INDEX Maintenance Sanitation home systems .............................................................................................................. 3 Maintenance water softeners ............................................................................................................................... 7
Maintenance Sanitation home systems Code: 13513503
Bacwater 120cc Sanitizing for domestic reverse osmosis
Efficient hygienizing product with a high active chlorine content. It has several applications, and is specially indicated for the treatment of drinking water in circuits and for water sterilization to wash fruit, vegetables, dishes and instrumentation. "Beach suitable to disinfect drinking water". Dosage: The correct dosage depends on the necessary active chlorine concentration for each specific application. It is recommended to dose three drops of product per litre of drinking water. Precautions: Do not ingest. Irritating. Avoid eye and direct skin contact. Keep out from children's reach. In case of eye contact, rinse immediately with water and seek medical assistance. In case of ingestion, seek immediate medical assistance and show the bottle or the label. Do not use on persons with sensitivity to any of its components. In case of accident, refer to your corresponding national toxicology service. Attention: Do not mix with other chemical products since it could release hazardous gases (chlorine). Qualitative composition: Contains a 5% aprox. of active chlorine. Code: 060049
Holder with wheels for compact equipment. Easy maintenance
Code: 13513509
Cooler Clean with dosing device product for the hygienisation of water dispensers 1lt.
27 July 2018
3/9
CoolerClean Rinse has been especially designed to sanitise the interior of the water cooler, it also removes Pseudomonas Aeruginosa and Biofilm from water coolers with a 5-minute contact time. Used in combination with CoolerClean Spray, you can do a 10-minute Cleaning-In-Place (1 bottle of CoolerClean Rinse contains 40 cleanings). Contains: Hydrogen Peroxide(5%), carriers, stabilizers. Use: Cooler Clean Rinse is designed specifically to decontaminate the reservoir inside the cooler. The special squeeze'n' measure bottle allows you to measure the exact dose of product required for one cooler (25ml per 1.7 liters). Use CoolerClean Rinse in combination with CoolerClean Spray. Storage conditions: Avoid direct sunlight. Contents: 1liter Gold Seal Approval: in 2007, CoolerClean Rinse became the first product of its kind in the world to be awarded GoldSeal Approval under NSF/ANSI Standard 60. This means that CoolerClean Rinse is a safe and effective product to use in the field, that delivers the results you need. CoolerClean: GoldSeal Certified under NSF/ANSI Standard 60! - It is important to use fast, safe and effective products in the field. - CoolerClean Rinse is the first product of its kind to be awarded Gold Seal certification under NSF/ANSI Standard 60. - This ensures that our products are the premier choice to raise the hygiene standard of your installed cooler base. - CoolerClean is the global name in cooler hygiene, and has been on the market for 10 years. Code: 13513507
Cooler Clean sanitizing sprays for household systems 100ml
CoolerClean spray is a liquid disinfectant designed for the hygienic cleaning of water coolers (bottle cap, waterguard, taps, mix faucets, and all erogation water points). CoolerClean Removes Pseudomonas Aeruginosa and Biofilm from water coolers with a 30-minute contact time. Water-miscible concentrate (ready-for-use solution). Contains: Hydrogen peroxide(2,5%), carriers, stabilisers. Use: CoolerClean Spray has been designed to hygienically clean critical control points of a watercooler. Disinfection of watercoolers must take place once every three Legal framework: The product is only to be used to control bacteria (excl. Mycobacteria and bacterial spores) in water coolers for drinking water. This product is both for domestic and professional use. It can also be applied in hospitals and other care institutions, with the exeption of T.B. wards and clinics. Gold Seal Approval: in 2007, CoolerClean Rinse became the first product of its kind in the world to be awarded GoldSeal Approval under NSF/ANSI Standard 60. This means that CoolerClean Rinse is a safe and effective product to use in the field, that delivers the results you need.
27 July 2018
4/9
CoolerClean: GoldSeal Certified under NSF/ANSI Standard 60! - It is important to use fast, safe and effective products in the field. - CoolerClean Rinse is the first product of its kind to be awarded Gold Seal certification under NSF/ANSI Standard 60. - This ensures that our products are the premier choice to raise the hygiene standard of your installed cooler base. - CoolerClean is the global name in cooler hygiene, and has been on the market for 10 years. Code: 13513510
Cooler Clean Home hygienisation kit for water coolers reverse osmosis
CoolerClean Home allows customers to clean their own water cooler. You sell a product instead of providing the hygiene service yourself. This means you do not have the staff costs, but achieve a solid profit margin. It can also be used as a supplement to the cleaning-in-place of water coolers, for customers that do not want a contract, or for customers located at the outer limit of the geographical area. Package contents 4x pair hand gloves 1x Miraclean sponge for exterior 1x Cooler Clean Spray Holder 1x Coler Clean Spray 100ml. 1x Cooler Clean Rinse CoolerClean spray CoolerClean spray is a liquid disinfectant designed for the hygienic cleaning of water coolers (bottle cap, waterguard, taps, mix faucets, and all erogation water points). CoolerClean Removes Pseudomonas Aeruginosa and Biofilm from water coolers with a 30-minute contact time. Water-miscible concentrate (ready-for-use solution). Contains: Hydrogen peroxide(2,5%), carriers, stabilisers. CoolerClean Rinse CoolerClean Rinse has been especially designed to sanitise the interior of the water cooler, it also removes Pseudomonas Aeruginosa and Biofilm from water coolers with a 5-minute contact time. Used in combination with CoolerClean Spray, you can do a 10-minute Cleaning-In-Place (1 bottle of CoolerClean Rinse contains 40 cleanings). Contains: Hydrogen Peroxide(5%), carriers, stabilizers. Use: Cooler Clean Rinse is designed specifically to decontaminate the reservoir inside the cooler. The special squeeze'n' measure bottle allows you to measure the exact dose of product required for one cooler (25ml per 1.7 liters). Use CoolerClean Rinse in combination with CoolerClean Spray. Gold Seal Approval: in 2007, CoolerClean Rinse became the first product of its kind in the world to be awarded GoldSeal Approval under NSF/ANSI Standard 60. This means that CoolerClean Rinse is a safe and effective product to use in the field, that delivers the results you need. CoolerClean: GoldSeal Certified under NSF/ANSI Standard 60! - It is important to use fast, safe and effective products in the field.
27 July 2018
5/9
- CoolerClean Rinse is the first product of its kind to be awarded Gold Seal certification under NSF/ANSI Standard 60. - This ensures that our products are the premier choice to raise the hygiene standard of your installed cooler base. - CoolerClean is the global name in cooler hygiene, and has been on the market for 10 year Code: 13513511
Cooler Clean Sponge for water coolers 8pcs pack
The fastest way to clean the outside of the watercooler without using soap, the ultimate time saver in the field! Removes tough dirt, permanent pen marks, lime scale, scuff marks and dirt/stains from water coolers just damp with water - no detergent or chemical needed. Do not use on surfaces that are polished/glossy or on finishes that are brushed, satin or dark. Do not use with chlorine bleach. 8pcs pack. Code: 13513512
Aquasil 20/40 anti-corrosive and anti-scaling for municipal water 5 LT tank
Main features AcquaSil 20/40®'s balanced composition stabilizes calcium and magnesium salts (that make limescale) to prevent corrosion. It works with water within 5 and 35° F. AcquaSil 20/40® proprierties are guaranteed with temperatures up to 80°c or 60° for accumulated water. AcquaSil 20/40® protects new systems and pipes and cleanes the old ones. AcquaSil 20/40® is not considered hazardous due to the actual legislation. Purpose Limescale and corrosion are the worst enemies of plumbing systems. The use of corrosion and limescale inhibitor products, such as polyphosphates, can be very helpful. AcquaSil 20/40® is a food grade watery polyphosphate solution for corrosion and limescale cleaning and prevention for plumbing systems. Dosage can be made with miniDOS and bravaDOS. How it works The polyphosphate protects metals from corrosion and encrustation thanks to its capacity called "threshold effect".
27 July 2018
6/9
Uses, terms of use and dosage AcquaSil 20/40® must be used with MiniDOS and BravaDOS pumps. It can be used on domestic municipal water to protect: boilers, hot water makers, plumbing, washing machines, dishwashers and house appliances that work with water. Do not use with solar boilers. Dosage must be done before use. Warning Read the safety data sheet before use. In case of contact with eyes, wash with water. Ask the producer if you mean to use the product differently. We decline any responsibility in case of improper use. Water to treat traits AcquaSil 20/40® must be used on potable water. It adds phosphorus to the water. Law compliance AcquaSil 20/40® is a product in compliance with the 2008/84/EC commision directive and the UNI EN 1212:2005. The producer works in compliance with the UNI EN ISO 9001:2008 with the certificate n°50 100 7368 issued by the Italian entity Tüv Italia S.R.L. Safety data sheet The safety data sheet is included in compliance with the law. Transport AcquaSil 20/40® is not a dangerous material. Code: 13513513
Disposal sterilizer device for water purifiers unit 1/4"x1/4"
Internal Chlorin tab
Maintenance water softeners Code: 13513502
Clean softener 1 bags granulated product to clean resin softeners 30gr. (20)
Clean softener is a monodose, granulated product for water softeners. It is perfect for removing and/or preventing iron and other metals contamination on the ion exchange resins.
27 July 2018
7/9
Preventive treatment: Pour into the brine tank at the rate of 1g. per 1Kg. of salt. Cleaning treatment: Pour into the brine tank chimney at the rate of 1g. per 1l. of resin. Wait 10 minutes for the powder to dissolve and make a manual regeneration. In case of a big contamination, repeat the process. Usage: Every 12 months.
27 July 2018
8/9
Powered by TCPDF (www.tcpdf.org)