REPAIR BOOKLET
* A new Construction for Inflatable SUP Boards
*
Inflation
1. Connect the hand pump’s hose to the board’s valve. Insert the hose and twist clockwise to lock.
2. The maximum pressure at which the board should be inflated is 1 bar, but the recommended pressure is 700 mbars. The pressure meter attached to the hand pump, conveniently displays internal pressure.
Deflating, packing and storing
1. To deflate, press, rotate and release 2. Before packing, make sure that all valve pin. Valve will spring upward and the air is out of the board and that the remain open. Fold board from tail or board lays flat on a surface. press down to quicken air release. 3. Fold the board like shown in the pictures bellow
Deflating, packing and storing
4. After the board has been properly folded, put it in the box with which it was delivered. 5. Wherever you store it, please put it in the box in order to avoid getting dusty or damaged by mistake..
The diagramm shows clearly that over 1,0 BAR is no increase of stiffness.
Making reparations
1. If you find a damaged spot, mark 2. Cut out a patch from supplied PVC it and start making the reparation. material. Mask outer limits where the patch will be affixed, as a guide for Start making the repair. where glue will be applied.
3. Using a paintbrush, apply the glue 4. Then apply the glue on the PVC boat fabric patch. on the board, inside the guiding area.
5. Let the glue dry for about 5 minutes, remove the tape which is around the guiding area and glue the patch in place.
6. Using a pressure roll or something similar, apply pressure on the patch in order to create a strong bond between it and the board’s surface. And then it is done.
Repairing a 3 cm tape
1. If there is a leak of air on the 3cm tape, you can fix as shown. 2. Mark the leak area and apply tape to protect from dirt.
Repairing a 3 cm tape
3. Using a flat bladed implement, carefully lift the tape in the area of the leak.
4. Apply glue near separated area, carefully smear between board‘s double wall surface and side wall using the flat blade.
5. Let the glue dry and then apply pressure on the spot.
Repairing the EVA pad In case the EVA pad unglues a little in a certain spot, this is how you should easily fix the problem.
1. First, put a paper tape or something similar on the spot to avoid getting the board dirty.
3. Let the glue dry for 5 – 10 minutes and then apply pressure with a pressure roll or something similar.
2. Then, using a small screwdriver, glue the spot where the problem is, making sure that the glue is both on the EVA pad and on the double wall fabric.
iCROSS iCROSS
iCROSS
DIMENSIONS 12‘6“ 11‘5“ CRUISER ADVENTURE 12‘6“ CM CM LENGTH 11‘5“ /| 380 350
11‘5“ ADVENTURE
ound
The 11’5” became an instant bestseller and is a real All Round
DIMENSIONS 10‘5“ 11‘5“ ADVENTURE 10‘5“ CM CM LENGTH 11‘5“ /| 320 350
arallel
WIDTH
31“ 31.5“ /| 79 80CMCM
board, perfect for rental centers and SUP schools. With parallel
WIDTH
31“ 31.5“ /| 79 80CMCM
80 cm
THICKNESS
6“ 6“ /| 15 15CMCM
edges, this smooth running, directionally stable board is 80 cm
THICKNESS
6“ 6“ /| 15 15CMCM
and very
VOLUME
285 L 265L
(31.5”) wide, making it a very secure board on the water and very
VOLUME
285 L 210L
ormance
WEIGHT
32.2incl.LBS 8,2kg Fin | 13,7 KG
easy and stable to paddle. With its excellent price to performance
WEIGHT
32.2incl.Fin LBS | 13,7 KG 7,2kg
great
ratio, the 11’5” is an ideal family and friends board and a great CHARACTER 12‘6“ 11‘5“ ADVENTURE CRUISER STABILITY
90 % 100%
TRACKING
90% 90%
tions in the
MANEUVER
60% 50%
mbers or
SPEED
80% 70%
anyone
ayers and
CHARACTER 10‘5“ 11‘5“ ADVENTURE
vehicle for cruising in all conditions.
STABILITY
80 % 100%
This board is a compact Cross Over board that will satisfy anyone
TRACKING
70% 90%
from flat water in the lake or river to choppy water conditions in the
MANEUVER
90% 50%
sea. The board is stable enough to carry young family members or
SPEED
60% 70%
your dog while paddling. FINS 10‘5“ 11‘5“ ADVENTURE
FINS 12‘6“ 11‘5“ CRUISER ADVENTURE US Box fin System: 20 cm | 7‘8“
The 11’5” has an outer shell structure, consisting of two layers and
aterial for
features a heavier military grade 860 g/m2 drop-stitch material for
aking it the
the 11’5” replacing the 650 g/m2 used for other iSUPs, making it the toughest board in the Mistral iSUP family.
uch as
ive
e range
US Box fin System: 20 cm | 7‘8“
Besides the obvious advantages of an inflatable board, such as
Sensational Board weight: 10‘5“ x 31“ including Fin, only 7.2 Kg 12‘6“ x 31“ including Fin, only 8.2 Kg
easy storage and transport, extreme sturdiness and relative indestructibility (even after contact with rocks) their huge range of uses makes them ideal boards for the entire family.
trips
Its dual Cargo Net allows extensive touring and camping trips
US fin box
allowing you to easily secure bags under these nets. The US fin box
ket.
is compatible with any standard fin available on the market.
MISTRAL STAND UP PADDLING | 41
MISTRAL STAND UP PADDLING | 4
20-12-13 15:39
20-12-13
www.mistral.com MISTRAL RED DOT DIVISION B.V. Industrieweg 4/A, NL-7641 AT Wierden,The Netherlands Phone: 0031-(0)546 484 680, Fax: 0031-(0)546 484 689 General information: info@mistral-red-dot.com “Mistral Red Dot Division B.V. is the official licensee for SUP Boards of Mistral International” © C op y right 2014 - all rights reserved Mistral International wierden, the netherlands info@ mistral .com
http://www.facebook.com/mistralsup https://twitter.com/MistralSUP http://blog.mistral.com