Spaldings Agriculture Catalogue Update 2023

PLOUGH A

BESSON T8 & TA8 BODIES

To fit: LEMKEN To fit: KVERNELAND

No. 8, 9, 19, 28 & 30 BODIES

To fit: LEMKEN CD, C40, BS20, B25, B25H, B30, BS40 & W52 BODIES

FLATLIFT® V-RANGE LEG ASSEMBLY (2022 onwards)

SPL® Ultra Front Point FEATURES: 2 x Tungsten tiles fitted to point, protect against wear Hard faced on sides of tiled point, help maintain shape

Scrapers manufactured with HARDOX ® steel –which features a combination of hardness and toughness, making it both durable and crack resistant.

P05431, 822-277C

To fit : SUMO – TRIO ( Post 2007) to GLS POINT CONVERSION : SUMO – GLS / LDS

Point and Wing options to fit NEW conversion leg (12724):

To

fit:

SUMO – Trio (Post 2007) to GLS Point Conversion

To fit: SUMO – GLS / LDS Also fits AGRI-WELD / RYE TEC Restorer

To fit : SUMO – DISC and SCRAPER parts used on : TRIO / QUATRO / MIXIDISC

To fit: SUMO – Trio / Quatro / Mixidisc Disc and scraper parts

Spaldings parts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine parts.

Scraper manufactured with

TILLSO SABRE TINE PARTS

Full range of Tine Parts available to fit

This complete lower leg wing, point & shin frog allows for easier fitting, with a vertical face and a larger weld area to maintain critical wing angle. ALSO features Tungsten side wear plates for EXTRA protection.

SPALDINGS ARE THE EXCLUSIVE UK DISTRIBUTOR FOR GENUINE TILLSO PARTS

CULTIVATION

To fit: AMAZONE

To fit: BROWNS GRASSMASTER

To fit: STANDEN

To fit: DALBO

To fit: FARMET FANTOM

Spaldings parts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine parts.

To fit : SLY STRIPCAT II / HORIZON SPX

STRIP-TILL

SEED DRILL

Low disturbance seed opener, lower in draft to provide easy pulling

Note: Seed spread may vary depending on sweep size, soil type and fan speed.

To fit: CLAYDON – Hybrid Drill

To fit : CLAYDON – HYBRID DRILL

Hard-facing on seed tube

tips

To fit : DALE DRILLS – TINE DRILL

To fit : HORSCH – AVATAR

SPL® Ultra Seed Boot FEATURES:

SPL® Ultra Drill Tine FEATURES:

- 12mm Thick Boron @ 50 HRC

- Heavy duty shaped leading Tungsten tile

- 98mm working Tungsten height (OEM is 50mm)

- Extra bolt holes included to raise seed boot 1” after heavy wear on tine

To fit: DALE DRILLS – Tine Drill

N1 SPL® Ultra drill tine NEW

SPL® Ultra drill seed boot NEW

- 3.5mm Thick one-piece cast pipe @ 43–45 HRC (OEM Dale fabricated 4mm sheet steel @ 36 H

- 55mm high Tungsten on angle for leading edge

- Hardfacing to the rear to prevent wear on side

1 x M12 x 40mm HT coach bolt 12566 pk 10

SEED DRILL

To fit : GD DIRECT DRILL

To fit : SABRE TINE DRILL

M8 x 20mm C/Sunk Set Screw plus Loctite (GR10.9, DIN 7991) c/w Stover nut. Pack of 30.

To fit: WEAVING – GD Direct Drill

To fit: WEAVING – Sabre Tine Drill P5

Drill coulter tine with Tungsten NEW

To fit : VÄDERSTAD – SEED PLACEMENT

SPL® Ultra Drill Tine

FEATURES:

- 135mm Tungsten

- Heavy duty leading

- 12mm 50 HRC Boron base tine

- Tungsten to back edge, to stop wear from back to front

- 60 HRC Hard facing

- Tube Clamps, works with pinch bolts and linch pin

To fit: VÄDERSTAD – Seed Placement Q1

33 2

33 3

BALE WITH ULTIMATE STRENGTH

MAXXNET® BALE NETWRAP

Farmers and contractors value ultimate performance when baling. CordexAgri® Launches its latest and strongest Netwrap – MaxxNet®. MaxxNet always delivers perfectly covered high density round bales.

Features:

• Manufactured without limitations

• ID Technology

• Ultimate strength

• Full S2S ® – side to side coverage

• Guaranteed minimum length

HIGH PERFORMANCE WEARING PARTS

Benefit from:

- PREMIUM QUALITY

- PERFECT BALE COVERAGE

- HIGH VISIBILITY

- MAXIMUM STRENGTH

• Maximum UV protection

• 50m end of roll red warning stripe

• Reusable handles

• Left / Right direction indication

• Suitable for all makes and models of round baler machines

19969 MAXXNET® Netwrap. 1.23m x 3,800m per roll. Single Roll.

P C&

2 SINGLE-PHASE 1.5 hp (1.1

GRAIN COLUMN FAN ( with 200 mm INLET)

Suction outlet fan with 230V single phase motor, to suit 200mm diameter grain column tubes.

40286 1.5 hp (1.1kW) column fan, 230 volt, single phase. 1,000 cfm max. (for 200mm pipe).

CROP SPRAYING IRRIGATION

SPRAY NOZZLES

Pentair Hypro 3D nozzles outperform a flat-fan nozzle by 10 percent for pre-emergence blackgrass control in Syngenta field trials*

PENTAIR HYPRO 3D NINETY SPRAY NOZZLES

• Out-performs flat-fan in pre-emerge weed control at multiple boom heights

• Delivers improved efficiency and reduced water volume without compromising weed control

• 60–75% drift reduction compared to flat-fan nozzles, achieving 2 Star LERAP rating at specific nozzle size/ pressure combinations

• Increased spray deposition from an alternating inclined spray by 8 per cent on a one-leaf artificial target versus a flat-fan spraying straight down (internal Hypro wind tunnel trials)

• Engineered to create consistent droplet sizes to hit the target, rather than the flat-fan nozzle’s droplets which can cause off-target trespass

19883 Hypro 3d Ninety 05 Brown (FC-3DN90-05).

19884 Hypro 3d Ninety 06 Grey (FC-3DN90-06).

19886 Hypro 3d Ninety 08 White (FC-3DN90-08).

3 CAM LOCK COUPLINGS

Designed to provide a fast, simple way to connect and disconnect large diameter pipes and hoses. Commonly used in agricultural spraying because they increase the speed with which tanks can be filled and refilled. Strong designed, made for every application including heavy duty industrial use.

• Easy use • Excellent sealing

• Made of Polyethylene• Designed for long life

19409 2” Female cam lock with 2”female BSP thread.

19408 2” Male cam lock with 2” female BSP thread.

19404 2” Male cam lock with 2” hose tail.

19399 2” Male BSP to 3” female BSP threaded adaptor.

19414 3” Male cam lock with 3” hose tail.

19418 3” Male cam lock with 3” female BSP thread.

19415 3” Cam lock coupler seal.

19416 3” Male cam lock lock plug.

3D NINETY NOZZLES

*Proven to deliver up to a 10% increase in pre-emerge weed control compared to a conventional flat fan (Syngenta UK Trials – 0.6 l/ha Liberator (diflufenican+flufenacet) + 4 l/ha Defy (Prosulfacarb) applied November 2015).

CAM LOCK COUPLINGS

IRE HOSE COUPLER

GALVANISED HOSE COUPLINGS

BAUER TYPE (NON-GENUINE)

4 4" CLOSURE RING

BAUER TYPE (Non-Genuine) galvanised coupling. 28371 4” Closure ring. Length: 41mm.

Dimensions: A = 191mm. B = 41mm.

C = 130mm.

5 4" MALE CONNECTOR c/w CLOSURE RING

BAUER TYPE (Non-Genuine) galvanised coupling. 28377 4” Male connector with hose tail, complete with closure ring. Length: 332mm.

Dimensions: A = 145mm. B = 112mm.

C = 332mm. D = 102mm.

2 2¼ " FEMALE INSTANTANEOUS COUPLER (FIRE HOSE)

Enable fire engines to connect to farm water supply. Female instantaneous aluminium fire hose coupling quick release, BSP thread to BS336. Use with suitable cam lock fittings.

19425 2 ¼ ” Female instantaneous coupler (Fire Hose) to 2”female BSP thread.

6 4" FEMALE CONNECTOR, c/w GASKET

RING

BAUER TYPE (Non-Genuine) galvanised coupling. 28380 4” Female connector with hose tail and gasket ring. Length: 283mm.

Dimensions: A = 167mm. B = 146mm.

C = 283mm. D = 102mm.

PADAGAS SWEEPERS

ROTARY SWEEPERS

SWEEPING WIDTH: 2.5m

HYDRAULIC ROTARY SWEEPER

PADAGAS FOX H-250

2.5 m ROTARY SWEEPER

The Fox H-250 is suitable for a wide range of sweeping applications. Recommended for front or rear mounting, and particularly suitable for use with low power tractors. The Fox H-250 features a Floating Head to follow ground contours, with manual mechanical angle adjustment. It’s Universal Headstock allows a choice of bolt-on mounting options for telehandler or 3-point linkage, to suit your application (see R.H. column).

• Hydraulic sweeper, 2.5m working width

• With 600mm brush diameter (convoluted)

• Solid support wheels and parking legs

• Manual 20° left/right angle adjustment

Supplied with 1 year manufacturers’ warranty

SPECIFICATION:

Total width 2,793mm

Working width / angled 2,445mm / 2,235mm

Mechanical angling 20°

Weight with bracket 430kg

Brush dia. / No. of sections 600mm / 27 sections

Drive 1x hydraulic motor

Minimum oil flow @ 120 bar 25 ltr/min

Recommended oil flow @ 140 bar 30 ltr/min

Maximum oil flow @ 175 bar 60 ltr/min

FEATURES: Floating linkage to follow contours of the ground

Bolt-on

options available to suit your application

BOLT-ON QUICK HITCH BRACKET

KITS for PADAGAS

Please order the required bracket kit to suit your application when ordering your Padagas sweeper. Suitable for use with current Padagas Fox H-250, PI-25, Shark-250H, Shark-300H and Profi H-2501 models.

15370 JCB Quick Hitch bracket kit (for Padagas).

15371 Merlo Quick Hitch bracket kit (for Padagas).

15372 Manitou Quick Hitch bracket kit (for Padagas).

15373 Euro Quick Hitch bracket kit (for Padagas).

15374 John Deere/Matbro Quick Hitch bracket kit (for Padagas).

16500 3-Point linkage bracket kit (for Padagas).

15370

PADAGAS SWEEPERS

16534 Extended bolt-on 3-point linkage cat 2 / 1, for Padagas PROFI H only.

16535 Cat 2 /1 upper link pin (for Padagas 3-point linkage brackets: 16500 & 16534).

16536

Cat 2 /1 lower link pin (for Padagas 3-point linkage brackets: 16500 & 16534).

16507 Solenoid cable c/w solenoid, switch and 12v DC plug.

15358 Fox H-250 2.5m Rotary Sweeper with manual angle adjustment (requires bolt-on hitch bracket kit to suit your application).

15361 Repl. 600mm diameter poly sweeper brush.

16504 Repl. 600mm diameter steel sweeper brush.

15372

15374

16500

FOX H-250

mounting

1. 25 m THJ-125 FOR 10– 16 TONNE EXCAVATORS

1

TMC CANCELA THJ-125 HYDRAULIC MULCHER

• Body built in high strength steel

• Double Chain curtain for front protection

• Hydraulic hood with replaceable counterblades for improving material entrance

• Side step system on body of frame sides

• Rotor fitted with fixed hammers in a helical disposition

• Transmission with 5 XPB belts

• Hydraulic piston motor drive Bosch Rexroth with adjustable displacement (40–63cc) and built-in anticavitation valve

• Water resistant sliding skids with replaceable soles

• Centralised hydraulic outputs and grease points

• Flange with coupling for excavator (optional)

17366 THJ-125 hydraulic mulcher (coupling options available)*.

TLE-125 FOR REMOTE CONTROLLED UNITS (60–120 Ltr/min )

1. 25 m

TMC CANCELA TLE-125 HYDRAULIC MULCHER

• Body built in high strength steel

• 4 chain curtains for front protection

• Sliding side skids

• Rotor fitted with fixed hammers in a helical layout

• Transmission drive with 4 XPB belts

• Hydraulic piston motor Bosch Rexroth with fixed displacement (28cc) and built-in anti-cavitation valve

• Replaceable counterblades (C01)

• Base flange for coupling to remote controlled carrier 17367 TLE-125 hydraulic mulcher (60–120 L/min).*

HYDRAULIC MULCHERS

Technical

Req. excav. weight, min–max 10–16 tn

Req. pressure range, min–max 280–380 bar

Recommended flow range 105–170 ltr/min. Rotor diameter 375mm

No. of hammers (type) 30+2 (F09+F39)

Counterblades 5 replaceable rows

Coupling Bolted flange

No. of belts (type) 5 (XPB)

Skids Sliding, bolted (2 posi)

Weight 755kg

* Note:

- Custom excavator bracket is available separately, as a special order, please call to discuss your requirements.

- Hydraulic hoses/connectors to excavator not included.

NEW

3

REPLACEMENT HAMMERS

*Hydraulic hoses & connectors to remote controlled carrier / loader not included.

REPLACEMENT PARTS for TMC CANCELA

17388 Cylindrical taper lock VK 40 x 80 (STD003590-01) for gearbox drive shaft on the TDR and TDE models.

17389 Cylindrical taper lock VK 45 x 80 (STD003522-01) for the drive and driven pulleys on TMS, TJL and TP models.

17248 Drive belt XPB 1400 for THJ.

NEW NEW

17350 Green clutch plug for turbo clutch kits on TFT-250 & TFZ-225 models (A001954).

17356 17357 17353 17248 17388 17389

17356 F39 Outer Hammer for TLE, THE & THJ (use with Hammer F09 –17336).

17353 Bondioli (Black) replacement PTO guard for TDR 17256 (early models, as OEM: A001974).

17354 Walterscheid (Yellow & Green) replacement PTO guard for TDR 17256 (as OEM: A024266).

5 UNIVERSAL DIAMOND CUTTING BLADES

Double segmented, vacuum brazed diamond blade. Special vacuum process directly coats the blade with diamonds giving universal cutting properties. Suitable for use with MULTIPLE MATERIALS: Concrete – Reinforced & with exposed aggregate / Paving / Indian stone / Quarry slabs / Granite slabs & bricks / Cast iron / Sheet metals / Non-ferrous metals / Ducting / Plastics / Glass / Fibreglass / Rubber / Wood / Carbon fibre / Railway sleepers.

03879 115 x 1.6mm (4 ½”) Universal diamond cutting disc, Ø22.2mm ( 7/8”) hole. Single.

03880 240 x 1.6mm (9”) Universal diamond cutting disc, Ø22.2mm ( 7/8”) hole. Single.

WORKSHOP CONSUMABLES

6 TUNGSTEN CARBIDE ROTARY BURR SET

3-Piece set of Ø10mm No.6 cut (universal) Tungsten Carbide burrs.

• Head Shapes: Cylindrical Front End Cut, Rotary Ball Nose, Arc Pointed Nose

• For use on soft & hard metals, including welded seams 03826 Tungsten carbide rotary burr set, Ø10mm

7 SHANK MOUNTED GRINDING POINT SET (5 PIECE)

Rotary grinding stones suitable for use on most metals. Comprising five assorted shapes and abrasive types. Manufactured from aluminium oxide. Maximum working speeds 3000–6000 r/min. Shank diameter 6mm. 03829 Grinding point set, 6mm shank, 5 piece (49301).

8 BONDED SEALS – METRIC

Metal and neoprene seals for hydraulic couplings. 90 seals in 7 sizes.

One box containing sizes:

M10, M14, M16, M18, M20, M22, M24.

09549

11 HIGH TENSILE (G8.8) METRIC COARSE

THREADED BAR

Bright zinc coated high tensile Grade 8.8 metric coarse threaded bar. Ideal for making stud bolts, random length bolts and adjusters etc. Supplied in 1 metre lengths.

07471 M8 x 1m HT threaded bar.

14 MULTI-PURPOSE TUBELESS TYRE REPAIR KIT

Combined patch/plug repair kit for punctures in the tread of radial and cross-ply tubeless tyres. The patch/plugs self-vulcanise in the tyre – seals the inside of the tyre and the puncture channel in one easy operation.

• Suitable for all types of tyre including cars

Kit contains: 24 x 6mm patch/plugs, 24 x 8mm patch/plugs, 4 x 30g tube of cement, 1 x 6mm mill cutter, 1 x 8mm mill cutter.

19164 Multi-purpose tubeless tyre repair kit.

19165 Replacement 6mm patch/plugs. Pack of 24.

19166 Replacement 8mm patch/plugs. Pack of 24.

9 RING & FORK TERMINALS

200 assorted ring & fork terminals. Sizes include: Rings: 3.2 mm (red, blue). 3.7 mm (red, blue). 5.3 mm (red, blue, yellow). 6.4 mm (blue, yellow). 8.4 mm (blue, yellow). 10.5 mm (yellow).

10 HEAT SHRINK TERMINALS (ADHESIVE LINED) TOP-UP PACKS

Butt connectors.

19875 Red heat shrink terminals. Pack of 25. Blue heat shrink terminals. Pack of 25. Yellow heat shrink terminals. Pack of 10.

WORKSHOP EQUIPMENT

12 LITHIUM EP3 GREASE

EP3 Grease, high quality grease for use in anti-friction & plain bearings subject to high load.

• Compatible with other lithium based greases

• Good resistance to shock loads

• Operating temperature: -30°C to +140°C 14437 400g cartridge. Pack of 12.

13 HUB PULLER ACCESSORIES

95521 10 Tonne hydraulic ram.

95582 Main rods 200mm (male/male). Pair.

95583 Extension rods 260mm (male/female). Pair.

PROFESSIONAL INNER TUBE REPAIR KIT

A comprehensive kit for inner tube repairs, includes a selection of 105 patches in 7 sizes, supplied in a handy plastic carry case.

Consisting of: 1 x 321g liquid buffer aerosol, 1 x 236ml vulcanising cement, 1 x patch stitcher (wood handle), 1 x patch stitcher/buffer, 35 x 30mm, 20 x 35mm, 20 x 45mm, 10 x 55mm & 10 x 90mm round tube patches, 10 x 76mm x 48mm oval tube patches, 1 x valve core tool, 1 x 4-way valve tool, 20 x valve caps.

19167 Pro inner tube repair kit.

ORKSHOP

ORKSHOP TOOLS

Socket set manufactured from carbon steel that’s hardened and tempered with a polished finish. EXPERT

12-point sockets made from chrome vanadium steel that’s hardened and tempered with a polished finish. Each socket has a knurled ring for extra grip. Includes a 72-tooth reversible ratchet and accessories. Supplied in a tough plastic storage case with soft grip handle. Manufactured and tested in accordance with DIN3122 and ISO3315 specifications

Six sided for strength and positive fit

1

26 piece set consisting of:

11 x Metric sockets:

22, 24, 26, 27, 30, 32, 33, 36, 38, 41, 46mm.

10 x Imperial sockets: ,1. ,1. ,1. ,1. ,1. ,1. ,1. ,1. ,1. .

1 x Reversible ratchet,

1 x Sliding ‘T’ bar,

3 x Extension bars 100, 150, 200mm.

93009 ra er22 iece1 mm( )dri ehand socket set.

2

13mm ( ½ ”) DRIVE METRIC / AF HAND SOCKET SET (41 PIECE)

3 19mm ( ¾ ”) DRIVE METRIC / AF HAND SOCKET SET (26 PIECE)

41 piece set consisting of:

22 x Metric sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,

18, 19, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32mm.

10 A ocket , , , , , , , , , 1 .

3 x Spark plug sockets: 10, 12 & 14mm.

1 x 72 tooth ratchet with ‘quick release’ button

3 x Wobble extension bars: 75, 125, 250mm.

1 x Sliding ‘T’ bar. 1 x Universal joint.

97683 Draper Expert 41 piece 13mm (½”) drive hand socket set.

25mm (1”) DRIVE IMPACT DEEP REACH METRIC / AF SOCKET SET

Chrome-molybdenum (CR-MO) steel deep reach sockets with black silk finish. Supplied in a steel carry case. Impact sockets are essential when using air tools

4 5 COMBINATION RATCHET RING SPANNER/WRENCH SET

Professional heat-treated chrome vanadium set in mirror finish with 72-tooth ratchet ring.

• Smooth ratchet action required only 5° rotation

• Reversible switch

• 15° Offset ratchet head for knuckle clearance

• Includes Quick Release Socket and Bit Adaptors

Metric sizes: 8, 10, 12, 13, 15, 17, 18, 19 plus ocketada tor ( , )1 itada tor( ).

17736 12 piece metric spanner and adaptors set.

METRIC TAP AND DIE SET (45 PIECE)

Manufactured from tungsten steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium.

• High carbon steel

Contents:

20 metric dies (M6 – M24); 20 metric taper taps (M6 – M24); 2 tap wrenches; die holder; die adaptor and screwdriver

93825 45 piece metric tap and die set.

• Lightweight aluminium body

• Variable speed

• Lever block trigger

• Rotating air inlet

• Adjustable exhaust deflector

• Stored in a convenient heavy duty storage case Kit contents: 1 x Die grinder, 1 x Collet, 3mm, 1 x ¼ ” BSP air line connector, 2 x Open ended collet wrenches, 5 x hankgrinding tone , mm( ), 5 hankgrinding stones, 6mm ( ¼ ”).

03828 Air die grinder kit, 15 piece (83736).

7 50 TONNE HYDRAULIC PRESS with AIR ASSIST

Heavy duty floor mounted press ideal for straightening and bending metal for fabrication Saves time when pressing and removing bearings, bushes, gears etc

• anual or neumatic o eration for er atilit

• Height adjustable press bed, easily lowered or raised by hand-operated ratchet winch

• Hydraulic pump with quick release sprung ram return

• Eye level pressure gauge to assess pressure applied

Capacity: 50T

Bed opening: 175mm

Working range: 0 – 890mm

Stroke length: 175mm.

Press ram dia .: 60mm

Dimensions: W1190 x D800 x H1660mm

Weight: 276kg

28150 50 tonne hydraulic press

WORKSHOP EQUIPMENT

Trolley mounted high performance pneumatic pump and grease control gun Fits any standard 12 5kg to 18kg grease keg

10 MOBILE AIR GREASING SYSTEM

Supplied c/w trolley unit and 2m / ¼” delivery hose, grease gun with z-swivel, drum cover and follower plate

• Ensures fast and efficient greasing of machinery during busy periods

Minimum operating pressure: 30 psi, ratio 1:55 (ie 100 psi input gives 5,500 psi output)

NB Grease not included

94423 Air greasing system For use with 2 hp compressors and above

• Heavy-duty one-piece steel tank

• With removable shelf and parts basket

8 PARTS CLEANING TANK with TURBO FEATURE

• Triple baked enamel finish and fitted with fully sealed, magnetic drive pump unit

• Fluid re-circulated through replaceable filter element and directed onto workpiece through flexible metal delivery nozzle

• Turbo agitation, bubbles air through fluid to reduce soaking time and requires workshop air supply in addition to 230V electrical supply (can be used without turbo agitation if desired)

• Lid of tank fitted with fusible link hinge which automatically snaps lid shut in the event of a fire

Working capacity 50 ltr max / 40 ltr min

Motor 25W / 230v

Overall dimensions W810 x D540 x H880mm

Pump output 200 ltr/hr

Tank dimensions W810 x D540 x H260mm

Weight 23 62 kg

98097 50 Litre parts cleaning tank

GYS KRONOS 400T

HUSQVARNA PW 240

COMPACT COLD WATER PRESSURE WASHER

An easy-to-use pressure washer purposely designed to optimise your outdoor cleaning Maximizes efficiency and comfort with easy storage and transportation

Durable metal pump for long life

• Compact and lightweight

• 140 bar max pressure (2,030 psi) for efficient operation

• UltraFlex High-Pressure hose

• Dual gun and lance storage

• Intuitive nozzle and pressure guide

• 8m Built-in hose reel

• Foldable handle for easy transport and storage

Max pressure 140 bar

Water output 348–465 ltr/hr

Power cable length 5m

High pressure hose length 8m

Weight 12 kg HV342 PW 240 compact washer 230v (970 64 81-02)

MULTI-PROCESS ELDER

PHASE 50A MIG / MAG

MULTI-PROCESS WELDER

MULTI PROCESS

• MIG/MAG welding:

- steel and stainless steel wire: Ø 0 6 to 1 2 mm

- aluminium wire: Ø 0 8 to 1 2 mm

- flux-cored wire (inverted polarity): Ø 0 9 to 1 6 mm

• MMA welding: basic and rutile rods

• TIG DC Lift / Pulse

INTELLIGENT

• Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi Automatically determines the optimal welding parameters after entering: wire diameter, material/gas and thickness

• New bright and user-friendly 3 5" HMI

• Full machine software and synergy updates available via USB stick

• Storage of up to 200 welding programs (job)

• Portable configuration function; the ability to load, save and transfer user jobs via USB

• On-demand ventilation system

PREMIUM WELDING

• Digital arc control with instant ignition

• Very stable arc – reduces welding spatter

• 4-roller wire feeder for smooth operation

2x DISPLAY MODES

• Easy: suitable for the vast majority of users

• Expert: for the most experienced welders, allows the user to adjust all the parameters of the welding cycle

17144 KRONOS 400T (3-phase) inverter / MIG welder c/w wire feeder unit WF 35, 5m connector cable and 4m MB36 torch .

The KRONOS 400T is a 3-phase, multi-process power source with separate wire feeder Innovative technology ensures excellent arc characteristics for demanding MIG / MAG applications

Integrated synergies make set-up easier and reduce welding spatter

PHASE

Specification

Approval

Supply

Fuse rating

Welding range 20 – 400 am .

Duty cycle 60% at 300 amps

Welding wire 0.  –1.2mm.

Reel dia size 200 –  00mm.

Dimensions L900 x W550 x H670 (+480mm feeder)

Weight 53 kg (plus 13 6 kg)

1 KIELDER KWT-01 -02

18V BRUSHLESS

4½ ” ANGLE GRINDER with 2 x 5.0AH LI-ION BATTERIES

Versatile tool for fast, effective grinding –

Power Endurance Balance

• Variable speed (4,500–8,000 rpm) through 5 settings

Kit includes:

1 x Angle Grinder KWT-013 (16734),

2 x 5 0Ah Batteries (16727),

1 x Battery Charger (16728) plus carry case

Grinder Features and Specification

See listing below, prod: 16734

16733 115mm (4 ½”) 18V Angle grinder kit (KWT-013-02)

2

KIELDER TOOLS SUPPLIED WITH 3 YEAR MANUFACTURERS WARRANTY*

Body

4

4½ ” 18V BRUSHLESS ANGLE GRINDER (BODY ONLY)

Versatile tool for fast, effective grinding .

• 4 pole digital brushless motor – gives higher torque at lower speeds

• Variable speed (4,500–8,000 rpm) through 5 settings

• Ergonomic design for ultimate comfort in use

• Dual function switch – as a trigger or with lock-on

• Cam-lock quick adjustment guard mechanism

• Overload protection system

• Central spindle lock for easy tool-less disc change

Voltage 18 volt

Battery type Samsung Lithium-ion

Power 800 Watt

Speed Settings 5

Gearbox All-Metal

Spindle thread 14mm

Max disc dia 115mm (4 ½”)

No load speed 4,500–8,000 rpm

Weight 2 3kg (inc battery)

16734 115mm (4 ½”) 18V Angle grinder (KWT-013-06) Body only

3 KIELDER KWT-TPK-08

18V TWIN PACK –

700NM IMPACT WRENCH & 4½ ” ANGLE GRINDER

Duo 18 volt Brushless Twin Pack

Kit includes:

1 x ½ ” 700Nm Impact Wrench KWT-012 (16724),

1 x 115mm (4 ½”) Angle Grinder KWT-013 (16734),

2 x 5 0Ah Batteries (16727),

1 x Battery Charger (16728) plus carry case

Features and Specification

Impact Wrench – See catalogue pg 410, prod: 16724

Grinder – See listing below, prod: 16734

16735 Kielder 18v TWIN PACK Wrench & Grinder kit (KWT-TPK-08)

18V TOOL KITS BODY-ONLY

KIELDER KWT-085-02

½ " DRIVE BRUSHLESS HIGH TORQUE IMPACT WRENCH with 2 x 5.0AH LI-ION BATTERIES

Professional, ultra-high torque impact wrench, ideal for effective removal of stubborn wheel nuts and heavyduty fastenings Kit includes:

1 x HIGH TORQUE Impact Wrench KWT-085-06 (16732),

2 x 5 0Ah Batteries (16727),

1 x Battery Charger (16728) plus carry case

Wrench Features and Specification

See listing below, prod: 16732

16717 ½” Drive 18V HIGH TORQUE impact wrench kit (KWT-085-02)

5 6 KIELDER KWT-01 -06

KIELDER KWT-040-06 13mm ( ½ ”) DRIVE BRUSHLESS ULTRA COMPACT IMPACT WRENCH (BODY ONLY)

This ultra compact Impact Wrench packs unrivalled power into a tool body that is only 110mm in length, ideal for use in tight and awkward spaces

• Impressive 400Nm of torque from an ultra compact design; only 110mm length

• Kielder G-Square Technology to reach top torque faster

• 3 torque and speed modes (High / Medium / Low)

• All metal gearbox • Variable speed in forward & reverse

• Electronic brake system • Integrated LED light

Voltage 18 volt

Battery type Samsung Lithium-ion

Max tightening torque 400Nm / 280Nm / 175Nm (High / Medium / Low)

Max Bolt Diameter M20

Drive ½” Square

No Load Speeds 0–1,600rpm/2,000rpm/2600rpm

Impact rate 0–3300 ipm

Weight 1 6kg (inc battery) 16744 ½” Drive 18V ‘Stubby’ (KWT-040-06) Body only

KIELDER KWT-085-06

½ ” DRIVE BRUSHLESS

HIGH TORQUE IMPACT WRENCH

Professional, HIGH TORQUE impact wrench, ideal for removal of stubborn wheel nuts & heavy-duty fastenings .

• Massive 1,050Nm tightening torque, plus up to 1,790Nm of breakaway torque

• Kielder G-Square Technology to reach top torque faster

• 3x Torque and Speed modes (High / Medium / Low)

• Variable speed in forward and reverse

• Integrated LED light illuminates the work area

• Electronic brake system

Voltage 18 volt

Battery type Samsung Lithium-ion

Max fastening torque 1,050Nm / 726Nm / 363Nm

Max breakaway torque 1,790Nm

Max bolt diameter M33

Drive ½” square

Speeds 0–660rpm/1,320rpm/2,000rpm

Impact rate 0–2,200 ipm

Weight 3 4kg (inc battery)

16732 ½” Drive 18V HIGH TORQUE impact wrench (KWT-085-06) Body only

AVERY DENNISON®

Conspicuity tapes designed for application onto trucks / trailers with rigid surfaces

ESSENTIALS

7 REFLECTIVE CONSPICUITY MARKING TAPE

• Outstanding long distance night-time visibility

• Increased visibility and safety of marked vehicles

• Resistant to pressure washing, Impact resistant

Approved to ECE 104R-000001, Class C 8 Year warranty

Application: Side – White & Yellow Rear – Red & Yellow

Important: White must NOT be used on Rear

25166 Yellow conspicuity tape 50mm x 50m roll

25167 White conspicuity tape . 50mm x 50m roll .

25168 Red conspicuity tape 50mm x 50m roll

8 LIGHTING POD SET (HALOGEN)

Two independently mounted bolt-on light units c/w reflective triangles and wired up with 7m cable and male 7 pin plug E Approved

Cable length 7m

Max extension 2 1m

Fitted with Male 7 pin plug

Function 4, Brake / Tail / Indicator / No Plate

28147 Lighting pod set (Halogen)

28148 Replacement lamp cluster for 28147

28149 Replacement lens cover for 28147, 28148

IN-CAB DEVICE MOUNTS

Aluminium 18” rod (with plastic sheath) can be bent to achieve an ideal viewing and operating angle for your device

Designed to connect a 1” ball to a 1 .5” ball, and vice versa

10

12V LED BALLAST SOCKET & PLUG 7 PIN

Designed to eliminate the bulb failure warning becoming activated on tractors which are towing trailers with LED lights . It mimics the load of normal lights and compensates for the low power consumption of LED lights, giving the driver/operator confidence that should the bulb failure warning light come on in the cab it will NOT be a false alarm

• Easily portable for multi-vehicle use

• Simply fits between the tractor towing socket and the LED trailer lighting plug

• Electronics fully encapsulated against water/vibration

• Solid state electronics

19697 12V LED Ballast socket & plug, 7 pin

Features a 1” B size rubber ball connected to a 1 . 25” x 2 . 5” inch diamond plate . The base has two holes at 48 . 5mm centres, compatible with a wide variety of RAM® device holders and cradles

Ball / Socket size

70223

14 13" EXTRUDED MODULAR ALUMINIUM TOUGH-TRACK

With RAM® Tough-Track™, flat surface mounting possibilities are nearly endless

• 13” of usable aluminium track for track mounts: overall length of 16”

• RAM® Tough-Track™ can be drilled to any flat surface and is designed for use with #8 screws for easy installation –fasteners not included

• Modular top-loading end caps allow for track extensions and 90° connectors

• Compatible with B and C size RAM® track bases (70224, 70225) to attach action camera, phone and tablet mounts

70228 RAM-TRACK-EXA-13

11 18” RIGID DOUBLE SOCKET ARM ( for B SI E 1 BALL BASES)

Includes B Size 1” single socket arms at both ends, compatible with all B Size 1” ball bases and adapters Ball / Socket size B Size (1”)

Weight capacity Holds 2 lbs

RAP-B-200-1-18

15 ‘B’ SIZE 1" DIAMETER TRACK BALL with T-BOLT ATTACHMENT

For use with RAM® Tough-Track™ (70228) to give a slide and reposition base solution

Ball / Socket size B Size (1”)

Weight capacity:

Standard use 0 9 kg

Heavy-duty use 0 45 kg

70224 RAP-B-354-TRA1

12 DOUBLE SOCKET

13 ‘B’ SIZE DIAMOND BASE with 1” BALL

B to C ADAPTER for 1" to 1.5" BALLS

These arms connect in the middle via an octagon button allowing them to independently swivel 360° relative to one another

Socket size B Size 1” to C Size 1 5”

70227 RAP-BC-201

TOUGH-TRAY II UNIVERSAL NETBOOK / TABLET HOLDER

Spring-loaded universal laptop and tablet holder with expandable tray that can accommodate 8 5 –12 3" devices including Apple iPads Simple to install and adjust, retaining arms ensure a perfect fit without interfering with ports or functions Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down

• Compatible with ‘C’ Size RAM® Mount Components (1 5” Balls)

• Lifetime warranty against manufacturing defects

Compatible Devices: iPad Pro 12 9 (or any device that suits the dimensions listed below)

Tray width range 8. 56” to 11 12”

Side clamp arm height 2. 75” max

Tray depth 6”

16 ‘C’ SIZE 1.5" DIAMETER TRACK BALL with T-BOLT ATTACHMENT

For use with RAM® Tough-Track™ (70228) to give a slide and reposition base solution

Ball / Socket size C Size (1 5”)

Weight capacity Holds 4 lbs

70225 RAP-354-TRA1

Tray thickness 1”

Hole pattern:

4-Hole AMPS 1 181” x 1 496”

Note: If using more than 4 retaining arms a 70230, hardware pack, will be required

70229 Tough-Tray II universal netbook & tablet holder (for use with 70205 ball base)

70230 Pack of 4 machine screws and nylock nuts (RAM-HAR-MET-TAB1)

TOP LINKS

HYDRAULIC TOP LINKS

1 HYDRAULIC TOP LINK, CAT. 2 / 2 BALL / BALL

Min – Max Length 500mm –726mm

Supplied with: 800mm Hose set

Cylinder bore ID: ... . 63mm / Rod Ø 35mm – Suitable for tractors up to 100hp (74kW) .

Lift @180 bar ..... . 3,960 kgs .

Weight ........... . 11 . 68 kg .

27929 Cat . 2 / 2 Ball / Ball, hydraulic top link, 500–726mm .

Supplied c/w non-return valve, 800mm hose set .

3 HYDRAULIC TOP LINK, CAT. Q/R CBM HOOK / KNUCKLE ( Ford/Fiat )

Min – Max Length 650mm – 876mm

Supplied with 800mm Hose set, chain & ball, depth rod & marker label with knuckle & pin

Cylinder ID 90mm / Rod Ø 45mm – Suitable for tractors up to 200hp (147kW)

Lift @180 bar: 8,770 kgs

Weight 26 95 kg

27931 Cat 3 Q/R CBM Hook/ 28mmØ Knuckle, hydraulic top link, 650–876mm (Ford/Fiat) Supplied c/w non-return valve, 800mm hose set

2 HYDRAULIC TOP LINK, CAT. 2 / 2 BALL / BALL

Min – Max Length 570mm – 866mm

Supplied with 800mm Hose set

Cylinder ID ........ . 63mm / Rod Ø 35mm – Suitable for tractors up to 100hp (74kW) .

Lift @180 bar ..... . 3,960 kgs .

Weight ........... . 12 . 78 kg .

27930 Cat . 2 / 2 Ball / Ball, hydraulic top link, 570–866mm . Supplied c/w non-return valve, 800mm hose set .

4 HYDRAULIC TOP LINK, CAT. Q/R CBM HOOK / CAT. 2 KNUCKLE

Min – Max Length 650mm – 876mm

Supplied with: 800mm Hose set, chain & ball, depth rod & marker label with knuckle & pin

Cylinder ID 90mm / Rod Ø 45mm – Suitable for tractors up to 180hp (135kW)

Lift @180 bar 8,770 kgs

Weight 26 95 kg

27932 Cat 3 Q/R CBM Hook/Cat 2 25 4mmØ Knuckle, hydraulic top link, 650–876mm Supplied c/w non-return valve, 800mm hose set

HYDRAULIC HOSE GRIP

5 HYDRAULIC TOP LINK, CAT. Q/R CBM HOOK / CAT. KNUCKLE

Min . – Max . Length .. 650mm – 876mm .

Supplied with ..... . 800mm Hose set, chain & ball, ................... depth rod & marker label with knuckle & pin .

Cylinder ID 90mm / Rod Ø 45mm – Suitable for tractors up to 200hp (147kW)

Lift @180 bar: 8,770 kgs

Weight: 26 95 kg

27933 Cat 3 Q/R CBM Hook/Cat 3 32mmØ Knuckle, hydraulic top link, 650–876mm Supplied c/w non-return valve, 800mm hose set

6 HYDRAULIC HOSE GRIP HANDLES

FastGrip® LM12GAS hydraulic hose grip handle kits

Making connection and line identification easier

• Can fit both ISO7241-A or ISO16028 couplings

• Internal diameter fits ½ ” hoses

• Steel adaptor with hexagonal shape to avoid handle rotation

18900 Fastgrip® LM12GAS with BLUE + & - symbols

18901 Fastgrip® LM12GAS with YELLOW + & - symbols

18902 Fastgrip® LM12GAS with RED + & - symbols

18903 Fastgrip® LM12GAS with GREEN + & - symbols

COLOUR CODED

SF FILTER

Exdended range of filters for Agriculture from the SF-Filter-Group - the leading supplier of mobile and industrial filters of any type and origin.

SF FILTERS

56435 Fuel filter (SK3478)

56436 Fuel filter (SK3108)

56437 Fuel filter (SK48683)

56438 Fuel filter (SK48672)

56439 Fuel filter (SK48780)

56440 Fuel filter (SK48779)

56441 Fuel filter (SK3099)

56442 Fuel Filter (SK48786)

56443 Fuel filter (SK48684)

56444 Fuel filter (SK48785)

56445 Fuel filter (SK3094)

56446 Fuel filter (SK3709)

56447 Fuel filter set (SK3188-SET)

56448 Hydraulic oil filter (HY90562/1)

56449 Fuel filter (SK3102)

56450 Fuel filter set (SK48591-SET)

56451 Hydraulic oil filter (HY90389)

56452 Hydraulic oil filter (HY90584)

56453 Hydraulic oil filter (HY9895)

56454 Oil filter (SP4629)

56455 Oil filter (SP4833)

56456 Hydraulic oil filter (SPH9914)

56457 Hydraulic oil filter (HY90500)

56458 Hydraulic oil filter (HY90563)

57017 Fuel filter (SK3065/1)

57018 Fuel filter (SK3105)

AEROSOL ENAMEL

9 AEROSOL HARD IMPLEMENT ENAMEL

Ideal for touching up and ‘blowing in’ small areas. All aerosols contain an anti-clogging agent for ease of use. Drying time/overcoating 30 mins.

Flash point max. exposure 50°C.

28408 JCB Yellow. 400ml enamel aerosol.

28409 Väderstad Red. 400ml enamel aerosol.

28410 Kverneland Red. 400ml enamel aerosol.

28411 Case Matt Black. 400ml enamel aerosol.

8 554 kg HAND WINCH

Compact unit with very low torque for easy operation, fitted with 10m wire cable and hook.

• One-way single speed ratchet system

• simple strong and functional design

• zinc plated heavy gauge steel frame

• Easy bolt-down mount design

97664 1,200 lbs (544 kg) Hand winch.

28412 Sumo Red. 400ml enamel aerosol.

28413 Claas Harvest Green, 400ml enamel aerosol.

28414 Lemken Blue. 400ml enamel aerosol.

28415 Bailey Dark Green. 400ml enamel aerosol.

If refurbishment is under taken, some colours may change with age. It is important that the paint is carefully checked before use as we cannot accept responsibility if work is not the correct shade. For technical reasons connected with printing, reproduction and paint manufacture, the colours indicated on these pages may not match the actual paint shades exactly.

SAFETY SPECTACLES

• Ultra lightweight

• Polycarbonate wrap around lens

• Optical Class 1 with UV filter

• Low impact

• One piece side arm

Conforms to EN166 1FT

22488 Safety spectacles. Clear (2C-1.2 UV filter).

1 Pair.

22489 Safety spectacles. Grey (5-2.5 UV filter).

1 Pair.

HEAD GEAR HOLDER & VISORS

Head gear carriage only, can be used with 22497 Clear or 22498 Steel mesh face visors.

• Fully adjustable • Ratchet fastening

• Soft nylon padded browguard

Conforms to EN 166 3 B (when worn with clear visor)

Conforms to EN 1731 F (when worn with mesh visor)

22496 Head gear visor holder only (use with 22497 or 22498).

22497 Clear face visor only, use with holder 22496.

22498 Steel mesh visor only, use with holder 22496.

Ideal for handling light components

• Polyurethane palm coated

3M PELTOR OPTIME I

SNR 27 EAR DEFENDERS

Soft, wide cushions for comfortable wear. Slimline cups for a more compact design. Sealing rings filled with fluid and foam. Slim design makes muffs easy to store and carry.

CE Approved to EN 352-1:1993

Attenuation data: SNR = 27dB

(H = 32dB, M = 25dB, L = 15dB).

Weight 180g.

22718 3M Peltor Optime I Ear Muffs. 1 Pair

PU COATED PALM FIT GLOVES

• 35% polyester + 65% PU

• Polyurethane coated palm

• Machine knitted

• Integrated elasticated wrist

Approved to EN388: 2016 4.X.2.1.A

22367 Size 9 (L). Pack of 10 pairs.

STIHL WORKWEAR

• Easy handling thanks to metal clips with plastic inlay

POLY COATED PALM FIT NYLON GLOVES

• Black nylon glove

• Machine Knitted

• Integral elasticated wrist

Approved to EN388: 2016 4.X.3.1.A

22368 Size 9 (L). 1 Pair.

22369 Size 10 (XL). 1 Pair.

SAFETY SIGN

STIHL ADJUSTABLE BRACES WITH BUTTON HOLES

• Elastic braces made from polyester and rubber

• For comfort while working

• Buttons fastened with leather loops

Colour Orange

Length 120cm

S3086 Braces with button holes (0000 884 1511).

STIHL BRACES WITH METAL CLIPS

• Elastic braces made from polyester and rubber

• Work comfortably without pressure from tight clothing; with leather reinforcement

Colour Orange.

Length 130cm.

S3087 Braces with clips.

CHEMICAL STORE

HAZARD WARNING SAFETY SIGN

Workplace safety sign, conforms to the latest ISO 7010 standard.

Manufactured in 3mm semi-rigid PVC.

25084 ‘No Smoking or Naked Flames’ chemical store sign, 600 x 400 x 3mm.

FD90 PU NON-SAFETY WELLINGTONS

Lightweight PU construction (upper and sole) with Comfort footbed and energy absorbing seat region for superb comfort and stability. Long lasting, breathable PU material keeps your feet healthy.

• Soft non-safety toe

• Conforms to: EN ISO 20347:2012 O4

• Excellent cold insulation properties down to -17°

• 100% Waterproof to keep feet dry

• Enhanced tread pattern for a better traction

• Includes orthopedic, washable, antibacterial, removable footbeds with arch support and shock absorbing heel cushioning

• CE certified, UKCA marked

• Anti-static footwear

• Energy absorbing seat region

• SRC – Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces

• Fuel and oil resistant outsole

• 100% metal free

PPE WELLINGTONS

FIRE SAFETY STICK FIRE EXTINGUISHER

The Fire Safety Stick is an all-new kind of fire extinguisher that requires less knowledge or training for the everyday person. An extinguisher that works on 5 classifications of fire, meaning less margin for error if accidentally choosing the incorrect traditional extinguisher, and reduced risk of making the fire worse in a high-stress situation.

The Fire Safety Stick is unlike any other extinguisher on the market. It is unpressurised and is activated much like striking a match.

• Works on 5 fire classes (see below)

• Massive 50 seconds minimum discharge time

• ONLY weighs 215g each

• Leaves NO damaging mess or residue

• 15-year shelf life

• NO servicing required

• Can be activated & left behind while you escape!

• Safe to breathe in! (animals inc.)

• Eco-Friendly, Recyclable

08401 Fire Safety Stick fire extinguisher (FSS50).

FD95 PU SAFETY WELLINGTONS (S5)

The ultimate in comfort and safety. More flexible and longer lasting than PVC or Rubber due to its air bubble structure which provides air circulation. PU keeps feet hot in winter and cool in summer.

• Safety rating: S5

• Conforms to: EN ISO 20345 : 2011 S5

• Steel toecap and steel midsole, anti-static and SRC slip rated

• Excellent cold insulation properties down to -17°

• 100% Waterproof to keep feet dry

• Enhanced tread pattern for a better traction

• Includes orthopedic, washable, anti-bacterial, removable footbeds with arch support and shock absorbing heel cushioning

• CE certified, UKCA marked

• Anti-static footwear • Energy absorbing seat region

• SRC – Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces

• Fuel and

• Protective steel toecap

• Pierce resistant steel midsole

• Integrated superior metatarsal protection for heavy duty industries

METTAMAX SAFETY WELLINGTONS (S5)

The Mettamax Safety Wellington offers complete foot protection. The innovative design allows flexibility and comfort to the wearer. It also helps protect against hazards in heavy industrial work environments.

• Safety rating: S5

• Conforms to: EN ISO 20345: 2011 S5

• Fibreglass toecap & pierce resistant composite midsole

• Integrated flexible meta-guard for optimum flexibility and metatarsal protection

• Reinforced ankle protection • Kick spur

• Enhanced tread pattern for a better traction

• CE certified, UKCA marked

• Anti-static footwear • Fuel and oil resistant outsole

• Energy absorbing seat region

• 100% Waterproof to keep feet dry • Cold insulation

• SRA – Slip resistant outsole to prevent slips and trips on ceramic surfaces

Upper PVC/Nitrile

Sole PVC/Nitrile

28072 Black. Size 7. 1 Pair.

28073 Black. Size 8. 1 Pair.

28074 Black. Size 9. 1 Pair.

28075 Black. Size 10. 1 Pair.

28076 Black. Size 11. 1 Pair.

28077 Black. Size 12. 1 Pair.

28078 Black. Size 12. 1 Pair.

FIRE SAFETY

THE LIGHTEST AND MOST INNOVATIVE FIRE

• Can be activated & left behind while you escape!

OVER 50 SECONDS DISCHARGE TIME

Solid Materials: Plastic, Wood, Paper, Textiles.

Class B: Flammable Liquids: Petrol, Diesel, Oil, Paraffin.

Class C: Flammable Gases: Methane, Propane, Butane.

Electrical Fires: Rated up to 100,000volts - TVs, Computers, “White-Goods”.

Class F: Cooking Oils & Fats: eg. In the kitchen – frying.

Dimensions: 270mm length, 35mm width.

ENCING EL ARE

HOTLINE PEREGRINE (4 HM 00)

7 JOULE MAINS ENERGISER

Dual output mains energiser with LED fence performance monitor and battery back-up input

• 12v battery back-up input*

• Battery back-up monitor

Powers up to 60km of wire or 30 sheep nets or 25 rabbit nets

Power consumption 10 Watts

18427 Hotline 7 joule Mains fencer (47HM700)

3 STIRRUP HORSE POST (WHITE)

• 11 fixings for polywire, rope or tape up to 40mm 06157 1200mm Multi-wire plastic post, white, 11 space Pack of 10

2 10 WATT SOLAR PANEL with STAND

Simple solar assist panel, connects directly to your 12v leisure battery, extending the period between battery charges or cutting out the need for battery charges altogether depending on use

• Fitted with a charge controller, to guard against overcharging

• Supplied with a sturdy mounting stand 06264 10 Watt Solar panel & stand (47SP10W-S)

4 ADJUSTABLE INSULATOR

• Deep body – stands wire of post

• Quick fit, for plain metal posts

• Suitable for wire and rope

5 INSULATED RATCHET STRAINER

Ratchet aluminium wire tensioner for steel wire with insulator.

06419 Insulated strainer (47T26-1)

FENCE STRAINER (HOOK TYPE)

Hook type strainer, complete with six-metre chain and hook

• Ideal for use with Netting Fence Strainer clamps

• Do not exceed 600kg load or put pipe over handle of boundary strainer

06422 Boundary strainer, hook type (FBY00020)

GRIPPLE® BARBED HIGH TENSILE JOINER

• Easy to install – Join or repair HT barbed wire in seconds

• Built in release – Release and adjust if needed

• Compatible – Use with 1 57mm to 2mm wire

• Strong – Up to 16% stronger than traditional wire knot

• Long lasting – Made from corrosion resistant materials, designed to outlast your fence

Load Rating 400 kg / 882 lb

Wire Range 1 57mm, 1 80mm, 2 00mm

40404 Barbed high tensile joiner (HT-BRB-BB) Pack of 20

GRIPPLE® POSTGRIP TENSIONER For WOODEN POSTS

Eliminate the need for conventional tie-off knots around strainer posts

• Patented ceramic locking mech provides strong grip

• Stainless steel spring – excellent corrosion resistance

• Suitable to use with 2 00mm–3 15mm wire

Load rating 400 kg / 882 lb

Wire range 2 00mm–3 15mm wire

40405 PostGrip tensioner for wooden posts (POSTGRIP-BB) Box of 80

HK CALF PULLER, MECHANISM 2020 with ADJUSTABLE HEAD

• Low weight, as made entirely out of aluminium

• With 3 hooks for the calving ropes enabling both alternate and equal tension

• Super easy to use quick release, even under load

• The mechanism can be moved 360° around the tub, providing unlimited flexibility

Adjustable head width 49cm–63cm

06318 HK Calf puller c/w large plastic head and adjustable metal side clamps