http://www.sourceav.com/Files/Kantech/3_-_Product_Information/DS_Legacy_ioProx_Readers_1208_EN_L

Proximity Readers • XSF or Wiegand 26-bit format • Up to 1000 ft. (300 m) unshielded cable • Up to 29 in. (73 cm) read range (P600) • Indoor / outdoor use • Integrated piezo & bi-color LED • Integrated Tamper Switch on P600 (optional on other models) • Optional Command buttons

P100

P200 with optional command buttons P300 P400 with optional command buttons

P600 Actual size of P600 is 11.25 x 11.25 x 1.25 (HWD in.) P555KP

Proximity Readers The ioProx reader electronics are vandal and weather resistant, and are encapsulated in epoxy (except the P600 which is sealed with a rubber gasket). All readers have an integrated piezo buzzer and bicolor LED indicating system/reader status. Optional tamper switch and user input modules are available.

Easy installation

Integrated Command Buttons (P200/P400)

The ioProx reader's small size provides flexibility for mounting; they can be installed on walls, door mullions, or single and double gang boxes.

An optional integrated command button module can be added to the P200 and P400 models. The two buttons are form C contacts that can be used to perform different functions such as arming/disarming an alarm panel, serving as a door bell when connected to a buzzer, etc.

Voltage Requirements Depending on the model selected, power requirements range 5 to 14 VDC or 12 to 28 VDC (P600), for compability with virtually any controller on the market. This allows a system to be upgraded simply by changing readers and cards, without rewiring

Unshielded Cable The ioProx readers can be installed using unshielded cable to a distance of up to 1000 ft. (300 m) from the controller. Using this type of cable significantly reduces installation costs.

Integrated 12-Touch Keypad The P555 provides an ideal method of increasing security by combining reader and keypad while keeping the cost down. Since the keypad data is transmitted on the same wires as reader data, an existing reader only installation can be easily upgraded by replacing the reader with a P555KP reader with integrated keypad. There is no need to pull additional cabling. The keypad output is based on industry standard 8-bit burst format.

XSF Security XSF (eXtended Secure Format) readers are compatible only with Kantech software, with access to over 137 billion unique codes. Kantech's XSF cards provide increased security and absolute guarantee against card duplication.

P10SHL Standard shell card

P20DYE Due-Sub card

Ordering Information Readers XSF format: (for Kantech software only)

P100XSF, P200XSF, P300XSF, P400XSF, P555KPXSF & P600 (selectable)

Readers Wiegand 26-bit format:

P100W26, P200W26, P300W26, P400W26, P555KPW26 & P600 (selectable)

Compatible proximity cards: P10SHL, P20DYE, P30DMG, P40KEY & (dual encoded XSF & Wiegand 26-bit format) P50TAG P30DMG Due-Sub card with Mag Stripe

P40KEY Keytag

P50TAG ioProx selfadhesive Tag

Optional Parts:

P-BUTN/200, P-BUTN/400 & P-TAMP

Technical Specifications P100

P200

P300

P555KP

P600

Typical read range Input voltage Current DC maximum Dimensions (HWD) in. Dimensions (HWD) mm Weight Color Transmit frequency LED indicator Piezo buzzer Operating temperature (F) Operating temperature (C) Reader Format

up to 4 “ (10 cm)

up to 5” (12.5cm)

up to 5.5” (14cm)

up to 6” (15cm)

P400

up to 4.5” (11.4cm)

up to 29” (73cm)

5 to 14VDC

12 to 28VDC

85mA

1A

2.75 x 1.75 x 0.7

4.50 x 1.75 x 0.7

4.50 x 2.75 x 0.7

4.50 x 4.50 x 0.7

4.39 x 2.97 x 0.90

11.25 x 11.25 x 1.25

70 x 44 x 17.8

114.5 x 44 x 17.8

114.5 x 70 x 17.8

114.5 x 114.5 x 17.8

111.5 x 75 x 23

285 x 285 x 31.5

1.37oz (39g)

1.83oz (52g)

2.92oz (83g)

3.94oz (112g)

4.8oz (135g)

38.27oz (1085g)

Black

125 kHz

Bicolor (red,green)

Integrated

-300 F to 1500 F

-350 C to 650 C

XSF or Wiegand 26-bit

XSF or Wiegand 26-bit selectable

Keypad Format Maximum distance from controller: 5VDC: 12VDC: 28VDC: Cable Types

N/A

8-bit burst

N/A

500ft (150m) 1000ft (300m) -------------

------------500ft (150m) 1000ft (300m)

3 twisted pairs, solid conductor #22AWG UNSHIELDED Belden ref #8742

#18AWG UNSHIELDED, Belden 5304UE

Command buttons (optional) Tamper switch (optional) Certifications

N/A

P-BUTN/200

N/A

P-BUTN/400

N/A

P-TAMP

N/A

Integrated

FCC, CE & UL

FCC, CE

FCC, CE & UL

Tel: 1-450-444-2040 Fax: 1-450-444-2029 Toll free: 1-888-KANTECH (1-888-526-8324) www.kantech.com

Product specifications and availability subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.

N/A

Item # 21807

Turn static files into dynamic content formats.

Create a flipbook