SmartONE Kit
User Manual
Thank you for choosing BroadLink DNA series products
Packing List
Please confirm the items are in good conditions as below
SOS
SmartONE x1
Wireless Key Fob Remote x1
Wireless Door Sensor x1
Wireless Motion Sensor x1
Bracket base x1
Screw x2 Bolt x4
AA Battery x3
Screw x2 Bolt x4
Guide Card x1
Infrared Installation Accessry
Wireless Door Sensor Installation Accessory 3M Adhesive Lable x2
2
SmartONE
Wi-Fi LED
Status LED Ventilation Holes
Reset Button
Buit-in Buzzer Alarm
* Device Reset - Long press the reset button for more than 6 seconds until the Wi-Fi LED is blinking rapidly
3
e-Control APP User Guide
Step1 Download the e-Control APP
PC/Web
download APP
Forum
e-Control
Scan QR code to download
Page1
A: Scan QR code from the packing box or the user manual to download and install the APP. 4
B: Visit www.ibroadlink.com using your mobile browser and tap Download APP as shown on Page1 above.
Step2 Configure the Device
Configuration Mode Ensure the Wi-Fi LED is blinking rapidly about 5-6 times per sec
Plug into the power outlet
SmartONE
Connect to Wi-Fi Wi-Fi Router
Smart Phone
Open e-Control APP e-Control 5
Step3 Configure the Device
Enter the Wi-Fi user name Enter the password
* If the configuration is failed,please refer to Page14 6
Step4 Start to experience Function Tap to view sensor alarm history
Alarm Status Quick Setup
Available Sensors
Sensor Status
Tap to view the history info/ setup sensor
Device Control Panel 7
e-Control APP
Add Sensor
①
Back
Scan Barcode
②
Sensor status
② Align the barcode on sensor in scanning box. The sensor can be added automatically.
Enter serial number
Add sensor as shown on the page above
Add
Please scan QR code, or manually enter serial number 8
Back
Scan Barcode
Next
vendor name ******company Sensor type
Back
Sensor definition
Save
Wireless Door Sensor Sensor ID
088888880
Part-arm
Enable by default
Name
Door sensor
Type
Door sensor
Zone
Living room
Tap to change senor name Tap to select the location
Door
Attach to
Tap to select the installation site
Sensor Info Page
Sensor Settings
9
e-Control APP
IFTTT Style Interaction Users can DIY various ways for smart home control. Devices will operate automatically after setting when the conditions are triggered. IFTTT simply enables you to enjoy the real unattended smart home such as the situation as “Turn on the warm lights once the door of your house is opened”.
→
→
If Living room - [Door sensor](Open), then [Smart plug] - Desk Lamp (On) ( ) is the condition to be triggered or action to be performed. [ ] is the BroadLink brand or Broadink DNA products.
When adding IFTTT, make sure all the sensors added to WLAN should have Internet access, otherwise the IFTTT scene cannot be uploaded to the server and loaded from the sensor.
10
e-Control APP
IFTTT Settings ①
② IFTTT
Back
Save
IF
Tap to IFTTT setup Tap to setup
Add new Tap to IFTTT
Task list Sensor& condition
Timer
Settings
Settings
③
Motion Sensor No Person Key Fob SOS
SmartPlug zj ON
Delete
Delete IFTTT
min
Tap to setup
Then Action
Alarm Settings Play button 2
Enter IFTTT page as shown above, and setup according to the APP tip, then tap save. (SmartONE supports max 16 groups of IFTTT with 6 conditions and 8 actions for each group)
11
e-Control APP
General Settings
①
Home
General settings
②
Edit device Lock device
Back
Alarm setting
Create shortcut
Delay time settings
Lock device
Set the alarm duration
Alarm setting Firmware update
③
Door Sensor
Save
Delay time settings Select sensor
Motion Sensor
Edit Device Tap to change the icon and name Lock Device Prevent your devices from being detected and operated by other smartphone users in the same WLAN.
12
Delay time settings Setup the delay time for “Full/Part Arm”. Select the sensor Select the sensors enabled in“Part Arm”mode.
control
Function Scene
Settings door Sensor
Shortcut
Door opened
Full-Arm Long Press
Part Arm What action you want to be performed by this shortcut?
Disarm
Delete Create shortcut
Cancel
Share configuration
Tap to create the shortcut on your desktop
Cancel
Full-Arm Default the situation in which all the sensors will be involved in alarm. Part-Arm Select sensors needed to be involved in alarm on the alarm setting Page (P12). ( Wireless key fob remote can simply setup without Smartphone )
13
Enter Control page for more operations
Search/Edit Device
Back
Configuration Failed
IFTTT Back
RM
IFTTT
RM RM RM
A1 A1
SmartONE
长 按
P2
SmartONE
Reset device
Press the reset button more than 6 seconds until the Wi-Fi LED is blinking rapidly
Edit name Delete Cance
New device New device added； O f f l i n e The device is offline, unable to control, please check your network connection
14
If APP shows the page 2 as above when Wi-Fi light keep flashing slowly, and device configuration failed, please reset device and reconfigure (Repeat Step 3). If the configuration shows other problems， please contact customer service staff for help.
S1
A1
SP 2
e - Control
IPC
RM Pro
More Smart Devices