Repowering Solar Power Plants: Why and How to do it? solarsmiths.com/blog/knowledge/repowering-solar-power-plants-why-and-how-to-do-it
As human beings, we tend to lose our stamina and energy; hence, to regain it, we consume vitamins and nutritional supplements, which leads us to go. In the same way, in the case of solar plants, with time, their efficiency also gets reduced due to various internal and external environment; hence, in that case, you can consider repowering. It will align you to maximize the productivity of a commercial solar power plant and increase its longevity.
Let us understand in detail what is it all about? What is Solar Repowering? Solar repowering replaces old components of the solar power plant, which are outdated, old or damaged to technology, with new ones. It is the best way to economically attractive and same time their performance has significantly increased. The regenerated system delivers again 100% target performance at the old, high compensation rates – if you have done everything legally correct. It is the best way to be applied for existing solar plants and can be used for extending the life of new solar plants at the end of their initial design life, projected at about 20 to 25 years. Also Read: Tackle Pollution through Solar Energy Why is Repowering needed? The primary common technical reason for repowering is the so-called degradation of the solar module: over time, every module loses a bit of performance. Hence the upgradation mandate solution to increase solar energy production levels. Degradation of the crystalline modules is a primary reason for lower levels of efficiency, something that it can easily replace through repowering. The outcome of crystalline PV modules drops by a maximum level of 15% over 25 years, a linear drop in performance. One should also keep a regular track of what normal deterioration is happening over some time with your solar plant.
1/2
Specific issues are not easily visible to the naked eye during the initial few years, while repowering resolve solar energy deficits that might be occurring due to this. Even though a plant is not visible to worn out, you can still replace it with a newer plant.
How can I Repower? When you install new solar PV modules with a high-performance class, you also purchase new inverters because only new ones can work efficiently with the significantly higher voltage of the new modules. For off-grid panels, it is better to replace old batteries with new ones that will help in preventing any loss of energy in storage and creating a higher holding capacity., For bulky parts of the solar plant that will function at an acceptable standard, it will delete only the specific not performing entities of the complete construction to save money, avoid unnecessary waste, and allow for a quicker process. Generally, an old thin-film module is about 50 to 100 watts, while the capacity of a modern module is about 300 to 400 watts. It is possible to expand the installed capacity on the existing area by more than 50%. Suppose you plan for your commercial solar power plant to be repowered or not. In that case, it is best to contact our experts, which have their niche in repowering and ask them to assess the operational aspects. Kindly start the process quickly, or you may be losing out on solar energy and facing unseen damage without realizing it. You can gain advice in the profitability analysis from us with the best offers.
2/2