Typical Detail Lord Rama IV

Page 1

TYPICAL DETAILS DATE 27.03.2020 FOR CONSTRUCTION DRAWING

THE LORD RAMA 9 7948

FOR CONSTRUCTION

INTERIOR WORKING DRAWING


DRAWING LIST DWG.NO.

DRAWING LIST

DESCRIPTION

DWG.NO.

TYPICAL DETAILS SERIES

DESCRIPTION

ID-TYP-7001

JOINERY DETAIL : JO-01

ID-TYP-7002

JOINERY DETAIL : JO-02

Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

ID-TYP-4001

PASSENGER LIFT DETAIL : PLAN , ELEVATION

LEVEL B1

ID-TYP-4002

OFFICE LIFT DETAIL : PLAN , ELEVATION

LEVEL 1-7

ID-TYP-4003

OFFICE LIFT DETAIL : PLAN , ELEVATION

LEVEL 8-21

ID-TYP-4004

OFFICE LIFT DETAIL : PLAN , ELEVATION

LEVEL 22

ID-TYP-4005

OFFICE LIFT DETAIL : PLAN , ELEVATION

LEVEL 23-36

ID-TYP-4006

TYPICAL LIFT INTERIOR

ID-TYP-4201

PUBLIC TOILET DETAIL : PLAN

LEVEL B1

ID-TYP-4202

PUBLIC TOILET DETAIL : ELEVATION 01,02

LEVEL B1

ID-TYP-4203

PUBLIC TOILET DETAIL : ELEVATION 03,04

LEVEL B1

ID-TYP-4204

PUBLIC TOILET DETAIL : ELEVATION 05,06

LEVEL B1

ID-TYP-4205

PUBLIC TOILET DETAIL : ELEVATION 07,08

LEVEL B1

ID-TYP-4206

PUBLIC TOILET DETAIL : PLAN

LEVEL 1,7

ID-TYP-4207

PUBLIC TOILET DETAIL : ELEVATION 01,02

LEVEL 1,7

OWNERS : เจ้าของ

ID-TYP-4208

PUBLIC TOILET DETAIL : ELEVATION 03,04

LEVEL 1,7

ARCHITECTS : สถาปนิก

ID-TYP-4209

PUBLIC TOILET DETAIL : ELEVATION 05,06,07

LEVEL 1,7

ID-TYP-4210

PUBLIC TOILET DETAIL : ELEVATION 08,09,10,11

LEVEL 1,7

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

ID-TYP-4211

PUBLIC TOILET DETAIL : PLAN

LEVEL 2-6

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

ID-TYP-4212

PUBLIC TOILET DETAIL : ELEVATION 01,02

LEVEL 2-6

ID-TYP-4213

PUBLIC TOILET DETAIL : ELEVATION 03,04

LEVEL 2-6

:

ID-TYP-4214

PUBLIC TOILET DETAIL : ELEVATION 05,06

LEVEL 2-6

SANITARY ENGINEERS :

:

:

:

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

วิศวกรสุขาภิบาล

:

ID-TYP-4215

PUBLIC TOILET DETAIL : ELEVATION 07

LEVEL 2-6

ID-TYP-4216

TYPICAL TOILET DETAIL : PLAN

LEVEL 9-22,25

TYPE-B

ID-TYP-4217

TYPICAL TOILET DETAIL : PLAN

LEVEL 8-22,25

TYPE-A

ID-TYP-4218

TYPICAL TOILET DETAIL : ELEVATION 01,02

LEVEL 8-22,25

TYPE-A,B

ID-TYP-4219

TYPICAL TOILET DETAIL : ELEVATION 03,04,05

LEVEL 8-22,25

TYPE-A,B

ID-TYP-4220

TYPICAL TOILET DETAIL : ELEVATION 06,07

LEVEL 8-22,25

TYPE-A,B

ID-TYP-4221

TYPICAL TOILET DETAIL : PLAN

LEVEL 8

TYPE-B

ID-TYP-4222

TYPICAL TOILET DETAIL : ELEVATION 01,02

LEVEL 8

TYPE-B

ID-TYP-4223

TYPICAL TOILET DETAIL : ELEVATION 03,04,05,06,07 LEVEL 8

TYPE-B

ID-TYP-4224

TYPICAL TOILET DETAIL : PLAN , ELEVATION 01,02

LEVEL 8-35

TYPE-C

ID-TYP-4225

TYPICAL TOILET DETAIL : ELEVATION 03,04,05,06

LEVEL 8-35

TYPE-C

ID-TYP-4226

TYPICAL TOILET DETAIL : ELEVATION 07

LEVEL 8-35

TYPE-C

ID-TYP-4227

TYPICAL TOILET DETAIL : PLAN

LEVEL 24,26-35

TYPE-A,B

ID-TYP-4228

TYPICAL TOILET DETAIL : ELEVATION 01,02

LEVEL 24,26-35

TYPE-A,B

ID-TYP-4229

TYPICAL TOILET DETAIL : ELEVATION 03,04,05,06

LEVEL 24,26-35

TYPE-A,B

ID-TYP-4230

TYPICAL TOILET DETAIL : ELEVATION 07

LEVEL 24,26-35

TYPE-A,B

ID-TYP-4231

TYPICAL TOILET DETAIL : PLAN , ELEVATION 01,02

LEVEL 23

TYPE-A,B

ID-TYP-4232

TYPICAL TOILET DETAIL : ELEVATION 03,04,05,06

LEVEL 23

TYPE-A,B

ID-TYP-4233

TYPICAL TOILET DETAIL : ELEVATION 07,08

LEVEL 23

TYPE-A,B

ID-TYP-4234

TYPICAL TOILET DETAIL : PLAN

LEVEL 36

:-

ID-TYP-4235

TYPICAL TOILET DETAIL : ELEVATION 01,02

LEVEL 36

Consultant 2 Discipline

ID-TYP-4236

TYPICAL TOILET DETAIL : ELEVATION 03,04

LEVEL 36

:-

ID-TYP-4237

TYPICAL TOILET DETAIL : ELEVATION 05,06

LEVEL 36

Consultant 1 Discipline

ID-TYP-4238

TYPICAL TOILET DETAIL : ELEVATION 07,08

LEVEL 36

:-

ID-TYP-5101

TYPICAL PARTITION DETAIL : PL-01 , PL-02

ID-TYP-5102

TYPICAL PARTITION DETAIL : PL-03 , PL-04

::-

ID-TYP-5103

TYPICAL PARTITION DETAIL : PL-06

::-

ID-TYP-5104

TYPICAL PARTITION DETAIL : PL-07

Other Party 1 Responsibility

ID-TYP-5105

TYPICAL PARTITION DETAIL : PL-07

::-

ID-TYP-5201

TYPICAL SECTION FLOORING DETAIL

ID-TYP-5301

TYPICAL SECTION CEILING DETAIL

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

Other Party 2 Responsibility

::Client

::ID-TYP-5401

TYPICAL COLUMN DETAIL : C1

ID-TYP-5402

TYPICAL COLUMN DETAIL : C2

ID-TYP-5403

TYPICAL COLUMN DETAIL : C3

ID-TYP-5404

TYPICAL RAMP DETAIL : PLAN

ID-TYP-5405

TYPICAL RAMP DETAIL : ELEVATION

ID-TYP-6201

TYPICAL DOOR DETAIL : DR-01,DR-02A,DR-02B

ID-TYP-6202

TYPICAL DOOR DETAIL : DR-03,DR-04,DR-05

ID-TYP-6203

TYPICAL DOOR DETAIL : DR-06,DR-07,DR-08

ID-TYP-6204

TYPICAL DOOR DETAIL : DR-09,DR-10

ID-TYP-6301

TYPICAL DOOR SECTION : DR-01

ID-TYP-6302

TYPICAL DOOR SECTION : DR-02A, DR-02B, DR-05

ID-TYP-6303

TYPICAL DOOR SECTION : DR-04

ID-TYP-6304

TYPICAL DOOR SECTION : DR-07

27/03/20

TYPICAL DOOR SECTION : DR-08

Scale

ID-TYP-6305

::Project

THE LORD RAMA 9

Drawing title

LIST OF DRAWING & DESCRIPTION

Date generated

Drawn

Checked

Approved

-

-

MF.

NTS. @ A2 sheet size

35 mm. on original

Project number

Drawing number

Revision

7948

ID-0001

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

SYMBOL

SYMBOL

SYMBOL

SYMBOL

DESCRIPTION

ชื่อห้อง

ROOMNAME A FFL +0 050 SSL0 000 FF 04

ชื่อห้อง ROOMNAME ROOM NUMBER FLOOR FINISH FLOOR STRUCTURE FLOOR FINISHES NUMBER

DESCRIPTION

SYMBOL

DESCRIPTION

EXISTING ( SECTION )

FLOOR ( SECTION )

MASONRY WALL ( SECTION )

PLASTER.BOARD ( SECTION )

INSULATION ( SECTION )

CONCRETE ( SECTION )

STONE ( SECTION )

FOAM / PLASTIC ( SECTION )

GLASS ( SECTION )

GLASS ( ELEVATION )

N SHOW NORTH DIRECTION

ELEVATION ELEVATION NUMBER

01 ID-XX-3001

OWNERS : เจ้าของ

SHEET NUMBER

SHOW SECTION LINE

SHEET NUMBER

SOLID TIMBER ( SECTION )

WOOD PACKER ( SECTION )

ALUMINUM ( SECTION )

PLYWOOD / CEMENT BOARD ( SECTION )

CEILING CODE

CL:01

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

CEILING SYMBOL

CH.+3000

:

ARCHITECTS : สถาปนิก :

ELEVATION NUMBER

01 ID-XX-3001

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

MECHANICAL ENGINEERS :

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

HEIGHT CEILING

วิศวกรงานระบบ

:

:

ACOUSTIC BOARD ( SECTION )

PARTITION SYMBOL

MDF BOARD ( SECTION )

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

P-XX

PARTITION CODE

Key Plan

WALL SYMBOL

WALL CODE

DETAIL SYMBOL ELEVATION NUMBER

01 ID-XX-5000

SHEET NUMBER E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

REFERENCE, RL SECTIONSPOT FFL.+0.000

BOUNDARY LINES

:-

REFERENCE, SLOPE / SLIDE SLOPE 1:200

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 3 Discipline

SLIDE

:Consultant 2 Discipline

REFERENCE CENTER LINE

REFERENCE SETOUT SET OUT

C L

CENTER LINE

:Consultant 1 Discipline

:Other Party 2 Responsibility

GRID NUMBER

::-

1

VERTICAL GRID LINE

::Other Party 1 Responsibility

A

HORIZONTAL GRID LINE

::::-

0 000

DIMENSION - CENTER TO CENTER

0 000 0 000

Client

DIMENSION - CENTER TO SIDE

::-

DIMENSION - SIDE TO SIDE

::Project

THE LORD RAMA 9

DOOR SYMBOL DOOR CODE

DR:00

DOOR Drawing title

WINDOW SYMBOL WINDOW CODE

SYMBOLS

Date generated

WD:01

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

WINDOW

NTS. @ A2 sheet size

35 mm. on original

Project number

Drawing number

Revision

7948

ID-0002

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

FIXED DECORATION WORK SPECIFICATION 1.00 GENERAL NOTES

12.00 COLOR WORK

1.01 All works shall be carried out in a neat, clean, and organized manner. 1.02 Contractor shall provide all tools necessary for the completion of the works. 1.03 Contractor shall ensure that the working area is properly contained in a manner not to obstruct access, or convenience for work by Others. 1.04 Contractor shall be responsible for the works and must take all necessary protective measures to ensure against damage to the works.

12.01 Spray Color - Apply shellac thoroughly and sand with fine sandpaper. Dust off and apply one full coat of spray color, dry completely and sand smooth with fine sandpaper. Apply three coats of final spray color. 12.02 On MDF ensure that the surface shall be clean, dry and smooth prior to paint application. Apply one coat of primer and let dry. Apply one undercoat of paint. Apply two coats of final emulsion paint color coat. 12.03 Natural Wood Grain - Must be coated with shellac, exposed surface of finish work shall be dressed smooth, and sanded with fine sandpaper. Dust smooth and apply three coats of shellac, then apply lacquer finish as specified. 12.04 Wood Stain - Wash finish wood surface with care and dry clean. Sand smooth with fine sandpaper, wash clean, and dry. Apply two coats of wood stain to surface, dry and sand smooth, then apply lacquer finish as specified. 12.05 Lacquer Finish - Wash finish surface and dry clean. Apply two coats of "isocyanide lacquer" then sand smooth, then apply two more coats. Dry for at least five (5) hours then coat with "olisand" and rub smooth with fine grit steel wool. Clean and clear with water.

2.00 WORKMANSHIP 2.01 All works must be installed plumb and level, unless otherwise noted in drawings. 2.02 All joints must be perfectly flushed and smooth. 2.03 All surfaces must be sanded smooth and free of burrs before final surface finishing.

OWNERS : เจ้าของ

3.00 WOOD WORK 13.00 GRANITE & MARBLE FLOOR 3.01 All finishing wood shall be grade A quality, without any sap knots, which will cause the damage to finish surfaces. 3.02 All wood shall be of good quality and suitable for all kinds of work. Wood pieces are to be cut in the same regular lengths. In conditions where wood pieces are connected by joints, all timber joints to be clean and neat. 3.03 Seasoned and Dry - All wood used in furniture must be properly seasoned and dry before use. 3.04 All wood shall be treated against insects and protected accordingly. 3.05 In case of wood damage by bending, twisting, or warping, Contractors have full responsibility for such damage. 3.06 In cases where the wood needs to be repaired, cracks and holes must be properly filled with the same type of wood and concealed seamlessly before final surface finishing. 3.07 Dowel jointing - For dowel joint method in wood work, a hardwood must be used in the "dovetail" method. 3.08 All wood work must follow drawings, including framing works and method of installation. 4.00 WOOD VENEER 4.01 Wood veneer used must be free from frame shakes, excessive knots, and insects. 4.02 Any wood veneer that has joints, must use a matching joint strip of the same kind of veneer wood. 4.03 Glue used for veneer application should be polyvinyl acrylic (PVA) type, that is suitable for the works. Any other kinds of glues should be approved for use.

5.00 PLASTIC LAMINATE 5.01 5.02 5.03 5.04

Use imported plastic laminate materials as specified by Designer, or as indicated in drawings. Contractor must provide samples for approval. Glue used for application of plastic laminate should be Dunlop glue, or approved equal. Unless otherwise noted, plastic laminate should be properly adhered to 10mm thk. plywood backing.

6.00 PLYWOOD 6.01 Use Elephant Brand plywood, or as specified in drawings. 6.02 Wood frames for plywood structure shall use Yom Hom wood, Sayaa wood or Tabak wood, unless otherwise noted.

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

:

ARCHITECTS : สถาปนิก :

13.01 13.02 13.03 13.04 13.05

All granite and marble natural cut stone shall be as specified. Contractor shall provide suitable samples to determine range of approved stone variations. All granite and marble shall be level, of uniform thickness, and free of surface defects. All granite and marble shall be cut according to sizes, patterns, and color scheme as indicated in drawings. Installation of granite and marble shall be first class workmanship and shall be laid according to drawings and by specified method of installation.

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

14.00 CEILING WORK

:

INTERIOR DESIGNER :

14.01 Gypsum board ceiling shall be a minimum 9mm thickness and must be mounted on a metal suspension system consisting of sections as indicated in drawings. All sections and accessories such as hangers, splices, hanger clips and bolts shall be standard manufacturer products. Installation shall be as recommended by manufacturer. Joints and nail spots shall be repaired and made good prior to attempting painting. 14.02 Wood panel ceiling shall follow specifications as covered under wall paneling.

วิศวกรงานระบบ

:

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

15.00 FURNITURE & JOINERY WORK 15.01 Wood Frame - Wood framing in joinery to use hardwood frame as the same material as plywood in cases where this is clearly visible. Unless otherwise noted, use Yom Hom wood, Sa Yaa wood, Ta Bak wood, or Ta kian wood. 15.02 Carcass - Furniture carcass and shell to use the same kinds of plywood for exterior and interior faces, as indicate in the drawings. 15.03 Top Surface - Furniture thickness for plywood shall not be less than 10mm, unless otherwise noted. Top surface shall be fixed and mounted on hardwood frame. 15.04 Color and Surface - In case of using natural wood, choose a wood panel that matches in color and grain pattern. Paint color used for furniture shall be matched to approved sample as shown. For wood stain, Contractors shall match wood stain samples as approved by Designer only. 15.05 Cabinet Doors and Drawer Faces - Use plywood on both faces properly fixed on hardwood frame, with thickness only as indicated in drawings. Size and shape of hardwood frame only as indicated in drawings. 15.06 Adjustable Shelf - Both sides to use plywood, top side shall be no less than 6mm thick, bottom side no less than 3mm thick, unless otherwise noted. Shelf to be mounted on hardwood frame, as indicated in drawings.

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:7.00 GLASS

Consultant 2 Discipline

:7.01 7.02 7.03 7.04 8.00 8.01 8.02 8.03 8.04

All glass shall be specified as Grade A, without distortions or bubbles, and free of any surface defects. All glass used needs to have a brand name, type of glass, and thickness as specified in drawings. All glass cutting works shall be of first class workmanship. Unless otherwise noted, silicone or putty for glass work has to be heat proof. MIRROR All mirrors shall be specified as Grade A, distortion free, and cut precisely as per drawings. All mirrors should be a local specification from TGSG, or approved equal The minimum thickness for mirrors must be at least 6mm thick. Unless otherwise noted, all mirrors should be properly adhered to 10mm thk. plywood backing.

9.00 STEEL WORK 9.01 9.02 9.03 9.04

Steel works and screws must be made from the same material. All the steel works to be matched in finish and material. All welding works must be done in a neat and clean manner, with no excess welding material on the finished weld Any surface defects in other materials caused by welding shall be the responsibility of the Contractor to repair or replace and shall be done at cost to Contractor. All steel materials and frames that require use of a truss, must use light grade steel.

Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

10.00METAL WORK 10.01 10.02 10.03 10.04 10.05 10.06

All metals in use shall be specified as Grade A. All metals shall be brand new, free from rust, and with no visible fissures, cracks, dents, or scratches. All metal works that are on the floor must have a rubber padding on the bottom surface. All the metal jointing shall be done with a proper welding machine. All welds shall be of first class workmanship, with all weld joints to be dressed smooth. Welding work needs to be neat and clean, without any burns, cracks, or defects arising from workmanship.

11.00 WALL COVERING

Drawing title

FIXED DECORATION WORK SPECIFICATION

Date generated

11.01 11.02 11.03 11.04 11.05

All wall covering materials, such as vinyl or wall paper, shall be specified as per drawings. Contractors must cover nail holes and screwhead fixings, smoothen surface, and apply one coat of primer paint before wall covering finish All wall covering must be applied flush and smooth with no visible seam joints between panels. All internal and external corners to wall covering finish should be crisp and clean. Wall covering installation shall be of first class workmanship.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:125 @ A2 sheet size

35 mm. on original

Project number

Drawing number

Revision

7948

ID-0003

A

Status

FOR CONSTUCTION


Copyright

3

4

5

6

7

PASSENGER LIFT 1FL-7FL

8

85000

8500

แนวเขตที่ดิน

8500

8500

2 8500

8500

1

8500

8500

8500

FEMALE

VENT.

A 1000

DISABLE

SPIRIT HOUSE

C2 C1

C1 TERRACE

MALE

ID-TYP-4206

130 sq.m.

112 sq.m.

RETAIL AREA 9

RETAIL AREA 10

112 sq.m.

86 sq.m.

RETAIL AREA 11

RETAIL AREA 12

BEN CH

MEP shaft

NC H

-

JO-02

ID-TYP-4107

BE

8500

C2

C1

DN

B

NOT IN ID SCOPE UP

ID-TYP-7002 UP

BOUNDARYAREA RETAIL LINE

VOID

FHC.

UP

LIFT

UP UP

FD. FD. HAND-RAIL

C1

C3 ID-TYP-5403

UP

BIN

C1

C1

C2

HAND-RAIL

C3

BENCH

UP

CORRIDOR ID-TYP-4002

C2 ID-TYP-5402

RECYCLE

C1 ID-TYP-5401

C

LIFT

UP

UP

UP

DN

DN

ID-TYP-4001

-

8500

UP UP

27500

UP UP

ID-TYP-5106

HALL

PASSENGER LIFT

LIFT HALL

HALL

ID-TYP-4103,4105 HAND-RAIL

CORRIDOR AREA

แนวเขตที่ดิน

UP

391.28 sq.m.

UP

HAND-RAIL

FD. FD.

D UP

C1 UP

C1

C1

C2

C3

CORRIDOR

UP UP

FHC.

UP

UP

78 sq.m. RETAIL AREA 13 8500

UP

NOT IN ID SCOPE DN

MEP

80 sq.m.

shaft

RETAIL AREA 14

MEP

1000

E

© THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

F

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

REMARK :

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN 1 FL. SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

01 ID-TYP-4006

03

2500

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1000

VAREIS

R 10

0

1000

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

1200

2350

:Consultant 3 Discipline

02

:Consultant 2 Discipline

VARIES

:Consultant 1 Discipline

R1 0

675

1100

425

100

425

:0

1100

Other Party 2 Responsibility

675

4500

::-

01

::LIFT -

Other Party 1 Responsibility

B1-7FL PASSENGER LIFT / PLAN SCALE

1:50

::::Client

::::CH.+2600MM.

600

GL-02 MIRROR FINISH

CH.+2600MM.

CH.+2600MM.

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

GL-02 MIRROR FINISH

Project

THE LORD RAMA 9

GL-02

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: SOLID SURFACE FINISH AS SCHEDULED

WALL ELEVATOR: SOLID SURFACE FINISH AS SCHEDULED ST-02

ST-02

ST-02

ST-02

ST-02

SOLID SURFACE FINISH

SOLID SURFACE FINISH

SOLID SURFACE FINISH

2550

ST-02 SOLID SURFACE FINISH

2600

ST-02 SOLID SURFACE FINISH

2550

ST-02 SOLID SURFACE FINISH

2600

2600

ST-02

WALL ELEVATOR: SOLID SURFACE FINISH AS SCHEDULED

CT-06 CERAMIC TILES FINISH

ST-02 SOLID SURFACE FINISH

1950

GL-02 GLASS COATED FINISH WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

CALL BUTTON AS BECA SPEC

Drawing title

GL-02

GL-02

CERAMIC TILE FINISH (CT-06)

FFL.+00MM.

2 MM. THK. STAINLESS STEEL KICK PLATE 50

FFL.+00MM.

2 MM. THK. STAINLESS STEEL KICK PLATE 50

50

2 MM. THK. STAINLESS STEEL KICK PLATE

FFL.+00MM.

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED 675

1100

425

100

425

1100

PASSENGER LIFT DETAIL PLAN , ELEVATION LEVEL B1,1-7 Date generated

675

575

1200

4500

575

1000

2350

2500 4500

1000

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size Project number 01 -

ELEVATION SCALE

1:50

02 -

ELEVATION SCALE

1:50

03 -

ELEVATION SCALE

1:50

7948

35 mm. on original Drawing number

Revision

ID-TYP-4001

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright

3

4

5

6

7

OFFICE LIFT 1FL-7FL

8

85000

8500

แนวเขตที่ดิน

8500

8500

2 8500

8500

1

8500

8500

8500

FEMALE

VENT.

A 1000

DISABLE

SPIRIT HOUSE

C2 C1

C1

MALE

ID-TYP-4206

130 sq.m.

112 sq.m.

RETAIL AREA 9

RETAIL AREA 10

TERRACE

112 sq.m.

86 sq.m.

RETAIL AREA 11

RETAIL AREA 12

BEN CH

MEP shaft

NC H

-

JO-02

ID-TYP-4107

BE

8500

C2

C1

DN

B

NOT IN ID SCOPE UP

ID-TYP-7002 UP

BOUNDARYAREA RETAIL LINE

VOID

FHC.

UP

LIFT

UP UP

FD. FD. HAND-RAIL

C1

C2

C3

ID-TYP-5402

ID-TYP-5403

UP

BIN

C1

C1

C2

HAND-RAIL

C3

BENCH

UP

CORRIDOR ID-TYP-4002 RECYCLE

C1 ID-TYP-5401

C

LIFT

UP

UP

UP

DN

DN

ID-TYP-4001

-

8500

UP UP

27500

UP UP

ID-TYP-5106

HALL

LIFT HALL

HALL

ID-TYP-4103,4105 HAND-RAIL

CORRIDOR AREA

แนวเขตที่ดิน

UP

391.28 sq.m.

UP

HAND-RAIL

FD. FD.

D UP

C1 UP

C1

C1

C2

C3

CORRIDOR

UP UP

FHC.

UP

UP

78 sq.m. RETAIL AREA 13 8500

UP

NOT IN ID SCOPE DN

MEP

80 sq.m.

shaft

RETAIL AREA 14

MEP

1000

E

© THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

F

User 0

STAFF OFFICE

OWNERS : เจ้าของ : 1050

12 -

25

1100

25 80

1470

25

1100

25 80

1670

25

1100

25 80

1470

25

1100

25 80

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

645

แนวเขตที่ดิน

11225

REMARK :

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

GL-02

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

01

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

FURNITURE LAYOUT PLAN 1 FL.

A

SCALE

-

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

03

MECHANICAL ENGINEERS :

1:500 02 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

25

1100

25

1450

100

25

1100

25 100

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

11225 1050

วิศวกรงานระบบ

:

1650

25

1100

25 100

1450

25

1100

25 100

INTERIOR DESIGNER :

625 WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

OFFICE LIFT

GL-02

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

LIFT -

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1FL-7FL PASSENGER LIFT / PLAN SCALE

1:50

CH.+3000MM.

900

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

SS-01 GLASS COATED FINISH

SS-01 STAINLESS FINISH

LEVEL INDICATOR AS BECA SPEC

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

LEVEL INDICATOR AS BECA SPEC

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

LEVEL INDICATOR AS BECA SPEC

GL-02 GLASS COATED FINISH

:Consultant 3 Discipline

:-

SS-01 WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

LEVEL INDICATOR AS BECA SPEC

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 2 Discipline

:-

GL-02

3000

Consultant 1 Discipline

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

:-

GL-02 GLASS COATED FINISH

2050

GL-02 GLASS COATED FINISH

Other Party 2 Responsibility 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

CALL BUTTON AS BECA SPEC

CALL BUTTON AS BECA SPEC

::-

CALL BUTTON AS BECA SPEC

::-

50

2 MM. THK. STAINLESS STEEL KICK PLATE

Other Party 1 Responsibility

FFL.+00MM.

1050

25

1100

25 80

1470

25

1100

25 80

1670

25

1100

25 80

1470

25

1100

25 80

::::-

645

11225

Client 01 -

ELEVATION SCALE

1:50

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

1200

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

200

GL-02 CH.+3000MM.

::::Project

CH.+3000MM.

THE LORD RAMA 9

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED SS-01

LEVEL INDICATOR AS BECA SPEC

LEVEL INDICATOR AS BECA SPEC

GL-02

3000 GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

SIGNAGE AREA

GL-02 GLASS COATED FINISH

1950

GL-02 GLASS COATED FINISH

2950

LEVEL INDICATOR AS BECA SPEC

3200

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

Drawing title

GL-02 GLASS COATED FINISH

OFFICE LIFT DETAIL PLAN , ELEVATION LEVEL 1-7

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

CALL BUTTON AS BECA SPEC

CALL BUTTON AS BECA SPEC

CALL BUTTON AS BECA SPEC

Date generated

27/03/20

FFL.+00MM.

50

50

2 MM. THK. STAINLESS STEEL KICK PLATE FFL.+00MM.

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size 725

25

1100

25

1550

25

1100

25

1750

25

1100

25

1550

25

1100

25

1050

Project number

11225

03 -

02 -

35 mm. on original

2400

ELEVATION SCALE

1:50

7948

Drawing number

Revision

ID-TYP-4002

A

ELEVATION

Status

SCALE

FOR CONSTUCTION

1:50

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

OFFICE LIFT 8FL-21FL 5

6

7

8

9

10

11 8500

8500

8500

8500

8500

51000

8500

1000

A B

C2

C2

C2

8500

AREA FOR RENT (OFFICE)

ID-TYP-4217

C2

C2

C2

C2 ID-TYP-5401

2

3

AREA FOR RENT (OFFICE)

AREA FOR RENT (OFFICE)

159 sq.m.

294 sq.m.

-

1

C2

187 sq.m.

JO-02 ID-TYP-7002

FEMALE

MALE

MALE

FEMALE

MEP Unit

C2

MEP Unit

C

MALE

C2

MEP Center

FHC.

C2

MEP Unit

RECYCLE BIN

FEMALE

UP LIFT HALL

8500

27500

LIFT

FHC. ID-TYP-4004

NOT IN ID SCOPE

UP

D-01

FEMALE

ID-TYP-4224

DN

NOT IN ID SCOPE MEP Unit

D

MEP Center MEP Unit

FIRE COMPARTMENT AREA (NO ACCESS)

C2

C2

MALE

MALE FEMALE

5

6

AREA FOR RENT (OFFICE)

AREA FOR RENT (OFFICE)

158 sq.m.

291 sq.m.

8500

4 AREA FOR RENT (OFFICE) 200 sq.m. WC

ID-TYP-4221

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

C2 ID-TYP-5401

C2

C2

C2

C2

C2

C2

C2

OWNERS : เจ้าของ

1000

E F

: 1025

25

1100

100

25

1450

25

1100

100 25

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

795

5770

6980

GL-02

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

A -

01

FURNITURE LAYOUT PLAN 8 FL. SCALE

CERAMIC TILE FINISH (CT-06)

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

: 02 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED 5770

OFFICE LIFT

1025

25

1100

25

6980

1450

100

25

1100

25 100

GL-02

8FL-21FL OFFICE LIFT / PLAN SCALE

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1:50

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

CH.+2600MM.

:-

500

START POINT

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

SS-01 STAINLESS FINISH

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED

LEVEL INDICATOR AS BECA SPEC

CERAMIC TILE FINISH (CT-06)

Consultant 2 Discipline

:-

GL-02

2600

Consultant 3 Discipline

:-

SS-01 WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED CT-06 CERAMIC TILES FINISH

GL-02 GLASS COATED FINISH

Consultant 1 Discipline

2050

:12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

Other Party 2 Responsibility

CALL BUTTON AS BECA SPEC

::-

50

2 MM. THK. STAINLESS STEEL KICK PLATE FFL.+00MM.

::Other Party 1 Responsibility

1025

25

1100

25 80

1470

287

25

1100

25 80

::-

815

5770

6980

::Client 01 -

::-

ELEVATION SCALE

1:50

::Project START POINT

800

CH.+2600MM.

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED SS-01

LEVEL INDICATOR AS BECA SPEC

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

THE LORD RAMA 9

GL-02 GLASS COATED FINISH

LEVEL INDICATOR AS BECA SPEC CERAMIC TILE FINISH (CT-06)

2800

GL-02 GL-02 GLASS COATED FINISH

CT-06 CERAMIC TILES FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

1950

GL-02 GLASS COATED FINISH

Drawing title 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

OFFICE LIFT DETAIL PLAN , ELEVATION LEVEL 8-21

CALL BUTTON AS BECA SPEC

2 MM. THK. STAINLESS STEEL KICK PLATE

Date generated

50

-

มัณฑนากร

: WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

LIFT

:

INTERIOR DESIGNER :

795

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

FFL.+00MM.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale 825

25

1100

25

1005

2570

875 12475

25

1100

25

1550

25

1100

25

1050

1:50 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4003

A

Status 02 -

ELEVATION SCALE

1:50

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright

5

6

7

8

9

10

OFFICE LIFT 22FL

11 8500

8500

8500

8500

8500

51000

8500

1000

A B

C2

C2

C2

C2

C2

C2

C2

ID-TYP-5401

2

3

AREA FOR RENT (OFFICE)

AREA FOR RENT (OFFICE)

AREA FOR RENT (OFFICE)

178 sq.m.

159 sq.m.

295 sq.m.

-

1

C2

8500

ID-TYP-4217

FEMALE

MALE

MALE

FEMALE

AHU.

JO-02 ID-TYP-7002

C2

MEP Unit

C

NOT IN ID SCOPE

C2

MALE

MEP Center

FHC.

RECYCLE BIN HALL

NOT IN ID SCOPE

8500

27500

DN

LIFT LOBBY

FEMALE

NOT IN ID SCOPE

LIFT ID-TYP-4006

UP

C2

MEP Unit

UP

DN -

ID-TYP-4224

FEMALE

NOT IN ID SCOPE

MEP Unit

MEP Center

C2

MALE

MEP Unit

D C2 FEMALE

MALE

MALE

FEMALE

AHU.

5

6

AREA FOR RENT (OFFICE)

AREA FOR RENT (OFFICE)

162 sq.m.

301 sq.m.

8500

4 AREA FOR RENT (OFFICE) 178 sq.m.

-

ID-TYP-4216

© THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

C2 ID-TYP-5401

C2

C2

C2

C2

C2

C2

OWNERS : เจ้าของ

C2

1000

E F

825

25

1100

25

100

1450

5800

25

1100

100 25

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

725

5500

1450

GL-02

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

01

A -

CERAMIC TILE FINISH (CT-06)

FURNITURE LAYOUT PLAN 22 FL. SCALE

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

02 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED 5800

5500 825

OFFICE LIFT

25

1100

25

1450

100

:

1450 25

1100

25 100

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : INTERIOR DESIGNER :

725 WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

GL-02

Key Plan

LIFT -

22FL OFFICE LIFT / PLAN SCALE

1:50

CH.+2600MM.

500

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED

START POINT

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

Consultant 3 Discipline

LEVEL INDICATOR AS BECA SPEC

:-

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

2600

Consultant 2 Discipline

:-

GL-02

CT-06 CERAMIC TILES FINISH

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

CT-06 CERAMIC TILES FINISH

SS-01

LEVEL INDICATOR AS BECA SPEC

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

2050

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

Consultant 1 Discipline

:12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

Other Party 2 Responsibility CALL BUTTON AS BECA SPEC

::-

2 MM. THK. STAINLESS STEEL KICK PLATE 50

CERAMIC TILE FINISH (CT-06)

FFL.+00MM.

::Other Party 1 Responsibility

825

25

1100

25 80

5800

1450

25

1100

5500

25 80

745

::-

1450

::Client 01 -

ELEVATION SCALE

::-

1:50

::Project

START POINT

800

CH.+2600MM.

CT-06 CERAMIC TILES FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

THE LORD RAMA 9

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED SS-01

LEVEL INDICATOR AS BECA SPEC

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

2800

GL-02

GL-02 GLASS COATED FINISH

CT-06 CERAMIC TILES FINISH

GL-02 GLASS COATED FINISH

1950

GL-02 GLASS COATED FINISH

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

Drawing title

CALL BUTTON AS BECA SPEC 2 MM. THK. STAINLESS STEEL KICK PLATE 50

CERAMIC TILE FINISH (CT-06) FFL.+00MM.

OFFICE LIFT DETAIL PLAN , ELEVATION LEVEL 22 Date generated

27/03/20 725 1450

100 25

1100

25

1550 5510

25

1100

25

835 5752

Approved

-

MF.

1:50 @ A2 sheet size Project number

-

Checked

-

Scale

7948 02

Drawn

35 mm. on original Drawing number

Revision

ID-TYP-4004

A

ELEVATION

Status

SCALE

FOR CONSTUCTION

1:50

MF. MF. MF. MF. MF. MF. App'd


Copyright

OFFICE LIFT 23FL-36FL 5

6

7

8

9

10

11

8500

8500

8500

51000

8500

8500

8500

1000

A C2

C2

C2

C2

C2

ID-TYP-5401

2 AREA FOR RENT (OFFICE)

1 AREA FOR RENT (OFFICE)

8500

C2

C2

C2

B

295 sq.m.

347 sq.m. -

ID-TYP-4231

JO-02 ID-TYP-7002

C2

FEMALE

MEP Unit

C C2

MEP Center

MALE

MALE FHC. RECYCLE BIN

C2

MEP Unit

8500

27500

MEP LIFT MACHINE ROOM Center NOT IN ID SCOPE

+ MEP Unit

FEMALE

C2

ID-TYP-4008

DN FEMALE

MEP Unit

MEP Center

MALE

D

LIFT LOBBY

NOT IN ID SCOPE

LIFT

FHC. UP

ID-TYP-4224

UP

DN

NOT IN ID SCOPE

-

FEMALE

CORRIDOR

C2

MALE

C2

MACHINE ROOM

CORRIDOR -ID-TYP-4231

8500

4 AREA FOR RENT (OFFICE)

3 AREA FOR RENT (OFFICE)

301 sq.m.

281 sq.m.

C2

C2

C2

C2

C2

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

C2

1000

C2

NOTES

OWNERS : เจ้าของ

ID-TYP-5401

C2

E

© THE BEAUMONT PARTNERSHIP 2009

F

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

A -

FURNITURE LAYOUT PLAN 23 FL. SCALE

925

25

1100

25

100

1450

25

1100

100 25

725

5600

1:500

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED

1452

GL-02

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

: 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

CERAMIC TILE FINISH (CT-06)

OFFICE LIFT

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

02 12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

25

1100

25

100

Key Plan

1452

5600 925

1450

25

1100

25 100

ภูมิสถาปนิก

:

725 WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED GL-02

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:-

23FL-36FL OFFICE LIFT / PLAN SCALE

1:50

Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

200

::::-

800

CH.+2600MM.

CT-06 CERAMIC TILES FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

GL-02 GLASS COATED FINISH

SS-01 STAINLESS FINISH

WALL ELEVATOR: 10 MM. THK. MDF. BOARD STAINLESS FINISH AS SCHEDULED

GL-02 GLASS COATED FINISH

SS-01

LEVEL INDICATOR AS BECA SPEC

LEVEL INDICATOR AS BECA SPEC

WALL ELEVATOR: 10 MM. THK. MDF. BOARD GLASS COATED FINISH AS SCHEDULED GL-02

Other Party 1 Responsibility

::::-

2600

Client GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

GL-02 GLASS COATED FINISH

1952

-

12 MM. THK. CLEAR TEMPERED GLASS AS SCHEDULED

CALL BUTTON AS BECA SPEC

::::Project

2 MM. THK. STAINLESS STEEL KICK PLATE 48

LIFT

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

THE LORD RAMA 9

FFL.+00MM.

825

25

1100

25

1550

25

1100

25

925

5600

02 -

ELEVATION SCALE

Drawing title

1:50

OFFICE LIFT DETAIL PLAN , ELEVATION LEVEL 23-36 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4005

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1560 1360

CL

100

80

100

1260

05

CL

OWNERS : เจ้าของ

L1

06

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

80

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

START POINT

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

9MM. GYPSUM BOARD PAINTED FINISHED IN WHITE COLOR

01 -

LAY-OUT PLAN

02

SCALE

1:25

-

FLOOR FINISHES PLAN

03

SCALE

1:25

-

ภูมิสถาปนิก

:

Key Plan

REFLECTED CEILING PLAN SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

CONTROL PANEL CONFIRM BY OWNER

:-

70 50

2600

2600

Other Party 2 Responsibility

2600

70

::-

50

::Other Party 1 Responsibility

2 MM. THK. STAINLESS STEEL AS SCHEDULED

150

2 MM. THK. STAINLESS STEEL AS SCHEDULED

150

150

2 MM. THK. STAINLESS STEEL AS SCHEDULED

::::-

6 MM. THK. MIRROR AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

900

6 MM. THK. MIRROR AS SCHEDULED

900

Client

900

1560

04

6 MM. THK. TINT MIRROR AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

::::Project

THE LORD RAMA 9 20 300

20 920

20

20 250

300

920

20 250

300

1460

1560

20 920

300

1560

Drawing title

04 -

ELEVATION SCALE

05 1:25

-

ELEVATION SCALE

04 1:25

-

ELEVATION SCALE

1:25

TYPICAL LIFT INTERIOR Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4006

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1560 1360

CL

100

80

100

1260

05

CT-03

06

OWNERS : เจ้าของ

CL

CERAMIC TILE FINISH

:

L1

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

80

วิศวกรงานระบบ

: START POINT

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

9MM. GYPSUM BOARD PAINTED FINISHED IN WHITE COLOR

01 -

LAY-OUT PLAN

02

SCALE

1:25

-

FLOOR FINISHES PLAN

03

SCALE

1:25

-

ภูมิสถาปนิก

:

Key Plan

REFLECTED CEILING PLAN SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

70 50

2600

2600

CONTROL PANEL CONFIRM BY OWNER

2600

:Other Party 2 Responsibility

::-

70

::-

50

Other Party 1 Responsibility

2 MM. THK. STAINLESS STEEL AS SCHEDULED

150

2 MM. THK. STAINLESS STEEL AS SCHEDULED

150

150

2 MM. THK. STAINLESS STEEL AS SCHEDULED

::::-

6 MM. THK. MIRROR AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

900

6 MM. THK. MIRROR AS SCHEDULED

900

Client

900

1560

04

6 MM. THK. TINT MIRROR AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

2 MM. THK. STAINLESS STEEL AS SCHEDULED

::::Project

THE LORD RAMA 9 20 300

20

20

20 920

250

300

920

20 250

300

1460

1560

20 920

300

1560

Drawing title

04 -

ELEVATION SCALE

05 1:25

-

ELEVATION SCALE

04 1:25

-

ELEVATION SCALE

1:25

TYPICAL LIFT INTERIOR PLAN , ELEVATION Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4007

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES -

3

4

5

6

7

8

ID-TYP-4001

9

แนวเขตที่ดิน

TYPICAL RAMP DETAIL

8500

8500

8500

8500

8500

85000

แนวเขตที่ดิน

8500

8500

8500

2 8500

1

STO. FEMALE

1000

A B

C2 C1

FEMALE

C2

C1

191 sq.m.

111 sq.m.

198 sq.m.

RETAIL AREA 1

RETAIL AREA 2

RETAIL AREA 3

8500

NOT IN ID SCOPE UP

FHC.

RAMP C1

C2

C3

ID-TYP-5402

ID-TYP-5403

CORRIDOR

JO-02

ID-TYP-5404

ID-TYP-7002

UP

RECYCLE BIN

1 2

STEP UP 1.50 m DETAIL

UP

ID-TYP-5401

C

3 4

C1

C1

C3

7 8

STAIR

DISABLED LIFT

6

C2

DASHLINE OF 2 FL. FLOOR LEVEL

5

C1

9

ID-TYP-4001

Control Door

LIFT HALL 1

2

3

4

5

6

7

8

9

8500

+1.50 m LANDING HALL

UP DN

6 5 4 3

LIFT

2

ID-TYP-4001

D

1

แนวเขตที่ดิน

7

8

9

1

PLAZA

C1

C1

C1

C1

C2

C3

CORRIDOR

ID-TYP-4101

FHC.

2

8500

3000

UP +1.20 m

NOT IN ID SCOPE

136 sq.m.

108 sq.m.

106 sq.m.

RETAIL AREA 4A

RETAIL AREA 5

RETAIL AREA 6 1200

+0.40 m

57 sq.m. RETAIL AREA 4B

UP

UP

27500

DN UP

NOT IN ID SCOPE SERVICE ROOM

150 sq.m.

116 sq.m.

+1.35 m

RETAIL AREA 8

1000

C1

C1 +1.50 m

1800

3

F

SLOPE 1:8

SLOPE 1:8

C1

RAILING: STAINLESS STEEL Ø50 MM.

SLOPE 1:8

SLOPE 1:8

1400

RETAIL AREA 7

E

+0.80 m

C2

C2

MEP ROOM

OWNERS : เจ้าของ

1200

NOT20 IN ID SCOPE 1200

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1200

:

2200

ARCHITECTS : สถาปนิก

4

แนวเขตที่ดิน

REMARK :

:

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

:

5

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

6

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

7

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

8

Key Plan

9

UP 9

9

CERAMIC TILE FINISH FL-01

8

8

7

7

6

6

5

5

4

4

3

3

2

2

1

1

01

Description Rev No. Consultant 4 Discipline

Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::-

DISABLED LIFT

Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

02 -

TYPICAL LAMP DETAIL ELEVATION -

LAYOUT STEP PLAN SCALE

Date generated

1:25

27/03/20

Drawn

Checked

-

-

Approved

Scale

02

1:25 @ A2 sheet size Project number

7948 Status

35 mm. on original Drawing number

ID-TYP-4101

Revision

App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

8500

8500

8500

85000

แนวเขตที่ดิน

8500

8500

แนวเขตที่ดิน 8500

STO.

1000

FEMALE

C2 C1

FEMALE

C2

C1

8500

NOT IN ID SCOPE UP

FHC.

CORRIDOR UP

RECYCLE BIN 1 2

STEP UP 1.50 m DETAIL

UP

3 4

C1

C1

C3

DISABLED LIFT

6

C2

7

DASHLINE OF 2 FL. FLOOR LEVEL

5

C1

8 9

+1.50 m LANDING LIFT HALL 1

2

3

4

5

6

7

8

9

8500

Control Door

HALL

UP

27500

DN UP

NOT IN ID SCOPE SERVICE ROOM UP DN

1

2

3

4

5

6

แนวเขตที่ดิน

7

8

9

PLAZA

C1

C1

C1

C1

C2

C3

CORRIDOR FHC.

8500

3000

UP +1.20 m

1200

+0.40 m

NOT IN ID SCOPE

+1.35 m

1000

SLOPE 1:8

SLOPE 1:8

C1

C1 +1.50 m

RAILING: STAINLESS STEEL Ø50 MM.

1400

SLOPE 1:8

SLOPE 1:8

C1

15

1800

C2

MEP ROOM

100

1200

NOT IN ID SCOPE 1200

1200

2200

OWNERS : เจ้าของ

H.+1000MM.

+0.80 m

C2

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

:

ARCHITECTS : สถาปนิก

HANDRAIL STANLESS STEEL HAIRLINE

แนวเขตที่ดิน

REMARK :

:

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

FURNITURE LAYOUT PLAN BF 1

A

SCALE

-

10 MM. THK. TEMPERED CLEAR GLASS

900

1000

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

1:500

MECHANICAL ENGINEERS :

FLOOR FINISH AS SCHEDULED

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

FFL.+00MM.

120

วิศวกรงานระบบ

:

INTERIOR DESIGNER :

มัณฑนากร

: 138

VERIES

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

SCREW FASTENED WITH AN CHORDS ALUMINUM PROFILE

03

SECTION DETAIL 3 SCALE

-

1:20

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

03

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:RAILING: STAINLESS STEEL Ø50 MM.

Consultant 3 Discipline

RAILING: STAINLESS STEEL Ø50 MM.

9@295=2660

:Consultant 2 Discipline

3340 900

:-

900

Consultant 1 Discipline

900 900

900

:-

900

RAILING: STAINLESS STEEL Ø50 MM.

10 MM. THK. TEMPERED CLEAR GLASS

1000

900

10 MM. THK. TEMPERED CLEAR GLASS

1000

Other Party 2 Responsibility

RAILING: STAINLESS STEEL Ø50 MM.

7

4 3

CERAMIC TILE FINISH FL-02

2

1

9@154=1388

1000

1500

9@154=1388

2

::-

5

4

ALUMINUM PROFILE

::-

6

5 3

Client

7

6

Other Party 1 Responsibility

::-

8

1000

112

9

8

::-

::-

LANDING +1500

9

::-

Project

THE LORD RAMA 9 ALUMINUM PROFILE

1

BASEMENT FLOOR +00 Drawing title

START POINT

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

01 -

ELEVATION 1 SCALE

1:25

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4102

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

8500

8500

8500

85000

แนวเขตที่ดิน

8500

8500

แนวเขตที่ดิน 8500

STO.

1000

FEMALE

C2 C1

FEMALE

C2

C1

8500

NOT IN ID SCOPE UP

FHC.

CORRIDOR

2

UP

1

STEP UP 1.50 m DETAIL

UP

RECYCLE BIN

3 4

C1

C1

C3

DISABLED LIFT

6

C2

7

DASHLINE OF 2 FL. FLOOR LEVEL

5

C1

8 9

Control Door

LIFT HALL 1

2

3

4

5

6

7

8

9

8500

+1.50 m LANDING HALL

PLAZA

1

2

3

4

5

6

แนวเขตที่ดิน

7

8

9

UP DN

UP

27500

DN UP

NOT IN ID SCOPE SERVICE ROOM

C1

C1

C1

C1

C2

C3

CORRIDOR FHC.

8500

3000

UP +1.20 m

1200

+0.40 m

NOT IN ID SCOPE

+1.35 m

1000

SLOPE 1:8

SLOPE 1:8

C1

C1 +1.50 m

RAILING: STAINLESS STEEL Ø50 MM.

1400

SLOPE 1:8

SLOPE 1:8

C1

15

1800

H.+1000MM.

+0.80 m

C2

C2

MEP ROOM

100

1200

1200

NOT IN ID SCOPE 1200

2200

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

HANDRAIL STANLESS STEEL HAIRLINE

แนวเขตที่ดิน

:

REMARK :

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

-

FURNITURE LAYOUT PLAN BF 1 SCALE

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

10 MM. THK. TEMPERED CLEAR GLASS

900

A

1000

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

1:500

MECHANICAL ENGINEERS :

FLOOR FINISH AS SCHEDULED

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

120

FFL.+00MM.

:

INTERIOR DESIGNER :

มัณฑนากร

:

138

VERIES

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

SCREW FASTENED WITH AN CHORDS ALUMINUM PROFILE

SECTION DETAIL 3

03

SCALE

-

1:20

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

Elevator shaft 03 10 MM. THK. TEMPERED CLEAR GLASS

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

RAILING: STAINLESS STEEL Ø50 MM.

:Consultant 2 Discipline

9@295=2660

2740 2740

900

900

:-

900

100

Consultant 1 Discipline

:::-

1000

1000

900

Other Party 2 Responsibility

RAILING: STAINLESS STEEL Ø50 MM.

9

::-

8

Client

7

::-

5 4 1000

3 2

9@154=1388

6

CERAMIC TILE FINISH FL-02

Other Party 1 Responsibility

::-

LANDING +1500

Elevator shaft

::-

::Project

10 MM. THK. TEMPERED CLEAR GLASS

THE LORD RAMA 9

ALUMINUM PROFILE

1 BASEMENT FLOOR +00

BASEMENT FLOOR +00

START POINT

Drawing title

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

02 -

ELEVATION 2 SCALE

1:25

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4103

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP DN

shaft

R4850

R5 250

UP

BEN

8500

CH

BEN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP UP DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3

แนวเขตที่ดิน

64

9

R6766

CORRIDOR AREA

UP R1

HAND-RAIL

391.28 sq.m.

UP

R21

10

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

A -

CL.

FURNITURE LAYOUT PLAN BF 1 SCALE

1:500

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

CL.

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

8500

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

3319

5781

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

DASHLINE OF 2 FL. FLOOR LEVEL

ภูมิสถาปนิก

:

Key Plan

H

700

C BEN

CL.

C1 R15 0

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

C1

0 R16

R

A

50

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

60 00

Consultant 3 Discipline

TERRACE

5362

:R5

:Consultant 1 Discipline

R4850

BE

40 0

NC H

Consultant 2 Discipline

:Other Party 2 Responsibility

R5 25 0

8500

WHITE TERRAZZO FINISH FL-06

::::Other Party 1 Responsibility

R150

UP

WHITE TERRAZZO FINISH FL-06

25 R4

::-

R300

Client

R654

WALK WAY LANDING

B

FFL +1525 SSL +1475 FF : 00

WHITE TERRAZZO FINISH FL-06

UP

FL-06

FL-06

FL-06

FL-06

1:50

R4860

C1

TYPICAL LAMP DETAIL ELEVATION -

R1875

0

R2050

Drawing title

0 R54

LAYOUT PLAN STAIR SCALE

FL-06

R544

HAND-RAIL

-

THE LORD RAMA 9 WHITE TERRAZZO FINISH FL-06

0 R600

CL.

A

::-

R879

UP

UP WHITE TERRAZZO FINISH FL-06

::-

Width front walk way = 3.00 m for

Project

3043

FFL +0 600 SSL +0 550 FF : 00

::-

BOUNDARY RETAIL AREA LINE

HAND-RAIL

Date generated

27/03/20

C1

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4107

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP DN

shaft

R4850

R5 250

UP

BEN

8500

CH

BEN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP UP DETAIL

UP

UP BIN RECYCLE

R544

C1

00

15 TOP FINISH LEVEL

5

R54

R2050

R6000

10 ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

C1

C2

R5000

BENCH

UP

10 MM.THK. TEMPERED CLEAR GLASS

C3

WHITE TERRAZZO AS SCHEDULE FINISH

C L

FLOOR FINISH LEVEL

HANDRAIL STAINLESS STEEL HAIRLINE

R5566 ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

R6761

UP R6000 0 R385

CEMENT SCREED

DN

UP

DN

UP

EXTERIOR CONCRETE SLAB

108

HALL

8500

UP

27500

45 (TBC)

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

10 MM.THK. TEMPERED CLEAR GLASS

100

C1

HAND-RAIL

198

R1875

HAND-RAIL

120 (TBC)

R4860

10

FD.

R425

475

3 HAND-RAIL

CORRIDOR AREA

UP R1

64

9

R6766

391.28 sq.m.

UP

R21

10 1000

แนวเขตที่ดิน

HAND-RAIL

FD. WHITE TERRAZZO AS SCHEDULE FINISH

0

900

R155

809 50 30

UP

802

TOP OF SEATING LEVEL

CEMENT SCREED

C1

C1

C1

C2

UP

C3

CORRIDOR

EXTERIOR CONCRETE SLAB

UP

450

FHC.

UP

UP

8500

UP

WHITE TERRAZZO AS SCHEDULE FINISH

FLOOR FINISH LEVEL

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

20 50 30

CEMENT SCREED 120 (TBC)

shaft

DN

10 MM.THK. TEMPERED CLEAR GLASS

10

MEP

WHITE TERRAZZO AS SCHEDULE FINISH

FLOOR FINISH LEVEL

CEMENT SCREED

FLOOR STRUCTURE LEVEL

EXTERIOR CONCRETE SLAB

MEP 45 (TBC)

1000

EXTERIOR CONCRETE SLAB

OWNERS : เจ้าของ

STAFF OFFICE

02

TYPICAL BENCH DETAIL SCALE

02

1:2

-

TYPICAL GLASS BALUSTRADE DETAIL SCALE

1:2

User 0

-

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

:

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

STAIR LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

:

INTERIOR DESIGNER :

6741

GROUND LEVEL

475

WHITE TERRAZZO FINISH

900 1000

WHITE TERRAZZO FINISH

6

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

100

100

FFL +1525 SSL +1475 FF : 00

100

LANDING 100

WHITE TERRAZZO FINISH FL-06 1

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

450

925

Key Plan

8

FL-06

925 1850

12@154.16=1850

WHITE TERRAZZO FINISH

ภูมิสถาปนิก

:

FL-06

900 1000

COLUMN

LANDSCAPE DESIGNER :

FFL +2 450 SSL +2 400 FF : 00 FL-06

HANDRAIL STAINLESS STEEL HAIRLINE

มัณฑนากร

:

5932

809

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

GL-01 10 MM.THK. TEMPERED CLEAR GLASS

:-

+0 600

Consultant 2 Discipline

:Consultant 1 Discipline

HANDRAIL STAINLESS STEEL HAIRLINE

WALK WAY A -

FFL +0 600 SSL +0 550 FF : 00

ELEVATION A SCALE

WALL W/ PAINT AS SCHEDULE FINISH

1:35

FLUSH LIGHT AS SCHEDULE FINISH

WALL W/ PAINT AS SCHEDULE FINISH

GROUND LEVEL 2440

FFL +2 450 SSL +2 400 FF : 00

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

3

253

225

900 +0 600

6

9

LANDING FFL +1525 SSL +1475 FF : 00

900

WHITE TERRAZZO FINISH

8 7

11

::::Client

::::Project

THE LORD RAMA 9

4

300

FFL +0 600 SSL +0 550 FF : 00 154

925

WALK WAY

10

300 5

12

FL-06

900

925

WHITE TERRAZZO FINISH

200 1850

12@154.16=1850

FL-06

WHITE TERRAZZO FINISH

900

HANDRAIL STAINLESS STEEL HAIRLINE

FL-06

3 2

200

1 Drawing title

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

B -

ELEVATION B SCALE

1:35

Drawn

Checked

Approved

-

-

MF.

Scale

1:35 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4108

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP DN

shaft

R4850

R5 250

UP

BEN

8500

CH

BEN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP DOWN DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3

แนวเขตที่ดิน

64

9

R6766

CORRIDOR AREA

UP R1

HAND-RAIL

391.28 sq.m.

UP

R21

10

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

CL. A -

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

12661

FURNITURE LAYOUT PLAN BF 1

3238 1:500

SCALE

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

CL.

:

8500

8@300=880

8@300=2336

2108

MECHANICAL ENGINEERS :

6@300=1800

2901

1553

วิศวกรงานระบบ

:

3@300=1083

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

UP

ภูมิสถาปนิก

:

R879

UP

Key Plan

UP R544

HAND-RAIL

R4860

R1875

C1

00 R54

603

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

C1

HAND-RAIL

DARK GRAY TERRAZZO FINISH FL-07

LANDING

UP UP

H BENC

100

3125

A

R5000

CL.

R2050

0 R600

FFL -1836 SSL -1886 FF : 00

:Consultant 3 Discipline

5566

:-

R

Consultant 2 Discipline

R6761

:-

50 R38

Other Party 2 Responsibility

::-

753

8501

:Consultant 1 Discipline

DARK GRAY TERRAZZO FINISH FL-06

R6000

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

::-

3412

R2

00

::-

R425

Client

HAND-RAIL

R676

6

DARK GRAY TERRAZZO FINISH FL-06

B

::-

53

FFL -270 SSL -320 FF : 00

FFL +0 600 SSL +0 550 FF : 00

Other Party 1 Responsibility

R14

0 00 R3

LANDING

WALK WAY

R7

75

R1500

DARK GRAY TERRAZZO FINISH FL-06

UP 49 HAND-RAIL

::Project

UP

R

21 LANDING 10

6 R1

::-

FFL -3054 SSL -3104 FF : 00

THE LORD RAMA 9

BASEMENT FFL -3 750 SSL -3 700 FF : 00

50

607

R15

Drawing title

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

C1 A -

LAYOUT PLAN STAIR SCALE

1:25

C1

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4109

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP

CH

BEN R5 250

BEN

UP

8500

shaft

R4850

DN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP DOWN DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3 HAND-RAIL

CORRIDOR AREA

UP R1

64

9

R6766

391.28 sq.m.

UP

R21

10

แนวเขตที่ดิน

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

FL-06 WHITE TERRAZZO FINISH

973

2027

628

2971

2234

FL-06 WHITE TERRAZZO FINISH

GROUND LEVEL LED SCREEN SIGNAGE SCOPE

FL-06

5

10 MM.THK TEMPERED CLEAR GLASS

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:CEILING LEVEL

850

1000

500

870

WHITE TERRAZZO FINISH

Consultant 3 Discipline

:Consultant 2 Discipline

:HANDRAIL STAINLESS STEEL HAIRLINE

WHITE TERRAZZO FINISH

1566

586

FL-06

Consultant 1 Discipline

:Other Party 2 Responsibility

10 MM.THK TEMPERED CLEAR GLASS

::-

15

Other Party 1 Responsibility

16 17

LANDING 19 20

900

18

FL-06

FFL -3054 SSL -3104 FF : 00 21

WHITE TERRAZZO FINISH

BASEMENT

3@174=696

22 23

450

24

5625

2214

::-

2804

14

500

900

FFL -270 SSL -320 FF : 00

1000

LANDING

6@174=1218

25@174=4350

FFL +2 450 SSL +2 400 FF : 00

3500

500

FFL +0 600 SSL +0 550 FF : 00

1586

WALK WAY

1000

START POINT

6@300=2028

1840

FFL -3 750 SSL -3 800 FF : 00

::::Client

::::Project

THE LORD RAMA 9

25

3@300=984

8500 Drawing title

A -

ELEVATION A SCALE

1:40

CL.

CL.

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:40 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4110

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP

CH

BEN R5 250

BEN

UP

8500

shaft

R4850

DN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP DOWN DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3 HAND-RAIL

CORRIDOR AREA

UP R1

64

9

R6766

391.28 sq.m.

UP

R21

10

แนวเขตที่ดิน

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

WALK WAY FFL +0 600 SSL +0 550 FF : 00

1597

3387

2417

3382

START POINT

FL-06

GROUND LEVEL

WHITE TERRAZZO FINISH FL-06 1

LED SCREEN SIGNAGE SCOPE

FL-06 2 FL-06 3

FFL +2 450 SSL +2 400 FF : 00

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

FL-06 WHITE TERRAZZO FINISH

FL-06 4

CEILING LEVEL FL-06

LANDING FFL -270 SSL -320 FF : 00

Consultant 3 Discipline

:Consultant 2 Discipline

:FL-06 WHITE TERRAZZO FINISH

Consultant 1 Discipline

:-

13 14

FL-06

6@174=1218

15

FL-06 16 FL-06 17

LANDING FFL -1836 SSL -1886 FF : 00

FL-06 18 FL-06 19 FL-06

BASEMENT FFL -3 750 SSL -3 800 FF : 00

20 21

FL-06

3@174=696

FL-06

FL-06 24

LANDING 8@300=2417

3387

6@300=2028

::Other Party 1 Responsibility

FL-06 WHITE TERRAZZO FINISH

23

1597

Other Party 2 Responsibility

::-

22

5@300=1213

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

FL-06 FL-06 7 8 FL-06 9 FL-06 10 FL-06 11 FL-06 12 FL-06

4350

8@174=1566

6

2804

5

25@174=4350

1000

4@174=870

1213

FFL -3054 SSL -3104 FF : 00 1840

FL-06 25

::::Client

::::Project

THE LORD RAMA 9

3@300=982

11477

A -

ELEVATION B SCALE

1:40

CL.

CL.

Drawing title

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:40 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4111

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP DN

shaft

R4850

R5 250

UP

BEN

8500

CH

BEN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP UP DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3

64

9

R6766

CORRIDOR AREA

UP R1

HAND-RAIL

391.28 sq.m.

UP

R21

10

แนวเขตที่ดิน

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

10 MM.THK TEMPERED CLEAR GLASS

Key Plan

HANDRAIL STAINLESS STEEL HAIRLINE 10 MM.THK TEMPERED CLEAR GLASS

2212

HANDRAIL STAINLESS STEEL HAIRLINE

7

1000

1200

VARIES

100

1000

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

+0 600

FFL +2 450 SSL +2 400 FF : 00

LED SCREEN SIGNAGE SCOPE

1 2

1646

GROUND LEVEL

900

4

LANDING FFL -270 SSL -320 FF : 00

CEILING LEVEL 6

Consultant 2 Discipline

:Consultant 1 Discipline

::::-

FFL -1836 SSL -1886 FF : 00 175

13

WHITE TERRAZZO FINISH

900

12

6@174=1218

14

586

HANDRAIL STAINLESS STEEL HAIRLINE 10 MM.THK TEMPERED CLEAR GLASS

::::Client

::::-

3500

LANDING

FL-06

Other Party 1 Responsibility

1586

11

1000

10

2000

9

1825

8

8@174=1566

:-

Other Party 2 Responsibility

7

ALUMINUM PROFILE

Project

THE LORD RAMA 9

BASEMENT FFL -3 750 SSL -3 800 FF : 00 DASHED LINE SHOW STAIR STEPS

3@174=696

25@174=4350

Consultant 3 Discipline

:-

5335

3

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

1000

FFL +0 600 SSL +0 550 FF : 00

900

250 930

WALK WAY

1200

START POINT

900

6 24

1200

96

1200

0

254

Drawing title

TYPICAL LAMP DETAIL ELEVATION 5@300=1213

1597

8@300=2417

7015 12242

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:50 @ A2 sheet size

A -

LAYOUT PLAN STAIR SCALE

1:50

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4112

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

TYPICAL STEP DETAIL

NOTES -

3

4

6

7

8

ID-TYP-4001

9

แนวเขตที่ดิน

8500

8500

A

8500

85000

8500

8500

8500

แนวเขตที่ดิน

5 8500

2 8500

1

8500

STO. FEMALE

1000

A B

C2 C1

FEMALE

C2

C1

191 sq.m.

111 sq.m.

198 sq.m.

RETAIL AREA 1

RETAIL AREA 2

RETAIL AREA 3

8500

NOT IN ID SCOPE UP

FHC.

RAMP C1

C2

C3

ID-TYP-5402

ID-TYP-5403

CORRIDOR

JO-02

ID-TYP-5404

ID-TYP-7002

UP

RECYCLE BIN

1 2

UP

ID-TYP-5401

C

3 4

C1

C1

C3

7

DASHLINE OF 2 FL. FLOOR LEVEL

8

STAIR

DISABLED LIFT

6

C2

5

C1

9

ID-TYP-4001

Control Door

LIFT HALL 1

2

3

4

5

6

7

8

9

8500

+1.50 m LANDING HALL

UP

27500

DN UP

NOT IN ID SCOPE SERVICE ROOM UP DN

6 5 4 3

LIFT

2

ID-TYP-4001

D

1

แนวเขตที่ดิน

7

8

9

PLAZA

C1

C1

C1

C1

C2

C3

CORRIDOR

ID-TYP-4101

FHC.

8500

3000

3000

UP +1.20 m

NOT IN ID SCOPE

57 sq.m.

136 sq.m.

108 sq.m.

106 sq.m.

RETAIL AREA 4B

RETAIL AREA 4A

RETAIL AREA 5

RETAIL AREA 6 1200

+0.40 m

150 sq.m. RETAIL AREA 8

+1.35 m

1400

SLOPE 1:8

SLOPE 1:8

1000

C1

SLOPE 1:8

SLOPE 1:8

C1

F

C1 +1.50 m

RAILING: STAINLESS STEEL Ø50 MM.

116 sq.m. RETAIL AREA 7

E

1800

+0.80 m

C2

+1.20 m

C2

MEP ROOM

1200

NOT20 IN ID SCOPE 1200

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1200

OWNERS : เจ้าของ :

2200

ARCHITECTS : สถาปนิก :

แนวเขตที่ดิน

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

REMARK :

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

:

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

A -

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

FURNITURE LAYOUT PLAN BF 1

MECHANICAL ENGINEERS :

SCALE

:

1:500

วิศวกรงานระบบ

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

STEP UP 1.50 m DETAIL

ภูมิสถาปนิก

:

Key Plan

1200

LOADING DOCK

LANDSCAPE DESIGNER :

+0.40 m +1.35 m

2400

SLOPE 1:8

SLOPE 1:8

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

+0.80 m

Other Party 2 Responsibility

RAILING: STAINLESS STEEL Ø50 MM.

3200

:-

1200

SLOPE 1:8

SLOPE 1:8

+1.50 m

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

1100

-

LAYOUT STEP PLAN SCALE

1:25

Drawn

Checked

Approved

-

-

MF.

Scale

1100 2200

A

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

1:25 @ A2 sheet size

1200

1200

1200

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4113

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

แนวเขตที่ดิน

8500

8500

8500

8500

85000

8500

8500

8500

8500

แนวเขตที่ดิน 8500

STO.

1000

FEMALE

C2 C1

FEMALE

C2

C1

8500

NOT IN ID SCOPE UP

FHC.

CORRIDOR UP

RECYCLE BIN 1 2

UP

3 4

C1

C1

C3

7

DASHLINE OF 2 FL. FLOOR LEVEL

DISABLED LIFT

6

C2

5

C1

8 9

Control Door

LIFT HALL 1

2

3

4

5

6

7

8

9

8500

+1.50 m LANDING HALL

PLAZA

1

2

3

4

5

6

แนวเขตที่ดิน

7

8

9

UP DN

UP

27500

DN UP

NOT IN ID SCOPE SERVICE ROOM

C1

C1

C1

C1

C2

C3

CORRIDOR FHC.

8500

3000

UP +1.20 m

NOT IN ID SCOPE

1200

+0.40 m

+1.35 m

1000

SLOPE 1:8

SLOPE 1:8

C1

C1 +1.50 m

RAILING: STAINLESS STEEL Ø50 MM.

1400

SLOPE 1:8

SLOPE 1:8

C1

1800

OWNERS : เจ้าของ

+0.80 m

C2

C2

MEP ROOM

1200

1200

NOT IN ID SCOPE

:

1200

2200

ARCHITECTS : สถาปนิก :

แนวเขตที่ดิน

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

REMARK :

TBP NEED TO ADD STAIR LIGHTING IN THE SIDE WALLS ( Ref. ID-TYP-4116 ) DETAIL OF SIDEWALLS LIGHTING

:

ALL SPECIFICATION OF LIGHTING ITEMS WILL SPECIFY AND CONFIRM BY ( CWL ) LIGHTING DESIGNER

A -

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

FURNITURE LAYOUT PLAN BF 1

MECHANICAL ENGINEERS :

SCALE

:

1:500

วิศวกรงานระบบ

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

STEP UP 1.50 m DETAIL

LOADING DOCK

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

900

600

300

300

RAILING: STAINLESS STEEL Ø50 MM.

Consultant 3 Discipline

:Consultant 2 Discipline

:-

::-

1200

400

Other Party 2 Responsibility

::Other Party 1 Responsibility

::-

400

600

Consultant 1 Discipline

:-

400

600

FFL.+1200

200

900

ภูมิสถาปนิก

:

Key Plan

RAILING: STAINLESS STEEL Ø50 MM.

850

LANDSCAPE DESIGNER :

::-

FFL.+0.000

Client

::-

1500

2850

1200

::Project

5550

THE LORD RAMA 9

Drawing title

A -

TYPICAL LAMP DETAIL ELEVATION -

ELEVATION A SCALE

1:25

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4114

A

Status

RAILING: STAINLESS STEEL Ø50 MM.

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP

CH

BEN R5 250

BEN

UP

8500

shaft

R4850

DN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP UP DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

R1875

FD. HAND-RAIL

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

CODE: L5

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3

แนวเขตที่ดิน

64

9

HAND-RAIL

DESCRIPTION: FLUSH LIGHT

R6766

CORRIDOR AREA

UP R1

391.28 sq.m.

UP

R21

10

HAND-RAIL

FD. 0

SPECIFICATION: LED LUMINARIES

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

PRODUCT NO: 72-205-CA02-002900Y DN

8500

UP

MEP shaft

MEP

1000

COLOR: BLACK POWER COATED

STAFF OFFICE

OWNERS : เจ้าของ

LAMP: SMD LED 2.1W (700mA)

User 0

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

: -

ARCHITECTS : สถาปนิก

SIZE: 76x76x45 MM.

12

แนวเขตที่ดิน

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

SUPPLIER: Light Style (Thailand) Co.,Ltd 1050 Soi Sukhumvit 66/1 Bangjak, Phrakanong, Bangkok 10260 Tel. : 02-5389900 Fax. : 02-538-0202

1:500

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

K.Sasithorn Simsuan (Jan) Mobile: 085-484-4947 E-mail : Sasithorn.s@lightstyle.co.th

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

REMARK: MORE DETAIL TO BE COORDINATED WITH SUPPLIERS

ภูมิสถาปนิก

:

Key Plan

WHITE TERRAZZO AS SCHEDULE FINISH

SILICON JOINT

1

CL

76

6 MM. THK. STAINLESS STEEL SHEET VARIES

5 MM. THK. ANTI-SLIP GROOVES

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

5 MM. THK. ANTI-SLIP GROOVES

101010 2 30 20

2

101010 2

2

30 20 10

:-

CL

:Consultant 1 Discipline

101010 2

:-

30 20

Other Party 2 Responsibility

174

::::-

30 146

Other Party 1 Responsibility

::::-

CEMENT SCREED

CEMENT SCREED

:Consultant 2 Discipline

2

101010 2 2

76

174

174

76 324

174

VARIES

124

174 124

174

WHITE TERRAZZO AS SCHEDULE FINISH 324

30 20

6 MM. THK. STAINLESS STEEL SHEET

CL

FLUSH LIGHT REFER TO SPECIFICATION SCHEDULE

WHITE TERRAZZO AS SCHEDULE FINISH 50

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 3 Discipline

SILICON JOINT

VARIES

FLUSH LIGHT REFER TO SPECIFICATION SCHEDULE

76

WHITE TERRAZZO AS SCHEDULE FINISH

10

20 30 10

10

30 20 10

150 50

100

10

20 30 10

150 50

CL

PLANTER TOP TO BE ALIGHT WITH METAL LINE

30 20

14

Client

EXTERIOR CONCRETE SLAB

::-

EXTERIOR CONCRETE SLAB

::Project

THE LORD RAMA 9

Drawing title

01 -

TYPICAL PLANTER DETAIL SCALE

1:5

02 -

TYPICAL STAIR DETAIL SCALE

1:5

03 -

TYPICAL STAIR DETAIL

TYPICAL LAMP DETAIL ELEVATION -

SCALE

Date generated

1:5

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4116

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL STEP DETAIL

8500

8500

8500

FEMALE

A-1637

A-1637

8500

8500

85000 8500

8500

8500

แนวเขตที่ดิน แนวเขตที่ดิน

A-1637

SPIRIT HOUSE NC

H

1000

BE

BEN

CH

DISABLE

C2 C1

C1

C2

MALE

C1

R15 00 A-1637 TERRACE

0

0

CH

MEP DN

shaft

R4850

R5 250

UP

BEN

8500

CH

BEN

R5 400

A-1637

00

A-1637

R165 R6

R150

25 R4

UP

BOUNDARY AREA LINE RETAIL

FHC.

R654

R300

VOID

R879

UP

UP

CORRIDOR

STEP UP DETAIL

UP

UP BIN RECYCLE

R544

C1

00

R4860

R54

R2050

R6000

HAND-RAIL

R1875

FD.

C1

C1

C2

HAND-RAIL

R5000

BENCH

UP

R5566 R6761

UP R6000

DN

UP

UP

LIFT HALL

HALL

0 R20

0

R145

R3

R77 5

R1500

00

DN

HALL

8500

UP

27500

0 R385

UP

C3

R425

3 HAND-RAIL

CORRIDOR AREA

แนวเขตที่ดิน

UP R1

64

9

R6766

391.28 sq.m.

UP

R21

10

HAND-RAIL

FD. 0

UP

R155

C1

C1

C1

C2

C3

CORRIDOR

UP

UP

FHC.

UP

UP

DN

8500

UP

MEP shaft

1000

MEP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

User 0

STAFF OFFICE

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

12 -

แนวเขตที่ดิน

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN BF 1 SCALE

:

MECHANICAL ENGINEERS :

CL

1:500

วิศวกรงานระบบ

:

TOP FINISH LEVEL

15

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

5

10

100

10

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

10 MM.THK. TEMPERED CLEAR GLASS

198

WHITE TERRAZZO AS SCHEDULE FINISH

120 (TBC)

10 MM.THK. TEMPERED CLEAR GLASS

FLOOR FINISH LEVEL

Key Plan

HANDRAIL STAINLESS STEEL HAIRLINE

CEMENT SCREED

EXTERIOR CONCRETE SLAB 108

45 (TBC)

475

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:1000

Consultant 3 Discipline

Consultant 2 Discipline

900

WHITE TERRAZZO AS SCHEDULE FINISH 809

50 30

:Consultant 1 Discipline

:-

802

TOP OF SEATING LEVEL

:-

Other Party 2 Responsibility

CEMENT SCREED

::::Other Party 1 Responsibility

EXTERIOR CONCRETE SLAB

::::-

450

Client

::::Project

10 MM.THK. TEMPERED CLEAR GLASS

10

WHITE TERRAZZO AS SCHEDULE FINISH

50 30 20

FLOOR STRUCTURE LEVEL

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

CEMENT SCREED

120 (TBC)

FLOOR FINISH LEVEL

FLOOR FINISH LEVEL

THE LORD RAMA 9

WHITE TERRAZZO AS SCHEDULE FINISH

CEMENT SCREED Drawing title

EXTERIOR CONCRETE SLAB 45 (TBC)

EXTERIOR CONCRETE SLAB

TYPICAL LAMP DETAIL ELEVATION Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

04 -

TYPICAL BENCH DETAIL SCALE

05 1:5

-

TYPICAL GLASS BALUSTRADE DETAIL

7948

SCALE

Status

1:5

35 mm. on original Drawing number

Revision

ID-TYP-4117

A

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 6530 ON SITE 2679 639

120

700

700

3731

639

933

933

933

ST-01

CT-05

SW-03A

SW-03A

TOP.+1200

ST-01

CT-05

TOP.+1200

CT-05

200

100

100

100

933

ST-01 ST-01

SW-07 ST-01 SW-04

CT-05

PE LO

02

CT-05

0 20 1:

SW-03A

CT-05

SW-03A

SW-06

S

SW-06

SW-06

OWNERS : เจ้าของ :

CT-05

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

SW-06

:

ID-TYP-4201

SW-04

ST-01

SW-04

1500

1380

SW-04

SW-04

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

02

:

CHECK 3130 ON SITE

ID-TYP-4202

CT-05

CT-05

CT-05

01

PL-05

PL-05

PL-05

MALE TOILET 1030

PL-05

ID-TYP-4202

SW-10

08

CT-05

PL-05

SL

FL-02

ID-TYP-4205

07

O

PE

FFL.+0000

1030

3130

12

CT-05

1:

ID-TYP-4205

20

DR-02A

CT-05

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

0

03 GL-05

ST-01

GL-05

GL-05

ID-TYP-4203

GL-05

ST-01

GL-05

GL-05

START POINT

SW-02 SW-01

SW-02

SW-02

SW-01

SW-01

SW-09

SW-02

SW-02

SW-01

SW-01

CT-05

SW-02

600

600

CT-05

CT-05

SW-01

SW-09

SW-09 ST-01 120

110

ST-01

ST-01

ST-01 SW-09

A 1110

1000

CT-05

SW-09

SW-01

SW-01

SW-01

SW-01

SW-02

SW-02

SW-02

SW-02

600

CT-05

START POINT

CT-05

DR-02A

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

GL-05

GL-05

ST-01

GL-05

:-

GL-05

110

700

Consultant 2 Discipline

04

CT-05

ID-TYP-4203

:Consultant 1 Discipline

0 20

PE O L S

FEMALE TOILET 08

FL-02

ID-TYP-4205

:07

Other Party 2 Responsibility

CT-05

ID-TYP-4205

CHECK 3480 ON SITE

CT-05 SW-10

1:

880

FFL.+0000

05

CT-05

PL-05

PL-05

PL-05

ID-TYP-4204

PL-05

PL-05

PL-05

CT-05 2380

ID-TYP-4204

SW-06

SW-06

Other Party 1 Responsibility

::Client

2180 1500

SW-06

::-

::-

06

CT-05

::-

SW-06

SW-06

SW-06

::::-

SW-06

Project

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

THE LORD RAMA 9

CT-05

CT-05

TOP.+1200

ST-01

200

200

ST-01 CT-05

Drawing title

933

933

933

933

933

933

PUBLIC TOILET DETAIL : PLAN LEVEL B1 -

933

CHECK 6530 ON SITE

Date generated

-

PUBLIC TOILET DETAIL (B1 FL.) : PLAN

-

SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4201

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

8

100

100

100

150

100

200

CH.+2600

600

START POINT

CT-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

CT-05

PL-05

CT-05

PL-05

PL-05

PL-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

PL-05

:

2400

MECHANICAL ENGINEERS :

2200

วิศวกรงานระบบ

:

1900

2600

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

SW-10

OPEN TO URINAL

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

1200

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

100

Key Plan

FFL.+0.000 838

1000

960

166

600

333

600

333

600

333

600

166

6530 (C.O.S) 10mm. STAINLESS STEEL FRAME COLOR TO MATCH W/ SS-01

01

SCALE

-

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

ELEVATION 1:25

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

8

Consultant 2 Discipline

:Consultant 1 Discipline

:100

100 Other Party 2 Responsibility

::-

CH.+2600

::-

START POINT

START POINT

VARIES

600

Other Party 1 Responsibility

CT-05

CT-05

::::Client

::-

300

LED STRIP

GL-05

+1400

GL-05 ST-01

GL-05

PL-05

::-

PL-05

Project

JO-15

THE LORD RAMA 9

1400

SW-06

SW-06

SW-06

SW-06

ST-01

ST-01

ST-01

ST-01

SW-03A

SW-03A

SW-03A

SW-03A

1200

1700

1900

JO-15

PL-05

Drawing title

600

PUBLIC TOILET DETAIL ELEVATION 01,02 LEVEL B1 100

ST-01 FFL.+0.000 640

02 -

350

ELEVATION SCALE

1:25

350 350 2680 (C.O.S)

350

640

466

466

466 466 3732 (C.O.S)

466

466

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4202

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 150

600

150

600

150

600

600

150

600

150

600

100

140

100

150

100

150

CH.+2600

START POINT

FIXED

:

1650

1750

OWNERS : เจ้าของ

ST-01

ST-01

ST-01

GL-05

ST-01

GL-05

ST-01

GL-05

ST-01

GL-05

ARCHITECTS : สถาปนิก

ST-01

GL-05

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

GL-05

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

SW-09

CT-05 SW-01

SW-09

SW-01

SW-01

SW-09

SW-01

SW-01

:

CT-05

MECHANICAL ENGINEERS :

SW-01 DR-02A

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

100

:

ST-01

INTERIOR DESIGNER :

มัณฑนากร

:

250

+850

วิศวกรงานระบบ

:

ST-01

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

850

Key Plan

SW-02

SW-02

600

SW-02

SW-02

SW-02

750

750

SW-02

ST-01

FFL.+0.000 800

440

750

750

750 6530 (C.O.S)

440

936

ELEVATION

03

SCALE

-

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:100

100

100 Other Party 2 Responsibility

::-

CH.+2600

::-

START POINT

Other Party 1 Responsibility

::::-

1750

Client

ST-01

ST-01 GL-05

ST-01 GL-05

ST-01 GL-05

::-

ST-01

::-

GL-05

2600

Project

SW-09 CT-05

CT-05

SW-01

SW-09

SW-01

SW-01

THE LORD RAMA 9

SW-01

SW-10 ST-01

ST-01

ST-01

ST-01

850

Drawing title

SW-02

SW-02

SW-02

SW-02

PUBLIC TOILET DETAIL ELEVATION 03,04 LEVEL B1

ST-01

Date generated

FFL.+0.000 1100

04 -

1410

ELEVATION SCALE

1:25

120

425 5730 (C.O.S)

750

750

750

425

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4203

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

8 100 150

CH.+2600

100

150

100

600

START POINT

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1400

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

CT-05

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

2600

+1200

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

:

PL-05

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

1900

:

:

INTERIOR DESIGNER :

ST-01

SW-06

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

มัณฑนากร

:

1200

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

SW-03A

100

Key Plan

FFL.+0.000 800

05

600

336

600

336

600

336 5730 (C.O.S)

600

336

600

331

600

138

ELEVATION SCALE

-

294

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

8

Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::-

CH.+2600

::-

START POINT

600

Other Party 1 Responsibility

CT-05

::-

1400

::Client

::PL-05

PL-05

PL-05

PL-05

PL-05

::-

PL-05

THE LORD RAMA 9 1900

+1200

2600

Project

1200

SW-06

SW-06

ST-01

SW-03A

SW-06

ST-01

SW-03A

SW-06

ST-01

SW-03A

ST-01

SW-06

SW-03A

SW-06

ST-01

SW-03A

SW-06

ST-01

SW-03A

ST-01

SW-03A

Drawing title

100

PUBLIC TOILET DETAIL ELEVATION 05,06 LEVEL B1 FFL.+0.000 466

06 -

466

ELEVATION SCALE

1:25

466

466

466

466

466 466 6530 (C.O.S)

466

466

466

466

466

466

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4204

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

A

100

100

100

200

CH.+2600

150

100

150

200

START POINT

600

START POINT

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

1400

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

CT-05

CT-05

GL-05

GL-05

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

ST-01

PL-05

SW-09

PL-05

SW-09

1900

SW-01

PL-05

PL-05

ST-01

:

MECHANICAL ENGINEERS :

SW-01

SW-02

SW-02

:

250

250

SW-06 ST-01

LANDSCAPE DESIGNER :

200

07

1300

1030

500

100

100 500 6730 (C.O.S)

700

680

1300

200

ELEVATION SCALE

-

Key Plan

100

100

FFL.+0.000

ภูมิสถาปนิก

:

600

SW-03A

600

SW-03A

ST-01

มัณฑนากร

:

1200

1200

INTERIOR DESIGNER :

ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

+850 ST-01

วิศวกรงานระบบ

:

1900

2600

+1200

800

CT-05

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

A

Consultant 2 Discipline

:Consultant 1 Discipline

:100

100

100

100 150

200

CH.+2600

150

Other Party 2 Responsibility

START POINT

START POINT

::::-

START POINT

FIXED

900

Other Party 1 Responsibility

CT-05

::-

1400

::Client

CT-05

::-

LED STRIP

300

CT-05

GL-05 GL-05 PL-05

PL-05

SW-09

+1200 1900

SW-01 SW-10

DR-02A

Project

JO-15

2400

ST-01

::-

THE LORD RAMA 9

SW-02

1400

1200

250

+850 ST-01

SW-03A 600

PUBLIC TOILET DETAIL ELEVATION 07,08 LEVEL B1

100

ST-01

Drawing title

SW-04

SW-04

FFL.+0.000 200

08 -

1300

ELEVATION SCALE

1:25

880 3480 (C.O.S)

Date generated

936

100

500

1030

120 3130 (C.O.S)

450

830

10mm. STAINLESS STEEL FRAME COLOR TO MATCH W/ SS-01

100

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4205

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

7

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 9430 ON SITE

600

1980

SW-07

926

936

936

CT-05

936

936

926

CT-05

CT-05

SL OP E

FEMALE TOILET 1:2

1240

GL-05 SW-01

FL-02

00

05

FFL.+0000

CT-05

:

ARCHITECTS : สถาปนิก

01 ID-LR9-4207

PL-05

PL-05

PL-05

PL-05

PL-05

OP E

02

SL

GL-05

ID-LR9-4207

06 ID-LR9-4209

SW-06

SW-06

SW-06

0

SW-01

:20 E1 OP

1:

SL

20

PL-05

CHECK 2730 ON SITE

PL-05

0

PL-05

SW-09

CHECK 2980 ON SITE

OWNERS : เจ้าของ

ID-LR9-4209

SW-02 800

936

TOP.+850

ST-01

690

320

SW-06

SW-06

SW-06

SW-06

SW-02

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

CT-05

CT-05

มัณฑนากร

:

1500

800

INTERIOR DESIGNER :

SW-09

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

GL-05

SW-03A

SW-01

SW-03A

SW-03A

SW-03A

SW-03A

SW-07

SW-03A

SW-03A

Key Plan

SW-07

ST-01

ST-01

1000 SW-10

200

CT-05

ST-01

TOP.+1200

DR-02A

ST-01 CT-05

START POINT

SW-09

ST-01

ST-01

ST-01 GL-05

200

690

1590

200

SW-02

TOP.+1200

CT-05

SW-11H SW-04H

SW-02H 1090

ST-01

SW-07 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

SW-03AH

CT-05

SW-03A

SW-03A

SW-03A

SW-03A

ID-LR9-4210

1900

OP

08

SL

A

E1

CHECK 2180 ON SITE

:20

0

SW-06H

SW-05H CT-05 SW-06

DISABLED TOILET 11 ID-LR9-4210

09

FL-02

SW-06

SW-06

Consultant 3 Discipline

:-

SW-07H

ID-LR9-4210

Consultant 2 Discipline

:-

CT-05

0 OP

SW-10 CT-05

PL-05

PL-05

PL-05

TOP.+1200

SL

PL-05

CT-05

140

E1

ID-LR9-4210

START POINT

CHECK 4080 ON SITE

Consultant 1 Discipline

:20

1090

CT-05

10

1890

280

03 ID-LR9-4208

FL-02

E

CT-05

600

SW-02

90

JO-15

SW-01

ST-01

CT-05

SW-04 SW-02

SW-01

SW-01

CT-05

::::Project

JO-15 SW-04

THE LORD RAMA 9

SW-04

CT-05 SW-07

SW-09 START POINT

GL-05

SW-02

1:

20 0

TOP.+850 CT-05

2180

1020

SL OP

SW-09

ST-01

SW-07

ST-01

ST-01

CT-05

TOP.+1200

140

1000

CHECK 1620 ON SITE

00

DR-02A

::-

Client

CT-05

ID-LR9-4208

GL-05

::-

::-

FFL.+0000

04

GL-05

Other Party 2 Responsibility

::-

JO-15

ID-LR9-4209

1:2

CT-05

05

MALE TOILET E

530

ID-LR9-4209

OP

2000

SL

07

CT-05

:-

Other Party 1 Responsibility

SW-04 SW-10

MF. MF. MF. MF. MF. MF. App'd

:-

SW-06

FFL.+0000 DR-04

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Drawing title

490 1080

-

PUBLIC TOILET DETAIL (1,7 FL.) : PLAN

-

SCALE

120

800

800

490

2580

470 120

800

800

560

2630

CHECK 6530 ON SITE

1:25

PUBLIC TOILET DETAIL : PLAN LEVEL 1, 7 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4206

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

200

7

80

CH.+2600

200

8

150

150

150

150

150

600

FIXED

CT-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

CT-05

CT-05

1650

:

GL-05

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

SW-10 2600

MECHANICAL ENGINEERS :

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

วิศวกรงานระบบ

:

SW-01 1900

DR-02A

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

SW-02 100

INTERIOR DESIGNER :

มัณฑนากร

:

250

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

FFL.+0.000

100

600

850

Key Plan

158

01

600

336

336

600

336

606

330

600

336 9430 (C.O.S)

600

336

600

158

342

936

1021

600

ELEVATION SCALE

-

600

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1:25

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

8

:Consultant 1 Discipline

:Other Party 2 Responsibility

200

::-

CH.+2600

::-

START POINT

Other Party 1 Responsibility

600

::::-

1400

Client

CT-05

PL-05

PL-05

PL-05

CT-05

PL-05

PL-05

::Project

PL-05

THE LORD RAMA 9 1900

2600

+1200

CT-05

::-

ST-01

ST-01

1200

SW-06

ST-01

SW-06

ST-01

SW-06

ST-01

SW-06

ST-01

SW-06

ST-01

SW-06

SW-06 Drawing title

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

PUBLIC TOILET DETAIL ELEVATION 01,02 LEVEL 1, 7 100

Date generated

FFL.+0.000 463

463

468

468

468

468

468

468

6530 (C.O.S)

02 -

ELEVATION SCALE

1:25

468

468

468

468

468

458

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4207

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8

100

CH.+2600

CT-05

900

START POINT

CT-05

OWNERS : เจ้าของ

LED STRIP

:

300

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

GL-05 2600

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

JO-15 PL-05

PL-05

PL-05

PL-05

:

1900

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

1400

INTERIOR DESIGNER :

ST-01

มัณฑนากร

:

LANDSCAPE DESIGNER :

SW-04

ภูมิสถาปนิก

:

100

Key Plan

FFL.+0.000

162

600

336

600

335

600

337

600

960

4530 (C.O.S)

ELEVATION

03

SCALE

-

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

8

Consultant 3 Discipline

:Consultant 2 Discipline

:150

Consultant 1 Discipline

150

CH.+2600

200

200

:START POINT

Other Party 2 Responsibility

::-

150

::Other Party 1 Responsibility

ST-01

ST-01

ST-01

GL-05

GL-05

GL-05

Client

::::-

2600

+1200

ST-01

1750

CT-05

::-

1650

1400

::-

PL-05

PL-05

SW-09 SW-01

Project

SW-09

SW-01

CT-05

SW-01

DR-02A

100

THE LORD RAMA 9

ST-01 SW-04

SW-04

SW-04 SW-02

SW-02 600

SW-02

850

1200

ST-01 ST-01

+850

250

ST-01

PUBLIC TOILET DETAIL ELEVATION 03,04 LEVEL 1, 7

ST-01 FFL.+0.000 560

800

800

470

120

490

800 6530 (C.O.S)

04 -

ELEVATION SCALE

1:25

800

490

120

Drawing title

Date generated

1080

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4208

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

A

150

150 200

150

80

CH.+2600

200

150

START POINT

START POINT

CT-05

CT-05

:

1400

1400

OWNERS : เจ้าของ ARCHITECTS : สถาปนิก :

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

CT-05

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

PL-05

100

ST-01

450

450

100

MECHANICAL ENGINEERS :

PL-05

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

PL-05

1900

PL-05

1900

+1200

2600

:

ST-01

:

SW-04 JO-15

INTERIOR DESIGNER :

JO-15

มัณฑนากร

:

LANDSCAPE DESIGNER :

SW-06

ภูมิสถาปนิก

SW-03A

1200

SW-03A

1200

1200

:

Key Plan

FFL.+0.000

100

100

ST-01

1230

1300

200

200

1700

2080

100

6930 (C.O.S)

05 -

ELEVATION SCALE

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1:25

A 390

600

200

600

200

600

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

390

Consultant 3 Discipline

:150

150

150

Consultant 2 Discipline

150

Consultant 1 Discipline

200

200

80

CH.+2600

200

:CH.+2600

:START POINT Other Party 2 Responsibility

150

600

FIXED

::-

CT-05

::-

ST-01

SW-09 SW-01

SW-09 SW-01

1400

::-

CT-05

GL-05

SW-09

Client

DR-02A

ST-01

ST-01

::-

PL-05

Project

100

+850

THE LORD RAMA 9 SW-06

250

+850

250

100

SW-02

::-

ST-01

PL-05

CT-05

SW-01

SW-01

850

SW-02 600

SW-02

600

850

SW-03A SW-02

ST-01

100

Drawing title

FFL.+0.000

FFL.+0.000 690

800

::-

1200

GL-05

GL-05

1900

2600

GL-05

ST-01

1650

ST-01

2600

ST-01

1650

1750

Other Party 1 Responsibility

800

600

690

1020

2980 (C.O.S)

560 4080 (C.O.S)

1700

200

PUBLIC TOILET DETAIL ELEVATION 05,06,07 LEVEL 1, 7 Date generated

06 -

ELEVATION SCALE

1:25

07 -

ELEVATION SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4209

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

A

CH.+2600

CH.+2600

CH.+2600

START POINT

SET OUT

CH.+2200

OWNERS : เจ้าของ :

1650

ST-01 1250

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

CT-05

CT-05

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

GL-05

:

MECHANICAL ENGINEERS :

2600

2600

2600

SW-09H

DR-06

DR-04 SW-07H

SW-01H

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

SW-07H

INTERIOR DESIGNER :

มัณฑนากร

:

SW-06H

LANDSCAPE DESIGNER :

SW-02H

ภูมิสถาปนิก

:

Key Plan

SW-05H

SW-05H

950

SW-03H 800

SW-04H

SW-03AH 700

950

วิศวกรงานระบบ

:

ST-01

FFL.+0.000

FFL.+0.000

FFL.+0.000 580

08 -

460 390 1880 (C.O.S)

CHECK 1880 ON SITE

2180 (C.O.S)

ELEVATION SCALE

1100

450

09

1:25

-

ELEVATION SCALE

1:25

10 -

ELEVATION SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::-

CH.+2600 START POINT

Other Party 1 Responsibility

::::Client

::::-

2600

Project

THE LORD RAMA 9

DR-04

CT-05 SLIDING

Drawing title

PUBLIC TOILET DETAIL ELEVATION 08,09,10,11 LEVEL 1, 7 Date generated

FFL.+0.000 1136

VARIES 2180

11 -

ELEVATION SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4210

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

7

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 9430 ON SITE 2705 840

800

1140

600

200

600

600

944

TOP.+1200

ST-01 SW-09

SW-01

TOP.+850 ST-01

915

944

SW-01

SW-02

944

ST-01

CT-05

944

SW-03A

SW-03A

TOP.+1200

OWNERS : เจ้าของ

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

:

ARCHITECTS : สถาปนิก

1500

SW-01

944

ST-01

1500

GL-05

944

SW-07

SW-02 CT-05

GL-05

944

165

ST-01 ST-01

6605

465

200

600

120

GL-05 SW-06

SW-06

SW-06

SW-06

SW-06

SW-06

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

SW-06

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

02

SW-02

:

MECHANICAL ENGINEERS :

00

ID-LR9-4201

CHECK 3330 ON SITE

PE SL O

GL-05

120

SW-01 2380

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

SW-02

01 1230

ID-LR9-4201

ID-LR9-4201

06

FFL.+0000

ID-LR9-4201

SW-10

JO-15 SW-04

JO-15

SW-04

JO-15

350

DR-02A CT-05

SW-04

SW-04

SW-04

SW-04

SET OUT

SW-07

CT-05

ST-01 600

SET OUT

CT-05

ST-01

TOP.+1200

290

Key Plan

CT-05

ST-01

A

ภูมิสถาปนิก

:

CT-05

CT-05

ST-01 SW-01

CT-05

CT-05

600

CT-05

LANDSCAPE DESIGNER :

CT-05

JO-15

CT-05 610

TOP.+850

JO-15

SW-09

SW-01

SW-02

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

100

465

JO-15 SW-04

ST-01

มัณฑนากร

:

800

120 SW-02

INTERIOR DESIGNER :

0

03

:

20 1:

SW-01

FL-02

07

GL-05

MALE TOILET

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

1230

CT-05

ID-LR9-4201

E OP SL

ST-01

วิศวกรงานระบบ

:

1:2

800

SW-09

800

ST-01 SW-01

ST-01

SW-02

ST-01

SW-02

SW-01

SW-09

SW-02

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:-

SW-07

SW-01

Consultant 3 Discipline

SW-02

:1300

Consultant 2 Discipline

1279

GL-05

120

GL-05

4196

GL-05

GL-05

CHECK 2705 ON SITE

07

05

ID-LR9-4201

ID-LR9-4201

0 1:2 0

FL-02

E

::-

SL OP

152

FEMALE TOILET

06

CT-05

ID-LR9-4201

FFL.+0000 690

1000

CHECK 3480 ON SITE

SW-10 152

:Other Party 2 Responsibility

ID-LR9-4201

800

Consultant 1 Discipline

CT-05

04

600

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05 CT-05

SW-06

SW-06

:-

GL-05

CHECK 3480 ON SITE

1000

DR-02A

SW-06

SW-06

SW-06

SW-06

::Other Party 1 Responsibility

::::Client

::2180

CHECK 3330 ON SITE

CT-05

SW-06

::Project

CT-05 1500

THE LORD RAMA 9 SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

TOP.+1200

ST-01

CT-05

200

200

ST-01

TOP.+1200

Drawing title

PUBLIC TOILET DETAIL : PLAN LEVEL 2-6 933

-

PUBLIC TOILET DETAIL (2-6 FL.) : PLAN

-

SCALE

1:25

933

933

933 CHECK 6530 ON SITE

934

932

933

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS · RCP's SUBJECT TO FINAL DESIGN BY MEP ENGINEER

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4211

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

7

8

150

150

150

150

200

150

600

80

CH.+2600

200

150

CT-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

1650

ARCHITECTS : สถาปนิก

ST-01

ST-01

GL-05

:

ST-01

GL-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

GL-05

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

2600

:

SW-09

MECHANICAL ENGINEERS :

SW-09 SW-01

SW-01

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

100

SW-02 ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

ST-01

มัณฑนากร

:

LANDSCAPE DESIGNER :

250

+850

วิศวกรงานระบบ

:

PL-05 1900

SW-01

PL-05

ภูมิสถาปนิก

:

850

Key Plan

SW-02

600

SW-02

100

ST-01

FFL.+0.000 600

2105

120 172

600

344

600

344

600

344

600

344

600

344

600

344

600

172

9430 (C.O.S)

01

ELEVATION SCALE

-

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

8

Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::-

CH.+2600

::-

START POINT

600

600

Other Party 1 Responsibility

::::-

1400

Client

CT-05

CT-05

::-

CT-05

::-

PL-05

PL-05

PL-05

PL-05

Project

THE LORD RAMA 9

ST-01

ST-01

1200

SW-06

ST-01

SW-06

ST-01

SW-06

SW-06

ST-01

2000

1900

+1200

PL-05

2600

PL-05

ST-01

SW-06

ST-01

SW-06

SW-06 Drawing title

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

SW-03A

PUBLIC TOILET DETAIL ELEVATION 01,02 LEVEL 2-6

100

Date generated

FFL.+0.000 472

02 -

472

ELEVATION SCALE

1:25

472

472

472

472

472 472 6605 (C.O.S)

472

472

472

472

472

472

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4212

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

8

7

150

150

150

150

CH.+2600

200

150

200

150

START POINT FIXED

1400

OWNERS : เจ้าของ

CT-05

1650

:

CT-05

CT-05

2600

JO-15

JO-15

JO-15

JO-15

JO-15

:

:

MECHANICAL ENGINEERS :

SW-09

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

SW-02 100

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

250 1200

ภูมิสถาปนิก

:

ST-01

Key Plan

600

850

ST-01

วิศวกรงานระบบ

:

SW-01 DR-02A

ST-01

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

SW-10

JO-15

ARCHITECTS : สถาปนิก STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

GL-05

+1200

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

FFL.+0.000 800

03

502

800

800

800

800 9430 (C.O.S)

800

502

120

936

800

600

ELEVATION SCALE

-

800

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

8 198

600

200

600

200

600

200

600

200

600

Consultant 2 Discipline

198

:Consultant 1 Discipline

:150

150

Other Party 2 Responsibility

::-

200

150

80

CH.+2600

200

150

START POINT

::-

150

Other Party 1 Responsibility

::::-

ST-01

ST-01 GL-05

CT-05

ST-01

GL-05

ST-01

GL-05

CT-05

SW-09 SW-01

SW-01

SW-01

+850

Project

THE LORD RAMA 9

PL-05 SW-01

ST-01

100

SW-01

::-

GL-05

SW-09

DR-02A

ST-01

ST-01

250

2600

ST-01

::-

1650

1750

Client

SW-02

SW-02

SW-02

SW-02

PUBLIC TOILET DETAIL ELEVATION 03,04 LEVEL 2-6

SW-02 600

850

Drawing title

ST-01

Date generated

FFL.+0.000 1269

04 -

120

ELEVATION SCALE

1:25

498

800

800 6530 (C.O.S)

800

800

498

945

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4213

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8

150

150

CH.+2600

200

150

200

150

600

START POINT

CT-05 1400

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

2600

PL-05

PL-05

PL-05

PL-05

PL-05

PL-05

MECHANICAL ENGINEERS :

DR-02A

วิศวกรงานระบบ

1900

:

ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

2000

+1200

:

PL-05

:

INTERIOR DESIGNER :

มัณฑนากร

:

SW-06

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

1200

:

Key Plan

100

SW-03A

FFL.+0.000 933

166

600

333

600

333

600

333

600

333

600

333

600

166

6530 (C.O.S)

05

ELEVATION SCALE

-

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:-

A

Consultant 2 Discipline

:Consultant 1 Discipline

:150

150

150

150

Other Party 2 Responsibility

200

::-

CH.+2600

::-

SET OUT

600

Other Party 1 Responsibility

::::-

1400

Client

::CT-05

CT-05

800

CT-05

+1200

2600

GL-05 ST-01

PL-05

Project

SW-09

PL-05

::-

PL-05

PL-05

ST-01

THE LORD RAMA 9

SW-02

250

SW-06 ST-01

SW-03A

1200

SW-04 JO-15

1200

1200

1900

1900

SW-01

SW-03A

PUBLIC TOILET DETAIL ELEVATION 05,06 LEVEL 2-6

600

ST-01 ST-01

Drawing title

200

1300

100

100

Date generated

FFL.+0.000

1230

500

100

100

6930 (C.O.S)

06 -

ELEVATION SCALE

1:25

500

700

680

1300

200

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4214

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

A

150

150

150

150

200

150

CH.+2600

SET OUT

1400

1400

FIXED

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

CT-05

CT-05

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

CT-05

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

2600

:

ST-01

PL-05

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

OPEN TO VARITY

SW-04

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

1900

2199

DR-02A

2200

+1200

SW-10 ST-01

:

INTERIOR DESIGNER :

มัณฑนากร

:

SW-03A

LANDSCAPE DESIGNER :

1200

1200

1200

SW-06

SW-03A

ภูมิสถาปนิก

:

Key Plan

100

ST-01 FFL.+0.000 200

2022

936

VARIES

100

500

1230

1300

200

6930 (C.O.S)

07 -

ELEVATION SCALE

1:25

10mm. STAINLESS STEEL FRAME COLOR TO MATCH W/ SS-01

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

PUBLIC TOILET DETAIL ELEVATION 07 LEVEL 2-6 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4215

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

6 CHECK 1080 ON SITE

CHECK 3450 ON SITE 220

938

CHECK 1480 ON SITE

1354

938

OWNERS : เจ้าของ

CHECK 1480 ON SITE

900

580

580

:

900

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

D

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

TOP.+1200

CT-05

ST-01

TOP.+1200

CT-05

TOP.+1200 CT-05 SW-01

SW-07

ST-01

TOP.+1200

CT-05

TOP.+1200 CT-05

SW-01

SW-02

SW-07

ST-01

SW-01

SW-02

SW-07

SW-01

SW-08

SW-07

200

ST-01

200

ST-01

SW-08

SW-07

ST-01 SW-03B

SW-03B

SW-03B

:200 SW-06

MALE TOILET

MALE TOILET

CT-05

FEMALE TOILET

CT-05

CT-05 SW-01

04

05

CT-05

ID-LR9-4219

ID-LR9-4219

FL-02

CT-05

CT-02

CT-05

FFL.+0000

01 ID-LR9-4218

03 ID-LR9-4219

CT-02

07

FFL.+0000

2280

SW-06

CHECK 2480 ON SITE

SW-06

PE 1

SLO

ID-LR9-4220

:200

SW-06

06

SLO

:200 PE 1

02 ID-LR9-4218

SW-06

GL-05

GL-05

:200

FL-02 FFL.+0000

SLO

FEMALE TOILET

PE 1

:200

CT-05

GL-05

SW-03B

PE 1 SLO

1300

GL-05 CT-05

PE 1 SLO

CHECK 2490 ON SITE

1500

SW-03B

ID-LR9-4220

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

FFL.+0000

:-

SW-08

Consultant 1 Discipline

SW-04

:-

990

GL-05

SW-04

DR-02B START POINT

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

CT-05

DR-02B

CT-05

START POINT

Other Party 2 Responsibility

SW-04

CT-05

DR-02B CT-05

DR-02B CT-05 START POINT

START POINT

::::Other Party 1 Responsibility

::800

290

220

1215

800

1215

690

800

800

690

::Client

::-

TYPICAL TOILET DETAIL - TYPE B (9-22,25 FL.) : PLAN

-

SCALE

::-

1:25

Project

THE LORD RAMA 9

Drawing title

TYPICAL TOILET DETAIL : PLAN LEVEL 9-22,25 TYPE-B Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4216

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

6

:

ARCHITECTS : สถาปนิก

800

290

220

1215

800

1215

690

800

800

:

690

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : START POINT

CT-05

START POINT

CT-05

START POINT

START POINT

CT-05

CT-05

:

CT-05

INTERIOR DESIGNER :

DR-02B

DR-02B

DR-02B

SW-04

GL-05

มัณฑนากร

:

DR-02B

LANDSCAPE DESIGNER :

SW-04

ภูมิสถาปนิก

990

:

Key Plan

SW-04

ID-LR9-4219

CHECK 2490 ON SITE

SW-01

MALE TOILET FL-02

CT-05

FFL.+0000

07

FEMALE TOILET FL-02

ID-LR9-4220

FFL.+0000

FFL.+0000

CT-05

1300

1500

CT-05

SW-03B

:200 SW-03B

GL-05

ST-01

SW-02

03 ID-LR9-4219

01 ID-LR9-4218 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

SW-07

SW-07

SW-03B

GL-05 SW-09

SW-02

SW-01 200

PE 1

:200 PE 1 SLO

CT-05

ID-LR9-4220

:200

SW-07

PE 1

SW-07

06

SW-06

GL-05

SW-03B SW-09

TOP.+1200

:200

SW-03B

SW-06

CT-05

SLO

02 ID-LR9-4218

GL-05

SW-06

PE 1

:200

CT-05

SLO

SW-06

PE 1

CT-05

SW-06

SLO

SW-09

SLO

FFL.+0000

CT-05 CT-05

FEMALE TOILET FL-02

2280

CT-05

ID-LR9-4219

MALE TOILET FL-02

CHECK 2480 ON SITE

05

SW-08

SW-09 SW-07

SW-08

SW-01 TOP.+1200 CT-05

TOP.+1200

CT-05

TOP.+1200

SW-01

SW-01

TOP.+1200 CT-05

200

SW-08

04

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

ST-01

ST-01

ST-01

ST-01

ST-01

:Consultant 1 Discipline

:Other Party 2 Responsibility

C

::::Other Party 1 Responsibility

::::Client

::::Project

-

TYPICAL TOILET DETAIL - TYPE A (8-22,25 FL.) : PLAN

-

SCALE

THE LORD RAMA 9 1:25

Drawing title

TYPICAL TOILET DETAIL : PLAN LEVEL 8-22,25 TYPE-A Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4217

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

6

600

600

CH.+2600 START POINT

ST-01

1400

ST-01

1400

ST-01

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

GL-05

GL-05

ARCHITECTS : สถาปนิก

GL-05

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

2600

+1200

GL-05

SW-09 PL-05

SW-01

PL-05

SW-01

PL-05

SW-01

:

SW-09

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

SW-01 250

PL-05

SW-09

ST-01 SW-06

ST-01 ST-01

SW-03B

ST-01 +850

SW-06 SW-03B

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

SW-03B SW-06

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

ST-01 1200

INTERIOR DESIGNER :

มัณฑนากร

SW-02

SW-02

SW-08

950

:

SW-08

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

ST-01

ST-01

ST-01

680

680

FFL.+0.000 540

540

938

1080 (C.O.S)

01

938

800 1480 (C.O.S)

800 1480 (C.O.S)

ELEVATION SCALE

-

1354 3230 (C.O.S)

220

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:CH.+2600

Other Party 2 Responsibility

START POINT

::ST-01

ST-01

::-

ST-01

Other Party 1 Responsibility

CT-05

GL-05

PL-05

Client

::-

PL-05

::-

2600

Project

SW-01

SW-01

SW-09

ST-01

SW-03B

THE LORD RAMA 9 250

SW-03B

ST-01 ST-01

+850

100

+1200

GL-05

::-

1750

CT-05

1650

1400

::-

850

1200

ST-01

ST-01

SW-02

600

SW-02

Drawing title

PUBLIC TOILET DETAIL ELEVATION 01,02 LEVEL 8-22,25 TYPE-A,B

FFL.+0.000 938

02 -

1354 3230 (C.O.S)

ELEVATION SCALE

1:25

938

Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4218

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

6

CH.+2600 START POINT

400

START POINT

START POINT

FIXED

START POINT

FIXED

FIXED

FIXED

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

2600

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

CT-05

2200

CT-05 DR-02B

CT-05

DR-02B

:

CT-05

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

DR-02B

:

DR-02B

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

FFL.+0.000 494

03

150

150

836 1480 (C.O.S)

494

1197

836 3230 (C.O.S)

1197

122 220

836 1080 (C.O.S)

122

ELEVATION SCALE

-

836 1480 (C.O.S)

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

600

:CH.+2600

CH.+2600

Other Party 2 Responsibility

START POINT

400

START POINT

::::Other Party 1 Responsibility

GL-05

::-

GL-05

CT-05

ST-01 DR-02B

PL-05

CT-05

+850

THE LORD RAMA 9

250

SW-06 1200

Project

100

+850

100

SW-02

::-

DR-02B 2200

SW-01

SW-01

1900

SW-09

Client

2600

+1200

2600

CT-05

::-

1650

1650

1400

::-

600

850

SW-08

850

SW-03B

100

Drawing title

FFL.+0.000

FFL.+0.000 200

1480

600

800

900 2480 (C.O.S)

2480 (C.O.S)

04 -

ELEVATION SCALE

1:25

05 -

ELEVATION SCALE

1:25

980

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

PUBLIC TOILET DETAIL ELEVATION 03,04,05 LEVEL 9-21 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4219

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600

CH.+2600

START POINT

1650

1400

400

400

START POINT

GL-05

OWNERS : เจ้าของ :

ST-01 DR-02B

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

SW-01

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

SW-02

MECHANICAL ENGINEERS :

100

2200

:

SW-09

DR-02B 2200

+1200

2600

2600

ARCHITECTS : สถาปนิก

CT-05

CT-05

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

600

600

850

SW-03B

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

1200

SW-04

+850

250

SW-06

วิศวกรงานระบบ

:

ภูมิสถาปนิก

:

Key Plan

FFL.+0.000

FFL.+0.000 590

06 -

1690 2480 (C.O.S)

ELEVATION SCALE

1:25

1880

200

600 2480 (C.O.S)

07 -

ELEVATION SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

PUBLIC TOILET DETAIL ELEVATION 03,04,05 LEVEL 9-21 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4220

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

6

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

05

06

ID-LR9-4223

ID-LR9-4223

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

D

:

INTERIOR DESIGNER :

มัณฑนากร

:

2760

120

1500

LANDSCAPE DESIGNER :

3400

ภูมิสถาปนิก

:

600

PL-05

CT-05

600

Key Plan

SW-07

CT-05

ST-01 SW-09

GL-05

SW-06

ST-01

E1

:20

SW-03B

0

0

ST-01 SW-02

SLO

JO-15

SW-02

FL-02

PL-05

DR-02B

SW-04

SW-03B

FFL.+0000

ST-01

SET OUT

Consultant 1 Discipline

ID-LR9-4222

ST-01

SET OUT

CT-05

:02

DR-02B

PL-05

893

FL-02

CT-05

880

850

CT-05

CT-05

SW-06

SW-04 SW-04

SW-03B

:Other Party 2 Responsibility

::-

PL-05

::Other Party 1 Responsibility

893

SW-06

Consultant 2 Discipline

2680

930

TOP.+1200

SW-03B

SW-06

MALE TOILET

SW-01 SW-02

MF. MF. MF. MF. MF. MF. App'd

:-

CT-05 TOP.+1200

GL-05

ST-01

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 3 Discipline

300

ST-01

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:-

ID-LR9-4223

SW-09

PL-05

CT-05

1:20

01 ID-LR9-4222

07

FFL.+0000 ST-01

CT-05

PE

TOP.+1200

CT-05

OP

893

SW-01

SL

CT-05 TOP.+1200

900

TOP.+1200

GL-05 SW-01

FEMALE TOILET SW-06

SW-07 SW-06

SW-09

0 20

E OP SL GL-05

SW-03B

PL-05

CT-05

GL-05

1:

ST-01

827

CT-05

ST-01

PL-05

::::-

ST-01

CT-05

PL-05

Client

::200

300

2480

SW-02

SW-02

CT-05

827

04 ID-LR9-4223

SW-01

SW-07

SW-01

SW-03B

03 ID-LR9-4223

600

827

TOP.+1200

ST-01

660

650

1500

880 1500

370

800

90

2760

810 120

-

TYPICAL TOILET DETAIL - TYPE B (8 FL.) : PLAN

-

SCALE

800 1700

90

700

200

1580 120

::Project

1500 3080

THE LORD RAMA 9

1:25

Drawing title

TYPICAL TOILET DETAIL : PLAN LEVEL 8 TYPE-B Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4221

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CH.+2600 START POINT

600

START POINT

1400

ST-01 1650

ST-01

OWNERS : เจ้าของ :

797

ARCHITECTS : สถาปนิก

1900

PL-05

SW-09

SW-09

SW-01

SW-01

SW-02

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

PL-05

SW-02

MECHANICAL ENGINEERS :

:

250

SW-06

INTERIOR DESIGNER :

850

SW-02

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

600

Key Plan

100

100 660

2760 (C.O.S)

มัณฑนากร

:

:

ST-01

1500

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

SW-03B

FFL.+0.000

วิศวกรงานระบบ

:

SW-03B

-

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

SW-01

ST-01

01

:

ST-01

ST-01

1203

:

CT-05

GL-05

1200

ST-01

GL-05

1900

GL-05

100

2600

CT-05

+1200

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

600

600

900

1900 4900 (C.O.S)

120

1500

ELEVATION SCALE

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:-

CH.+2600 START POINT

START POINT

Other Party 2 Responsibility

START POINT

FIXED

FIXED

600

CT-05

::::Other Party 1 Responsibility

1400

::::-

CT-05 797

GL-05 JO-15

ST-01

100 SW-01 DR-02B

1900

PL-05

DR-02B

SW-02

Project

THE LORD RAMA 9

1200

SW-03B

SW-04 600

SW-04

1203

SW-03B

::-

PL-05

250

SW-06 1200

ST-01

SW-09 1900

2600

+1200

::-

200

200

Client

Drawing title

FFL.+0.000 1500

02 -

ELEVATION SCALE

1:25

100

100

ST-01

500

1080 4900 (C.O.S)

120 100

936

64

600

100 120

936

224 2760 (C.O.S)

1500

TYPICAL TOILET DETAIL:TYPE-B ELEVATION 01,02 LEVEL 8 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4222

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CH.+2600

CH.+2600

CH.+2600

600

600

600

START POINT

CT-05 1400

CT-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

CT-05

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง OPEN

:

PL-05

PL-05

PL-05

PL-05

2000

1900

PL-05

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

DR-02B PL-05

PL-05

PL-05

:

1900

300

2600

600

2000

+1200

780

2600

2600

100

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

1200

1000

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

SW-04

SW-04

SW-04

Key Plan

FFL.+0.000 900

2680 (C.O.S)

ELEVATION

03

SCALE

-

600

147

04

1:25

-

293

600 2680 (C.O.S)

293

600

FFL.+0.000 107

147

ELEVATION SCALE

100

200

ST-01 FFL.+0.000

100

JO-15

1780

ภูมิสถาปนิก

:

05

1:25

-

600

233

600 2490(C.O.S)

233

600

107

ELEVATION SCALE

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

235

CH.+2600

600

200

600

845

:-

CH.+2600

Other Party 2 Responsibility

::::-

ST-01

ST-01

ST-01

ST-01

::-

1650

ST-01

1750

1750

ST-01

1650

Other Party 1 Responsibility

::Client

GL-05

SW-09 SW-01

GL-05

ST-01

DR-02B

2600

2600

GL-05

GL-05

GL-05

::::-

DR-02B

SW-01

SW-01

SW-01

SW-01

Project

250

ST-01

SW-02

SW-02

SW-02

ST-01

600

SW-02

100

ST-01

THE LORD RAMA 9

250

100

ST-01

850

ST-01

600

850

SW-02

ST-01

Drawing title

FFL.+0.000

TYPICAL TOILET DETAIL:TYPE-B ELEVATION 03,04,05,06,07 LEVEL 8

FFL.+0.000

450

06 -

800

ELEVATION SCALE

1:25

450 2490 (C.O.S)

790

535

800

545

600

2490 (C.O.S)

07 -

ELEVATION SCALE

1:25

Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4223

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

02

01

03

ID-LR9-42XX

ID-LR9-42XX

ID-LR9-42XX

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

10

CHECK 3580 ON SITE 1500

352

726

CH.+2600

352

650

600

200

ST-01

SW-02

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

ST-01 GL-05

+1200

FEMALE TOILET

CT-05

CT-05

FL-02 FFL.+0000

SW-03B

SW-06 PL-05

200

ST-01 SW-09

04

SW-02

CT-05

CT-05

INTERIOR DESIGNER :

SW-04

CT-05

90

01

1240

600

150 2880 (C.O.S)

600

765

840

840 1680 (C.O.S)

ELEVATION SCALE

-

800

CHECK 2880 ON SITE

DR-02B

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

ID-LR9-42XX

JO-15

FL-02

D

TOP.+1200

SL OP E

PL-05 SW-03B

1:2 00

CT-05

:-

07

Consultant 2 Discipline

ID-LR9-42XX

:Consultant 1 Discipline

:Other Party 2 Responsibility

ST-01

TOP.+1200

CT-05

600

600

Other Party 1 Responsibility

SW-07

1400

TOP.+1200

::-

445

470

875

890

1400

200

CT-05

SW-04

::-

START POINT

ST-01

START POINT

ST-01

MF. MF. MF. MF. MF. MF. App'd

Consultant 3 Discipline

CH.+2600

SW-04

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

1390

1240

SW-04

CT-05

CHECK 2280 ON SITE

CT-05

SW-06

ภูมิสถาปนิก

:

500

ID-LR9-42XX

06

FFL.+0000

LANDSCAPE DESIGNER : Key Plan

START POINT

PL-05

PL-05

มัณฑนากร

:

GL-05

MALE TOILET

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

CT-05

SW-06

วิศวกรงานระบบ

:

ID-LR9-42XX

ST-01

GL-05

:

MECHANICAL ENGINEERS :

SW-02

765

SW-03B CT-05

PL-05

START POINT

SW-01

SW-02

ST-01

PL-05

SW-01

FFL.+0.000

CT-05

SW-01

PL-05

SW-09

05 DR-02B

TOP.+1200 CT-05

PL-05

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

CT-05 800

CT-05

ST-01

PL-05

190

TOP.+1200

425

790

PL-05

100

1200

GL-05

:

PL-05

250

00

ARCHITECTS : สถาปนิก :

2600

1: 2

SW-02

OWNERS : เจ้าของ :

GL-05

1900

426

OP E

SW-01

100

SL

SW-03B

SW-09

600

SW-01

CHECK 2378 ON SITE

TOP.+1200

416

CT-05

SW-06

ST-01

413

CHECK 1680 ON SITE

PL-05

CT-05

SW-07

CT-05

CT-05 1400

CT-05

CT-05

910

CT-05

CT-05

::+1200

ST-01

::-

ST-01

Project

1900

1:25

ST-01

1900

-

SCALE

2600

TYPICAL TOILET DETAIL - TYPE C (8-35 FL.) : PLAN

::Client

CT-05

CHECK 3590 ON SITE

-

::-

SW-03B SW-06

SW-03B

SW-06

SW-06 1200

1200

SW-06

SW-03B

SW-03B

THE LORD RAMA 9

ST-01

FFL.+0.000

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

200

1240

1240 2880 (C.O.S)

TYPICAL TOILET DETAIL : PLAN LEVEL 8-35, ELEVATION 01,02 TYPE-C

100

100

Drawing title

200

840

840 1680 (C.O.S)

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

02 -

ELEVATION SCALE

1:25

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4224

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

52 CH.+2600

600

50

600

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

52

CH.+2600 START POINT

START POINT FIXED

600

FIXED

1650

CT-05

CT-05 797

GL-05

OWNERS : เจ้าของ

1750

1650

1400

CT-05

GL-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

GL-05

:

2600

SW-09 SW-01

DR-02B

844 2380 (C.O.S)

836

100

836

SW-02

SCALE

-

Key Plan

100

FFL.+0.000

1400

1500

726 3580 (C.O.S)

2280 (C.O.S)

ELEVATION

03

ภูมิสถาปนิก

:

600 600

มัณฑนากร

:

LANDSCAPE DESIGNER :

ST-01 ST-01

INTERIOR DESIGNER :

SW-03B SW-02

FFL.+0.000

:

600

1200

SW-04

850

SW-04

1203

ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

250

ST-01 250

+850

วิศวกรงานระบบ

:

100

DR-02B

:

MECHANICAL ENGINEERS :

1900

PL-05

SW-01

100

SW-01 SW-02

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

ST-01

850

2600

200 +1200

ARCHITECTS : สถาปนิก :

CT-05 JO-15

:

650

352

ELEVATION

04

1:25

352

SCALE

-

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

132

600

200

600

132

:Consultant 1 Discipline

CH.+2600

CH.+2600

:-

START POINT

START POINT

600

600

Other Party 2 Responsibility

::-

CT-05

::Other Party 1 Responsibility

CT-05

797

797

::GL-05

GL-05

::-

CT-05

Client

+1200 CT-05

CT-05

+1200

2600

ST-01 DR-02B

SW-09 SW-01

PL-05

1900

2600

200 DR-02B SW-01

::::Project

ST-01 ST-01 SW-06

SW-06

SW-03B

THE LORD RAMA 9

1203

SW-03B

1203

ST-01

SW-02

SW-02

100

ST-01

FFL.+0.000 880

1200

Drawing title

FFL.+0.000 915

1500

432

3580 (C.O.S)

05 -

ELEVATION SCALE

1:25

06 -

ELEVATION SCALE

1:25

800 3580 (C.O.S)

432

1000

TYPICAL TOILET DETAIL LEVEL 8-35, ELEVATION 03-06 TYPE-C Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4225

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600

1400

START POINT

CT-05

OWNERS : เจ้าของ

CT-05

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

DR-02B

:

MECHANICAL ENGINEERS :

1900

2600

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

JO-15

CT-05

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

ST-01

:

SW-03B SW-06

INTERIOR DESIGNER :

มัณฑนากร

1200

:

ST-01 SW-04

SW-04

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

100

ST-01 FFL.+0.000 900

890

437

437

470

445

CHECK 3580 ON SITE

07 -

ELEVATION SCALE

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL TOILET DETAIL LEVEL 8-35, ELEVATION 07 TYPE-C Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4226

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

04

05

06

07

ID-LR9-4229

ID-LR9-4229

ID-LR9-4229

ID-LR9-4230

3180 (C.O.S) 900

1380 365

OWNERS : เจ้าของ :

1980 (C.O.S) 900

650

990

ARCHITECTS : สถาปนิก

990

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

365

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

SW-03B

ST-01 SW-09

SW-02

SW-01

CT-05

SW-07

CT-05 SW-03B

Key Plan

ID-LR9-4228

CT-05

0

SW-06

:20

0

0

SL

:20

:20

E1

OP E1

OP

E1 OP

SL

SL

940

SW-06

PL-05

PL-05

PL-05

CT-05

CT-05

PL-05

MALE TOILET

PL-05

01 ID-LR9-4228

FEMALE TOILET ST-01 CT-05 SW-04

Consultant 2 Discipline

ID-LR9-4229

DR-02B CT-05

GL-05 325

340

CT-05

Consultant 1 Discipline

Other Party 2 Responsibility

SW-01 SW-04 SW-02

::-

ST-01 SW-04

MF. MF. MF. MF. MF. MF. App'd

:03

1300

CT-05 ST-01

650

GL-05 SW-09

ST-01 CT-05

CT-05

SW-02

JO-15

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 3 Discipline

FFL.+0000

SW-01

375

SW-04

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:-

FL-02 325

FL-02 FFL.+0000

JO-15

02 1500

1500

CT-05

GL-05

PL-05

ภูมิสถาปนิก

:

CT-05

CT-05

375

LANDSCAPE DESIGNER :

SW-03B

SW-06

PL-05

มัณฑนากร

:

ST-01 GL-05

SW-06

INTERIOR DESIGNER :

SW-02 SW-03B

CT-05

3530 (C.O.S)

ST-01 SW-07

3540 (C.O.S)

600

CT-05

ST-01 SW-01

2040

ST-01 SW-07

::-

DR-02B

::-

CT-05

Other Party 1 Responsibility

START POINT

START POINT

::::Client

1190

800 3180 (C.O.S)

1190

600

590 1990 (C.O.S)

::-

795

::Project

THE LORD RAMA 9 -

TYPICAL TOILET DETAIL (24,26-35 FL.) : PLAN

-

SCALE

1:25

Drawing title

TYPICAL TOILET DETAIL : PLAN LEVEL 24,26-35 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4227

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600 START POINT

600

600

START POINT

ST-01

ST-01

1650

1400

ST-01

CT-05

CT-05

CT-05 GL-05

GL-05

OWNERS : เจ้าของ :

CT-05

ARCHITECTS : สถาปนิก :

PL-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

2600

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

100

ST-01

SW-06

ST-01

ST-01

SW-03B

SW-03B

SW-06

MECHANICAL ENGINEERS :

1900

ST-01 SW-03B

250

+850

:

SW-01

1900

SW-01

ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

SW-03B

SW-06

วิศวกรงานระบบ

:

:

SW-06

INTERIOR DESIGNER :

ST-01

มัณฑนากร

1200

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

SW-02

FFL.+0.000 457

100

ST-01

100

600

SW-02

1354 3180 (C.O.S)

457

457

457

495

495

495

495

1980 (C.O.S)

ELEVATION

02

SCALE

-

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

CH.+2600

:Other Party 2 Responsibility

::-

600 ST-01

CT-05

ST-01

ST-01

CT-05

CT-05

::Other Party 1 Responsibility

1650

::::-

PL-05

GL-05

Client

PL-05

PL-05

PL-05

PL-05

::-

PL-05

::-

SW-01

100

ST-01 ST-01

SW-02

600

+850

250

1900

SW-01

PL-05

ST-01

Project

2000

2600

GL-05

THE LORD RAMA 9

SW-02

100

Drawing title

FFL.+0.000 157

600

157

1354 3180 (C.O.S)

157

600

157

195

600

390 1980 (C.O.S)

600

TYPICAL TOILET DETAIL ELEVATION 01,02 LEVEL 24,26-35

195

Date generated

01 -

ELEVATION SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4228

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600

CH.+2600

START POINT

START POINT FIXED

600

FIXED

400

START POINT

GL-05

1750

OWNERS : เจ้าของ

1650

1400

CT-05

:

ARCHITECTS : สถาปนิก

CT-05 GL-05

:

CT-05

CT-05

+1200

SW-01 DR-02B

DR-02B

SW-02

:

SW-01

MECHANICAL ENGINEERS :

SW-02 +850

1200

250

250

+850

SW-04

SCALE

-

มัณฑนากร

:

ภูมิสถาปนิก

600 600

836 3180 (C.O.S)

1172

100 340

1172

1:25

375

375

340

600 3530 (C.O.S)

900

600

ELEVATION

04

ELEVATION

03

INTERIOR DESIGNER :

Key Plan

600 544 1980 (C.O.S)

:

:

850

850

FFL.+0.000

FFL.+0.000 836

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

LANDSCAPE DESIGNER :

SW-04

วิศวกรงานระบบ

:

100

SW-04

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

SW-09

PL-05 1900

SW-09

2600

CT-05

JO-15

2200

2600

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

DR-02B

SCALE

-

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

25

600

50

600

:-

25

Consultant 1 Discipline

CH.+2600

CH.+2600

:-

START POINT

START POINT

600

600

Other Party 2 Responsibility

CT-05

1650

::::-

CT-05

GL-05

Client

::-

2600

2600

GL-05 JO-15

PL-05

SW-04

2000

100

ST-01

SW-04

Project

THE LORD RAMA 9

SW-06

1200

SW-03B

ST-01

250

1900

+850

::-

CT-05

SW-01

1900

SW-01 2000

::Other Party 1 Responsibility

1400 CT-05

::-

SW-03B SW-02

600

SW-02 ST-01

1500

600 3530 (C.O.S)

100

100

Drawing title

FFL.+0.000

FFL.+0.000 340

375

375

325

340

650

325

730 3530 (C.O.S)

1500

TYPICAL TOILET DETAIL ELEVATION 03-06 LEVEL 24,26-35 Date generated

05 -

ELEVATION SCALE

1:25

06 -

ELEVATION SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4229

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600

600

START POINT

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

CT-05

:

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

2600

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

DR-02B

:

2000

1900

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

SW-03B

ภูมิสถาปนิก

:

100

Key Plan

FFL.+0.000

2030

1500 3530 (C.O.S)

07 -

ELEVATION SCALE

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL TOILET DETAIL ELEVATION 07 LEVEL 24,26-35 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4230

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

01

02

ID-LR9-42XX

ID-LR9-42XX

20

600

50

600

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

20

CH.+2600 2790 (C.O.S)

START POINT

1400

FIXED

FIXED

SW-06

CT-05

2600

:

1: 20

0

2000

DR-02B ST-01

ST-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

100

ST-01

SW-06

+850

:

INTERIOR DESIGNER :

250

SW-03B

มัณฑนากร

:

LANDSCAPE DESIGNER :

SW-04

วิศวกรงานระบบ

:

ภูมิสถาปนิก

:

SW-04 SW-02

05 ID-LR9-42XX

850

O PE

1280

SL

ST-01

MECHANICAL ENGINEERS :

SW-02

Key Plan

600

GL-05 SW-02

DR-02B

1200

SW-01

650

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

2280 (C.O.S)

TOP.+1200

320

2290

ID-LR9-42XX

ST-01

CT-05

SW-03B

PL-05

FFL.+0.000

GL-05 SW-02

320

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

JO-15

FFL.+0000

03

SW-06

CT-05

SW-07

475

CT-05

400

836

475

500

320

425

320 154 2280 (C.O.S)

650

SW-06

836

ELEVATION SCALE

-

1:25

SW-07

SW-03B

ST-01

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

07 ID-LR9-42XX

925

SW-03B

TOP.+1200

TOP.+1200

CT-05 SW-06

SW-07

400

3530 (C.O.S)

01 CT-05

925

ARCHITECTS : สถาปนิก :

+1200

FL-02

1780 (C.O.S)

:

:

CT-05

SW-01

OWNERS : เจ้าของ

CT-05

FEMALE TOILET

ST-01 SW-09

ST-01

ID-LR9-42XX

SW-03B

CT-05

ST-01

CT-05

1000

1000

DR-02B

ST-01

04

1650

CT-05 PL-05

1750

TOP.+1200

CT-05

START POINT

1400

600

1389

ST-01 CT-05

0

CT-05

1: 20 E

Consultant 3 Discipline

OP

PL-05

MF. MF. MF. MF. MF. MF. App'd

:PL-05

SL

PL-05

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:CH.+2600

:START POINT

FL-02

ST-01

1750 (C.O.S)

:Other Party 2 Responsibility

::1400

475

TOP.+1200

475

JO-15

600

3530 (C.O.S)

FFL.+0000 START POINT CT-05

Consultant 1 Discipline

START POINT

SW-01

ST-01

08

SW-04

CT-05

ID-LR9-42XX

GL-05

CT-05

CT-05

ST-01

ST-01

CT-05

SW-02

GL-05

1650

CT-05

MALE TOILET

ID-LR9-42XX

600

06

DR-02B

855

855

Consultant 2 Discipline

+1200

2600

GL-05

::-

ST-01

SW-03B

GL-05

SW-03B

SW-06

+850

SW-03B SW-06

ST-01 ST-01

SW-06

850

ST-01

SW-02

600 2080 (C.O.S)

500

500

830 2280 (C.O.S)

-

TYPICAL TOILET DETAIL (23 FL.) : PLAN

-

SCALE

1:25

THE LORD RAMA 9

100

FFL.+0.000 1480

Project

SW-02 ST-01

100

::-

1200

475

475

SW-02

ST-01

100

ST-01

250

1900

SW-01 SW-04

::-

SW-01

2000

SW-01

JO-15

CT-05

Client

SW-09

600

800

1750

800

CT-05

SW-09 ST-01

Other Party 1 Responsibility

::-

ST-01 ST-01

::-

02 -

450

425

500

855

475

800

475

3530 (C.O.S)

ELEVATION SCALE

Drawing title

TYPICAL TOILET DETAIL : PLAN ELEVAEION 01.02 LEVEL 23 Date generated

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4231

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CH.+2600

CH.+2600

600

600

600

START POINT

1400

CT-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

2600

2600

CT-05

CT-05

:

200

ARCHITECTS : สถาปนิก :

ST-01

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

DR-02B

PL-05

1900

PL-05

2000

2000

PL-05

1900

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

SW-06

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

1200

SANITARY ENGINEERS :

SW-03B

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

FFL.+0.000 325

03

600

FFL.+0.000 1379

605

1400 2780 (C.O.S)

ELEVATION SCALE

-

150 600 2280 (C.O.S)

100

100

Key Plan

04 1:25

-

ELEVATION SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:-

CH.+2600

CH.+2600

Other Party 2 Responsibility

600

600

600

START POINT

CT-05

::::-

GL-05

::-

1650

1400

Other Party 1 Responsibility

::Client

CT-05

ST-01

::-

SW-09

PL-05

1900

SW-01

Project

PL-05

2000

100

SW-02

PL-05

THE LORD RAMA 9

+850

1200

250

SW-06

::-

DR-02B 1900

CT-05

2600

+1200

2600

200

FFL.+0.000 1400

Drawing title

100

100

600

850

SW-03B

FFL.+0.000 780

715

600

600

2780 (C.O.S)

05 -

ELEVATION SCALE

06 1:25

-

ELEVATION SCALE

1:25

150 2780 (C.O.S)

600

715

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

TYPICAL TOILET DETAIL ELEVAEION 03,04,05,06 LEVEL 23 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4232

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CH.+2600

CH.+2600

START POINT

1400

1650

1400

1400

START POINT

GL-05

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

CT-05

CT-05

ST-01

CT-05

200

2600

2600

200

ST-01

SW-09

:

CT-05 JO-15

ARCHITECTS : สถาปนิก :

100

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

DR-02B

:

1900

SW-01 SW-02 100

SANITARY ENGINEERS :

วิศวกรงานระบบ

1200

:

วิศวกรสุขาภิบาล

:

INTERIOR DESIGNER :

มัณฑนากร

850

:

LANDSCAPE DESIGNER :

600

SW-03B

MECHANICAL ENGINEERS :

250

+850

SW-06

SW-03B

:

SW-04

1200

1200

SW-06

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

ภูมิสถาปนิก

:

100

Key Plan

FFL.+0.000 1390

07 -

2780 (C.O.S)

ELEVATION SCALE

FFL.+0.000 600

1390

700

2780

08 1:25

1480

-

ELEVATION SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL TOILET DETAIL ELEVAEION 07,08 LEVEL 23 Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4233

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CT-05

OWNERS : เจ้าของ

CT-05 ST-01

ST-01

DR-02B

:

690

ST-01

ARCHITECTS : สถาปนิก

DR-02B

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

SW-01

SW-01

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

SW-02

MECHANICAL ENGINEERS :

SW-02

GL-05

GL-05

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

800

SW-09 ST-01

วิศวกรงานระบบ

:

:

ST-01 SW-09

INTERIOR DESIGNER :

มัณฑนากร

:

SW-01

LANDSCAPE DESIGNER :

SW-01 GL-05

SW-02

AHU.

3100

GL-05 SW-02

GL-05

ภูมิสถาปนิก

:

Key Plan

GL-05

06 ID-TYP-4237

800

3913

SW-09 ST-01

AHU.

ST-01 SW-09

GL-05

GL-05 SW-01

CT-05

SL

ID-TYP-4238

ID-TYP-4238

1:2

CT-05

00

SW-02 E OP

2 1:

SL

00 ST-01

04

ST-01 ST-01

CT-05

01

02

ID-TYP-4235

ID-TYP-4235

ID-TYP-4236

5880 (C.O.S)

07

SW-02

690

5880 (C.O.S)

08

OP E

SW-01

CT-05

PL-05

ST-01

PL-05

ST-01

CT-05

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

ST-01

:-

457

SW-06

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

Consultant 3 Discipline

SW-03

:-

923

SW-03

SW-04

Consultant 2 Discipline

:-

467

CT-05

Consultant 1 Discipline

120

SW-06 PL-05 ST-01

SW-06

CT-02

MALE TOILET

SW-03

SW-04

CT-02

FFL.+0000 1967

PL-05 ST-01

Client

ST-01

ST-01 SL

SL

OP E1

OP

E

SW-03

:20

SW-03

Project

PL-05

SW-06

1300 980

1500

3980 (C.O.S)

::-

457

1500

03 ID-TYP-4236

CT-05

1300

200

SW-04

1:2 00

PL-05

SW-06

0

::923

924

0 20 1:

Other Party 1 Responsibility

::-

467

SW-06

::-

::-

JO-15

PL-05

ST-01

E OP SL

05 ID-TYP-4237

SW-06

SW-06

SW-03

::-

467

FFL.+0000

2780

SW-03

933

923

FEMALE TOILET SW-03

Other Party 2 Responsibility

ST-01

ST-01

467

ST-01

:-

JO-15

PL-05

200

200

THE LORD RAMA 9

CT-05

1300

100

1500

2480 Drawing title

3980 (C.O.S)

TYPICAL TOILET DETAIL : PLAN LEVEL 36 Date generated

-

TYPICAL TOILET DETAIL ( 36 FL.) : PLAN

-

SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4234

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600

ST-01

ST-01

ST-01

ST-01

1650

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

GL-05

GL-05

GL-05

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

2600

PL-05

PL-05

PL-05

PL-05

PL-05

SW-09

:

SW-09

SW-01

MECHANICAL ENGINEERS :

SW-01

SW-01

วิศวกรงานระบบ

1930

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

ST-01

100

:

+850

INTERIOR DESIGNER :

มัณฑนากร

250

:

ST-01

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

850

Key Plan

SW-02

ST-01

SW-02

600

SW-02

100 651

148

652

484

120 163

600

327

600

5890 (C.O.S)

327

600

163

ELEVATION SCALE

148

-

651

01

376

FFL.+0.000

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:CH.+2600

Other Party 2 Responsibility

START POINT

::-

START POINT

600

::-

1400

Other Party 1 Responsibility

::Client

CT-05

2600

::-

CT-05

::::-

JO-15 DR-02B

+1200

Project

SW-04

SW-04

SW-04

1200

2000

THE LORD RAMA 9

Drawing title

TYPICAL TOILET DETAIL LEVEL 36, ELEVATION 01,02

FFL.+0.000 3EQ.=2800

3110 CHECK 5910 ON SITE

02 -

ELEVATION SCALE

1:25

Date generated

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4235

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

CH.+2600 START POINT

600

START POINT

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

2600

:

ST-01

ST-01

ST-01

MECHANICAL ENGINEERS :

PL-05

1900

2000

:

CT-05 1900

CT-05 SW-04

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

SW-06

SW-06

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

SW-03B

FFL.+0.000 100

2380

1290

200

200

1310

1310

3770 (C.O.S)

ELEVATION 1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

CH.+2600 START POINT

::-

START POINT

::Other Party 1 Responsibility

::::Client

1750

SCALE

GL-05

::-

GL-05

::-

CT-05

SW-09

SW-09

SW-01

SW-01

SW-02

Project

CT-05

THE LORD RAMA 9

SW-02

850

850

850

-

200

3585 (C.O.S)

2600

03

Key Plan

100

SW-03B

100

SW-03B

Drawing title

TYPICAL TOILET DETAIL LEVEL 36, ELEVATION 03,04 FFL.+0.000 Date generated

1390 2670 (C.O.S)

04 -

ELEVATION SCALE

1:25

100

100

1400 2680 (C.O.S)

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4236

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CH.+2600

CH.+2600 START POINT

START POINT

150

1400

600

150

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

CT-05

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

PL-05

ST-01

ST-01

PL-05 PL-05

CT-05

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

1900

1900

PL-05

2600

PL-05

ST-01

2000

+1200

2600

:

ST-01

SW-04

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

SW-06

SW-06

SW-06

INTERIOR DESIGNER :

มัณฑนากร

1200

:

LANDSCAPE DESIGNER :

SW-03B

SW-03B

SW-03B

ภูมิสถาปนิก

:

Key Plan

200

1300

200

8500 (C.O.S)

200

1300

FFL.+0.000 1200

100

ELEVATION SCALE

1:25 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::-

CH.+2600

::-

START POINT

400

START POINT

Other Party 1 Responsibility

::::Client

::CT-05

GL-05

GL-05

SW-09

SW-09

SW-01

SW-01

CT-05

::Project

+1200

2600

THE LORD RAMA 9 SW-02

250

SW-02

850

Drawing title

TYPICAL TOILET DETAIL LEVEL 36, ELEVATION 05,06

600

850

-

1300

2200

05

100

100

FFL.+0.000

FFL.+0.000

Date generated

500 2590 (C.O.S)

06 -

ELEVATION SCALE

1:25

100

100

500

2670 (C.O.S)

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4237

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

600

CH.+2600 CT-05

CT-05

ST-01

ST-01

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

ST-01

:

ARCHITECTS : สถาปนิก :

1650

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

GL-05

GL-05

GL-05

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

PL-05

PL-05

PL-05

PL-05

PL-05

SW-09

SW-09 SW-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

SW-01

INTERIOR DESIGNER :

1900

SW-01

มัณฑนากร

:

100 SW-02

Key Plan

SW-02

100

ST-01

ภูมิสถาปนิก

:

600

ST-01

SW-02

LANDSCAPE DESIGNER :

250

ST-01

+850 FFL.+0.000

2990

120 163

600

327

600

327

600

163

CHECK 5890 ON SITE

07

SCALE

-

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

ELEVATION 1:25

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:CH.+2600

Other Party 2 Responsibility

::-

START POINT

600

::Other Party 1 Responsibility

1400

::::Client

CT-05

::PL-05

PL-05 CT-05

2600

PL-05

DR-02B

::Project

1200

2000

THE LORD RAMA 9

Drawing title

FFL.+0.000

2000

2600

:

163

600

327

600

287

3923

Date generated

5890 (C.O.S)

08 -

ELEVATION SCALE

1:25

TYPICAL TOILET DETAIL : LEVEL 36, ELEVATION 07,08

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE. WILL AFFECT TILE SET-OUT AND QUANTITY.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4238

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 2679 ON SITE

CHECK 3730 ON SITE

100

100

CH.+2750

FULL HEIGHT PARTITION

CH.+2700

09 ID-TYP-5301

CL-02 CH.+2600

OWNERS : เจ้าของ

04

:

ARCHITECTS : สถาปนิก

ID-TYP-5301

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

CL-02 CH.+2600

:

MECHANICAL ENGINEERS :

1927

100

90

872

CH.+2700

CL-02

08

°

10

ID-TYP-5301

CH.+2600

CH.+2600

100

ภูมิสถาปนิก

:

Key Plan

590

590

CL-02 CH.+2600

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

120

300

A

CL-02

09

CL-02

CH.+2600

ID-TYP-5301

CH.+2600

597

CL-01

LANDSCAPE DESIGNER :

100

CH.+2700

CH.+3000

มัณฑนากร

:

850

CL-02

0

60

09

INTERIOR DESIGNER :

42°

1040

CL-02

CH 10

0 10

ID-TYP-5301

:

0

89°

CL-02 CH.+2600

0 70 .+2

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

10

CH.+2600

วิศวกรงานระบบ

:

CHECK 3130 ON SITE

FULL HEIGHT PARTITION

200

FULL HEIGHT PARTITION

1380 CHECK 3130 ON SITE

100

100

100

100

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

940

:-

100

1000 CH.+2700

Consultant 2 Discipline

:Consultant 1 Discipline

CL-02

08

CH.+2600 7 .+2

CL-02 60

°

100

100

100

100

CHECK 3480 ON SITE

10

5 30

ID-TYP-5301

CL-02 CH.+2600

0

08

CL-02 CH.+2600

10

0 10

Other Party 2 Responsibility

CH

90°

CH.+2600

:-

ID-TYP-5301

00

CHECK 3480 ON SITE

ID-TYP-5301

1372

1970

08

CH.+2700 2450

2120

1160

800

::::Other Party 1 Responsibility

::::Client

::::Project

1511

CL-02 1510

CH.+2600

THE LORD RAMA 9

04

CH.+2750

200

ID-TYP-5301

Drawing title

REFLECTED CEILING PLAN PUBLIC TOILET DETAIL (B1 FL.) -

CHECK 6530 ON SITE

Date generated

-

PUBLIC TOILET DETAIL (B1 FL.) : REFLECTED CEILING PLAN

-

SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4239

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

7

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 9450 ON SITE 930

CH.+2700

910

2086

100

2013

CH.+2700 42°

30 °

09

CL-02

ID-TYP-5301

08

CH.+2600

0 70

ID-TYP-5301

.+2

CH

CL-02

CH.+2600

CH.+2600

09

10

CL-02

+2

CL-02

70

0

OWNERS : เจ้าของ

CH.+2600

:

100

ARCHITECTS : สถาปนิก :

CH.+2700 1595

CH.+2700

CHECK 2980 ON SITE

100

5 23

ID-TYP-5301

CH .

100

60

°

0 10

0 10

CL-02

42°

89°

2168

2234

944

CL-02 CH.+2600 CH.+2700

CH.+2600

09

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

CL-02

มัณฑนากร

:

LANDSCAPE DESIGNER :

CH.+2600

ภูมิสถาปนิก

:

1750

ID-TYP-5301

CHECK 2730 ON SITE

2761

0

100

10

650

Key Plan

04

200

ID-TYP-5301

200

100

CH.+2750

CH.+2750

100

04

2590

CL-02 CH.+2600

CHECK 1900 ON SITE

CH.+2700

A

CH.+2700

ID-TYP-5301

CL-02 CH.+2600

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:-

09

Consultant 1 Discipline

ID-TYP-5301

1440

100

1138

680

370

1270

100

100

°

80

30°

CH.+3000

Other Party 2 Responsibility

::-

42°

CH.+2700

CL-01

:-

970 100

240 100

::Other Party 1 Responsibility

61

°

48°

CL-02

CL-02

CL-02

CH.+2600

CH.+2600

10 0

37

09

10

ID-TYP-5301

100 225

1620

0

CH.+2600

0

CL-02

::-

1255

.+ 2

70

10

0 10

CH

ID-TYP-5301

CHECK 2180 ON SITE

CH.+2600

7

0

+2

. CH

CL-02

865

08

00

100

CH.+2600

::Client

::::Project

CH.+2700 395

2190

1993

THE LORD RAMA 9

09 ID-TYP-5301

600

CL-02 CH.+2700

100100

CH.+2600

Drawing title

100 1080

2580

2630 CHECK 6530 ON SITE

REFLECTED CEILING PLAN PUBLIC TOILET DETAIL (01, 07 FL.) Date generated

-

PUBLIC TOILET DETAIL (01, 07 FL.) : REFLECTED CEILING PLAN

-

SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4240

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

7

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8 CHECK 9430 ON SITE

100

2003

6605

200

602

600

CH.+2750

09 ID-TYP-5301

OWNERS : เจ้าของ

CH.+2700

:

ARCHITECTS : สถาปนิก

1300

CL-02 CH.+2600

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

09

:

2328 100

436

CH.+2700

CH.+2600 42°

° 60

° 80

2380

535

CL-02 CH.+2700

CL-02 CH.+2600

2598

7 .+2

09

08

00

CL-02

ID-TYP-5301

CH

ID-TYP-5301

27

CL-02

CH.+2600

CH.+2600

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

00

0

60

°

0

10

CL-02

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

1530

.+

89°

0 10

CH.+2600

CH

วิศวกรงานระบบ

:

1230

CL-02 CH.+2600

CHECK 3330 ON SITE

708

MECHANICAL ENGINEERS :

30°

CHECK 3330 ON SITE

ID-TYP-5301

10

04 51

10

100

CH.+2700

600

CL-02

ID-TYP-5301

CH.+2600

CH.+2600 1505

867

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

1110

712

100

:Consultant 2 Discipline

CH.+2700 80

30°

CL-02

°

CL-02

:-

42°

Other Party 2 Responsibility

+2

70

0

CL-02

CL-02

CH.+2600

CH.+2600

0

09

5 35

ID-TYP-5301

100

60

°

0 10

10

CH.+2600

CH.+3000

ID-TYP-5301

CH

:-

CH .

1380

1180

CL-02

CL-01

08

0 70 .+2

89°

Consultant 1 Discipline

CH.+2600

CH.+2600

CHECK 3480 ON SITE

A

09

CL-02

600

390

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

100100

350

8

ID-TYP-5301

° 00

1

100

CH.+2700 1570

2075

1840

100

::::Other Party 1 Responsibility

::::Client

::-

1500

CL-02 CH.+2600

1300

::Project

THE LORD RAMA 9

09

CH.+2750

200

ID-TYP-5301

Drawing title

REFLECTED CEILING PLAN PUBLIC TOILET DETAIL (02-06 FL.)

CHECK 6530 ON SITE

Date generated

-

PUBLIC TOILET DETAIL (02-06 FL.) : REFLECTED CEILING PLAN

-

SCALE

1:25

NOTE: · WALL THICKNESSES SHOWN ARE FINISHED DIMENSIONS INCLUDING FINISHES. · WATER CLOSET SELECTION HAS BEEN CHANGED TO EXPOSED CISTERNS * RCP'S THAT IS SUBJECT TO ADJUSTMENT DUE TO BEAM CONDITION ON SITE.

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-4241

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL

℄ NOTE : FOR AREA WITHOUT CEILING CONTRACTOR TO PROVIDE GYPSUM WALL FROM CEILING TO UNDERSIDE OF SLAB

NOTE : FOR AREA WITHOUT CEILING CONTRACTOR TO PROVIDE GYPSUM WALL FROM CEILING TO UNDERSIDE OF SLAB

CL CONCRETE SLAB.

CEILING LEVEL

10

10

CONCRETE SLAB. METAL STUD. AT 600 C/C

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

CEILING LEVEL

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

CEILING FINISHED

10

10

CEILING FINISHED

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

10 MM. SATIN ALUMINIUM SHADOWLINE WALL ANGLE TO SCHEDULED FINISH.

10 MM. SATIN ALUMINIUM SHADOWLINE WALL ANGLE TO SCHEDULED FINISH.

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL METAL STUD. AT 600 C/C

METAL STUD. AT 600 C/C ROCKWOOL INSULATION AS SCHEDULED

12 MM. THK. GUPSUM PLASTER BOARD MOISTURE RESISTANCE FINISHED AS SCHEDULED.

12 MM. THK. GUPSUM PLASTER BOARD MOISTURE RESISTANCE FINISHED AS SCHEDULED.

Key Plan

ROCKWOOL INSULATION AS SCHEDULED

12 MM. THK. GUPSUM PLASTER BOARD MOISTURE RESISTANCE FINISHED AS SCHEDULED.

12 MM. THK. GUPSUM PLASTER BOARD MOISTURE RESISTANCE FINISHED AS SCHEDULED.

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:METAL STUD. AT 600 C/C CONTRACTOR TO PROVIDE EXTRA STEEL SUPPORT WHERE JOINERY WORKS TO BE INSTALLED.

Consultant 2 Discipline

METAL STUD. AT 600 C/C CONTRACTOR TO PROVIDE EXTRA STEEL SUPPORT WHERE JOINERY WORKS TO BE INSTALLED.

:Consultant 1 Discipline

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL

EXPANSION BOLT 6MM. @ 600MM.

EXPANSION BOLT 6MM. @ 600MM.

100 MM. HIGH SKIRTING TO MATCH FLOOR FINISH REFER SCHEDULE

FFL.

DOTTED LINE SHOW FLOOR FINISH AS SCHEDULED

100

DOTTED LINE SHOW FLOOR FINISH AS SCHEDULED

100

:-

100 MM. HIGH SKIRTING TO MATCH FLOOR FINISH REFER SCHEDULE

FFL.

Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::-

CONCRETE SLAB.

CONCRETE SLAB.

100

100

PL-01 TYPICAL PARTITION DETAIL -

SCALE

1:5

::Project

THE LORD RAMA 9

PL-02 TYPICAL PARTITION DETAIL -

SCALE

1:5 Drawing title

TYPICAL PARTITION DETAIL TYPE PL:01,PL:02 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5101

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

CONTINUOUS SEALANT FOR ACOUSTICAL SEAL BACKING ROD & SILICONE SEALANT

CL

METAL STUD. AT 600 C/C

CL

CONCRETE SLAB.

CONCRETE SLAB

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

CEILING LEVEL

:

CEILING LEVEL

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

10

10

10

FINISHED CEILING

10

CEILING FINISHED

ภูมิสถาปนิก

:

Key Plan

10 MM. SATIN ALUMINIUM SHADOWLINE WALL ANGLE TO SCHEDULED FINISH.

10 MM. SATIN ALUMINIUM SHADOWLINE WALL ANGLE TO SCHEDULED FINISH.

METAL STUD. AT 600 C/C 2 LAYERS OF 13 MM.THK. FIRE STOP BOARD EACH SIDE

METAL STUD. AT 600 C/C

15MM. THK. CEMENT RENDER FINISHED AS SCHEDULED

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

ROCKWOOL INSULATION AS SCHEDULED

BRICK WALL MOISTURE RESISTANCE FINISHED AS SCHEDULED.

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

100 MM. HIGH SKIRTING TO MATCH FLOOR FINISH REFER SCHEDULE

DOTTED LINE SHOW FLOOR FINISH AS SCHEDULED

USE 12MM. THK. CEMENTBOARD AT BOTTOM PART OF PARTITION

::-

100 MM. HIGH SKIRTING TO MATCH FLOOR FINISH REFER SCHEDULE

::::Client

::50

FFL.

50

FFL.

::Other Party 1 Responsibility

100

100

DOTTED LINE SHOW FLOOR FINISH AS SCHEDULED

METAL STUD. AT 600 C/C

::Project

PL-03 -

CONCRETE SLAB.

CONCRETE SLAB.

100

100

TYPICAL PARTITION DETAIL SCALE

1:5

PL-04 -

THE LORD RAMA 9

TYPICAL PARTITION DETAIL

Drawing title

SCALE

TYPICAL PARTITION DETAIL TYPE PL-03,PL-04 -

1:5

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5102

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

7423

FLOOR FINISH

SCREW SUPPORT

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

45 (TBC)

10

COLUMN

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

EQ

10

FLOOR FINISH

EQ

:

60 (TBC)

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

10 MM.THK. TEMPERED CLEAR GLASS

COLUMN

:

MECHANICAL ENGINEERS :

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

:

C -

EQ

01

LAYOUT PLAN DETAIL SCALE

1:5

B

1:25

1200

1190

1200

Key Plan

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

1200

1200

1200

VARIES

10 MM. THK. TEMPERED CLEAR GLASS

100

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

FLOOR FINISH AS SCHEDULED

FFL.+00MM.

120

120

FFL.+00MM.

100

10 MM. THK. TEMPERED CLEAR GLASS

900

900

HANDRAIL STANLESS STEEL HAIRLINE

Consultant 3 Discipline

H.+1000MM. HANDRAIL STANLESS STEEL HAIRLINE

1000

100

H.+1000MM.

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

15

::::Other Party 1 Responsibility

138

LED ADVERTISING LED ADVERTISING SIGNAGE SCOOP ( SEE DETAIL IN GRAPHIC PACKAGE )

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

::-

VERIES

1000

ภูมิสถาปนิก

:

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

7423 VARIES

LANDSCAPE DESIGNER :

10 MM. THK. TEMPERED CLEAR GLASS

EQ

LAYOUT PLAN SCALE

-

มัณฑนากร

:

HANDRAIL STAINLESS STEEL HAIRLINE

EQ

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : INTERIOR DESIGNER :

EQ

วิศวกรงานระบบ

:

SCREW FASTENED WITH AN CHORDS ALUMINUM PROFILE

::Client

::::Project

02 -

ELEVATION SCALE

B 1:25

-

THE LORD RAMA 9

SECTION DETAIL B SCALE

1:25

Drawing title

TYPICAL PARTITION DETAIL TYPE PL-07 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5107

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8500

8500

A-1637

A-1637

A-1637

A-1637

8500

8500

8500

85000 8500

8500

8500

A-1637

MALE

A-1637

A-1637

A-1637

1

2

27

28

3

4

5

A-1637

1000

A-1637

FEMALE

C2 C1

C2

C1

ID-TYP-4211

Shaft

MEP

DN

MEP

Shaft

JO-02

RENTABLE AREA 8500

662.48 sq.m.

ID-TYP-7002

UP

MEP

DN

FHC.

Shaft

BIN

LIFT

RECYCLE

OPEN TO BELOW

C1

C1

C2

C3

ID-TYP-5402

ID-TYP-5403

C1

ID-TYP-4002 UP

CORRIDOR

C1 ID-TYP-5401

FLOOR FINISH

CONTROL POINT ACCESS

C2

C3 LIFT

OPEN

DN

LIFT HALL UP

8500

27500

SCREW SUPPORT

ESCALATOR DETAIL

ID-TYP-4001

CORRIDOR AREA 345.76 sq.m.

RAMP

15 45 (TBC)

CONTROL POINT ACCESS

C1

C2

C3

CORRIDOR

10

C1

8500

UP

FHC.

C1

87.51 sq.m.

DN

RENTABLE AREA

10

MEP Shaft

OPEN TO BELOW

64

60 (TBC)

1000

63

65

66

67

RMU.1 / MEA ROOM

10 MM.THK. TEMPERED CLEAR GLASS

OWNERS : เจ้าของ

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

FURNITURE LAYOUT PLAN 2 FL. SCALE

C

1:500

-

LAYOUT PLAN DETAIL SCALE

1:5

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

11162 VARIES

10

1200

10

1200

10

1200

10

1200

10

1200

10

1200

10

1200

10

VARIES

300

FLOOR FINISH

1223

01

UP

UP

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:-

400

02

Consultant 2 Discipline

:Consultant 1 Discipline

VOID

:-

1223

Other Party 2 Responsibility

DN

DN

::::Other Party 1 Responsibility

::::-

300

-

3446

A

Client

::-

FLOOR FINISH

VARIES

10

1200

10

1200

10

1200

10

1200

10

1200

10

1200

10

1200

10

VARIES

::Project

11162

THE LORD RAMA 9 10 MM. THK. TEMPERED CLEAR GLASS ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER Drawing title

-

LAYOUT PLAN 1 FL.-6 FL.

-

SCALE

1:30

TYPICAL PARTITION ESCALITOR DETAIL TYPE PL-07 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:30 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5108

A

Status

FOR CONSTUCTION


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8500

8500

A-1637

A-1637

A-1637

A-1637

8500

8500

8500

85000 8500

8500

8500

A-1637

MALE

A-1637

A-1637

A-1637

1

2

27

28

3

4

5

A-1637

1000

A-1637

FEMALE

C2 C1

C2

C1

ID-TYP-4211

Shaft

MEP

DN

MEP

Shaft

JO-02

RENTABLE AREA 8500

662.48 sq.m.

ID-TYP-7002

UP

MEP

DN

FHC.

Shaft

BIN

LIFT

RECYCLE

OPEN TO BELOW

C1

C1

C2

C3

ID-TYP-5402

ID-TYP-5403

C1

ID-TYP-4002 UP

CORRIDOR

C1 ID-TYP-5401

FLOOR FINISH

CONTROL POINT ACCESS

C2

C3 LIFT

OPEN

DN

LIFT HALL UP

8500

27500

SCREW SUPPORT

ESCALATOR DETAIL

ID-TYP-4001

CORRIDOR AREA 345.76 sq.m.

RAMP

15 45 (TBC)

CONTROL POINT ACCESS

C1

C2

C3

CORRIDOR

10

C1

8500

UP

FHC.

C1

87.51 sq.m.

DN

RENTABLE AREA

10

MEP Shaft

OPEN TO BELOW

64

60 (TBC)

10 MM.THK. TEMPERED CLEAR GLASS

1000

63

65

66

67

RMU.1 / MEA ROOM

OWNERS : เจ้าของ

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

FURNITURE LAYOUT PLAN 2 FL. SCALE

C

1:500

-

LAYOUT PLAN DETAIL SCALE

1:5

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

B

ภูมิสถาปนิก

:

Key Plan

TOP ALUMINUM FRAME

11162 VARIES

1200

1200

1200

1200

1200

1200

1200

VARIES

1000

H.+1000MM.

FLOOR AS SCHEDULE FINISH

100

FFL.+00MM.

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

MF. MF. MF. MF. MF. MF. App'd

:Consultant 3 Discipline

:Consultant 2 Discipline

WALL AS SCHEDULE FINISH

01 -

ELEVATION SCALE

1:35

10 MM. THK. TEMPERED CLEAR GLASS

:-

CT-02 CERAMIC WHITE MARBLE

Consultant 1 Discipline

:-

ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

Other Party 2 Responsibility

::::Other Party 1 Responsibility

1547

::-

TOP ALUMINUM FRAME

1346

::-

1000

Client

15

H.+1000MM.

H.+1000MM.

::::Project

FLOOR AS SCHEDULE FINISH

THE LORD RAMA 9

10 MM. THK. TEMPERED CLEAR GLASS

1000

1000

FLOOR FINISH AS SCHEDULED DN

FFL.+00MM.

120

FFL.+00MM.

138

Drawing title

VERIES

-

100

A

EQ

10

EQ

SCREW FASTENED WITH AN CHORDS ALUMINUM PROFILE

VARIES

TYPICAL PARTITION ESCALITOR DETAIL TYPE PL-07 Date generated

27/03/20

3446

Drawn

Checked

Approved

-

-

MF.

Scale

WALL AS SCHEDULE FINISH

02 -

ELEVATION SCALE

1:35

10 MM. THK. TEMPERED CLEAR GLASS ALUMINUM PROFILE FOR GLASS BALUSTRADE DIMENSION AND INSTALLATION TO BE COORDINATE WITH SUPPLIER

1:30 @ A2 sheet size Project number

B -

35 mm. on original Drawing number

Revision

ID-TYP-5109

A

SECTION DETAIL B

7948

SCALE

FOR CONSTUCTION

1:35

Status


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

2 MM. THK. L SHAPE STAINLESS STEEL

2 MM. THK. L SHAPE STAINLESS STEEL

BOUNDARY LINE

REFER TO ARCHITECTURAL DRAWING

CERAMIC TILE AS SCHEDULED

CERAMIC TILE AS SCHEDULED

CERAMIC TILE AS SCHEDULED

FLOOR STRUCTURE LEVEL

20 30

SERVICE AREA

30

CEMENT SCREED

50

50

50 30

TENNANT AREA

CERAMIC TILE AS SCHEDULED

FLOOR FINISH LEVEL

20

FLOOR FINISH LEVEL

20

FLOOR FINISH LEVEL

2 MM. THK. L SHAPE STAINLESS STEEL

CEMENT SCREED

FLOOR STRUCTURE LEVEL

CEMENT SCREED

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

CEMENT SCREED

:

ARCHITECTS : สถาปนิก

FLOOR STRUCTURE LEVEL

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

EXTERIOR CONCRETE SLAB

EXTERIOR CONCRETE SLAB

:

EXTERIOR CONCRETE SLAB

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

01 -

TYPICAL FLOOR DETAIL SCALE

02

1:2

-

TYPICAL FLOOR DETAIL SCALE

03

1:2

-

SCALE

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

TYPICAL FLOOR DETAIL

:

1:2

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

WALL FINISHED AS SCHEDULED

Key Plan

ALIGN

6 MM. THK. STAINLESS STEEL INLAY

CERAMIC TILE AS SCHEDULED

CERAMIC TILE AS SCHEDULED

CERAMIC TILE AS SCHEDULED

CEMENT SCREED

FLOOR STRUCTURE LEVEL

20 50

CEMENT SCREED

CEMENT SCREED

FLOOR STRUCTURE LEVEL

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

30

50

20

FLOOR FINISH LEVEL

30

50 30

CEMENT SCREED

SKIRTING AS SCHEDULED

FLOOR DUST TO BE CONFIRM BY OWNER

FLOOR FINISH LEVEL

20

FLOOR FINISH LEVEL

CERAMIC TILE AS SCHEDULED

100

2 MM. THK. L SHAPE STAINLESS STEEL

DOTTED LINE OF DOOR PANEL

CEMENT SCREED

FLOOR STRUCTURE LEVEL

:Consultant 2 Discipline

:Consultant 1 Discipline

EXTERIOR CONCRETE SLAB

EXTERIOR CONCRETE SLAB

EXTERIOR CONCRETE SLAB

:Other Party 2 Responsibility

04 -

TYPICAL FLOOR DETAIL SCALE

1:2

05 -

TYPICAL FLOOR DETAIL SCALE

1:2

06 -

TYPICAL FLOOR DETAIL SCALE

1:2

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL SECTION FLOORING DETAIL Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:2 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5201

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TYPICAL SECTION CEILING DETAIL PAINT FINISHED IN BLACK COLOR

PAINT FINISHED IN BLACK COLOR

PAINT FINISHED IN BLACK COLOR

CEILING LEVEL

SAG./RAG.

TENNANT

SAG./RAG.

CEILING LEVEL 50

CEILING LEVEL

CEILING LEVEL

50

150

ROLLER SHUTTER SPECIFICATION BY M&E

CEILING LEVEL

CEILING LEVEL

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

10

:

100

300

30

100

200

30

100

200

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

RECESSED DOWN LIGHT NOT EXCEED 200MM.

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

GRILL AIR NOT EXCEED 200MM.

PAINT FINISHED IN WHITE COLOR

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

01 -

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER

TYPICAL SECTION CEILING DETAIL SCALE

1:5

02A -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

02B -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER

SANITARY ENGINEERS :

** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

INTERIOR DESIGNER :

วิศวกรสุขาภิบาล

:

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

50 CEILING LEVEL 50 PAINT FINISHED IN WHITE COLOR 150

SAG/RAG

CEILING LEVEL

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

SAG./RAG.

30

PAINT FINISHED IN WHITE COLOR

30

100

CEILING LEVEL

CEILING LEVEL

CEILING LEVEL

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

250

100

30

200

:-

80

Consultant 2 Discipline

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

PAINT FINISHED IN WHITE COLOR

:Consultant 1 Discipline

:03 -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER ** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

04 -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER ** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

05 -

** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

TYPICAL SECTION CEILING DETAIL SCALE

1:5

Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::-

H.+3300 CEILING LEVEL

Project

50

150

PAINT FINISHED IN WHITE COLOR

THE LORD RAMA 9

CEILING LEVEL PAINT FINISHED IN WHITE COLOR

CEILING LEVEL

50

30

30

100

SAG./RAG.

CEILING LEVEL

30

Drawing title

H.+2400

PAINT FINISHED IN WHITE COLOR

300

PAINT FINISHED IN WHITE COLOR

50

150

PAINT FINISHED IN WHITE COLOR

GROOVE LINE 10MM.

100

PAINT FINISHED IN WHITE COLOR

TYPICAL SECTION CEILING DETAIL -

30

PAINT FINISHED IN WHITE COLOR

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5

06 -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER ** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

07 -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK SAG./RAG. LOCATION CONFIRM BY LIGHTING DESIGNER

08 -

TYPICAL SECTION CEILING DETAIL SCALE

1:5

** REMARK LIGHTING SPECIFICATION BY LIGHTING DESIGNER

@ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5301

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

01

01

01

75

OWNERS : เจ้าของ :

02

10

1650 (VARIES)

1650 (VARIES)

750

745

75

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

745

:

750

1000

1150 (VARIES)

LED STRIP

75

LED STRIP

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

75

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

75

75

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : LED STRIP

:

LED STRIP

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

1000

75

75

C1 -

75

C2

1:25

-

C3

1:25

675

75

Key Plan

1650 (VARIES)

TYPICAL COLUMN DETAIL / PLAN SCALE

150

675

1650 (VARIES)

TYPICAL COLUMN DETAIL / PLAN SCALE

75

1500

1150 (VARIES)

-

TYPICAL COLUMN DETAIL / PLAN SCALE

1:15

CEILING LEVEL

CEILING LEVEL

10 MM.SHADOW LINE

10 MM.SHADOW LINE

CEILING LEVEL

CEILING LEVEL

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

VARIES

75

ภูมิสถาปนิก

:

10 MM.SHADOW LINE

10 MM.SHADOW LINE

Consultant 3 Discipline

:Consultant 2 Discipline

9MM.THK. GYPSUM PLASTER BOARD WITH METAL STUD COLOR FINISHED AS SCHEDULED

:-

9MM.THK. GYPSUM PLASTER BOARD WITH METAL STUD COLOR FINISHED AS SCHEDULED

GLASS JOINT

GLASS JOINT

Consultant 1 Discipline

:-

VARIES

2500

::::-

STAINLESS FINISH

1900

VARIES

2500

6 MM. THK. MDF. BOARD W/ 5MM.THK.MIIROR FINISH AS SCHEDULED

STAINLESS FINISH

Other Party 1 Responsibility

::-

COLOR FINISHED AS SCHEDULED

::Client

::-

25

1100

100 50

FFL.+00MM.

FFL.+00MM.

25

25

1600

1150 (VARIES)

25

SKRITING FINISH AS SCHEDULED 100

SKRITING FINISH AS SCHEDULED

SKRITING FINISH AS SCHEDULED 100 50

VARIES

Other Party 2 Responsibility

6 MM. THK. MDF. BOARD W/ 5MM.THK.MIIROR FINISH AS SCHEDULED

SKRITING FINISH AS SCHEDULED

FFL.+00MM.

25

725

150

725

25

::Project

FFL.+00MM.

25

795

10

795

THE LORD RAMA 9

25

1650 (VARIES) 1650

1650 Drawing title

01 -

ELEVATION SCALE

1:25

01 -

ELEVATION SCALE

1:25

01 -

ELEVATION SCALE

1:25

02 -

ELEVATION SCALE

1:25

TYPICAL COLUMN DETAIL C1 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:15 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-5401

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

TOILET

INSIDE

OUTSIDE

TOILET

OUTSIDE 18

900

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OUTSIDE 18

18

18

900

800

936

836

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

DR-01

PLAN

PLAN DR-02A

:

PLAN DR-02B

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

01

1

1

ID-LR9-6301

ID-LR9-6302

ID-LR9-6302

CEILING LEVEL

CEILING LEVEL

VARIES

ID-LR9-6302

FIXED

100

DOOR CLOSER SEE IN DOOR HARDWARE SCHEDULE

100

2

VARIES

2

VARIES

CEILING LEVEL

ID-LR9-6302

FIXED

100

DOOR CLOSER SEE IN DOOR HARDWARE SCHEDULE

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

3 ID-LR9-6302

2

2

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

DOOR PULL HANDLE SEE IN DOOR HARDWARE SCHEDULE

FFL.

FFL.

100

FFL.

DOOR PULL HANDLE SEE IN DOOR HARDWARE SCHEDULE

:Consultant 1 Discipline

:-

18 18 900

18

::::Other Party 1 Responsibility

100

1000

Consultant 3 Discipline

Other Party 2 Responsibility

GLASS DOOR HINGE SEE IN DOOR HARDWARE SCHEDULE

18

18

::-

900

800

::-

936

836

Client

936

DR-01

:-

Consultant 2 Discipline

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

10mm.THK. CLEAR TEMPERED GLASS DOOR

18

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

2000

DOOR HANDLE SEE DOOR HARDWARE SCHEDULE

2200

2000

ID-LR9-6302

2200

2000

ID-LR9-6301

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

::-

ELEVATION

DR-02A

ELEVATION

DR-02B

ELEVATION

::Project

THE LORD RAMA 9

SINGLE SWING SOLID DOOR WITH ALUMINUM FRAME

DOOR TYPE

SINGLE SWING SOLID DOOR WITH ALUMINUM FRAME

DOOR LOCATION

TOILET

DOOR LOCATION

TOILET

DOOR FRAME

-

ALUMINUM FRAME SEE ALLOY SYSTEM DETAILS

ALUMINUM FRAME SEE ALLOY SYSTEM DETAILS

DOOR PANEL

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

MATERIAL

DOOR FRAME

10 MM. THK CLEAR TEMPERED GLASS

MATERIAL

DOOR FRAME

DOOR PANEL

DOOR PANEL

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

DOOR FRAME

-

DOOR PANEL

REFER A4 SPEC

DOOR FRAME

ALUMINIUM FRAM BY ALLOY

DOOR PANEL

REFER A4 SPEC

FINISH

DOOR TYPE

GENERAL AREA

FINISH

SINGLE SWING FRAMLESS GLASS DOOR

DOOR LOCATION

FINISH

DOOR TYPE MATERIAL

Drawing title

DOOR FRAME

ALUMINIUM FRAM BY ALLOY

DOOR PANEL

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

1 : 25

02A

DR-02A 1 : 25

02B

DR-02B 1 : 25

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size

REFER A4 SPEC

DR-01

Date generated

27/03/20

DOOR HARDWARE TYPE

01

TYPICAL DOOR DETAIL DR-01,DR-02A,DR-02B

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6201

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

TOILET 1200

SHAFT SERVICE

STAFF ROOM 1100 1136

18

OUTSIDE

OUTSIDE

18

900

OWNERS : เจ้าของ

936

:

ARCHITECTS : สถาปนิก

CORRIDOR 35

930 1000

:

35

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

PLAN DR-03

PLAN DR-04

:

PLAN DR-05

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

1200

1 1

ID-LR9-6302

ID-TYP-6303

CEILING LEVEL

CEILING LEVEL

20

CEILING LEVEL

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

100

100

2

2

ID-TYP-6303

ID-LR9-6302

1000

DOOR LOCK SET SEE IN DOOR HARDWARE SCHEDULE

100

2EQ.=930

FFL.

35

Consultant 3 Discipline

:Consultant 1 Discipline

Other Party 2 Responsibility

DOOR PULL HANDLE SEE IN DOOR HARDWARE SCHEDULE

FFL. 35

:-

:-

DOOR PULL HANDLE SEE IN DOOR HARDWARE SCHEDULE

FFL.

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

Consultant 2 Discipline

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

1500

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:-

2200

1900

2200

43mm.THK. HOLLOW CORE PLASTWOOD OPENING OPENING PUSH AND PULL SYSTEM W/ SPAY PAINT FINISH

2000

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

18

1000

1100

::::Other Party 1 Responsibility

18

18

1136

18

::-

900

::-

936

Client

::DR-03

ELEVATION

DR-04

ELEVATION

DR-05

ELEVATION

::Project

THE LORD RAMA 9

DOOR TYPE

SINGLE SWING SOLID DOOR WITH ALUMINUM FRAME

DOOR LOCATION

SERVICE SHAFT

DOOR LOCATION

TOILET HANDICAP

DOOR LOCATION

STAFF ROOM

DOOR FRAME

-

ALUMINUM FRAME SEE ALLOY SYSTEM DETAILS

ALUMINUM FRAME SEE ALLOY SYSTEM DETAILS

DOOR PANEL

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

MATERIAL

DOOR FRAME

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

MATERIAL

DOOR FRAME

DOOR PANEL

DOOR PANEL

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

DOOR FRAME

-

DOOR PANEL

REFER A4 SPEC

DOOR FRAME

ALUMINIUM FRAM BY ALLOY

DOOR PANEL

REFER A4 SPEC

FINISH

SINGLE SLIDING SOLID DOOR WITH ALUMINUM FRAME

FINISH

DOOR TYPE

FINISH

DOUBLE SWING SOLID DOOR WITH ALUMINUM FRAME

MATERIAL

Drawing title

DOOR TYPE

DOOR FRAME

ALUMINIUM FRAM BY ALLOY

DOOR PANEL

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

1 : 25

04

DR-04 1 : 25

05

DR-05 1 : 25

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size

REFER A4 SPEC

DR-03

Date generated

27/03/20

DOOR HARDWARE TYPE

03

TYPICAL DOOR DETAIL DR-03,DR-04,DR-05 -

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6202

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

AHU OFFICE AREA

OFFICE AREA

OUTSIDE

OUTSIDE

1000

1000

CORRIDOR 4EQ.=2400

50

OWNERS : เจ้าของ

1000

:

ARCHITECTS : สถาปนิก

2000

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

50

:

2500

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

PLAN DR-06

PLAN DR-07

:

PLAN DR-08

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

1

1

ID-TYP-6304

ID-TYP-6305

CEILING LEVEL

CEILING LEVEL

CEILING LEVEL PIVOT HINGE SEE IN DOOR HARDWARE SCHEDULE

PIVOT HINGE SEE DOOR HARDWARE SCHEDULE

2

2

ID-TYP-6304

ID-TYP-6305

2650(C.O.S.)

1900

43mm.THK. SOLID PANEL LOUVER DOOR W/ SPAY PAINT FINISH

2000

100

2650(C.O.S.)

100

DOOR PULL HANDLE SEE IN DOOR HARDWARE SCHEDULE

DOOR HANDLE SEE DOOR HARDWARE SCHEDULE

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

10mm.THK.CLEAR TEMPERED GLASS

10mm.THK.CLEAR TEMPERED GLASS

:Consultant 1 Discipline

DOOR LOCK SET SEE INDOOR HARDWARE SCHEDULE

FLOOR SPRING SEE DOOR HARDWARE SCHEDULE

FFL. 4EQ.=2430

35

Other Party 2 Responsibility

FLOOR SPRING SEE IN DOOR HARDWARE SCHEDULE

100

FFL.

1100

1100

:::::-

FFL.

Other Party 1 Responsibility

::-

35 1000

2500(C.O.S)

1000

::Client

2000

::DR-06

ELEVATION

ELEVATION

DR-07

DR-08

ELEVATION

::Project

THE LORD RAMA 9

DOOR TYPE

SINGLE PIRVIT TEMPERED GLASS FRAMLESS DOOR

DOOR LOCATION

AHU

DOOR LOCATION

OFFICE AREA

DOOR LOCATION

OFFICE AREA

DOOR FRAME

-

-

-

DOOR PANEL

10 MM. THK. CLEAR TEMPERED GLASS

MATERIAL

DOOR FRAME

43 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

MATERIAL

DOOR FRAME

DOOR PANEL

DOOR PANEL

10 MM. THK. CLEAR TEMPERED GLASS

DOOR FRAME

-

DOOR PANEL

REFER A4 SPEC

DOOR FRAME

-

DOOR PANEL

REFER A4 SPEC

FINISH

DOUBLE PIRVIT TEMPERED GLASS FRAMLESS DOOR

FINISH

DOOR TYPE

FINISH

FOLDING LOUVER DOOR WITH ALUMINUM FRAME

MATERIAL

Drawing title

DOOR TYPE

DOOR FRAME

-

DOOR PANEL

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

DOOR HARDWARE TYPE

REFER A4 SPEC

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

1 : 25

07

DR-07 1 : 25

08

DR-08 1 : 25

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size

REFER A4 SPEC

DR-06

Date generated

27/03/20

DOOR HARDWARE TYPE

06

TYPICAL DOOR DETAIL DR-06,DR-07,DR-08 -

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6203

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

EDGING DETAIL 1.5 MM. STEEL PLATE EPOXY FINISHING: COLOR TO MATCH DOOR FRAME

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

18

900

500

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

18

:

1436

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

50

5235 5335

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

50

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

OUTSIDE ROOM

ภูมิสถาปนิก

:

Key Plan

18

CEILING LEVEL

FINISHED LEVEL

2382

LM:02

50

50

CH.+2000

50x100MM.FRAME CPVC.WHITE COLOR FINISH

WINDOW (W-1)

LM:02

2000 1825 1725

45 MM. THK. SOLID CORE MDF.DOOR W/ 45 MM. ALUMINUM EDGE WOOD DOOR

FIXED GLASS

FIXED GLASS

FIXED GLASS

FIXED GLASS

2000 1825 1725

W-1

FIXED GLASS

50

300

FFL.

175

FFL.

50

DROP SEAL 900

500

1047

18

1047

5EQ=5235 5335 1047

50

1047

1047

LANDING

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

Consultant 2 Discipline

:50x100MM.FRAME CPVC.WHITE COLOR FINISH

10MM.THK. CLEAR TEMPERED GLASS

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

:-

Consultant 1 Discipline

:Other Party 2 Responsibility

50

1000

DOOR HARDWARE AS SCHEDULED

3 MM GROOVE LINE

18

10MM.THK. CLEAR TEMPERED GLASS

50x100MM.FRAME UPVC. WHITE COLOR FINISH

175

2700

ALUMINUM FRAME 18x100 MM. ALUMINIUM ANODIZED

FFL. LANDING

::::Other Party 1 Responsibility

::-

1436

::Client

::::Project

THE LORD RAMA 9

FIXED GLASS WINDOW

DOOR LOCATION

BLACKBOX STORAGE

WINDOW LOCATION

ENTRANCE STAIR

DOOR FRAME

ALUMINIUM FRAME SEE ALLOY SYSTEM DETAILS

ALUMINIUN FRAME SEE ALLOY SYSTEM DETAILS

45 MM. THK. SOLID CORE MOISTURE RESISTANT PLYWOOD

MATERIAL

WINDOW FRAME

DOOR PANEL

WINDOW PANEL

10 MM. THK. CLEAR TEMPERED GLASS

DOOR FRAME DOOR PANEL

ALUMINIUM FRAME BY ALLOY LAMINATE

FINISH

WINDOW TYPE

FINISH

DOUBLE SWING ACOUSTIC DOOR

MATERIAL

Drawing title

DOOR TYPE

Date generated

WINDOW FRAME

WINDOW HARDWARE TYPE

REMARK

CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO WORK

REMARK

1 : 25

27/03/20

10

1 : 25

Checked

Approved

-

-

MF.

1:25 CONTRACTOR TO PROVIDE MOCKUP SAMPLE & HARDWARE FOR CLIENT & ARCHITECT REVIEW & APPROVAL PRIOR TO PROCEED WORK

W:01

Drawn

Scale @ A2 sheet size

REFER A4 SPEC

DR:01F

NATURAL ANODISED/ CPVC.WHITE COLOR FINISH

WINDOW PANEL

DOOR HARDWARE TYPE

09

TYPICAL DOOR & WINDOW DETAIL DR-01F,W-1 -

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6204

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

VARIES

NOTES

GLASS DOOR HINGE SEE DOOR HARDWARE SCHEDULE

DOOR HANDLE SEE IN DOOR HARDWARE SCHEDULE

INSIDE

C.O.S.

10mm.THK. CLEAR TEMPERED GLASS DOOR

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

10mm.THK. CLEAR TEMPERED GLASS DOOR

ARCHITECTS : สถาปนิก

OUTSIDE

RUBBER SEAL 100

900

GLASS DOOR HINGE SEE DOOR HARDWARE SCHEDULE

:

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

2

HORIZONTAL SECTION

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

DOOR HANDLE SEE IN DOOR HARDWARE SCHEDULE

OUTSIDE

2000

INSIDE

ภูมิสถาปนิก

:

Key Plan

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::GLASS DOOR HINGE SEE DOOR HARDWARE SCHEDULE

::Project

THE LORD RAMA 9

Drawing title

TYPICAL DOOR SECTION DR-01 -

FFL.

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size

1

VERTICAL SECTION

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6301

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

VARIES

18

NOTES

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

DOOR CLOSER SEE IN DOOR HARDWARE SCHEDULE

100

5

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก

18

900

:

18

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

936

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

2

วิศวกรสุขาภิบาล

SANITARY ENGINEERS :

HORIZONTAL SECTION

:

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

DOOR HANDLE & LOCK SET SEE DOOR HARDWARE SCHEDULE

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

2200

100

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

DOOR HANDLE & LOCK SET SEE DOOR HARDWARE SCHEDULE

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:55 18

Consultant 3 Discipline

900 936

18

:Consultant 2 Discipline

:Consultant 1 Discipline

:-

3

HORIZONTAL SECTION

Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL DOOR SECTION DR-02A, DR-02B, DR-05 -

FFL.

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size

1

VERTICAL SECTION

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6302

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

1200

100

43mm. THK. HOLLOW CORE DOOR W/ LAMINATE FINISH W/ PVC. EDGING TO MATCH LAMINATE

18mm. THK. ALUMINIUM DOOR FRAME POWDER COATED FINISH BY ALLOY

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ :

ARCHITECTS : สถาปนิก :

100

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

18

1100

18

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

1136

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

2

HORIZONTAL SECTION

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

::::Other Party 1 Responsibility

::::Client

::::Project

THE LORD RAMA 9

Drawing title

TYPICAL DOOR SECTION DR-04 -

FFL.

Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size

1

VERTICAL SECTION

Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6303

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

PIVOT HINGE SEE DOOR HARDWARE SCHEDULE

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

PIVOT HINGE SEE DOOR HARDWARE SCHEDULE

10mm.THK.CLEAR TEMPERED GLASS 100

:

ARCHITECTS : สถาปนิก :

1000

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

2000

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

10mm.THK.CLEAR TEMPERED GLASS

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

2

HORIZONTAL SECTION

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

2650(C.O.S)

DOOR HANDLE SEE DOOR HARDWARE SCHEDULE

CL

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

1100

::::Other Party 1 Responsibility

::::Client

FLOOR SPRING SEE DOOR HARDWARE SCHEDULE

::::Project

THE LORD RAMA 9

1

VERTICAL SECTION Drawing title

TYPICAL DOOR SECTION DR-07 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6304

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES

PIVOT HINGE SEE DOOR HARDWARE SCHEDULE

DOOR HANDLE SEE DOOR HARDWARE SCHEDULE

PIVOT HINGE SEE DOOR HARDWARE SCHEDULE

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

OWNERS : เจ้าของ

10mm.THK.CLEAR TEMPERED GLASS 100

:

ARCHITECTS : สถาปนิก :

1000

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า :

10mm.THK.CLEAR TEMPERED GLASS

2

HORIZONTAL SECTION

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

2650(C.O.S)

DOOR HANDLE SEE DOOR HARDWARE SCHEDULE

CL

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:Consultant 3 Discipline

:Consultant 2 Discipline

:Consultant 1 Discipline

:Other Party 2 Responsibility

1100

::::Other Party 1 Responsibility

::::Client

FLOOR SPRING SEE DOOR HARDWARE SCHEDULE

::::Project

THE LORD RAMA 9

1

VERTICAL SECTION Drawing title

TYPICAL DOOR SECTION DR-08 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:5 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-6305

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES 1

2

3

4

5

6

7

8

8500

8500

8500

8500

8500

8500

8500

85000

8500

MALE

1

1000

A FEMALE

B

C2 C1

C2

C1

ID-TYP-4211

112 sq.m.

86 sq.m.

RETAIL AREA 16

RETAIL AREA 17

2500

MEP Shaft

MEP

DN

295 sq.m. RETAIL AREA 15

Shaft

JO-02 8500

NOT IN ID SCOPE

ID-TYP-7002

UP

MEP Shaft

DN

FHC.

2500

BIN

RECYCLE

LIFT CORRIDOR

ID-TYP-5402

ID-TYP-5401

C OPEN TO BELOW

C1

C1

ID-TYP-4002

C3

UP

C2

C1

ID-TYP-5403

CONTROL POINT ACCESS

C1

C2

C3

27

LIFT

169 sq.m.

UP

UP

ID-TYP-4001 LIFT HALL

8500

27500

OPEN

RETAIL AREA 18

DN

DN

CORRIDOR AREA 345.76 sq.m.

D RAMP

C1

C1

C2

C3

ACCESS CONTROL POINT

DISABLED ACCESS / MANUAL OPERATED

CORRIDOR

8500

UP

FHC.

C1

NOT IN ID SCOPE DN

JO - 01

RECEPTION

MEP

2500

Shaft

1000

2500

OPEN TO BELOW

63

64

1000

E

CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

F

OWNERS : เจ้าของ

NOT IN ID SCOPE RMU.1 / MEA ROOM

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง :

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A

PL-01

PL-01

SK-01

FURNITURE LAYOUT PLAN 2 FL. SCALE

-

1:500

:

MECHANICAL ENGINEERS :

วิศวกรงานระบบ

:

SK-01

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

INTERIOR DESIGNER :

มัณฑนากร

:

LANDSCAPE DESIGNER :

DR-05

ภูมิสถาปนิก

:

1500

Key Plan

2250

H.+750

H.+1100

2462 2 EQ = 1262

3190 450

50

2 EQ = 1340

450

450

450

450 E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

330

LM:01 TOP COUNTER : W/ LAMINATE FINISH H.+750

H.+750

ST-01 TOP COUNTER : W/ STONE FINISH

420

02

Consultant 3 Discipline

:-

JOINERY DETAIL (JO:01) / PLAN SCALE

Consultant 2 Discipline

1:25

1546

4106

:-

5652

Consultant 1 Discipline 01

:Other Party 2 Responsibility

::-

DR-05

::-

CT-02 CERAMIC TILE FINISH (CT:02) WHITE MARBLE

Other Party 1 Responsibility

FIXED

::::-

2200

Client

::-

LED VIDEO WALL ADVERTISING SIGNAGE SCOOP ( SEE DETAIL IN GRAPHIC PACKAGE )

::Project

THE LORD RAMA 9

3300

CONCEALED MORTISE HINGE STARTEC HAFALE. NO.927.91.614(HAFALE. BASIC)

500 FFL.+0.000

FFL.+0.000

-

ELEVATION SCALE

1:25

3206 5652

850

310 40 350

390

50

-

SECTION JOINERY DETAIL SCALE

1:25

LM:01 TOP COUNTER : W/ LAMINATE FINISH Drawing title

ST-01 FRONT COUNTER : W/ STONE FINISH RECESSED LED STRIP LIGHT AS SCHEDULED LM:01 FRONT COUNTER : W/ LAMINATE FINISH

50 50

02

50

350

LM:01 FRONT COUNTER : W/ LAMINATE FINISH LM:03

1546

01

1100

500

ST-01 FRONT COUNTER : W/ STONE FINISH

CONCEALED LED LIGHT TUBE

420 320

40

H.+1100

40

H.+1100

50

ST-01 TOP COUNTER : W/ STONE FINISH

100 260

ST-01 TOP COUNTER : W/ STONE FINISH

100

-

:-

H.+1100

1100

A

H.+1100

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

500 600

LM:03 RECESSED 100 MM. SKIRTING : LAMINATE FINISH

JOINERY DETAIL JO:01 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-7001

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Copyright © THE BEAUMONT PARTNERSHIP 2009

NOTES CONTRACTOR MUST VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK OR PREPARING WORKSHOP - DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. - CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER TO REFER TO ENGINEERS AND/OR M&E CONSULTANTS INFORMATION AND DWGS BEFORE PROCEEDING WITH WORKS. ALL CONSULTANTS INFORMATION TO BE REFERRED TO. TO ENSURE COMPLIANCE WITH LOCAL AND STATUTORY BUILDING REGULATIONS. ALL DIMENSION TO BE CHECKED BY CONTRACTOR/SUPPLIER ON SITE. - SAMPLES TO BE PROVIDED BY MAIN CONTRACTOR FOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. - ALL METAL PARTS MUST BE TREATED TO PREVENT RUST OR CORROSION. - ALL METAL JOINTS MUST BE POLISHED TO PREVENT SHARP EDGES. - ALL WOOD MUST BE KILN DRIED AND FREE FROM INSECTS AND VERMIN. - ALL EXPOSED AREA TO BE PROTECTED WITH 2NO. COATS OF POLYURETHRANE, SATIN FINISH. - ALL DIMENSIONS TO BE CHECKED ON SITE INCLUDING ACCESS. - CONTRACTOR TO SUPPLY SHOP DRAWINGS FOR TBP APPROVAL PRIOR TO CONSTRUCTION - ALL SAMPLES MUST BE APPROVED BY TBP PRIOR TO FABRICATION

8500

8500

8500

8500

C1

C1

8500

8500

8500

85000

8500

ID-TYP-5401

C2

C2

C2

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

-

JO - 02

ID-TYP-4206

LIFT C1

C3

ID-TYP-4002

ID-TYP-5401

ID-TYP-5401

UP

C1

C3

DN

ID-TYP-5401

ID-TYP-5401

C2

C2

C2

C1

C1

C2

C2

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

ID-TYP-5401

OWNERS : เจ้าของ

900

02

:

ARCHITECTS : สถาปนิก :

STRUCTURE ENGINEERS :วิศวกรโครงสร้าง

W/ LAMINATE FINISH (LM:TM1)

:

ELECTRICAL ENGINEERS : วิศวกรไฟฟ้า

A -

FURNITURE LAYOUT PLAN 7 FL. SCALE

:

MECHANICAL ENGINEERS :

1:500

วิศวกรงานระบบ

:

100

700

100

วิศวกรสุขาภิบาล

SANITARY ENGINEERS : :

900

INTERIOR DESIGNER :

มัณฑนากร

:

DOOR PANEL: 20 MM. THK. MDF. BOARD W/ LAMINATE FINISH (LM:TM1)

01

A -

EXISTING SLAB LEVEL

EXISTING SLAB LEVEL

CELLING LEVEL

CELLING LEVEL

LANDSCAPE DESIGNER :

ภูมิสถาปนิก

:

Key Plan

JOINERY DETAIL (JO:02) / PLAN SCALE

1:25

E FOR CONSTRUCTION D ONLY TOILET FOR CON C REVISION RETAIL ENTRY B ADDENDUM A REVISED FOR TENDER FOR TENDER 100% Description Rev No. Consultant 4 Discipline

W/ LAMINATE FINISH (LM:TM1)

27/03/20 17/03/20 18/02/20 18/02/20 31/10/19 30/09/19 Date

:-

W/ LAMINATE FINISH (LM:TM1)

:-

GRAPHIC SIGNAGE SCOOP ( SEE DETAIL IN

Consultant 2 Discipline

:-

VARIE

VARIE

Consultant 3 Discipline

GRAPHIC PACKAGE )

Consultant 1 Discipline

:Other Party 2 Responsibility

::-

VOID

HINGES AND FLAP FITTING HAFELE MODEL D : 372.91.730

Other Party 1 Responsibility

::-

DOOR PANEL: 20 MM. THK. MDF. BOARD W/ LAMINATE FINISH (LM:TM1)

800

1800 + VARIE

800

DOOR PANEL: 20 MM. THK. MDF. BOARD W/ LAMINATE FINISH (LM:TM1)

1800 + VARIE

::-

::Client

::20

20

::Project

880

900

900

THE LORD RAMA 9 BIN

01 -

ELEVATION SCALE

1:25

100

100 MM. CABINET SKIRTING CEMENT BOARD SKIRTING WITH LAMINATE FINISH (LM:TM1)

100

DRAWER

800 900

900

02 -

100 MM. CABINET SKIRTING CEMENT BOARD SKIRTING WITH LAMINATE FINISH (LM:TM1)

100

SECTION JOINERY DETAIL SCALE

1:25

Drawing title

HINGES AND FLAP FITTING HAFELE MODEL D : 372.91.730

JOINERY DETAIL JO:02 Date generated

27/03/20

Drawn

Checked

Approved

-

-

MF.

Scale

1:25 @ A2 sheet size Project number

7948

35 mm. on original Drawing number

Revision

ID-TYP-7002

A

Status

FOR CONSTUCTION

MF. MF. MF. MF. MF. MF. App'd


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.