Dear SLP Customer, Riding a UTV is as much about the journey as the destination. And making the journey more exciting is what we specialize in. Whether your journey takes you through the deep dark woods, up a twisty mountain trail, onto the scorching sands, into the deepest mud holes or across the nastiest rocks this earth has to offer, we can help. We have many new and exciting products that add protection, performance and comfort scattered throughout the pages of this catalog. Please feel free to contact one of our knowledgeable representatives with any questions you may have. Always Ready to Serve, The Starting Line Products Crew
RZR Doors
2008-10
Polaris 570 RZR, 800 RZR, RZR-S and RZR XP 900 for
SLP’s RZR Doors partially enclose the cab area to help keep dust, dirt, mud, and water out. Our unique hinge design allows the door to be easily removed. These doors use a rear mounted hinge with the latch in the front for ease of entry and exit. The springloaded interior latch assembly allows quick and easy access with only a light push or pull required on the door to latch it closed. Designed to provide the operator and passenger a more comfortable off-road experience, these doors utilize a lightweight tube frame design with plastic hard side. Sold per pair. PART # 67-144 67-122 67-122
DeSCRiPTion 2008-10 RZR and RZR-S 2012 570 RZR 2011-12 800 RZR and RZR-S 2011-12 RZR XP 900
raphic Door G ming Kits Co n Soo !
2011-12
PRiCe/PAiR 429.00 429.00 429.00
Part # 67-144 now utilizes the same popular interior latch design as part # 67-122.
3
Rocker Armor™ for Polaris RZR SLP’s Rocker Armor™ protects the underside of the Polaris RZR against rocks and other hard objects without losing valuable ground clearance. Made RZR 900 XP Rocker Armor of high-tensile steel for superior strength. They slide easily over sharp rocks and are extremely resistant to gouging. The protection area covers from wheel well to wheel ated well and they are powder Integr ank T l e Fu coated for maximum durability. InR XP Z (R Guard ). cludes mounting hardware and inly 900 on stallation instructions. Sold per pair. PART # 67-100 67-103 67-109 67-110 67-126 67-127 67-145
DeSCRiPTion 570/800RZR and RZR-S 570/800RZR and RZR-S 800 RZR-4 800 RZR-4 RZR XP 900** RZR XP 900** RZR-4 XP 900
CoLoR PRiCe/PAiR Silver and Black 255.00 Black Texture 255.00 Silver and Black 479.00 Black Texture 479.00 Silver and Black 299.00 Black Texture 299.00 Black Texture TBA
*Free freight is available for ground service only on SLP’s choice of carriers. **RZR 900 Rocker Armor has an integrated fuel tank guard.
4
RZR/RZR-S Rocker Armor
800 RZR-4 Rocker Armor
ight* Free Fre to Lower s 48 State
Performance Slip-on Silencer for Polaris 800 RZR This performance slip-on silencer for the Polaris RZR is designed for maximum airflow without substantially increasing sound level output. It provides a 79% increase in airflow over the stock silencer. This results in a substantial performance improvement, showing better throttle response as well as top-end horsepower. The sound levels are within 2 decibels of stock (90 dBA on SAE J1287 test) for a trail friendly performance silencer. It also features a removable Forest Service approved spark arrestor. PART # 09-106
DeSCRiPTion 2008-12 Polaris 800 RZR, RZR-S and RZR-4
PRiCe 279.95
Super Silent Muffler for Polaris 800 RZR, RZR-S and RZR-4 This muffler for the Polaris RZR is an incredible 5 decibels quieter than stock while providing a 41% increase in airflow (20 more cfm) for more power. The subtle sound of this muffler provides a relaxing environment for the rider and passenger to carry on a conversation easily while under way, not to mention the benefit to others in the surrounding area. Whether you are using your RZR to get you in and out of your favorite hunting spots, or just want to have a more enjoyable ride with less noise, this muffler is perfect for you. PART # DeSCRiPTion 09-108 2008-12 Polaris 800 RZR, RZR-S and RZR-4
PRiCe 355.95
Features a removable Forest Service approved spark arrestor. note: 2009 standard RZR will require the rear differential stabilizer bracket to be changed to the 2010 rear differential stabilizer bracket (Polaris Part number 3235062).
ter on 5 dB quie 87 S A E J1 2 ry a n o stati 300 RPM test @ 3
5
Performance Slip-on Muffler for Polaris RZR XP 900 and RZR-4 XP 900 This new slip-on silencer for the Polaris XP 900 RZR delivers well over double the airflow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 91.5 DB using the SAE J 1287 sound test. It also includes a spark arrestor that can be added for trail use.
PART # 09-109
DeSCRiPTion 2011-12 RZR XP 900 and 2012 RZR-4 XP 900
Have you seen PowerSports Adventures? For the second year in a row we have teamed up with the television show PowerSports Adventures as their title sponsor. Every episode combines motorsports action with outdoor recreation while showing some of the latest products for your RZR in action. If you haven’t taken the opportuninty to see this show we encourage you to tune in and watch the next episode. It can be found on the Pursuit Channel (DirectTV channel 608 or DishNetwork channel 240) or on the Altitude Sports and Adventures Channel (DirectTV channel 681 or DishNetwork channel 410). If using another TV provider check your local listings. Visit our website (www.startinglineproducts.com) and click on the PowerSports Adventures link to learn more or to watch previous episodes.
6
PRiCe 475.00
Front Bumper kit for Polaris 570 RZR, 800 RZR, RZR-S,
RZR-4, XP 900 RZR & XP 900 RZR-4 Whether bajaing down a nasty trail or creeping across rocky, rugged terrain, this bumper kit protects well against the gnarliest conditions. Made of 1 3/8” x .095” wall DOM for strength then powder coated for a great look and maximum durability. It also features two anchor points for D-Rings, as ight* well as mounting points for Baja Free Fre Lights. Kit includes all mounting to Lower s hardware and installation instruc48 State tions.
2008-10
note: This kit mounts to factory upper mounting location on RZR 570/800 models . To increase strength of this mounting position, use SLP High Strength Upper Mount Kit (part #67-129) see page 8. PART # 67-101 67-104 67-123 67-125
DeSCRiPTion 2008-10 Silver and Black 2008-10 Black Textured 2011-12 Silver and Black 2011-12 Black Textured
PRiCe/kiT 400.00 400.00 350.00 350.00
2011-12
*Free freight is available for ground service only on SLP’s choice of carriers. 7
High Strength Front Bumper Upper Mount kit / Radiator Support for
Polaris 570/800 RZR, RZR-S and RZR-4
This kit replaces the stock radiator mount bracket that also acts as an upper mounting point for most bumpers. It is made of high-strength steel that has been reinforced so that it can take more impact in the event of a crash without the bumper folding into and damaging the radiator and other front-end components. Compatible with most factory and aftermarket front bumpers.
Front Skid Plate for
Polaris 570/800 RZR, RZR-S and RZR-4
This skid plate covers the area between the SLP Front Bumper and the stock center plastic skid plate, which is the section of frame where the aarms mount. It is made from high-tensile strength steel to protect against rocks and other hard objects without losing valuable ground clearance. This material slides easily over sharp rocks and is extremely resistant to gouging. PART # 67-130
8
PRiCe/kiT 35.00
PART # 67-129
PRiCe/kiT 75.00
Rear Bumper kit for 2008-12 Polaris
800 RZR, RZR-4 and 2011-12 800 RZR-S
This rear bumper kit is a must for any RZR owner! In stock form there is no protection for the rear of the vehicle. This kit protects your investment, looks great, and opens up additional storage area. It incorporates a rear tire mount, freeing up trunk space to haul the necessary gear so you can fully enjoy your outdoor experience. It also features a flag mount. Made of 1 3/8” x .095” wall DOM for strength then powder coated for a great look and maximum durability. Kit includes all mounting hardware and installation instructions.
noT for 2009-10 RZR-S. PART # 67-102 67-105
DeSCRiPTion Silver and Black Black Textured
PRiCe/kiT 375.00 375.00
ight* Free Fre to Lower s 48 State
Tire not included.
*Free freight is available for ground service only on SLP’s choice of carriers.
Trailing Arm Guards for Polaris XP 900 RZR/RZR-4 Made out of UHMW plastic for super strength and wear resistance, these trailing arm guards provide great protection in all conditions, but especially in the rocks where they slide easily over hard surfaces. They compliment the use of our Rocker Armor (page 4). PART # 67-137
PRiCe/PAiR 250.00
9
Secure Storage Glove Box for Polaris RZR all models
This attractive aluminum glove box from SLP offers well-needed storage for the Polaris RZR. It is built with a strong aluminum body and faceplate that utilizes a keyed lock for securing your valuables. The position that it is located in provides the passenger easy access to this storage, which is great for cell phones, cameras, small handguns, wallets, vehicle registration, etc. Also, it is weather resistant to protect your valuables. PART # 67-121 67-128
DeSCRiPTion Polished Aluminum Black Texture
PRiCe/kiT 155.00 155.00
Billet Gas and Brake Pedal Covers Polaris 570/800 RZR, RZR-S, RZR-4 and XP 900 RZR and RZR-4
for 2009-12
These billet pedal covers bolt to the stock steel pedals to give you a trick billet look as well as increased performance. The stock gas pedal will not reach full throttle without turning your foot sideways to force the pedal down to full throttle. The additional height of this billet gas pedal comfortably gives you the extra 7% throttle opening the stock pedal lacks. This allows you to comfortably achieve full throttle every time you desire it. The unique pattern on these pedals provides the PART # PRiCe/SeT proper amount of grip on the bottom of your foot. 67-138 84.95 Sold per set. Will not fit 2008 models.
10
Shown with pedal covers installed on stock levers. Levers not included
Universal 1/2” D-Ring This Universal D-Ring can be mounted to the SLP front bumper mounts and gives your RZR a rugged offroad look while adding easy access to winch or tie down points (fits perfectly on the points of the SLP Front Bumper). Load rated at 4,000 pounds and galvanized for strength and durability. Requires a 5/8” hole for D-Ring pin, the D-Ring loop is 1/2” diameter. PART # 67-117
PRiCe/eA. 10.95
1/2” D-Ring and Stinger Combo for Polaris 570/800 RZR, RZR-S and 800 RZR-4 This D-Ring and Stinger Combo gives you a solid towing/pulling point on your RZR without risking damage to the frame or suspension. The D-Ring is load rated at 4,000 pounds and galvanized for strength and durability. The stinger is made from solid billet 6061 T-6 aluminum for a strong, lightweight and durable part. PART # 67-119
PRiCe/kiT 34.95
Will fit Class ii (1 1/4” x 1 1/4”) receivers.
11
Hood Grill / Radiator Vent kit for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent kit not only provides a trick new look but also delivers an additional 116% more air intake surface area to the radiator. This allows the radiator to more efficiently cool the engine while moving. Offered with honeycomb or oval pattern backer. PART # 67-135 67-140
Oval
Honeycomb
Description PRiCe/kiT Grill kit with honeycomb backer 59.95 Grill kit with oval backer 59.95
Lower Radiator Vent Grill with Hood Hold Down for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent grill with honeycomb pattern gives an awesome look while providing a positive hold down for the hood. PART # 67-139
12
PRiCe/kiT 49.00
Wheel Spacer kits for Polaris
RZR all models
These wheel spacer kits allow you to widen your RZR, RZR-S, RZR-4 or RZR XP 900 for more stability when running high speed tight trails/roads or crawling over the nastiest rock piles. It does so by giving you an additional 7/8” or 1 3/4” width per side (1 3/4” or 3 1/2” overall). These wheel spacers utilize a locking ring (also known as Hub Centric) that fits precisely into the wheel to provide maximum strength, durability and proper balance. This locking ring locks the wheel to the spacer and by doing so places the majority of the stress on the wheel spacers themselves rather than on the studs alone. Also, by ensuring the wheel is centered with this Hub Centric ring, proper balance is maintained. They are manufactured from high quality billet aluminum and are precision CNC machined to ensure perfect fit and proper balance. These wheel spacers can be used on all RZR models with some limitations based on wheel offset and tire size, see our recommendations below. Simple bolt on installation with no permanent modifications required. Sold per pair. 7/8” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular applications are RZR-S, RZR-4 and RZR XP 900 models to give them more stability. They also work great on standard RZR models if using larger than 26” tires or aftermarket wheels with more offset than stock (this is the maximum width that can be used and still keep the tires from contacting the rear of the front fender well when turning and going through the bumps). They also allow the use of 12” wide rear tires on stock wheels without contacting the frame (standard RZR). 1 3/4” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular applications are standard RZR models using 26” PART # DeSCRiPTion PRiCe/PR tires or smaller and stock offset wheels. This provides the 67-142 7/8” Wheel Spacer Kit 104.95 standard RZR much more stability and they can be re67-143 1 3/4” Wheel Spacer Kit 124.95 moved easily to return to stock width for running 50” trails.
Sold per pair.
13
Gas Tank Armor for Polaris 570/800 RZR Gas Tank Armor is a must have for all 570/800 RZR, RZR-S, and RZR-4 owners. This product will keep rocks, sticks, and any other sharp objects from piercing the exposed rear portion of the gas tank. It is compatible with SLP Rocker Armor™ and is manufactured from 0.090” thick aircraft grade aluminum. PART # 67-112
DeSCRiPTion 570/800 RZR, RZR-S & RZR-4
PRiCe/kiT 54.00
*For fuel tank protection on the RZR XP 900, see our Rocker Armor™ on page 4.
Mud Guard for Polaris 570/800 RZR The Mud Guard will keep rocks, sticks, and any debris from building up in your undercarriage on the driver side of your vehicle. It’s compatible with SLP Rocker Armor™ and is manufactured from 0.090” thick aircraft grade aluminum. Fits all 570/800 RZR, RZR-S, and RZR-4.
67-113 Pictured
PART # DeSCRiPTion PRiCe/kiT 67-113 2008-10 800 RZR and RZR-S 62.00 67-114 All 800 RZR-4, 74.00 2011-12 570/800 RZR and RZR-S
Highly recommended for use with Rocker Armor.
14
Power Commander V from Dynojet The Power Commander V fuel controller from Dynojet gives you full EFI tuning capability. It plugs into the stock ECU and allows you to add or subtract fuel from the stock ECU settings. It is based on a throttle position verses RPM fuel map with input points at ten different throttle positions and in 250 RPM increments to give you pinpoint accuracy. SLP has created maps to optimize performance and fuel economy for specific combinations. These fuel maps can be preprogrammed into the controller at no charge for true plug and play capability. For the experienced tuner, the controller comes with a computer link cable and software for custom mapping capabilities. No wiring modiPART # DeSCRiPTion PRiCe fications are required (OEM style con70-124 2008-10 Polaris 800 RZR, RZR-S and RZR-4 379.95 nectors are supplied) and no 70-141* 2011-12 Polaris 800 RZR, RZR-S and RZR-4 399.95 permanent changes are made to your 70-142* 2011 Polaris RZR XP 900 399.95 stock system. 70-147* 2012 Polaris RZR and RZR-4 XP 900
399.95
* Note: These models (part numbers 70-141, 70-142 and 70-147) have the ability to manipulate ignition timing and Rev-Xtend capabilities.
Power Commander Accessories for Experienced Tuners SLP offers many tuning aids to help experienced tuners make their own maps. Please inquire or visit our website for more information.
PART #
DeSCRiPTion
PRiCe
PART #
DeSCRiPTion
PRiCe
PART #
DeSCRiPTion
70-136
LCD Display
299.99
70-132
Wideband 2
499.00
70-126
Autotune
70-135
1GB SD Card
15.95
70-134
CAN Cable
17.00
PRiCe 279.99
15
ergonomic Grab Handle with Wrist Restraint for Polaris RZR, RZR-S, RZR-4 and RZR XP 900 This grab handle is built for comfort and safety! Its curved design places hands in a natural position for a more comfortable ride for the passenger. It features Wrist Restraints which keep hands positioned on or near the grab handle in the case of a roll over. The adjustable straps allow these restraints to be used by adults or children. The natural tendency in a roll over situation is to let go of the grab handle and put your hand out to catch the vehicle. When using these restraints, the passenger is reminded to keep their hands firmly planted on the grab handle. PART # 67-116 67-115
DeSCRiPTion Ergonomic Grab Handle with Wrist Restraint for 2008-11 models Wrist Restraint Only for 2008-12 models (only works with stock grab bar)
PRiCe/kiT 79.00 14.99
Clutch Vents for Polaris 800 RZR, RZR-S and RZR-4 These clutch vents are installed into the clutch cover to allow more air to flow into the clutch enclosure to reduce clutch and belt heat and help maintain proper performance. It utilizes a special pre-filter material that repels water and keeps dirt out yet maintains high airflow. Sold in a set of 2 vents.
16
PART # 67-108
PRiCe/PAiR 49.95
TeAM Tied Driven Clutch for Polaris RZR This secondary clutch allows you to change helixes and springs to get the most performance out of your RZR. The stock secondary clutch that comes on the 2009 and newer Standard RZR as well as 2010 and newer RZR-S and RZR-4 is an inexpensive model that has the helix cast into the moveable sheave of the clutch. Changing to this clutch allows you to use a helix that is more suitable to your RZR's setup and typical riding conditions. Sold as a complete assembly less helix and spring. For a custom SLP recommendation that is specific to your combination, please call or e-mail (slp@slp.cc) an SLP representative and have the following information available: elevation you typically ride at, conditions you plan on riding in (i.e.: sand, snow, mud or typical trail), tire size, engine modifications that add power, and the weight PART # DeSCRiPTion PRiCe/eA. you have added to your vehicle. Clutch kits available for 50-301 RZR Driven Clutch 249.00 most popular applications, see pages 18 and 19.
Multi-Angle Driven Clutch Helixes for Polaris RZR These helixes make the RZR more responsive in all conditions and much less prone to RPM and topend power loss in higher load conditions (sand, snow, mud etc.) as well as at higher elevations and when running larger, more aggressive tires. note: Many RZR models came with a clutch that had the helix cast into the moveable sheave. On these models, the helix is non-replacePART # DeSCRiPTion PRiCe/eA. able (2009 and newer Standard RZR as well as 50-300* 70-58.33 79.00 2010 and newer RZR-S and RZR-4 800). These 50-302* 52 Straight 79.00 models must use the TEAM Tied Clutch shown 50-330 54 Straight 99.00 above in order to change the helix. *Will not fit 900 XP RZR
17
Clutch kits for Polaris RZR SLP clutch kits have been designed and tested to get the most performance out of your RZR. We have been working with centrifugal clutches for over 40 years, and we know how to tune them to transfer your horsepower to the ground. In most circumstances, optimizing the clutch setup in your RZR is the best performance gain for the dollar spent. Through our testing we have found that the RZR needs two distinctly different clutch setups depending on what type of terrain that you are riding in. Trail Clutch kit: The SLP Trail Clutch Kit is designed for RZRs that are typically ridden on semi hard surface trails with the occasional run in muddy or sandy conditions. These Trail Kits have been designed for RZRs running standard size tires with stock engines. They provide improved throttle response with better top end power and consistency over a broad range of elevations and conditions. If aftermarket performance modifications and/or larger or more aggressive tires have been added, please let us know so we can tailor your clutch kit accordingly. Sand, Mud or Large Tire Clutch kit: The SLP Sand, Mud or Large Tire Clutch Kit is designed for RZRs that are primarily ridden in high load environments such as sand dunes, sandy, muddy or snow covered trails, or on models that have added larger more aggressive tires (up to one inch larger than stock). When exposed to these high load conditions, RZR’s with stock clutching perform poorly, leaving the vehicle with poor throttle response and loss of RPM at wide open throttle. In many cases the operator has to shift prematurely to low range which reduces wheel speed and performance. These clutch kits match the power of the engine with the higher loads being applied to it to keep the throttle response snappy and top end RPM and horsepower at their peak for a much more enjoyable ride. If aftermarket performance modifications have been added, or if you are running paddles or tires even larger than specified above, please let us know so we can tailor your clutch kit accordingly. For clutch kit application chart, see the next page.
18
Clutch kit Application Chart for Polaris 800/900 RZR elevation
0-4500’
Model
Part #
Price
0-4500’ Sand, Mud or Larger Tires Part# Price
Description
Trail kit
4500’ +
Part #
Price
4500’+ Sand, Mud or Lager Tires Part# Price
2008 Standard RZR 800*
41-700
233.85
41-800
233.85
41-701
233.85
41-801
233.85
2009-10 Standard RZR 800* 41-702
482.85
41-802
482.85
41-703
482.85
41-803
482.85
2009-10 RZR-S 800
41-704
482.85
41-804
482.85
41-705
482.85
41-805
482.85
2010-11 RZR-4 800
41-706
482.85
41-806
482.85
41-707
482.85
41-807
482.85
2011-12 Standard RZR 800* 41-708
482.85
41-808
482.85
41-709
482.85
41-809
482.85
2011-12 RZR-S 800
41-710
482.85
41-810
482.85
41-711
482.85
41-811
482.85
2011-12 RZR 900
41-712
223.95
41-812
347.90
41-713
223.95
41-813
347.90
Trail kit
note: 2008 and 2009 Standard RZR 800 models require shimming for proper belt clearance. Shims and instructions included. * Requires RZR-S belt Polaris Part #3211133.
Tech Tip: A question we often hear is, “What RPM should I expect my RZR to run at wide open throttle?” This depends on the RZR Stock exhaust Descritpion WoT RPM ReV Limit Configuration you have. The following chart 2008-10 Standard RZR 800 2 into 1 Manifold 6200-6400 6500 shows you where we like to rev 6300-6500 6750 the different RZR engines at wide 2009-12 RZR-S/ RZR-4 800 Header 2011-12 Standard RZR 800 Header 6300-6500 6750 open throttle (WOT) as well as where their REV-Limiters are. 2011-12 RZR 900 XP Header 8000-8400 8750 19
SLP MTX™ Clutch Weights for Polaris
800 RZR except 900 XP
SLP's MTX™ Clutch Weights harness the horsepower of your RZR, RZR-S and RZR-4 by transferring it more efficiently to the wheels. Their unique heavy heel and special weight profile provide substantially greater shift force, delivering improved acceleration and top speed. Other benefits include smoother engagement and very responsive back shift. Adjustable by adding weight via rivets (up to 6 grams per weight), this weight offers precise tuning ability for your application. RePLACeMenT TUninG RiVeTS, Please inquire for recommendations. Sold per set of 3 including PACkAGe oF 6 tuning rivets (6 - 1 gram, 6 - 2 gram and 6 - 3 gram rivets). PART # MATeRiAL WeiGHT PRiCe/SeT PRiCe/SeT PART # WeiGHT 40-90 aluminum 1 gram 9.95 104.95 40-129 62 gram 40-91 steel 2 gram 9.95 40-130 65 gram 104.95 40-92 steel 3 gram 9.95 2008-09 Standard RZR requires reshimming. Rivet Set/Removal tool see page 23.
Rooster Adjustable Shift Weights for Polaris 900 RZR and 900 RZR-4
Get the HP to the ground on your RZR XP 900 with our adjustable Rooster Weights! They allow you to add the included bolts and washers to the weights at three different positions, the heel, center, and tip of the weight, to fine-tune your clutching. They are adjustable from 50 to 70 grams with included bolts and washers. This kit utilizes two different thicknesses of washers and three different weights of bolts for the ultimate in adjustability. Inquire for recommendation. PART # DeSCRiPTion 40-131 Rooster Adjustable Shift Weights (50-70 grams)
20
PRiCe 199.00
Drive Spring for Polaris 570/800/900 RZR These high quality clutch springs are offered in a variety of spring rates to allow you to optimize the shift characteristics of your drive clutch. Things such as elevation and tire size can have a dramatic effect on the performance of your RZR. Ask a representative for more information regarding your specific application. Part #
Color
40-404 40-400 40-401 40-402 40-403
Red Red Red Red Red
Stripe Color Compression Rate- Pounds @2.25” @1.25” Gold 25 175 Gold/Black 55 225 White/Black 65 245 Green/Black 75 260 Gold/Silver 105 260
Price/ea. 24.95 24.95 24.95 24.95 24.95
Driven Spring for Polaris 570/800/900 RZR This high quality clutch spring allows you to optimize the shift characteristics of your driven clutch. Things such as elevation and tire size can have dramatic effect on the performance of your RZR. Ask a representative for more information regarding your specific application. Part # 40-420 40-421
Color
Compression Rate- Pounds @2.05” @1.05” Red 105 165 Lime Green/ Silver 125 190
Price/ea. 24.95 24.95
21
SLP Clutch Press Tool SLP Clutch Press Tool has been widely accepted as the most efficient clutch compression tool available. This revolutionary drive and driven clutch servicing tool is designed specifically for compressing and holding springs for ease of assembly and disassembly. These tools are specified in many factory repair manuals as a required specialty tool for clutch compression. Wrestling with the clutch or need for a second person to help is now history. Made compact, the SLP tool can be used for field testing or production clutch repair on the shop bench. High quality metal construction with powder coated finish provides a quality, functional tool that is extremely durable. This design incorPART # DeSCRiPTion PRiCe/eA. porates adjustable stand-offs that can be 20-204 Polaris Drive/Driven Clutches (Including ATV, 99.95 moved in and out to allow proper fit for many P2, TEAM Rapid Reaction and Tied Clutches) different clutches.
Drive Clutch Spider Tool for All Polaris 800/900 RZR This Spider Tool allows the spider assembly in the drive clutch to be removed and assembled in order to service the rollers and buttons. It is made of high quality steel to precise specifications, allowing you to remove or install PART # PRiCe/eA. even the most stubborn spiders easily. 20-75
47.95
Drive Clutch Spider nut Tool for Polaris 900 XP This spider nut tool was specifically designed to remove the jam nut that locks the spider into place on the XP 900.
22
PART # 20-214
PRiCe/eA. TBA
Not Actual Picture
Cam Arm Bushing Replacement Tool Replace worn MTX™ clutch weight bushings to maintain best performance. Reduce wear on weights and rollers due to worn bushings. PART # 20-1 40-28 40-200
DeSCRiPTion Bushing Tool Replacement Bushing/ ea. Replacement Bushings, 3 pack
PRiCe/eA. 6.95 5.25 15.00
MTX™ Rivet Set/Removal Tool This tool allows you to fine tune your MTX™ Weights quickly and easily by setting or removing rivets. Specifically designed to be used in the field (but can be clamped in a vise for shop use) it is compact and lightweight, yet robust enough to be used time and time again. PART # 20-155
PRiCe/eA. 52.95
Drive Clutch Pullers for Polaris 570/800/900 RZR These clutch pullers are designed to pull even the toughest of clutches. Made of high quality heat treated material, these tools are built to last. PART # 20-207 20-136
DeSCRiPTion 570 RZR and 800 RZR, RZR-S and RZR-4 XP 900 RZR and RZR-4
PRiCe/eA. 28.95 36.95
#20-207
#20-136
23
Sheave Clamp Tool for Polaris 800/900 RZR The sheave clamp tool holds the moveable sheave of the drive clutch in place when collapsed for changing clutch weights without removing outer cover or clutch from crankshaft. An PART # PRiCe/eA. absolute must for field tuning. 20-161 7.95
Drive Clutch Holding Fixture for
Polaris 800/900 RZR
This Drive Clutch Holding Fixture can be bolted to a bench or clamped in a vise for solid holding of drive clutch for spider removal when shimming for belt-to-sheave clearance or servicing the spider. It contacts all clutch webs for maximum support to eliminate clutch web damage. Features a quick spin thumb nut with knurled edge for superior grip and center hold down for much greater PART # PRiCe/kiT holding stability while applying off center torque. 20-162 79.95
Clutch Holding Tool This premium tool offers the proper method to hold the drive clutch from rotating while removing or torquing clutch center bolt or when using a clutch puller. Unlike other clutch holding tools that are laser cut, this tool won’t hardmark or damage clutch, making it a far superior tool. It also features a cushion grip for PART # DeSCRiPTion comfort. This tool is a must for quick and 20-202 Polaris RZR easy clutch removal.
24
Will not hard mark clutch like other tools.
PRiCe/eA. 34.95
Tool Bag Handy roll-up style bag holds enough tools for trail riding or racing, and includes a zipper pouch for small tools. PART # 46-52
extension Spring Hooks Special tool made for installing and removing all exhaust system springs or any spring that requires a pull to release. Made of stainless steel for strength and rust resistance.
PRiCe/eA. 19.95
SiZe 4” 6” 8” 12”
PART # 20-89 20-90 20-183 20-210
Tools not included
PRiCe/eA. 10.95 11.50 11.95 12.95
Miniature Water Temperature Gauge Monitor water temperature easily with these new miniature gauges. The gauge can be set to read in either Fahrenheit or Celsius. It registers the current temperature and records maximum temperature. The display can be mounted either with its Peel-N-Stick backing or bolted on. Come standards with either a ¾” PART # DeSCRiPTion or 1” hose splice adapter.
19-103 3/4” (19mm) Hose I.D. Size 19-104 1” (25mm) Hose I.D. Size Polaris RZR uses 1” hose
PRiCe/eA. 44.95 44.95
25
SLP Team Hat This attractive newly designed hat features a 3D embroidered SLP logo on the front of the hat with EST. 1972 on the brim. Adjustable rear closure for one size fits most. This new hat was specifically designed with the hot summer months in mind. It utilizes a lightweight breathable fabric shell with a moisture wicking band to provide maximum comfort even on the hottest days. Adjustable rear closure for one size fits most. PART # 60-59 60-58
DeSCRiPTion Black Summer Grey
PRiCe/eA. 21.95 24.95
SLP Team Beanie For those cold days try one of our SLP Beanies. This newly designed beanie features a woven logo with embroidered lettering for a great new look. Lined with Thinsulate™ insulation to keep your head and ears warm and comfortable. One size fits most. PART # 60-49
26
PRiCe/eA. 19.95
# 60-55 # 60-57
SLP Decals
Our SLP Logo is on high quality 3M Transfer material which is great for your RZR, truck or trailer. PART # 60-41 60-12 60-55 60-8 60-9 60-57
DeSCRiPTion 2-1/4” x 1-1/4” Logo, per each 7” x 3” Logo, per each 7 1/2” x 3 1/2” Oval Logo 11 1/2” x 4” Logo, per each 18” x 9 1/2” Logo, per each 39” x 18” Oval Logo
PRiCe/eA. .22 .95 .95 3.00 7.29 25.95
# 60-12 # 60-8 # 60-9
inDeX Autotune...........................15 Beanie..............................26 Brake Pedal Covers.........10 Bumper, Front....................7 Bumper, Rear.....................9 Bushing Tool, Cam Arms..23 Clutch Holding Fixture......24 Clutch Holding Tool..........24 Clutch Kits...................18-19 Clutch Press Tool.............22 Clutch Pullers...................23 Clutch Spider Tools..........22 Clutch Vents.....................16 Decals..............................27 Doors.................................3
D-ring................................11 Drive Spring......................21 Driven Spring....................21 Front Bumper Support........8 Front Skid Plate..................8 Gas Tank Armor................14 Gauges........................15,25 Glove Box.........................10 Grab Handle.....................16 Half Doors..........................3 Hat....................................26 Helix.................................17 Hood Grill.........................12 Hood Hold Down..............12 Large Tire Clutch Kit....18-19
LCD Display......................15 Lower Radiator Vent.........12 MTX Rivet Removal Tool..23 MTX Weights....................20 Mud Guard.......................14 Muffler 800.........................5 Muffler 900.........................6 PCV..................................15 Power Commander...........15 Radiator Support................8 Radiator Vent Kit..............12 Rear Bumper Kit.................9 Rocker Armor......................4 Rooster Weights...............20 Sand Clutch Kit...........18-19
Secure Storage Box.........10 Sheave Clamp Tool..........24 Silencer 800.......................5 Silencer 900.......................6 Spring Hook Tool..............25 Stickers.............................27 Stinger..............................11 Super Silent Muffler............5 Team Tied Driven Clutch..17 Tool Bag...........................25 Trail Clutch Kit.............18-19 Trailing Arm Guards...........9 Water Temp Gauge Mini...25 Wheel Spacer Kit..............13 Wide Band 2.....................15
27
Change Service Requested
743 E. Iona Rd. Idaho Falls, ID 83401 (208)529-0244, www.startinglineproducts.com
PRSRT STD U.S. POSTAGE
PAID
PERMIT NO. 96 IDAHO FALLS, ID
For more information about these products or to place an order, please contact: Starting Line Products (208)529-0244 www.startinglineproducts.com
Scan this code with your smart phone and you will be directed to the UTV section of our website.