How To Sew In Your Hair Without Braid (Braid-Less Sew-In) https://www.sishair.com/ Many people think the only way to prepare the head for sewn-in hair extensions is braiding. However, we can quickly and easily make a strong base for hair tracks by using needle & thread as long as we try the "braidless weaving" or "the Malaysian method weave". 1. Pass a long length of thick thread of similar color to the client's hair through the needle, make a double knot in the end, and cut off the excess thread. 2. Use the point of the rat-tail comb to create a horizontal earto-ear parting, and clip the hair out of the way above the parting. 3. Hold the loose hair, gently pull downward to tighten the hair slightly at the roots, and create an even base for the track. 4. Place the bent needle away from the left side of the hair (about a quarter of an inch) as close as possible to the root. 5. Pull the thread under the section of hair, but do not let the knot pass underneath. 6. Pass the needle back under the same section of hair, and pull it up inside the new loop of thread tightly to create a knot around the hair. 7. Repeat this process. Work from left to right to create a row of tight knotted hair. Tie off the last knot tightly. Cut the excess thread. 8. Sew in the first track and work along the parting from left to right. Secure track along the sewn-in base. 9. Create another parting an inch above the first and parallel to it. Repeat the whole procedure. 10.Through the hair until the desired result is achieved, as the same way. Tips  
Make sure the sewing base is as tight and secure as possible and will not hurt the customer. It is recommended to create a stitched base from the hairline along each parting half an inch in.