Solenoid valves

NOTA BENE: The use of a control valve is recommended for the installation of a tube for sparkling water bigger than 4mm or 5/32''. In this mode the sparkling water will not have a metal taste.

Code: 060002

Solenoid valve 24VDC female 1/4" FTP w/filtering mesh

Code: 060004

Floating Valve , Mechanical Style , Tube 1/4"

Code: 060005

Floating, Micro-Switch, 10 Ampere

Variants

Code Description

060008-01 Solenoid valve at one way Voltage 220-AC 060008-02 Solenoid valve at one way Voltage 24V-DC 060008-03 Solenoid valve at one way Voltage 24V-AC

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4"x1/4" Flow rate: 2,5 Lt./Min. - 2,5bar Nominal pressure: 10bar Code: 060091

Solenoid valve R series - 230V. AC thread 3/4" M. - quick fit JG 8mm. with plastic bracket

Solenoid valve R series - 230V. AC thread 3/4" M. - quick fit JG 8mm. with plastic bracket

Code: 060077

One way flowmeter solenoid valve 220V.~240V. - 50/60Hz 6VA OD stem 10mm. (100)

Features

Ambient temperature: Temperature of fluid: Operating pressure: 2 °C ÷ 60 °C 2 °C ÷ 70 °C 0.02 ÷ 1 MPa (0.2 ÷ 10 bar)

Flow rate: According to the mounted regulator (2.5 to 8 l/min)

Minimum flow of signal presence: 0.6 l/min

Minimum flow of flow rate measure: According to the flow regulator used

Accuracy of the flow measure: According to the flow rate (+/-4.5% to +/-8%)

Hall sensor power supply: 3.8 – 24 Vdc

Resistance to Bursting: > 6 MPa ( > 60 bar ) a 25°C

Life: 50.000 cycles - 200.000 total litres

Variants

Code Description

060077-01 One way flowmeter solenoid valve 220V.~240V. - 50/60Hz 6VA - OD stem 10mm. (100) 060077-03 Flowmeter solenoid cable 060077-02 One way flowmeter solenoid valve bracket 060077-04 Replacement one way flowmeter solenoid valve mesh filter

Servo-assisted solenoid valve for water with integrated flow sensor. This valve is typically used on household appliances connected to the hydraulic network. A flow sensor, capable of measuring the volume of delivered water, and a flow limiter, capable of limiting the value of the water flow rate, as a function of inlet pressure, are integrated to the valve. The flow sensor is constituted by an impeller immersed in the water flow. The impeller rotation cause the ferrite magnets to rotate in front of a hall effect sensor. The obtained signal is a square wave with the pulse frequency proportional to the flow of water.

Features: * Water inlet with 3/4 inch BSP thread for EU applications and 3/4 inch GH for U.S. applications. * Water output with connection for rubber hoses - 10/12 mm. * Coil electrical connections with 6.3x0.8mm terminals and rast connectors 2.5 (IP00). * Electrical connections of the flow sensor of type rast 2.5. * The sensor is protected by double insulation, and therefore is suitable for use even on applications that are not equipped with safety transformers SELV. Code: 060111

One way solenoid valve 220V.~240V. - 50/60Hz 6VA - OD stem 10mm. (100)

Features

Ambient temperature: Temperature of fluid: Operating pressure: Flow rate: Resistance to Bursting: Life: 2 °C ÷ 60 °C 25 °C ÷ 90 °C 0.02 ÷ 1 MPa (0.2 ÷ 10 bar) According to the mounted regulator (2.5 to 8 l/min) > 6 MPa ( > 60 bar ) a 25°C 50.000 cycles - 200.000 total litres

Normally Closed (NC).

Code: 060011

Solenoid valve 24V-DC / 24V-AC 1/4" FPT

Variants

Code Description

060011-01 Solenoid valve 24V-DC / 24V-AC 1/4" FPT 060011-02 Solenoid valve 24V-AC 1/4" FPT

Normally closed.

Code: 060009

Solenoid valve at one way 220V. quick fitting 1/4"

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4" X 1/4" quick fitting. Flow rate: 2,5 Lt./Min. - 2,5bar. Nominal pressure: 10bar. Voltage: 220V. - AC

2-ways solenoide valve with body in food grade resin membrane in platinic silicone 3/4"x1/4" Voltage: 220V.-AC Code: 060007

Solenoide valve 3 entrances - 1 OutPut 220V. / 24V.

Variants

Code Description

060007-01 Solenoide valve 3 entrances - 1 OutPut Voltage 220V.-AC 060007-02 Solenoide valve 3 entrances - 1 OutPut Voltage 24V.-DC

3-ways solenoide valve, with body in food grade resin and membrane in platinic silicone 3/4" x 1/4". Flow rate: 6,7 Lt./Min. - 3,5bar. Nominal pressure: 10bar. Voltage: 220V. - AC Voltage: 24V. - DC Code: 060099

One way solenoid valve 230V. thread 1/4" F. for cod. 20030023 drain line

Code: 060100

One way solenoid valve 230V. quick fitting 6mm. for cod. 20030023 - drain line

Solenoid valve new version with JG 6mm. quick fit for cod. 20030023

Code: 20040031

Solenoid valve R-Double series, 180°, IN thread 3/4" M, OUT 2xJG 8mm., 220V., with plastic bracket

Solenoid valve R-Double series, 180°, IN thread 3/4" M, OUT 2xJG 8mm., 220V., with plastic bracket

Code: 20040032

Solenoid valve R-Double series, 180°, IN thread 3/4" M, OUT 2xJG 8mm., 220V., with plastic bracket and red flow reducer 0,25 lt.

Features: Structure: POM Compensator: NBR / LSR

Work features Fluid direction: Unidirectional Working pressure: 0-10bar. (0-1Mpa)