INDEX In-line type empty cartridges ............................................................................................................................. 3 In Line Mineral Filters post osmosis ................................................................................................................. 4 Sediment In line filters ........................................................................................................................................ 5 Activated carbon In Line filters ......................................................................................................................... 9
In-line type empty cartridges Code: 07003001
In line empty filter 1/4" FPT Clear 2"x10" (25)
Empty cartridge for mineral. The mineralizer filter neutralises the water acidity by means of magnesium and/or calcium alkaline ions. It's adequate between the exit of the R.O. System and the water faucet. The presence of calcium and magnesium oxides causes high values of pH, that will normalize successively. Wash the filter before switch on the system. Code: 07003002
In line empty filter 1/4" FPT withe 2"x10" (25)
Empty cartridge for mineral. The filter remineralisation neutralize the possible acidity of the drinkable water with alkali ions of calcium and /or magnesium. particularly right in Output of system of reverse osmosis before of the eater's taking. For the presence of calcium and magnesium, caused by the thermic's treatment, the first hours of the Filter's work loaded with minerals, indicate the high values of PH, after it come back normal. Before to start the work, do you have to wash often the filter, then you can start the work without interruptions.
19 June 2014
3/16
Code: 07003003
In line empty filter 1/4" FPT withe 2,5"x12" (25)
Empty cartridge for mineral. The mineralizer filter neutralises the water acidity by means of magnesium and/or calcium alkaline ions. It's adequate between the exit of the R.O. System and the water faucet. The presence of calcium and magnesium oxides causes high values of pH, that will normalize successively. Wash the filter before switch on the system.
In Line Mineral Filters post osmosis Code: 07004001
Green Filter remineralizer PH adjustment in line filter (GAC) 1/4" FPT 2"x10" (25)
Postfilter for osmosis composed from: 40% Calcite + 40% carbon GAC + 20% magnesium Corosex® Life range: 6 months Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Proportion that releases the filter 2:1 (2x calcite / 1 x corosex) Code: 07004002
Far-infrared mineral ball post osmosis in line filter 1/4" FPT 2"x10" (25)
19 June 2014
4/16
The water passes through the infrared filter has a very positive impact on human health because of the activity of somatic cells, improves blood circulation and speeds up the metabolism. Specifications -In-line filter 10 "x 2" -In-Out-1 / 4 "NPT -High-pressure-125 psi -Max-flow-0, 6 gpm Beneficial effects on humans. -Active the water molecules in our body. -Improve the level of oxygen in our body. -remove grease, chemicals, toxins from our blood and this facilitates the flow of blood. -Reduces the level of acidity in our body -Improving the functions of our nervous system. The granules bio-ceramics inside are produced with different kinds of ceramic mixed with mineral oxides such as silicon oxide (SiO2), aluminum oxide (Al2O2), etc.. Mixing of these materials emits FIR (infrared). Far infrared mineralized is made of 26 types of ceramic with various mineral oxides and heated together at 1600 째 C and quickly cooled. After cooling this bio-ceramic gets the ability to emit infrared rays. FIR (infrared) are also used to: -Prevention of bacteria -Water-softening -Eliminate odors in water -Air-Purification -Balanceof the acid level in your body -Normalization of blood cholesterol -It keeps the body young -Help plants grow better
Sediment In line filters Code: 07001001
Sediment in line filter 5 micron 1/4'' FPT 2''x10'' - 5 micron (25)
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38째C./100째F. * Service Life: 5.700 liters/1.500 gallons.
19 June 2014
5/16
Code: 07001008
CL10 PF5 Sediment in line filter 5 micron 1/4'' FPT 2''x10'' - 5 micron (25)
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 1,9lpm/0,5gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. * Service Life: 5.700 liters/1.500 gallons. Code: 07001009
Green Filter sediment in line filter 1/4'' J.G. 2''x10'' - 5 micron (25)
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,69 gpm - 2,61 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
19 June 2014
6/16
Code: 07001002
Sediment in line filter 1/4'', 3/8" FPT 2,5''x12'' - 5, 10 micron (25)
Variants Code
Description
07001002-01 07001002-02 07001002-04 07001002-03
Sediment in line filter 1/4'' FPT 2,5''x12'' - 5 micron (25) Sediment in line filter 1/4" FPT 2,5''x12'' - 10 micron (25) Sediment in line filter 3/8" FPT 2,5''x12'' - 5 micron (25) Sediment in line filter 3/8" FPT 2,5''x12'' - 10 micron (25)
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. * Service Life: 9.500 liters/2.500 gallons. Code: 07001004
Green Filter Sediment in line filter 1/4'' FPT 2,5''x12'' - 5 micron (25)
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
19 June 2014
7/16
Code: 07001005
Green Filter CS Sediment in line filter 3/8'' OD stem 2,5''x10,5'' 5 micron (25)
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Code: 07001006
T33 Sediment in line filter 1/4'' FPT 2,5''x12'' - 5 micron (25)
Applications: Reverse Osmosis(RO) Pre-Filtration. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment from water. Polypropylene Sediment filters are highly effective for filtering and removing solid particles that flow through our Water. They do not remove chemicals or contaminants, only the solids from wells or water lines that have dirt, rust or suspended matter. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. * Service Life: 9.500 liters/2.500 gallons. Code: 07001007
Green Filter classic sediment in line filter 1/4'' FPT 2,5''x11'' - 5 micron (20)
19 June 2014
8/16
Sediment removal. Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Code: 07001010
Green Filter sediment in line filter 1/4'' J.G. 2,5''x11'' - 5 micron (25)
Sediment removal. In/out: 1/4" quick connection Starfit (John Guest type) Service life: 1 year - 3.000 gal. - 11.340 liters Maximum flow: 1 gpm - 3,78 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Activated carbon In Line filters Code: 07002001
Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Granular active Carbon manufactured by means of physic activation of mineral source selected raw material. It's incisive for the obliteration of organic pollutants, colorants, pesticides, solvents, phenols, tannins and chlorine that cause stench and bad taste in the water. It's able for the purification of the water fit for human consumption, of the waste water, of the process water and of condensates. It's adequate at the UNI ISO EN 12915 standard. When its absorbent capacity was exhausted it can be reactivated by heat.
19 June 2014
9/16
Code: 07002002
Granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x12" (25)
Granular active Carbon manufactured by means of physic activation of mineral source selected raw material. It's incisive for the obliteration of organic pollutants, colorants, pesticides, solvents, phenols, tannins and chlorine that cause stench and bad taste in the water. It's able for the purification of the water fit for human consumption, of the waste water, of the process water and of condensates. It's adequate at the UNI ISO EN 12915 standard. When its absorbent capacity was exhausted it can be reactivated by heat. Code: 07002008
Carbon Block in line filter (CB) 1/4" FPT 2"x10" (25)
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon Filter)& to ensure 100% of chlorine removal. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38째C./100째F. * Service Life: 5.700 liters/1.500 gallons.
19 June 2014
10/16
Code: 07002003
Carbon Block in line filter (CB) 1/4", 3/8" FPT 2,5"x12" 5, 10 micron (25)
Variants Code
Description
07002003-01 07002003-02 07002003-03
Carbon Block in line filter (CB) 1/4" FPT 2,5"x12" - 5 micron (25) Carbon Block in line filter (CB) 1/4" FPT 2,5"x12" - 10 micron (25) Carbon Block filter (CB) 3/8" FPT 2,5"x12" - 10 micron (25)
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon Filter)& to ensure 100% of chlorine removal. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38째C./100째F. * Service Life: 9.500 liters/2.500 gallons. Code: 07002013
Carbon Block in line filter coconut (CB) 1/4" FPT 2,5"x12" 10 micron (25)
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block coconut water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. This carbon has higher power adsorbent for reducing odors and tastes in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon Filter)& to ensure 100% of chlorine removal. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38째C./100째F. * Service Life: 9.500 liters/2.500 gallons.
19 June 2014
11/16
Code: 07002004
Green Filter Granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Code: 07002012
Green filter classic granular activated post carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
Carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Code: 07002005
Green Filter Bacteriostatic Granular activated carbon in line filter (GAC) 1/4" FPT 2"x10" (25)
19 June 2014
12/16
Bactereostatic silver carbon postfilter, taste and odor reduction. Service life: 1 year - 1.500 gal. - 5.678 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C The contents of this filter is made in USA by Calgon. Code: 07002006
Green Filter Granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x12" (25)
Carbon prefilter, taste and odor reduction. Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Code: 07002011
Green Filter classic granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x11" (20)
Carbon prefilter, taste and odor reduction. Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 40°F - 4°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
19 June 2014
13/16
Code: 07002007
Green Filter CS granular activated carbon in line filter 3/8'' OD stem 2,5''x10,5''(25)
Calgon NSF carbon prefilter, taste and odor reduction. Service life: 1 year - 2.000 gal. - 7.560 liters Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 100°F - 38°C Minimum temperature: 35°F - 2°C Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Code: 07002009
T33 Carbon block in line filter 1/4'' FPT 2,5''x12'' - 5 micron (25)
Removes smells, tastes, and chlorine from your water that contribute to taste and odor. Specifications: Carbon Block water Filters use a combination of physical and chemical filtering to capture harmful organisms and chemicals found in water. The effectiveness of carbon block water filters is based on the size of the particles -measured in microns- that the filter can capture. Post-Filtering in Line CTO Filters remove small particles and carbon fines that may pass from second stage (GAC Granulated Carbon Filter)& to ensure 100% of chlorine removal. Technical Features: Max. Flow: 2,8lpm/0,75gpm * Max. Pressure: 8bar * Max. Temperature: 38°C./100°F. * Service Life: 9.500 liters/2.500 gallons.
19 June 2014
14/16
Code: 07002010
CL12-GAC-S Bacteriostatic Granular activated carbon in line filter (GAC) 1/4" FPT 2,5"x11" (25)
Bactereostatic silver carbon filter, taste, odor and bacteria control. Service life: 1 year - 1.795 gal. - 6.800 liters. Maximum flow: 0,5 gpm - 1,9 lt/min. Maximum pressure: 125 psi - 8,6 bar Maximum temperature: 95째F - 35째C Minimum temperature: 35째F - 2째C
19 June 2014
15/16
Powered by TCPDF (www.tcpdf.org)