9 minute read
Digital flow meters
Code: 01001202
Advertisement
Variants
Code Description
01001202-01 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 1.000 liters 01001202-02 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 2.000 liters 01001202-03 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 3.000 liters 01001202-04 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 4.000 liters 01001202-05 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 5.000 liters 01001202-06 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 6.000 liters 01001202-07 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 7.000 liters 01001202-08 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 8.000 liters<br />
Clear indicating of filter status The DigiFlow 5000V incorporate an advanced microprocessor circuit and precision flow sensor to accurately monitor filter life. The double-color LED conveniently indicates the status of filter. A built-in audio device generates an alert alarm when the filter life reaches its end. No external power needed. The DigiFlow 5000V can be used with all kinds of under-sink water filters, including installed ones. The DigiFlow 5000V is powered by two AAA alkaline batteries which generally last for more than two years. A built-in semiconductor memory device automatically stores the last status when battery power runs out.
16 pre-set monitoring capacity options : 1000, 2000, 3000, 4000, 5000, 6000, 7000 and 8000 liters.
Remaining capacity indicating : Green light blinks 10 times – 100% capacity remaining 9 times – 90% capacity remaining ………………………………… 1 time – 10% capacity remaining
End of life alert : Red light blinks all the times and an addible alarm is generated when the remaining capacity is 0. An audible alarm.
Measuring flow capacity of filter The DigiFlow 6000R is a flow totalizer with LCD display. It displays the accumulated volume flowing through. Both of the gallon and liter models are available. Accumulated volume displayed up to 99999 gallons and 99999 liters.
Monitoring up to five filter volume capacity
Besides the totalization function, the DigiFlow 6000R is programmable to monitor up to five filters in volume capacity from 100 to 9900 gallons (gallon model) or 500 to 99500 liters (liter model). The LCD of the DigiFlow 6000R blinks the filter number and generates an audible alert when the monitoring volume capacity of the specific filter reaches the end. The DigiFlow 6000R comes with a 3/ 8” NPT female thread, which is adapted to most of the fittings to connect with filters.
No external power needed. The DigiFlow 6000R is operated by two AAA alkaline batteries which power lasts more than one year . The last status data will be automatically memorized when the battery power is off. The DigiFlow 6000R is applied for water filters, water dispensers and coolers.
Install Batteries Slide off the cover case of the battery room, and put into 2 AAA batteries. Then slide the cover case back.
Connecting Fitting The specification of the DigiFlow 6000R connectors is 3/8” MNPT female. You could use any 3/8” MNPT male connectors.
Setting Filter Capacity Keep pressing DISPLAY button, then press RESET button and release both of the buttons. The DigiFlow 6000R will go into setting procedure. The digit will blink “FLT 1” four times, then blink “ OFF” to notice you that the setting procedure is on. Press DISPLAY button to choose the capacity value. The sequence is OFF - 0 – 100 – 200 – 300 …… 19800 – 19900 – OFF – 0 –100 (gallon model) and OFF - 0 –500 – 1000 --- 99500 – OFF – 0 – 500 (Liter model). Then press RESET button to save the filter capacity value. * If the setting value is “OFF”, the monitor function of the dedicated filter will be disable.
Operating The DigiFlow 6000R will be automatically turn on when there is water flowing through the sensor. It will automatically turn off in 10 seconds when there is no water flowing. The DigiFlow 6000R display the total flowing volume.
Check Filter Remaining Capacity Press DISPLAY button will display the remaining capacity of each filter. The DigiFlow 6000R will blink the dedicated filter twice, then blink the remaining capacity twice. For example, “FLT 1”, then“ 988 ltr”, then “ FLT 2” …….. After display all remaining capacity of each filter, the DigiFlow 6000R goes back to display the
End o Life Alert When there is any filter remaining capacity reaches 0 gallon (liter), the buzzer will beep twice and the DigiFlow 6000R will blink the dedicated filter, for example, like “ FLT 2” to notice user that the 2nd filter cartridge is in its end of life, and out of function. In the alert status, user press DISPLAY button is not able to check the remaining capacity of each filter, but to display the total flowing volume. After change the dedicated filter cartridge, press RESET button. The remaining capacity of the dedicated filter cartridge be reset to the original setting value. And the alert status is released. For example, if user set the capacity of the “FLT 1” and “FLT 2” as 500 gallons and 1000 gallons. When the total flowing volume reaches 500 gallons, the DigiFlow 6000R will go into alert status, and blink “ FLT 1 ” when there is water flowing through. However the DigiFlow 6000R will keep calculate the total flowing volume and monitor the other filter. When user change the 1st filter cartridge and press RESET button at the total flowing volume 520 gallons. The end of life alert of the 1st filter cartridge will be at 1020 gallons (520 + 500 gallons).
Low Battery Power Alert When the battery power lower than normal working level, the buzzer will beep twice to notice and the battery symbol on the screen will blink to notice user to change the battery. Once the batteries are replaced, the alert will be released. The data will be kept in memory and stored back when user replace the batteries.
Code: 01001205
INSTALLING BATTERY Slide off the cover case of the battery room, and put into 2AAA batteries.Then slide the cover case back.
SETTING CAPACITY AND TIMING Keep pressing display button, then press reset button and release both of the buttons. The DigliFlow 8000T will go into setting procedure. The digit will flash to notice you that the setting procedure is on.
SETTING CAPACITY Press display button to choose the capacity. The sequence is 0-100-200-300...9800-9900-OFF. Then press reset button to save the capacity. Then go into Timing setting. *The capacity mode will be disabled when you choose OFF.
SET TIMING Press Display button to choose the Timing. The sequence is 0-30-60-90...690-720-OFF. Then press reset to save the Timing. The setting procedure is completed. *The capacity mode will be disabled when you choose OFF. **The setting procedure will be terminated, and go back to the original status if there is no input for 10 seconds.
CONNECTING FITTING The specification of the DigiFlow8000T connectors is 3/8" MNPT female. You could use any 3/8" MNPT male connectors.
DISPLAY BUTTON: Press display button is to display the status of the three modes of the DigiFlow 8000T. Capacity mode: showing the capacity left. Timing mode; showing the timing left. Flow rate mode: showing the current flow rate. The sequence is Flow-rate - Timing Capacity...
RESET BUTTON: Press reset button is to reset the setting to be the last setting.
ALARM - Noticing Alarm When Capacity is lower than 30 gallons or timing is lower than 7 days, the buzzer will beep once and the digit will beep once and the digit will flash to notice you to prepare changing the filter cartridge when there is any water flowing through DigiFlow 8000T or press the display button.
Warning Alarm When Capacity reaches 0 gallon or Timing reaches 0 day, the buzzer will beep twice and the digit will flash to notice you to change the filter cartridge when there is any water flowing through Digiflow 8000T or press the display button.
Low Battery Power Alarm When the battery power lower than normal working level, the buzzer will beep twice to notice you to change the battery. The data will be kept in memory when the battery power is run out or battery is removed. Code: 01001208
Flow meter with external turbine type Time-Metered measures water flow in liters or gallons. * IN - OUT: 1/4" BSP male
Features: - Filter capacity life monitor (from 500 to 99500 liters); - Filter elapse time monitor (from 30 to 720 days); - Flow rate display (0,8 -8,0 lpm); - Near end of filter life alert; - End of filter life alert; - Low battery power alert; - Automatic data memorized when battery power is off.
Application: - Undercounter water treatment system; - Commercial water treatment system; - Water dispenser.
INSTALLING BATTERY
SETTING CAPACITY AND TIMING Keep pressing display button, then press reset button and release both of the buttons. The DigliFlow 8100T will go into setting procedure. The digit will flash to notice you that the setting procedure is on.
CONNECTING FITTING The specification of the DigiFlow8100T connectors is 1/4" BSP male.
SETTING CAPACITY Press display button to choose the capacity. The sequence is -500-1000...99500-OFF. Then press reset button to save the capacity. Then go into Timing setting.
SET TIMING Press Display button to choose the Timing. The sequence is 0-30-60-90...690-720-0-30OFF. Then press reset to save the Timing. The setting procedure is completed. *The capacity mode will be disabled when you choose OFF. **The setting procedure will be terminated, and go back to the original status if there is no input for 10 seconds.
OPERATING The DigiFlow 8100T will be automatically on when there is any water flowing through the sensor. It will be automatically off wen there is no water flowing for 10 seconds.
DISPLAY BUTTON: Press display button is to display the status of the three modes of the DigiFlow 8100T. Capacity mode: showing the capacity left. Timing mode; showing the timing left. Flow rate mode: showing the current flow rate. The sequence is Flow-rate - Timing Capacity...
RESET BUTTON: Press reset button is to reset the setting to be the last setting.
ALARM - Noticing Alarm When Capacity is lower than 100 gallons or timing is lower than 7 days, the buzzer will beep once and the digit will beep once and the digit will flash to notice you to prepare changing the filter cartridge when there is any water flowing through DigiFlow 8100T or press the display button.
Warning Alarm When Capacity reaches 0 gallon or Timing reaches 0 day, the buzzer will beep twice and the digit will flash to notice you to change the filter cartridge when there is any water flowing through Digiflow 8100T or press the display button.
Low Battery Power Alarm When the battery power lower than normal working level, the buzzer will beep twice to notice you to change the battery. The data will be kept in memory when the battery power is run out or battery is removed.
