DATASHEET
G7-V24-PRO 2
1 3
Programmable V24-Card G7-V24-PRO Using the G7-V24-PRO adaptation of external protocols to our standard protocol can be made with ease. Thanks to the G7-V24-PRO the intercom system based on the system central as Intercom Server can communicate with external systems with ease, e.g. with video switchers, pager systems or mobile two-way radio. The programming is 1.
G7-V24-PRO Programmable V24-card with two RS 232, of which one can be configured as RS 422.
2.
GEAV 700 Installation board for interface card G7-V24-PRO with two 9-way D-Submin plugs for RS232 and plugable screwterminals for RS 422.
done with an easy to use terminal program. For developing applications a System Developer Kit is available. The programming language used for programming the V24-PRO is a very powerful “Basic“, which simplifies the creation of applications. For certain applications loadable driver modules are available. 3.
SDK-V24 System Developer Kit for programming of own applications, like e.g. adaptation of external protocols.
Commend, Inc. · 63 Ramapo Valley Road, Suite 201 · Mahwah, New Jersey 07430 · Tel. (201) 529-2425 · Fax (201) 529-0008 · office@commendusa.com · www.commendusa.com Datasheet Version 1.1/1207 | Errors and omissions excepted | Products may change in the interest of technical improvements without notice.
www.commend.com
P1|3
DATASHEET
G7-V24-PRO
Technical Data – Benefits TECHNICAL DATA
BENEFITS
Operating temperature range:
0°C to +50°C (32° F to 122° F)
Storage temperature range:
–30°C to +60°C (–22° F to 140° F)
Relative humidity:
20% to 80%
Power supply:
from central
Emergency power consumption:
35 mAh/h
Baud rate: Word length / parity / stopbits: Protocolls:
Measurements:
• Equipped with two RS 232 interfaces, of which one can be configured as RS 422 • Includes a powerful, multitasking capable basic computer • Endowed with a real-time clock, to be synchronized via DCF 77
7-8 / E, 0, N / 1-2
• Applications can be programmed without having to modify the operating system of the system centrals
isolated from the system 100 x 167 mm (3.94 x 6.58 in)
Weight including package:
• Suitable for Intercom Servers GE 700 and GE 200 (for GE 200 an interface housing GEI 200 is required)
300 - 19200 Baud
programmable with developer kit SDK-V24
RS 422 interface:
• Programmable V24-interface card in euro-card format
250 g (0.55 lbs)
SYSTEM REQUIREMENTS GE 200 • Central software min Pro 04.7D, for programming the corresponding configuration tool (minimum TE 700 version 4.7D) is required. • For a central GE 200 an interface housing GEI 200 is required. GE 700 • Central software min Pro 04.7D, for programming the corresponding configuration tool (minimum TE 700 version 4.7D) is required.
• Easy configuration of the applications via terminal program • Loadable driver modules for certain applications available on request • System Development Kit available for local programming of applications • Application examples: - Conversion of protocols for video switchers, pager systems or two-way radio - Adjustment of pan- / tilt-control of video systems - Day- / night switching for control desks depending on time of day - Sluice-control - Volume control depending on call type or calling station (e.g. higher volume at emergency calls)
Attention: The card will only function with drivers available separately! Individual drivers can be programmed with the System Development Kit SDK-V24.
EXTENT OF SUPPLY G7-V24-PRO: • Programmable V24-Card G7-V24-PRO • Installation board GEAV 700 • Short reference System development kit SDK-V24: • Programmable V24-Card G7-V24-PRO • Installation board GEAV 700 • Short reference • Basic Tiger Software • Diagnostic display • Connection cable • 1 day training (obligatory)
Commend, Inc. · 63 Ramapo Valley Road, Suite 201 · Mahwah, New Jersey 07430 · Tel. (201) 529-2425 · Fax (201) 529-0008 · office@commendusa.com · www.commendusa.com Datasheet Version 1.1/1207 | Errors and omissions excepted | Products may change in the interest of technical improvements without notice.
www.commend.com
P2|3
DATASHEET
G7-V24-PRO
Installation PRECAUTIONS
CONNECTION DIAGRAM GEAV 700
• ESD precautions must be observed. • Cards may be exchanged only with voltage switched off. • Mounting and installation of the centrals and of the equipment may be carried out by authorised service personnel only.
1 2
RS 232 No. 1
1....GND (Shield) 2....TXD 3....RXD 4....NC 5....GND 6....RTS 7....CTS 8....RTS 9....NC
6 7
3
8
4
9
5
INSTALLATION
T
GND (Shield)
GEAV 700
T
can be used instead of RS 232 No. 1
T/R
• In a central GE 200 the card can be installed in the slots 9 or 10 of the central (interface housing GEI 200 required, a maximum of 2 cards).
RS 422
T/R
• In a central GE 700 the card can be installed in the slots 1-12, A or B of the central (a maximum of four V24-cards per housing).
RS 232 No. 2
GND
• For connection of the G7-V24-PRO the installation board GEAV 700 must be used.
RS 422
The required cable depends on the application of the card.
Commend, Inc. · 63 Ramapo Valley Road, Suite 201 · Mahwah, New Jersey 07430 · Tel. (201) 529-2425 · Fax (201) 529-0008 · office@commendusa.com · www.commendusa.com Datasheet Version 1.1/1207 | Errors and omissions excepted | Products may change in the interest of technical improvements without notice.
www.commend.com
P3|3