CHARGE & PROBE

150A Flash Charger EEBC-FLASHUK

• Featuring four modes: Charge, Test, Diagnostic, and Showroom

• Perfect for use with: Key coding, Remapping, ECU & Module programming, updating software, Key-on, and Engine-off (KOEO) battery support

Multi-Probe Ultra EECT900

• Test AC and DC voltage, resistance (OHMS) and amperage in vehicle applications

• Provides audible smart-tones to indicate positive or negative tip reading, warning sounds and more

• Navigation simplified via colour-coded menu -5 menu selections are identified with a unique colour, so the user recalls the mode in use - see the screenshots below...

4 Meters In 1 Plus Pulse Switch

20'

BC20500A

• Low-resistance booster cables with heavy-gauge 100% copper strands send the maximum current to the vehicle being jumped

• 500 A clamps have recessed copper jaws and are fully insulated for safer engine starting

• Heavy-duty clamp jaws and spring bite securely onto top or side post batteries

• 20' long, 2-gauge wire remains flexible in the cold and coils for storage

25' Truck Mounted Battery Booster Cable Set

BC25500PA

• Features Heavy-duty 25' service/tow truck-mounted battery booster cable set

• Heavy-duty clamp jaws and spring bite securely onto top or side post batteries

• Mounting kit included

• Starts the engine of a stranded vehicle without lifting the service/tow truck hood

Blue-Point VR Probe

BPVRPROBE

• Allows input voltage from 0.5V - 7V in 0.5V increments to be sent to a sensor or circuit

• 1.5A output and internal safe guards are designed to put voltage into components without damaging ECU

• Bypasses components and sends desired voltage back to ECU, allowing you to test for faulty components/sensors

• Suitable for use on 12 and 24V systems. Applications include: Accelerator pedal voltage up to 5V, EGR signal voltage up to 5V, Cam & crankshaft sensors, MAP & MAF sensors, Parking sensors, Pressure, Temp & TPS sensors