EURO Q2 Workshop Solutions

3PC SETS IN 3 NEW

ONE KIT TO RULE THEM ALL 14.4V

3pc Drive Dual 80™ Technology Hard Grip Long Handle Flex-Head Ratchet Set

RAT3HLFDDT / PP / PW

DARK TITANIUM

SNAP-ON GARAGE TIPS

GET THE RIGHT TOOLS FOR THE JOB

PEARL PINK

PEARL WHITE

• Includes 3/8", 1/2" and 1/4" ratchets THE

Crankshaft Seal Installer - 1.0 & 1.1

Ti-VCT / EcoBoost - FORD

AST5252

• Quick and easy locating of crankshaft seal to the housing

• Enables accurate installing of the seal

• Avoids damage to the seal and engine housing

• Equivalent to OEM reference 303-1603

• Crankshaft pulley bolt is used in place of OEM

€32.19

5:1 Torque Multiplier Set - Ford

AST6160

• 5:1 Torque ratio, matches OE specification

€807.24

• Crankshaft pulley bolt is tightened in stages to achieve a final high torque loading

• Ensures crankshaft pulley bolt is tightened correctly every time

• Max Input torque 300Nm - through 1/2" female drive

• Max Output torque 1500Nm - through 3/4" male drive

• Includes 21mm/24mm A/F 6 sided sockets

• Equivalent to OE tools  303-1611, 303-1611-01, 303-1611-02

• Typical applications: 1.0 EcoBoost Belt-in-oil (2012-2018), 1.0 EcoBoost Chain (2017-) and 1.1 Naturally aspirated engines

• OEM Tool references included in the kit: 21-260, 303-1054, 303-1602, 3031604, 303-1605, 303-1606 & 303-732

€450.87

BLACK & EMERALD GREEN

73"/55" Classic XL Roll Cabs with Accessory Panels and Bed Liner Tops KRA1423WHF7 / KRA1422WHF7

40" Six-Drawer Flip Top Roll Cart KRSC46HZKT

GUY MARTIN

Guy Martin 40" Stack 7 Drawer Roll Cab and 8 Drawer Top Chest BOX2023APR2

Guy Martin Classic 96 Roll Cab with Bed Liner Top BOX2023APR5

4pc Guy Martin Mini Pick Set ASA204BGUY

• Contour thumb stop helps user apply maximum pressure. Special, proprietary alloy steel results in superior strength and toughness

4pc Guy Martin Long Pick Set ASAL204BGUY

• Classic SDD series handles offer unique blend of durability, comfort and easy cleanup

• Seven inch exposed shank for better clearance

7pc Guy Martin Combination Screwdriver Set SDDX70AGUY

• Features 7pc combination set

• Includes SDM211B

"Built in John Britten’s backyard, using only basic tools, very limited resources, the help of a few committed enthusiasts, and JB’s own vast talent. That the bike looked as good as it did, and even ran at all, was amazing. That it beat the best racing bikes from Italy and Japan is a feat, an accomplishment, and a miracle that’s beyond comprehension, beyond belief." Faster and Faster: Britten V1000: The Greatest Motorcycle Ever Built

• Includes 1/4" drive THLFD72HV and

• Includes 1/4" drive THLFD72HV and 3/8" drive FHLFD80AHV hard grip long handle flex-head ratchets

Guy Martin 53" Roll Cab18 Drawer with Wooden Top BOX2023APR3

Guy Martin Classic 78 Roll Cab with Bed Liner Top BOX2023APR4

Guy Martin 40" Roll Cab7 Drawer with Wooden Top BOX2023APR1

Guy Martin Ratcheting Screwdriver SSDMR4BGUY

(3/16") and SDM213B (9/32") Flat Tip bits plus SDM221IRB (#1), SDM222IRB (#2) and SDM223IRB (#3) PHILLIPS¨ ACR¨ bits

2pc Guy Martin Long Ratchets RAT2TFHLFGUY

3/8" drive FHLFD80AHV hard grip long handle flex-head ratchets

2pc Guy Martin Long Flex Ratchets RAT2TFHLFGUY

The standout colours of the unique Britten v1000 bike WERE Guy’s inspiration for his 2023 Snap-on toolboxes and complimentary tools...

and designer...well ahead of his time. Talk about innovation - was a work of art! There’s only 10 left in the world!

SERVICE ESSENTIALS

HEAVY LIFTING DAY IN, DAY OUT

BLUE-POINT® 2T LOW SERVICE JACK

SNX2LTJ

Lifting range: 68-495MM

FROM THE FJ300EUR FLOOR JACK

› Lifting range: 98-594mm

› Dual-pump pistons for speed to reach service height quickly

› Premium U-Cup seals on pumps and ram pistons for long life

› Internal filtration with magnet in pump reservoir to maintain oil cleanliness

BLUE-POINT® 2T BABY BEAST JACK

SNX2CETJ

Lifting range: 70-500MM

BLUE-POINT® 2.5T ALUMINIUM RACE JACK

SNX25ARJ Lifting range: 97-594MM

BLUE-POINT® 3T 4 PUMP BEAST SNX3-4BP Lifting range: 100-495MM

BLUE-POINT® UNDER HOIST STAND PTP502TTJA

Lifting range: 890-1885MM

BLEED, REFILL & PUMP

Pressure Brake Bleeder (3.6 bar)

ALB570BSN 12V pressure brake bleeder

Suitable for DOT3, DOT4 and DOT5.1 brake fluids

One-person operation Operates off 12V supply, vehicle battery

Fully adjustable analogue pressure regulator from 0.5 bar to 3.6 bar

€1,227.33

Truck Coolant Refiller

SVTSRAD372TA

• The first refiller designed specifically for large trucks and oversize systems; built of the highest quality parts and cut from aircraft-grade aluminium alloy

• The dual Venturi system has a higher capacity and a faster vacuum capability than smaller automotive refillers

€509.83 €373.23

2-in-1 Fuel Pump Primer/Syphon Kit

BLPFPPKIT

• Essential for re-introduction of fuel into fuel pump following maintenance such as fitting a new fuel filter or following drainage of fuel tank

€57.39 €45.63

CHARGE & PROBE

150A Flash Charger EEBC-FLASHUK

• Featuring four modes: Charge, Test, Diagnostic, and Showroom

• Perfect for use with: Key coding, Remapping, ECU & Module programming, updating software, Key-on, and Engine-off (KOEO) battery support

Multi-Probe Ultra EECT900

• Test AC and DC voltage, resistance (OHMS) and amperage in vehicle applications

• Provides audible smart-tones to indicate positive or negative tip reading, warning sounds and more

• Navigation simplified via colour-coded menu -5 menu selections are identified with a unique colour, so the user recalls the mode in use - see the screenshots below...

4 METERS IN 1 PLUS PULSE SWITCH

20'

BC20500A

• Low-resistance booster cables with heavy-gauge 100% copper strands send the maximum current to the vehicle being jumped

• 500 A clamps have recessed copper jaws and are fully insulated for safer engine starting

• Heavy-duty clamp jaws and spring bite securely onto top or side post batteries

• 20' long, 2-gauge wire remains flexible in the cold and coils for storage

25' Truck Mounted Battery Booster Cable Set

BC25500PA

• Features Heavy-duty 25' service/tow truck-mounted battery booster cable set

• Heavy-duty clamp jaws and spring bite securely onto top or side post batteries

• Mounting kit included

• Starts the engine of a stranded vehicle without lifting the service/tow truck hood

Blue-Point VR Probe

BPVRPROBE

• Allows input voltage from 0.5V - 7V in 0.5V increments to be sent to a sensor or circuit

• 1.5A output and internal safe guards are designed to put voltage into components without damaging ECU

• Bypasses components and sends desired voltage back to ECU, allowing you to test for faulty components/sensors

• Suitable for use on 12 and 24V systems. Applications include: Accelerator pedal voltage up to 5V, EGR signal voltage up to 5V, Cam & crankshaft sensors, MAP & MAF sensors, Parking sensors, Pressure, Temp & TPS sensors

Battery Booster Cable Set

BALL JOINT MASTER KIT

Cover more applications with fewer adapters than any other set...

BJP1

• Services domestic and foreign vehicle applications with press-in ball joints

• Applications cover more than 315 individual vehicle models up to 2022; more than 680 individual ball joints

Adaptor

BJP1-BKS

• For use with BJP1 for Subaru™ lower control arm compliance bushing removal and installation. Works on a variety of model year Subaru™ Outback™, Legacy™, Tribeca™, Forester™, Impreza™ and Crosstrek™ vehicles. Manufactured from special steel with higher alloy content. Industrial finish helps protect against corrosion.

BJP1-29A

• Used to remove lower ball joints on 20092013 Acura™ TL™, 2009-2013 Acura™ TSX™, 2008-2012 Honda™ Accord™ and 2010-2013 Honda™ Crosstour™ vehicles. Handles removal of lower ball joint. Works on both left and right knuckles. Industrial finish helps protect.

BJP1HONDA

• Used to remove and install upper and lower ball joints on many Honda™ and Acura™ vehicles; must be used with BJP1 Master Ball Joint/Universal Joint Press Set Includes BJP1-22 and BJP1-24 Ball Joint Adaptors, plus (2) ME7A208 O-rings

BJP1BMW1

• Applications: 1992-1999 BMW™ 3 Series™, 1996-2001 BMW™ Z3™. Manufactured from special steel with higher alloy content Industrial finish helps protect against corrosion Includes BJP1-36A and BJP1-37A. Removes stubborn ball joints with greater efficiency for increased productivity.

3pc BJP1 Ford™ Transit Connect™ Set

BJP1FORDTC

• Used to service lower ball joints on 2010-2013 Ford™ Transit Connect™ vehicles. Unique adaptors fit on complex knuckle geometry. Manufactured from superior alloy steel and heat-treated for optimum strength and durability. Designed to be used in conjunction with the Snap-on™ BJP1 Kit Industrial finish helps protect against corrosion. Set includes BJP1-33A, BJP1-34A and BJP1-35A. Easily removes stubborn ball joints for increased productivity.

BJP1-HCBS

• For use with BJP1 for Honda™/Acura™ lower control arm compliance bushing removal and installation; BJP1-14 cup required for certain applications. Fits most Honda™ and Acura™ models with 'press in' style compliance bushing from 2002-present. Adaptors engage and retain to BJP1 Ball Joint Tool to make this a one person job. Impact rated adaptors and BJP1 Ball Joint Kit components allow you to complete the job faster and more efficiently. Precision machined and heat-treated for optimum strength and durability.

BJP1OPT

• Special application set to remove and install upper and lower ball joints. Set must be used with the BJP1 Master Ball Joint/Universal Joint Press Set. Includes BJP1-22A, BJP1-24A, BJP125A, BJP1-26A and BJP1-27A Ball Joint Adaptors in a storage tray.

4pc BJP1 Subaru™ Bushing Kit

22pc Master Ball Joint/Universal Joint Press Set

Honda™/Acura™ Ball Joint Adaptor

Set for Honda™ Vehicles

Ball Joint Remover/Installer for BMW™

5pc Compliance Bushing Kit for Honda™ and Acura™ Vehicles

5pc Ball Joint Adaptor Set

€889.20

€286.65

TYRE WORK

TYRE PRESSURE MONITORING SYSTEM 5

TPMS5

• Features vehicle-specific prompts that guide TPM system relearns and software to program aftermarket TPM sensors—Wi-Fi capable to download software updates

• Test TPM Sensors to determine if a replacement is needed

• Captures sensor data and displays PSI, ID, temperature and battery status

• Automatically compares sensor ID to ECU stored values

TYRE PRESSURE MONITORING SYSTEM 4

TMPS4

• TPMS diagnostic tool tests tyre pressure monitoring sensors, captures sensor data and relearns tyre pressure monitoring systems—Also programs aftermarket sensors and prints sensor information.

DIGITAL TIRE INFLATOR

TPGDL2000

€243.83

• Backlit display, with PSI, kPa, bar and kg/m scales

• Auto-off feature turns the gauge off after 90 seconds to conserve battery life

• Vinyl-coated, braided stainless steel hose for increased strength, flexibility and protection from scratching

• 1/4" NPT hose ends for easy use with any open chuck

• Three-position trigger allows the user to quickly read, inflate and bleed off tire pressure with one hand

• Includes dual-foot and clip-on chucks, includes two AAA batteries and certificate of calibration, field repairable

CLOTHING

AVAILABLE IN SIZES M-XXL

AVAILABLE IN SIZES 32-42"

AVAILABLE IN SIZES 30-42"

Reads tyre pressure from 0-200 PSI in 0.1 PSI increments +/- 1% full-scale accuracy for precision inflation

Snap-on Red/Black Overalls

LOGOOVL4-S / M / L / XL / XXL

Snap-on Workwear Trousers

LOGOTRS32A-R / 34A-R / 36A-R / 38A-R / 40Α-R / 42A-R

Snap-on Workwear Shorts

LOGOSHORT30 / 32 / 34 / 36 / 38 / 40 / 42

€73.71 €37.44

160 Amp Mig Welder

WSPROMIG160E

• Portable inverter MIG & MMA welder

• 230V AC input

• 30Amp - 160Amp MIG welding output

• 15Amp - 120Amp MMA welding output

• 160A at 15% duty cycle

• Can be used with: 0.6mm and 0.8mm MIG wire gasless flux core wire

• 1.6mm - 3.2mm MMA electrodes

WELDING

180A Mig Welder

WSPROMIG180E

• Comes complete with 3m MIG torch, Argon gas regulator and detachable work return lead and clamp

• Full high quality electronic inverter control, gives stepless adjustment of voltage and wire speed for the very best welding conditions in all applications across the entire output range

• Digital ammeter for visual indication of welding power Welds thin automotive materials and thicker steel up to 4mm

Welding/Plasma Cart with Single Tank Storage (Black)

MIGCARTC

• Stores MIG/TIG welders and plasma cutters, along with accessories and consumables

• Sturdy design has a total weight limit of 165 lb

• Multiple cord hooks provide storage

• Stores a single cylinder of shielding gas

SHOP EXTRAS

ABOUT SPARE BAGS

SOVAC16UK-4

Phantom Auto-Darkening Welding Helmet with Light

WELDIGNPHNTM

• IGNITE Series, featuring 360° LED with light-balance technology and multifunction light. Flip-out light is fully integrated into contour of the helmet when not in use

• 180° view with fixed shade; 10 side lenses create excellent peripheral field of vision compared to standard 'bread box'-style helmets

• HD viewing with True Color technology

• Full wrap-around slag shield

Soda Blaster JWLSB2

• Easily removes paint, carbon deposits, grease, rust, gasket material, adhesives and other coatings

• For use on metal, plastic, wood and composite surfaces without damaging the substrate

• Reduces the need for masking and grinding

INCLUDES BLAST MEDIA WORTH €79.62

Soda Blast Media - 2 Pack SODABLAST Sodium Bicarbonate, NaHCO3, pH 8.6

Face Shield (Blue-Point¨)

GA225

• Adjustable, cushioned headband is removable

Face shield provides impact resistance Includes GA225-1 Visor with PETG (impact resistance preferred) Measures approximately 7-3/4 x 15-1/4" Optional GA225-2 Visor with PC (high temperature resistance) is available

Wet & Dry Vac 60L SOVAC16UK

• 60L Stainless Steel tank

• Large drain port with disposal hose

• Extra-long 7.5m cord

• Includes utility nozzle, dust brush and crevice tool

Protective Fender Cover (Black)

JCK7DBL

• Measures 26 x 36" - for use on shorter fenders of most new vehicles

• Raised ribbing along center section provides space to hold tools

€194.92 €34.75

€63.06 €52.77

€483.09 €373.23

€314.73

€821.87 €817.83

€1,319.88 €1,285.83

€584.77 €507.78