RuggedInside™ RS900M OEM Module Utility Grade Embedded Ethernet Module for OEMs
Features and Benefits General Features
Powerful Marvell 886097F switch fabric Wire-speed, non-blocking, store and forward switching 2 Gigabit Ethernet interfaces (Copper or Fiber) 8 10/100 Ethernet interfaces (Copper or Fiber) Full ROS® feature set Coldfire 5272 management CPU Engine (66Mhz, 16MB RAM) Compact design and small footprint (3”x4”) Low power consumption - 3.3VDC operation User management interface via Ethernet and RS232
Environmental
The RS900M OEM module is designed to enable original equipment manufacturers (OEMs) to embed utility grade Ethernet network communications within their “smart” devices found within electric power, intelligent transportation system and industrial automation applications. The RS900M OEM module provides a flexible, embedded network connectivity solution that fully supports operations within a secure, highly reliable, mission critical, real-time environment. The RS900M contains the full featured Rugged Operating System (ROS®) that is found on all RuggedCom Ethernet switches. Key features include the Enhanced Rapid Spanning Tree Protocol (eRSTP™) that provides the industry’s fastest network fault recovery, advanced networking features such as VLANs, QOS, SNMP, and many cyber security functions that can be used to create a secure network. The RS900M enables OEMs to embed mature switching technology quickly and cost effectively. The RS900M is designed specifically for harsh environments and supports applications that require IEC 61850-3, IEEE 1613 Class 2 and NEMA TS-2 certifications. The RS900M module is backed by RuggedCom’s no-nonsense 5-year warranty and facilities are provided for easy firmware upgrades.
-40ºC to +85ºC operating temperature Relative humidity: 5% to 95% (non-condensing) Altitude: 12,000 ft (3657.6 m)
Rugged Operating System (ROS®) Features
Simple plug and play operation - automatic learning, negotiation, and crossover detection RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5ms) Quality of Service (802.1p) for real-time traffic VLAN (802.1q) with double tagging and GVRP support Link aggregation (802.3ad) IGMP Snooping for multicast filtering Port Rate Limiting and Broadcast Storm Limiting Port configuration, status, statistics, mirroring, security Loss of link management on fiber ports SNTP time synchronization (client and server) Industrial automation features (eg. Modbus)
Cyber Security Features
Multi-level user passwords SSH/SSL encryption Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security
Management Tools
Web-based, Telnet, CLI management interfaces SNMP v1/v2/v3 Remote Monitoring (RMON) Rich set of diagnostics with logging and alarms
RUGGEDCOM
ISO 9001 REGISTERED
www.RuggedCom.com
RUGGEDCOM
ISO 14001
RuggedInside™ OEM Module
REGISTERED
1
RuggedInside™ RS900M OEM Module Utility Grade Embedded Ethernet Module for OEMs
ROS® Features SNTP (Simple Network Time Protocol)
SNTP automatically synchronizes the internal clock of all ROS ® devices on the network. This allows for correlation of time stamped events for troubleshooting.
SCADA and Industrial Automation
Port Configuration and Status
ROS® allows individual ports to be ‘hard’ configured for speed, duplex, auto-negotiation, flow control and more. This allows proper connection with devices that do not negotiate or have unusual settings. Detailed status of ports with alarm and SNMP trap on link problems aid greatly in system troubleshooting.
ROS® contains features that optimize network performance and simplify switch management based on the unique requirements found in SCADA and industrial automation applications. Features such as Modbus TCP management for retrieval of switch data using the ubiquitous Modbus protocol and DHCP Option 82, a Rockwell Automation ODVA requirement for IP address assignment based on the location of the end device, provide capabilities not found in typical “commercial” or “office grade” Ethernet switches.
ROS® provides continuously updating statistics per port that provide both ingress and egress packet and byte counters as well as detailed error figures. Also provided is full support for the RMON statistics, history, alarms, and event groups. RMON allows for very sophisticated data collection, analysis and detection of traffic patterns.
Port Based Network Access Control (802.1x)
Event Logging and Alarms
ROS ® supports the IEEE 802.1x standard that defines a mechanism for port-based network access control which provides a means of authenticating and authorizing devices attached to LAN ports.
Port Rate Limiting
ROS® supports configurable rate limiting per port to limit unicast and multicast traffic. This can be essential to managing precious network bandwidth for service providers.It also provides edge security for denial of service (DoS) attacks.
Port Statistics and RMON (Remote Monitoring)
ROS ® records all significant events to a non-volatile system log allowing forensic troubleshooting. Events include link failure and recovery, unauthorized access, broadcast storm detection, and self-test diagnostics among others. Alarms provide a snapshot of recent events that have yet to be acknowledged by the network administrator. An external hardware relay is de-energized during the presence of critical alarms allowing an external controller to react if desired.
HTML Web Browser and Telnet User Interfaces
Broadcast storms wreak havoc on a network and can cause attached devices to malfunction. This could be disastrous on a network with mission critical equipment. ROS ® limits this by filtering broadcast frames with a user-defined threshold.
ROS ® provides a simple, intuitive user interface for configuration and monitoring via a standard graphical web browser or via Telnet. All system parameters include detailed on-line help to make setup a breeze. ROS ®, presents a common look and feel and standardized configuration process allowing easy migration to other RuggedCom managed products.
Loss of Link Management
Configuration via ASCII Text File
Some intelligent electronic devices (IEDs) have dual fiber optic ports with automatic failover to a backup port should the primary fail. ROS ® ensures this mechanism works reliably under all failure modes by appropriately disabling link signals when required. ROS ® also flushes learned MAC addresses to ensure the failover occurs quickly.
All configuration parameters are stored in an ASCII formatted text file that can easily be transferred via TFTP or Xmodem. The configuration file can be saved for backup purposes and easily manipulated by a text editor. The same text file can be downloaded to the switch at a later date in order to re-configure or restore a previous configuration.
Port Mirroring
Command Line Interface (CLI)
Broadcast Storm Filtering
ROS can be configured to duplicate all traffic on one port to a designated mirror port. When combined with a network analyzer, this can be a powerful troubleshooting tool. ®
www.RuggedCom.com
A command line interface can be used in conjunction with remote shell to automate data retrieval, configuration updates, and firmware upgrades. A powerful SQL-like capability allows expert users the ability to selectively retrieve or manipulate any parameters the device has to offer.
RuggedInside™ OEM Module
2
RuggedInside™ RS900M OEM Module Utility Grade Embedded Ethernet Module for OEMs
Module Block Diagram
Module Dimensions
www.RuggedCom.com
RuggedInside™ OEM Module
3
RuggedInside™ RS900M OEM Module Utility Grade Embedded Ethernet Module for OEMs
RS900M Evaluation Kit Available as an optional accessory, the RS900M Evaluation Kit provides a platform for testing and developing OEM products applications with the RS900M. With this, developers can work with the RS900M in a stable and predictable environment, and explore the Module’s many capacities. The evaluation board features the following connections and indicators: Ports 1 to 6 RJ45: Fast Ethernet Ports 7 and 8 LC Fiber: Fast Ethernet Ports 9 and 10 RJ45: Gigabit Ethernet Ports 9 and 10 SFP: Gigabit Ethernet RS232 Console Port Fail Safe Relay Connector DC Input Connector: 10VDC to 30VDC RS900M Module Connector Power LED Alarm LED Manual Reset Button
Included in the RS900M Evaluation Kit are the following: Evaluation PCBA (Quantity: 1) 12VDC Power Supply (Quantity: 1) North American Power Supply Cord (Nema 5-15P) (Quantity: 1) European Power Supply Cord (CEE 7/VII) (Quantity: 1) #6-32 Å~ 3/4” M/F Standoffs (Quantity: 8) #6-32 Å~ 1/4” Screws (Quantity: 8) M3 x 5mm Screws (Quantity: 4)
www.RuggedCom.com
RuggedInside™ OEM Module
4
RuggedInside™ RS900M OEM Module REV A01
Utility Grade Embedded Ethernet Module for OEMs
Initial Re
Evaluation Board 7.500 7.000 0.250
3.250
0.150 (8X)
1
Port 1
Port 2
6.500
7.000
Port 3
RS900M Module Connector
DC INPUT 10V-30V
Fail Safe Relay
Manual Reset Button
RS232 Console
3.150
Port 4
Port 5
Port 6
Port 10 SFP
Port 9 SFP
Port 8
Port 9 Copper
Port 10 Copper
ALARM LED
0.250
PWR LED
Port 7
TOP VIEW
SIDE VIEW
DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE: .xx = ± .01 .xxx = ± .005 ANGLES = ± 2˚ SIGNATURES
m Stack Height Plug
PECIFIED
www.RuggedCom.com
DATE
DESIGNER T.D.
Oct 21, 2011
DRAWN T.D.
Oct 21, 2011
CHECKED A.A.
Oct 21, 2011
APPROVED A.A.
Oct 21, 2011
RuggedInside™ OEM Module
5
RuggedInside™ RS900M OEM Module Utility Grade Embedded Ethernet Module for OEMs
Order Codes RS900M - STND_______ MOD MOD: Manufacturing Modifications
XX = None C01 = Conformal Coating
RS900M Evaluation Board Part Number: 99-64-0001-001
RuggedCom Inc. 300 Applewood Crescent Concord, Ontario, Canada L4K 5C7 Tel: +1 (905) 856-5288 Fax: +1 (905) 856-1995 Toll Free: 1 (888) 264-0006 Technical Support Center: 1 (866) 922-7975 © 2011 RuggedCom Inc. RuggedSwitch is a registered trademark of RuggedCom Inc. Ethernet is a trademark of the Xerox Corporation. Patent Pending All specifications in this document are subject to change without notice. Rev 1d – 05/24/12
www.RuggedCom.com
For additional information on our products and services, please visit our web site at: www.RuggedCom.com
RuggedInside™ OEM Module
6