4 minute read
PRODUCT SHOWCASE
PRODUCTSHOWCASE
WANT TO BE FEATURED?
Send your latest product information to editorial@indmacdig.com
IMD's Monthly Product Showcase features the latest from some of the manufacturing industry's top suppliers.
See Live, Working Demonstrations at Fabtech 2021 for Scotchman Cold Saws, Ironworkers, Pipe Notchers, and Hydraulic Presses
Scotchman will perform live product demonstrations continuously throughout all four days of the show featuring the benefits of the latest equipment for general to heavy-duty metal fabrication. The CPO 350 AutoLoader circular cold saw with new, Clear Awareness Barrier with safety interlock switch provides extra safety for sawing while allowing the operator to visually monitor the saw in-action. Don’t miss seeing the Scotchman 5014-ET Ironworker, the world’s first and only 50-ton hydraulic ironworker with a 3-station turret.
» For more information, visit www.scotchman.com
char-lynn
hydraulic products
low speed high-torque
motors… The Char-Lynn motor range consists of three major types based on the valving used to distribute fluid through the Orbit gear set (geroler or gerotor), Spool Valve, Disc Valve and VIS (Valve-in-Star). A variety of displacement sizes are available in each of the three motor types to provide a wide range of speeds and torques.
gear pumps… Eaton Series 26 gear pumps with 13-tooth gears minimizes flow ripple to reduce noise and vibration. Bearing lubrication system uses inlet oil rather than high pressure oil, improving volumetric efficiency and power output. The 13 available displacements and many mounting configurations provide for an easy retrofit. Other series available.
steering control units… offer these advantages:
• Minimal steering linkage reduces cost, provides design flexibility. • Complete isolation of load forces from the control station. • Continuous, unlimited control action with low output torque. • Wide selection of control circuits and meter sizes. • Works with many kinds of power steering pumps or fluid supply.
7355 N. Lawndale Ave., PO Box 6, Skokie, IL 60076 Phone: 847-676-2910 Fax: 847-676-0365 Suhner Technology at An Affordable Price - MADE IN AMERICA
Suhner introduces the ECONOmaster® line of drilling units, affordably priced at under $3000 for the basic unit, in stock for immediate delivery or customizable to suit the particular operation. This economical solution is ideal for multiple materials such as light metal, wood, composite, plastic and foam. Because these units are entirely produced at the Suhner factory in Rome, Georgia, response times for delivery and customized construction are minimal, according to Division Manager Lee Coleman. “We recognized the need to bring our global technology to a local level, here in America, and the ECONOmaster® is a key step in that process.”
COXREELS® Exceeds Industry Recommended Salt Spray Testing Hours
Due to its numerous properties and, specifically, its corrosion resistance, powder coating is used for many applications in the industrial sector. The salt spray test is the oldest corrosion resistance test and the most widely preferred to evaluate anti-corrosion coatings. COXREELS is proud to announce that they recently exceeded 20% more hours than the recommended industry standard for salt spray testing. The independent lab test performed measured the corrosion and UV resistance of COXREELS’ powder coated materials and results indicated that COXREELS’ products ranked in the top tier of the grading system for both UV and corrosion resistance.
» For further information, visit www.COXREELS.com
Caldwell Beam Completes Automated Lifting System
Illinois Electric Works oversaw installation of a 2-ton capacity monorail crane system at a heavy truck manufacturer, featuring a 1-ton capacity twin-hook Caldwell lifting beam.
The end user sought a material handling solution for separating frame rails in preparation for its assembly line process. Handling Systems International (HSI), led the engineering phase of the project, while Electrolift designed a 2-ton capacity twin-hook hoist with a rigid (lug) mount to the beam. The final piece of the system was the all-important 353-in.-long beam that holds the magnets that are used to lift the material. Align Production Systems was the integrator that built everything around the system. KHK USA Inc. Announces Extensive Line of Metric Internal Ring Gears
Internal gears, also known as Ring gears, are cylindrical disks which have involute shaped teeth cut into their interior face. KHK internal ring gears are offered in carbon steel. All KHK internal ring gears allow for secondary operations such as adding through or tapped holes in the face. KHK’s quick customized products can be ready within 5 business days. KHK Steel Internal Gears (SI), are a low-cost option that is suitable for many applications. KHK Steel Ring Gears (SIR) are larger in size and number of teeth and can be cut to make segment gears and corner racks.
» For more information, visit www.khkgears.us
C-FRAME PRESSES
• Heavy Gauge Steel Design • Press Bed bolted on, not welded, to prevent distortion. • Large press bed to accommodate a variety of tooling other than just punching. • Pump, motor, valve and reservoir are all easily accessible for maintenance. • Large rectangular tubes used at base of machine to give safe, instant portability.
HYDRAULIC MACHINES OF IOWA
A Division of Betenbender Mfg. Inc
