Toile One Spiral Trousers Design Selection One
For this patteren i used the trouser block to draw style lines of where i wanted the drawstrings. I used 3d tool ‘set as 3d’ for the lines that would be elasticated. Once opened in 3d i was able to make these lines elasticated.
Toile One Drawstring Dress// Design Selection One The tool in 3d to set a line as elasticated work well for this pattern as it showed the effect the drawstrings would have. further develop would be needed to show the rib neck and cuffs.
Toile Two Parachute Coat//Outtt One To scale my pattern up i used the shrinkage function on modaris to scale my pattern up. The scaling up tool worked well for this pattern as in the neckline where the si had grown a size drawstring would be placed there to draw in a t the body better.
I used 3d to work with print placement on the sports bra. I also found the drawing on to the 3d avitar a useful function so i could change how low the nextline could be.
Toile One Sports bra// Outfit One
Final Leggings for Outtt One// Once i had 3d t the leggings and coat i could put the whole outtt onto the 3d avatar.
Toile Two Drawstring shorts//Outtt Three On modaris i cut diagonally to allow the drawstrings to have a better shape. This then worked better on 3d when the line was elasticated.
Final Leggings for Outfit Three// I used 3d to put my fabirc in with the colour of the jersey too.
Final Leggings For Outfit Four//
Toile One Hoody//Outtt Six 3d was used to see the shape of the hood and see if the drawsrings on the hem and sleeve created a nice shape. With the block on modaris i used the loose tting top and lowered the sleeve to be wider a in the armhole and shortened the sleeve.
Sophia Church
Sophia Church