PIX szíj termékek by S.I.S. Kft.

Power Transmission Solutions

D/tswUfr cÿh/frOhth!

Product Catalogue

a A* '

L*>

Eg Eg

NY*

I’JT

x %

'41

m UJ

www.pixgermany.de

Contents

Particulars Belt Maintenance Tips PIX-X’set® (Wrap Industrial V-Belts) Classical Section Belts 8/8x5 Z/10x6 A/13x8 B/17x11 C/22x14 D/32x19 20/20x13 25/25x16 E/38x23 Wedge Section Belts SPZ/10x8 SPA/13x10 SPB/17x14 SPC/22x18 High Capacity Narrow V-Belts 3V/9.7x8 5V/16x14 8V/25x23 PIX-MUSCLE®-XS3 (High-Power Maintenance-Free Wrap Belts) Wedge Section Belts MUSCLE SPZ/10x8 MUSCLE SPA/13x10 MUSCLE SPB/17x14 MUSCLE SPC/22x18 Narrow Section Belts MUSCLE 3V/9.7x8 MUSCLE 5V/16x14 MUSCLE 8V/25x23 PIX-Duo®-XS (Hexagonal V-Belts) AA/13x10 BB/17x14 CC/22x17 PIX-DuraBand®-XS (Wrap Banded Belts) HA/13X10 HB/17x13 HC/22x16 HD/32x21.5 HSPZ/10x10 HSPA/13x12 HSPB/17x16 HSPC/22x20 H3V/9.7x10 H5V/15.8x16 H8V/25.4x25 Standard designation Minimum order quantity PIX-GALLANT®-HXS (Heavy-Duty High Power Banded Belts) GALLANT HSPB/17x16 GALLANT HSPC/22x20 GALLANT H5V/15.8x16 GALLANT H8V/25.4x25 PIX-X’set® VS (Wrap Vari-Speed V-Belts) 17x8, 25x13, 32x15, 38x18, 45x20, 51x20, 55x22, 60x25, 68x24

Page No. 1

3 3 4 5-6 7 8 8 9 9 10 11 12 13 14 14 15

17 18 19 19 20 20 21 23 23 23 25 25 26 26 27 27 28 28 29 29 30 30 31 33 33 34 34 36

Contents

Particulars

Page No.

PIX-X’tra (Raw Edge Cogged Belts) Classical Section Belts ZX/10x6 AX/13x8 BX/17x11 CX/22x14 Wedge Section Belts XPZ/10x8 XPA/13x10 XPB/17x14 XPC/22x18 High Capacity Narrow V-Belts 3VX/9.7x8 5VX/16x14 PIX-DuraBand®-XR (Raw Edge Cogged Banded Belts) HAX/13X10 HBX/17x13 HXPZ/10x10 HXPA/13x12 HXPB/17x16 HXPC/22x20 H3VX/9.7x10 H5VX/15.8x16 Standard designation Minimum order quantity PIX-MUSCLE®-XR3 (High Power Maintenance-Free Cogged Belts) Wedge Section Belts MUSCLE XPZ/10x8 MUSCLE XPA/13x10 MUSCLE XPB/17x14 MUSCLE XPC/22x18 Narrow Section Belts MUSCLE 3VX/9.7x8 MUSCLE 5VX/16x14 PIX-X’tra®-XV (Raw Edge Cogged Variable Speed Belts) 22V-A22/1422V, 30V-A22/1922V, 37V-A22/2322V, 30V-A26/1926V, 46V-A26/2926V, 51V-A26/3226V, 40V-A30/2530V, 51V-A30/3230V, 70V-A30/4430V, 64V-A36/4036V, 70V-A36/4436V, 76V-A36/4836V, 13x5, 17x5, 20x10, 21x6, 22x8, 26x8, 28x8, 30x10, 32x10, 35x12, 37x10, 41x13, 47x13 PIX-Duo®-XV (Double Cog Variable Speed Belts) Standard desigation PIX-X’ceed® (Ribbed/Poly Industrial V-Belts) H/PH J/PJ L/PL M/PM Standard designation PIX-X’act® (Timing / Synchronous Belts) PIX-X’act® CT (Classical Section Belts) MXL XXL XL L

38 39 40 41 42 43 44 44 45 45 47 47 48 48 49 49 50 50 51 51

53 54 55 55 56 56 58-59

59 60 62 63 64 64 64

66 66 67-69 70-71

Contents

Particulars

Page No.

PIX-X’act® CT (Classical Section Belts) H 72-74 XH 75 XXH 76 PIX-X’act® HTD (HTD Timing Belts) 3M 77-79 PIX-X’act® STD (STD Timing Belts) S3M 80-81 PIX-TorquePlus®-XT2 (High Power Timing Belts) TP 5M 83-84 TP 8M 85-86 TP 14M 87 TP S5M 88 TP S8M 89-90 Standard designation 90 PIX-X’pedient®-XT (Polyurethane Belts) T5 92-93 AT5 94-95 T10 96-97 AT10 98-99 PIX-LawnMaster®-XS (Dry Cover Belts) Dry 3L-K/10x6 101 Dry 4L-K/13x8 102 Dry 5L-K/17x10 103 PIX Special Lawn & Garden Belts: A104-108 PIX-Duo®-XT (Double-sided Timing Belts) 109 PIX-FORCE® (Raw Edge Cogged Automotive Belts) AVX10 111 AVX11 112 AVX13 113 AVX17 114 PIX-FORCE® (Banded Raw Edge Cogged Automotive Belts) HAVX10 115 HAVX13 115 PIX-FORCE® (Ribbed/Poly EPDM Automotive V-Belts) 3PK 116 4PK 117 5PK 118 6PK 119 7PK 120 8PK 121 9PK 122 10PK 122 11PK, 12PK, 14PK, 15PK sections 123 PIX-Duo-XC® (Double-Sided Ribbed Belts) 5DPK, 6DPK, 7DPK, 12DPK sections 123 PIX-Application Specific Special Construction Belts PIX-ECHELON®-XS (For food-grain and ceramic tiles industry) 125 PIX-TEXTURA®-XS (For ceramic tiles & general industry) 125 PIX-CERAMICA®-XS (For ceramic tiles industry) 125 PIX-EXTRACTOR®-XS (For carrot harvesters & horticultural appl.) 125 PIX-X’press®-XS (Tiles industry) 125 PIX-Brawn®-XT (Timing+Poly Belts) 126 PIX-FRAS®(Fire Resistant Antistatic Belts) 127 PIX-Combine Harvester Belts 128-143

Contents

Particulars

Page No. ®

PIX-WhiteKnight (Snowmobile Belts) PIX-TopCoat® (Packaging Machinery Belts) PIX-Sentinel FFP®-XT (Fin-fan Belts) PIX-PaintPro®-XT (Automotive Paint-shop Belts) PIX-PowerWare® (Taper Lock Pulleys & Bushes) PowerWare “SPZ” Section Pulleys PowerWare “SPA” Section Pulleys PowerWare “SPB” Section Pulleys PowerWare “SPC” Section Pulleys PowerWare Taper Bushes with screw PIX-Accessory Products

144-145 146-147 148 149 151 152 153 154 154 155-157

BELT MAINTENANCE TIPS FREE SET CONCEPT Few good reasons for using it: • No length code • Close length tolerances • Low stretch • Low variation in elongation within a set of Belts • Power transmitted more evenly • Longer life • Reduced maintenance periodicity • Less inventory

POLY/RIBBED V-BELTS Installation procedure: 1. Switch off the main supply before beginning with the exercise of installation. 2. Bring the pulleys closer to each other so that the belt can be removed easily. 3. Inspect the pulley grooves for any scores, sharp edges, dirt and rust. 4. Ensure the alignment of pulleys. Make sure that the shafts are also properly aligned. 5. Mount the ribbed belt with no tension. Make sure that the ribs have been properly seated in the grooves. 6. Tension the ribbed Belts as per the procedure recommended. 7. Give some running time to the drive so that the Belts are properly seated in the grooves. 8. Guard the drive properly.

WRAP & CUT EDGE CONSTRUCTION V-BELTS Installation and maintenance: • The drive should always be inspected periodically. • Prior to installation, inspect sheave for dirt, rust, cracks burrs etc. • The Belts should never be forced on the pulleys. • Maintain proper belt tension to avoid slippage. Always use ‘PIX Tension Tester’ for tensioning/re-tensioning. • Change your Belts - If cracks are observed at the side wall or at the bottom. - If the cord is protruding out from the belt.

Cord tied to shaft Alignment checking using a straight edge

RIGHT

Tensioning procedure: 1. Fit the belt on the pulleys with no tension 2. Draw two perpendicular lines across the belt at about 80% of the belt span between the pulleys as shown in the figure. Say for example the lines are placed 1000 mm apart (A).

WRONG

<5 A

T t t t Cord touching pulleys at point indicated by arrows

3. Increase the distance between two lines by 0.5 to 0.75% i.e. by 5 mm to 7.5 mm for an initial spacing of 1000 mm, so that the (A) now becomes 1007.5 mm.

Ensure perfect alignment of pulleys

RIGHT

WRONG

Belt fitment

111

WRONG

Do not pry or roll V-Belts into the pulley grooves

4. Run the drive under load for about 10 minutes. 5. Check the tension of the belt (spacing between two lines) and readjust, if necessary.

V-Belt Tension measurement procedure: 1. Measure the span length of the belt in mm. (Ref.sketch) 2. Tie a string/thread on the two pulleys Span J along the length of Belts and mark Deflection Force centre of the span on the belt. 3. Calculate 1.5% of the span (say ‘x’) for belt span length less than 1000 mm and 1% of the span if belt span Belt deflection measurement length is more than 1000 mm. Adjust lower ring on the tension tester on mm scale to coincide, ‘x’ mm with the lower side of the ring. Adjust lower side of the upper ring at ‘0’ Newton. 4. Place Tension Tester at the centre of the span of the belt. Apply force with the help of Tension Tester perpendicular to the span till the lower surface of the ring touches the string. 5. Read the deflection force value (N) on the Newton Scale by taking reading at the lower side of the upper ring. 6. Compare the deflection force value as mentioned in the “User’s Guide” table. (Refer User’s Guide V-Belts). The deflection force value (N) should lie between the minimum and maximum values. 7. Deflection force less than minimum recommended value in the range indicates an under-tensioned drive and deflection force higher than maximum recommended value indicates an over-tensioned drive.

Installation and take up allowance L

(mm)

<750 750-1200 1200-2000 2000-3500 3500-6000 >6000

-10 -10 -15 -20

+10 +15 +20 +30

-11 -12 -16 -23

‘T’ for take up

PL T

PM T

Calculated ‘C’

‘M’ for fitting

+13 +16 -15 +20 +22 -20 +20 +32 -30 +35 -40 +50 -40 +50 -50 +70 -100 +130

M T

SYNCHRONOUS / TIMING BELTS Installation & tensioning procedure: Synchronous Belt drives do not require high initial Belt tension as like other V-Belt drives. Synchronous Belt drives are positive drives and need the tension just sufficient to transmit the required power. It should neither be too tight nor too loose. The maximum and minimum limits are given below. Maximum Deflection Force P x 1145000 (Newtons) F (max) = dxn Minimum Deflection Force F (min) = P x 477500 (Newtons) dxn

Where : P = Power to be transmitted (Kw) d = Driver pitch diameter (mm) n = Driver rpm c = span length (mm) Span length

C δ Belt Deflection = (mm) 50

g~~pQ:

Driver

Driven

F (Deflection force)

PIX- X’set

Wrap Construction Belts

ism

■E

Mi.

Features & Benefits: • Oil resistant & antistatic • Temperature range: -18°C to +80°C • ATEX certified FRAS Belts are also available PIX-X’set Belts are available in Classical, Wedge and Narrow sectionsClassical: • Top-width to height ratio is 1.6:1 • Maximum permissible Belt speed is 30m/sec • Permissible flex rate f=80 per sec Wedge: • Top-width to height ratio is 1.2:1 • Maximum permissible Belt speed is 42m/sec • Permissible flex rate f=100 per sec. Narrow: • Maximum permissible Belt speed is 45m/sec • Permissible flex rate f=80 per sec Application: Industrial drives such as pumps, generators, ball-mills, crushers, compressors etc.

X’set® Wrap Construction Belts

Classical Section: 8 Standard: DIN 2215-1975 Features: • Top width to height ratio 1.6:1 • Temperature range: -180C to +800C • Maximum recommended belt speed is 30 m/sec • Permissible flex rate f=80 per second • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available

8 mm 5mm

-Xld

Belt length factor (mm) Lp to La Li to Lp Li to La 12 19 31

Mfg. range 39” to 174”

8 / 8x5 Weight / metre (Kgs) 0.041

Rec. min Angle Dimensions (mm) MOQ Section Top width Thickness (Degree) pulley dia. (No. of Belts) 40 dp (mm) 8 8 5 40 80 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: II 2GD c IIB X (Test report no. IB-03-4-934)

8x5 8x5 8x5

1019 1039 1069

1000 1020 1050

8x5 8x5 8x5

Belt Reference

Datum/Pitch Length (mm)

Inside Length (mm)

Belt Reference

-Xld

1094 1139 1219

1075 1120 1200

Datum/Pitch Length (mm)

Inside Length (mm)

1269

1250

8x5

Datum/Pitch Length (mm)

Inside Length (mm)

Belt Reference

® X’set Wrap Construction Belts

Classical Section: Z Standard: BS 3790, ISO 4184, IS 2494 Features: • Top width to height ratio 1.6:1 • Temperature range: -180C to +800C • Maximum recommended belt speed is 30 m/sec • Permissible flex rate f=80 per second • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available

Z / 10x6 Mfg. range 9.5” to 176”

Belt length factor (mm) Lp to La Li to Lp Li to La 38 16 22

10 mm

Ig-s-a

6 mm

Weight/metre (Kgs) 0.057

Dimensions (mm) Rec. min Angle MOQ Section Top width Thickness (Degree) pulley dia. (No. of Belts) 50 dp (mm) Z 10 6 40 64 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: II 2GD c IIB X (Test report no. IB-03-4-934)

Z 32 Z 32.5 Z 33 Z 33.5 Z 34 Z 34.5 Z 35 Z 35.5 Z 36 Z 36.5 Z 37 Z 37.5 Z 38 Z 38.5 Z 39 Z 39.5 Z 40 Z 40.5 Z 41 Z 41.5 Z 42 Z 42.5 Z 43 Z 43.5 Z 44 Z 44.5 Z 45 Z 45.5 Z 46 Z 46.5 Z 47 Z 47.5 Z 48 Z 48.5 Z 49 Z 50

378 403 416 428 443 454 467 479 494 505 517 530 543 555 568 581 594 606 619 632 644 657 670 682 695 708 721 733 746 759 771 784 797 803 809 822

360 381 395 410 420 435 450 457 470 480 500 510 520 535 545 560 575 585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 781 790 800

Z 14 Z 15 Z 15.5 Z 16 Z 16.5 Z 17 Z 17.5 Z 18 Z 18.5 Z 19 Z 19.5 Z 20 Z 20.5 Z 21 Z 21.5 Z 22 Z 22.5 Z 23 Z 23.5 Z 24 Z 24.5 Z 25 Z 25.5 Z 26 Z 26.5 Z 27 Z 27.5 Z 28 Z 28.5 Z 29 Z 29.5 Z 30 Z 30.5 Z 30.75 Z 31 Z 31.5

Belt Reference

Datum/Pitch Length (mm)

Inside Length (mm)

Belt Reference

835 848 860 873 886 898 911 924 936 949 962 975 987 1000 1013 1025 1038 1051 1063 1076 1089 1102 1114 1127 1140 1152 1165 1178 1190 1203 1216 1229 1241 1254 1270 1292

815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1270

Datum/Pitch Length (mm)

Inside Length (mm)

1285 1300 1308 1320 1350 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1854 1900 1980 2000 2100 2160 2240 2286 2360 2565 2616 2650

Z 50.5 Z 51 Z 51.5 Z 52 Z 53 Z 54 Z 55 Z 56 Z 57 Z 58 Z 59 Z 60 Z 61 Z 62 Z 63 Z 64 Z 65 Z 66 Z 67 Z 68 Z 69 Z 70 Z 71 Z 73 Z 75 Z 78 Z 79 Z 83 Z 85 Z 88 Z 90 Z 93 Z 101 Z 103 Z 104

Inside Length (mm)

Belt Reference

Datum/Pitch Length (mm)

1305 1317 1330 1343 1368 1394 1420 1444 1470 1495 1521 1546 1571 1597 1622 1648 1673 1698 1724 1749 1775 1800 1825 1876 1927 2003 2030 2130 2181 2257 2308 2384 2587 2640 2664

• Non standard stock items are available upon request

FIX¬ X’set Wrap Construction Belts ®

Classical Section: A Standard: BS 3790, ISO 4184, IS 2494

A / 13x8 Mfg. range Weight/metre (Kgs) Belt length factor (mm) 13” to 357” 0.106 Lp to La Li to Lp Li to La 14 50 36 Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 71 dp (mm) A 13 8 40 45 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: 'S II 2GD c IIB X (Test report no. IB-03-4-934)

13 mm 8 mm

Features: • Top width to height ratio 1.6:1 • Temperature range: -180C to +800C • Maximum recommended belt speed is 30 m/sec • Permissible flex rate f=80 per second • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

A 15 A 16 A 17 A 18 A 18.5 A 19 A 19.5 A 20 A 20.5 A 21 A 21.5 A 22 A 22.5 A 23 A 23.5 A 24 A 24.5 A 25 A 25.5 A 26 A 26.5 A 27 A 27.5 A 28 A 28.5 A 29 A 29.5 A 30 A 30.5 A 31 A 31.5 A 32 A 32.5 A 33 A 33.5 A 34 A 34.5 A 35 A 35.5 A 36 A 36.5 A 37 A 37.5 A 38 A 38.5 A 39 A 39.5 A 40 A 40.5 A 41 A 41.5 A 42 A 42.5 A 43 A 43.5 A 44 A 44.5 A 45 A 45.5

381 410 435 457 470 480 500 510 520 535 545 560 575 585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155

417 442 468 493 506 519 531 544 557 569 582 595 608 620 633 646 658 671 684 696 709 722 735 747 760 773 785 798 811 823 836 849 862 874 887 900 912 925 938 950 963 976 989 1001 1014 1027 1039 1052 1065 1077 1090 1103 1116 1128 1141 1154 1166 1179 1192

A 46 A 46.5 A 47 A 47.5 A 48 A 48.5 A 49 A 49.5 A 50 A 50.5 A 51 A 51.5 A 52 A 52.5 A 53 A 53.5 A 54 A 55 A 56 A 57 A 58 A 59 A 59.5 A 60 A 61 A 62 A 63 A 64 A 64.5 A 65 A 66 A 67 A 68 A 69 A 70 A 71 A 72 A 73 A 74 A 75 A 76 A 77 A 78 A 79 A 80 A 81 A 82 A 82.5 A 83 A 83.5 A 84 A 84.5 A 85 A 86 A 86.5 A 87 A 88 A 88.5 A 89

1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1511 1525 1550 1575 1600 1625 1638 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2096 2100 2120 2134 2150 2160 2184 2200 2210 2240 2250 2260

• Non standard stock items are available upon request

Datum/Pitch Length (mm)

1204 1217 1230 1243 1255 1268 1281 1293 1306 1319 1331 1344 1357 1370 1382 1395 1408 1433 1458 1484 1509 1535 1547 1560 1585 1611 1636 1662 1674 1687 1712 1738 1763 1789 1814 1839 1865 1890 1916 1941 1966 1992 2017 2043 2068 2093 2119 2132 2144 2157 2170 2182 2195 2220 2233 2246 2271 2284 2297

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

A 90 A 91 A 92 A 93 A 94 A 95 A 96 A 96.5 A 97 A 98 A 99 A 100 A 101 A 102 A 103 A 104 A 105 A 106 A 107 A 108 A 109 A 110 A 111 A 112 A 113 A 114 A 115 A 116 A 117 A 118 A 119 A 120 A 122 A 124 A 126 A 128 A 130 A 132 A 134 A 136 A 138 A 140 A 142 A 144 A 146 A 148 A 152 A 154 A 158 A 160 A 162 A 167 A 173 A 177 A 180 A 197 A 210

2286 2311 2337 2360 2388 2413 2438 2451 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3200 3250 3302 3350 3400 3450 3500 3550 3600 3658 3700 3750 3860 3910 4000 4064 4115 4250 4394 4500 4572 5000 5330

2322 2347 2373 2398 2424 2449 2474 2487 2500 2525 2551 2576 2601 2627 2652 2678 2703 2728 2754 2779 2805 2830 2855 2881 2906 2932 2957 2982 3008 3033 3059 3084 3135 3186 3236 3287 3338 3389 3440 3490 3541 3592 3643 3694 3744 3795 3897 3948 4049 4100 4151 4278 4430 4532 4608 5040 5370

PIX- X’set Wrap Construction Belts ®

Classical Section: B Standard: BS 3790, ISO 4184, IS 2494

B / 17x11 Belt length factor (mm) Lp to La Li to Lp Li to La 69 26 43

17 mm

11 mm

Mfg. range 16” to 900”

Weight/metre (Kgs) 0.184

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) B 17 11 40 112 dp (mm) 36 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

B 17 B 18 B 19 B 20 B 21 B 22 B 23 B 23.5 B 24 B 24.5 B 25 B 25.5 B 26 B 26.5 B 27 B 27.5 B 28 B 29 B 29.5 B 30 B 30.5 B 31 B 31.5 B 32 B 32.5 B 33 B 33.5 B 34 B 34.5 B 35 B 35.5 B 36 B 36.5 B 37 B 37.5 B 38 B 38.5 B 39 B 39.5 B 40 B 40.5 B 41 B 41.5 B 42 B 42.5 B 43 B 43.5 B 44 B 44.5 B 45 B 45.5 B 46 B 46.5 B 47 B 47.5 B 48 B 48.5

420 457 480 510 535 560 585 597 610 620 635 650 660 675 686 700 710 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230

475 500 526 551 576 602 627 640 653 665 678 691 703 716 729 742 754 780 792 805 818 830 843 856 869 881 894 907 919 932 945 957 970 983 996 1008 1021 1034 1046 1059 1072 1084 1097 1110 1123 1135 1148 1161 1173 1186 1199 1211 1224 1237 1250 1262 1275

B 49 B 49.5 B 50 B 50.5 B 51 B 51.5 B 52 B 52.5 B 53 B 53.5 B 54 B 55 B 56 B 57 B 58 B 59 B 60 B 61 B 62 B 63 B 64 B 65 B 66 B 67 B 68 B 69 B 70 B 71 B 72 B 73 B 73.5 B 74 B 75 B 76 B 77 B 78 B 79 B 80 B 81 B 82 B 83 B 83.5 B 84 B 84.5 B 85 B 86 B 86.5 B 87 B 88 B 89 B 90 B 91 B 92 B 93 B 94 B 94.5 B 95

1250 1260 1270 1280 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1867 1880 1900 1930 1956 1980 2000 2032 2060 2083 2100 2120 2134 2150 2160 2184 2200 2210 2240 2260 2286 2311 2337 2360 2388 2400 2413

1288 1300 1313 1326 1338 1351 1364 1377 1389 1402 1415 1440 1465 1491 1516 1542 1567 1592 1618 1643 1669 1694 1719 1745 1770 1796 1821 1846 1872 1897 1910 1923 1948 1973 1999 2024 2050 2075 2100 2126 2151 2164 2177 2189 2202 2227 2240 2253 2278 2304 2329 2354 2380 2405 2431 2443 2456

B 96 B 96.5 B 97 B 98 B 99 B 100 B 101 B 102 B 103 B 104 B 105 B 106 B 107 B 108 B 109 B 110 B 111 B 112 B 113 B 114 B 115 B 116 B 117 B 118 B 119 B 120 B 121 B 122 B 123 B 124 B 125 B 126 B 127 B 128 B 129 B 130 B 131 B 132 B 133 B 134 B 135 B 136 B 138 B 140 B 142 B 143 B 144 B 145 B 146 B 147 B 148 B 150 B 151 B 152 B 154 B 155 B 156

2438 2451 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3073 3100 3124 3150 3175 3200 3226 3250 3277 3302 3327 3350 3378 3400 3429 3450 3500 3550 3600 3630 3658 3683 3700 3734 3750 3810 3835 3860 3910 3937 3960

2481 2494 2507 2532 2558 2583 2608 2634 2659 2685 2710 2735 2761 2786 2812 2837 2862 2888 2913 2939 2964 2989 3015 3040 3066 3091 3116 3142 3167 3193 3218 3243 3269 3294 3320 3345 3370 3396 3421 3447 3472 3497 3548 3599 3650 3675 3701 3726 3751 3777 3802 3853 3878 3904 3955 3980 4005

• Non standard stock items are available upon request

PIX- X’set Wrap Construction Belts ®

Classical Section: B Standard: BS 3790, ISO 4184, IS 2494

B / 17x11 Belt length factor (mm) Lp to La Li to Lp Li to La 69 26 43

17 mm

11 mm

Mfg. range 16” to 900”

Weight/metre (Kgs) 0.184

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

B 158 B 160 B 162 B 163 B 164 B 165 B 167 B 168 B 170 B 172 B 173 B 175 B 177 B 178 B 180 B 182

4000 4064 4115 4140 4166 4200 4250 4267 4318 4370 4394 4450 4500 4520 4572 4623

4056 4107 4158 4183 4209 4234 4285 4310 4361 4412 4437 4488 4539 4564 4615 4666

B 184 B 185 B 186 B 189 B 190 B 191 B 192 B 195 B 196 B 197 B 200 B 204 B 208 B 210 B 216 B 220

4674 4699 4724 4800 4825 4850 4877 4950 4980 5000 5080 5182 5300 5330 5486 5600

4717 4742 4767 4844 4869 4894 4920 4996 5021 5047 5123 5225 5326 5377 5529 5631

• Non standard stock items are available upon request

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

B 224 B 225 B 226 B 228 B 235 B 236 B 238 B 240 B 248 B 280 B 300 B 315 B 343 B 510

5690 5715 5740 5800 5969 6000 6045 6100 6300 7100 7620 8000 8712 12954

5733 5758 5783 5834 6012 6037 6088 6139 6342 7155 7663 8044 8755 12997

PIX- X’set Wrap Construction Belts ®

Classical Section: C Standard: BS 3790, ISO 4184, IS 2494

C / 22x14 K

22 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 32 88 56

■H

14 mm

Features: • Top width to height ratio 1.6:1 • Temperature range: -180C to +800C • Max. recommended belt speed is 30 m/sec • Permissible flex rate f=80 per second • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available

Mfg. range 31” to 900”

Weight/metre (Kgs) 0.301

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 180 dp (mm) C 22 14 40 29 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

C 33 C 35 C 36 C 38 C 40 C 41 C 42 C 43 C 44 C 45 C 46 C 47 C 48 C 49 C 50 C 51 C 52 C 53 C 54 C 55 C 56 C 57 C 58 C 59 C 60 C 61 C 62 C 63 C 64 C 65 C 66 C 67 C 68 C 69 C 70 C 71 C 72 C 73 C 74 C 75 C 76 C 77 C 78 C 79 C 80 C 81 C 82 C 83 C 83.5 C 84 C 85 C 86 C 87 C 88 C 89 C 90 C 91 C 92

840 890 914 965 1016 1041 1065 1090 1120 1143 1168 1190 1220 1250 1270 1300 1320 1350 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2100 2121 2134 2160 2184 2210 2240 2260 2286 2311 2337

894 945 970 1021 1072 1097 1123 1148 1174 1199 1224 1250 1275 1301 1326 1351 1377 1402 1428 1453 1478 1504 1529 1555 1580 1605 1631 1656 1682 1707 1732 1758 1783 1807 1834 1859 1885 1910 1936 1961 1986 2012 2037 2063 2088 2113 2139 2164 2176 2190 2215 2240 2266 2291 2317 2342 2367 2393

C 93 C 94 C 95 C 96 C 97 C 98 C 99 C 100 C 101 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 122 C 124 C 125 C 126 C 127 C 128 C 130 C 131 C 132 C 134 C 135 C 136 C 138 C 139 C 140 C 142 C 144 C 145 C 146 C 147 C 148 C 150 C 152 C 153 C 154 C 157 C 158 C 160 C 161 C 162

2360 2388 2413 2438 2464 2500 2520 2540 2565 2591 2615 2650 2667 2700 2725 2750 2775 2800 2819 2845 2870 2900 2920 2950 2965 3000 3025 3050 3100 3150 3175 3200 3226 3250 3302 3327 3350 3400 3429 3450 3500 3531 3550 3600 3658 3683 3700 3734 3750 3810 3860 3886 3910 3988 4000 4064 4100 4115

2418 2444 2469 2494 2520 2545 2571 2596 2621 2647 2672 2698 2723 2748 2774 2799 2825 2850 2875 2901 2926 2952 2977 3002 3028 3053 3079 3104 3155 3206 3231 3256 3282 3307 3358 3383 3409 3460 3485 3510 3561 3587 3612 3663 3714 3739 3764 3790 3815 3866 3917 3942 3968 4044 4069 4120 4145 4171

• Non standard stock items are available upon request

Belt Reference

C 164 C 165 C 167 C 168 C 170 C 173 C 176 C 177 C 180 C 182 C 184 C 185 C 187 C 188 C 190 C 192 C 195 C 197 C 200 C 203 C 204 C 205 C 208 C 210 C 211 C 212 C 214 C 215 C 216 C 220 C 222 C 224 C 225 C 228 C 232 C 236 C 238 C 240 C 244 C 248 C 250 C 255 C 260 C 264 C 265 C 270 C 276 C 280 C 285 C 294 C 295 C 300 C 315 C 328 C 336 C 360 C 394

Inside Length (mm)

Datum/Pitch Length (mm)

4166 4200 4250 4267 4318 4394 4470 4500 4572 4623 4674 4699 4750 4775 4825 4877 4950 5000 5080 5156 5182 5200 5300 5330 5360 5385 5435 5461 5486 5600 5639 5690 5715 5800 5893 6000 6045 6100 6198 6300 6350 6477 6604 6700 6731 6858 7000 7100 7239 7468 7500 7620 8000 8331 8534 9144 10008

4222 4247 4298 4323 4374 4450 4526 4552 4628 4679 4730 4755 4806 4831 4882 4933 5009 5060 5136 5212 5238 5263 5339 5390 5415 5441 5492 5517 5542 5644 5695 5746 5771 5847 5949 6050 6101 6152 6254 6355 6406 6533 6660 6762 6787 6914 7066 7168 7295 7524 7549 7676 8057 8387 8590 9200 10064

-Xld

X’set® Wrap Construction Belts

Classical Section: D Standard: BS 3790, ISO 4184, IS 2494 Features: • Top width to height ratio 1.6:1 • Temperature range: -180C to +800C • Max. recommended belt speed is 30 m/sec • Permissible flex rate f=80 per second • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available

32 mm

19 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 119 40 79

Mfg. range 44.5” to 900”

D / 32x19 Weight/metre (Kgs) 0.619

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 355 dp (mm) D 32 19 40 18 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: II 2GD c IIB X (Test report no. IB-03-4-934)

D 162 D 167 D 168 D 173 D 177 D 180 D 187 D 190 D 195 D 197 D 204 D 208 D 210 D 220 D 225 D 236 D 240 D 248 D 250 D 255

2568 2721 2746 2873 3000 3076 3127 3229 3330 3432 3508 3533 3635 3686 3737 3838 3889 3940 3991 4092

2500 2650 2667 2800 2920 3000 3050 3150 3250 3350 3429 3450 3550 3600 3658 3750 3810 3860 3910 4000

D 98 D 104 D 105 D 110 D 115 D 118 D 120 D 124 D 128 D 132 D 135 D 136 D 140 D 142 D 144 D 148 D 150 D 152 D 154 D 158

Belt Reference

Datum/Pitch Length (mm)

Inside Length (mm)

Belt Reference

-Xld

4194 4321 4346 4473 4575 4651 4829 4905 5032 5083 5261 5362 5413 5667 5794 6073 6175 6378 6429 6556

4115 4250 4267 4394 4500 4572 4750 4825 4950 5000 5182 5300 5330 5600 5715 6000 6100 6300 6350 6477

Datum/Pitch Length (mm)

Inside Length (mm)

6785 6886 6937 7191 7318 7572 7648 7699 8055 8080 8207 8410 8461 8590 9070 9579 10079 11280

6700 6807 6858 7100 7239 7500 7569 7620 7976 8000 8128 8331 8385 8510 9000 9500 10000 11200

D 264 D 268 D 270 D 280 D 285 D 295 D 298 D 300 D 314 D 315 D 320 D 328 D 330 D 335 D 354 D 374 D 394 D 441

Datum/Pitch Length (mm)

Inside Length (mm)

Belt Reference

X’set® Wrap Construction Belts

Classical Section: 20 Standard: DIN 2215-1975

20 / 20x13

•I

20 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 79 31 48

13.0 mm

Mfg. range 31.5” to 900”

Weight/metre (Kgs) 0.246

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 160 dp (mm) 20 20 13 40 29 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: II 2GD c IIB X (Test report no. IB-03-4-934)

848 948 1048 1108 1168 1228 1298 1368 1448 1548 1648 1748

31.49 35.43 39.37 41.73 44.09 46.46 49.21 51.97 55.12 59.06 62.99 66.93

20 x 0800 20 x 0900 20 x 1000 20 x 1060 20 x 1120 20 x 1180 20 x 1250 20 x 1320 20 x 1400 20 x 1500 20 x 1600 20 x 1700

Datum/Pitch Length (mm)

Inside Length (inches)

Belt Reference 20xLi (mm)

20 x 1800 20 x 1900 20 x 2000 20 x 2100 20 x 2120 20 x 2240 20 x 2280 20 x 2360 20 x 2500 20 x 2650 20 x 2800 20 x 3000

1848 1948 2048 2148 2168 2288 2280 2408 2548 2698 2848 3048

70.87 74.80 78.74 82.67 83.46 88.19 89.76 92.91 98.43 104.33 110.24 118.11

Datum/Pitch Length (mm)

Inside Length (inches)

3198 3398 3598 3798 4048 4298 4548 5048 5348 5648 6048

124.02 131.89 139.76 147.64 157.48 167.32 177.17 196.85 208.66 220.47 236.22

20 x 3150 20 x 3350 20 x 3550 20 x 3750 20 x 4000 20 x 4250 20 x 4500 20 x 5000 20 x 5300 20 x 5600 20 x 6000

Datum/Pitch Length (mm)

Inside Length (inches)

Belt Reference 20xLi (mm)

• Non standard stock items are available upon request

PIX- X’set Wrap Construction Belts ®

Classical Section: 25 Standard: DIN 2215-1975

25 / 25x16 t

Belt length factor (mm) Lp to La Li to Lp Li to La 39 100 61

25 mm 16 mm

Mfg. range 57” to 900”

Weight/metre (Kgs) 0.413

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 250dp (mm) 25 25 16.0 40 26 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference 25xLi (mm)

Inside Length (inches)

Datum/Pitch Length (mm)

Belt Reference 25xLi (mm)

Inside Length (inches)

Datum/Pitch Length (mm)

Belt Reference 25xLi (mm)

Inside Length (inches)

Datum/Pitch Length (mm)

25 x 1400 25 x 1500 25 x 1900 25 x 2000 25 x 2120 25 x 2240 25 x 2360 25 x 2500 25 x 2650 25 x 2700

55.12 59.06 77.20 78.74 83.46 88.18 92.91 98.43 104.33 106.30

1461 1561 1961 2061 2181 2301 2421 2561 2711 2761

25 x 2800 25 x 3000 25 x 3150 25 x 3350 25 x 3550 25 x 3750 25 x 4000 25 x 4250 25 x 4500 25 x 4750

110.24 118.11 124.01 131.89 139.76 147.64 157.48 167.32 177.17 187.01

2861 3061 3211 3411 3611 3811 4061 4311 4561 4811

25 x 5000 25 x 5600 25 x 6000 25 x 6300 25 x 6700 25 x 7100 25 x 7500 25 x 9000

196.85 220.47 236.22 248.03 263.78 279.53 295.27 354.33

5061 5661 6061 6361 6761 7161 7561 9061

PIX- X’set Wrap Construction Belts ®

Classical Section: E Standard: IS 2494

E / 38x23 38 mm 23.0 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 145 53 92

Mfg. range 90” to 900”

Weight/metre (Kgs) 0.885

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 500 dp (mm) E 38 23 40 13 • Nominal Length (inches): Li • ‘PIX FRAS’ Belts conforms to: © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Inside Length (inches)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (inches)

Datum/Pitch Length (mm)

E 118 E 120 E 136 E 158 E 197 E 220 E 233 E 236 E 237 E 245

2997 3048 3454 4013 5004 5588 5918 5994 6020 6223

3089 3140 3546 4105 5096 5680 6010 6086 6112 6315

E 248 E 249 E 251 E 253 E 255 E 261 E 276 E 280 E 292 E 295

6299 6325 6375 6426 6477 6629 7010 7112 7417 7493

6391 6417 6467 6518 6569 6721 7102 7204 7509 7585

• Non standard stock items are available upon request

Belt Reference

E 312 E 315 E 331 E 351 E 354 E 394 E 441 E 490

Inside Length (inches)

Datum/Pitch Length (mm)

7925 8001 8407 8915 8992 10008 11201 12446

8017 8093 8499 9007 9084 10100 11293 12538

PIX- X’set Wrap Construction Belts ®

Wedge Section: SPZ Standard: BS 3790, ISO 4184

SPZ / 10x8 h

Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

10 mm 8 mm

Features: • Top width to height ratio is 1.2:1 • Temperature range: -180C to +800C • Max. recommended belt speed 42 m/sec • Permissible flex rate f=100 per second • Less deformation of belt cross-section • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

Mfg. range Weight/metre (Kgs) 365 to 4000 mm 0.076

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63 dp (mm) SPZ 10 8 40 59 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPZ 487 SPZ 500 SPZ 512 SPZ 530 SPZ 562 SPZ 580 SPZ 587 SPZ 600 SPZ 612 SPZ 625 SPZ 630 SPZ 637 SPZ 662 SPZ 670 SPZ 687 SPZ 700 SPZ 710 SPZ 712 SPZ 722 SPZ 737 SPZ 750 SPZ 760 SPZ 762 SPZ 767 SPZ 772 SPZ 775 SPZ 787 SPZ 800 SPZ 812 SPZ 825 SPZ 837 SPZ 850 SPZ 862 SPZ 875 SPZ 887 SPZ 900 SPZ 912 SPZ 925 SPZ 937 SPZ 940 SPZ 950 SPZ 962 SPZ 975 SPZ 987 SPZ 1000 SPZ 1010 SPZ 1012 SPZ 1024 SPZ 1030 SPZ 1037 SPZ 1047 SPZ 1060 SPZ 1075 SPZ 1077 SPZ 1080 SPZ 1082 SPZ 1087 SPZ 1090 SPZ 1100

487 500 512 530 562 580 587 600 612 625 630 637 662 670 687 700 710 712 722 737 750 760 762 767 772 775 787 800 812 825 837 850 862 875 887 900 912 925 937 940 950 962 975 987 1000 1010 1012 1024 1030 1037 1047 1060 1075 1077 1080 1082 1087 1090 1100

SPZ 1107 SPZ 1112 SPZ 1120 SPZ 1137 SPZ 1140 SPZ 1147 SPZ 1150 SPZ 1157 SPZ 1162 SPZ 1171 SPZ 1180 SPZ 1187 SPZ 1200 SPZ 1202 SPZ 1212 SPZ 1220 SPZ 1237 SPZ 1250 SPZ 1262 SPZ 1270 SPZ 1280 SPZ 1287 SPZ 1300 SPZ 1312 SPZ 1320 SPZ 1337 SPZ 1340 SPZ 1347 SPZ 1350 SPZ 1360 SPZ 1362 SPZ 1375 SPZ 1387 SPZ 1400 SPZ 1412 SPZ 1420 SPZ 1425 SPZ 1437 SPZ 1450 SPZ 1462 SPZ 1470 SPZ 1487 SPZ 1500 SPZ 1512 SPZ 1520 SPZ 1537 SPZ 1550 SPZ 1560 SPZ 1562 SPZ 1580 SPZ 1587 SPZ 1600 SPZ 1612 SPZ 1620 SPZ 1637 SPZ 1650 SPZ 1662 SPZ 1687 SPZ 1700

1107 1112 1120 1137 1140 1147 1150 1157 1162 1171 1180 1187 1200 1202 1212 1220 1237 1250 1262 1270 1280 1287 1300 1312 1320 1337 1340 1347 1350 1360 1362 1375 1387 1400 1412 1420 1425 1437 1450 1462 1470 1487 1500 1512 1520 1537 1550 1560 1562 1580 1587 1600 1612 1620 1637 1650 1662 1687 1700

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

SPZ 1737 SPZ 1750 SPZ 1762 SPZ 1787 SPZ 1800 SPZ 1812 SPZ 1837 SPZ 1850 SPZ 1862 SPZ 1887 SPZ 1900 SPZ 1912 SPZ 1937 SPZ 1950 SPZ 1962 SPZ 1987 SPZ 2000 SPZ 2030 SPZ 2037 SPZ 2050 SPZ 2060 SPZ 2062 SPZ 2087 SPZ 2100 SPZ 2120 SPZ 2125 SPZ 2137 SPZ 2150 SPZ 2160 SPZ 2180 SPZ 2187 SPZ 2237 SPZ 2240 SPZ 2250 SPZ 2262 SPZ 2280 SPZ 2287 SPZ 2300 SPZ 2360 SPZ 2400 SPZ 2410 SPZ 2437 SPZ 2500 SPZ 2580 SPZ 2600 SPZ 2650 SPZ 2690 SPZ 2800 SPZ 2840 SPZ 2900 SPZ 3000 SPZ 3150 SPZ 3250 SPZ 3350 SPZ 3450 SPZ 3550 SPZ 3750

1737 1750 1762 1787 1800 1812 1837 1850 1862 1887 1900 1912 1937 1950 1962 1987 2000 2030 2037 2050 2060 2062 2087 2100 2120 2125 2137 2150 2160 2180 2187 2237 2240 2250 2262 2280 2287 2300 2360 2400 2410 2437 2500 2580 2600 2650 2690 2800 2840 2900 3000 3150 3250 3350 3450 3550 3750

PIX- X’set Wrap Construction Belts ®

Wedge Section: SPA Standard: BS 3790, ISO 4184

SPA / 13x10

Features: • Top width to height ratio is 1.2:1 • Temperature range: -180C to +800C • Maximum recommended belt speed 42 m/sec • Permissible flex rate f=100 per second • Less deformation of belt cross-section • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

I*-

Belt length factor (mm) Lp to La Li to Lp Li to La 18 63 45

13 mm 10 mm

Mfg. range 576 to 9110 mm

Weight/metre (Kgs) 0.122

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 90 dp (mm) SPA 13 10 40 47 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPA 732 SPA 750 SPA 757 SPA 775 SPA 782 SPA 800 SPA 807 SPA 825 SPA 832 SPA 850 SPA 857 SPA 875 SPA 882 SPA 900 SPA 907 SPA 925 SPA 932 SPA 950 SPA 957 SPA 975 SPA 982 SPA 1000 SPA 1007 SPA 1025 SPA 1030 SPA 1032 SPA 1042 SPA 1050 SPA 1060 SPA 1082 SPA 1085 SPA 1090 SPA 1100 SPA 1107 SPA 1120 SPA 1132 SPA 1150 SPA 1157 SPA 1160 SPA 1180 SPA 1182 SPA 1200 SPA 1207 SPA 1220 SPA 1232 SPA 1250 SPA 1257 SPA 1272 SPA 1280 SPA 1282 SPA 1300 SPA 1307 SPA 1320 SPA 1332 SPA 1340 SPA 1357 SPA 1360 SPA 1367

732 750 757 775 782 800 807 825 832 850 857 875 882 900 907 925 932 950 957 975 982 1000 1007 1025 1030 1032 1042 1050 1060 1082 1085 1090 1100 1107 1120 1132 1150 1157 1160 1180 1182 1200 1207 1220 1232 1250 1257 1272 1280 1282 1300 1307 1320 1332 1340 1357 1360 1367

SPA 1382 SPA 1400 SPA 1407 SPA 1425 SPA 1432 SPA 1450 SPA 1457 SPA 1482 SPA 1500 SPA 1507 SPA 1525 SPA 1532 SPA 1550 SPA 1557 SPA 1582 SPA 1600 SPA 1607 SPA 1632 SPA 1650 SPA 1657 SPA 1682 SPA 1700 SPA 1707 SPA 1732 SPA 1750 SPA 1757 SPA 1782 SPA 1800 SPA 1807 SPA 1832 SPA 1850 SPA 1857 SPA 1882 SPA 1900 SPA 1907 SPA 1925 SPA 1932 SPA 1950 SPA 1957 SPA 1982 SPA 1990 SPA 2000 SPA 2032 SPA 2057 SPA 2060 SPA 2082 SPA 2107 SPA 2120 SPA 2125 SPA 2132 SPA 2150 SPA 2157 SPA 2180 SPA 2182 SPA 2207 SPA 2232 SPA 2240 SPA 2250

1382 1400 1407 1425 1432 1450 1457 1482 1500 1507 1525 1532 1550 1557 1582 1600 1607 1632 1650 1657 1682 1700 1707 1732 1750 1757 1782 1800 1807 1832 1850 1857 1882 1900 1907 1925 1932 1950 1957 1982 1990 2000 2032 2057 2060 2082 2107 2120 2125 2132 2150 2157 2180 2182 2207 2232 2240 2250

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

SPA 2267 SPA 2282 SPA 2300 SPA 2307 SPA 2332 SPA 2350 SPA 2360 SPA 2382 SPA 2432 SPA 2482 SPA 2492 SPA 2500 SPA 2532 SPA 2550 SPA 2582 SPA 2607 SPA 2632 SPA 2650 SPA 2682 SPA 2707 SPA 2720 SPA 2732 SPA 2782 SPA 2800 SPA 2832 SPA 2847 SPA 2880 SPA 2882 SPA 2900 SPA 2932 SPA 2982 SPA 3000 SPA 3032 SPA 3070 SPA 3082 SPA 3150 SPA 3182 SPA 3200 SPA 3250 SPA 3282 SPA 3350 SPA 3382 SPA 3450 SPA 3482 SPA 3500 SPA 3550 SPA 3600 SPA 3650 SPA 3670 SPA 3700 SPA 3750 SPA 4000 SPA 4250 SPA 4500 SPA 5000

2267 2282 2300 2307 2332 2350 2360 2382 2432 2482 2492 2500 2532 2550 2582 2607 2632 2650 2682 2707 2720 2732 2782 2800 2832 2847 2880 2882 2900 2932 2982 3000 3032 3070 3082 3150 3182 3200 3250 3282 3350 3382 3450 3482 3500 3550 3600 3650 3670 3700 3750 4000 4250 4500 5000

PIX- X’set®Wrap Construction Belts Wedge Section: SPB Standard: BS 3790, ISO 4184

SPB / 17x14 Belt length factor (mm) Lp to La Li to Lp Li to La 28 88 60

17 mm 14 mm

Mfg. range Weight/metre (Kgs) 1000 to 16824mm 0.215

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140 dp (mm) SPB 17 14 40 36 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPB 1150 SPB 1250 SPB 1260 SPB 1280 SPB 1300 SPB 1320 SPB 1340 SPB 1360 SPB 1400 SPB 1410 SPB 1440 SPB 1450 SPB 1500 SPB 1510 SPB 1540 SPB 1550 SPB 1560 SPB 1590 SPB 1600 SPB 1650 SPB 1690 SPB 1700 SPB 1750 SPB 1780 SPB 1800 SPB 1850 SPB 1900 SPB 1950 SPB 2000

1150 1250 1260 1280 1300 1320 1340 1360 1400 1410 1440 1450 1500 1510 1540 1550 1560 1590 1600 1650 1690 1700 1750 1780 1800 1850 1900 1950 2000

SPB 2020 SPB 2030 SPB 2060 SPB 2120 SPB 2150 SPB 2180 SPB 2200 SPB 2240 SPB 2264 SPB 2275 SPB 2280 SPB 2300 SPB 2310 SPB 2320 SPB 2330 SPB 2360 SPB 2380 SPB 2400 SPB 2410 SPB 2430 SPB 2440 SPB 2450 SPB 2500 SPB 2530 SPB 2540 SPB 2550 SPB 2580 SPB 2600 SPB 2650

2020 2030 2060 2120 2150 2180 2200 2240 2264 2275 2280 2300 2310 2320 2330 2360 2380 2400 2410 2430 2440 2450 2500 2530 2540 2550 2580 2600 2650

SPB 2675 SPB 2680 SPB 2700 SPB 2720 SPB 2750 SPB 2790 SPB 2800 SPB 2840 SPB 2850 SPB 2880 SPB 2900 SPB 2950 SPB 3000 SPB 3070 SPB 3150 SPB 3170 SPB 3200 SPB 3225 SPB 3250 SPB 3270 SPB 3340 SPB 3350 SPB 3450 SPB 3500 SPB 3550 SPB 3620 SPB 3650 SPB 3750 SPB 3800

2675 2680 2700 2720 2750 2790 2800 2840 2850 2880 2900 2950 3000 3070 3150 3170 3200 3225 3250 3270 3340 3350 3450 3500 3550 3620 3650 3750 3800

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

SPB 3825 SPB 3870 SPB 4000 SPB 4050 SPB 4060 SPB 4120 SPB 4250 SPB 4310 SPB 4370 SPB 4500 SPB 4560 SPB 4750 SPB 5000 SPB 5070 SPB 5300 SPB 5380 SPB 5600 SPB 5680 SPB 6000 SPB 6170 SPB 6300 SPB 6700 SPB 7100 SPB 7500 SPB 8000 SPB 8500

3825 3870 4000 4050 4060 4120 4250 4310 4370 4500 4560 4750 5000 5070 5300 5380 5600 5680 6000 6170 6300 6700 7100 7500 8000 8500

PIX- X’set Wrap Construction Belts ®

Wedge Section: SPC Standard: BS 3790, ISO 4184

SPC / 22x18 22 mm 18 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 30 113 83

Mfg. range Weight/metre (Kgs) 1861 to 22943mm 0.367

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 224 dp (mm) SPC 22 18 40 26 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPC 2000 SPC 2120 SPC 2240 SPC 2360 SPC 2500 SPC 2650 SPC 2800 SPC 3000 SPC 3150 SPC 3350 SPC 3550 SPC 3650

2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3650

SPC 3750 SPC 3950 SPC 4000 SPC 4100 SPC 4250 SPC 4380 SPC 4400 SPC 4500 SPC 4650 SPC 4750 SPC 4900 SPC 5000

3750 3950 4000 4100 4250 4380 4400 4500 4650 4750 4900 5000

SPC 5300 SPC 5600 SPC 6000 SPC 6300 SPC 6500 SPC 6700 SPC 6930 SPC 7020 SPC 7100 SPC 7500 SPC 7800 SPC 8000

5300 5600 6000 6300 6500 6700 6930 7020 7100 7500 7800 8000

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

SPC 8500 SPC 9000 SPC 9500 SPC 10000 SPC 10500 SPC 10600 SPC 11200 SPC 12140 SPC 12500

8500 9000 9500 10000 10500 10600 11200 12140 12500

PIX- X’set Wrap Construction Belts ®

Narrow Section: 3V Standard: RMA IP 22

3V / 9.7x8

Features : • Temperature range: -180C to +800C • Max. recommended belt speed is 45 m/sec • Maximum flex rate f=100 per second • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

9.7 mm

h-H

Mfg. range Weight/metre (Kgs) 19.5” to 160” 0.074

8 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63 de (mm) 3V 9.7 8 40 59 • Nominal Length: Belt no /10 = La in inches • ‘PIX FRAS’ Belts conforms to :© II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

3V 250 3V 265 3V 280 3V 300 3V 315 3V 335 3V 355 3V 375

635 673 711 762 800 851 902 953

3V 400 3V 425 3V 450 3V 475 3V 500 3V 530 3V 560 3V 600

1016 1080 1143 1207 1270 1346 1422 1524

3V 630 3V 670 3V 710 3V 750 3V 800 3V 850 3V 900 3V 950

1600 1702 1803 1905 2032 2159 2286 2413

3V 1000 3V 1060 3V 1120 3V 1180 3V 1250 3V 1320 3V 1400

2540 2692 2845 2997 3175 3353 3556

PIX- X’set Wrap Construction Belts ®

Narrow Section: 5V Standard: RMA IP 22

5V / 15.8x14 K

15.8 mm

H 14 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 85 25 60

Mfg. range Weight/metre (Kgs) 47” to 657” 0.202

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140 de (mm) 5V 15.8 14 40 40 Nominal Length: Belt no /10 = La in inches ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

5V 500 5V 530 5V 560 5V 600 5V 630 5V 670 5V 710 5V 750 5V 800

1270 1346 1422 1524 1600 1702 1803 1905 2032

5V 850 5V 900 5V 950 5V 1000 5V 1060 5V 1120 5V 1180 5V 1250 5V 1320

2159 2286 2413 2540 2692 2845 2997 3175 3353

5V 1400 5V 1500 5V 1600 5V 1700 5V 1800 5V 1900 5V 2000 5V 2120 5V 2240

3556 3810 4064 4318 4572 4826 5080 5385 5690

5V 2360 5V 2500 5V 2650 5V 2800 5V 3000 5V 3150 5V 3350 5V 3550 5V 3750

5994 6350 6731 7112 7620 8001 8509 9017 9525

• Non standard stock items are available upon request

PIX- X’set Wrap Construction Belts ®

Narrow Section: 8V Standard: RMA IP 22

8V / 25.4x23 25.4 mm

23 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 145 53 92

Mfg. range Weight/metre (Kgs) 100” to 905” 0.552

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 335 de (mm) 8V 25.4 23 40 23 • Nominal Length: Belt no /10 = La in inches • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

8V 1000 8V 1060 8V 1120 8V 1180 8V 1250 8V 1320 8V 1400 8V 1500

2540 2692 2845 2997 3175 3353 3556 3810

8V 1600 8V 1700 8V 1800 8V 1900 8V 2000 8V 2120 8V 2240 8V 2360

4064 4318 4572 4826 5080 5385 5690 5994

8V 2500 8V 2650 8V 2800 8V 3000 8V 3150 8V 3350 8V 3550 8V 3750

6350 6731 7112 7620 8001 8509 9017 9525

• Non standard stock items are available upon request

Belt Reference

Outside Length (mm)

8V 4000 8V 4250 8V 4500 8V 4750 8V 5000

10160 10795 11430 12065 12700

MUSCLE®- XS3 High Power, Maintenance-free Wrap Belts

5ix AU/SCiE-XS3 SPC320® Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C Product range*: SPZ, SPA, SPB, SPC, 3V, 5V, 8V Application: Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical industry, food processing units

*Can be manufactured in other sections and in banded construction upon request 16

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Wedge Section: MUSCLE-SPZ Standard: PIX Standard Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

8 mm

Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% • Maintenance-free h 10 mm • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

MUSCLE-SPZ

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63 dp (mm) SPZ 10 8 40 59 • Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPZ0750 MUS XS3 SPZ0800 MUS XS3 SPZ0850 MUS XS3 SPZ0900 MUS XS3 SPZ0950 MUS XS3 SPZ1000 MUS XS3 SPZ1060 MUS XS3 SPZ1080 MUS XS3 SPZ1200 MUS XS3 SPZ1212 MUS XS3 SPZ1237 MUS XS3 SPZ1250 MUS XS3 SPZ1262 MUS XS3 SPZ1287 MUS XS3 SPZ1312 MUS XS3 SPZ1320 MUS XS3 SPZ1337 MUS XS3 SPZ1362 MUS XS3 SPZ1387 MUS XS3 SPZ1400 MUS XS3 SPZ1412 MUS XS3 SPZ1437 MUS XS3 SPZ1462 MUS XS3

750 800 850 900 950 1000 1060 1080 1200 1212 1237 1250 1262 1287 1312 1320 1337 1362 1387 1400 1412 1437 1462

SPZ1470 MUS XS3 SPZ1487 MUS XS3 SPZ1500 MUS XS3 SPZ1512 MUS XS3 SPZ1520 MUS XS3 SPZ1537 MUS XS3 SPZ1562 MUS XS3 SPZ1587 MUS XS3 SPZ1600 MUS XS3 SPZ1612 MUS XS3 SPZ1637 MUS XS3 SPZ1650 MUS XS3 SPZ1662 MUS XS3 SPZ1687 MUS XS3 SPZ1700 MUS XS3 SPZ1737 MUS XS3 SPZ1750 MUS XS3 SPZ1762 MUS XS3 SPZ1787 MUS XS3 SPZ1800 MUS XS3 SPZ1837 MUS XS3 SPZ1850 MUS XS3 SPZ1862 MUS XS3

1470 1487 1500 1512 1520 1537 1562 1587 1600 1612 1637 1650 1662 1687 1700 1737 1750 1762 1787 1800 1837 1850 1862

• Non standard stock items are available upon request

Mfg. range Weight/metre (Kgs) 365 to 4000 mm 0.075

Belt Reference

Datum/Pitch Length (mm)

SPZ1887 MUS XS3 SPZ1900 MUS XS3 SPZ1937 MUS XS3 SPZ1987 MUS XS3 SPZ2000 MUS XS3 SPZ2037 MUS XS3 SPZ2120 MUS XS3 SPZ2137 MUS XS3 SPZ2160 MUS XS3 SPZ2187 MUS XS3 SPZ2240 MUS XS3 SPZ2280 MUS XS3 SPZ2287 MUS XS3 SPZ2360 MUS XS3 SPZ2500 MUS XS3 SPZ2650 MUS XS3 SPZ2800 MUS XS3 SPZ3000 MUS XS3 SPZ3150 MUS XS3 SPZ3350 MUS XS3 SPZ3550 MUS XS3

1887 1900 1937 1987 2000 2037 2120 2137 2160 2187 2240 2280 2287 2360 2500 2650 2800 3000 3150 3350 3550

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Wedge Section: MUSCLE-SPA Standard: PIX Standard

10 mm

Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% 13 mm • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

MUSCLE-SPA Belt length factor (mm) Lp to La Li to Lp Li to La 63 18 45

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 90 dp (mm) SPA 13 10 40 47 • Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPA0800 MUS XS3 SPA0850 MUS XS3 SPA0900 MUS XS3 SPA0950 MUS XS3 SPA0957 MUS XS3 SPA1000 MUS XS3 SPA1032 MUS XS3 SPA1120 MUS XS3 SPA1180 MUS XS3 SPA1207 MUS XS3 SPA1232 MUS XS3 SPA1250 MUS XS3 SPA1257 MUS XS3 SPA1272 MUS XS3 SPA1282 MUS XS3 SPA1307 MUS XS3 SPA1320 MUS XS3 SPA1332 MUS XS3 SPA1357 MUS XS3 SPA1382 MUS XS3 SPA1400 MUS XS3 SPA1407 MUS XS3 SPA1432 MUS XS3 SPA1457 MUS XS3 SPA1482 MUS XS3 SPA1500 MUS XS3 SPA1507 MUS XS3 SPA1532 MUS XS3 SPA1557 MUS XS3 SPA1582 MUS XS3 SPA1600 MUS XS3 SPA1607 MUS XS3

800 850 900 950 957 1000 1032 1120 1180 1207 1232 1250 1257 1272 1282 1307 1320 1332 1357 1382 1400 1407 1432 1450 1482 1500 1507 1532 1557 1582 1600 1607

SPA1632 MUS XS3 SPA1657 MUS XS3 SPA1682 MUS XS3 SPA1700 MUS XS3 SPA1707 MUS XS3 SPA1732 MUS XS3 SPA1757 MUS XS3 SPA1782 MUS XS3 SPA1800 MUS XS3 SPA1807 MUS XS3 SPA1832 MUS XS3 SPA1857 MUS XS3 SPA1882 MUS XS3 SPA1900 MUS XS3 SPA1907 MUS XS3 SPA1932 MUS XS3 SPA1957 MUS XS3 SPA1982 MUS XS3 SPA2000 MUS XS3 SPA2032 MUS XS3 SPA2057 MUS XS3 SPA2082 MUS XS3 SPA2120 MUS XS3 SPA2132 MUS XS3 SPA2182 MUS XS3 SPA2207 MUS XS3 SPA2232 MUS XS3 SPA2240 MUS XS3 SPA2282 MUS XS3 SPA2300 MUS XS3 SPA2307 MUS XS3 SPA2332 MUS XS3

1632 1657 1682 1700 1707 1732 1757 1782 1800 1807 1832 1857 1882 1900 1907 1932 1957 1982 2000 2032 2057 2082 2120 2132 2182 2207 2232 2240 2282 2300 2307 2332

• Non standard stock items are available upon request

Mfg. range Weight/metre (Kgs) 576 to 9110 mm 0.120

Belt Reference

Datum/Pitch Length (mm)

SPA2350 MUS XS3 SPA2360 MUS XS3 SPA2382 MUS XS3 SPA2432 MUS XS3 SPA2482 MUS XS3 SPA2500 MUS XS3 SPA2532 MUS XS3 SPA2582 MUS XS3 SPA2607 MUS XS3 SPA2632 MUS XS3 SPA2650 MUS XS3 SPA2682 MUS XS3 SPA2732 MUS XS3 SPA2782 MUS XS3 SPA2800 MUS XS3 SPA2832 MUS XS3 SPA2847 MUS XS3 SPA2882 MUS XS3 SPA2932 MUS XS3 SPA2982 MUS XS3 SPA3000 MUS XS3 SPA3032 MUS XS3 SPA3082 MUS XS3 SPA3150 MUS XS3 SPA3182 MUS XS3 SPA3282 MUS XS3 SPA3350 MUS XS3 SPA3550 MUS XS3 SPA3700 MUS XS3 SPA3750 MUS XS3 SPA4000 MUS XS3

2350 2360 2382 2432 2482 2500 2532 2582 2607 2632 2650 2682 2732 2782 2800 2832 2847 2882 2932 2982 3000 3032 3082 3150 3182 3282 3350 3550 3700 3750 4000

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Wedge Section: MUSCLE-SPB Standard: PIX Standard

14 mm

Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% 17 mm • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 t • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

MUSCLE-SPB

Belt length factor (mm) Lp to La Li to Lp Li to La 28 88 60

Mfg. range Weight/metre (Kgs) 1000 to16824mm 0.213

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140 dp (mm) SPB 17 14 40 36 • Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPB1250 MUS XS3 SPB1320 MUS XS3 SPB1340 MUS XS3 SPB1400 MUS XS3 SPB1450 MUS XS3 SPB1500 MUS XS3 SPB1550 MUS XS3 SPB1600 MUS XS3 SPB1650 MUS XS3 SPB1700 MUS XS3 SPB1750 MUS XS3 SPB1800 MUS XS3 SPB1850 MUS XS3 SPB1900 MUS XS3 SPB2000 MUS XS3 SPB2120 MUS XS3

1250 1320 1340 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 2000 2120

SPB2150 MUS XS3 SPB2240 MUS XS3 SPB2280 MUS XS3 SPB2360 MUS XS3 SPB2410 MUS XS3 SPB2500 MUS XS3 SPB2650 MUS XS3 SPB2800 MUS XS3 SPB2840 MUS XS3 SPB3000 MUS XS3 SPB3150 MUS XS3 SPB3250 MUS XS3 SPB3350 MUS XS3 SPB3450 MUS XS3 SPB3550 MUS XS3 SPB3750 MUS XS3

2150 2240 2280 2360 2410 2500 2650 2800 2840 3000 3150 3250 3350 3450 3550 3750

SPB3800 MUS XS3 SPB3850 MUS XS3 SPB4000 MUS XS3 SPB4250 MUS XS3 SPB4500 MUS XS3 SPB4750 MUS XS3 SPB5000 MUS XS3 SPB5300 MUS XS3 SPB5600 MUS XS3 SPB6000 MUS XS3 SPB6300 MUS XS3 SPB6700 MUS XS3 SPB7100 MUS XS3 SPB7500 MUS XS3 SPB8000 MUS XS3

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Wedge Section: MUSCLE-SPC Standard: PIX Standard

3800 3850 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 7500 8000

MUSCLE-SPC 18 mm

Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% 22 mm • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

Datum/Pitch Length (mm)

Belt Reference

Belt length factor (mm) Lp to La Li to Lp Li to La 113 30 83

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 224 dp (mm) SPC 22 18 40 26 • Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

SPC2000 MUS XS3 SPC2120 MUS XS3 SPC2240 MUS XS3 SPC2360 MUS XS3 SPC2500 MUS XS3 SPC2650 MUS XS3 SPC2800 MUS XS3 SPC3000 MUS XS3 SPC3150 MUS XS3 SPC3350 MUS XS3 SPC3550 MUS XS3

2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550

SPC3750 MUS XS3 SPC4000 MUS XS3 SPC4250 MUS XS3 SPC4500 MUS XS3 SPC4750 MUS XS3 SPC4900 MUS XS3 SPC5000 MUS XS3 SPC5300 MUS XS3 SPC5600 MUS XS3 SPC6000 MUS XS3 SPC6300 MUS XS3

3750 4000 4250 4500 4750 4900 5000 5300 5600 6000 6300

• Non standard stock items are available upon request

Mfg. range Weight/metre (Kgs) 1861 to 22943mm 0.384

Belt Reference

SPC6500 MUS XS3 SPC6700 MUS XS3 SPC7100 MUS XS3 SPC7500 MUS XS3 SPC7800 MUS XS3 SPC7900 MUS XS3 SPC8000 MUS XS3 SPC8500 MUS XS3 SPC9000 MUS XS3 SPC9500 MUS XS3 SPC10000 MUS XS3

Datum/Pitch Length (mm)

6500 6700 7100 7500 7800 7900 8000 8500 9000 9500 10000

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Narrow Section: MUSCLE-3V Standard: PIX Standard Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

8 mm

Features: • Extremely high power rating - up to 50% more than regular Belt • High efficiency up to 98% 9.7 mm • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

MUSCLE-3V

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63 de (mm) 3V 9.7 8 40 59 • Nominal Length: Belt no /10 = ‘La’ in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

3V0475 MUS XS3 3V0500 MUS XS3 3V0530 MUS XS3 3V0560 MUS XS3 3V0600 MUS XS3 3V0630 MUS XS3 3V0670 MUS XS3

1207 1270 1346 1422 1524 1600 1702

3V0710 MUS XS3 3V0750 MUS XS3 3V0800 MUS XS3 3V0850 MUS XS3 3V0900 MUS XS3 3V0950 MUS XS3 3V1000 MUS XS3

1803 1905 2032 2159 2286 2413 2540

PIX- MUSCLE

Mfg. range Weight/metre (Kgs) 19.5” to 160” 0.075

Belt Reference

Outside Length (mm)

3V1060 MUS XS3 3V1120 MUS XS3 3V1180 MUS XS3 3V1250 MUS XS3 3V1320 MUS XS3 3V1400 MUS XS3

2692 2845 2997 3175 3353 3556

-XS3 High Power, Maintenance-free Belts

Narrow Section: MUSCLE-5V Standard: PIX Standard

MUSCLE-5V

Features: • Extremely high power rating - up to 50% more than regular Belt 15.8 mm • High efficiency up to 98% h H • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 JL • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

14 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 85 25 60

Mfg. range Weight/metre (Kgs) 47” to 657” 0.211

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140 de (mm) 5V 15.8 14 40 40 • Nominal Length: Belt no /10 = ‘La’ in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

5V0530 MUS XS3 5V0560 MUS XS3 5V0600 MUS XS3 5V0630 MUS XS3 5V0670 MUS XS3 5V0710 MUS XS3 5V0750 MUS XS3 5V0800 MUS XS3 5V0850 MUS XS3 5V0900 MUS XS3 5V0950 MUS XS3

1346 1422 1524 1600 1702 1803 1905 2032 2159 2286 2413

5V1000 MUS XS3 5V1060 MUS XS3 5V1120 MUS XS3 5V1180 MUS XS3 5V1250 MUS XS3 5V1320 MUS XS3 5V1400 MUS XS3 5V1500 MUS XS3 5V1600 MUS XS3 5V1700 MUS XS3 5V1800 MUS XS3

2540 2692 2845 2997 3175 3353 3556 3810 4064 4318 4572

• Non standard stock items are available upon request

Belt Reference

Outside Length (mm)

5V1900 MUS XS3 5V2000 MUS XS3 5V2120 MUS XS3 5V2240 MUS XS3 5V2360 MUS XS3 5V2500 MUS XS3 5V2650 MUS XS3 5V2800 MUS XS3 5V3150 MUS XS3

4826 5080 5385 5690 5994 6350 6731 7112 8001

PIX- MUSCLE®-XS3 High Power, Maintenance-free Belts Narrow Section: MUSCLE-8V Standard: PIX Standard Belt length factor (mm) Lp to La Li to Lp Li to La 53 145 92

23 mm

Features: • Extremely high power rating - up to 50% more than regular Belt 25.4 mm • High efficiency up to 98% • Maintenance-free • Extended service life & less machine down-time • Antistatic complies with ISO 1813 • Superior oil & heat resistance • REACH & RoHS compliant, provides an eco-friendly system • Extended temperature range from -25°C to +100°C

MUSCLE-8V Mfg. range Weight/metre (Kgs) 100” to 905” 0.580

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 335 de (mm) 8V 25.4 23 40 23 • Nominal Length: Belt no /10 = ‘La’ in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

8V1000 MUS XS3 8V1120 MUS XS3 8V1180 MUS XS3 8V1250 MUS XS3 8V1320 MUS XS3 8V1400 MUS XS3 8V1500 MUS XS3 8V1600 MUS XS3 8V1700 MUS XS3

2540 2845 2997 3175 3353 3556 3810 4064 4318

8V1800 MUS XS3 8V1900 MUS XS3 8V2000 MUS XS3 8V2120 MUS XS3 8V2240 MUS XS3 8V2360 MUS XS3 8V2500 MUS XS3 8V2650 MUS XS3 8V2800 MUS XS3

4572 4826 5080 5385 5690 5994 6350 6731 7112

8V3000 MUS XS3 8V3150 MUS XS3 8V3350 MUS XS3 8V3550 MUS XS3 8V3750 MUS XS3 8V4000 MUS XS3 8V4250 MUS XS3 8V4500 MUS XS3 8V4750 MUS XS3

7620 8001 8509 9017 9525 10160 10795 11430 12065

• Non standard stock items are available upon request

DUO®-XS Double-sided Belts

■■

r.T.i

' .'-yjflii -'-I.

PIX- *Wjrs BB104 i’ESSkSf

The Hexagonal Belt or Double Sided V-Belt is a specially constructed Belt, which provides wedging action from both the sides of the belt. The construction of a doublesided or hexagonal belt resembles two V-Belts banded back-to-back. The tensile member runs through the very centre of the belt’s overall depth. This range of Belts is manufactured in AA, BB, CC and 25 sections; conforming to international standards IS 11038, ISO 5289, RAM IP 21. The Belt is wrapped with a strong, wear resistant, bias cut, neoprene rubberised fabric. These Belts give a solution for drives incorporating multiple pulleys in a plane with different direction of rotations - sometimes known as “serpentine” drives. Using both sides of the Belt, it is possible to transmit power to and from pulleys rotating clockwise and anti-clockwise directions. These Belts are most commonly found on the “deck” drive or large grass cutters, but they are used in many other industrial and agricultural applications. Features: ? Antistatic, oil and heat resistant ? Temperature range: -18°C to +80°C ? Maximum Belt linear speed: 30 m/sec

PIX- Duo

-XS Double Sided Belts

Section: AA Standard: IS 11038, ISO 5289

AA / 13x10

Features : • Temperature range : -180C to +800C • Maximum recommended belt speed is 30 m/sec • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

I-

Mfg. range Weight/metre (Kgs) 46” to 254” 0.155

13 mm 10 mm

Rec. min MOQ Angle Dimensions (mm) Top width Thickness (Degree) pulley dia. (No. of V-Belts) 80mm (dp) AA 13 10 40 45 • Nominal Length (Inches): Li Section

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

AA 43 AA 45 AA 51 AA 54 AA 58 AA 60 AA 64 AA 65 AA 66 AA 68 AA 70 AA 71 AA 72 AA 73

1128 1179 1331 1408 1509 1560 1662 1687 1712 1763 1814 1839 1865 1890

43 45 51 54 58 60 64 65 66 68 70 71 72 73

AA 74 AA 75 AA 76 AA 77 AA 78 AA 79 AA 80 AA 81 AA 83 AA 84 AA 85 AA 86 AA 87 AA 88

1916 1941 1966 1992 2017 2043 2068 2093 2144 2170 2195 2220 2246 2271

74 75 76 77 78 79 80 81 83 84 85 86 87 88

AA 90 AA 91 AA 93 AA 95 AA 96 AA 101 AA 102 AA 103 AA 103.5 AA 105 AA 107 AA 108 AA 109 AA 112

2322 2347 2398 2449 2474 2601 2627 2652 2665 2703 2754 2779 2805 2881

90 91 93 95 96 101 102 103 103.5 105 107 108 109 112

AA 114 AA 118 AA 120 AA 125 AA 128 AA 131 AA 136 AA 146 AA 148 AA 152 AA 163 AA 180 AA 185

2932 3033 3084 3211 3287 3363 3490 3744 3795 3897 4176 4608 4735

114 118 120 125 128 131 136 146 148 152 163 180 185

PIX- Duo

-XS Double Sided Belts

Section: BB Standard: IS 11038, ISO 5289

BB / 17x14 I-

17 mm 14 mm

Features : • Temperature range : -180C to +800C • Maximum recommended belt speed is 30 m/sec • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

Mfg. range Weight/metre (Kgs) 40” to 900” 0.238

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 125mm (dp) BB 17 14 40 36 • Nominal Length (Inches) : Li

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

BB 51 BB 56 BB 68 BB 71 BB 75 BB 83 BB 88 BB 90 BB 93 BB 95

1338 1465 1770 1846 1948 2151 2278 2329 2405 2456

51 56 68 71 75 83 88 90 93 95

BB 97 BB 101 BB 105 BB 111 BB 112 BB 115 BB 116 BB 122 BB 123 BB 124

2507 2608 2710 2862 2888 2964 2989 3142 3167 3193

97 101 105 111 112 115 116 122 123 124

BB 126 BB 127 BB 128 BB 131 BB 133 BB 135 BB 136 BB 138 BB 144 BB 145

3243 3269 3294 3370 3421 3472 3497 3548 3701 3726

126 127 128 131 133 135 136 138 144 145

BB 148 BB 155 BB 162 BB 173 BB 174 BB 177 BB 180 BB 194 BB 195

3802 3980 4158 4437 4463 4539 4615 4971 4996

148 155 162 173 174 177 180 194 195

PIX- Duo

-XS Double Sided Belts

Section: CC Standard: IS 11038, ISO 5289

CC / 22x17

Features : • Temperature range : -180C to +800C • Maximum recommended belt speed is 30 m/sec • Antistatic, oil & heat resistant • ATEX certified FRAS Belts are also available

Belt Reference

Pitch Length (mm)

CC 94 CC 96

2444 2494

Li (inches)

94 96

17 mm

22 mm

Mfg. range Weight/metre (Kgs) 73” to 900” 0.385 Dimensions (mm) Rec. min MOQ Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 224mm (dp) 26 CC 22 17 40 • Nominal Length (Inches) : Li

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

Belt Reference

Pitch Length (mm)

Li (inches)

CC 119 CC 122

3079 3155

119 122

CC 144 CC 162

3714 4171

144 162

CC 173 CC 193

4450 4958

173 193

• Non standard stock items are available upon request

DuraBand®-XS Wrap Banded Belts

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length, as observed in multiple single-Belt drive • Temperature range: -18°C to +80°C • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Manufactured through a single-stage-curing process Application: Vertical shaft drives, agricultural drives, stone crushers, compressors, generator sets etc.

Note: B, C, D, E, SPC & 8V section Belts in banded construction can be supplied up to 1000" or 25400mm 24

PIX- DuraBand -XS Banded Belts ®

Section: HA Standard: ISO 5291, BS 3790

HA / 13x10 Mfg. range Weight/metre (Kgs) 33” to 255” 0.159

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length • Temperature range: -18°C to +80°C • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Manufactured through a single-stage-curing process

10 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 71mm (de) Page no.31 HA 13 10 40 ‘e’ = 15.9 mm, Length designation: ‘Li’ (inches) 13 mm

HA 33 HA 51 HA 56 HA 57 HA 59 HA 64 HA 67 HA 71 HA 75 HA 79 HA 98 HA 100 HA 104 HA 112 HA 120 HA 128

Li (mm)

838 1295 1422 1448 1499 1626 1702 1803 1905 2007 2489 2540 2642 2845 3048 3251

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

888 1345 1472 1498 1549 1676 1752 1853 1955 2057 2539 2590 2692 2895 3098 3301

35 53 58 59 61 66 69 73 77 81 100 102 106 114 122 130

HA 144 HA 157 HA 167 HA 187 HA 190 HA 194 HA 198 HA 200 HA 204 HA 206 HA 208 HA 210 HA 214 HA 216 HA 218 HA 220

3658 3988 4242 4750 4826 4928 5029 5080 5182 5232 5283 5334 5436 5486 5537 5588

3708 4038 4292 4800 4876 4978 5079 5130 5232 5282 5333 5384 5486 5536 5587 5638

146 159 169 189 192 196 200 202 206 208 210 212 216 218 220 222

HA 224 HA 226 HA 228 HA 230 HA 234 HA 236 HA 238 HA 240 HA 244 HA 246 HA 250 HA 252 HA 255

5690 5740 5791 5842 5944 5994 6045 6096 6198 6248 6350 6401 6477

5740 5790 5841 5892 5994 6044 6095 6146 6248 6298 6400 6451 6527

226 228 230 232 236 238 240 242 246 248 252 254 257

PIX- DuraBand®-XS Banded Belts Section: HB Standard: ISO 5291, BS 3790

HB / 17x13

Mfg. range Weight/metre (Kgs) 43” to 370” 0.235

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 112mm (de) Page no.31 HB 17 13 40 ‘e’ = 19 mm, Length designation: ‘Li’ (inches) 17 mm

13 mm

Belt Ref.

Li (mm)

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

HB 47 HB 63 HB 64 HB 71 HB 72 HB 73 HB 74 HB 75 HB 76 HB 77 HB 78 HB 79 HB 80 HB 81 HB 83 HB 84 HB 85 HB 86

1194 1600 1626 1803 1829 1854 1880 1905 1930 1956 1981 2007 2032 2057 2108 2134 2159 2184

1263 1669 1695 1872 1898 1923 1949 1974 1999 2025 2050 2076 2101 2126 2177 2203 2228 2253

50 66 67 74 75 76 77 78 79 80 81 82 83 84 86 87 88 89

HB 87 HB 88 HB 89 HB 90 HB 92 HB 93 HB 94 HB 95 HB 96 HB 97 HB 98 HB 105 HB 112 HB 116 HB 117 HB 120 HB 124 HB 126

2210 2235 2261 2286 2337 2362 2388 2413 2438 2464 2489 2667 2845 2946 2972 3048 3150 3200

2279 2304 2330 2355 2406 2431 2457 2482 2507 2533 2558 2736 2914 3015 3041 3117 3219 3269

90 91 92 93 95 96 97 98 99 100 101 108 115 119 120 123 127 129

HB 128 HB 136 HB 140 HB 144 HB 146 HB 148 HB 158 HB 162 HB 167 HB 177 HB 187 HB 195 HB 197 HB 208 HB 220 HB 370

3251 3454 3556 3658 3708 3759 4013 4115 4242 4496 4750 4953 5004 5283 5588 9398

3320 3523 3625 3727 3777 3828 4082 4184 4311 4565 4819 5022 5073 5352 5657 9467

131 139 143 147 149 151 161 165 170 180 190 198 200 211 223 373

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

PIX- DuraBand -XS Banded Belts Section: HC Standard: ISO 5291, BS 3790 ®

HC / 22x16

Mfg. range Weight/metre (Kgs) 47” to 900” 0.409

16 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) HC 16 22 40 180mm (de) Page no.31 ‘e’ = 25.5 mm, Length designation: ‘Li’ (inches) 22 mm

Belt Ref.

Li (mm)

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

Belt Ref.

Li (mm)

La (mm)

La (inches)

HC 47 HC 68 HC 78 HC 80 HC 88 HC 89 HC 90 HC 94 HC 96 HC 97 HC 98 HC 99 HC 100 HC 105 HC 108 HC 109 HC 110 HC 112 HC 114

1194 1727 1981 2032 2235 2261 2286 2388 2438 2464 2489 2515 2540 2667 2743 2769 2794 2845 2896

1282 1815 2069 2120 2323 2349 2374 2476 2526 2552 2577 2603 2628 2755 2831 2857 2882 2933 2984

50 71 81 83 91 92 93 97 99 100 101 102 103 108 111 112 113 115 117

HC 118 HC 120 HC 124 HC 126 HC 128 HC 132 HC 136 HC 140 HC 144 HC 146 HC 148 HC 150 HC 151 HC 154 HC 158 HC 160 HC 162 HC 167 HC 168

2997 3048 3150 3200 3251 3353 3454 3556 3658 3708 3759 3810 3835 3912 4013 4064 4115 4242 4267

3085 3136 3238 3288 3339 3441 3542 3644 3746 3796 3847 3898 3923 4000 4101 4152 4203 4330 4355

121 123 127 129 131 135 139 143 147 149 151 153 154 157 161 163 165 170 171

HC 177 HC 180 HC 186 HC 187 HC 190 HC 197 HC 205 HC 208 HC 210 HC 220 HC 225 HC 236 HC 238 HC 240 HC 248 HC 260 HC 270 HC 300 HC 315

4496 4572 4724 4750 4826 5004 5207 5283 5334 5588 5715 5588 6045 6096 6299 6604 6858 7620 8001

4584 4660 4812 4838 4914 5092 5295 5371 5422 5676 5803 5676 6133 6184 6387 6692 6946 7708 8089

180 183 189 190 193 200 208 211 213 223 228 239 241 243 251 263 273 303 318

PIX- DuraBand -XS Banded Belts Section: HD Standard: ISO 5291, BS 3790 ®

HD / 32x21.5

Mfg.range Weight/metre (Kgs) 90” to 900” 0.835

21.5 mm

Rec. Min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) Pulley Dia. (No. of V-Belts) 355mm (de) Page no.31 HD 32 21.5 40 ‘e’ = 37 mm, Length designation: ‘Li’ (inches) 32 mm

Belt Ref.

Li (mm)

La (mm)

La (inch)

Belt Ref.

Li (mm)

La (mm)

La (inch)

Belt Ref.

Li (mm)

La (mm)

La (inch)

HD 90 HD 98 HD 110 HD 120 HD 128 HD 144 HD 158 HD 162 HD 173 HD 180

2286 2489 2794 3048 3251 3658 4013 4115 4394 4572

2405 2608 2913 3167 3370 3777 4132 4234 4513 4691

95 103 115 125 133 149 163 167 178 185

HD 195 HD 210 HD 225 HD 240 HD 255 HD 270 HD 285 HD 300 HD 330 HD 360

4953 5334 5715 6096 6477 6858 7239 7620 8382 9144

5072 5453 5834 6215 6596 6977 7358 7739 8501 9263

200 215 230 245 260 275 290 305 335 365

HD 390 HD 420 HD 450 HD 480 HD 540 HD 600 HD 660 HD 700

9906 10668 11430 12192 13716 15240 16764 17780

10025 10787 11549 12311 13835 15359 16883 17899

395 425 455 485 545 605 665 705

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

PIX- DuraBand -XS Banded Belts Section: HSPZ Standard: BS 3790 ®

HSPZ / 10x10

10 mm

Mfg. range Weight/metre (Kgs) 1205 to 9080mm 0.107 Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63de (mm) Page no.31 HSPZ 10 10 40 ‘e’ = 12.0 mm, Length designation: ‘Lp’ 10 mm

_e_

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HSPZ 1000 HSPZ 1500 HSPZ 2000 HSPZ 2120 HSPZ 2240 HSPZ 2360 HSPZ 2500

1000 1500 2000 2120 2240 2360 2500

HSPZ 2650 HSPZ 2800 HSPZ 3000 HSPZ 3150 HSPZ 3350 HSPZ 3550 HSPZ 3750

2650 2800 3000 3150 3350 3550 3750

HSPZ 4000 HSPZ 4250 HSPZ 4500 HSPZ 4750 HSPZ 5000

4000 4250 4500 4750 5000

Banded Belts

HSPA / 13x12

Mfg. range Weight/metre (Kgs) 959 to 4515mm 0.157

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 90mm (de) HSPA 13 12 40 Page no.31 ‘e’ = 15.0 mm, Length designation: ‘Lp’ 13 mm ;

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HSPA 1000 HSPA 1500 HSPA 1700 HSPA 1900 HSPA 2000 HSPA 2120 HSPA 2240

1000 1500 1700 1900 2000 2120 2240

HSPA 2360 HSPA 2500 HSPA 2650 HSPA 2800 HSPA 3000 HSPA 3150 HSPA 3350

2360 2500 2650 2800 3000 3150 3350

HSPA 3550 HSPA 3750 HSPA 4000 HSPA 4250 HSPA 4500 HSPA 4750 HSPA 5000

3550 3750 4000 4250 4500 4750 5000

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

12 mm

PIX- DuraBand®-XS Section: HSPA Standard: BS 3790

PIX- DuraBand -XS Section: HSPB Standard: BS 3790 ®

Banded Belts

HSPB / 17x16

Mfg. range Weight/metre (Kgs) 1762 to 9331mm 0.260

16 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140mm (de) HSPB 17 16 40 Page no.31 ‘e’ = 19 mm, Length designation: ‘Lp’ 17 mm

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HSPB 2000 HSPB 2120 HSPB 2240 HSPB 2360 HSPB 2500 HSPB 2650 HSPB 2800 HSPB 3000 HSPB 3150

2000 2120 2240 2360 2500 2650 2800 3000 3150

HSPB 3350 HSPB 3550 HSPB 3750 HSPB 4000 HSPB 4250 HSPB 4500 HSPB 4750 HSPB 5000 HSPB 5300

3350 3550 3750 4000 4250 4500 4750 5000 5300

HSPB 5600 HSPB 6000 HSPB 6300 HSPB 6500 HSPB 6700 HSPB 7100 HSPB 7500 HSPB 8000

5600 6000 6300 6500 6700 7100 7500 8000

PIX- DuraBand -XS Banded Belts ®

Section: HSPC Standard: BS 3790

HSPC / 22x20

Mfg. range Weight/metre (Kgs) 2267-22943 mm 0.459

Dimensions (mm) Angle (Deg) Top width Thickness HSPC 22 20 40 ‘e’ = 25.5 mm, Length designation: ‘Lp’

Rec. min MOQ pulley dia. (No. of V-Belts) 224dp (mm) Page no.31 22 mm

20 mm

Section

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HSPC 2550 HSPC 2750 HSPC 2800 HSPC 3000 HSPC 3100 HSPC 3350 HSPC 3750 HSPC 4000 HSPC 4250

2550 2750 2800 3000 3100 3350 3750 4000 4250

HSPC 4500 HSPC 4750 HSPC 5000 HSPC 5300 HSPC 5600 HSPC 6000 HSPC 6300 HSPC 6700 HSPC 7100

4500 4750 5000 5300 5600 6000 6300 6700 7100

HSPC 7300 HSPC 7500 HSPC 8000 HSPC 8500 HSPC 9500 HSPC 10000 HSPC 11200 HSPC 11800

7300 7500 8000 8500 9500 10000 11200 11800

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

PIX- DuraBand

-XS

Banded Belts

Section: H3V Standard: ISO 5290

H3V / 9.7x10

Mfg. range Weight/metre (Kgs) 37” to 180” 0.091

10 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63mm (de) H3V 9.7 10 40 Page no.31 ‘e’ = 10.3 mm, Length designation: ‘La’ 9.7 mm

Belt Reference

La (mm)

Belt Reference

La (mm)

Belt Reference

La (mm)

H3V 400 9J H3V 450 9J H3V 500 9J H3V 530 9J H3V 560 9J H3V 600 9J H3V 630 9J H3V 670 9J

1016 1143 1270 1346 1422 1524 1600 1702

H3V 710 9J H3V 750 9J H3V 800 9J H3V 850 9J H3V 900 9J H3V 950 9J H3V 1000 9J H3V 1060 9J

1803 1905 2032 2159 2286 2413 2540 2692

H3V 1120 9J H3V 1180 9J H3V 1250 9J H3V 1320 9J H3V 1400 9J H3V 1520 9J H3V 1800 9J

2845 2997 3175 3353 3556 3861 4572

PIX- DuraBand

-XS

Banded Belts

Section: H5V Standard: ISO 5290

H5V / 15.8x16

16 mm

Mfg. range Weight/metre (Kgs) 51” to 663” 0.235 Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140mm (de) Page no.31 H5V 15.8 16 40 ‘e’ = 17.5 mm, Length designation: ‘La’ 15.8 mm

Belt Reference

La (mm)

Belt Reference

La (mm)

H5V 500 15J H5V 530 15J H5V 560 15J H5V 600 15J H5V 630 15J H5V 670 15J H5V 710 15J H5V 750 15J H5V 800 15J H5V 835 15J H5V 850 15J H5V 900 15J H5V 950 15J

1270 1346 1422 1524 1600 1702 1803 1905 2032 2121 2159 2286 2413

H5V 1000 15J H5V 1060 15J H5V 1120 15J H5V 1180 15J H5V 1250 15J H5V 1320 15J H5V 1400 15J H5V 1500 15J H5V 1550 15J H5V 1600 15J H5V 1700 15J H5V 1720 15J H5V 1800 15J

2540 2692 2845 2997 3175 3353 3556 3810 3937 4064 4318 4369 4572

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

Belt Reference

H5V 1900 15J H5V 1950 15J H5V 2000 15J H5V 2120 15J H5V 2240 15J H5V 2360 15J H5V 2500 15J H5V 2650 15J H5V 2800 15J H5V 3000 15J H5V 3150 15J H5V 3350 15J H5V 3550 15J

La (mm)

4826 4953 5080 5385 5690 5994 6350 6731 7112 7620 8001 8509 9017

PIX- DuraBand -XS Section: H8V Standard: ISO 5290 ®

Banded Belts

H8V / 25.4x25

Mfg. range Weight/metre (Kgs) 100” to 905” 0.604

25 mm

Rec. Min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) Pulley Dia. (No. of V-Belts) 335de (mm) Page no.31 H8V 25.4 25 40 ‘e’ = 28.6 mm, Length designation: ‘La’ 25.4 mm

e_ Belt Reference

La (mm)

Belt Reference

La (mm)

Belt Reference

La (mm)

H8V 1000 25J H8V 1060 25J H8V 1120 25J H8V 1180 25J H8V 1250 25J H8V 1320 25J H8V 1400 25J H8V 1500 25J H8V 1600 25J H8V 1700 25J

2540 2692 2845 2997 3175 3353 3556 3810 4064 4318

H8V 1800 25J H8V 1900 25J H8V 2000 25J H8V 2120 25J H8V 2240 25J H8V 2360 25J H8V 2500 25J H8V 2650 25J H8V 2800 25J H8V 3000 25J

4572 4826 5080 5385 5690 5994 6350 6731 7112 7620

H8V 3150 25J H8V 3350 25J H8V 3550 25J H8V 3750 25J H8V 3940 25J H8V 4000 25J H8V 4250 25J H8V 4500 25J H8V 4750 25J H8V 5000 25J

8001 8509 9017 9525 10008 10160 10795 11430 12065 12700

Standard Designation

4 HC 350

4 No. of Bands

4 HSPB 2500 4

350

C H Section denotes Banded Belt

350” Li

No. of Bands

4 H3V 400 4

No. of Bands

H3V

400

3V H Section denotes Banded Belt

• Non standard stock items are available upon request

40”La

HSPB

2500

H SPB 2500 mm denotes Section Lp Banded Belt

Minimum Order Quantities Banded Belts HA

Belt Reference

Minimum Quantity

2HA 3HA 4HA 5HA 6HA 7HA 8HA 9 - 10HA

17 11 8 7 5 5 4 3

HSPZ

Belt Reference

Minimum Quantity

2HB 3HB 4HB 5HB 6HB 7HB 8 - 9HB 10HB

18 12 9 7 6 5 4 3

2HC 3HC 4HC 5HC 6HC 7HC 8HC 9 - 10HC

11 7 5 4 3 3 2 2

HSPA

Belt Reference

Minimum Quantity

2HSPZ 3HSPZ 4HSPZ 5HSPZ 6HSPZ 7HSPZ 8 - 9HSPZ 10HSPZ

23 15 11 9 7 6 5 4

2H3V 3H3V 4H3V 5H3V 6H3V 7 - 8H3V 9 - 10H3V

2HD 3HD 4HD 5HD 6HD 7HD 8 - 10HD

Belt Reference

2HSPA 3HSPA 4HSPA 5HSPA 6HSPA 7HSPA 8 - 9HSPA 10 HSPA

23 15 11 9 7 6 5 4

2HSPB 3HSPB 4HSPB 5HSPB 6HSPB 7HSPB 8 - 9HSPB 10HSPB

14 9 7 5 4 4 3 2

20 13 10 8 6 5 4

2H5V 3H5V 4H5V 5H5V 6H5V 7H5V 8 - 10H5V

15 10 7 6 5 4 3

Minimum Quantity

Belt Reference

2HSPC 3HSPC 4HSPC 5HSPC 6HSPC 7HSPC 8 - 9HSPC 10HSPC

10 7 5 4 3 3 2 2

H8V Minimum Quantity

Belt Reference

7 5 3 3 2 2 1

HSPC Minimum Quantity

H5V Minimum Quantity

Minimum Quantity

Belt Reference

HSPB Minimum Quantity

H3V Belt Reference

Minimum Quantity

Belt Reference

2H8V 3H8V 4H8V 5H8V 6H8V 7 - 10H8V

Minimum Quantity

10 6 5 4 3 2

GALLANT®-XS Heavy Duty High Power Belts

■j

Features: • Enhanced power transmission capacity- Up to 55% in PIX-Gallant®-HXS Banded Belts • Especially treated outer tough cover reduces sidewall-wear and withstands to sudden shear forces at peak loads • Designed to exhibit excellent durability, strength, abrasion and wear resistance • Unique performance under heavy shock and impulse loads • Low heat generation, even at very high speed • Best solution for compact drives as lesser number of Belts are required • Operating temperature range: -25°C to +100°C Product range*: HSPA, HSPB, HSPC, H5V, H8V sections Application: Forestry woodcutters, surface miners, stackers, excavators, re-claimers, stone crushers, jaw crushers, cone crushers, ball-mills, pumps, VRMs

*Banded Belts in HB and HC sections can be provided on request. 32

PIX- GALLANT -HXS Section: GALLANT-HSPB Standard: PIX Standard ®

Heavy Duty High Power Belts

GALLANT-HSPB

Lp (mm)

Belt Reference

GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB

2000 2120 2240 2360 2500 2650 2800 3000 3150

PIX- GALLANT

2000 2120 2240 2360 2500 2650 2800 3000 3150

-HXS Section: GALLANT-HSPC Standard: PIX Standard

Mfg. range Weight/metre (Kgs) 1762 to 9331mm 0.690

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140mm (de) Page no.31 HSPB 17 16 40 ‘e’ = 19 mm, Length designation: ‘Lp’ 17 mm

16 mm

Section

Lp (mm)

Belt Reference

GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB

3350 3550 3750 4000 4250 4500 4750 5000 5300

Lp (mm)

Belt Reference

GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB GL-HSPB

5600 6000 6300 6700 7100 7500 8000

Heavy Duty High Power Belts

GALLANT-HSPC

Belt Reference

Lp (mm)

GL-HSPC 2500 GL-HSPC 2650 GL-HSPC 2800 GL-HSPC 3000 GL-HSPC 3150 GL-HSPC 3350 GL-HSPC 3550 GL-HSPC 3750 GL-HSPC 4000

2500 2650 2800 3000 3150 3350 3550 3750 4000

Mfg. range Weight/metre (Kgs) 2267-22943mm 1.111

20 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 224mm (dp) Page no.31 HSPC 22 20 40 ‘e’ = 25.5 mm, Length designation: ‘Lp’ 22 mm

Belt Reference

GL-HSPC 4250 GL-HSPC 4500 GL-HSPC 4750 GL-HSPC 5000 GL-HSPC 5300 GL-HSPC 5600 GL-HSPC 6000 GL-HSPC 6300 GL-HSPC 6700

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

Lp (mm)

Belt Reference

Lp (mm)

4250 4500 4750 5000 5300 5600 6000 6300 6700

GL-HSPC 7100 GL-HSPC 7500 GL-HSPC 8000 GL-HSPC 8500 GL-HSPC 9500 GL-HSPC 10000 GL-HSPC 11200

7100 7500 8000 8500 9500 10000 11200

PIX- GALLANT ®-HXS Heavy Duty High Power Belts Section: GALLANT-H5V Standard: PIX Standard

GALLANT-H5V

La (mm)

Belt Reference

GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V

670 15J 710 15J 750 15J 800 15J 850 15J 900 15J 950 15J 1000 15J 1060 15J 1120 15J 1180 15J

PIX- GALLANT

1702 1803 1905 2032 2159 2286 2413 2540 2692 2845 2997

-HXS Section: GALLANT-H8V Standard: PIX Standard

Mfg. range Weight/metre (Kgs) 51 to 663 inch 0.620

16 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140mm (de) Page no.31 H5V 15.8 16 40 ‘e’ = 17.5 mm, Length designation: ‘La’ 15.8 mm

La (mm)

Belt Reference

GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V

1250 15J 1320 15J 1400 15J 1500 15J 1600 15J 1700 15J 1800 15J 1900 15J 2000 15J 2120 15J 2240 15J

3175 3353 3556 3810 4064 4318 4572 4826 5080 5385 5690

La (mm)

Belt Reference

GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V GL-H5V

5994 6350 6731 7112 7620 8001 8509 9017

2360 15J 2500 15J 2650 15J 2800 15J 3000 15J 3150 15J 3350 15J 3550 15J

Heavy Duty High Power Belts

GALLANT-H8V

Mfg. range Weight/metre (Kgs) 100” to 905” 1.581

25 mm

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 335mm (de) Page no.31 H8V 25.4 25 40 ‘e’ = 28.6 mm, Length designation: ‘La’ 25.4 mm

Belt Reference

La (mm)

Belt Reference

La (mm)

Belt Reference

La (mm)

GL-H8V 1000 25J GL-H8V 1060 25J GL-H8V 1120 25J GL-H8V 1180 25J GL-H8V 1250 25J GL-H8V 1320 25J GL-H8V 1400 25J GL-H8V 1500 25J GL-H8V 1600 25J GL-H8V 1700 25J

2540 2692 2845 2997 3175 3353 3556 3810 4064 4318

GL-H8V 1800 25J GL-H8V 1900 25J GL-H8V 2000 25J GL-H8V 2120 25J GL-H8V 2240 25J GL-H8V 2360 25J GL-H8V 2500 25J GL-H8V 2650 25J GL-H8V 2800 25J GL-H8V 3000 25J

4572 4826 5080 5385 5690 5994 6350 6731 7112 7620

GL-H8V 3150 25J GL-H8V 3350 25J GL-H8V 3550 25J GL-H8V 3750 25J GL-H8V 4000 25J GL-H8V 4250 25J GL-H8V 4500 25J GL-H8V 4750 25J GL-H8V 5000 25J

8001 8509 9017 9525 10160 10795 11430 12065 12700

• Non standard stock items are available upon request • Standard designation for Banded Belts: Refer page no. 30

PIX- Xâ&#x20AC;&#x2122;set -VS ÂŽ

Variable Speed Belts

E 335E E 335E E 335a Features & Benefits ? Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where belt stress is more ? Firm gripping action in the contact areas provide positive traction for precise, immediate response ? Higher power transmission than regular Belts ? Longer service-life ? Facilitates smooth running without excessive vibrations ? Specific belt-design for maximum longitudinal flexibility

Product range: 17x8, 25x13 / HI, 32x15 / HJ, 38x18 / HK, 45x20 / HL, 51x20 / HM, 55x22, 60x25, 13x11, 15x9, 19x11, 21x9, 22x16, 30x12, 33x22, 38x23, 40x20, 68x24 Application: For use on variable speed pulley drives requiring exact speed control and maximum range of speed changes. Ideal for recreational equipment, agricultural applications and machine tools

PIX- X’set -VS Wrapped Variable Speed Belts Standard: ISO 3410:1989 / BS 3733:1974 ®

Features: • Excellent transverse rigidity and flexibility to prevent bucking minimum diameter settings where belt stresses are more • Firm gripping action in the contact areas provide positive traction for precise, immediate response • Higher power transmission than regular range • Longer service life • Facilitates smooth running without excessive vibration • Specific Belt-design for maximum longitudinal flexibility • Temperature range: -18° to +80°C Belt Reference

Inside Length (mm)

VS 17x8 VS 17x8 VS 17x8 VS 17x8 VS 17x8 VS 17x8 VS 17x8 VS 17x8 VS 17x8

800 864 864 864 1065 1065 1065 1168 1262

VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13 VS 25x13

1080 1155 1168 1229 1320 1336 1340 1380 1425 1535 1600 1700 1844 2048 3015 4000 5000 8992

VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15 VS 32x15

1171 1234 1323 1374 1527 2545 3018 4000 5500 6000 7000 8240

Dimensions Topwidth (x) Thickness (y) Angle (mm) (mm) 17 8 40° 25 13 30° 32 15 34° 38 18 30° 45 20 30° 51 20 34° 55 22 30° 60 25 30°

Manufacturing range (Li) 800 - 1262 1080 - 8992 1171 - 8240 1500 - 9170 1608 - 8847 1891 - 9588 1921 - 6671 1956 - 6681

Belt Reference

Inside Length (mm)

Belt Reference

Inside Length (mm)

VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18 VS 38x18

1500 1565 1640 1740 1845 1970 2280 2300 2440 2840 3198 9170

VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22 VS 55x22

1921 2000 2300 2500 2600 2700 2800 3500 4000 4500 5000 6671

VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20 VS 45x20

1608 1970 2280 2300 2440 2840 3375 4000 4500 5000 5500 6000 7500 7000 7500 8000 8500 8847

VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25 VS 60x25

1956 2000 2200 2500 2800 3000 3500 3800 3950 4000 4500 4750 6000 6681

VS 51x20 VS 51x20 VS 51x20 VS 51x20 VS 51x20 VS 51x20 VS 51x20 VS 51x20 VS 51x20

1891 3000 3500 4000 4500 6000 7000 7500 9588

VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24 VS 68x24

2540 2600 2700 2800 2900 3000 3500 4000 4250 5000 6000 7000 9042

• Non standard stock items are available upon request

PIX- X’tra

Raw Edge Cogged Belts

_ to

AX 25/ X1 3x635 U &&& ■to

* I i

I i

J I

7J 7)

Features: • Oil resistant & antistatic • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec) • Higher power transmission capacity than Wrapped Belts • Superior transverse stiffness & high wear resistance • Suitable for drives with small pulley diameters, high ambient temperature & speed • Temperature range: -25°C to +100°C • ATEX certified FRAS Belts are also available Application: General engineering, all industrial Belts drive

PIX- X’tra Raw Edge Cogged Belts ®

Classical Section: ZX Standard: BS 3790, ISO 4184, IS 2494

ZX / 10x6 10 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 16 38 22

6 mm

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.141

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 40 dp (mm) ZX 10 6 36 42 • Nominal Length (Inches) : Inside length • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

ZX 24 ZX 25 ZX 25.5 ZX 26 ZX 27 ZX 28 ZX 29 ZX 29.5 ZX 30 ZX 30.5 ZX 31 ZX 31.5

610 635 650 660 686 710 735 750 760 775 790 800

632 657 672 682 708 732 757 772 782 797 812 822

ZX 32 ZX 33 ZX 33.5 ZX 34 ZX 35 ZX 35.5 ZX 36 ZX 36.5 ZX 37 ZX 38 ZX 40 ZX 40.5

815 840 850 865 890 900 914 925 940 965 1016 1030

837 862 872 887 912 922 936 947 962 987 1038 1052

• Non standard stock items are available upon request

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

ZX 41 ZX 42 ZX 43 ZX 44 ZX 45 ZX 46 ZX 47 ZX 49 ZX 52 ZX 55 ZX 58

1041 1065 1090 1120 1143 1168 1190 1250 1320 1400 1475

1063 1087 1112 1142 1165 1190 1212 1272 1342 1422 1497

PIX- X’tra Raw Edge Cogged Belts ®

Classical Section: AX Standard: BS 3790, ISO 4184, IS 2494

AX / 13x8 13 mm 8 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 14 50 36

Mfg. range Weight/metre (Kgs) 23” to 200” 0.271

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 63 dp (mm) AX 13 8 36 32 • Nominal Length (Inches) : Inside length • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

AX 23 AX 23.5 AX 24 AX 24.5 AX 25 AX 25.5 AX 26 AX 26.5 AX 27 AX 27.5 AX 28 AX 28.5 AX 29 AX 29.5 AX 30 AX 30.5 AX 31 AX 31.5 AX 32 AX 32.5 AX 33 AX 33.5 AX 34 AX 34.5 AX 35 AX 35.5 AX 36 AX 36.5 AX 37 AX 37.5 AX 38 AX 38.5 AX 39 AX 39.5 AX 40 AX 40.5

585 600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 925 940 950 965 975 990 1000 1016 1030

620 633 646 658 671 684 696 709 722 735 747 760 773 785 798 811 823 836 849 862 874 887 900 912 925 938 950 963 976 989 1001 1014 1027 1039 1052 1065

AX 41 AX 41.5 AX 42 AX 42.5 AX 43 AX 43.5 AX 44 AX 44.5 AX 45 AX 45.5 AX 46 AX 46.5 AX 47 AX 47.5 AX 48 AX 48.5 AX 49 AX 49.5 AX 50 AX 50.5 AX 51 AX 51.5 AX 52 AX 52.5 AX 53 AX 53.5 AX 54 AX 55 AX 56 AX 57 AX 58 AX 59 AX 60 AX 61 AX 62 AX 63

1041 1050 1065 1080 1090 1105 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1335 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600

1077 1090 1103 1116 1128 1141 1154 1166 1179 1192 1204 1217 1230 1243 1255 1268 1281 1293 1306 1319 1331 1344 1357 1370 1382 1395 1408 1433 1458 1484 1509 1535 1560 1585 1611 1636

AX 64 AX 65 AX 66 AX 67 AX 68 AX 69 AX 70 AX 71 AX 72 AX 73 AX 74 AX 75 AX 76 AX 77 AX 78 AX 79 AX 80 AX 81 AX 82 AX 83 AX 84 AX 84.5 AX 85 AX 86 AX 86.5 AX 88 AX 89 AX 90 AX 93 AX 95 AX 98 AX 104 AX 110 AX 118 AX 124 AX 132

1625 1650 1676 1700 1725 1750 1775 1800 1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2100 2134 2150 2160 2184 2200 2240 2260 2286 2360 2413 2500 2650 2800 3000 3150 3350

1662 1687 1712 1738 1763 1789 1814 1839 1865 1890 1916 1941 1966 1992 2017 2043 2068 2093 2119 2144 2170 2182 2195 2220 2233 2271 2297 2322 2398 2449 2525 2678 2830 3033 3186 3389

• Non standard stock items are available upon request

PIX- X’tra Raw Edge Cogged Belts ®

Classical Section: BX Standard: BS 3790, ISO 4184, IS 2494

BX / 17x11 17 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 26 69 43

11 mm

Features: I • Oil resistant & antistatic • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec) • Higher power transmission capacity than Wrapped Belts • Superior transverse stiffness & high wear resistance • Suitable for drives with small pulley diameters, high ambient temperature & speed • Temperature range: -25°C to +100°C

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.492

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 90 dp (mm) BX 17 11 36 25 • Nominal Length (Inches) : Inside length • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

BX 23.5 BX 24 BX 24.5 BX 25 BX 25.5 BX 26 BX 26.5 BX 27 BX 27.5 BX 28 BX 28.5 BX 29 BX 29.5 BX 30 BX 30.5 BX 31 BX 31.5 BX 32 BX 32.5 BX 33 BX 33.5 BX 34 BX 34.5 BX 35 BX 35.5 BX 36 BX 37 BX 37.5 BX 38 BX 38.5 BX 39 BX 39.5 BX 40 BX 40.5 BX 41 BX 41.5 BX 42 BX 42.5

600 610 620 635 650 660 675 686 700 710 725 735 750 760 775 790 800 815 825 840 850 865 875 890 900 914 940 950 965 975 990 1000 1016 1030 1041 1050 1065 1080

640 653 663 678 693 703 718 729 743 754 768 780 793 805 818 830 843 856 868 881 893 907 918 932 945 957 983 996 1008 1021 1034 1043 1059 1072 1084 1093 1110 1123

BX 43 BX 44 BX 44.5 BX 45 BX 45.5 BX 46 BX 46.5 BX 47 BX 47.5 BX 48 BX 48.5 BX 49 BX 49.5 BX 50 BX 50.5 BX 51 BX 51.5 BX 52 BX 53 BX 53.5 BX 54 BX 55 BX 56 BX 57 BX 58 BX 59 BX 60 BX 61 BX 62 BX 63 BX 64 BX 65 BX 66 BX 67 BX 68 BX 69 BX 70 BX 71

1090 1120 1130 1143 1155 1168 1180 1190 1200 1220 1230 1250 1260 1270 1285 1300 1310 1320 1350 1360 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800

1135 1161 1173 1186 1198 1211 1224 1237 1243 1262 1273 1288 1303 1313 1328 1338 1353 1364 1389 1402 1415 1440 1465 1491 1516 1542 1567 1592 1618 1643 1669 1694 1719 1745 1770 1796 1821 1846

• Non standard stock items are available upon request

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

BX 72 BX 73 BX 74 BX 75 BX 76 BX 77 BX 78 BX 79 BX 80 BX 81 BX 82 BX 83 BX 83.5 BX 84 BX 85 BX 86 BX 86.5 BX 87 BX 88 BX 89 BX 90 BX 93 BX 95 BX 97 BX 98 BX 100 BX 102 BX 103 BX 104 BX 107 BX 108 BX 110 BX 118 BX 124 BX 132 BX 144

1830 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2100 2120 2134 2160 2184 2200 2210 2240 2260 2286 2360 2413 2464 2500 2540 2591 2615 2650 2725 2750 2800 3000 3150 3350 3658

1872 1897 1923 1948 1973 1999 2024 2050 2075 2100 2126 2151 2163 2177 2202 2227 2243 2253 2278 2304 2329 2405 2456 2507 2532 2583 2634 2659 2685 2761 2786 2837 3040 3193 3396 3701

PIX- X’tra Raw Edge Cogged Belts ®

Classical Section: CX Standard: BS 3790, ISO 4184, IS 2494

CX / 22x14 Belt length factor (mm) Lp to La Li to Lp Li to La 88 32 56

14 mm

Features: 22 mm • Oil resistant & antistatic £ • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec) • Higher power transmission capacity than Wrapped Belts • Superior transverse stiffness & high wear resistance • Suitable for drives with small pulley diameters, high ambient temperature & speed • Temperature range: -25°C to +100°C • ATEX certified FRAS Belts are also available

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.761

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 140 dp (mm) CX 22 14 36 25 • Nominal Length (Inches): Inside length • ‘PIX FRAS’ Belts conforms to: © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

CX 39 CX 43 CX 49 CX 52 CX 55 CX 59 CX 62 CX 67

990 1090 1250 1320 1400 1500 1575 1700

1047 1148 1301 1377 1453 1555 1631 1758

CX 68 CX 71 CX 75 CX 79 CX 81 CX 85 CX 88 CX 90

1725 1800 1900 2000 2060 2160 2240 2286

1783 1859 1961 2063 2113 2215 2291 2342

• Non standard stock items are available upon request

Belt Reference

Inside Length (mm)

Datum/Pitch Length (mm)

CX 93 CX 96 CX 98 CX 107 CX 110 CX 118 CX 132

2360 2438 2500 2725 2800 3000 3350

2418 2494 2545 2774 2850 3053 3409

PIX- X’tra Raw Edge Cogged Belts ®

Wedge Section: XPZ Standard: BS 3790, ISO 4184

XPZ / 10x8 10 mm

•I

Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

8 mm

Mfg. range Weight/metre (Kgs) 600 to 5100 mm 0.198

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 56 dp (mm) XPZ 10 8 36 55 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPZ 600 XPZ 602 XPZ 612 XPZ 620 XPZ 630 XPZ 637 XPZ 655 XPZ 662 XPZ 670 XPZ 687 XPZ 700 XPZ 710 XPZ 722 XPZ 730 XPZ 737 XPZ 750 XPZ 760 XPZ 762 XPZ 772 XPZ 780 XPZ 787 XPZ 800 XPZ 812 XPZ 825 XPZ 837 XPZ 850 XPZ 860 XPZ 862 XPZ 875 XPZ 887 XPZ 892 XPZ 900 XPZ 912 XPZ 925 XPZ 937 XPZ 950 XPZ 962 XPZ 975 XPZ 987 XPZ 1000 XPZ 1010 XPZ 1012 XPZ 1024 XPZ 1030 XPZ 1034 XPZ 1037

600 602 612 620 630 637 655 662 670 687 700 710 722 730 737 750 760 762 772 780 787 800 812 825 837 850 860 862 875 887 892 900 912 925 937 950 962 975 987 1000 1010 1012 1024 1030 1034 1037

XPZ 1047 XPZ 1060 XPZ 1077 XPZ 1080 XPZ 1087 XPZ 1110 XPZ 1112 XPZ 1120 XPZ 1137 XPZ 1140 XPZ 1150 XPZ 1162 XPZ 1180 XPZ 1187 XPZ 1200 XPZ 1202 XPZ 1212 XPZ 1217 XPZ 1220 XPZ 1225 XPZ 1237 XPZ 1250 XPZ 1262 XPZ 1270 XPZ 1280 XPZ 1287 XPZ 1300 XPZ 1312 XPZ 1320 XPZ 1337 XPZ 1340 XPZ 1347 XPZ 1362 XPZ 1387 XPZ 1400 XPZ 1412 XPZ 1420 XPZ 1437 XPZ 1450 XPZ 1462 XPZ 1487 XPZ 1500 XPZ 1512 XPZ 1520 XPZ 1537 XPZ 1548

1047 1060 1077 1080 1087 1110 1112 1120 1137 1140 1150 1162 1180 1187 1200 1202 1212 1217 1220 1225 1237 1250 1262 1270 1280 1287 1300 1312 1320 1337 1340 1347 1362 1387 1400 1412 1420 1437 1450 1462 1487 1500 1512 1520 1537 1548

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

XPZ 1550 XPZ 1557 XPZ 1562 XPZ 1587 XPZ 1600 XPZ 1612 XPZ 1637 XPZ 1650 XPZ 1662 XPZ 1687 XPZ 1700 XPZ 1737 XPZ 1750 XPZ 1760 XPZ 1762 XPZ 1787 XPZ 1800 XPZ 1850 XPZ 1900 XPZ 1937 XPZ 1950 XPZ 1987 XPZ 2000 XPZ 2030 XPZ 2037 XPZ 2060 XPZ 2120 XPZ 2150 XPZ 2160 XPZ 2240 XPZ 2280 XPZ 2360 XPZ 2410 XPZ 2500 XPZ 2540 XPZ 2650 XPZ 2690 XPZ 2715 XPZ 2800 XPZ 2840 XPZ 3000 XPZ 3150 XPZ 3350 XPZ 3550

1550 1557 1562 1587 1600 1612 1637 1650 1662 1687 1700 1737 1750 1760 1762 1787 1800 1850 1900 1937 1950 1987 2000 2030 2037 2060 2120 2150 2160 2240 2280 2360 2410 2500 2540 2650 2690 2715 2800 2840 3000 3150 3350 3550

PIX- X’tra Raw Edge Cogged Belts ®

Wedge Section: XPA Standard: BS 3790, ISO 4184

XPA / 13x10 13 mm 10 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 63 18 45

Mfg. range Weight/metre (Kgs) 600 to 5100 mm 0.399

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 71 dp (mm) XPA 13 10 36 42 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPA 630 XPA 682 XPA 690 XPA 707 XPA 710 XPA 732 XPA 750 XPA 757 XPA 775 XPA 782 XPA 800 XPA 807 XPA 825 XPA 832 XPA 850 XPA 857 XPA 875 XPA 882 XPA 900 XPA 907 XPA 925 XPA 932 XPA 950 XPA 957 XPA 975 XPA 982 XPA 1000 XPA 1007 XPA 1012 XPA 1022 XPA 1030 XPA 1032 XPA 1060 XPA 1080 XPA 1082 XPA 1090 XPA 1107 XPA 1120 XPA 1132 XPA 1142 XPA 1150 XPA 1157

630 682 690 707 710 732 750 757 775 782 800 807 825 832 850 857 875 882 900 907 925 932 950 957 975 982 1000 1007 1012 1022 1030 1032 1060 1080 1082 1090 1107 1120 1132 1142 1150 1157

XPA 1172 XPA 1180 XPA 1207 XPA 1220 XPA 1232 XPA 1250 XPA 1257 XPA 1272 XPA 1282 XPA 1300 XPA 1307 XPA 1320 XPA 1332 XPA 1340 XPA 1357 XPA 1360 XPA 1382 XPA 1400 XPA 1432 XPA 1450 XPA 1457 XPA 1460 XPA 1482 XPA 1490 XPA 1500 XPA 1507 XPA 1532 XPA 1550 XPA 1557 XPA 1582 XPA 1600 XPA 1607 XPA 1630 XPA 1632 XPA 1650 XPA 1657 XPA 1682 XPA 1700 XPA 1732 XPA 1750 XPA 1757 XPA 1782

1172 1180 1207 1220 1232 1250 1257 1272 1282 1300 1307 1320 1332 1340 1357 1360 1382 1400 1432 1450 1457 1460 1482 1490 1500 1507 1532 1550 1557 1582 1600 1607 1630 1632 1650 1657 1682 1700 1732 1750 1757 1782

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

XPA 1800 XPA 1832 XPA 1850 XPA 1857 XPA 1882 XPA 1900 XPA 1932 XPA 1950 XPA 1957 XPA 1982 XPA 2000 XPA 2057 XPA 2057 XPA 2060 XPA 2082 XPA 2120 XPA 2150 XPA 2160 XPA 2180 XPA 2182 XPA 2240 XPA 2282 XPA 2300 XPA 2360 XPA 2432 XPA 2482 XPA 2500 XPA 2532 XPA 2582 XPA 2650 XPA 2682 XPA 2732 XPA 2800 XPA 2882 XPA 3000 XPA 3150 XPA 3282 XPA 3350 XPA 3550 XPA 3750 XPA 4000

1800 1832 1850 1857 1882 1900 1932 1950 1957 1982 2000 2032 2057 2060 2082 2120 2150 2160 2180 2182 2240 2282 2300 2360 2432 2482 2500 2532 2582 2650 2682 2732 2800 2882 3000 3150 3282 3350 3550 3750 4000

PIX- X’tra Raw Edge Cogged Belts ®

Wedge Section: XPB Standard: BS 3790, ISO 4184

XPB / 17x14 17 mm Belt length factor (mm) Lp to La Li to Lp Li to La 28 88 60

14 mm

Mfg. range Weight/metre (Kgs) 600 to 5100 mm 0.560

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 112 dp (mm) XPB 17 14 36 33 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPB 1000 XPB 1060 XPB 1120 XPB 1180 XPB 1200 XPB 1250 XPB 1260 XPB 1320 XPB 1340 XPB 1360 XPB 1400 XPB 1410 XPB 1450 XPB 1480 XPB 1500 XPB 1510 XPB 1550 XPB 1590 XPB 1600 XPB 1620 XPB 1650 XPB 1690

1000 1060 1120 1180 1200 1250 1260 1320 1340 1360 1400 1410 1450 1480 1500 1510 1550 1590 1600 1620 1650 1690

XPB 1700 XPB 1725 XPB 1750 XPB 1800 XPB 1850 XPB 1900 XPB 1950 XPB 2000 XPB 2020 XPB 2060 XPB 2120 XPB 2150 XPB 2180 XPB 2240 XPB 2280 XPB 2300 XPB 2325 XPB 2360 XPB 2400 XPB 2410 XPB 2500 XPB 2530

1700 1725 1750 1800 1850 1900 1950 2000 2020 2060 2120 2150 2180 2240 2280 2300 2325 2360 2400 2410 2500 2530

Belt Reference

Datum/Pitch Length (mm)

XPB 2580 XPB 2650 XPB 2680 XPB 2700 XPB 2800 XPB 2840 XPB 2900 XPB 2990 XPB 3000 XPB 3150 XPB 3170 XPB 3250 XPB 3340 XPB 3350 XPB 3550 XPB 3750 XPB 4000 XPB 4250 XPB 4500 XPB 4750

2580 2650 2680 2700 2800 2840 2900 2990 3000 3150 3170 3250 3340 3350 3550 3750 4000 4250 4500 4750

PIX- X’tra Raw Edge Cogged Belts ®

Wedge Section: XPC Standard: BS 3790, ISO 4184

XPC / 22x18 22 mm

!_ 18 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 113 30 83

Mfg. range Weight/metre (Kgs) 600 to 5100 mm 0.925

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness pulley dia. (No. of V-Belts) (Deg) 180 dp (mm) XPC 22 18 38 25 • Nominal Length: Pitch length Lp in mm • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPC 1600 XPC 1900 XPC 2000 XPC 2120 XPC 2240 XPC 2360

1600 1900 2000 2120 2240 2360

XPC 2500 XPC 2650 XPC 2800 XPC 3000 XPC 3150 XPC 3350

2500 2650 2800 3000 3150 3350

XPC 3500 XPC 3550 XPC 3600 XPC 3750 XPC 4250 XPC 5000

3500 3550 3600 3750 4250 5000

• Non standard stock items are available upon request

PIX- X’tra Raw Edge Cogged Belts ®

Narrow Section: 3VX Standard: RMA IP 22

3VX / 9.7x8 9.7 mm

« r

8 mm

Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.188

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 56 de (mm) 3VX 9.7 8 38 42 • Nominal Length : Belt no /10 = outside length in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

3VX 250 3VX 265 3VX 280 3VX 300 3VX 315 3VX 335 3VX 355 3VX 375 3VX 400 3VX 425 3VX 450

635 673 711 762 800 851 902 953 1016 1080 1143

3VX 475 3VX 500 3VX 530 3VX 560 3VX 600 3VX 630 3VX 670 3VX 710 3VX 750 3VX 800 3VX 850

1207 1270 1346 1422 1524 1600 1702 1803 1905 2032 2159

Belt Reference

Outside Length (mm)

3VX 900 3VX 950 3VX 1000 3VX 1060 3VX 1120 3VX 1180 3VX 1250 3VX 1320 3VX 1400

2286 2413 2540 2692 2845 2997 3175 3353 3556

PIX- X’tra Raw Edge Cogged Belts ®

Narrow Section: 5VX Standard: RMA IP 22

14 mm

5VX / 15.8x14

Features: 15.8 mm l•l • Oil resistant & antistatic • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec) • Higher power transmission capacity than Wrapped Belts • Superior transverse stiffness & high wear resistance • Suitable for drives with small pulley diameters, high ambient temperature & speed • Temperature range: -25°C to +100°C • ATEX certified FRAS Belts are also available

Belt length factor (mm) Lp to La Li to Lp Li to La 85 25 60

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.502

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 112 de (mm) 5VX 15.8 14 38 25 • Nominal Length : Belt no /10 = outside length in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

5VX 500 5VX 530 5VX 560 5VX 600 5VX 630 5VX 670 5VX 710

1270 1346 1422 1524 1600 1702 1803

5VX 750 5VX 800 5VX 850 5VX 900 5VX 950 5VX 1000 5VX 1060

1905 2032 2159 2286 2413 2540 2692

• Non standard stock items are available upon request

Belt Reference

Outside Length (mm)

5VX 1120 5VX 1180 5VX 1250 5VX 1320 5VX 1400

2845 2997 3175 3353 3556

DuraBand®-XR Raw Edge Cogged Banded Belts

n&ffi

£!2sLfe“-!>

3H5VX 1120 La ;jS$Sj£ 3H5VX 1]?S u

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Application: Best suited for drives with severe vibrations, vertical shaft drives, V-flat drives, agricultural drives, stone crushers, heavy duty compressors, generator sets, pumps, cold forging machines & mining equipment.

PIX- DuraBand -XR Banded Belts ®

Section: HAX Standard: ISO 5291, BS 3790

HAX / 13x10

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.161

10 mm

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HAX 13 10 36 ‘e’ = 15.9 mm, Length designation: ‘Li’ (inches) 13 mm

Belt Reference

Li (mm)

La (mm)

La (inch)

Belt Reference

Li (mm)

La (mm)

La (inch)

Belt Reference

Li (mm)

La (mm)

La (inch)

HAX 33 HAX 51 HAX 56 HAX 57 HAX 67 HAX 79 HAX 98 HAX 100 HAX 104 HAX 112 HAX 120 HAX 128 HAX 144

838 1295 1422 1448 1702 2007 2489 2540 2642 2845 3048 3251 3658

888 1345 1472 1498 1752 2057 2539 2590 2692 2895 3098 3301 3708

35 53 58 59 69 81 100 102 106 114 122 130 146

HAX 167 HAX 187 HAX 190 HAX 194 HAX 198 HAX 200 HAX 204 HAX 206 HAX 208 HAX 210 HAX 216 HAX 218 HAX 220

4242 4750 4826 4928 5029 5080 5182 5232 5283 5334 5486 5537 5588

4292 4800 4876 4978 5079 5130 5232 5282 5333 5384 5536 5587 5638

169 189 192 196 200 202 206 208 210 212 218 220 222

HAX 224 HAX 228 HAX 230 HAX 234 HAX 236 HAX 240 HAX 244 HAX 250 HAX 252 HAX 255

5690 5791 5842 5944 5994 6096 6198 6350 6401 6477

5740 5841 5892 5994 6044 6146 6248 6400 6451 6527

226 230 232 236 238 242 246 252 254 257

PIX- DuraBand -XR Banded Belts ®

Section: HBX Standard: ISO 5291, BS 3790

HBX / 17x13

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. range Weight/metre (Kgs) 23.5” to 200” 0.250

13 mm

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HBX 17 13 36 ‘e’ = 19 mm, Length designation: ‘Li’ (inches) 17 mm

e Belt Reference

Li (mm)

La (mm)

La (inch)

Belt Reference

Li (mm)

La (mm)

La (inch)

Belt Reference

Li (mm)

La (mm)

La (inch)

HBX 43 HBX 63 HBX 72 HBX 74 HBX 76 HBX 78 HBX 79 HBX 80 HBX 83 HBX 84 HBX 86 HBX 87 HBX 89

1092 1600 1829 1880 1930 1981 2007 2032 2108 2134 2184 2210 2261

1161 1669 1898 1949 1999 2050 2076 2101 2177 2203 2253 2279 2330

46 66 75 77 79 81 82 83 86 87 89 90 92

HBX 90 HBX 92 HBX 93 HBX 94 HBX 95 HBX 96 HBX 97 HBX 98 HBX 105 HBX 112 HBX 116 HBX 117 HBX 120

2286 2337 2362 2388 2413 2438 2464 2489 2667 2845 2946 2972 3048

2355 2406 2431 2457 2482 2507 2533 2558 2736 2914 3015 3041 3117

93 95 96 97 98 99 100 101 108 115 119 120 123

HBX 124 HBX 126 HBX 128 HBX 136 HBX 140 HBX 144 HBX 148 HBX 162 HBX 195 HBX 370

3150 3200 3251 3454 3556 3658 3759 4115 4953 9398

3219 3269 3320 3523 3625 3727 3828 4184 5022 9467

127 129 131 139 143 147 151 165 198 373

• Non standard stock items are available upon request • Standard designation for Raw Edge Banded Belts: Refer page no. 51

-Xld

DuraBand®-XR Section: HXPZ Standard: BS 3790

Banded Belts

HXPZ / 10x10

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

600 700 800 910 1000 1050 1100 1150

HXPZ 600 HXPZ 700 HXPZ 800 HXPZ 910 HXPZ 1000 HXPZ 1050 HXPZ 1100 HXPZ 1150

Lp (mm)

Belt Reference

HXPZ 1200 HXPZ 1205 HXPZ 1400 HXPZ 2000 HXPZ 2120 HXPZ 2240 HXPZ 2360 HXPZ 2500

Lp (mm)

1200 1205 1400 2000 2120 2240 2360 2500

Mfg. range Weight/metre (Kgs) 600 to 5080mm 0.134

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HXPZ 10 10 36 ‘e’ = 12.0 mm, Length designation: ‘Lp’ 10 mm

Lp (mm)

Belt Reference

HXPZ 2650 HXPZ 2800 HXPZ 3000 HXPZ 3150 HXPZ 3350 HXPZ 3550

2650 2800 3000 3150 3350 3550

Banded Belts

HXPA / 13x12

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. range Weight/metre (Kgs) 600 to 5080mm 0.186

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HXPA 13 12 36 ‘e’ = 15.0 mm, Length designation: ‘Lp’ 13 mm

i ■i

600 700 800 959 1000 1007 1200 1415 1500 1600

HXPA 600 HXPA 700 HXPA 800 HXPA 959 HXPA 1000 HXPA 1007 HXPA 1200 HXPA 1415 HXPA 1500 HXPA 1600

Lp (mm)

Belt Reference

HXPA 1715 HXPA 2000 HXPA 2032 HXPA 2120 HXPA 2240 HXPA 2360 HXPA 2500 HXPA 2650 HXPA 2800 HXPA 3000

Lp (mm)

1715 2000 2032 2120 2240 2360 2500 2650 2800 3000

12 mm

-Xld

DuraBand -XR Section: HXPA Standard: BS 3790

10 mm

r V

Lp (mm)

Belt Reference

HXPA 3150 HXPA 3350 HXPA 3550 HXPA 3750 HXPA 4000 HXPA 4250 HXPA 4500

3150 3350 3550 3750 4000 4250 4500

• Non standard stock items are available upon request • Standard designation for Raw Edge Banded Belts: Refer page no. 51

-XR

Banded Belts

Section: HXPB Standard: BS 3790

HXPB / 17x16 Mfg. range Weight/metre (Kgs) 600 to 5080mm 0.250

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HXPB 17 16 36 ‘e’ = 19 mm, Length designation: ‘Lp’

17 mm r

is•i je

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HXPB 600 HXPB 700 HXPB 750 HXPB 800 HXPB 900 HXPB 1000 HXPB 1200 HXPB 1550 HXPB 1700 HXPB 1762 HXPB 1800 HXPB 1830 HXPB 1900 HXPB 2000

600 700 750 800 900 1000 1200 1550 1700 1762 1800 1830 1900 2000

HXPB 2050 HXPB 2080 HXPB 2100 HXPB 2120 HXPB 2240 HXPB 2300 HXPB 2310 HXPB 2360 HXPB 2650 HXPB 2800 HXPB 2900 HXPB 3000 HXPB 3150 HXPB 3250

2050 2080 2100 2120 2240 2300 2310 2360 2650 2800 2900 3000 3150 3250

HXPB 3350 HXPB 3400 HXPB 3550 HXPB 3670 HXPB 3800 HXPB 3900 HXPB 4000 HXPB 4200 HXPB 4250 HXPB 4400 HXPB 4500 HXPB 4820 HXPB 5000

3350 3400 3550 3670 3800 3900 4000 4200 4250 4400 4500 4820 5000

-XR

Banded Belts

Section: HXPC Standard: BS 3790

HXPC / 22x20

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. Range Weight/metre (Kgs) 600 to 5080mm 0.449

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 HXPC 22 20 36 ‘e’ = 25.5 mm, Length designation: ‘Lp’

22 mm

20 mm

PIX- DuraBand

16 mm

PIX- DuraBand

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

HXPC 600 HXPC 700 HXPC 800 HXPC 959 HXPC 1000 HXPC 1200 HXPC 1500 HXPC 1600 HXPC 2000 HXPC 2120

600 700 800 959 1000 1200 1500 1600 2000 2120

HXPC 2240 HXPC 2360 HXPC 2500 HXPC 2650 HXPC 2800 HXPC 3000 HXPC 3150 HXPC 3350 HXPC 3550 HXPC 3750

2240 2360 2500 2650 2800 3000 3150 3350 3550 3750

HXPC 4000 HXPC 4250 HXPC 4500 HXPC 4515 HXPC 4700 HXPC 4800 HXPC 5080

4000 4250 4500 4515 4700 4800 5080

• Non standard stock items are available upon request • Standard designation for Raw Edge Banded Belts: Refer page no. 51

Banded Belts

H3VX / 9.7 x 10

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. Range Weight/metre (Kgs) 23.5” to 200” 0.107

MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 H3VX 9.7 10 36 ‘e’ = 10.3 mm, Length designation: ‘La’ 9.7 mm

t T

10 mm

PIX- DuraBand®-XR Section: H3VX Standard: ISO 5290

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

H3VX 250 H3VX 265 H3VX 280 H3VX 300 H3VX 315 H3VX 335 H3VX 355 H3VX 375 H3VX 400 H3VX 425 H3VX 450

635 673 711 762 800 851 902 953 1016 1080 1143

H3VX 475 H3VX 500 H3VX 530 H3VX 560 H3VX 600 H3VX 630 H3VX 670 H3VX 710 H3VX 750 H3VX 800 H3VX 850

1207 1270 1346 1422 1524 1600 1702 1803 1905 2032 2159

H3VX 900 H3VX 950 H3VX 1000 H3VX 1060 H3VX 1120 H3VX 1180 H3VX 1250 H3VX 1320 H3VX 1400

2286 2413 2540 2692 2845 2997 3175 3353 3556

PIX- DuraBand -XR Banded Belts ®

Section: H5VX Standard: ISO 5290

H5VX / 15.8 x 16

Features: • Enhanced power transmission capacity up to 25% • Lesser number of Belts required as compared to multiple single-Belt drive • High adhesion strength between tie band and the Belts • Eliminates chance of a mismatch in the length as observed in multiple single-Belt drive • Antistatic, oil and heat resistant • ATEX certified FRAS Belts are also available • Temperature range: -25°C to +100°C • Manufactured through a single-stage-curing process

Mfg. Range Weight/metre (Kgs) 23.5” to 200” 0.227

t T

ai T

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

Belt Reference

Lp (mm)

H5VX 500 H5VX 530 H5VX 560 H5VX 600 H5VX 630 H5VX 670 H5VX 710 H5VX 750 H5VX 800

1270 1346 1422 1524 1600 1702 1803 1905 2032

H5VX 850 H5VX 900 H5VX 950 H5VX 1000 H5VX 1060 H5VX 1120 H5VX 1180 H5VX 1250 H5VX 1320

2159 2286 2413 2540 2692 2845 2997 3175 3353

H5VX 1400 H5VX 1500 H5VX 1600 H5VX 1700 H5VX 1800 H5VX 1900 H5VX 2000

3556 3810 4064 4318 4572 4826 5080

• Non standard stock items are available upon request • Standard designation for Raw Edge Banded Belts: Refer page no. 51

16 mm

MOQ Angle Dimensions (mm) Section Top width Thickness (Degree) (No. of V-Belts) Page no. 51 H5VX 15.8 16.0 36 ‘e’ = 17.5 mm, Length designation: ‘La’ 15.8 mm

Standard Designation 4 HCX 350

HCX ‘H’ denotes Banded Belt

No. of bands

4 HXPB 2500 HXPB 2500

350

‘350’ Li (inches)

No. of bands

‘H’ denotes Banded Belt

‘CX’ Section

4 H3VX 400 H3VX 400

No. of Bands

‘H’ denotes Banded Belt

2500mm Lp ‘XPB’ is the section

‘40’ La (in inches) 3VX Section

Minimum Order Quantities HAX

HBX

Belt Reference

Minimum Quantity

2HAX 3HAX 4HAX 5HAX 6HAX 8HAX 10HAX 16 - 20 HAX

21 14 10 8 7 5 4 2

HXPZ

2HBX 3HBX 4HBX 5HBX 6HBX 8HBX 10 - 14HBX 16 - 28HBX

HXPA

Belt Reference

Minimum Quantity

2HXPZ 3HXPZ 4HXPZ 5HXPZ 6HXPZ 8HXPZ 10HXPZ 12 - 14HXPZ 16 - 20HXPZ

21 14 10 8 7 5 4 3 2

Minimum Quantity

Belt Reference

14 9 7 5 4 3 2 1

HXPB

Belt Reference

Minimum Quantity

2HXPA 3HXPA 4HXPA 5HXPA 6HXPA 8HXPA 10HXPA 12 - 16HXPA 18 - 32HXPA

16 10 8 6 5 4 3 2 1

H3VX

HXPC

Belt Reference

Minimum Quantity

Belt Reference

Minimum Quantity

2HXPB 3HXPB 4HXPB 5HXPB 6HXPB 8HXPB 10HXPB 14HXPB 16 - 24HXPB

12 8 6 5 4 3 2 1 1

2HXPC 3HXPC 4HXPC 5HXPC 6HXPC 8HXPC 10HXPC 12 - 20 HXPC

10 6 5 4 3 2 2 1

H5VX

Belt Reference

Minimum Quantity

Belt Reference

Minimum Quantity

2H3VX 3H3VX 4H3VX 5H3VX 6H3VX 8H3VX 12 - 14H3VX 16 - 20H3VX 20 - 42H3VX

21 14 10 8 7 5 3 2 1

2H5VX 3H5VX 4H5VX 5H5VX 6H5VX 8H5VX 10 - 12H5VX 16 - 24H5VX

12 8 6 4 4 3 2 1

MUSCLE- XR3 High Power, Maintenance-free Cogged Belts

1 JSSn mw BlfciiSSÿ

Features: • Exceptionally high power rating - up to 40% more than conventional standard V-belt • High transmission efficiency up to 98% providing optimum output • Maintenance free property of the Belt ensures less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C allows the belt to perform even at increasing ambient temperatures • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability offering the best wedging effect between the belt and the pulley flanges • Increased performance due to the engineered Belt design • Smooth running operation • Minimal belt tension loss Product range*: XPZ, XPA, XPB, XPC, 3VX, 5VX Application: Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical Industry, food processing units

*Can be manufactured in other sections and in banded construction upon request. 52

PIX- MUSCLE®-XR3 High Power, Maintenance-Free Belts Wedge Section: MUSCLE-XPZ Standard: PIX Standard 10 mm

•I

Belt length factor (mm) Lp to La Li to Lp Li to La 50 13 37

8 mm

Features: • Power rating - up to 40% more than standard V-belt • High transmission efficiency up to 98% • Less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability • Increased performance due to the engineered Belt design • Smooth running operation

MUSCLE-XPZ Mfg. range Weight/metre (Kgs) 630 to 5000 mm 0.198

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 56 dp (mm) XPZ 10 8 36 55 • Nominal length: Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPZ0630 MUS XR3 XPZ0637 MUS XR3 XPZ0662 MUS XR3 XPZ0670 MUS XR3 XPZ0687 MUS XR3 XPZ0710 MUS XR3 XPZ0722 MUS XR3 XPZ0730 MUS XR3 XPZ0737 MUS XR3 XPZ0750 MUS XR3 XPZ0762 MUS XR3 XPZ0772 MUS XR3 XPZ0787 MUS XR3 XPZ0800 MUS XR3 XPZ0837 MUS XR3 XPZ0850 MUS XR3 XPZ0862 MUS XR3 XPZ0887 MUS XR3 XPZ0900 MUS XR3 XPZ0912 MUS XR3 XPZ0925 MUS XR3 XPZ0937 MUS XR3 XPZ0950 MUS XR3 XPZ0962 MUS XR3 XPZ0987 MUS XR3 XPZ1000 MUS XR3 XPZ1012 MUS XR3 XPZ1030 MUS XR3

630 637 662 670 687 710 722 730 737 750 762 772 787 800 837 850 862 887 900 912 925 937 950 962 987 1000 1012 1030

XPZ1037 MUS XR3 XPZ1060 MUS XR3 XPZ1080 MUS XR3 XPZ1087 MUS XR3 XPZ1112 MUS XR3 XPZ1120 MUS XR3 XPZ1137 MUS XR3 XPZ1150 MUS XR3 XPZ1162 MUS XR3 XPZ1180 MUS XR3 XPZ1187 MUS XR3 XPZ1202 MUS XR3 XPZ1237 MUS XR3 XPZ1250 MUS XR3 XPZ1262 MUS XR3 XPZ1270 MUS XR3 XPZ1280 MUS XR3 XPZ1287 MUS XR3 XPZ1320 MUS XR3 XPZ1337 MUS XR3 XPZ1362 MUS XR3 XPZ1400 MUS XR3 XPZ1412 MUS XR3 XPZ1420 MUS XR3 XPZ1437 MUS XR3 XPZ1450 MUS XR3 XPZ1500 MUS XR3 XPZ1512 MUS XR3

1037 1060 1080 1087 1112 1120 1137 1150 1162 1180 1187 1202 1237 1250 1262 1270 1280 1287 1320 1337 1362 1400 1412 1420 1437 1450 1500 1512

• Non standard stock items are available upon request

Belt Reference

XPZ1520 MUS XR3 XPZ1537 MUS XR3 XPZ1550 MUS XR3 XPZ1587 MUS XR3 XPZ1600 MUS XR3 XPZ1650 MUS XR3 XPZ1687 MUS XR3 XPZ1700 MUS XR3 XPZ1750 MUS XR3 XPZ1800 MUS XR3 XPZ1850 MUS XR3 XPZ1900 MUS XR3 XPZ1950 MUS XR3 XPZ2000 MUS XR3 XPZ2030 MUS XR3 XPZ2120 MUS XR3 XPZ2160 MUS XR3 XPZ2360 MUS XR3 XPZ2410 MUS XR3 XPZ2650 MUS XR3 XPZ2690 MUS XR3 XPZ2800 MUS XR3 XPZ2840 MUS XR3 XPZ3000 MUS XR3 XPZ3150 MUS XR3 XPZ3350 MUS XR3 XPZ3550 MUS XR3

Datum/Pitch Length (mm)

1520 1537 1550 1587 1600 1650 1687 1700 1750 1800 1850 1900 1950 2000 2030 2120 2160 2360 2410 2650 2690 2800 2840 3000 3150 3350 3550

PIX- MUSCLE®-XR3 High Power Maintenance-Free Belts Wedge Section: MUSCLE-XPA Standard: PIX Standard

Belt Reference

Datum/Pitch Length (mm)

XPA0757 MUS XR3 XPA0782 MUS XR3 XPA0800 MUS XR3 XPA0832 MUS XR3 XPA0850 MUS XR3 XPA0857 MUS XR3 XPA0882 MUS XR3 XPA0900 MUS XR3 XPA0907 MUS XR3 XPA0925 MUS XR3 XPA0932 MUS XR3 XPA0950 MUS XR3 XPA0957 MUS XR3 XPA0975 MUS XR3 XPA0982 MUS XR3 XPA1000 MUS XR3 XPA1007 MUS XR3 XPA1030 MUS XR3 XPA1060 MUS XR3 XPA1082 MUS XR3 XPA1090 MUS XR3 XPA1107 MUS XR3 XPA1120 MUS XR3 XPA1140 MUS XR3 XPA1150 MUS XR3

757 782 800 832 850 857 882 900 907 925 932 950 957 975 982 1000 1007 1030 1060 1082 1090 1107 1120 1140 1150

Belt length factor (mm) Lp to La Li to Lp Li to La 63 18 45

10 mm

Features: 13 mm • Power rating - up to 40% more than standard V-belt • High transmission efficiency up to 98% • Less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability • Increased performance due to the engineered Belt design • Smooth running operation

MUSCLE-XPA Mfg. range Weight/metre (Kgs) 745 to 5000 mm 0.399

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 71 dp (mm) XPA 13 10 36 42 • Nominal length: Pitch length ‘Lp’ in mm

Datum/Pitch Length (mm)

Belt Reference

XPA1157 MUS XR3 XPA1180 MUS XR3 XPA1207 MUS XR3 XPA1232 MUS XR3 XPA1250 MUS XR3 XPA1257 MUS XR3 XPA1282 MUS XR3 XPA1307 MUS XR3 XPA1320 MUS XR3 XPA1332 MUS XR3 XPA1357 MUS XR3 XPA1382 MUS XR3 XPA1400 MUS XR3 XPA1450 MUS XR3 XPA1457 MUS XR3 XPA1482 MUS XR3 XPA1500 MUS XR3 XPA1507 MUS XR3 XPA1532 MUS XR3 XPA1550 MUS XR3 XPA1582 MUS XR3 XPA1600 MUS XR3 XPA1632 MUS XR3 XPA1650 MUS XR3 XPA1657 MUS XR3

1157 1180 1207 1232 1250 1257 1282 1307 1320 1332 1357 1382 1400 1450 1457 1482 1500 1507 1532 1550 1582 1600 1632 1650 1657

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

XPA1680 MUS XR3 XPA1700 MUS XR3 XPA1732 MUS XR3 XPA1750 MUS XR3 XPA1782 MUS XR3 XPA1800 MUS XR3 XPA1850 MUS XR3 XPA1900 MUS XR3 XPA1950 MUS XR3 XPA2000 MUS XR3 XPA2060 MUS XR3 XPA2120 MUS XR3 XPA2240 MUS XR3 XPA2360 MUS XR3 XPA2432 MUS XR3 XPA2500 MUS XR3 XPA2650 MUS XR3 XPA2800 MUS XR3 XPA3000 MUS XR3 XPA3150 MUS XR3 XPA3350 MUS XR3 XPA3550 MUS XR3 XPA3750 MUS XR3

1680 1700 1732 1750 1782 1800 1850 1900 1950 2000 2060 2120 2240 2360 2432 2500 2650 2800 3000 3150 3350 3550 3750

PIX- MUSCLE®-XR3 High Power Maintenance-Free Belts Wedge Section: MUSCLE-XPB Standard: PIX Standard 17 mm

Mfg. range Weight/metre (Kgs) 900 to 5000 mm 0.560

Belt length factor (mm) Lp to La Li to Lp Li to La 28 88 60

14 mm

MUSCLE-XPB Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 112 dp (mm) XPB 17 14 36 33 • Nominal length: Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPB1000 MUS XR3 XPB1060 MUS XR3 XPB1120 MUS XR3 XPB1180 MUS XR3 XPB1250 MUS XR3 XPB1260 MUS XR3 XPB1320 MUS XR3 XPB1340 MUS XR3 XPB1400 MUS XR3 XPB1410 MUS XR3 XPB1450 MUS XR3 XPB1500 MUS XR3 XPB1510 MUS XR3 XPB1550 MUS XR3 XPB1590 MUS XR3 XPB1600 MUS XR3

1000 1060 1120 1180 1250 1260 1320 1340 1400 1410 1450 1500 1510 1550 1590 1600

XPB1650 MUS XR3 XPB1690 MUS XR3 XPB1700 MUS XR3 XPB1790 MUS XR3 XPB1800 MUS XR3 XPB1850 MUS XR3 XPB1900 MUS XR3 XPB1950 MUS XR3 XPB2000 MUS XR3 XPB2020 MUS XR3 XPB2120 MUS XR3 XPB2150 MUS XR3 XPB2240 MUS XR3 XPB2360 MUS XR3 XPB2500 MUS XR3 XPB2650 MUS XR3

1650 1690 1700 1790 1800 1850 1900 1950 2000 2020 2120 2150 2240 2360 2500 2650

Belt Reference

Datum/Pitch Length (mm)

XPB2680 MUS XR3 XPB2800 MUS XR3 XPB2900 MUS XR3 XPB2990 MUS XR3 XPB3000 MUS XR3 XPB3150 MUS XR3 XPB3350 MUS XR3 XPB3440 MUS XR3 XPB3550 MUS XR3 XPB3750 MUS XR3 XPB4000 MUS XR3 XPB4250 MUS XR3 XPB4500 MUS XR3 XPB4750 MUS XR3 XPB5000 MUS XR3

2680 2800 2900 2990 3000 3150 3350 3440 3550 3750 4000 4250 4500 4750 5000

PIX- MUSCLE -XR3 High Power Maintenance-Free Belts ®

Wedge Section: MUSCLE-XPC Standard: PIX Standard

MUSCLE-XPC Belt length factor (mm) Lp to La Li to Lp Li to La 113 30 83

18 mm

22 mm Features: • Power rating - up to 40% more than standard V-belt • High transmission efficiency up to 98% • Less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability • Increased performance due to the engineered Belt design • Smooth running operation

Mfg. range Weight/metre (Kgs) 1000 to 5000 mm 0.925

Rec. min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) pulley dia. (No. of V-Belts) 180 dp (mm) XPC 22 18 38 25 • Nominal length: Pitch length ‘Lp’ in mm

Belt Reference

Datum/Pitch Length (mm)

Belt Reference

Datum/Pitch Length (mm)

XPC1900 MUS XR3 XPC2000 MUS XR3 XPC2060 MUS XR3 XPC2120 MUS XR3 XPC2240 MUS XR3

1900 2000 2060 2120 2240

XPC3000 MUS XR3 XPC3150 MUS XR3 XPC3350 MUS XR3 XPC3550 MUS XR3 XPC3650 MUS XR3

3000 3150 3350 3550 3650

• Non standard stock items are available upon request

Belt Reference

Datum/Pitch Length (mm)

XPC4000 MUS XR3 XPC4250 MUS XR3 XPC4500 MUS XR3 XPC5000 MUS XR3

4000 4250 4500 5000

PIX- MUSCLE®-XR3 High Power Maintenance-Free Belts Narrow Section: MUSCLE-3VX Standard: PIX Standard

Belt Reference

3VX260 MUS XR3 3VX265 MUS XR3 3VX280 MUS XR3 3VX300 MUS XR3 3VX315 MUS XR3 3VX335 MUS XR3

Belt length factor (mm) Lp to La Li to Lp Li to La 13 50 37

8 mm

Features: 9.7 mm • Power rating - up to 40% more than standard V-belt h • High transmission efficiency up to 98% • Less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability • Increased performance due to the engineered Belt design • Smooth running operation

MUSCLE-3VX Mfg. range Weight/metre (Kgs) 24.5” to 190” 0.188

Rec. min MOQ Dimensions (mm) Angle Top width Thickness (Degree) pulley dia. (No. of V-Belts) 56 de (mm) 3VX 9.7 8 38 42 Nominal Length : Belt no /10 = outside length in inches Section

Outside Length (mm)

Belt Reference

Outside Length (mm)

660 673 711 762 800 851

3VX350 MUS XR3 3VX355 MUS XR3 3VX370 MUS XR3 3VX375 MUS XR3 3VX400 MUS XR3 3VX425 MUS XR3

889 902 940 953 1016 1080

Belt Reference

Outside Length (mm)

3VX450 MUS XR3 3VX475 MUS XR3 3VX500 MUS XR3 3VX530 MUS XR3

1143 1207 1270 1346

PIX- MUSCLE -XR3 High Power Maintenance-Free Belts ®

Narrow Section: MUSCLE-5VX Standard: PIX Standard

MUSCLE-5VX 15.8 mm H

Belt length factor (mm) Lp to La Li to Lp Li to La 85 25 60

14 mm

IFeatures: • Power rating - up to 40% more than standard V-belt • High transmission efficiency up to 98% • Less machine downtime and an extended service life • Complies with ISO 1813 - having the antistatic property • Temperature range from -35°C to +130°C • Space saving potential • REACH & RoHS compliant provides an eco-friendly system • High dimensional stability • Increased performance due to the engineered Belt design • Smooth running operation

Mfg. range Weight/metre (Kgs) 35.5”to 190” 0.502

Rec. Min MOQ Dimensions (mm) Angle Section Top width Thickness (Degree) Pulley Dia. (No. of V-Belts) 112 de (mm) 5VX 15.8 14 38 25 • Nominal Length : Belt no /10 = outside length in inches

Belt Reference

Outside Length (mm)

Belt Reference

Outside Length (mm)

5VX0500 MUS XR3 5VX0530 MUS XR3 5VX0560 MUS XR3 5VX0600 MUS XR3 5VX0630 MUS XR3 5VX0670 MUS XR3 5VX0710 MUS XR3

1270 1346 1422 1524 1600 1702 1803

5VX0750 MUS XR3 5VX0800 MUS XR3 5VX0850 MUS XR3 5VX0900 MUS XR3 5VX0950 MUS XR3 5VX1000 MUS XR3 5VX1060 MUS XR3

1905 2032 2159 2286 2413 2540 2692

• Non standard stock items are available upon request

Belt Reference

Outside Length (mm)

5VX1120 MUS XR3 5VX1180 MUS XR3 5VX1250 MUS XR3 5VX1320 MUS XR3 5VX1400 MUS XR3

2845 2997 3175 3353 3556

PIX- X’tra - XV ®

Variable Speed Raw Edge Cogged Belts

ZG 2G ZG

Features: ? Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where belt stress is more ? Firm gripping action in the contact areas provide positive traction for precise, immediate response ? Higher power transmission than regular Belts ? Longer service-life ? Facilitates smooth running without excessive vibrations ? Specific belt-design for maximum longitudinal flexibility ? Temperature range: -25°C to +100°C

Range: 22V-A22/1422V, 30V-A22/1922V, 37V-A22/2322V, 30V-A26/1926V, 46V-A26/2926V, 51V-A26/3226V, 40V-A30/2530V, 51V-A30/3230V, 70V-A30/4430V, 64V-A36/4036V, 70V-A36/4436V, 76V-A36/4836V, HG, HH, HI, HJ, HK, HL, HM, HN, HO

Application: For use on variable speed pulley drives requiring exact speed control and maximum range of speed changes. Ideal for recreational equipment, agricultural applications and machine tools.

X’tra -XV Raw Edge Cogged Variable Speed Belts Standard: RMA IP 25/1991

PIX-

Features: • Excellent transverse rigidity and flexibility to prevent bucking at minium diameter settings where belt stress is more • Longer service-life • Firm gripping action in the contact areas provide positive traction for precise, immediate response • Higher power transmission than regular Belts • Facilitates smooth running without excessive vibrations • Specific belt-design for maximum longitudinal flexibility • Temperature range: -25°C to +100°C

Dimensions Topwidth(x) Thickness(y) Angle (mm) (mm)

Belt Reference

Inside Length (mm)

Belt Reference

Inside Length (mm)

X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8 X22x8

838 864 864 864 1065 1065 1065 1168 1184 1295 1372 1920

X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13 X46x13

1420 1488 1565 1640 1740 1845 1970 2280 2300 2440 2840 3198

X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10 X30x10

920 980 1060 1080 1155 1168 1229 1320 1336 1340 1380 1425 1535 1600 1700 1844 2048 3015

X51x13 X51x13 X51x13 X51x13 X51x13 X51x13 X51x13 X51x13 X51x13 X51x13 X51x13

1488 1565 1640 1740 1845 1970 2280 2300 2440 2840 3375

X37x11 X37x11 X37x11 X37x11 X37x11 X37x11 X37x11 X37x11 X37x11

1069 1120 1170 1234 1323 1374 1527 2545 3018

X40x15 X40x15 X40x15 X40x15 X40x15 X40x15 X40x15 X40x15

1293 1397 1460 1600 1676 2007 2134 2286

X30x11 X30x11 X30x11 X30x11 X30x11 X30x11 X30x11 X30x11 X30x11

935 1016 1040 1095 1290 1375 1527 2545 3018

X51x16 X51x16 X51x16 X51x16 X51x16 X51x16 X51x16 X51x16 X51x16 X51x16 X51x16

1488 1565 1640 1740 1845 1970 2280 2300 2440 2840 3380

X70x18 X70x18 X70x18 X70x18 X70x18

1488 1565 1640 1740 1845

• Non standard stock items are available on request • Standard Designation for Variable Belts: Refer page no.60 • Double-sided cogged Belts are available on request

22 30 37 30 46 51 40 51 70 64 70 76

8 10 11 11 13 13 15 16 18 18 18 19

22 22 22 26 26 26 30 30 30 36 36 36

Manufacturing Range (Li) 815 - 1920 920 - 3015 1036 - 3018 922 - 3018 1370 - 3198 1445 - 3375 1293 - 3198 1450 - 3380 1455 - 3385 1455 - 3385 1455 - 3385 1458 - 3388

Belt Reference

Inside Length (mm)

X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18

1970 2000 2300 2440 2840 3000 3385

X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18 X64x18

1488 1565 1640 1700 1740 1845 1900 1970 2280 2300 2440 2840 3385

X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18 X70x18

1455 1468 1500 1700 1800 2000 2159 2200 2310 2500 2700 2800 2900 3000 3353

X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19 X76x19

1488 1565 1600 1640 1700 1740 1845 1970 2280 2300 2440 2840 3388

PIX- X’tra -VX Raw Edge Cogged Variable Speed Belts ®

Standard: RMA IP 25, ISO 3410, BS 3733 Features: • Oil resistant • Antistatic • Available also in Polyester/Aramid (Kevlar) cord construction • Variable Speed Belts in Wrapped Construction also available • Belt Angle: 22° to 40°

Belt Reference

Inside Length (mm)

VX 13x5 VX 13x5 VX 13x5 VX 13x5 VX 13x5 VX 13x5 VX 13x5

600 700 750 850 900 1000 1180

VX 17x5 VX 17x5 VX 17x5 VX 17x5 VX 17x5

606 686 776 875 976

VX 20x10 VX 20x10 VX 20x10 VX 20x10 VX 20x10 VX 20x10

600 700 800 900 1000 1500

VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6 VX 21x6

600 610 675 700 750 770 800 850 870 900 970 1120 1180 1220

VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8

650 700 750 800 830

Dimensions Mfg. Topwidth(x) Thickness(y) range (Li) (mm) (mm)

6 to 13 6 to 17 6 to 20 6 to 21 6 to 22 6 to 26 6 to 28 6 to 30 6 to 32 6 to 35 6 to 37 6 to 41 6 to 47

Belt Reference

Inside Length (mm)

VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8 VX 22x8

850 880 900 950 1000 1060 1150 1185 1250 1320 1400 1500

VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8 VX 26x8

630 655 672 750 762 800 850 862 950 962 1082 1212 1562

VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8 VX 28x8

600 650 700 750 800 850 950 1060 1180 1250 1320 1400 1450 1500

Belt Reference

Inside Length (mm)

VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10 VX 30x10

650 665 700 850 900 925 950 1035 1050 1200 1340 1500 1600 1700 1750

VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10 VX 32x10

750 790 850 900 950 1073 1120 1180 1250 1353 1400 1600

VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12 VX 35x12

800 850 900 950 1000 1050 1100 1180 1250 1300 1400 1500

Thickness (mm)

Min Angle Pulley Dia. (Degrees) (mm)

5.0 to 12.5 5.0 to 12.5 5.0 to 12.5 5.0 to 12.5 5.0 to 12.5 5.0 to 12.5 5.0 to 12.5 5.0 to 16.0 5.0 to 20.0 5.0 to 20.0 5.0 to 20.0 5.0 to 20.0 5.0 to 20.0

23.5 - 29.50 23.5 - 29.50 23.5 - 29.50 23.5 - 29.50 23.5 - 29.50 23.5 - 29.50 23.5 - 29.50 30.0 - 200.0 30.0 - 200.0 30.0 - 200.0 30.0 - 200.0 30.0 - 200.0 30.0 - 200.0

Belt Reference

Inside Length (mm)

VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10 VX 37x10

660 800 850 900 950 1000 1020 1120 1250 1400 1500 1700 1800

VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13 VX 41x13

900 925 1000 1040 1060 1120 1180 1250 1340 1400 1440 1600 1740 1940 2180

VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13 VX 47x13

960 1000 1060 1180 1250 1400 1500 1600 1740 1790 1800

PIX- Duo -XV Double Cog Variable Speed Belts ®

Standard: RMA IP 25, ISO 3410, BS 3733 Features: • Highly flexible • Transmit power from both the sides • This special construction allows belt to be used in “Serpentine-drive” system • Variable Speed Belts in Wrapped Construction also available

Top Width (mm) 13.0-85.0

• Non standard stock items are available on request • Standard Designation for Variable Belts: Refer page no.60 • Double-sided cogged Belts are available on request

10.0 - 30.0

22-40

■

Manufacturing Range Min. Max. 23.5" 200"

Length Desig. Li

Standard Designation

Manufacturing data (BS 3733 : 1974) Cross Sections : Profile HI HJ HK Top width 25 32 38 Thickness 13 15 18

Cross Sections Nomenclature : 14 22 V 450 (S.I. System) 14

14/16” Top Width

V 450

Groove Angle 22

HL 45 20

HM 51 22

45” Pitch Length (Lp) • Standard Length Designation - Pitch Length (Lp) in mm

Vari Speed

• Apart from the above standard range, the product can be manufactured as per the range given below. However, the details such as top width, thickness, angle or bottom width, length (Li/La/Lp, mm/inches)

RANGE: VARI SPEED BELTS Cross Sections Nomenclature : 22 V 1150 A22 (Metric System) 22

Top width - 6 mm to 85 mm Angle 22 - 40 (degrees)

V 1150 A22

22 mm Top Width Vari Speed

Manufacturing data (ISO 3410 : 1989 (E)) Cross Sections : Profile HG HH HI HJ Top width 17.0 20.0 25.0 32.0 Thickness 8 10 13.0 15.0

Groove Angle 220 1150 mm Effective Length

HK 38.0 18.0

HL 45.0 20.0

HM 51.0 24.0

HN 57.0 24.0

• Standard Length Designation - Datum Length (Ld) in mm Top width : 6 mm to 85 mm Angle 22 - 40 (degrees)

HO 64.0 25.0

Thickness 5 mm (REC/REP) 8 mm (REC/REP) 9 mm (REC/REP) 10 mm (REC/REP) 11 mm (REC/REP) 12 mm (REC/REP) 13 mm (REC/REP) 14 mm (REC/REP) 15 mm (REC/REP) 16 mm (REC/REP) 17 mm (REC/REP) 18 mm (REC/REP) 19 mm (REC/REP) 20 mm (REC) 21- 30 mm (REC) 20 - 22 mm (REP)

Size (Li) 600 mm - 2184 mm 600 mm - 5080 mm 600 mm - 5080 mm 600 mm - 5080 mm 600 mm - 5080 mm 600 mm - 5080 mm 686 mm - 5080 mm 686 mm - 5080 mm 686 mm - 5080 mm 686 mm - 5080 mm 889 mm - 5080 mm 889 mm - 5080 mm 889 mm - 5080 mm 889 mm - 5080 mm 1067 mm - 5080 mm 1067 mm - 5080 mm

X’ceed® Ribbed / Poly V-Belts

pix-**™-'; i

iSiS

Features: • High resistance to oil, heat, dust and cracking • Uniform load distribution all over the cross section • Top fabric layer for lateral stiffness • Constant speed ratio • Suitable for drives with inside and outside idlers • Extremely flexible with reduced thickness • Can be used on drives from the reverse side and in compact layouts • High surface speed combined with high speed ratios • Less noise, vibration and weight, ideal for domestic appliances Application: • Compact drives with high speed ratios • Drives requiring minimum maintenance • Drives in a noise-sensitive environment • Serpentine drives, V-flat drives, and drives with reverse bend idlers Sections & Application: • Sections J, L and M are used in general machinery • Section H is used in domestic appliances, e.g. washing machines, dryers • Section K is used in automotive industry for ancillary drives

X’ceed Ribbed / Poly V-Belts Section: PH Standard: RMA / MPTA IP-26

PIX

H / PH

Features : • Good flexibility with high power carrying capacity per unit width • Temperature range: -25°C to +1000C 1.6 mm • Speed ratios over 1:30 are possible h H • Maximum belt speed up to 50 m/sec 2.9 mm • Antistatic, oil & heat resistant, low stretch • ATEX certified FRAS Belts are also available • Number of ribs per sleeve : 280

—

Mfg. range Weight/metre (Kgs) 356 to 3000 mm 0.015

Rec. min MOQ Dimensions (mm) Max.Belt Rib Pitch Thickness speed (m/sec) pulley dia. (No. of Sleeves) 13 de (mm) PH 1.6 2.9 50 1 • Nominal Length: Effective length ‘Le’ • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934) Section

Belt Reference

Effective Length (inches)

Belt Reference

Effective Length (inches)

RBMH0300R RBMH0380R RBMH0559R RBMH0698R RBMH0735R RBMH0762R RBMH0813R RBMH0858R RBMH0864R RBMH0886R RBMH0914R RBMH0955R RBMH0965R RBMH0975R RBMH0990R RBMH1016R

11.8 15.0 22.0 27.5 28.9 30.0 32.0 33.8 34.0 34.9 36.0 37.5 38.0 38.4 39.0 40.0

RBMH1080R RBMH1092R RBMH1096R RBMH1168R RBMH1194R RBMH1200R RBMH1222R RBMH1230R RBMH1244R RBMH1262R RBMH1270R RBMH1285R RBMH1290R RBMH1301R RBMH1309R RBMH1316R

42.5 43.0 43.1 46.0 47.0 47.2 48.1 48.4 49.0 49.7 50.0 50.6 50.8 51.2 51.5 51.8

• Non standard stock items are available on request • Standard Designation for Poly V-Belts: Refer page no.64 • Double-sided Poly V-Belts & aramid cord Poly V-Belts are available on request

Belt Reference

Effective Length (inches)

RBMH1321R RBMH1333R RBMH1371R RBMH1397R RBMH1439R RBMH1475R RBMH1600R RBMH1854R RBMH1895R RBMH1930R RBMH1956R RBMH1992R RBMH2083R RBMH2155R

52.0 52.5 54.0 55.0 56.7 58.1 63.0 73.0 74.6 76.0 77.0 78.4 82.0 84.8

X’ceed Ribbed / Poly V-Belts Section: J/PJ Standard: RMA / MPTA IP-26

PIX

J / PJ

Features : • Good flexibility with high power carrying capacity per unit width • Temperature range: -25°C to +1000C 2.34 mm • Speed ratios over 1:30 are possible • Maximum belt speed up to 50 m/sec • Antistatic, oil & heat resistant, low stretch • ATEX certified FRAS Belts are also available • Number of ribs per sleeve: 235

3.8 mm

Mfg. range Weight/metre (Kgs) 280 to 5080 mm 0.079

Rec. min MOQ Dimensions (mm) Max. Belt Section Rib Pitch Thickness speed (m/sec) pulley dia. (No. of Sleeves) 20 de (mm) J/PJ 2.34 3.8 50 1 • Nominal Length : Effective length ‘Le’ • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Effective Length (inches)

Belt Reference

Effective Length (inches)

RBMJ0280R RBMJ0294R RBMJ0299R RBMJ0307R RBMJ0309R RBMJ0310R RBMJ0312R RBMJ0325R RBMJ0330R RBMJ0345R RBMJ0356R RBMJ0362R RBMJ0376R RBMJ0381R RBMJ0392R RBMJ0400R RBMJ0406R RBMJ0414R RBMJ0432R RBMJ0444R RBMJ0445R RBMJ0457R RBMJ0483R RBMJ0508R RBMJ0522R RBMJ0528R RBMJ0533R RBMJ0559R RBMJ0584R RBMJ0599R RBMJ0605R RBMJ0610R RBMJ0640R RBMJ0660R RBMJ0711R RBMJ0723R RBMJ0737R RBMJ0762R RBMJ0769R RBMJ0787R

11.02 11.57 11.77 12.09 12.17 12.20 12.28 12.80 12.99 13.58 14.02 14.25 14.80 15.00 15.43 15.75 15.98 16.30 17.01 17.48 17.52 17.99 19.02 20.00 20.55 20.79 20.98 22.01 22.99 23.58 23.82 24.02 25.20 25.98 27.99 28.46 29.02 30.00 30.28 30.98

RBMJ0813R RBMJ0836R RBMJ0838R RBMJ0864R RBMJ0870R RBMJ0889R RBMJ0914R RBMJ0920R RBMJ0955R RBMJ0965R RBMJ0990R RBMJ0991R RBMJ1016R RBMJ1054R RBMJ1065R RBMJ1067R RBMJ1092R RBMJ1105R RBMJ1110R RBMJ1116R RBMJ1123R RBMJ1130R RBMJ1143R RBMJ1150R RBMJ1152R RBMJ1168R RBMJ1194R RBMJ1200R RBMJ1219R RBMJ1222R RBMJ1244R RBMJ1245R RBMJ1254R RBMJ1257R RBMJ1262R RBMJ1270R RBMJ1280R RBMJ1285R RBMJ1287R RBMJ1295R

32.01 32.91 32.99 34.02 34.25 35.00 35.98 36.22 37.60 37.99 38.98 39.02 40.00 41.50 41.93 42.01 42.99 43.50 43.70 43.94 44.21 44.49 45.00 45.28 45.35 45.98 47.01 47.24 47.99 48.11 48.98 49.02 49.37 49.49 49.69 50.00 50.39 50.59 50.67 50.98

• Non standard stock items are available on request • Standard Designation for Poly V-Belts: Refer page no.64 • Double-sided Poly V-Belts & aramid cord Poly V-Belts are available on request

Belt Reference

Effective Length (inches)

RBMJ1301R RBMJ1309R RBMJ1316R RBMJ1321R RBMJ1333R RBMJ1355R RBMJ1358R RBMJ1371R RBMJ1397R RBMJ1428R RBMJ1439R RBMJ1461R RBMJ1473R RBMJ1475R RBMJ1549R RBMJ1600R RBMJ1651R RBMJ1663R RBMJ1702R RBMJ1752R RBMJ1753R RBMJ1778R RBMJ1780R RBMJ1854R RBMJ1892R RBMJ1895R RBMJ1910R RBMJ1915R RBMJ1930R RBMJ1956R RBMJ1965R RBMJ1981R RBMJ1992R RBMJ2083R RBMJ2155R RBMJ2210R RBMJ2300R RBMJ2337R RBMJ2489R

51.22 51.54 51.81 52.01 52.48 53.35 53.46 53.98 55.00 56.22 56.65 57.52 57.99 58.07 60.98 62.99 65.00 65.47 67.01 68.98 69.02 70.00 70.08 72.99 74.49 74.61 75.20 75.39 75.98 77.01 77.36 77.99 78.43 82.01 84.84 87.01 90.55 92.01 97.99

PIX- X’ceed Ribbed / Poly V-Belts ®

Section: L/PL Standard: RMA / MPTA IP-26

L / PL

Features : • Good flexibility with high power carrying capacity per unit width • Temperature range: -25°C to +1000C 4.7 mm • Speed ratios over 1:30 are possible • Maximum belt speed up to 50 m/sec 7.6 mm • Antistatic, oil & heat resistant, low stretch • ATEX certified FRAS Belts are also available • No of ribs per sleeve: 110

Mfg. range Weight/metre (Kgs) 500 to 5080mm 0.105

MOQ. Rec. min Max.Belt Dimensions (mm) Section Rib Pitch Thickness speed m/sec pulley dia. (No. of Sleeves) PL 4.7 7.6 50 1 75 de(mm) • Nominal Length : Effective length ‘Le’ • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Reference

Effective Length (inches)

Belt Reference

Effective Length (inches)

RBML0865R RBML0954R RBML0991R RBML1041R RBML1075R RBML1143R RBML1168R RBML1194R RBML1219R RBML1270R RBML1295R RBML1334R RBML1371R RBML1372R RBML1397R RBML1422R RBML1435R RBML1462R RBML1473R RBML1499R

865 954 991 1041 1075 1143 1168 1194 1219 1270 1295 1334 1371 1372 1397 1422 1435 1462 1473 1499

RBML1562R RBML1613R RBML1651R RBML1664R RBML1715R RBML1803R RBML1841R RBML1842R RBML1943R RBML1981R RBML2019R RBML2020R RBML2070R RBML2096R RBML2134R RBML2197R RBML2235R RBML2324R RBML2362R RBML2476R

1562 1613 1651 1664 1715 1803 1841 1842 1943 1981 2019 2020 2070 2096 2134 2197 2235 2324 2362 2476

Belt Reference

Effective Length (inches)

RBML2515R RBML2705R RBML2743R RBML2845R RBML2895R RBML2921R RBML2997R RBML3086R RBML3124R RBML3289R RBML3327R RBML3492R RBML3696R RMBL3868R RBML4051R RBML4470R RBML4622R RBML5029R

2515 2705 2743 2845 2895 2921 2997 3086 3124 3289 3327 3492 3696 3868 4051 4470 4622 5029

PIX- X’ceed Ribbed / Poly V-Belts ®

Section: M/PM Standard: RMA / MPTA IP-26

M / PM Mfg. range Weight/metre (Kgs) 950 to 5080 mm 0.376

13.3 mm

Features : • Good flexibility with high power carrying capacity per unit width 9.4 mm • Temperature range: -25°C to +1000C • Speed ratios over 1:30 are possible • Maximum belt speed up to 50 m/sec • Antistatic, oil & heat resistant, low stretch • ATEX certified FRAS Belts are also available • Number of ribs per sleeve: 52

Rec. min MOQ Dimensions (mm) Max.Belt Section Rib Pitch Thickness speed (m/sec) pulley dia. (No. of sleeves) PM 9.4 13.3 50 1 180 de(mm) • Nominal Length : Effective length ‘Le’ • ‘PIX FRAS’ Belts conforms to : © II 2GD c IIB X (Test report no. IB-03-4-934)

Belt Ref.

Effective Length (inches)

Belt Ref.

Effective Length (inches)

RBMM2286R RBMM2388R RBMM2515R RBMM2693R RBMM2832R RBMM2921R

90.00 94.02 99.02 106.02 111.50 115.00

RBMM3010R RBMM3124R RBMM3327R RBMM3531R RBMM3648R RBMM3734R

118.50 122.99 130.98 139.02 143.62 147.01

Belt Ref.

Effective Length (inches)

RBMM4089R RBMM4191R RBMM4470R RBMM4648R RBMM5029R

160.98 165.00 175.98 182.99 197.99

Standard designation Size - 550 J 8 550 55" Effective Length Le

Size - 10 PJ 1397 J

Section

Number of Ribs

1397

Number of Ribs

PJ Section

1397 mm Effective Length Le

• Non standard stock items are available on request • Double-sided Poly V-Belts & aramid cord Poly V-Belts are available on request

X’act® Timing / Synchronous Belts

F F F

0059 0059 0059 0059 0059

PIX-X’act® Classical Synchronous Belts Features : ? Trapezoidal tooth profile ? High efficiency characteristics, due to positive engagement between belt teeth and pulley grooves ? Conforms to BS 4548 standard PIX-X’act® HTD Synchronous Belts Features : ? Modified tooth profile for improved stress distribution ? Reduced tooth jump due to deeper tooth design ? High efficiency characteristics, due to positive engagement between belt teeth and pulley grooves ? Increased power transmission capacity ? Conforms to ISO 13050 PIX-X’act® STD Synchronous Belts Features : ? Modified curvilinear tooth design ? Modified and accurately spaced teeth ensure optimum entry / exit ? Minimum noise level ? Fibre glass tensile cords provide strength, excellent flex life and high resistance to elongation ? Durable backing protects against environment pollution, friction and wear ? Tough nylon facing protects the tooth surface

CT Timing/ Synchronous Belts Classical Section: MXL Standard: BS 4548

PIX- X’act

Features : • Trapezoidal tooth profile • High efficiency • No high tensioning required • Temp. range: -25°C to +100°C

MXL

1.14

0.59

2.032

Mfg. Range Weight per metre/sleeve (Kgs) 21MXL to 1771MXL -

Section

MXL

Pitch (mm) 2.032

Tooth Height (mm) Belt Thickness (mm) 0.59 1.14

* Product range and price list is available upon request.

® CT Timing/ Synchronous Belts Classical Section: XXL Standard: BS 4548

PIX- X’act

Features : • Trapezoidal tooth profile • High efficiency • No high tensioning required • Temp. range: -25°C to +100°C

XXL

1 1.52

3.175

i 0.76 T

Mfg. Range Weight per metre/sleeve (Kgs) 50XXL to 219XXL -

Section

Pitch (mm)

XXL

3.175

Section

Number of Teeth

Sleeve Width (mm)

91 XXL 96 XXL 107 XXL 112 XXL 114 XXL 129 XXL 140 XXL 163 XXL 175 XXL

73 77 87 90 91 103 112 130 140

450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90

Tooth Height (mm) Belt Thickness (mm) 0.76

1.52

PIX- X’act

CT Classical Section: XL Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

XL i

2.30

Mfg. range Weight per metre/sleeve (Kgs) 44XL to 2128 XL 1.16

1.27 5.080

Section

Pitch (mm)

5.080

Section

No. of Teeth

Sleeve Width

92 XL 94 XL 98 XL 100 XL 102 XL 104 XL 106 XL 108 XL 110 XL 112 XL 114 XL 116 XL 118 XL 120 XL 122 XL 124 XL 126 XL 128 XL 130 XL 132 XL 134 XL 136 XL 138 XL 140 XL 142 XL 144 XL 146 XL 148 XL 150 XL 152 XL 154 XL 156 XL 158 XL 160 XL 162 XL 164 XL 166 XL 168 XL 170 XL 172 XL 174 XL 176 XL 178 XL 180 XL 182 XL 184 XL 186 XL 188 XL 190 XL 192 XL 194 XL 196 XL 198 XL 200 XL 202 XL 206 XL

46 47 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 103

450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 465 450 450 450 450 465 450 450 450 450 465 450 450 450 450 465 450 450 450 450 465 450 450 450 450 465 450 450 450 450 465 450 450 450 465 465 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.27

2.30

PIX- X’act

CT Classical Section: XL Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

XL i

2.30

Mfg. range Weight per metre/sleeve (Kgs) 44XL to 2128 XL 1.16

1.27 5.080

Section

Pitch (mm)

5.080

Section

No. of Teeth

Sleeve Width

208 XL 210 XL 212 XL 214 XL 218 XL 220 XL 224 XL 226 XL 228 XL 230 XL 234 XL 236 XL 240 XL 242 XL 244 XL 248 XL 250 XL 256 XL 260 XL 264 XL 266 XL 270 XL 274 XL 276 XL 280 XL 282 XL 286 XL 290 XL 300 XL 304 XL 306 XL 310 XL 312 XL 316 XL 320 XL 322 XL 326 XL 330 XL 336 XL 340 XL 344 XL 348 XL 350 XL 352 XL 356 XL 360 XL 362 XL 364 XL 370 XL 372 XL 376 XL 380 XL 384 XL 390 XL 392 XL 400 XL

104 105 106 107 109 110 112 113 114 115 117 118 120 121 122 124 125 128 130 132 133 135 137 138 140 141 143 145 150 152 153 155 156 158 160 161 163 165 168 170 172 174 175 176 178 180 181 182 185 186 188 190 192 195 196 200

450 465 450 450 450 465 450 450 450 465 450 450 465 465 450 450 465 450 465 450 450 465 450 465 465 450 450 450 465 450 450 450 465 450 465 450 450 465 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.27

2.30

PIX- X’act

CT Classical Section: XL Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

XL i

2.30

Mfg. range Weight per metre/sleeve (Kgs) 44XL to 2128 XL 1.16

1.27 5.080

Section

Pitch (mm)

5.080

Section

No. of Teeth

Sleeve Width

412 XL 414 XL 420 XL 424 XL 430 XL 432 XL 434 XL 450 XL 460 XL 480 XL 490 XL 492 XL 498 XL 514 XL 550 XL 560 XL 564 XL 566 XL 574 XL 580 XL 612 XL 630 XL 670 XL 672 XL 686 XL 710 XL 720 XL 736 XL 788 XL 860 XL 888 XL 950 XL 1014 XL 1016 XL 1032 XL 1200 XL 1220 XL 1300 XL 1494 XL 2128 XL

206 207 210 212 215 216 217 225 230 240 245 246 249 257 275 280 282 283 287 290 306 315 335 336 343 355 360 368 394 430 444 475 507 508 516 600 610 650 747 1064

465 450 450 450 450 450 450 465 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.27

2.30

PIX- X’act

CT Classical Section: L Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

L 1 3.60

Mfg. range Weight per metre/sleeve (Kgs) 67L to 2700L 1.62

Section

Pitch (mm)

9.525

1.91 9.525

Section

No. of Teeth

Sleeve Width

98 L 109 L 113 L 124 L 130 L 135 L 143 L 150 L 154 L 158 L 160 L 165 L 169 L 173 L 177 L 180 L 185 L 187 L 191 L 195 L 200 L 203 L 210 L 214 L 217 L 220 L 225 L 233 L 236 L 240 L 244 L 255 L 258 L 263 L 265 L 270 L 275 L 277 L 281 L 285 L 300 L 304 L 315 L 319 L 322 L 328 L 330 L 334 L 337 L 341 L 345 L 352 L 360 L 367 L 371 L 375 L 382 L 387 L

26 29 30 33 35 36 38 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 56 57 58 59 60 62 63 64 65 68 69 70 71 72 73 74 75 76 80 81 84 85 86 87 88 89 90 91 92 94 96 98 99 100 102 103

450 450 450 465 450 450 450 465 450 450 450 465 450 450 450 465 450 465 450 450 450 465 465 450 450 450 465 450 450 465 450 465 450 450 450 465 450 450 450 465 465 450 450 450 465 450 465 450 450 450 465 450 465 465 450 465 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.91

3.60

PIX- X’act

CT Classical Section: L Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

L 1 3.60

Mfg. range Weight per metre/sleeve (Kgs) 67L to 2700L 1.62

Section

Pitch (mm)

9.525

1.91 9.525

Section

No. of Teeth

Sleeve Width

390 L 394 L 397 L 405 L 408 L 412 L 420 L 427 L 435 L 439 L 442 L 450 L 453 L 461 L 465 L 480 L 495 L 500 L 510 L 518 L 525 L 540 L 548 L 555 L 563 L 570 L 574 L 581 L 585 L 600 L 619 L 630 L 634 L 660 L 694 L 697 L 701 L 709 L 720 L 728 L 731 L 765 L 817 L 840 L 855 L 863 L 870 L 881 L 900 L 915 L 934 L 980 L 1028 L 1148 L 1192 L 1406 L 1418 L 1675 L 1988 L 2700 L

104 105 106 108 109 110 112 114 116 117 118 120 121 123 124 128 132 133 136 138 140 144 146 148 150 152 153 155 156 160 165 168 169 176 185 186 187 189 192 194 195 204 218 224 228 230 232 235 240 244 249 261 274 306 318 375 378 447 530 720

465 450 450 450 450 450 465 450 450 450 450 465 450 450 450 465 450 450 465 450 465 465 450 450 450 450 450 450 450 465 450 465 450 465 450 450 450 450 465 450 450 450 450 450 450 450 450 450 450 450 450 450 440 440 440 440 440 440 440 440

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.91

3.60

PIX- X’act

CT Classical Section: H Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

H i

4.30

Mfg. range Weight per metre/sleeve (Kgs) 145H to 2720H 1.16

2.29 12.700

Section

Pitch (mm)

12.7

Section

No. of Teeth

Sleeve Width

145 H 185 H 200 H 205 H 210 H 220 H 225 H 230 H 240 H 245 H 250 H 255 H 260 H 270 H 280 H 285 H 290 H 300 H 310 H 315 H 320 H 325 H 330 H 335 H 340 H 345 H 350 H 355 H 360 H 365 H 370 H 375 H 380 H 390 H 395 H 400 H 405 H 410 H 420 H 425 H 430 H 435 H 440 H 445 H 450 H 455 H 460 H 465 H 470 H 480 H 485 H 490 H 500 H 510 H 515 H 520 H 525 H 530 H

29 37 40 41 42 44 45 46 48 49 50 51 52 54 56 57 58 60 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 79 80 81 82 84 85 86 87 88 89 90 91 92 93 94 96 97 98 100 102 103 104 105 106

450 450 450 450 450 450 450 465 465 450 450 465 450 465 465 465 450 465 450 450 465 450 465 450 465 450 465 450 465 450 465 465 450 465 450 465 450 465 465 450 465 450 465 450 465 450 450 465 465 465 450 465 450 465 450 465 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 2.29

4.30

PIX- X’act

CT Classical Section: H Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

H i

4.30

Mfg. range Weight per metre/sleeve (Kgs) 145H to 2720H 1.16

2.29 12.700

Section

Pitch (mm)

12.7

Section

No. of Teeth

Sleeve Width

535 H 540 H 550 H 555 H 560 H 565 H 570 H 580 H 585 H 590 H 600 H 605 H 610 H 620 H 625 H 630 H 640 H 650 H 660 H 670 H 680 H 690 H 695 H 700 H 710 H 720 H 725 H 730 H 740 H 750 H 760 H 770 H 775 H 780 H 785 H 800 H 810 H 820 H 830 H 840 H 850 H 860 H 880 H 895 H 900 H 920 H 930 H 950 H 960 H 980 H 985 H 1000 H 1020 H 1030 H 1050 H 1100 H 1120 H 1125 H

107 108 110 111 112 113 114 116 117 118 120 121 122 124 125 126 128 130 132 134 136 138 139 140 142 144 145 146 148 150 152 154 155 156 157 160 162 164 166 168 170 172 176 179 180 184 186 190 192 196 197 200 204 206 210 220 224 225

450 465 450 450 465 450 465 450 450 450 465 450 450 450 450 465 450 465 465 465 465 450 450 465 450 440 465 465 450 465 450 465 450 450 450 465 465 465 450 450 465 450 450 450 465 450 450 465 450 450 450 465 450 450 465 465 465 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 2.29

4.30

PIX- X’act

CT Classical Section: H Standard: BS 4548

Timing/ Synchronous Belts

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

H i

4.30

Mfg. range Weight per metre/sleeve (Kgs) 145H to 2720H 1.16

2.29 12.700

Section

Pitch (mm)

12.7

Section

No. of Teeth

Sleeve Width

1130 H 1140 H 1150 H 1170 H 1175 H 1200 H 1250 H 1260 H 1270 H 1325 H 1350 H 1360 H 1380 H 1400 H 1440 H 1450 H 1460 H 1500 H 1510 H 1535 H 1550 H 1560 H 1600 H 1630 H 1660 H 1680 H 1700 H 1750 H 1765 H 1775 H 1855 H 1860 H 1920 H 1995 H 2010 H 2050 H 2100 H 2120 H 2160 H 2200 H 2210 H 2320 H 2355 H 2360 H 2385 H 2440 H 2475 H 2500 H 2600 H 2680 H 2695 H 2700 H 2720 H

226 228 230 234 235 240 250 252 254 265 270 272 276 280 288 290 292 300 302 307 310 312 320 326 332 336 340 350 353 355 371 372 384 399 402 410 420 424 432 440 442 464 471 472 477 488 495 500 520 536 539 540 544

450 465 465 450 450 465 465 450 450 465 465 450 440 465 440 465 440 440 440 440 440 440 465 440 440 440 465 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 450 440 440 440 440 440 440 440 440

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 2.29

4.30

CT Timing/ Synchronous Belts Classical Section: XH Standard: BS 4548

PIX- X’act

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

1 11.20

22.225

i 6.35 T

Mfg. range Weight per metre/sleeve (Kgs) 463XH to 2275XH -

Section

Pitch (mm)

22.225

Section

No. of Teeth

Sleeve Width

463 XH 481 XH 508 XH 560 XH 570 XH 580 XH 604 XH 630 XH 700 XH 710 XH 735 XH 752 XH 761 XH 770 XH 800 XH 805 XH 831 XH 840 XH 850 XH 901 XH 919 XH 927 XH 980 XH 1000 XH 1120 XH 1200 XH 1260 XH 1400 XH 1540 XH 1750 XH 2275 XH

53 55 58 64 65 66 69 72 80 81 84 86 87 88 91 92 95 96 97 103 105 106 112 114 128 137 144 160 176 200 260

430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430 430

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 6.35

11.20

CT Timing/ Synchronous Belts Classical Section: XXH Standard: BS 4548

PIX- X’act

Features : • Trapezoidal tooth profile • High efficiency • No re-tensioning is required • Temp. range: -25°C to +100°C

XXH

1 15.70

Mfg. range Weight per metre/sleeve (Kgs) 625XXH to 2000XXH -

i T

9.53 31.750

Section

Pitch (mm)

XXH

31.750

Section

No. of Teeth

Sleeve Width

625 XXH 650 XXH 700 XXH 800 XXH 1000 XXH 1050 XXH 1200 XXH 1250 XXH 1400 XXH 1600 XXH 1800 XXH 1925 XXH 2000 XXH

50 52 56 64 80 84 96 100 112 128 144 154 160

430 430 430 430 430 430 430 430 430 430 430 430 430

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 9.53

15.70

PIX- X’act HTD Timing / Synchronous Belts Section: 3M Standard: ISO 13050 / PIX Standard ®

Features : • Curvilinear tooth profile • Reduced tooth jump • High efficiency • Increased power transmission capacity • No high tension is required • Temp. range: -25°C to +100°C

3M 1

2.40

Mfg. range Weight per metre/sleeve (Kgs) 60 3M to 6804 3M 1.84

1.17 3.00

Section

Pitch (mm)

3.00

Section

No. of Teeth

Sleeve Width (mm)

249 3M 252 3M 255 3M 258 3M 261 3M 264 3M 267 3M 270 3M 273 3M 276 3M 279 3M 282 3M 285 3M 288 3M 291 3M 294 3M 297 3M 300 3M 306 3M 309 3M 312 3M 315 3M 318 3M 321 3M 324 3M 327 3M 330 3M 333 3M 336 3M 339 3M 342 3M 345 3M 348 3M 357 3M 360 3M 363 3M 366 3M 369 3M 375 3M 384 3M 390 3M 393 3M 396 3M 399 3M 405 3M 420 3M 423 3M 426 3M 435 3M 438 3M 444 3M 447 3M 459 3M 456 3M 462 3M 465 3M 468 3M

83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 119 120 121 122 123 125 128 130 131 132 133 135 140 141 142 145 146 148 149 153 152 154 155 156

450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.17

2.40

PIX- X’act HTD Timing / Synchronous Belts Section: 3M Standard: ISO 13050 / PIX Standard ®

Features : • Curvilinear tooth profile • Reduced tooth jump • High efficiency • Increased power transmission capacity • No high tension is required • Temp. range: -25°C to +100°C

3M 1

2.40

Mfg. range Weight per metre/sleeve (Kgs) 60 3M to 6804 3M 1.84

1.17 3.00

Section

Pitch (mm)

3.00

Section

No. of Teeth

Sleeve Width (mm)

471 3M 474 3M 477 3M 480 3M 483 3M 486 3M 489 3M 492 3M 495 3M 501 3M 507 3M 510 3M 513 3M 519 3M 522 3M 525 3M 531 3M 534 3M 537 3M 540 3M 543 3M 546 3M 552 3M 555 3M 558 3M 564 3M 567 3M 570 3M 573 3M 576 3M 579 3M 582 3M 588 3M 591 3M 597 3M 600 3M 606 3M 609 3M 612 3M 630 3M 633 3M 639 3M 648 3M 654 3M 657 3M 669 3M 675 3M 684 3M 687 3M 699 3M 708 3M 711 3M 720 3M 735 3M 750 3M 753 3M 765 3M

157 158 159 160 161 162 163 164 165 167 169 170 171 173 174 175 177 178 179 180 181 182 184 185 186 188 189 190 191 192 193 194 196 197 199 200 202 203 204 210 211 213 216 218 219 223 225 228 229 233 236 237 240 245 250 251 255

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.17

2.40

PIX- X’act HTD Timing / Synchronous Belts Section: 3M Standard: ISO 13050 / PIX Standard ®

Features : • Curvilinear tooth profile • Reduced tooth jump • High efficiency • Increased power transmission capacity • No high tension is required • Temp. range: -25°C to +100°C

3M 1

2.40

Mfg. range Weight per metre/sleeve (Kgs) 60 3M to 6804 3M 1.84

1.17 3.00

Section

Pitch (mm)

3.00

Section

No. of Teeth

Sleeve Width (mm)

801 3M 804 3M 810 3M 813 3M 822 3M 843 3M 885 3M 909 3M 915 3M 939 3M 945 3M 969 3M 1026 3M 1050 3M 1125 3M 1176 3M 1209 3M 1215 3M 1245 3M 1263 3M 1335 3M 1344 3M 1401 3M 1494 3M 1521 3M 1530 3M 1569 3M 1587 3M 1800 3M 1863 3M 1884 3M 1950 3M 2160 3M 2277 3M 2388 3M 2640 3M 3000 3M 3210 3M 3390 3M 3600 3M 6804 3M

267 268 270 271 274 281 295 303 305 313 315 323 342 350 375 392 403 405 415 421 445 448 467 483 507 510 523 529 600 621 628 650 720 759 796 880 1000 1070 1130 1200 2268

450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.17

2.40

STD Timing / Synchronous Belts Section: S3M Standard: ISO 13050 / PIX Standard

PIX- X’act

Features : • Curvilinear tooth profile • Reduced tooth jump • High efficiency • Increased power transmission capacity • No high tension is required • Temp. range: -25°C to +100°C

S3M

_L 2.20

,_L 1.14 3.00

Mfg. range 120 S3M to 6510 S3M

Section

Pitch (mm)

S3M

3.00

Section

No. of Teeth

Sleeve Width (mm)

237 S3M 246 S3M 252 S3M 255 S3M 264 S3M 267 S3M 276 S3M 282 S3M 285 S3M 288 S3M 291 S3M 294 S3M 297 S3M 300 S3M 306 S3M 312 S3M 318 S3M 321 S3M 327 S3M 330 S3M 333 S3M 336 S3M 339 S3M 345 S3M 351 S3M 354 S3M 357 S3M 360 S3M 363 S3M 369 S3M 384 S3M 396 S3M 405 S3M 408 S3M 417 S3M 420 S3M 432 S3M 447 S3M 453 S3M 459 S3M 465 S3M 468 S3M 486 S3M 492 S3M 495 S3M 501 S3M 504 S3M 507 S3M 528 S3M 537 S3M 543 S3M 564 S3M 573 S3M 597 S3M 606 S3M 612 S3M 621 S3M 633 S3M 651 S3M

79 82 84 85 88 89 92 94 95 96 97 98 99 100 102 104 106 107 109 110 111 112 113 115 117 118 119 120 121 123 128 132 135 136 139 140 144 149 151 153 155 156 162 164 165 167 168 169 176 179 181 188 191 199 202 204 207 211 217

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Weight per metre/sleeve (Kgs) 1.096

Tooth Height (mm) Belt Thickness (mm) 1.14

2.20

STD Timing / Synchronous Belts Section: S3M Standard: ISO 13050 / PIX Standard

PIX- X’act

Features : • Curvilinear tooth profile • Reduced tooth jump • High efficiency • Increased power transmission capacity • No high tension is required • Temp. range: -25°C to +100°C

S3M

_L 2.20

,_L 1.14 3.00

Mfg. range 120 S3M to 6510 S3M

Section

Pitch (mm)

S3M

3.00

Section

No. of Teeth

Sleeve Width (mm)

657 S3M 666 S3M 690 S3M 699 S3M 741 S3M 750 S3M 765 S3M 774 S3M 789 S3M 804 S3M 810 S3M 894 S3M 1050 S3M 1125 S3M 1260 S3M 1422 S3M 1596 S3M 4395 S3M 4704 S3M 6510 S3M

219 222 230 233 247 240 255 258 263 268 270 298 350 375 420 474 532 1465 1568 2170

450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Weight per metre/sleeve (Kgs) 1.096

Tooth Height (mm) Belt Thickness (mm) 1.14

2.20

TorquePlus®-XT2 High Power Belts

14 M 4 1 m 2100 4M 14 1 uePlus-XT2 2100

Features:Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts • Synchronous power transmission • Higher angular speed, resistance to loads and low noise • Increased operational efficiency up to 98% • Temperature resistance up to 100°C • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563 Temperature range: -25°C to +100°C Product range: 5M, 8M, 14M, S5M, S8M sections Application: • Food processing • Packaging, paper machines • Printing machines • Robotic equipment • Conveyors • Office equipment • Medical equipment

PIX- TorquePlus -XT2 HTD Timing / Synchronous Belts ®

Section: 5M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: 5M

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts • Synchronous power transmission 3.80 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

Mfg. range Weight per metre/sleeve (Kgs) 225 5M to 2250 5M 1.893

2.06 5.00

Section

Pitch (mm)

5.00

Section

No. of Teeth

Sleeve Width (mm)

TP-225 5M TP-255 5M TP-265 5M TP-270 5M TP-280 5M TP-295 5M TP-300 5M TP-305 5M TP-320 5M TP-325 5M TP-330 5M TP-340 5M TP-345 5M TP-350 5M TP-360 5M TP-370 5M TP-375 5M TP-385 5M TP-390 5M TP-400 5M TP-420 5M TP-425 5M TP-450 5M TP-460 5M TP-475 5M TP-480 5M TP-500 5M TP-525 5M TP-535 5M TP-540 5M TP-550 5M TP-560 5M TP-565 5M TP-575 5M TP-580 5M TP-590 5M TP-600 5M TP-610 5M TP-615 5M TP-620 5M TP-625 5M TP-635 5M TP-640 5M TP-645 5M TP-650 5M TP-665 5M TP-670 5M TP-675 5M TP-700 5M TP-710 5M TP-720 5M TP-740 5M TP-750 5M TP-755 5M TP-760 5M TP-800 5M TP-810 5M

45 51 53 54 56 59 60 61 64 65 66 68 69 70 72 74 75 77 78 80 84 85 90 92 95 96 100 105 107 108 110 112 113 115 116 118 120 122 123 124 125 127 128 129 130 133 134 135 140 142 144 148 150 151 150 160 162

465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 2.06

3.80

PIX- TorquePlus -XT2 HTD Timing / Synchronous Belts ®

Section: 5M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: 5M

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts -L • Synchronous power transmission 3.80 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

Mfg. range Weight per metre/sleeve (Kgs) 225 5M to 2250 5M 1.893

2.06

5.00

Section

Pitch (mm)

5.00

Section

No. of Teeth

Sleeve Width (mm)

TP-835 5M TP-850 5M TP-860 5M TP-870 5M TP-890 5M TP-895 5M TP-900 5M TP-925 5M TP-935 5M TP-940 5M TP-950 5M TP-965 5M TP-980 5M TP-1000 5M TP-1025 5M TP-1050 5M TP-1100 5M TP-1125 5M TP-1135 5M TP-1145 5M TP-1175 5M TP-1200 5M TP-1270 5M TP-1350 5M TP-1400 5M TP-1420 5M TP-1500 5M TP-1530 5M TP-1595 5M TP-1790 5M TP-1800 5M TP-1870 5M TP-1895 5M TP-2000 5M TP-2100 5M TP-2250 5M

167 170 172 174 178 179 180 185 187 188 190 193 196 200 205 210 220 225 227 229 235 240 254 270 280 284 300 306 319 358 360 374 379 400 420 450

465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 2.06

3.80

PIX- TorquePlus -XT2 HTD Timing / Synchronous Belts ®

Section: 8M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: 8M

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts • Synchronous power transmission 6.00 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

-L

Mfg. range Weight per metre/sleeve (Kgs) 288 8M to 4400 8M 2.722

3.48 8.00

Section

Pitch (mm)

8.00

Section

No. of Teeth

Sleeve Width (mm)

TP-288 8M TP-320 8M TP-344 8M TP-352 8M TP-368 8M TP-376 8M TP-384 8M TP-416 8M TP-424 8M TP-480 8M TP-512 8M TP-520 8M TP-544 8M TP-560 8M TP-576 8M TP-584 8M TP-600 8M TP-608 8M TP-624 8M TP-640 8M TP-656 8M TP-680 8M TP-696 8M TP-712 8M TP-720 8M TP-728 8M TP-760 8M TP-776 8M TP-784 8M TP-800 8M TP-816 8M TP-840 8M TP-848 8M TP-856 8M TP-880 8M TP-896 8M TP-912 8M TP-920 8M TP-960 8M TP-968 8M TP-976 8M TP-1000 8M TP-1040 8M TP-1056 8M TP-1064 8M TP-1080 8M TP-1096 8M TP-1104 8M TP-1120 8M TP-1136 8M TP-1152 8M TP-1160 8M TP-1168 8M TP-1200 8M TP-1224 8M TP-1240 8M TP-1256 8M

36 40 43 44 46 47 48 52 53 60 64 65 68 70 72 73 75 76 78 80 82 85 87 89 90 91 95 97 98 100 102 105 106 107 110 112 114 115 120 121 122 125 130 132 133 135 137 138 140 142 144 145 146 150 153 155 157

460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 3.48

PIX- TorquePlus -XT2 HTD Timing / Synchronous Belts ®

Section: 8M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: 8M

Mfg. range Weight per metre/sleeve (Kgs) 288 8M to 4400 8M 2.722

3.48 8.00

Section

Pitch (mm)

8.00

Section

No. of Teeth

Sleeve Width (mm)

TP-1280 8M TP-1304 8M TP-1328 8M TP-1352 8M TP-1360 8M TP-1392 8M TP-1400 8M TP-1424 8M TP-1440 8M TP-1480 8M TP-1520 8M TP-1552 8M TP-1584 8M TP-1600 8M TP-1640 8M TP-1680 8M TP-1696 8M TP-1728 8M TP-1760 8M TP-1784 8M TP-1800 8M TP-1880 8M TP-1896 8M TP-1904 8M TP-2000 8M TP-2080 8M TP-2104 8M TP-2160 8M TP-2240 8M TP-2248 8M TP-2272 8M TP-2400 8M TP-2504 8M TP-2600 8M TP-2800 8M TP-3008 8M TP-3048 8M TP-3120 8M TP-3200 8M TP-3280 8M TP-3600 8M TP-4400 8M

160 163 166 169 170 174 175 178 180 185 190 194 198 200 205 210 212 216 220 223 225 235 237 238 250 260 263 270 280 281 284 300 313 325 350 376 381 390 400 410 450 550

460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 3.48

PIX- TorquePlus -XT2 HTD Timing / Synchronous Belts ®

Section: 14M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: 14M

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts • Synchronous power transmission 10.0 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

Mfg. range Weight per metre/sleeve (Kgs) 966 14M to 3850 14M 4.635

6.02 14.00

Section

Pitch (mm)

14M

14.00

Section

No. of Teeth

Sleeve Width (mm)

TP-966 14M TP-1036 14M TP-1064 14M TP-1092 14M TP-1120 14M TP-1190 14M TP-1260 14M TP-1288 14M TP-1344 14M TP-1400 14M TP-1456 14M TP-1512 14M TP-1540 14M TP-1610 14M TP-1750 14M TP-1764 14M TP-1778 14M TP-1820 14M TP-1890 14M TP-1904 14M TP-1960 14M TP-2100 14M TP-2240 14M TP-2310 14M TP-2450 14M TP-2590 14M TP-2730 14M TP-2800 14M TP-3150 14M TP-3360 14M TP-3500 14M TP-3850 14M TP-4326 14M TP-4578 14M

69 74 76 78 80 85 90 92 96 100 104 108 110 115 125 126 127 130 135 136 140 150 160 165 175 185 195 200 225 240 250 275 309 327

420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420 420

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 6.02

10.0

-XT2 STD Timing / Synchronous Belts Section: S5M Standard: ISO 13050 / PIX Standard

PIX- TorquePlus

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts i • Synchronous power transmission 3.40 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

TorquePlus-XT2: S5M ,-L

Mfg. range Weight per metre/sleeve (Kgs) 325 S5M to 3200 S5M 1.618

1.91 5.00

Section

Pitch (mm)

S5M

5.00

Section

No. of Teeth

Sleeve Width (mm)

TP-325 S5M TP-350 S5M TP-375 S5M TP-390 S5M TP-400 S5M TP-420 S5M TP-450 S5M TP-490 S5M TP-500 S5M TP-520 S5M TP-525 S5M TP-550 S5M TP-560 S5M TP-575 S5M TP-600 S5M TP-625 S5M TP-650 S5M TP-665 S5M TP-675 S5M TP-710 S5M TP-720 S5M TP-725 S5M TP-740 S5M TP-750 S5M TP-800 S5M TP-810 S5M TP-830 S5M TP-850 S5M TP-890 S5M TP-900 S5M TP-1000 S5M TP-1050 S5M TP-1125 S5M TP-1195 S5M TP-1225 S5M TP-1270 S5M TP-1350 S5M TP-2000 S5M TP-2525 S5M

65 70 75 78 80 84 90 98 100 104 105 110 112 115 120 125 130 133 135 142 144 145 148 150 160 162 166 170 178 180 200 210 225 239 245 254 270 400 505

465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465 465

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 1.91

3.40

-XT2 STD Timing / Synchronous Belts Section: S8M Standard: ISO 13050 / PIX Standard

PIX- TorquePlus

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts 1 • Synchronous power transmission 5.30 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

TorquePlus-XT2: S8M ,-L

Mfg. range 376 S8M to 3200 S8M

Weight per metre/sleeve (Kgs) 2.465

3.05 8.00

Section

Pitch (mm)

S8M

8.00

Section

No. of Teeth

Sleeve Width (mm)

TP- 376 S8M TP- 440 S8M TP- 480 S8M TP- 512 S8M TP- 520 S8M TP- 560 S8M TP- 584 S8M TP- 600 S8M TP- 632 S8M TP- 640 S8M TP- 656 S8M TP- 680 S8M TP- 712 S8M TP- 720 S8M TP- 728 S8M TP- 760 S8M TP- 800 S8M TP- 824 S8M TP- 840 S8M TP- 848 S8M TP- 856 S8M TP- 880 S8M TP- 896 S8M TP- 920 S8M TP- 944 S8M TP- 960 S8M TP- 976 S8M TP- 984 S8M TP- 1000 S8M TP- 1032 S8M TP- 1040 S8M TP- 1056 S8M TP- 1072 S8M TP- 1080 S8M TP- 1096 S8M TP- 1120 S8M TP- 1136 S8M TP- 1152 S8M TP- 1160 S8M TP- 1184 S8M TP- 1192 S8M TP- 1200 S8M TP- 1216 S8M TP- 1224 S8M TP- 1240 S8M TP- 1248 S8M TP- 1256 S8M TP- 1264 S8M TP- 1280 S8M TP- 1304 S8M TP- 1312 S8M TP- 1320 S8M TP- 1344 S8M TP- 1352 S8M TP- 1360 S8M TP- 1400 S8M TP- 1424 S8M

47 55 60 64 65 70 73 75 79 80 82 85 89 90 91 95 100 103 105 106 107 110 112 115 118 120 122 123 125 129 130 132 134 135 137 140 142 144 145 148 149 150 152 153 155 156 157 158 160 163 164 165 168 169 170 175 178

• Standard Designation for Timing Belts: Refer page no.90 • Minimum order quantity: 01 sleeve

Tooth Height (mm) Belt Thickness (mm) 3.05

5.30

PIX- TorquePlus -XT2 STD Timing / Synchronous Belts ®

Section: S8M Standard: ISO 13050 / PIX Standard

TorquePlus-XT2: S8M

Features: • 50% to 70% enhancement in power-rating over PIX-X'act® HTD/STD Belts • Synchronous power transmission 5.30 • Increased operational efficiency up to 98% T • Temperature resistance up to 100°C • Higher angular speed, resistance to loads and low noise • Optimum operational efficiency and augmented Belt life • Lower operational cost • Antistatic properties as required by ISO 9563

Mfg. range 376 S8M to 3200 S8M

Weight per metre/sleeve (Kgs) 2.465

3.05 8.00

Section

Pitch (mm)

S8M

8.00

Section

No. of Teeth

Sleeve Width (mm)

TP- 1440 S8M TP- 1480 S8M TP- 1512 S8M TP- 1520 S8M TP- 1552 S8M TP- 1600 S8M TP- 1680 S8M TP- 1696 S8M TP- 1728 S8M TP- 1760 S8M TP- 1776 S8M TP- 1800 S8M TP- 1912 S8M TP- 2000 S8M TP- 2024 S8M TP- 2032 S8M TP- 2048 S8M TP- 2120 S8M TP- 2240 S8M TP- 2272 S8M TP- 2400 S8M TP- 2496 S8M TP- 2552 S8M TP- 2600 S8M TP- 2800 S8M TP- 2848 S8M TP- 3200 S8M

180 185 189 190 194 200 210 212 216 220 222 225 239 250 253 254 256 265 280 284 300 312 319 325 350 356 400

460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460

Tooth Height (mm) Belt Thickness (mm) 3.05

5.30

Standard Designation:

STD section STD 150 S 5M 650

Classical section 270 XL 025 270

025

Pitch Length 27”

Section (Tooth pitch 5.080 mm)

Belt Width 0.25”

STD 150

S 5M

Belt Section Top Width (Tooth pitch 15 mm 5.0 mm)

• Minimum order quantity: 01 sleeve

HTD section 800 8M 30 650

800

Pitch Length 650 mm

Pitch Length 800 mm

Section (Tooth pitch 8.0 mm)

Belt Width 30 mm

X’pedient®-XT Polyurethane Belts i >

£ ’3E

■JC

≤

≥

- isI I ftti F #///. ■

i'ÿPec/j

4 <

a-*’Lpeÿf-

assE £tf

3iE3?*l

. ji

f.-!

-ÿ

Features: • Polyurethane timing Belts are highly flexible with longitudinal toughness to ensure perfect tooth meshing • No dust-generation or flaking while running - clean Belt • Homogeneous throughout its cross-section by virtue of thermoset moulding process • Superior wear and abrasion resistance • High resistance to oil, fat and grease • Excellent resistance to ageing, hydrolysis, UV and ozone • Low vibration and reduced noise level • Good resistance to most acids and alkalis • Operating temperature range: -30°C to +80°C (up to +110°C for a short period) Application: Office automation equipment and vending machines, machine tools and pumps, textile machines, paper making machines and printing machinery, medical equipment, optical instruments, food processing equipment, packaging machinery, robotics and plotters.

-XT Polyurethane Endless Belts T5 Section (Steel cord) Standard: PIX Standard / DIN 7721 ®

T5 (Steel cord)

Features: • Tensile Strength of Steel :- 360,000 lbs/in2

Mfg. range Weight Weightper permetre metre(Kgs) (Kgs) T5-120 to T5-1955 --

Section Pitch (mm)

• Steel are used where high corrosion resistance is required. They are suitable for application in aggressive environments.

5.00

Tooth Height ‘B’

Belt Thickness ‘C’

1.20(mm)

2.20 (mm)

L-l

C 2.20

5.0

• Bending modulus is a measurement of the tensile resistances to bend. This value not very high in steel.

1.20 B

PIX- X’pedient

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

T5-120 T5-150 T5-165 T5-170 T5-180 T5-185 T5-190 T5-200 T5-210 T5-215 T5-220 T5-225 T5-240 T5-245 T5-250 T5-255 T5-260 T5-270 T5-275 T5-280 T5-285 T5-295 T5-300 T5-305 T5-315 T5-320 T5-325 T5-330 T5-335 T5-340 T5-345 T5-350 T5-355 T5-360 T5-365 T5-370 T5-375 T5-380 T5-390 T5-400 T5-410 T5-415 T5-420 T5-425 T5-430 T5-435 T5-440

24 30 33 34 36 37 38 40 42 43 44 45 48 49 50 51 52 54 55 56 57 59 60 61 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 80 82 83 84 85 86 87 88

120 150 165 170 180 185 190 200 210 215 220 225 240 245 250 255 260 270 275 280 285 295 300 305 315 320 325 330 335 340 345 350 355 360 365 370 375 380 390 400 410 415 420 425 430 435 440

T5-445 T5-450 T5-455 T5-460 T5-465 T5-470 T5-475 T5-480 T5-490 T5-500 T5-505 T5-510 T5-515 T5-525 T5-530 T5-545 T5-550 T5-560 T5-575 T5-590 T5-600 T5-605 T5-610 T5-615 T5-620 T5-625 T5-630 T5-635 T5-640 T5-645 T5-650 T5-655 T5-660 T5-670 T5-675 T5-685 T5-690 T5-695 T5-700 T5-710 T5-720 T5-725 T5-740 T5-750 T5-765 T5-770 T5-775

89 90 91 92 93 94 95 96 98 100 101 102 103 105 106 109 110 112 115 118 120 121 122 123 124 125 126 127 128 129 130 131 132 134 135 137 138 139 140 142 144 145 148 150 153 154 155

445 450 455 460 465 470 475 480 490 500 505 510 515 525 530 545 550 560 575 590 600 605 610 615 620 625 630 635 640 645 650 655 660 670 675 685 690 695 700 710 720 725 740 750 765 770 775

T5-780 T5-800 T5-810 T5-815 T5-825 T5-830 T5-840 T5-850 T5-860 T5-870 T5-885 T5-900 T5-915 T5-920 T5-925 T5-940 T5-950 T5-960 T5-975 T5-990 T5-1000 T5-1020 T5-1045 T5-1075 T5-1090 T5-1100 T5-1115 T5-1140 T5-1150 T5-1160 T5-1200 T5-1215 T5-1220 T5-1275 T5-1280 T5-1315 T5-1350 T5-1355 T5-1380 T5-1400 T5-1440 T5-1500 T5-1520 T5-1580 T5-1900 T5-1905 T5-1955

156 160 162 163 165 166 168 170 172 174 177 180 183 184 185 188 190 192 195 198 200 204 209 215 218 220 223 228 230 232 240 243 244 255 256 263 270 271 276 280 288 300 304 316 380 381 391

780 800 810 815 825 830 840 850 860 870 885 900 915 920 925 940 950 960 975 990 1000 1020 1045 1075 1090 1100 1115 1140 1150 1160 1200 1215 1220 1275 1280 1315 1350 1355 1380 1400 1440 1500 1520 1580 1900 1905 1955

• Non standard stock items are available on request • Minimum order quantity: 01 sleeve (sleeve width: 150mm)

-XT Polyurethane Endless Belts T5 Section (Kevlar cord) Standard: PIX Standard / DIN 7721 ®

T5 (Kevlar cord) Mfg. range Weight Weightper permetre metre(Kgs) (Kgs) T5-120 to T5-1955 --

Section Pitch (mm)

5.00

Tooth Height ‘B’

Belt Thickness ‘C’

1.20(mm)

2.20 (mm)

5.0

C 2.20

Features: • Tensile Strength of Kevlar :- 400,000 lbs/in2 • Aramid (kevlar) tension cords are used where non-magnetic drives are requested. It increases belt flexibility and decreases belt weight. • "Bending modulus is a measurement of the tensile resistance to bend. Kevlar bends far more easily than other cord. Since the primary mode of belt failure is through flex fatigue, bending modulus is important. Kevlar has the distinct advantage over other.” • Kevlar also has the advantage in the area of fretting corrosion - corrosion occurring at the interface of two contacting surfaces as they rub against each other. While this action is normal to all belts, Kevlar resists fretting corrosion far better than other • Kevlar tension cords are less sensitive to impact loads and are consequently primarily applied in drives exposed to impactloads. • The bending flexibility of aramid cord is high so that very small timing belt pulley diameters are possible.

1.20 B

PIX- X’pedient

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

24 30 33 34 36 37 38 40 42 43 44 45 48 49 50 51 52 54 55 56 57 59 60 61 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 80 82 83 84 85 86 87 88

120 150 165 170 180 185 190 200 210 215 220 225 240 245 250 255 260 270 275 280 285 295 300 305 315 320 325 330 335 340 345 350 355 360 365 370 375 380 390 400 410 415 420 425 430 435 440

89 90 91 92 93 94 95 96 98 100 101 102 103 105 106 109 110 112 115 118 120 121 122 123 124 125 126 127 128 129 130 131 132 134 135 137 138 139 140 142 144 145 148 150 153 154 155

445 450 455 460 465 470 475 480 490 500 505 510 515 525 530 545 550 560 575 590 600 605 610 615 620 625 630 635 640 645 650 655 660 670 675 685 690 695 700 710 720 725 740 750 765 770 775

156 160 162 163 165 166 168 170 172 174 177 180 183 184 185 188 190 192 195 198 200 204 209 215 218 220 223 228 230 232 240 243 244 255 256 263 270 271 276 280 288 300 304 316 380 381 391

• Non standard stock items are available on request • Minimum order quantity: 01 sleeve (sleeve width: 150mm)

-XT Polyurethane Endless Belts AT5 Section (Steel cord) Standard: PIX Standard / DIN 7721 ®

AT5 (Steel cord)

Features: • Tensile Strength of Steel :- 360,000 lbs/in2

Mfg. range Weight per metre (Kgs) AT5-225 to AT5-2000 -

• Steel are used where high corrosion resistance is required. They are suitable for application in aggressive environments.

Section

Pitch (mm)

Tooth Height ‘B’

Belt Thickness ‘C’

AT5

5.00

1.20(mm) 5.0

2.70 (mm)

• Bending modulus is a measurement of the tensile resistances to bend. This value not very high in steel.

C 2.70

PIX- X’pedient

1.20 B

-il

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

Belt Reference

No. of Teeth

Pitch Length (mm)

AT5-225 AT5-255 AT5-275 AT5-280 AT5-300 AT5-330 AT5-335 AT5-340 AT5-375 AT5-390 AT5-420 AT5-450 AT5-455 AT5-480 AT5-490 AT5-500

45 51 55 56 60 66 67 68 75 78 84 90 91 96 98 100

225 255 275 280 300 330 335 340 375 390 420 450 455 480 490 500

AT5-525 AT5-545 AT5-600 AT5-610 AT5-620 AT5-630 AT5-660 AT5-665 AT5-670 AT5-695 AT5-710 AT5-720 AT5-750 AT5-780 AT5-825 AT5-860

105 109 120 122 124 126 132 133 134 139 142 144 150 156 165 172

525 545 600 610 620 630 660 665 670 695 710 720 750 780 825 860

AT5-890 AT5-900 AT5-950 AT5-975 AT5-1050 AT5-1075 AT5-1100 AT5-1125 AT5-1215 AT5-1240 AT5-1260 AT5-1380 AT5-1500 AT5-1520 AT5-1750 AT5-2000

178 180 190 195 210 215 220 225 243 248 252 276 300 304 350 400

890 900 950 975 1050 1075 1100 1125 1215 1240 1260 1380 1500 1520 1750 2000

• Non standard stock items are available on request • Minimum order quantity: 01 sleeve (sleeve width: 150mm)

PIX- X’pedient -XT Polyurethane Endless Belts ®

AT5 Section (Kevlar cord) Standard: PIX Standard / DIN 7721

AT5 (Kevlar cord) Mfg. range Weight per metre (Kgs) AT5-225 to AT5-2000 -

Pitch (mm)

Tooth Height ‘B’

Belt Thickness ‘C’

AT5

5.00

1.20(mm)

2.70 (mm)

5.0 r_._7j