAMP + HARDWARE (x1) STEM + STEM CLAMP + HARDWARE (x1) STEM + STEM CLAMP + HARDWARE (x1) HANGER M068 (x1) / HANGER NUT (x1) CABLE GUIDE, DOUBLE (x1) / CABLE GUIDE, SIMPLE (x1) / CABLE GUIDE, COVER (x1) / SCREW BOLT, M3x10L-M-S (x3) SEAT CLAMP 31,8mm (x1) / M5x20L-P SCREW BOLT (x2)

12X148 P1.75 L180

173


CHRONO CARBON Spare Parts 6 5 1

5

SET 1

6

HANGER M068

8 4

10

7

SET 2 CABLE GUIDE KIT 3

3

2

9

Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10

DESCRIPTION FRAME HANGER HANGER NUT DISC ADAPTOR CABLE GUIDE SCREW BOLT M3x10 WASHER WASHER SCREW BOLT M5x35 WASHER

QTY. 1 1 1 1 3 3 2 2 2 2

PART NUMBER

TORQUE

SET 3 DISC ADAPTOR KIT 2

SET 1 099.16011 SET 3 SET 2 SET 2

4Nm

3Nm

SET 3 SET 3

PART NUMBER

DESCRIPTION

COMPONENTS

099.00055 099.19010 111.19080 099.17005 112.90022

SET 1: HANGER M068 SET 2: CABLE GUIDE KIT 3 SET 3: DISC ADAPTOR KIT 2 CHAINSTAY ADHESIVE PROTECTOR REAR AXLE

HANGER M068 (x1) / HANGER NUT (x1) CABLE GUIDE (x3) / SCREW BOLT (x3) DISC ADAPTOR KIT 2 (x1) / SCREW BOLT (x2) / WASHER (x2) 12X148 P1.75 L180


CHRONO Spare Parts

7

1

7

5

4

3

2

6

Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7

DESCRIPTION FRAME HANGER HANGER NUT DISC ADAPTOR SPACER SCREW BOLT M5x35 CABLE RUBBER

QTY. 1 1 1 1 2 2 2

PART NUMBER SET 1 099.16011 SET 2 SET 2 SET 2 989.13010

TORQUE

SET 1

SET 2

HANGER M068

DISC ADAPTOR KIT 2

4Nm

8Nm

PART NUMBER

DESCRIPTION

COMPONENTS

099.00055 111.19080 099.17005 112.90022

SET 1: HANGER M068 SET 2: DISC ADAPTOR KIT 2 CHAINSTAY ADHESIVE PROTECTOR REAR AXLE

HANGER M068 (x1) / HANGER NUT (x1) DISC ADAPTOR KIT 2 (x1) / SCREW BOLT (x2) / WASHER (x2) 12X148 P1.75 L180

175


FACTOR 26 / 24 Spare Parts

1

17

DETAIL 01

17 2

DETAIL 02

17

Grease

8

Sealant

16

Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9

DESCRIPTION FRON TRIANGLE REAR TRIANGLE LOWER LINK “UPPER LINK, LEFT” “UPPER LINK, RIGHT” SPACER SLEEVE BOLT HANGER BEARING

QTY. 1 1 1 1 1 1 2 1 8

PART NUMBER

SET 3 SET 2 SET 5 SET 1

TORQUE

12Nm

ITEM No. 10 11 12 13 14 15 16 17

DESCRIPTION SPACER AXLE NUT PIVOT AXLE PIVOT AXLE AXLE NUT PIVOT AXLE SCREW BOLT M5x10 CABLE GUIDE

QTY. 1 1 1 2 4 4 1 3

PART NUMBER SET 4 SET 4 SET 4 SET 3 SET 3/4 SET 3/4 SET 5

TORQUE

11Nm 12Nm 11Nm 3Nm 3Nm


DETAIL 02

DETAIL 01

5

4

15 14

15

14

14

3 9

13

9 14

9

11

6

7

9 10 12

7

9

13

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 2

SHOCK HARDWARE ZERO 1

UPPER LINK KIT 4

LOWER LINK KIT 1

HANGER M048

PART NUMBER

DESCRIPTION

COMPONENTS

099.12017 099.12002 099.12018 099.12006

SET 1: ZERO BEARING KIT 2 SET 2: SHOCK HARDWARE KIT 1 SET 3: UPPER LINK KIT 4 SET 4: LOWER LINK KIT 1

099.00025

SET 5: HANGER M048

BEARING 6900-RS (x8) BOLT M10x36 (x2) M10x21.5 (x2) / AXLE NUT M10x5.75 (x2) / PIVOT AXLE M10x15 (x2) PIVOT AXLE M10x63 / PIVOT AXLE M10x15 (x2) / SPACER D14x35 / AXLE NUT M10x8.85 / AXLE NUT M10x5.75 (x2) M048 HANGER / M5x10L-M SCREW BOLT

177


CRUSHER CARBON Spare Parts 1

32

30

29

32

28

31 34

20 19

33 20

40

DETAIL 01

2

47 41 39 DETAIL 02

48

7

33

6

34

46

8

46

27

9

35

26 25

Grease

42

Sealant

38

37

38

Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK UPPER LINK LEFT UPPER LINK RIGHT BATTERY COVER, MAIN BATTERY COVER, SMALL MOTOR COVER, LEFT CHAIN PROTECTOR BEARING, 28x15x7 SPACER, 15x22x31 MAIN AXLE TAPER NUT SPACER SCREW BOLT M6x25 SPACER, 15x27x2 C-RING SPACER, 15x27x4 PIVOT AXLE, 26MM PIVOT AXLE, M12 LINK AXLE M8 THREAD AXLE BEARING, 10x22x6 C-RING

QTY. 1 1 1 1 1 1 1 1 1 8 2 2 2 2 2 4 4 2 2 2 2 1 2 2

PART NUMBER

099.18008 099.18009 099.18010 099.18006 SET1 SET4 SET4 SET4 SET4 SET4 SET4 SET3 SET3 SET3 SET3 SET3 SET3 SET1 SET3

TORQUE

12Nm

10Nm

12Nm 11Nm

ITEM No. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

DESCRIPTION HANGER HANGER NUT SCREW BOLT M5x10 SEAT CLAMP SCREW BOLT M5x20 CABLE GUIDE, DOUBLE/Di2 CABLE GUIDE, DOUBLE SCREW BOLT M3x10 SCREW BOLT M5x15 SCREW BOLT M5x15 MOTOR BOLT SLEEVE BOLT DISC MOUNT SCREW BOLT CHAIN GUIDE ADAPTOR SCREW BOLT M5x10 CHAIN GUIDE CABLE RUBBER SPACER, 15x22x3 SPACER, 10x17x6 SHOCK BOLT SCREW BOLT M3x5 SCREW BOLT M5x25 CHAIN PROTECTOR, SMALL

QTY. 1 1 1 1 2 1 1 2 2 4 6 1 1 2 1 1 1 1 2 2 2 3 1 1

PART NUMBER

TORQUE

SET5 099.16011 SET5 099.18005

4Nm 4Nm 5Nm

099.18011 099.18011

SET2 099.18012

3Nm 5Nm 5Nm 18-20Nm 12Nm 8Nm

SET6 SET6 SET6 989.13038 SET3 SET2 SET2

099.18014

5Nm

8Nm 4Nm 5Nm


DETAIL 01

18

17 10

21 22 17

10 18

10

17 43

17

10

24

21

45

23

4 44

24

5

23

45

SET 1

SET 2

ZERO BEARING KIT 15 (ENDURO BEARINGS)

SHOCK HARDWARE ZERO 10

DETAIL 02

36

16 SET 3

SET 4

UPPER LINK KIT 21

LOWER LINK KIT 21

10 3

12 11

13 14

10 16 12

15

SET 5

SET 6

HANGER M066

CHAIN GUIDE KIT

13 14 15

PART NUMBER

DESCRIPTION

COMPONENTS

099.18109

ENDURO BEARING, 28x15x7 (x8) / ENDURO BEARING, 10x22x6 (x2)

099.18102 099.18110

SET 1: ZERO BEARING KIT 15 (ENDURO BEARINGS) SET 2: SHOCK HARDWARE ZERO 10 SET 3: UPPER LINK KIT 21

099.18111

SET 4: LOWER LINK KIT 21

099.00053 099.18007 112.90022

SET 5: HANGER M066 SET 6: CHAIN GUIDE KIT REAR AXLE

SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) C-RING (x4) / SPACER, 15x27x4 (x2) / MPIVOT AXLE, 26MM (x2) / PIVOT AXLE, M12 (x2) / LINK AXLE (x2) / M8 THREAD AXLE (x1) / C-RING (x2) / SPACER, 15x22x3 (x2) SPACER, 15x22x31 (x2) / MAIN AXLE (x2) / TAPER NUT (x2) / SPACER (x2) / SCREW BOLT (x2) / SPACER, 15x27x2 (x4) HANGER (x1), HANGER NUT (x1) / SCREW BOLT (x1) CHAIN GUIDE ADAPTOR (x1) / SCREW BOLT (x1) / CHAIN GUIDE (x1) / SCREW BOLT (x1) 12X148 P1.75 L180

179


CRAFTY + / LEVEL Spare Parts

1 30

39 31

19 18

DETAIL 01

2

14 37 23 39

DETAIL 02

34 29 35

Grease

32

36

33

35

38

28

Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LINK, LEFT LINK, RIGHT LINK BRIDGE LOWER LINK SPACER, 15x22x31 BEARING, 28x15x7 SPACER, 15x27x2 MAIN AXLE TAPER NUT SPACER SCREW BOLT M6X25 SPACER, 15x22x3 BEARING, 24X15X5 SPACER, 15x19x2t SPACER, 15x27x2 PIVOT AXLE, 26MM PIVOT AXLE, M12 BEARING, 10x22x6

QTY. 1 1 1 1 1 1 2 6 4 2 2 2 2 2 4 2 4 2 2 2

PART NUMBER

SET4 SET1 SET4 SET4 SET4 SET4 SET4 SET3 SET1 SET3 SET3 SET3 SET3 SET1

TORQUE

12Nm

10Nm

12Nm

ITEM No. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

DESCRIPTION C-RING C-RING M8 THREAD AXLE LINK AXLE SPACER, 10x17x6 SHOCK BOLT SLEEVE BOLT HANGER HANGER NUT CABLE ADAPTOR BATTERY COVER MOTOR COVER, LOWER MOTOR COVER, LEFT SCREW BOLT M4X10 SCREW BOLT M3X8 SCREW BOLT M4X10 SCREW BOLT M8X20 SCREW BOLT M4X15 BOLT COVER

QTY. 2 2 1 2 2 2 1 1 1 1 1 1 1 2 4 1 5 2 2

PART NUMBER SET3 SET3 SET3 SET3 SET2 SET2 SET2 SET5 099.16011

TORQUE

11Nm 8Nm 12Nm 4Nm

099.18016 099.18017 099.18018 4Nm 3Nm 3Nm 8Nm 4Nm 099.18019


DETAIL 02

DETAIL 01

17 15 16 15

27

17 15

3

16 17

6

9

22 8

15 5

24 8

26

8

21 20

22

7

25 13

4

12

20

11

10

8 9

10

21 24

11

26

12 13

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 14 (ENDURO BEARINGS)

SHOCK HARDWARE ZERO 10

UPPER LINK KIT 20

LOWER LINK KIT 21

HANGER M067

PART NUMBER

DESCRIPTION

COMPONENTS

099.18100

ENDURO BEARING, 28x15x7 (x6) / ENDURO BEARING, 10x22x6 (x2) / ENDURO BEARING, 24X15X5 (x4)

099.18102 099.18103

SET 1: ZERO BEARING KIT 14 (ENDURO BEARINGS) SET 2: SHOCK HARDWARE KIT 10 SET 3: UPPER LINK KIT 20

099.18111

SET 4: LOWER LINK KIT 21

099.00054 099.19019 112.90022

SET 5: HANGER M067 LEVEL SHOCK SPACER REAR AXLE

SPACER, 10x17x6 (x2) / SHOCK BOLT (x2) / SLEEVE BOLT (x1) SPACER, 15x22x3 (x2) / LINK AXLE (x2) / M8 THREAD AXLE (x1) / C-RING (x2) / C-RING (x2) / SPACER, 15x19x2t (x2) / SPACER, 15x27x2 (x4) / PIVOT AXLE, 26MM (x2) / PIVOT AXLE, M12 (x2) SPACER, 15x22x31 (x2) / MAIN AXLE (x2) / TAPER NUT (x2) / SPACER (x2) / SCREW BOLT (x2) / SPACER, 15x27x2 (x4) HANGER (x1), HANGER NUT (x1) 12X148 P1.75 L180

181


CHASER + Spare Parts

1

30

DETAIL 01

4/5 32

2 DETAIL 02

28

29 3

20

18

19

Grease Sealant Grease + Sealant Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

DESCRIPTION FRONT TRIANGLE REAR TRIANGLE LOWER LINK UPPER LINK, LEFT UPPER LINK, RIGHT BEARING, 12X24X6 SPACER, 27MM SPACER, 3MM PIVOT AXLE, 70.5MM TAPER NUT SPACER SCREW BOLT M6X25 BEARING, 10x26x8 BEARING, 10x22x6 PIVOT AXLE AXLE NUT

QTY. 1 1 1 1 1 4 2 4 2 2 2 2 2 2 2 2

PART NUMBER

SET 1 SET 4 SET 4 SET 4 SET 4 SET 4 SET 4 SET 1 SET 1 SET 3 SET 3

TORQUE

8 Nm

10 Nm

11 Nm

ITEM No. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

DESCRIPTION SLEEVE BOLT HANGER HANGER NUT MOTOR COVER SCREW BOLT M4X10 SCREW BOLT M4X15 PIVOT AXLE BEARING CAP SCREW BOLT SPACER CABLE RUBBER RIGHT SIDE COVER SCREW BOLT M5X15 BATTERY COVER CABLE ADAPTOR BOLT COVER

QTY. 2 1 1 1 2 2 2 2 2 2 3 1 3 1 1 2

PART NUMBER

TORQUE

SET 2 SET 5 099.16011 099.16013

12Nm

SET 3 SET 3 SET 3

5 Nm 3 Nm 4 Nm 10 Nm

989.13010 099.16017 3 Nm 099.18016 099.18019


DETAIL 02

DETAIL 01

8 17 21

14 17 16

15

16

6 9

9

10

10

11 25

12

23

23

7 6

8

13

22

11 12

13

24

24

SET 1

SET 2

SET 3

SET 4

SET 5

ZERO BEARING KIT 12

SHOCK HARDWARE ZERO 1

UPPER LINK KIT 18

LOWER LINK KIT 18

HANGER M067

PART NUMBER

DESCRIPTION

COMPONENTS

099.16111 099.12002 099.16112 099.16113

SET 1: ZERO BEARING KIT 12 SET 2: SHOCK HARDWARE ZERO 1 SET 3: UPPER LINK KIT 18 SET 4: LOWER LINK KIT 18

099.00054 112.90022

SET 5: HANGER M067 REAR AXLE

BEARING, 12X24X6 (x4) / BEARING, 10x26x8 (x2) / BEARING, 10x22x6 (x2) SLEEVE BOLT (x2) PIVOT AXLE (x2) / AXLE NUT (x2) / PIVOT AXLE (x2) / BEARING CAP (x2) / SCREW BOLT (x2) SPACER D16xD12x27 (x2) / SPACER D23.5XD12x3mm (x4) / PIVOT AXLE M12X70.5mm (x2) / SPACER D10XD6X1mm (x2) / TAPER NUT 10.5mm (x2) M6x25L-P-S SCREW BOLT (x2) HANGER (x1), HANGER NUT (x1) 12X148 P1.75 L180

183


PRIME + / 29 Spare Parts

1

8 5

7

8 13

10

12 2

3

4 6

Grease Sealant Grease + Sealant

11

Apply grease to the shaft, and sealant to the threads

ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13

DESCRIPTION FRAME HANGER HANGER NUT SCREW BOLT BATTERY COVER MOTOR COVER RIGHT SIDE COVER BOLT COVER CABLE ADAPTOR SCREW BOLT M4x10 SCREW BOLT M4x15 SCREW BOLT M5x15 CABLE COVER

QTY. 1 1 1 1 1 1 1 2 1 2 2 3 1

PART NUMBER SET 1 099.16011 SET 1 099.18016 099.16013 099.16017 099.18019

TORQUE

SET 1 HANGER M066

3Nm

3Nm 4Nm 3Nm 099.16014

PART NUMBER

DESCRIPTION

COMPONENTS

099.00053 112.90022

SET 1: HANGER M066 REAR AXLE

HANGER M066 (x1) / HANGER NUT (x1) /SCREW BOLT (x1) 12X148 P1.75 L180


C

R

E

D

I

T

S

Outdoor photos Sebas Romero: cover, index, technology, super enduro, all mountain - enduro, xc pro, kids, e-mtb all mountain, e-mtb trail & spare parts Nathan Hughes: downhill Matthew DeLorme: xc race Iván Marruecos: xc sport Product Photos Iván Marruecos Concept and Design Mondraker Graphic Design Department Riders Markus Pekoll, Laurie Greenland, Miki Noguera, Carlos Coloma, Fer López de Sagredo, Alexis Vázquez, Unai Gómez, David Acedo & Mike Jones

All information and pictures on this catalogue is provided for information purposes only and does not constitute a legal contract between Mondraker and any person or entity. Specifications, geometries or any other technical information published is subject to change without prior notice. © ® All trademarks and models are property of Blue Factory Team, S.L.U. and are protected by current laws and applicable international agreements.

185




_EN


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.