36"Epiq Workstations
3 colours available; Black with Red trim
Candy Apple Red with Black trim
Supersonic Blue with Orange trim
Almost as much storage as a 40" stack! with the practicality of a work-surface and work-centre to lock everything away at the end of the day.
KERN361 ROLL CAB FEATURES
How about the ultimate diagnostic set-up? Protect your diagnostic machine inside a work-centre.
Maximum load capacity: 3,629Kg – plenty of capacity for your tools and expanding upwards! 103Kg rated runners (2 drawers with double runners)
Full drawer extension, making the most of the 30" deep design
Epiq Strength; Designed for a lifetime of use with more load capacity, the roll cab features a combination of traditional corner gussets and standing seam support to create the strongest Snap-on Roll Cab design.
InPulse drawer action; flush finish drawers with uncompromising strength are easier to open, easier to close, and do not drift open.
ISO-Ride+ Swivel lock mag wheels with compression puck suspension provide a smooth ride over rough garage floors.
ASK YOUR FRANCHISEE FOR MORE INFO
YOUR DREAM BOX STARTS HERE!
Continue to add-on as your toolkit continues to grow!
Power CordlessTools
18V 3/4" Drive MonsterLithium Cordless Impact Wrench (Tool Only) (Red) CT9100DB
• 1,763Nm of bolt breakaway torque and 1,355Nm of working torque
• Three torque settings adapt to various applications
• Brushless motor for longer run time and durability
• Super bright 100 lm LED light output
• Variable-speed trigger for precise control
• Batteries and charger not included
• 25,000 RPM handles the big jobs
• Spindle lock for easy changing of accessories
• Tight-tolerance collet for exact concentricity
• Overload protection prevents tool from overheating
• Start-up protection prevents tool from starting after battery change
• Ergonomic design for positive tool control
• Standard 1/4" collet accepts most accessories
• Battery rotates 270° for improved access
• Paddle-style trigger for ease of use
• Includes tool and (1) battery BATTERY
18V MonsterLithium Cordless Reciprocating Saw CTRS8850DB
• 2,400 strokes per minute
• 75 A rated, heavy-duty variable-speed trigger provides long life and is contoured to reduce fatigue
• Heavy-duty 14-gauge internal wiring withstands high current loads during heavy sawing
• Spring-loaded blade retention system requires no tools and easily ejects broken blades
• Non-slip cushion grip nose reduces vibration and provides positive tool control
• Heavy-duty armature and balanced motor design for smooth operation
14.4V MicroLithium Cordless 360° Angle Head Mini Drill (Tool Only)(Red)
CDRR2005360DB
• Small compact head for greater access into places traditional pistol style drills cannot
• Low runout for precise accurate drilling
• Accepts 1/4"-28 threaded bits and accessories and standard 1/4" accessories with adaptor (not included)
• Double ball bearing supported spindle shaft for durability
• Spiral beveled gears for durability and smooth operation
• 360° angle head for great accessibility
• Built-in LED illuminates work area
• Soft grip handle for positive tool control
• Batteries and charger not included
18V MonsterLithium Cordless Grease Gun (Tool Only) CGG8850ADB
• Two-speed, high-torque 18V DC motor delivers outstanding flow and pressure
• 36" high-pressure hose with spring guard and coupler
• Accessible check valve and combination air bleeder/filler valve
• Dual motor protection includes self-resetting thermocoupler
• Machined and hardened piston with plated steel barrel and premium grease follower
• Ergonomically designed to reduce fatigue and increase productivity
• 18V high-amperage lithium-ion battery provides outstanding run time (battery not included)
• Batteries and charger not included
18V MonsterLithium Cordless Caulk Gun (Tool Only) (Red)
CTCG8850DB
High feed force to easily dispense material, even when cold Dispense rates from 2-18 inch/minute allows user to fine tune material dispensing Piston retracts automatically when trigger is released to stop material from dispensing—saves time and material
Dispenses up to 400 tubes of caulk on a single charge Light weight for easy manoeuvrability
Very low noise level and vibration reduces user fatigue
18V MonsterLithium Rivet Gun CTRG9050DB
• 4,400lb of pull force for precise accuracy
• LED light illuminates the work area
• Produces over 6,000 rivets on a battery charge to get the work done
• Operates with 1/8", 5/32", 3/16" and 1/4" rivets
14.4V MicroLithium Cordless 45° Angle Head Mini Drill (Tool Only) (Red)
CDRR200545DB
• Small compact head for greater access into places traditional pistol style drills cannot
• Low runout for precise accurate drilling
• Accepts 1/4"-28 threaded bits and accessories and standard 1/4" accessories with adaptor (not included)
• Double ball bearing supported spindle shaft for durability
• Spiral beveled gears for durability and smooth operation
• 45° angle head for great accessibility
• Built-in LED illuminates work area
• Soft grip handle for positive tool control
• Built-in gauge indicates battery charge
• Variable-speed trigger for slow start-up
• Proven lower unit and head
• Batteries and charger not included
14.4V MicroLithium Cordless Right Angle Mini Drill (One Battery) (Red) CDRR2005W1
• Compact 90° head for greater access
• Low runout for precise drilling
• Accepts 1/4"-28 threaded bits and accessories
• Double ball bearing-supported spindle shaft for durability
• Spiral beveled gears for durability and smooth operation
• 90° angle for great access
• LED light illuminates work area
• Soft grip handle for positive tool control
• Built-in gauge indicates battery charge
• Includes tool and (1) battery
Tools
3/4" Drive Heavy-Duty Long Anvil Magnesium Air Impact Wrench MG1250L
• 1,200 ft-lb (1,627 Nm) of torque output removes tough fasteners
• Perfect for servicing large equipment and tires on mid-sized fleet vehicles
• Six-vane rotor for faster motor start-up
• Signature twin-hammer impact mechanism and sealed-in oil bath lubrication provide durability and a longer tool life
• Lightweight one-piece magnesium housing cuts tool weight to a mere 8.1 lb for superior control and less user fatigue
• Anvil stops when trigger is released to avoid throwing fasteners• Powerful twin-hammer mechanism—fewer moving parts, less down time
1/2" Drive Compact Impact Wrench (Blue-Point®) AT2550
• 300 ft-lb of torque
• Jumbo hammer mechanism
• Thumb-operated forward/reverse lever
• Three forward speeds and one reverse speed
• Exhaust is released through the bottom of the handle, away from the work area
• One year limited warranty
3/4" Drive Heavy-Duty Pinned Anvil Magnesium Air Impact Wrench MG1250P
• 1,200 ft-lb (1,627 Nm) of torque output removes tough fasteners
• Perfect for servicing large equipment and tires on mid-sized fleet vehicles
• Six-vane rotor for faster motor start-up
• Signature twin-hammer impact mechanism and sealed-in oil bath lubrication provide durability and a longer tool life
•
• Anvil stops when trigger is released to avoid throwing fasteners
•
3/8" Drive Long-Neck Air Ratchet (Red) PTR838
• Long neck ratchet with extra-long reach for those hard-to-reach fasteners
• Soft grip handle provides increased comfort and insulation from the cold while reducing vibration
• Larger forward/reverse knob makes it easy to switch directions even with greasy hands
• Zerk fitting allows ratchet head to be lubricated for longer tool life
• Manual torque load of 46 ft-lb
1" Heavy-Duty Impact Wrench (Red) PT1800A
• Lightweight design (16 lb)
• Powerful 1,800 ft-lb of torque output
• Three-speed forward and full-power reverse
• Padded ergonomic side handle for comfortable use
• Rubber nose bumper for tool durability and work piece protection
• Side-directed (reversible) exhaust for cleaner work
• Hard-hitting and durable twin hammer impact mechanism
1" Heavy-Duty 8" Long Anvil Impact Wrench (Red) PT2500L
• Twin hammer for durability
• Powerful 2,500 ft-lb of torque output
• 3-speed forward and full power reverse
• Padded ergonomic side handle for comfortable use
• Aluminum housing
1" Heavy-Duty Impact Wrench (Red) PT2500
• Twin hammer for durability
• Powerful 2,500 ft-lb of torque output
• 3-speed forward and full power reverse
• Padded ergonomic side handle for comfortable use
• Aluminum housing
BELT DRIVEN
ROTARY SCREW
THE POWER INSIDE
Diagnostic Add-on
Tyre Pressure Monitoring
Diagnose Sensors and Relearn TPMS
• Test TPM Sensors to determine if a replacement is needed.
• Captures sensor data and displays PSI, ID, temperature and battery status.
• Automatically compares sensor ID to ECU stored values.
• Registration of proper sensor locations after tire rotation.
• Features vehicle-specific TPMS system relearns and resets
• Enhanced OBD-II vehicle connectivity to write sensor IDs and relearn TPM systems.
• Includes software to program aftermarket TPM sensors Tests key fobs for proper signal strength and battery condition.
• Includes replacement TPM sensor part number and image lookup for OEM and aftermarket.
• Features a full colour 5.0" daylight readable LCD 1,280 x 720-pixel touch panel.
NEW MANUFACTURER - TESLA
Covering popular models
IS YOUR TPMS5 YOU UP TO DATE?
Do you own TPMS5 and come across a sensor you couldn’t programme? Are you on the latest software, it could be time to update. Our new updates include new sensor, and recently added aftermarket NDsens, Max Gen5 sensors.
ASK YOUR FRANCHISEE FOR MORE INFO ABOUT UPDATES
VR Probe Kit
Blue-Point VR Probe BPVRPROBE
• Allows input voltage from 0.5V - 7V in 0.5V increments to be sent to a sensor or circuit
• 1.5A output and internal safe guards are designed to put voltage into components without damaging ECU
• Bypasses components and sends desired voltage back to ECU, allowing you to test for faulty components/sensors
• Suitable for use on 12 and 24V systems. Applications include: Accelerator pedal voltage up to 5V, EGR signal voltage up to 5V, Cam & crankshaft sensors, MAP & MAF sensors, Parking sensors, Pressure, Temp & TPS sensors
Battery Care
WORKSHOP WORKHORSE CHARGE, MAINTAIN, STABILISE & BOOST
ADAPTIVE: Performs a unique charge cycle for each lead-acid battery type: standard, AGM, GEL, EFB, deep cycle now with a 12V Lithium Iron Phosphate (LiFePO4) mode
PLUS: Exclusive flash reprogram power supply maintains consistent OEM-specified voltage up to 100 A for three minutes
VERSATILE: Charges lead acid 6V and 12V batteries and 24V (12V in a series) battery packs with a 4 A maintain rate, a 15 A fast rate or a 60 A boost mode; charges 12V LiFePO4 Batteries at 4 or 15 amps; 24V output 30 A continuous and 250 A boost
INTELLIGENT: Automatic microprocessor-controlled operation selects algorithm to optimise the cycle without overcharging
INFORMATIVE: In maintain and fast rates, the unit displays the vehicle battery voltage and percent of charge
STREAMLINED: Higher working-height handle helps relieve back strain with an excellent design that looks like no other charger
POWERFUL: 300 A engine start with a 20 second crank time at the 12V setting
CONVENIENT: Upper and lower battery service tool storage trays
TOUGH: 10" foam-filled tires with a C-clip retention ride on a solid steel axle
12V Battery Booster
EEJP12VUK
12/24V Engine Starter Trolley
EEJP1224VTUK
• 2500 Peak Amps / 950 Starting Amps
• Reverse Polarity Alarm
• Built-in Safety Fuse and On/Off Switch
• Industrial Clamps and Casing
• Built-in USB Charger
clamps
• Heavy-duty clamp jaws and spring bite securely
or side post batteries
• 5000/2500 Peak amps
• 1900/950 Cranking amps
• Reverse polarity protection
• 170cm long cables
• 2 wheel trolley design with pull out handle
12V Basic Battery System Tester EECS150
• Tests autos, trucks, motorcycles, ATVs and more
• Features comfortable horizontal handhold position, soft grips and easy-to-access buttons
• Menu and test results are viewable on the backlit screen
• Select from eight languages for on-screen commands
• Reverse polarity protection
Hand Tools
Seal Driver Set A1310LHSB
• Includes popular sizes 3-43/64, 4-13/16, 4-7/8, 5-1/2, 5-25/32 and 6", plus a heavy-duty striking handle in a convenient storage case
• Durable steel disks designed for use on large trucks
Heavy-Duty Manual Interchangeable Master Puller Set CJ2500
• Includes: Pressure Screw and Point, 2x Lock Plate, Spring, Adjusting Nut, 2-1/2lb Slide Hammer, 2x 3-Jaw Yoke, 3x Long Jaws, Pressure Screw and Point, 3x 15" Jaws, Screw Adaptor and Point, Slide Screw with Center Point, 2-Jaw Yoke, 3x 5-1/2" Jaws, 3x Special Grip Jaw Pullers, Adjustable Lock Nut, 3-3/4lb Slide Hammer, 3/4" Lock Nut and 5/8"-18 Nut
• Puller jaws easily lock onto work surface for both "Inside" and "Outside" pulling applications
• Reversible jaw design, 2-position yokes that accommodate multiple jaw lengths
• Spring loaded mechanism allows quick changeover without the disassembly of the puller
Cable Cutter (Blue-Point®) PWC80A
• For cutting battery cables and other soft metal cables
• Vinyl-covered handles
• 7-1/2" long
15pc Metric Stud Remover Set (M6-1.00-M16-2.00) CJM515B
• Includes 14 metric collets M6-1.00-M16-2.00 and 1 stud collet housing
• Collet geometry engineered to grip pins or studs nearly flush with the work surface
• Forwards/backwards compatible with corresponding CG series collets and housings
• Bright and clean nickel-chrome finish creates a corrosion resistant surface
Radiator Hose Pick Set SGRHTLB3BR
• Includes SGA176BR, SGA177BR and SGCP1BR
• Ideal for removing and replacing hoses and clamps
• Unique hose blade design for getting around difficult obstacles
• Torque: 120-600 ft-lb
• Virtually maintenance-free sealed ratchet heads keep out dirt and moisture
• Cannot be accidentally disassembled if wound down the past scale
• Accurate readings to ±4% CW and ±6% CCW from 20% of full scale to full scale
General Purpose 2-1/2lb Slide Hammer Set with PRO-FI™ Organization CJ250HMRFR
Heavy-Duty General Purpose
3-3/4lb Slide Hammer Set with PRO-FI™ Organization CJ270HMRFR
• 3.8lb slide hammer provides max transfer force on the part to be removed
• Slide screw has rolled threads instead of cut threads for optimum durability
• Slide screw is heat-treated for optimum strength and durability
•
• Slide screw threads are interchangeable with many Snap-on® puller yokes
58pc Master Stud Remover & Dowel Pin Puller Set CJ5151
Includes SAE stud collets 1/4"-20-5/8"-18, SAE dowel pin collets 1/4-5/8" MET stud collets M6-1.00-M16-2.00, MET dowel pin collets 6-16mm, stud hex collets, serrated collets, stud NPT, 3/8" square collet, collet housing in a storage case
Removes threaded studs and dowel pins Protect the stud threads from marring
7pc Metric Dowel Pin Puller Set with PRO-FI™ Organization CJM503
• Includes 6 metric collets 6-16mm and 1 dowel pin collet housing in a PRO-FI™ organizer
• Collet geometry engineered to grip pins or studs nearly flush with the work surface
• Forwards/backwards compatible with corresponding CG series collets and housings
• Bright and clean nickel-chrome finish creates a corrosion resistant surface
13pc Medium-Duty General Purpose Puller Set CJ250 Spring loaded locking mechanism allows the puller jaws to easily lock onto work surface for both "inside" & "outside" pulling applications 2-position yokes accommodate multiple jaw lengths Quick changeover without the disassembly of the puller and without the need of nuts and bolts resulting in faster set-ups and fewer man-hours Reversible jaw design
Includes (14) SAE stud collets 1/4"-205/8"-18, (1) stud collet housing, (7) SAE dowel pin collets 1/4-5/8" and (1) dowel pin collet housing Removes threaded studs and dowel pins
Protect the stud threads from marring Can be used with CJ250HMRFR slide
22pc Metric Stud Remover and Dowel Pin Puller Set CJ5153
& WorkshopWelding
• Stores MIG/TIG welders and plasma cutters, along with accessories and consumables
• Sturdy design has a total weight limit of 165lb
• Multiple cord hooks provide storage
• Stores a single cylinder of shielding gas
500psi Wireless Pressure Tester Set with Free App EEPV700-MSTR
• Includes the digital display transducer unit and all the necessary adaptors in one convenient kit
• Tests compression, vacuum, fuel,
Workshop Press CAM20S
•
•
•
•
Auto-Darkening Welding Helmet with Grind Feature and Wide-View Lens YA4618
• Convenient external shade controls and grind lockout mode
• Solar-powered lens with easily replaceable AAA battery backup
• Extra-large viewing area: 3.73 x 3.34"
• Sensitivity and delay adjustments
Digital Timing Light (Blue-Point®) EETL5568A
• Multifunction timing light works on all distributorless and conventional ignition systems
• Patented skip circuitry tests tachometer readings up to 9,900 RPM
•
•
250A Multi Process MIG Welder WSPRO251
Inverter technology provides high speed arc reaction for very smooth bead and outstanding arc control which is easy to set 250 Amps output for heavy duty welding Multi-process - welds MIG, DC TIG and MMA 2T + 4T torch switch control, Post gas delay DC TIG welding for steel and stainless steel Supplied with MIG torch and regulator
Do you own a compact welder, such as WSPROMIG160E?
Tired
Accessories
Blue-Point® Ear Protectors
GA3200
• 28dB noise reduction rating
• Lightweight and comfortable with cushioned head band
• Cushioned earpieces for a comfortable and snug fit that keeps out noise
• Earpieces pivot to provide a comfortable and secure fit
• Blue hard protective ear cups with Blue-Point® logo in white
25’ SAE/ Metric Tape Measure TPMB25EM/ ORG/ GRN
• Pocketable design fits in tight areas underhood & under dash
• Magnet on side for attaching to tool storage or other metal surface
• Automatic locking brake mechanism with positive release button
• Tape rule is printed on both sides for multiple measuring applications
High-Power Magnetic Mat
MAGMATXLR/ G/ HV
• Extra long, with innovative hinge design to fold in half for increased holding power
• Ideal for use on vehicle lifts, tool carts, hutches, lockers and other ferrous surfaces
• High-power rare-earth magnets hold tools and parts securely in place
• 24" Length x 5-1/2" Width
Butane Gas Soldering Iron Kit (25-75W) YAKS41/ G/ O/ HV
• Includes attachments for soldering and hot air
• Compact design for easy access with ignition switch for one-handed operation
• Fuel adjustment knob, for quick temperature adjustment
• Magnetic stand is integrated into the bottom of tool
Did you know we also sell your EVERYDAY CONSUMABLES?
Ask me about our grinding discs, cutting wheels, blades, hand cleaner, disposable gloves and tool cleaning products!
Black Nitrile 5mil
100 Count Per Pack
Mechanix Wear brand
5mil thickness
Latex free
Powder free
Textured/micro roughened
Grey Nitrile 6.2mil
50 Count Per Pack
• 6.2mil thickness
• ANSI® high abrasion 3
• Sweat absorbing nitrile gloves
• Latex free and powder free
• Dritrek comfort technology
Large
MXWD3510-100
Medium
MXWD7809-050
Large
MXWD7810-050
X - Large
MXWD7811-050
Gloveworks Nitrile Gloves
100 Count Per Pack
• Textured for superior grip
• Superb tensile strength
• Powder free
• Latex free
• 5mil thickness
Impact SuperCuff® Gloves (Red)
GLOVE501RMC/ LC/ XLC/ XXC
Impact SuperCuff® Gloves (Black)
GLOVE501BMC/ LC/ XLC/ XXC
• SuperCuff® design provides a super comfortable, snug and secure fit without restricting movement
• New reduced seam design for the index finger
• Full finger dorsal thermoplastic TPR protection
• Two-layer fingertips for longer life
• Silicone-printed Snap-on® logo on palm
• TPR stitching increases flexibility
• Textured reinforcements on palm side fingertips for better grip on dry surfaces
• New reflective fingertips for increased visibility
•
• Robust trolley to prevent
“I just
now!
wish
I’d
joined 20 years ago…
Imagine where I’d be
I’m financially secure, have the freedom to do what I want, when I want
and
just enjoy life!” Anton Mitchell, franchisee.
Our franchisees have average sales of over £7k per week. Fancy joining them?
Snap-on top facts!
> Franchisees get support from 250 employees day in, day out.
> Snap-on is 104 years old and has been in the UK 59 years.
> Voted the UK’s number 1 franchise brand for 2020, 2023 and 2024!
With Snap-on you can:
> Make money... and keep it!
> Spend time with your family.
> Enjoy the freedom of being your own boss.
> Own and run a business you LOVE.
We have over 400 UK franchisees in the UK and Ireland. When you join them, you’ll be fully trained in all aspects of the business. Once you’re out on the road, you’re never alone, we have over 200 UK support staff dedicated to your success! As a franchisee you will enjoy impressive sales margins and low overheads and keep 100% of your profits. If you want a simple, effective business then Snap-on is perfect for you.
Contact us today to find out more.
Help to buy available! You pay just £15K plus working capital*
*Varies according to individualised expenses
HOW MANY TESTS DOES TRITON D10 COVER? 6 MILLION INDIVIDUAL FUNCTIONS
TRITON-D10™ with Fast-Track® Intelligent Diagnostics. The complete multifunction diagnostic scan tool that gets you to the information you need to make the repair fast. Featuring a built-in scope to help you quickly identify and verify faulty components. You have access to Diagnostic Trouble codes and data, but you need to do more to correctly diagnose and fix the fault first time. It could be the component, wiring or even ECU. Test Don’t Guess, with Triton D10, you will have access to over 1 million guided component tests. Helping you become more efficient, Saving time and money.
APOLLO-D9 provides the information and resources you need to get the job done. It even gives you access to Fast-Track® Intelligent Diagnostics from Snap-on — for filtered codes and vehicle-specific data to help you find the right fix, fast. No more hunting through forums or endlessly searching to find the right answers. No more wondering which fix is the right one for the job at hand.
Have you ever had an issue accessing a special function such as DPF regeneration that the OEM has restricted due to security? We have the solution: Visit snapon.com/securitylink-uk for details
