Pressure, Level & Temperature Transmitters & Transducers
GENERAL PURPOSE FLUSH DIAPHRAGM TRANSMITTER Models 117, 217, 317, 317Z (FM/CSA Intrinsically Safe) FEATURES: • Flush Diaphragm • All-welded type 316 & 15-5 ph stainless steel • Rugged, all encapsulated electronics • Minimal zero installation effect
PRESSURE RANGES: • From 0-50 to 0-10,000 psi (See ordering guide)
ACCURACY: • From 0.2% FSO to 1.0% FSO • (See specifications & ordering guide) COVER SCREWS FOR ZERO/SPAN ADJUST OPTION GJ
1.125 HEX O-RING GROOVE OPTION HC
1.5 DIA.
3/4-16 UNF-3A THREAD
36” PIGTAIL
1.50 DIA.
0.652
0.56 0.45
3.5
Some options will affect dimensions. Consult factory if important.
WIRING CODE A/1 RED B/2 GREEN C/3 WHITE D/4 BLACK
117 + EXC. + SIGNAL - SIGNAL - EXC.
217 + EXC. + SIGNAL NC - EXC./SIGNAL
317 + EXC./SIGNAL NC NC - EXC./SIGNAL
E/5 BLUE F/6 BROWN SHIELD
CAL. OPTIONAL CAL. OPTIONAL OPEN
CAL. OPTIONAL CAL. OPTIONAL OPEN
CAL. OPTIONAL CAL. OPTIONAL OPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochure without prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-17.00 Rev A
2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com
Pressure, Level & Temperature Transmitters & Transducers Specifications reflect standard product, improved performance/mechanical options available. Modifications may alter specs, consult factory for more information. Accuracy
(Static error band includes non-linearity, hysteresis, non-repeatability) ±1.0% FSO (RSS) ±0.5% FSO (RSS) ±0.2% FSO (RSS)
Series A: Series B: Series C: Wetted Parts
117 3 mV/V 217 0 - 5 Vdc 317 4 - 20 mA 317Z 4 - 20 mA Intrinsically Safe
Type 316 & 15-5 ph stainless steel
ACCURACY (Series)
Temperature Limits * Compensated 0ºF to +180ºF Operating -20ºF to +250ºF (tip temperature)
A B C
Temperature Compensation * Zero Less than ±2.0% FSO/100ºF Span Less than ±2.0% FSO/100ºF Electricals Excitation Voltage (Model 117) 3.5-15 Vdc (Models 217) 9-40 Vdc (Models 317) 9-40 Vdc Output at 70° F (Model 117) (Models 217) (Models 317) Zero Balance (Model 117) (Model 217) (Model 317)
3.0 mV/V ±2% FSO 0 -5.0 Vdc ±2% FSO 4-20 mA ±2% FSO
Input Current (Model 217)
0.0 mV/V ±2% FSO at 70°F 0.0 Vdc ±2% FSO 4.0 mA ±2% FSO at 70°F
Burst Pressure Case Materials Weight Identification
50 75 100 150 200 250 300 500 750
RM RO RR RT RV RX RZ SZ
1,000 1,500 2,000 3,000 5,000 7,500 10,000 Other
Gauge Absolute Sealed Gauge (Hermetic) Sealed Gauge (non-hermetic)
Other Options Available Consult Factory
ALTERNATE CONNECTOR OR CABLE CA CE CF CH CJ CL CT CZ
PTIH-10-6P (Mate PT06E-10-6S [SR], not included) Terminal Block 1/2” NPT (M) thread with 36” potted leads Vented cable 8’ long (NEMA 4 termination) DIN 43650 connector (includes mate) 1/2” NPT (M) thread with 24” vented cable (for ranges less than 299 psi). Teflon jacketed cable, Tefzel used on submersible units (options CH, CL, CW, DE, GM) Other
GENERAL 2.0 mA maximum for less than 0.1% FSO attenuation. Greater than 10 megohms at 50 Vdc &70°F Infinite.
1.5 times full scale pressure or 12 kpsi whichever is less 5 times full scale pressure or 15 kpsi whichever is less Type 316 stainless steel 8 oz. nominal Etched stainless steel nameplate welded to body.
Connections Pressure
PV PX PZ RB RD RE RF RH RK
OPTIONS
Load Impedance (Model 117) 50,000 ohms minimum for less than 0.1% FSO attenuation. (Model 317) 1350 ohms max. at 36 Vdc & 750 ohms max. Vdc
Insulation Resis. Resolution Mechanicals Proof Pressure
PRESSURE RANGE (PSI)
2 3 6 7
8 mA nominal
Output Current (Model 317)
1.0% FSO 0.5% FSO 0.2% FSO
PRESSURE TYPE
Input Impedance (Model 117) 350 ohms nominal
3/4” - 16UNF-3A thread with Teflon O-ring with retaining rim (included)
Electrical * Cable (Model 117, 217) 6 conductor, 24 AWG 36” long (Model 317) 4 conductor, 24 AWG 36” long
●
Example: 317-B-PZ-2-CA
●
DE GA GB GE GG GH GJ GK GP HC HL HX JG GX GZ
Submersible housing, 8’ non-vented submersible polyurethane jacket cable, neoprene grommet,1/2” NPT (M) conduit. IP-67 (NEMA-6) vented polyrethane jacket cable, neoprene grommet. Standardized output to ±0.5% FSO Alternate pressure range, pressure units, or full scale outputs that are non-standard Improved temperature compensation to ±0.5% FSO/ 100ºF for zero and span respectively Alternate shunt calibration signal Internal shunt calibration resistor set to 100 ±0.5% FSO unless otherwise specified Zero & span adjust. (~ ±20% FSO). Not on Model 117 Inconel thread and diaphragm Hastelloy thread and diaphragm Integral o-ring groove. Includes Teflon 0-ring. (Eliminates need for O-ring retaining ring) RFI protection (For unit in proximity to radio transmitter) Hastelloy diaphragm only Viton O-ring Mineral oil fill Customer special
Mating Electrical Connector: Mating Electrical Connector Assembly:
ORDERING GUIDE: MODEL ACCURACY RANGE
CW
MODEL 17 ACCESSORIES
*See modifications on ordering guide.
●
MODEL
TYPE
OPTIONS
●
●/●/●
PN# MEC - Connector Code* PN# MECA - Connector Code - Output Code - Shunt Calibration Code - wiring Code - Cable Code*
PN# Material Weld Nipple WN17 AA(316 SS) Weld Plug WP17 AA(316 SS) O-Ring with OR17 AA(Teflon) Retaining Ring *Consult factory for option code.
Seal Type Pressure Port AA (Retaining Ring) AA (3/4” - 16 UNF-3B) AA (Retaining Ring) AA (3/4” - 16 UNF-3A) AA (Retaining Ring)
2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com