PLAN SERIES DATE 27.03.2020 FOR CONSTRUCTION DRAWING
THE LORD RAMA 9 7948
FOR CONSTRUCTION
INTERIOR WORKING DRAWING
DRAWING LIST DWG.NO.
DRAWING LIST
DESCRIPTION
DWG.NO.
COVER SERIES
Copyright
DRAWING LIST
DESCRIPTION
DWG.NO.
© THE BEAUMONT PARTNERSHIP 2009
NOTES
DESCRIPTION
DWG.NO.
ID-L06-2101
SET OUT PLAN
LEVEL 06
ID-L36M-2101
SET OUT , PARTITION PLAN
LEVEL 36 (MEZZANINE) LEVEL 36 (MEZZANINE)
ID-0000
COVER SERIES
ID-L06-2102
PARTITION PLAN
LEVEL 06
ID-L36M-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
ID-0001
LIST OF DRAWING & DESCRIPTION
ID-L06-2103
REFLECTED CEILING PLAN
LEVEL 06
ID-L36M-2103
POWER OUTLET PLAN
LEVEL 36 (MEZZANINE)
LIST OF DRAWING & DESCRIPTION
ID-L06-2104
POWER OUTLET PLAN
LEVEL 06
ID-L36M-2104
WALL FINISHES PLAN
LEVEL 36 (MEZZANINE)
FIXED DECORATION WORK SPECIFICATION
ID-L06-2105
FLOOR FINISHES PLAN
LEVEL 06
ID-L06-2106
WALL FINISHES PLAN
LEVEL 06
ID-0002
KEY PLAN SERIES ID-K01-2001
KEY PLAN
LEVEL B1
ID-L07-2101
FURNITURE PLAN
LEVEL 07
ID-K01-2002
KEY PLAN
LEVEL 01
ID-L07-2102
SET OUT PLAN
LEVEL 07
ID-K02-2003
KEY PLAN
LEVEL 02
ID-L07-2103
PARTITION PLAN
LEVEL 07
REFLECTED CEILING PLAN
LEVEL 07
ID-K03-2004
KEY PLAN
LEVEL 03
ID-L07-2104
ID-K04-2005
KEY PLAN
LEVEL 04
ID-L07-2105
POWER OUTLET PLAN
LEVEL 07
FLOOR FINISHES PLAN
LEVEL 07
WALL FINISHES PLAN
LEVEL 07
ID-K05-2006
KEY PLAN
LEVEL 05
ID-L07-2106
ID-K06-2007
KEY PLAN
LEVEL 06
ID-L07-2107
ID-K07-2008
KEY PLAN
LEVEL 07
ID-K08-2009
KEY PLAN
LEVEL 08
ID-L08-2101
DESCRIPTION
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
SET OUT , PARTITION PLAN
LEVEL 08
:
ID-K09-2010
KEY PLAN
LEVEL 09-16
ID-L08-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 08
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ID-K17-2011
KEY PLAN
LEVEL 17
ID-L08-2103
POWER OUTLET PLAN
LEVEL 08
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
ID-K18-2012
KEY PLAN
LEVEL 18-21
ID-L08-2104
WALL FINISHES PLAN
LEVEL 08
ID-K22-2013
KEY PLAN
LEVEL 22
ID-K23-2014
KEY PLAN
LEVEL 23
วิศวกรงานระบบ
:
ID-L09-2101
SET OUT , PARTITION PLAN
LEVEL 09-16
KEY PLAN
LEVEL 24
ID-L09-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 09-16
ID-K25-2016
KEY PLAN
LEVEL 25
ID-L09-2103
POWER OUTLET PLAN
LEVEL 09-16
ID-K26-2017
KEY PLAN
LEVEL 26
ID-L09-2104
WALL FINISHES PLAN
LEVEL 09-16
ID-K27-2018
KEY PLAN
LEVEL 27-33
ID-K34-2019
KEY PLAN
LEVEL 34-35
ID-L17-2101
SET OUT , PARTITION PLAN
LEVEL 17
ID-K36-2020
KEY PLAN
LEVEL 36
ID-L17-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 17
LEVEL 36 (MEZZANINE)
ID-L17-2103
POWER OUTLET PLAN
LEVEL 17
ID-L17-2104
WALL FINISHES PLAN
LEVEL 17
LEVEL 18-21
KEY PLAN
:
MECHANICAL ENGINEERS :
ID-K24-2015
ID-K36M-2021
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
PLAN SERIES ID-L00-2101
SET OUT PLAN
LEVEL B1
ID-L18-2101
SET OUT , PARTITION PLAN
ID-L00-2102
PARTITION PLAN
LEVEL B1
ID-L18-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 18-21
POWER OUTLET PLAN
LEVEL 18-21
WALL FINISHES PLAN
LEVEL 18-21
ID-L22-2101
SET OUT , PARTITION PLAN
LEVEL 22
ID-L22-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 22
LEVEL 01
ID-L22-2103
POWER OUTLET PLAN
LEVEL 22
ID-L22-2104
WALL FINISHES PLAN
LEVEL 22
ID-L00-2103
REFLECTED CEILING PLAN
LEVEL B1
ID-L18-2103
ID-L00-2104
POWER OUTLET PLAN
LEVEL B1
ID-L18-2104
ID-L00-2105
FLOOR FINISHES PLAN
LEVEL B1
ID-L00-2106
WALL FINISHES PLAN
LEVEL B1
ID-L01-2101
SET OUT PLAN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ID-L01-2102
PARTITION PLAN
LEVEL 01
ID-L01-2103
REFLECTED CEILING PLAN
LEVEL 01
ID-L01-2104
POWER OUTLET PLAN
LEVEL 01
ID-L23-2101
SET OUT , PARTITION PLAN
LEVEL 23
ID-L01-2105
FLOOR FINISHES PLAN
LEVEL 01
ID-L23-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 23
Consultant 2 Discipline
ID-L01-2106
WALL FINISHES PLAN
LEVEL 01
ID-L23-2103
POWER OUTLET PLAN
LEVEL 23
:-
ID-L23-2104
WALL FINISHES PLAN
LEVEL 23
Consultant 1 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
MF. MF. MF. MF. MF. MF. App'd
:Consultant 3 Discipline
:-
:-
ID-L02-2101
SET OUT PLAN
LEVEL 02
ID-L02-2102
PARTITION PLAN
LEVEL 02
ID-L24-2101
SET OUT , PARTITION PLAN
LEVEL 24
ID-L02-2103
REFLECTED CEILING PLAN
LEVEL 02
ID-L24-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 24
ID-L02-2104
POWER OUTLET PLAN
LEVEL 02
ID-L24-2103
POWER OUTLET PLAN
LEVEL 24
::-
ID-L02-2105
FLOOR FINISHES PLAN
LEVEL 02
ID-L24-2104
WALL FINISHES PLAN
LEVEL 24
::-
ID-L02-2106
WALL FINISHES PLAN
LEVEL 02
Other Party 2 Responsibility
Other Party 1 Responsibility
ID-L25-2101
SET OUT , PARTITION PLAN
LEVEL 25
ID-L03-2101
SET OUT PLAN
LEVEL 03
ID-L25-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 25
ID-L03-2102
PARTITION PLAN
LEVEL 03
ID-L25-2103
POWER OUTLET PLAN
LEVEL 25
ID-L03-2103
REFLECTED CEILING PLAN
LEVEL 03
ID-L25-2104
WALL FINISHES PLAN
LEVEL 25
ID-L03-2104
POWER OUTLET PLAN
LEVEL 03
ID-L03-2105
FLOOR FINISHES PLAN
LEVEL 03
ID-L26-2101
SET OUT , PARTITION PLAN
LEVEL 26
ID-L03-2106
WALL FINISHES PLAN
LEVEL 03
ID-L26-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 26
ID-L26-2103
POWER OUTLET PLAN
LEVEL 26
ID-L26-2104
WALL FINISHES PLAN
LEVEL 26
ID-L04-2101
SET OUT PLAN
LEVEL 04
ID-L04-2102
PARTITION PLAN
LEVEL 04
ID-L04-2103
REFLECTED CEILING PLAN
LEVEL 04
ID-L27-2101
SET OUT , PARTITION PLAN
LEVEL 27-33
ID-L04-2104
POWER OUTLET PLAN
LEVEL 04
ID-L27-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 27-33
ID-L04-2105
FLOOR FINISHES PLAN
LEVEL 04
ID-L27-2103
POWER OUTLET PLAN
LEVEL 27-33
ID-L04-2106
WALL FINISHES PLAN
LEVEL 04
ID-L27-2104
WALL FINISHES PLAN
LEVEL 27-33
::::Client
::::Project
THE LORD RAMA 9
Drawing title
ID-L05-2101
SET OUT PLAN
LEVEL 05
ID-L34-2101
SET OUT , PARTITION PLAN
LEVEL 34-35
LIST OF DRAWING & DESCRIPTION
ID-L05-2102
PARTITION PLAN
LEVEL 05
ID-L34-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 34-35
ID-L05-2103
REFLECTED CEILING PLAN
LEVEL 05
ID-L34-2103
POWER OUTLET PLAN
LEVEL 34-35
-
ID-L05-2104
POWER OUTLET PLAN
LEVEL 05
ID-L34-2104
WALL FINISHES PLAN
LEVEL 34-35
ID-L05-2105
FLOOR FINISHES PLAN
LEVEL 05
ID-L05-2106
WALL FINISHES PLAN
LEVEL 05
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NTS.
ID-L36-2101
SET OUT , PARTITION PLAN
LEVEL 36
ID-L36-2102
REFLECTED CEILING ,FLOOR FINISHES PLAN
LEVEL 36
Project number
Drawing number
Revision
ID-L36-2103
POWER OUTLET PLAN
LEVEL 36
7948
ID-0001
A
ID-L36-2104
WALL FINISHES PLAN
LEVEL 36
@ A2 sheet size
35 mm. on original
Status
FOR CONSTUCTION
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
SYMBOL
SYMBOL
SYMBOL
SYMBOL
DESCRIPTION
ชื่อห้อง
ROOMNAME A FFL +0 050 SSL0 000 FF 04
ชื่อห้อง ROOMNAME ROOM NUMBER FLOOR FINISH FLOOR STRUCTURE FLOOR FINISHES NUMBER
DESCRIPTION
SYMBOL
DESCRIPTION
EXISTING ( SECTION )
FLOOR ( SECTION )
MASONRY WALL ( SECTION )
PLASTER.BOARD ( SECTION )
INSULATION ( SECTION )
CONCRETE ( SECTION )
STONE ( SECTION )
FOAM / PLASTIC ( SECTION )
GLASS ( SECTION )
GLASS ( ELEVATION )
N SHOW NORTH DIRECTION
ELEVATION ELEVATION NUMBER
01 ID-XX-3001
OWNERS : เจ้าของ
SHEET NUMBER
SHOW SECTION LINE
SHEET NUMBER
SOLID TIMBER ( SECTION )
WOOD PACKER ( SECTION )
ALUMINUM ( SECTION )
PLYWOOD / CEMENT BOARD ( SECTION )
CEILING CODE
CL:01
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
CEILING SYMBOL
CH.+3000
:
ARCHITECTS : สถาปนิก :
ELEVATION NUMBER
01 ID-XX-3001
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
HEIGHT CEILING
วิศวกรงานระบบ
:
:
ACOUSTIC BOARD ( SECTION )
PARTITION SYMBOL
MDF BOARD ( SECTION )
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
P-XX
PARTITION CODE
Key Plan
WALL SYMBOL
WALL CODE
DETAIL SYMBOL ELEVATION NUMBER
01 ID-XX-5000
SHEET NUMBER E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFERENCE, RL SECTIONSPOT FFL.+0.000
BOUNDARY LINES
:-
REFERENCE, SLOPE / SLIDE SLOPE 1:200
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
SLIDE
:Consultant 2 Discipline
REFERENCE CENTER LINE
REFERENCE SETOUT SET OUT
C L
CENTER LINE
:Consultant 1 Discipline
:Other Party 2 Responsibility
GRID NUMBER
::-
1
VERTICAL GRID LINE
::Other Party 1 Responsibility
A
HORIZONTAL GRID LINE
::::-
0 000
DIMENSION - CENTER TO CENTER
0 000 0 000
Client
DIMENSION - CENTER TO SIDE
::-
DIMENSION - SIDE TO SIDE
::Project
THE LORD RAMA 9
DOOR SYMBOL DOOR CODE
DR:00
DOOR Drawing title
WINDOW SYMBOL WINDOW CODE
SYMBOLS
Date generated
WD:01
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
WINDOW
NTS. @ A2 sheet size
35 mm. on original
Project number
Drawing number
Revision
7948
ID-0002
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
FIXED DECORATION WORK SPECIFICATION 1.00 GENERAL NOTES
12.00 COLOR WORK
1.01 All works shall be carried out in a neat, clean, and organized manner. 1.02 Contractor shall provide all tools necessary for the completion of the works. 1.03 Contractor shall ensure that the working area is properly contained in a manner not to obstruct access, or convenience for work by Others. 1.04 Contractor shall be responsible for the works and must take all necessary protective measures to ensure against damage to the works.
12.01 Spray Color - Apply shellac thoroughly and sand with fine sandpaper. Dust off and apply one full coat of spray color, dry completely and sand smooth with fine sandpaper. Apply three coats of final spray color. 12.02 On MDF ensure that the surface shall be clean, dry and smooth prior to paint application. Apply one coat of primer and let dry. Apply one undercoat of paint. Apply two coats of final emulsion paint color coat. 12.03 Natural Wood Grain - Must be coated with shellac, exposed surface of finish work shall be dressed smooth, and sanded with fine sandpaper. Dust smooth and apply three coats of shellac, then apply lacquer finish as specified. 12.04 Wood Stain - Wash finish wood surface with care and dry clean. Sand smooth with fine sandpaper, wash clean, and dry. Apply two coats of wood stain to surface, dry and sand smooth, then apply lacquer finish as specified. 12.05 Lacquer Finish - Wash finish surface and dry clean. Apply two coats of "isocyanide lacquer" then sand smooth, then apply two more coats. Dry for at least five (5) hours then coat with "olisand" and rub smooth with fine grit steel wool. Clean and clear with water.
2.00 WORKMANSHIP 2.01 All works must be installed plumb and level, unless otherwise noted in drawings. 2.02 All joints must be perfectly flushed and smooth. 2.03 All surfaces must be sanded smooth and free of burrs before final surface finishing.
OWNERS : เจ้าของ
3.00 WOOD WORK 13.00 GRANITE & MARBLE FLOOR 3.01 All finishing wood shall be grade A quality, without any sap knots, which will cause the damage to finish surfaces. 3.02 All wood shall be of good quality and suitable for all kinds of work. Wood pieces are to be cut in the same regular lengths. In conditions where wood pieces are connected by joints, all timber joints to be clean and neat. 3.03 Seasoned and Dry - All wood used in furniture must be properly seasoned and dry before use. 3.04 All wood shall be treated against insects and protected accordingly. 3.05 In case of wood damage by bending, twisting, or warping, Contractors have full responsibility for such damage. 3.06 In cases where the wood needs to be repaired, cracks and holes must be properly filled with the same type of wood and concealed seamlessly before final surface finishing. 3.07 Dowel jointing - For dowel joint method in wood work, a hardwood must be used in the "dovetail" method. 3.08 All wood work must follow drawings, including framing works and method of installation. 4.00 WOOD VENEER 4.01 Wood veneer used must be free from frame shakes, excessive knots, and insects. 4.02 Any wood veneer that has joints, must use a matching joint strip of the same kind of veneer wood. 4.03 Glue used for veneer application should be polyvinyl acrylic (PVA) type, that is suitable for the works. Any other kinds of glues should be approved for use.
5.00 PLASTIC LAMINATE 5.01 5.02 5.03 5.04
Use imported plastic laminate materials as specified by Designer, or as indicated in drawings. Contractor must provide samples for approval. Glue used for application of plastic laminate should be Dunlop glue, or approved equal. Unless otherwise noted, plastic laminate should be properly adhered to 10mm thk. plywood backing.
6.00 PLYWOOD 6.01 Use Elephant Brand plywood, or as specified in drawings. 6.02 Wood frames for plywood structure shall use Yom Hom wood, Sayaa wood or Tabak wood, unless otherwise noted.
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
:
ARCHITECTS : สถาปนิก :
13.01 13.02 13.03 13.04 13.05
All granite and marble natural cut stone shall be as specified. Contractor shall provide suitable samples to determine range of approved stone variations. All granite and marble shall be level, of uniform thickness, and free of surface defects. All granite and marble shall be cut according to sizes, patterns, and color scheme as indicated in drawings. Installation of granite and marble shall be first class workmanship and shall be laid according to drawings and by specified method of installation.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
14.00 CEILING WORK
:
INTERIOR DESIGNER :
14.01 Gypsum board ceiling shall be a minimum 9mm thickness and must be mounted on a metal suspension system consisting of sections as indicated in drawings. All sections and accessories such as hangers, splices, hanger clips and bolts shall be standard manufacturer products. Installation shall be as recommended by manufacturer. Joints and nail spots shall be repaired and made good prior to attempting painting. 14.02 Wood panel ceiling shall follow specifications as covered under wall paneling.
วิศวกรงานระบบ
:
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
15.00 FURNITURE & JOINERY WORK 15.01 Wood Frame - Wood framing in joinery to use hardwood frame as the same material as plywood in cases where this is clearly visible. Unless otherwise noted, use Yom Hom wood, Sa Yaa wood, Ta Bak wood, or Ta kian wood. 15.02 Carcass - Furniture carcass and shell to use the same kinds of plywood for exterior and interior faces, as indicate in the drawings. 15.03 Top Surface - Furniture thickness for plywood shall not be less than 10mm, unless otherwise noted. Top surface shall be fixed and mounted on hardwood frame. 15.04 Color and Surface - In case of using natural wood, choose a wood panel that matches in color and grain pattern. Paint color used for furniture shall be matched to approved sample as shown. For wood stain, Contractors shall match wood stain samples as approved by Designer only. 15.05 Cabinet Doors and Drawer Faces - Use plywood on both faces properly fixed on hardwood frame, with thickness only as indicated in drawings. Size and shape of hardwood frame only as indicated in drawings. 15.06 Adjustable Shelf - Both sides to use plywood, top side shall be no less than 6mm thick, bottom side no less than 3mm thick, unless otherwise noted. Shelf to be mounted on hardwood frame, as indicated in drawings.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
MF. MF. MF. MF. MF. MF. App'd
:Consultant 3 Discipline
:7.00 GLASS
Consultant 2 Discipline
:7.01 7.02 7.03 7.04 8.00 8.01 8.02 8.03 8.04
All glass shall be specified as Grade A, without distortions or bubbles, and free of any surface defects. All glass used needs to have a brand name, type of glass, and thickness as specified in drawings. All glass cutting works shall be of first class workmanship. Unless otherwise noted, silicone or putty for glass work has to be heat proof.
- the materials which are included in interior scope should have registional contents and recycle contents (as much as possible). - the adhesives , sealants, primers, painting, coating, and waterproofing which are included in interior scope must be complied with vocs requirements in ieqc4.1 and 4.2.
MIRROR All mirrors shall be specified as Grade A, distortion free, and cut precisely as per drawings. All mirrors should be a local specification from TGSG, or approved equal The minimum thickness for mirrors must be at least 6mm thick. Unless otherwise noted, all mirrors should be properly adhered to 10mm thk. plywood backing.
9.00 STEEL WORK 9.01 9.02 9.03 9.04
Steel works and screws must be made from the same material. All the steel works to be matched in finish and material. All welding works must be done in a neat and clean manner, with no excess welding material on the finished weld Any surface defects in other materials caused by welding shall be the responsibility of the Contractor to repair or replace and shall be done at cost to Contractor. All steel materials and frames that require use of a truss, must use light grade steel.
Consultant 1 Discipline
:Other Party 2 Responsibility
::::Other Party 1 Responsibility
::::Client
::::Project
THE LORD RAMA 9
10.00METAL WORK 10.01 10.02 10.03 10.04 10.05 10.06
All metals in use shall be specified as Grade A. All metals shall be brand new, free from rust, and with no visible fissures, cracks, dents, or scratches. All metal works that are on the floor must have a rubber padding on the bottom surface. All the metal jointing shall be done with a proper welding machine. All welds shall be of first class workmanship, with all weld joints to be dressed smooth. Welding work needs to be neat and clean, without any burns, cracks, or defects arising from workmanship.
11.00 WALL COVERING
Drawing title
FIXED DECORATION WORK SPECIFICATION
Date generated
11.01 11.02 11.03 11.04 11.05
All wall covering materials, such as vinyl or wall paper, shall be specified as per drawings. Contractors must cover nail holes and screwhead fixings, smoothen surface, and apply one coat of primer paint before wall covering finish All wall covering must be applied flush and smooth with no visible seam joints between panels. All internal and external corners to wall covering finish should be crisp and clean. Wall covering installation shall be of first class workmanship.
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NTS. @ A2 sheet size
35 mm. on original
Project number
Drawing number
Revision
7948
ID-0003
A
Status
FOR CONSTUCTION
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
-
1
2
3
4
5
6
7
8
ID-TYP-4001
แนวเขตที่ดิน
85000 8500
แนวเขตที่ดิน
8500
8500
8500
8500
8500
8500
8500
9
10 8500 850
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
STO.
INTERIOR DESIGNER : FEMALE
มัณฑนากร
:
LANDSCAPE DESIGNER :
B
1000
A
ภูมิสถาปนิก
:
Key Plan
C2 C1
C1
191 sq.m. RETAIL AREA 1
FEMALE
C2
111 sq.m.
198 sq.m.
RETAIL AREA 2
RETAIL AREA 3
8500
NOT IN ID SCOPE UP
E
E
FHC.
RAMP C2
C1
ID-TYP-5402
1
C
ID-TYP-5403 2
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
RECYCLE BIN
UP
ID-TYP-5401
CORRIDOR
JO-02
JO-02 ID-TYP-7002 ID-TYP-7002
ID-TYP-5404
C3
3 4
C1
C1
C3
DISABLED LIFT
6
C2
7
DASHLINE OF 2 FL. FLOOR LEVEL
8
STAIR
5
C1
9
ID-TYP-4001
:-
+1.50 m LANDING
Control Door
Consultant 3 Discipline
3
4
5
6
7
8
9
UP
ESCALATOR
LIFT HALL 2
HALL
1
27500 8500
DN UP
NOT IN ID SCOPE SERVICE ROOM
DN UP
:-
PLAZA
ID-TYP-5404
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
8
9
Consultant 2 Discipline
5
6
7
:-
4 3
:-
1
D
Consultant 1 Discipline
2
ID-TYP-4001
Other Party 2 Responsibility
C1
C2
C3
CORRIDOR
E
-
::-
STAIR
ID-TYP-4101 ID-TYP-4101
FHC.
E 8500
UP
NOT IN ID SCOPE
57 sq.m.
136 sq.m.
108 sq.m.
106 sq.m.
RETAIL AREA 4B
RETAIL AREA 4A
RETAIL AREA 5
RETAIL AREA 6 +1.35 m
E
C1
C1
C1
+1.50 m
C2
C2
E
::Client
SLOPE 1:8
SLOPE 1:8
F
::-
SLOPE 1:8
1400
SLOPE 1:8
RETAIL AREA 8
RETAIL AREA 7
Other Party 1 Responsibility
+0.40 m
150 sq.m.
116 sq.m.
+1.20 m
::-
1200
C1
+0.80 m MEP ROOM
RAILING: STAINLESS STEEL Ø50 MM.
C1
3000
C1
1000
แนวเขตที่ดิน
LIFT
1800
::::Project
20
NOT IN ID SCOPE
2200
E
E
E
แนวเขตที่ดิน
THE LORD RAMA 9
1200 1200 1200
E
E
REMARK :
Drawing title
ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER
KEY PLAN LEVEL B1 -
TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING
Date generated
01 -
KEY PLAN : LEVEL (B1 FL.) SCALE
1:175
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:175 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K01-2001
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
8
85000 8500
แนวเขตที่ดิน 8500
8500
8500
8500
8500
8500
8500
FEMALE
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
VENT.
B
:
1000
A
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
DISABLE
SPIRIT HOUSE
C2 C1
C1
:
C2 -
C1
TERRACE
ID-TYP-4206
130 sq.m.
112 sq.m.
RETAIL AREA 9
RETAIL AREA 10
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
:
CH BE N
8500
BE NC H
-
INTERIOR DESIGNER :
DN
JO-02
Key Plan
UP
C1 ID-TYP-5401
C HAND-RAIL
C1
E
C1
C3
ID-TYP-5402
ID-TYP-5403
E
C1
E C2
C3
H
LIFT UP
UP
-
ID-TYP-5106
HALL
LIFT HALL
HALL
ID-TYP-4103,4105
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ID-TYP-4001
-
UP UP
UP
RECYCLE BIN
BENC
UP UP
27500 8500
CORRIDOR ID-TYP-4002
C2
HAND-RAIL
UP UP
VOID
LIFT
UP
FD. FD.
DN
HAND-RAIL
CORRIDOR AREA
แนวเขตที่ดิน
UP
391.28 sq.m.
UP
FD. FD.
Consultant 3 Discipline
:-
D
C1 UP
E
C1
Consultant 2 Discipline
UP
C1
C2
C3
:-
CORRIDOR
Consultant 1 Discipline
UP
UP
FHC.
:-
78 sq.m. 8500
RETAIL AREA 13
Other Party 2 Responsibility
UP
UP
::-
NOT IN ID SCOPE 80 sq.m.
DN
MEP
::-
shaft
RETAIL AREA 14
Other Party 1 Responsibility
::-
MEP
::-
1000
Client
E
::-
STAFF OFFICE
F
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
HAND-RAIL
E
ภูมิสถาปนิก
:
FHC.
B
LANDSCAPE DESIGNER :
UP
UP
มัณฑนากร
:
NOT IN ID SCOPE
ID-TYP-7002
BOUNDARY RETAIL AREA LINE
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
shaft
ID-TYP-4107
วิศวกรงานระบบ
:
MEP
UP
MECHANICAL ENGINEERS :
MALE
User 0
User 0
::Project
THE LORD RAMA 9 12 -
แนวเขตที่ดิน REMARK :
TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER
Drawing title
KEY PLAN LEVEL 01 Date generated
01 -
KEY PLAN : LEVEL 01 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K01-2002
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8
85000 8500
8500
8500
8500
8500
8500
8500
8500
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง MALE
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
1
:
B
MECHANICAL ENGINEERS :
1000
A
วิศวกรงานระบบ
: FEMALE
C2 C1
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
:
C1
INTERIOR DESIGNER :
-
มัณฑนากร
:
ID-TYP-4211
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
295 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 15
RETAIL AREA 16
RETAIL AREA 17
MEP Shaft
MEP
DN
Shaft
8500
JO-02
Key Plan
NOT IN ID SCOPE
ID-TYP-7002
UP
MEP Shaft
FHC.
C1 ID-TYP-5401
C
C1
OPEN TO BELOW
C1
C2
C3
ID-TYP-5402
ID-TYP-5403
E
C1
CORRIDOR
ID-TYP-4002
UP
E
C2
DN
LIFT
RECYCLE BIN
ACCESS CONTROL POINT
C3
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27
E LIFT
169 sq.m.
UP
UP
27500 8500
RETAIL AREA 18
ID-TYP-4001
OPEN LIFT HALL
E
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA 345.76 sq.m.
Consultant 2 Discipline
:-
D
Consultant 1 Discipline
C1
C1
C1
RAMP
C2
C3
ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
:-
CORRIDOR
Other Party 2 Responsibility
E
FHC.
::::-
8500
UP
NOT IN ID SCOPE
Other Party 1 Responsibility
::-
DN RECEPTION
MEP Shaft
::-
OPEN TO BELOW
Client
E F
1000
63
64
::::-
E
NOT IN ID SCOPE
Project
RMU.1 / MEA ROOM
THE LORD RAMA 9
Drawing title
KEY PLAN LEVEL 02 Date generated
01 -
KEY PLAN : LEVEL 02 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K02-2003
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8
85000 8500
8500
8500
8500
8500
8500
8500
8500
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MALE MALE
1
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
B
:
1000
A
MECHANICAL ENGINEERS :
C2 C1
C1
FEMALE FEMALE
C2
C1
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
MEP
-
วิศวกรงานระบบ
:
Shaft
:
INTERIOR DESIGNER :
ID-TYP-4211
มัณฑนากร
:
86 sq.m.
LANDSCAPE DESIGNER :
RETAIL AREA 21
112 sq.m.
RETAIL AREA 19
RETAIL AREA 20
DN
MEP
JO-02
MEP
ID-TYP-7002
UP
Shaft
FHC.
LIFT
RECYCLE BIN
Key Plan
NOT IN ID SCOPE
Shaft
ภูมิสถาปนิก
:
Shaft
MEP
8500
295 sq.m.
DN
ID-TYP-4002
UP
C OPEN TO BELOW
C1
C1
E
C1
E
C2
ACCESS CONTROL POINT
C3
27
E
27500 8500
UP
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT
OPEN 184 sq.m.
LIFT HALL HALL LIFT
ID-TYP-4001
RETAIL AREA 22 DN
E
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
CORRIDOR AREA 347.46 sq.m.
D
C1
E
C1
ACCESS CONTROL POINT
C1
C2
C3
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
:Consultant 2 Discipline
:C1
ACCESS
C2
C3CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
:-
CORRIDOR
CORRIDOR
E
8500
FHC.
MEP Shaft
MEP 100 sq.m.
227 sq.m.
81 sq.m.
RETAIL AREA 24
RETAIL AREA 23
Consultant 1 Discipline
RAMP
Shaft
MEP Shaft
DN
Other Party 2 Responsibility
::-
UP
::-
NOT IN ID SCOPE
Other Party 1 Responsibility
DN
::-
RETAIL AREA 25
::-
63
F
C1
64
Client
::-
1000
E
C1
::-
C2
C2
Project
NOT IN ID SCOPE
RMU.1 / MEA ROOM ( BUILDING MANAGEMENT ROOM. )
E
THE LORD RAMA 9
E
Drawing title
KEY PLAN LEVEL 03 Date generated
01 -
KEY PLAN : LEVEL 03 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K03-2004
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8
85000 8500
8500
8500
8500
8500
8500
8500
8500
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MALE
:
1
2
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
MECHANICAL ENGINEERS :
1000
A
วิศวกรงานระบบ
:
C2 C1
C1
C1
MEP
-
:
Shaft
INTERIOR DESIGNER :
ID-TYP-4211
มัณฑนากร
:
LANDSCAPE DESIGNER :
86 sq.m. RETAIL AREA 29 Shaft
112 sq.m.
RETAIL AREA 26
RETAIL AREA 27
RETAIL AREA 28
Key Plan
Shaft
JO-02
112 sq.m.
DN NOT IN ID SCOPE
MEP
377 sq.m.
ภูมิสถาปนิก
: MEP
8500
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
FEMALE
C2
MEP Shaft
ID-TYP-7002
LIFT
UP
FHC.
CORRIDOR
ID-TYP-4002
RECYCLE BIN
C
C1
C1
C1
E
C1
E
C2
C3
E
ACCESS CONTROL POINT
27
28
UP
27500 8500
UP
LIFT
OPEN
LIFT HALL
ID-TYP-4001 DN
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
E
Consultant 3 Discipline
CORRIDOR AREA
:-
347.46 sq.m.
D
Consultant 2 Discipline
ACCESS CONTROL POINT
C1
C2
C3
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
:Consultant 1 Discipline
C1
C1
C1
DN
C1
C2
C3
:-
CORRIDOR Other Party 2 Responsibility
UP
FHC.
8500
MEP Shaft
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 30
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::::-
UP NOT IN ID SCOPE
MEP Shaft
Other Party 1 Responsibility
::-
DN
MEP Shaft
::Client
E F
1000
63
C1
C1
64
::::-
C1 C2
C2
NOT IN ID SCOPE
Project
UTILITIES
E
E
THE LORD RAMA 9
E Drawing title
KEY PLAN LEVEL 04 Date generated
01 -
KEY PLAN : LEVEL 04 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K04-2005
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8
85000 8500
8500
8500
8500
8500
8500
8500
8500
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MALE
:
1
B
:
MECHANICAL ENGINEERS :
1000
A
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
C2 C1
C1
C2
C1
-
FEMALE
MEP
:
INTERIOR DESIGNER :
86 sq.m.
LANDSCAPE DESIGNER : MEP
8500
112 sq.m.
112 sq.m.
RETAIL AREA 35
RETAIL AREA 36
Key Plan
MEP Shaft
NOT IN ID SCOPE
MEP Shaft
ID-TYP-7002 RECYCLE BIN
ภูมิสถาปนิก
:
DN
Shaft
377 sq.m.
มัณฑนากร
:
2500
RETAIL AREA 37
RETAIL AREA 34
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
ID-TYP-4211
JO-02
วิศวกรงานระบบ
:
UP
FHC.
2500
UP
LIFT ID-TYP-4002 DN
C
C1
C1
C1
E
C1
C2
E
C3
E
UP
ACCESS CONTROL POINT
27
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27500 8500
UP
LIFT
OPEN
LIFT HALL
ID-TYP-4001 DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
E
Consultant 3 Discipline
CORRIDOR AREA
:-
57.88 sq.m.
D
ACCESS CONTROL POINT
C1
C2
C3
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
Consultant 2 Discipline
:Consultant 1 Discipline
C1
C1
C1
C1
C2
:-
C3
MEP
8500
Shaft
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 38
RETAIL AREA 39
RETAIL AREA 40
RETAIL AREA 41
Other Party 2 Responsibility
RAMP
FHC.
::-
UP
::-
NOT IN ID SCOPE MEP MEP
Shaft
Other Party 1 Responsibility
DN
Shaft
2500
1000
2500
::::-
E F
1000
63
C1
64
Client
::C1
C1
::-
C2
C2
NOT IN ID SCOPE
Project
UTILITIES
E
E
THE LORD RAMA 9
E Drawing title
KEY PLAN LEVEL 05 Date generated
01 -
KEY PLAN : LEVEL 05 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K05-2006
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8
85000 8500
8500
8500
8500
8500
8500
8500
OWNERS : เจ้าของ
8500
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
MALE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
1
:
MECHANICAL ENGINEERS :
B
วิศวกรงานระบบ
:
1000
A
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2 C1
C1
FEMALE
C2
-
C1
ID-TYP-4211
:
MEP
INTERIOR DESIGNER :
Shaft
มัณฑนากร
:
LANDSCAPE DESIGNER :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
MEP
8500
JO-02
377 sq.m.
MEP Shaft
Key Plan
DN
Shaft
NOT IN ID SCOPE
MEP
UP
Shaft
ID-TYP-7002
RETAIL AREA 42
ภูมิสถาปนิก
:
FHC. RECYCLE BIN
LIFT
UP
CORRIDOR ID-TYP-4002 DN
C
C1
C1
C1
E
C1
E
C2
ACCESS CONTROL POINT
C3
E
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27
UP
27500 8500
UP
LIFT
OPEN
LIFT HALL
ID-TYP-4001
:-
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
E
:-
D
C1
C1
C1
C2
C3
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
C1
Consultant 2 Discipline
ACCESS CONTROL POINT
:Consultant 1 Discipline
C2
C3
CORRIDOR
Other Party 2 Responsibility
8500
RETAIL AREA 46
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 47
RETAIL AREA 48
RETAIL AREA 49
MEP Shaft
::-
RAMP
FHC.
377 sq.m.
:-
DN
C1
::-
UP
Other Party 1 Responsibility
NOT IN ID SCOPE
MEP Shaft
::-
DN
::-
MEP Shaft
Client
63
1000
E F
C1
C1
64
::::-
C1
Project
C2
C2
THE LORD RAMA 9
UTILITIES NOT IN ID SCOPE
E
E
E
Drawing title
KEY PLAN LEVEL 06 Date generated
01 -
KEY PLAN : LEVEL 06 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K06-2007
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
3
4
5
6
7
8
9
10
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
11
OWNERS : เจ้าของ
85000 8500
8500
8500
8500
8500
8500
8500
8500
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
FEMALE NOT IN ID SCOPE
:
NOT IN ID SCOPE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
C1 ID-TYP-5401
C2
C2
ID-TYP-5401
:
INTERIOR DESIGNER :
C2
MEP
MALE
Shaft
ID-TYP-5401
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
DIS. BOH WASTE FOOD + WASHING MACHINE
มัณฑนากร
:
ID-TYP-5401
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
DN
NOT IN ID SCOPE
SERVICE
59 sq.m.
NOT IN ID SCOPE
MEP ID-TYP-4206
42.5 sq.m.
RECYCLE BIN
FHC.
FIRE COMPARTMENT AREA
Cafeteria Area 1457 sq.m.
C3
C1
DISABLED ACCESS / MANUAL OPERATED
ACCESS CONTROL POINT
NOT IN ID SCOPE
LIFT ID-TYP-4002
ID-TYP-5401
ID-TYP-5401
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ACCESS CONTROL POINT
LIFT ID-TYP-4001
UP
OPEN
LIFT HALL
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
DN
:Consultant 2 Discipline
:-
C3
C1
Consultant 1 Discipline
ID-TYP-5401
ID-TYP-5401
DN ACCESS CONTROL POINT
:-
FHC.
Other Party 2 Responsibility
DISABLED ACCESS / MANUAL OPERATED
UP
NOT IN ID SCOPE
::::-
MEP
Other Party 1 Responsibility
Shaft
NOT IN ID SCOPE
NOT IN ID SCOPE MEP Shaft
DN
SERVICE 42.5 sq.m.
MEP C1
C2
C2
C2
C2
C2
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
::::Client
::::Project
THE LORD RAMA 9 NOT IN ID SCOPE
NOT IN ID SCOPE
Drawing title
KEY PLAN LEVEL 07 -
E
Date generated
01 -
KEY PLAN : LEVEL 07 FL. SCALE
1:150
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K07-2008
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
C2
C2
C2
C2
C2
C2
C2
C2
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
ID-TYP-5401
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
1 AREA FOR RENT (OFFICE)
ID-TYP-4217
2 AREA FOR RENT (OFFICE)
3 AREA FOR RENT (OFFICE)
159 sq.m.
294 sq.m.
187 sq.m.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
JO-02 FEMALE
MALE
ID-TYP-7002
MALE FEMALE
MEP Unit
C2
MEP Unit MALE
C2
MEP Center
FHC.
RECYCLE BIN
C2
MEP Unit
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
FHC.
LIFT
LIFT HALL
ID-TYP-4004
UP
D-01 FEMALE
ID-TYP-4224
DN
MEP Center MEP Unit
Consultant 3 Discipline
:-
MEP Unit
FIRE COMPARTMENT AREA (NO ACCESS)
C2
:-
C2
MALE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 2 Discipline
:Consultant 1 Discipline
MALE
:-
FEMALE Other Party 2 Responsibility
4 AREA FOR RENT (OFFICE) 200 sq.m.
WC
5 AREA FOR RENT (OFFICE)
6 AREA FOR RENT (OFFICE)
158 sq.m.
291 sq.m.
::::-
ID-TYP-4221
Other Party 1 Responsibility
::-
C2
C2
C2
C2
C2
C2
C2
ID-TYP-5401
C2
::Client
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 08 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 08 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K08-2009
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
8500
1 AREA FOR RENT (OFFICE)
2 AREA FOR RENT (OFFICE)
ID-TYP-4217
210 sq.m.
3 AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
FEMALE
MALE
JO-02
MALE FEMALE
ID-TYP-7002
MEP Unit
C2
MEP Unit
C
MEP Central
C2
MEP Unit
FHC. RECYCLE BIN
MALE
C2
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
27500 8500
DN
NOT IN ID SCOPE
FHC.
LIFT
LIFT HALL
NOT IN ID SCOPE
ID-TYP-4004
UP
-
DN
MEP Unit
MEP Central
:-
ID-TYP-4224
FEMALE
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
MEP Unit
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 1 Discipline
:C2
8500
FEMALE
MALE
Other Party 2 Responsibility
MALE FEMALE MEP
Unit
4 AREA FOR RENT (OFFICE)
-
5 AREA FOR RENT (OFFICE)
210 sq.m.
ID-TYP-4216
163 sq.m.
::-
6 AREA FOR RENT (OFFICE)
::-
301 sq.m.
Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2
C2
ID-TYP-5401
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
Date generated
27/03/20
KEY PLAN : LEVEL 09-16 FL. SCALE
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 09-16 -
1:150
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K09-2010
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
8500
1 AREA FOR RENT (OFFICE)
2 AREA FOR RENT (OFFICE)
ID-TYP-4217
178 sq.m.
3 AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
JO-02 FEMALE
MALE
ID-TYP-7002
MALE FEMALE
MEP Center
C2
MEP Unit
C C2
MEP Center
MEP Unit
FHC. RECYCLE BIN
MALE
C2
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
27500 8500
DN
LIFT
LIFT HALL
FHC.
ID-TYP-4004
UP
-
DN
MEP Unit
MEP Center
:-
ID-TYP-4224
FEMALE
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
MEP Unit
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 1 Discipline
:C2 FEMALE
MALE
Other Party 2 Responsibility
MALE FEMALE MEP
8500
Center 4 AREA FOR RENT (OFFICE)
-
5 AREA FOR RENT (OFFICE)
178 sq.m.
ID-TYP-4216
162 sq.m.
::-
6 AREA FOR RENT (OFFICE)
::-
301 sq.m.
Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2
C2
ID-TYP-5401
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 17 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 17 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K17-2011
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
8500
1 AREA FOR RENT (OFFICE)
2 AREA FOR RENT (OFFICE)
ID-TYP-4217
178 sq.m.
3 AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
FEMALE
MALE
JO-02
MALE FEMALE
ID-TYP-7002
MEP Center
C2
MEP Unit
C C2
MEP Center
MEP Unit
FHC. RECYCLE BIN
MALE
C2
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
27500 8500
DN
LIFT
LIFT HALL
FHC.
ID-TYP-4004
UP
-
DN
MEP Unit
MEP Center
:-
ID-TYP-4224
FEMALE
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
MEP Unit
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 1 Discipline
:C2 FEMALE
MALE
Other Party 2 Responsibility
MALE FEMALEMEP
8500
Center 4 AREA FOR RENT (OFFICE)
-
5 AREA FOR RENT (OFFICE)
178 sq.m.
ID-TYP-4216
162 sq.m.
::-
6 AREA FOR RENT (OFFICE)
::-
301 sq.m.
Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2
C2 ID-TYP-5401
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 18-21 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 18-21 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:125 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K18-2012
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
8500
1 AREA FOR RENT (OFFICE)
ID-TYP-4217
2 AREA FOR RENT (OFFICE)
3 AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
178 sq.m.
FEMALE
MALE
JO-02
MALE FEMALE
AHU.
ID-TYP-7002
C2
MEP Unit
C
MEP Center
C2
27500 8500
RECYCLE BIN
HALL
DN
MALE
FHC.
C2
MEP Unit
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
LIFT
LIFT LOBBY
ID-TYP-4006
UP
-
DN
MEP Unit
MEP Center
:-
ID-TYP-4224
FEMALE
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
MEP Unit
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 1 Discipline
:C2 FEMALE
MALE
AHU.
Other Party 2 Responsibility
MALE FEMALE
8500
::4 AREA FOR RENT (OFFICE) 178 sq.m.
-
5 AREA FOR RENT (OFFICE)
6 AREA FOR RENT (OFFICE)
ID-TYP-4216
162 sq.m.
301 sq.m.
::Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2 ID-TYP-5401
C2
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 22 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 22 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K22-2013
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
Key Plan
-
2 AREA FOR RENT (OFFICE)
1 AREA FOR RENT (OFFICE)
295 sq.m.
347 sq.m.
ID-TYP-4231
JO-02 ID-TYP-7002 FEMALE
C2
MEP Unit
C C2
MEP Center
MALE
FHC. RECYCLE BIN
MALE
MEP Unit
C2 -
FEMALE
ID-TYP-4224
UP
DN
27500 8500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FHC.
MEP CenterLIFT MACHINE ROOM
LIFT
LIFT LOBBY
ID-TYP-4008
UP
:-
DN
FEMALE MALE
D
MEP Unit C2
+
Consultant 3 Discipline
:-
MEP Unit
MEP Center
Consultant 2 Discipline
C2
MALE
:Consultant 1 Discipline
:-
CORRIDOR
FEMALE
C2
MACHINE ROOM
Other Party 2 Responsibility
CORRIDOR
::-
-
::-
4 AREA FOR RENT (OFFICE)
ID-TYP-4231
8500
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
3 AREA FOR RENT (OFFICE)
Other Party 1 Responsibility
301 sq.m.
::-
281 sq.m.
::Client
C2
F
C2
C2
C2
C2
C2 ID-TYP-5401
C2
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 23 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 23 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K23-2014
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
Key Plan
1 AREA FOR RENT (OFFICE)
2 AREA FOR RENT (OFFICE)
365 sq.m.
295 sq.m.
JO-02 ID-TYP-7002
-
C2
ID-TYP-4227
C MALE
C2
C2 MEP Unit
MEP Center
FEMALE
MALE
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE
ID-TYP-4224
LIFT
LIFT LOBBY
FHC.
C2
MEP Unit
UP
DN
27500 8500
FHC.
ID-TYP-4008
UP
:-
DN
FEMALE
MEP Unit
FEMALE
MALE
Consultant 3 Discipline
:-
MEP Unit
MEP Center
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 2 Discipline
C2
:-
MALE
D
Consultant 1 Discipline
CORRIDOR
C2
8500
C2
:-
C2
Other Party 2 Responsibility
3 AREA FOR RENT (OFFICE)
4 AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
::::Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2
C2
ID-TYP-5401
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 24 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 24 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K24-2015
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
1 AREA FOR RENT (OFFICE)
ID-TYP-4217
169 sq.m.
FEMALE
C
MALE
2 AREA FOR RENT (OFFICE)
3 AREA FOR RENT (OFFICE)
159 sq.m.
294 sq.m.
JO-02
MALE FEMALE
ID-TYP-7002
AHU.
C2
MEP Unit C2
Key Plan
MALE
MEP Center
CORRIDOR
FHC. RECYCLE BIN
C2
MEP Unit
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
27500 8500
DN
CORRIDOR
LIFT
LIFT LOBBY
ID-TYP-4008
UP
-
DN
FEMALE
:-
ID-TYP-4224
Consultant 3 Discipline
:-
MEP Unit
MEP Center
Consultant 2 Discipline
C2
:-
MALE
MEP Unit
D
Consultant 1 Discipline
C2 FEMALE
8500
4 AREA FOR RENT (OFFICE) 169 sq.m.
MALE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
MALE FEMALE
AHU.
-
:-
C2
Other Party 2 Responsibility
5 AREA FOR RENT (OFFICE)
6 AREA FOR RENT (OFFICE)
162 sq.m.
301 sq.m.
::::Other Party 1 Responsibility
ID-TYP-4216
::::Client
C2
F
C2
C2
C2
C2
C2 ID-TYP-5401
C2
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 25 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 25 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K25-2016
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
1 AREA FOR RENT (OFFICE)
Key Plan
2 AREA FOR RENT (OFFICE)
330 sq.m.
295 sq.m.
JO-02 -
ID-TYP-7002
ID-TYP-4227
C2
C C2 MEP Unit
MEP Center
FEMALE
MALE
FHC.
MEP Unit
RECYCLE BIN
MALE
C2 -
FEMALE 27500 8500
ID-TYP-4224
UP
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
LIFT
LIFT LOBBY
ID-TYP-4008
UP
:-
DN
FEMALE
MEP Unit
FEMALE
MALE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
MEP Unit
MEP Center
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
D
Consultant 1 Discipline
:-
CORRIDOR
C2
Other Party 2 Responsibility
8500
::3 AREA FOR RENT (OFFICE)
4 AREA FOR RENT (OFFICE)
292 sq.m.
301 sq.m.
::Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2
C2
ID-TYP-5401
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 26 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 26 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K26-2017
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
1 AREA FOR RENT (OFFICE)
Key Plan
2 AREA FOR RENT (OFFICE)
330 sq.m.
295 sq.m.
JO-02
-
ID-TYP-7002
ID-TYP-4227
C2
C C2
C2 MEP Unit
MALE
MEP Center
FEMALE
MALE
FHC. RECYCLE BIN
FEMALE UP
27500 8500
DN
C2
MEP Unit
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ID-TYP-4224
LIFT LIFT LOBBY
ID-TYP-4008
UP
:-
DN FEMALE
MEP Unit
FEMALE
MALE
MEP Unit
MEP Center
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
D
Consultant 1 Discipline
CORRIDOR
C2
:-
C2
C2
Other Party 2 Responsibility
8500
::3 AREA FOR RENT (OFFICE)
4 AREA FOR RENT (OFFICE)
292 sq.m.
301 sq.m.
::Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2 ID-TYP-5401
C2
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 27-33 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 27-33 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K27-2018
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
B
วิศวกรงานระบบ
:
1000
A
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
C2
C2
C2
C2
C2
C2
C2
:
INTERIOR DESIGNER :
ID-TYP-5401
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
1 AREA FOR RENT (OFFICE)
Key Plan
2 AREA FOR RENT (OFFICE)
330 sq.m.
295 sq.m.
JO-02
-
ID-TYP-7002
ID-TYP-4227
C2
C C2
C2 MEP Unit
MALE
FEMALE
LT-1
MEP Center
MEP Unit
FHC.
MALE
C2
RECYCLE BIN
D-01
FEMALE 27500 8500
ID-TYP-4224
UP
DN
LIFT
LIFT LOBBY
FHC.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ID-TYP-4008
UP
:-
DN
FEMALE
MEP Unit
FEMALE
MALE
LT-1
MEP Unit
MEP Center
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
:Consultant 2 Discipline
C2
MALE
:-
D
Consultant 1 Discipline
C2
:-
CORRIDOR
C2
Other Party 2 Responsibility
8500
::3 AREA FOR RENT (OFFICE)
4 AREA FOR RENT (OFFICE)
292 sq.m.
301 sq.m.
::Other Party 1 Responsibility
::::Client
C2
F
C2
C2
C2
C2 ID-TYP-5401
C2
C2
1000
E
::::Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 34-35 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 34-35 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K34-2019
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
B
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
1000
A
:
INTERIOR DESIGNER :
C2
C2
C2
C2
มัณฑนากร
:
ID-TYP-5401
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
8500
1 AREA FOR RENT (OFFICE) 288 sq.m. UP
-
ID-TYP-7002
ID-TYP-4234
JO-02
C
MEP Unit
C2
C2
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
MALE
CORRIDOR 27500 8500
DN
LIFT
LIFT LOBBY
110.83 sq.m.
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
ID-TYP-4008
Consultant 3 Discipline
:Consultant 2 Discipline
FEMALE
C2
C2
D
:Consultant 1 Discipline
MEP Unit
:CORRIDOR
Other Party 2 Responsibility
::UP
8500
::-
RECYCLE BIN
Other Party 1 Responsibility
2 AREA FOR RENT (OFFICE)
::-
259 sq.m.
::Client
::-
C2
F
C2
C2
ID-TYP-5401
C2
::-
1000
E
Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 36 FL. SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 36 Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:150 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K36-2020
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
9
10
11
51000 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
B
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
1000
A
วิศวกรงานระบบ
:
:
C2
C2
C2
INTERIOR DESIGNER :
C2
มัณฑนากร
:
ID-TYP-5401
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
8500
Key Plan
OFFICE AREA 246 sq.m.
DN
C C2
C2
27500 8500
RECYCLE BIN
JO-02 ID-TYP-7002
CORRIDOR 110 sq.m.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:-
C2
C2
Consultant 1 Discipline
D
:Other Party 2 Responsibility
::::-
8500
DN
Other Party 1 Responsibility
OFFICE AREA 246 sq.m.
::::Client
::-
C2
F
C2
ID-TYP-5401
C2
::-
1000
E
C2
Project
THE LORD RAMA 9
Drawing title
REMARK 01 -
KEY PLAN : LEVEL 36 FL. (MEZZANINE) SCALE
1:150
: THE PARTITION BOUNDARY IN AREA FOR RENT (OFFICE) IS A SAMPLE FOR ORGANIZING SPACE ZONING ONLY.
KEY PLAN LEVEL 36 (MEZZANINE) Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:125 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-K36M-2021 A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
8500
8500
แนวเขตที่ดิน
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
1950
STO. 3202
FEMALE
1000
A B
FEMALE
OWNERS : เจ้าของ
191 sq.m.
111 sq.m.
198 sq.m.
RETAIL AREA 1
RETAIL AREA 2
RETAIL AREA 3
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
7800
7302
8500
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
2200
FHC.
1000
1 2
700
ภูมิสถาปนิก
900
Key Plan
CORRIDOR UP
RECYCLE BIN
UP
C
1700
LANDSCAPE DESIGNER : :
800
2450
มัณฑนากร
:
6
2700
5
DISABLED LIFT
4
1500
3 7
DASHLINE OF 2 FL. FLOOR LEVEL
8 9
750
2500 5
6
7
8
9
750
4
8500
1000
3
UP
PLAZA
2
HALL
LIFT HALL
1
NOT IN ID SCOPE SERVICE ROOM
UP
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
+1.50 m LANDING
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
Consultant 2 Discipline
3
Consultant 1 Discipline
:-
2
2200
5 4
:-
1
D
Other Party 2 Responsibility
2500 7000
1000
750
::-
CORRIDOR
::Other Party 1 Responsibility
FHC.
::3000
5550
Project
+1.35 m
RETAIL AREA 8
RETAIL AREA 7
Client
::-
150 sq.m.
116 sq.m.
::-
::-
106 sq.m. RETAIL AREA 6
5550
108 sq.m. RETAIL AREA 5
+1.20 m
NOT IN ID SCOPE 5550
RETAIL AREA 4A
5902
136 sq.m.
5902
57 sq.m. RETAIL AREA 4B
5902
8500
UP
THE LORD RAMA 9 SLOPE 1:8
1400
E SLOPE 1:8
1000
F
Drawing title
4400
4400
5650
4200
+1.50 m
5650
แนวเขตที่ดิน
8 7
:-
6
9
Consultant 3 Discipline
+0.80 m
MEP ROOM NOT20 IN ID SCOPE
SETOUT PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
-
SCALE
1:100
Approved
-
MF.
1:100 @ A2 sheet size Project number
SETOUT PLAN (B1 FL.)
Checked
-
Scale
7948 01
Drawn
35 mm. on original Drawing number
Revision
ID-L00-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2 8500
3 8500
แนวเขตที่ดิน
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
STO. PL-01 SK-01
PL-01
FEMALE
DR-02A
SK-01
DR-AR
A 1000
DR-02A
B
FEMALE
PL-02
PL-02
191 sq.m. SK-01
SK-01
RETAIL AREA 1
PL-02
PL-02
SK-01
SK-01
111 sq.m.
198 sq.m.
RETAIL AREA 2
RETAIL AREA 3
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
DR-03
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
PL-01 8500
:
NOT IN ID SCOPE
SK-01
PL-01 SK-01
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
FHC.
PL-02
PL-02
PL-02
SK-01
SK-01
SK-01
PL-02
PL-02
SK-01
SK-01
DR-AR
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
CORRIDOR UP
RECYCLE BIN 1 2
UP
C
3 4 5
DISABLED LIFT 6 7
DASHLINE OF 2 FL. FLOOR LEVEL
8 9
PL-06
DR-01
LIFT HALL 3
4
5
6
7
8
9
PL-06
UP
2
8500
HALL
1
NOT IN ID SCOPE SERVICE ROOM
UP
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
-
+1.50 m LANDING
DN
-
PLAZA
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
Consultant 2 Discipline
3
Consultant 1 Discipline
5 4
:-
2
:-
1
D
Other Party 2 Responsibility
DR-AR
PL-02
PL-02
PL-02
SK-01
SK-01
SK-01
PL-02
PL-02
SK-01
SK-01
DR-01
::-
CORRIDOR
::Other Party 1 Responsibility
FHC.
::-
DR-AR
PL-01 SK-01 8500
+1.20 m
NOT IN ID SCOPE PL-01
57 sq.m.
PL-01
136 sq.m.
SK-01
RETAIL AREA 4B
PL-01
108 sq.m.
SK-01
RETAIL AREA 4A
106 sq.m.
SK-01
RETAIL AREA 5
PL-01
PL-01
SK-01
SK-01
3000
UP
DR-03
::Client
::::-
RETAIL AREA 6
Project
PL-02
PL-02
SK-01
SK-01
SK-01
+1.35 m
RETAIL AREA 8
RETAIL AREA 7
PL-02
SK-01
SK-01
DR-01F
1400
PL-02
THE LORD RAMA 9 SLOPE 1:8
PL-02
150 sq.m.
116 sq.m.
E SLOPE 1:8
1000
แนวเขตที่ดิน
8 7
:-
6
9
Consultant 3 Discipline
F
Drawing title
+1.50 m
PL-01 SK-01
+0.80 m
MEP ROOM NOT20 IN ID SCOPE
PARTITION PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (B1 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L00-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2 8500
3 8500
4
แนวเขตที่ดิน
5
6
D-01
7
59500 8500
8500
8500
8500
Copyright
8
ID-TYP-4201A
© THE BEAUMONT PARTNERSHIP 2009
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL-02 STO.
CH.+2600
FEMALE
CL-01 A 1000
CH.+3000
B
FEMALE
OWNERS : เจ้าของ
CL-02
191 sq.m.
111 sq.m.
198 sq.m.
RETAIL AREA 1
RETAIL AREA 2
RETAIL AREA 3
CH.+2600
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
:
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
FHC.
01
CL-01
ID-TYP-5301
CL-01
300 1
250 100
2 3 4
300
Key Plan
UP
C
5
200 950 100
ภูมิสถาปนิก
:
JOINERY FULL HEIGHT UP RECYCLE BIN
100
0 120
LANDSCAPE DESIGNER :
CH.+3500
CORRIDOR
CH.+3650
มัณฑนากร
:
DISABLED LIFT
CL-01 DASHLINE OF 2 FL. FLOOR LEVEL
ID-TYP-5301
7
L2
6
01
8
CH.+3650
80
9
CL-01
9
200 9
Consultant 2 Discipline
8 7
:-
6
CL
03
ALIGN
:Consultant 1 Discipline
5
ID-TYP-5301
4
L1
L1
L2
L1
02
2
L2
ID-TYP-5301
1
L2
:-
3
L1
950 250
100 100
R33
CL
L2
CL-01 CH.+3150
Consultant 3 Discipline
200
56 R1 8 00
300
L1
ID-TYP-5301
ID-TYP-5301
CL-01 CH.+3000 LIFT HALL
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Other Party 2 Responsibility
100
D
CL-01 CH.+3650
01 LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
00
ID-TYP-5301
R8
CL-01 CH.+3500 ALIGN
CL-01 CH.+3650
::-
CL-01 CORRIDOR CH.+3500
::Other Party 1 Responsibility
FHC.
::UP +1.20 m
NOT IN ID SCOPE
57 sq.m.
136 sq.m.
108 sq.m.
106 sq.m.
RETAIL AREA 4B
RETAIL AREA 4A
RETAIL AREA 5
RETAIL AREA 6
3000
8500
ELPB/27
::Client
::::Project
116 sq.m. RETAIL AREA 7
150 sq.m.
+1.35 m
RETAIL AREA 8 CH.+3500
THE LORD RAMA 9 SLOPE 1:8
1400
CL-01
E SLOPE 1:8
1000
แนวเขตที่ดิน
CL
L2
8
PLAZA
R8112
L1
7
CH.+3650
6
UP
5
L2
4
CL-01
3
NOT IN ID SCOPE
04 2
8500
HALL 1
NOT IN ID SCOPE
CH.+3500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
05
UP
27500
L1
NOT IN ID SCOPE SERVICE ROOM
+1.50 m LANDING
DN
ALIGN
300
NOT IN ID SCOPE
F
ELPB/27 +1.50 m
CL-01 CH.+3000
01 -
+0.80 m
REFLECTED CEILING PLAN (B1 FL.) SCALE
Drawing title
1:100
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER
MEP ROOM NOT20 IN ID SCOPE
REFLECTED CEILING PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L00-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2 8500
3 8500
4
แนวเขตที่ดิน
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
STO. FEMALE J H+100
H+100
H+100
WP
H+100
J
1000
A H+100
H+100
H+100
H+100
B
J
FEMALE
OWNERS : เจ้าของ
191 sq.m.
111 sq.m.
198 sq.m.
RETAIL AREA 1
RETAIL AREA 2
RETAIL AREA 3
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
CORRIDOR
H+100
H+100
J
J
H+100 1
C
2
J
UP
H+100
UP
RECYCLE BIN
3 4 5
DISABLED LIFT 6 7
DASHLINE OF 2 FL. FLOOR LEVEL
8 9
HALL
LIFT HALL 1
2
3
4
5
6
7
8
9
8500
NOT IN ID SCOPE SERVICE ROOM
UP
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
+1.50 m LANDING
DN
UP
PLAZA
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
Consultant 2 Discipline
3
Consultant 1 Discipline
5 4
:-
J
J
H+100
H+100
H+100
:-
1
D
2
J H+100
Other Party 2 Responsibility
::-
CORRIDOR J
::Other Party 1 Responsibility
C
FHC.
::-
J +1.20 m
NOT IN ID SCOPE
57 sq.m.
136 sq.m.
108 sq.m.
106 sq.m.
RETAIL AREA 4B
RETAIL AREA 4A
RETAIL AREA 5
RETAIL AREA 6
3000
8500
UP
::Client
::::Project
150 sq.m.
116 sq.m.
+1.35 m
RETAIL AREA 8
RETAIL AREA 7
THE LORD RAMA 9 SLOPE 1:8
1400
J
E H+100
H+100
H+100
H+100
SLOPE 1:8
1000
แนวเขตที่ดิน
8 7
:-
6
9
Consultant 3 Discipline
F H+100
H+100
H+100
Drawing title
H+100
+1.50 m +0.80 m
MEP ROOM NOT20 IN ID SCOPE
POWER OUTLET PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L00-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (B1 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
8500
แนวเขตที่ดิน
8500
4
5
6
7
FL-03
© THE BEAUMONT PARTNERSHIP 2009
NOTES
FFL.+0000
59500 8500
Copyright
8
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
STO. FEMALE
1000
A B
FEMALE
OWNERS : เจ้าของ
191 sq.m.
111 sq.m.
198 sq.m.
RETAIL AREA 1
RETAIL AREA 2
RETAIL AREA 3
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
:
NOT IN ID SCOPE
EXISTING CONCRETE FLOOR
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
STAIR ( ID COVER )
FL-01
ID-TYP-4102
FFL+000 SK-01
Key Plan
CORRIDOR UP
RECYCLE BIN 1 2
UP
C
3 4 5
SMALL LIFT DISABLED LIFT
6 7
DASHLINE OF 2 FL. FLOOR LEVEL
8 9 7
8
9
8500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FL-02 FFL+000 SK-01
UP
27500
LIFT HALL 6
FFL+1500 SK-01
5
FFL -1836 SSL -1886 FF : 00
4
HALL
LANDING
3
FFL-1836 SK-01
NOT IN ID SCOPE SERVICE ROOM
+1.50 m LANDING FL-02 2
DN
1
FL-07
START POINT
UP
PLAZA
Consultant 3 Discipline
FFL -270 SSL -320 FF : 00
9 8 7
Consultant 2 Discipline
:Consultant 1 Discipline
5 4
FFL -3054 SSL -3104 FF : 00
3
LANDING LANDING
:-
6
FFL-3054 SK-01
FFL-270 SK-01
D
:-
2
FL-01
1
FFL+000 SK-01
Other Party 2 Responsibility
FL-01
STAIR
FFL+000 SK-01
ID-TYP-4101
FL-01 FFL+000 SK-01
::-
CORRIDOR
::Other Party 1 Responsibility
FHC.
::+1.20 m
NOT IN ID SCOPE
57 sq.m.
136 sq.m.
108 sq.m.
106 sq.m.
RETAIL AREA 4B
RETAIL AREA 4A
RETAIL AREA 5
RETAIL AREA 6
3000
8500
UP
::Client
::::Project
116 sq.m. RETAIL AREA 7
150 sq.m.
+1.35 m
RETAIL AREA 8
THE LORD RAMA 9 SLOPE 1:8
1400
E 1000
แนวเขตที่ดิน
:-
FL-07
FL-07
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
SLOPE 1:8
EXISTING CONCRETE FLOOR
F
Drawing title
+1.50 m
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
+0.80 m
MEP ROOM NOT20 IN ID SCOPE
FLOOR FINISHES PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L00-2105
A
Status
01 -
FLOOR FINISHES PLAN (B1 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2 8500
3 8500
แนวเขตที่ดิน
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
STO. FEMALE
1000
A B
FEMALE
OWNERS : เจ้าของ
191 sq.m.
111 sq.m.
198 sq.m.
RETAIL AREA 1
RETAIL AREA 2
RETAIL AREA 3
:
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
CORRIDOR UP
RECYCLE BIN 1 2
UP
C
3 4 5
DISABLED LIFT 6 7
DASHLINE OF 2 FL. FLOOR LEVEL
8 9
LIFT HALL 1
2
3
4
5
6
7
8
9
8500
HALL UP
27500
NOT IN ID SCOPE SERVICE ROOM
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
+1.50 m LANDING
DN
UP
PLAZA
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
Consultant 2 Discipline
3
Consultant 1 Discipline
5 4
:-
2
:-
1
D
Other Party 2 Responsibility
::-
CORRIDOR
::Other Party 1 Responsibility
FHC.
::+1.20 m
NOT IN ID SCOPE
57 sq.m.
136 sq.m.
108 sq.m.
106 sq.m.
RETAIL AREA 4B
RETAIL AREA 4A
RETAIL AREA 5
RETAIL AREA 6
3000
8500
UP
::Client
::::Project
116 sq.m. RETAIL AREA 7
150 sq.m.
+1.35 m
RETAIL AREA 8
THE LORD RAMA 9 SLOPE 1:8
1400
E SLOPE 1:8
1000
แนวเขตที่ดิน
8 7
:-
6
9
Consultant 3 Discipline
F
Drawing title
+1.50 m +0.80 m
MEP ROOM NOT20 IN ID SCOPE
WALL FINISHES PLAN LEVEL B1 FL. Date generated
27/03/20 2200
1200
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L00-2106
A
Status
01 -
WALL FINISHES PLAN (B1 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
2900
4150
2900
FEMALE
VENT.
1000
A SPIRIT
DISABLE
B HOUSE
MALE
80
R15
40
:
R16
50
130 sq.m.
112 sq.m.
RETAIL AREA 9
RETAIL AREA 10
TERRACE
0
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
ARCHITECTS : สถาปนิก :
0
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
:
DN
shaft
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
7800
MECHANICAL ENGINEERS :
UP
วิศวกรงานระบบ
:
UP
R150
25 R4
:
NOT IN ID SCOPE
7300
R5 25 0
BE NC H
8500
7800
BE
R5
00
OWNERS : เจ้าของ 00
NC H
39
R6
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
BOUNDARY RETAIL AREA LINE
:
R300 R654
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
VOID
ภูมิสถาปนิก
:
900
38
R544
HALL
R2
R7 75
DN
LIFT HALL
HALL
DN
350
R425 11 0
HAND-RAIL
R676 6
UP
3507
25 42
1772
UP R2 HAND-RAIL
UP
53
R3
R3 91 0
R14
0 00
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
00
R1500
9 64 R1
350
R5000
UP
400
3710
R6761
850 R3
8500
27500
4
6
R556
4694
R6000
UP
H BENC
UP
11260
493
HAND-RAIL
Consultant 3 Discipline
:-
CORRIDOR AREA 391.28 sq.m.
Consultant 2 Discipline
:-
FD. FD.
3050
50 R15
Consultant 1 Discipline
:-
35
24
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
350
HAND-RAIL
350
FD. FD.
400
0
R4860
0 R54
UP
RECYCLE BIN
R2050
0
Key Plan
CORRIDOR
UP
R1875
R600
C
54
3943
UP
900
R879
UP
Other Party 2 Responsibility
UP
::-
CORRIDOR UP
::-
UP
Other Party 1 Responsibility
UP
FHC.
::-
78 sq.m. UP
::-
UP
Client
8752
8500
RETAIL AREA 13
::-
NOT IN ID SCOPE
80 sq.m.
::-
DN
MEP shaft
Project
RETAIL AREA 14
THE LORD RAMA 9 MEP
1000
E F
Drawing title
SETOUT PLAN LEVEL 01 FL. -
STAFF OFFICE
STAFF OFFICE
User 0
User 0
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (01 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L01-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
FEMALE
PL-01
PL-01
PL-01
SK-01
SK-01
SK-01 DR-02A VENT.
SPIRIT
1000
A
C2
B HOUSE
C1
01 TERRACE
PL-06
DR-04
130 sq.m.
ID-TYP-5401
01
ID-TYP-5402
ID-TYP-5402
112 sq.m.
ID-TYP-5401
RETAIL AREA 9
01
RETAIL AREA 10
OWNERS : เจ้าของ
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
BE
shaft
PL-01
PL-01
SK-01
SK-01
SK-01
ARCHITECTS : สถาปนิก :
MEP PL-01
:
DR-02A
SK-01
NC H
DISABLE MALE
01
BE NC H
8500
C2
C1
C1
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
DN
DR-03
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
:
FHC. UP
01
01
01
01
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
มัณฑนากร
:
LANDSCAPE DESIGNER :
VOID
ภูมิสถาปนิก
Key Plan
CORRIDOR
ID-TYP-5401
UP
DR-AR
:
01
ID-TYP-5401
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
BOUNDARY RETAIL AREA LINE
INTERIOR DESIGNER :
UP
วิศวกรงานระบบ
:
UP UP
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
PL-03
C
UP
RECYCLE BIN
SK-01 SET OUT
C1
FD. FD.
C1
C1
C3
C3
PL-06
PL-06
-
-
HAND-RAIL HAND-RAIL
H BENC
UP
W-1
UP
DR-07
PL-07
UP
UP
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
HALL
LIFT HALL
HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
HAND-RAIL
CORRIDOR AREA
UP
01
HAND-RAIL
ID-TYP-5401
FD. FD.
DR-07
:-
391.28 sq.m.
UP
01
01
ID-TYP-5401
ID-TYP-5401
Consultant 2 Discipline
:PL-06
Consultant 1 Discipline
-
:-
D
Other Party 2 Responsibility
C1
C1
C1
C3
C3
PL-06
UP
::-
-
CORRIDOR UP
UP
01
01
ID-TYP-5402
ID-TYP-5402
::Other Party 1 Responsibility
UP
FHC. DR-AR
::-
DR-AR
78 sq.m. 8500
RETAIL AREA 13
UP
DR-03
PL-01 SK-01
::-
UP
Client
::-
NOT IN ID SCOPE
80 sq.m.
::-
DN
MEP shaft
Project
RETAIL AREA 14
THE LORD RAMA 9 MEP
1000
E F
Drawing title
PARTITION PLAN LEVEL 01 FL. -
STAFF OFFICE
STAFF OFFICE
User 0
User 0
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (01 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L01-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
CL-02
7
59500 8500
8500
8500
8500
8500
8
CH.+2600
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
CL-02 CH.+2600
VENT.
1000
SPIRIT
CL-02
CL-02
CH.+2600
CH.+2600
CL-02
B HOUSE
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
A
Copyright
CH.+2600
OWNERS : เจ้าของ
L1
CL-01
:
ARCHITECTS : สถาปนิก
CH.+3000
:
NOT IN ID SCOPE
CH.+2600
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
BE
NC H
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
CL-02
L2
8500
BE NC H
CL-01
:
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
CH.+3150
วิศวกรงานระบบ
:
L1
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
CL-01
:
CH.+3150
INTERIOR DESIGNER :
มัณฑนากร
:
100
01
LANDSCAPE DESIGNER :
ID-TYP-5301
L2
CL
CL
UP
CL-01
CL
CL
CL-01
CL-01
CH.+3150
CH.+3150
UP
ภูมิสถาปนิก
:
Key Plan
CH.+3000
L1
300
CL-01
8500
UP
200
04
03
200 250
CH.+3150
UP
DN
CH.+3150
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
HAND-RAIL
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
CL-01
CL-01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ID-TYP-5301
CL-01
DN
80
05
ID-TYP-5301
ID-TYP-5301
80
CH.+3000
VOID
ID-TYP-5301
CH.+3000
CH.+3000
80
UP
Consultant 3 Discipline
CL-01
100
27500
PP
80
CH.+3000
UP
05
CL-01
CL-01
JOINERY FULL HEIGHT
L1
L2
CL-01
CH.+3150
UP
L1
L2
ALIGN
UP
L1
L2
ALIGN
H BENC
VOID
L1
L2
ALIGN
L1
L2
ALIGN
L1
ALIGN
L2
100
L1
L2
HAND-RAIL
200 250
L1 HAND-RAIL
01 ID-TYP-5301
100
580
L2
200
ID-TYP-5301
FD. FD.
100
02
C
:-
CH.+3150
HAND-RAIL
Consultant 2 Discipline
:-
ALIGN
FD. FD.
D
:-
250
100
700
Consultant 1 Discipline
Other Party 2 Responsibility
CL-01 CH.+3150 UP
UP
ALIGN
CL-01
::-
CL-01
CH.+3000
::-
CH.+3150
ELP1/9
Other Party 1 Responsibility
::::-
03 8500
ID-TYP-5301
Client
UP
::-
NOT IN ID SCOPE VOID
05 ID-TYP-5301
::-
CL-01 CH.+3000
Project
THE LORD RAMA 9 CL-01
THIS AREA BE GOING ON UPDATE BY MEP SCOPE
CH.+3000
1000
E F
Drawing title
STAFF OFFICE
REFLECTED CEILING PLAN LEVEL 01 FL. -
REFLECTED CEILING PLAN (01 FL.) SCALE
Date generated
1:100 User 0
-
User 0
01
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM
Project number
7948
35 mm. on original Drawing number
Revision
ID-L01-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
FEMALE
J WP
VENT.
A
J
1000
SPIRIT
H+100
H+100
H+100
H+100
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
DISABLE
H+100
B HOUSE
J H+100
H+100
MALE
OWNERS : เจ้าของ : TERRACE
130 sq.m.
112 sq.m.
RETAIL AREA 9
RETAIL AREA 10
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
NC H
MEP
:
DN
shaft
BE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
BE NC H
8500
:
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
UP UP
BOUNDARY RETAIL AREA LINE
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
VOID
ภูมิสถาปนิก
:
UP
Key Plan
H+100
UP
H+100
CORRIDOR
UP H+100
C
UP
RECYCLE BIN
H+100
J J
J
J
J
FD. FD. HAND-RAIL HAND-RAIL
H BENC
UP
UPP
UP
J
8500
27500
UP
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
HALL
LIFT HALL
HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
HAND-RAIL
UP
:-
CORRIDOR AREA 391.28 sq.m.
UP
Consultant 2 Discipline
HAND-RAIL
:-
FD. FD.
Consultant 1 Discipline
J
J
D
J
:Other Party 2 Responsibility
UP
H+100
H+100
::-
CORRIDOR
::-
UP
UP
Other Party 1 Responsibility
UP
FHC.
::-
78 sq.m. 8500
RETAIL AREA 13
::-
UP
Client
UP
::-
NOT IN ID SCOPE
80 sq.m.
::-
DN
MEP shaft
Project
RETAIL AREA 14
THE LORD RAMA 9 MEP J 1000
E F
Drawing title
POWER OUTLET PLAN LEVEL 01 FL. -
STAFF OFFICE
STAFF OFFICE
User 0
User 0
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L01-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (01 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
FL-02 FFL+000
59500 8500
8500
8500
8500
8500
8500
8
-
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
VENT.
A 1000
© THE BEAUMONT PARTNERSHIP 2009
NOTES
FEMALE
SPIRIT
Copyright
DISABLE
B HOUSE
MALE
OWNERS : เจ้าของ : TERRACE
130 sq.m.
112 sq.m.
RETAIL AREA 9
RETAIL AREA 10
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
ARCHITECTS : สถาปนิก :
NC H BE
LANDING
EXISTING CONCRETE FLOOR
FFL +1525 SSL +1475 FF : 00
EXISTING CONCRETE FLOOR
EXISTING CONCRETE FLOOR
:
DN
shaft
BE NC H
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
EXISTING CONCRETE FLOOR
:
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
UP UP
:
INTERIOR DESIGNER :
FL-06
LANDSCAPE DESIGNER :
VOID
FFL+600 SK-01
UP
Key Plan
FL-01 CORRIDOR FFL+000 SK-01
GROUND LEVEL FFL +2 450 SSL +2 400 FF : 00
WALK WAY
ภูมิสถาปนิก
:
UP
FFL +1525 SSL +1475 FF : 00
UP
FHC.
FL-01
มัณฑนากร
:
FFL+2450 SK-01
LANDING
FL-06
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
BOUNDARY RETAIL AREA LINE
FFL+1525 SK-01
วิศวกรงานระบบ
:
UP
RECYCLE BIN
FFL +0 600 SSL +0 550 FF : 00
C FD. FD.
HAND-RAIL HAND-RAIL
H BENC
UP UP
START POINT
FL-06
FL-01 FFL+2450 SK-01
8500
27500
FFL-1836 SK-01 LANDING
FL-06
FFL -1836 SSL -1886 FF : 00
FFL+600 SK-01
UP
UP
HALL
FL-03
HALL
GROUND LEVEL FFL +2 450 SSL +2 400 FF : 00
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
DN
DN
FFL+000 SK-01
LIFT HALL
FL-01 FFL+000 SK-01
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
WALK WAY FFL +0 600 SSL +0 550 FF : 00
FL-06
FL-06
FFL-270 SK-01
FFL-3054 SK-01
UP
LANDING FFL -270 SSL -320 FF : 00
FD. FD.
Consultant 3 Discipline
HAND-RAIL
LANDING HAND-RAIL
:-
CORRIDOR AREA 391.28 sq.m.
UP
Consultant 2 Discipline
FFL -3054 SSL -3104 FF : 00
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
UP
FL-01
::-
CORRIDOR
::-
FFL+000 SK-01 UP
UP
EXISTING CONCRETE FLOOR
Other Party 1 Responsibility
UP
FHC.
::-
78 sq.m. 8500
RETAIL AREA 13
::-
UP
Client
UP
::-
NOT IN ID SCOPE
EXISTING CONCRETE FLOOR 80 sq.m.
::-
DN
MEP shaft
Project
RETAIL AREA 14
THE LORD RAMA 9 FL-01 FFL+000MEP SK-01
1000
E F
01 -
FLOOR FINISHES PLAN (01 FL.) SCALE
1:100
User 0
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER User 0
STAFF OFFICE
STAFF OFFICE
Drawing title
FLOOR FINISHES PLAN LEVEL 01 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L01-2105
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
8500
4
แนวเขตที่ดิน
8500
5
6
7
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
8500
8500
8500
8500
FEMALE
VENT.
1000
A
DISABLE
B
MALE
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ : TERRACE
130 sq.m.
112 sq.m.
RETAIL AREA 9
RETAIL AREA 10
112 sq.m.
86 sq.m.
RETAIL AREA 11
RETAIL AREA 12
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
NC H
MEP
:
DN
shaft
BE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
BE NC H
NOT IN ID SCOPE
วิศวกรงานระบบ
:
UP UP
:
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
BOUNDARY RETAIL AREA LINE
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
VOID
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
UP
Key Plan
UP
CORRIDOR
UP
UP
RECYCLE BIN
C FD. FD. HAND-RAIL HAND-RAIL
H BENC
UP
UP
8500
27500
UP
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
HALL
LIFT HALL
HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
HAND-RAIL
UP
:-
CORRIDOR AREA 391.28 sq.m.
UP
Consultant 2 Discipline
HAND-RAIL
:-
FD. FD.
Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
UP
CORRIDOR
::-
UP
UP
UP
FHC.
Other Party 1 Responsibility
::-
78 sq.m. RETAIL AREA 13 8500
::-
UP
::Client
UP NOT IN ID SCOPE
80 sq.m.
DN
MEP shaft
::::Project
RETAIL AREA 14
THE LORD RAMA 9 MEP
1000
E F STAFF OFFICE
STAFF OFFICE
Drawing title
WALL FINISHES PLAN LEVEL 01 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L01-2106
A
Status
01 -
WALL FINISHES PLAN (01 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
MALE
1700
1000
8500
1700
1700
1700
A
FEMALE
B 12 00
00
12
Ø
Ø
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
295 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 15
RETAIL AREA 16
RETAIL AREA 17
MEP Shaft
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
:
DN
Shaft
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
NOT IN ID SCOPE
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
900 RECYCLE BIN
1700
Key Plan
CORRIDOR UP
C Ø
00
00
00
Ø 12
12
1700
1700
900
1700
Ø
12
ACCESS CONTROL POINT
OPEN TO BELOW
169 sq.m.
400
400
8500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
UP
RETAIL AREA 18 27500
350
350
11260
LIFT HALL
DN
:-
550
350
350
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
:345.76 sq.m.
00 12
:Consultant 1 Discipline
D 00
12
Ø
00 12 Ø
:-
1700
1700
Ø
Consultant 2 Discipline
1250
CORRIDOR AREA
Other Party 2 Responsibility
RAMP
1700
1700
ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
CORRIDOR
::::Other Party 1 Responsibility
FHC.
::-
8500
UP
::Client
NOT IN ID SCOPE DN
RECEPTION
MEP
::::Project
Shaft
OPEN TO BELOW
THE LORD RAMA 9
1000
E F
Drawing title
NOT IN ID SCOPE
RMU.1 / MEA ROOM
SETOUT PLAN LEVEL 02 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (02 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L02-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
PL-01
PL-01
SK-01
SK-01
8500
MALE DR-02
1000
A
C2
B
C1
DR-02
C2
FEMALE
C1 01
01
ID-TYP-5401
ID-TYP-5401
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
01
01
ID-TYP-5402
ID-TYP-5402
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
295 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 15
RETAIL AREA 16
RETAIL AREA 17
PL-01
8500
SK-01
PL-01
MEP Shaft
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
DR-03 MEP Shaft
:
DN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
SK-01
:
MECHANICAL ENGINEERS :
MEP
UP
:
INTERIOR DESIGNER : FHC.
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
01
วิศวกรงานระบบ
:
DR-AR
มัณฑนากร
:
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
Key Plan
CORRIDOR UP
PL-03 SK-01
C
SET OUT
C1 OPEN TO BELOW
01
PL-01
ID-TYP-5401
SK-01
C1
C1
PL-01
PL-07
SK-01
169 sq.m.
C3
ACCESS CONTROL POINT
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
UP
RETAIL AREA 18
PL-07
8500
27500
C3
-
-
LIFT HALL -
DN
DN
PL-07
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
01
01
ID-TYP-5401
ID-TYP-5401
:-
PL-06
CORRIDOR AREA
Consultant 2 Discipline
-
345.76 sq.m.
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
C1
C1
C1
C3
C3
RAMP ACCESS CONTROL POINT
01
01
01
ID-TYP-5401
ID-TYP-5402
ID-TYP-5402
DISABLED ACCESS / MANUAL OPERATED
CORRIDOR
::Other Party 1 Responsibility
FHC.
8500
DR-05
DR-03
SK-01
PL-07
::-
DR-AR
PL-01
UP
DN
RECEPTION
::Client
NOT IN ID SCOPE
-
OPEN TO BELOW
::-
MEP
::::Project
Shaft
THE LORD RAMA 9
PL-01 SK-01
DR-05 1000
E F
Drawing title
NOT IN ID SCOPE
RMU.1 / MEA ROOM
PARTITION PLAN LEVEL 02 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (02 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L02-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
Copyright
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL:02 CH.+2600
CL:02
CL:02
CH.+2600
CH.+2600
1000
A
CL:02
B
CH.+2600
OWNERS : เจ้าของ
CL:02 CH.+2600
CL:01
:
ARCHITECTS : สถาปนิก
CH.+3000
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
NOT IN ID SCOPE
q.m. REA 15
:
112 sq.m.
86 sq.m.
RETAIL AREA 16
RETAIL AREA 17
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
CL:01
MECHANICAL ENGINEERS :
01
CH.+3450
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
CL:01
CL:01
CL
CH.+3450
ภูมิสถาปนิก
:
CH.+3450
Key Plan
CL:01
L2
L1
950 L1
L2
L1
L2
L2 L1
L1
100 L2
80
CH.+3000
L1
05 ID-TYP-5301
DN
L2
04
05
ID-TYP-5301
ID-TYP-5301
02B
DN
LED STRIP
CL:01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ALIGN
CL:01 CH.+3300
L1
CL:01
80
ALIGN
UP
ALIGN
UP VOID
CH.+3450
80
L2
ID-TYP-5301
8500
27500
AREA 18
01
80
ALIGN
sq.m.
02A ID-TYP-5301
ALIGN
300
JOINERY FULL HEIGHT
100
200
560
300
C
100
950
CH.+3300
L2 ID-TYP-5301
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
L1
L2
L1
L2
100
L1
L2
300 800 200
L1
:L1
Consultant 2 Discipline
L2 ALIGN
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
CL:01
CL:01
CH.+3450
CH.+3300
::::Other Party 1 Responsibility
ELP2/9
::::-
01 8500
ID-TYP-5301
Client
CL:01 CH.+3450
NOT IN ID SCOPE
::-
NOT IN ID SCOPE
::-
RECEPTION
Project
ELP2/9
THE LORD RAMA 9
CL:01 CH.+3000
1000
E F
Drawing title
NOT IN ID SCOPE
REFLECTED CEILING PLAN LEVEL 02 FL. Date generated
01 -
REFLECTED CEILING PLAN (02 FL.) SCALE
1:100
27/03/20
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER
Drawn
7948
35 mm. on original Drawing number
Revision
ID-L02-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
8500
MALE
J WP
A 1000
J H+100
H+100
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
H+100
FEMALE
B H+100
H+100
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
295 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 15
RETAIL AREA 16
RETAIL AREA 17
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
MEP
Shaft
Shaft
:
DN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
NOT IN ID SCOPE
J
J
J
J
วิศวกรงานระบบ
:
MEP
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
J
:
MECHANICAL ENGINEERS :
:
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
H+100
RECYCLE BIN
H+100
Key Plan
CORRIDOR UP
H+100
H+100
H+100
C J
J
J ACCESS CONTROL POINT
OPEN TO BELOW
169 sq.m. 8500
27500
RETAIL AREA 18
J
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
UP
LIFT HALL
J DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:CORRIDOR AREA
Consultant 2 Discipline
345.76 sq.m.
:Consultant 1 Discipline
H+100
J
J
:-
D
Other Party 2 Responsibility
RAMP
H+100
ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
CORRIDOR
::::Other Party 1 Responsibility
FHC.
::-
J 8500
UP
::Client
NOT IN ID SCOPE DN
MEP
RECEPTION
::::Project
Shaft
OPEN TO BELOW
THE LORD RAMA 9 J
1000
E F
Drawing title
NOT IN ID SCOPE
RMU.1 / MEA ROOM
POWER OUTLET PLAN LEVEL 02 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L02-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (02 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
Copyright
8500
8500
8500
FL-02
MALE
FFL.+0000
1000
A
FL-02
B
FEMALE
FFL.+0000
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
5
112 sq.m.
86 sq.m.
RETAIL AREA 16
RETAIL AREA 17
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
MEP
Shaft
Shaft
:
DN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
NOT IN ID SCOPE
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
CORRIDOR
Key Plan
FL-01 FFL+000 SK-01 UP
C
START POINT ACCESS CONTROL POINT
EXISTING . FLOOR CONCRETE
UP
FL-01
8500
27500
18
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
FL-01
FFL+000 SK-01
FL-03
FFL+000 SK-01
FFL+000 SK-01
LIFT HALL
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:CORRIDOR AREA
Consultant 2 Discipline
345.76 sq.m.
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
RAMP ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
CORRIDOR
::::-
FL-01 FFL+000 SK-01
Other Party 1 Responsibility
FHC.
::-
8500
UP
::Client
NOT IN ID SCOPE DN
RECEPTION
MEP
::::Project
Shaft
OPEN TO BELOW
THE LORD RAMA 9 FL-01 FFL+000 SK-01
1000
E F
Drawing title
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
NOT IN ID SCOPE
RMU.1 / MEA ROOM
FLOOR FINISHES PLAN LEVEL 02 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L02-2105
A
Status
01 -
FLOOR FINISHES PLAN (02 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
8500
8500
8500
8500
MALE
1000
A FEMALE
B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
295 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 15
RETAIL AREA 16
RETAIL AREA 17
MEP Shaft
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
:
DN
Shaft
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
NOT IN ID SCOPE
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
Key Plan
CORRIDOR UP
C ACCESS CONTROL POINT
OPEN TO BELOW
169 sq.m.
UP
8500
27500
RETAIL AREA 18
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:CORRIDOR AREA
Consultant 2 Discipline
345.76 sq.m.
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
RAMP ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
CORRIDOR
::::Other Party 1 Responsibility
FHC.
::-
8500
UP
::Client
NOT IN ID SCOPE DN
RECEPTION
MEP
::::Project
Shaft
OPEN TO BELOW
THE LORD RAMA 9
1000
E F
Drawing title
NOT IN ID SCOPE
RMU.1 / MEA ROOM
WALL FINISHES PLAN LEVEL 02 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L02-2106
A
Status
01 -
WALL FINISHES PLAN (02 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
8500
8500
8500
8500
MALE
1000
A B
FEMALE MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 21
295 sq.m.
112 sq.m.
RETAIL AREA 19
RETAIL AREA 20
DN
MEP
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
Shaft
MEP
:
Shaft
8500
MECHANICAL ENGINEERS :
MEP
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
RECYCLE BIN 900
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
900
UP
C OPEN TO BELOW ACCESS CONTROL POINT
350
350
11260
400
184 sq.m.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
OPEN
400
8500
27500
UP
LIFT HALL
RETAIL AREA 22 DN
350
350
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
650
Consultant 3 Discipline
:-
CORRIDOR AREA
Consultant 2 Discipline
1250
347.46 sq.m.
ACCESS CONTROL POINT
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
RAMP ACCESS CONTROL POINT
::-
DISABLED ACCESS / MANUAL OPERATED
::-
CORRIDOR FHC.
8500
MEP
DN
Other Party 1 Responsibility
::UP
Shaft
::Client
::MEP
227 sq.m. RETAIL AREA 23
100 sq.m. RETAIL AREA 24
Shaft
81 sq.m.
MEP Shaft
DN
::Project
RETAIL AREA 25
THE LORD RAMA 9
1000
E F
Drawing title
SETOUT PLAN LEVEL 03 FL. RMU.1 / MEA ROOM ( BUILDING MANAGEMENT ROOM. )
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (03 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L03-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
1
2
3
4
5
6
7
8
59500 8500
8500
8500
8500
8500
8500
8500
DR-02
1000
A B
C2
DR-02
C2
Xref I_ANNOTATE RM_03.dwg
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ
C1
:
01
01
ID-TYP-5401
ID-TYP-5401
01
01
ID-TYP-5402
ID-TYP-5402
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
86 sq.m.
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
RETAIL AREA 21
295 sq.m.
112 sq.m.
RETAIL AREA 19
RETAIL AREA 20
PL-01
PL-01
SK-01
8500
:
DR-03
MECHANICAL ENGINEERS :
NOT IN ID SCOPE
SK-01
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
DR-AR
ภูมิสถาปนิก
:
Key Plan
01
01
01
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
PL-03 SK-01
PL-01
PL-01
SK-01
SK-01
01
01
ID-TYP-5401
ID-TYP-5401
8500
27500
C
C1
PL-07
C3
C3
-
UP
UP
DN
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
184 sq.m.
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
RETAIL AREA 22
Consultant 3 Discipline
:Consultant 2 Discipline
:-
PL-06 -
Consultant 1 Discipline
:Other Party 2 Responsibility
D
C3
PL-01
::-
C3
::-
SK-01
Other Party 1 Responsibility
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
::DR-AR
::Client
::-
8500
DR-03
PL-01
PL-01
SK-01
SK-01
NOT IN ID SCOPE
::Project
100 sq.m.
227 sq.m.
81 sq.m.
RETAIL AREA 24
RETAIL AREA 01 23
THE LORD RAMA 9
RETAIL AREA 25
ID-TYP-5401
01
01
ID-TYP-5402
ID-TYP-5402
E 1000
DR-AR Drawing title
C1
F
C2
PARTITION PLAN LEVEL 03 FL. -
C2
Date generated
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (03 FL.) SCALE
1:100
Xref I_ANNOTATE RM_03.dwg
35 mm. on original Drawing number
Revision
ID-L03-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL:02 CH.+2600
CL:02
CL:02
CH.+2600
CH.+2600
1000
A
CL:02
B
CH.+2600
OWNERS : เจ้าของ
CL:02 CH.+2600
CL:01
:
ARCHITECTS : สถาปนิก
CH.+3000
:
86 sq.m.
NOT IN ID SCOPE
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 21
:
112 sq.m.
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
RETAIL AREA 20 8500
:
MECHANICAL ENGINEERS :
CL:01
01
CH.+3450
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
300
100
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CL CH.+3450
CH.+3450 100
200
L2
L1
JOINERY FULL HEIGHT
L1
L2
L1
L2
L2
L1
L1
100
8500
80
80
UP
CL:01
L1
L1
CH.+3000
CH.+3300
05 L2
02B
DN
DN
LED STRIP
L2 ID-TYP-5301
04
05
ID-TYP-5301
ID-TYP-5301
200
ID-TYP-5301
CL:01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ALIGN
UP
ALIGN
L2
VOID
CL:01
80
ALIGN
L2
ID-TYP-5301
27500
80
ALIGN
01
02A ID-TYP-5301
ALIGN
300
100
560
300
C
Key Plan
CL:01 CH.+3300
950
CL:01 950
CL:01
CH.+3450
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
L1
L2
L2
L1
L2
100
L1
200
L1
:-
CL:01
L1
L2
Consultant 2 Discipline
CH.+3450
:-
950
:950
D
100
300
Consultant 1 Discipline
Other Party 2 Responsibility
CL:01
CL:01
CH.+3450
CH.+3450
::-
CL:01 CH.+3300
::-
8500
::::-
01
CL:01
300
Other Party 1 Responsibility
ELP3/5 ID-TYP-5301
Client
CH.+3450
::-
NOT IN100 ID SCOPE sq.m.
227 sq.m.
RETAIL AREA 24
RETAIL AREA 23
::-
81 sq.m.
Project
RETAIL AREA 25
THE LORD RAMA 9 CL:01 CH.+3300
1000
E F
Drawing title
REFLECTED CEILING PLAN LEVEL 03 FL. Date generated
01 -
REFLECTED CEILING PLAN (03 FL.) SCALE
1:100
27/03/20
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
Drawn
7948
35 mm. on original Drawing number
Revision
ID-L03-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
J WP
A 1000
J H+100
H+100
H+100
B H+100
H+100
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 21
295 sq.m.
112 sq.m.
RETAIL AREA 19
RETAIL AREA 20
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
:
J
J
J
J
MECHANICAL ENGINEERS :
J
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100 H+100
H+100
H+100
H+100
C
8500
27500
J
J
J
J
J
UP
UP
DN
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
184 sq.m. RETAIL AREA 22
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
H+100
H+100
J
H+100
J
:-
D J
Other Party 2 Responsibility
::-
H+100
::Other Party 1 Responsibility
J
::-
8500
J
::Client
::::-
100 sq.m.
227 sq.m.
81 sq.m.
RETAIL AREA 24
RETAIL AREA 23
25
RETAIL AREA 25
Project
THE LORD RAMA 9
H+100
H+100
E 1000
H+100
H+100
H+100
J
F
C
Drawing title
POWER OUTLET PLAN LEVEL 03 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L03-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (03 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
FL-02
7
FFL+000
34000 8500
8500
8500
8
-
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
MALE
1000
A FEMALE
B
Copyright
MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 21 DN
MEP
112 sq.m.
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
Shaft
RETAIL AREA 20
MEP
:
Shaft
8500
MECHANICAL ENGINEERS :
MEP
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
FHC. RECYCLE BIN
START POINT
มัณฑนากร
:
DN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FL-01
Key Plan
FFL+000 SK-01
UP
C ACCESS CONTROL POINT
EXISTING CONCRETE FLOOR UP
8500
27500
FL-01
UP
OPEN
FFL+000 SK-01
FL-01 FL-03
FFL+000 SK-01
LIFT HALL
FFL+000 SK-01 DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA 347.46 sq.m.
Consultant 2 Discipline
ACCESS CONTROL POINT
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
RAMP ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
::-
FL-01
::-
CORRIDOR
FFL+000 SK-01
FHC.
8500
MEP
DN
Other Party 1 Responsibility
::UP
Shaft
::Client
::MEP
100 sq.m.
227 sq.m.
RETAIL AREA 24
RETAIL AREA 23
Shaft
81 sq.m.
MEP Shaft
DN
::Project
RETAIL AREA 25
THE LORD RAMA 9 FL-01 FFL+000 SK-01
1000
E F
Drawing title
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
FLOOR FINISHES PLAN LEVEL 03 FL. RMU.1 / MEA ROOM ( BUILDING MANAGEMENT ROOM. )
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L03-2105
A
Status
01 -
FLOOR FINISHES PLAN (03 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
8500
8500
8500
8500
MALE
1000
A B
FEMALE MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 21
295 sq.m.
112 sq.m.
RETAIL AREA 19
RETAIL AREA 20
DN
MEP
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
Shaft
MEP
:
Shaft
8500
MECHANICAL ENGINEERS :
MEP
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
DN
RECYCLE BIN
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
UP
C OPEN TO BELOW ACCESS CONTROL POINT
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
OPEN
8500
27500
UP
LIFT HALL
184 sq.m. RETAIL AREA 22 DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA 347.46 sq.m.
Consultant 2 Discipline
ACCESS CONTROL POINT
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
RAMP ACCESS CONTROL POINT
::-
DISABLED ACCESS / MANUAL OPERATED
::-
CORRIDOR FHC.
8500
MEP
DN
Other Party 1 Responsibility
::UP
Shaft
::Client
::MEP
227 sq.m. RETAIL AREA 23
100 sq.m. RETAIL AREA 24
Shaft
81 sq.m.
MEP Shaft
DN
::Project
RETAIL AREA 25
THE LORD RAMA 9
1000
E F
Drawing title
WALL FINISHES PLAN LEVEL 03 FL. RMU.1 / MEA ROOM ( BUILDING MANAGEMENT ROOM. )
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L03-2106
A
Status
01 -
WALL FINISHES PLAN (03 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
1000
Ø
12
00 Ø
00 12
Ø
12
00
1700
A
MALE
1700
1700
1700
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
B
FEMALE MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
DN
Shaft
:
NOT IN ID SCOPE
MEP
8500
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า MECHANICAL ENGINEERS :
Shaft
MEP
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 26
RETAIL AREA 27
RETAIL AREA 28
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1700 12
Ø
Ø
12
RECYCLE 900 BIN
1700
CORRIDOR
Key Plan
00
1700
Ø
00 12
900
12 Ø
00
C
1700
00
ACCESS CONTROL POINT
304
294
350
350
11260
400
OPEN
400
8500
UP 27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL
DN
:-
350
350
DN
Consultant 3 Discipline
CORRIDOR AREA
304
347.46 sq.m.
:-
294
Consultant 2 Discipline
:-
Ø
Ø 12 00
12 00
Ø
12 00
Ø
Consultant 1 Discipline
:-
1700
1700
ACCESS CONTROL POINT
D
Other Party 2 Responsibility
12
DN
00 1700
::-
1700
CORRIDOR
::-
MEP Shaft
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 30
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
Other Party 1 Responsibility
UP
FHC.
8500
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
::::-
UP
Client
::-
NOT IN ID SCOPE MEP Shaft
::-
DN
MEP
2
Shaft
Project
THE LORD RAMA 9
F
Ø
12 00
Ø
12
00
1700
Ø 12 00
1700
1000
E
1700
Drawing title
1700
UTILITIES NOT IN ID SCOPE
SETOUT PLAN LEVEL 04 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (04 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L04-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
1
2
3
4
5
6
7
8
59500 8500
8500
8500
8500
8500
8500
8500
MALE
DR-02
1000
A
C2
B
DR-02
C2
FEMALE MEP
C1
Shaft
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
01
01
ID-TYP-5402
ID-TYP-5402
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 29
:
DR-03
MEP
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
DN
Shaft
8500
:
PL-01
PL-01
PL-01
SK-01
SK-01
SK-01
NOT IN ID SCOPE
MEP
112 sq.m.
112 sq.m.
RETAIL AREA 26
RETAIL AREA 27
RETAIL AREA 28
วิศวกรงานระบบ
:
Shaft
MEP
377 sq.m.
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
UP
Shaft
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
01
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
DR-AR
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
RECYCLE BIN
Key Plan
CORRIDOR
PL-03 SK-01
C
C1
PL-07
C3
PL-06
C3
-
-
PL-06
ACCESSCONTROL POINT
DR-07
UP
UP
OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
LIFT HALL DN
DN
PL-01
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
SK-01
:-
DR-07
Consultant 2 Discipline
CORRIDOR AREA 347.46 sq.m.
:Consultant 1 Discipline
ACCESS CONTROL POINT PL-06
:-
-
D
Other Party 2 Responsibility
C3
C1
C3
PL-06
DN
-
01
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
::::-
CORRIDOR
Other Party 1 Responsibility
UP
FHC. DR-AR
::::-
8500
DR-03
PL-01
377 sq.m.
112 sq.m.
SK-01
RETAIL AREA 30
RETAIL AREA 31
PL-01
112 sq.m.
SK-01
RETAIL AREA 32
PL-01
MEP Shaft
86 sq.m.
SK-01
UP NOT IN ID SCOPE
RETAIL AREA 33 MEP Shaft
DN
Client
::::Project
MEP
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
Shaft
01
01
ID-TYP-5402
ID-TYP-5402
E
THE LORD RAMA 9
1000
DR-AR
C1
F
Drawing title
C2
PARTITION PLAN LEVEL 04 FL. -
C2 UTILITIES NOT IN ID SCOPE
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (04 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L04-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL:02 CH.+2600
CL:02
CL:02
CH.+2600
CH.+2600
1000
A
CL:02
B
CH.+2600
OWNERS : เจ้าของ
CL:02 CH.+2600
CL:01
:
ARCHITECTS : สถาปนิก
CH.+3000
86 sq.m.
:
RETAIL AREA 29
NOT IN ID SCOPE
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
CL:01
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
MECHANICAL ENGINEERS :
01
CH.+3450
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
INTERIOR DESIGNER :
300
100
:
มัณฑนากร
:
LANDSCAPE DESIGNER :
CH.+3450 100
200
L2
L1
L1
L2
L1
L2
L2
L1
L1
100
8500
80
80
UP
CL:01
L1
L1
CH.+3000
CH.+3300
05 DN
L2
02B
DN
LED STRIP
L2 ID-TYP-5301
04
05
ID-TYP-5301
ID-TYP-5301
200
ID-TYP-5301
CL:01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ALIGN
UP
ALIGN
L2
VOID
CL:01
80
ALIGN
L2
ID-TYP-5301
27500
80
ALIGN
01
02A ID-TYP-5301
ALIGN
300
JOINERY FULL HEIGHT
100
560
300
C
Key Plan
CH.+3300
950
CH.+3450 950
CL:01
ภูมิสถาปนิก
:
CL:01
CL
CL:01
วิศวกรงานระบบ
:
CH.+3450
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
L1
L2
L2
L1
L2
100
L1
200
L1
:-
CL:01
L1
L2
Consultant 2 Discipline
CH.+3450
:-
950
:950
D
100
300
Consultant 1 Discipline
Other Party 2 Responsibility
CL:01
CL:01
CH.+3450
CH.+3450
::-
CL:01 CH.+3300
::Other Party 1 Responsibility
::-
300
ELP4/5
::-
01 8500
CL:01
ID-TYP-5301
Client
CH.+3450
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::-
NOT IN ID SCOPE
::-
NOT IN ID SCOPE 2
Project
THE LORD RAMA 9 CL:01 CH.+3300
1000
E F
Drawing title
REFLECTED CEILING PLAN LEVEL 04 FL. Date generated
NOT IN ID SCOPE
01 -
REFLECTED CEILING PLAN (04 FL.) SCALE
1:100
27/03/20
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
Drawn
7948
35 mm. on original Drawing number
Revision
ID-L04-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
MALE
J WP 1000
A H+100
H+100
J
H+100
B
FEMALE
H+100
H+100
MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
DN
Shaft
8500
J
J
J
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
MECHANICAL ENGINEERS :
Shaft
J
RETAIL AREA 26
:
NOT IN ID SCOPE
MEP
J
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
MEP
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
H+100 H+100
H+100
H+100
RECYCLE BIN
H+100
CORRIDOR
Key Plan
H+100
C J
J
J ACCESS CONTROL POINT
UP
OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
J
J
LIFT HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA
Consultant 2 Discipline
347.46 sq.m.
:-
ACCESS CONTROL POINT
H+100
H+100
H+100
J
H+100
Consultant 1 Discipline
J
:-
D J
Other Party 2 Responsibility
DN
::-
H+100 CORRIDOR
::Other Party 1 Responsibility
UP
FHC.
::-
J MEP 8500
Shaft
J
J
J
J
::-
UP
Client
J
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 30
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::-
NOT IN ID SCOPE MEP Shaft
::-
DN
MEP
2
Shaft
Project
THE LORD RAMA 9
H+100
E 1000
H+100
H+100
H+100
H+100
F
Drawing title
UTILITIES NOT IN ID SCOPE
POWER OUTLET PLAN LEVEL 04 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L04-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (04 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
8
8500
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
Copyright
8500
8500
FL-02 FFL+000
MALE -
1000
A
FL-02
B
FFL+000
FEMALE
-
MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
DN
Shaft
NOT IN ID SCOPE
MEP
8500
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
Shaft
MEP
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
วิศวกรงานระบบ
:
UP
Shaft
:
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
FHC. RECYCLE BIN
C
CORRIDOR
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FL-01
Key Plan
FFL+000 SK-01
START POINT ACCESS CONTROL POINT
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
UP
OPEN
FL-01
8500
27500
EXISTING CONCRETE FLOOR
FL-01
FFL+000 SK-01
FL-03
FFL+000 SK-01
FFL+000 SK-01
LIFT HALL
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA
Consultant 2 Discipline
347.46 sq.m.
:-
ACCESS CONTROL POINT
Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
DN
FL-01 FFL+000 SK-01
CORRIDOR
::-
UP
FHC.
MEP 8500
Shaft
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::-
::UP NOT IN ID SCOPE
MEP Shaft
Other Party 1 Responsibility
DN
MEP
::Client
::::Project
Shaft
THE LORD RAMA 9 FL-01 FFL+000 SK-01
1000
E F
Drawing title
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
UTILITIES NOT IN ID SCOPE
FLOOR FINISHES PLAN LEVEL 04 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L04-2105
A
Status
01 -
FLOOR FINISHES PLAN (04 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
1000
A B
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 26
RETAIL AREA 27
RETAIL AREA 28
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
C
UP
UP
DN
DN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
NOT IN ID SCOPE
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
::::Other Party 1 Responsibility
::8500
::Client
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 30
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::-
NOT IN ID SCOPE
::-
2
Project
THE LORD RAMA 9
1000
E F
Drawing title
WALL FINISHES PLAN LEVEL 04 FL. Date generated
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L04-2106
A
Status
01 -
WALL FINISHES PLAN (04 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
12
00 Ø
00 12
00
12
Ø
MALE
1700
1700
1000
Ø
8500
1700
1700
A
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
B
FEMALE
MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
MEP Shaft
NOT IN ID SCOPE
MEP
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
:
MECHANICAL ENGINEERS :
UP
:
1700
Key Plan
1
DN
900
Ø
ภูมิสถาปนิก
:
C
1700
Ø
LANDSCAPE DESIGNER :
0 20 1700
Ø
00 12 Ø
UP
RECYCLE BIN
1700
มัณฑนากร
:
FHC.
900
00 12
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : INTERIOR DESIGNER :
00 12
วิศวกรงานระบบ
:
Shaft
RETAIL AREA 26
:
DN
Shaft
ACCESS CONTROL POINT
304
294
350
350
11260
400
OPEN
400
8500
UP 27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL
DN
:-
350
350
DN
Consultant 3 Discipline
CORRIDOR AREA
304
57.88 sq.m.
:-
294
Consultant 2 Discipline
:-
Ø
12
Ø 00
12
Ø 00
Consultant 1 Discipline
:-
1700
1700
ACCESS CONTROL POINT
D
Other Party 2 Responsibility
Ø
12
12
00
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
00 1700
::-
1700
::-
RAMP
FHC.
MEP 8500
Shaft
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 30
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::UP
MEP Shaft
::Client
NOT IN ID SCOPE
MEP
Other Party 1 Responsibility
DN
Shaft
::::Project
THE LORD RAMA 9
F
12
Ø 00
Ø
12
00
12
00
1700
Ø
1700
1000
E
1700
Drawing title
1700
SETOUT PLAN LEVEL 05 FL. -
UTILITIES
Date generated
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (05 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L05-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
1
2
3
4
5
6
7
8
59500 8500
8500
8500
8500
8500
8500
8500
MALE DR-02
1000
A
C2
B
DR-02
C2
FEMALE
MEP Shaft
C1 01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
01
01
ID-TYP-5402
ID-TYP-5402
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
86 sq.m.
:
RETAIL AREA 29
MEP
PL-01
PL-01
PL-01
SK-01
SK-01
SK-01
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
:
MECHANICAL ENGINEERS :
MEP
NOT IN ID SCOPE
Shaft
MEP
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
Shaft
RETAIL AREA 26
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
DN
DR-03 Shaft
8500
NOTES
:
UP
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
01
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
LANDSCAPE DESIGNER :
DR-AR UP
ภูมิสถาปนิก
:
Key Plan
RECYCLE BIN DN
PL-03 SK-01
C
C1
PL-07
C3
PL-06
C3
PL-06
-
ACCESS CONTROL POINT
SK-01 DR-07
UP
UP OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
LIFT HALL
:-
DN
DN
PL-01
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
SK-01
:Consultant 2 Discipline
DR-07
CORRIDOR AREA
:-
57.88 sq.m.
Consultant 1 Discipline
ACCESS PL-06 CONTROL POINT
:-
-
Other Party 2 Responsibility
D
C1
C3
C3
::-
PL-06 -
01
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
::Other Party 1 Responsibility
RAMP
FHC.
::-
DR-AR
MEP 8500
DR-03 Shaft
PL-01
377 sq.m.
112 sq.m.
SK-01
RETAIL AREA 30
RETAIL AREA 31
PL-01
112 sq.m.
SK-01
RETAIL AREA 32
PL-01
86 sq.m.
SK-01
Client
UP
NOT IN ID SCOPE
RETAIL AREA 33
MEP Shaft
MEP
::-
DN
::::Project
Shaft
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
01
01
ID-TYP-5402
ID-TYP-5402
E
THE LORD RAMA 9
1000
DR-AR Drawing title
C1
F
C2
PARTITION PLAN LEVEL 05 FL. -
C2
Date generated
UTILITIES
27/03/20
NOT IN ID SCOPE
Scale
Project number
7948 -
PARTITION PLAN (05 FL.) SCALE
1:100
Checked
Approved
-
-
MF.
1:100 @ A2 sheet size
01
Drawn
35 mm. on original Drawing number
Revision
ID-L05-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL:02 CH.+2600
CL:02
CL:02
CH.+2600
CH.+2600
1000
A
CL:02
B
CH.+2600
OWNERS : เจ้าของ
CL:02 CH.+2600
CL:01
:
ARCHITECTS : สถาปนิก
CH.+3000
86 sq.m.
:
RETAIL AREA 29
NOT IN ID SCOPE
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE
CL:01
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
MECHANICAL ENGINEERS :
01
CH.+3450
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
300
100
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CL CH.+3450
CH.+3450 100
200
L2
L1
L1
L2
L1
L2
L2
L1
L1
100
8500
80
80
UP
CL:01
L1
L1
CH.+3000
CH.+3300
05
04
05 DN
L2
DN
LED STRIP
ID-TYP-5301
ID-TYP-5301
02B L2 ID-TYP-5301
200
ID-TYP-5301
CL:01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ALIGN
UP
ALIGN
L2
VOID
CL:01
80
ALIGN
L2
ID-TYP-5301
27500
80
ALIGN
01
02A ID-TYP-5301
ALIGN
300
JOINERY FULL HEIGHT
100
560
300
C
Key Plan
CL:01 CH.+3300
950
CL:01 950
CL:01
CH.+3450
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
L1
L2
L2
L1
L2
100
L1
200
L1
:-
CL:01
L1
L2
Consultant 2 Discipline
CH.+3450
:-
950
:950
D
100
300
Consultant 1 Discipline
Other Party 2 Responsibility
CL:01
CL:01
CH.+3450
CH.+3450
::-
CL:01 CH.+3300
::-
300
Other Party 1 Responsibility
::-
01 8500
CL:01
ID-TYP-5301
Client
CH.+3450
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
::-
NOT IN ID SCOPE
::::-
NOT IN ID SCOPE
Project
THE LORD RAMA 9 CL:01 CH.+3300
1000
E F
Drawing title
REFLECTED CEILING PLAN LEVEL 05 FL. Date generated
NOT IN ID SCOPE
01 -
REFLECTED CEILING PLAN (05 FL.) SCALE
1:100
27/03/20
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM
Drawn
7948
35 mm. on original Drawing number
Revision
ID-L05-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
8500
WP
H +900
MALE J WP
A 1000
J H+100
H+100
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
H+100
B H+100
FEMALE
MEP
H+100
Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
MEP J
J
J
J
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 26
RETAIL AREA 27
RETAIL AREA 28
NOT IN ID SCOPE
Shaft
J
:
DN
Shaft
MEP
:
MECHANICAL ENGINEERS :
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
RECYCLE BIN
H+100
วิศวกรงานระบบ
:
Shaft
Key Plan
H+100 DN
H+100
H+100
H+100
H+100
C J
J
J ACCESS CONTROL POINT
UP OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
J
LIFT HALL
J DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA 57.88 sq.m.
Consultant 2 Discipline
:-
ACCESS CONTROL POINT
H+100
H+100
H+100
J
H+100
Consultant 1 Discipline
J
:-
D J
Other Party 2 Responsibility
::-
H+100
::-
RAMP
FHC.
J
MEP
8500
Shaft
J
J
J
J
::UP
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 31
RETAIL AREA 32
RETAIL AREA 33
NOT IN ID SCOPE
MEP MEP
Shaft
::Client
J
RETAIL AREA 30
Other Party 1 Responsibility
DN
Shaft
::::Project
THE LORD RAMA 9
H+100
E 1000
H+100
H+100
H+100
H+100
F
Drawing title
POWER OUTLET PLAN LEVEL 05 FL. -
UTILITIES
Date generated
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L05-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (05 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
FL-02 FFL+000
MALE -
1000
A
FL-02
B
FFL+000
FEMALE
-
MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 29
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
DN
Shaft
:
NOT IN ID SCOPE
MEP
8500
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า MECHANICAL ENGINEERS :
Shaft
MEP
112 sq.m.
112 sq.m.
RETAIL AREA 27
RETAIL AREA 28
UP
Shaft
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
FHC. RECYCLE BIN
C
CORRIDOR
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FL-01
Key Plan
FFL+000 SK-01
START POINT ACCESS CONTROL POINT
EXISTING CONCRETE FLOOR 8500
27500
UP
OPEN
FL-01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
FL-01
FFL+000 SK-01
FL-03
FFL+000 SK-01
FFL+000 SK-01
LIFT HALL
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA
Consultant 2 Discipline
347.46 sq.m.
:-
ACCESS CONTROL POINT
Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
DN
FL-01 FFL+000 SK-01
CORRIDOR
::-
MEP 8500
Shaft
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 32
RETAIL AREA 33
Other Party 1 Responsibility
UP
FHC.
RETAIL AREA 31
::-
::::-
UP
Client
::-
NOT IN ID SCOPE MEP Shaft
::-
DN
MEP
2
Shaft
Project
THE LORD RAMA 9 FL-01 FFL+000 SK-01
1000
E F
Drawing title
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
UTILITIES NOT IN ID SCOPE
FLOOR FINISHES PLAN LEVEL 05 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L05-2105
A
Status
01 -
FLOOR FINISHES PLAN (05 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
MALE
1000
A B
FEMALE
MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก
86 sq.m.
:
RETAIL AREA 37
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
MEP Shaft
377 sq.m.
112 sq.m.
112 sq.m.
RETAIL AREA 34
RETAIL AREA 35
RETAIL AREA 36
:
DN
Shaft
:
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
MEP
วิศวกรงานระบบ
:
Shaft
UP
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
RECYCLE BIN
Key Plan
DN
C ACCESS CONTROL POINT
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP OPEN
8500
27500
UP
LIFT HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
CORRIDOR AREA 57.88 sq.m.
Consultant 2 Discipline
:-
ACCESS CONTROL POINT
Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
::::-
MEP 8500
Shaft
377 sq.m.
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 38
RETAIL AREA 39
RETAIL AREA 40
RETAIL AREA 41
Other Party 1 Responsibility
RAMP
FHC.
::::-
UP
Client
::-
NOT IN ID SCOPE
MEP MEP
Shaft
::-
DN
Shaft
2
Project
THE LORD RAMA 9
1000
E F
Drawing title
NOT IN ID SCOPE
UTILITIES
WALL FINISHES PLAN LEVEL 05 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L05-2106
A
Status
01 -
WALL FINISHES PLAN (05 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
12
00 Ø
00 12
Ø
12
00
MALE
1700
1700
1000
Ø
8500
1700
1700
A
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
B
FEMALE MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
MEP Shaft
377 sq.m.
:
DN
Shaft
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
Shaft
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
RETAIL AREA 42
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
900
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1700 12
Ø
Ø
12
RECYCLE BIN
1700
Key Plan
CORRIDOR
00
1700
Ø
00 12
DN
900
12 Ø
00
C
1700
00
ACCESS CONTROL POINT
304
294
350
350
11260
400
OPEN
400
8500
UP 27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL
DN
:-
350
350
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
304
:-
294
Consultant 2 Discipline
ACCESS CONTROL POINT
:-
D Ø
Ø 12 00
12 00
Ø
12 00
Ø
:-
1700
1700
Consultant 1 Discipline
Other Party 2 Responsibility
12
00
DN
1700
1700
CORRIDOR
::-
RAMP
FHC.
8500
377 sq.m. RETAIL AREA 46
::-
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 47
RETAIL AREA 48
RETAIL AREA 49
MEP Shaft
::UP
Shaft
::Client
NOT IN ID SCOPE MEP
Other Party 1 Responsibility
DN
::::Project
THE LORD RAMA 9
MEP Shaft
F
Ø
12 00
Ø
12
00
1700
Ø 12 00
1700
1000
E
1700
Drawing title
1700
UTILITIES NOT IN ID SCOPE
SETOUT PLAN LEVEL 06 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
SETOUT PLAN (06 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L06-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
8500
MALE DR-02A
1000
A
C2
B
DR-02A
C2
FEMALE MEP
C1
Shaft
01
ID-TYP-5401
ID-TYP-5401
8500
01
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
01
01
ID-TYP-5402
ID-TYP-5402
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
PL-01
PL-01
PL-01
SK-01
SK-01
SK-01
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
DR-03 MEP Shaft
:
DN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
MEP Shaft
วิศวกรงานระบบ
:
MEP
377 sq.m.
:
MECHANICAL ENGINEERS :
UP
Shaft
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
RETAIL AREA 42
:
INTERIOR DESIGNER : FHC.
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
DR-AR
มัณฑนากร
:
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
Key Plan
CORRIDOR DN
PL-03 SK-01
C
C1
PL-07
C3
C3
PL-06
PL-06
-
ACCESS CONTROL POINT
SK-01
DR-07
UP OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL DN
DN
PL-01
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
SK-01
Consultant 3 Discipline
DR-07
:Consultant 2 Discipline
ACCESS CONTROL POINT
:-
PL-06
Consultant 1 Discipline
-
:-
D
Other Party 2 Responsibility
C1
C3
C3
PL-06
DN
::-
-
01
01
01
01
01
ID-TYP-5401
ID-TYP-5401
ID-TYP-5401
ID-TYP-5402
ID-TYP-5403
CORRIDOR
::-
RAMP
FHC.
::-
DR-AR
8500
377 sq.m.
112 sq.m.
RETAIL AREA 46
RETAIL AREA 47
PL-01 SK-01
112 sq.m. RETAIL AREA 48
PL-01 SK-01
DR-03 MEP Shaft
86 sq.m. RETAIL AREA 49
PL-01
UP
MEP Shaft
::Client
NOT IN ID SCOPE
SK-01
Other Party 1 Responsibility
DN
::::Project
01
01
ID-TYP-5401
ID-TYP-5401
THE LORD RAMA 9
MEP
01
01
ID-TYP-5402
ID-TYP-5402
E
Shaft
1000
DR-AR
C1
F
Drawing title
C2
C2 UTILITIES NOT IN ID SCOPE
PARTITION PLAN LEVEL 06 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948 01 -
PARTITION PLAN (06 FL.) SCALE
1:100
35 mm. on original Drawing number
Revision
ID-L06-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
CL:02 CH.+2600
CL:02
CL:02
CH.+2600
CH.+2600
1000
A
CL:02
B
CH.+2600
OWNERS : เจ้าของ
CL:02 CH.+2600
CL:01
:
ARCHITECTS : สถาปนิก
CH.+3000
112 sq.m.
112 sq.m.
44 NOTRETAIL IN IDAREA SCOPE
RETAIL AREA 43
:
86 sq.m.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
RETAIL AREA 45
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
NOT IN ID SCOPE CL:01
MECHANICAL ENGINEERS :
01
CH.+3450
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
300
100
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
CL:01
CL CH.+3450
CH.+3450 100
560
300
C
200
100
JOINERY FULL HEIGHT
L2
L1
L1
L2
L1
L2
L2
L1
L1
100
8500
80
80
UP
CH.+3300
L1
CH.+3000
L1
05 DN
L2
02B
DN
LED STRIP
L2 ID-TYP-5301
04
05
ID-TYP-5301
ID-TYP-5301
200
ID-TYP-5301
CL:01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ALIGN
CL:01
UP
ALIGN
L2
VOID
CL:01
80
ALIGN
L2
ID-TYP-5301
27500
80
ALIGN
01
02A ID-TYP-5301
ALIGN
300
Key Plan
CH.+3300
950
CL:01 950
CL:01
ภูมิสถาปนิก
:
CH.+3450
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
L1
L2
L2
L1
L2
100
L1
200
L1
:-
CL:01
L1
L2
Consultant 2 Discipline
CH.+3450
:-
950
:950
D
100
300
Consultant 1 Discipline
Other Party 2 Responsibility
CL:01
CL:01
CH.+3450
CH.+3450
::-
CL:01 CH.+3300
::Other Party 1 Responsibility
300
ELP6/9
::-
8500
01
112 sq.m.
112 sq.m.
RETAIL AREA 47
RETAIL AREA 48
86 sq.m. CL:01
::-
ID-TYP-5301
Client
CH.+3450 RETAIL AREA 49
NOT IN ID SCOPE
::::-
NOT IN ID SCOPE
Project
THE LORD RAMA 9 CL:01 CH.+3300
1000
E F
Drawing title
REFLECTED CEILING PLAN LEVEL 06 FL. Date generated
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (06 FL.) SCALE
1:100
27/03/20
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
REMARK : ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY LIGHTING DESIGNER * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
Drawn
7948
35 mm. on original Drawing number
Revision
ID-L06-2103
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
8
8500
8500
8500
8500
8500
8500
MALE
J WP
A 1000
J H+100
H+100
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
Copyright
H+100
B
FEMALE
H+100
H+100
MEP Shaft
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
8500
J
J
J
J
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
MEP
J
Shaft
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
377 sq.m.
UP
Shaft
RETAIL AREA 42
:
DN
Shaft
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
H+100
RECYCLE BIN
H+100
Key Plan
CORRIDOR DN
H+100
H+100
H+100
H+100
C J
J
J ACCESS CONTROL POINT
UP OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
J
LIFT HALL
J DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline ACCESS CONTROL POINT
:Consultant 1 Discipline
H+100
H+100
H+100
J
H+100
J
:-
D J
Other Party 2 Responsibility
DN
H+100
::-
CORRIDOR
::-
RAMP
FHC.
::-
J 8500
377 sq.m. J
RETAIL AREA 46
112 sq.m. J
J
RETAIL AREA 47
112 sq.m. J
RETAIL AREA 48
MEP
86 sq.m. J
Shaft
RETAIL AREA 49
UP
Shaft
::Client
NOT IN ID SCOPE MEP
Other Party 1 Responsibility
DN
::::Project
THE LORD RAMA 9
MEP Shaft
H+100
E 1000
H+100
H+100
H+100
H+100
F
Drawing title
UTILITIES NOT IN ID SCOPE
POWER OUTLET PLAN LEVEL 06 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L06-2104
A
Status
01 -
POWER OUTLET PLAN PLAN (06 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
FL-02 FFL+000
MALE
-
1000
A
FL-02
B
FFL+000
FEMALE
-
MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
8500
:
DN
Shaft
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
NOT IN ID SCOPE
MEP Shaft
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
Shaft
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
CORRIDOR
FL-01
Key Plan
FFL+000 SK-01 DN
C
START POINT ACCESS CONTROL POINT
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
UP
FL-01
8500
27500
EXISTING CONCRETE FLOOR
FL-01
OPEN
FFL+000 SK-01
FL-03
FFL+000 SK-01
LIFT HALL
FFL+000 SK-01
DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline ACCESS CONTROL POINT
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
START POINT FL-01
DN
::-
CORRIDOR
::-
FFL+000 SK-01
8500
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 47
RETAIL AREA 48
RETAIL AREA 49
MEP Shaft
Other Party 1 Responsibility
RAMP
FHC.
::::-
UP
Client
::-
NOT IN ID SCOPE MEP Shaft
::-
DN
2
Project
THE LORD RAMA 9
MEP Shaft
FL-01 FFL+000 SK-01
1000
E F
Drawing title
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
UTILITIES NOT IN ID SCOPE
FLOOR FINISHES PLAN LEVEL 06 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L06-2105
A
Status
01 -
FLOOR FINISHES PLAN (06 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
1
2
3
4
5
6
7
Copyright
8
© THE BEAUMONT PARTNERSHIP 2009
NOTES
59500 8500
8500
8500
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
MALE
1000
A B
FEMALE MEP Shaft
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 43
RETAIL AREA 44
RETAIL AREA 45
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
MEP
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
377 sq.m.
:
NOT IN ID SCOPE
MEP Shaft
:
DN
Shaft
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
MEP
UP
Shaft
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
RETAIL AREA 42
:
INTERIOR DESIGNER :
มัณฑนากร
:
FHC.
UP
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
: RECYCLE BIN
Key Plan
CORRIDOR DN
C ACCESS CONTROL POINT
UP OPEN
8500
27500
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
UP
LIFT HALL DN
DN
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline ACCESS CONTROL POINT
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
DN
::-
CORRIDOR
::-
8500
377 sq.m. RETAIL AREA 46
112 sq.m.
112 sq.m.
86 sq.m.
RETAIL AREA 47
RETAIL AREA 48
RETAIL AREA 49
MEP Shaft
Other Party 1 Responsibility
RAMP
FHC.
::::-
UP
Client
::-
NOT IN ID SCOPE MEP Shaft
::-
DN
2500
1000
Project
THE LORD RAMA 9
MEP Shaft
63 1000
E F
Drawing title
UTILITIES NOT IN ID SCOPE
WALL FINISHES PLAN LEVEL 06 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L06-2106
A
Status
01 -
WALL FINISHES PLAN (06 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
8500
6 8500
7
8
68000 8500
9
8500
8500
10 8500
NOT IN ID SCOPE
© THE BEAUMONT PARTNERSHIP 2009
11
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
NOT IN ID SCOPE
1000
A B
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
:
JO-02
NOT IN ID SCOPE
8500
ID-TYP-7002
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
NOT IN ID SCOPE
Key Plan
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
UP
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::-
NOT IN ID SCOPE
Other Party 1 Responsibility
::::-
8500
Client
NOT IN ID SCOPE
NOT IN ID SCOPE
::::Project
THE LORD RAMA 9
1000
E Drawing title
FURNITURE PLAN LEVEL 07 -
F
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2101
A
Status
01 -
FURNITURE PLAN (07 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
8500
6
7
8
68000
8500
8500
9
8500
10
8500
8500
11
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
FEMALE NOT IN ID SCOPE
NOT IN ID SCOPE
1000
A
DIS.
B MEP
OWNERS : เจ้าของ
MALE
Shaft
:
5650
BOH WASTE FOOD + WASHING MACHINE
7200
7150
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
NOT IN ID SCOPE
DN
SERVICE
59 sq.m.
MEP
NOT IN ID SCOPE
8500
900
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
900
SANITARY ENGINEERS :
42.5 sq.m.
RECYCLE BIN
วิศวกรงานระบบ
:
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER : FIRE COMPARTMENT AREA
NOT IN ID SCOPE
Cafeteria Area 1457 sq.m. ACCESS CONTROL POINT
Key Plan
400
DISABLED ACCESS / MANUAL OPERATED
ภูมิสถาปนิก
:
1900
FHC.
1260
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ACCESS CONTROL POINT
460
350
350
11260
OPEN
400
NOT IN ID SCOPE
400
8500
27500
UP
LIFT HALL
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN 350
350
Consultant 3 Discipline
460
:Consultant 2 Discipline
1260
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::-
FHC.
DISABLED ACCESS / MANUAL OPERATED
UP
::-
NOT IN ID SCOPE
Other Party 1 Responsibility
1900
ACCESS CONTROL POINT
400
DN
::::Client
MEP 8500
Shaft
NOT IN ID SCOPE
NOT IN ID SCOPE MEP Shaft
::::Project
DN
5650
SERVICE 7200
MEP
THE LORD RAMA 9
42.5 sq.m.
1000
E Drawing title
F
SETOUT PLAN LEVEL 07 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2102
A
Status
01 -
SETOUT PLAN (07 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
6
8500
7
8
68000
8500
8500
9
8500
8500
10 8500
11
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
FEMALE NOT IN ID SCOPE
NOT IN ID SCOPE
DR-02A
C2
C2
1000
A
C2
B
C2
C2
DIS.
DR-04
MEP
C1
OWNERS : เจ้าของ
MALE
Shaft
:
BOH WASTE FOOD + WASHING MACHINE
DR-02A
ARCHITECTS : สถาปนิก
PL-03
:
PL-03
SK-01
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
SK-01
PL-02
SERVICE PL-03
59 sq.m.
MEP
NOT IN ID SCOPE
SK-01
8500
SK-01
DN
DR-03
:
NOT IN ID SCOPE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
42.5 sq.m.
RECYCLE BIN
DR-AR DR-AR FIRE COMPARTMENT AREA
FHC.
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
NOT IN ID SCOPE
Cafeteria Area
Key Plan
DR-AR
1457 sq.m. DISABLED ACCESS / MANUAL OPERATED
วิศวกรงานระบบ
:
ACCESS CONTROL POINT
PL-03 SK-01
C
C1
C3
C3 PL-06 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ACCESS CONTROL POINT
OPEN
8500
27500
UP
LIFT HALL
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
:Consultant 2 Discipline
PL-06
PL-07
:-
-
Consultant 1 Discipline
-
:Other Party 2 Responsibility
D
C1
C3
::-
FHC.
C3
DN ACCESS CONTROL POINT
PL-03
::-
SK-01
DISABLED ACCESS / MANUAL OPERATED
UP
NOT IN ID SCOPE
Other Party 1 Responsibility
DR-AR
DR-AR
::::Client
MEP
8500
DR-03 Shaft
NOT IN ID SCOPE
NOT IN ID SCOPE MEP Shaft
PL-02
::::Project
DN
PL-03
SK-01
SK-01
MEP
SERVICE
THE LORD RAMA 9
42.5 sq.m.
1000
E Drawing title
C1
F
C2
C2
C2
C2
C2
C2
PARTITION PLAN LEVEL 07 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2103
A
Status
01 -
PARTITION PLAN (07 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
3
4
5
8500
8500
AP-7-KMF1
Copyright
CL:02
7
8
CH.+2600
68000
8500
8500
9
8500
CL:01
10
8500
NOT IN ID SCOPE
CL:01
CL:01
CH.+3450
CH.+3450
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
AP-7-KMF5
AP-7-KMF4 NOT IN ID SCOPE
CL-02
300
11
8500
AP-7-PF1
AP-7-KMF3
AP-7-KMF2 CH.+3450
AP-7-FF1
6
CL:01
CL:01
CH.+3450
CH.+3450
CH.+2600
AP-7-FF3 CL-02
CL-02
CH.+2600
CH.+2600
A 1000
CL:01 CL:01
B
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
CH.+2900
CH.+3300
80
R7 5 99 R2
L1
11500
L2
02
R
ID-TYP-5301
06 10
ID-TYP-5301
00
L2
R929
L2
CL:01
NOT IN ID SCOPE
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
L1
CH.+3300 L2
JOINERY FULL HEIGHT
00
L2
R1 1
NOT IN ID SCOPE
CH.+3300
1600
L1
L1
600
CH.+3100
01
6337
R1
L1
L1
L2
L2
L1
4
CH.+3300
L2
80
CL:01
L2
L1
ALIGN
CH.+3300
L2
ALIGN
ALIGN
CL:01
ALIGN
ALIGN
CL:01
CH.+3000
04
68
DN
CH.+3300
L1
ID-TYP-5301
L2
00 R4
50
1162
R5
CH.+2400
0 R4
CL:01
R
Consultant 2 Discipline
L2
L2
Consultant 1 Discipline
:-
CL:02
Other Party 2 Responsibility
CH.+2400
L1
L1
L1
CH.+3300
CL:01
9
NOT IN ID SCOPE
NOT IN ID SCOPE
CL:01
GROOVE LINE
51
Other Party 1 Responsibility
7 62
L2
L2
R
AP-7-KEF6
CL:01
CH.+3100
L1
9
11
8500
GROOVE LINE
ID-TYP-5301
CL:01
L2
L2 L1
CL:01
CL:01
CH.+3450
CH.+3300
35 R21
L1
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
L1
R7
80
39
AP-7-KEF7
::Project
L2
R
CH.+3300
NOT IN ID SCOPE
6
34 17
CL:01
THE LORD RAMA 9
L1 L2
L1 L1
CL:01
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
::-
L1
R1
L2
L2
Client
L1
CL:01 CH.+3300
CH.+3300
NOT IN ID SCOPE
CH.+2900
3
LED STRIP LIGHT LINEAR NOT EXCEED 30 MM.
::::-
CH.+3100
5 94 R1
R2
02
CL:01
::::-
L2
4 13
L1 R1
3 R9
:-
L2
2
L2
CH.+3300
0
CL:01 CH.+3450
3490
1700
CL:02
2
:-
CL:01
630
R 85
L1
L1
CH.+3150
7 R182
D
CL:02 CH.+2400
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
03 7 53 R1
CL:02 CH.+2400
CH.+3450
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
:-
L1 ID-TYP-5301
CL:01
CH.+3300
CL:01
05
ID-TYP-5301
6 R1
R1 21 8
L2
L2
200
8500
27500
06 ID-TYP-5301
80
L1
L1
CL:01
80
11600
R5
0 60 R
L2
UP
L1
L1
CL:02
L2
NOT IN ID SCOPE
4150
CH.+2400
80
L1
L2
Key Plan
50
L1
ภูมิสถาปนิก
:
L2
L2 L2
AP-7-KEF5
LANDSCAPE DESIGNER :
L2
L2
L1
มัณฑนากร
:
GROOVE LINE
ID-TYP-5301
71
4050
50
0
R9
L2
INTERIOR DESIGNER :
L1
R5
2 R6
วิศวกรสุขาภิบาล
CL:02
3500
CL:02 CH.+2400
L1
C
R4
00
วิศวกรงานระบบ
:
SANITARY ENGINEERS :
20 R24
CH.+3100
03
11600
CL:01
CL:01
CL:01 1300
R4
L1
53 R7
GROOVE LINE
AP-7-KEF4
:
300
CL:01 CH.+3100
L1
MECHANICAL ENGINEERS :
L1
CL:01 CH.+3300
CH.+3450
NOT IN ID SCOPE
65
L2
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
CH.+3300
ID-TYP-5301
L1
NOT IN ID SCOPE
CL:01
GROOVE LINE
03
:
ID-TYP-5301
CH.+3000
L1
L1
ARCHITECTS : สถาปนิก
L2
02
CL:01
0 00 R1
L2 L1
8500
CL:01 CH.+3450
L2
1
L2 L1
L2
L2
:
63
0 10 R1
L1
R9 00
CH.+2600
OWNERS : เจ้าของ
CH.+3300
R1
L1 L2
CL:01
L1
CL:02
L2
6
CH.+3300
CL:01
L2
CH.+2900
89
R1
L2
R
7 14
5
L1
E 1000
7 13 R1
L2
L1
Drawing title
F
AP-7-KEF2
AP-7-KEF1
AP-7-FF2
AP-7-FF4
AP-7-KMF3
REFLECTED CEILING PLAN LEVEL 07 FL. Date generated
27/03/20
CL:01 CH.+3450
NOT IN ID SCOPE
CL:01
CL:01
CL:01
CH.+3450
CH.+3450
CH.+3450
AP-7-PF2
NOT IN ID SCOPE
AP-7-KMF7
CL:01
CL:01
CH.+3450
CH.+3450
AP-7-KMF6
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2104
A
Status
01 -
REFLECTED CEILING PLAN (07 FL.) SCALE
1:100
REMARK :
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
6
8500
7
8
68000
8500
8500
9
8500
WP
10
8500
11
8500
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
H +300
NOT IN ID SCOPE
NOT IN ID SCOPE
WP
A 1000
J H+100
B
J J
J
J
J H+30
H+30
H+30
OWNERS : เจ้าของ
JO
:
BOH WASTE FOOD + WASHING MACHINE
J
ARCHITECTS : สถาปนิก
J
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
J
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
DN
:
59 sq.m.
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
J FHC.
INTERIOR DESIGNER :
RECYCLE BIN
J
มัณฑนากร
:
LANDSCAPE DESIGNER : FIRE COMPARTMENT AREA
ภูมิสถาปนิก
:
NOT IN ID SCOPE
Key Plan
JO JO
C J
H+100
WP
WP
J
J
DISABLED ACCESS / MANUAL OPERATED
ACCESS CONTROL POINT
WP J
J
JO
WP WP J
J E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ACCESS CONTROL POINT
OPEN
8500
27500
UP
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
J
:-
C
Consultant 2 Discipline
:-
WP WP
Consultant 1 Discipline
J
Other Party 2 Responsibility
J J
:-
J
WP
D
J
::-
FHC. DN
JO H+30
ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
UP
::-
NOT IN ID SCOPE
Other Party 1 Responsibility
::::-
8500
J
Client
NOT IN ID SCOPE
NOT IN ID SCOPE
J
::::Project
DN
THE LORD RAMA 9 J
J 1000
E
H+30
J
H+30
J
H+30
J
H+30
H+30 Drawing title
J
F
POWER OUTLET PLAN LEVEL 07 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2105
A
Status
01 -
POWER OUTLET PLAN (07 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
8500
6
7
8
68000
8500
8500
9
8500
8500
FL-02 FFL+000
10 8500
11
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
-
NOT IN ID SCOPE
NOT IN ID SCOPE
A 1000
FL-02 FFL+000
-
B
FL-02 FFL+000
OWNERS : เจ้าของ :
-
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
:
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
NOT IN ID SCOPE
Key Plan
FL-01 FFL+000 SK-01
C
FL-01 FFL+000 SK-01 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
NOT IN ID SCOPE
FL-01
FL-03
FL-01
8500
27500
UP
FFL+000 SK-01
FFL+000 SK-01
FFL+000 SK-01
START POINT
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
:Consultant 2 Discipline
:-
FL-01
Consultant 1 Discipline
FFL+000 SK-01
:Other Party 2 Responsibility
D
::::-
NOT IN ID SCOPE
Other Party 1 Responsibility
::::-
8500
Client
NOT IN ID SCOPE
NOT IN ID SCOPE
::::Project
THE LORD RAMA 9 START POINT
FL-01 FFL+000 SK-01 1000
E Drawing title
F
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER
FLOOR FINISHES PLAN LEVEL 07 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2106
A
Status
01 -
FLOOR FINISHES PLAN (07 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright
3
4
5
8500
8500
6
7
8
68000
8500
8500
9
8500
8500
10 8500
NOT IN ID SCOPE
11
© THE BEAUMONT PARTNERSHIP 2009
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
1000
A B
OWNERS : เจ้าของ :
BOH WASTE FOOD + WASHING MACHINE
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
DN
:
59 sq.m.
8500
NOT IN ID SCOPE
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
RECYCLE BIN
มัณฑนากร
:
FHC.
LANDSCAPE DESIGNER : FIRE COMPARTMENT AREA
ภูมิสถาปนิก
:
NOT IN ID SCOPE
Key Plan
DISABLED ACCESS / MANUAL OPERATED
ACCESS CONTROL POINT
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
ACCESS CONTROL POINT
OPEN
8500
27500
UP
NOT IN ID SCOPE
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::-
FHC. DN ACCESS CONTROL POINT
DISABLED ACCESS / MANUAL OPERATED
UP
::-
NOT IN ID SCOPE
Other Party 1 Responsibility
::::-
8500
Client
NOT IN ID SCOPE
NOT IN ID SCOPE
::::Project
DN
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 07 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
NOT IN ID SCOPE
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L07-2107
A
Status
01 -
WALL FINISHES PLAN (07 FL.) SCALE
FOR CONSTUCTION 1:100
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
34000 8500
8500
FFICE)
MALE
FEMALE
8500
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
159 sq.m.
294 sq.m.
FEMALE
MALE
8500
NOT IN ID SCOPE
1200
1500
MEP Unit MEP Unit
C
1450
MALE FHC.
MEP RECYCLEUnit
750
MEP Center
OWNERS : เจ้าของ
BIN
:
900
ARCHITECTS : สถาปนิก
FEMALE
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
UP
8500
FHC.
:
NOT IN ID SCOPE
LIFT HALL
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
UP
วิศวกรงานระบบ
:
FEMALE
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
DN
INTERIOR DESIGNER :
มัณฑนากร
:
NOT IN ID SCOPE
LANDSCAPE DESIGNER :
MEP Center
MALE
Key Plan
MEP Unit
D
ภูมิสถาปนิก
:
MEP Unit FIRE COMPARTMENT AREA (NO ACCESS)
MALE FEMALE
01 -
NOT IN ID SCOPE 5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
158 sq.m.
291 sq.m.
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
159 sq.m.
294 sq.m.
SETOUT PLAN (08 FL.) SCALE
OFFICE)
1:100
FFICE)
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:MALE
FEMALE
FEMALE
MALE
Consultant 2 Discipline
NOT IN ID SCOPE
:-
MEP Unit
Consultant 1 Discipline
:MEP Unit
C
PL-03
Other Party 2 Responsibility
SK-01
DR-03
PL-03
DR-06
DR-06
DR-08
MEP Center
FHC.
DR-07
MALE
SK-01
MEP RECYCLEUnit
DR-07
PL-03
FEMALE
SK-01
UP
DR-03
FHC.
::Other Party 1 Responsibility
BIN
DR-AR
::-
::::-
8500
Client
NOT IN ID SCOPE
LIFT HALL UP
DR-08
DR-03
DR-07
::-
DR-07
PL-03
FEMALE
DR-AR
SK-01
::Project
DN
NOT IN ID SCOPE
DR-06
MEP Center
MEP Unit
D
THE LORD RAMA 9 MALE
PL-03 SK-01
MEP Unit FIRE COMPARTMENT AREA (NO ACCESS)
Drawing title
DR-06
SETOUT PLAN PARTITION PLAN LEVEL 08 FL.
MALE
PL-03 FEMALE
Date generated
SK-01
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
OFFICE)
PL-03
5
6
SK-01
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
158 sq.m.
291 sq.m.
PL-03
02 -
PARTITION PLAN (08 FL.) SCALE
1:100
SK-01
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L08-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10 Copyright
34000 8500
© THE BEAUMONT PARTNERSHIP 2009
8500
CL:02
CL:02
CH.+2600
CH.+2600
8500
8500
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE CL:02 CH.+2600
JOINERY FULL HEIGHT
LP8-2
LP8-1 C
CL:01 CH.+2600
80
OWNERS : เจ้าของ
LP8-3
80
:
ARCHITECTS : สถาปนิก :
ALIGN
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
8500
CL:01
04
CH.+2600
05
CL:01 CH.+2600
ID-TYP-5301
ID-TYP-5301
:
NOT IN ID SCOPE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
200
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
LP8-6
มัณฑนากร
:
LANDSCAPE DESIGNER :
NOT IN ID SCOPE
ภูมิสถาปนิก
:
LP8-4
Key Plan
D CL:01
LP8-5
CL:02
CL:02
CH.+2750
CH.+2600
CH.+2600
CL:02
NOT IN ID SCOPE
CH.+2600
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN SCALE
1:100
FFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
159 sq.m.
294 sq.m.
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE MALE
FEMALE
MALE
:-
FEMALE
Consultant 1 Discipline
MEP Unit
:Other Party 2 Responsibility
MEP Unit
C
::MALE FHC.
MEP Center
FL-03 FFL+000 SK-01
FL-02 FFL+000
MEP RECYCLEUnit
FL-03
::-
-
::-
BIN
FFL+000 SK-01
::-
FEMALE
START POINT
8500
FHC.
LIFT HALL
Client
UP
::-
NOT IN ID SCOPE
FL-03 FFL+000 SK-01
Other Party 1 Responsibility
::-
UP
Project
FEMALE
FL-02 FFL+000
THE LORD RAMA 9
-
DN
NOT IN ID SCOPE
D NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. OFFICE) 02 -
FLOOR FINISHES PLAN (06 FL.) SCALE
1:100
MEP Center
MEP Unit
MALE
MEP Unit
Drawing title
FIRE COMPARTMENT AREA (NO ACCESS)
MALE
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 06 FL.
NOT IN ID SCOPE
Date generated
27/03/20 FEMALE
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
5 AREA FOR RENT (OFFICE) FL-02 FFL+000
-
FL-02 FFL+000
6 AREA FOR RENT (OFFICE)
Project number
7948
35 mm. on original Drawing number
Revision
ID-L08-2102
A
Status
FOR CONSTUCTION -
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
J
3
J
MECHANICAL ENGINEERS :
J
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
187 sq.m.
159 sq.m.
294 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
MALE
FEMALE
MALE
Key Plan
FEMALE
MEP Unit
H+100
H+100
H+100
J
MEP Unit
C
J
H+100
H+100
MALE FHC.
MEP Center
MEP RECYCLEUnit BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
FHC.
J
NOT IN ID SCOPE
LIFT HALL
J
:-
UP
Consultant 3 Discipline
FEMALE
:-
DN
MEP Center
MEP Unit
H+100
Consultant 2 Discipline
:-
NOT IN ID SCOPE
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:J
FIRE COMPARTMENT AREA (NO ACCESS)
Consultant 1 Discipline
MALE
MEP Unit
J
H+100
Other Party 2 Responsibility
::::-
H+100
Other Party 1 Responsibility
MALE
::-
8500
FEMALE
Client
4
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
200 sq.m.
J
::-
J
158 sq.m.
J
J
291 sq.m. J
J
::-
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 08 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L08-2103
A
Status
01 -
POWER OUTLET PLAN (08 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
2
3
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
187 sq.m.
159 sq.m.
294 sq.m.
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
MALE
FEMALE
MALE
Key Plan
FEMALE
MEP Unit MEP Unit
C
MALE
MEP Center
FHC.
MEP RECYCLEUnit BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
FHC.
NOT IN ID SCOPE
LIFT HALL
:-
UP
Consultant 3 Discipline
FEMALE
:-
DN
Consultant 2 Discipline
:-
NOT IN ID SCOPE
MEP Center
MEP Unit
D
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 1 Discipline
MALE
:MEP Unit
Other Party 2 Responsibility
::-
FIRE COMPARTMENT AREA (NO ACCESS)
::Other Party 1 Responsibility
MALE
::-
8500
FEMALE
::-
4
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
200 sq.m.
158 sq.m.
291 sq.m.
Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 08 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L08-2104
A
Status
01 -
WALL FINISHES PLAN (08 FL.) SCALE
FOR CONSTUCTION 1:100
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10 Copyright
34000 8500
© THE BEAUMONT PARTNERSHIP 2009
8500
E)
8500
8500
NOTES
AREA FOR RENT (OFFICE) 159 sq.m.
AREA FOR RENT (OFFICE) 295 sq.m.
FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
1200
1500
MEP Unit
MEP Central
MEP Unit
1575
MEP Unit
C
700
FHC.
MALE
OWNERS : เจ้าของ
RECYCLE BIN
:
ARCHITECTS : สถาปนิก
900
FEMALE
8500
NOT IN ID SCOPE
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
UP
DN FHC.
:
NOT IN ID SCOPE
LIFT HALL
UP
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
DN
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
FEMALE
:
INTERIOR DESIGNER :
MEP Unit
MEP Central
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
MALE
Key Plan
MEP Unit
D
FEMALE
MALE
MALE
FEMALE
MEP Unit
NOT IN ID SCOPE 6
01 -
5
SETOUT PLAN (09-16 FL.) SCALE
1:100
E)
AREA FOR RENT (OFFICE) 301 sq.m.
AREA FOR RENT (OFFICE) 163 sq.m.
E)
AREA FOR RENT (OFFICE) 159 sq.m.
AREA FOR RENT (OFFICE) 295 sq.m.
DR-02B
DR-02B
FEMALE
MALE
DR-02B
DR-02B
MALE
FEMALE
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:-
NOT IN ID SCOPE MEP Unit
Consultant 2 Discipline
DR-06
:Consultant 1 Discipline
:MEP Unit
C
::-
DR-03
MEP Central
DR-06
DR-07
DR-07
PL-03
DR-02B
::Other Party 1 Responsibility
DR-02B
FEMALE
::::-
UP
DR-03
DN DR-AR
MALE
RECYCLE BIN
DR-AR
DR-07
NOT IN ID SCOPE
MEP Unit
FHC.
SK-XX
8500
Other Party 2 Responsibility
DR-06
Client
FHC.
NOT IN ID SCOPE
LIFT HALL
UP
DR-03
DR-07
DR-07
::::-
DN
DR-07
FEMALE
Project
DR-02B
MEP Central
DR-06
MEP Unit
D
MEP Unit
THE LORD RAMA 9 MALE
DR-02B
DR-03 DR-06
Drawing title
FEMALE
MALE
DR-02B
DR-02B
MALE
FEMALE
DR-02B
DR-02B
MEP Unit
SETOUT PLAN PARTITION PLAN LEVEL 09-16 FL.
DR-06
NOT IN ID SCOPE
Date generated
27/03/20
6 5 E)
AREA FOR RENT (OFFICE) 163 sq.m.
AREA FOR RENT (OFFICE)
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
35 mm. on original
301 sq.m. Project number
7948
Drawing number
Revision
ID-L09-2101
A
Status
02 -
PARTITION PLAN (09-16 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10 Copyright
34000 8500
© THE BEAUMONT PARTNERSHIP 2009
8500
CL:02
CL:02
CH.+2600
CH.+2600
8500
8500
NOTES
NOT IN ID SCOPE
CL:02 CH.+2600
JOINERY FULL HEIGHT
LPX-2
LPX-1
C
80
OWNERS : เจ้าของ
LPX-3
80
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
:
ARCHITECTS : สถาปนิก
8500
NOT IN ID SCOPE
ALIGN
ALIGN
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
CL:01
CL:01
CH.+2600
CH.+2600
05
CL:01
04
CH.+2600
ID-TYP-5301
ID-TYP-5301
:
NOT IN ID SCOPE
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
200
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
10LCP,15LCP ELP10,ELP15 10,15 FL. ONLY
:
INTERIOR DESIGNER :
LPX-6
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
LPX-4
D
LPX-5
CL:01 CH.+2750
CL:02 CH.+2600
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (09-16 FL.) SCALE
1:100
CL:02
CL:02
CH.+2600
CH.+2600
E)
3
AREA FOR RENT (OFFICE) 159 sq.m.
AREA FOR RENT (OFFICE) 295 sq.m.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:FEMALE
MALE
MALE
Consultant 2 Discipline
NOT IN ID SCOPE
FEMALE
:Consultant 1 Discipline
MEP Unit
:Other Party 2 Responsibility
MEP Unit
C
::MEP Central
MEP Unit
FHC.
::-
MALE
Other Party 1 Responsibility
::-
RECYCLE BIN
::-
FEMALE
START POINT
8500
DN
NOT IN ID SCOPE
FHC.
Client
UP
::-
NOT IN ID SCOPE
LIFT HALL
UP
::-
DN
Project
FEMALE
MEP Central
D NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. E) -
FLOOR FINISHES PLAN (09-16 FL.) SCALE
1:100
MALE
MEP Unit
FEMALE
MALE
Drawing title
MALE
FEMALE
MEP Unit
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 09-16 FL.
NOT IN ID SCOPE
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
6 5 AREA FOR RENT (OFFICE) 163 sq.m.
02
MEP Unit
THE LORD RAMA 9
AREA FOR RENT (OFFICE) 301 sq.m.
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L09-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
210 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
J
J
3
J
J
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
AREA FOR RENT (OFFICE)
INTERIOR DESIGNER :
295 sq.m.
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
MEP Unit
H+100
H+100
H+100
J
MEP Unit
C
J
MEP Central
H+100
H+100
MEP Unit
FHC.
MALE
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN
J
NOT IN ID SCOPE
J
FHC.
NOT IN ID SCOPE
LIFT HALL
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Unit
MEP Central D
MEP Unit
H+100
:Consultant 1 Discipline
MALE
:H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100 FEMALE
MALE
MALE
FEMALE
MEP Unit
Other Party 1 Responsibility
::::-
8500
6 4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
210 sq.m.
J
J
163 sq.m.
J
Client
AREA FOR RENT (OFFICE)
::-
301 sq.m.
J
J
J
J
::Project
THE LORD RAMA 9
1000
E F
Drawing title
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 09-16 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L09-2103
A
Status
01 -
POWER OUTLET PLAN (09-16 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
1
2
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
210 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
3 AREA FOR RENT (OFFICE) 295 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
MEP Unit MEP Unit
C
MEP Central
MEP Unit
FHC.
MALE
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN
NOT IN ID SCOPE
FHC.
NOT IN ID SCOPE
LIFT HALL
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Central
MEP Unit
:Consultant 1 Discipline
MALE
:-
MEP Unit
D
Other Party 2 Responsibility
::::-
FEMALE
MALE
MALE
FEMALE
MEP Unit
Other Party 1 Responsibility
::-
8500
6 4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
210 sq.m.
163 sq.m.
AREA FOR RENT (OFFICE) 301 sq.m.
::Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 09-16 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L09-2104
A
Status
01 -
WALL FINISHES PLAN (09-16 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
10
34000 8500
8500
E)
8500
8500
3
AREA FOR RENT (OFFICE) 159 sq.m.
AREA FOR RENT (OFFICE) 295 sq.m.
FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
MEP Center MEP
C
Unit
700
Center
RECYCLE BIN
:
ARCHITECTS : สถาปนิก
MEP
FHC.
:
Unit
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
900
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
FEMALE
8500
NOT IN ID SCOPE
:
UP
DN
MECHANICAL ENGINEERS :
NOT IN ID SCOPE
LIFT HALL
FHC.
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ
MALE
MEP
NOTES
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
UP
INTERIOR DESIGNER :
DN
มัณฑนากร
:
FEMALE
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
MEP MEP
Unit
Center
MALE
MEP
D
Unit
FEMALE
MALE
MALE
FEMALE
MEP
NOT IN ID SCOPE
Center
6 01 -
5
SETOUT PLAN (17 FL.) SCALE
AREA FOR RENT (OFFICE) 301 sq.m.
E)
1:100
AREA FOR RENT (OFFICE) 162 sq.m.
E)
3
:-
AREA FOR RENT (OFFICE)
:-
AREA FOR RENT (OFFICE) 159 sq.m.
295 sq.m. DR-02B
DR-02B
FEMALE
MALE
DR-02B
DR-02B
MALE
FEMALE
Other Party 2 Responsibility
::-
PL-03
::-
DR-06
DR-03
Other Party 1 Responsibility
MALE
DR-06
MEP
DR-07
DR-07
DR-02B
DR-AR
DN DR-AR
UP
::-
NOT IN ID SCOPE
LIFT HALL
FHC.
Project
DN
DR-03 DR-07
DR-07
Client
::-
FEMALE UP
DR-03
::::-
Unit
RECYCLE BIN
DR-07
DR-02B
MEP
FHC.
Center
8500
Consultant 2 Discipline
:-
DR-06
MEP
NOT IN ID SCOPE
Consultant 3 Discipline
Consultant 1 Discipline
NOT IN ID SCOPE Center
Unit
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:MEP
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
THE LORD RAMA 9
DR-07
FEMALE DR-02B
MEP MEP
DR-06
Unit
Center
DR-02B
DR-03
MEP
D
MALE
Drawing title
DR-06
SETOUT PLAN PARTITION PLAN LEVEL 17 FL.
Unit
Date generated
FEMALE
MALE
MALE
FEMALE
MEP
27/03/20
DR-06
NOT IN ID SCOPE
Center DR-02B
DR-02B
DR-02B
PARTITION PLAN (17 FL.) SCALE
1:100
AREA FOR RENT (OFFICE) 301 sq.m.
E)
Approved
-
MF.
1:100 @ A2 sheet size
DR-02B
5 -
Checked
-
Scale
6 02
Drawn
AREA FOR RENT (OFFICE) 162 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L17-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
NOTES
10
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
34000 8500
8500
CL:02
CL:02
CH.+2600
CH.+2600
8500
8500
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
LP17-2 C
LP17-1
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
80
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
LP17-3
80
:
8500
:
ALIGN
ALIGN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า MECHANICAL ENGINEERS :
CL:01
NOT IN ID SCOPE
CL:01
CH.+2600
04
CH.+2600
05
CL:01
NOT IN ID SCOPE
CH.+2600
ID-TYP-5301
ID-TYP-5301
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
200
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
LP17-6
Key Plan
LP17-4
D
LP17-5
CL:01 CH.+2750
CL:02 CH.+2600 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (17 FL.) SCALE
1:100
E)
FL-02 FFL+000
CL:02
CL:02
CH.+2600
CH.+2600
FL-02
-
FFL+000
3
:-
AREA FOR RENT (OFFICE)
:-
AREA FOR RENT (OFFICE)
Consultant 3 Discipline
159 sq.m.
-
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
295 sq.m.
Consultant 2 Discipline
:FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
Consultant 1 Discipline
:-
MEP
Other Party 2 Responsibility
Center
::-
MEP
C
::-
Unit
Other Party 1 Responsibility
MALE
MEP Center
FL-02
MEP
FHC.
FFL+000
-
::-
Unit
RECYCLE BIN
Client
::-
FEMALE START POINT
8500
DN NOT IN ID SCOPE
LIFT HALL
FHC.
UP
::-
NOT IN ID SCOPE
FL-03 FFL+000 SK-01
UP
::-
Project
DN
FL-02
FEMALE
FFL+000
THE LORD RAMA 9 -
MEP MEP
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 -
FLOOR FINISHES PLAN (17 FL.) SCALE
1:100
E)
Center
Unit
MALE Drawing title
MEP
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 17 FL.
Unit
Date generated
FEMALE
MALE
MALE
FEMALE
MEP
27/03/20
NOT IN ID SCOPE
Center
5 -
FL-02 FFL+000
AREA FOR RENT (OFFICE) 301 sq.m.
-
Approved
-
MF.
1:100
6 FL-02
Checked
-
Scale @ A2 sheet size
FFL+000
Drawn
AREA FOR RENT (OFFICE) 162 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L17-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
J
J
J
J
วิศวกรงานระบบ
:
3
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
AREA FOR RENT (OFFICE)
INTERIOR DESIGNER :
295 sq.m.
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
MEP
H+100
H+100
Center J
H+100
J
H+100
MEP
C
H+100
Unit MALE
MEP
MEP
FHC.
Center
Unit
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN
J
NOT IN ID SCOPE
J
NOT IN ID SCOPE
LIFT HALL
FHC.
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP MEP
Unit
Center
:Consultant 1 Discipline
MALE
:-
MEP D
H+100
Unit
H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100 FEMALE
MALE
MALE
FEMALE
Other Party 1 Responsibility
MEP
::-
Center
::-
8500
6 4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
Client
AREA FOR RENT (OFFICE)
::-
301 sq.m. 178 sq.m.
J
J
162 sq.m.
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 17 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L17-2103
A
Status
01 -
POWER OUTLET PLAN (17 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
1
2
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
3 AREA FOR RENT (OFFICE) 295 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
MEP Center MEP
C
Unit MALE
MEP Center
MEP
FHC.
Unit
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN NOT IN ID SCOPE
NOT IN ID SCOPE
LIFT HALL
FHC.
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP MEP Center
Unit
:Consultant 1 Discipline
MALE
:-
MEP D
Other Party 2 Responsibility
Unit
::::-
FEMALE
MALE
MALE
FEMALE
Other Party 1 Responsibility
MEP
::-
Center
8500
6 4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
162 sq.m.
::Client
AREA FOR RENT (OFFICE) 301 sq.m.
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 17 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L17-2104
A
Status
01 -
WALL FINISHES PLAN (17 FL.) SCALE
FOR CONSTUCTION 1:100
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
10
34000 8500
8500
E)
8500
8500
3
AREA FOR RENT (OFFICE) 159 sq.m.
AREA FOR RENT (OFFICE) 295 sq.m.
FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
MEP Center MEP
C
Unit
RECYCLE BIN
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
UP
DN 8500
:
FEMALE
900
NOT IN ID SCOPE
ARCHITECTS : สถาปนิก
Unit
700
Center
:
MEP
FHC.
MECHANICAL ENGINEERS :
NOT IN ID SCOPE
LIFT HALL
FHC.
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ
MALE
MEP
NOTES
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
UP
INTERIOR DESIGNER :
DN
มัณฑนากร
:
FEMALE
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
MEP MEP
Unit
Center
MALE
MEP
D
Unit
FEMALE
MALE
MALE
FEMALE
MEP
NOT IN ID SCOPE
Center
6 01 -
5
SETOUT PLAN (18-21 FL.) SCALE
AREA FOR RENT (OFFICE) 301 sq.m.
1:100
E)
AREA FOR RENT (OFFICE) 162 sq.m.
E)
3
:-
AREA FOR RENT (OFFICE)
:-
AREA FOR RENT (OFFICE) 159 sq.m.
295 sq.m. DR-02B
DR-02B
FEMALE
MALE
DR-02B
DR-02B
MALE
FEMALE
Other Party 2 Responsibility
::PL-03
::-
DR-06
-
DR-03
Other Party 1 Responsibility
MALE
DR-06
MEP
DR-07
DR-07
Center
DN DR-AR
DR-02B
UP
::-
NOT IN ID SCOPE DR-03
DR-07
DR-07
DR-07
Client
::-
FEMALE UP
LIFT HALL
FHC.
::::-
Unit
RECYCLE BIN
DR-03
DR-02B
MEP
FHC.
DR-AR
DR-07 8500
Consultant 2 Discipline
:-
DR-06
MEP
NOT IN ID SCOPE
Consultant 3 Discipline
Consultant 1 Discipline
NOT IN ID SCOPE Center
Unit
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:MEP
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
Project
DN
THE LORD RAMA 9 FEMALE DR-02B
MEP MEP
DR-06
Unit
Center
DR-02B
DR-03
MEP
D
MALE
Drawing title
DR-06
SETOUT PLAN PARTITION PLAN LEVEL 18-21 FL.
Unit
Date generated
FEMALE
MALE
MALE
FEMALE
MEP
DR-06
27/03/20
NOT IN ID SCOPE
Center DR-02B
DR-02B
DR-02B
PARTITION PLAN (18-21 FL.) SCALE
1:100
AREA FOR RENT (OFFICE) 301 sq.m.
E)
Approved
-
MF.
1:100 @ A2 sheet size
DR-02B
5 -
Checked
-
Scale
6 02
Drawn
AREA FOR RENT (OFFICE) 162 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L18-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
NOTES
10
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
34000 8500
8500
CL:02
CL:02
CH.+2600
CH.+2600
8500
8500
NOT IN ID SCOPE CL:02 CH.+2600
LPX-2 C
JOINERY FULL HEIGHT
LPX-1
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
80
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
LPX-3
80
:
8500
:
ALIGN
ALIGN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า MECHANICAL ENGINEERS :
CL:01
NOT IN ID SCOPE
CL:01
CH.+2600
04
CH.+2600
05
CL:01
NOT IN ID SCOPE
CH.+2600
ID-TYP-5301
ID-TYP-5301
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
200
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
20LCP ELP20 ON 20 FL. ONLY
LPX-6
Key Plan
LPX-4
D
CL:01
LPX-5
CH.+2750
CL:02 CH.+2600 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (18-21 FL.) SCALE
1:100
E)
FL-02 FFL+000
CL:02
CL:02
CH.+2600
CH.+2600
FL-02
-
FFL+000
3
:-
AREA FOR RENT (OFFICE)
:-
AREA FOR RENT (OFFICE)
-
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
Consultant 3 Discipline
159 sq.m. 295 sq.m.
Consultant 2 Discipline
:FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
Consultant 1 Discipline
:-
MEP
Other Party 2 Responsibility
Center
::-
MEP
C
::-
Unit
Other Party 1 Responsibility
MALE
MEP Center
FL-02
MEP
FHC.
FFL+000
-
::-
Unit
RECYCLE BIN
Client
::-
FEMALE UP
8500
DN NOT IN ID SCOPE
LIFT HALL
FHC.
FFL+000 SK-01
UP
::-
NOT IN ID SCOPE
START POINT
FL-03
::-
Project
DN
FL-02
FEMALE
FFL+000
THE LORD RAMA 9 -
MEP MEP
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 -
FLOOR FINISHES PLAN (18-21 FL.) E) SCALE
1:100
Center
Unit
MALE Drawing title
MEP
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 18-21 FL.
Unit
Date generated
FEMALE
MALE
MALE
FEMALE
MEP
27/03/20
NOT IN ID SCOPE
Center
FFL+000
-
FFL+000
5 -
Approved
-
MF.
1:100
6 FL-02
Checked
-
Scale @ A2 sheet size
FL-02
Drawn
AREA FOR RENT (OFFICE) 301 sq.m.
AREA FOR RENT (OFFICE) 162 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L18-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
J
J
J
J
3
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
AREA FOR RENT (OFFICE)
INTERIOR DESIGNER :
295 sq.m.
H +900 WP
วิศวกรงานระบบ
:
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
H+100
WP
FEMALE
MEP
H +900 H +900 WP WP
H +900
Key Plan
H+100
Center J
H+100
J
H+100
MEP
C
H+100
Unit MALE
MEP
MEP
FHC.
Center
Unit
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN
J
NOT IN ID SCOPE
J
NOT IN ID SCOPE
LIFT HALL
FHC.
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP MEP
Unit
Center
:Consultant 1 Discipline
MALE
:-
MEP D
Unit
H+100
WP H+100 FEMALE
J
Other Party 2 Responsibility
::-
J
H +900 MALE
H +900 WP
8500
H+100
::-
WP WP MALE H +900 H FEMALE +900
Other Party 1 Responsibility
MEP
::-
Center
::-
6
4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
Client
AREA FOR RENT (OFFICE)
::-
301 sq.m. 178 sq.m.
J
J
162 sq.m.
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E F
Drawing title
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 18-21 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L18-2103
A
Status
01 -
POWER OUTLET PLAN (18-21 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
1
2
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
MECHANICAL ENGINEERS :
3 AREA FOR RENT (OFFICE) 295 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
MEP Center MEP
C
Unit MALE
MEP Center
MEP
FHC.
Unit
RECYCLE BIN
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP
8500
27500
DN NOT IN ID SCOPE
NOT IN ID SCOPE
LIFT HALL
FHC.
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP MEP Center
Unit
:Consultant 1 Discipline
MALE
:-
MEP D
Other Party 2 Responsibility
Unit
::::-
FEMALE
MALE
MALE
FEMALE
Other Party 1 Responsibility
MEP
::-
Center
8500
6 4
5
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
162 sq.m.
::Client
AREA FOR RENT (OFFICE) 301 sq.m.
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 18-21 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L18-2104
A
Status
01 -
WALL FINISHES PLAN (18-21 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
10
34000 8500
8500
8500
8500
NOT IN ID SCOPE
C
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
NOT IN ID SCOPE
ARCHITECTS : สถาปนิก :
700
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
900
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
MECHANICAL ENGINEERS :
NOT IN ID SCOPE
NOT IN ID SCOPE
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
NOT IN ID SCOPE
D
NOT IN ID SCOPE
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (22 FL.) SCALE
1:100
E)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
DR-02B
DR-02B
FEMALE
MALE
DR-02B
DR-02B
MALE
FEMALE
:Consultant 1 Discipline
NOT IN ID SCOPE AHU.
:-
DR-06
Other Party 2 Responsibility
::-
MEP Unit
C
PL-03 DR-03
Other Party 1 Responsibility
MEP Center
NOT IN ID SCOPE
DR-06
MALE DR-07
DR-07
FHC. RECYCLE BIN
DR-07
DN 8500
HALL
DR-03
NOT IN ID SCOPE
DR-02B
DR-07
UP
DR-07
Client
::::-
NOT IN ID SCOPE DR-03
::::-
FEMALE
LIFT LOBBY DR-07
DR-02B
MEP Unit
DR-AR DR-AR
UP
::-
DR-06
-
Project
DN
THE LORD RAMA 9 FEMALE DR-02B
MEP Unit
D
MEP Center
NOT IN ID SCOPE
DR-06
MEP Unit
MALE
DR-02B
DR-03
Drawing title
DR-06
SETOUT PLAN PARTITION PLAN LEVEL 22 FL. Date generated
FEMALE
MALE
MALE
FEMALE
AHU.
27/03/20
DR-06
NOT IN ID SCOPE
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 DR-02B
DR-02B
DR-02B
@ A2 sheet size
DR-02B
Project number
02 -
PARTITION PLAN (22 FL.) SCALE
1:100
E)
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
162 sq.m.
301 sq.m.
7948
35 mm. on original Drawing number
Revision
ID-L22-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
6
7
8
9
NOTES
10
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
34000 8500
8500
CL:02
CL:02
CH.+2600
CH.+2600
8500
8500
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
C
OWNERS : เจ้าของ :
NOT IN ID SCOPE
ARCHITECTS : สถาปนิก :
80
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
80
:
8500
NOT IN ID SCOPE
04
:
ALIGN
ALIGN
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า MECHANICAL ENGINEERS :
CL:01
CL:01
CH.+2600
CH.+2600
05
ID-TYP-5301
NOT IN ID SCOPE
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
ID-TYP-5301
:
200
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
NOT IN ID SCOPE
D CL:01 CH.+2750
CL:02 CH.+2600 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (22 FL.) SCALE
1:100
E)
FL-02 FFL+000
CL:02
CL:02
CH.+2600
CH.+2600
FL-02
-
FFL+000
-
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
159 sq.m.
295 sq.m.
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:FEMALE
MALE
MALE
NOT IN ID SCOPE
FEMALE
Consultant 1 Discipline
:-
AHU.
Other Party 2 Responsibility
::-
MEP Unit
C
::Other Party 1 Responsibility
MALE
MEP Center
NOT IN ID SCOPE
FHC. RECYCLE BIN
HALL
8500
DN NOT IN ID SCOPE
LIFT LOBBY
Client
::::-
NOT IN ID SCOPE
Project
DN
FL-02
FEMALE
MEP Center
NOT IN ID SCOPE
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 -
FLOOR FINISHES PLAN (22 FL.) SCALE
1:100
E)
::::-
UP
FFL+000 SK-01
UP
-
FEMALE
START POINT
FL-03
FL-02 FFL+000
MEP Unit
MEP Unit
FFL+000
THE LORD RAMA 9 -
MALE Drawing title
MEP Unit
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 22 FL. Date generated
FEMALE
MALE
MALE
FEMALE
AHU.
27/03/20
NOT IN ID SCOPE
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
FL-02 FFL+000
-
FL-02 FFL+000
-
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
162 sq.m.
301 sq.m.
7948
35 mm. on original Drawing number
Revision
ID-L22-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
J
3
J
MECHANICAL ENGINEERS :
J
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
295 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
AHU. H+100
H+100
H+100
J
MEP Unit
C
J
FHC.
MEP Unit
RECYCLE BIN
8500
27500
NOT IN ID SCOPE
J
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE
HALL
DN
J
H+100
MALE
MEP Center
NOT IN ID SCOPE
H+100
UP NOT IN ID SCOPE
LIFT LOBBY UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Unit
D H+100
MEP Unit
MEP Center
NOT IN ID SCOPE
:Consultant 1 Discipline
MALE
:H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100 FEMALE
MALE
MALE
FEMALE
AHU.
Other Party 1 Responsibility
::-
8500
::-
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
J
Client
4 J
162 sq.m.
J
J
301 sq.m. J
J
::-
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 22 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L22-2103
A
Status
01 -
POWER OUTLET PLAN (22 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
2
3
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
295 sq.m.
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
AHU.
MEP Unit
C
MALE
MEP Center
NOT IN ID SCOPE
FHC. RECYCLE BIN
HALL
8500
27500
DN NOT IN ID SCOPE
MEP Unit E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE UP NOT IN ID SCOPE
LIFT LOBBY UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Center
NOT IN ID SCOPE
MEP Unit
:Consultant 1 Discipline
MALE
:-
MEP Unit
D
Other Party 2 Responsibility
::::-
FEMALE
MALE
MALE
FEMALE
AHU.
Other Party 1 Responsibility
::-
8500
::-
4
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
162 sq.m.
301 sq.m.
Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 22 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L22-2104
A
Status
01 -
WALL FINISHES PLAN (22 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
8500
NOTES
8500
8500
8500
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
295 sq.m.
347 sq.m.
NOT IN ID SCOPE
1200
FEMALE 1500
MEP Unit
C
MEP Center
MALE
MEP Unit
FHC.
700
MALE
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000
RECYCLE BIN
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
900
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
UP
DN
NOT IN ID SCOPE
FEMALE
MEP Center
FHC.
1000
LIFT MACHINE ROOM
NOT IN ID SCOPE
LIFT LOBBY
NOT IN ID SCOPE
UP
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
DN
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
FEMALE
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
3400
MALE
1500
6000
+ D
MEP Unit
MEP Center
MALE
MEP Unit
FEMALE
CORRIDOR 1200
MACHINE ROOM
2400
CORRIDOR
1000
NOT IN ID SCOPE
01 -
SETOUT PLAN (23 FL.) SCALE
4 AREA FOR RENT (OFFICE)
3
1:100
301 sq.m.
AREA FOR RENT (OFFICE)
3600
281 sq.m.
9050
4900
1900
3851
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
295 sq.m.
347 sq.m.
Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:-
DR-02B
Other Party 2 Responsibility
FEMALE
::-
MEP Unit
C
PL-03
MEP Center
DR-02B MALE
DR-06
Other Party 1 Responsibility
MALE DR-07
DR-07
FHC. RECYCLE BIN
DR-03
DN
NOT IN ID SCOPE
MEP Unit
MEP Center
FHC.
LIFT MACHINE ROOM
UP
DR-AR
Client
::-
FEMALE
::-
NOT IN ID SCOPE
NOT IN ID SCOPE
::::-
UP
LIFT LOBBY
DR-AR
DR-02B
DR-02B
DR-AR
DR-AR
8500
::-
DR-06
-
Project
DN
DR-03
THE LORD RAMA 9
DR-07
FEMALE DR-02B
DR-06
DR-02B
MEP Unit
MEP Center
MALE
+
MALE
DR-02B Drawing title
DR-06
D
MEP Unit PL-04
FEMALE
CORRIDOR DR-07
MACHINE ROOM
SK-01
SETOUT PLAN PARTITION PLAN LEVEL 23 FL. Date generated
27/03/20
DR-02B
CORRIDOR
02 -
PARTITION PLAN (23 FL.) SCALE
1:100
Checked
Approved
-
-
MF.
Scale
PL-04
PL-04
SK-01
SK-01
NOT IN ID SCOPE
1:100 @ A2 sheet size Project number
4
7948
35 mm. on original Drawing number
Revision
ID-L23-2101
A
Status
PL-04 SK-01
Drawn
AREA FOR RENT (OFFICE)
3
301 sq.m.
AREA FOR RENT (OFFICE)
PL-04
281 sq.m.
SK-01
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
CL:02 CH.+2600
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
LP23-1 C
OWNERS : เจ้าของ
80
:
LP23-2
80
ARCHITECTS : สถาปนิก
8500
NOT IN ID SCOPE
:
CL:01
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
CH.+2600
05
04
:
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
200
NOT IN ID SCOPE
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
ALIGN
:
:
INTERIOR DESIGNER :
LP23-4
CL:01
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CH.+2750
+
มัณฑนากร
:
Key Plan
D
LP23-3
CL:01 CH.+2600
CL:02 CH.+2600
CL:01 CH.+2600
CL:02 CH.+2600
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
NOT IN ID SCOPE 01 -
REFLECTED CEILING PLAN (23 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE) FL-02 FFL+000
Consultant 3 Discipline
295 sq.m.
347 sq.m.
:Consultant 2 Discipline
-
:-
NOT IN ID SCOPE
Consultant 1 Discipline
:Other Party 2 Responsibility
FEMALE
::-
MEP Unit
C
::Other Party 1 Responsibility
MEP Center
MALE
MALE FHC. RECYCLE BIN
MEP Unit
FL-02 FFL+000
-
::Client
::-
FEMALE UP
8500
DN
NOT IN ID SCOPE
MEP Center
FHC.
LIFT MACHINE ROOM
LIFT LOBBY
START POINT
FL-03
UP
::-
NOT IN ID SCOPE
FFL+000 SK-01
NOT IN ID SCOPE
Project
DN
FEMALE
MEP Center
MALE
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 -
FLOOR FINISHES PLAN (23 FL.) SCALE
1:100
::-
+
FL-02 FFL+000
THE LORD RAMA 9 -
MEP Unit MALE Drawing title
MEP Unit
FEMALE
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 23 FL.
CORRIDOR MACHINE ROOM
Date generated
27/03/20 CORRIDOR
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
4
NOT IN ID SCOPE FL-02 FFL+000
-
3 AREA FOR RENT (OFFICE) 281 sq.m.
7948
35 mm. on original Drawing number
Revision
ID-L23-2102
A
Status
AREA FOR RENT (OFFICE) 301 sq.m.
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
1
8500
J
J
2
J
J
3
J
MECHANICAL ENGINEERS :
J
J
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
159 sq.m.
295 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
FEMALE
MALE
MALE
FEMALE
Key Plan
AHU. H+100
H+100
H+100
J
MEP Unit
C
J
FHC.
MEP Unit
RECYCLE BIN
8500
27500
NOT IN ID SCOPE
J
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE
HALL
DN
J
H+100
MALE
MEP Center
NOT IN ID SCOPE
H+100
UP NOT IN ID SCOPE
LIFT LOBBY UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Unit
D H+100
MEP Unit
MEP Center
NOT IN ID SCOPE
:Consultant 1 Discipline
MALE
:H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100 FEMALE
MALE
MALE
FEMALE
AHU.
Other Party 1 Responsibility
::-
8500
::-
5
6
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
178 sq.m.
J
Client
4 J
162 sq.m.
J
J
301 sq.m. J
J
::-
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 22 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L23-2103
A
Status
01 -
POWER OUTLET PLAN (22 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
:
MECHANICAL ENGINEERS :
1
2
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE) 295 sq.m.
347 sq.m.
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
FEMALE
MEP Unit
C
MEP Center
MALE
MALE FHC. RECYCLE BIN
MEP Unit FEMALE
UP
8500
27500
DN
NOT IN ID SCOPE
MEP Center
FHC.
LIFT MACHINE ROOM
NOT IN ID SCOPE
LIFT LOBBY
NOT IN ID SCOPE
UP
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Center
MALE
+
MEP Unit
:Consultant 1 Discipline
MALE
:Other Party 2 Responsibility
D
MEP Unit
FEMALE
::-
CORRIDOR
::-
MACHINE ROOM
Other Party 1 Responsibility
CORRIDOR
::::-
8500
4 3 AREA FOR RENT (OFFICE) 281 sq.m.
AREA FOR RENT (OFFICE) 301 sq.m.
Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 23 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L23-2104
A
Status
01 -
WALL FINISHES PLAN (23 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
1500
1200
C
OWNERS : เจ้าของ
700
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
8500
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
NOT IN ID SCOPE
:
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1500
4500
3400
Key Plan
D
1200
NOT IN ID SCOPE 12000
01 -
2000
5000 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (24 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
365 sq.m.
295 sq.m.
:Consultant 2 Discipline
:Consultant 1 Discipline
NOT IN ID SCOPE
:Other Party 2 Responsibility
::-
C
PL-03 DR-02B
DR-06
MEP Unit
MALE
DR-02B
MEP Center
FEMALE
MALE
::-
DR-06
-
DR-07
DR-07
Other Party 1 Responsibility
DR-02B
MEP Unit
FHC. RECYCLE BIN
::-
DR-02B
DR-03
8500
DN
NOT IN ID SCOPE UP
Project
DN
DR-03
DR-AR
::-
NOT IN ID SCOPE
LIFT LOBBY
FHC.
FEMALE
UP
Client
::-
DR-AR DR-AR
::-
THE LORD RAMA 9
DR-07
FEMALE DR-02B
DR-06
PL-04
MEP Unit
FEMALE
MALE
DR-02B
SK-01
MEP Center
DR-02B
MEP Unit
DR-02B
MALE
Drawing title
DR-06
D
SETOUT PLAN PARTITION PLAN LEVEL 24 FL.
CORRIDOR DR-07
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100
PL-04
3 02 -
PARTITION PLAN (24 FL.) SCALE
1:100
SK-01
@ A2 sheet size
NOT IN ID SCOPE
4
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L24-2101
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
NOTES
8500
8500
8500
AREA FOR RENT (OFFICE)
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
AREA FOR RENT (OFFICE)
365 sq.m.
295 sq.m.
NOT IN ID SCOPE
CL:02 CH.+2600 JOINERY FULL HEIGHT
C
LP24-1 MALE
MEP Unit
CL:02
MEP Center
CL:02
FEMALE CH.+2600
MALE CH.+2600
80
MEP Unit
FHC. RECYCLE BIN
80
OWNERS : เจ้าของ :
LP24-2
ARCHITECTS : สถาปนิก
8500
DN
NOT IN ID SCOPE
LIFT LOBBY 04
FHC.
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
FEMALE
ALIGN
ALIGN
:
CL:01
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
NOT IN ID SCOPE
CH.+2600
05
:
UP
:
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
UP
200
DN
CL:02 MALE
CL:02 FEMALE
CH.+2600
CH.+2600
:
ภูมิสถาปนิก
:
Key Plan
MALE
LP24-3
D
LANDSCAPE DESIGNER :
MEP Unit
MEP Center
CH.+2750
มัณฑนากร
:
LP24-4
CL:01
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
FEMALE
INTERIOR DESIGNER :
MEP Unit
วิศวกรงานระบบ
:
CL:01 CORRIDOR
CH.+2600
CL:02 CH.+2600
3
01 -
4
NOT IN ID SCOPE
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN (24 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
AREA FOR RENT (OFFICE)
:-
AREA FOR RENT (OFFICE)
365 sq.m.
295 sq.m.
Consultant 2 Discipline
:Consultant 1 Discipline
FL-02 FFL+000
NOT IN ID SCOPE
-
:Other Party 2 Responsibility
::-
C
::-
MALE
MEP Unit
MEP Center
FEMALE
MALE
Other Party 1 Responsibility
FL-02
MEP Unit
FHC. RECYCLE BIN
FFL+000
-
::Client
::-
FEMALE UP
8500
DN
NOT IN ID SCOPE
LIFT LOBBY
FHC.
START POINT
FL-03
UP
::-
NOT IN ID SCOPE
FFL+000 SK-01
Project
DN
FEMALE
FL-02 FFL+000
MEP Unit
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 -
FLOOR FINISHES PLAN (24 FL.) SCALE
1:100
::-
FEMALE
MALE
MEP Center
THE LORD RAMA 9 -
MEP Unit MALE
Drawing title
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 24 FL.
CORRIDOR
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
FL-02 FFL+000
3
1:100
-
@ A2 sheet size
NOT IN ID SCOPE
4
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
Project number
7948
35 mm. on original Drawing number
Revision
ID-L24-2102
A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
H+100
8500
H+100
NOTES
8500
H+100
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
8500
J
J
J
J
1
J
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
2
:
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
365 sq.m.
INTERIOR DESIGNER :
295 sq.m.
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
H+100
J
H+100
J
H+100
H+100
C MALE
MEP Unit
MEP Center
FEMALE
MALE
RECYCLE BIN
8500
27500
NOT IN ID SCOPE
LIFT LOBBY
FHC.
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
FEMALE
UP
DN
NOT IN ID SCOPE
MEP Unit
FHC.
UP
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
Consultant 3 Discipline
FEMALE
:Consultant 2 Discipline
MEP Unit
FEMALE
MALE
MEP Unit
MEP Center
:Consultant 1 Discipline
:-
MALE
H+100
D H+100
J
Other Party 2 Responsibility
::-
J
CORRIDOR
::-
H+100
Other Party 1 Responsibility
8500
::-
J
::-
3
4
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
J
J
J
J
Client
J
::-
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 24 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L24-2103
A
Status
01 -
POWER OUTLET PLAN (24 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
8500
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
1
2
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
365 sq.m.
295 sq.m.
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
C MALE
MEP Unit
MALE
MEP Center
FEMALE
8500
27500
RECYCLE BIN
FEMALE
UP
DN
NOT IN ID SCOPE
MEP Unit
FHC.
NOT IN ID SCOPE
LIFT LOBBY
FHC. UP
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
DN
FEMALE
Consultant 3 Discipline
:Consultant 2 Discipline
MEP Unit
MALE
FEMALE
MEP Center
MEP Unit
:Consultant 1 Discipline
:-
MALE
Other Party 2 Responsibility
D
::-
CORRIDOR
::Other Party 1 Responsibility
8500
::3
4
AREA FOR RENT (OFFICE)
AREA FOR RENT (OFFICE)
327 sq.m.
301 sq.m.
::Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 24 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L24-2104
A
Status
01 -
WALL FINISHES PLAN (24 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
1850
1500
1200
OWNERS : เจ้าของ
700
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1500
3400
Key Plan
1200
NOT IN ID SCOPE
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (25 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
DR-02B
DR-02B
DR-02B
DR-02B
:Consultant 1 Discipline
NOT IN ID SCOPE DR-06
:-
PL-03 -
Other Party 2 Responsibility
::-
C
::-
DR-03
Other Party 1 Responsibility
DR-06 DR-02B
DR-06 DR-07
DR-07
::::-
DR-AR
DR-02B
::-
DR-AR DR-03
::-
8500
DR-07
Client
Project
DR-07
DR-03
DR-07
THE LORD RAMA 9
DR-07
DR-02B
DR-AR
DR-06
DR-06 DR-03
DR-02B Drawing title
D
SETOUT PLAN PARTITION PLAN LEVEL 25 FL. Date generated
DR-06
27/03/20
NOT IN ID SCOPE
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 DR-02B
DR-02B
DR-02B
DR-02B
@ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L25-2101
A
Status
02 -
PARTITION PLAN (25 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
8500
CL:02
CL:02
CH.+2600
CH.+2600
NOTES
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE JOINERY FULL HEIGHT
CL:02 CH.+2600
LP25-1
C
LP25-2
OWNERS : เจ้าของ :
80
LP25-3
80
ARCHITECTS : สถาปนิก
ALIGN
ALIGN
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
CL:01
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
8500
CH.+2600
CL:01
:
05
04
CH.+2600
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
200
SANITARY ENGINEERS : :
CL:01
25LCP ELP25
INTERIOR DESIGNER :
มัณฑนากร
:
LP25-6
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CH.+2750
Key Plan
LP25-5
D
LP25-4 CL:02 CH.+2600
NOT IN ID SCOPE
01 -
CH.+2600
CH.+2600
CL:02
CL:02
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN (25 FL.) SCALE
1:100
FL-02 FFL+000
-
FL-02 FFL+000
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
-
Consultant 3 Discipline
:Consultant 2 Discipline
:-
NOT IN ID SCOPE
Consultant 1 Discipline
:Other Party 2 Responsibility
::-
C
::Other Party 1 Responsibility
FL-02 FFL+000
-
::::Client
::-
8500
START POINT FL-03
::-
FL-03 FFL+000 SK-01
Project
FFL+000 SK-01
FL-02 FFL+000
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
THE LORD RAMA 9 -
Drawing title
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 25 FL. Date generated
NOT IN ID SCOPE
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L25-2102
A
Status
02 -
FLOOR FINISHES PLAN (25 FL.) SCALE
1:100
FL-02 FFL+000
-
FL-02 FFL+000
FOR CONSTUCTION -
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
H+100
8500
H+100
H+100
NOTES
8500
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
J
J
J
J
วิศวกรงานระบบ
:
8500
J
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
H+100
J
H+100
J
H+100
H+100
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:H+100
D H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100
Other Party 1 Responsibility
::::Client
8500
::-
J
J
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 25 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L25-2103
A
Status
01 -
POWER OUTLET PLAN (25 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
1000
A B
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::Other Party 1 Responsibility
::::Client
8500
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 25 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L25-2104
A
Status
01 -
WALL FINISHES PLAN (25 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
C
1500
1050
1200
OWNERS : เจ้าของ
700
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1500
4500
3400
Key Plan
D
1200
NOT IN ID SCOPE 12000
01 -
2000
5000 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (26 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
PL-04
NOT IN ID SCOPE
:-
SK-01
Consultant 1 Discipline
:DR-07
Other Party 2 Responsibility
PL-03
::-
-
C
::-
PL-04
DR-02B
SK-01
Other Party 1 Responsibility
DR-02B
DR-06 DR-07
DR-02B
DR-07
DR-06
::::-
DR-02B
::-
DR-AR
DR-AR
Client
DR-03 8500
::Project
DR-03
DR-AR
DR-07
THE LORD RAMA 9
DR-07
DR-02B DR-06 DR-02B
PL-04 SK-01
DR-02B
DR-06
DR-02B
DR-03
Drawing title
D
SETOUT PLAN PARTITION PLAN LEVEL 26 FL. DR-07
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100
PL-04 SK-01
@ A2 sheet size
NOT IN ID SCOPE
Project number
7948
35 mm. on original Drawing number
Revision
ID-L26-2101
A
Status
02 -
PARTITION PLAN (26 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
8500
NOTES
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
CL:01 CH.+2600
C
LPX-1
CL:02
CL:02
CH.+2600
CH.+2600
OWNERS : เจ้าของ :
80
LPX-2
80
ARCHITECTS : สถาปนิก
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
ALIGN
:
:
CH.+2600
05
04
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
CL:01
:
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
CL:02 CH.+2600
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
200
CL:02 CH.+2600
วิศวกรงานระบบ
:
:
30LCP ELP30 CL:01 30 FL. ONLY
INTERIOR DESIGNER :
มัณฑนากร
:
LPX-4
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CH.+2750
Key Plan
LPX-3
D
CL:01 CH.+2600
CL:02 CH.+2600
NOT IN ID SCOPE
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN (26 FL.) SCALE
1:100
FL-02 FFL+000
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
-
Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:Other Party 2 Responsibility
FL-03
::-
FFL+000 SK-01
C
::Other Party 1 Responsibility
FL-02 FFL+000
-
::::Client
::-
START POINT
::-
8500
FL-03
Project
FFL+000 SK-01
FL-02 FFL+000
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
THE LORD RAMA 9 -
Drawing title
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 26 FL.
FL-03 FFL+000 SK-01
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
NOT IN ID SCOPE
Project number
7948
35 mm. on original Drawing number
Revision
ID-L26-2102
A
Status
02 -
FLOOR FINISHES PLAN (26 FL.) SCALE
1:100
FL-02 FFL+000
FOR CONSTUCTION -
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
J
J
J
วิศวกรงานระบบ
:
8500
J
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
H+100
J
H+100
J
H+100
H+100
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:H+100
D H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100
Other Party 1 Responsibility
::::Client
8500
::-
J
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 26 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L26-2103
A
Status
01 -
POWER OUTLET PLAN (26 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
1000
A B
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::Other Party 1 Responsibility
::::Client
8500
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 26 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L26-2104
A
Status
01 -
WALL FINISHES PLAN (26 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
C
1500
1150
1200
OWNERS : เจ้าของ
700
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
1500
4500
3400
Key Plan
D
1200
NOT IN ID SCOPE 12000
01 -
2000
5000 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (27-33 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:Other Party 2 Responsibility
::-
C
::-
PL-04
DR-02B
SK-01
Other Party 1 Responsibility
DR-02B
DR-06 DR-07
DR-02B
DR-07
DR-06
::::-
DR-02B
::-
DR-AR
DR-AR
Client
DR-03 8500
::Project
DR-03
DR-AR
DR-07
THE LORD RAMA 9
DR-07
DR-02B DR-06 DR-02B
PL-04 SK-01
DR-02B
DR-06
DR-02B
DR-03
Drawing title
D
SETOUT PLAN PARTITION PLAN LEVEL 27-33 FL. Date generated
27/03/20 DR-07
PL-04 SK-01
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
NOT IN ID SCOPE
Drawn
Project number
7948
35 mm. on original Drawing number
Revision
ID-L27-2101
A
Status
02 -
PARTITION PLAN (27-33 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
8500
NOTES
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
CL:01 CH.+2600
C
LPX-1
CL:02
CL:02
CH.+2600
CH.+2600
OWNERS : เจ้าของ :
80
LPX-2
80
ARCHITECTS : สถาปนิก
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
ALIGN
:
:
CH.+2600
05
04
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
CL:01
:
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
CL:02 CH.+2600
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
200
CL:02 CH.+2600
วิศวกรงานระบบ
:
:
30LCP ELP30 CL:01 30 FL. ONLY
INTERIOR DESIGNER :
มัณฑนากร
:
LPX-4
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CH.+2750
Key Plan
LPX-3
D
CL:01 CH.+2600
CL:02 CH.+2600
NOT IN ID SCOPE
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN (27-33 FL.) SCALE
1:100
FL-02 FFL+000
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
-
Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:Other Party 2 Responsibility
FL-03
::-
FFL+000 SK-01
C
::Other Party 1 Responsibility
FL-02 FFL+000
-
::::Client
::-
START POINT
::-
8500
FL-03
Project
FFL+000 SK-01
FL-02 FFL+000
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. 02 FLOOR FINISHES PLAN (27-33 FL.) -
SCALE
1:100
THE LORD RAMA 9 -
Drawing title
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 27-33 FL.
FL-03 FFL+000 SK-01
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
NOT IN ID SCOPE
Project number
7948
35 mm. on original Drawing number
Revision
ID-L27-2102
A
Status
FL-02 FFL+000
FOR CONSTUCTION -
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
H+100
NOTES
8500
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
J
J
J
วิศวกรงานระบบ
:
8500
J
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
H+100
J
H+100
J
H+100
H+100
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:H+100
D H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100
Other Party 1 Responsibility
::::Client
8500
::-
J
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 27-33 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L27-2103
A
Status
01 -
POWER OUTLET PLAN (27-33 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
1000
A B
8500
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::Other Party 1 Responsibility
::::Client
8500
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 27-33 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L27-2104
A
Status
01 -
WALL FINISHES PLAN (27-33 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000
NOTES
8500
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
1850
1500
1200
C
OWNERS : เจ้าของ
LT-1 700
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
LT-1
ภูมิสถาปนิก
:
4500
Key Plan
D
NOT IN ID SCOPE 12000
01 -
2000
5000 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (34-35 FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
PL-04
:-
SK-01
Consultant 1 Discipline
:DR-07
Other Party 2 Responsibility
::-
C
::-
PL-04
DR-02B
SK-01
Other Party 1 Responsibility
DR-02B
DR-06 DR-07
DR-02B
DR-07
LT-1
DR-06
::::-
DR-02B
::-
DR-AR
DR-AR
Client
DR-03 8500
::Project
DR-03
DR-AR
DR-07
THE LORD RAMA 9
DR-07
DR-02B DR-06
LT-1 DR-02B
PL-04 SK-01
DR-02B
DR-06
DR-02B
Drawing title
D
SETOUT PLAN PARTITION PLAN LEVEL 34-35 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100
PL-04 SK-01
@ A2 sheet size
NOT IN ID SCOPE
Project number
7948
35 mm. on original Drawing number
Revision
ID-L34-2101
A
Status
02 -
PARTITION PLAN (34-35 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
10
Copyright © THE BEAUMONT PARTNERSHIP 2009
34000 8500
8500
NOTES
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE CL:02 CH.+2600 JOINERY FULL HEIGHT
CL:01 CH.+2600
C
LPX-1 CL:02
CL:02
CH.+2600
CH.+2600 80
OWNERS : เจ้าของ
LPX-2
LT-1 80
:
ARCHITECTS : สถาปนิก
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
ALIGN
:
:
CH.+2600
05
04
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
CL:01
:
MECHANICAL ENGINEERS :
ID-TYP-5301 ID-TYP-5301
CL:02 CH.+2600
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
200
CL:02 CH.+2600
วิศวกรงานระบบ
:
:
INTERIOR DESIGNER :
35LCP ELP35 LT-1 CL:01 35 FL. ONLY
มัณฑนากร
:
LPX-4
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
CH.+2750
Key Plan
LPX-3 D CL:01 CH.+2600
CL:02 CH.+2600
NOT IN ID SCOPE
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN (34-35 FL.) SCALE
1:100
FL-02 FFL+000
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
-
Consultant 3 Discipline
:Consultant 2 Discipline
NOT IN ID SCOPE
:Consultant 1 Discipline
:Other Party 2 Responsibility
FL-03
::-
FFL+000 SK-01
C
::Other Party 1 Responsibility
FL-02 FFL+000
-
LT-1
::::Client
::-
START POINT
::-
8500
FL-03
Project
FFL+000 SK-01
FL-02 FFL+000
THE LORD RAMA 9 -
LT-1
NOTE: · FOR CONSTRUCTION FOR PARTITION D LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
Drawing title
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 34-35 FL.
FL-03 FFL+000 SK-01
Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size
NOT IN ID SCOPE
Project number
7948
35 mm. on original Drawing number
Revision
ID-L34-2102
A
Status
02 -
FLOOR FINISHES PLAN (34-35 FL.) SCALE
1:100
FL-02 FFL+000
FOR CONSTUCTION -
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
H+100
NOTES
8500
H+100
8500
H+100
8500
H+100
H+100
H+100
8500
H+100
H+100
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
J
J
J
วิศวกรงานระบบ
:
8500
J
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
H+100
J
H+100
J
H+100
H+100
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
LT-1 27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:-
LT-1
Consultant 1 Discipline
:H+100
D H+100
J
Other Party 2 Responsibility
::-
J
::-
H+100
Other Party 1 Responsibility
::::Client
8500
::-
J
J
J
J
J
J
::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 34-35 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L34-2103
A
Status
01 -
POWER OUTLET PLAN (34-35 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
5
6
7
8
9
10
11
8500
8500
8500
NOTES
8500
1000
A B
Copyright © THE BEAUMONT PARTNERSHIP 2009
51000 8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
LT-1 27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
LT-1
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::Other Party 1 Responsibility
::::Client
8500
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 34-35 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L34-2104
A
Status
01 -
WALL FINISHES PLAN (34-35 FL.) SCALE
1:100
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
8500
Copyright © THE BEAUMONT PARTNERSHIP 2009
25500
NOTES
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
NOT IN ID SCOPE
C
OWNERS : เจ้าของ
900
:
ARCHITECTS : สถาปนิก :
900
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
8500
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
4500
Key Plan
D
NOT IN ID SCOPE 15300
01
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
SETOUT PLAN (36 FL.) SCALE
-
3700
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
PL-04
DR-07
SK-01
PL-04 SK-01
:Consultant 2 Discipline
:-
NOT IN ID SCOPE
Consultant 1 Discipline
PL-04
:-
SK-01
Other Party 2 Responsibility
DR-06
::-
C
::Other Party 1 Responsibility
::::-
DR-AR
Client
8500
::::Project
DR-AR
PL-01
THE LORD RAMA 9
SK-01
DR-06
D
Drawing title
SETOUT PLAN PARTITION PLAN LEVEL 36 FL.
PL-04 SK-01
NOT IN ID SCOPE
Date generated
PL-04 SK-01
DR-07
PL-04 SK-01
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36-2101
A
Status
02 -
PARTITION PLAN (36 FL.) SCALE
FOR CONSTUCTION 1:100
MF. MF. MF. MF. MF. MF. App'd
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
6
7
8
9
Copyright © THE BEAUMONT PARTNERSHIP 2009
25500 8500
NOTES
8500
8500
NOT IN ID SCOPE
C
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ
CL:02
:
CH.+2600
80
ARCHITECTS : สถาปนิก
80
:
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง ALIGN
8500
CL:01 CH.+2600
:
ALIGN
CL:01
05
04
CH.+2600
ID-TYP-5301
:
MECHANICAL ENGINEERS :
วิศวกรสุขาภิบาล
SANITARY ENGINEERS :
OBSTRUCTION LIGHT CONTROL BOX
CL:02 CH.+2600
วิศวกรงานระบบ
:
ID-TYP-5301
200
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
:
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
CL:01
ภูมิสถาปนิก
:
CH.+2750
Key Plan
D
NOT IN ID SCOPE
5 01 -
6
REFLECTED CEILING PLAN (36 FL.) 8500 SCALE
7
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8
JOINERY FULL HEIGHT
25500 8500
1:100
8500
FL-03
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:-
FFL+000 SK-01
Consultant 3 Discipline
:Consultant 2 Discipline
:-
NOT IN ID SCOPE
Consultant 1 Discipline
:Other Party 2 Responsibility
::-
C
::Other Party 1 Responsibility
::::Client
::8500
::-
FL-02
Project
FFL+000 SK-01
THE LORD RAMA 9
Drawing title
D
REFLECTED CEILING PLAN FLOOR FINISHES PLAN LEVEL 36 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100
NOT IN ID SCOPE
@ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36-2102
A
Status
02 -
FLOOR FINISHES PLAN (36 FL.) SCALE
1:100
FL-03 FFL+000 SK-01
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
25500 8500
8500
H+100
H+100
8500
H+100
H+100
1000
A B
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
J
J
8500
J
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
J
H+100
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
H+100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
H+100
:Other Party 2 Responsibility
D H+100
::::-
J
Other Party 1 Responsibility
::::-
8500
Client
J
J
J
::::Project
THE LORD RAMA 9
1000
E Drawing title
F H+100
H+100
H+100
H+100
POWER OUTLET PLAN LEVEL 36 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
01 -
POWER OUTLET PLAN (36 FL.)
7948
SCALE
Status
1:100
35 mm. on original Drawing number
Revision
ID-L36-2103
A
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
25500 8500
1000
A B
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
8500
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:Other Party 2 Responsibility
D
::::Other Party 1 Responsibility
::::Client
8500
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 36 FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
01 -
WALL FINISHES PLAN (36 FL.)
7948
SCALE
Status
1:100
35 mm. on original Drawing number
Revision
ID-L36-2104
A
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
6 8500
6
7
8
9
OWNERS : เจ้าของ :
25500 8500
8500
ARCHITECTS : สถาปนิก
8500
:
PL-06 -
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
DR-08
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
C
900
C
900
PL-06
8500
NOT IN ID SCOPE
1400
2500
8500
1400
1400
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
-
1400
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:-
D
D
Consultant 1 Discipline
:Other Party 2 Responsibility
::::-
DR-08
Other Party 1 Responsibility
::::-
PL-06 -
Client
::::Project
THE LORD RAMA 9
01 -
SETOUT PLAN (36M FL.) SCALE
1:100
02 -
PARTITION PLAN (36M FL.) SCALE
1:100 Drawing title
SETOUT PLAN PARTITION PLAN LEVEL 36M FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36M-2101 A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
6
7
8
9
Copyright
25500 8500
© THE BEAUMONT PARTNERSHIP 2009
8500
NOTES
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
C
OWNERS : เจ้าของ
80
:
80
ARCHITECTS : สถาปนิก
8500
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง
ALIGN
ALIGN
:
:
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า
CL:01
NOT IN ID SCOPE
05
04
CH.+2600
:
MECHANICAL ENGINEERS :
ID-TYP-5301
ID-TYP-5301
วิศวกรงานระบบ
200
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
CL:01
ภูมิสถาปนิก
:
CH.+2750
Key Plan
D
01 -
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
REFLECTED CEILING PLAN PLAN (36M FL.) SCALE
1:100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
MF. MF. MF. MF. MF. MF. App'd
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:-
C
Other Party 2 Responsibility
NOT IN ID SCOPE
::::Other Party 1 Responsibility
::::-
START POINT 8500
Client
::-
FL-03 FFL+000 SK-01
::Project
THE LORD RAMA 9
NOT IN ID SCOPE D
02 -
FLOOR FINISHES PLAN (36M FL.) SCALE
1:100
NOTE: · FOR CONSTRUCTION FOR PARTITION LAYOUTS ONLY. · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.
Drawing title
REFLECTED CEILING PLAN PLAN FLOOR FINISHES PLAN LEVEL 36M FL. Date generated
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36M-2102 A
Status
FOR CONSTUCTION
Copyright © THE BEAUMONT PARTNERSHIP 2009
5
6
7
8
25500 8500
8500
H+100
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
8500
H+100
H+100
NOTES
H+100
1000
A B
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
J
J
8500
J
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
H+100
C
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
H+100
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
H+100
:Consultant 1 Discipline
:-
D
Other Party 2 Responsibility
::-
H+100
::Other Party 1 Responsibility
::8500
::Client
J
J
J
::::Project
THE LORD RAMA 9
1000
E F H+100
H+100
H+100
H+100
Drawing title
POWER OUTLET PLAN LEVEL 36M FL. Date generated
01 -
27/03/20
POWER OUTLET PLAN (36M FL.) SCALE
Drawn
Checked
Approved
-
-
MF.
Scale
1:100
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36M-2103 A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd
Copyright © THE BEAUMONT PARTNERSHIP 2009
NOTES
5
6
7
8
25500 8500
1000
A B
8500
8500
CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION
OWNERS : เจ้าของ :
ARCHITECTS : สถาปนิก :
STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :
ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :
8500
MECHANICAL ENGINEERS :
วิศวกรงานระบบ
:
วิศวกรสุขาภิบาล
SANITARY ENGINEERS : :
INTERIOR DESIGNER :
มัณฑนากร
:
LANDSCAPE DESIGNER :
ภูมิสถาปนิก
:
Key Plan
E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline
8500
27500
C
27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date
:Consultant 3 Discipline
:Consultant 2 Discipline
:Consultant 1 Discipline
:D
Other Party 2 Responsibility
::::Other Party 1 Responsibility
::::-
8500
Client
::::Project
THE LORD RAMA 9
1000
E Drawing title
F
WALL FINISHES PLAN LEVEL 36M FL. Date generated
02 -
WALL FINISHES PLAN PLAN (36M FL.) SCALE
1:100
27/03/20
Drawn
Checked
Approved
-
-
MF.
Scale
1:100 @ A2 sheet size Project number
7948
35 mm. on original Drawing number
Revision
ID-L36M-2104 A
Status
FOR CONSTUCTION
MF. MF. MF. MF. MF. MF. App'd