I aM AN ENGINEERING MARVEL
THE WORLD’S BEST RATCHETS JUST GOT A WHOLE WORLD OF IMPROVEMENTS
We didn’t just improve our ratchets. By adding 20 more gear teeth and reducing the head profile while still maintaining a completely sealed head we practically reinvented them.
All to provide as much access and turning power in a low-profile head as physically possible. It’s a revolutionary engineering feat that no one else has ever achieved.
They also feature a reduced swing arc of 3.6 degrees, making it even easier to work in tight spaces. And an upgraded steel reverse lever for added durability.
The result is better performance, increased accessibility, and more strength and resilience than ever before. All in one highly advanced, low-profile package. Some would call that synergy. We call it Cynergy.
The new Cynergy Series of ratchets from Snap-on.®
441 NM TORQUE
Powers through those tougher overtightened bolts with ease
ELECTRONIC PROTECTION
Protects your important drill electronics in a resin encased metal housing
To always keep you on the go
90 MIN CHARGE TIME
14.4V and 18V Dual Bay Charger CTCEU131A
• Dual bay: Charges 14.4V MicroLithium and 18V MonsterLithium batteries
• Integrated USB port: Charges phones and small electronic devices
• Wall mountable: Easy to hang for out-of-the-way use
14.4V 2.5Ah MicroLithium Battery CTB8174
• 14.4V 2.5Ah high-capacity lithium battery (36Wh)
• Fast 70-minute charge time
18V 3/8" Drive MonsterLithium Cordless Impact Wrench + 1 Battery CT9010W1
• 441nm of bolt breakaway torque and 325nm of working torque output
• Three torque settings adapt to various applications
• Brushless motor for longer run time and durability
CAGED BRUSHLESS MOTOR
• Super bright 100lm LED light output
Perfectly designed to reduce noise and increase efficiency
ASK ME FOR A TRADE!
18V 5.0Ah MonsterLithium Ion Slide-On Battery CTB8187
• 18V 5.0Ah high-capacity lithium battery 90Wh
• 90-minute charge time
• Glass-filled nylon housing for durability
18V 5.0Ah MonsterLithium Battery with Dual Side Latches CTB185
• No self discharge, will not lose charge when idle
• Four built-in LEDs indicate battery charge state
• 90-minute charge time
All prices exclude VAT. Offers available while stocks last.
BUILD YOUR 18
V ARSENAL
18V MonsterLithium Cordless Vacuum CTVAC9050A
• 11.5L wet or dry tank eliminates the need for 2 specialised vacuums
• Powerful 18V motor delivers 59CFM of volume to handle a wide range of materials
• Industry-leading suction is ideal for broken glass, rocks, coins, sand and much more
• Oversize power switch is easier to use, even with gloves
18V Cordless Inflator CTINFU9050
• Features a heavy-duty 30mm, high-volume piston compressor motor
• Thermal shut-off protection circuit
• Assorted nozzle inflators included
• Powered by 18V Snap-on battery (not included)
€228.85
18V MonsterLithium Cordless Blower CTAB9050
• Brushless motor means superior durability, longer tool life and maximum run time
• Get the job done with a maximum air speed of 100mph
• Maximum air volume of 450CFM and 14,800RPM for quick turnaround time
• 15' clearance range
• High/Low switch for proper air speed
• 450lm and 120° of individual light rotation so you're never kept in the dark again
• Ideal for engine bay work, under car inspections, brake repairs, electical repairs, suspension and steering work. Anything where visability is key and with their erganomic deisgn you wont want to take them off
• Complete hands free lighting
Composite shank extends from the head through the handle, delivering a more powerful blow and dampening vibration
Internal steel canister with free-flowing shot transfers maximum force through every single swing
Multi-position hand grip allows user to choke up in tighter work areas
Wide flare at end of the handle helps prevent hammer from slipping out of user’s hand
• Free flowing shot design to improve dead blow action whilst reducing rebound
• Compact head has larger surface striking area and heavier caps to improve delivered force by as much as 40%
• Soft grip handle with ribbed, textured elastomer grip prevents hand slippage
• Composite handle shank improves balance while diffusing shock and dampening vibration
•
• Flared end of the
• Blade
CENTER
Used to mark centre points or as a guide to stop drills from wandering.
STARTER
A thicker punch that tapers to the required diameter, this allows for greater force transfer.
DRIFT PIN
These are often used to align components prior to inserting a fastener.
PARALLEL PIN
Straight sides allow you to drive through a pin, without binding up in the bore.
PIN, PUNCH & PRYBAR
PARABOLIC CURVE
Directs the striking force to center of the punch; Prevents mushrooming, reduces splitting
REDRESSABLE
Cutting edges can be reground with a cutting guide; Product lasts longer
Heavy-Duty 48" Gooseneck Prybar PBHG48
• Prybars feature a rubber grip that eliminates contact with rust and protects the bar from damage
• Grip offers a non-slip surface that provides a secure gripping surface
• Gooseneck model has a wide radius and 2-1/4" tip with V-notch for use on crating/fastener prying applications
12pc Pin and Starter Punch Set
PPSD120BK
• 12pc in KB2187 kit bag
4pc Drift Pin Punch Set
PPLT40AK
• 4pc in KB2174 kit bag
Diagnostic results in as little as 30s + 1-Touch Code Scan & Code Clear + Super-fast boot up +
Windbacks, services, brake pads and regens are just a few of the extra jobs that you could do to earn some more money on top of your 9-5, while you grow your skills & confidence diagnosing vehicles.
Already trusted by technicians worldwide, our SOLUS platform has been redesigned and upgraded to be the ultimate scan tool for your everyday maintenance and repair work. With exclusive SureTrack® verified repair information, and comprehensive coverage, SOLUS+ provides all the features you need to handle a broad range of diagnostics — without the complex functions you don’t. It’s going to plus your capabilities from day one.
The diagnostic tool for every technician just got a glow up with 1/3rd OFF ALL SOFTWARE & SUBSCRIPTION! Join the thousands of technicians investing in their own dianostic tool & ask your franchisee what kind of deal you could walk away with today!