GENERALSCAN GS-M100BT BLUETOOTH 1 D LASER BAR CODE SCANNE R
PRODUCT INTRODUCTION
Generalscan GS-M100BT Bluetooth 1D Laser Barcode Scanner for iOS and Android Smart Mobile POS offer the GS-M100BT Laser 1D read head scanner which is developed by Generalscan and is small in size but has a high performance, functioning as a 1D Bluetooth laser barcode scanner. It can be installed on the back of mobile phone case attaching the sled using 3M adhesive tape and then converts the mobile phone into a professional barcode terminal. The GS-M100BT can easily connect with both Bluetooth modes. You can connect with iOS devices like iPhone, Ipad which also converts the scanner into external Bluetooth keyboard device. With SPP mode ,you can connect with all Android platform. User only need simple install Generalscan Bluetooth IME input driver,then your application can get barcode scanner data from Generalscan Bluetooth IME input.You do not need care about complex Bluetooth programming technique any more.
TECHNICAL SPECIFICATIONS Sr. No.
Particular
Detail
1
Measurement (L*W*H)
52.92mm * 37.48mm * 14.0 mm
2
Electrical
DC 5V Typical : 85 ma DC5V
3
Battery Power
500 mAh Li-ion , 15 Days Standby , Work with good decode 8 hours at 10s trigger interval, changeable Li-ion battery .
4
Communication
Class 2.0 Bluetooth HID,SPP with 50 M Dis.
5
Barcode Type
UPC-A, UPC-E, EAN-8, ISBN/ISSn, Code 39, Code 39 full ASCII, Code 32 etc.
6
Sensor Type
Laser Diod 650nm
7
Scan Rate
100 times
8
Scan Angle
Skew, Pitch and roll
9
Decode Speed
100 times per second
10
Contrast
>20%