Water purity testers

Variants

Code Description

060088-01 EU power supply cable Female IEC 90° plug - Italian 3-plug L type Black

Cable: 2mt. (3x0,75mm.)

Code: 060013

Electrolysis system for reverse osmosis test

Variants

Code Description

060013-01 Electrolysis 220 V. 060013-04 Aluminium electrode replacement for 060013-02 060013-05 Iron electrode replacement for 060013-02

Code: 060014

RT-770 In-Line TDS Tester

060014-01 RT-770 In-Line TDS Tester AA batteries x 2 - 40ppm. 060014-02 RT-770 In-Line TDS Tester AA batteries x 2 - 80ppm. 060014-03 RT-770 In-Line TDS Tester AA batteries x 2- 100ppm. 060014-04 RT-770 In-Line TDS Tester AA batteries x 2- 150ppm. 060014-05 RT-770 In-Line TDS Tester 12-24V DC power connection - 40ppm. 060014-06 RT-770 In-Line TDS Tester 12-24V DC power connection - 80ppm. 060014-07 RT-770 In-Line TDS Tester 12-24V DC power connection - 100ppm. 060014-08 RT-770 In-Line TDS Tester 12-24V DC power connection - 150ppm.

The RT-770 is an in-line and low cost testing device to monitor the quality of pure water which is generated by Reverse Osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. The measured TDS reading is compared to the pre-setting TDS value. The RT-770 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-770 turns on Green light. Alert options available: 40ppm - 80ppm - 100ppm - 150ppm.

Features: One push-button testing Internal battery power or external power Easy connected to most of reverse osmosis water filters

Operating guide 1-Cut off the outlet tube(between tank of the reverse osmosis water filter and faucet). 2-Insert the tube into the quick fitting. The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy testing.

Specification : Dimension : 70mm(L) x 55m(W) x 33mm(D) Weight : 80 g Cable length : 45 cm. Operating : 3000 operating times Power : AA batteries x 2 or 3 – 24V DC

Code: 060015

RT-790, In-Line Programmable Automatic TDS Tester

The RT-790 is an in-line and low cost testing device to monitor the quality of pure water which is generated by reverse osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. The measured TDS reading is compared to the pre-setting TDS value. The RT-790 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-790 turns on Green light.

Feature: * Automatic testing or manual testing * Internal battery power

Connecting Fitting Cut off the outlet tube (between tank of the reverse osmosis water filter and faucet). Insert the tube into the quick fitting

Operating Automatic testing: a)Testing per hour. b)If testing resistance value is bigger than setting resistance value, it isn’t displayed on LCD. c)If testing resistance value is smaller than setting resistance value, it will be recorded. After five times record, it will enter into warning status and stop testing.

Manual testing: a)Press the button for testing. b)If testing resistance value is bigger than setting resistance value, the blue light will flash five times and enter into automatic testing model. c)If testing resistance value is smaller than setting resistance value, after red light flashing and alarm warning five times, it will enter into warning status and stop testing.

5.4 Reset Use stick to keep pressing the “RESET” button for 4 seconds or reset the batteries. The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy testing.

Specification: * Dimension: 70mm(L) x 55m(W) x 33mm(D) * Weight: 80g. * Cable length: 45 cm. * Operating: 3000 operating times * Power: AA batteries x 2 * Operating current: 1 mA@3V DC Code: 060016

Quick Check TDS/Conductivity Monitor

Press the "Push-to-Check" button for an instant water quality check.

Features - With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively. - Tests for TDS or conductivity levels. - Eight programmable set points (by dip switch). - Bright LED lights. - Simple to use. - Factory Calibrated to 100 ppm NaCl. Re-calibration is unncessary. - Excellent Reverse Osmosis (RO) or Deionization (DI) monitor. - Installs quickly and easily.

Specification: - TDS/EC Range: 0-5000 ppm (10,000 µS); - Max. Set Point: 50 ppm (100 µS); - Accuracy: ±3%; - ATC: No; - Cable Length: 24,5" (including sensor); - Fittings: 1/4"; - Power source: 4x1.5V button cell batteries (included); - Battery life: Approx. one year; - Size: 7,6x2x4,7 cm (3x0,8x1,9 in.). Code: 060017

Quick Check TDS LCD Monitor

Ideal for any water filtration system, including reverse osmosis systems, coolers and much more.

Features - Displays TDS level of a single water line. - Highly efficient and accurate due to its advanced microprocessor technology. - Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. - Wide Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) - Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. - Installs quickly and easily.

Specification: - Range: 0-9990 ppm; - Accuracy: ±2%; - Conversion Factor: NaCl (avg. 0.5); - Cable Length: 24,5" (including sensor); - Fittings: 1/4" standard, also available with 3/8" or 1/2"; - Power source: 2x1,5V. button cell batteries (included); - Battery life: approx. 1000 hours of continuous use; - Size: 7,6x2x4,7 cm (3x0,8x1,9 in.).

Measure the tap water coming in vs. the purified water going out of your water filtration system at any time.

Features: - Displays TDS levels of the feed water and product water with in & out electrode probes. - Highly efficient and accurate due to its advanced microprocessor technology. - Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. - Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) - Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. - Installs quickly and easily.

Specification: - Range: 0-9990 ppm; - Accuracy: ±2%; - Conversion Factor: NaCl (avg. 0.5); - Cable Length: 24,5" (including sensor); - Fittings: 1/4" standard, also available with 3/8" or 1/2"; - Power source: 2x1,5V. button cell batteries (included); - Battery life: approx. 1000 hours of continuous use; - Size: 7,6x2x4,7 cm (3x0,8x1,9 in.). Code: 060019

Dual TDS Sensor Probes for the DM-1

Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 24,5". - Connector: 8-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT".

- Pressure Rating: 16bar @ +23°C. Code: 060020

DM-2 Commercial/residential in-Line Dual TDS Monitor

Install on industrial systems such as car washes, window washing, manufacturing, and food processing.

Features: - Highly efficient and accurate due to its advanced microprocessor technology. - Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. - Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. - Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking 'x10' image. - Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. - Installs quickly and easily.

Differences from the DM-1: - Designed for commercial/industrial applications. - Stronger, water-resistant casing. - Calibration can be done individually or simultaneously on each line. - Improved design, including an extra large, easy-to-read LCD display. - Longer, waterproof, shielded cables. - Variable mounting bracket.

Specification: - Range: 0-9990 ppm; - Accuracy: ±2%; - Conversion Factor: NaCl (avg. 0.5); - Cable Length: 46" (including sensor); - Calibration: Factory calibrated to NaCl 342 ppm. Re-calibration can be done separately for each line, or simultaneously for both.; - Power source: 2 x AA batteries (included); - Battery life: Approx. 12-18 months; - Size: 11,6x6,8x1,8 cm. (4,6x2,6x0,7in.).

Features: - Stainless steel sensors. - Probe: 1/4". - Cable: 45" (114,3 cm.). - Connector: dual 4+4-pin. - Thermometer pins: Yes. - Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT". - Pressure Rating: 16bar @ +23°C. Code: 060054

PM1 OEM In-Line TDS purity monitor

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service. FEATURES * OEM single line internal TDS monitor that is ideal for enclosed water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200).

SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light, optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps for 20 seconds, then goes silent * Power Source: AC 110V / 220V ±2% * Cable Length: 62.86 cm (24.75") * Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 1/4" fitting) * Circuit Board Dimensions: 8.9 x 6.9 x 3.8 cm (3.5 x 2.7 x 1.5 in.) * Weight: 266.5 g (9.4 oz.)

Variants

Code Description

060058-01 Electrolysis demostration briefcase 24 VDC. 060058-02 Electrolysis replacement precipitator 060058-03 Aluminium electrode replacement for 060058-02 060058-04 Iron electrode replacement for 060058-02 060058-05 Electrolysis replacement ballast 060058-06 Empty electrolysis briefcase with foam

The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the quantity of dissolved salts it contains. Contents of the briefcase: * Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer * Code: 060065

PM-2 external In-Line TDS Purity Monitor 220V.,110V.

Variants

Code Description

060065-02 PM-2 external In-Line TDS Purity Monitor 110V.

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service. FEATURES * External single line internal TDS monitor that is ideal for most water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200).

SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light, optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps

for 20 seconds, then goes silent * Power Source: AC 110V. / 220V. ±2% * Cable Length: 62,86 cm (24,75") * Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 1/4" fitting) * Dimensions: 12,9x7,3x6 cm. (5x2,9x2,4 inch.) * Weight: 340gr. (12oz.) Code: 060067

DM-2EC Commercial/residential in-Line Dual Conductivity Monitor (5)

Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems such as car washes, window washing, manufacturing, and food processing.

Features: - Highly efficient and accurate due to its advanced microprocessor technology. - Displays EC levels of the Feed Water and Product Water with in & out electrode probes. - Auto-Off function conserves battery power. The unit shuts off automatically after 3 minutes. - Dual Range - Measures from 0-999 µS, with a resolution of 1 ppm. From 1000 to 9990 µS, the resolution is in 10 µS increments, indicated by a blinking 'x10' image. - Factory Calibrated: calibrated to 1413 µS. The DM-2EC features digital calibration. - Diagnostic error messaging. - Shielded sensor cables. - Installs quickly and easily.

Differences from the DM-1: - Measures EC (Electrical Conductivity) in µS (micro-Siemens). - Designed for commercial/industrial applications. - Stronger, water-resistant casing. - Digital calibration can be done individually on each line. - Improved design, including an extra large, easy-to-read LCD display. - Longer, waterproof, shielded cables. - Variable mounting bracket.

Specification: - Range: 0-9990 µS; - Accuracy: ±2%; - Cable Length: 46" (including sensor), shielded cables; - Sensor: Dual, 1/4" diameter for quick-connect fittings (model SP-3, included); - Digital Calibration: Digitally factory calibrated to 1413 µS. Re-calibration can be done separately for each line.; - Power source: 2x AA batteries (included); - Battery life: Approx. 2 years; - Size: 11,6x6,8x1,8cm (4,6x2,6x0,7in.).