SK 2013

Page 1

Product and Price Catalogue 2013 速

SONNENKRAFT

Solar energy for hot water and heating z

cover 100% of your heating and hot water demand with a sol+ solution

once installed heating FROM SUN AND AIR is for free

High european quality, low maintenance

f

y

c

www.sonnenkraft.co.uk


d

k

solar energy SOLUTIONS FOR HOT WATER and HEATING v

Every day the sun releases an enormous amount of energy - 100% clean and 100% free of charge. For hot water and room heating, no足thing comes close to a solar thermal solution. In a solar thermal solution the heat is used directly instead of being transferred to another energy type. This minimises the energy losses and results in an increasedb efficiency in comparison to any other heating solution.

g

2

Environment

e Economy

Independency

Solar energy generates no pollution; it is efficient and makes no noise. Solar energy avoids the exploitation of nature and helps saving our planet!

Once installed, the energy you get from a solar solution is free. The more the prices of oil and gas will increase over time, the bigger the savings.

An efficient solar energy solution will give you the opportunity to gain independency from the traditional energy supplier, and help keep energy costs at a low level.


Solar energy solutions Our values create value for you The tools to sell solar solutions New: The Sol+ solution

2 4 6 8

Intro

Introduction

Page

2-9 Set solutions COMPACT E 14 COMPACT Plus 16 COMFORT E 20 COMFORT E Plus 22 Sol+ 26

Page

10-28

Large scale COMFORT E PLus XL COMFORT E XL

30 32 Page

29-33 Collectors SKR500 35 SK500-ECO-AL 38 SK400-AL 40 IDMK-AL 42 GK-HP 44

a

Page

34-45

Tanks ELB 47 DHW/ELB 48 PSR-E 49 PSC-E 50 PS-E 51 Tank and module overview 52

Page

46-53

Modules

High potential savings with hot water and room heating

RLGHE, PSKR18HE 55 FWM15i/30i 56 FWM30i cascade, FWM150/225 57 SLM50HE, SLM120/200 58 HKM20HE, RAS20 59 Additional pumping station 60

Page

54-60

Accessories HOT WATER

ELECTRICITY

Control units 61 Heat exchangers 62 Solar circuit 63 Accessories components 64

Page

61-65

ROOM HEATING

Solar Electricity COMPACT POWER 68 Black Pearl 245 WP 70 In general 2/3 of a household’s energy costs come from hot water and heating, and fortunately solar thermal solutions are the most efficient solutions for hot water and heating and offers high potential savings.

Page

66-71 Service Notes Terms and conditions

Prices valid from January 1st 2012, all other pricelists lose validity from this date. Price in GBP excluding VAT. Prices subject to change (prices without indication of quantity are prices per piece). Subject to technical changes! Figures and illustrations used as examples. Formatting and printing errors might occur. Range of products is not binding. 2013 prices – all prices are indicated in GBP excluding VAT

72 74 Page

72-753


g

e

OUr values create value for you

z

At SONNENKRAFT we have spent the past two decades making nothing but solar solutions. This focus has made us one of Europe's leading developers of solar solutions, delivering installations to both the private and the professional market. SONNENKRAFT is a part of SolarCAP, which has ownership of solar companies all over the world.

4

f


Intro Everything we do complies with our core values: Easy, Efficient and Extra. We want to make solar energy a natural part of every building. Every time we see a roof top, we see business opportunities. We want to explore these opportunities with you.

FRONTRUNNER By January 1. 2015 new legislation require all pumps to be high efficiency pumps. All of SONNENKRAFT's pumps already comply with this, so if you want to reduce the energy demand by up to 80%, why wait until 2015.

Complete y

By delivering all necessary components of a solar energy installation, SONNENKRAFT ensures that every parts fits together perfectly, which increases the efficiency of our solutions.

Efficient The efficiency of an installation does not only depend on one product’s ability to perform. SONNENKRAFT ensures that every component of an installation is working together to obtain optimum effect.

Streamlined At SONNENKRAFT we have streamlined our product range to make it even easier for our partners to analyse their customer needs and to order from us.

EASY At SONNENKRAFT our main focus is to be able to comply with the demands of the market. A market driven approach to our products is important, and that's why we always listen to the customer's demands.

Uncomplicated The products from SONNENKRAFT are easy to order, install and maintain. That means less hours working and more money earned.

Extra At SONNENKRAFT we always strive to add something extra to create more value for the customers.

g

State of the art The strict and efficient control of each and every component leaving the European production plants ensures that we always deliver high quality.

2013 prices – all prices are indicated in GBP excluding VAT

m

Award winning The product development of SONNENKRAFT has been acknowledged through receiving two prestigious Plus X Awards. The award distinguishes products that are innovative and viable for the future and possess at least one “Plus X” factor.

5


The tools to sell solar solutions At SONNENKRAFT we want to be the best possible business partner for you. The more we understand the needs of your customers and the challenges in the sales situation, the better we are able to help you.

Become a SONNENKRAFT Partner The best way to make business together is to become partners. Our Partner Programme offers many benefits for you, such as extensive training support and close collaboration in local campaigns and events. Contact your SONNENKRAFT sales representative to learn more about our partner conditions.

Together with SONNENKRAFT, you can very easily offer the best tailor-made solution for every individual need. This is the best guarantee we – and you – can offer the consumer.

z

g Solar academy

Become a SoNNeNKRaFT® paRTNeR Training daTeS module 1

module 2

module 3

module 4

d

YouR RewaRd iS waiTiNg FoR You module 5

k

knowledge increaSeS your earningS

Fi M

DU

LE

nc

4

e

Inst

a ll

at

MO

DU

How to give consumers advice that sells (how to uncover needs and suggest the optimal solution to the consumer, planning of the project and dimensioning of y the system)

module 2 What you should know about SONNENKRAFT® product solutions (technical data, how it works, when to sell which solution)

n

SONNENKRAFT™ SOLAR CIRCLE

na

O

v

module 1

io

The more you know, the more you can sell.

e

d z

Advice ts oduc Pr

Please contact the SONNENKRAFT office for exact timetables, etc. Because as we say:

Solar academy moduleS

MODULE 1

E2 DUL MO

To effectively sell solar solutions and achieve happy consumers, you and your team must have a deep know-ledge of all aspects of a strong solar solution. With our Solar Academy, SONNENKRAFT® takes responsibility for offering you training in each of the five parts of the SONNENKRAFT Solar Circle. Participation in the training will enable you to sell more to the consumers.

g

3

b

MODU LE 5

a

Servi ce

v

LE

module 4 module 3 How to make the perfect installation (planning, security, time estimate)

Subsidies and financing are important parts of the total solution. The possibilities vary from country to country. Ask us which advice, documentation and certificates can be provided in your country.

g module 5 Service as a tool to get satisfied consumers and added sales (yearly checks, warranty, how to contact existing consumers)

6

Benefit from the SonnenKrAft® PArtner ProgrAm 2013

7

www.sonnenkraft.com

6 m

z

a


Intro

y

increase SALES WITH OUR STRONG consumer MARKETING PACKAGE

receive Consumer leads direct in your mailbox

The consumer catalogue is your guide to use when talking to the consumer. The icons and the colour codes make it easy to find and present the relevant solutions. This will ensure that the dialogue pro­gresses quickly towards a sale without any risk of confusion and misunderstanding. Together with the consumer, you will find the best solution.

One of the most popular features on our website is the solar calculator. The calculator recommends a suitable solution and calculates its specific benefits. It m generates leads of potential consumers, that want to learn more about solar solutions and get an offer. We can make sure, that you get information about these valuable sales opportunities directly in your mailbox. For partners we offer an advanced version of the solar calculator on the login area on our website making it easy to do the calculation of the installation and more importantly, showing the end-users great improvement potential.

Product Catalogue 2013

SonnenKraft®

Solar energy for hot water and heating cover 100% of your heating and hot water demand with a Sol+ Solution

once inStalled heating from Sun and air iS for free

high european quality, low maintenance

www.sonnenkraft.com

2013 prices – all prices are indicated in GBP excluding VAT

7


z

f

NEW: the Sol+ solution with heat pump

y

c

p Utilising the RENEWABLE POWER OF NATURE Sometimes you need just a little effort to accomplish great results. When our technicians had the idea to combine a solar hot water and heating solution with a heat pump it already seemed a really good idea. But as the development of the project progressed it became clear to everyone that we were about to accomplish something quite unique.

8


Intro

Best in class

g

Reduced energy demand

The brand new Heat Pump HP12M offers the highest efficiency in its class, with a COP of 4,02. This means that the heat pump delivers more than 4 heating output units, for each electricity input unit.

The full modul­ating pump reduces energy demand by up to 20%, because it adapts its operating “speed”. This compared to stand-ard heat pumps which run “full speed” and stop when delivering more heat than necessary.

Easy operation Easy system control, due to a touch screen with LAN interface which allows remote control and even automatic service monitoring if wanted.

m

u

The Sol+ solution Not only are you now able to offer your customers the most efficient heating solution. Now they can finally get all their heating without the need of an oil burner, gas boiler or any other auxiliary heating system. They will never have to worry about price increases on fossil fuels again.

2013 prices – all prices are indicated in GBP excluding VAT

Solar hot water and heating

Heat pump

The energy generated from the collectors is used first because it is the most effective way of generating hot water and room heating, and it's for free!

When necessary the heat pump delivers the rest of the energy needed: generating up to 4 heating outputs for each electrical energy input.

9


10


Solutions Page

Solar hot water 12-17

Solar hot water Page Solar room heating 18-23

Solar hot water Solar room heating Page Solar heat pump 24-28

2013 prices – all prices are indicated in GBP excluding VAT

11


what it does The Solar Hot Water solutions from SONNENKRAFT use the energy of the sun to heat up water needed for domestic hot water, for instance in the kitchen or bathroom.

How it works The sun heats up the liquid in the solar panels on the roof. The heat from the solar liquid is transferred to the water in the hot water tank and thereby domestic hot water is produced.

THE Improvement economic SONNENKRAFT´s hot water solutions make a household much more energy efficient, which will save money every day. The solutions improve the energy rating of the home and the costs can be offset by an increase in its value.

Environmental Combustion of oil and gas fossil fuel is considered to be the largest contributing factor to the release of greenhouse gases into the atmosphere. That is why governments in almost every country have set up aggressive goals to reduce carbon dioxide emission. Using solar energy emits zero carbon dioxide.

Independency Oil and gas are scarce resources that will run out of over time. The future price is highly uncertain. During the last 10 years the oil price has increased by 300 %. Using as much solar energy as possible reduces the user's dependency on other energy sources, and so removes the worry about increasing fossil fuel prices and future scarce supply.

12


Solutions

solar hot water Benefits • Produce up to 70 % of your hot water for free • The HE pump of the COMPACT PLUS system requires 80% less energy than standard pumps • Quick and easy installation • Low maintenance • Premium SONNENKRAFT Quality • Two different solutions available

the solutions Compact Plus The SONNENKRAFT COMPACT PLUS is an easily installed hot water tank and is provided with tested components and proven technology to ensure durability and efficiency

THERMOSYPHON TS-E Thermosyphon solutions are the most basic of all solar hot water solutions, combining solar collector and domestic hot water tank in one outdoor unit. So the Thermosyphon TS-E works based on natural convection, which circulates liquid without the necessity of a mechanical pump.

HIGH EFFICIENCY

A

Thermosyphon TS-E

COMPACT PLUS

2013 prices – all prices are indicated in GBP excluding VAT

13


solar hot water

Compact PLUS It doesn’t have to be expensive to become energy efficient. SONNENKRAFT offers you the easiest solution to utilise solar energy in residential housing. COMPACT PLUS can cover up to 75% of a household's total hot water demand. It is your guarantee for a solution in premium European quality that ensures long lasting energy supply and a positive environmental impact.

Functional diagram COMPACT PLUS Hot water

or ct

le

l Co

Backup heater

Hot water tank

Pumping station Cold water

14

HIGH EFFICIENCY PUMP

Easy installation

The pump station PSKRHE now comes with a high efficiency pump, which requires 80% less energy to run a solar system than standard pumps of this type.

Easy to set up and install due to “Plug & Flow” installation of solar pumping station. Thanks to the slim design, the COMPACT PLUS takes up very little space.


200 L

300 L

400 L

750 L

750 L

1000 L

Persons (Middle/North Europe)

Pers.

1-3

2-4

3-6

5-8

8 - 12

12 - 20

Persons (Southern Europe/Middle East/Africa)

Pers.

1-4

2-5

3-8

5-9

8 - 15

12 - 20

Number of collectors

Pcs

1

2

3

4

5

6

Collector surface area (SKR, SK-ECO-AL, IDMK-AL / SK400-AL)

m

2.5 / 2

5.1 / 4

7.5 / 6

10.1 / 8

12.5 / 10

15.1 / 12

SKR500 sets WITHOUT mounting/flashing

£

3,195.-

4,195.-

5,095.-

6.845.-

7,535.-

8,560.-

SKR500

Item no.

152 425

152 432

152 439

153 664

153 671

153 678

SKR500L

Item no.

152 426

152 433

152 440

153 665

153 672

153 679

SK400-AL sets WITHOUT mounting/flashing SK400N-AL SK500-ECO-AL sets WITHOUT mounting/flashing

2

£

3,125.-

3,995.-

4,895.-

6.435.-

7,020.-

7,945.-

Item no.

152 430

152 437

152 444

153 669

153 676

153 683

£

3,195.-

4,195.-

5,095.-

6.890.-

7,590.-

8,630.-

SK500N-ECO-AL

Item no.

152 427

152 434

152 441

153 666

153 673

153 680

SK500L-ECO-AL

Item no.

152 428

152 435

152 442

153 667

153 674

153 681

£

3,650.-

4,750.-

5,550.-

7.105.-

7,865.-

8,955.-

Item no.

152 429

152 436

152 443

153 668

153 675

153 682

£

3,195.-

4,195.-

5,095.-

6.705.-

7,360.-

8,350.-

Item no.

152 431

152 438

152 445

153 670

153 677

153 684

£

450.-

450.-

450.-

550.-

550.-

550.-

For SKR500

Item no.

141 590

141 590

141 590

141 591

141 591

141 591

For SK400N-AL

Item no.

141 524

141 524

141 524

141 526

141 526

141 526

For SK500-ECO-AL

Item no.

141 524

141 524

141 524

141 526

141 526

141 526

For IDMK-AL

Item no.

141 523

141 523

141 523

141 525

141 525

141 525

Type

ELB200 R2E-H-UK

ELB300 R2E-H-UK

ELB400 R2E-H-UK

DHW750R2

DHW750R2

DHW1000R2

SPECIAL COLLECTOR FOR COASTAL REGIONS and CORROSIVE ENVIRONMENT SK500N-ECO-AL-M IDMK-AL sets WITHOUT mounting/flashing IDMK25-AL

Solutions

Compact PLUS solutions

See page 36-37, 39, 41 and 43 for mounting systems Corrugated pipe connection set (DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector)

*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20 Set components COMPACT E tank Solar unvented tank kit, incl. hot water expan. tank

Type

SDHWK200

SDHWK300

SDHWK400

Pumping station and flow fitting with gravity brake

Type

PSKRHE

PSKRHE

PSKRHE

RLGHE *

RLGHE *

RLGHE *

2-circuit control unit, incl. 2 sensors

Type

SKSC2

SKSC2HE

SKSC2HE

SKSC2HE

SKSC2HE

SKSC2HE

Domestic water mixer

Type

TBM20

TBM20

TBM20

TBM25

TBM25

TBM25

Expansion tank incl. tank mounting or connection**

Type

AG18S

AG25S

AG25S

AG33S

AG33S

AG50S**

Antifreeze

l

15

15

20

20

20

25

SONNENKRAFT SERVICE

Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience *) RLGHE not pre-mounted, **) AGS floor mounting

control unit

reliable technology

A pre-configured and very user friendly control unit makes the COMPACT PLUS very easy to operate. It also requires minimal maintenance.

All components are of premium European quality, thoroughly tested and perfectly matched. We use only proven technology to ensure durability and efficiency

2013 prices – all prices are indicated in GBP excluding VAT

15


Solar hot water

Thermosyphon TS-E The improved SONNENKRAFT Thermosyphon system works using the force of gravity. The inexpensive system, consisting of a collector, double enamelled domestic hot water tank incl. magnesium anode and mounting system, is assembled on-site. It is an ideal solution for creating hot water in smaller households and warm climates.

Functional diagram THERMOSYPHON Hot water

Hot water tank

or ct

Cold water

le

l Co

16

COST EFFECTIVE AND EFFICIENT

EASY TO INSTALL

The Thermosyphon TS-E is a very easy and efficient solution to provide domestic hot water for various applications. In warm climates no electrical power supply is needed to run the systems.

The compact Thermosyphon TS-E system is very easy to connect to the cold and hot water mains.


Number of collectors

Pcs

Collector surface area

TS150E

TS200E

TS300E

1

1

2

m

2.1

2.1

4.2

Tank

l

150

200

300

System WITH mounting (parallel on pitched roof or 40° on flat roof)

£

on request

on request

on request

Item no.

152 675

152 676

152 677

1x TSC221-HS

1x TSC221-HS

1x TSC221-HS 1x TSC221-HSB

2045x1030x105

2045x1030x105

2x (2045x1030x105)

2

TS-E

Solutions

TS-E solutions

Note: for parallel installation on pitched roof the min. roof tilt = 25°, the max. roof tilt = 45° Set Components Collector high selective Gross Dimensions (WxHxD)

mm

Absorber area

m

1,93

1,93

2x1,93

Empty weight

kg

42,5

42,5

42,5+40,5

l

2,5

2,5

2,5+2

2

Capacity Absorber

Harp with absorber fins

Tank Capacity water / solar

TST150

TST200

TST300

l

150 / 5.5

200 / 8.5

300 / 13.5

Weight empty

kg

62,5

78

113

Max. water operating pressure

bar

6

6

6

Max. solar operating pressure

bar

3

3

3

Insulation thickness

mm

50

50

50

Coating hot water tank

enameled

Mounting set (0-40º) kg

Weight

MS-TS150/200

MS-TS150/200

MS-TS300

38,7

38,7

47

Corrosion protection

Powder coating

ACCESSORIES Solar safety valve

bar

DHW tank safety group

bar

3

3

3

6

6

6

4

4

4

l

5

5

10

Electrical heating 2kW EHP20-TS (152 670)

£

on request

on request

on request

Mg-Anode Ø22 x 500 mm MGA-TS (152 671)

£

on request

on request

on request

Over temperature safety valve 85 °C TSV-TS (152 672)

£

on request

on request

on request

Pipes (connection tank-collector) Antifreeze OPTIONAL ACCESSORIES

Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience

SONNENKRAFT SERVICE

reliable technology

large scale installations

Simple system using the force of natural gravity - no pump unit required.

The Thermosyphon TS-E system is also suitable for parallel mounting. This enables hot water production even for large scale projects.

1860 mm

m

2100 mm

620 mm

620 mm

1030 mm

2013 prices – all prices are indicated in GBP excluding VAT

TS300E

2700 mm

m

2045 mm

20 45

TS150E, 0° TS200E, 0°

2700 mm

1565 mm

620 mm

1000 mm TS150E, 45° TS200E, 45° TS300E, 45°

TS300E

1030 mm 2100 mm

17


what it does The Solar Hot Water and Room Heating solutions from SONNENKRAFT use the energy of the sun to deliver a large part of the energy needed, for free. These solutions can additionally support pool heating.

How it works The sun heats up the liquid in the solar panels on the roof. The heat from the solar liquid is transferred to the water in the backup tank. Then it can be circulated in the room heating system. When hot water is needed in the kitchen or bathroom, the fresh water module heats up the fresh cold water. The solution can also support the heating of swimming pools.

THE Improvement economic The COMFORT E and COMFORT E Plus solutions make the house much more energy efficient, which will save money every day. The solutions improve the energy rating of the home and the costs can be offset by an increase in its value.

Environmental Combustion of oil and gas fossil fuels is considered to be the largest contributing factor to the release of greenhouse gases into the atmosphere. That is why governments in almost every country have set up aggressive goals to reduce carbon dioxide emission. And by applying solar energy also to heating of rooms and swimming pools, the emmisions of the house are reduced even further. Using solar energy emits zero carbon dioxide.

Independency Oil and gas are scarce resources that will run out of over time. The future price is highly uncertain. During the last 10 years the oil price has increased by 300 %. Using as much solar energy as possible reduces the user's dependency on other energy sources, and so removes the worry about increasing fossil fuel prices and future scarce supply.

SKSC2HE

18


Solutions

solar hot water Solar room heating Benefits • Produce up to 50% of the heating and 80% of the hot water demand for free, in well-insulated houses • Using solar energy for both hot water and heating creates a very efficient energy solution • All our hydraulic modules use High Efficiency pumps reducing energy demand by up to 80% • Fresh, hygienic hot water production without any risk of legionella by means of hot water generation on demand • Premium European Quality • Quick and easy installation

the solutions Comfort e This solution consists of the tank PSR-E, a highly efficient pump station and an intelligent fresh water module. It can deliver up to 30 % of total heating and 80 % of the hot water demand.

Comfort E plus This solution can deliver up to 50 % of a household´s heating demand and 80 % of the hot water demand. It consists of the PSC-E tank with an intelligent fresh water module, a highly efficient stratification module and a heating circuit module. All developed to fit perfectly together.

HIGH EFFICIENCY

Now all solutions with high efficieny pumps!

PLUS X Award achieved for Solutions COMFORT E Plus and module FWMi

COMFORT E Plus

A

COMFORT E

2013 prices – all prices are indicated in GBP excluding VAT

19


PLUS X Award achieved for module FWMi

solar hot water Solar room heating

Comfort E The COMFORT E solution by SONNENKRAFT is the cost-effective solution for everyone who needs both hot water and room heating. This solution consists of the PSR-E tank with a high efficient pump station and intelligent fresh water module. It can cover up to 30 % of a household's heating demand and 80 % of the hot water demand. This solutions can additionally be used for heating of pools - indoor or outdoor.

or ct

le

l Co

Hot water

Functional diagram COMfort E Backup boiler

Cold water

Heating flow Heating return Pumping station

20

Backup tank

Fresh water module

Fresh Water Module

PSKR18HE

Fresh, hygienic hot water by means of hot water preparation on demand. An intelligent unit that delivers exactly the quantity of hot fresh water exactly when needed. No hot water storage required, which prevents any risk of development of legionella.

The high efficient PSKR18HE comes with a controller with an easy operating panel. The module with its high efficiency pump saves money at every operating condition and increases the operating range regarding flow by 30 %.

HIGH EFFICIENCY

HIGH EFFICIENCY

A

A


500 L

500 L

800 L*

1000 L*

Persons (Middle/North Europe)

Pers.

1-3

2-4

2-5

4-6

Persons (Southern Europe/Middle East/Africa)

Pers.

1-5

2-6

2-6

4-6

Number of collectors

Pcs

3

4

5

6

Collector surface area

m

7.5

10.1

12,5

15.5

SKR500 sets WITHOUT mounting/flashing

£

5,685.-

6,295.-

7,125.-

7,995.-

2

SKR500

Item no.

153 215

153 222

153 229

153 236

SKR500L

Item no.

153 216

153 223

153 230

153 237

£

5,685.-

6,295.-

7,125.-

7,995.-

SK500N-ECO-AL

SK500-ECO-AL sets WITHOUT mounting/flashing

Item no.

153 219

153 226

153 233

153 240

SK500L-ECO-AL

Item no.

153 220

153 227

153 234

153 241

£

5,995.-

6,750.-

7,750.-

8,495.-

Item no.

153 243

153 244

153 245

153 246

SPECIAL COLLECTOR FOR COASTAL REGIONS and CORROSIVE ENVIRONMENT SK500N-ECO-AL-M IDMK-AL sets WITHOUT mounting/flashing IDMK25-AL

£

5,685.-

6,295.-

7,125.-

7,995.-

Item no.

153 221

153 228

153 235

153 242

£

450.-

550.-

550.-

550.-

Solutions

COMFORT E solutions

See page 36-37, 39, 41 and 43 for mounting systems Corrugated pipe connection set (DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector) For SKR500

Item no.

141 590

141 591

141 591

141 591

For SK500-ECO-AL

Item no.

141 524

141 526

141 526

141 526

For IDMK-AL

Item no.

141 523

141 525

141 525

141 525

*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20 Set components COMFORT E tank

Type

PSR500E

PSR500E

PSR800E

PSR1000E

Solar pumping station incl. cap valve KVAG20

Type

PSKR18HE

PSKR18HE

PSKR18HE

PSKR18HE

FWM fresh water module

Type

FWM15i-CU

FWM15i-CU

FWM15i-CU*

FWM15i-CU*

2-circuit control unit, incl. 4 sensors

Type

SKSC2HE

SKSC2HE

SKSC2HE

SKSC2HE

Expansion tank

Type

AG25S

AG33S

AG33S

AG50S

l

20

20

20

25

Antifreeze

Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience

SONNENKRAFT SERVICE

COMFORT E SOLUTION SETS WITH FWM30i-CU (*only for 800l and 1000l sets) Set item no. + addition "-30CU"

110.-

110.-

Optional products (via set change) Reduced price PSKR18HE-O

180.-

Surcharge FWM15i-VA

715.-

Surcharge FWM30i- VA

1,110.-

Note: more info about modules from page 54

Improvement of stratification

Height adjustable feet

The solar register is encapsulated; resulting in faster loading of the upper part of the tank and a higher temperature difference in the tank and a better performance for heating support during the colder months of the year. The insulation fits perfectly and reduces the heat loss.

This enables a perfect placement of the tank, even if it is installed on uneven surfaces. The bottom border covers the feet to create a nice look.

2013 prices – all prices are indicated in GBP excluding VAT

21


PLUS X Award achieved for Solutions COMFORT E Plus and module FWMi

solar hot water Solar room heating

Comfort E plus The COMFORT E Plus solution is the sophisticated solar thermal solution for hot water and room heating with the highest energy output. This solution can cover up to 50 % of your heating and 80 % of the hot water demand. It consists of our highly efficient PSC-E tank with an intelligent fresh water module, a highly efficient stratification module, and an optional high efficient heating circuit module. All developed to fit perfectly together. The high efficient heating circuit module HKM20HE can also be mounted on the COMFORT E Plus solution, to directly operate the radiator or floor heating system time and weather controlled. The RAS20 ensures the most efficient application of solar thermal energy in combination with the existing heating system, especially with condensing boilers. COMFORT E PLUS can also be used for pool heating.

or ct

Boiler flow

le

l Co

Hot water

Functional diagram COMfort E plus

Boiler return

Heating flow

Stratified charging module

Cold water

Heating return

Fresh water module

Backup tank

Fresh Water Module

20 % reduction of heat loss

Fresh, hygienic hot water by means of hot water preparation on demand. An intelligent unit that delivers exactly the quantity of hot fresh water exactly when needed. No hot water storage required, which prevents any risk of development of legionella.

The fleece insulation fits perfectly to the PSC-E tank and is easy to remove and put on again. Together with the new patented insulation caps it reduces the heat loss significantly and keeps the valuable solar yield to heat the household.

HIGH EFFICIENCY

A

22


800 L

1000 L

1600 L

2000 L

Persons (Middle/North Europe)

Pers.

3-6

4-8

4-8

4 - 10

Persons (Southern Europe/Middle East/Africa)

Pers.

3-6

4-8

4-8

4 - 10

Number of collectors

Pcs

5

6

8

10

Collector surface area

m

12.5

15.1

20.1

25.5

£

9,195.-

9,995.-

12,675.-

14,095.-

2

SKR500 sets WITHOUT mounting/flashing SKR500

Item no.

153 301

153 308

153 315

153 322

SKR500L

Item no.

153 302

153 309

153 316

153 323

£

9,195.-

9,995.-

12,675.-

14,095.-

SK500N-ECO-AL

SK500-ECO-AL sets WITHOUT mounting/flashing

Item no.

153 305

153 312

153 319

153 326

SK500L-ECO-AL

Item no.

153 306

153 313

153 320

153 327

£

9,500.-

10,450.-

13,250.-

14,650.-

Item no.

153 364

153 365

153 366

153 367

SPECIAL COLLECTOR FOR COASTAL REGIONS and CORROSIVE ENVIRONMENT SK500N-ECO-AL-M IDMK-AL sets WITHOUT mounting/flashing IDMK25-AL

£

9,195.-

9,735.-

12,350.-

13,710.-

Item no.

153 307

153 314

153 321

153 328

£

550.-

550.-

550.-

550.-

Solutions

comfort E plus solutions

See page 36-37, 39, 41 and 43 for mounting systems Corrugated pipe connection set (DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector) For SKR500

Item no.

141 591

141 591

141 591

141 591

For SK500-ECO-AL

Item no.

141 526

141 526

141 526

141 526

For IDMK-AL

Item no.

141 525

141 525

141 525

141 525

Type

PSC800E

PSC1000E

PSC800E +PS800E

PSC1000E +PS1000E

FWM fresh water module

Type

FWM15i-CU

FWM15i-CU

FWM15i-CU

FWM15i-CU

Stratification module

Type

SLM50HE

SLM50HE

SLM50HE

SLM50HE

3-circuit control unit, incl. 5 sensors and 2 GF sensors

Type

SKSC3+

SKSC3+

SKSC3+

SKSC3+

Expansion tank and cap valve KVAG

Type

AG33S

AG50S

AG80S

AG100S

l

20

25

30

30

*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20 Set components COMFORT E Plus tank

Antifreeze SONNENKRAFT SERVICE

Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience

COMFORT E Plus SOLUTION SETS WITH FWM30i-CU Set item no. + addition "-30CU"

110.-

110.-

110.-

110.-

Optional products (via set change) Reduced price SLM50HE-O

420.-

Surcharge FWM15i-VA

715.-

Surcharge FWM30i- VA

1,110.-

ADDITIONAL PRODUCTS - HKM20HE (131 221) - 1,135.-, RAS20 (131 325) - 835.Note: more info about modules from page 54

Intelligent solar heating

Stratification module

The RAS20 increases the temperature of the heating return line only as much as necessary. It’s intelligent controller takes only as much solar energy as necessary to reach the desired flow temperature. Combined with the perfect stratifying PSC-E tank the efficiency of the total heating system will increase significantly.

The SLM50HE guarantees optimal stratification in the storage tank. The high efficiency pumps ensure optimum perfomance at each operating mode and reduces electricity consumption by 80%.

HIGH EFFICIENCY

A

2013 prices – all prices are indicated in GBP excluding VAT

23


what it does The SOL+ solution combines solar energy with the HP12M air-water heat pump, upgrading any solar heating solution to a complete and almost fully renewable heating system. 100% of the whole energy demand for hot water and heating is covered by this solution!

How it works The air-water heat pump HP12M in combination with solar heating system COMFORT E or COMFORT E plus results in a complete heating system without need for any other auxiliary heating. Solar panels are heating up a buffer tank where the upper part is used as hot water storage. A fresh water module uses this water to generate hot water for domestic use. The remaining energy in the buffer tank is being used for heating the building. The heat pump is only used when there is not enough solar energy in the tank to fulfill the heat demand of the building. It also only operates when there is an instant need for energy and using cutting edge modulating compressor technology, ensures it is highly efficient. Free solar energy is used when there is a need for frost protection ensuring a coordinated and highly efficient design.

THE Improvement Economic In combination with a COMFORT E, COMFORT E Plus or an already installed solar heating solution the air-water heat pump makes the house much more energy efficient, which will save money every day. This particular solution provides you with hot water and room heating all year without need for any backup system. The solutions improve the energy grade of the house considerably, so that the investment will be offset by a higher value of the house.

Environmental Combustion of oil and gas fossil fuels is considered to be the largest contributing factor to the release of greenhouse gases into the atmosphere. That is why governments in almost every country have set up aggressive goals to reduce carbon dioxide emission. Using solar energy emits zero carbon dioxide, and combining a solar thermal solution with a heat pump contributes even more to reduce CO2 emmisions.

Independency Oil and gas are scarce resources that will run out of over time. The future price is highly uncertain. During the last 10 years the oil price has increased by 300 %. When combining solar thermal energy with a heat pump, the household becomes nearly totally energy self-sufficient, which minimizes the user's dependency on other energy sources, and so removes the worry about increasing fossil fuel prices and future scarce supply.

24


Solutions

solar hot water Solar room heating Solar heat pump Benefits • Via intelligent combination of solar and heat pump, this solution covers the whole energy demand for hot water and heating! Therefore, more than 90% of the hot water and more than 75 % of the heating demand is covered by energy from sun and air for free • Complete Heating System made in Europe at the cutting edge with a superior quality level, highest efficiency and outstanding operation comfort • Fresh, hygienic hot water supply in continuous flow mode • Low installation time with “Plug & Flow" • One controller with touch display and WEB-applications to control the complete heating solution

the solution SOL+ This solution includes all necessary components to deliver hot water and room heating all year without the need for any backup systems. Combining the heat pump with a solar thermal solution from SONNENKRAFT, almost the complete energy demand of a modern home can be covered with renewable energy.

HIGH EFFICIENCY

Now all solutions with high efficieny pumps!

PLUS X Award achieved for module FWMi

A

2013 prices – all prices are indicated in GBP excluding VAT

SOL+

25


solar hot water Solar room heating Solar Heat Pump

SOL+ The SOL+ solution is SONNENKRAFT’s brand new solution which makes the household near to energy self-sufficient. The solution combines solar thermal energy with an air-water heat pump, and eliminates the need for any additional backup heating. The HP12M heat pump in the SOL+ solution offers an outstanding efficiency because of generously designed components and the use of modulating compressor and fan unit. It is combined with either a COMFORT E or a COMFORT E Plus Solar system. A controller with full graphic touch display makes sure that the system covers the energy demand of the home with a maximum amount of renewable energy, so that this solution covers more than 90% of the hot water and more than 75% of the heating demand by free energy from the sun and the air.

Functional diagram SOL+ Hot water

or ct

Pumping station Heatpump (CPHP)

Pumping station Storage tank (PSR-E)

26

Cold water

le

l Co

Fresh water module

EUROPEAN QUALITY & MORE

ALL IN ONE CONTROLLER

Besides an outstanding high efficiency the European Quality ensures easy installation, long lifetime and maintenance reduced to a minimum. A great design tops all this off.

The preset all in one controller with easiest and intuitive menu navigation via full graphic touch display monitors and controls the complete system in an optimum way all year round. Integrated energy balancing for the solar system and the heat pump, and the possible integration into a home network remote control, make the system much more convenient to use!


500 L

1000 L*

1000 L*

Pers.

2-4

4-6

4-8

Heat pump HP12M

kW

4 - 12

4 - 12

4 - 12

Number of collectors

Pcs

3

6

6

Collector surface area

m

7.5

15.1

15.1

Persons

2

£

22,950.-

26,995.-

28,750.-

SKR500

SKR500 sets WITHOUT mounting/flashing

Item no.

152 031

152 037

152 043

SKR500L

Item no.

152 032

152 038

152 044

£

22,950.-

26,995.-

28,750.-

SK500-ECO-AL sets WITHOUT mounting/flashing SK500N-ECO-AL

Item no.

152 033

152 039

152 045

SK500L-ECO-AL

Item no.

152 034

152 040

152 046

£

23,995.-

27,250.-

28,895.-

Item no.

152 035

152 041

152 047

£

22,950.-

26,995.-

28,750.-

Item no.

152 036

152 042

152 048

£

450.-

550.-

550.-

Item no.

141 590

141 591

141 591

For SK500-ECO-AL

Item no.

141 524

141 526

141 526

For IDMK-AL

Item no.

141 523

141 525

141 525

Tank

Type

PSR500E

PSR1000E

PSC1000E

Solar pumping station

Type

PSKR18HE-O

PSKR18HE-O

SLM50HE-O

FWM Fresh water module

Type

FWM15i-CU

FWM15i-CU*

FWM15i-CU*

SPECIAL COLLECTOR FOR COASTAL REGIONS and CORROSIVE ENVIRONMENT SK500N-ECO-AL-M IDMK-AL sets WITHOUT mounting/flashing IDMK25-AL

Solutions

SOL+ solutions

See page 36-37, 39, 41 and 43 for mounting systems Corrugated pipe connection set (DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector) For SKR500

*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20 Set components

Heating module incl. wall mounting kit

Type

HKM20HE-O

HKM20HE-O

Type / l

AG25S / 20

AG50S / 25

AG50S / 25

System controller incl. sensors (SKSAFR and RSHP)

Type

SKSCHP

SKSCHP

SKSCHP

System circulation pump

Type

CPHP

CPHP

CPHP

Diverter valve (incl. el. actuator)

Type

1 x DWVHP

2 x DWVHP

2 x DWVHP

Expansion tank / Antifreeze

SONNENKRAFT SERVICE

Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience

SOL+ SOLUTION SETS WITH FWM30i-CU (* only for 1000lt sets) Set item no. + addition "-30CU"

255.-

145.-

Optional products (via set change) Surcharge Hydrobox HBHP instead of single components CPHP and DWVHP for easy installing (only for 1000l sets)

510.-

Surcharge FWM15i-VA

715.-

Surcharge FWM30i- VA

1,110.-

ADDITIONAL PRODUCTS - EHP25SET Electr. Heating Element 2,5 kW (120 169) - 645.-, EHP45SET Electr. Heating Element 4,5 kW (120 170) - 695.Note: more info about modules from page 54; *) ONLY for 1000L-Sets. Direct room heating via PSR500E is not recommended! Attention: please note that there are different system diagrams for different set sizes (see diagramm manual or manual HP12M).

All energy all year

MOST EFFICIENT ON THE MARKET

The combination of COMFORT E or COMFORT E Plus with the heat pump HP12M ensures that all the hot water and room heating which is needed can be delivered this solution – also in winter, when the sun delivers less irradiation.

A very high efficient modulating compressor and fan unit ensures an outstanding COP all year round – in times with high and low energy demand. Even down to -15ºC this heat pump is able to deliver 10 kW heat capacity. The market has never seen a more efficient air-water monoblock heat pump.

2013 prices – all prices are indicated in GBP excluding VAT

27


SOL+ Heat pump

hp12M

The brand new and exclusive SOL+ heat pump HP12M combines the latest heat pump technology with SONNENKRAFTs outstanding solar know-how. Via the easy and intuitive system controller SKSCHP the heat pump could be combined very easily with all heating and PV solutions of SONNENKRAFT. ALL IN ONE CONTROLLER

HIgh efficiency

ALL ENERGY ALL YEAR

The system controller SKSCHP with touch display enables the perfect interaction of heat pump and all other components of the solar system. The menu navigation is easy and intuitive.

A very high efficient Solar Heat Pump with and outstanding COP ensures - together with the high efficient solar system solutions of SONNENKRAFT - minimum energy costs.

In combination with a SONNENKRAFT system solution for heating the HP12M is a complete renewable energy solution providing all hot water and heating demand all over the year.

Specifications

HEAT PUMP SOLAR

Technical Data Heating capacity variable

kW

4,5 – 12,0

*Nominal heating capacity

kW / COP

8,0 / 4,71

**Nominal heating capacity

kW / COP

6,9 / 4,02

*at A7/W35 according to EN14511 (50% of maximal load) **at A2/W35 according to EN14511 (50% of maximal load)

Height

mm

1643

Widht

mm

951

Depth

mm

965

Weight

kg

190

Volt / Hz

400 / 50

Fuse protection Heat Pump

A

C16 & C10

Device connections for heating system

"

RN 5/4

Sound pressure level in 5 m distance

dB(A)

41

Max. hot water temperature

°C

60

Min. ambient air temperature Refrigerant / filling weight

Air-water heatpump, for heating applic., 4.5 - 12 kW, 400V, for exterior installation - stepless variable BLDC compressor and EC axial fan - Smooth start via inverter technology - Vibration decoupled connections - ModBUS interface mandatory order of SKSCHP, 141183

13,750.-

SKSCHP

System controller for SOL+ solutions with weather-controlled, multi-lingual system controller with full grafic touch display - Intuitive menu navigation - Commissioning wizard - Automatic season identification - Cement flooring bake out function - Holiday function - Energy balancing - LAN connection to home network Control of up to 2 heating ciruits with 3-way-mixing valves, 1 direct heating circuit, 1 solar station (PSKRHE-O or SLM50HE-O), 1 east-west collector charging or swimming pool heating, electrical auxiliary heating system and command of external auxiliary heating (bivalent boiler). All pumps must be high efficient pumps with PWM-signal. WxDxH: 500x180x400mm

2,250.-

141 183

Dimensions

Main supply

HP12M

132 104

°C

–20

- / kg

R410A / 5.8 via inverter technology

Smooth start

Fits with following System solutions

ACCESSORIES SKSAFR

Outdoor temperature sensor PT1000

50.-

RSHP

Room temperature sensor PT1000

45.-

EHP25-SET

Auxiliary Electrical Heating Set 2,5kW for tube integration, consisting of electrical heating element 2,5kW, 6/4" male thread, built-in tube for e-heater, electric contactor and terminals. Works as instantaneous hot water heater and provides temporary auxiliary heating of the water for the heating circuit of the heat pump

645.-

EHP45-SET

Auxiliary Electrical Heating Set 4,5kW for tube integration, like EHP25 Set, 120 169 but with 4,5kW electrical heating element

695.-

CPHP

HE Circulation pump UWP GEO for HP12M, 230V, max. delivery height 8,5m, pipe connections 6/4", built-in length 130mm, control signal PWM

295.-

DWVHP

3-way diverter valve for operation modes heating/hot water, DN32 (Rp5/4"), incl. actuator

245.-

HBHP

Hydrobox for HP12M, consisting of circulation pump and 3-way diverter valve for operation modes heating/hot water, filter, 2 check valves, connection to possible external auxiliary heater and insulating shell

1,295.-

141 127

132 046

120 169

120 170

132 043

COMFORT E

COMFORT E Plus

COMPACT POWER

Note: see page xx for expansion tanks.

Fits with following modules Note: in combination with HP12M wall mounting of HKM20HE-O is mandatory (HKM20/RAS-WMS)

28

HIGH EFFICIENCY

A

HKM20HE-O See page 59

132 044

132 045


large

2013 prices – all prices are indicated in GBP excluding VAT

Solutions XL

installations

29


SOLAR HEATING FOR HIGH HOT WATER DEMAND

Comfort E plus XL The COMFORT E Plus XL solution from SONNENKRAFT is the optimum solution for apartment buildings, hotels, camping sites, sports facilities and other large installations with high hot water demand.

FUNCTIONAL DIAGRAM COMFORT E PLUS

Boiler flow Heating flow Boiler return Heating return Stratified charging module

HIGH EFFICIENCY

Now all solutions with high efficieny pumps!

2 x Fresh water module

Cold water

Hot water

Co l

le

ct or

(HIGH HOT WATER DEMAND)

PLUS X Award achieved for module FWMi

A

Beneficial investment

HYGIENIc Hot water

High energy savings for heating and hot water reduces utility costs and is therefore highly appreciated by tenants. Furthermore the sustainable, environmental friendly investment increases the value of the building.

The new Fresh Water Module Cascade FWMi provides hygienic hot water only if needed via instantaneous hot water production - even at high hot water demands up to 120 l/min.

30


comfort E plus XL SOLUTIONS 1500 L

1600 L

2000 L

3000 L

Pcs

6

8

8

10

15

3000 L 20

Collector surface area

m2

15,1

20,1,

20.1

25.5

37,5

50

SKR500 sets WITHOUT mounting/flashing

£

9,615.-

11,560.-

13,005.-

14,610.-

20,280.-

23,805.-

SKR500

Item no.

153 801

153 807

153 813

153 819

153 825

153 831

SKR500L

Item no.

153 802

153 808

153 814

153 820

153 826

153 832

SK500-ECO-AL sets WITHOUT mounting/flashing

£

9,605.-

11,540.-

12,985.-

14,590.-

20,165.-

23,760.-

SK500N-ECO-AL

Item no.

153 803

153 809

153 815

153 821

153 827

153 833

SK500L-ECO-AL

Item no.

153 804

153 810

153 816

153 822

153 828

153 834

£

9,930.-

11,975.-

13,425.-

15,135.-

21,065.-

24,850.-

Item no.

153 805

153 811

153 817

153 823

153 829

153 835

£

9,325.-

11,175.-

12,620.-

14,130.-

19,560.-

22,840.-

Item no.

153 806

153 812

153 818

153 824

153 830

153 836

£

550.-

550.-

550.-

For SKR500

Item no.

141 591

141 591

141 591

-

-

-

For SK500-ECO-AL

Item no.

141 526

141 526

141 526

-

-

-

For IDMK-AL

Item no.

141 525

141 525

141 525

-

-

-

Type

PSC1000E

PS1500E

2x PSC800E

2x PSC1000E

Stratified charging module

Type

SLM50HE

SLM50HE

SLM50HE

SLM50HE

SLM50HE

SLM50HE

Cap valve

Type

KVAG20

KVAG25

KVAG25

KVAG25

KVAG25

KVAG25

3-circuit control unit, incl. 5 sensors and 5 GF sensors

Type

SKSC3+

SKSC3+

SKSC3+

SKSC3+

SKSC3+

SKSC3+

Expansion tank

Type

AG50S

AG80S

AG80S

AG100S

AG200S

AG200S

l

25

30

30

30

40

40

SPECIAL COLLECTOR FOR COASTAL REGIONS and CORROSIVE ENVIRONMENT SK500N-ECO-AL-M IDMK-AL sets WITHOUT mounting/flashing IDMK25-AL

Solutions XL

1000 L Number of collectors

See page 36-37, 39, 41 and 43 for mounting systems Corrugated pipe connection set (DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector)

*) Collector area < 10 m = DN16, collector area ≥ 10 m = DN20 2

2

Set components COMFORT E Plus tank / Backup tank

Antifreeze

2x 2x PSC1000E PSC1000E 1 x PS1000E 1 x PS1000E

ADD ONE OF THE FOLLOWING FRESH WATER MODULE CASCADE SETS For Wall Mounting

Delivery rate

2 x FWM30i-CU

2 l - 60 l

Incl. 1 recirculation pump

Without recirculation pump

£

6,425.-

6,195.-

Item no.

131 121

131 124

Incl. 1 recirculation pump

Without recirculation pump

£

4,765.-

4,535.-

Item no.

131 127

131 130

For Tank Mounting (on PSC-E) 2 x FWM30i-CU

2 l - 60 l

Note: For a accurate dimensioning of FWM30i cascades please contact the SONNENKRAFT Sales Team Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience

SONNENKRAFT SERVICE

ADDITIONAL PRODUCTS - HKM20HE (131 221) - 1,135.-

Optional products (via set change) Reduced price SLM50HE-O

420.-

Surcharge FWM15i-VA

715.-

Surcharge FWM30i- VA

1,110.-

Note: more info about modules from page 54

2013 prices – all prices are indicated in GBP excluding VAT

31


Hot water / heating systems

comfort E xl SONNENKRAFT’s COMFORT E XL system guarantees maximum solar yield for large-scale systems. Areas of application are many, such as tourism, hospitals and care facilities as well as public buildings.

3000 L Collector surface area

30 m

40 m2

£

9,000.-

12,000.-

Hot water requirement (50° C)

I/d

2.000

2.500

Solar coverage

%

36,4

38,4

MWh/a kWh/m2/a

18,9 698

24,1 667

kg/a

6.695

8.526

Approximate Price indication for collector field (without mounting system)

2

Solar Yield (Middle/North Europe)

Solar yield CO2 emission savings

Solar Yield (South Europe/Middle East/Africa) Hot water requirement (50° C)

I/d

2.000

2.500

Solar coverage

%

52,6

55,9

MWh/a kWh/m2/a

28,2 1.041

36,2 1.002

kg/a

9.986

12.814

£

13,600.-

13,700.-

Solar yield CO2 emission savings Approximate Price indication for set components Recommended tank

type

Fresh water module set*

type

Stratified charging module

type

SLM50HE

Expansion tank

type

AG200S

Antifreeze

HIGH EFFICIENCY

PS3000E 2 x FWM30i

I

*) Now all solutions with high efficieny pumps!

2 x FWM30i

30

PLUS X Award achieved for module FWMi

A

Highly efficient

POOL AND / OR BACKUP HEATING

Highly efficient stratified charging of the backup tank by means of premounted stratified charging module.

Ideally suited for integration of solar swimming pool heating and / or backup heating

32

40


Comfort E XL Solutions 5000 L

10000 L

15000 L

50 m

60 m

75 m

120 m

150 m

200 m

250 m

300 m2

15,000.-

18,000.-

22,500.-

36,000.-

45,000.-

60,000.-

74,900.-

89,900.-

3.000

3.500

4.000

5.000

7.500

10.000

15.000

20.000

39,9

40,6

43,5

50,4

46

44,3

39,1

34,3

29,4 651

34,2 630

41,2 608

59 544

76,4 564

100,6 557

128,9 571

150,1 554

10.401

12.095

14.585

20.876

27.034

35.600

45.611

53.095

3.000

3.500

4.000

5.000

7.500

10.000

15.000

20.000

58,7

60,1

77,4

73,8

69,8

67,5

61,7

55,3

44,5 986

52,1 961

63,2 932

89,3 823

118,5 874

156,1 863

205,1 908

242,9 896

15.756

18.441

22.356

31.581

41.933

55.208

72.560

85.909

16,000.-

24,800.-

25,200.-

29,400.-

36,500.-

36,300.-

45,500.-

45,600.-

4 x FWM30i-CU

4 x FWM30i-CU

2

2

2 x PS2000E 2 x FWM30i-CU

2

2

PS5000E

3 x FWM30i-CU

3 x FWM30i-CU

2

2

2 x PS5000E

SLM120

Solutions XL

4000 L 2

3 x PS5000E

4 x FWM30i-CU

4 x FWM30i-CU

SLM200

4 x FWM30i-CU

SLM50HE

SLM120

AG200S

AG300S

AG300S

AG500S

AG500S

2 x AG300S

2 x AG500S

SLM200 2 x AG500S

40

50

60

80

100

140

180

200 Hot water

Existing boiler

Circulation Reheating

or ct Hot water

le

l Co

Boiler flow

or ct

le

l Co

Cold water

Boiler return

Stratified charging module

Backup tank

Cold water Stratified charging module SLM120/200

Fresh water module

Backup tank

Pre-heating

Use in new constructions

Retrofitting application

Fresh, hygienic hot water through continuous water heating (fresh water module)

Optimal solar energy use through continuous water heating (preheating phase)

Prevention of infections or legionella formation in the drinking water heating system

Low conversion costs through simple integration into existing systems without the typical boiler expansion Higher efficiency than with hot water tank preheating systems

NOTE: •

Highest possible system efficiency is the main focus of above system dimensioning

These dimensioning tables are in no way replacing professional planning, which is a mandatory requirement

Verify the table results with simulation calculations (www.sonnenkraft.com/partner area)

COMFORT E XL building sets can also be used for partial-solar space heating systems and solar swimming pool heatings

Collector surfaces are rounded

2013 prices – all prices are indicated in GBP excluding VAT

Please use the SONNENKRAFT planning data sheet for your request. The SONNENKRAFT engineering team will assist in the detailed system design. Calculation based on: •

Regional climate details: Graz, Austria / Rome, Italy Collector field: SKR500, inclination 45°

Water heating with fresh water module, incl. 25% circulation

Multi family house hot water requirement profile, 50°C

Basis of CO2 savings calculation: Oil-fired system

33


CollectorS

SKR500

SK400N-AL

IDMK-al

GK-HP

The unique and exclusive SONNENKRAFT collector combines the latest technology with established know-how. It is the most efficient collector in our portfolio.

The versatile SK400N-AL collector can be installed either on-roof or in-roof offering total flexibility.

IDMK-AL in-roof collectors are directly integrated in the roof cladding and particularly suited for roofs with southern exposure.

The brand new GK-HP with improved efficiency is the best solution in large scale installations for roof-mounted or freestanding collector arrays.

34


SKR500

The unique and exclusive SONNENKRAFT SKR500 collector has an efficiency h0 of 82% making it one of the best performing collectors on the market. It combines the latest technology with established know-how. The SKR500 is the first collector with a frame-less glass design and an easy mounting system providing simple and fast installation using only one standard tool. LESS TOOLS NECESSARY

Frameless design & Great Mounting options

The collector design allows a high flexibility in configurating the collector field and it´s hydraulic connections.

For all main applications you can mount the SKR500 with very few tools. We call it “Plug & Flow".

The frameless flat collector looks great in all installation variants. The SKR500 has the widest range of mounting sytems of all SONNENKRAFT collectors.

Specifications

Collectors SKR500 111 144

SKR500

SKR500L

011-7S 1277F

011-7S 1284F

HxWxD: 2079x1240x95

HxWxD: 1240x2079x95

Solar Keymark Reg. No. Dimensions (mm)

38 kg

Weight

SKR500L 111 145

2.57 m

Aperture area

2.26 m2

Absorber area

2.30 m2

SKR-TH 110 047

2

SKR-ES 110 048

110 050

10 to 35 l/h per m2

Recommended throughput

Max. 12 pcs. parallel

Collector field piping

Max. 10 pcs. parallel

SKR-EV

Collector housing

15.-

HVS25-EWSID 110 065

2079 mm

Meander

Collector glazing

3.2 mm toughened, low iron solar safety glass

Efficiency (Aperture) ƞ0a

0.82

Heat SKR-HV* transfer coefficientSKR-HV* a1a

3.821

Temperature depending 1240 heat mm transfer 42 mm coefficient 1240 mm a42 mm 2a

0.0108 1240 mm

SKR-TH

HVS25

SKR-ES*

HVS25

SKR-ES*

HVS25

SKR-SA

HVS25

SKR-SA

3.514

BBALGK/SKR 111 826

1 pc. concrete ballast for SKR500, weight: 285 kg

0.0147

SKR-HV*

40.255.-

SKR-HV*

SKR-TH

NOTE! The black marked connectors (*) are included within the roof-mounting systems, the orange/bold ones must be ordered separately (see next 2 pages)!

170.-

Recommended connection SKR-EV

SKR-ES*

SKR-SA

SKR-HV* 2013 prices – all prices are indicated in GBP excluding VAT

Hydraulic connection set for 25 m2 (4 SKR-SA + connections DN20-1” female thread + 4 sealings) 1 x SKR repair connector; for collector or connector replacement

110 049

0.794

25.-

Air vent for SKR collector, 1 x per collector field

SKR-RV

Hydraulic design

15.-

SKR-EV

50 mm mineral wool

Heat insulation

2 x end caps for blanking off unused SKR connections

20.-

110 074

Deep-drawn, salt water resistant aluminium tray

45.-

1 x 90°, ø 18 system corner connector

95 % / 5 %

SKR-HV*

Immersion sleeve for temperature measurement directly in the medium; 1 x per collector field

SKR-WA 110 052

Full surface aluminium absorber, highly selective vacuum coating

Absorber

625.-

13.-

110 051

18 mm copper pipe

Connections

Landscape format mounting

1 x system connection 1" male flat seal on SKR quick connector

SKR-SA

Minimum 15˚, maximum 75˚

Collector incline

625.-

2 x hydraulic SKR quick connectors; for the toolfree hydraulic connection

SKR-HV

10 bar

Max. operation pressure

Portrait format mounting

Accessories/Spare parts

38.5 kg

Gross area

Absorption/Emission SKR-HV*

Collectors

High Flexibility

2079 mm

*

Roof-mounted collector

SKR-HV* 1240 mm

42 mm

SKR-HV* 1240 mm

42 mm

1240 mm

35


SKR500 No. of mounting supports2)

No. of collectors1)

roof-mounting systems

Universal roof

Sheet metal roof

Bench screw mounting systems

Support plate mounting systems

tilted 20˚ SSA20R

parallel SSPR

tilted 45˚ SSA45R

tilted 20˚ BDA20R

parallel BDPR

tilted 45˚ BDA45R

Note: Please choose the mounting system that fits to your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!

SKR500

1

2

112 921

155.-

112 933

235.-

112 945

245.-

111 753

555.-

111 765

605.-

111 777

615.-

2

2

112 922

265.-

112 934

330.-

112 946

340.-

111 754

645.-

111 766

700.-

111 778

710.-

3

4

112 923

425.-

112 935

550.-

112 947

570.-

111 755

1,190.-

111 767

1,290.-

111 779

1,310.-

4

4

112 924

520.-

112 936

650.-

112 948

665.-

111 756

1,285.-

111 768

1,390.-

111 780

1,410.-

5

5

112 925

655.-

112 937

815.-

112 949

840.-

111 757

1,615.-

111 769

1,740.-

111 781

1,765.-

6

6

112 926

780.-

112 938

970.-

112 950

995.-

111 758

1,925.-

111 770

2,080.-

111 782

2,110.-

7

7

112 927

915.-

112 939

1,135.-

112 951

1,170.-

111 759

2,250.-

111 771

2,430.-

111 783

2,465.-

8

8

112 928

1,035.-

112 940

1,290.-

112 952

1,325.-

111 760

2,565.-

111 772

2,770.-

111 784

2,810.-

9

10

112 929

1,195.-

112 941

1,510.-

112 953

1,560.-

111 761

3,105.-

111 773

3,365.-

111 785

3,410.-

10

11

112 930

1,315.-

112 942

1,665.-

112 954

1,720.-

111 762

3,420.-

111 774

3,700.-

111 786

3,755.-

11

12

112 931

1,450.-

112 943

1,830.-

112 955

1,890.-

111 763

3,745.-

111 775

4,055.-

111 787

4,110.-

12

13

112 932

1,575.-

112 944

1,985.-

112 956

2,050.-

111 764

4,060.-

111 776

4,390.-

111 788

4,445.-

112 987

25.-

112 988

55.-

112 989

60.-

111 789

215.-

111790

255.-

111 792

260.-

Additional mounting supports for SKR500

SKR500L

1

2

112 957

200.-

112 967

250.-

112 977

255.-

112 701

585.-

112 711

640.-

112 721

645.-

2

3

112 958

370.-

112 968

440.-

112 978

450.-

112 702

945.-

112 712

1,030.-

112 722

1,040.-

3

4

112 959

540.-

112 969

630.-

112 979

645.-

112 703

1,305.-

112 713

1,420.-

112 723

1,430.-

4

6

112 960

735.-

112 970

870.-

112 980

890.-

112 704

1,880.-

112 714

2,055.-

112 724

2,070.-

5

7

112 961

900.-

112 971

1,065.-

112 981

1,085.-

112 705

2,240.-

112 715

2,440.-

112 725

2,460.-

6

8

112 962

1,070.-

112 972

1,255.-

112 982

1,280.-

112 706

2,600.-

112 716

2,830.-

112 726

2,855.-

7

10

112 963

1,265.-

112 973

1,495.-

112 983

1,525.-

112 707

3,175.-

112 717

3,465.-

112 727

3,490.-

8

11

112 964

1,435.-

112 974

1,690.-

112 984

1,720.-

112 708

3,535.-

112 718

3,855.-

112 728

3,885.-

9

12

112 965

1,605.-

112 975

1,880.-

112 985

1,915.-

112 709

3,895.-

112 719

4,245.-

112 729

4,275.-

10

14

112 966

1,795.-

112 976

2,120.-

112 986

2,160.-

112 710

4,470.-

112 720

4,875.-

112 730

4,915.-

112 987

25.-

112 991

50.-

112 992

50.-

111 789

215.-

111 791

245.-

111 793

245.-

Additional mounting supports for SKR500L

1) All listed installations sets also contain the appropriate number of hydraulic connections SKR-HV and two end caps SKR-ES. Per collector array 2 connectors have to be ordered separately (see drawings on previous page eg. SKR-SA or SKR-WA, ...) 2) The listed installation systems are designed for a maximum snow load from 1,8 up to 2,5 kN/m2 and a wind load from 140 of up to 150 km/h. The loads require the stated number of support members and a rafter spacing

36

of 90 cm. For detailed information and requirements please follow the appropriate installation manual! For snow loads higher than 1,25 kN/m2 metal roof tiles are recommended! 3) Weight per concrete ballast element: 285 kg. The concrete ballast elements shall be mounted only on sufficiently load-carrying roof surface and roof sub-construction. The check of the load-carrying capacity by an expert is mandatory!


Roof bracket for high profile tiles

Roof bracket mounting systems tilted 20˚ DBA20R

parallel DBPR

height adjustable (125 - 165 mm)

fixed height (165 mm)

parallel DBPR-H

parallel DBPR-R

No. of mounting supports2)

No. of mounting supports2)

No. of collectors1)

Tiled roof Tiled roof

Flat roof Concrete ballast3)

Wall mounting

tilted 45˚ BBALSKR45

tilted 45˚/60˚ WA45-60R

Note: Please choose the mounting system that fits to your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!

1

2

112 649

160.-

112 661

250.- 112 649-H

335.- 112 649-R

275.-

2

111 827

755.-

112 731

600.-

2

2

112 650

235.-

112 662

340.- 112 650-H

425.- 112 650-R

365.-

2

111 828

845.-

112 732

705.-

3

4

112 651

380.-

112 663

580.- 112 651-H

750.- 112 651-R

630.-

3

111 829

1,275.-

112 733

1,065.-

4

4

112 652

535.-

112 664

675.- 112 652-H

845.- 112 652-R

725.-

4

111 830

1,685.-

112 734

1,410.-

5

5

112 653

675.-

112 665

850.- 112 653-H

1,060.- 112 653-R

910.-

5

111 831

2,115.-

112 735

1,775.-

6

6

112 654

795.-

112 666

1,010.- 112 654-H

1,265.- 112 654-R

1,085.-

6

111 832

2,525.-

112 736

2,120.-

7

7

112 655

935.-

112 667

1,185.- 112 655-H

1,480.- 112 655-R

1,270.-

7

111 833

2,955.-

112 737

2,480.-

8

8

112 656

1,060.-

112 668

1,345.- 112 656-H

1,680.- 112 656-R

1,445.-

8

111 834

3,365.-

112 738

2,830.-

9

10

112 657

1,225.-

112 669

1,580.- 112 657-H 2,005.- 112 657-R

1,705.-

9

111 835

3,795.-

112 739

3,190.-

10

11

112 658

1,350.-

112 670

1,740.- 112 658-H 2,205.- 112 658-R

1,875.-

10

111 836

4,205.-

112 740

3,535.-

11

12

112 659

1,490.-

112 671

1,915.- 112 659-H 2,420.- 112 659-R 2,065.-

11

111 837

4,635.-

112 741

3,895.-

12

13

112 660

1,615.-

112 672

2,075.- 112 660-H 2,625.- 112 660-R 2,235.-

12

111 838

5,045.-

112 742

4,245.-

Additional mounting supports SKR500

112 693

30.-

112 694

111 849

315.-

110 058

240.-

65.-

112 699

105.-

112 826

75.-

SKR500L

1

2

112 673

205.-

112 683

260.- 112 673-H

365.- 112 673-R

305.-

2

111 839

765.-

112 743

500.-

2

3

112 674

380.-

112 684

460.- 112 674-H

610.- 112 674-R

525.-

3

111 840

1,215.-

112 744

830.-

3

4

112 675

550.-

112 685

660.- 112 675-H

860.- 112 675-R

745.-

4

111 841

1,660.-

112 745

1,155.-

4

6

112 676

750.-

112 686

915.- 112 676-H

1,215.- 112 676-R

1,040.-

6

111 842

2,420.-

112 746

1,660.-

5

7

112 677

925.-

112 687

1,115.- 112 677-H

1,465.- 112 677-R

1,260.-

7

111 843

2,865.-

112 747

1,990.-

6

8

112 678

1,095.-

112 688

1,315.- 112 678-H

1,715.- 112 678-R

1,480.-

9

111 844

3,625.-

112 748

2,490.-

7

10

112 679

1,295.-

112 689

1,565.- 112 679-H 2,070.- 112 679-R

1,775.-

11

111 845

4,380.-

112 749

2,995.-

8

11

112 680

1,470.-

112 690

1,765.- 112 680-H 2,320.- 112 680-R

1,995.-

12

111 846

4,830.-

112 750

3,320.-

9

12

112 681

1,640.-

112 691

1,965.- 112 681-H 2,570.- 112 681-R

2,215.-

13

111 847

5,275.-

112 751

3,650.-

10

14

112 682

1,840.-

112 692

2,220.- 112 682-H 2,925.- 112 682-R

2,510.-

15

111 848

6,035.-

112 752

4,155.-

Additional mounting supports SKR500L

112 693

30.-

112 696

111 850

295.-

110 059

175.-

55.-

112 699

105.-

112 826

75.-

Mounting systems for roof-mounted collectors

SSPR Bench screw parallel

SSAR Bench screw tilted

DBPR Roof bracket parallel

2013 prices – all prices are indicated in GBP excluding VAT

DBAR Roof bracket tilted

BDPR Support plate parallel

BDAR Support plate tilted

BBALSKR45 Concrete ballast

WA45-60R Wall mounting

37

Collectors

SKR500


Roof-mounted collector

SK500-ECO-AL SK500-ECO-AL is the best solution in it’s class for roof-mounted or freestanding collector systems. The attractive, high-quality and high-performance collector withstands all types of weather.

Long lasting durability

HIgh efficiency

Several mounting options

Use of weatherproof materials ensures that the SK500-ECOAL will provide solar energy for many years. New: Mediterranean version for coastal regions.

The SK500-ECO-AL reaches high water temperatures very fast because of the highly selective vacuum absorber coating.

The flexibility of SONNENKRAFT mounting systems enables you to use the collector on almost all roof types and roof angles.

Specifications

Collector SK500N-ECO-AL

Portrait format mounting

625.-

Landscape format mounting

625.-

Portrait format mounting, for corrosive environments (e.g. costal regions)

755.-

IWS50

Corrugated connector hose; 50 cm long, 1” male/female screw connection

30.-

IWS100

Corrugated tube connecting hose, 100cm long, 1” male/ female screw connection

40.-

Silicone roof duct up to 35mm diameter, EPDM tube sleeve with roofmounting flange

25.-

111 137

Width incl. connection

011-7S190 F

011-7S1568 F

HxWxD: 2079x1239x100

HxWxD: 1239x2079x100

1257 mm

2098 mm 2.57 m

Aperture area

2.3 m2

Absorber area

2.2 m2

2

141 520

141 521

Recomm. throughput

15 to 40 l/h per m2

Collector field piping

Max. 6 units in series*

Collector glazing

140 009

Minimum 15˚, maximum 75˚

* To compensate for thermal linear expansion, expansion bends (e.g. IWS50) are needed starting with 4 collectors SK500-ECO-AL in series.

Full-surface aluminium absorber, highly selective vacuum coating

SK500N-ECO-AL SK500N-ECO-AL

Harp 95 % / 5 %

Absorption/Emission

Heat insulation

SDD

1“ screw connection male/female in top left and top right

Hydraulic design

Collector housing

111 153

10 bar

Max. operation pressure

Absorber

SK500N-ECO-AL-M

Accessories

Gross area

Connections

111 150

40 kg

Weight empty

Collector incline

SK500L-ECO-AL

F

F

Deep-drawn, salt water resistant aluminium tray 50 mm mineral wool

2079

Dimensions (mm)

SK500L-ECO-AL

2079

Solar Keymark Reg. No.

SK500N-ECO-AL

3.2 mm toughened, low iron solar safety glass

Efficiency (Aperture) ƞ0a

0.763

0.759

Heat transfer coefficient a1a

3.322

3.365

Temperature depending heat transfer coefficient a2a

0.018

0.020

1239

22

1239

22

SK500L-ECO-AL SK500L-ECO-AL F 1239

F

38

2079

22

2079

22


SK500-ECO-AL roof-mounting systems No. of collectors1)

No. of mounting supports2)

Note: Please choose the mounting system that fits your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!

Universal roof

Tiled roof

Bench screw mounting systems

Roof bracket mounting systems

parallel SSP

parallel DBP

tilted 45˚ SSA45

tilted 20˚ SSA20

tilted 20˚ DBA20

1

2

111 501

110.-

111 531

210.-

111 549

225.-

111 601

140.-

111 631

215.-

2

2

111 502

145.-

111 532

250.-

111 550

260.-

111 602

175.-

111 632

250.-

3

3

111 503

210.-

111 533

370.-

111 551

390.-

111 603

260.-

111 633

375.-

4

5

111 504

315.-

111 534

580.-

111 552

610.-

111 604

400.-

111 634

590.-

5

6

111 505

385.-

111 535

700.-

111 553

740.-

111 605

485.-

111 635

710.-

6

7

111 506

455.-

111 536

820.-

111 554

865.-

111 606

570.-

111 636

830.-

111 567

25.-

111 572

80.-

111 576

85.-

111 649

45.-

111 654

80.-

Additional mounting supports

Collectors

SK500N-ECO-AL

SK500L-ECO-AL

1

2

111 507

130.-

111 537

210.-

111 555

225.-

111 607

170.-

111 637

215.-

2

3

111 508

225.-

111 538

345.-

111 556

360.-

111 608

280.-

111 638

355.-

3

5

111 509

360.-

111 539

560.-

111 557

590.-

111 609

455.-

111 639

575.-

4

6

111 510

450.-

111 540

695.-

111 558

730.-

111 610

570.-

111 640

710.-

111 599

25.-

112 507

65.-

112 508

70.-

111 672

45.-

111 673

70.-

Additional mounting supports

No. of collectors1)

No. of BBALSK2)

Flat roof Concrete ballast mounting systems3) tilted 35˚ BBALSK35

tilted 45˚ BBALSK45

SK500NECO-AL

1

2

111 807

765.-

111 813

765.-

2

3

111 808

1,140.-

111 814

1,135.-

3

4

111 809

1,520.-

111 815

1,510.-

4

5

111 810

1,895.-

111 816

1,885.-

5

6

111 811

2,270.-

111 817

2,260.-

6

7

111 812

2,645.-

111 818

2,635.-

1) Included within each mounting systems are 2 pcs. Cu22 - R1" brazed unions per collector array. 2) The listed installation systems are designed for a maximum snow load sk from 1,25 up to 2,3 kN/m2 and a wind load from 102 of up to 150 km/h. The loads require the stated number of support members and a rafter spacing of 80 cm. For detailed information and requirements please follow the appropriate installation manual! For snow loads higher than 1,25 kN/m2 metal roof tiles are recommended! 3) Weight per concrete ballast element: 215 kg. The concrete ballast elements shall be mounted only on sufficiently load-carrying roof surface and roof subconstruction. The check of the load-carrying capacity by an expert is mandatory!

SK500L-ECO-AL

1

2

111 819

700.-

111 819

700.-

2

3

111 820

1,045.-

111 820

1,045.-

3

4

111 821

1,390.-

111 821

1,390.-

4

5

111 822

1,735.-

111 822

1,735.-

2013 prices – all prices are indicated in GBP excluding VAT

39


ON/IN-Roof mounted collector

SK400N-AL This handy collector with its 2m2 collector area can be used flexibly either on any roof or integrated into the roof cladding. The compact design enables an economic match of collector area and storage tank volume.

Long lasting durability

HIgh solar yield

Several mounting options

Use of weatherproof materials ensures that the SK400N-AL will provide solar energy for many years.

The SK400N-AL reaches high water temperatures very fast because of the highly selective vacuum absorber coating.

This versatile and easy to handle 2 m2 collector can be installed either in-roof or onroof offering total flexibility.

Specifications Dimensions (mm) Width incl. connection Weight empty

011-7S1708 F HxWxD: 2039x1039x90

1058 mm 2.12 m2

Aperture area

1,78 m

Absorber area

1,77 m2

Max. operation pressure

10 bar 15 to 40 l/h per m2 Onroof: max. 6 units in series Inroof: max. 2 units in series

Collector incline

Minimum 15˚, maximum 75˚

Absorber Hydraulic design Absorption/Emission Collector housing Heat insulation Collector glazing

Corrugated connector hose; 50 cm long, 1” male/female

IWS50 141 520

screw connection

Corrugated connector hose; 100 cm long, 1” male/female screw connection

IWS100 141 521

30.40.-

Accessories IN ROOF CUASB 110 021

1“ male/female screw connections

SDD

Full-surface aluminium absorber, highly selective vacuum coating

140 009

Copper corner connection for hard soldering roof inlets of collector field flow or return

10.-

Silicone roof duct up to 35 mm diameter, EPDM tube sleeve with roofmounting flange

25.-

Harp 95 % / 5 %

Connections

SK400N-AL

Deep-drawn, salt water resistant aluminium tray 40 mm mineral wool

F

3.2 mm toughened, low iron solar safety glass

Efficiency (Aperture) ƞ0a

0.779

Heat transfer coefficient a1a

3.914

Temperature depending heat transfer coefficient a2a

0.012 1039

40

545.-

Accessories ON ROOF

2

Collector field piping

Connections

Portrait format mounting

111 174

32 kg

Gross area

Recommended throughput

SK400N-AL

2039

Solar Keymark Reg. No.

Collector

22


SK400N-AL ON-roof mounting systems No. of collectors1)

Universal roof

No. of mounting supports2)

Tiled roof

Bench screw mounting systems

Note: Please choose the mounting system that fits your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!

parallel SSP

tilted 20˚ SSA20

Roof bracket mounting systems tilted 45˚ SSA45

parallel DBP

tilted 20˚ DBA20

SK400N-AL 2

112 903

2

2

3

3

4

110.-

112 909

225.-

112 915

112 904

140.-

112 910

255.-

112 905

200.-

112 911

365.-

5

112 906

310.-

112 912

5

6

112 907

375.-

6

7

112 908 111 570

Additional mounting structures SK400N

275.-

112 637

175.-

112 643

112 916

310.-

112 638

200.-

112 644

310.-

112 917

455.-

112 639

285.-

112 645

460.-

575.-

112 918

735.-

112 640

475.-

112 646

740.-

112 913

695.-

112 919

880.-

112 641

550.-

112 647

885.-

450.-

112 914

810.-

112 920

975.-

112 642

650.-

112 648

1,035.-

40.-

111 574

95.-

111 578

110.-

111 652

65.-

111 656

110.-

1) Included within each mounting systems are 2 pcs. Cu22 - R1" brazed unions per collector array.

280.-

Collectors

1

2) The listed installation systems are designed for a maximum snow load sk from 1,25 up to 2,3 kN/m2 and a wind load from 102 of up to 150 km/h. The loads require the stated number of support members and a rafter spacing of 80 cm. For detailed information and requirements please follow the appropriate installation manual! For snow loads higher than 1,25 kN/m2 metal roof tiles are recommended!

SK400N-AL IN-roof mounting systems No. of collectors1)

Flashings for High Profile Tiles

Flashings for Tiles

Flashings for Shingle / Slate

Note: Select the mounting system that matches to the type of roof. Other mounting options on request. Included within each mounting systems are 2 pcs. Cu22 - R1" brazed unions per collector array.

1)

Flashing colour: RAL 7016

1

112 107

550.-

112 108

450.-

112 109

375.-

2

112 110

645.-

112 111

550.-

112 112

450.-

Note: The listed installation systems are designed for a maximum snow load sk up to 2,3 kN/m2 and a wind load from 110 km/h up to 135 km/h. The loads require the included number of support members and a rafter spacing of 80 cm. For detailed information and requirements please follow the installation manual!

2013 prices – all prices are indicated in GBP excluding VAT

41


IN-Roof mounted collector

IDMK-AL The SONNENKRAFT IDMK-AL in-roof collector is directly integrated in the roof cladding and particularly suited for roofs with southern exposure. The collector is available in 5 different sizes and offer mounting options for any kind of roof tiles.

Perfect integration into roof design

Can be soldered or screwed

HIgh efficiency

The different module sizes and the option of combining roof collectors next to and above one another provides the ideal solution for every roof.

The connections are suitable both for screwing and soldering.

The IDMK-AL reaches high water temperatures very fast because of the highly selective vacuum absorber coating.

Collectors (Manual mounting)

Specifications Solar Keymark Reg. No.

IDMK12/25: 011-7S1551 F IDMK50/75/100: 011-7S1714 F

Max. operation pressure

10 bar

Recommended throughput

15 to 40 l/h per m2

Collector field piping IDMK12/25

Max. 6 pcs. in series

Collector incline

Minimum 20˚, maximum 65˚

Connections

1“ female screw connection or Cu22

IDMK12-AL 111 214

IDMK25-AL 111 213

IDMK50-AL 111 215

95 % / 5 %

Absorption/Emission

IDMK75-AL

Wood frame

Collector housing

111 216

50 mm mineral wool

Heat insulation Hydraulic design

Harp

Collector glazing

3.2 mm toughened, low iron solar safety glass 12

25

50/75/100

Efficiency (Aperture) ƞ0a

0.765

0.776

0.765

Heat transfer coefficient a1a

3.951

3.293

3.951

Temperature depending heat transfer coefficient a2a

0.011

0.011

0.011

IDMK

IDMK100-AL 111 217

F

IDMK25

F

F

IDMK100 IDMK100

2 0 5 82 0 5 8

2 0 5 82 0 5 8

F F

110 021

3681

In-roof module collector with 10.1 m2 (Aperture area: 9.28 m2; Absorber area 9.12 m2), weight: 196 kg H x W x D: 2058 x 4908 x 105 mm

2,940.-

10.-

Copper corner connection for hard soldering roof inlets of collector field flow or return

10.-

Copper corner connection for screw connection of 2 collectors mounted next to each other

15.-

4908

DM42-55 2 pc. sealing collar, 42-55mm, for

40.-

DM50-70 2 pc. sealing collar, 50-70mm, for

45.-

140 030 2 0 5 82 0 5 8

1227

2,205.-

2058

2058

2058

2058

2454

IDMK75 IDMK75

In-roof module collector with 7.57 m2 (Aperture area: 6.96 m2; Absorber area 6.84 m2), weight: 147 kg, H x W x D: 2058 x 3681 x 105 mm

Copper corner connection, for IDMK100connecting adjacent collectors by 110 006 hard soldering

KVB25

1015 1227

F F

1,470.-

CUVB

IDMK75

110 019

IDMK50 IDMK50

In-roof module collector with 5.05 m2 (Aperture area: 4.64 m2; Absorber area 4.56 m2), weight: 98 kg, H x W x D: 2058 x 2454 x 105 mm,

Accessories

CUASB F

595.-

For optional soldered connections

IDMK50

F

In-roof module collector with 2.52 m2 (Aperture area: 2.32 m2; Absorber area 2.28 m2), weight: 49 kg, H x W x D: 2058 x 1227 x 105 mm

Delivery IDMK50-100-AL only in connection with an order made for Sonnenkraft crane mounting. Metal flashings for all IDMK and mounting and hydraulic sets for IDMK12 and IDMK25 must be ordered separately. The collector backside must be adequately ventilated! We recommend using a roof foil.

Connections IDMK12

460.-

Collectors (crane mounting)

Full-surface aluminium absorber, highly selective vacuum coating

Absorber

In-roof module collector with 1.25 m2 (Aperture area: 1.10 m2; Absorber area 1.08 m2), weight: 25 kg, H x W x D: 1015 x 1227 x 105 mm

140 031

roof inlet

roof inlet

The pipe collar is made of acrylic adhesive with a permanently elastic EPDM socket. Suitable for indoors and outdoor application.

2454 2454

42

3681

4908

3681

4908


IDMK-al inroof-mounting systems No. of collectors

Mounting and hydraulic set

Note: Select the mounting system that matches the type of roof. Sheet metal flashing colour: RAL 7016

Mounting brackets, screw connections, sensor tube extension, flashing connection strips, roof battens, screws, seals, wooden wedge(s)

Tile

Roof shingle

Plain tile / Slate

Mounting and hydraulic set

High profile tile (15-65° pitch)

Mounting brackets, screw connections, sensor tube extension, flashing connection strips, roof battens, screws, seals, wooden wedge(s)

1

111 975

110.-

111 922

340.-

111 940

355.-

111 958

315.-

112 141

135.-

112 117

465.-

2

111 976

120.-

111 921

395.-

111 939

395.-

111 957

370.-

112 142

150.-

112 118

615.-

3

111 977

195.-

111 923

485.-

111 941

485.-

111 959

500.-

112 143

250.-

112 119

805.-

4

111 978

275.-

111 924

575.-

111 942

575.-

111 960

575.-

112 144

350.-

112 120

1,000.-

5

111 979

350.-

111 925

685.-

111 943

660.-

111 961

660.-

112 145

445.-

112 121

1,190.-

6

111 980

425.-

111 926

785.-

111 944

750.-

111 962

750.-

112 146

545.-

112 122

1,385.-

+1

112 100

95.-

111 909

110.-

111 912

90.-

111 915

90.-

112 140

100.-

112 114

190.-

IDMK12-AL Single-row collector fields

1

111 975

110.-

111 933

425.-

111 951

370.-

111 969

370.-

112 141

135.-

112 129

590.-

2

111 987

155.-

111 933

425.-

111 951

370.-

111 969

370.-

112 153

165.-

112 129

590.-

3

111 988

260.-

111 935

535.-

111 953

455.-

111 971

455.-

112 154

275.-

112 130

785.-

4

111 989

365.-

111 936

645.-

111 954

545.-

111 972

545.-

112 155

385.-

112 131

975.-

5

111 990

470.-

111 937

755.-

111 955

630.-

111 973

630.-

112 156

495.-

112 132

1,170.-

6

111 991

575.-

111 938

865.-

111 956

720.-

111 974

720.-

112 157

605.-

112 133

1,360.-

Dual-row collector fields (2x IDMK25)

1

111 981

265.-

111 928

530.-

111 946

555.-

111 964

555.-

112 147

270.-

112 123

665.-

2

111 982

280.-

111 927

580.-

111 945

595.-

111 963

595.-

112 148

175.-

112 124

815.-

3

111 983

465.-

111 929

695.-

111 947

720.-

111 965

720.-

112 149

480.-

112 125

1,040.-

4

111 984

655.-

111 930

940.-

111 948

840.-

111 966

840.-

112 150

670.-

112 126

1,265.-

5

111 985

840.-

111 931

1,080.-

111 949

960.-

111 967

960.-

112 151

865.-

112 127

1,490.-

6

111 986

1,025.-

111 932

1,225.-

111 950

1,080.-

111 968

1,080.-

112 152

1,055.-

112 128

1,715.-

Dual-row collector fields (1x IDMK12 and 1x IDMK25)

1

111 981

265.-

112 017

580.-

112 018

540.-

112 019

540.-

112 147

270.-

112 134

650.-

2

111 992

295.-

111 997

640.-

112 003

585.-

112 008

585.-

112 158

300.-

112 135

800.-

3

111 993

490.-

111 998

780.-

112 004

705.-

112 009

705.-

112 159

505.-

112 136

1,025.-

4

111 994

690.-

111 999

925.-

112 005

825.-

112 010

825.-

112 160

705.-

112 137

1,250.-

5

111 995

885.-

112 001

1,070.-

112 006

945.-

112 011

945.-

112 161

910.-

112 138

1,475.-

6

111 996

1,085.-

112 002

1,210.-

112 007

1,065.-

112 012

1,065.-

112 162

1,110.-

112 139

1,700.-

The listed installation systems are designed for a maximum snow load sk up to 2,7 kN/m2 and a wind load of up to 150 km/h. The loads require the included number of support members and a rafter spacing of 80 or 90 cm. For detailed information and requirements please follow the installation manual!

2013 prices – all prices are indicated in GBP excluding VAT

Special flashing IDMK - Price on request Special flashing BLXX125, 112 403 for IDMK12 / IDMK25 Note: For your special order, please send us • a sketch of the collector layout • the type of flashing (tile, roof shingle, plain tile) Delivery time: Approx. 4-6 weeks

43

Collectors

IDMK25-AL Single-row collector fields


Large size collector

GK-HP

The GK-HP collector is specially optimized for big scale installations. It can be installed fast and is easily combined to create a large scale field

value for money

reduced installation cost

HIgh efficiency

The GK-HP delivers optimum performance to the price, great for large installations.

The reduced amount of hydraulic connections and mounting structures needed per m2 collector surface, saves time and money during installation.

The GK-HP reaches high water temperatures very fast because of the highly selective vacuum absorber coating.

Specifications

Collectors - Pallet packpacking GK5-HP

Solar Keymark Reg. No.

GK10-HP

GK5-HP-VE1

011-S1878 F HxWxD: 2065x2443x113

HxWxD: 2065x4870x113

87 kg

168 kg

Gross area

5.04 m2

10.06 m2

Aperture area

4.64 m2

9.28 m2

Absorber area

4.63 m

9.26 m2

Dimensions (mm) Weight

2

Max. operation pressure

10 bar

Recommended throughput

10 to 25 l/h per m2

Collector field piping

max. 70 m2 parallel

Collector incline Connections Absorber Absorption/Emission Collector housing Heat insulation

Numbers of collectors packed on one pallet

Minimum 25˚, maximum 75˚ 4x 1 /4“ male screw connection 1

111 155

GK5-HP-VE2 111 156

GK5-HP-VE3

111 157

GK5-HP-VE4

111 158

GK5-HP-VE5

111 159

GK5-HP-VE6 111 160

GK10-HP-VE1 111 161

GK10-HP-VE2

Full-surface aluminium absorber, highly selective vacuum coating

111 162

95 % / 5 %

111 163

50 mm mineral wool Meander

Hydraulic design

Aluminium frame

Collector glazing

3.2 mm toughened, low iron solar safety glass

Efficiency (Aperture) ƞ0a

0.809

Heat transfer coefficient a1a

2.858

Temperature depending heat transfer coefficient a2a

0.015

GK10-HP-VE3 GK10-HP-VE4

111 164

GK10-HP-VE5

111 165

GK10-HP-VE6 111 166

1 x large size collector of 5 m2

2,105.-

2 x large size collectors of 5 m2

3,245.-

3 x large size collectors of 5 m2

4,770.-

4 x large size collectors of 5 m2

6,300.-

5 x large size collectors of 5 m2

7,830.-

6 x large size collectors of 5 m2

9,170.-

1 x large size collector of 10 m2

3,435.-

2 x large size collectors of 10 m2

5,860.-

3 x large size collectors of 10 m2

8,695.-

4 x large size collectors of 10 m2

11,535.-

5 x large size collectors of 10 m2

14,370.-

6 x large size collectors of 10 m2

17,025.-

Delivery time approx. 4-6 weeks.

Collectors - Container packpacking Pallet packaging for 40Ft High Cube Container Loading

GK5-HP-VC3 111 167

GK5-HP-VC4 111 168

GK5-HP-VC5

111 169

GK10-HP-VC3 111 170

GK10-HP-VC4 111 171

GK10-HP-VC5 111 172

3 x large size collectors of 5 m2

5,165.-

4 x large size collectors of 5 m2

6,625.-

5 x large size collectors of 5 m2

8,050.-

3 x large size collectors of 10 m2

8,920.-

4 x large size collectors of 10 m2

11,820.-

5 x large size collectors of 10 m2

14,695.-

Delivery time approx. 4-6 weeks.

44


MOUNTING OPTIONS BBALGK/SKR

AccessorIes

110 186

GK5/10, 60°

GK5/10-ABS 110 155

GK5/10, 45°

GK5/10-ASS

GK5/10, 30°

110 191

GK5/10-TH 110 156

GK5/10-VW A

B

C

110 157

D

KLINGER32 110 158

BBALGK/SKR 111 826

Flexible connection set for GK5HP and GK10-HP, containing 1 length compensator of 100 mm 1 1/4“ female and 2 flat gaskets KLINGER32

65.-

2 x end caps 1 1/4“ (incl. gasket) for unused connections

25.-

Connection set for GK5-HP and GK10-HP, 1 1/4 “ female and 1 gasket for 28 mm

15.-

Immersion sleeve 1 1/4 “, for accurate temperature measurement (1 pc. per field)

125.-

1 x aluminum profile for horizontal fitting of mounting support and support angle

40.5.-

1 x flat gasket 1 1/4 “ 1 pc. concrete ballast for GK-HP, weight: 285 kg

255.-

DIMENSIONS

GK10-HP

GK5-HP 130

2443

4870

GK5/10-ABS

1892

2065

GK5/10-TH F

GK5/10-ABS

GK5/10-ASS

GK5/10-VS

GK-HP roof-mounting systems Snow Load sk kN/m2

No. of mounting supports1)

GK5

up to 1.25 kN/m2

2

GK5

up to 3 kN/m2

2

GK10

up to 1.25 kN/m2

3

GK10

up to 3 kN/m

3

2

Bench screw parallel

112 901

112 902

Flat roof tilted2) 30°

225.-

360.-

1) The listed installation systems are designed for a maximum snow load sk from 1,25 up to 3 kN/m2 and a wind load up to 150 km/h. The loads require the stated number of support members and a rafter spacing of 80 to 120 cm. For detailed information and requirements please follow the specific installation manual of this product! For snow loads higher than 1,25 kN/m2 metal roof tiles are recommended!

Flat roof tilted2) 45°

112 590

180.-

112 592

185.-

112 595

240.-

112 597

255.-

112 591

245.-

112 593

255.-

112 596

335.-

112 598

360.-

Flat roof tilted2) 60°

112 594

275.-

112 599

390.-

2) The flat roof mounting sets contain mounting brackets with adjustable height. Bench screws are not included, therefore mounting srews must be ordered apart, depending on the type of roof surface/coverage.

Note: Weight per concrete ballast element: 285 kg. The concrete ballast elements shall be mounted only on sufficiently load-carrying roof surface and roof sub-construction. The check of the load-carrying capacity by an expert is mandatory!

2013 prices – all prices are indicated in GBP excluding VAT

45

Collectors

GK5/10-VS


Tanks

DHWP

PSR-E

PSC-E

PS-E

The DHWP is an easily installed hot water tank with pre-installed pump unit and controller. It’s provided with proven technology to ensure durability and efficiency.

The PSR-E tank ensures optimum stratification in the tank and fits perfectly to the series of modules from SONNENKRAFT.

With the PSC-E tank you get the best possible temperature layering during charging and discharging due to various stratification plates and external stratification via SLM50HE.

The optimal solution for storing energy at high temperatures in larger installations. It can work alone or as backup heating together with PSR-E/PSC-E.

46


Compact plus Tank

ELB The ELB hot water tank ensures a very low heat loss because of insulation sprayed directly onto the tank. A UK compliant tank with pre-fitted TPR valve and two thermostatic controllers

“Plug & Flow"

Proven technology

high efficiency

Every part and detail of the ELB is made in a way that allows you to make the installation quickly and easy.

The components and technology of the ELB is of the usual high standard of SONNENKRAFT® products.

The large heat exchanger surfaces make the tank perfect for using solar energy.

TANKS

Capacity

l

200

300

400

200

300

400

Skymantel, a CFC free insulation sprayed directly onto the tank, ensures the lowest heat loss.

200 l, 2 registers, height 1432 mm, Ø540 mm, register top 0.7 m2/bottom 0.95 m2, tilted height 1530 mm, weight approx. 85 kg

1,150.-

300 l, 2 registers, height 1,834 mm, Ø600 mm, register top 0.81 m2/bottom 1.49 m2, tilted height 1930 mm, weight approx. 120 kg

1,375.-

400 l, 2 registers, height 1631 mm, Ø700 mm, register top 1.0 m2/bottom 1.83 m2, tilted height 1745 mm, weight approx. 140 kg

1,535.-

Diameter, insulated

mm

540

600

700

Height, insulated

mm

1432

1834

1631

Tilted height

mm

1530

1930

1745

Weight

kg

85

120

140

Max. water pressure

bar

10

Max. heating pressure

bar

10

Max. solar loop press.

bar

10

Max. operating water temperature

°C

95

Max. heating system temperature

°C

110

Max. operating temp. solar loop

°C

110

Upper heating / reheating register

m2

0.70

0.81

1.00

(necessary for building regulations)

Lower heating area / solar register

m2

0.95

1.49

1.83

120 127

Solar heat exchanger volume

l

6.4

10.4

12.8

Heating system heat exchanger volume

l

4.8

5.6

6.9

Performance indicator NL top

NL/ kW

2.4 / 25

2.5 / 27

5.7 / 31

Performance indicator NL bottom

NL/ kW

4.2 / 31

4.1 / 45

9.4 / 51

ELB200R2E-H-UK 121 145

ELB300R2E-H-UK 121 146

ELB400R2E-H-UK 121 147

TANK Accessories SDHWK200

Solar domestic hot-water kit for ELB200R2E-H-UK

550.-

SDHWK300

Solar domestic hot-water kit for ELB300R2E-H-UK

695.-

SDHWK400

Solar domestic hot-water kit for ELB400R2E-H-UK

695.-

120 128 120 129

Includes: 2 motorised valves, pressure reducing valve, check valve, expansion valve, tundish and hot water expansion vessel.

ELB...R2E-H-UK Fits with the following modules

PSKRHE

See page 60

2013 prices – all prices are indicated in GBP excluding VAT

47

Tanks

ELBR2E-H-UK


hot water xl Tank

DHW/elb The DHW is a special hot water tank for special system designs, e.g. for large sized systems. The removable high effective fleece insulation jacket simplifies transport into the boiler room.

Easy INSTALLATION

Proven technology

high efficiency

The DHWP tanks allow quick and easy tank installation of the new RLGHE pump unit with high efficiency pump and presetted control unit.

The components and technology of the DHWP is of the usual high standard of SONNENKRAFT® products.

The large heat exchanger surfaces make the tank perfect for using solar energy.

TANKS

DHW750

DHW1000

R2

R2

l

733.1

863.7

Diameter, insulated

mm

970

970

Diameter, not insulated

mm

790

790

Height, insulated

mm

1816

2101

Tilted height without lid

mm

1777

2052

Weight

kg

235

254

Max. water pressure

bar

10

Max. heating pressure

bar

10

Max. solar loop press.

bar

10

Max. operating water temperature

°C

95

Max. heating system temperature

°C

110

Max. operating temp. solar loop

°C

110

Upper heating / reheating register

m

2.00

Lower heating area / solar register

m2

2.20

Solar heat exchanger volume

l

15.6

TANK with 1 register

Heating system heat exchanger volume

l

14.2

ELB1500R1*

1500 l, height 2285 mm, Ø 1000 mm (with insulation)

on request

Performance indicator NL top

NL/ kW

12 / 59.5

ELB2000R1*

2000 l, height 2550 mm, Ø 1100 mm (with insulation)

on request

Performance indicator NL bottom

NL/ kW

37 / 63

ELB3000R1*

3000 l, height 2980 mm, Ø 1200 mm (with insulation)

on request

Capacity

2

DHW750R2

DHW tank of 750 litres and 2 registers, incl. insulation

2,750.-

DHW1000R2

DHW tank of 1000 litres and 2 registers, incl. insulation

2,995.-

121 234 121 235

TANK sets Consisting of tank DHWR2 and Solar Pump unit RLGHE

DHW750R2-SET

Tank set DHW750R2 with RLGHE

3,580.-

DHW1000R2-SET

Tank set DHW1000R2 with RLGHE

3,880.-

121 243

121 244

TANK without register ELB1000*

1000 l, height 2120 mm, Ø 790 mm (with insulation)

on request

ELB1500*

1500 l, height 2285 mm, Ø 1000 mm (with insulation)

on request

ELB2000*

2000 l, height 2550 mm, Ø 1100 mm (with insulation)

on request

ELB3000*

3000 l, height 2980 mm, Ø 1200 mm (with insulation)

on request

TANK with 2 register DHWR2 Fits with the following modules HIGH EFFICIENCY

A

RLGHE

See page 55

48

ELB1500R2*

1500 l, height 2285 mm, Ø 1000 mm (with insulation)

on request

ELB2000R2*

2000 l, height 2550 mm, Ø 1100 mm (with insulation)

on request

ELB3000R2*

3000 l, height 2980 mm, Ø 1200 mm (with insulation)

on request


Comfort E Tank

PSR-E The PSR-E tank provides rapid availability of solar energy due to it's well balanced, innovative stratification design. To increase the tank volume the PSR800E can be connected to a PS800E and the PSR1000E connected to a PS1000E. 20 % heat loss reduction

Improved stratification

Return line stratification

Insulation fleece fits perfectly to the tank surface and connections, which eliminates chimney effects. Together with the patented fleece insulation caps for unused connections this results in a better performance compared to standard foam insulations.

The solar register is encapsulated, giving a faster loading of the upper part of the tank, which leads to a better use of solar heating support during the colder months of the year.

In the new PSR-E tank there is no need for a stratification plate. The return line stratification ensures an increased temperature difference in the tank.

Capacity

l

500

780

920

Diameter, with insulation

mm

850

990

990

Diameter, without insulation

mm

650

790

790

Height, with insulation

mm

1720

1780

2135

Height, without insulation

mm

1664

1688

2038

Tilted height

mm

1710

1740

2080

Weight (without insulation)

kg

110

135

160

Max. heating pressure

bar

3

Max. solar loop pressure

bar

10

Max. operating heating temp.

°C

Max. operating solar loop temp.

°C

Solar register heating surface

m2

1,7

2,3

3

Solar register volume

l

11,5

14,6

20

TANKS PSR500E

PSR-E tank of 500 litres, incl. insulation

1,550.-

PSR800E

PSR-E tank of 800 litres, incl. insulation

1,755.-

PSR1000E

PSR-E tank of 1000 litres, incl. insulation

1,905.-

121 527

121 528 121 529

TANK sets Consisting of tank PSR-E, fresh water module FWMi-CU and Solar Pump unit PSKR18HE

PSR500E-SET

Tank set PSR500E with PSKR18HE and FWM15i-CU

4,420.-

95

PSR800E-SET

Tank set PSR800E with PSKR18HE and FWM15i-CU

4,650.-

110

PSR800E30-SET

Tank set PSR800E with PSKR18HE and FWM30i-CU

4,775.-

PSR1000E-SET

Tank set PSR1000E with PSKR18HE and FWM15i-CU

4,815.-

PSR1000E30-SET

Tank set PSR1000E with PSKR18HE and FWM30i-CU

4,940.-

121 538 121 539

121 540 121 541

121 542

Note: FWM15i-VA and FWM30i-VA modules with stainless steel heat exchanger available on request.

! PSR-E incl. patented insulation caps ISOV-KAP40E

Fits with following modules HIGH EFFICIENCY

A

PSKR18HE

See page 55

2013 prices – all prices are indicated in GBP excluding VAT

FWM15i/30i See page 56

49

Tanks

PSR500E PSR800E PSR1000E


Comfort E plus Tank

PSC-E With the new PSC-E tank you get the best possible temperature layering during charging and discharging. The PSC800E can be connected to a PS800E and the PSC1000E connected to a PS1000E

Capacity

20 % heat loss reduction

Most efficient Tank

Optimal with heat pumps

Insulation fleece fits perfectly to the tank surface and connections, which eliminates chimney effects. Together with the patented fleece insulation caps for unused connections this results in a better performance compared to standard insulations.

When the PSC-E tank is combined with the new FWM and SLM50HE modules and the energy optimized RAS20 you get the most efficient solution of today.

The PSC tank has been approved for heat pump systems, thanks to the integration of an additional connection for optimised hot water charging via heat pumps.

PSC800E

PSC1000E

789

920

l

TANKS PSC800E

PSC-E tank of 800 litres, incl. insulation

1,550.-

PSC1000E

PSC-E tank of 1000 litres, incl. insulation

1,755.-

121 444

Diameter, with insulation

mm

990

Diameter, without insulation

mm

790

Height, with insulation

mm

1860

2140

Height, without insulation

mm

1778

2058

TANK sets

Tilted height

mm

1830

2100

Weight without insulation

kg

136

150

Consisting of tank PSC-E, fresh water module FWMi-CU and stratification module SLM50HE

Max. heating pressure

bar

3

Max. heating temperature

째C

95

121 445

PSC800E-SET

Tank set PSC800E with SLM50HE and FWM15i-CU

6,565.-

PSC800E30-SET

Tank set PSC800E with SLM50HE and FWM30i-CU

6,690.-

PSC1000E-SET

Tank set PSC1000E with SLM50HE and FWM15i-CU

6,640.-

PSC1000E30-SET

Tank set PSC1000E with SLM50HE and FWM30i-CU

6,760.-

121 442

121 448 121 443

! PSC-E incl. patented insulation caps ISOV-KAP40E

121 449

Note: FWM15i-VA and FWM30i-VA modules with stainless steel heat exchanger available on request

Fits with following modules

HIGH EFFICIENCY

A

SLM50HE

See page 58

A

HKM20HE

See page 59

RAS20

See page 59

HIGH EFFICIENCY

HIGH EFFICIENCY

A

A

FWM15i/30i See page 56

50

HIGH EFFICIENCY

FWM30i Cascade See page 57


backup Tank

PS-E The PS-E tank is the optimal solution for storing energy at high temperatures for larger installations. It can work both as backup heating or together with stratified charging and fresh water modules.

20 % heat loss reduction

Perfect for large installations

New combinations

Insulation fleece fits perfectly to the tank surface and connections, which eliminates chimney effects. Together with the patented fleece insulation caps for unused connections this results in a better performance compared to standard insulations.

With the ability to be set up in a parallel installation, the PS-E tank is the best choice for larger installations.

The PS800E can now both be combined with PSC800E and PSR800E, and PS1000E can be combined with PSC1000E and PSR1000E.

Capacity

PS1000E

PS1500E

PS2000E

PS3000E

PS5000E

l

789

920

1425

2006

2670

4967

mm

990

990

1200

1300

1490

1840

Diameter, not insulated

mm

790

790

1000

1100

1250

1600

Height, insulated

mm

1835

2120

2150

2410

2535

2915

Height, not insulated

mm

1775

2058

2097

2358

2435

2815

Tilted height

Diameter, insulated

mm

1830

2100

2200

2450

2590

3050

Weight without insulation

kg

121

134

170

245

295

585

Permissible heating pressure

bar

3

Permissible operating temp. heating

°C

95

accessories

Tanks

PS800E

TANKS

PVS40

Storage tank connector hose for PS800E PS1500E, 2x 1 1/2" male thread

55.-

PVS50

Storage tank connector hose for PS2000E PS5000E, 2x 2" male thread

145.-

ISOV-KAP40E

Insulation cap 6/4", square, for PSR-E, PSC-E and PS-E tanks up to 1500 l

120 026 120 135 121 970

5.-

PS800E

PS-E tank of 800 litres, including insulation

1,230.-

PS1000E

PS-E tank of 1000 litres, including insulation

1,315.-

PS1500E

PS-E tank of 1500 litres, without insulation

1,275.-

PS2000E

PS-E tank of 2000 litres, without insulation

1,675.-

PS3000E

PS-E tank of 3000 litres, without insulation

2,275.-

PS5000E

PS-E tank of 5000 litres, without insulation

4,725.-

121 433

121 434 121 435

121 436 Can be used as an extension of COMFORT E and COMFORT E Plus systems.

Fits with following modules

121 437

121 438

INSULATIONS HIGH EFFICIENCY

HIGH EFFICIENCY

ISOVPS1500 121 957

Insulation for PS2000E, insulation

A

A

FWM150/225

SLM120/200

See page 57

Insulation for PS1500E, insulation thickness 100 mm

See page 58

ISOVPS2000 thickness 121 958

100 mm Insulation for PS3000E, insulation

HIGH EFFICIENCY

HOCHEFFIZIENZ

ISOVPS3000 thickness 121 959

120 mm Insulation for PS5000E, insulation

A

FWM30i Cascade See page 57

2013 prices – all prices are indicated in GBP excluding VAT

A

SLM50HE

ISOVPS5000 thickness 121 960

120 mm

745.795.895.1,415.-

Siehe Seite 58

51


TAnk and module overview HIGH EFFICIENCY

Now all solutions with high efficieny pumps!

DHW

PSR-E

PSC-E

PS-E

Wall mounting possible

PLUS X Award achieved for module FWMi

A

Pumpstations RLGHE

PSKRHE

PSKR18HE

PSKR18HE-O

Stratification modules SLM50HE

SLM50HE-O

SLM120

*

SLM200

*

Freshwater modules FWM15i-CU FWM30i-CU

***

FWM15i-VA FWM30i-VA

***

**

**

FWMi Cascade

**

FWM150

*

FWM225

*

**

Heating modules

52

HKM20HE

HKM20HE-O

RAS20

*....... ground mounted, perfect extension system solutions with PSC-E and PS-E **..... wall- or tank-installation or mixed installation, fits to system solutions with PSR-E, PSC-E and PS-E ***.... with wall mounting kit


Tanks 2013 prices – all prices are indicated in GBP excluding VAT

53


Modules

HIGH EFFICIENCY

Now all solutions with high efficieny pumps!

PLUS X Award achieved for module FWMi

A

pskr18HE

fwm15i/30i

slm50HE

Ras20

The PSKR18HE with high efficiency pump is used in combination with the PSR-E-tank for charging the tank using solar energy. It can produce fresh hot water in combination with the FWMi and can support heating systems.

Tomorrow's solution is here today. FWMi, the fresh water module is intelligent, with high effiency pumps and works with any type of water quality. No hot water storage required. Hygienic solution that prevents development of legionella. NEW: Cascade up to 120 l/min.

The SLM50HE is used in combination with PSC-E-tank for stratified charging the tank using solar energy. HE-pumps and heat metering are already included.

RAS20 is a heating module which supports the oil/gas condensing boiler with solar energy, and improves the efficiency of the heating system. It works specially well with retrofit solutions, when installing solar in combination with traditional heating solutions.

54


Pump stations

RLGHE

The RLGHE is used in combination with DHW-tank for charging the tank using solar energy.

HIGH EFFICIENCY

A

quick Installation

Easy operation

Nice Design

The Solar Pump and controller are pre-assembled and the module has reduced tubing and connections. New: pre-installed on the COMPACT E tank!

The controller has few buttons because of automatic operation and requires low maintenance.

The new module is compact and in a modern design that fits every home.

Specifications

Pumping station 180 x 600 x 200 mm

Flow solar circuit

1-13 l/min

Delivery height of Solar Pump

8.5 m

Collector area up to approx.

131 326

˜25 m max 6 bar 2

Operating pressure Operating temp. (Flow/Return)

RLGHE

1-line solar station consisting of: high efficiency solar pump Grundfos Solar PM2 15-105, ball valves incl. gravity brake, safety valve (6 bar), 1 thermometer and 1 manometer, flow indicator, air vent, 2-circuit solar control SKSC2HE unit incl. 2 PT1000 sensors, cap valve 3/4” female, testing or emptying

max. 140° C / max. 110° C

Collector connections

Compression fitting ø 22 mm

Tank connections

External thread G 3/4 flat seal

pskr18HE HIGH EFFICIENCY

The PSKR18HE is used in combination with the PSR-E-tank for charging the tank using solar energy. It can produce fresh hot water in combination with the FWMi and it can support heating systems.

New controller

High operating range

High efficiency pumps

Easy and intuitive operating panel.

The PSKR18HE ensures perfect flow rate at all times, up to 13 l/min.

The PSKR18HE comes with a high efficiency pump and reduces running costs by up to 80% in comparison to standard pump units.

A

Specifications Dimensions WxHxD

PSKR18HE

PSKR18HE-O

1-13 l/min

Delivery height of Solar Pump

8.5 m

Collector area up to approx.

25 m2

Operating pressure Collector connections Tank connections

Pumping stations

465 x 570 x 275 mm

Flow solar circuit

Operating temp. (Flow/Return)

575.-

PSKR18HE 131 327

max. 6 bar max. 140° C / max. 95° C Compression fitting ø 22 mm

Modules

Dimensions WxHxD

PSKR18HE-O 131 328

2-line solar station consisting of: high efficiency pump Grundfos Solar PM2 15-105, 2 ball valves incl. gravity brake, safety valve (6 bar), 2 thermometers and 1 manometer, flow indicator (VFD sensor, 1-12 l/min), air vent, 2-circuit solar control SKSC2HE unit incl. 4 PT1000 sensors, cap valve 3/4” female, testing or emptying

875.-

Like PSKR18HE, but without controller

695.-

External thread G 1 flat seal

2013 prices – all prices are indicated in GBP excluding VAT

55


Fresh water modules

FWM15i/30i

Tomorrow's solution is here today. FWMi, the most intelligent fresh water module on the market with high effiency pumps works with any type of water quality. No hot water storage required which prevents development of legionella.

New plate heat exchanger

High efficiency pumps

Intelligent circulation pump

Copper brazed for “normal” water qualities. Stainless steel brazed for harsh water qualities. The intelligent flow control insures resistance to corrosion and scaling.

The Grundfos Alpha Pump is the brain of the module. It collects input data from all sensors and controls all basic functions in the FWMi.

The optional circulation pump can learn when the household needs hot fresh water and supplies the correct quantity right on time. There by saving energy.

HIGH EFFICIENCY

A

specifications

Fresh water modules FWM15i

FWM30i

Width

465 mm

Height

568 mm

Depth

312 mm

Weight without insulation Delivery rate Temperature range

FWM30i-CU 15.7 kg

1-15 l/min

2-30 l/min

30-65 (80)°C 2) 90°C

Maximum allowable pressure in tank

3 bar

Maximum allowable temperature of fresh warm water

131 120-C

11.9 kg

Maximum allowable water temperature in tank

65 (80)°C

Minimum pressure in cold water supply line

2 bar

Maximum allowable pressure in cold water supply line

10 bar

FWM15i-CU

131 118-C

FWM15i-VA 131 119-C

FWM30i-VA 131 117-C 2)

1)

FWM15i-CFK/ FWM30i-CFK 130 456-C-VM

1) The minimum pressure of 2 bar is required to achieve the specified delivery rate 2) In case of thermal disinfection

FWMi-WMS 130 501

Recommendation For a quick material selection (CU- or VA-soldering of the heat exchanger plates) use the following selection (for a detailed overview please use the product data sheet FWMi): If the concentration of one of the indicated water-contents is higher than mentioned to the right, the FWM15i/30i-VA has to be used.

Free Chlorine Cl2 > 1 mg/l Total water hardness > 30 °dH

OR If the concentration of two of the four indicated water-contents is higher than mentioned to the right, the FWM15i/30i-VA has to be used.

Sulphate SO42 > 70 mg/l Chloride Ionen Cl > 300 mg/l pH-value < 7,5 or > 9,0 free CO2 > 5 mg/l

In case of uncertainty please look at the detailed tables in the technical data sheet or contact your SONNENKRAFT® service center. All concentrations in mg/l or ppm.

56

15 litres module incl.: 4 insulation parts, pipe connecting kit, hygienic perfect continuous flow principle, copper brazed PHE

1,440.-

30 litres module incl.: 4 insulation parts, pipe connecting kit, hygienic perfect continuous flow principle, copper brazed PHE

1,550.-

15 litres module incl.: 4 insulation parts, pipe connecting kit, hygienic perfect continuous flow principle, VAbrazed PHE for harsh water qualities

2,155.-

30 litres module incl.: 4 insulation parts, pipe connecting kit, hygienic perfect continuous flow principle, VAbrazed PHE for harsh water qualities

2,550.-

Recirculation pump unit for all FWMi versions, perfect integratable and with wireless communication to the FWMi-module, operating modes: self learning mode, 24h on, thermostatic controlled tapping + 5 min, manual timer programming. Delivery height adjustable in 3 steps from 1 to 6m

735.-

Wall mounting set for FWM15i/30i without recirculation pump, consisting of wall insulation, wall mounting bracket and corrugated pipe connectors

595.-


Fresh water moduleS

FWM30i-CascadE

With the new FWMi-Cascade up to 4 FWM30i can be installed in parallel. So SONNENKRAFT has the optimum solution for the hot water production for all middle to large scaled projects up to ~120 l/min delivery rate.

A

EffiCient sizing

Easy extension

Security of supply

The sizing of a FWMi cascade can be done very precisely to reach the real hot water demand very exactly and to achieve the highest level of economic efficiency.

An unexpected increase in hot water demand in the future can be met easily by extending the cascade.

The FWMi cascade ensures security of hot water supply during maintenance. A precise sizing up to the actual hot water demand avoids lime and corrosion.

Fresh Water Module Cascade - Sets Delivery rate (65 °C)

Fresh water modules CASCADE

Incl. 1 recirc.

Without recirc. pump

6,425.-

6,195.-

Wall Mounting 2 x FWM30i-CU

2 - 60 l/min

3 x FWM30i-CU

2 - 90 l/min

4 x FWM30i-CU

2 - 120 l/min

131 121

131 124

9,295.-

9,065.-

131 122

131 125

11,995.-

11,765.-

131 123

131 126

4,765.-

4,535.-

131 127

131 130

6,780.-

6,550.-

Tank Mounting (on PSC-E) 2 x FWM30i-CU 3 x FWM30i-CU 4 x FWM30i-CU

2 - 60 l/min 2 - 90 l/min 2 - 120 l/min

131 128

131 131

8,795.-

8,565.-

131 129

131 132

Note: For a profound dimensioning of FWM30i cascades please contact the SONNENKRAFT Sales Team

FWMi-WMS 130 501

FWMi-WMS-CFK 130 572

Wall mounting set for FWM15i/30i without recirculation pump, consisting of wall insulation, wall mounting bracket and corrugated pipe connectors

595.-

As FWMi-WMS (130 501) but for FWMimodules containing a recirculation pump

625.-

Fresh water module - REcirculation Update FWMi-C-EXT 130 580

Wall mounting extension set, for upgrading existing wall mounted FMW15i/30i (131117-120-C) modules with a recirculation pump (order recirculation pump 130456 separately)

345.-

Fresh Water Module Cascade - Single Items FWMi-C 130 570

FWMi-C-CFK 130 571

FWMi-C-V 130 589

FWM150/225

Cascade set consisting of cascade valve, mounting rail, ball valves and accessories for mounting one FWM30i without recirculation pump

745.-

As FWMi-C (130 570) but for FWMimodules containing a recirculation pump

785.-

Cascade valve (1 pc. per FWM30i, for cascade self-installation without wall mounting sets and cascade sets, max. 4 FWM30i per cascade)

225.-

The freshwater module ensures hygienic hot water without scaling and with minimal stand-by losses.

High efficiency

Good hygiene

Ec0nomic operation

The module has rapid reaction times without over- or undershooting the preset dispensing temperature.

The fresh water module ensures no risk of legionella.

The speed controlled charging and circulation pump saves energy.

Specifications

Fresh Water modules

FWM150

FWM225

FWM150

Delivery 40°C

150 l/min

225 l/min

131 102

Fresh water module for hot water preparation, 150 l/min, 320 kW

12,735.-

Delivery 55°C

100 l/min

150 l/min

FWM225

15,020.-

320 kW

500 kW

Fresh water module for hot water preparation 225 l/min, 500 kW

Heat exchanger transfer capacity Hot water outlet, partial load Hot water outlet, full load

2013 prices – all prices are indicated in GBP excluding VAT

Modules

HIGH EFFICIENCY

131 103

58 - 60°C 55°C

57


stratification modules

slm50HE HIGH EFFICIENCY

The SLM50HE is used in combination with PSC-E-tank for stratified charging the tank using solar energy.

Controller with many functions

Higher efficiency

easy installation

The innovative controller has a full graphic display and an easy operating panel. SD-card can be used for data logging.

The SLM50HE guarantees an optimal stratification. There is an automated hydraulic balance of the solar system. And integrated heat quantity measurement via flow sensor.

The placement of the hydraulic connections in the bottom and the “click system” makes the new SLM50HE very easy to handle.

A

Specifications

Stratified charging modules mm

HxWxD: 850x470x285

kg

approx. 25

l/min

2-40

Delivery height of Solar Pump

m

7.5

Collector area up to approx.

m

50

bar

max. 6

Dimensions Weight Flow

2

SLM50HE 131 217

SLM50HE-O 131 219

Stratified charging module with high efficiency pumps, high performance heat exchanger, diverter valve for optimum stratification, for PSC tank and wall mounting, solar pump:Grundfos Solar PM2 15-75

2,870.-

Stratified charging module with high efficiency pumps, for PSC tank and wall mounting, without controller

2,450.-

MAXIMUM OPERATING PRESSURE Collector circuit / Buffer circuit

SOLAR PUMP / BUFFER LOADING PUMP Nominal voltage

VAC/Hz

230 / 50

Nominal output

W

4 - 70

Max. delivery height

m

0.3 - 7.5

SLM120/200 Antifreeze protection

High solar yield

Efficiency focus

The bypass pipe in the solar circuit secures that the system doesn’t freeze.

The SLM120/200 enables stratification charging of the backup tank

The speed controlled charging pump and the fully insulated housing saves energy.

Specifications

Stratified charging modules slm120

Dimensions (HxWxD)

1150 x 780 x 430

kg

85

Spread, primary / secondary

°C

60 - 35 / 29 - 54

Flow, primary / secondary

kg/s

0.660 / 0.575 1.106 / 0.958

Pressure loss, prim. / sec.

kPa

26 / 22

Piping (Solar / Backup)

58

mm

slm200

Weight

Capacity

The large-scale stratified charging module from SONNENKRAFT® allows solar stratified charging of large backup tanks.

kW "

95

60 kW

100 kW

2" / 6/4"

Permitted operating temp.

°C

min. 2 / max. 95

Permitted operating pressure

bar

Solar: 6 / Heating: 3

SLM120

Stratification module for collector surfaces from 50 to 120 m2 (gross), 60kW

8,495.-

SLM200

Stratification module for collector surfaces from 120 to 200 m2 (gross), 100 kW

9,750.-

131 209 131 210

Pump specifications Rated voltage

V / Hz

Power consumption

kw

0.4 / 0.177

230 / 50

Max current consumption

A

2.02 / 0.85

Max. delivery height

kPa

113 / 39


Heating modules

hkm20HE

The HKM20HE is used to support the floor heating and/or radiator heating system with solar heat.

Unique mounting options

HIGH EFFICIENCY

The HKM20HE can be mounted The HKM20HE comes with a directly on the PSC-E tank or it high efficiency pump, which can be wall mounted. requires 80% less energy to run a heating circuit than standard pumps of this type.

A

635 x 255 x 225 mm 9 kW (∆t 10K) - 18 kW (∆t 20K)

Delivery height of circulation pump

Heating circuit module for one weather controlled heating circuit, incl. high efficiency pump Grundfos Alpha 2, mixing valve and SKSCEM1 control unit with 1 outdoor sensor, 1 supply line sensor and 1 V-Bus cable

1,135.-

131 222

Like HKM20HE, but without control unit

895.-

HKM20/ RAS20-WMS

Wall mounting kit for HKM20/RAS20

95.-

HKM20HE 131 221

6m 4

Kvs Operating pressure

max. 3 bar

Operating temperature

max. 115° C

Tank connections

The powerful pump enables bridging over larger pressure losses in the system.

Heating circuit modules

Dimensions H x W x D

Heating circuit connections

More delivery height

Compression fitting ø 22 mm External thread G 1 flat seal

RAS20

HKM20HE-O

130 522

Modules

Specifications Heat output (vmax 1 m/s)

High efficiency pump

RAS20 is a heating module which supports the oil/gas condensing boiler with solar energy. The mixing valve and the controlled operation make the solar energy last much longer. It works especially well in retrofit solutions, when installing solar in combination with traditional heating solutions. Unique mounting options

Optimal efficiency

compensated return increase

The RAS20 can be mounted directly on the PSC-E tank or it can be wall mounted (for retrofit systems).

The RAS20 guarantees the optimal efficiency using solar energy for the heating system. The statification in the tank is not disrupted.

The oil/gas condensing boiler is only supplied with exactly as much heat as needed. The result is a minimum fuel bill.

Specifications Dimensions H x W x D Heat output (vmax 1 m/s)

635 x 255 x 225 mm 9 kW (∆t 10K) - 18 kW (∆t 20K) 4

Kvs Operating pressure / temperature Heating circuit connections Tank connections

max. 3 bar / max. 115° C Compression fitting ø 22 mm External thread G 1 flat seal

2013 prices – all prices are indicated in GBP excluding VAT

Efficiency improving module RAS20 131 325

HKM20/ RAS20-WMS 130 522

Heating module to increase the efficiency of condensing boilers through solar energy, incl. 3 sensors

835.-

Wall mounting kit for HKM20/RAS20

95.-

59


Additional pumping stations Pumping station PSKRHE

Accessories

Consists of: Solar pump PM 2 15-85, ball valves with integrated gravity brake, safety valve - 6 bar, 2 thermometers and 1 manometer, flow indicator 1-13 l/min, air vent, 2-circuit solar control SKSC2 unit incl. 4 PT1000 sensors, for mounting on wall, cap valve 3/4” female, testing or emptying

PSKRHE 131 320

Solar Pumping station with high efficiency pump, up to approx. 50 m2 collector surface, for mounting on wall

875.-

60.-

ZWV20

2-way motor valve 3/4”, closed when power is off (not shown)

90.-

ZWV25

2-way motor valve 1”, closed when power is off (not shown)

95.-

130 089

Consists of: solar pump, return line ball valve with integrated gravity brake, solar safety valve 6 bar, thermometer and manometer, 1 flushing and filling valve, flow indicator 1-13 l/min, expansion tank connection set, connections with clamping ring screw for Cu22, for wall mounting

131 301

Gravity brake for system heights > 11 m

130 003

130 004

Pumping station, 1-line insulated

RLGP2270

SKBRLG

320.-

With ST 20/6 Solar Pump

Pump sets Consists of: circulation pump, pump ball valves including screw pipe joint, check valve, thermometer and clamping ring screw connections Cu22 (or 3/4“ female threads for PS209), incl. insulation

PS2570 131 402

PS209

Pumping station, 2-line insulated

131 413

Consists of: solar pump, 2 return line ball valves with integrated gravity brake, solar safety valve 6 bar, 2 thermometers and 1 manometer, 1 flushing and filling valve, air vent, flow indicator 1-13 l/min, expansion tank connection set, connections with clamping ring screw for Cu22, for wall mounting

PS25TW

RLGZ2270 131 302

370.-

With ST 20/6 Solar Pump

Expansion pumping station 1-line insulated

131 303

RLG-E-VSK 130 049

290.-

With ST 20/6 Solar Pump

40.-

60

535.-

Drinking water pump set with star pump Z25/6-1

400.-

PS3010S

Pump set with Stratos 30/1-12 EM pump

1,340.-

PS30TWS

Domestic water pump set with pump Stratos Z 30/1-12 EM

2,080.-

131 408

Large-scale pumping stations RLGz* 182 326

RLGZ200 Cu10 - Cu18/Cu22 up to approx. 7.5/12,2 m2

Cu18 - Cu22 up to approx. 25 m2

182 333

RLGP2270

182 336

RLGZ2270

RLG-E2270

Pipe dimensions Collector size

Pump set with pump ST 20/9

Large-scale pumping stations*

RLGZ100

Connection set for 2 collector fields

370.-

Consists of: energy saving circulation pump, pump ball valve incl. union and non return valve

131 407

For an additional load or 2 collector arrays, can be combined with RLGP and RLGZ; incl. connecting set for two consumers

RLG-E2270

131 405

Pump set with Yonos PARA 25/6-3

DMS25 * Delivery time on request

Solar Pumping station DN25, pump UPS 25-80, for large scaled collector fields

1,145.-

Solar Pumping station DN32, pump TOP S 30/10-3, for large scaled collector field

1,205.-

Flow volume meter for RLGZ100

85.-


ACCESSORIES

Solar and heating control units 145.-

3-circuit control unit, 3 speed-controlled and 1 floating output, 8 sensor inputs, 2 outputs to control high efficiency pumps (PWM-signal) SD memory card, 2 inputs for flow sensor, 2 integrated heat meter, graphic display, 13 selectable installation programs (included in delivery; 6 sensors)

330.-

Heating circuit module for SKSC3+ control units, for a weather-controlled heating circuit (with a weekly timer switch and HW priority, max. 3 pcs. per SKSC3+ control unit). Incl. flow and outdoor sensor, 5 outputs for recirculation pump, 3-way-diverter valve, external auxiliary heating for hot water and heating and 1 floating output; 6 sensor inputs (included in delivery: outdoor sensor, supply line sensor, V-Bus cable) V-Bus connector conductor and V-Bus cable

215.-

SKSCRAS

2 outputs to control a 3-way valve, 3 sensor inputs, Vbus, (included in delivery: 2 sensors).

340.-

SKSRTA11

Remote control unit for SKSCEM1, for adjusting heating curves

45.-

SKSLAN-A

Interface adapter V-Bus-LAN for SKSC2HE and SKSC3+ incl. software programming and visualisation of the system data

175.-

SKSGFR

Solar cell for SKSC3+, for recording the current solar irradiation

85.-

SKSRDL2 141 147

Data logger for SKSC2HE, SKSC3+ and SKSWMZ2 incl. software and system monitoring.

455.-

SKSCAM

Alarm module for SKSC2HE and SKSC3+

95.-

SKSSD3

Smart display for SKSC2HE and SKSC3+

290.-

141 182

SKSC3+ 141 170

SKSCEM1 141 185

141 186 SKSC2HE

SKSC3+

141 105

SKSC2HE

SKSC3+

HE pump drive

Speed-controlled semiconductor relay units

2

3

Floating standard relay outputs (additional)

1

Sensor inputs

4

8

GF Vortex Sensor inputs

1

2

Inputs for irradiation sensor

1

Impulse input for volume measuring instrument

1

SD Card slot Heat quantity measurement/ calculation SK-V Bus communication interface

/

/

 3

Heating circuit module (optional) Data logger/PC reading (optional) Languages

D/GB/I/F

D/GB/I/F/E

141 187

141 112

141 140 141 171

SSA-C 141 167

70.-

GEneral accessories SKSPT1000K

Temperature sensor for collectors with PT1000 characteristics Ø 5.5 mm, 27 mm

15.-

SKSPT1000S

Temperature sensor for tanks with PT1000 characteristics Ø 6 mm, 45 mm

15.-

SKRTH

Immersion tube, chromed, incl. cable gland, inner diameter 6.5 mm

10.-

SBATHE

141 106 141 107

141 109

Requirement function (T function deactivated)

VBus/PWM 0-10V interface to control HE pumps, for SKSC2HE and SKSC3+

Min. temp. for heat sources

141 110

Immersion tube for swimming pools, stainless steel, for use in chlorinated water

110.-

Max. temp. for heat consumer

SKSRÜS

Overvoltage protector for collector sensors

25.-

Excess temp. for heat sources

Emergency shut-off

Recooling

Antifreeze

Legionella protection

Reheating/circulation

Operating days counter for control unit Operating hours counting for relay

 

141 113

Heat volume meters Heat volume meter, bus connection to SKSC3+ and SKSRDL, up to approx. 150 m2 collector surface area incl. display module, 2 temperature sensors, 2 immersion sleeves SKSRV25 and volume gauge 2,5 m3/h

515.-

SKSRV06

Volume measuring instrument V40-25 for SKSWMZ2 up to approx. 25 m2 collector surface area

225.-

SKSRV25

Volume measuring instrument V40-25 for SKSWMZ2 up to approx. 150 m2 collector surface area

225.-

Heat volume meter up to approx. 30 m2 collector surface area, incl. display module, 2 temperature sensors, 2 immersion sleeves and volume gauge 1.5 m3/h

280.-

SKSWMZ2 141 146

141 114

141 115

Recording of local irradiation Common circuits with priority logic

Parallel operation of relay outputs

2013 prices – all prices are indicated in GBP excluding VAT

Accessories

CONTROL UNITS

2-circuit control unit, 2 temp. difference outputs, 2 outputs to control high efficiency pumps (PWM-signal), 4 sensor inputs and 1 input for GF Vortex-sensor, 10 selectable installation programs (included in delivery; 4 sensors; V-bus connector conductor

SKSC2HE

SKSWMZ-ECO 141 122

61


ACCESSORIES

heat exchangers

Plate heat exchangers Stainless steel plates copper soldered, including insulation High Flow Types: for solar in the heating return or system isolation. PWT20 141 201

PWT30

Pressure losses PWT/PWTS

141 203

Installing a plate heat exchanger before the chlorine feed of a swimming pool circuit. Not suitable for aluminium pools or salt water. Attention: Avoid overheating the swimming pool side! Limit the solar side temperature with a fixed value control (55°C) or else switch off the Solar Pump by means of a safety thermostat (55°C) in the plate HE. Never allow the Solar Pump to run with the swimming pool pump switched off!

PWT40 141 205

PW T5 0

40 S PW T

40

40

T 0 T2 PW

PW

SB

0S T8 PW 0 T5 PW SB

30

0 500

1000

Type

1500

2000

heighT

2500

3000

3500

Width

4000

4500

Depth

5000

5500

Weight

6000

6500

7000

Connection (Solarsecondary)

Up to approx. 30 m2 collector surface area

680.-

PWT40S

Up to approx. 50 m2 collector surface area

820.-

PWT50S

Up to approx. 70 m2 collector surface area

995.-

PWT80S

Up to approx. 120 m2 collector surface area

1,445.-

PWTA

Connections for plate heat exchangers, 4 pcs., suitable for Cu22 and Cu28

100.-

Holder for plate heat exchanger

50.-

141 211

PWTH 141 222

Swimming pool Heat Exchanger SBPWT20 141 217

PWT20

358

187

125

4.7

1”-1”

PWT30

358

187

171

6.3

1”-1”

PWT40

358

187

171

7.9

1”-1”

PWT20S

686

187

123

6.7

1”-1”

141 218

PWT30S

686

185

123

8.8

1”-1”

SBPWT50-ISO

PWT40S

686

185

169

12.2

1”-1”

PWT50S

686

185

169

15.6

1”-1”

PWT80S

672

168

168

22.4

1”-1”

SBPWT20

338

169

143

7.5

1”-5/4”

SBPWT50

574

169

189

16.4

1”-5/4”

SBPWT50 141 219

SBPWT20-ISO

141 220

SBPWTA 141 226

SBS20 141 403

SBS50 141 401

62

540.-

PWT30S

141 221

Flow volume in l/h

Up to 40 m2 collector surface area

570.-

141 215

10

435.-

Up to approx. 20 m2 collector surface area

141 213

20

Up to 30 m2 collector surface area

PWT20S

141 209

S PW T3 0

20 PW T

30S PW T

PWT 20S

Pressure loss in kPa

50

405.-

Low Flow: for stratified charging or tank to tank transfer 141 207

60

Up to 20 m2 collector surface area

Up to 20 m2 collector surface area

495.-

Up to 50 m2 collector surface area

975.-

Insulation for SBPWT20

140.-

Insulation for SBPWT50

140.-

Connection for SB plate heat exchanger, 2 pcs, suitable for Cu 22 and Cu 28

50.-

Swimming pool set, up to 20 m2 collector surface area, consisting of swimming pool heat exchanger SBPWT20, pump set PS2570 and threeway set value control DWF25

1,360.-

Swimming pool set, up to 50 m2 collector surface area, consisting of swimming pool heat exchanger SBPWT50, pump set PS209 and threeway set value control DWF25

2,005.-


ACCESSORIES

flexible stainless steel pipes Quick pipe laying for solar systems for indoor and outdoor usage. 2 corrugated stainless steel pipes including sensor line, fully insulated in closed-cell rubber.

Solar circuit

DN 16 stainless steel corrugated hose set, 10 lfm

285.-

EWSID16-15

DN 16 stainless steel corrugated hose set, 15 lfm

395.-

EWSID16-20

DN 16 stainless steel corrugated hose set, 20 lfm

540.-

EWSID16-50

DN 16 stainless steel corrugated hose set, 50 lfm

1,345.-

EWSID20-10

DN 20 stainless steel corrugated hose set, 10 lfm

325.-

EWSID20-15

DN 20 stainless steel corrugated hose set, 15 lfm

485.-

EWSID20-20

DN 20 stainless steel corrugated hose set, 20 lfm

640.-

EWSID20-50

DN 20 stainless steel corrugated hose set, 50 lfm

1,495.-

141 501

141 502

141 503

182 429

Collector connection set

or ct

le

l Co

EWSID16-10

141 504 141 505 Expansion tank connection set ASAG

141 506

182 430

Delivery time for EWSID16-50 and EWSID20-50 is 15 days

ASSKR500-16

DN 16 SKR500 connection set, transitions to 2x1” female and 2x CU22

56.-

ASSKR500-20

DN 20 SKR500 connection set, transitions to 2x1” female and 2x CU22

74.-

ASIDMK-16

DN 16 IDMK connection set, transitions to 2x1” male and 2x CU22

60.-

ASIDMK-20

DN 20 IDMK connection set, transitions to 2x1” male and 2x CU22

70.-

ASSK500-16

DN 16 SK500 connection set, transitions to 1” female/1” male and 2x CU22

58.-

ASSK500-20

DN 20 SK500 connection set, transitions to 1” female/1” male and 2x CU22

75.-

DN 16 MAG connection set for expansion tanks (AGS), transitions to 2 x 3/4” female, 1 x bow 3/4” female/male

20.-

DN 20 MAG connection set for expansion tanks (AGS), transitions to 2 x 3/4” female, 1 x bow 3/4” female/male

20.-

EWSIDM16

Clamp set consisting of 4 oval pipe clamps, anchors and bench screws for DN 16

25.-

EWSIDM20

Clamp set consisting of 4 oval pipe clamps, anchors and bench screws for DN 20

25.-

EWSIDK-16

Coupling set consisting of 2 couplings DN 16 - DN 16 for extending EWSID16

45.-

EWSIDK-20

Coupling set consisting of 2 couplings DN 20 - DN 20 for extending EWSID20

60.-

ASCU16

Copper connection set: DN16 Cu22 connection (2 pieces)

50.-

141 592 Buffer tank with connection to expansion tank and collectors

1

141 593

141 509

2

141 510

141 507

3

141 508

4

ASAG-16 141 511

ASAG-20 141 512

141 513

Dimensioning EWSID: Maximum possible collector surface areas per collector field: (The number of collectors can be increased by wiring the collector fields in parallel.)

141 514 141 515

Ø

length

Collectors

DN 16

10 m

5 pcs.

DN 16

15 m

5 pcs.

SK500L-ECO-AL

DN 16

20 m

5 pcs.

(connected in series)

DN 20

10 m

6 pcs.

ASCU20

DN 20

15 m

6 pcs.

141 533

Copper connection set: DN20 Cu22 connection (2 pieces)

55.-

DN 20

20 m

6 pcs.

641 500 06

DN 16 x 22 mm cylindric joint

15.-

DN 16

10 m

4 pcs.

641 500 07

DN 20 x 22 mm cylindric joint

20.-

DN 16

15 m

4 pcs.

140 045

DN 16 x 1" female thread, flat sealing

20.-

DN 16

20 m

4 pcs.

DN 20

10 m

6 pcs.

140 041

DN 20 x 1" female thread, flat sealing

30.-

641 500 04

DN16 x 1" male thread, flat sealing

20.-

140 033

DN20 x 1" male thread, flat sealing

20.-

SKR500

(connected in parallel)

SK500N-ECO-AL IDMK25 (connected in series)

DN 20

15 m

6 pcs.

DN 20

20 m

6 pcs.

Design data in the table are based on 30 l/m2/h, ST 20/6 pump, max. level, water/FS antifreeze concentrate = 60 %/40 %, 40°C. 30 % of the regular (straight) pressure loss is used to compensate the pressure loss in pipe bends and 50 mbar for the solar station and tank. 2013 prices – all prices are indicated in GBP excluding VAT

141 516

141 532

63

Accessories

Accessories


ACCESSORIES

COMPONENTS Antifreeze for flat plate collectors Coll. surface area

Antifreeze for flat plate collectors

Antifreeze (l)

Propylene glycol, food safe and bio-degradable, with corrosion protection. Concentrate for flat plate collectors, white, clear liquid.

2.5 m2

5

5 m2

10

7.5 m2

15

140 004

10 m2

20

FS10

2

15 m

25

30 m2

30

40 m2

35

FS05

140 005

FS200 140 021

Required concentrate volume when mixing 40 vol.-% AF with 60 vol.-% water (up to n.a. 24°C) (Values apply for approx. 30 m Cu22)

5 l container

35.-

10 l container

70.-

200 l container

1,395.-

Expansion tanks For solar hot and cooling water systems, max. operating pressure 10 bar, max. operating temperature 70°C (at the membrane), wall mounting up to AG25S included, AG33S with support bracket

AG8S

Capacity 8l, admission pressure 2,5 bar, connection 3/4“, male thread

37.-

AG18S

Capacity 18l, admission pressure 2,5 bar, connection 3/4“, male thread

53.-

AG25S

Capacity 25l, admission pressure 2,5 bar, connection 3/4“, male thread

63.-

AG33S

Capacity 33l, admission pressure 2,5 bar, connection 3/4“, male thread

85.-

AG50S

Capacity 50l, admission pressure 2,5 bar, connection 3/4“, male thread

145.-

AG80S

Capacity 80l, admission pressure 2,5 bar, connection 1“, male thread

185.-

AG100S

Capacity 100l, admission pressure 2,5 bar, connection 1“, male thread

230.-

AG140S

Capacity 140l, admission pressure 2,5 bar, connection 1“, male thread

435.-

AG200S

Capacity 200l, admission pressure 2,5 bar, connection 1“, male thread

560.-

AG300S

Capacity 300l, admission pressure 2,5 bar, connection 1“, male thread

610.-

AG500S

Capacity 500l, admission pressure 2,5 bar, connection 1“, male thread

1,800.-

141 321

Expansion tank information ASG (exp. tank / VSG sizing) Flat plate collectors:

141 301

Up to coll. surface area

AGS

VSG

5 m2

18

6

7.5 m2

25

6

12.5 m2

33

12

15 m2

50

20

141 302

141 303

22.5 m2

80

20

30 m2

100

60

141 320

141 305

(Tab. applies for approx. 30 m Cu22 and ∆h = 5 - 15 m /pipe sizing according to SONNENKRAFT manuals.) VSG are needed especially for low system heights (<5m)

141 306 141 322

141 307

141 308

Professional equipment KP

141 603

FSP

141 601

PHMS 141 602

PMM

141 604

FPE

141 606

PRKO

141 605

TGSK

141 607

TGSKR-E 141 629

MSSK500 141 608

64

Compass with inclination angle meter

110.-

Antifreeze tester for propylene glycol

155.-

Litmus stripes for pH between 4 and 10 (for checking older systems), 100 pcs.

30.-

Test manometer for expansion tank

80.-

141 314

MAG connection, corrugated

MAGAS-1500 stainless steel pipe, uninsulated, 141 531

length 1,5m, connection 3/4“, female thread

20.-

KVAG20

Cap valve 3/4“ female, testing or emptying

35.-

KVAG25

Cap valve 1“ female, testing or emptying

45.-

140 011

140 012

Solar system intermediate tank

Filling pump with barrel, hose and pressure pump, 230 V, 50 m delivery head

800.-

VSG6

Intermediate tank 6 l, connection 3/4“ male

49.-

Test kit for solar power system maintenance

450.-

VSG12

Intermediate tank 12 l, connection 3/4“ male

65.-

Collector strap for SK500

135.-

VSG20

Intermediate tank 20 l, connection 3/4“ male

85.-

Collector strap for SKR500

80.-

VSG60

Intermediate tank 60 l, connection 3/4“ male

175.-

Installation wrench for SK500

10.-

VSG200

Intermediate tank 200 l, connection DN 40

870.-

141 315

141 316 141 317

141 318 141 319


ACCESSORIES

components Accessories TBM20

Thermostatic domestic water mixer 3/4“, incl. backflow inhibitor

65.-

TBM25

Thermostatic domestic water mixer 1“, incl. backflow inhibitor

150.-

120 013

EHP25 120 001

EHP45 120 002

EHP6

120 003

EHP9

120 004

2,5kW, 230V or 400V, 390 mm fitting length

255.-

4,5kW, 400V, 470 mm fitting length

285.-

6.0kW, 400V, 620 mm fitting length

305.-

9.0kW, 400V, 780 mm fitting length

330.-

120 014

Solar flow volume meter DMS20 130 005

DMS25

Electrical heating information

130 006

EHP25

EHP45

EHP6

EHP9

DMS20-HT 130 336

DMS25-HT

PS5000E

PS3000E

PS1500/2000E

PS800/1000E

PSC800/1000E

PSR800/1000E

PSR500E

DHW750/1000R2E

DHW300/400/ 500PR2E

DHW200PR2E

EHP

TANK

Selecting the electrical cartridge: Using a 2,5kW cartridge, approx. 100 l water can be heated in approx. 1,5 hrs from 10° up to 40°C. Observe local connection regulations. The electrical cartridges are only intended for auxiliary heating and horizontal installation (not for continuous operation).

130 337

DWV20 130 007

130 008

Stainless steel corrugated pipe, insulated

DWV32

Stainless steel corrugated pipe with 1” female/1” male thread screw connections allows solder free and flexible pipe laying into the house and accommodates heat expansion. Corrugated connector hose; 50 cm long

30.-

IWS100

Corrugated connector hose; 100 cm long

40.-

IWS300

Corrugated connector hose; 300 cm long

80.-

141 520 141 521

141 522

SSD

140 009

Silicone roof inlet up to Ø 35 mm, EPDM pipe sleeve with fastening flange on roof side

130 449

ETI22

Air vent 22 mm, weatherproof insulated

67.-

ETI28

Air vent 28 mm, weatherproof insulated

74.-

140 002 140 003

2013 prices – all prices are indicated in GBP excluding VAT

225.-

Flow volume meter for high temperatur applications, 1” female thread, 10-40 l/min (~30-120m2 coll. area), max. 185°C (long term) or 195°C (short term)

235.-

3-way motor valve 3/4” female thread

90.-

3-way motor valve 1” female thread

95.-

3-way motor operated valve 5/4”, incl. electric actuator

480.-

3-way distributor valve 3/4” incl. actuator

220.-

DWF25

3-way distributor valve 1” incl. actuator

250.-

DWF32

3-way fixed-value controller 5/4”, incl. drive and 2 m capillary tube

620.-

Sealing disc for bench screw ø12 mounting sytems on sheet metal roofing

5.-

130 088

67.-

Flow volume meter for high temperatur applications, 3/4” female thread, 2-12 l/min (~30m2 coll. area), max. 185°C (long term) or 195°C (short term)

DWF20 130 009

Air vents 140 001

185.-

Can be set between 40°C and 70°C for limiting temperature, incl. thermal actuator and capillary tube. Install according to instructions.

130 010

Air vent 18 mm, weatherproof insulated

Flow volume meter 1” female thread, 10-40 l/min (~30-120m2 coll. area), max 130°C

Three-way set-value control

25.-

ETI18

180.-

Motor valves with spring return 230V

DWV25

IWS50

Flow volume meter 3/4” female thread, 2-12 l/min (~30m2 coll. area), max. 130°C

VARIOUS SS12350-DS 182 101

65

Accessories

Electrical heating cartridges Immersion heater with 6/4“ male thread use only for secondary heating


what it does The COMPACT Power solutions from SONNENKRAFTÂŽ use the energy of the sun to generate electricity for domestic use. Solar electricity is technically named photovoltaic. Depending on local regulations, if more electricity is produced than needed, it may be sent into the grid and sold to energy suppliers.

How it works The sun hits the photovoltaic cells and generates electricity. The electricity runs through cable to an inverter that converts from DC to AC and now its ready to use.

the Improvement Economic The CoMPACT Power solutions enable the production of the total electricity demand for free. Furthermore, in some cases, surplus electricity may be sold back to the energy supplier’s grid and you earn money every day.

Environmental 90 % of the worlds electricity is produced by combustion of fossil fuels, which is considered to be the largest contributing factor to the release of greenhouse gases into the atmosphere. That is why governments in almost every country have set up aggressive goals to reduce carbon dioxide emission. Using solar energy emits zero carbon dioxide.

Independency oil and gas are scarce resources that will run out of over time. The future price is highly uncertain. During the last 10 years the oil price has increased by 300 %. Using as much solar energy as possible reduces the user's dependency on other energy sources, and so removes the worry about increasing fossil fuel prices and future scarce supply.

66


solar electricity Benefits • Produce electricity for free and earn money on surplus electricity • Appealing up-market design thanks to colour co-ordinated components • Easy to install and very low maintenance

the solution COMPACT POWER

SOLAR ELECTRICTY

The SONNENKRAFT® COMPACT Power is an easily installed photovoltaic solution consisting of solar cells on your roof and an inverter for connection to the power grid.

COMPACT Power

2013 prices – all prices are indicated in GBP excluding VAT

67


solar Electricity

COMPACT POWER PV – Photovoltaic – is the most effective way of generating electricity from the sun. A PV-solution from SONNENKRAFT® ensures a low maintenance installation and the option of rebate from your power supplier.

Functional diagram COMPACT Power e

ul

od

-m PV

DC isolator

Power Grid Inverter

68

Electrical box

Utility Co. meter

Appealing up-market module design

UNIQUE GLASS STRUCTURE

Modern and unique design which fits to every home because of colour co-ordinated high quality black solar cells and mounting systems.

The rare structured glass surface is designed for maximum efficiency. It has a higher absorbance, reduced reflection and less dust collection, giving a yearly efficiency 3% higher than standard photovoltaic glass.


Compact power solutions Number of photovoltaic modules BLACK PEARL Module area

1.96 kWp

2.94 kWp

3.92 kWp

4.9 kWp

5.88 kWp

7.84 kWp

9.8 kWp

11.76 kWp

Pcs.

8

12

16

20

24

32

40

48

m2

13.12

19.68

26.24

32.8

39.36

52.48

65.6

78.72

850221

850225

850229

850223

850227

850231

Standard sets WITH mounting system (AT, DE, DK, CH) Roof bracket parallel DBP

£ Item no.

Bench srew parallel SSP

Prices on request 850201

850205

850209

£ Item no.

850213

850217

Prices on request 850203

850207

850211

850215

850219

850245

850249

Standard sets WITH mounting system (IT) Roof bracket parallel DBP

£ Item no.

Bench srew parallel SSP

Prices on request 850233

850237

£ Item no.

850241 Prices on request

850235

850239

850243

850247

850251

Inverter*

4

4

4

4

4

4

4

4

DC-Box (pre-mounted)

4

4

4

4

4

4

4

4

AC-Box (pre-mounted)

4

4

4

4

4

4

4

4

Full engineering/designing package**

4

4

4

4

4

4

4

4

Set components

ADDITIONAL PRODUCTS - 100 m DC cable 6 mm2 (821 217) - x,xxx.-, Pair of MC4 connectors (male + female) (821 222) - x,xxx.-, Datalogger - on request *) AT, DE, DK, CH: Fronius, Danfoss or PowerOne / IT: PowerOne **) IT: incl. package ENEL/GSE Note: The table shows standard solutions. Customized solutions are also available, e.g. for flat roofs, specific mounting configurations or higher snow/wind loads. Further sets for above not mentioned markets are also available on request!

Powered by:

Long lasting warranty

The COMPACT POWER solutions are delivered with the most complete planner package. Our highly experienced engineers will take all thinkable variables of the placement of the installation into consideration, and thereby ensuring the highest possible efficiency and earnings.

The warranty on the actual products is no less than 10 years, and the warranty on the performance of the panels reaches 25 years.

SOLAR ELECTRICTY

Professional planning

100%

included: • System report • Installation plan • Mounting manual • Electrical schemes • CE certificates all on paper and CD

90%

80%

SONNENKRAFT performance guarantee 0%

2013 prices – all prices are indicated in GBP excluding VAT

0 1

5

10

15

20

25

69


PV-module

Black pearl 245 wp The BLACK PEARL 245 WP is SONNENKRAFTs brand new photovoltaic module. Its features are the modern and unique design that fits every home and its outstanding efficiency. High quality

HIGH EFFICIENCY

Tight sealing

The PV-module is made of the highest quality industrial components and this ensure life-long durability.

The optimised surface pattern of the glass ensures an increased yield of 3% per year.

Special developed film ensures optimum protection against moisture penetration.

POWER SPECIFICATIONS

PERFORMANCE

Rated power at STC1

245 Wp

60 polycrystalline cells

156 mm x 156 mm

Type

Black Pearl 245 WP

Pmpp[Wp]

245 Wp 26.47 V

Connection system

MC4/LC4

Umpp[wP]

Max. system voltage

1000 V DC

Impp[A]

6.77 A

Pmpp = -0.47 %/K Uoc = -0.36 %/K Isc = 0.02%/K

Uoc[V]

33.48 V

Temperature coefficient

Isc[A]

7.13 A

Standard test conditions

AM 1,5 / 1000 W per m2 / 25° C

Efficiency

14.9 %

Space per kWp

6.7 m2

Ambient temperature

-40°C to + 85°C

Cable length

1000 mm

Bypass diodes Performance guarantee

3 pcs. 90 % up to 10 years and 80 % up to 25 years

Product warranty

10 years

The measurement tolerance of the rated power is ± 3 %. The modules delivered are sorted in a range of ± 2.5 Wp. 1)

8 vent holes ø 4 mm

name plate

PRODUCT SPECIFICATIONS Dimensions with aluminum frame Cell manufacturer Weight Glass specifications Encapsulation material

Bosch, Germany 21 kg

cable length 1000 mm

EVA (Solutia Solar) composite film, black (Krempel/Isovolta)

Test certificate

IEC 61215 Ed. 2 & IEC 61730; ISO 9001 & ISO 14001; MCS and CEC accredited

Ammonia resistance

6 mounting holes 8 x 16 mm

4 mm Albarino P (Saint-Gobain Solar)

Back material

Enhanced hail test

70

1660 mm x 990 mm x 50 mm (+/-2 mm)

Hailstone size 24 mm, maximum speed o ​ f 83km/h 1500 h - 70°C, 70 % relative humidity and 750 ppm of ammonia concentration

6 grounding holes ø 4 mm

4 drain holes ø 5 mm

distance of mounting holes


COMPARISON OF MODULE CAPACITIES

Fits with following System solutions

COMPACT E

(Source: Evaluation of yield of patterned front glass, ISFH report Mak230209-2, July 2009)

SOL+

Two thirds of a household's energy demand is typically for hot water and heating, for which our solar thermal solutions are optimal. The remaining one third is for electricity, which is why a solar thermal solution may very well be combined with a photovoltaic solution. The COMPACT POWER is combineable with any of SONNENKRAFT's solutions for hot water and heating.

SOLAR ELECTRICTY

The chart illustrates the relationship between capacity increase and installation angle of a module. It is clearly evident that the Black Pearl module produces at an installation angle of 10° the same output as a reference module at an angle of 30°. At an installation angle of 30°, the capacity of the Black Pearl module is considerably higher than 100 % of the reference output.

COMFORT E Plus

COMFORT E

2013 prices – all prices are indicated in GBP excluding VAT

71


Notes

72


TERMS & CONDITIONS 2013 prices – all prices are indicated in GBP excluding VAT

73


terms and conditions of sale 1. Interpretation (I) “Company” means Sonnenkraft Solar Systems Limited. (II) “Buyer” means the person or firm who purchases the Goods from the Company. (III) “Contract” means the contract between the Company and the Buyer for the sale and purchase of the Goods. (IV) “Goods” means the goods or any part of them agreed to be supplied on the face of the quotation or order acknowledgement. (V) “Intellectual Property Rights” means all vested, contingent and future intellectual property rights including but not limited to copyright, trade marks, service marks, design rights (whether registered or unregistered), patents, know-how, trade secrets, inventions, get-up, database rights and any applications or registrations for the protection of these rights and all renewals and extensions thereof existing in any part of the world whether now known or in the future. 2. Contract (I) All quotations given and all Contracts made by the Company are subject to the terms and conditions contained herein and all terms and conditions referred to by the Buyer or contained in any order, acceptance of quotation or otherwise brought to the notice of the Company are hereby excluded. These terms and conditions may be varied only by agreement in writing between the parties. Accordingly these terms and conditions constitute (together with the contractual documents to which they are attached or relate) the whole agreement between the parties and supersede any prior promises, representations, undertakings or implications. (II) No servant or agent of the Company has any authority to make any representation or give any warranty in relation to the Goods or the materials to be used in the manufacture of the Goods, or to agree to any variation or addition to these terms and conditions, unless such representation, warranty, variation or addition is expressed in writing and signed on behalf of the Company by an authorised representative of the Company. (III) All orders placed with the Company require written acceptance before any Contract arises. 3. Validity Unless previously withdrawn a quotation is valid only for the period stated, or when no period is stated, for a period of 20 days only after the date of the quotation. 4. Price (I) The price of the Goods shall be the price set out in the order acknowledgement, or if no price is quoted, the price set out in the Company’s published price list in force as at the date of delivery. (II) The price of the Goods is exclusive of Value Added Tax which is payable by the Buyer. (III) Unless otherwise stated in the quotation or order acknowledgement, the price of the Goods is exclusive of the costs and charges of packaging, insurance and transport of the Goods, which shall be invoiced to the Buyer. 5. Payment (I) The Company may invoice the Buyer for the Goods on or at any time after the completion of delivery. (II) Unless otherwise stated in the quotation or order acknowledgement, the Buyer shall pay the invoice in full and in cleared funds within 30 days running from the end of the month the invoice was dated. Payment shall be made to the bank account nominated in writing by the Company. Time for payment of the price shall be of the essence of the Contract. (III) Where payment is delayed beyond the date specified for payment in sub-clause (II) of this clause, the Buyer shall pay compound interest on any sums remaining unpaid at the rate of 4% above base rate of HSBC Bank Plc for the time being from the date so specified for payment until the date of actual payment. The Buyer shall pay the interest together with the overdue amount. 6. Delivery (I) The Company shall deliver the Goods to the location set out in the order acknowledgement or such other location as the parties may agree at any time after the Company notifies that the Goods are ready. Delivery shall be completed on the Goods’ arrival at the relevant location. The Buyer shall make all necessary arrangements to take delivery of the Goods whenever they are tendered for delivery, including arrangements for unloading the Goods from the delivery vehicle. (II) The Company may deliver the Goods ordered by instalments, which may be invoiced and paid for separately. Each instalment shall be a separate contract and no cancellation or termination by either party of any one Contract relating to an instalment shall entitle the Buyer to cancel or repudiate any other Contract or instalment. (III) Whilst every effort is made to ensure that the Goods are delivered on the due date, the Company shall not be liable for any delays in delivery which may occur. The Company may at any time give notice of revised delivery dates. (IV) If the Company is unable by reason of the Buyer’s instructions or lack of instructions to effect delivery of the Goods within 14 days of notification by

74

the Company that the Goods are ready, the Buyer shall pay to the Company such sums of money as may be due under the terms of the Contract upon presentation of invoices. (V) The Company shall be responsible for any damage, shortage or loss in transit, provided that the Buyer notifies it to the Company (or its carrier, if applicable) within 3 days of delivery or the proposed delivery date of the Goods and that the Goods had been handled in accordance with the Company‘s stipulations. Any remedy under this sub-clause shall be limited, at the option of the Company, to the replacement or repair of any Goods which is proven to the Company‘s satisfaction to have been lost or damaged in transit. (VI) No contract between the Company and the Buyer shall be a sale by sample. 7. Storage The Company shall be entitled to store any or all of the Goods at its own premises or elsewhere if the Buyer fails to take delivery: (a) at the time specified therefor; or (b) at the time when delivery shall be deemed to have been made; and the Company shall also be entitled to charge the Buyer for all related costs and expenses (including insurance). 8. Defects (I) For products which bear the Sonnenkraft trade mark, the Company grants the following warranty: the Company will make good by repair or, at its own discretion, by the supply of a replacement, defects which under proper use appear within 5 years from the date of delivery in the case of Goods consisting of solar collectors and tanks (with the exception of collector accessories) and 2 years from the date of delivery in the case of all other Goods. Defective Goods shall be promptly returned to the Company’s works at the Buyer’s expense unless otherwise agreed. The repaired or replacement Goods will be delivered by the Company free of charge and the said Goods will have the benefit of the unexpired portion of the warranty period aforementioned. (II) The Company’s obligations and liability for defective Goods under sub-clause (I) of this clause are subject to: (a) the Buyer showing to the Company’s reasonable satisfaction that the defect is solely attributable to faulty design, materials and/or workmanship; (b) following delivery, the Goods not having been misused or subjected to neglect, improper or inadequate care, carelessness or abnormal usage conditions or involved in any accident, repair, replacement, servicing or modifications contrary to the instructions of the Company; (c) following delivery, in the case of Goods consisting of solar collectors, the defect not being the result of mechanical stress and/or alterations due to weather conditions or minor colour deviations and/or surface impairments which have no economically relevant influence on the solar collector’s functions; (d) following delivery, in the case of Goods consisting of tanks, the defect not being the result of lime deposits, corrosion caused by creepage current or oxygen diffusion; and (e) the Buyer allowing the Company the opportunity to examine the Goods. (III) Alternatively to sub-clause (I) of this clause, the Company shall be entitled at its absolute discretion to refund the price of the defective Goods in the event that such price shall have already been paid by the Buyer to the Company, or, if such price has not been so paid, to relieve the Buyer of all obligation to pay the same by the issue of a credit note in favour of the Buyer in the amount of such price. (IV) The foregoing is the full extent of the Company’s liability hereunder and otherwise (including but not limited to negligence) in connection with or arising from defects in the Goods. (V) Any replacement of Goods due to them being defective shall not constitute late delivery. 9. Intellectual Property The Company’s Intellectual Property Rights in and relating to the Goods shall remain the exclusive property of the Company, and the Buyer shall not at any time make any unauthorised use of such Intellectual Property Rights, nor authorise or permit any of its agents or contractors or any other person to do so. 10. Cancellation The Buyer shall not be entitled to cancel the Contract without the prior written consent of the Company and then only upon such terms as the Company may require by way of indemnity or compensation for any loss (including loss of profit), damage, cost or expense which the Company may have suffered by reason of such cancellation. Without prejudice to the foregoing, in the event of cancellation by the Buyer of any Contract for Goods specifically manufactured by the Company to individual specifications and not marketed by the Company as standard lines, the Company shall be entitled to charge for all expenses incurred in preparation for the manufacture of such Goods. 11. Specifications (I) All information including that relating to performance facts, drawings, dimensions, photographs and the like is to be regarded as a general guide only


and constitutes no guarantee of accuracy from the Company, unless specifically confirmed in writing by the Company at the time of placing the order. (II) Suggestions, recommendations, drawings, specifications and documents supplied in connection with quotations or Contracts and all rights in relation thereto are the property of the Company and are returnable forthwith on demand at the Buyer’s expense and may not be disclosed to a third party without the prior written authority of the Company. (III) The Buyer assumes responsibility for the capacity and performance of the Goods being sufficient and suitable for his purpose. Furthermore, all recommendations and advice given by or on behalf of the Company as to the quality and/or suitability for any particular purpose are given without any liability whatsoever on the part of the Company, its servants or agents. 12. Passing of risk Risk shall pass to the Buyer upon delivery or deemed delivery of the Goods at the Company’s premises or such other place of delivery as may be agreed notwithstanding that the property in the Goods may not have passed to the Buyer. 13. Title Until the Company has received payment in full of all sums owing or due to the Company in respect of the Goods, the Buyer holds the Goods in a fiduciary capacity as bailee for the Company and: (a) legal and beneficial title in the Goods shall remain with the Company and the Company may require the Buyer to store the Goods in such a way that they are clearly marked as the property of the Company and to maintain full insurance cover against loss or damage in respect thereof; (b) the Company reserves the right of disposal of each item of the Goods and may retake possession thereof at any time and for that purpose its servants or agents may enter upon any land or premises occupied by the Buyer; (c) the Buyer undertakes in relation to the Goods not to remove parts, add to, modify or otherwise do any work on such Goods without the prior written permission of the Company; (d) notify the Company immediately if it becomes subject to the event specified in clause 16(a) or (b); and (e) give the Company such information relating to the Goods as the Company may require from time to time. 14. Liability (I) Nothing in these terms and conditions shall limit or exclude the Company‘s liability for: (a) death or personal injury caused by its negligence, or the negligence of its employees, agents or subcontractors (as applicable); (b) fraud or fraudulent misrepresentation; (c) breach of the terms implied by section 12 of the Sale of Goods Act 1979; (d) defective products under the Consumer Protection Act 1987. (II) Subject to sub-clause (I) of this clause, the Company hereby excludes liability for all or any representations, terms, conditions or warranties, whether express or implied, relating to the Goods and without prejudice to the foregoing, limits the extent of any liability which it may be under to repaying the invoice price received for the Goods that are the subject of the Contract. In no event shall the Company be liable whether in contract, tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any indirect, special or consequential loss arising under or in connection with the Contract. 15. Force Majeure (I) The Company shall not be liable for any loss or damage whatsoever caused by delay in the performance or the non performance of any of its obligations under this Contract where the delay is due to any cause beyond the Company’s control. In such event the Company may terminate or suspend this Contract with no liability for loss or damage thereby occasioned. (II) The following shall, without prejudice to the generality of the above, be considered causes beyond the Company’s control: Act of God; war or threat of war; sabotage; insurrection; civil disturbance; requisition; governmental or Parliamentary restriction; prohibitions or enactments of any kind; import or export regulations; strikes; lock-outs; trade disputes (whether involving employees of the Company or another); difficulties in obtaining labour, fuel, materials, machinery, information, data or know-how; breakdown in machinery; fire or accident; inadequate or defective instruction from the Buyer; defaults of the Buyer or any third party.

(c) the Buyer commits any material breach of its obligations hereunder. 17. Statutory Rights If the Buyer is deemed by law to be dealing as a consumer, his statutory rights are in no way to be adversely affected by these terms and conditions. 18. Severance (I) If any court or competent authority finds that any provision of the Contract (or part of any provision) is invalid, illegal or unenforceable, that provision or part-provision shall, to the extent required, be deemed to be deleted, and the validity and enforceability of the other provisions of the Contract shall not be affected. (II) If any invalid, unenforceable or illegal provision of the Contract would be valid, enforceable and legal if some part of it were deleted, the provision shall apply with the minimum modification necessary to make it legal, valid and enforceable. 19. Assignment and Sub-contracting (I) The Company may at any time assign, transfer, charge, subcontract or deal in any other manner with all or any of its rights or obligations under the Contract. (II) The Buyer may not assign, transfer, charge, subcontract or deal in any other manner with all or any of its rights or obligations under the Contract without the prior written consent of the Company. 20. Third Parties A person who is not a party to the Contract shall not have any rights under or in connection with it. 21. Waiver Failure by the Company to insist upon strict performance of the terms and conditions of this Contract shall not be deemed a waiver of any subsequent default hereof. 22. Law and Jurisdiction The Contract shall be governed by and construed in accordance with English law and the parties irrevocably agree that the English Courts are to have jurisdiction to settle any dispute arising out of or in connection with this Contract, save that the Company shall be entitled at its sole discretion to refer such disputes to the Court of any jurisdiction in which the Buyer carries or has carried on business. 23. Notice (I) Any notice given to a party under this Contract shall be in writing, addressed to that party at its registered or principal office, and shall be delivered personally, sent by pre-paid first class post, recorded delivery, commercial courier, fax or e-mail. (II) A notice shall be deemed to have been received: if delivered personally, when left at the address referred to above; if sent by pre-paid first class post or recorded delivery, at 9.00 am on the fifth day after posting; if delivered by commercial courier, on the date and at the time that the courier‘s delivery receipt is signed; or, if sent by fax or e-mail, one day after transmission. Prices valid from January 1, 2013, all other pricelists lose validity from that date. Price in £ excluding VAT. Prices subject to change (prices without indication of quantity are prices per piece). Subject to technical changes! Figures and illustrations used as examples. Formatting and printing errors might occur. Range of products is not binding.

2013 prices – all prices are indicated in GBP excluding VAT

TERMS & CONDITIONS

16. Termination Without prejudice to any other rights which the Company may have, the Company shall be entitled on giving written notice to the Buyer to determine this Contract summarily, demand immediate payment of any amount due or accruing to the Company thereunder and to retain any deposits, if any of the following circumstances occur: (a) the Buyer, not being a body corporate, becomes bankrupt or compounds or makes any arrangement with his creditors or commits any act of bankruptcy; (b) the Buyer, being a body corporate, goes into liquidation whether compulsory or voluntary (save for the purpose of amalgamation or reconstruction) or has a receiver appointed of its undertaking or assets or any part thereof; or

75


Residential

Commercial

Industrial

We have the widest assortment of solutions for your house or swimming pool

We have extensive experience in developing individual solutions for hotels, schools, apartment buildings, hospitals, etc.

We have provided more than 50 % of all solar heating installations over 1000 m2 in Europe.

Now you are enlightened, It’s time to be smart Get information At SONNENKRAFT we offer a wide range of publications to keep you well informed about our products and the development within the solar energy area. Please browse through the different brochures to find out which one suits your need best. Service & Support SONNENKRAFT offers service and support all over Europe. To find your local SONNENKRAFT partner please go to www.sonnenkraft.com and select your country or region.

Prices subject to change (prices without indication of quantity are prices per piece). Subject to technical changes! Figures and illustrations used as examples. Formatting and printing errors might occur. Range of products is not binding.

SOLAR ENERGY MADE BRIGHTER

SONNENKRAFT Solar Systems Ltd • Shakespeare House • 42 Newmarket Road, CAMBRIDGE • CB5 8EP Phone: +44 (0) 1778 440 148 • Email: uk@sonnenkraft.com

UK-SK-0327-1211-IN © 2013 SONNENKRAFT Solar Systems Limited • SONNENKRAFT and the SONNENKRAFT logo are trademarks owned by VKR Holding A/S

SONNENKRAFT® is one of the leading solar energy experts in Europe. We offer solutions that can provide hot water, room heating and electricity for any need, from individual homes to large solar parks.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.