1 minute read
Sensors
Code: 060023
Single TDS Sensor Probes
Advertisement
Features - Stainless steel sensor. - Probe: 1/4". - Cable: 45" (114,30 cm.). - Connector: Single 4-pin. - Thermometer pin: Yes. - Sensors have a green wrap and no label. - Pressure Rating: 16bar @ +23°C. Code: 060024
In-line flow sensor
The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It can detect water flow from 1.7 to 14.1 L /min. The connection of the FS-2000(H) is 3/ 8” NPT female. Its body and turbine are made of acetal copolymer (POM) material. The best location to connect the FS-2000(H) is on the outlet channel of the filter. Because it's sensitive to rust and dirt. It could be installed at vertical or horizontal position.
For most of residential water filters and coolers, the FS-2000(H) is an ideal flow measurement and control solution for filter life or water dispensation monitor , it detects precisely, works reliable and is most affordable. The FS-2000(H) is compatible with the PWA 608M , the electronic flow monitor control board and the PWA608T, the electronic flow totalizer control board.
Switching Voltage : Max. 200 Volts Switching Current : Max. 0.5 Amps Carry Current : Max. 1.5 Amps Switching Frequency : Max. 500 Hz Contact Resistance : Max. 150 mO
