ONE SOURCE. MANY SOLUTIONS.

New CTM series manual load testers:

▪ Fully Windows 10, 11 compatible.

▪ Includes WIFI access to the company network.

▪ Includes new CT-18 DDA technology, allowing for fast and accurate "pass-through" testing without the need for mechanical stops.

▪ Tolerances up to 3 force at height positions can be entered and part disposition displayed via red and green in or out-of-tolerance indicators.

▪ A real-time report including min, max, average, sigma, Cp, and Cpk statistics can be displayed and printed.

▪ A reverse engineering spring analysis module is available to aid the coiler setup, via free length, OD, or even wire size suggestions with respect to part load tolerances.

▪ A very small footprint of only 7.08"x10.63", allowing location next to the spring coilers.

▪ Load capacities from 10N (2.24lbf) up to 1000N (224lbf) are available in the model range.

▪ Includes both compression and extension attachments.

Sas Spring Testers

SAS Spring testers o ering a full line of manual & automatic compression and torsion spring testers, setting, load sorting, and pitch tracing machines. SAS; our focus is on spring testing and customer support.

DELTA 8 AXIS CNC COILER SERIES

8 AXES CNC COILER

D-808 .004-.039”/0.10-1.00mm (In-stock)

D-816 .016-.079”/0.4-2.00mm (In-stock)

D-826 .039-.118”/1.00-3.0mm (Shown)

By Edward Lanke