English by snapblock

190 Projects Manual

Snap Block Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Project List

Before start please read the instruction & caution on page 8 to 9 carefully, and keep the suggested method during playing. 프로젝트 시작전 사용자 메뉴얼 8-9페이지의 사용시 주의사항을 읽고, 반드시 제시된방법에 의해서만 프로젝트를 진행해 주세요.

# Project Name

1. Lamp 2. LED 3. Magnet-controlled lamp 4. Magnet-controlled LED 5. Button switch-controlled lamp 6. Electric fan 7. magnet-controlled fan 8. Button switch-controlled fan 9. Parallel connection of lamp and motor 10. Series connection the LED and light 11. Reed switch-controlled series connection of LED and light 12. Button switch-controlled series connection of LED and light 13. Series connection of electric motor and LED 14. Parallel connection of LED and light 15. Parallel connection of LED and electric motor 16. Unidirectional conductivity of LED 17. Series connection of lamp, LED and motor 18. Parallel connection of lamp, LED and motor 19. Parallel series of lamp, LED and motor (1) 20. Parallel series of lamp, LED and motor (2) 21. Parallel series of lamp, LED and motor (3) 22. Parallel series of lamp, LED and motor (4) 23. Alternative lighting up of lamp and LED 24. Electric motor and LED take turns conduction 25. Alternating light 26. Magnet-controlled alternating light 27. Variable speed electric fan 28. Button switch-controlled variable speed electric fan 29. Conductor tester

# Project Name

30. Simple telegraph exerciser 31. Positive and negative rotary of motor 32. Two series-connected switches control one lamp 33. Two switches in parallel control one lamp 34. Three series-connected switches control one lamp 35. Three parallel-connected switches control one lamp 36. Three parallel-series switches control one lamp (1) 37. Three parallel-series switches control one lamp (2) 38. Two switches control two electrical appliances separately 39. Two switches in parallel series control two electrical appliances 40. Two switches in parallel control two parallel-connected electrical appliances 41. Two series-connected switches control two parallel-connected electrical appliances 42. Three series-connected switches control two parallel-connected electrical appliances 43. Two series-connected switches control three parallel-connected electrical appliances 44. Two switches in parallel control three parallel-connected electrical appliances 45. Three series-connected switches control three parallel-connected electrical loads 46. Two series-connected switches control two series-connected electrical appliances 47. Two switches in parallel control two parallel-connected electrical appliances 48. Three switches in series control three series-connected electrical appliances 49. Two switches in series control three series-connected electrical

Snap Block

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Project List

# Project Name

appliances 50. Two switches in parallel control three series-connected electrical appliances 51. Three switches in series control three series-connected electrical loads 52. Sound of patrol wagon 53. Sound of machine gun 54. Sound of fire engine 55. Sound of fire engine 56. Sound of ambulance 57. Sound of Monster laugh 58. Button switch-controlled sound of patrol wagon 59. Button switch-controlled sound of machine gun 60. Button switch-controlled sound of fire engine 61. Button switch-controlled sound of ambulance 62. Button switch-controlled sound of game machine 63. Button switch-controlled sound of Monster laugh 64. Magnet-controlled sound of patrol wagon 65 .Magnet-controlled sound of machine gun 66. Magnet-controlled sound of fire engine 67. Magnet-controlled sound of ambulance 68. Magnet-controlled sound of Monster laugh 69. Red light warning sound of patrol wagon 70. Red light warning sound of machine gun 71. Red light warning sound of fire engine 72. Red light warning sound of ambulance 73. Flashing red light sound of Monster laugh 74. Magnet-controlled red light warning sound of fire engine 75. Magnet-controlled glow warning sound of patrol wagon

# Project Name

76. Magnet-controlled red light warning sound of machine gun 77. Magnet-controlled red light warning sound of ambulance 78. Magnet-controlled sound of Monster laugh with flashing red light 79. Button switch-controlled red light warning sound of fire engine 80. Button switch-controlled glow warning sound of patrol wagon 81. Button switch-controlled red light warning sound of machine gun 82. Button switch-controlled red light warning sound of ambulance 83. Button switch-controlled the sound of Monster laugh with flashing red light 84. Acousto-optic low sound of police wagon 85. Acousto-optic low pitch sound of machine gun 86. Acousto-optic low pitch sound of fire engine 87. Acousto-optic low pitch sound of ambulance 88. Acousto-optic low pitch sound of Monster laugh 89. Magnet-controlled acousto-optic low pitch sound of patrol wagon 90. Magnet-controlled acousto-optic low pitch sound of machine gun 91. Magnet-controlled acousto-optic low pitch sound of fire engine gives out a low pitch sound of fire engine. 92. Magnet-controlled acousto-optic low pitch sound of ambulance 93. Magnet-controlled acousto-optic low pitch sound of Monster laugh 94. Button switch-controlled acousto-optic low pitch sound of patrol wagon 95. Button switch-controlled acousto-optic low pitch sound of machine gun 96. Button switch-controlled acousto-optic low pitch sound of fire en gine 97. Button switch-controlled acousto-optic low pitch sound of ambu lance 98. Button switch-controlled acousto-optic low pitch sound of Monster

Snap Block

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Project List #

Project Name

laugh 99. Acousto-optic medium pitch sound of police wagon 100. Acousto-optic medium pitch sound of machine gun 101. Acousto-optic medium pitch sound of fire engine 102. Acousto-optic medium pitch sound of ambulance 103. Acousto-optic medium pitch sound of Monster laugh. 104. Magnet-controlled acousto-optic medium pitch sound of patrol wagon 105. Magnet-controlled acousto-optic medium pitch sound of machine gun 106. Magnet-controlled acousto-optic medium pitch sound of fire en gine 107. Magnet-controlled acousto-optic medium pitch sound of ambu lance 108. Magnet-controlled acousto-optic medium pitch sound of Monster laugh 109. Button switch-controlled acousto-optic medium pitch sound of patrol wagon 110. Button switch-controlled acousto-optic medium pitch sound of machine gun 111. Button switch-controlled acousto-optic medium pitch sound of fire engine 112. Button switch -controlled acousto-optic medium pitch sound of ambulance 113. Button switch-controlled acousto-optic medium pitch sound of Monster laugh 114. Quick flashing lamp 115. Magnet-controlled quick flashing light 116. Button switch-controlled quick flashing light

Project Name

117. Flashing LED 118. Magnet-controlled flashing LED 119. Button switch-controlled flashing LED 120. Slow flash lamp 121. Slow flash LED 122. Magnet-controlled slow flash 123. Magnet-controlled slow flash LED 124. Button switch-controlled slow flash lamp 125. Button switch-controlled slow flash LED 126. Motor-controlled sound of patrol wagon 127. Motor-controlled sound of machine gun 128. Motor-controlled sound of fire engine 129. Motor-controlled sound of ambulance 130. Motor-controlled sound of Monster laugh 131. Button switch-controlled motor sound of patrol wagon 132. Button switch-controlled motor sound of machine gun 133. Button switch-controlled motor sound of fire engine 134. Button switch-controlled motor sound of ambulance 135. Button switch-controlled motor sound of Monster laugh 136. Magnet-controlled motor sound of patrol wagon 137. Magnet-controlled motor sound of machine gun 138. Magnet-controlled motor sound of fire engine 139. Magnet-controlled motor sound of ambulance 140. Magnet -controlled motor sound of Monster laugh 141. Red light motor-controlled sound of patrol wagon 142. Red motor-controlled sound of machine gun 143. Motor-controlled sound of fire engine 144. Red light motor-controlled sound of ambulance 145. Red light motor-controlled sound of Monster laugh

Snap Block

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Project List

# Project Name

146. Button-controlled red light motor sound of patrol wagon 147. Button-controlled red light motor controlled sound of machine gun 148. Button-controlled red light motor sound of fire engine 149. Button-controlled red light motor sound of ambulance 150. Button-controlled red light motor sound of Monster laugh 151. Magnet-controlled red light motor sound of patrol wagon 152. Magnet-controlled red light motor controlled sound of machine gun 153. Magnet-controlled red light motor sound of fire engine 154. Magnet-controlled red light motor sound of ambulance 155. Magnet-controlled red light motor sound of Monster laugh 156. Sound of patrol wagon with light 157. Sound of machine gun with flashing light 158. Sound of fire engine with flashing light 159. Sound of fire ambulance with flashing light 160. Sound of fire Monster laugh with flashing light 161. Button switch-controlled sound of patrol wagon with light 162. Button switch-controlled sound of machine gun with flashing light 163. Button switch-controlled sound of fire engine with light 164. Button switch-controlled sound of fire ambulance with light 165. Button switch-controlled sound of fire Monster laugh with light 166. Magnet switch -controlled sound of patrol wagon with light 167. Magnet switch -controlled sound of machine gun with flashing light 168. Magnet switch -controlled sound of fire engine with light 169. Magnet switch -controlled sound of fire ambulance with light 170. Magnet switch -controlled sound of fire Monster laugh with light 171. Whistling atmospherics

# Project Name

172. Button switch-controlled whistling atmospherics 173. Magnet switch-controlled whistling atmospherics 174. Adjustable radio 175. Low volume FM radio 176. Electrical level indication FM radio 177. Power indicator FM radio 178. Touch radio 179. AND gate 180. OR gate 181. NOT gate 182. Light AND gate 183. Light OR gate 184. Motor AND gate 185. Motor OR gate 186. Alarm AND gate 187. Alarm OR gate 188. Alarm NOT gate 189. Radio AND gate 190. Radio NOT gate

Snap Block

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

1. Lamp

2. LED Replace the bulb with a LED, positive pole towards the right, when the switch is on, the LED lights, when the switch is off, LED goes out.

Snap Block

스냅 블럭

When the switch is on, the lamp lights. When the switch is turned off, the lamp goes out.

Setting a standard of educational electronic block (Ver.01)

3. Magnet-controlled lamp Place the magnet close to the reed switch, the lamp lights, take the magnet away from the reed switch, the lamp goes out.

Snap Block

스냅 블럭

Snap Block

4. Magnet-controlled LED Replace the bulb with a LED, positive pole towards the right. Place the magnet close to the reed switch, the LED lights, take the magnet away from the reed switch, the LED goes out.

www.Snap Block.co.kr

Snap Block

스냅 블럭

5. Button switch-controlled lamp Press the button switch, the lamp lights; release the button switch, the lamp goes out at once.

Snap Block Snap Block

스냅 블럭

6. Electric fan First, install the fan blade, then turn on the switch, the fan start rotating.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 8. Button switch-controlled fan First, install the fan blade, then press the button switch, the fan will start spin, release the button switch, the fan stop spinning.

Snap Block

스냅 블럭

보안경

7. magnet-controlled fan First, install the fan blade, place the magnet close to the reed switch, the fan will start spin; take away the magnet from the reed switch, the fan stop spinning.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

10. Series connection the LED and light Turn on the switch, the red LED will light but not the lamp, this is because LED needs only small current for itself to light up and the lamp needs higher current to light up but now there is only small current in this series-connection circuit.

Setting a standard of educational electronic block (Ver.01)

Snap Block

Snap Block 스냅 블럭

보안경

9. Parallel connection of lamp and motor First, install the fan blade, turn on the switch, the fan rotates and the lamp lights. Turn off the switch, the fan stop and the lamp goes out simultaneously.

11. Reed switch-controlled series connection of LED and light Replace the switch with a reed switch, place the magnet close to the reed switch, the red LED will light but not the lamp, this is because LED needs only small current for itself to light up and the lamp needs higher current to light up but now there is only small current in this series-connection circuit. 12. Button switch-controlled series connection of LED and light Replace the switch with a button switch, press the button switch, the red LED will light but not the lamp, this is because LED needs only small current for itself to light up and the lamp needs higher current to light up but now there is only small current in this series-connection circuit.

www.Snap Block.co.kr

Snap Block

스냅 블럭 보안경

13. Series connection of electric motor and LED Turn on the switch, the LED will light but not motor, this is because LED needs only small current for itself to light up and the electric motor needs higher current to rotates but now there is only small current in this series-connection circuit.

Snap Block

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

14. Parallel connection of LED and light Turn on the switch, the LED and lamp will light up simultaneously.

www.Snap Block.co.kr

Snap Block

Setting a standard of educational electronic block (Ver.01)

16. Unidirectional conductivity of LED Turn on the switch, both the LED and the lamp do not light, because LED is unidirectional in conductivity, i.e. it only allows current to flow from positive pole to negative pole but not reversely.

Snap Block

스냅 블럭

보안경

Snap Block

스냅 블럭

15. Parallel connection of LED and electric motor Turn on the switch, the LED lights and the motor rotates.

www.Snap Block.co.kr

Snap Block

18. Parallel connection of lamp, LED and motor Turn on the switch, the LED and lamp lights, motor rotates simultaneously, so the three work at the same time.

Snap Block

스냅 블럭

보안경

Snap Block

스냅 블럭

17. Series connection of lamp, LED and motor After building the circuit, only the LED lights, the lamp and motor fail to work due to small current.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

19. Parallel series of lamp, LED and motor (1) After building the circuit, motor rotates and LED lights, but the lamp does not light, this because the lamp and LED are in series, and the current passing the bulb is small. In this circuit, the lamp and LED is connected in series and then parallel connection with the motor, in this way the circuit involved both series and parallel connection, so it is calLED as parallel series.

Snap Block

스냅 블럭

Snap Block 20. Parallel series of lamp, LED and motor (2) After build the circuit, lamp and LED lights, but the motor does not rotate. The principle is same as previous one.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

22. Parallel series of lamp, LED and motor (4) After building the circuit and pressing the button switch, LED and lamp light up, and the motor rotates simultaneously.

Snap Block

스냅 블럭

보안경

21. Parallel series of lamp, LED and motor (3) After build the circuit, only LED lights, and the motor and the lamp do not work.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

23. Alternative lighting up of lamp and LED Turn on the switch, only the LED lights, when place a magnet close to the reed switch, LED goes out and the lamp lights up. 24. Electric motor and LED take turns conduction Replace the bulb with a motor, turn on the switch, only LED lights, when place a magnet close to the reed switch, the LED goes out and the motor works simultaneously.

Snap Block

스냅 블럭

Snap Block

25. Alternating light Turn on the switch, the bulb lights and the fan rotates. Press the button switch, the fan stops and the lamp will be more brighter. 26. Magnet-controlled alternating light Replace the button switch with a reed switch, and the alternating light can be controlled by the magnet.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

28. Button switch-controlled variable speed electric fan Replace the reed switch with a button switch, press the button switch and the speed of the fan will be changed.

Setting a standard of educational electronic block (Ver.01)

Snap Block

Snap Block 스냅 블럭

보안경

27. Variable speed electric fan Turn on the switch, the lamp lights and the fan rotates, use magnet control the reed switch, the speed of fan will be changed.

29. Conductor tester With this conductor tester you may identify which daily living articles are conductors and which are not. To do this, you need only to bridge the article to be tested between terminals A and B. If the LED light, the article is a conductor, if the LED does not light, the article is non-conductor.

www.Snap Block.co.kr

Snap Block

스냅 블럭

30. Simple telegraph exerciser Press the button switch according to certain rhythm, the LED will flash. It can be used for simple telegraph exercise.

Snap Block

스냅 블럭

Snap Block 31. Positive and negative rotary of motor Build the circuit, turn on the switch, the fan starts rotating clockwise. Thrn off the switch, and fan stops. Build the circuit the motor reversly with its polarity, turn on the switch, the fan rotating cownterclockwise.

보안경

Setting a standard of educational electronic block (Ver.01)

www.Snap Block.co.kr

Snap Block

스냅 블럭

32. Two series-connected switches control one lamp After build the circuit, the bulb can be lighted only when press the button switch and turn on the switch at the same time.

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block 97

33. Two switches in parallel control one lamp Pressing the button switch or turning on the switch are can light up the bulb; if need the bulb go out, both switches must be turn off simultaneously.

www.Snap Block.co.kr

Snap Block

스냅 블럭

34. Three series-connected switches control one lamp After build the circuit, the bulb can be lighted only when the switch is turn on, press the button switch and place the magnet close to the reed switch simultaneously.

Setting a standard of educational electronic block (Ver.01)

35. Three parallel-connected switches control one lamp After build the circuit, turn on any of the three switches can light the bulb; and if need the bulb go out only need turn off all three switches.

Snap Block

스냅 블럭

Snap Block 98

www.Snap Block.co.kr

Snap Block

스냅 블럭

36. Three parallel-series switches control one lamp (1) Turn on the switch and the bulb does not light; press the button switch or place magnet close to the reed switch, the bulb lights; if need the bulb go out, only need turn off both button switch and reed switch or turn off the master switch.

Setting a standard of educational electronic block (Ver.01)

37. Three parallel-series switches control one lamp (2) If need bulb light only, just turn on the switch or turn on the reed switch by magnet and press the button switch at the same time.

Snap Block

스냅 블럭

Snap Block 99

www.Snap Block.co.kr

Snap Block

38. Two switches control two electrical appliances separately Turn on the switch, motor rotates, turn off the switch, motor stops. Press the button switch, the bulb lights, release the button switch, the bulb goes out.

스냅 블럭 보안경

Snap Block Snap Block

39. Two switches in parallel series control two electrical appliances Turn on the switch, the bulb lights; press the button switch, motor rotates; turn off the switch, the bulb goes out and motor stop rotating.

스냅 블럭 보안경

Setting a standard of educational electronic block (Ver.01)

100

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

41. Two series-connected switches control two parallel-connected electrical appliances Motor can be rotated and bulb can be lighted only when pressing the button switch as well as turning on the switch.

Snap Block

스냅 블럭

보안경

40. Two switches in parallel control two parallel-connected electrical appliances Press the button switch or turn on the switch, both can make the motor rotate and the bulb light at the same time, if need the bulb goes out or motor stops, must turn off both switches.

보안경

Setting a standard of educational electronic block (Ver.01)

101

www.Snap Block.co.kr

Snap Block

스냅 블럭

42. Three series-connected switches control two parallel-connected electrical appliances The bulb and the LED can be lighted at the same time only when all three switches are turned on, if one of them damaged, the other one can still light.

43. Two series-connected switches control three parallel-connected electrical appliances Electrical load work only when both the switch and button switch are turned on.

Snap Block

스냅 블럭

Snap Block 보안경

Setting a standard of educational electronic block (Ver.01)

102

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

45. Three series-connected switches control three parallel-connected electrical loads Electrical load work only when the three switches are turned on.

Snap Block

스냅 블럭

보안경

44. Two switches in parallel control three parallel-connected electrical appliances Pressing the button switch or turning on the switch, both can make load work, if need load stop working, only need turn both switches off.

보안경

Setting a standard of educational electronic block (Ver.01)

103

www.Snap Block.co.kr

46. Two series-connected switches control two series-connected electrical appliances The motor can be rotated and bulb lights only when both the switch and button switch are turned off.

스냅 블럭

Snap Block Snap Block

47. Two switches in parallel control two parallel-connected electrical appliances Pressing the button switch or turning on the switch, both are can make electrical appliances work.

Snap Block

스냅 블럭

보안경

Setting a standard of educational electronic block (Ver.01)

104

www.Snap Block.co.kr

48. Three switches in series control three series-connected electrical appliances Electrical appliances work only when all three switches are turned on.

스냅 블럭

Snap Block Snap Block

49. Two switches in series control three series-connected electrical appliances Electrical appliances work only when the switch and button switch are turned on

Snap Block

스냅 블럭

보안경

Setting a standard of educational electronic block (Ver.01)

105

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

51. Three switches in series control three series-connected electrical loads The loads work only when all three switches are turned on.

Snap Block

스냅 블럭

보안경

50. Two switches in parallel control three series-connected electrical appliances Press the button switch or turn on the switch, both can make the electrical load work, if need the load stop working, just need turn both switches off.

보안경

Setting a standard of educational electronic block (Ver.01)

106

www.Snap Block.co.kr

G A

G B

G C

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block G G

52. Sound of patrol wagon Turn on the switch, the loudspeaker will give out the sound of patrol wagon.

55. Sound of fire engine Connect C to D and A to B separately, the loudspeaker will give out the sound of fire engine.

53. Sound of machine gun Connect C to D and E to F separately, the loudspeaker will give out the sound of machine gun.

56. Sound of ambulance Connect C to D and A to B separately, the loudspeaker will give out the sound of ambulance.

54. Sound of fire engine Connect C to D and A to B separately, the loudspeaker will give out the sound of fire engine.

57. Sound of Monster laugh Connect C to D and B to F separately, the loudspeaker will give out the sound of Monster laugh.

Setting a standard of educational electronic block (Ver.01)

107

www.Snap Block.co.kr

G A

G B

G C

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block G G

58. Button switch-controlled sound of patrol wagon Build the circuit, press the button switch, the loudspeaker will give out the sound of patrol wagon.

61. Button switch-controlled sound of ambulance Connect C to D and B to G separately, press the button, the loudspeaker will give out the sound of ambulance.

59. Button switch-controlled sound of machine gun Connect C to D and E to F separately, press the button switch, the loudspeaker will give out the sound of machine gun.

62. Button switch-controlled sound of game machine Move the wire 3 from the between points of C and D, separate connect A to B. Turn on the switch, the loudspeaker will give out the sound of game machine.

60. Button switch-controlled sound of fire engine Connect A to B and C to D separately, press the button, the loudspeaker will give out the sound of fire engine.

63. Button switch-controlled sound of Monster laugh Connect C to D and B to F separately, press the button, the loudspeaker will give out the sound of Monster laugh.

Setting a standard of educational electronic block (Ver.01)

108

www.Snap Block.co.kr

G A

G B

G C

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block G G

64. Magnet-controlled sound of patrol wagon Build the circuit, place the magnet close to the reed switch, the loudspeaker will give out the sound of patrol wagon.

67. Magnet-controlled sound of ambulance Connect C to D and B to G separately, and can use magnet controlled the loudspeaker to give out the sound of ambulance.

65 .Magnet-controlled sound of machine gun Connect C to D and E to F separately, and can use magnet control the loudspeaker to give out the sound of machine gun.

68. Magnet-controlled sound of Monster laugh Connect C to D and B to F separately, and can use magnet controlled the loudspeaker to give out the sound of Monster laugh.

66. Magnet-controlled sound of fire engine Connect C to D and A to B separately, and use magnet controlled the loudspeaker to give out the sound of fire engine. Setting a standard of educational electronic block (Ver.01)

109

www.Snap Block.co.kr

G A

G C

G B

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block

G G

69. Red light warning sound of patrol wagon Turn on the switch, the loudspeaker will give out the sound of patrol wagon and LED gives out the warning of red light.

72. Red light warning sound of ambulance Connect C to D and B to G separately, the loudspeaker gives out the sound of ambulance, at the same time, the LED gives out the warning of red light.

70. Red light warning sound of machine gun Connect C to D and E to F separately, the loudspeaker gives out the sound of machine gun, at the same time, LED gives out the warning of red light.

73. Flashing red light sound of Monster laugh Connect C to D and B to F separately, turn on the switch the loudspeaker gives out the sound of Monster laugh, at the same time, LED gives out the flashing red light.

71. Red light warning sound of fire engine Connect A to B and C to D separately, the loudspeaker gives out the sound of fire engine, at the same time, the LED gives out the warning of red light Setting a standard of educational electronic block (Ver.01)

110

www.Snap Block.co.kr

G G

G E

G D G F 74. Magnet-controlled red light warning sound of fire engine Connect C to D and A to B separately, place the magnet close to the reed switch, the loudspeaker gives out the sound of fire engine, at the same time , the LED gives out the warning of red light.

Snap Block G H

Snap Block

G B

G C

스냅 블럭

G A

75. Magnet-controlled glow warning sound of patrol wagon Building the circuit as the picture, place the magnet close to the reed switch, the loudspeaker gives out the sound of patrol wagon, at the same time, the LED gives out the warning of red light.

77. Magnet-controlled red light warning sound of ambulance Connect C to D and B to G separately, place the magnet close to the reed switch, the loudspeaker gives out the sound of ambulance, at the same time, the LED gives out the warning of red light.

76. Magnet-controlled red light warning sound of machine gun Connect C to D and E to F separately, place the magnet close to the reed switch, the loudspeaker gives out the sound of machine gun, at the same time, the LED gives out the warning of red light.

78. Magnet-controlled sound of Monster laugh with flashing red light Connect C to D and B to F separately, place the magnet close to the reed switch, the loudspeaker gives out the sound of Monster laugh, at the same time, LED gives out the flashing light.

Setting a standard of educational electronic block (Ver.01)

111

www.Snap Block.co.kr

G G

G E

G D G F

Snap Block G H

Snap Block

G B

G C

스냅 블럭

G A

79. Button switch-controlled red light warning sound of fire engine Connect A to B and C to D separately, place the button switch, the loudspeaker gives out the sound of fire engine, at the same time, the LED gives out the warning of red light.

80. Button switch-controlled glow warning sound of patrol wagon Building the circuit as the picture, place the button switch, the loudspeaker gives out the sound of patrol wagon, at the same time, the LED gives out the warning of red light.

82. Button switch-controlled red light warning sound of ambulance Connect A to B and B to G separately, place the button switch, the loudspeaker gives out the sound of fire ambulance, at the same time, the LED gives out the warning of red light.

81. Button switch-controlled red light warning sound of machine gun Connected E and F separately, the loudspeaker gives out the sound of machine gun, at the same time, the LED gives out the warning of red light.

83. Button switch-controlled the sound of Monster laugh with flashing red light Connect C to D and B to F separately, turn on the switch, the loudspeaker gives out the sound of Monster laugh, at the same time, LED gives out the flashing light.

Setting a standard of educational electronic block (Ver.01)

112

www.Snap Block.co.kr

G A

G C

G B

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block

G G

84. Acousto-optic low sound of police wagon Turn on the switch, the loudspeaker will produce a low pitch sound of police wagon and the LED lights at the same time.

87. Acousto-optic low pitch sound of ambulance Connect C to D and B to G separately, the loudspeaker produces a low pitch sound of ambulance and the LED lights at the same time.

85. Acousto-optic low pitch sound of machine gun Connect C to D and E to F separately, the loudspeaker produces a low pitch sound of machine gun and the LED lights at the same time.

88. Acousto-optic low pitch sound of Monster laugh Connect C to D, B to F separately, the loudspeaker produces a low pitch sound of Monster laugh and the LED lights at the same time.

86. Acousto-optic low pitch sound of fire engine Connect C to D and A to B separately , the loudspeaker produces a low pitch sound of fire engine and the LED lights at the same time. Setting a standard of educational electronic block (Ver.01)

113

www.Snap Block.co.kr

G A

G C

G B

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block

G G

89. Magnet-controlled acousto-optic low pitch sound of patrol wagon Building the circuit as shown in the diagram, place the magnet close to the reed switch, the loudspeaker gives out a low pitch sound of police wagon and the LED lights at the same time.

Connect C to D and A to B separately, the loudspeaker

90. Magnet-controlled acousto-optic low pitch sound of machine gun Connect C to D and E to F separately, the loudspeaker gives out a low pitch sound of machine gun.

93. Magnet-controlled acousto-optic low pitch sound of Monster laugh Connect C to D and B to F separately, the loudspeaker gives out a low pitch sound of Monster laugh.

92. Magnet-controlled acousto-optic low pitch sound of ambulance Connect C to D and B to G separately, the loudspeaker gives out a low pitch sound of ambulance.

91. Magnet-controlled acousto-optic low pitch sound of fire enginegives out a low pitch sound of fire engine. Setting a standard of educational electronic block (Ver.01)

114

www.Snap Block.co.kr

G A

G C

G B

G E

G D G F

G H

Snap Block

스냅 블럭

Snap Block

G G

94. Button switch-controlled acousto-optic low pitch sound of patrol wagon 95. Button switch-controlled acousto-optic low pitch sound of machine gun 96. Button switch-controlled acousto-optic low pitch sound of fire engine 97. Button switch-controlled acousto-optic low pitch sound of ambulance 98. Button switch-controlled acousto-optic low pitch sound of Monster laugh 100-104: Connect according the connection methods of 95-99, the above 6 sounds can be controlled by pressing the Button switch

Setting a standard of educational electronic block (Ver.01)

115

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

99. Acousto-optic medium pitch sound of police wagon Turn on the switch, the loudspeaker gives medium pitch sound of police wagon, at the same time, the bulb and LED lights up.

100. Acousto-optic medium pitch sound of machine gun Use two-snap connector and one-snap connector to connect D to F, turn on the switch, the loudspeaker gives out medium pitch sound of machine gun, at the same time, the bulb and LED lights up. 101. Acousto-optic medium pitch sound of fire engine Use two-snap connector and one-snap connector to connect B to D, turn on the switch, the loudspeaker gives out medium pitch sound of fire engine, at the same time, the bulb and LED lights up.

Setting a standard of educational electronic block (Ver.01)

102. Acousto-optic medium pitch sound of ambulance Use two-snap connector and one-snap connector to connect B to G, turn on the switch, the loudspeaker gives out medium pitch sound of ambulance, at the same time, the bulb and LED lights up. 103. Acousto-optic medium pitch sound of Monster laugh. Use three-snap connector and one-snap connector to connect B to F,turn on the switch, the loudspeaker gives out medium pitch sound of Monster laugh,at the same time, the bulb and LED lights up. 116

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

104. Magnet-controlled acousto-optic medium pitch sound of patrol wagon Build the circuit, place the magnet close to the reed switch, the loudspeaker will gives out the medium pitch sound of patrol wagon, at the same time, the bulb and LED lights up.

105. Magnet-controlled acousto-optic medium pitch sound of machine gun Use two-snap connector and one-snap connector to connect D to F,, place the magnet close to the reed switch, the loudspeaker gives out the medium pitch sound of machine gun, at the same time, the LED and lamp lights up. 6v 회로

106. Magnet-controlled acousto-optic medium pitch sound of fire engine Use two-snap connector and one-snap connector to connect B to D, place the magnet close to the reed switch, the loudspeaker gives out the medium pitch sound of fire engine, at the same time, the LED and lamp lights up.

Setting a standard of educational electronic block (Ver.01)

107. Magnet-controlled acousto-optic medium pitch sound of ambulance Use two-snap connector and one-snap connector to connect B to G, place the magnet close to the reed switch, the loudspeaker gives out the medium pitch sound of ambulance, at the same time, the LED and lamp lights up. 108. Magnet-controlled acousto-optic medium pitch sound of Monster laugh Use two-snap connector and one-snap connector to connect B to F, place the magnet close to the reed switch, the loudspeaker gives out the medium pitch sound of Monster laugh, at the same time, the LED and lamp lights up. 117

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

109. Button switch-controlled acousto-optic medium pitch sound of patrol wagon Build the circuit, press the button switch, the loudspeaker gives out the medium pitch sound of patrol wagon, at the same time, the LED and lamp lights up.

6v 회로

110. Button switch-controlled acousto-optic medium pitch sound of machine gun Use two-snap connector and one-snap connector to connect D to F, press the button switch, the loudspeaker gives out the medium pitch sound of machine gun, at the same time, the LED and lamp lights up.

112. Button switch -controlled acousto-optic medium pitch sound of ambulance Use two-snap connector and one-snap connector to connect B to G, press the button switch, the loudspeaker gives produces the medium pitch sound of ambulance, at the same time, the LED and lamp lights up.

111. Button switch-controlled acousto-optic medium pitch sound of fire engine Use two-snap connector and one-snap connector to connect B to D, press the button switch, the loudspeaker gives out the medium pitch sound of fire engine, at the same time, the LED and lamp lights up.

113. Button switch-controlled acousto-optic medium pitch sound of Monster laugh Use two-snap connector and one-snap connector to connect B to F, press the button switch, the loudspeaker gives out the medium pitch sound of Monster laugh, at the same time, the LED and lamp lights up.

Setting a standard of educational electronic block (Ver.01)

118

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 114. Quick flashing lamp Turn on the switch, the lamp will flash quickly. 115 Magnet-controlled quick flashing light Replace the switch with a reed switch, place the magnet close to the reed switch, the bulb will flash quickly. 116. Button switch-controlled quick flashing light Replace the switch with a reed switch, place the magnet close to the reed switch, the bulb will flash quickly.

Setting a standard of educational electronic block (Ver.01)

119

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 117. Flashing LED Replace the bulb with a LED, keep positive pole on the top, turn on the switch, the LED flashes. 118. Magnet-controlled flashing LED Replace the switch with a reed switch, place a magnet close to the reed switch, the LED flashes. 119. Button switch-controlled flashing LED Replace the switch with a button switch, press the button switch, the LED flashes.

Setting a standard of educational electronic block (Ver.01)

120

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 120. Slow flash lamp Build the circuit, turn on the switch, the bulb flash gradually.

122. Magnet-controlled slow flash Replace the switch with a reed switch, place the magnet close to the reed switch, the lamp flash gradually.

121. Slow flash LED Replace the bulb with a LED and keep positive pole on the top, turn on the switch, LED flash gradually.

123. Magnet-controlled slow flash LED Replace the switch with a reed switch and replace the bulb with a LED, keep positive pole on the top, place the magnet close to the reed switch, LED flash gradually.

Setting a standard of educational electronic block (Ver.01)

121

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 124. Button switch-controlled slow flash lamp Build the circuit, press the button switch, the bulb flash gradually. 125. Button switch-controlled slow flash LED Replace the bulb with a LED and anode is upward, press the button switch, LED flash gradually.

Setting a standard of educational electronic block (Ver.01)

122

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block 126. Motor-controlled sound of patrol wagon Build the circuit, turn on the switch, the motor gives out small sound of patrol wagon.

129. Motor-controlled sound of ambulance Connect C to D and B to G separately, turn on the switch, the motor gives out small sound of ambulance.

127. Motor-controlled sound of machine gun Connect C to D and E to F separately, turn on the switch, the motor gives out small sound of machine gun.

130. Motor-controlled sound of Monster laugh Connect C to D and B to F separately, turn on the switch, the motor gives out small sound of Monster laugh.

128. Motor-controlled sound of fire engine Connect A to B and C to D separately, turn on the switch, the motor gives out small sound of fire engine.

Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor will produce sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.)

보안경

Setting a standard of educational electronic block (Ver.01)

123

www.Snap Block.co.kr

132. Button switch-controlled motor sound of machine gun Connect C to D and E to F separately, press the button switch, the motor gives out small sound of machine gun. 133. Button switch-controlled motor sound of fire engine Connect A to B and C to D separately, press the button switch, the motor gives out small sound of fire engine. 보안경

134. Button switch-controlled motor sound of ambulance Connect C to D and B to G separately, press the button switch, the motor gives out small sound of ambulance.

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block

131. Button switch-controlled motor sound of patrol wagon Build the circuit shown in the diagram, press the button switch, the motor gives out small sound of patrol wagon.

135. Button switch-controlled motor sound of Monster laugh Connect C to D and B to F separately, press the button switch, the motor gives out small sound of Monster laugh. Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor gives out sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.) 124

www.Snap Block.co.kr

137. Magnet-controlled motor sound of machine gun Connect C to D and E to F separately, place a magnet close to the reed switch, the motor gives out small sound of machine gun. 138. Magnet-controlled motor sound of fire engine Connect A to B and C to D separately, place a magnet close to the reed switch, the motor gives out small sound of fire engine. 보안경

139. Magnet-controlled motor sound of ambulance Connect C to D and B to G separately, place a magnet close to the reed switch, the motor gives out small sound of ambulance.

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block

136. Magnet-controlled motor sound of patrol wagon Build the circuit, the motor gives out small sound of patrol wagon when the magnet close to the reed switch,

140. Magnet -controlled motor sound of Monster laugh Connect C to D and B to F separately, place a magnet close to the reed switch, the motor gives out small sound of Monster laugh. Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor gives out sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.) 125

www.Snap Block.co.kr

141. Red light motor-controlled sound of patrol wagon Build the circuit, turn on the switch, the motor gives out small sound of patrol wagon. The brightness of LED will be varied with changes of the sound at the same time. 142. Red motor-controlled sound of machine gun Connect C to D and E to F separately, turn on the switch, the motor will gives out small sound of machine gun. The brightness of LED will be varied with changes of the sound at the same time.

143. Motor-controlled sound of fire engine Connect A to B and C to D separately, turn on the switch, the motor gives out small sound of fire engine. The brightness of LED will be varied with changes of the sound at the same time. 144. Red light motor-controlled sound of ambulance The brightness of LED will be varied with changes of the sound at the same time. Connect C to D and B to G separately, turn on the switch, the motor gives out small sound of ambulance. 보안경

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block

145. Red light motor-controlled sound of Monster laugh Connect C to D and B to F separately, turn on the switch, the motor gives out small sound of Monster laugh. The brightness of LED will be varied with changes of the sound. Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor gives out sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.) 126

www.Snap Block.co.kr

146. Button-controlled red light motor sound of patrol wagon Build the circuit shown in the diagram, press the button switch, the motor gives out small sound of patrol wagon. The brightness of LED will be varied with changes of the sound at the same time. 147. Button-controlled red light motor controlled sound of machine gun Connect C to D and E to F separately, press the button switch, the motor gives out small sound of machine gun. The brightness of LED will be varied with changes of the sound at the same time.

보안경

Snap Block

스냅 블럭

Snap Block 148. Button-controlled red light motor sound of fire engine Connect A to B and C to D separately, press the button switch, the motor gives out small sound of fire engine. The brightness of LED will be varied with changes of the sound at the same time.

150. Button-controlled red light motor sound of Monster laugh Connect C to D and B to F separately, press the button switch, the motor gives out small sound of Monster laugh. The brightness of LED will be varied with changes of the sound.

149. Button-controlled red light motor sound of ambulance Connect C to D and B to G separately, press the button switch, the motor gives out small sound of ambulance. The brightness of LED will be varied with changes of the sound at the same time.

Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor gives out sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.)

Setting a standard of educational electronic block (Ver.01)

127

www.Snap Block.co.kr

151. Magnet-controlled red light motor sound of patrol wagon Build the circuit ,the motor gives out small sound of patrol wagon when the magnet close to the reed switch. The brightness of LED will be varied with changes of the sound at the same time. 152. Magnet-controlled red light motor controlled sound of machine gun Connect C to D and E to F separately, place a magnet close to the reed switch which can make the motor gives out small sound of machine gun. The brightness of LED will be varied with changes of the sound at the same time.

보안경

Snap Block

스냅 블럭

Snap Block 153. Magnet-controlled red light motor sound of fire engine Connect A to B and C to D separately, place a magnet close to the reed switch which can make the motor gives out small sound of fire engine. The brightness of LED will be varied with changes of the sound at the same time.

155. Magnet-controlled red light motor sound of Monster laugh Connect C to D and B to F separately, place a magnet close to the reed switch which can make the motor gives out small sound of Monster laugh. The brightness of LED will be varied with changes of the sound.

154. Magnet-controlled red light motor sound of ambulance Connect C to D and B to G separately, place a magnet close to the reed switch which can make the motor gives out small sound of ambulance. The brightness of LED will be varied with changes of the sound at the same time.

Notes: In this circuit, if the motor rotates but no sound, can hold the shaft of motor by hand after the motor stop rotating and place the magnet close to the reed switch at the same time, then motor gives out sound.(Warning: Do not touch the motor during operation. Do not lean over the motor.)

Setting a standard of educational electronic block (Ver.01)

128

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

156. Sound of patrol wagon with light Build the circuit, turn on the switch, the loudspeaker gives out the sound of patrol wagon. the bulb lights at the same time

157. Sound of machine gun with flashing light Connect C to D and E to F separately, turn on the switch, the loudspeaker gives out the sound of machine gun and the bulb flash at the same time.

159. Sound of fire ambulance with flashing light Connect C to D and B to G separately, turn on the switch, the loudspeaker gives out the sound of ambulance and the bulb flashes at the same time.

158. Sound of fire engine with flashing light Connect A to B and C to D separately, turn on the switch, the loudspeaker gives out the sound of fire engine and the bulb flashes at the same time.

160. Sound of fire Monster laugh with flashing light Connect C to D and B to F separately, turn on the switch, the loudspeaker gives out the sound of Monster laugh and the bulb flashes at the same time.

Setting a standard of educational electronic block (Ver.01)

129

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

161. Button switch-controlled sound of patrol wagon with light Build the circuit, press the button switch, the loudspeaker gives out s the sound of patrol wagon. the bulb lights at the same time

162. Button switch-controlled sound of machine gun with flashing light Connect C to D and E to F separately, press the button switch, the loudspeaker gives out the sound of machine gun and the bulb flashes at the same time.

164. Button switch-controlled sound of fire ambulance with light Connect C to D and B to G separately, press the button switch, the loudspeaker gives out the sound of ambulance and the bulb flashes at the same time.

163. Button switch-controlled sound of fire engine with light Connect A to B and C to D separately, press the button switch, the loudspeaker gives out the sound of fire engine and the bulb flashes at the same time.

165. Button switch-controlled sound of fire Monster laugh with light Connect C to D and B to F separately, press the button switch, the loudspeaker gives out the sound of Monster laugh and the bulb flashes at the same time.

Setting a standard of educational electronic block (Ver.01)

130

www.Snap Block.co.kr

167. Magnet switch -controlled sound of machine gun with flashing light Connect C to D and E to F separately, place a magnet close to the reed switch, the loudspeaker gives out the sound of machine gun and the bulb flashes at the same time. 168. Magnet switch -controlled sound of fire engine with light Connect A to B and C to D separately, place a magnet close to the reed switch, the loudspeaker gives out the sound of fire engine and the bulb flashes at the same time. Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block

166. Magnet switch -controlled sound of patrol wagon with light Build the circuit, place a magnet close to the reed switch, the loudspeaker gives out the sound of patrol wagon, the bulb lights at the same time.

169. Magnet switch -controlled sound of fire ambulance with light Connect C to D and B to G separately, press the button switch, the loudspeaker gives out the sound of ambulance and the bulb flashes at the same time. 170. Magnet switch -controlled sound of fire Monster laugh with light Connect C to D and B to F separately, place a magnet close to the reed switch, the loudspeaker gives out the sound of Monster laugh and the bulb flashes at the same time. 131

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 171. Whistling atmospherics Turn on the switch, the loudspeaker gives out whistling atmospherics 172. Button switch-controlled whistling atmospherics Replace the switch with the button switch, press the button switch, the loudspeaker gives out whistling atmospherics 6v 회로

173. Magnet switch-controlled whistling atmospherics Replace the switch with the reed switch, use the magnet to control the reed switch, the loudspeaker gives out whistling atmospherics

Setting a standard of educational electronic block (Ver.01)

132

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 174. Adjustable radio Build the circuit and turn on the switch. Press the selection button “CH+” “CH-” and the FM module scans for a radio station. When a station is found, it locks on to it and you hear it on the speaker, Press button “CH+” “CH-”again and again, all radio stations between 88MHZ and 108MHZ may be found. 6v 회로

Setting a standard of educational electronic block (Ver.01)

133

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 175. Low volume FM radio Build the circuit and turn on the switch. Press the selection button “CH+” “CH-” of FM radio, find out all channel about 88MHZ-108MHZ from bottom to top. The loudspeaker will produce the smaller sound of channel. 6v 회로

Setting a standard of educational electronic block (Ver.01)

134

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 176. Electrical level indication FM radio When radio is working, the brightness of LED will be varied with changes of the sound. 6v 회로

Setting a standard of educational electronic block (Ver.01)

135

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 177. Power indicator FM radio Build the circuit and turn on the switch. The LED lights, and the radio can work properly. 6v 회로

Setting a standard of educational electronic block (Ver.01)

136

www.Snap Block.co.kr

Snap Block

스냅 블럭

G AG B

Snap Block

스냅 블럭

Snap Block 178. Touch radio Build the circuit as shown in diagram and turn on the switch, you will found the radio doesn’t work, when touch the point of A and B by hand, the radio begin working. 6v 회로

Setting a standard of educational electronic block (Ver.01)

137

www.Snap Block.co.kr

Snap Block

스냅 블럭

179. AND gate Build the circuit shown, the LED lights up only when you turn on the switch and press the button switch at the same time, this called AND gate circuit.

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

Snap Block 138

180. OR gate Build the circuit shown, the LED lights up only when you turn on the switch OR press the button switch, this called OR gate circuit.

www.Snap Block.co.kr

Snap Block

스냅 블럭

181. NOT gate In this circuit, press the button switch, the LED goes out, release the button switch the LED lights up. This called NOR gate circuit.

Setting a standard of educational electronic block (Ver.01)

182. Light AND gate In this circuit, the LED lights up only when you turn on the switch and press the button switch at the same time.

Snap Block

스냅 블럭

Snap Block 139

www.Snap Block.co.kr

Snap Block

스냅 블럭

183. Light OR gate In this circuit, turn on the switch OR press the button switch, the LED lights up.

Snap Block Snap Block

스냅 블럭

184. Motor AND gate In this circuit, turn on the switch AND press the button switch at the same time, the motor rotates.

보안경

Setting a standard of educational electronic block (Ver.01)

140

www.Snap Block.co.kr

보안경

Snap Block

스냅 블럭

185. Motor OR gate In this circuit, turn on the switch OR press the button switch, the motor rotates.

Snap Block

Setting a standard of educational electronic block (Ver.01)

Snap Block

스냅 블럭

186. Alarm AND gate Build the circuit as shown in the diagram, turns on the switch AND press the button switch at the same time, the loudspeaker gives out an alarm sound.

141

www.Snap Block.co.kr

Snap Block

스냅 블럭

187. Alarm OR gate In the circuit, turn on the switch OR press the button switch, the loudspeaker gives out an alarm sound

Setting a standard of educational electronic block (Ver.01)

188. Alarm NOT gate Build the circuit shown in the diagram, the loudspeaker gives out an alarm sound. Press the button switch, the loudspeaker will stop sound, release the button switch, the loudspeaker gives out an alarm sound again.

Snap Block

스냅 블럭

Snap Block 142

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 189. Radio AND gate Build the circuit as shown in the diagram, turn on the switch AND press the button switch at the same time, the radio works. 6v 회로

Setting a standard of educational electronic block (Ver.01)

143

www.Snap Block.co.kr

Snap Block

스냅 블럭

Snap Block

스냅 블럭

Snap Block 190. Radio NOT gate Build the circuit shown in the diagram, the radio works and the loudspeaker will broadcast. Press the button switch, the loudspeaker will stop sound, release the button switch, you can hear broadcast again. 6v 회로

Setting a standard of educational electronic block (Ver.01)

144