e d i u g t c u d pro
This product guide was put together from the front seat of Stew Johnson’s van. We were on the road to Dallas for the beginning of Props Megatour 10.
FRAMES Integrated seatclamp
8.6” standover
20.7” or 21.1” toptube
Removable brake hardware
External downtube gusset Extra wide rear end tapered stays 13.25” - 13.5”
11.5” height Mid BB
The TrailOrPark is Kriss Kyle’s BSD frame, designed with technical park and trail riding in mind this steed is light, strong and ultra responsive. It has a real short back end slammable to just under 13.25” and a roomy front end due to the laid back seat tube angle. Colours: Red, Black or Grey. Weight: 4.7lbs
Offset thickness headtube
74.5°
69°
10mm or 14mm micro dropouts
Internal toptube gusset
FRAMES Mike ‘Jers
Integrated seatclamp
8.3” standover
ey’ Taylor signature
20.6” or 21.1” toptube
External toptube gusset
No brake mounts
14mm micro dropouts
External downtube gusset Extra wide rear end tapered stays 13.55”
11.5” height Mid BB
The WZA (pronounced Wozza) has been designed exactly to Mike Taylor’s specification. There are quite a few neat but different features on this frame. The dropouts are designed to fit a peg and hubguard exactly using a 25-9 gear with no overhang at all, they are also slotted forwards a little extra so you can take your wheel on and off without taking your chain apart. Note you need to use a halflink on this frame, we recommend using the Shadow halflink chain. Colours: Black or Flat raw. Weight: 4.8lbs
Offset thickness headtube
75°
71°
series
FRAMES 8.5” standover
20.5”, 20.8”, 21” or 21.2” toptube length
Integrated seatclamp
Offset thickness headtube
Removable brake hardware 71°
14mm dropouts Extra wide rear end tapered stays 13.5” - 13.75” *NOTE: 20.5” frame has 13.25” - 13.5”
11.5” height Mid BB
The Forever is the original BSD frame, with comfortable geometry this frame is built for everyone and is available in four toptube lengths. The Forever has been updated for 2011 with some changes including a new wider rear end, toptube gusset, ovalized downtube and a slotted seatclamp... Colours: Black, Flat raw or Flat white. Weight: 4.8lbs.
External toptube gusset
74.5° External downtube gusset
V2
FORKS Tapered legs
7075 steerer cap
V2
Machined one piece steerer
Integrated headset race
Investment cast 10mm dropout 32mm offset
BSD Acid face logo
Fully heat treated 41 30 chrom Chrome, o fork black, wh ite, red or raw 1.97lbs/89 0g
BARS HIGHLANDER BAR Rise: 8.5”, Width: 29” Upsweep: 2º, Backsweep: 11º Weight: 1.6 lbs Chrome, black, flat white, red or raw
WZA BAR
Rise: 8.5” Width: 28” Upsweep: 2º Backsweep: 11º Weight: 1.65 lbs Black, flat white or raw *New extra tough Mike Taylor street bar
TOO LOOSE BAR Rise: 8” , Width: 28” Upsweep: 3º, Backsweep: 13º Weight: 1.45lbs Chrome, black, flat white, red or raw
VARIETY BAR
Rise: 8”, Width: 27” Upsweep: 2º, Backsweep: 11º Weight: 1.5lbs Chrome, black, red or raw
STEMS RACE STEM
Full 7075-T6 top loader stem Internally machined CNC machined logo Hollow stem bolts for bar clamping Black, grey, polished silver, purple, blue, red or gold 280g - 10oz
BLACKNECK STEM
Full 7075-T6 front loader stem Internally machined CNC machined logo Hollow stem bolts for bar clamping Black, grey, polished silver, purple, blue, red or gold 250g – 9oz
HUBS Female 14mm axle Hollow heat treated CrMo with 3/8� bolts
Angled flanges recessed spoke holes
6061 T6 shell
Push together assembly cones pull off, hubguard pushes on
Angled flanges 6061 T6 shell 9t driver with polymer bushing Female 14mm axle Hollow heat treated CrMo with 3/8� bolts
Precision sealed 6902 Japanese bearings
Precision sealed 6902 Japanese bearings
FRONT STREET HUB *BSD Front Street hubguard available seperately
Weight: 245g
BACK STREET HUB
Female version. Weight: 416g
*BSD Back Street hubguard available seperately Male 14mm axle Hollow heat treated CrMo with 7075 nuts
9t DRIVER
3 x extra wide pawl springs for increased reliability and noise.
Male version. Weight: 418g Colours: Black, grey, polished, red, blue, gold and purple.
HUBGUARDS
Cassette #4 Jersey Barrier on BSD Back Street female hub
JERSEY BARRIER HUBGUARD Hubguards designed specifically for your hub
Cassette #1 - for Odyssey, Shadow, WTP and similar 14mm hubs Cassette #2 - for Primo Mix only Cassette #3 - for Profile and Madera only Cassette #4 - for BSD Back Street Front Street - for BSD Front Street Marmoset - for GSport Marmoset only Ratchet - for GSport Ratchet only Vandero2 - for Odyssey Vandero2 only
Cassette #4 Jersey Barrier on BSD Back Street male hub
SEATS & POSTS SLINGER seat Fat street pivotal Tear resistant Kevlar New pivotal patch Embossed logo 317g – 11.2oz
STAMP seat Slim pivotal Tear resistant Kevlar New pivotal patch Embossed logo 244g - 8.6oz
*Barspin friendly
BLITZED post 135mm pivotal seatpost 6061 aluminium Black, grey, polished silver, purple, blue, red or gold 3.5oz/100g
SKEET seat Fat street Pivotal Tear resistant Kevlar RASTA embroidery 317g – 11.2oz
SPROCKETS SUPERLITE SPROCKET Super tough 7075 aluminium construction 8mm thick at the edge for strength 6mm thick in the centre to save weight Centre bore 15/16� (comes with 19mm and 22mm steel adaptors) Black, grey, polished, purple, blue, red or gold Weight : 23t - 54g 25t - 70g 28t - 90g 29t - 94g 30t - 98g
BEARINGS SUPERLITE BB
Mid or Spanish Fully CNC’d 6061 aluminium spacers Sealed precison bearings Hollow crank arm bolt 19mm or 22mm versions Black, grey, silver, purple, blue, red or gold
INTEGRATED HEADSET Fully CNC 6061 aluminium new smaller topcap Sealed precison bearings Campy specification Black, grey, silver, purple, blue, red or gold
Antony Lille, San Sebastian, Spain. Photo by Freddy Bermond
www.bsdforever.com