5600SXT, 5800SXT Fleck residential valves

backwash flow rate equal to 22,7 lpm with delta p 1.72 bar, range = 5 to resin capacity of 75 liters, available with the following series LOGIX timers (see data 01-03-02-IT): or 740 C - ET Electronic lap; or 760 C - ET Electronic volume; or 742 C programmable electronic chronometric; or 762 C Programmable electronic volumetric

complete with power outlet 12/230V - 50Hz European plug; Bottle connection Threaded: 2 ½ "- 8 AN male. * Connect the brine line Threaded ¼ "NPT male. * Diameter of diffuser tube 1.05 "(= 27mm)

RECOMMENDED OPERATING CONDITIONS Pressure 1.38 ÷ 8.27 bar. * Water temperature 2°C to 38°C

For codes 15010101-036 and 15010101-037(point 17) the ball of point 21, should be removed, see exploded.

>>Exploded View<< (Downloadable on-line only) Code: 15010102

Autotrol 255/740 Installation kit (Required 1st. installation)

Variants

Code 15010102-01 15010102-02 Description Autotrol 255/740 Installation kit (Required 1st. installation) 0 - 40lt. resin Autotrol 255/740 Installation kit (Required 1st. installation) 0 - 80lt. resin

Code: 15010201

Fleck 5600 SXT water softener valve 1" - Meter, Time

Variants

Code 15010201-001 15010201-020 15010201-021 Description Fleck 5600 SXT water softener valve 1" - Meter, Time with injector 1, DLFC 2, BLFC 0,25 (24a) Fleck 5600 SXT Injector Throat "0" - Red (vessel 6"/7") down flow (24a) Fleck 5600 SXT Injector Throat "1" - White (vessel 8"/9"/10") down flow

15010201-022 15010201-023 15010201-024 15010201-025 15010201-028 15010201-029 15010201-030 15010201-031 15010201-032 15010201-033 15010201-034 15010201-036 15010201-037 15010201-038 15010201-039 15010201-040 15010201-041 15010201-042 15010201-043 15010201-044 15010201-045 (24a) Fleck 5600 SXT Injector Throat "2" - Blue (vessel 12"/13") down flow (23a) Fleck 5600 SXT Injector Nozzle "0" - Red (vessel 6"/7") down flow (23a) Fleck 5600 SXT Injector Nozzle "1" - White (vessel 8"/9"/10") down flow (23a) Fleck 5600 SXT Injector Nozzle "2" - Blue (vessel 12"/13") down flow (42a) Fleck 5600 SXT DLFC 0,8 gpm (vessel 6") (42a) Fleck 5600 SXT DLFC 1,2 gpm (vessel 7") (42a) Fleck 5600 SXT DLFC 1,5 gpm (vessel 8") (42a) Fleck 5600 SXT DLFC 2 gpm (vessel 9") (42a) Fleck 5600 SXT DLFC 2,4 gpm (vessel 10") (42a) Fleck 5600 SXT DLFC 3,5 gpm (vessel 12") (42a) Fleck 5600 SXT DLFC 4 gpm (vessel 13") (41a) Fleck 5600 SXT BLFC 0,12 gpm (vessel 6") down flow (41a) Fleck 5600 SXT BLFC 0,25 gpm (vessel 7"/8"/9"/10") down flow (41a) Fleck 5600 SXT BLFC 0,50 gpm (vessel 12"/13") down flow Fleck 5600 SXT replacement ballast EU plug Fleck 5600 SXT replacement plastic By-pass (6c) Fleck 5600 SXT Meter assy turbine - 3/4" Fleck 5600 SXT replacement inside electronic board (2a,7a) Oring + spacer Kit S&S Resid. for Fleck 4600/5600/9000/9100 valves (8a,9a,10a,11a,12a) Piston assy for 5600/6600/6700 UF valves (28a,20a,27a,30a,31a,29a,32a,33a,34a) Fleck 5600 SXT Replacement complete brine valve

Accessories included: Plastic Bypass (no Yok) * Air Checks 500A 915mm(36") * Brine valve * Bottom distributor tubes

BE PURCHASED WITH ANY VALVE Coupling water inlet / outlet brass 1 "F. (15010202)

Features * Large LCD display with 48 hours of internal power backup capacitor * LCD display alternates between time of day, volume remaining or days to regeneration, and tank in service (twin tank systems only) * Compact turbine meter * Downflow or upflow regeneration cycles * Choose from 4 modes of operation: immediate meter regeneration, delayed meter regeneration, delayed time clock regeneration or day of week regeneration * Continuous flow rate of 20 GPM * Backwash capacity handles tanks up to 12" diameter for softener applications, 10" for filter applications * Double backwash capability

Options * Bypass valve * Softener or filter control valves * Backwash filter * Upflow or downflow regeneration * Meter or day initiated regeneration * Double backwash * Auxiliary switches

Technical Specifications * Flow 1bar dP: 4,4 m³/h * Flow backwash 1,8 bar dP: 1,6 m³/h * Thread cylinder: 2” ½ * Operating pressure: min 1,4 bar - max 8,5 bar * Operating Temperature: min 4°C - max 43°C * Power supply: Transformer 230-24 VAC * Engine Power: 24 VAC * Input Frequency: 50-60 Hz * Valve body material: PPO

>>MANUALExploded a: Control valve assembly Injector - DLFC - BLFCExploded b: Valve Powerhead

AssemblyExploded c: Turbine Meter Assembly 3/4" Code: 15010202

Yoke 1" BSP for Fleck 5600 SXT

Code: 15010203

Fleck 5800 SXT water softener valve 1" Typhoon - Meter, Time

Variants

Code 15010203-01 Description Fleck 5800 SXT Typhoon water softener valve 1" - Meter, Time with injector 1, DLFC 1,5, BLFC 0,25

It covers a wide range of applications (either for softening or filtration purposes): residential, commercial or industrial, and hot or cold water. Over the past decades, Fleck has demonstrated a proven record of performance and reliability year after year.

BRASS PISTON WITH LOW FRICTION COATING: THE HEART OF FLECK VALVES' PERFORMANCE Essential part of Fleck’s reputation for high quality and performance comes from a time-tested hydraulically balanced piston, seal and spacer concept to effectively pilot service flow and regeneration. The only internal moving part is a brass piston with low friction coating.

5800 represents a great step forward in the Fleck product range: the valve platform is made of one hydraulic valve and different controllers, allowing various options, eliminating the need to stock a variety of control valves for filter or softener applications. 5800 features an improved flow, easy servicing (one-piece seal and spacer cartridge for quick and easy replacement) and a quick set-up.

Technical characteristics Tank size (inches) 6, 10, 12, 14, 16 Service flow (m3/h) 4.70 Backwash flow (m3/h) 3.90 Inlet / Outlet (inches) 3/4" - 1" Electrical rating: 12 V DC Transformer input voltage: 100 to 240 VAC Input supply frequency: 50 to 60 Hz Hydrostatic pressure: 300 psi, 20 bar. Working: 20 - 125 psi, 1.4 - 8.5 bar

DIMENSIONS Distributor pilot 1.05 inch O.D., 26.7 mm Drain line 1/2" inch O.D. Injector brine system 1600 Brine line 3/8" Mounting base 2-1/2" - 8 NPSM Height from top of tank 9" - 228mm.

TYPICAL APPLICATIONS Water softener 6" - 16" Ø (limited by maximum injector size) Filter 8" - 16" Ø (based on 10 gpm per sq. ft.)

Features Latest technology and Innovative characteristics. Versatile electronics. Seal & spacer cartridge, reduced spare parts list and snap fit assembly. Reversible 10.000 rpm motor & optical sensor.

Benefits Stronger value proposition and increased value per Euro. Easy retrofit/upgrade. Easy servicing. Fast and secure regeneration cycles.

EASY SERVICING Cartridge-based seal and spacer design for quick and easy replacement.

FASTER SETUP TIME 10,000 RPM fast positioning motor with 12 volt DC drive.

EASY AND QUICK ASSEMBLY A snap fit/clip system with a limited number of screw, allows an easier and quicker assembly and disassembly which facilitates the installation set-up and the maintenance.

OPTICAL TECHNOLOGY Optical sensors control the backwash cycle for trustworthy, precise performance.

CLEAR BACKLIT DISPLAY Easy visibility even in a dark basement.

SOFT WATER REFILL Increases the regenration efficiency and helps reducing the system’s maintenance.

CUSTOMIZE THE FRONT COVER/BEZEL This option allows to create a unique identity.

3 INTERCHANGEABLE TIMERS Allows professionals to upgrade a standard system in a premium one, simply by changing timer.

SXT – Typhoon display Large LCD display and user-selectable time clock or metered function; usable for filter or softener systems.