SERIA LC și SLU 800W – 2400W
Display
Fața
Spate
Aparatele din gama LC încorporează un invertor sinusoidal pur și un încărcător DC de baterie, iar cele din SLU încorporează pe lângă acestea și un încărcător solar suplimentar.
Cum funcționează acest aparat back up? Aparatul se conectează la INPUT la o priză, iar la OUTPUT se leagă la o baterie (de preferat cu ciclu profund). Atâta timp, cât rețeaua electrică furnizează curent electric, aparatul preia acest curent și îl transmite mai departe la consumator, iar încărcătorul de baterie menține încărcarea bateriei (sau încarcă pe acesta, dacă este descărcată). Modelele SLU prin încărcătorul solar încorporat completează încărcarea bateriei și de la panourile fotovoltaice. Încărcătorul solar funcționează independent de redresorul DC, deci chiar dacă aparatul nu este conectat la reteaua electrică, bateria este incărcată de la panourile fotovoltaice. Când se întrerupe curentul, aparatul trece automat la modul de baterie (inverter mode), asigurând curent electric fără intrerupere aparatelor electrice. Când invertorul sesizează, că se reia furnizarea curentului electric în rețea, automat se deconectează de la baterie, și va furniza curent electric de la priză, încărcând bateria. Mețiune: bateria nu este încorporata în acest aparat, ea se alege in funcție de necesitatea energetică a consumatorilor. Acestea nu sunt dispozitive UPS propriu zise!
Caractreristici generale pentru toate modelele:
LCD display Solar charge controller (SLU) Multistage charger Fast Action AC Synchronized Transfer Switch Microprocessor based design Heat-Sink built in internal Soft Start AVR design Input & Output isolated Auto temperature control fan Reverse polarity protection. / by fuse / diodes / Output short circuit protection Temperature protection Overload protection Input low voltage protection Input high voltage protection Low battery alarm Low battery shut-dow
Descriere:
Solar Inverter with LCD Display PURE SINE WAVE Inverter with DC battery charger and Solar charge controller Connect directly with Solar system Smart, powerful and successful
Specificații tehnice pentru modelele 800W, 1600W, 2400W: Model No.
PM-0800LC
PM-0800LC-24
Output Power Continuous
800W
Max. Surge Power
1600W 1. Input Section
Input Nominal Voltage
110Vac or 220Vac
Input Voltage Range
60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac ± 2% or 120Vac ± 2%
Line Low Return
65Vac ± 2% or 130Vac ± 2%
Line High Transfer
140Vac ± 2% or 280Vac ± 2%
Line High Return
130Vac ± 2% or 260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section Output Voltage
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel
Waveform Voltage Regulation (Batt. Mode) Output Frequency
Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz
Efficiency
> 75%
Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection
Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart
Power Factor
0.8
3. Battery Section Voltage Range
12VDC (10~16VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (5 steps selectable)
24VDC (20~32VDC)
45~70Hz > 40Amp
60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery
Beeping every 4 seconds Beeping every second
Overload
Beeping twice per second
Temperature Compensation (Option)
3mV / 째C cell
6. General date AC By Pass Time (UPS Mode)
< 8 ms.
Operation Temperature
-20 째C to +55 째C
Audible Noise
Less than 55dBA (at 1M)
Relative Humidity
0-95% non-condensing
Dimensions (L x W x H mm)
400 x 298 x 155
Weight (by Kg/s)
Model No.
14.0
PM-800SLU-12
PM-800SLU-24
Output Power Continuous
800W
Max. Surge Power
1600W
1. Input Section Input Nominal Voltage Input Voltage Range
120Vac or 220Vac 60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac +/- 2% or 120Vac +/- 2%
Line Low Return
65Vac +/- 2% or 130Vac +/- 2%
Line High Transfer
140Vac +/- 2% or 280Vac +/- 2%
Line High Return
130Vac +/- 2% or 260Vac +/- 2%
Input Frequency
Auto 50Hz/60Hz (45Hz~75Hz)
2. Output Section Output Voltage
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel
Waveform Voltage Regulation (Batt. Mode) Output Frequency
Pure Sine Wave < 3% RMS for entire battery voltage range ADJ. 50Hz or 60Hz +/- 0.1Hz
Total Harmonic Distortion Output THD Maximum Load Asymmetrical Load Max.
< 3% Up to short circuit Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor LCD Display LED Display
0.8 UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
Maximum Efficiency
85~92%
3. Battery Section Voltage Range
12VDC (10~16VDC)
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range
45~70Hz
Max. Charging Current (5 steps selectable for 12V)
> 40Amp
60/80/100Amp
12VDC
24VDC
Charging Voltage
13.8VDC
27.7VDC
Solar Max. Peak Voltage
25.0VDC
50.0VDC
12VDC
24VDC
(3 steps selectable for 24V) 4. Solar Charge Regulator-Floating Battery Voltage
Solar Charging Working Voltage Maximum Charging Current
50A
5. Audible Alarm Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
Solar Inverter Fault
Beeping continuously
Overload Temperature Compensation (Option)
Beeping twice per second 3mV /
cell
6. General date AC By Pass Time (UPS Mode)
<10ms max
Operation Temperature
-20
Max Current at Transfer Relay
40A / AC 220V
Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
Model No.
to +55
Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 400*298*155 14
PM-1600LC-24
Output Power Continuous
1600W
Max. Surge Power
3200W
1. Input Section Input Nominal Voltage
110Vac or 220Vac
Input Voltage Range
60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac ± 2% or 120Vac ± 2%
Line Low Return
65Vac ± 2% or 130Vac ± 2%
Line High Transfer
140Vac ± 2% or 280Vac ± 2%
Line High Return
130Vac ± 2% or 260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Efficiency Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection Power Factor
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz > 80% Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart 0.8
3. Battery Section Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery Overload Temperature Compensation (Option)
Beeping every 4 seconds Beeping every second Beeping twice per second 3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Dimensions (L x W x H mm) Weight (by Kg/s)
Model No.
< 8 ms. -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing 450 × 298 × 190 21.0
PM-1600SLU-24
Output Power Continuous
1600W
Max. Surge Power
3200W
1. Input Section
Input Nominal Voltage Input Voltage Range
120Vac or 220Vac 60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac +/- 2% or 120Vac +/- 2%
Line Low Return
65Vac +/- 2% or 130Vac +/- 2%
Line High Transfer
140Vac +/- 2% or 280Vac +/- 2%
Line High Return
130Vac +/- 2% or 260Vac +/- 2%
Input Frequency
Auto 50Hz/60Hz (45Hz~75Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Total Harmonic Distortion Output THD Maximum Load Asymmetrical Load Max.
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range ADJ. 50Hz or 60Hz +/- 0.1Hz < 3% Up to short circuit Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor LCD Display LED Display Maximum Efficiency
0.8 UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red) 85~92%
3. Battery Section Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Solar Charge Regulator-Floating Battery Voltage
24VDC
Charging Voltage
27.7VDC
Solar Max. Peak Voltage
25.0VDC
Solar Charging Working Voltage Maximum Charging Current
24VDC 50A
5. Audible Alarm Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
Solar Inverter Fault
Beeping continuously
Overload Temperature Compensation (Option)
Beeping twice per second 3mV /
cell
6. General date AC By Pass Time (UPS Mode)
<10ms max
Operation Temperature
-20
Max Current at Transfer Relay
20A / AC 220V
Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
Model No.
to +55
Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 450*298*190 21
PM-2400LC-24
Output Power Continuous
2400W
Max. Surge Power
4800W
1. Input Section Input Nominal Voltage
110Vac or 220Vac
Input Voltage Range
60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac ± 2% or 120Vac ± 2%
Line Low Return
65Vac ± 2% or 130Vac ± 2%
Line High Transfer
140Vac ¡Ó 2% or 280Vac ¡Ó 2%
Line High Return
130Vac ± 2% or 260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Efficiency Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection Power Factor
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz > 80% Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart 0.8
3. Battery Section Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery Overload Temperature Compensation (Option)
Beeping every 4 seconds Beeping every second Beeping twice per second 3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Dimensions (L x W x H mm)
< 8 ms. -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing 450 × 298 × 190
Weight (by Kg/s)
Model No.
23.0
PM-2400SLU-24
Output Power Continuous
2400W
Max. Surge Power
4800W
1. Input Section Input Nominal Voltage Input Voltage Range
120Vac or 220Vac 60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac +/- 2% or 120Vac +/- 2%
Line Low Return
65Vac +/- 2% or 130Vac +/- 2%
Line High Transfer
140Vac +/- 2% or 280Vac +/- 2%
Line High Return
130Vac +/- 2% or 260Vac +/- 2%
Input Frequency
Auto 50Hz/60Hz (45Hz~75Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Total Harmonic Distortion Output THD Maximum Load
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range ADJ. 50Hz or 60Hz +/- 0.1Hz < 3% Up to short circuit
Asymmetrical Load Max.
Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor LCD Display LED Display
0.8 UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
Maximum Efficiency
85~92%
3. Battery Section Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Solar Charge Regulator-Floating Battery Voltage
24VDC
Charging Voltage
27.7VDC
Solar Max. Peak Voltage
25.0VDC
Solar Charging Working Voltage
24VDC
Maximum Charging Current
50A
5. Audible Alarm Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
Solar Inverter Fault
Beeping continuously
Overload Temperature Compensation (Option)
Beeping twice per second 3mV /
cell
6. General date AC By Pass Time (UPS Mode)
<10ms max
Operation Temperature
-20
Max Current at Transfer Relay
40A / AC 220V
Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
to +55
Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 450*298*190 23
4000 W – 8000 W
Spate
Fata
Display
Specificații tehnice pentru modelele 4000W, 6000W, 8000W: Model No.
PM-4000LC-24
Output Power Continuous
4000W
Max. Surge Power
8000W
1. Input Section Input Nominal Voltage
110Vac or 220Vac
Input Voltage Range
60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac ± 2% or 120Vac ± 2%
Line Low Return
65Vac ± 2% or 130Vac ± 2%
Line High Transfer
140Vac ± 2% or 280Vac ± 2%
Line High Return
130Vac ± 2% or 260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Efficiency Maximum Load Asymmetrical Load Max.
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz > 80% Up to short circuit Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor
0.8
3. Battery Section Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery Overload
Beeping every 4 seconds Beeping every second Beeping twice per second
Temperature Compensation (Option)
3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Dimensions (L x W x H mm) Weight (by Kg/s)
Model No.
< 8 ms. -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing 600 × 415 × 260 49.2
PM-4000SLU-24
Output Power Continuous
4000W
Max. Surge Power
8000W
1. Input Section Input Nominal Voltage Input Voltage Range
120Vac or 220Vac 60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac +/- 2% or 120Vac +/- 2%
Line Low Return
65Vac +/- 2% or 130Vac +/- 2%
Line High Transfer
140Vac +/- 2% or 280Vac +/- 2%
Line High Return
130Vac +/- 2% or 260Vac +/- 2%
Input Frequency
50Hz or 60Hz (45Hz~75Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Total Harmonic Distortion Output THD Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection Power Factor LCD Display LED Display Maximum Efficiency 3. Battery Section
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz < 3% Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart 0.8 UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red) > 80%
Voltage Range
24VDC (20~32VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Solar Charge Regulator-Floating Battery Voltage
24V
Charging Voltage
27.7V
Solar Max. Peak Voltage
50.0V
Solar Charging Working Voltage
24.0V
Max. Charging Current
50A
5. Audible Alarm Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
Solar Inverter Fault
Beeping continuously
Overload Temperature Compensation (Option)
Beeping twice per second 3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
Model No. Output Power Continuous Max. Surge Power
<10ms max -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 600*415*260 49.2
PM-6000LC-48 6000W 12000W
1. Input Section Input Nominal Voltage
110Vac or 220Vac
Input Voltage Range
60V~140Vac or 120V~280Vac
Line Low Transfer
60Vac ± 2% or 120Vac ± 2%
Line Low Return
65Vac ± 2% or 130Vac ± 2%
Line High Transfer
140Vac ± 2% or 280Vac ± 2%
Line High Return
130Vac ± 2% or 260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section
Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Efficiency Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection
100 / 110 / 115 / 120Vac or 200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz > 80% Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart
Power Factor
1.0
3. Battery Section Voltage Range
48VDC (42~62VDC)
Backup Time (at full load)
Long time available
Input Frequency Range Max. Charging Current (3 steps selectable)
45~70Hz 60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery Overload Temperature Compensation (Option)
Beeping every 4 seconds Beeping every second Beeping twice per second 3mV /°C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Dimensions (L x W x H mm) Weight (by Kg/s)
Model No. Output Power Continuous Max. Surge Power 1. Input Section
< 8 ms. -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing 600 × 415 × 260 51.4
PM-6000SLU-48 6000W 12000W
Input Nominal Voltage Input Voltage Range
220/230/240Vac 120V~280Vac
Line Low Transfer
120Vac +/- 2%
Line Low Return
130Vac +/- 2%
Line High Transfer
280Vac +/- 2%
Line High Return
260Vac +/- 2%
Input Frequency
50Hz or 60Hz (45Hz~75Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Total Harmonic Distortion Output THD Maximum Load Asymmetrical Load Max. Overload and Short Circuit Protection Overheating Temperature Protection Power Factor LCD Display LED Display Maximum Efficiency
200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz < 3% Up to short circuit Up to nominal output power Automatic disconnection Acoustic warning before shut-off. Automatic restart 1.0 UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red) > 80%
3. Battery Section Voltage Range Backup Time (at full load) Input Frequency Range Max. Charging Current (3 steps selectable)
48VDC Long time available 45~70Hz 60/80/100Amp
4. Solar Charge Regulator-Floating Battery Voltage
48V
Charging Voltage
55.2V
Solar Max. Peak Voltage
100V
Solar Charging Working Voltage
44.0V
Max. Charging Current
50A
5. Audible Alarm Battery Mode Low Battery
Beeping every 4 seconds Beeping every second
Solar Inverter Fault Overload Temperature Compensation (Option)
Beeping continuously Beeping twice per second 3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
Model No. Output Power Continuous Max. Surge Power
<10ms max -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 600*415*260 51.4
PM-8000LC-48 8000W 16000W
1. Input Section Input Nominal Voltage
220Vac only
Input Voltage Range
120V~280Vac
Line Low Transfer
120Vac ± 2%
Line Low Return
130Vac ± 2%
Line High Transfer
280Vac ± 2%
Line High Return
260Vac ± 2%
Input Frequency
50Hz / 60Hz (45Hz~70Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Efficiency Maximum Load Asymmetrical Load Max.
200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz ± 0.1Hz > 80% Up to short circuit Up to nominal output power
Overload and Short Circuit Protection
Automatic disconnection
Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
Power Factor
1.0
3. Battery Section Voltage Range
48VDC (42~62VDC)
Backup Time (at full load)
Long time available
Input Frequency Range
45~70Hz
Max. Charging Current (3 steps selectable)
60/80/100Amp
4. Display LCD Display LED Display
UPS status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red)
5. Audible Alarm Battery Mode Low Battery Overload Temperature Compensation (Option)
Beeping every 4 seconds Beeping every second Beeping twice per second 3mV / °C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Dimensions (L x W x H mm)
< 8 ms. -20 °C to +55 °C Less than 55dBA (at 1M) 0-95% non-condensing 600 × 415 × 260
Weight (by Kg/s)
Model No. Output Power Continuous Max. Surge Power
55.0
PM-8000SLU-48 8000W 16000W
1. Input Section Input Nominal Voltage Input Voltage Range
220/230/240Vac 120V~280Vac
Line Low Transfer
120Vac +/- 2%
Line Low Return
130Vac +/- 2%
Line High Transfer
280Vac +/- 2%
Line High Return
260Vac +/- 2%
Input Frequency
50Hz or 60Hz (45Hz~75Hz)
2. Output Section Output Voltage Waveform Voltage Regulation (Batt. Mode) Output Frequency Total Harmonic Distortion Output THD Maximum Load Asymmetrical Load Max.
200 / 220 / 230 / 240Vac re-settable via LCD panel Pure Sine Wave < 3% RMS for entire battery voltage range 50Hz or 60Hz < 3% Up to short circuit Up to nominal output power
Overload and Short Circuit Protection Overheating Temperature Protection Power Factor LCD Display LED Display Maximum Efficiency
Automatic disconnection Acoustic warning before shut-off. Automatic restart 1.0 UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model Normal (Green), Warning (Yellow), Fault (Red) > 80%
3. Battery Section Voltage Range Backup Time (at full load) Input Frequency Range Max. Charging Current (3 steps selectable)
48VDC Long time available 45~70Hz 60/80/100Amp
4. Solar Charge Regulator-Floating Battery Voltage
48V
Charging Voltage
55.2V
Solar Max. Peak Voltage
100V
Solar Charging Working Voltage
44.0V
Max. Charging Current
50A
5. Audible Alarm Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
Solar Inverter Fault
Beeping continuously
Overload Temperature Compensation (Option)
Beeping twice per second 3mV / 째C cell
6. General date AC By Pass Time (UPS Mode) Operation Temperature Audible Noise Relative Humidity Accessory Dimensions (L x W x H mm) Net Weight (by Kg/s)
<10ms max -20 째C to +55 째C Less than 55dBA (at 1M) 0-95% non-condensing DC cable (option) 600*415*260 55