Accumulator tanks

The connection of the FS-2000(H) is 3/ 8” NPT female. Its body and turbine are made of acetal copolymer (POM) material. The best location to connect the FS-2000(H) is on the outlet channel of the filter. Because it's sensitive to rust and dirt. It could be installed at vertical or horizontal position.

For most of residential water filters and coolers, the FS-2000(H) is an ideal flow measurement and control solution for filter life or water dispensation monitor , it detects precisely, works reliable and is most affordable. The FS-2000(H) is compatible with the PWA 608M , the electronic flow monitor control board and the PWA608T, the electronic flow totalizer control board.

Switching Voltage : Max. 200 Volts Switching Current : Max. 0.5 Amps Carry Current : Max. 1.5 Amps Switching Frequency : Max. 500 Hz Contact Resistance : Max. 150 mO Life Expectancy : 1 x 108 Ops Mounting Method: Horizontal to Vertical Flowing Direction: Bi-Direction Flow Rate: Maximum 3.72 gpm, 14.1 lpm (vertical and horizontal mounting) Minimum 0.40 gpm, 1.50 lpm (horizontal mounting) Minimum 0.26 gpm, 1.00 lpm (vertical mounting) Calibration: 0.00106 gallon, 0.004 liter per pulse 0.00088 gallon, 0.0033 liter per pulse (vertical mounting) Connection: 3/8 inch NPT Female Temperature: 0 to 40? (32 to 104 ?) Pressure: Max. 6.0 bar (85 psi) Weight: 50g (1.92 oz.) Accuracy: +/- 10% Materials: Sensor Body : Acetal Copolymer, TICONA M90 Turbine: Acetal Copolymer, TICONA M90 Stick of Turbine: #304 Stainless Steel O-Ring: E.P.D.M.

Code: 060045

Pressurised accumulator tanks in steel painted white 1,8 Gal.6,8 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 210mm. Height: 340mm.

Code: 060061

Pressurised accumulator tanks in steel painted blue 2,1 Gal.- 8 lt. (1)

Inner membrane: butyl * Inner covering: Polypropylene liner * Max. work pressure 7 kg/cm2. * Preloading pressure 0.5 kg/cm2. * Diameter: 202mm. * Height: 260mm. * Connection 1/4" Code: 060047

Pressurised accumulator tanks in steel painted white 2,2 Gal.8,3 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 230mm. Height: 360mm. Code: 060063

Pressurised accumulator tanks in steel plastic covering 3 Gal.11,3 lt. (1)

Code: 060046

Pressurised accumulator tanks in steel and stainless steel 3,2 Gal.- 12,1 lt. (1)

Variants

Code 060046-S 060046-SS Description Pressurised accumulator tanks in steel white painted 3,2 Gal.- 12,1 lt. (1) Pressurised accumulator tanks in stainless steel 3,2 Gal.- 12,1 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Material: Steel Diameter: 275mm. Height: 340mm. Code: 060048

Pressurised accumulator tanks in steel plastic covering 5,5 Gal.- 21 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 280mm. Height: 410mm.

Code: 060050

Pressurised accumulator tanks in steel painted blue 10,7 Gal.40,6 lt., 14,4 Gal. - 54,5 lt. (1)

Variants

Code 060050-01 Description Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1)

060050-01 10,7 Gal.- 40,6 lt * Diameter: 390mm. * Height: 500mm. * Connection: 1"F. or open/close ball valve with compression fitting *060050-02 14,4 Gal. - 54,5 lt. * Diameter: 390mm. * Height: 580mm. * Connection: 3/4"F.

Code: 060051

Accumulator tanks in steel 20 Gal.- 76 lt.

Diameter: 400mm. Height: 730mm. Connection: 3/4"M.

Code: 060052

1/4" F - 1/4" M plastic square