INSULATED TOOLS
503
INSULATED TOOLS
Insulated Tools
Your safety is our highest priority! Bahco has been designing and manufacturing professional tools for over 120 years. Our core value is product performance, and the tools which perform the best are also usually the safest tools. Bahco tools are sold worldwide, but they are always backed up with local expertise. With a range of more than 200 insulated tools, Bahco offers one of the widest and most comprehensive assortments of insulated tools on the market. All Bahco insulated tools are manufactured according to International IEC60900 standards for working with live systems up to 1000VAC & 1500VDC. They follow strict quality controls and are submitted to the most stringent tests. Bahco insulated tools comply with VDE0820 Standards and 63% of the assortment is certified by the German VDE laboratory. The new Bahco 1000V assortment is designed to get the job done quickly and safely.
Quality guarantee Bahco tools are engineered to achieve a high level of technical performance. The materials used are high quality and they have been carefully chosen and tested in order to provide safety and durability. Bahco is one of the few hand-tool manufacturers that make the tools and the insulation in-house. Both the PVC dipped insulated version (most of the tools) and the handle version (pliers and screwdrivers) are manufactured entirely in Bahco factories. Each tool is tested to 10,000 V for a period of 10 seconds to provide a high level of protection during live work.
504
INSULATED TOOLS
Routine tests in accordance with IEC60900 specification Dielectric test The tools shall be immersed in water for 24 hours. A voltage of 10 kV shall then be continuously applied for 3 min. The test shall be considered successful if no electrical puncture, spark over or flashover occurs during the test period, and if the limits of leakage current are not exceeded.
Impact test The tool is cooled at -25째 C for two hours. Afterwards, a special hammer applies force on the insulating layer. The test shall be considered successful if the insulating material shows no breaks.
Insulation adhesion test The tools shall be conditioned at a temperature of 70째 C for 168 h. A force of 50 N shall be applied in the direction of the line dividing the insulating material coating from the conductive part for 3 min. The insulation material must during this test stay firmly attached to the basic tool.
Flame test The test shall be considered as passed if the flame height on the tool does not exceed 120 mm and there is no leakage of insulated material in fusion.
Retaining force test This test is applied only to tools capable of being assembled. Consists on applying a force of 50 N to try to separate both tools. After a minute, both tools had to stay assembled.
Permanent marking durability The markings shall be rubbed for 15 s with a rag soaked in water, and then for 15 s with a rag soaked in isopropanol. After this rubbing, the marking shall still be legible
Penetration test The insulating surface is pressed with a special device. A voltage of 5000 V is then applied to the tool for 3 minutes. The test shall be considered successful if no electrical puncture, spark-over or flashover occurs during the test period.
Visual and dimensional The tool (in particular the insulation) shall be visually checked and shall be free from external defects. The marking has to be perfectly legible and the dimensions should be inaccordance with the standard. * 63% of Bahco insulated tools are Certified by the German VDE laboratory
505
INSULATED TOOLS SETS
1000V 11 PIECE 1/2" DRIVE SOCKET AND DRIVE TOOL SET Product Code 7811DMV
Description 1000V 11 Piece 1/2" Drive Socket and Drive Tool Set
Contents Include: 1/2" Drive Tools Product Code 8150-1/2V 8154-1/2V 8160-1/2V 813VDE-5.5-125
Description 1000V Ratchet 1000V T-Handle 1000V Extension Screwdriver VDE Slotted
1/2" Drive Sockets Product Code 7800DMV-10 7800DMV-11 7800DMV-13 7800DMV-17 7800DMV-19 7800DMV-20 7800DMV-22
Size (mm) 10 11 13 17 19 20 22
Features UÊ For work on electrical installations. UÊ Includes shock resistant plastic case
7811DMV
1000V 10 PIECE TOOL SET Product Code 3045V-1
Description 1000V 10 Piece Tool Set
Contents Include: 1000V Tools Product Code 2171V-160 2678V-180 2223V-150 BE-8220S BE-8040S BE-8050S BE-8610S BE-8620S 2820VP SC127V
Description Side Cutting Pliers Combination Pliers Wire Stripping Pliers 9" Slotted ergo® Screwdriver, 1⁄2 Tip 8 3⁄4" Slotted ergo® Screwdriver, 5⁄32 Tip 8 3⁄4" Slotted ergo® Screwdriver, 7⁄32 Tip 8" Phillips ergo® Screwdriver, PH 1 8 3⁄4" Phillips ergo® Screwdriver, PH 2 Knife with Straight Blade Electrician Scissors
Features UÊ For work on electrical installations UÊ A compact resistant case with basic assortment of 1000V tools
3045V-1
506
INSULATED TOOLS SETS
1000V 19 PIECE TOOL SET Product Code 3045V-2
Description 1000V 19 Piece Tool Set
Contents Include: 1000V Tools Product Code Description 2171V-160 Side Cutting Pliers 2678V-180 Combination Pliers 2430V-160 Snip Nose Pliers 2223V-150 Wire Stripping Pliers BE-8220S 9" Slotted ergo® Screwdriver,1/2 Tip BE-8040S 8 3⁄4" Slotted ergo® Screwdriver, 5/32 Tip BE-8050S 8 3⁄4" Slotted ergo® Screwdriver, 7/32 Tip BE-8255S 10 3⁄4" Slotted ergo® Screwdriver, 1/4 Tip BE-8610S 8" Phillips ergo® Screwdriver, PH 1 BE-8620S 8 3⁄4" Phillips ergo® Screwdriver, PH 2 2820VP Knife with Straight Blade SC150NGV Electrician Scissors
1000V Open End Wrenches Product Code Size (mm) 6MV-10 10 6MV-11 11 6MV-12 12 6MV-13 13 6MV-14 14 6MV-17 17 6MV-18 18 6MV-19 19
Features 3045V-2
UÊ For work on electrical installations UÊ A compact resistant case with basic assortment of 1000V tools
1000V 8 PIECE OPEN END WRENCH SET, METRIC Product Code 6MV/8T
Description 1000V 8 Piece Open End Wrench Set, Metric
Contents Include: 1000V Tools Product Code 6MV-10 6MV-11 6MV-12 6MV-13 6MV-14 6MV-17 6MV-18 6MV-19
Size (mm) 10 11 12 13 14 17 18 19
Features 6MV/8T
UÊ For work on electrical installations UÊ Supplied in a plastic roll pouch
507
INSULATED TOOLS SCREWDRIVERS
1000V ERGO® SLOTTED SCREWDRIVERS Three Component Handle with Black Oxide Tips Product Code BE-8010S BE-8220S BE-8040S BE-8050S BE-8230S BE-8255S BE-8065S
Overall Length (Inches) 7 9 8 3/4 8 3/4 9 3/4 10 3/4 11 5/8
Blade Length (Inches) 3 4 4 4 5 6 7
Tip Width (Inches) 3/32 1 /8 5/32 7/32 9/64 1 /4 5/16
Features UÊ The three component ergonomically designed handle provides comfort and maximum grip even with oily hands. UÊ Color coded handles indicates tip type and show tip type symbol on bottom of handle for quick identification. UÊ Black oxide tips prevent chipping of chrome to reduce possible contamination at work location.
BE-8255S
1000V ERGO® PHILLIPS® SCREWDRIVERS Three Component Handle with Black Oxide Tips Product Code BE-8600S BE-8610S BE-8620S BE-8630S BE-8640S **
Overall Length (Inches) 6 3 /8 8 8 3 /4 10 3/4 14 1/4
Blade Length (Inches) 2 3 /8 3 5/32 4 6 8
Point Size 0 1 2 3 4
** Dual grip handle for two-handed operation provides extra torque when necessary
Features UÊ The three component ergonomically designed handle provides comfort and maximum grip even with oily hands. UÊ Color coded handles indicates tip type and show tip type symbol on bottom of handle for quick identification. UÊ Black oxide tips prevent chipping of chrome to reduce possible contamination at work location.
BE-8620S BE-8640S
508
INSULATED TOOLS SCREWDRIVER SET/ NUTDRIVERS
5 PIECE ERGO® 1000V SCREWDRIVER SET Three Component Handle with Black Oxide Tips Product Code
Description
BE-9881S 5 Piece ergo® Screwdriver Set Phillips® / Slotted Contents Include: Product Code BE-8220S BE-8040S BE-8050S BE-8610S BE-8620S
Overall Length (Inches) 9 8 3 /4 8 3 /4 8 8 3 /4
Blade Length (Inches) 4 4 4 3 5/32 4
Tip Width / Point Size 1 /8 5/32 7/32 #1 #2
Features
BE-9881S
UÊ Contains 3 slotted and 2 Phillips® screwdrivers. UÊ For work on live equipment up to 1000 volts. UÊ The three component ergonomically designed handle provides comfort and maximum grip even with oily hands. UÊ Color coded handles indicates tip type and show tip type symbol on bottom of handle for quick identification. UÊ Chrome blades prevent corrosion and can be easily cleaned. UÊ Black oxide tips prevent chipping of chrome to reduce possible contamination at work location.
1000V NUT DRIVERS Product Code 817V-6 817V-7 817V-8 817V-10 817V-13
mm 6 7 8 10 13
Length (Inches) 8 3⁄4 8 3⁄4 8 3⁄4 8 3⁄4 8 3⁄4
Features UÊ Insulated nutdriver for work on live equipment up to 1000 volts UÊ Hexagon opening tolerance DIN ISO 691, ISO 691
817V
509
INSULATED TOOLS PLIERS
1000V HIGH LEVERAGE LINESMAN’S PLIER Product Code 2653V-9
Length 9 1⁄2
Jaw Length (Inches) 1 9⁄16
Maximum Cutting Capacity (Inches) 3 ⁄32 Hard Steel
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Joint placement increases leverage to reduce the cutting force needed. UÊ Saw toothed serrations provide a solid grip on application material.
2653V-9
1000V HEAVY DUTY LONG NOSE PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2533V-7 2533V-8
Length 7 1⁄2 8 1⁄4
Jaw Length (Inches) 2 7⁄16 2 3⁄8
Maximum Cutting Capacity (Inches) 1 ⁄16 Hard Steel 5 ⁄64 Hard Steel
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Saw-toothed shaped, serrated jaws provide maximum gripping surface. UÊ High performance tool steel construction adds extra strength.
2533V-7
510
INSULATED TOOLS PLIERS
1000V HEAVY DUTY STRAIGHT HEAD DIAGONAL CUTTING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2203V-5 2203V-8
Length 5 1⁄4 8 3⁄16
Jaw Length (Inches) 9 ⁄16 13 ⁄16
Maximum Cutting Capacity (Inches) 1 ⁄16 Piano Wire 3 ⁄32 Piano Wire
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ High frequency hardened cutting edges hold their precision sharpened cutting surfaces.
2203V-8
1000V HEAVY DUTY ANGLED HEAD DIAGONAL CUTTING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2213V-8
Length 8 1⁄16
Jaw Length (Inches) 13 ⁄16
Maximum Cutting Capacity (Inches) 3 ⁄32 Piano Wire
Features
2213V-8
UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ High leverage joint placement to reduce the cutting force. Unique screw joint design ensures a smooth joint action. UÊ The 14 degree angled head enables better accessibility in working situations and leaves free space for your hand.
511
INSULATED TOOLS PLIERS
1000V COMBINATION PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2678V-180
Length (inches) 7
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Cuts from 1.0 mm soft wire to 1.6 mm hard wire UÊ Chrome plated finish ISO: 5746 DIN: 5746
2678V-180
1000V WIRE STRIPPING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2223V-160
Length (inches) 6 1⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Maximum cable diameter 5 mm; Maximum cable section 10 mm 2 UÊ Chrome plated finish
2223V-160
1000V ROUND NOSE PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2521V-160
Length (inches) 6 1⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Suited for wire-bending work UÊ Chrome plated finish ISO: 5745 DIN: 5745
512
2521V-160
INSULATED TOOLS PLIERS
1000V SNIPE NOSE PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2430V-160 2430V-200
Length (inches) 6 1⁄4 8
Jaw Length (inches) 1 7⁄8 2 7⁄8
Features 2430V-160
UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire UÊ Chrome plated finish ISO: 5745 DIN: 5745
1000V SNIPE NOSE PLIERS BENT TIP 60° For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2427V-200 2427V-200
Length (inches) 8
Jaw Length (inches) 2 3⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Tips angled at 60°° UÊ Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire UÊ Chrome plated finish ISO: 5745 DIN: 5745
1000V FLAT NOSE PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2421V-160
Length (inches) 6 1⁄4
Jaw Length (inches) 1 7⁄8
Features 2421V-160
UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Good grip and improved accessibility in confined spaces UÊ Chrome plated finish ISO: 5745 DIN: 5745
513
INSULATED TOOLS PLIERS
1000V END CUTTING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 527V-160 527V-200
Length (inches) 6 1⁄4 8
Jaw Length (inches) 1 ⁄4 1 ⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Cuts from 1.0 mm soft wire to 1.6 mm hard wire UÊ Chrome plated finish ISO: 5748 DIN: 5748
527V-160
1000V SIDE CUTTING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2171V-160 2171V-180
Length (inches) 6 1⁄4 7
Jaw Length (inches) 3 ⁄4 3 ⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Cuts from 0.5 mm soft wire to 1.6 mm hard wire UÊ Chrome plated finish ISO: 5749, DIN: 5749
2171V-180
1000V HEAVY DUTY SIDE CUTTING PLIERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2191V-200
Length (inches) 8
Jaw Length (inches) 3 ⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Cuts piano wire UÊ Chrome plated finish ISO: 5749, DIN: 5749
514
2191V-200
INSULATED TOOLS PLIERS
1000V SIDE CUTTING COMBINATION PLIERS With Insulated Grips Product Code 2628S-180 2628S-200
Overall Length (Inches) 7 8
Jaw Length (Inches) 1 7/16 1 1/2
Maximum Cutting Capacity (Inches) 5/64 Hard Steel 7 /64 Hard Steel
Features
2628S
UÊ Extra thick grip handles with thumb stops, provides protection up to 1000 volts. UÊ High-leverage joint placement to reduce the cutting force. Joint design ensures a smooth joint action. UÊ Heavy-duty design - high performance tool steel construction adds extra strength.
1000V DIAGONAL CUTTING PLIERS With Insulated Grips Product Code 2101S-140 2101S-160 2101S-180 2101S-200 2101S
Overall Length (Inches) 5 1 /2 6 1 /4 7 8
Jaw Length (Inches) 5/8 3/4 13/16 7 /8
Maximum Cutting Capacity (Inches) 1/16 Piano Wire 1/16 Piano Wire 5/64 Piano Wire 3 /32 Piano Wire
Features UÊ Extra thick grip handles with thumb stops, provides protection up to 1000 volts. UÊ Edges near the joint are shaped for cutting hard materials such as thick single wires. UÊ Towards the tip they are adapted for soft materials and for stripping wires of thinner dimensions. UÊ Jaws are made from specially hardened steel so they stay sharp longer.
1000V NOSE PLIERS With Insulated Grips 2430S
Product Code 2430S-200 2427S-200
Style straight curved
Overall Length (Inches) 8 8
Maximum Cutting Capacity (Inches) 1/16 Hard Steel 5/64 Hard Steel
Features UÊ High performance tool steel construction adds extra strength. UÊ Extra thick grip handles with thumb stops, provides protection up to 1000 volts.
2427S
515
INSULATED TOOLS CABLE & BOLT CUTTERS
1000V CABLE CUTTER With Insulated Grips Product Code 2520S
Overall Length (Inches) 23 5/8
Cable Cutting Capacity (Inches) / Description 1 3/16 Aluminum/Copper without Messenger Wire
Replacement Blade Kit 2520-SH
Features UÊ For cuts on ferrous material, only use cutting notch that is provided below top cutting blades in jaws. UÊ Extra thick grip handles on insulated cutter provides protection up to 1000 volts.
2520S
1000V RATCHET ACTION CABLE CUTTER For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2806-35V 2806-52V
Length (inches) 9 13
Cutting Capacity (Inches) 1 1⁄2 2
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ One hand operation, easy release of the movable jaw UÊ For cutting copper and aluminum cables UÊ Not suitable for hard copper, steel cables, or internal steel wire cables UÊ Clean and smooth cut without distortion
2806-35V
1000V BOLT CUTTER For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820VBC
Length (inches) 25
Wire types Ø mm w 80kg/mm2 120kg/mm2 160kg/mm2 9 8 7
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Forged head; Induction hardened cutting edges UÊ Long arms with lever-action head, allows cutting of hard wires with very little effort.
516
2820VBC
INSULATED TOOLS WRENCHES
1000V OFFSET BOX END WRENCH - SAE For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2ZV-5/16 2ZV-3/8 2ZV-7/16 2ZV-1/2 2ZV-9/16 2ZV-5/8 2ZV-3/4 2ZV-11/16 2ZV-13/16 2ZV-7/8 2ZV-15/16 2ZV-1 2ZV-1.1/16
Size (Inches) Overall Length (Inches) 5 ⁄16 6 3 ⁄8 6 1⁄4 7 ⁄16 7 1 ⁄2 7 1⁄2 9 ⁄16 7 3⁄4 5 ⁄8 7 7⁄8 11 ⁄16 8 3 ⁄4 8 3⁄4 13 ⁄16 9 1⁄4 7/8 9 2⁄3 15 ⁄16 10 1⁄2 1 10 3⁄4 1 1⁄16 11
Open End Width (Inches) 1 ⁄2 5 ⁄8 3 ⁄4 3 ⁄4 1 1 1 1 1⁄8 1 1⁄4 1 1⁄4 1 3⁄8 1 1⁄2 11⁄2
Open End Thickness (Inches) 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2
Features 2ZV-5/8
UÊ 2 layer coating insulation with different colors plus a 3rd one in black to further protect handle edges on spanners from 6 mm to16 mm. Red: safety. Yellow: danger UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges on spanners from 17 mmto 32 mm. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel Opening tolerance according to ISO 691
1000V OFFSET BOX END WRENCH - METRIC For protection against inadvertent shock when working on circuits up to 1000V.
2MV16
Product Code 2MV6 2MV7 2MV8 2MV9 2MV10 2MV11 2MV12 2MV13 2MV14 2MV15 2MV16 2MV17 2MV18 2MV19 2MV21 2MV22 2MV23 2MV24
Size (mm) 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 23 24
Overall Length (Inches) Box End Diameter (Inches) 3 5 1⁄2 ⁄8 1 5 3⁄4 ⁄2 1 6 ⁄2 5 6 ⁄8 5 1 6 ⁄4 ⁄8 3 6 3⁄4 ⁄4 3 7 ⁄4 3 7 ⁄4 3 1 7 ⁄2 ⁄4 3 7 ⁄4 1 7 7⁄8 1 8 1 8 1⁄ 2 1 8 3⁄4 1 1⁄8 1 9 ⁄4 1 1⁄4 9 2⁄3 1 1⁄4 10 1 3⁄8 10 1⁄2 1 3⁄8
Box End Thickness (Inches) 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2
Features
UÊ 2 layer coating insulation with different colors plus a 3rd one in black to further protect handle edges on spanners from 6 mm to 16 mm. Red: safety. Yellow: danger UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges on spanners from 17 mm to 32 mm. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel Opening tolerance according to ISO 691
1000V CROSS WRENCH For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820V13 2820V17
Length (mm) 210 210
Opening (mm) 7x9x11x13 8x10x13x17
Features
UÊ 2 layer coating insulation with different colors Red: safety. Yellow: danger UÊ Material: Chrome-Vanadium steel UÊ 6 point openings with standard profile Opening tolerance according to ISO 691
2820V13
517
INSULATED TOOLS WRENCHES
1000V OPEN END WRENCH - SAE For protection against inadvertent shock when working on circuits up to 1000V Product Code 6ZV-5/16 6ZV-3/8 6ZV-7/16 6ZV-1/2 6ZV-9/16 6ZV-5/8 6ZV-11/16 6ZV-3/4 6ZV-13/16 6ZV-7/8 6ZV-15/16 6ZV-1 6ZV-1.1/16 6ZV-1.1/8 6ZV-1.3/16 6ZV-1.1/4
Size (Inches) 5 ⁄16 3 ⁄8 7 ⁄16 1 ⁄2 9 ⁄16 5 ⁄8 11 ⁄16 3 ⁄4 13 ⁄16 7 ⁄8 15 ⁄16 1 1 1⁄16 1 1⁄ 8 1 3⁄16 1 1⁄4
Overall Length (Inches) 3 5⁄8 4 1⁄4 4 9⁄16 5 1⁄2 6 6 3⁄16 6 3⁄8 7 7 1⁄4 7 5⁄8 8 1⁄4 8 3⁄8 8 7⁄8 9 1⁄4 9 7⁄16 9 13⁄16
Open End Width (Inches) 11 ⁄16 15 ⁄16 1 1 1⁄4 1 1⁄4 1 1⁄4 1 7⁄16 1 11⁄16 1 13⁄16 1 7⁄8 2 2 1⁄8 2 1⁄4 2 3⁄8 2 1⁄2 2 11⁄16
Open End Thickness (Inches) 3 ⁄16 3 ⁄16 3 ⁄16 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄8 0.38 3 ⁄8 3 ⁄8
Layers Coating 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3
6ZV-1
Features UÊ 2 layer coating insulation with different colors plus a 3rd one in black to further protect handle edges on spanners from 5⁄16" to 5⁄8". Red: safety. Yellow: danger UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges on spanners from 11⁄16" to 11⁄4". Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel Opening tolerance according to ISO 691
1000V OPEN END WRENCH - METRIC For protection against inadvertent shock when working on circuits up to 1000V Product Code 6MV6 6MV7 6MV8 6MV9 6MV10 6MV11 6MV12 6MV13 6MV14 6MV15 6MV16 6MV17 6MV18 6MV19 6MV20 6MV21 6MV22 6MV23 6MV24 6MV27 6MV30 6MV32
Size (mm) 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27 30 32
Overall Length (Inches) 3 5⁄8 3 5⁄8 3 5⁄8 3 7⁄8 4 1⁄4 4 9⁄16 5 5 5⁄16 5 1⁄2 6 6 3⁄16 6 3⁄8 6 2 ⁄3 6 7⁄8 7 7 1⁄4 7 5⁄8 8 8 1⁄4 8 7⁄8 9 7⁄16 9 13⁄16
Open End Width (Inches) 9 ⁄16 11 ⁄16 11 ⁄16 13 ⁄16 15 ⁄16 1 1 1⁄8 1 1⁄4 1 1⁄4 1 1⁄4 1 1⁄4 1 7⁄16 1 9⁄16 1 5⁄8 1 11⁄16 1 13⁄16 1 7⁄8 1 7⁄8 2 2 5⁄16 2 1⁄2 2 11⁄16
Open End Thickness (Inches) 1 ⁄8 1 ⁄8 3 ⁄16 3 ⁄16 3 ⁄16 3 ⁄16 3 ⁄16 3 ⁄16 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄8 3 ⁄8 3 ⁄8
Layers Coating 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3
Features UÊ 2 layer coating insulation with different colors plus a 3rd one in black to further protect handle edges on spanners from 6 mm to 16 mm. Red: safety. Yellow: danger UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges on spanners from 17 mm to 32 mm. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel Opening tolerance according to ISO 691
518
6MV-27
INSULATED TOOLS ADJUSTABLE WRENCHES
1000V ADJUSTABLE WRENCHES For protection against inadvertent shock when working on circuits up to 1000V. Product Code 8070V 8071V 8072V 8073V 8074V 8071V
Length (inches) 6 8 10 12 15
Max Jaw Opening 3 ⁄4 1 1⁄16 1 3⁄16 1 5⁄16 1 3⁄4
Head Thickness 7 ⁄16 1 ⁄2 5 ⁄8 3 ⁄4 15 ⁄16
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: Caution. Yellow: danger UÊ Material: Chrome-Vanadium steel UÊ The moveable jaw slides easily by smoothly operating the thumb screw Complies with ISO and ANSI torque requirements. Head dimensions comply with ISO 6787 standards
1000V ADJUSTABLE WRENCHES FULLY INSULATED For protection against inadvertent shock when working on circuits up to 1000V. Product Code 8071VLT 8072VLT 8073VLT
Length (inches) 8 10 12
Max Jaw Opening 1 1⁄4 1 3⁄8 1 1⁄2
Head Thickness 3 ⁄4 1 1 1⁄4
Features
8071VLT
UÊ 3 layer coating insulation on the complete wrench with different colors plus a 4th one in black to further protect handle edges. Red: safety Orange: Caution. Yellow: danger UÊ Chrome-Vanadium steel UÊ The moveable jaw slides easily by smoothly operating the side screw Exceed ISO and ANSI torque requirements
519
INSULATED TOOLS HEX KEYS/SOCKET WRENCHES
1000V HEX KEY For protection against inadvertent shock when working on circuits up to 1000V Product Code 1999MV-3 1999MV-4 1999MV-5 1999MV-6 1999MV-7 1999MV-8 1999MV-9 1999MV-10 1999MV-12
Size (MM) 3 4 5 6 7 8 9 10 12
Overall Length (Inches) 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4 4 3⁄4
Non-Insulated Tip Length (Inches) 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2
Key Length (Inches) 3 3 3 3 3⁄8 3 5⁄8 4 4 4 1⁄2 5
Features
1999MV-3
UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel Hex dimensions and torque requirements comply with those given in ISO standards
1000V T-HANDLE SOCKET WRENCH For protection against inadvertent shock when working on circuits up to 1000V Product Code 28MV8 28MV9 28MV10 28MV11 28MV12 28MV13 28MV14 28MV15 28MV16 28MV17 28MV18 28MV19 28MV20 28MV21 28MV22
Size Overall Length Broach Depth Bolt Clearance Working End Diameter (MM) (inches) (Inches) (Inches) (Inches) 5 5 8 7 3⁄4 ⁄16 1 1⁄4 ⁄8 5 11 ⁄16 1 1⁄4 ⁄16 9 7 3⁄4 5 3 ⁄16 1 1⁄4 ⁄4 10 7 3⁄4 3 13 ⁄8 1 1⁄2 ⁄16 11 7 3⁄4 3 7 ⁄8 1 3⁄4 ⁄8 12 7 3⁄4 1 7 13 7 3⁄4 ⁄2 1 3⁄4 ⁄8 3 3 1 14 7 ⁄4 ⁄2 1 ⁄4 1 3 3 1 15 7 ⁄4 ⁄2 1 ⁄4 1 1 16 7 3⁄4 ⁄2 2 1 1⁄8 1 3 17 7 ⁄4 ⁄2 2 1 1⁄8 1 18 7 3⁄4 ⁄2 2 1⁄4 1 1⁄8 11 19 7 3⁄4 ⁄16 2 1⁄4 1 1⁄4 25 20 7 3⁄4 ⁄32 2 1⁄2 1 1⁄4 25 21 7 3⁄4 ⁄32 2 1⁄2 1 1⁄4 25 22 7 3⁄4 ⁄32 2 1⁄2 1 3⁄8
Handle Length (Inches) 5 5 5 5 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2 5 1⁄2
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel UÊ 6 point Dynamic-Drive Profile Opening tolerance according to ISO 691
520
1999MV-3
INSULATED TOOLS 3/8" DRIVE RATCHET & SOCKETS
1000V 3/8" RATCHET For protection against inadvertent shock when working on circuits up to 1000V. Product Code 6520800
Overall Length (Inches) 8 1⁄4
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel
6520800
1000V 3/8" DRIVE SOCKET - SAE For protection against inadvertent shock when working on circuits up to 1000V. Product Code 7400DMV-10 7400DMV-11 7400DMV-12 7400DMV-13 7400DMV-14 7400DMV-17 7400DMN-19
Size (mm) 10 11 12 13 14 17 19
Overall Length (Inches) 1-1⁄2 1-1⁄2 1-1⁄2 1-1⁄2 1-1⁄2 1-1⁄2 1-1⁄2
Drive End Diameter (Inches) 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8
Working End Diameter (Inches) 3 ⁄4 3 ⁄4 3 ⁄4 1 1 1 1
Nose Length (Inches) 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8
1000V 3/8" DRIVE SOCKET - METRIC For protection against inadvertent shock when working on circuits up to 1000V. 7400DMV-10
Product Code 7400DZV-3/8 7400DZV-7/16 7400DZV-1/2 7400DZV-9/16 7400DZV-5/8 7400DZV-11/16 7400DZV-3/4
Size Overall Length (Inches) (Inches) 3 ⁄8" 1-1⁄2 7 ⁄16" 1-1⁄2 1 ⁄2" 1-1⁄2 9 ⁄16" 1-1⁄2 5 ⁄8" 1-1⁄2 11 ⁄16" 1-1⁄2 3 ⁄4" 1-1⁄2
Drive End Diameter (Inches) 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8
Working End Diameter (Inches) 3 ⁄4 3 ⁄4 3 ⁄4 1 1 1 1
Nose Length (Inches) 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8
Features UÊ 2 layer coating insulation with different colors. Red: safety. Yellow: danger UÊ Material: Chrome-Vanadium steel UÊ 12 point Dynamic-Drive Profile Both square and 12 point openings according to the tolerance and torque requirements given in ISO standards12 point Dynamic-Drive Profile
521
INSULATED TOOLS 1/2" DRIVE RATCHET & ACCESSORIES
1000V 1/2" RATCHET For protection against inadvertent shock when working on circuits up to 1000V. Product Code 8150-1/2V
Length (inches) 10 1⁄2
A 3
B 2
C ⁄2
1
Features UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Material: Chrome-Vanadium steel UÊ One of the buttons is a lever to change the ratcheting direction; the other is a push button to lock or release the socket to the male square drive UÊ 28 teeth ratchet to operate at a 13° angle Static and endurance tests with 50000 cycles. Complies with the ISO standards.
8150-1/2V
1000V 1/2" T-HANDLE For protection against inadvertent shock when working on circuits up to 1000V. Product Code 8154-1/2V
Length (inches) 8
A 7 1⁄2 8154-1/2V
Features UÊ 2 layer coating insulation with different colors plus a 3rd one in black to further protect handle edges. Red: safety. Yellow: danger UÊ Material: Chrome-Vanadium steel UÊ The male square drive has a slotted screw to move the ball outward or inward and block or unblock the socket to it The male square tolerances and torque requirements comply with the respective ISO standard.
1000V 1/2" EXTENSION For protection against inadvertent shock when working on circuits up to 1000V. Product Code 8160-1/2V 8162-1/2V
Length (inches) 5 10
Features
8160-1/2V
UÊ 2 layer coating insulation with different colors. Red: safety. Yellow: danger UÊ Material: Chrome-Vanadium steel UÊ The male square drive is having a slotted screw to move the ball outward or inward and block or unblock the socket to it The male square tolerances and torque requirements comply with the respective ISO standard.
8162-1/2V
522
INSULATED TOOLS 1/2" DRIVE SOCKETS
1000V 1/2" DRIVE SOCKETS - SAE For protection against inadvertent shock when working on circuits up to 1000V.
7800DZV
Product Code 7800DZV-3/8 7800DZV-7/16 7800DZV-1/2 7800DZV-9/16 7800DZV-5/8 7800DZV-11/16 7800DZV-3/4 7800DZV-13/16 7800DZV-7/8 7800DZV-15/16 7800DZV-1 7800DZV-1.1/16 7800DZV-1.1/8 7800DZV-1.3/16 7800DZV-1.1/4
Size (Inches) 3 ⁄8 7 ⁄16 1 ⁄2 9 ⁄16 5 ⁄8 11 ⁄16 3 ⁄4 13 ⁄16 7 ⁄8 15 ⁄16 1 1 1⁄16 1 1⁄8 1 3⁄16 1 1⁄4
Overall Length (Inches) 2 2 2 2 2 2 2 2 2 2 2 2 1⁄8 2 1⁄8 2 1⁄8 2 1⁄2
Drive End Diamger (Inches) 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8
Features
UÊ 2 layer coating insulation with different colors UÊ Material: Chrome-Vanadium steel UÊ 12 point Dynamic Drive Profile
Working End Diameter (Inches) 3 ⁄4 3 ⁄4 3 ⁄4 1 1 1 1⁄8 1 3⁄16 1 1⁄3 1 1⁄3 1 1⁄2 1 1⁄2 1 5⁄8 1 5⁄8 1 3⁄4 1 7⁄8
Nose Length (Inches) 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 9 ⁄16 5 ⁄8 5 ⁄8 3 ⁄4 3 ⁄4 3 ⁄4 7 ⁄8
Both square and 12 point openings according to the tolerance and torque requirements given in ISO standards.
1000V 1/2" DRIVE SOCKETS - METRIC For protection against inadvertent shock when working on circuits up to 1000V.
7800DMV
Product Code 7800DMV-8 7800DMV-10 7800DMV-11 7800DMV-12 7800DMV-13 7800DMV-14 7800DMV-15 7800DMV-16 7800DMV-17 7800DMV-18 7800DMV-19 7800DMV-20 7800DMV-21 7800DMV-22 7800DMV-24 7800DMV-27 7800DMV-30 7800DMV-32
Size (Inches) 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32
Overall Length (Inches) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1⁄ 8 2 1⁄8 2 1⁄2
Drive End Diamger (Inches) 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8
Working End Diameter (Inches) 2 ⁄3 3 ⁄4 3 ⁄4 3 ⁄4 1 1 1 1 1 1⁄8 1 1⁄8 1 3⁄16 1 1⁄4 1 1⁄3 1 1⁄3 1 1⁄2 1 5⁄8 1 3⁄4 1 7⁄8
Nose Length (Inches) 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 9 ⁄16 5 ⁄8 3 ⁄4 3 ⁄4 7 ⁄8
Features
UÊ 2 layer coating insulation with different colors UÊ Material: Chrome-Vanadium steel UÊ 12 point Dynamic Drive Profile
Both square and 12 point openings according to the tolerance and torque requirements given in ISO standards.
523
INSULATED TOOLS HACKSAW FRAMES
1000V HACKSAW FRAMES - DIPPED INSULATION For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820HSV1
A (inches) 12
B (inches) 3
L (inches) 18
Features UÊ Insulated hacksaw with 3906-300-18 Sandflex® bi-metal blade UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Supplied with the reliable and shatterproof Sandflex® bi-metal blade 18TPI with excellent cutting performance and wear resistance UÊ Blade length: 12 inches.
2820HSV1
1000V HACKSAW FRAMES WITH SCREEN HANDGUARD - DIPPED INSULATION For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820HSV2
A (inches) 12
B (inches) 3
L (inches) 18
Features UÊ Insulated hacksaw with 3906-300-18 Sandflex® bi-metal blade UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Handguard for ultimate protection UÊ Supplied with the reliable and shatterproof Sandflex® bi-metal blade 18TPI with excellent cutting performance and wear resistance UÊ Blade length: 12 inches.
524
2820HSV2
INSULATED TOOLS CUTTING TOOLS
ELECTRICIAN SCISSORS For protection against inadvertent shock when working on circuits up to 1000V. SC127V
Product Code SC127V
Length (inches) 5
Features UÊ UÊ UÊ UÊ
Single layer coating (only red coating) Small groove in the blade for stripping cables 2" cutting length Guard to avoid fingers touching the metallic part by mistake
Product Code SC150NGV
Length (inches) 6
Features UÊ UÊ UÊ UÊ
SC150NGV
2 layer coating: Red: safety. Yellow: danger Finger stops in both legs to avoid fingers touching the metallic part by mistake The longer handle allows to apply less force to cut a certain wire 1-1/2" cutting length
1000V ELECTRICIAN KNIVES For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820VP 2820VPC
2820VP
Description Knife with Straight Blade Knife with Curved Blade
Features
UÊ 3 layer coating insulation with different colors plus a 4th one in black to further protect handle edges. Red: safety. Orange: danger. Yellow: high danger UÊ Available in straight and curved blade versions
2820VPC
Product Code 2820VHELP
Description Knife with Guide
Features UÊ UÊ UÊ UÊ
Insulated 1000 V knife with guide. Single layer, injection molded, with protection cap Special blade with cable guard show for cable dismantling Stainless steel blade; handle shock resistant plastic
2820VHELP
1000 V TWEEZERS For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820VTEE
Features 2820VTEE
UÊ Double layer coating - red layer indicates safety, yellow layer indicates danger, plus a 3rd one in black to further protect handle edges.
525
INSULATED TOOLS PERSONAL PROTECTION EQUIPMENT
1000V GLOVES For protection against inadvertent shock when working on circuits up to 1000V. Product Code 2820VG05 2820VG10
Power Supply Volts 500 1000
Size 10 10
Material Thickness (mm) .5 1
Features 2820VG05 for use up to 500 V AC and 750 V DC 2820VG10 for use up to 1000 V AC and 1500 V DC Made of special natural latex for anatomical fit, good flexibility and dexterity Offers protection against electric arcs according to CENELEC ENV 50354 class 2 and IEC 61482-1 UÊ Cold resistance -40° C; Hot resistance 90° C UÊ UÊ UÊ UÊ
2820VG05
GLOVE LINERS Product Code 2820VGCOT
Size One Size
Features UÊ Light, flexible and comfortable under glove UÊ The high-quality cotton liner and the good fit offer a very good wearing comfort UÊ Under glove: under all glove types for the absorption of sweat and for the increase of wearing comfort THIS ITEM IS NOT INSULATED AND HAS TO BE USED WITH INSULATED GLOVES
2820VGCOT
INSULATED CARPET Product Code 2820VM
Features UÊ Valid for use up to 5000 V AC UÊ To stand on it and avoid earth connection when operating live systems. Complies with EN10204-3.1
2820VM
526