#061802
®
5410 Newport Drive, Suite #24 Rolling Meadows, Illinois 60008 (800) 528-4343 • (847) 259-8900 • FAX (847) 259-1300 E-mail: info@nitek.net • Internet: www.nitek.net
Northern Information Technology Inc.
NITEK
DISTRIBUTED BY
Northern Information Technology, Inc.
Video and Data transmission systems from 10 feet to 10 miles
TM
www.nitek.net VB37 / VB39
VB37F / VB39F
Twisted Pair Video Systems
• Quality video over ordinary twisted pair cables • No power required for up to 1000 feet • Complete immunity to noise and interference • Lifetime Warranty • Transmits “up-the-coax” P/T/Z control & video over a single twisted pair • M-version mounts directly on camera
Applications up to 1,000 feet (750 feet when used with DVR equipment)
Applications up to 1,000 feet (750 feet when used with DVR equipment)
BNC Connector Type
Female
Male
Size
1.3"H x 2.0"W x .95"D
1.3"H x 2.0"W x .95"D
Power Requirements
NONE REQUIRED
NONE REQUIRED
Video Format
RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB typical
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Surge Supression
Built-in – VB39F only
Built-in – VB39M only
TS515 / TS560
TS515
• Active electronics compensate for frequency loss • Built-in protection from power surge and transients • Complete immunity to ground loop • Video can run in same raceway with telephone and computer signals • Easy adjustment for optimum performance
Recommended Transmission Distance Systems Include
Applications from 100 to 3,000 feet
VB37F transmitter, receiver unit and 12 VDC wall transformer Transmitter 1.3"H x 2.0"W x .95"D Receiver 1.6"H x 4.3"W x 2.4"D None required for transmitter Receiver powered by 12VDC wall transformer RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
VB37F transmitter, receiver unit and 12 VDC wall transformer Transmitter 1.3"H x 2.0"W x .95"D Receiver 1.6"H x 4.3"W x 2.4"D None required for transmitter Receiver powered by 12VDC wall transformer RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB typical
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Recommended Transmission Distance Systems Include
Applications 500 to 6,000 feet
Size Power Requirements Video Format
EX560 Transmitter and receiver Wall transformer included 1.6"H x 4.3"W x 2.4"D (transmitter and receiver; each)
Power Requirements
12 - 24 VDC or VAC
12 to 24 VAC or VDC
Video Format
RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB typical
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Size
RB102/RB104 Rack Panel Wall Bracket Used to mount RK115 Panels. One side is hinged to allow easy access to rear of Panels. Bracket Units mount to walls where rack space is not available.
Twiste Pair Video – Multi Channel Hubs
• Cost-effective way to mount multiple Baluns • Single rack height fits standard 19" rack • Holds up to 10 VB37M or VB39M Baluns • Video Baluns sold separately
Recommended Transmission Distance
Applications up to 1,000 feet (750 feet when used with DVR equipment)
BNC Connector Type
16 Female
Size
17"W x 5.5"D x 1.75"H (without mounting ears)
Power Requirements Video Format
NONE REQUIRED RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB Typical
Wire Type
UTP category 2, 3, 4 OR 5 AWG or heavier
VH1651
VH1651 Recommended Transmission Distance
Applications from 100 to 1,500 feet
BNC Connector Type
16 Female
Size
17"W x 5.5"D x 1.75"H (without mounting ears)
Power Requirements Video Format
Powered by 24VAC wall transformer RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB Typical
Wire Type
UTP category 2, 3, 4 OR 5 AWG or heavier
VH1656
• Switches adjust gain & equalization • Video detect LED’s
• RB102 Mounts (2) RK115 Panels; holds a total of (20) VB37M or VB39M Baluns. • RB104 Mounts (4) RK115 Panels; holds a total of (40) VB37M or VB39M Baluns.
VH1639
VH1639
• Switches adjust gain & equalization • Video detect LED’s
EX1120 Applications 1,000 to 12,000 feet B/W 1,000 to 9,000 feet color Transmitter and receiver Wall transformer included 1.6"H x 4.3"W x 2.4"D (transmitter and receiver; each)
RK115
• No power required • Transmits “up-the-coax” P/T/Z control and video over a single twisted pair
TS560
Applications from 100 to 1,500 feet
EX560 / EX1120 • Active electronics correct for frequency and level loss • Built-in protection from power surges and transients • Complete immunity to ground loop • Adjustment for optimum performance • Video can run in same raceway with telephone and computer signals
VB37M / VB39M
Recommended Transmission Distance
VH1656 Recommended Transmission Distance
Applications from 100 to 6,000 feet
BNC Connector Type
16 Female
Size
17"W x 5.5"D x 1.75"H (without mounting ears)
Power Requirements Video Format
Powered by 24VAC wall transformer RS170, NTSC, PAL, CCIR or SECAM (color or monochrome)
Common Mode Rejection
70 dB Typical
Wire Type
UTP category 2, 3, 4 OR 5 AWG or heavier
NOTE: Information given is for general references. For complete information refer to individual specification sheets.
VB41x4 • Provides high density video transmission in a compact space • Complete immunity to noise and interference • No power required for up to 1000 feet • Transmits “up-the-coax” P/T/Z control & video over a single twisted pair • Connection via R545 or push terminals • Video detection LEDs
VB41x4 Applications up to 1,000 feet (750 feet when used with DVR equipment)
Systems Include
VB41x4 Card with Baluns
Card Cage Size
For use with RK400 card slot
Power Requirements
NONE REQUIRED
Video Format
All Formats including RS170, NTSC, SECAM PAL and CCIR (color or monochrome)
Common Mode Rejection
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Surge Supression
Built-in
Recommended Transmission Distance Systems Include
Applications from 100 to 1,500 feet
Applications from 100 to 3,000 feet
TR515x4 card with (4) 515 receiver units and (4) VB37F units for use as transmitters For use with RK400 1 card slot None required for transmitter Receiver powered by card cage All Formats including RS170, NTSC, SECAM PAL and CCIR (color or monochrome)
TS560x4 card with (4) 560 receiver units and (4) VB37F units for use as transmitters For use with RK400 1 card slot None required for transmitter Receiver powered by card cage All Formats including RS170, NTSC, SECAM PAL and CCIR (color or monochrome)
Common Mode Rejection
70 dB typical
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Recommended Transmission Distance Systems Include
Applications 500 to 6,000 feet
TS515x4 / TS560x4 • 4 receivers per card • Video detection LEDs • Active electronics compensate for frequency loss • Built-in protection from power surges and transients • Complete immunity to ground loop • Easy adjustment for optimum performance • RJ45 or push terminal connection
TS515x4
Card Cage Size Power Requirements Video Format
EX560x4 / EX1120RR • Active electronics compensate for frequency and level loss • Built-in protection from power surges and transients • Complete immunity to ground loop; video and AC • Longest distance video transmission in industry • Video can run in same raceway with telephone and computer signals
EX560x4
TS560x4
EX1120RR
TR560x4 receiver card, (4) TT560 transmitter units and (4) power supplies For use with RK400 1 card slot Transmitter powered by 12 VDC wall transformer Receiver powered by card cage All Formats including RS170, NTSC, SECAM PAL and CCIR (color or monochrome)
Applications from 1,000 to 12,000 feet B/W 1,000 to 9,000 feet color EX1120RR receiver card (1) EX1120 transmitter unit and (1) power supply For use with RK400 1 card slot Transmitter powered by 24 VAC wall transformer. Receiver powered by card cage All Formats including RS170, NTSC, SECAM PAL and CCIR (color or monochrome)
Common Mode Rejection
70 dB typical
70 dB typical
Wire Type
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
UTP Category 2, 3, 4 or 5; 24 AWG or Heavier
Card Cage/ Size Power Requirements Video Format
DA422
Modular Card Cage Systems
Recommended Transmission Distance
RK400 “PAY AS YOU GROW”
• RS422 Data Signal Distribution Card - One in and four out • Sends RS422 Data up to 6,000 feet • Use when the RS422 signal must be distributed from point to multi-point or for repeating RS422 signals • Data connection via RJ45 or terminal strip. • Plugs into RK400 Rack • Use up to (2) DA422 per RK400 Rack
• Can hold any combination of the NITEK Modular Rack Cards • Expandable - Start with only a few Modular Rack Cards and add more later • High density - up to 40 inputs per card cage • Removable mounting brackets provide for rack mount or desktop use *All modular cards sold separately
DL1142 RS422 Line Driver Recommended Transmission Distance Systems Include
RS422 data transmission up to 12,000 feet DL1142 Line Driver unit and Power supply
Size
1.1"H x 2.6"W x 4.3"D
Data Format
RS422
Data Speed
64K Baud
Line Type
direct wire pair
Recommended Transmission Distance
RS232 data transmission up to 12,000 feet
Systems Include
Transmitter unit, Receiver unit and Power supplies
Size
1.1"H x 2.6"W x 4.3"D (transmitter and receiver; each)
Data Format
RS232
Data Speed
64K Baud
Line Type
direct wire pair
DL2105 RS232 Extender • EIA RS232 standard inputs and outputs • Built-in surge protection • Data speeds of up to 64K Baud • Balanced communication output can be run in the same cable with telephone, video and other computer signals
DL2120
DL2120/DL2130 Data Link • Can be used to extend remote operation of Splitters, Multiplexers and P/T/Z equipment • Sends RS422, RS232 or 4 wire RS485 data up to 19.2Kbps over 24 AWG wire • Operates Half Duplex over 2 wires or Full Duplex over 4 wires
Recommended Transmission Distance
Up to 4 miles over leased line or direct wire
Up to 10 miles over leased line or direct wire
Systems Include
(2) Transceivers with power supplies
(2) Transceivers with power supplies
Size
7"D x 6"W x 2"H (transmitter and receiver; each) Input data can be either RS422, RS232 or 4 wire RS485
7"D x 6"W x 2"H (transmitter and receiver; each) Input data can be either RS422, RS232 or 4 wire RS485
Data Speed
19.2K Baud
2400 Baud
Line Type
Leased line or direct wire pair
Leased line or direct wire pair
Data Format
VL6022/VL6024/VL6028
Recommended Transmission Distance
4 miles 7 miles 10 miles
4 miles 7 miles 10 miles
Systems Include
Transmitter, receiver and power supplies
Transmitter, receiver and power supplies
Size
1.5"H x 7.2"W x 7.5"D (transmitter and receiver; each) From 2 to 4 Full Fields/second
*U.S. Patent No. 6,111,595
Video Format
RS170 and NTSC monochrome
1.5"H x 7.2"W x 7.5"D / 1.5"H x 7.8"W x 11"D (transmitter / receiver) From .5 to 1.5 Full Fields/second (color) From 2 to 4 Full Fields/second (monochrome) RS170 or NTSC monochrome or color
Line Type
Leased line or direct wire pair
Leased line or direct wire pair
Update Rate
V-Link Systems
VL5022/VL5024/VL5028
*VL50XX/VL60XX • V-Link systems use a unique patented transmission method that is virtually immune to noise and interference • Ideal for extra large campus environments, airports and military bases
DL2130
Data Transmission Systems
• EIA RS422 standard inputs and outputs • Built-in surge protection • Data speeds of up to 64K Baud • Balanced communication output can be run in the same cable with telephone, video and other computer signals
The NITEK Video Balun line of Coax Eliminators enable high resolution color video to be sent over ordinary telephone cables or CAT5 wire. The unique balun design provides them with unmatched interference rejection. This means that the NITEK Coax Eliminators can transmit video in the same wire bundle with telephone, datacom or low voltage power circuits. They can also send video and control signals over a single twisted pair when used with any "up-the-coax" video and control system. NITEK Video Baluns save installation time and equipment cost, whether installing a new cable or using an existing cable.
Coax Eliminator
Camera/PTZ Unit
Over-the-Coax Transmitter/Controller
CAT 2, 3, 4 or 5 1,000 feet Max.
NITEK offers the broadest line of UTP video systems in the world. The Twisted Sender systems by NITEK, include a selection of active receivers and transmitters covering a range of 100 feet to over 2 miles (11,000 feet). The entire Twisted Sender line includes built-in surge protection, high immunity to extraneous noise and interference and is fully adjustable to provide maximum video quality over the entire operating range. This wide selection of UTP equipment gives you the best system for every application at the lowest price.
Twisted Sender
Receiver 3000 Feet of Twisted Pair
Transmitter
NITEK now offers a complete line of multi-channel Hub Systems covering a wide range of applications from 1,000 to 6,000 feet. The hubs mount in a standard 19" rack and can provide a cost-effective solution in high density CCTV systems where the plug in flexibility of the Modular Rack is not required.
Multi-Channel Hubs
Camera
Camera
Monitor
VB37
NITEK
R
TR560
RECEIVER
Camera
VB37
+
2
+
-
6
+
-
4
+
-
8
1
2
3
-
4
5
6
7
8
+
10 -
+
14 -
+
12 -
+
9
10
11
12
The Modular twisted pair video transmission system by NITEK was specifically designed with the integrator and installer in mind. It provides a unique combination of design flexibility and system expandability in a single cost-effective solution. A wide selection of plug-in modules provide the ability to link video cameras over ordinary twisted pair cables, from a few feet to as far as 12,000 feet (2.3 miles) away from the headend. High density of 40 video receivers per card cage makes it ideal for large installations. Only the units immediately needed for the application have to be purchased, modules can be added later as the system expands. With the NITEK Modular Systems you “Pay As You Grow�.
14
15
central security office
16
Modular Rack
warehouse
entry gate
parking lot
13
16 -
office area 1