TSI Training Specialties, Inc. 2015-2106 Catalog by Source Publications

TA B L E O F C O N T E N T S

Training Specialties Inc. is a full service company, providing product, equipment, service and training to the major oil and petro chemical industries. This catalog contains only proprietary equipment and does not represent all the products and services offered by TSI. PRODUCT LINES . . . . . . . . . . . . . . . . . . . . . . . . . 4 GENERAL SERVICES. . . . . . . . . . . . . . . . . . . . . . 5 APPARATUS SERVICES . . . . . . . . . . . . . . . . . . . 6 TRAINING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 EMERGENCY PRE-PLAN TRAINING . . . . . . . . 8 PUMPS • TSI MAX-6000 . . . . . . . . . . . . . . . . . . . . . . . 9 • TSI MAX-6000 Specs . . . . . . . . . . . . . . . . . 10 • TSI MAX-4000 Specs . . . . . . . . . . . . . . . . 11 • TSI MAX-3000 Specs . . . . . . . . . . . . . . . . 12 • Trailer Mounted Pump Unit. . . . . . . . . . . . . 13 • Trailer Mounted Pump Unit Diagram . . . . . 14 • Skid Mounted Pump Unit Diagram . . . . . . . 15 • GODWIN Dri-Prime® HL260M . . . . . . . . . . . . . . . . . . . . . . . . 16 • TSI Tote Trailer . . . . . . . . . . . . . . . . . . . . . . 17 MANIFOLDS • Pump Discharge with Valving . . . . . . . . . . . 18 • Distribution Discharge with 8” Storz Connection . . . . . . . . . . . . 19 MONITORS • NOZZLES • FITTINGS • PRO/pak® . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • Master Foam - Fixed GPM . . . . . . . . . . . . . 21 • Mater Stream 1250 Series . . . . . . . . . . . . . 22 • BLITZFIRE®. . . . . . . . . . . . . . . . . . . . . . . . . 23 • BLITZFIRE OSC® . . . . . . . . . . . . . . . . . . . . 24 • CROSSFIRE® Series . . . . . . . . . . . . . . . . . 25 • TYPHOON Manually Controlled Monitor Up to 1500 GPM . . . . . . . . . . . . . . . . . . . 26 • MONSOON Manually Controlled Monitor Up to 2000 GPM . . . . . . . . . . . . . . . . . . . 27 • PROTECTOR Fixed Station Monitor Up to 1250 GPM . . . . . . . . . . . . . . . . . . . 28 • Valve Under Monitor Manual Handwheel Control . . . . . . . . . . 29

•

Valve Under Monitor Electric Remote Control . . . . . . . . . . . . . 30 • Valve Under Monitor Auxiliary Port . . . . . . . . . . . . . . . . . . . . . 31 • Jumbo Short Ball Intake Valve . . . . . . . . . . 32 • Jumbo Ball Intake Valve . . . . . . . . . . . . . . . 32 • Hard Suction Hose . . . . . . . . . . . . . . . . 33-34 • 5-Way Valved Manifold . . . . . . . . . . . . . . . . 35 • Industrial Nozzles . . . . . . . . . . . . . . . . . . . . 36 • Industrial Valve Under Monitor . . . . . . . . . . 37 • Hydrant Under Monitor . . . . . . . . . . . . . 38-40 • Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 • Hemisphere Monitor . . . . . . . . . . . . . . . . . . 42 • Stang Monitor 4.0” Super Low-Pro . . . . . . . . . . . . . . . . 43 4.00” Deck . . . . . . . . . . . . . . . . . . . . . . . 44 6.0” Super Low-Pro . . . . . . . . . . . . . . . . 45 6.00” SLP . . . . . . . . . . . . . . . . . . . . . . . . 46 6” Spray Nozzle w/ Electric Blabber. . . . 47 6” Hydrant. . . . . . . . . . . . . . . . . . . . . . . . 48 Elevated Systems. . . . . . . . . . . . . . . . . . 49 Manual Elevated Systems . . . . . . . . . . . 50 Oscillating Elevated Systems . . . . . . . . . 51 Remote Standpipe Systems. . . . . . . . . . 52 Remote Tower Systems . . . . . . . . . . . . . 53 DELIVERY SYSTEMS / FOAMS • Iron Man . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 • Foam Chambers & Makers . . . . . . . . . . 55-57 • Foam Concentrate Transfer & Nursing Equipment . . . . . . . . . . . . . . 58 • Foam Types . . . . . . . . . . . . . . . . . . . . . . . . 59 LARGE DIAMETER HOSE & ACCESSORIES . . . . . . . . . . . . . . . . . . . . . 60 • Hose Reel with Foam Eductor . . . . . . . . . . 61 • The Rookie Sidekick All-in-One . . . . . . . . . 62

Our team at TSI is committed to protecting and safeguarding our most important asset...YOU. Gulf Coast Office: East Coast Office: 4010 Poplar Ridge Ct. 300 N. Pottstown Pike, Suite 190 Baton Rouge, LA 70816 P.O. Box 1167, Exton, PA 19341 Phone: Fax:

225-756-4340 225-756-4342

Phone: Fax:

610-524-2522 610-524-2575

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PRODUCT LINES TASK FORCE TIPS • GODWIN PUMPS • DECHUTES RIVER MANUFACTURING ZIAMATIC • BUCKEYE • AKRON BRASS • ANGUS • HALE PUMP • NATIONAL FOAM ACTION COUPLING • CHIEFTAIN • FEECON • ELKHART • CLASS I KOCHEK • RED HEAD • STANG • ANSUL • SECURITEX• NIEDNER • KUSSMAUL DYNE TECHNOLOGIES • FIRE RESEARCH • WATEROUS • W. S. DARLEY HIGHWATER HOSE • HANNAY REELS • KEY FIRE HOSE • FIRE LINE FOAM PUMP SOLBERG FOAM • ACCUMAX FOAM SYSTEMS • BERMAD VALVE HI VOLUME PUMPS: • • • •

Diesel 3K, 4K & 6K Pumps Hydraulic & Electric Pumps Generators, Light Towers Rental & Lease Units Available

SAFETY EQUIPMENT: • • •

Protective Clothing Bunker Gear Boots, Helmets & Gloves

HOSE & EQUIPMENT: MONITORS, NOZZLES & HARDWARE: • • • • • • • • • • • •

TFT Proprietary Equipment Monitor Nozzles Portable Monitors & Carts Foam Nozzles Self-Educting Foam Nozzles Hand Line Nozzles High Capacity Foam Nozzles Oscillating & Remote Monitors Brass Fittings & Adapters Storz Fittings International Adapters for Ship & Shore Quick Attack Pickup Monitors

FOAM EQUIPMENT: • • • • • • •

Concentrates, Class “A” & “B” Hose Reel Foam Stations 30 & 60 Gallon Apparatus, Pumpers & Aerials Nurse & Tote Trailers Proportioning Systems ASME Bladder Tanks Chambers & Foam Makers

• • • • • •

Large Diameter Hose, 6”, 8” & 12” Single & Double Jacket Hose Hose Reels, Carts & Cabinets Hose Trailers Hytrans Hose Recovery Systems Custom Stainless Steel Manifolds

CONSULTING & RISK ANALYSIS: • • • • •

Facility Risk Analysis Apparatus Specification Writing Facility & Tank Farm Fire Fighting Pre-Plans Foam Chamber Protection Programs

SERVICES: • • • • • •

Product Specific Training Fixed Systems Start-Up, Testing & Inspection Apparatus Training Foam Concentrate Testing NFPA Apparatus Testing Service Fire

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

GENERAL SERVICES

A p p a r a t u s Fo a m S y s t e m I n j e c t i o n Te s t i n g TSIâ&#x20AC;&#x2122;s experience with industrial apparatus foam systems is unsurpassed in the industry. Our 200-plus years designing, fabricating and testing gives our technicians the upper hand on foam injection calibration. Is your apparatus injecting properly?

F i x e d a n d S e m i F i x e d Fo a m S y s t e m Te s t i n g TSI will come to your facility and check your fixed and semi- fixed foam systems. This inspection covers liquid concentrate inspection, piping and valve operation, prime mover/ pump and panel controls. Injection tests will be done as customer requests.

Apparatus Specification Writing TSI will assist the truck committee on spec writing to assure everything from bumper to bumper is included. After an inspection of plant, hazards and logistics, a complete specification can be drafted for the bid process.

N F PA A p p a r a t u s T e s t i n g TSI will come to your facility and perform the annual NFPA water pump testing procedure. Any deficiencies will be corrected, new fluids replaced and the customer will receive a printed document of the complete service and testing that was done, certificate of pump test and RPM plate.

Ta n k C h a m b e r P r o g r a m TSI will make an assessment of your tank farm. Each tank will be shown as well as hydrant access, local roads and overall view of tank relative to farm. Flow calculations may be included in this program along with setup procedures.

8 8 8 - 4 4 8 - 2 5 2 2 â&#x20AC;˘ w w w. T r a i n i n g S p e c s . c o m

A P PA R AT U S S E R V I C E S T E S T I N G A N D C E R T I F I C AT I O N With TSI as your Third Party inspection agent, we bring over 200 years of combined fire service experience. New Apparatus: • • • • •

New apparatus specification preparation. New apparatus specification review and approval. New apparatus in progress inspections. On site NFPA acceptance testing. On site foam system proportioning accuracy testing of your new apparatus.

Existing Apparatus Ser vices: • • • • • • • •

Large diameter hose discharge installations. New monitor installations. Additional discharge installations. Water/Foam piping system upgrades. NFPA certification testing. Routine apparatus maintenance. Water/Foam pump repairs. Foam system conductivity testing.

A p p a r a t u s Te s t i n g & R e c e r t i f i c a t i o n P r o g r a m Chassis Inspection: Engine oil level; Transmission level; Idle speed; Power steering Fluid level Water Pump Check: Relief valve operation; Pump oil level; Primer pump operation and level Pump shifting performance; Drain Valves; Auxiliary cooler; Volume/pressure control operation; Discharge valve controls; Compound and Duplex gauge; Pump packing Liquid Pump Check: Pump packing; Pump lubrication; Pump drive system and motor; Related valves and controls; Operation System controls Electrical System: Head lights; Parking lights; Directional signals; Clearance lights; Interior cab lights; Horns Wipers Foam System Check: Hydraulic tank oil and level; Tank breather; Valves; Hoses; Controls; Selector functions; Indicator lights Filters Pump Certification: 150 psi 1 hr. rated capacity test 165 psi 10 min. rated capacity test 200 psi 15 min. rated capacity test 250 psi 15 min. rated capacity test Note: 1. Supply new pump rate & engine speed plate per test results. 2. All tests are performed from a draft condition Foam Concentrate Injection Testing: NFPA 1901 requires foam system accuracy testing be performed prior to delivery of new apparatus by the manufacturer. Even though NFPA does not required yearly testing, a yearly system check is recommended. Just as fire pumps and fire hose is tested, IFSTA recommends a yearly system check. Designed to check the foam system accuracy at the design parameters according to the apparatus manufacturer. Each foam discharge is tested for proper flow and accuracy, assuring the customer the apparatus is accurately flowing foam at a fixed percentage, and that each discharge is proportioning foam concentrate at the set percentage, according to NFPA 11 standards for foam system operations. TSI will check each discharge at 1% - 3% - 6% using the water equivalency method. Every discharge will be flowed at the manufacturer’s recommended nominal flow. A calibrated flow meter will be placed into the aux. liquid suction connection and the above injection points will be verified. TSI can make field adjustments on National Foam Servo Command and Pierce Husky units.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

TRAINING A P PA R AT U S T R A I N I N G TSI is proud of all our apparatus training courses. Each course can be designed for a specific apparatus, skill level of the department personnel and, most important, using the departments equipment and training at their facility. Both in-class PowerPoint presentations and field exercises give the department hands-on experience. Call us to discuss the training opportunities we may schedule for you.

Aerial Oper ations, Foam/Water This program provides the student with the required knowledge and skills to safely assess the incident maneuver and position the apparatus at an incident. Enable him/her to establish required flows to either assisting apparatus or foam/water delivery devices, and begin initial fire attack using water, foam, or both. At the completion of this program the student will have sharpened his/her skills and heightened their level of competency. Program Outline: Safety Maneuvering the Apparatus Fire Ground Placement Chassis Familiarization Aerial Device Familiarization Water Pump Operations Foam Pump Operations Foam Concentrates

Large Diameter Hose Familiarization of Aerial Device Fire Scene Positioning Operating During a System Failure Apparatus Inspections & Testing Fire Ground Hydraulics Foam Concentrate Nursing Operations Maintenance

Engine Oper ations, Foam/Water This program provides the student with the required knowledge and skills to safely assess the incident maneuver and position the apparatus at an incident. Understand basic fire ground hydraulics. Provide the student with the skills to establish required flows to begin initial fire attack using foam and water. At the completion of this program the student will have sharpened his/her skills and heightened their level of competency. Program Outline: Safety Fire Ground Positioning Chassis Familiarization Water Pump Operations Foam Pump Operations Large Diameter Hose Fire Ground Hydraulics Water Relay Operations

Foam System Flushing Operations Fire Scene Positioning Operating During a System Failure Apparatus Inspection & Testing Concentrate Nursing Operations Foam Concentrates Trouble Shooting

8 8 8 - 4 4 8 - 2 5 2 2 â&#x20AC;˘ w w w. T r a i n i n g S p e c s . c o m

EMERGENCY PRE-PLAN SERVICES

TSI is proud to announce its new Emergency Pre-Plan services. TSI will come to a customer’s facility and work with them to develop specific emergency pre-plans for that location.

SCOPE OF WORK: • •

• • • • • • • • • • • • • • •

Initial visit to site Review the facility (process areas, truck rack, tank car rack, the north and south tank fields, etc.) with individuals who are familiar with the location, i.e., operators, building manager, fire protections specialists, etc. Locate and understand target hazards of the facility Review any fixed fire protection systems, i.e., sprinklers, halon systems, water supply, fire water monitors, fire extinguishers, fire water hose stations, foam supplies, etc. Review facility’s emergency alarm systems and procedures Identify drainage features of the facility Review portable fire pumps (location, size, etc.), review types and sizes of fire hose both on apparatus and in reserve Review facility’s mobile emergency response apparatus. Insure fire emergency response apparatus has access in and around the facility and can egress if necessary Determine what kind of mutual aid is available (industrial, municipal) and how much equipment Identify primary and secondary sources of water Review communication links with the facility, i.e., telephones, radios, cell phones, etc. Identify individuals who can be used as liaisons between the emergency response personnel and the facility Analyze evacuation locations Understand facility’s construction materials including any fireproofing or special construction features Identify any special needs for the location being pre-planned Keep pre-emergency plan documents with first due emergency response equipment with additional copies for the Incident Commander and at the EOC Review personnel resources (fire brigade, makeup, training, etc.)

SAMPLE PROGRAMS: • Process Unit Pre-Plan • Marketing Tank Field • T-101 See our website for information about these programs.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI MAX-6000 PUMP

TSI CUSTOMER DESIGNED MAX-6000 • C18 Caterpillar Engine • 3409 Gould Pump • Heavy Duty Clutch • Dry-Prime • Touch Pad Instrument Panel • Custom Stainless Steel Manifolds 12” VIC Inlet and 6 each 6” Inlets • TFT Protector Monitor w/Nozzle • Skid Mounted with Integral Fuel Tank • Custom Lifting Frame TSI Max Pumps can be customer designed to meet your specific needs. Please call our office for additional information.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI MAX-6000 SPECS

Prime Mover : Engine: Horsepower: Fuel: Fuel consumption: Fuel/water separator: Fuel priming pump: Filters:

Electrical: Alternator 24 VDC: Batteries: Battery charger: Lighting:

Caterpillar C-18 ACERT 700 hp @ 2100 rpm 325 gallon skid mounted 34.0 GPH Fuel separator 24VDC priming pump Fuel, oil, water

60 amp w/regulator Dual 8D group 31 1100 CCA Kussmaul 24 V w/auto-eject Four (4) 12 VDC scene lights on pump

Gauge Panel: Std. Caterpillar complete engine package Ignition switch Throttle Digital tachometer Fuel pressure Engine oil pressure Engine water temperature Amp meter Hour meter Emergency shutdown switch 3” compound gauge 3” discharge gauge

Cooling: Fan: Push fan Turbo: Air to Air after cooler Fuel: In line air/fuel cooler

Water Pump: Manufacture: Model: Capacity: Impeller: Packing: Self Priming: Suction inlet: Suction Manifold: Discharge outlet: Discharge Manifold: Discharge Valves:

Tr a i l e r : Manufacture: Model: Hitch: Axles: Lighting:

Gould Pump ITT 3409M 10 x 14-20L 6000 gpm @ 150 psi ASTM B584-836 Graphite impregnated Godwin Dri-Prime 14” 6 each 6” inlets 10” 6 each 6” outlets 6 each TFT BIV x 5” storz

Godwin TSG-26 Pintle Ring Three DOT compliant

Suction Manifold: Inlets: 6 each 6” MNH inlets Drain: 1” drain Lifting eyes: Two, one each side Material: Sch 10/40 stainless steel

Discharge Manifold: Outlets: 6 each 6” MNH outlets Drain: 1” drain Lifting eyes: Two, one each side Valves: 6 each 6” x 5” storz BIV elbow Material: Sch 10/40 stainless steel

Loose Equipment: Wheel chocks: 2 wheel chocks and brackets Exhaust: Spark Arrestor: Rain Cap: Exhaust Wrap:

Residential quiet guard SS rain cap provided Manifolds/spark arrestor wrapped

Ser vice Centers: 24 hour emergency service center

Tr a i n i n g : TSI will provide training on this pump at customer facility.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI MAX-4000 SPECS

Prime Mover : Engine: Horsepower: Fuel: Fuel consumption: Fuel/water separator: Filters: Frame:

Electrical: Alternator 24 VDC: Batteries: Battery charger: Lighting:

Caterpillar C-15 ACERT 420 hp @ 1800 rpm 250 gallon skid mounted 34.0 GPH Fuel separator Fuel, oil, water Steel frame with 4 corner lifting eyes

60 amp w/regulator Dual 8D group 31 1100 CCA Kussmaul 24 V w/auto-eject Four (4) 12 VDC scene lights on pump

Water Pump: Manufacture: Model: Capacity: Impeller: Packing: Self Priming: Suction inlet: Suction Manifold: Discharge outlet: Discharge Manifold: Discharge Valves:

Gould Pump ITT 3409-M 4000 gpm @ 150 psi ASTM B584-836 Graphite Godwin Dri-Prime 12” 4 each 6” inlets 10” 4 each 6” outlets 4 each TFT BIV x 6” storz

Suction Manifold: Inlets: 4 each 6” MNH inlets Drain: 1” drain Lifting eyes: Two, one each side Valves: 4 each 6” x 6” storz BIV Material: Sch 10/40 stainless steel

Discharge Manifold: Outlets: 3 each 6” MNH outlets Drain: 1” drain Lifting eyes: Two, one each side Valves: 3 each 6” x 6” storz BIV Material: Sch 10/40 stainless steel

Loose Equipment: Wheel chocks: 2 wheel chocks and brackets Hard suction hose: 4 each 6” x 20’ HSH Floating strainers: 4 each 6” FNH floating strainers

Cooling: Fan: Push fan Turbo: Air to Air after cooler Fuel: In line air/fuel cooler Ser vice Centers: 24 hour emergency service center Exhaust: Spark Arrestor: Rain Cap: Exhaust Wrap:

Residential quiet guard SS rain cap provided Manifolds/spark arrestor wrapped

Tr a i n i n g : TSI will provide training on this pump at customer facility.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI MAX-3000 SPECS

Prime Mover : Engine: Horsepower: Fuel: Fuel consumption: Fuel/water separator: Filters: Frame:

Electrical: Alternator 24 VDC: Batteries: Battery charger: Lighting:

Caterpillar C-15 ACERT 475 hp @ 1800 rpm 250 gallon skid mounted 34.0 GPH Fuel separator Fuel, oil, water Steel frame with 4 corner lifting eyes

60 amp w/regulator Dual 8D group 31 1100 CCA Kussmaul 24 V w/auto-eject Four (4) 12 VDC scene lights on pump

Water Pump: Manufacture: Model: Capacity: Impeller: Packing: Self Priming: Suction inlet: Suction Manifold: Discharge outlet: Discharge Manifold: Discharge Valves:

Gould Pump 8 x 12 – 22L 3000 gpm @ 150 psi ASTM B584-836 Graphite Godwin Dri-Prime 12” 3 each 6” inlets 10” 3 each 6” outlets 3 each TFT BIV x 6” storz

Suction Manifold: Inlets: 3 each 6” MNH inlets Drain: 1” drain Lifting eyes: Two, one each side Valves: 3 TFT 6” x 6” storz BIV Material: Sch 10/40 stainless steel

Discharge Manifold: Outlets: 3 each 6” MNH outlets Drain: 1” drain Lifting eyes: Two, one each side Valves: 3 each 6” x 6” storz BIV Material: Sch 10/40 stainless steel

Loose Equipment: Wheel chocks: 2 wheel chocks and brackets Hard suction hose: 3 each 6” x 20’ HSH Floating strainers: 3 each 6” FNH floating strainers

Cooling: Fan: Push fan Turbo: Air to Air after cooler Fuel: In line air/fuel cooler Ser vice Centers: 24 hour emergency service center Exhaust: Spark Arrestor: Rain Cap: Exhaust Wrap:

Residential quiet guard SS rain cap provided Manifolds/spark arrestor wrapped

Tr a i n i n g : TSI will provide training on this pump at customer facility.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI CUSTOM DESIGNED TRAILER MTD MAX 6000

• C18 Caterpillar Engine • 3409 Gould Pump • Heavy Duty Clutch • Dry-Prime • Touch Pad Instrument Panel • Custom Stainless Steel Manifolds 12” VIC Inlet and 6 each 6” Inlets • TFT Protector Monitor w/Nozzle • Skid Mounted with Integral Fuel Tank • Custom Lifting Frame TSI Max Pumps can be customer designed to meet your specific needs. Please call our office for additional information.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TRAILER MOUNTED PUMP UNIT

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS SKID MOUNTED PUMP UNIT

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS

NO PRIMING The Godwin Dri-Prime® family of automatic self-priming pumps are always ready to go. No priming, no worries—our unique design means you can start dry and run dry without any damage. The Dri-Prime self-priming system has no moving parts and requires very little maintenance. All Dri-Prime pumps have a number of features designed for longer life: a cast chromium steel impeller, oil-bath mechanical seal, 25 percent cast chromium steel wear plates, and more. You can also set Dri-Prime pumps to run automatically, so that they kick on when they’re needed and shut off when the water level is down. That’s true for both diesel and electric models, thanks to our PrimeGuard controller, a state-of-the-art control system with automatic start/stop. If you’ve ever had to venture out in a late-night rainstorm to prime a pump, you’ll appreciate the automatic self-priming features.

HL-260M Dri-Prime® Pump The Godwin Dri-Prime 10" x 10" HL260M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL260M offers flow rates up to 4,760 gpm, total dynamic heads up to 500 feet, and solids handling up to 3" in diameter. Like all Godwin pumps, the HL260M includes the Dri-Prime air ejector priming system for fully automatic priming up to 28 feet of static suction lift.

F E AT U R E S

• Fully automatic priming from 28 feet of suction lift. Maximum heads to 500 feet. Maximum flows to 4,760 gpm.

• Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.

• Handles sludges and solids-laden liquids with solids up to 2-9/16" in diameter.

• Mounted to a structural steel skid with integral 250 gallon fuel tank and lifting bail.

• Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.

• Standard engine Caterpillar C15 diesel. Other engines available. Electric drive version also available.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

PUMPS TSI TOTE TRAILERS

F E AT U R E S • Dual or Triple 275 gallon tote capacity • Easy slide locking tray for each tote • Stainless Piping under trailer to foam manifold • Stainless water manifold under A Frame of trailer • Two hose bins with 200 feet of 1.75” hose • One 4” TFT monitor and self educting nozzle • Lunette or Gooseneck attachment DOT lighting package • Urethane paint Contact your TSI sales rep for other options and design

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MANIFOLDS P U M P D I S C H A R G E W I T H VA LV I N G

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MANIFOLDS DISTRIBUTION DISCHARGE WITH 8” STORZ CONNECTION

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS 1” (25mm) & 1.5” (38mm) PRO/pak®

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS MASTER FOAM - FIXED GPM

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS MASTER STREAM 1250 SERIES

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

MAX-SERIES NOZZLES

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

O S C C O M B I N AT I O N PA C K A G E S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS VA LV E U N D E R M O N I TO R

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS VA LV E U N D E R M O N I TO R

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS VA LV E U N D E R M O N I TO R

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS J U M B O S H O R T B A L L I N TA K E V A L V E

J U M B O B A L L I N TA K E V A L V E

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HARD SUCTION HOSE

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HARD SUCTION HOSE

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS 5 - W AY V A L V E D M A N I F O L D

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS INDUSTRIAL NOZZLES

ZM INDUSTRIAL NOZZLES

ZO INDUSTRIAL NOZZLES

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS I N D U S T R I A L VA LV E U N D E R M O N I TO R

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HYDRANT UNDER MONITOR

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HYDRANT UNDER MONITOR

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HYDRANT UNDER MONITOR

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS BOOSTERS

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS HEMISPHERE MONITOR

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R , 4 . 0 ” S U P E R L O W - P R O

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - 4 . 0 0 ” D E C K

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - 6 . 0 ” S U P E R L O W - P R O

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - 6 . 0 0 ” S L P

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - 6 ” S P R AY N O Z Z L E WITH ELECTRIC BLABBER

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - 6 ” H Y D R A N T

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - E L E V AT E D S Y S T E M S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - M A N U A L E L E V AT E D S Y S T E M S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R O S C I L L AT I N G E L E V AT E D S Y S T E M S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R R E M O T E S TA N D P I P E S Y S T E M S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

MONITORS•NOZZLES•FITTINGS S TA N G M O N I T O R - R E M O T E T O W E R S Y S T E M S

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S IRON MAN The National Foam Iron Man 8000 GPM high capacity mobile foam delivery device offers outstanding performance. Iron Man proves its versatility and superiority with excellent foam stream quality, ranges in excess of 450 ft., 340º of free rotation and a +15º to 90º range of elevation. Iron Man utilizes a specially engineered non self-educting nozzle that offers a foam expansion ratio of 6.6:1 creating an efficient foam stream better suited for penetrating thermal updrafts encountered during large scale fires. The nozzle delivers 8000 GPM at a nominal pressure of 115 PSI. The stainless steel monitor, fed by a single 12" Victaulic or Storz hose connection, is mounted on a custom built trailer which when filled with water, acts as the unit stabilizer during operation. Iron Man is supplied with a 'pony tail' 25 ft. length of 12" Super Aquaduct hose as standard with a 12" inlet manifold that may be configured to (6) 6" or 5" Storz connections, offering immense flexibility in water supply.

F E AT U R E S • Outstanding foam stream range. • Superior quality foam stream with minimal fallout. • Immense monitor movement flexibility. • Hydraulically operated stream pattern changer from straight stream to semi-fog. Does not require shutdown to change pattern. • Compatible with all major types of foam concentrate. • Variable GPM Tip Kit available.

FOAM PROPORTIONING The simplest method of introducing foam in to the Iron Man water flow is through the use of jet pumps. A configuration of (2) 3000 GPM and (1) 2000 GPM National Foam jet pumps, for 3% or 6% foam, proportioning provides an effective solution at a total flow of 8000 GPM. Key benefits of using jet pumps are improved logistics and greater flexibility offered in positioning your foam station.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S FOAM CHAMBERS & MAKERS

MCS TYPE B FOAM MAKER & FOAM CHAMBER The MCS Type B Foam Maker and Foam Chamber is designed to introduce expanded foam directly onto the surface of a flammable or combustible liquid for fire extinguishment and/or vapor suppression. Classified as a Type II discharge device in accordance with NFPA Standard 11, foam chambers deliver low expansion foam directly onto the fuel surface with a minimum of foam submergence and fuel agitation. Minimizing submergence and agitation increases the effectiveness of the foam blanket, resulting in more efficient operation, and superior extinguishing capabilities. Foam chambers have the added advantage of directing all their flow directly onto the product surface regardless of weather conditions, for the most effective utilization of foam resources. Foam chambers have a long history of timely and safe control of numerous incidents. Foam chambers are compatible with all types of foam concentrate; protein, fluoroprotein, AFFF, and AR-AFFF. They are generally installed on the side wall of vertical storage tanks above the maximum product level. Piping coupled to the unit can be linked to a fixed foam proportioning system, or terminated a safe distance from the tank, where foam solution can be delivered via mobile fire apparatus or portable foam proportioning equipment. • Four Sizes • Superior Foam Quality • Operates at 30 PSI (2.1 bar) minimum • Tool Free Maintenance • Corrosion Resistant Polyester Finish or Corrosion Resistant 316 Stainless Steel Construction

DISCHARGE CLOSURE MCS TYPE FOAM CHAMBERS The National Foam Discharge Closure is designed to provide a positive seal between the foam chamber and the product storage tank. It is designed to install directly between the foam chamber discharge flange and the tank shell. It is primarily used on tanks containing products which can polymerize or solidify in the chamber nozzle and in situations where the product stored is not compatible with the foam chamber construction materials. The Discharge Closure can also be used for containment of pressurized inert gas blankets. FEATURES • Easy installation, even on existing tanks. • Prevents product from entering chamber. • Ease of maintenance. • Reversible, cannot be installed incorrectly. APPLICATIONS • Storage tanks containing products such as styrene which can polymerize. • Storage tanks containing products which attack the foam chamber standard construction materials. • Inert gas blanketed tanks.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S FOAM CHAMBERS & MAKERS

SPS-9 FOAM MAKER The SPS-9 foam maker is designed to deliver fully aspirated foam directly to the annular seal area of Open Top Floating Roof storage tanks and Covered Floating Roof storage tanks for fire extinguishment or vapor suppression. Fully aspirated foam provides the most effective performance for all types of foam concentrates, resulting in quick, efficient control of an incident while it is still confined to the seal area. SPS-9 foam makers are classified as Type II discharge devices in accordance with NFPA Standard 11, and deliver low expansion foam directly onto the fuel surface with a minimum of foam submergence and fuel agitation. Minimizing submergence and agitation increases the effectiveness of the foam blanket, resulting in more efficient operation and superior extinguishing capabilities. Fixed discharge outlets have the added advantage of directing the entire flow into the seal area regardless of weather conditions for the most effective utilization of foam resources. Fixed Seal Protection Systems have a long history of prompt and safe extinguishment, with many incidents controlled so efficiently, that they are often not reported outside the confines of the facility. The SPS-9 is designed for easy, low cost installation on the top angle of Open Top Floating Roof storage tanks with existing wind shields. In addition, they may be used on Covered Floating Roof storage tanks that are not vapor tight above the internal floating roof (vented to atmosphere).

SPS-9 FOAM MAKER WITH WINDSHIELD & INTEGRAL DEFLECTOR

SPS-9FR FOAM OUTLET WITH DEFLECTOR The SPS-9FR foam outlet when used with an MBS type foam maker, is designed to deliver fully aspirated foam directly to the annular seal area of Open Top Floating Roof storage tanks and Covered Floating Roof storage tanks for fire extinguishment. SPS-9FR foam outlets are classified as Type II discharge devices in accordance with NFPA Standard 11, and deliver low expansion foam directly onto the fuel surface with a minimum of foam submergence and fuel agitation. Fixed discharge outlets have the added advantage of directing the entire flow into the seal area regardless of weather conditions for the most effective utilization of foam resources. Fixed Seal Protection Systems have a long history of prompt, and safe extinguishment, with many incidents controlled so efficiently, that they are often not reported outside the confines of the facility. The SPS9FR is designed for easy, low cost installation on the top angle of Open Top Floating Roof storage tanks with existing wind shields. In addition they may be used on Covered Floating Roof storage tanks which are not vapor tight above the internal floating roof (vented to atmosphere). The foam makers can be supplied from a fixed foam proportioning system or from portable foam proportioning equipment, such as, mobile fire apparatus. Installation should be made in accordance with applicable codes and standards. The SPS-9 Foam Outlet allows proper operation of the foam produced in the MBS type foam maker. The aerated foam solution is discharged against the deflector assembly which causes the foam to slide gently down the tank wall into the seal area.

MBS-3SA & MBS-9SA TYPE 2 FOAM MAKERS The MBS-3SA and MBS-9SA foam makers are designed to deliver fully aspirated foam for fire extinguishment directly to the hazard area, using all types of low expansion foam concentrates. Fully aspirated foam provides the most effective performance for all types of foam concentrates, resulting in quick, efficient control of an incident. The MBS-3SA and MBS-9SA foam makers are designed for easy, low cost installation on Floating Roof storage tanks and on Covered Floating Roof storage tanks which are not vapor tight above the internal floating roof (vented to atmosphere). They are often used for dike protection in the event of a product spill. MBS-9SA foam makers are compatible with all types of foam concentrate; protein, fluoroprotein, AFFF, and AR-AFFF. The foam makers can be supplied from a fixed foam proportioning system or from portable foam proportioning equipment, such as, mobile fire apparatus. In addition to the above applications, this type of foam maker is often used in marine applications. They can be used for protection of specific areas and under docks. They are Coast Guard approved for shipboard protection of machinery spaces and MBS-3SA TYPE 2 cargo pump rooms. MBS-9SA TYPE 2 FOAM MAKERS FOAM MAKERS

8 8 8 - 4 4 8 - 2 5 2 2 â&#x20AC;˘ w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S FOAM CHAMBERS & MAKERS

PHB TYPE HIGH BACK PRESSURE FOAM MAKERS The PHB Type High Back Pressure foam maker is designed to deliver fully aspirated foam for fire extinguishment through the product, directly onto the fuel surface. Fully aspirated foam provides the most effective performance, resulting in quick, efficient control of an incident. PHB Type High Back Pressure foam makers are classified as Type II discharge devices in accordance with NFPA Standard 11. When used with properly expanded, fluoroprotein type, low expansion foam, these foam makers can provide application of the foam through the product directly onto the fuel surface with a minimum of fuel pick-up and saturation of the foam bubble. Using PHB Type High Back Pressure foam makers with fixed discharge outlets has the added advantage of directing the entire flow to the hazard area, regardless of weather conditions, for the most effective utilization of foam resources. The PHB Type High Back Pressure foam maker produces foam by introducing air into the foam solution stream. The solution inlet of the foam maker is fitted with a factory installed orifice, designed to control the flow rate and create a reduced pressure area to draw air into the foam solution stream. Air is drawn into the foam solution through an air inlet hole located on the foam maker. To prevent obstruction, the air inlet is protected with an air inlet strainer with a stainless steel screen. A turbulator tube aids in the mixing of the air into the foam solution to provide the proper foam expansion. The aerated foam is discharged directly into the product at the base of the tank or the product supply pipeline to the tank. The PHB Type High Back Pressure foam maker is designed for easy, low cost installation on Cone Roof storage tanks. The foam maker can be installed for injection of the foam directly into the base of the product storage tank(s) or for injection into the oroduct pipeline supplying the tank(s). PHB foam makers can be located a greater distance from the hazard than most other types of foam makers because of its efficient design, which allows it to effectively operate against back pressures of up to 40% of the inlet pressure. In addition to subsurface injection to cone roof tanks, PHB foam makers are often used for dike protection in the event of a product spill. The PHB foam maker is also suitable for use in marine applications for protection of specific areas and under docks. Applications where existing discharge devices, that do not incorporate foam makers, can also be supplied with expanded foam using PHB Type High Back Pressure foam makers. The foam makers can be supplied from a fixed foam proportioning system or from portable foam proportioning equipment, such as, mobile fire apparatus. The foam makers can be furnished in a portable configuration for applications using mobile fire apparatus. Installation shall be made in accordance with applicable codes and standards. For applications using sub-surface injection, fluoroprotein type foam concentrates must be used. For all other applications they are compatible with all types of foam concentrate; protein, fluoroprotein, AFFF, and AR-AFFF. PHB-10A TO PHB-30A FOAM MAKERS

PHB-35A TO PHB-60A FOAM MAKERS

PHB-35SS TO PHB-60SS FOAM MAKERS

PHB-65B TO PHB-100B FOAM MAKERS

RUPTURE DISC SUBSURFACE INJECTION National Foam rupture discs are designed for sub-surface applications where expanded foam is injected into the product, either at the base of a product storage tank or through the pipeline supplying product to the tank. Foam lines are normally open to atmosphere and require a positive barrier to prevent product from entering the foam supply line. The check valves normally installed in the foam supply line cannot assure a positive barrier against product leakage into the foam line. Product leakage into the foam line may result in a product spill outside the dike area. Installation of the rupture disk insures a positive method to prevent leakage into the foam line. FEATURES • Easy installation even on existing tanks. • Assures positive shutoff of foam line. • Ease of maintenance. APPLICATIONS • Foam systems using sub-surface injection for application of expanded foam.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S F O A M C O N C E N T R AT E T R A N S F E R & N U R S I N G E Q U I P M E N T

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

D E L I V E RY S YS T E M S / F OA M S FOAM TYPES

The following foam concentrates are the most commonly used today by firefighters: • Aqueous Film Forming Foam (AFFF) • Alcohol-Resistant Aqueous Film Forming Foam (AR-AFFF) • Protein Foam • Fluoroprotein Foam

Also Available: • Coast Guard Approved Foam • Military Spec. Foam • Class A Foam • Vapor Suppression Foam • Freeze Protected Foam • Training Foam • Compliant Foam Testing

C L A S S “A” F I R E A fire in combustible fuel, such as wood and paper, where the cooling effect of water is of first importance in extinguishment.

CLASS “B” FIRE A fire involving a flammable liquid, where blanketing or smothering effect is of first importance.

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

LARGE DIAMETER HOSE & ACCESSORIES

Industrial fire fighting imposes unique requirements for equipment. It is mandatory that the hose be designed specifically for industrial fire fighting. In order to meet these unique needs, the finished product shall be abrasion, heat and kink resistant. Hose should be evaluated in accordance with the principles and practices listed in the National Fire Protection Association Standard 1061 (1997 edition) and related standards. Hose 1-3/4” up to 12” • General Purpose • Rubber Covered • Woven Fire Hose • Single Jacket/Double Jacket in a variety of colors

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

HOSE & ACCESSORIES HOSE REEL WITH FOAM EDUCTOR

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

LARGE DIAMETER HOSE & ACCESSORIES THE ROOKIE SIDEKICK ALL-IN-ONE Take the grunt work out of hose management and testing with The Rookie SideKick All-InOne. Our fully portable power hose roller does more work in less time and reduces wear and tear on your most valuable asset - your people. Prevent just one injury and it’s paid for itself. Time and cost savings on annual hose testing alone can pay back your investment. Use it once and you’ll understand why The Rookie SideKick is changing the way industrial, municipal and wildland firefighters work throughout the U.S. and Canada. (adjusts to roll any size fire hose up to 7-1/4 inch)

8 8 8 - 4 4 8 - 2 5 2 2 • w w w. T r a i n i n g S p e c s . c o m

TSI/Godwin Pumps specializes in Dri-Prime速 fully automatic self-priming pumps for sales and rentals. Used in temporary and permanent applications, the TSI/Godwin Dri-Prime速 features priming to 28 feet, dry running capabilities, solids handling and high discharge heads. Electric and hydraulic submersible pumps also are available. In addition, TSI/Godwin Pumps supplies a full range of diesel and electric Fire Pumps to LPC, NFPA and UL/FM rules and regulations, including Jockey pumps, controllers and after sales service. TSI/Godwin also manufactures, rents and sells portable light towers with four 1000-watt metal halide lights, covering 5 to 7 acres, and portable generators from 20 KW to 350 KW.

Rental Pumps & Accessories Godwin Pumps maintains a complete range of rental pumps and accessories. All ready for immediate dispatch and backed by the technical expertise and reliable 24hour service that means Godwin Pumps.

Light Towers Portable, tough and highly reliable with 30 foot tall, 360 degree rotating steel masts. Four 1000-watt metal halide lights cover 5 to 7 acres. Standard 4 point outrigger stance is capable of withstanding 65 mph winds. Godwin Light Towers are easy to use; engineered for on person setup and breakdown.

Generators 20 KW to 350 KW diesel powered generators that provide quiet, efficient portable power sources mounted on highway trailers for greater mobility. Perfect for remote construction job sites requiring electric power for a variety of needs.

Sub-Prime Electric Submersible Pumps