255/760, 740 Autotrol residential valve

Options/Accessories • 6" to 10" Diameter Pressure vessels • Regenerant Injectors: E, F, G, H, and J • External Drain Line Flow Controls (DLFC): 1.0, 1.3, 1.7, 2.2 gpm (3.8, 4.9, 6.4, 8.3 Lpm)

Code: 15010101

Water softener valve Autotrol 255/760, 255/740 Eco Logix 1" Metered, Time

Variants

Code Description

15010101-050 Water softener valve Autotrol 255/760 Metered/Time - injector and flow regulator 8" W./O. mixing and connectors (4) 15010101-002 Water softener valve Autotrol 255/740 Logix 1" - Time - injector, flow regulator 6" (4) 15010101-019 Bypass for Autotrol valve 255 - W./O. connectors 15010101-013 Autotrol 255 - Bypass connectors 3/4" (Required 1st. installation opt. A) (x 2pcs.) 15010101-014 Autotrol 255 - Bypass connectors 1" (Required 1st. installation opt. B) (x 2pcs.) 15010101-017 Mixing inox Logix (Required 1st. installation) 15010101-016 Yoke brass connection 1" 15010101-043 Yoke brass connection 1" with integrated mixing screw (exclude Mixing inox Logix) 15010101-018 Chlorine generator kit for Autotrol valve 255 15010101-048 (5) Autotrol 255 valve - replacement top plate 15010101-022 (7) Autotrol 255 valve - replacement cover slim line 15010101-042 (7) Autotrol 255 valve - replacement cover long line 15010101-053 (8) Autotrol 255 O-Ring kit tank adapter x 6pcs 15010101-038 (9) Autotrol 255 O-Ring kit: piping boss (3 pcs) 15010101-041 (12) Autotrol 255 - replacement Camshaft 15010101-021 (13) Autotrol 255 valve - replacement Logix Motor / Gear / Cable 15010101-023 (15) Autotrol 255 Injector E - yellow (6" vessel) 15010101-024 (15) Autotrol 255 Injector F - peach (7" vessel) 15010101-025 (15) Autotrol 255 Injector G - tan (8" vessel) 15010101-031 (15) Autotrol 255 Injector H - light purple (9" vessel) 15010101-026 (15) Autotrol 255 Injector J - light blue (10" vessel) 15010101-032 (15) Autotrol 255 Injector K - pink (12" vessel) 15010101-033 (15) Autotrol 255 Injector "L" - orange (vessel 13"/14") 15010101-049 (17) Autotrol 255 flow regulator with o-ring Vessel 6" 15010101-027 (17) Autotrol 255 flow regulator with o-ring (1.2 gpm; 4.5 lpm) Vessel 7" 15010101-028 (17) Autotrol 255 flow regulator with o-ring (1.6 gpm; 6.1 lpm) Vessel 8" 15010101-034 (17) Autotrol 255 flow regulator with o-ring (2.0 gpm; 7.6 lpm) Vessel 9" 15010101-029 (17) Autotrol 255 flow regulator with o-ring (2.5 gpm; 9.5 lpm) Vessel 10" 15010101-035 (17) Autotrol 255 flow regulator with o-ring (3.5 gpm; 13.2 Lpm) Vessel 12" 15010101-036 (17) Autotrol 255 flow regulator with o-ring (4.1 gpm; 15.5 Lpm) Vessel 13" 15010101-037 (17) Autotrol 255 flow regulator with o-ring (4.8 gpm; 18.2 Lpm) Vessel 14" 15010101-020 (19) Autotrol 255 valve - replacement Air Check Kit 1/4" M. 15010101-039 Autotrol 255 replacement ballast EU plug 15010101-040 (20) Autotrol 255 - replacement optical sensor 15010101-045 (18A) Autotrol 255 - replacement regeneration refill controller 15010101-055 (21) Autotrol 255 - replacement flow control ball

15010101-046 Autotrol 255/760 - replacement Logix 760 volumetric controller display 15010101-047 Autotrol 255/740 - replacement Logix 740 C chronometric controller display 15010101-051 Autotrol 255 - Clapet/discs valve kit for Autotrol 255/740-760 valve 15010101-052 Gasket for Autotrol valve bypass 255 - 1" M. BSP 15010101-054 (6) Autotrol 255 - Clapet / discs valve kit replacement spring

Recommended for automatic systems for residential water softening; valve body in plastic material Noryl, NSF listing; valves sealing rubber for use in cold water, material listing NSF; operating flow rate Kv = 3.4; backwash flow rate equal to 22,7 lpm with delta p 1.72 bar, range = 5 to resin capacity of 75 liters, available with the following series LOGIX timers (see data 01-03-02-IT): or 740 C - ET Electronic lap; or 760 C - ET Electronic volume; or 742 C programmable electronic chronometric; or 762 C Programmable electronic volumetric

complete with power outlet 12/230V - 50Hz European plug; Bottle connection Threaded: 2 ½ "- 8 AN male. * Connect the brine line Threaded ¼ "NPT male. * Diameter of diffuser tube 1.05 "(= 27mm)

RECOMMENDED OPERATING CONDITIONS Pressure 1.38 ÷ 8.27 bar. * Water temperature 2°C to 38°C

For codes 15010101-036 and 15010101-037(point 17) the ball of point 21, should be removed, see exploded.

>>Exploded View<< (Downloadable on-line only) Code: 15010102

Autotrol 255/740 Installation kit (Required 1st. installation)

Variants

Code Description

15010102-01 Autotrol 255/740 Installation kit (Required 1st. installation) 0 - 40lt. resin 15010102-02 Autotrol 255/740 Installation kit (Required 1st. installation) 0 - 80lt. resin