ORNAMENTAL IRON
DIVISION
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
SPEARS AND CAPS
18
6
SPO 656 H. 5-1/2” X W. 3-1/2” BASE: 1”OD 1/2” ID SQUARE .6 LBS.
SPO 656-XS H. 5” X W. 3-1/82” BASE: 7/8”OD 1/2” ID SQUARE .5 LBS.
SPO 659 H. 5” X W. 3-1/4” BASE: 1”OD 1/2” ID SQUARE .5 LBS.
SPO 659-XS H. 4-1/2” X W. 2-3/4” BASE: 1”OD 1/2” ID SQUARE .33 LBS.
SPO 9-RS H. 3-7/8” BASE: 7/8”OD 1/2” ID ROUND .25 LBS.
SPO 9-X H. 4-1/4” BASE: 1”OD 1/2” ID SQUARE .33 LBS.
SPO 9-A H. 4-3/8” BASE: 1”OD 1/2” ID SQUARE .33 LBS.
SPO 9-AXS H. 4” BASE: 1”OD 1/2” ID SQUARE .25 LBS.
SPO 9-XS H. 3-1/2” BASE: 1”OD 1/2” ID SQUARE .25 LBS.
SPO 649-XS H. 4” X W. 22” BASE: 1/2”OD 1/2” ID SQUARE .336 LBS.
SPO 649 H. 4-3/8” X W. 2-1/4” BASE: 1/2”OD 1/2”ID SQUARE .33 LBS.
SPO 658 H. 4-1/4” X W. 2-1/2” BASE: 1”OD PLUG: 3/8” X 5/8” .33 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 9-H H. 4-5/8” BASE: 1-1/8”OD 5/8” ID SQUARE .33 LBS.
SPO 217WB-Y H. 4-1/8” BASE: 1-1/16”OD 3/4” ID SQUARE .33 LBS.
SPO 667 H. 4-1/2” X W. 2-1/4” BASE: 1”OD 1/2” ID SQUARE .5 LBS.
SPO 667-XS H. 4” X W. 2-1/4” BASE: 1”OD 1/2” ID SQUARE .25 LBS.
SPO 668 H. 7-1/4 x W. 3” BASE: 1“ OD 1/2” ID Square .75 LBS.
SPO 825-Lance H. 4-3/4” BASE: 1-1/4“ OD 1/2” ID SQUARE .5 LBS.
SPO 649-H H. 4-3/4” X W. 2-1/4“ BASE: 1”OD 5/8” ID SQUARE .5 LBS.
SPO 844 H. 5-1/4” X W. 2-1/4“ BASE: 1/2” SOLID SQUARE .5 LBS.
SPO 853 H. 4-5/8” X W. 2-1/2“” BASE: 1-1/4”OD 1/2” ID SQUARE .5 LBS.
SPO 666-XS H. 5-1/4” X W. 2-3/8” BASE: 1-1/4”OD 1/2” ID SQUARE .5 LBS.
SPO 656-H H. 6” X W. 3-1/2” BASE: 1”OD 5/8” ID SQUARE .75 LBS.
SPO 848 H. 7-3/4” X W. 4-5/8” BASE: 1/2” ID SQUARE .2 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
7
© 2010 STEEL AND PIPES, INC.
SPEARS AND CAPS
18
ORNAMENTAL IRON DIVISION
SPEARS AND CAPS
18
SPO 666 H. 6” X W. 2-3/4“ .5 LBS. ALLOW FOR FLUSH KIT OF ...
© 2010 STEEL AND PIPES, INC.
SPO 9-RXL H. 5-1/4” X W. 2-1/2“ BASE: 3/4” ID ROUND .75 LBS.
SPO 8603 H. 4-1/4” X W. 2“ BASE: 1/2” ID ROUND .3 LBS.
8
SPO 9-R H. 4” X W. 1-3/4“ BASE: 3/4”OD 1/2” ID ROUND .33 LBS.
SPO 655-A H. 6-1/2” X W. 3-1/2” BASE: 1”OD 1/2” ID SQUARE 1 LBS.
SPO 8834 H. 6” X W. 3-1/24” BASE: 1-1/2”OD 3/4” ID ROUND 1.25 LBS.
SPO 649-Y H. 5-1/2” BASE: 1” OD 3/4” ID SQUARE .75 LBS.
SPO 9S SQUARE HOLLOW BASE FIT INSIDE SQUARE TUBE OF 1”
SPO 7-AXL 2” DIAMETER BALL H. 3-1/4” BASE: 1-3/4” SOLID 1.75 LBS.
SPO 812 H. 2” X W. 1“ BASE: 1”OD 1/2” ID SQUARE .25 LBS.
SPO 853-Y LEUR-DE-LIS H. 6-5/8” X W. 3-3/4” BASE: 2”OD 3/4”ID SQUARE 2 LBS.
SPO 8280 4 SIDED H. 5-3/8” PLUG 1-3/4” X 5/8” DEEP BASE: 1” 4 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 656-Y H. 7” X W. 4-1/4“ BASE: 1” OD 3/4” ID SQUARE 1.5 LBS.
SPO 832 SQUARE HOLLOW BASE FIT INSIDE SQUARE TUBE OF 1”
SPO 659-H H. 5-3/8” X W. 3-1/4” BASE: 1” OD 5/8” ID SQUARE 1 LBS.
SPO 671-AF H. 5” X W. 2” BASE: 1-1/4” OD 3/4” ID SQUARE 1 LBS.
SPO 647-SPEAR H. 5” X W. 2-1/4“ BASE: 5/8” SOLID .33 LBS.
SPO 9-XS-3/4 H. 4-1/4” BASE: 1-1/4” OD 3/4” ID SQUARE .33 LBS.
SPO 9-Y H. 6” BASE: 1-1/4“ OD 3/8” ID SQUARE 1.25 LBS.
SPO 661 4 SIDED ARROW POINT H. 4-1/4” PLUG: 1” X 1” DEEP .75 LBS.
SPO 9-Z 4 SIDED FLARE WITH BALL H. 8” BASE: 1-3/4“ OD 1”ID SQUARE 1.5 LBS.
SPO 7-BALL 1-1/2” DIAMETER BALL H. 2-1/2” BASE: 1“ SOLID SQUARE .75 LBS.
SPO 8-X H. 3” BASE: 1” SOLID .5 LBS.
SPO 649-X H. 4-1/4” PLUG: 1“ X 3/4” DEEP .75 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
9
© 2010 STEEL AND PIPES, INC.
SPEARS AND CAPS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
SPEARS AND CAPS
18
SPO 7-X 1” DIAMETER BALL H. 2-1/4 PLUG: 1“ X 3/4” DEEP .5 LBS.
SPO 117 LEMON DROP H. 3-1/4” PLUG: 1” X 1/4” DEEP 1 LBS.
SPO 8124 H. 2-1/4” X W. 1-1/4” BASE: 3/4“ SQUARE .5 LBS.
SPO STAR H. 3-1/2” X W. 1-1/4” OH PLUG. 1” X 1/2” DEEP OD 1 LBS.
SPO 7-A 1-1/2” DIAMETER BALL H. 2-1/2” BASE: 1-1/4” SOLID SQUARE .75 LBS.
SPO 812Z H. 2-1/2” X W. 1-1/2” BASE: 1” ID SQUARE .75 LBS.
SPO 7-XL 1-1/2” DIAMETER BALL H. 3-3/4” PLUG: 1-1/4” X 1-1/4” DEEP 1.25 LBS.
SPO 9-XL H. 6” X W. 2” BASE: 2-1/8”OD 1-1/4” ID SQUARE 1.75 LBS.
SPO 669 TASSEL SPEAR H. 8” BASE: 1” SQUARE 2 LBS.
SPO 670-CFY W. 4” X 6-5/8” OH PLUG: 3/4” X 1-3/8” DEEP 1 LBS.
SPO 649-Z H. 6-1/4” X W. 3-1/4” BASE: 1-3/4”OD 1” ID SQUARE 1.25 LBS.
SPO 120 NEWEL POST BALL 2” DIAMETER BALL H. 5-1/2” BASE: FITS OVER 3” TUBING 4 LBS.
10
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPEARS AND CAPS
18
SPO 119 SPO 118 NEWEL POST BALL NEWEL POST BALL 2-3/4” DIAMETER BALL 1-3/4” DIAMETER BALL H. 5-1/2” H. 3-3/4” BASE: FITS OVER 4” TUBING BASE: FITS OVER 2” TUBING 4 LBS. 2 LBS.
SPO 126 NEWEL POST BALL CAP BASE: 6” X 6” TUBING
SPO 657-Z H. 6” 4” SOLID BASE 8 LBS.
1”
1”
SPO 657 PINEAPPLE H. 4” X W. 2-1/2” BASE: 1-3/4” SOLID 1.5 LBS.
SPO 8805 H. 12” X W. 6” BASE: 3-1/2” X 5” OD 2-3/4” X 4-1/8” ID 7 LBS.
SPO 662 H. 8” X W. 2-3/4” FITS OVER 1” .75 LBS.
SPO 671 XL H. 8” X W. 1-1/2”
210.020 .1515 210.020 .01X1 210.020 .02X2 210.020 .04X4 210.020 .06X6
1/2”X1/2” 1”X1” 2”X2” 4”X4” 6”X6”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
11
© 2010 STEEL AND PIPES, INC.
CAST IRON CAPS
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
COLLARS AND BASES
18
SPO 251 FITS OVER 1/2” H. 2” X W. 1-3/4” 1/3 LBS.
SPO 251-H FITS OVER 5/8” H. 2” X W. 1-7/8” 1/3 LBS.
SPO 251-Y FITS OVER 3/4” H. 2” X W. 2” 1/2 LBS.
SPO 251-Z FITS OVER 1” H. 2.5” X W. 2.5” .75 LBS
SPO 8393 H. 9-1/2” 9-1/4”OD 48 LBS. FITS OVER 6”
SPO 8394 H. 8” 12”OD 48 LBS. FITS OVER 6”
SPO 8396 COLLAR H. 6” X W. 4-1/2” 7 LBS. FITS OVER 3” ROUND
SPO 8397 BASE H. 8-1/2” X W. 6” 17 LBS. FITS OVER 3” ROUND
SPO 8518 COLLAR FOR 1/2” .7 LBS.
SPO KK2 5” X 5” FOR 2”
SPO 9503 FOR 1/2”
SPO SS 1/2
12
SPO 234-112 FITS 1-1/2” SQ. OVER 3” BASE PLATE .85 LBS.
SPO LCS-250 BASE PLATES 3” X 3” FOR 1”
SPO 251 H HEX SPO 251 HEX SPO 251 Z HEX
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FITS OVER 5/8” SQ. FITS OVER 1/2” SQ. FITS OVER 5/8” SQ.
ORNAMENTAL IRON DIVISION
SPO CC COLLAR 2” DEEP BASE: 3.25” X 3.25” 1.5 LBS. FOR 1” TUBING
SPO BB COLLAR 1-3/8” DEEP BASE: 2-1/4” X 2-1/4” 1/2 LBS. FOR 1” TUBING
SPO RR COLLAR 1.25” DEEP BASE: 2-1/2” X 2-1/2” 1/2 LBS. FOR 1.25” TUBING
SPO HH COLLAR 2” DEEP BASE: 3-3/4” X 3-3/4” 1-3/4 LBS. FOR 1.5” TUBING
SPO EE COLLAR 1” DEEP BASE: 1-1/4” X 2-1/4” 1/4 LBS. FOR .5” SQUARE
SPO MM COLLAR 1-1/2” DEEP BASE: 1-5/8” X 3-7/8” 1/2 LBS. FOR 1” TUBING
SPO FF SHANK 1-1/4” DEEP BASE: 1-1/4” X 3” 1/4” LBS. FOR 1” TUBING
SPO XX SHANK 1” DEEP BASE: 1-1/8” X 2” 1/4 LBS. FOR 1” TUBING
SPO DD COLLAR 1-7/8” DEEP BASE: 1” X 1” 1/2 LBS. FOR 1” TUBING
SPO LL COLLAR 1-3/8” DEEP BASE: 1-5/8” X 2-3/4” 1/2 LBS. FOR 1” TUBING
SPO QQ COLLAR 2” DEEP BASE: 2-1/4” X 3-3/8” 1/3” LBS. FOR 1” TUBING
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
13
© 2010 STEEL AND PIPES, INC.
SHOES, BASES & FLANGES
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
14
SPO 85 BIRD OF PARADISE H. 24-3/4” X W. 8-1/8” 11.3 LBS.
SPO 1327 H. 33-1/4” X W. 8” 13 LBS.
SPO 82 BIRD OF PARADISE H. 22” X W. 8-1/2” 11 LBS.
SPO 81 H. 15.5” X W. 8.5” 7.5 LBS.
SPO 1325 H. 28-1/4” X W. 8” 9 LBS.
SPO 87A H. 27” X W. 9” 12 LBS.
SPO 1335 H. 33-1/4” X W. 8-3/4” 13.5 LBS.
SPO 1337 H. 33-1/4” X W. 8-3/4” 13.5 LBS.
SPO 84 H. 32” X W. 6-1/4” 10 LBS.
SPO 65X H. 27-3/4” X W. 7-3/4” 10 LBS.
SPO 65 H. 19-1/2” X W. 7” 6 LBS.
SPO 625 H. 30-1/2” X W. 8-5/8” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SPO 67 PONTALBA H. 28-1/2” X W. 8-1/4” 8.5 LBS.
ORNAMENTAL IRON DIVISION
SPO 7163 H. 26-7/8” X W. 6-1/4”
SPO 86 H. 26-1/2” X W. 10” 9 LBS.
SPO 630 H. 30” X W. 8” 10 LBS.
SPO 610 H. 28-5/8” X W. 7-5/8” 9.5 LBS.
SPO 6357 H. 28-1/2” X W. 9-1/4”
SPO 1345 H. 33-1/4” X W. 5” 10 LBS.
SPO 1300 H. 33-1/4” X W. 5” 8.75 LBS.
SPO 44 H. 31-1/2” X W. 6-1/4” 5.5 LBS.
SPO 96F PASSION FLOWER DESIGN H. 24-1/2” X W. 6-3/4” 8 LBS.
SPO 88 H. 30-3/8” X W. 8-1/4” 9 LBS.
SPO 7153 H. 23-1/2” X W. 15-1/8”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
15
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
16
SPO 150 WEDDING RING DESIGN H. 19-1/4” X W. 7-1/4” 4 LBS.
SPO 632 H. 23-3/4” X W. 11-1/2” 13 LBS.
SPO 680 H. 10” X W. 22” 6 LBS.
SPO 624 H. 28-1/4” X W. 11” 18 LBS.
SPO 675 H. 22” X W. 8” 8 LBS.
SPO 6028 H. 27-3/4” X W. 12” 14 LBS.
SPO 640 H. 27-1/2” X W. 7-1/2” 8 LBS.
SPO 9612 H. 27-1/4” X W. 6-3/4” 7 LBS.
SPO 6026 H. 22-3/4” X W. 8” 7 LBS.
SPO 9611 H. 28-3/4” X W. 11-3/4” 14 LBS.
SPO 9610(SBO) H. 29.5” X W. 9.5” 8.8 LBS
SPO 9600 H. 29-3/8” X W. 11” 24 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 7615 H. 27-5/8” X W. 4-5/8” 7 LBS.
SPO 7614 H. 27-5/8” X W. 4-5/8” 7 LBS.
SPO 9644 H. 29” X W. 3-1/2” 8 LBS.
SPO 9643 H. 29” X W. 3-1/2” 8 LBS.
SPO 89-A H. 29-3/4” X W. 4” 7 LBS.
SPO 8307 H. 28” X W. 2-1/2” 7 LBS.
SPO 8305 H. 31-1/4” X W. 2-1/4” 7.5 LBS.
SPO 9091 H. 28-1/2” X W. 5” 7.5 LBS.
SPO 9617 H. 28-1/4” X W. 7” 7 LBS.
SPO 58 23” X 20-1/4” 11 LBS.
SPO 56 17” X 16.25” 7 LBS.
SPO 852 14-1/4” X 17-3/4” 6 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
17
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
18
SPO 98B 14” X 14” 6 LBS.
SPO 98C 16” X 16” 8 LBS.
SPO 6027 17-3/4” X 17-3/4” 10 LBS.
SPO 16 9” X 17” 3.5 LBS.
SPO 10 21” X 21” 13 LBS.
SPO 10A 15-1/2” X 15-1/2” 5 LBS.
SPO 21 26-1/2” X 26-1/2” 20 LBS.
SPO 20A 21” X 21” 9 LBS.
SPO 28 21” X 21” 9 LBS.
SPO 222-B 16” X 16” 9.5 LBS.
SPO 41 9” X 17” 3.5 LBS.
SPO 96A 17” X 17” 7 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 80A 12” X 24-3/4” 13.5 LBS.
SPO 80B 21” X 21” 13 LBS.
SPO 80C 15-1/2” X 15-1/2” 8 LBS.
SPO 75B 16” X 16” 6.5 LBS.
SPO 70 9-3/4” X W. 18-3/4” 6.5 LBS.
SPO 74B 14-1/2” X 14-1/2” 5.5 LBS.
SPO 74-X 18” X 18” 8 LBS.
SPO 74A 16-1/2” X 16-1/2” 12.5 LBS.
SPO 40A 16” X 16” 5.5 LBS.
SPO 50 18-1/2” X 17-3/4” 10 LBS.
SPO 60 17” X 17” 7.5 LBS.
SPO 90 15” X 22-1/4” 6.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
19
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION
CAST IRON DESIGNS
18
SPO 79 H. 2-3/4” X W. 19” 3 LBS.
SPO 96D H. 4-3/4” X W. 19-1/2” 5 LBS.
SPO 96X H. 7-1/4” X W. 23-1/2” 9 LBS.
SPO 850 H. 4-1/2” X W. 19” 3 LBS.
SPO 9049 H. 7-3/4” X W. 30-1/2” 12 LBS.
SPO 9040 H. 6-3/8” X W. 31-1/4” 9.25 LBS.
SPO 62-X H. 6” X W. 23” 5.5 LBS.
SPO 27A H. 4-1/4” X W. 23-1/4” 5.5 LBS.
SPO 15A H. 6” X W. 26” 7 LBS.
SPO 80F H. 5” X W. 21-1/2” 6 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 229 H. 8” X W. 11”
SPO 220 H. 4-1/4” X W. 12-1/4”
20
SPO 24 H. 2-3/4” X W. 20-1/4” 4 LBS.
SPO 173 H. 7-1/2” X W.35-1/2”
SPO 163 H. 6-1/4” X W. 34-1/4”
SPO 83 H. 36-3/4” X W. 11-1/4” 16 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 8363-R H. 30-3/4” X W. 19” 35 LBS.
SPO 8503 H. 29” X W. 9-1/2” 14 LBS.
SPO 93 H. 23-1/4” X W. 9-1/4” 7.5 LBS.
SPO 7314 H. 14-1/8” X W. 3-7/8” 4 LBS..
SPO 68 H. 19” X W. 6” 7 LBS.
SPO 38 H. 15” X W. 10.5” 3.5 LBS.
SPO 38X H. 18-3/4” X W. 10-1/2” 5.5 LBS.
SPO 38XL H.24.25” X W.9.75” 9.5 LBS.
SPO 238 H. 19” X W. 9-1/2”
SPO 8325 10.5 DIAMETER 9.5 LBS.
SPO 708 H. 20-1/4” X W. 11-1/4” 18 LBS.
SPO 648 H. 27-5/8” X W. 15-1/2” 20 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
21
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
22
SPO 75 H. 27” X W. 7-7/8” 10 LBS.
SPO 78-A H. 25.5” X W. 8” 9.5 LBS.
SPO 74-C H. 28.25” X W. 8-5/8” 11 LBS.
SPO 79-C H. 25.75” X W. 10.25” 12 LBS.
SPO 79-A H. 21.75” X W. 7” 5 LBS.
SPO 7446 H. 34” X W. 5-1/2” 9 LBS.
SPO 7463 H. 31-1/2” X W. 6-3/4” 9 LBS.
SPO 7462 H. 29” X W. 6-3/4” 9 LBS.
SPO 89 H. 27-3/4” X W. 6” 10 LBS.
SPO 87 H. 29-1/2” X W. 6” 10 LBS.
SPO 89XL H. 30” X W. 6-5/8” 12 LBS.
SPO 8653(SF) H. 38.5” X W. 34.75” 42.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 693 H. 29-1/2” X W. 5-1/2” 8 LBS.
SPO 9628 H. 22-1/2” X W. 10-1/4” 9 LBS.
SPO 7519 H. 26.5” X W. 18” 33 LBS.
SPO 685-XS H. 20-1/4” X W. 13-1/2” 15 LBS.
SPO 685 H. 22-1/2” X W. 10” 9 LBS.
SPO 645 H. 26” X W. 10-1/4” 10 LBS.
SPO 631 H. 28-1/2” X W. 11-1/4” 15 LBS.
SPO 644 H. 23-1/2” X W. 9” 12 LBS.
SPO 9019 H. 26-1/4” X W. 11-1/2” 15.5 LBS.
SPO 13B H. 22” X W. 9” 5.5 LBS.
SPO 8502 H. 21” X W. 18.5” 15.5 LBS.
SPO 618 23” X 23” 14 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
23
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
24
SPO 619 17.5” DIAMETER 9 LBS.
SPO 9056 H. 28” X W. 12” 13 LBS.
SPO 9044 H. 26.75” X W. 16” 14.75 LBS.
SPO 697 H. 27.5” X W. 11” 10 LBS.
SPO 45A H. 26.25” X W. 8.5” 7.5 LBS.
SPO 856 H. 31” X W. 8.25” 7.5 LBS.
SPO 854 H. 19.25” X W. 7.75” 4.5 LBS.
SPO 858 H. 15.75” X W. 8.5” 3.5 LBS.
SPO 41 9” X 17” 3.5 LBS.
SPO 43 H. 18.5” X W. 8” 4.5 LBS.
SPO 46 H. 7.25” X W. 6.25” 1 LBS.
SPO 96 H. 17.5” X W. 8.5” 6 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 71 H. 27.25” X W. 10.75” 12 LBS.
SPO 98 H. 29” X W. 8” 9 LBS.
SPO 54 H. 30” X W. 10” 12 LBS.
SPO 74 H. 14.5” X W. 9” 5.5 LBS.
SPO 688 8.5” DIAMETER 5 LBS.
SPO 9021 H. 33.25” X W. 7.25” 10 LBS.
SPO 29 H. 27.25” X W. 8” 10 LBS.
SPO 222-AXL H. 27” X W. 8.5” 11 LBS.
SPO L424 H. 27.25” X W. 12” 18 LBS.
SPO 24-A H. 26” X W. 11-5/8” 12 LBS.
SPO L423 H. 20.5” X W. 8.25” 8 LBS.
SPO 22-A H. 21” X W. 8” 6 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
25
© 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
CAST IRON DESIGNS
18
26
SPO L411 H. 16.75” X W. 12.75” 10 LBS.
SPO 606 H. 24” X W. 10-1/2” 8.5 LBS.
SPO 6239 H. 14-3/4” X W. 14-3/4” 5 LBS.
SPO 64 H. 15-7/8” X W. 10-1/4” 3.5 LBS.
SPO 9043 H. 26-3/4” X W. 16” 16.25 LBS.
SPO 94 H. 16” X W. 8” 4 LBS.
SPO 20 22” X 22” 13 LBS.
SPO 22 H. 20-1/4” X W. 8” 6.5 LBS.
SPO 23A H. 16” X W. 16” 8.5 LBS.
SPO 27 H. 7-1/2” X W. 23-1/4” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
CIRCLE DESIGNS
18
SPO 8325 10-1/2” DIAMETER 9 LBS.
SPO 618(SF) 23” X 23” 14 LBS.
SPO 7510(SF) 15” DIAMETER 13 LBS.
SPO 14-XL(SF) 20” DIAMETER 18 LBS.
29”
SPO 618-A(SF) 3 LBS.
SPO 617(SF) 22-1/4” DIAMETER 27 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
27
© 2010 STEEL AND PIPES, INC.
21”
SPO 619(SBO) 17-1/2” DIAMETER 9 LBS.
ORNAMENTAL IRON DIVISION
OAK DESIGNS
18
SPO 222-B H. 16” X W. 16” 9.5 LBS.
SPO 222-A H. 15” X W. 9” 6.5 LBS.
SPO 8659 H. 33-1/4” X W. 9-1/8” FLAGE - 1/4” X 1” 20 LBS.
© 2010 STEEL AND PIPES, INC.
XL(SF) METER BS.
SPO 222-AXL H. 27” X W. 8-1/2” 11 LBS.
28
SPO 29 H. 27-1/4” X W. 8” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
ROSE DESIGNS
18
SPO 74-B H. 14-1/2” X W. 14-1/2” 5.5 LBS.
SPO 76 H. 17-3/4” X W. 8” 5 LBS.
SPO 79-B H. 21-3/4” X W. 7” 5 LBS.
SPO 76-S H. 12-1/4” X W. 8-1/4” 4 LBS.
SPO 75-A H. 21-1/2” X W. 21-1/2” 13 LBS.
SPO 688(SF) 8-1/2” DIAMETER 5 LBS.
SPO 79-C H. 25-3/4” X W. 10-1/4” 12 LBS.
SPO 78-A H. 25-1/2” X W. 8” 9.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
29
© 2010 STEEL AND PIPES, INC.
SPO 75-B H. 16” X W. 16” 6.5 LBS.
SPO 71 H. 14-1/2” X W. 10-3/4” 12 LBS.
ORNAMENTAL IRON DIVISION
ROSE DESIGNS
18
SPO 74-X H. 18” X W. 18” 8 LBS.
SPO 70 H. 9-3/4” X W.18-3/4” 6.5 LBS.
SPO 74-A H. 16-1/2” X W. 16-1/2” 12.5 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 79 H. 2-3/4” X W. 19” 3 LBS.
SPO 74 H. 14-1/2” X W. 9” 5.5 LBS.
30
SPO 74-C H. 28-1/4” X W. 8-5/8” 11 LBS.
SPO 75 H. 27” X W. 7-7/8” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
PASSION FLOWER DESIGNS
18
SPO 96-X(SBO) H. 7-1/4” X W. 23-1/2” 9 LBS.
SPO 96-D(SBO) H. 4-3/4” X W. 19-1/2” 5 LBS.
SPO 50 H. 17-3/4” X W. 18-1/2” 10 LBS.
SPO 96-F H. 24-1/2” X W. 6-3/4” 8 LBS.
SPO 96(SBO) H. 17-1/2” X W. 8-1/2” 6 LBS..
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
31
© 2010 STEEL AND PIPES, INC.
SPO 9047 H. 30” X W. 7-1/4”
SPO 96-C(SBO) H. 27-1/4” X W. 12” 15 LBS.
ORNAMENTAL IRON DIVISION
VINEYARD DESIGNS
18
14-1/2”
16-1/2”
SPO 18 H. 21-1/4” X W. 31” 15 LBS. SPO 13 H. 29” X W. 8” 10 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 10 H. 21” X W. 21” 13 LBS.
SPO 15A H. 6” X W. 26”
SPO 17 H. 29” X W. 7-3/8” 10 LBS.
32
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
VINEYARD DESIGNS
18
SPO 19 H. 15-1/2” X W. 8” 5.5 LBS.
SPO 11 H. 22” X W. 7-1/2” 6.5 LBS..
SPO 11-X H. 24-1/8” X W. 6-1/4” 8 LBS.
SPO 10-A H. 15-1/2” X W. 15-1/2” 5 LBS.
SPO 12 H. 28” X W. 7-1/2” 9 LBS.
SPO 13B H. 22” X W. 9” 10.5 LBS.
SPO 100(SBO) H. 12-1/2” X W. 31” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
33
© 2010 STEEL AND PIPES, INC.
SPO 16 H. 9” X W 17” 3.5 LBS
ORNAMENTAL IRON DIVISION
BIRD PANELS SERIES
18
16”
12-1/2”
SPO 80 H. 21-1/2” X W. 28-1/2” 18 LBS.
SPO 80-A H. 12” X W. 24-3/4” 13.5 LBS.
SPO 82 H. 22” X W. 8-1/2” 11 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 85 H. 24-3/4” X W. 8-1/8” 11.3 LBS.
SPO 81 H. 15-1/2” X W. 8-1/2” 7.5 LBS.
34
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
PONTALBA PANELS SERIES
18
SPO 62-XL H. 3-1/2” X LENGTH 31-3/4” 4.5 LBS.
SPO 62-X H. 6” X LENGTH 23” 5.5 LBS.
SPO 65 H. 19-1/2” X W. 7” 6 LBS.
SPO 80-B H. 21” X W. 21” 13 LBS.
SPO 80-F H. 5” X W. 21-1/2” 6 LBS.
SPO 67(SF) H. 28-1/2” X W. 8-1/4” 8.5 LBS
SPO 80-C H. 15-1/2” X W. 15-1/2” 8 LBS.
SPO 65-X H. 27-3/4” X W. 7-3/8” 10 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
35
© 2010 STEEL AND PIPES, INC.
SPO 60 H. 17” X W. 17” 7-1/2 LBS.
ORNAMENTAL IRON DIVISION
BELL FLOWER DESIGNS
18
SPO 40-A H. 16” X W. 16” 5.5 LBS.
SPO 46 H. 6-1/4” X W. 7-1/4” 1 LBS.
© 2010 STEEL AND PIPES, INC.
MORNING GLORY DESIGNS
36
SPO 58 H. 20-1/4” X W.23” 11 LBS.
SPO 56 H. 17” X W. 16-1/4” 7 LBS.
SPO 54 H. 30” X W. 10” 12 LBS.
SPO 55 H. 30-3/4” X W. 6” 7 LBS.
SPO 44 H. 31-1/2” X W. 6-1/4” 5.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
IVY LEAF DESIGNS
18
SPO 858 H. 15-3/4” X W. 8-1/2” 3.5 LBS.
SPO 852 H. 14-1/4” X W. 17-3/4” 5.5 LBS.
SPO 856 H. 31” X W. 8-1/4” 7.5 LBS.
SPO 850 H. 4-1/2” X W. 19” 3 LBS.
DOGWOOD DESIGNS
SPO 854 H. 19-1/4” X W. 7-3/4” 4.5 LBS.
SPO 45-A H. 27-1/4” X W. 8-1/2” 7.5 LBS.
SPO 43 H. 18-1/2” X W. 8” 4.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
37
© 2010 STEEL AND PIPES, INC.
SPO 41 H. 9” X W. 17” 3.5 LBS.
ORNAMENTAL IRON DIVISION
SUNFLOWER AND MAGNOLIA DESIGNS
18
SPO 98-C H. 16” X W. 16” 8 LBS. SPO 98 H. 29” X W. 8” 9 LBS.
SPO 97-A H. 8-1/2” X W. 30-1/2” SPO 98-B H. 14” X W. 14” 6 LBS.
© 2010 STEEL AND PIPES, INC.
MODERN DESIGNS
SPO 694(SF) H. 28-3/8” X W. 6-1/4” 3.5 LBS. 38
SPO 624 H. 28-1/4” X W. 11” 18 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
MODERN DESIGNS
18
SPO 648 H. 27-5/8” X W. 15-1/2” 20 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
39
© 2010 STEEL AND PIPES, INC.
SPO 88 H. 30-3/8” X W. 8-1/4” 9 LBS
SPO 88-XL H. 35” X W. 9-1/4” 10 LBS.
ORNAMENTAL IRON DIVISION
MODERN DESIGNS
18
SPO 631(SF) H. 28-1/2” X W. 11-1/4” 15 LBS.
SPO 150-B H. 14-5/8” SQUARE 4 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 150 H. 19-1/4” X W. 7-1/4” 4 LBS
40
SPO 63 H. 21-1/2” X W. 9-1/2” 3 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SPO 689(SF) H. 26-1/2” X W. 7” 5.5 LBS.
ORNAMENTAL IRON DIVISION
MODERN DESIGNS
18
SPO 632 H. 23-3/4” X W. 11-1/2” 13 LBS.
SPO 630 H. 30” X W. 8” 10 LBS.
SPO 635 H. 20” X W. 20” 12 LBS.
SPO 610 H. 28-5/8” X W. 7-5/8” 9.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
41
© 2010 STEEL AND PIPES, INC.
SPO 625 H. 30-1/2” X W. 8-5/8” 10 LBS.
ORNAMENTAL IRON DIVISION
RAILING DESIGNS
18
SPO 8307 H. 28” X W. 2-1/2” 7 LBS.
SPO 8304 LENGTH 35-3/8” BASE 1-1/2” - TOP 7/8” 12-1/2 LBS.
SPO 8305 LENGTH 31-1/4” OVAL BASE 1” X 2-1/4” TOP OVAL 1/2” X 1-1/2” 7-1/2 LBS.
SPO 621 LENGTH 29” CENTER WIDTH 5-3/4” 5/8” SOLID ENDS 5 LBS.
SPO 7618 LENGTH 36-1/2” 1-1/4” ENDS 11 LBS.
SPO 89-A H. 29-3/4 X W. 4” 7 LBS.
SPO 8306 LENGTH 26” WITH AT TOP AND BOTTOM 7-1/2” 6 LBS.
SPO 89XL H. 30” W. 6-5/8” 12 LBS
5”
2-1/2”
© 2010 STEEL AND PIPES, INC.
15”
SPO 89-B LENGTH 32-1/2” 1” ENDS 11 LBS.
42
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
RAILING DESIGNS
18
SPO 89 H. 27-3/4” X W. 6” 10 LBS.
SPO 87 H. 29-1/2” X W. 6” 10 LBS. SPO 87 H. 29-1/2” X W. 6” 10 LBS.
6-1/2” 3/4”
26-3/4”
3/4”
SPO 83 H. 36-3/4” X W. 11-1/4” 16 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
43
© 2010 STEEL AND PIPES, INC.
2”
ORNAMENTAL IRON DIVISION
RAILING DESIGNS
18
SPO 7462 H. 29” X W. 6-3/4” 9 LBS.
SPO 7463 H. 31-1/2” X W. 6-3/4” 9 LBS.
SPO 693(SF) H. 29-1/2” X W. 5-1/2” 8 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 80-C H. 15-1/2” X W. 15-1/2” 8 LBS.
SPO 644 H. 23-1/2” X W. 9” 12 LBS.
44
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SPO 67-XL H. 30-3/4” x W. 7-3/4” 9-1/2 lbs.
SPO 87-A H. 27” X W. 9” 12 LBS
ORNAMENTAL IRON DIVISION
RAILING DESIGNS
18
SPO 645 H. 26” X W. 10-1/4” 10 LBS.
SPO 640 H. 27-1/2” X W. 7-1/2” 8 LBS.
SPO 84 H. 32” X W. 6-1/4” 10 LBS. SPO 692(SBO) H. 29-1/2” X W. 11-1/2” 11 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
45
© 2010 STEEL AND PIPES, INC.
SPO 7446 H. 34” X W. 5-1/2” 9 LBS.
ORNAMENTAL IRON DIVISION
RAILING DESIGNS
18
SPO 8502 H. 21” X W. 18-1/2” 15.5 LBS.
SPO 7153 H. 23-1/2” X W. 15-1/8”
© 2010 STEEL AND PIPES, INC.
SPO 8658(SF) H. 26” X W. 14-1/2” 20 LBS.
SPO 86 H. 26-1/2” X W. 10” 9 LBS.
46
SPO 680(SF) H. 10” X W. 22” 6 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 62XL H. 31-5/8” X W. 3-1/2” 4.5 LBS.
SPO 1345 H. 33-1/4” X W. 5” 10 LBS.
SPO A-2 H. 25-5/8” X W. 4-1/8” 5 LBS.
SPO A-3 H. 31-5/8” X W. 4-1/8” 6.5 LBS.
SPO 1310 H. 33-1/4” X W. 9-3/4” 15 LBS.
SPO 1305 H. 33-1/4” X W. 7-3/4” 15 LBS.
SPO 1337 H. 33-1/4” X W. 8-3/4” 13.5 LBS.
SPO 1335 H. 33-1/4” X W. 8-3/4” 13.5 LBS.”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
47
© 2010 STEEL AND PIPES, INC.
METAL CASTING DESIGNS
18
ORNAMENTAL IRON DIVISION
METAL CASTING DESIGNS
18
SPO 9020 H. 5.5” X W. 21” 8.5 LBS.
SPO 66-S H. 7” X W. 13”
SPO A-2 H. 4-1/8” X W. 25-5/8” 5 LBS.
SPO 8311 H. 5-1/2” X W. 12-3/4” 3 LBS.
SPO A-3 H. 4-1/8” X W. 31-5/8” 6-1/2 LBS.
SPO 7314 H. 3-7/8” X W. 14-1/8” 4 LBS.
© 2010 STEEL AND PIPES, INC.
SPO 5210-DX H. 4” X W. 21-1/2” 5 LBS.
SPO 697 H. 27-1/2” X W. 11” 10 LBS.
48
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
METAL CASTING DESIGNS
18
SPO 7515 H. 22-3/4” X W. 20” 27 LBS.
SPO 8363-R(SBO) H. 30-3/4” X W. 19” 35 LBS.
SPO 8503(SBO) H. 29” X W. 9-1/2” 14 LBS.
SPO 708(SF) H. 11-1/4” X W. 20-1/4” 18 LBS.
SPO 685XS H. 13-1/2” X W. 20-1/4” 15 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
49
© 2010 STEEL AND PIPES, INC.
GRILLS DESIGNS
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
MODERN DESIGNS
18
50
SPO 679 H. 4” X W. 4” 3/4 LBS.
SPO 143 H. 4-3/4” X W. 4-3/4” 3/4 LBS.
SPO 147-XS H. 4” X W. 5-3/4” 1 LBS.
SPO 639 H. 8” X W. 3” 1-1/2 LBS.
SPO 31-XL H. 10-1/4” X W. 8-1/2” 3 LBS.
SPO 31 H. 12” X W. 8-1/4” 2 LBS.
SPO 30 H. 14-1/2” X W. 7-1/4” 2-1/2 LBS.
SPO 35 H. 15-1/2” X W. 8-1/4” 3 LBS.
SPO 35-B H. 14-3/4” X W. 7” 3 LBS.
SPO 30-X H. 15-5/8” X W. 7” 3 LBS.
SPO 32 H. 16-3/4” X W. 8-3/4” 3-1/2 LBS.
SPO 60-X H. 14-1/2” X W. 8-1/4” 6 LBS.
SPO 76 H. 17-1/2” X W. 7-3/4” 5-1/2 LBS.
SPO 19 H. 15-1/2” X W. 7-3/4” 5-1/2 LBS.
SPO 76-S H. 12-1/4” X W. 8-1/4” 4 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
SPO 34 H. 8/4” X W. 10-1/4” 2.5 LBS.
SPO 679-XL H. 6-1/2” X W. 8-1/4” 2 LBS.
SPO 145 H. 7-3/4” X W. 6-1/4” 1-3/4 LBS.
SPO 146 H. 12-1/2” X W. 6-1/2” 2-1/4 LBS.
SPO 95 H. 14-1/2” X W. 7” 2-1/2 LBS.
SPO 147 H. 18” X W. 8-1/8” 4 LBS.
SPO 8330 H. 18” X W. 7” 3-1/2 LBS.
SPO 8332 H. 15” X W. 5-3/4” 3 LBS.
SPO 8333 H. 17” X W. 6-3/4” 3 LBS.
SPO 33 H. 15” X W. 8” 3-1/2 LBS.
SPO 39 H. 8” X W. 15-1/2” 5.5 LBS.
SPO 641 H. 17-5/8” X W. 7-3/4” 3 LBS.
SPO 7836 H. 5-3/4” X W. 7-3/8” 3 LBS.
SPO 7837 H. 11-1/2” X W. 7-3/4” 4-1/4 LBS.
SPO 144 H. 7-3/4” X W. 13” 2.5 LBS.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
51
© 2010 STEEL AND PIPES, INC.
MODERN DESIGNS
18
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 48/1 1/2” sq. 35 7/16” H
Art. 48/A/13 1/2” sq. 35 7/16” H
52
Art. 48/2 1/2” sq. 35 7/16” H
Art. 48/A/16 1/2” sq. 35 7/16” H
Art. 48/3 1/2” sq. 35 7/16” H
Art. 64/F/8 1/2” sq. 35 7/16” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 48/4 1/2” sq. 35 7/16” H
Art. 64/I/5 9/16” sq. 35 7/16” H
ORNAMENTAL IRON DIVISION Art. 64/I/3 9/16” sq. 35 7/16” H
Art. 505/3 9/16” sq. 35 7/16” Approx.
Art. 64/H/10 9/16” sq. 35 7/16” H
Art. 505/4 9/16” sq. 35 7/16” Approx.
Art. 489/1 9/16” sq. 35 7/16” Approx.
Art. 499/1 1/2” Dia. 35 7/16” H
Art. 489/2 9/16” sq. 35 7/16” Approx.
Art. 70/D/1 9/16” sq. 35 716” H
Art. 70/D/2 9/16” sq. 35 716” H
Art. 53/3 1/2” sq. 35 716” H
Art. 65/8 1/2” sq. 35 716” H
Art. 70/D/3 9/16” sq. 35 716” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
53
© 2010 STEEL AND PIPES, INC.
Art. 64/I/2 9/16” sq. 35 7/16” H
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 1701/6 9/16” Sq. 39 1/2” H
Art. 1716/14 9/16” Dia. 39 1/2” H
54
Art. 1733/10 9/16” Sq. 39 1/2” H
Art. 1716/16 9/16” Dia. 39 1/2” HOlium
Art. 1733/12 9/16” Sq. 39 1/2” H
Art. 1716/18 9/16” Dia. 39 1/2” H
Art. 1702/2 9/16” Sq. 39 1/2” H
Art. 1716/24 9/16” Dia. 39 1/2” H
Art. 1702/4 9/16” Sq. 39 1/2” H
Art. 64/A/3 1/2" sq. 8 5/8” W. 35 7/16” H
Art. 1702/6 9/16” Sq. 39 1/2” H
Art. 64/B/2 1/2" sq. 8 5/8” W. 35 7/16” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 1730/8 9/16” Sq. 39 1/2” H
Art. 469/1 1/2" sq. 5 3/4” W. 35 7/16” H
ORNAMENTAL IRON DIVISION Art. 577/2 9/16" dia. 6 5/8” W. 35 7/16” H
Art. 52/2 1/2" sq. 9 1/4” W. 35 7/16” H
Art. 561/6 9/16" sq. 8 1/4” W. 35 7/16” H
Art. 51/3 1/2" sq. 11 13/16” W. 35 7/16” H
Art. 64/G/2 9/16" sq. 8 7/8” W. 35 7/16” H
Art. 70/B/1 1/2” sq. 7 7/8” W. 35 7/16” H
Art. 52/A/3 1/2” sq. 6 5/8” W. 35 7/16” H
Art. 52/A/5 1/2” sq. 6 5/8” W. 35 7/16” H
Art. 1753/6 1/2” sq. 10 1/4” W. 39 1/2” H
Art. 53/1 1/2" sq. 9 1/4” W. 35 7/16” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
55
© 2010 STEEL AND PIPES, INC.
Art. 52/F/1 1/2" sq. 10 1/4” W. 35 7/16” H
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 1701/2 9/16" sq. 39 1/2” H
Art. 1702/14 9/16" sq. 39 1/2” H
56
Art. 1701/4 9/16" sq. 39 1/2” H
Art. 1702/15 1" sq. 47 1/4” H
Art. 50/9 9/16" sq. 1 3/16” W x 35 7/16" H
Art. 1701/14 9/16" sq. 39 1/2” H
Art. 50/10 9/16" sq. 1 3/16” W x 35 7/16" H
Art. 1701/15 1" sq. 47 1/4” H
Art. 64/F/3 9/16" sq. 35 7/16" H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 64/F/5 9/16" sq. 35 7/16" H
ORNAMENTAL IRON DIVISION 57
© 2010 STEEL AND PIPES, INC.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
Art.1043/1 1/2" sq. 8 1/4” W. 40 1/2” H
© 2010 STEEL AND PIPES, INC.
Art. 475/2 15” x 32 7/16”
58
Art.1043/2 1/2" sq. 19 5/16” W. 40 1/2” H”
Art. 479/1 1/2" sq. 4 5/16” W. 35 7/16” H
Art. 479/2 1/2" sq. 15 1/8” W. 35 7/16” H
Art. 475/1 15” x 32 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION Art. GD/20/2 1/2” Sq. 4 5/16” W. 39 1/2” H
Art. GD/20/6 1/2” Sq. 3 15/16” W. 39 1/2” H
Art. GD/20/7 1/2” Sq. 3 15/16” W. 39 1/2” H
Art. GD/58/3 1/2” Sq. 4 3/4” W. 39 1/2” H
Art. 1699/8 1/2” Dia. 6 5/16” W. 39 1/2” H
Art. 1699/9 1/2” Dia. 5 1/8” W. 39 1/2” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
59
© 2010 STEEL AND PIPES, INC.
Art. GD/20/1 1/2” Sq. 4 5/16” W. 39 1/2” H
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 1718/9 1/2” Sq. 39 1/2”
Art. 1720/7 1/2” Sq. 39 1/2”
60
Art. 1718/11 1/2” Sq. 39 1/2”
Art. 1720/9 1/2” Sq. 39 1/2”
Art. 1718/13 1/2” Sq. 39 1/2”
Art. 1718/15 1/2” Sq. 39 1/2”
Art. 1718/17 1” Sq. 47 1/4”
Art. 1720/11 1/2” Sq. 39 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION Art. 1789/1 1 7/32” x 3/16” 31 1/2” H
Art. 1789/3 1 1/16” X 3/16” 31 1/2” H
Art. 1789/4 1 7/32” X 3/16” 31 1/2” H
Art. 1785/4 1 3/16” X 3/16” 37 13/32” H
Art. 1791/1 1 3/16” X 5/16” 39 1/2” H
Art. 44/12 35 7/16” x 9 7/16”
Art. 1789/2 1 1/4” X 3/16” 31 1/2” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
61
© 2010 STEEL AND PIPES, INC.
Art. 62/1 28 11/16” x 9 13/16”
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 1670/1 14 3/16” x 39 1/2”
Art. 1671/3 13 3/4” x 34 1/4”
Art. 541/2 14 9/16” x 35 7/16”
Art. 1051/4 5 7/8” x 15 3/4”
Art. 52/1 13 3/4” x 34 1/4”
Art. 1127/3 1/2” Sq. 8 1/6” x 39 1/2”
62
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 63/3 9 1/4” x 32 1/2”
Art. 1074/1 3/8” Dia. 8 1/6” x 39 1/2”
ORNAMENTAL IRON DIVISION Art. 1049/1 10 1/4” x 39 1/2”
Art. 1051/1 7 9/32” x 39 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
63
© 2010 STEEL AND PIPES, INC.
Art. 1051/2 5 9/32” x 39 1/2”
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 144/3 1 3/16” x 34 7/16”
Art. 145/3 1 3/16” x 36 9/16”
Art. 802/1 13 3/4” x 39 3/8”
64
Art. 513/1 5 1/2” x 35 7/16”
Art. 525/1 1 3/16” x 36 3/8”
Art. 533/4 1 3/16” x 36 3/8”
Art. 802/2 10 5/8” x 25 5/8”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 531/1 35 7/16”
ORNAMENTAL IRON DIVISION Art. 148/1 1 3/16” x 35 7/16”
Art. 497/1 39 3/8”
Art. 148/2 1 3/16 x 35 7/16”
Art. 497/2 39 3/8”
Art. 149/1 35 7/16” Approx.
Art. 105/1 39 1/2”
Art. 98/1 39 3/8”
Art. 105/2 39 3/8”
Art. 99/2 39 3/8”
Art. 1184/3 39 1/2”
Art. 99/1 39 3/8”
Art. 1185/1 39 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
65
© 2010 STEEL AND PIPES, INC.
Art. 109/3 39 3/8”
ORNAMENTAL IRON DIVISION
Art. 64/I/1 1”x 1” x 47 1/4”
Art. 64/F/1 1”x 1” x 47 1/4”
Art. 112/5 1”Sq. 47" 1/4" H
Art. 112/6 1 3/16” sq. 47" 1/4" H
© 2010 STEEL AND PIPES, INC.
Art. 112/7 1" sq 47" 1/4" H Art. 113/5/25/S 1" sq. 47" 1/4" H
66
Art. 799/1 1" sq. 47" 1/4" H
Art. 112/8 1 3/16” sq. 47" 1/4" H
Art. 113/2 1 3/16” sq. 47" 1/4" H
Art. 797/2 1 3/16” dia. 47" 1/4" H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 797/1 1 3/16” dia. 47" 1/4" H
ORNAMENTAL IRON DIVISION Art. 1658/1 22 7/8” X 17 5/16” Extendible 5/8” x 5/16” flat bar
Art. 1659/1 9/16” sq. 17 3/4” Dia.
Art. 1657/1 16 1/8” X 15 3/4” 5/8” x 5/16” flat bar
Art. 679/1 1/2” dia. 16 1/2” x 16 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
67
© 2010 STEEL AND PIPES, INC.
Art. 1657/4 22 5/8” X 15 3/4” 5/8” x 5/16” flat bar
ORNAMENTAL IRON DIVISION
LARGE PANELS
© 2010 STEEL AND PIPES, INC.
Art. GD0012 5/8” x 5/16” 24 1/64" W approx. x 36 39/64” H approx.
Art. GD004 5/8” x 5/16” 30 5/16” W approx. x 40 35/64” H approx.
68
44 3/32” approx.
Art. GD005 5/8” x 5/16” 55 21/64” W approx. x 26 3/8” H approx.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
58 21/32” approx.
ORNAMENTAL IRON DIVISION Art. GD0016 5/8” x 5/16” 10 5/8" W approx. x 39 3/8” H approx.
Art. GD0018 5/8” x 5/16” 12 63/63” W approx. x 36 7/32” H approx.
Art. GD0017 5/8” x 5/16” 12 63/63” W approx. x 37 13/64” H approx.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
69
© 2010 STEEL AND PIPES, INC.
Art. GD0014 5/8” x 5/16” 8 3/4” W approx. x 29 15/16” H approx.
ORNAMENTAL IRON DIVISION
Art. 26/C/1 1/2” sq. 16 7/8” x 20 5/8”
Art. 17/1 9 7/8” dia. 3/8” x 3/16”
© 2010 STEEL AND PIPES, INC.
Art. 17/2 5/16” sq. 9 7/8" dia.
Art. 23/2 3/4” x 5/32” 9 7/8” dia.
70
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 23/1 3/8” x 13/16” 9 7/8 “ dia. flat bar
Art. 446/1 13 3/4” dia. 1/2" x 1/4" flat bar
Art. 1011/1 3/8” dia. 17 5/16” dia.
ORNAMENTAL IRON DIVISION Art. 36/2 9 1/16” x 15”
Art. 36/1 8 5/8” x 9 7/8”
Art. 35/1 8 1/16” x 15 1/2”
Art. 35/2 7 7/8” x 13 9/16”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
71
© 2010 STEEL AND PIPES, INC.
Art. 37/3 3 3/4” x 3 3/4”
ORNAMENTAL IRON DIVISION
Art. 1280/2 35 7/16” x 11 13/16"
Art. 1281/2 48 1/4” x 17 1/2”
Art. 116/D/2 17 23/32” x 50 13/32”
Art. 696/3 15 3/4” X 15 15/16”
Art. 696/1 39 3/4” x 11”
Art. 1281/8 29 1/2” W x 9 7/8” H
Art. 1281/12 43" W x 12" H
© 2010 STEEL AND PIPES, INC.
Art. 1281/14 31 1/2” W x 8 7/8” H
72
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 158/1 9/16” x 5/32” Art. 158/2 11/16” x 1/4”
ORNAMENTAL IRON DIVISION
LENGTH OF BARS 13' APPROX
LENGTH OF BARS 10' APPROX Art. 158/7 5/8” x 1/4”
Art. 114/10 1 9/16” x 5/16”
Art. 114/5 1 9/16” x 5/16”
LENGTH OF BARS 10' APPROX
Art. 1834/2 1 1/4” x 3/16”
Art. 1834/3 1 1/4” x 5/32”
L 20' APPROX
L 10' APPROX
Art. 811/6/T 2 5/16” x 5/8” To fit 1 1/4" and 1 9/16" Tubing, channel or flat bar
Art. 114/A/3 2" x 9/16"
Art. 1834/4 1 1/4” x 3/16”
Art. 1834/5 1 1/4” x 3/16”
L 20' APPROX L 20' APPROX Art. 811/6 MCR 2 7/32" x 13/16"
Art. 811/7 (MCR) 1 3/4" x 9/16"
Art. 1834/6 1 5/32” x 3/16”
L 20' APPROX Art. 811/7/T 1 5/8" x 7/16"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
73
© 2010 STEEL AND PIPES, INC.
Art. 1834/1 1 1/4” x 3/16”
ORNAMENTAL IRON DIVISION
END PIECES FOR HANDRAILS
Art. 1822/1 for handrail Art. 114/A/3 12 25/32” dia.
Art. 1377/40 for handrail Art 811/6 Art. 1377/41 for handrail Art 811/7 Art. 1377/40/T for handrail Art 811/6/T Art. 1377/41/T for handrail Art 811/7/T
© 2010 STEEL AND PIPES, INC.
Art. 114/B/14 5 7/8” x 13 3/4” for handrail Art. 114/A/3
Art. 116/2 5 7/8” x 13 3/4” for handrail Art. 114/5 Art. 116/6 5 7/8” x 13 3/4” for handrail Art. 114/10
74
Art. 812/12 5 7/8” x 11 13/16” for handrail Art. 811/6 Art. 812/13 for handrail Art. 811/7 Art. 812/12/T 5 7/8” x 11 13/16” for handrail Art. 811/6/T Art. 812/13/T for handrail Art. 811/7/T
Art. 114/B/13 5 7/8” x 11 13/16” for handrail Art. 114/A/3
Art. 116/10 5 7/8” x 11 13/16” for handrail Art. 114/5 Art. 116/14 5 7/8” x 11 13/16” for handrail Art. 114/10
Art. 116/A/9 for handrail Art. 114/5 12 25/32” dia. Art. 116/A/13 for handrail Art. 114/10 12 25/32” dia. Art. 116/26 for handrail Art. 114/5 6 13/32” dia. Art. 116/30 for handrail Art. 114/10 6 13/32” dia.
Art. 114/B/5 17 3/4” x 35 7/16” for handrail Art. 114/5 Art. 114/B/9 17 3/4” x 35 7/16” for handrail Art. 114/10
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
HAMMERED TUBES L 20' APPROX
Art. 118/E/1 3/4” sq. Art. 118/E/2 1 3/16” x 3/4” Th. Art. 118/E/3 1 3/16” sq. Art. 118/E/5 1 9/16” sq. Art. 118/E/6 2" x 1 3/16”
Art. 118/E/9 1” sq. Art. 118/E/6S 2” x 1 3/16” 1/16” Th. Art. 118/E/9S 1” sq. 1/16” Th. Art. 1374/15 2” sq.” Art. 1374/19 1/2” sq.
HOT PIERCED BARS Art. 42/1 9/16” dia holes per bar N 14 Art. 42/2 5/8” dia holes per bar N 13 Art. 42/8 9/16” sq. holes per bar N 14 Art. 42/22 9/16” sq. holes per bar N 14
HAMMERED BARS
Art. 118/1/6000 1/2” x 20' Art. 118/2/6000 9/16” x 20'
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
75
© 2010 STEEL AND PIPES, INC.
Art. 118/1 1/2” x 10’ Art. 118/2 9/16” x 10’
ORNAMENTAL IRON DIVISION
Art. 80/A/11 2 9/16” x 5 15/16”
Art. 80/A/12 2 3/4” x 7 1/2”
Art. 80/A/1 4 5/16” x 10 5/8”
Art. 64/G/4 2 3/8” x 4 1/8”
Art. 64/G/5 2 3/8” x 4 1/8”
Art. 64/G/6 2" x 4 1/16”
Art. 80/A/3 2 3/8” x 4 5/16”
Art. 73/1 4 5/16” x 11 13/16”
Art. 88/H/2 2” X 5”1/8" Art. 88/H/3 2” X 5"
Art. 73/2 4 5/16” x 9 1/16”
© 2010 STEEL AND PIPES, INC.
Art. 157/1 3 15/16” dia Art. 157/2 4 1/2” dia.
76
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 64/G/3 4 1/8” x 5 7/8”
Art. 73/3 3 9/16” x 7 1/16”
Art. 491/8 1/2” sq. 3 15/16” dia. PLAIN Art. 491/9 1/2” sq. 3 15/16” dia. HAMMERED
Art. 94/E/1 18 1/8” X 17 15/16” 1/2” Dia.
Art. 94/E/5 24 13/32” X 16 1/8” 1/2” Dia.
Art. 94/F/5 38 3/16” X 16 1/2” 1/2” Dia.
Art. 94/E/2 18 1/8” X 17 15/16” 1/2” Dia.
Art. 94/E/6 24 13/32” X 16 1/8” 1/2” Dia.
Art. 94/F/6 38 3/16” X 16 1/2” 1/2” Dia.
Art. 687/3 1/2” Dia. 4 3/4 X 6 5/8”
Art. 687/6 1/2” Dia. 4 3/4 X 6 5/8”
Art. 94/E/3 21 1/4” X 12 1/4” 1/2” Dia.
Art. 94/E/4 21 1/4” X 12 1/4” 1/2” Dia.
Art. 94/C/11 14 1/2” X 13” 1/2” Dia.
Art. 94/C/3 6 5/8” X 4 5/16” 3/8” Dia.
Art. 94/C/12 14 1/2” X 13” 1/2” Dia.
Art. 94/C/4 6 5/8” X 4 5/16” 3/8” Dia.
Art. 94/C/1 5 1/8” X 3 15/16”
Art. 94/C/2 5 1/8” X 3 15/16”
Art. 94/F/1 27 3/16” X 12 5/8” 1/2” Dia.
Art. 94/F/2 27 3/16” X 12 5/8” 1/2” Dia.
Art. 94/F/3 31 1/2” X 19 5/16” 1/2” Dia.
Art. 94/F/4 31 1/2” X 19 5/16” 1/2” Dia.
Art. 94/C/5 10 5/8” X 7 1/2” 3/8” Dia.
ORNAMENTAL IRON DIVISION
Art. 681/8 5/8” x 5/16” 13” X 16 1/8”
Art. 94/C/6 10 5/8” X 7 1/2” 3/8” Dia.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
77
© 2010 STEEL AND PIPES, INC.
Art. 681/7 5/8” x 5/16” 13” X 16 1/8”
ORNAMENTAL IRON DIVISION
Art. 138/10 1 3/4” x 3 3/8”
Art. 662/1 4 1/8” x 8 11/16”
Art. 660/3 8 1/4" x 5"
© 2010 STEEL AND PIPES, INC.
Art. 697/3 3 3/4” dia. Art. 697/4 2 9/16” dia.
Art. 136/7 1 1/2” dia.
78
Art. 138/13 7 1/2” x 7 7/8”
Art. 662/2 4 1/8” x 8 11/16”
Art. 660/4 8 1/4" x 5"
Art. 116/A/3 3 3/4” dia
Art. 136/6 2 1/8” dia.
Art. 702/3 3 1/8” x 7 11/16”
Art. 138/11 2 15/16” x 2 3/4”
Art. 663/7 6 5/16” x 7 1/2”
Art. 660/7 8 1/4" x 5 3/4"
Art. 660/8 8 1/4" x 5 3/4"
Art. 116/A/4 2 9/16” dia
Art. 136/5 2 9/16”
Art. 663/8 6 5/16” x 7 1/2”
Art. 138/3 3 15/32” dia.
Art. 140/6 11/16" dia x 19/32" H
Art. 138/15 2 3/8” dia
Art. 138/12 3 3/4” x 4 1/8”
Art. 660/1 16" x 7"
Art. 138/4 3 9/16” dia.
Art. 140/7 15/16" dia x 1/2" H
Art. 140/5 2 3/8” dia
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 140/3 1 29/64” x 3 1/8”
Art. 660/2 16" x 7"
Art. 138/5 3 1/2” dia.
Art. 664/3 1 9/16”
Art. 137/9 4 5/16” x 2 9/16”
ORNAMENTAL IRON DIVISION Art. 137/7 2 9/16” x 5 1/8”
Art. 137/8 1 15/15” x 3 9/16”
Art. 139/4 2 1/2” x 7 7/8”
Art. 139/5 1 3/8” x 3 15/16”
Art. 116/A/6 3/8" H 3 15/16" x 3 15/16" Art. 664/7 2 x 11 3/16”
Art. 664/8 5 1/8” x 9 13/16”
Art. 139/1 1 1/8” x 2 9/16”
Art. 1408/1 3 1/8" x 3 1/8" H 11/16"
Art. 140/4 1 3/8” x 3 15/16”
Art. 1408/2 2 1/8" x 2 1/8" H 1/2"
Art. 664/9 3 1/8” x 11 13/16” Art. 116/A/7 3/8" H 3 15/16" x 3 15/16"
Art. 136/3 2 3/4” X 2 3/8”
Art. 1405/2
Art. 136/4 2 3/4” X 2 3/8”
Art. 1405/3
Art. 136/1 1 9/16" x 4 5/16" right hand
Art. 136/2 1 9/16" x 4 5/16" left hand
Art. 94/A/6 3 15/16" x 3 15/16" x 5/16" H
Art. 841/7 1/8" 2 15/16" x 20 x 1/2"
Art. 841/6 5/32" H 7 7/8" x 5 29/32"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
79
© 2010 STEEL AND PIPES, INC.
Art. 94/A/3 3 15/16" x 3 15/16" x 5/16"
ORNAMENTAL IRON DIVISION
Art. 116/11 4 15/16” x 2 3/4” Art. 116/33 5 7/8” x 5 4/16”
Art. 169/15 4 15/16” x 1 9/16”
Art. 116/34 5 7/8” x 5 4/16”
Art. 170/A/2 2 5/8” x 4 15/16”
Art. 170/B/5 3 5/16” x 5 3/8”
Art. 170/A/3 3 578” x 2 1/8”
Art. 170/A/5 1 5/16” x 1 11/16”
Art. 170/A/7 1 7/8” x 1 7/8” Art. 170/B/4 3 5/16” x 2 1/16”
Ø 31 mm Ø 1 1/4”
Art. 181/10 4 1/8” x 11 1/4”
Art. 181/11 4 1/8” x 11 1/4” Art. 181/14 7/8” Dia.
© 2010 STEEL AND PIPES, INC.
Art. 833/4 11 1/32” x 2 3/8”
Art. 836/1 9 7/8” x 2”
Art. 836/6 10 5/8” x 1 9/16” mm
80
Ø 38 mm Ø 1 1/2”
Art. 181/12 4 1/8” x 11 1/4”
Art. 181/15
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 181/13 7/8” Dia.
external dia. 1 9/16” Art. 128/2 9/16” Sq. Art. 128/38 1/2” Sq. Art. 128/39 5/8” Sq.
Art. 155/1 1 3/16" W x 3 11/32" H Hole 33/64” dia
Art. 128/17 1 9/16" x 1 17/32" Hole 1/2” Art. 128/18 1 9/16" x 1 17/32" Hole 9/16” Art. 128/21 1 3/4" x 1 23/32" Hole 21/32” Art. 128/22 1 3/4" x 1 23/32" Hole 23/32” Art. 128/28 2" x 1 13/16" Hole 29/32”
Art. 747/10 1 9/16" x 2 3/4" Hole 19/16” Art. 747/11 1 9/16" x 2 3/4" Hole 1/2”
Art. 747/8 1 9/16" x 4 1/2" Hole 19/16” Art. 747/9 1 9/16" x 4 17/32" Hole 1/2”
ORNAMENTAL IRON DIVISION
Art. 128/9 5/8" dia. Hole 5/8” dia. Art. 128/10 1 3/4” x 2 11/16” Hole 3/4” dia. Art. 128/15 1 31/32” x 3 1/16” Hole 37/32” dia.
Art. 746/6 1 9/16" x 1 1/2" Hole 9/16”
Art. 746/4 1 29/32" x 1 3/16" Hole 5/8”
external dia. 1 9/16” Art. 128/1 9/16” Dia. Art. 128/36 1/2” sq. Art. 128/37 5/8” sq.
Art. 155/2 1 3/16" W x 2 9/16" H Hole 33/64” dia
Art. 747/12 1 9/16” x 2 9/16” 1/2” sq. hole Art. 747/13 1 3/4” x 2 21/32” Art. 747/14 2” x 3 1/16”
Art. 155/3 1 3/16" W x 2" H Hole 33/64” dia
Art. 155/4 1 3/16" W x 3/4" H Hole 33/64” dia
Art. 746/5 1 9/16" x 2 9/16" Hole 9/16”
Art. 155/6 1 3/16" W x 2 9/16" H Hole 33/64” dia
Art. 747/15 1 9/16” x 1 17/32” Hole 1/2” sq. Art. 747/16 1 3/4” x 1 11/16” Hole 9/16” sq. Art. 747/17 2" x 13/16” Hole 5/8” sq.
Art. 154/2 1 3/16" W x 5 7/8" H Hole 33/64” dia
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
81
© 2010 STEEL AND PIPES, INC.
Art. 128/6 1 9/16” x 2 17/32” Hole 1/2” dia. Art. 128/7 1 9/16” x 2 17/32” Hole 9/16” dia. Art. 128/8 1 9/16” x 2 17/32” Hole 5/8” dia.
ORNAMENTAL IRON DIVISION
Art. 124/1 1/2” dia. 4 29/32” H Art. 124/2 19/32” dia. 6 5/16” H
© 2010 STEEL AND PIPES, INC.
Art. 125/1 1 1/4” dia. 4 29/32” H
Art. 124/3 1/2” dia. 4 29/32” H Art. 124/4 19/32” dia. 6 5/16” H Art. 124/5 3/4” dia. 7 5/32” H
Art. 126/1 25/64” sq. 5 1/8” H
Art. 126/B/5 2" dia. 3 11/32” x 6 5/8” H
82
Art. 124/6 19/32” dia. 6 6/32” H
Art. 126/15 1 3/16” dia. 6 5/16” H 1 1/8” base Art. 126/16 1 9/16” dia. 7 15/32” H 1 1/2” base
Art. 126/B/9 27/32” dia. 2 19/32” x 6 5/8” H
Art. 124/7 9/16” dia. 5" H
Art. 124/8 19/32” dia. 5 3/16" H
Art. 122/A/1 1 1/4” dia 7 7/8” H
Art. 123/5 1" dia. 6 5/16” H
Art. 125/4 3/4” dia. 5 1/8" H
Art. 126/18 1 9/16” dia. 5 29/32” H
Art. 126/B/4 3/4” dia. 2 27/32” x 5 3/32” H
Art. 126/6 1 11/32” dia. 7 15/32” H Art. 126/19 1" dia. 5 1/2” H Art. 126/20 1 3/16” dia. 6 5/16” H
Art. 123/6 1 1/4” dia. 7 3/32” H
Art. 126/B/1 3/4” dia 3 7/32” x 7 21/32” H Art. 126/B/2 5/8” dia 2 21/32” x 6 9/32” H Art. 126/B/3 1/2” dia 2 1/8” x 5 3/32” H
Art. 126/A/1 19/32” dia 2 21/32” x 5 19/32” H
Art. 123/3 1 1/4” dia. 5 1/8” H
Art. 123/7 1 9/16” dia. 7 7/8” H
Art. 726/19 3 5/32" x 5 33/64"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 120/3 1 3/16” x 6 11/16”
Art. 121/4 2 1/8”
4 Filaments
Art. 116/A/20 2 3/4” x 2 3/16”
Art. 160/43 3 1/8” x 5 1/8” Base 5 9/16” dia.
Art. 749/22 2 3/64" dia. 3 15/16"
Art. 116/A/21 1 9/16” dia.
Art. 160/44 3 25/32” x 3 21/32” Base 1 9/16” dia.
Art. 113/9 3" dia.
Art. 160/45 2 9/32” x 4 5/8” Base 1 9/16” dia.
ORNAMENTAL IRON DIVISION
Art. 116/F/5 2” Art. 116/F/6 2 3/8” Art. 116/F/7 2 3/8” Art. 116/F/8 3 1/8” Art. 116/F/9 3 9/16” Art. 116/F/10 3 15/16”
Art. 113/10 2 3/4” dia.
Art. 160/46 2 1/8” x 3 1/16” Base 1 9/16” dia.
Art. 159/1 1 3/8” x 3 9/16” L 5/16” Art. 159/3 2 3/8” x 5 1/8” L 1/2” Art. 159/4 2 3/8” x 5 1/8” L 9/16” Art. 159/5 2 9/16” x 5 3/4” L 5/8” Art. 159/6 3 1/8” x 6 1/2” L 3/4” Art. 159/7 3 3/4” x 7 1/16” L 15/16”
Art. 158/B/7 1/4” sq. 2 3/4”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
83
© 2010 STEEL AND PIPES, INC.
Art. 116/F/1 3/4” Art. 116/F/2 1” Art. 116/F/3 1 3/16” Art. 123/1 1 9/16” Art. 116/F/4 1 9/16”
ORNAMENTAL IRON DIVISION
STAINLESS STEEL
Art. 1424/18 1 13/16”x 9/16”
Art. 1422/1 1/2”Dia 39 1/2”
Art. 1422/2 1/2”Dia 39 1/2”
Art. 1423/12 1 13/16”x 9/16”
Art. 1416/6/X 1 3/16” Dia. 47”
© 2010 STEEL AND PIPES, INC.
Art. 1425/1 2 3/4 Dia. 4 3/4”
Art. 1425/2 1 19/64” Dia. 5 1/2”
84
Art. 1417/2/X 1/2”Dia 39 1/2”
Art. 1417/3/X 1/2”Dia 39 1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
FORGED ALUMINIUM
Art. 768/11 3 15/16” x 39 1/2”
Art. 768/12 9/16” SQ. x 39 1/2”
Art. 768/4 9/16” SQ. 39 1/2”
Art. 768/5 Art. 768/6 9/16” SQ. 9/16” SQ. 39 1/2” 1 3/16” x 39 1/2”
Art. 769/9 9/16” SQ. x 39 1/2”
Art. 768/10 9/16” SQ. x 39 1/2”
Art. 768/7 9/16” SQ. 4 5/16” x 39 1/2”
Art. 769/11 1” SQ. 47”
Art. 768/8 9/16” SQ. 8 7/8” x 39 1/2”
Art. 768/9 8 1/4” x 39 1/2”
Art. 768/1 2 3/8” x 4 1/8”
Art. 768/2 2 3/8” x 4 1/8”
Art. 1448/8 3 1/8” SQ.
Art. 1448/9 4” x 4”
Art. 1448/10 4 3/4”.
Art. 1448/11 5 1/2”.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
85
© 2010 STEEL AND PIPES, INC.
Art. 768/10 Art. 768/3 1” SQ. 9/16” SQ. 47” 5 1/2” x 39 1/2”
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 1444/11 5/8” SQ. 39 1/2”
Art. 1446/3 1/2” SQ. 39 1/2”
86
Art. 1444/12 5/8” SQ. 39 1/2”
Art. 1446/4 1/2” SQ. 39 1/2”
Art. 1444/13 5/8” SQ. 39 1/2”
Art. 1448/3 1 3/16” SQ. 47”
Art. 1444/14 5/8” SQ. 39 1/2”
Art. 1444/16 5/8” SQ. 7 7/8” X 39 1/2”
Art. 1444/17 5/8” SQ. 5 1/2” X 39 1/2”
Art. 1435/3 33” x 13”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 772/3 Mtl. 9/16” x 5/32” BAR L 10' APPROX
Art. 772/16 Mtl 9/16” x 9/16” L 10’ Approx. Grooved
Art. 772/8 Mtl 9/16” x 9/16” 2 3/8” W. x 5 1/8” H Art. 772/9 Mtl 1" x 1" 3 3/4” W. x 7 1/16” H Art. 1443/13 Mtl 5/8” 2 61/64” W x 5 29/38” H Wt. .34 lb.
Art. 771/1 Mtl 1/8” 1 9/16” W. x 4 5/16” H
Art. 771/4 Mtl 1/8” 2 3/4” W. x 2 3/8” H
Art. 771/2 Mtl 1/8” 1 9/16” W. x 4 5/16” H
Art. 771/5 Mtl 1/8” 2 3/4” W. x 2 3/8” H
Art. 772/6 Mtl 1 9/16” x 5/16” Art. 772/7 Mtl 1 3/16” x 5/16” BAR L 10' APPROX
HANDRAIL Art. 772/2 Mtl 1 9/16” x 5/16” L 10’ Approx.
Art. 772/4 Mtl 1 9/16” x 5/16” L 10’ Approx. Art. 772/5 Mtl 1” Sq. L 10’ Approx.
ORNAMENTAL IRON DIVISION
Art. 772/13 Mtl 1/2” x 1/4” 4" dia. Art. 772/14 Mtl 1/2” x 1/4” 4 1/2” dia. Art. 772/15 Mtl 1/2” x 1/4” 5 1/8” dia.
Art. 771/11 Base 1/2” dia. 4 15/16” H
Art. 772/1 for art. Art. 772/2
Art. 771/12 Base 19/32” dia. 6 5/16” H
Art. 771/14 Base 5/8” dia. 6 5/8” H
BAR L 10' APPROX
Art. 770/3 Mtl 1/2” x 1/4” 4 3/4” W. x 8 11/16” H
Art. 770/4 Mtl 1/2” x 1/4” 4 3/4” W. x 11 7/16” H
Art. 770/5 Mtl 1/2” x 1/4” 4 3/4” W. x 14 3/16” H
Art. 770/9 Mtl1/2” x 1/4” 3 9/16” W. x 7 1/16” H
Art. 770/10 Mtl 1/2” x 1/4” 2 3/8” W. x 4 1/2” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
87
© 2010 STEEL AND PIPES, INC.
Art. 772/17 Mtl 9/16” x 9/16” L 63” Grooved
Art. 772/10 Mtl 9/16” x 9/16” 4” dia. Art. 772/11 Mtl 9/16” x 9/16” 4 1/2” dia. Art. 772/12 Mtl 9/16” x 9/16” 5 1/8” dia.
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
Art. 767/1 Mtl 1/2” x 1/4” 13 3/4” W. x 34 1/4” H
Art. 767/2 Mtl 3/4” x 1/4” 9 1/4” W. x 28 3/8” H
Art. 767/3 Mtl 3/4” x 1/4” 9 1/4” W. x 28 3/8” H
Art. 769/6 Mtl 9/16” sq. 11 13/16” W. x 35 7/16” H
Art. 769/8 Mtl 9/16” sq. 39 1/2” H
88
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Art. 769/2 Mtl 9/16” sq. 39 1/2” H Grooved
Art. 769/7 Mtl 9/16” sq. 39 1/2” H
ORNAMENTAL IRON DIVISION Art. 1444/8 Mtl 1 9/16” x 5/16” 7 7/8” W. x 39 1/2” H
Hammered Art. 769/4 Mtl 9/16” sq. 39 1/2” H
Art. 769/1 Mtl 9/16” sq. 9 1/4” W. x 39 1/2” H Grooved
Art. 769/12 Mtl 9/16” sq. 39 1/2” H
Art. 769/13 Mtl 9/16” sq. 39 1/2” H Grooved
Art. 769/5 Mtl 9/16” sq. 7 1/16” W. x 39 1/2” H
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
89
© 2010 STEEL AND PIPES, INC.
Art. 769/3 Mtl 1 9/16” x 5/16” 35 7/16” H Hammered
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
90
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION 91
© 2010 STEEL AND PIPES, INC.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
“V” GROOVED GATE WHEELS • All kinds of wheels for several capacities • Available sizes 3”, 4”, 6”
4 1/8” 3” 7” 5 1/4”
ITEM NUMBER
DESCRIPTION
ITEM NUMBER
DESCRIPTION
8.VG3
V-GROOVE WHEEL 3"
220.020.3074
GATE WHEELS 4"
• 1,320 Lbs. Capacity • No lubrication needed
• Grease fitting for lubrication • Cast Iron
ITEM NUMBER
DESCRIPTION
ITEM NUMBER
220.020.3076
GATE WHEELS 6"
8.VG4I
• Grease Fitting for Lubrication • Cast Iron
ITEM NUMBER
DESCRIPTION
8.VGBOXG 8.VGBOX6
V-GROOVE BOX 4" GALV. V-GROOVE BOX 6" GALV.
• Smooth Rubber Cylinder • Sturdy Metal Bracket DESCRIPTION
ITALIAN 4" V/G THICK 1320LB
• 1,320 Lbs. Capacity • No lubrication needed
ITEM NUMBER DESCRIPTION 8.RG3 GUIDE ROLL 3" 8.RG6 GUIDE ROLL 6"
• 3,000 Lbs. Capacity • No lubrication needed ITEM NUMBER
DESCRIPTION
ITEM NUMBER DESCRIPTION
8.VG4IB
4" WHEEL WITH BRACKET
8.VG4IH
© 2010 STEEL AND PIPES, INC.
• 3,000 Lbs. Capacity • No lubrication needed
ITEM NUMBER
8.VG6I
ITALIAN 4" V/G THICK CHROME HEAVY DUTY
DESCRIPTION
SLIDING GATE V- GROOVE TRACK ITEM NUMBER
DESCRIPTION
8.VTRACK
V-TRACK FOR GATES 20’
• Fits “V” Grooved Wheels • 1 1/4” H x 4” w x 20’-0” lenght
WHEEL 6" 160 X 30MM ART844/13
• 5,000 Lbs. Capacity • No lubrication needed
92
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
TROLLEY TRUCKS AND SLIDING DOOR HARDWARE
ALL TROLLEY TRU C ARE SOLD KS IN PAIRS
ITEM NUMBER
DESCRIPTION
ITEM NUMBER
DESCRIPTION
8.D150 8.D300
SINGLE TROLLEY FOR RAIL U-30 DOUBLE TROLLEY FOR RAIL U30
8.GUIA
DOUBLE GUIDE 35mm BRONCE
ITEM NUMBER
DESCRIPTION
220.020.051F
BRACKET RAIL FOR TROLLEY
• Galvanized steel trolley track. • Max. capacity 400 lbs.
ITEM NUMBER
DESCRIPTION
8.D700
HEAVY TROLLEY FOR RAIL U700
SLIDING DOOR TRACK
220.020.105B
DESCRIPTION
TROLLEY TRUCK “CAJA BOLA” 50C
DESCRIPTION
220.020.1606 220.020.1608 220.020.1610 220.020.1612 220.020.1614 220.020.1616 220.020.1620
TROLLEY RAIL GALV. 6L.FT TROLLEY RAIL GALV. 8L.FT TROLLEY RAIL GALV. 10L.FT TROLLEY RAIL GALV. 12L.FT TROLLEY RAIL GALV. 14L.FT TROLLEY RAIL GALV. 16L.FT TROLLEY RAIL GALV. 20L.FT
LENGHT
6’-0”LONG 8’-0”LONG 10’-0”LONG 12’-0”LONG 14’-0”LONG 16’-0”LONG 20’-0”LONG
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
93
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
ITEM NUMBER
ORNAMENTAL IRON DIVISION
HINGES BLACK STEEL, GALVANIZED • Wide variety of hinges for all kinds of work with gates • All sold in pairs STANDARD DUTY WELDABLE HINGE ITEM NUMBER
DESCRIPTION
8.1010 220.007.3535 220.007.4040
HINGE 3-1/2" X 2-1/4" HINGES BLIND 3-1/2" X 3-1/2" HINGES BLIND 4" X 4"
STEEL BARRIER HINGE ITEM NUMBER
DESCRIPTION
8.BH03
3" ROUND HINGE
EXTRA HEAVY DUTY WELDABLE HINGE ITEM NUMBER
DESCRIPTION
8.BH06
HEAVY DUTY HINGE GRAY 6"X5"
• For gates/doors up to 100lbs.
BARREL HINGES ITEM NUMBER
DESCRIPTION
8.BH05 8.BH07
5" BARREL HINGE (MEDIUM) 7" BARREL HINGE (LARGE)
• 5” For gates/doors up to 400lbs. • 7” For gates/doors up to 700lbs.
Large
© 2010 STEEL AND PIPES, INC.
BH07
ITEM NUMBER
DESCRIPTION
8.BH04
GOZNE DE PERNO 4"
• For gates/doors up to 300lbs. 1/
2Ó
3/8Ó 3/8Ó 4-7/8Ó
1Ó
1-
6-3/4Ó
• Weldable - Machined from high strength steel with a heavy duty plate welded securely on the side for easy weld-on installation. Grease fitting for easy lubrication. Ball bearing for smooth operation.
PLUG HINGE WITH RIGHT & LEFT WING
Medium
2Ó
1-3/4Ó
BH05 94
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
WHEELS
• Wheels in rubber and nylon swivel or fixed • Sizes from 2” to 10” RUBBER SWIVEL CASTER WHEELS ITEM NUMBER
DESCRIPTION
250.024.005 250.024.010 250.024.018 250.024.020 250.024.030 250.024.035
2" RUBBER SWIVEL CASTER WHEEL 3" RUBBER SWIVEL CASTER WHEEL 4" RUBBER SWIVEL CASTER WHEEL 5" RUBBER SWIVEL CASTER WHEEL 6" RUBBER SWIVEL CASTER WHEEL 8" RUBBER SWIVEL CASTER WHEEL
NYLON CASTER SWIVEL WHEEL ITEM NUMBER
DESCRIPTION
250.024.012
3" NYLON CASTER SWIVEL WHEEL
NYLON FIXED CASTER WHEEL ITEM NUMBER
250.024.017
DESCRIPTION
3" NYLON CASTER FIXED WHEEL
METAL RIM SOLID RUBBER TIRE ITEM NUMBER
DESCRIPTION
250.024.045
8" METAL RIM SOLID RUBBER TIRE
RUBBER FIXED CASTER TIRE ITEM NUMBER
250.024.025
ITEM NUMBER
DESCRIPTION
250.024.050
10" PVC RIM SOLID RUBBER TIRE
DESCRIPTION
5" RUBBER FIXED CASTER WHEEL
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
95
© 2010 STEEL AND PIPES, INC.
PVC RIM SOLID RUBBER TIRE
ORNAMENTAL IRON DIVISION
STEEL LOCKS AND BOXES
6.75” 3.5” 4.25” 4.25”
DOUBLE DEADBOLT LEVER PASSAGE W/ BLACK METAL BOX
DEADBOLT LOCK W/METAL BOX ITEM NUMBER
DESCRIPTION
220.020.6665
GATE LOCK 6665 (”CAJA CUADRADA”)
ITEM NUMBER
DESCRIPTION
8.RWSET
MOUNTED DOUBLE LOCK
3.50” 7” STEEL STANDARD SINGLE BOX
© 2010 STEEL AND PIPES, INC.
DESCRIPTION
8.C5
CAJA CERRADURA SENCILLA (P96)
2”
HOOK LOCK ITEM NUMBER
DESCRIPTION
220.020.128A
HOOK LOCK
6.75”
6.5”
YALE® LOCK PLATE ITEM NUMBER
DESCRIPTION
8.CHAPA
CHAPA CERRADURA YALE
4.25” STEEL STANDARD DOUBLE BOX
4” 96
ITEM NUMBER
ITEM NUMBER
DESCRIPTION
8.C6
CAJA CERRADURA DOBLE (P96)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
GATE AND DOOR HARDWARE
VALERO® LOCK - SATIN NICKEL ITEM NUMBER
220.633
VALERO® LOCK - SATIN NICKEL ITEM NUMBER
DESCRIPTION
VALERO® LEVER HANDLE SET IN SATIN NICKLE, KEYHOLE 85mm
220.746
DESCRIPTION
VALERO® EUROLATION LEVER HANDLE SET IN SATIN NICKLE S/S 1-1/8” ANC
VALERO® INOX LOCK ITEM NUMBER
220.768.30
VALERO® SMALL LOCK WITH HOOK 220.2001
VALERO® LOCK KEYHOLE 85mm
SIDE VIEW
DESCRIPTION
VALERO® LOCK WITH HOOK AND CYLINDER. INCLUDES BUTTERFLY KEYS
VALERO® LOCK KIT WITH HOOK ITEM NUMBER
220.778
DESCRIPTION
VALERO® LOCK WITH HOOK CHROMIUM CYLINDER
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
97
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
FRONT VIEW
DESCRIPTION
ORNAMENTAL IRON DIVISION
GATE AND DOOR HARDWARE GATE RIM LOCK/ELECTRIC LOCK ITEM NUMBER
DESCRIPTION
8.NA636 220.630.60 220.631.60 220.680.60 220.681.60
GATE RIM LOCK-TOLEDO ® GATE RIM LOCK YALE® 630.60 RIGHT GATE RIM LOCK YALE® 631.60 LEFT YALE® ELECTRIC 680.60 YALE® ELECTRIC 681.60
LEVER HANDLE LOCK SET ITEM NUMBER
DESCRIPTION
8.RWLEVER
CS502US3LH EZ SET LEVER HANDLE
INTERIOR LOCK SET ITEM NUMBER
220.LJ067
DESCRIPTION
YALE® LEVER MORTISE LOCK SET LJ067
SLIDING DOOR LOCK
DEAD BOLT LOCK ITEM NUMBER
DESCRIPTION
8.RWCL
DEADBOLT LOCK TACO
TOLEDO® STAINLESS STEEL LOCK SET ITEM NUMBER
ITEM NUMBER
DESCRIPTION
220.U9870
SLIDING DOOR LOCK U-9870
LJ067
LJ064
DESCRIPTION
220.2021N
TOLEDO® STAINLESS STEEL LOCKSET 2021N
YALE® LEVER MORTISE LOCK SET ITEM NUMBER
220.LJ087
DESCRIPTION
YALE® LEVER MORTISE LOCK SET LJ087
© 2010 STEEL AND PIPES, INC.
YALE® MORTISE HANDLE LOCK SET
98
ITEM NUMBER
DESCRIPTION
220.LJ064 220.LJ067
YALE® LEVER MORTISE LOCK SET LJ064 YALE® LEVER MORTISE LOCK SET LJ067
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION
WALL CLIPS, ANGLE BRACKETS, HAND-RAIL BRACKETS
ITEM NUMBER
8.1004
ITEM NUMBER
8.1005
DESCRIPTION
WELD TAB 1/4"X1-/2"X1-1/2"
ITEM NUMBER
8.1003
DESCRIPTION
3/8" HOLE WALL CLIP (P17)
ITEM NUMBER
DESCRIPTION
8.WT-109A
BRAKET 1/4"X2-1/2" HOLE 5/8"
ITEM NUMBER
DESCRIPTION
8.T606G
BRAKET “PASAMANO” GALVANIZED
DESCRIPTION
BRACKET 3-1/2"L 1"W L SHAPE
ITEM NUMBER
DESCRIPTION
8.3/8 DRV
3/8" X 2" “CLAVOS”/EXP ALUM.
GATE AND DOOR HARDWARE
8.HDSBG
ITEM NUMBER
DESCRIPTION
ITEM NUMBER
1/2" GALVANIZED SLIDE BOLT
8.P3
DESCRIPTION
ITEM NUMBER
8.HDSBXL XL HD SLIDE BOLT, 2-3/4" BOLT
8.P2
DESCRIPTION
SMALL SLIDE BOLT “PESTILLO ARMADO PEQ. #3”
DESCRIPTION
MEDIUM SLIDE BOLT “PESTILLO ARMADO MEDIANO DER o IZQ #2”
ITEM NUMBER
8.P1
DESCRIPTION
BIG SLIDE BOLT “PESTILLO ARMADO GRANDE #1”
ITEM NUMBER
DESCRIPTION
8.PESTILLO
PESTILLO SIN ARMAR
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
99
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
ORNAMENTAL IRON DIVISION
PLASTIC CAPS ITEM NUMBER
DESCRIPTION
210.015.0050 210.015.0075 210.015.01X1 210.015.01X2 210.015.15X15 210.016.01X1 8.2PC 8.3PC
CAPS PLASTIC 1/2" X 1/2" CAPS PLASTIC 3/4" X 3/4" CAPS PLASTIC 1" X 1" CAPS PLASTIC 1" X 2" CAPS PLASTIC 1.5 X 1.5 CAPS PLASTIC FOR 1/8"X1"X1" CAP PLASTIC 2" CAP PLASTIC 3"
PVC CAPS EXTERNAL PYRAMID CAP
BALL CAP
GOTHIC CAP
ITEM NUMBER
DESCRIPTION
PVC.3.5X3.5.EPCAP PVC.4X4.EPCAP PVC.5X5.EPCAP PVC.5X5.DFCAP
3.5X3.5 EXTERNAL PYRAMID CAP 4" X 4" EXTERNAL PYRAMID CAP (C-4R9-W) 5" X 5" EXTERNAL PYRAMID CAP (C-5R9-W) PVC 5" X 5" DEEP FLANGE CAP
ITEM NUMBER
DESCRIPTION
PVC.4X4.BALLCAP PVC.5X5.BALLCAP
PVC BALL CAP WHITE 4" X 4" PVC BALL CAP WHITE 5” X 5”
ITEM NUMBER
DESCRIPTION
PVC.35X35.GOTHCAPS PVC.4X4.GOTHCAPS PVC.5X5.GOTHCAPS PVC.5X5.GOTHCAPALM
3.5" X 3.5" GOTHIC CAP WHITE 4” X 4” GOTHIC CAP WHITE 5" X 5" GOTHIC CAP WHITE 5" X 5" GOTHIC CAP ALMOND
ITEM NUMBER
NEW ENGLAND CAP
PVC.35X35.NECAP PVC.4X4.NECAP PVC.5X5.NECAP PVC.5X5.NECAPALM
DESCRIPTION
3.5" X 3.5" CAP NEW ENGLAND 4"X4" NEW ENGLAND CAP PVC 5"X5" NEW ENGLAND CAP WHITE 5"X5" NEW ENGLAND CAP ALMOND
PICKET CAP
© 2010 STEEL AND PIPES, INC.
PERGOLA CAP ITEM NUMBER
PVC.175X35.CAP PVC.2X6.CAP
100
DESCRIPTION
PERGOLA CAP FOR 1-3/4"X3-1/2" PERGOLA CAP 2" X 6"
ITEM NUMBER
DESCRIPTION
PVC.15X15.CAP
1.5"X1.5" PICKET CAP WHITE
PERGOLA CLIP ITEM NUMBER
DESCRIPTION
PVC.2X2.CLIP
PERGOLA CLIPS 2" X 2"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION 101
© 2010 STEEL AND PIPES, INC.
IDEAS...
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
IDEAS...
102
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION 103
© 2010 STEEL AND PIPES, INC.
IDEAS...
ORNAMENTAL IRON DIVISION © 2010 STEEL AND PIPES, INC.
IDEAS...
104
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ORNAMENTAL IRON DIVISION 105
© 2010 STEEL AND PIPES, INC.
IDEAS...
Puertas de Garaje PUERTAS DE GARAJE RESIDENCIALES •TRASLUCIENTE •LIVIANAS •TRANSMITEN HASTA UN 73% DE CLARIDAD DE LA LUZ SOLAR
3 COLORES A ESCOGER • BRONZE • BLANCO • “STAINLESS STEEL”
PUERTAS DE GARAJE RESIDENCIALES “PROTÉGÉ”
• RANCH
• COLONIAL
• RIBBED
• FLUSH
PUERTAS DE GARAJE COMERCIALES Y RESIDENCIALES • “ROLLING DOORS” • PUERTAS DE GARAJE RESISTENTE AL FUEGO • PUERTAS DE GARAJE SECCIONALES
Vendemos los herrajes de puertas de garajes al por mayor. ¡Pregúntanos!
Motores Para Portones y Puertas De Garaje MOTORES CON SISTEMA SOLAR ECOSOL, SISTEMAS “TELE-ENTRY”, ACCESORIOS Y MUCHO MAS... SISTEMAS “TELE-ENTRY” BATERIA DE RESERVA INTEGRADA
3/4 HP WD962KD
Whisper Drive Plus 1/2 HP PD210D
• SERIES MODELO 1810 • SERIES MODELO 1812 • SERIES MODELO 1837
• ECOSOL NO UTILIZA CORRIENTE ELECTRICA Y PUEDE UTILIZARSE CON TODOS LOS ACTIVADORES BFT DE BAJA TENSION
• SERIES DEIMOS • SERIES PHOBOS
• SERIES MODELO 1835
DECORATIVE METAL PANELS
DIVISION
DECORATIVE METAL PANELS DIVISION
GRIP-STRUTS GRIP STRUT® Plank contains diamond shaped openings with serrated teeth providing a safe, slip resistant surface that grabs in all directions. They come in 12 ' -0”of length • If you need less than 12’-0” we can surely sell you the lenght needed cut to size. • Available in aluminium and galvanized ASK US!!! TALL
2’’
ITEM NUMBER 056.014.1212 056.014.1912 058.080.1012
DESCRIPTION GRIP STRUT GALV. G14 X 11-3/4” X 2” TALL X 12’ GRIP STRUT GALV. G14 X 18-3/4” X 2” TALL X 12’ GRIP STRUT ALUM .080” X 9-1/2” X 2” TALL X 12’
WIRE CLOTH LOCK CRIMP • .120” Wire width • 1” x 1” Square Hole • Galvanized Steel • 4’- 0” x 8’-0” Sheets ITEM NUMBER
DESCRIPTION
044.101.0408 044.201.0408
WIRE CLOTH LOCK CRIMP GALV .120” WIRE X 1” X 1” X 4’ X 8’ WIRE CLOTH LOCK CRIMP GALV .120" WIRE X 2" X 2" X 4’ X 8’
WIRE CLOTH WELDED
© 2010 STEEL AND PIPES, INC.
• .120” Wire width • 1” x 1” Square Hole • Galvanized Steel • 4’- 0” x 8’-0” Sheets ITEM NUMBER 044.100.0408 044.200.0408
108
DESCRIPTION WIRE CLOTH WELDED GALV. 120” WIRE X 1” X 1” X 4’ X 8’ WIRE CLOTH WELDED GALV. 120" WIRE X 2" X 2" X 4' X 8'
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
045.030.0100 PERF. BLK. LA CRUZ G.22 x 4’ x 8’
045.020.1013 PERF. GALV. WEAVE 10-PD G.22 x 4’ x 8’
045.022.0255 PERF. GALV. DIAMOND HOLE G.22 x 4’ x 8’
045.020.0125 PERF. GALV. G20, 1/8” HOLE, 3/16” STG 4’ x 8’
045.016.0250 PERF. GALV. G16, 1/4” HOLE, 3/8” STG 4’ x 8’
045.018.0500 PERF. GALV. G18, 1/2” HOLE, 11/16” STG 4’ x 8’
045.001.7018 LOUVER BLK. G.18, 70-18, 4’ x 8’
045.022.0250 PERF. GALV. SQUARE HOLE 1/4”, G.22 x 4’ x 8’
045.021.0250 PERF. ALUM. SQUARE HOLE 1/4” (.049”) 4’ X 8’
045.010.0420 PERF. GALV. OBLONGO 4mm x 20mm, G.20 4’ x 8’
045.010.0620 PERF. GALV. OBLONGO 6mm x 20mm, G.22 x 4’ x 8’
045.001.7514 MINI LOUVER BLK. G.14, 75-14, 4’ x 8’
045.001.9414 LOUVER BLK. G.14, 94-14, 4’ x 8’
040.090.1500 EXP. METAL BLK. GRANADA 4’ x 8’
U-CHANNEL GALV. 043.200.0250 - 1” x 1/4” x 12’ 043.200.0632 - 1” x 1/16” x 12’ 043.200.0125 - 1” x 1/8” x 12’ 043.200.0124 - 1/2” x 1/8” x 12’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
109
DECORATIVE METAL PANELS DIVISION
045.030.0150 PERF. BLK. MALTES G.22 x 4’ x 8’
© 2010 STEEL AND PIPES, INC.
PERFORATED METALS
DECORATIVE METAL PANELS DIVISION
EXPANDED METALS FLATTENED BLACK OR GALVANIZED “STOCK SHEETS OR CUT-TO-SIZE!” Photos may not be actual size due to printing process.
040.100.1501 EXP METAL BLK. FLAT 3/4” X #16 - 4’ x 8’
041.075.1500 EXP METAL BLK. FLAT 3/4” X #9 - 4’ x 8’
041.075.1501 EXP METAL BLK. FLAT 1.5” X #9 - 4’ x 8’
041.075.1400 EXP METAL BLK. FLAT 3/4” X #13 - 4’ x 8’
042.100.1401 EXP METAL GALV. FLAT 3/4” X #16 - 4’ x 8’
042.100.1500 EXP METAL GALV. FLAT 3/4” X #9 - 4’ x 8’
042.100.1501 EXP METAL GALV. FLAT 1.5” X #9 - 4’ x 8’
042.100.1498 EXP METAL GALV. FLAT 3/4” X #13 - 4’ x 8’
040.100.1500 EXP METAL BLK. FLAT 1/2” X #16 - 4’ x 8’ 042.100.1400 EXP METAL GALV. FLAT 1/2” X #16 - 4’ x 8’
EXPANDED GRATING
© 2010 STEEL AND PIPES, INC.
It is ideal for parking garages, sidewalks, and pedestrian accessible roadways where ventilation or drainage is required.
110
040.077.1501 EXP METAL GRAT BLK. 3/16” X #3 - 4’ x 8’
040.078.1501 EXP METAL GRAT BLK. 1/4” X #4 - 4’ x 8’
043.077.1501 EXP METAL GRAT GALV. 3/16” X #3 - 4’ x 8’
043.078.1501 EXP METAL GRAT GALV. 1/4” X #4 - 4’ x 8’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT TOOLS & HAND TOOLS
DIVISION
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
ship all in-stock items within 24 hours to y All warranty parts, if available are shipped order is received.
SERVICE DEPARTMENT
Plasma Cutting And Welding Machines • Repair • Parts • Service
© 2010 STEEL AND PIPES, INC.
We Repair Your Machine In The Least Time Possible!
112
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
STICK ELECTRODES/MILD AND LOW ALLOY STICK ELECTRODES E7018 (WIZ 18 S) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-4) ABS (Grado 3H, 3Y), Lloyd´s (Grado 3) • Basic, low hydrogen iron powder electrode • Highest quality weld metal • Low spatter loss • High operator appeal • Outstanding out-of-position welding • Works with DC+ and AC (78 OCV)
PRODUCT NUMBER
219.10.00064 219.10.00072 219.10.00074
RECOMMENDED AMPERAGE
DIAMETER(IN)
2.4 x 350 mm (3/32”) 3.2x350mm (1/8”) 4.0x350 mm (5/32”) 4.8x350mm (3/16”)
70-100 A 100-145 A 135-200 A 170-270 A
STICK ELECTRODES E6011 (ACP 611 SS) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-3) ABS (Grade 2), Lloyd’s (Grade 2)
PRODUCT NUMBER
• All-position high cellulose electrode • General purpose versatile electrode • High penetration, root pass applications • Works on AC and DC+ • Easy strike and re-strike
RECOMMENDED AMPERAGE
DIAMETER(IN)
2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)
50 - 80 A 70 -115 A 90 -160 A
STICK ELECTRODES E6013 (SW10) SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-1) • Smooth running general-purpose electrode • All-position rutile type electrode • High welder appeal • StabÍe arc even with low voltage power sources on AC • Ideal for welding thin steel sections • Easy strike and re-strike • Excellent metal wash into plate • Excellent slag detachability
PRODUCT NUMBER
DIAMETER(IN)
219.10.00019 219.10.00024
2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0x350mm (5/32”)
RECOMMENDED AMPERAGE
60-100 A 90-130 A 120-160 A
STICK ELECTRODES E6010 (ZIP 10 P)
STICK ELECTRODES E7024 (ZIP 24)
SPECIFICATION DATA: AWS A5.1, ASME SFA 5.1 (A-1, F-3)
SPECIFICATION DATA: AWS A5.1, ASME SFA 51 (A-1, F-1) ABS (Grade 1), Lloyd’s
• All-position high cellulose DC electrode • General purpose versatile electrode • Deep penetrating arc • Easy strike and re-strike
219.10.00004
DIAMETER(IN)
2.4 x 350 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)
RECOMMENDED AMPERAGE
50-80 A 70-115 A 90-160 A
PRODUCT NUMBER
219.10.00084
DIAMETER(IN)
3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)
RECOMMENDED AMPERAGE
140 - 180 A 180 - 250 A
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
113
© 2010 STEEL AND PIPES, INC.
PRODUCT NUMBER
• High iron powder rutile electrode • High productivity butt and filIet welding in all downhand positions • Works with AC, DC+ and DC• Self releasing slag • High operator appeal • Easy strike and re-strike
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
STICK ELECTRODES/CAST IRON/STAINLESS STEEL NIQUEL 100 (ENICI) SPECIFICATION DATA: AWS A5.15, ASME SFA 5.15 • Operation in a gentle way smooth operation • Minimum cracks • Easy machinability • Easy slag removal • Application with alternating and continuous current work in both DC and AC
PRODUCT NUMBER
DIAMETER(IN)
RECOMMENDED AMPERAGE
2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”)
40-80 A 55-100 A 90-150 A
DIAMETER(IN)
RECOMMENDED AMPERAGE
CROMARCO 309L-16 PREMIUM (E309L-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Easy application, doesn’t stick • Can be dragged on the part • Sold arc less spatter and produces less splash • Slag removal and even in flat position is often casy slong removal • Higher performance in a single pass in flat position self removable • Application with Ac and DC • Contains 22-25% Cr and 12-14% Ni.
PRODUCT NUMBER
2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)
40-80 A 70-110 A 100-145 A 130-180 A
CROMARCO 312-16 PREMIUM (E312-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Works in all positions • Can be dragged to the piece and doesn’t stick • Excellent mechanical resistance • Very good resistance to corrosion • Good resistance to friction metal - metal • Deposit machinable • Contains 28-32% Cr and 8 - 10.5% Ni.
PRODUCT NUMBER
DIAMETER(IN)
2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)
RECOMMENDED AMPERAGE
40-80 A 70-110 A 100-145 A 130-180 A
© 2010 STEEL AND PIPES, INC.
CROMARCO 308L-16 PREMIUM (E308L-16) SPECIFICATION DATA: AWS A5.4, ASME SFA 5.4 • Good resistance to intergranular corrosion • Easy application, electrode doesn’t stick • Can be dragged on the part • Smooth are and less spatter and produces less splash Even in flat position is easy slag removal, self removable • Deposit welding is flat • Higher performance in a single pass in flat position • Application with AC and DC Contains 18-21% Cr and 9-11% Ni.
114
PRODUCT NUMBER
DIAMETER(IN)
2.4 x 300 mm (3/32”) 3.2 x 350 mm (1/8”) 4.0 x 350 mm (5/32”) 4.8 x 350 mm (3/16”)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
RECOMMENDED AMPERAGE
40-80 A 70-110 A 100-145 A 130-180 A
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
STICK ELECTRODES/MILD AND LOW ALLOY ELECTRODE E6010 (FLEETWELD 5P) Fleetweld® 5P is a great choice for welding on dirty, rusty, greasy or painted steel especially in vertical or overhead applications. PRODUCT • All-position, particularly good for vertical and overhead. • Light slag with little slag interference for easy arc control. • Deep penetration with maximum admixture. NUMBER • Capable of x-ray quality welds, out-of-position. 219.10.00001 AWS Classifications: E6010 219.10.00005 Recommended Polarity: DC+ 219.10.00010
DIAMETER(IN)
3/32 1/18 5/32
WEIGHT
50LB. 50LB. 50LB.
ELECTRODE E6013 (FLEETWELD 37) Here’s a terrific all-position electrode for low amp welding on sheet metal especially in applications where appearance is important. We’ve designed Fleetweld 37 for excellent performance with smaller AC welders with low open-circuit voltages. It’s an excellent choice for jobs involving irregular or short welds that require a change in position. • An all position electrode for the welding of mild steel. • Excellent choice for sheet metal lap and fillet welds. • Superior slag control, which makes it a great choice for vertical down. AWS Classifications: E6013 Recommended Polarity: AC/DC±
PRODUCT NUMBER
DIAMETER(IN)
219.10.00020 219.10.00025 219.10.00030
WEIGHT
3/32 1/1 5/32
50LB. 50LB. 50LB.
ELECTRODE E7018 (JET-LH 78 MR) Great for jobs on mild steel and some high-strength low-alloy steels. It also tolerates high sulfur and high silicon steels. Jet-LH 78 MR features higher tensile strength for the stress-relieved properties. • Designed for welding mild steel and high strength low alloy steels. • Also, tolerates high sulfur and high silicon steels, which have poor weldability. • Capable of x-ray quality welds. • Low hydrogen may reduce the need for preheat or postheat. • Shipped in hermetically sealed containers, which can be stored indefinitely in normal conditions, without danger of moisture pickup. AWS Classifications: E7018 Recommrnded Polarity: AC/DC+
PRODUCT NUMBER
219.10.00060 219.10.00065 219.10.00070 219.10.00075
DIAMETER(IN)
3/32 1/18 5/32 3/16
WEIGHT
50LB. 50LB. 50LB. 50LB.
ELECTRODE E7018AC
PRODUCT NUMBER
219.10.00062 219.10.00067
DIAMETER(IN)
3/32 1/18
WEIGHT
50LB. 50LB.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
115
© 2010 STEEL AND PIPES, INC.
This electrode performs beautifully either way! Lincoln 7018AC is a great choice for low open circuit voltage AC power sources. Cold re-strikes are no problem with this versatile, all-position electrode. • Designed for welding mild steel and many low alloy steels. • All position welding with good deposit rates. • Flat or slightly convex beads have distinct ripples with little spatter. • Good low current and low open circuit voltage operation. AWS Classifications: E7018-H8 Recommended Polarity: AC/DC±
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
STICK ELECTRODES/MILD AND LOW ALLOY ELECTRODE EXCALIBUR E9018-B3 MR Excalibur 9018-B3 MR is a low hydrogen stick electrode designed for all-position welding of 2.25% chrome, 1% molybdenum low alloy steels. • Enhanced Arc Performance -Smooth arc and square coating burn-off for improved puddle control and visibility. • Minimize starting porosity and grinding time while maximizing productivity. • Fast clean-up for higher productivity and quality. • Stress-Relieved Mechanical Performance -Capable of exceeding AWS minimum requirement of 90 ksi (620 MPa) tensile strength after 8 hours at 1275°F (690°C). AWS Classifications: E9018-B3 H4R Recommended Polarity: AC
PRODUCT NUMBER
DIAMETER(IN)
219.10.00105 219.10.00106
1/8 5/32
WEIGHT
50LB. 50LB.
ELECTRODE EXCALIBUR E11018M MR Excalibur® 11018M MR™ is designed primarily for joining high strength steel types in the as-welded or stress relieved conditions with excellent low temperature impact properties and robust welding procedures. All-position welding, except vertical down. • Integrated Silicate Technology™ -Increased moisture resistance and decreased coating fragility. PRODUCT • Easy Strike™ Tip -Consistent, smooth arc starts. NUMBER • Square Burn-Off -Focused arc for hard to access welds. 219.10.00108 • X-Ray Quality -Demanding applications. • Hermetically Sealed Packaging – Easy Open Cans • Delivers quality product, performance reliability and consistent results. AWS Classifications: E11018M-H4R Recommended Polarity: AC/DC+
DIAMETER(IN)
1/8
WEIGHT
50LB.
STICK ELECTRODES/CAST IRON ELECTRODE SOFTWELD 99 NI (ENI-CL) A high nickel electrode specifically recommended for applicationswhere machinability is important. Even single pass welds aremachinable. It is recommended for surfacing applications and repairing small casting defects when the deposit willrequire machining. • For cast iron applications where machinability is important. • Designed for single and multiple pass stick welding. AWS Classifications: Eni-Cl Recommended Polarity: AC/DC+
© 2010 STEEL AND PIPES, INC.
PRODUCT NUMBER
219.10.00200 219.10.00205
116
DIAMETER(IN)
3/32 1/8
WEIGHT
10LB. 10LB.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MIG/MILD AND LOW ALLOY SUPERARC L-56 (ER70S-6) MILD STEEL MIG WIRE Lincoln’s premium copper coated MIG wire, SuperArc L-56 isan excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of SuperArc L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends. • MicroGuard® Ultra surface treatment for superior feeding and arc enhancement agents for excellent arc stability. • Copper coating provides superior arc starting characteristics, for long contact tip life and is manufactured not to flake, which can clog liners and contact tips. • Will support all of the traditional modes of GMAW metal transfer: short circuiting, globular, axial spray, and pulsed spray transfer. • Well suited for applications where accurate and consistent wire feed are necessary. • Excellent spatter control and bead profile. AWS Classifications: ER70S-6 Recommended Polarity: DC+
PRODUCT NUMBER
DIAMETER(IN)
219.10.00395 219.10.00397
WEIGHT
L56 L56
2 LB. 33 LB.
ALLOY ER70S-6 MIG WIRE ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for butt and fillet welding of sheet and plate of a variety of thickness. Applications include general carbon steel fabrication. AWS Classifications: ER70S-6 Recommended Polarity: DC+
PRODUCT NUMBER
DIAMETER(IN)
219.10.00379 219.10.00380 219.10.00383 219.10.00384 219.10.00386 219.10.00387
WEIGHT
L56-035 L56-045 L56-030 L56-035 L56-030 L56-035
2 LB. 25 LB. 11 LB. 11 LB. 33 LB. 33 LB.
MIG/ALUMINUM ALLOY ER5356 MIG WIRE
PRODUCT NUMBER
219.10.00460 219.10.00465 219.10.00466 219.10.00476
DIAMETER(IN)
0.030 0.035 0.035 3/64
WEIGHT
1 lb. 1 lb. 16 lb. 16 lb.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
117
© 2010 STEEL AND PIPES, INC.
Inweld 5356 is a 5% magnesium alloyed aluminum welding wire. A great general purpose filler alloy, designed for the welding of 5XXX series alloys, when 276 Mpa (40 ksi) tensile strength is notrequired. Excellent color match after anodizing. Inweld 5356 offers much better corrosion resistance when exposed to saltwater. Average tensile strength as welded is 38,000 psi. AWS Classifications: ER5356 Recommended Polarity: AC/DC+
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MIG/STAINLESS STEEL ALLOY ER316L MIG WIRE This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent max.) in ER316L reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as columbium (niobium) or titanium. It is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. AFM ER316L, however, is not as strong at elevated temperature as the columbium (niobium) - stabilized alloys or Type ER316H. AWS Classifications: ER316L Recommended Polarity: AC/DC+
PRODUCT NUMBER
219.10.00421 219.10.00422 219.10.00424
DIAMETER(IN)
0.030 0.035 0.035
WEIGHT
2 lb. 2 lb. 25 lb.
ALLOY ER4043 MIG WIRE Inweld 4043 is a 5% silicon alloyed aluminum welding wire forthe welding of heat-treatable base alloys and more specifically, the 6XXX series alloys. It can also be used for joining wroughtto cast materials and is less sensitive to weld cracking. Silicon inthe wire increases puddle fluidity, resulting in excellent operator appeal. Inweld 4043 is also recommended for welding 3003,3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Average tensile strength as welded is 29,000 psi. AWS Classifications: ER4043 Recommended Polarity: DC+
PRODUCT NUMBER
219.10.00435 219.10.00440 219.10.00445 219.10.00447 219.10.00451
DIAMETER(IN)
0.030 0.035 3/64 0.035 3/64
WEIGHT
1 lb. 1 lb. 1 lb. 15 lb. 15 lb.
Rent Welding Machines! • Innovative Solutions. • Performance and Reliability “Extreme Duty™” • Full range of rental welding machines. • Cost Effective.
Red-D-Arc Welderentals © 2010 STEEL AND PIPES, INC.
We are the only representatives in Puerto Rico.
We are your Industrial Supermarket • www.steelandpipes.com
118
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TIG/MILD AND LOW ALLOYS ALLOY ER70S-2 WELDING WIRE ER70S-2 is used primarily for single-pass welding of killed, semi-killed, and rimmed steels, but may also be used for somemulti-pass applications. Because of the added deoxidants, ER70S-2 can be used for welding steels that have a rusty ordirty surface, with a possible sacrifice of weld quality depending on the condition of the surface. AWS Classifications: ER70S-2 Recommended Polarity: DC-
PRODUCT NUMBER
219.10.003000 219.10.00300 219.10.00301
DIAMETER(IN)
1/16 3/32 1/8
WEIGHT
10 lb. 10 lb. 10 lb.
ALLOY ER70S-6 WELDING WIRE ER70S-6 contains higher levels of manganese and silicon thanthe other standard grades of TIG wire. This wire features excellenttolerance of rust and scale, produces the highest deposit strengthof all the carbon steel TIG wires. ER70S-6 is used for butt andfillet welding of sheet and plate of a variety of thickness.Applications include general carbon steel fabrication. AWS Classifications: ER70S-6 Recommended Polarity: DC-
PRODUCT NUMBER
219.10.00303 219.10.00302 219.10.00304
DIAMETER(IN)
1/16 3/32 1/8
WEIGHT
10 lb. 10 lb. 10 lb.
ALLOY ER80S-B2 WELDING WIRE ER80S-B2 is used to weld 1/2Cr-1/2Mo, 1Cr-1/2Mo, and 1-1/4Cr1/2Mo steels for elevated temperatures and corrosiveservice. It is also used for joining dissimilar combinations of Cr-Mo and carbon steels. Careful control of preheat, interpasstemperatures, and postheat is essential to avoid cracking.ER80S-B2 is classified after postweld heat treatment. Specialcare must be used when using it in the as welded condition due to higher strength levels. AWS Classifications: ER80S-B2 Recommended Polarity: DC-
PRODUCT NUMBER
219.10.00344 219.10.00343
DIAMETER(IN)
1/16 3/32
WEIGHT
10 lb. 10 lb.
CONSUMABLES FOR WELDING /ARC GOUGING CARBON ELECTRODE ARC AIR GOUGING CARBON ELECTRODE
- Box of 50 rods.
PRODUCT NUMBER
219.10.00280 219.10.00281
DIAMETER(IN)
3/16 1/4
WEIGHT
12 12
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
119
© 2010 STEEL AND PIPES, INC.
DC Copper Coated Pointed Arc air gouging carbon electrode is well applied in gouging lowcarbon steel, cast, stainless steel, copper in wide ranges, such as shipbuilding, casting, boiler-making, pressure vessel, etc. Arc air gouging carbon electrodes show the following advantages: high efficiency, low noise, smooth plane, economic cost, high endurance and broad application.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TIG/STAINLESS STEEL
ALLOY ER308L WELDING WIRE
ER308L stainless steel TIG welding wire. For the joining of commonaustenitic stainless steels such as types 304, 304L, 321, CF-8, and CF-3. Provides good resistance to intergranular corrosion. AWS Classifications: ER308L Recommended Polarity: DCPRODUCT NUMBER
219.10.00305 219.10.00310 219.10.00315
ALLOY ER309L WELDING WIRE ER309L is the same classification as ER309, except for the lowcarbon content. Low carbon (0.03 % max) in this filler metal reduces the possibility of intergranular carbide precipitation. This increases the resistance to intergranular corrosion without the use of stabilizers such as columbium (niobium) or titanium.Strength of this low-carbon alloy, however, may not be as great at elevated temperatures as that of the columbium (niobium) stabilized alloys or ER309. AWS Classifications: ER309L Recommended Polarity: DCPRODUCT NUMBER
219.10.00320 219.10.00325
DIAMETER(IN)
3/32 1/8
WEIGHT
10 lb. 10 lb.
DIAMETER(IN)
1/16 3/32 1/8
ALLOY ER316L WELDING WIRE
PRODUCT NUMBER
219.10.00330 219.10.00335 219.10.00340
DIAMETER(IN)
1/16 3/32 1/8
TIG ELECTRODES (EWP) PRODUCT NUMBER
219.10.00296 219.10.00298 219.10.00299
DIAMETER(IN)
1/16 3/32 1/8
© 2010 STEEL AND PIPES, INC.
TIG ELECTRODES (EWTH-2) The most common electrode used today. EWTh-2 or 2% Thoriated Tungsten Electrodes contain a nominal 2 wt-% of thorium oxide (ThO2) which is evenly dispersed throughout the entire length of each rod. Offers excellent resistance from weld pool contamination, a stable ARC and easy starting capabilities. Generally used on DC electrodes negative or straight polarity. Principally used on: Carbon steels, Stainless Steels, Nickel, Nickel Alloys, Titanium, Copper Alloys AWS Classifications: EWTh-2 Recommended Polarity: DC-
120
10 lb. 10 lb. 10 lb.
This classification is the same as ER316, except for the carboncontent. Low carbon (0.03 percent max.) in ER316L reduces thepossibility of intergranular chromium carbide precipitation andthereby increases the resistance to intergranular corrosion withoutthe use of stabilizers such as columbium (niobium) or titanium. It is primarily used for welding low-carbon molybdenum-bearingaustenitic alloys. AFM ER316L, however, is not as strong at elevated temperature as the columbium (niobium)-stabilized alloysor Type ER316H. AWS Classifications: ER316LC Recommended Polarity: DC-
TIG/TUNGSTEN ELECTRODES Pure tungsten electrodes the one without any addition of oxide. This allows the tip to form a clean, balled end which provides good arc stability on AC. The power of electronic transgression is as high as 4.5ev. Requiring a high voltage for arc derivation, it has a low current capacity and is easily burnt. It’s good for application under the condition of AC and in the situation of low welding requirements. It is generally used in the welding of aluminum and magnesium alloys (AC) and used under alternating current. AWS Classifications: EWP Recommended Polarity: AC
WEIGHT
PRODUCT NUMBER
219.10.00290 219.10.00292 219.10.00294
DIAMETER(IN)
1/16 3/32 1/8
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WEIGHT
10 lb. 10 lb. 10 lb.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CONSUMABLES FOR WELDING/TIG ALLOY ER4043 5% Silicon Alloyed Aluminum Welding Wire Inweld 4043 is a 5% silicon alloyed aluminum welding wire for the welding of heat-treatable base alloys and more specifically, the 6XXX series alloys. It can also be used for joining wrought to cast materials and is less sensitive to weld cracking. Silicon in the wire increases puddle fluidity, resulting in excellent operator appeal. Average tensile strength as welded is 29,000 psi. AWS Class: ER4043 Polarity: AC PRODUCT NUMBER
219.10.00435 219.10.00440 219.10.00449 219.10.00451
DIAMETER(IN)
WEIGHT
.030 .035 3/64 3/64
1 lb. 1 lb. 1 lb. 16 lb.
ALLOY ER5356 5% Magnesium Alloyed Aluminum Welding Wire Inweld 5356 is a 5% magnesium alloyed aluminum welding wire. A great general purpose filler alloy, designed for the welding of 5XXX series alloys, when 276 Mpa (40 ksi) tensile strength is not required. Excellent color match after anodizing. Inweld 5356 offers much better corrosion resistance when exposed to salt water. Average tensile strength as welded is 38,000 psi. AWS Class: ER5356 Polarity: AC PRODUCT NUMBER
219.10.00460 219.10.00465 219.10.00476
DIAMETER(IN)
.030 .035 3/64
WEIGHT
1 lb. 1 lb. 1 lb.
NICKEL ELECTRODE NI 99 (ERNI-1) Nickel 99 is recommended for welding of thin cast iron sections where maximum machinability is required. Since the wire is approximately 99% nickel, weld deposits are basically “soft” and can be shaped, milled, drilled, or tapped, while the color will match that of cast iron. Nickel 99 is specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels. AWS Class: ERNi-1 Polarity: DC219.10.00200 219.10.00205
DIAMETER(IN)
1/8 3/32
WEIGHT
10 lb. 10 lb.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
121
© 2010 STEEL AND PIPES, INC.
PRODUCT NUMBER
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MARKERS AND CRAYONS
ROD OVEN
YELLOW BALL PAINT MARKER ITEM CODE
DESCRIPTION
219.15.RF55181
YELLOW MARKER BALL POINT RED FORCE • Weather-and fade-resistant marls dry in 5 minutes • Ideal for color coding, inspection, shipping, identification, assembly and fabrication • Plastic cap keeps tip clean between jobs • Marking range: (-46˚C-66˚C)
CRAYONS ITEM CODE
DESCRIPTION
219.15.RF55184 219.15.RF55185 219.15.RF55186 219.15.RF55187
TEMP STICK 150 F TEMP STICK 250 F TEMP STICK 300 F TEMP STICK 400 F
RED FORCE RED FORCE RED FORCE RED FORCE
ROD OVEN WELDERS PENCIL ITEM CODE
DESCRIPTION
219.15.RF55182
WELDERS PENCIL (PACK OF 3) RED FORCE
METALLIC MARKERS ITEM CODE
219.15.RF55179 219.15.RF55180
ITEM CODE
DESCRIPTION
219.09.00750
ROD OVEN K-50/ 120V
• These lightweight ovens are designed to protect electrodes during transfer from the holding oven to the job. • They are light and easy to carry. • Safety -yellow color ensures high visibility. • Durable steel body
DESCRIPTION
WHITE METALLIC MARKER RED FORCE YELLOW METALLIC MARKER RED FORCE
• Marks with real paint, dries in minutes • Valve-actuated system delivers paint as needed for continuous marking • Weather-, water-and UV resistant marks • Lead-free paint • Marking range: (-46˚C-66˚C)
BLACK MARKER ITEM CODE
ITEM CODE SPECIFICATIONS:
MODEL ELECTRODE CAPACITY HEATING ELEMENT VOLTAGE TEMPERATURE RANGE THERMOSTAT ELECTRODE LENGTH 500MM WEIGHT OVERALL SIZE (L x W x H)
DESCRIPTION
© 2010 STEEL AND PIPES, INC.
219.15.RF55178
BLACK MARKER (PACK OF 3) RED FORCE • Ideal for line marking • Smear-resistant, water=resistant, fast drying • For identification of parts, layout work, and marking cartons and crates
122
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
PE-5 25 KG 700W WIRE WRAP AC 240V AC/DC 60V-120V 50˚C-150˚C ADJUSTABLE THERMOSTAT WITH HIGH LIMIT SWITCH 13.1KG 360x285x580MM
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
WELDING TOOLS LOCKING C-CLAMPS WITH SWIVEL PADS Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface PRODUCT NO.
MODEL
JAW CAPACITY
SIZE
250.021.004 250.021.005 250.021.006
11SP® 6SP™ 9SP™
3-3/8" (85 mm) 2-1/8" (54 mm) 4-1/2" (112 mm)
11" (275 mm) 6" (150 mm) 9" (225 mm)
219.09.00200 CHIPPING HAMMER • Pick and Chisel with Wire Spring Handle. • Drop Forged, Heat-Treated Heads. • Welded-on Head. • Individual sale
SARGENTS SIZES
219.09.00201 WOOD CHIPPING HAMMER • Pick and Chisel with Wood Handle. • Individual sale
219.09.00402 219.09.00404 219.09.00406 219.09.00408 219.09.00410 219.09.00412
2” 4” 6” 8” 10” 12”
219.07.0170 10-WAY CYLINDER WRENCH • Sizes from 7/8” to 1 1/8” for regulators, torches and commercial acetylene cylinders, with a square 3/8” welded socket.
• Designed to work as an extra hand - enables fast and accurateholding of any ferrous object • Mag ToolTM will hold both sheet and tube at anglesof 45°, 90° and 135° • Compact design allows use in tight places • Handy Mag ToolTM - can be used as double-sided holder for weldingand assembly work • Ideal for use as work-holder and positioner in welding, soldering,marking-off, pipe installation, supporting, jigging, assembly, as aseparator, multi-units for heavy weldments, lifting etc. • Caution! Do not use with DC current when welding
MAG-TOOL, X-LARGE
10
DIMENSIONS 7-9" x 5" x 0.88" (20 x 12.5 x 21 cm)
SUPPORTS UP TO 122 lb. (55 Kg)
DIRECT LIFTS (EACH ANGLE)** 48.5 lb. (22 Kg)
NET WEIGHT 2.75 lb. (1.25 Kg)
MAGNET: ANISOTROPIC FERRITE ••In Contact with Ferrous Objects of Adequate Thickness and Smooth Surface Finish
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
123
© 2010 STEEL AND PIPES, INC.
250.021.2000 MAG TOOL™ : MULTI-PURPOSE MAGNETIC HOLDER 50LB-LARGE
M-065 013473
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
WELDING TOOLS SINGLE FLINT SPARK LIGHTERS
• This lighter feature the largest hood and round file in the industry, with a patented assembly. Used by more welders than any other, it's enduring popularity is merited by dependable performance, ease of operation, light weight, and low cost. CODE
PART. NO.
219.07.0165
2001 2001X
DESCRIPTION
SINGLE FLINT LIGHTER 6/40 THREAD SINGLE FLINT RENEWALS
POINT OF PURCHASE CARDS CODE
PART. NO.
219.07.0160
2011 2021 2031 2011X 2021X
DESCRIPTION
SINGLE FLINT LIGHTER SINGLE FLINT LIGHTER W/5 RENEWALS SINGLE FLINT LIGHTER W/10 RENEWALS SINGLE FLINT RENEWALS -5 PER CARD SINGLE FLINT RENEWALS -10 PER CARD
TRIPLE FLINT SPARK LIGHTERS • Value well worth the price is built into this superb welders' lighter by the rugged frame, three large flints, long lasting round file and bright plated finish. It will supply a profusion of hot sparks for dependable ignition under all working conditions. CODE
PART. NO.
219.07.0167
4501
DESCRIPTION
THREE FLINT LIGHTER
POINT OF PURCHASE CARDS CODE
PART. NO.
219.07.0168
5011 5021 5003X 5012X
DESCRIPTION
THREE FLINT LIGHTER THREE FLINT LIGHTER W/4 RENEWALS THREE FLINT RENEWALS - 1 PER CARD THREE FLINT RENEWALS - 4 PER CARD
SOAPSTONE HOLDER FLAT
© 2010 STEEL AND PIPES, INC.
Temporary Marking for Metal Surface Welding • Made of all-natural soapstone for superior marking. • Marks will not contaminate welds and are easily removed.
124
PART NO.
DESCRIPTION
250.021.008 250.021.007
CHALK FLAT SOAPSTONE CHALK HOLDER
250.019.2990 7” ALUMINUM ALLOY SQUARE • Strong, Die Cast Aluminum Construction. • Use as a Protractor, Mitre, or Framing Square. • Ideal for all Building and Remodeling Projects. • Precision Cast Markings. • Complete with Instruction M
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
WELDING CABLES/CONNECTORS WELDING CABLES High Temperature Welding Cable 600V Supreme flexibility and UL listed. Ultra high resistance to arc slag as well as flame, oil, grease, ozone and abrasion. Heavy duty jacket, coils easily for storage. For use I/A/W NEC Article 630 electric welders. Flexible lead cable; electrodeto welder unit. Uses may include battery cables and temporary and permanent power lead cables where allowed. DESCRIPTION
WELDING CABLE #4 WELDING CABLE #2 WELDING CABLE #1 WELDING CABLE #10 WELDING CABLE #20
WELDING CABLE LUGS CONNECTOR TERMINALS
Made Special For Welding Cable Use
Replaces Lugs with Quick Disconnects TECHNWELD connector terminals offer you the advantage of quickly connecting ordisconnecting welding cable at the power source. Connector terminals are usedin place of solder-type lugs and secured directly to the studs of the welder. The male half of a TECHNWELD cable connector is attached to welding cable and is inserted into the terminal. PART NO.
DESCRIPTION
219.09.00150 219.09.00153
CABLE LUG TE-1AF CABLE LUG TE-2AF
ELECTRODE HOLDER
• Made from a high copper alloy for maximum conductivity and strength. • Long top and bottom tip insulators are fibreglass to withstand intense heat and impact. • Suitable for heavy duty applications. • Oval-point screw cable connections on all models.
PART NO.
DESCRIPTION
219.09.00135 219.09.00140 219.09.00145
CABLE LUG FOR #3/0-4/0 CABLE LUG FOR #1/0-2/0 CABLE LUG FOR #6-2
PART NO.
219.09.00001 219.09.00005 219.09.00010 219.09.00015
DESCRIPTION
200AMP 250AMP 300AMP 500AMP
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
125
© 2010 STEEL AND PIPES, INC.
PART NO.
219.09.00100 219.09.00105 219.09.00110 219.09.00115 219.09.00120
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
WELDING CABLES/CONNECTORS GROUND CLAMPS Economy Ground Clamps A good ground connection is just as important in a welding circuit as the holder and the cables. A good ground clam preduces energy cost, extends cable life, helps produce consis-tent welds and allows ground location to be easily changed. - Cable connection: Bolt and Nut with Support. - Model EG-200 ground clamp is ideal for light duty welding. - Model EG-300 ground clamp is ideal for the farm welder or for light shop work. - Model EG-500 is excellent for field erection or where clamping to bar stock, piping or various shapes of metal is necessary.The pure copper braided shunt allows both high copper alloyjaws to carry welding current.
PART NO.
219.09.00030 219.09.00035 219.09.00040 219.09.00050
DESCRIPTION
200AMP 250AMP 300AMP 500AMP
GROUND CLAMPS-BRONZE Premium Ground Clamps For Tubing TECHNIWELD ground clamps have the largest contact are with the work of any clamp on the market. Serrated upper and lower jaws insure maximum bite to the work. A good ground clamp helps assure proper voltage for maximum weld results with allrods. Both upper and lower jaws of all three models are made from a high copper alloy assuming excellent current carrying ability. No steel jaws are used. A good ground connection assures better welds.
PART NO.
219.09.00032 219.09.00045
DESCRIPTION
200AMP 300AMP
LC-10 CABLE CONNECTORS Positive Lock-Tight Action Cable ConnectorThe Advanced design of LENCO cable connectors offers manyadvantages over older styles. Metal parts are precision machinedfrom heavy, specially shaped brass extrusion. Cam action designof male half connector pulls the two halves tightly together.Connector covers are molded from a special heat and coldresistant material. Covers have no metal liner to rust or corrode.Easily installed with a 1/4" allen wrench.For Cable Capacity: No. 4 thru 1/0
PART NO.
DESCRIPTION
219.09.00170 219.09.00171 219.09.00172
SET 1MBP MALE HALF ONLE-1MBP FEMALE HALF ONLY-1MBP
© 2010 STEEL AND PIPES, INC.
LC-40 CABLE CONNECTORS Positive Lock-Tight Action Cable ConnectorsThe Advanced design of LENCO cable connectors offers manyadvantages over older styles. Metal parts are precision machinedfrom heavy, specially shaped brass extrusion. Cam action designof male half connector pulls the two halves tightly together.Connector covers are molded from a special heat and coldresistant material. Covers have no metal liner to rust or corrode.Easily installed with a 1/4" allen wrench.For Cable Capacity: No. 1/0 thru 2/0
126
PART NO.
DESCRIPTION
219.09.00180 219.09.00185 219.09.00186
SET 2MBP MALE HALF ONLE-2MBP FEMALE HALF ONLY-2MBP
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PREMIUM FLEXIBLE WELDING CABLES 219.09.00128
1/0 FLEX-A-PRENE W/LC-40 MALE & FEMALE-50FT. GAUGE
#6 #4 #2 #1 #1/0 #2/0
25’
50’
75’
100’
150’
100 150 250 300 400 450
75 100 200 250 350 400
50 100 150 200 250 300
50 75 100 150 200 250
25 50 75 100 150 150
RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)
219.09.00130
1/0 FLEX-A-PRENE W/LC-40 MALE & 300 GROUND CLAMP -10FT. GAUGE
#6 #4 #2 #1 #1/0 #2/0
25’
50’
75’
100’
150’
100 150 250 300 400 450
75 100 200 250 350 400
50 100 150 200 250 300
50 75 100 150 200 250
25 50 75 100 150 150
RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)
219.09.00129
GAUGE
#6 #4 #2 #1 #1/0 #2/0
25’
50’
75’
100’
150’
100 150 250 300 400 450
75 100 200 250 350 400
50 100 150 200 250 300
50 75 100 150 200 250
25 50 75 100 150 150
RECOMMENDED AMPERAGE PER FOOT (ONE LEAD)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
127
© 2010 STEEL AND PIPES, INC.
#1 FLEX-A-PRENE W/LC-40 MALE & AF-3 ELECTRODE HOLDER-10FT.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PRESSURE REGULATORS, ARGON FLOW REGULATORS 250 SERIES PRESSURE REGULATORS 219.07.0068
• Single Stage Design PART NO. • Home and Trade use BS2501510 • Forged brass body & housing cap BS2501540 • 2” gauges • Stem type seat mechanism • Sintered inlet filter • Built-in relief valve (oxygen, insert) • Maximum inlet: 3000 psig • Fabric reinforced neoprene diaphragm • Dimensions: 6 1/2”W x 5 1/4”H x 4 1/2”D
GAS SERVICE CGA
PSIG DELIVERY
ACETYLENE 510 OXYGEN 540
2 - 15 10 - 125
350 SERIES PRESSURE REGULATORS 219.07.0067
• Single Stage Design PART NO. • Construction and Farm use BS2501510 • Forged brass body & housing cap BS2501540 • 2-1/2” gauges • Stem type seat mechanism • Sintered inlet filter • Built-in relief valve (oxygen regulators only) • Maximum inlet: 3000 psig • Fabric reinforced neoprene diaphragm • Dimensions: 7 1/2”W x 6”H x 5”D
GAS SERVICE CGA
PSIG DELIVERY
ACETYLENE 510 OXYGEN 540
2 - 15 10 - 125
ARGON FLOW REGULATORS 219.07.0215
• Piston Style Design • 25 psig medels • Machine Brass Only • 50 CFH models • Built-in relief valve (oxygen, insert) • Maximum inlet: 3000 psig • 5/8”- 18 RH(F) outlet • Teflon Seat • Argon, CO2 and Argon/Mis models PART NO.
© 2010 STEEL AND PIPES, INC.
BS1480AR BS85AR580
128
GAS SERVICE CGA
ARGON 580 ARGON 580
MAX FLOW
50 CFH 50 CFH
PSIG DELIVERY
25 25
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
BALLON FILLERS AND REGULATORS ECONOMY BALLON FILLER VALVE
219.07.0172 Model 229 - Features straight throught construction, rugged brass body. Piston type mechanism provides reliable performance.
ECONOMY BALLON FILLER WITH CONTENTS GAUGE 219.07.0171
Model 229G - Features straight throught construction, rugged brass body. Piston type mechanism provides reliable performance. 1-1/2” rear entry cylinder content gauge
CUTTING ATTACHMENTS AND HANDLES CA350 AND CA250 CUTTING ATTACHMENT • Heavy and Medium to Light duty apparatus • Capacity: CA250 cuts uo to 5” CA350 up to 6” - with proper tip • 90˚ Head • Ease on cutting oxygen valve. • For use with Acetylene, Propane, Butane, Liquid Air, Fuel Gas • Mapp®, Natural Gas (2 psig or above), Propylene, and Hydrogen.
219.07.0235
219.07.0230
PART NO.
WEIGHT LENGHT
219.07.0235 13OZ 219.07.0230 32OZ
8” 10.5”
TIPS
CUTS
SERIES 1 SERIES 3
5” 6”
USE WITH
BSWH250 BSWH350
WH350 AND WH250 WELDING HANDLES • Heavy and Medium to Light duty apparatus • 9/16” - 18 connections • Built-in Check Valves • Tubes within a tube design • Three piece Y assembly with threaded connections • Capacity: WH350 weld up to 3” WH250 to 1 1/4” with proper nozzle
219.07.0225
219.07.0220
PART NO.
219.07.0225 219.07.0220
WEIGHT LENGHT
16OZ 18OZ
8.5” 9”
USE WITH
DESCRITION
BSCA250 MEDIUM LIGHT DUTY BSCA350 HEAVY DUTY
BS1400V HAND CUTTING TORCH PART NO.
219.16.ST 1600C
LENGHT DESCRITION
21”
MEDIUM LIGHT DUTY
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
129
© 2010 STEEL AND PIPES, INC.
219.16.ST 1600C
• 9/16” - 18 connections • 90 Head • Built-in Check Valves • Cuts from 1/8“ to Cutting Tips • Uses Series 1 Cutting Tips • 21” overall lenght
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
REPLACEMENT GAUGES REPLACEMENT PRESURE GAUGES • Brass Case or Painted Steel • Lexan Crystals • Safety Blow Out Backs • Precision Movement •1/4” NPT (National Pipe Thread) • High Visibility LOW PRESSURE GAUGES HIGH PRESSURE GAUGES GAUGE SIZE
2”
4000 PSIG
GAUGE SIZE
2”
30 PSIG
219.07.0038
100 PSIG
200 PSIG
219.07.0040
219.07.0043
400 PSIG
219.07.0045
219.07.0048
CUTTING TIPS, TIP CLEANERS TIP CLEANER 219.07.0155
Stainless steel wire files for cleaning the gas orifices of cutting and welding tips. File sizes from 49 to 77, plus a tip file in an aluminium case. • Cleaner Size 6-26 • Drill Size 77-49
HARRIS STYLE-6290NX • General Cutting • 2 Pieces • Medium Preheat
VICTOR STYLE-1-101
© 2010 STEEL AND PIPES, INC.
• Hand Cutting • Medium Preheat
130
SIZES AVAILABLE
1 2 3 4 SIZES AVAILABLE
000 00 0 1 2 3 4 5
PART NUMBER
219.07.0151 219.07.0152 219.07.0153 219.07.0154 PART NUMBER
219.07.0123 219.07.0122 219.07.0125 219.07.0130 219.07.0135 219.07.0140 219.07.0145 219.07.0147
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CUTTING TIPS, WELDING TIPS, FLASH BACK ARRESTORS, TWIN WELDING HOSE VICTOR STYLE-3-101 • Hand Cutting • Medium Preheat
VICTOR STYLE-GPN • Hand Cutting • 2 Piece- Medium to Heavy Preheat
VICTOR STYLE-W Complete welding tip assembly with mixer for style 300 torches
VICTOR STYLE-MFA Complete heating tip assembly with mixer for style 300 torches
VICTOR STYLE-MFA-1 Complete heating tip assembly with mixer for style 100 torches
SIZES AVAILABLE
0 1 2 3 4 SIZES AVAILABLE
1 2 2 4 SIZES AVAILABLE
000 00 0 1 2 3 4 5 6
PART NUMBER
219.07.0126 219.07.0131 219.07.0136 219.07.0141 219.07.0146 PART NUMBER
219.07.0150 219.07.0157 219.07.0158 219.07.0159 PART NUMBER
219.07.0185 219.07.0186 219.07.0187 219.07.0188 219.07.0189 219.07.0190 219.07.0191 219.07.0192 219.07.0193
SIZES AVAILABLE
PART NUMBER
11-08 11-10 11-12 11-15
219.07.0258 219.07.0260 219.07.0262 219.07.0264
SIZES AVAILABLE
PART NUMBER
29-4 29-8
219.07.0280 219.07.0282
FLASH BACK ARRESTOR SETS
219.07.0075 • For regulators & torches
GRADE T FITTED TWIN HOSE 219.07.0015 219.07.0020 219.07.0022
DESCRIPTION
1/4” x 25’ 1/4” x 50’ 1/4” x 100’
PSI RATING
250 250 250
CONN. TYPE
B-B B-B B-B
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
131
© 2010 STEEL AND PIPES, INC.
PART NUMBER
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TORCH OUTFITS
250 SERIES MEDIUM-DUTY OUTFITS .
350 SERIES HEAVY-DUTY OUTFITS
The Blue Star 250 series outfits provide medium-duty welding and cutting performance in home and trade enviroments. • Capacity: Cut up to 5”, weld up to 1.25” with proper tips • Contents: WH250 handle CA250 cutting attachment • 250 series Oxygen and Acetylene Regulators • 0-3-101 cutting tip • #2 Welding Nozzle
The Blue Star 350 series outfits provide heavy-duty welding and cutting performance in industrial and construction enviroments. • Capacity: Cut up to 8”, weld up to 3” with proper tips • Contents: WH350 handle CA350 cutting attachment • 250 series Oxygen and Acetylene Regulators • 0-1-101 cutting tip • #2 Welding Nozzle
219.07.0102
219.07.0101
COMPLETE WELDING & CUTTING OUTFITS PART NO.
219.07.0101 219.07.0102
OUTFIT DESCRIPTION
250 MEDIUM DUTY 350 HEAVY DUTY
CUT WELD CAPACITY CAPACITY
CONTENTS INCLUDED
HOSE SIZE INCLUDED
HANDLE
UP TO 5” UP TO 1.25” 12’ X 1/4” UP TO 8” UP TO 3” 15’ X 1/4”
WH250 WH350
CYLINDER CARTS
OXY AND CUTTING ACETYLENE CUTTING WELDING ATTACHMENT REGULATORS TIP NOZZLE
CA250 CA350
250 350
0-3-101 0-1-101
#2 #2
Model 219.07.0175 Model 219.07.0180
Model 219.07.0114
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
WHEEL SIZE WHEEL TYPE BASE SIZE HEIGHT WIDTH WEIGHT SHIPPING WEIGHT SHIPPING BOX SIZE MAX LOAD
132
MODEL 219.07.0114
MODEL 219.07.0175
MODEL 219.07.0180
6” (152 MM) RUBBER 8” X 15 3/4” 41” 22” 7.80 KG. 9.50 KG. 22 1/2”X12”X5”½” 25 KG
8” (203 MM) RUBBER 12” X 21” 42” 28” 20.0 KG. 23.25 KG. 31”X15 1/2”X71/2” 110 KG
14” (355 MM) RUBBER 13” X 25” 44 1/2” 31 1/2” 24.50 KG. 28.50 KG. 34 1/2”X18 1/2”X9” 225 KG
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
219.09.00700
219.09.00706
For M.I.G. Gun Nozzle and Welding Surfaces New Quick Dry Formula, to save time and reduce cost. • Reduces spatter build-up on M.I.G. Nozzles. • Prevents spatter adhesion on surface. • Reduces clean up time. • Heat-resistant to withstand high temperature use. • Non-flammable. • Paint compatible. • Contains no silicones. • Contains no fluorocarbon. • Contains no methylene chloride. • Uses Co2 propellent. • Available in 16 and 24 oz. Aerosols.
ALUMINUM CLEANER & BRIGHTENER 219.09.00704
A ready-to-use cleaner and brightener providing rapid and effortless cleaning and removal of aluminum oxides, grease and dirt from aluminum before welding. Rinse agents provide a "sheeting" action for film-free rinsing. Some heavy accumulations may require some light brushing. Biodegradable.
HTR-30 CHEMICAL HEAT TINT REMOVER 219.09.00703
Very effective in the removal of heat tint and metal discoloration caused by temperatures within the weld zone on stainless steel, especially after TIG welding. Contains hydroflouric acid. Non-flammable.
NOZZLE GEL 219.09.00710
Economical Formula to protect both manual and automatic M.I.G. gun nozzles and M.I.G. gun tips.
SOLVENT CLEANER CRACK CHECK STANDARD 219.09.00705
NONAQUEOUS WET WHITE DEVELOPER CRACK CHECK STANDARD 219.09.00707
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
ANTI-SPATTER & NOZZLE SHIELD
PENETRANT NUCLEAR CRACK CHECK STANDARD P-HF315-1
REMEMBER...
WE HAVE A WIDE VARIETY OF ORNAMENTAL IRON DESIGNS AND ACCESSORIES FOR ALL YOUR PROJECT NEEDS: • RAILINGS • GATES • STAIRS • FENCES • DECORATIVE DESIGNS AND MORE.....
• Safe. • Non-toxic. • Contains no silicones. • Non-flammable. • Odorless. • Contains no hydrocarbon solvents. • 16 oz. Unbreakable container.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
133
© 2010 STEEL AND PIPES, INC.
WELDING LIQUID PRODUCTS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
DISCS A60S Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
METAL
SIZE ITEM NUMBER
250.003.007CC
A DIA.
B WIDTH
7
.045
C BORE
5/8
MAX RPM
PART NUMBERS
8,500
23107
A60S
SAIT EZ-CHOP® METAL
Metal studding, thin rebar, light gauge and medium metals SIZE
ITEM NUMBER
250.003.014CC
A DIA.
B WIDTH
14
3/32
C BORE
1
MAX RPM
EZ-CHOP ATTACKER
PART NUMBERS
4,400
24500
STUD KING® METAL
SAITECH STEEL WORKER®
Metal studding, thin rebar, light gauge metals
STAINLESS Stainless steel, high tensile alloys
NON-FERROUS METALS (ALUMINUM) METAL
Non-ferrous metals (aluminum, bronze, brass, etc.) A DIA.
ITEM NUMBER
250.003.012C 250.004.24053 250.004.24052
Ferrous metals (steel, iron, welds, etc.)
METAL
SIZE
12 14 14
B WIDTH
C BORE
3/32 3/32 3/32
1 1 1
MAX RPM
PART NUMBERS S.K.
6,100 4,500 4,500
SAITECH
24030
24053
ALUM.
24052
A24R - LONG LIFE METAL
Ferrous metals (iron, steel, angle iron, etc.) SIZE
250.003.010C
10
B WIDTH
1/8
C BORE
1
OVATION® DESIGN OVATION
24004
A60S
SIZE MAT’L
DIA.
ARBOR
Z
4-1/2 4-1/2 4-1/2
7/8 7/8 7/8
Premium Zirconium
GRIT
PART NO. OVATION
40 60 80
78006 78008 78009
APPLICATIONS Weld grinding and blending, Edge breaking, Deburring, Finishing and blending, Contour finishing
FIBERGLASS BACKING SAITLAM UK™ (CONICAL SHAPE - TYPE 29) © 2010 STEEL AND PIPES, INC.
6,100
250.004.78006 250.004.78008 250.004.78009
® SAFETY
134
PART NUMBERS
ITEM NUMBER
• Flap Disc Configuration • Control • Fiberglass Backing • Adhesive System
MAX RPM
ITEM NUMBER
250.003.4540 250.003.4550 250.003.4560 250.003.4580 250.003.45120 250.004.73716 250.004.73717
SIZE MAT’L
Z
A DIA.
Zirconium
ITEM NUMBER
DIA.
ARBOR
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 7 7
7/8 7/8 7/8 7/8 7/8 7/8 7/8
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GRIT
40 50 60 80 120 60 80
PART NO. SAITLAM UK.
73685 73686 73687 73688 73689 73716 73717
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
DISCS ALUMINUM OXIDE WITH GRINDING AID 3A STAINLESS Stainless steel, high tensile steel, titanium
Ferrous and/or non-ferrous metals PART NUMBER
SIZE
ITEM NUMBER
MAT’L
DIA.
250.004.74050 3A 250.004.74051 Aluminium Oxide 250.004.74052 with 250.004.74070 grinding 250.004.74071 aid 250.003.45072
WIDTH
2 2 2 3 3 3
1 1 1 1 1 1
GRIT
60 80 120 60 80 120
1/4
74050 74051 74052 74070 74071 74072
ALUMINUM OXIDE 2A Ferrous and/or non-ferrous metals (iron, steel, aluminum, copper, etc.) Wood, plastic, fiberglass, etc.
METAL WOOD
SIZE
ITEM NUMBER
MAT’L
250.004.72031 250.004.72033
ARBOR
SPINDLE
RPM
6 6
2 2
1 1
6,000 6,000
2A
Premium Aluminium Oxide
CONCRETE METAL
METAL
GRITS WGT.
PART NO.
250.004.84249 250.004.84250 250.004.84254
9 X 11 CW-C
80C 100C 220C
84249 84250 84254
SOFT
MED
5/8
-
95011
HARD
-
RPM
11,000
Non-ferrous metals Wood
WOOD
SIZE
GRADE AVAILABLE PAT NO Max
250.004.95011 *4-1/2
GRAY HAND PADS
ITEM NUMBER
ARBOR
72031 72033
Stainless steel Ferrous and/or non-ferrous metals
METAL
Varnish, plastic, fiberglass, clear coat, primer Marble, ceramics Ferrous and/or non-ferrous metals
SIZE
PART NUMBER
80 120
STAINLESS
BACKING PADS FOR RESIN FIBER DISCS ITEM NUMBER
GRITS AVAILABLE
BLACK HAND PADS
WATERPROOF SHEETS-ULTIMATE PERFORMANCE SILICON CARBIDE (CW-C) WOOD
MAX
DIA.
ITEM NUMBER
SIZE
GRADE
PART NO.
COLOR
250.004.77446 250.004.77448
6x9
Stainless Ultra Fine
77446 77448
Black Gray
SAIT-LOK-R™ BACKING PADS FOR LAMINATED, SURFACE CONDITIONING, & COTTON FIBER DISCS ITEM NUMBER
250.004.95173
SIZE
3”Medium
PART NO
95173
MAX RPM
20,000
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
135
© 2010 STEEL AND PIPES, INC.
METAL
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
DISCS MAROON-NON WOVEN STAINLESS
METAL WOOD
Stainless steel Ferrous and/or non-ferrous materials Fiberglass, gaskets
BLUE-NON WOVEN STAINLESS METAL WOOD
Stainless steel Ferrous and/or non-ferrous materials Fiberglass, gaskets
ITEM NUMBER
250.004.77314 250.004.77315
SIZE
GRADE
3”
Medium Very Fine
PART NO.
COLOR
77314 77315
Maroon Blue
VERY FINE GRADE-NON WOVEN /INTERLEAF WHEELS STAINLESS METAL WOOD ITEM NUMBER
STAINLESS
Aluminum and stainless steel Ferrous and non-ferrous materials Fiberglass
SIZE
250.004.77754 250.004.77756
BLUE-NON WOVEN/HOOK & LOOP
3 x 2 x 1/4 3 x 2 x 1/4
MAX RPM
GRIT
12,000 12,000
120 180
METAL WOOD
PART NO.
GRADE
Very Fine Very Fine
77754 77756
A46N - ALUMINUM ALUMINUM ITEM NUMBER
250.004.20062
Non-ferrous metals (aluminum, copper, brass, etc.) A DIA.
4-1/2
SIZE B WIDTH
1/4
C BORE
7/8
MAX RPM
13,300
PART NUMBERS A46N
20062
XA24Q - CONTAMINANT-FREE STAINLESS METAL
Stainless steel and other high tensile alloys Ferrous metals (iron, steel, welds, etc.)
ITEM NUMBER
A DIA.
SIZE B WIDTH
250.004.24210
4-1/2
1/4
C BORE
7/8
MAX RPM
13,300
PART NUMBERS
ITEM NUMBER
250.004.77122
Stainless steel, high tensile steel Ferrous and/or non-ferrous materials Fiberglass
SIZE
4-1/2”
GRADE
PART NO.
COLOR
Very Fine
77122
Blue
We have all the Safety Equipment that you need for your projects • Gloves • Helmets • Sunglasses • and much more . . .
24210
A24R - LONG LIFE METAL
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
250.003.004P 250.003.045P 250.003.045PA 250.003.0007P 250.003.0007PA
136
Ferrous Metals (iron, steel, welds, etc.) A DIA.
4 4-1/2 4-1/2 7 7
SIZE B WIDTH
C BORE
1/4 1/4 1/4 1/4 1/4
5/8 7/8 5/8-11 7/8 5/8-11
MAX RPM
13,500 13,300 13,300 8,500 8,500
PART NUMBERS
20013 20063 20163 20080 20086
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
KincoPro ™
UNITIZED TYPE 27 WHEELS-NON-WOVEN
Series 524-Soft Density, Medium Grade, Silicon Carbide Grain Series 732- Medium Density, Fine Grade, Silicon Carbide Grain STAINLESS METAL
Go from a coarse grind finish to a near mirror finish with the Unitized Wheel
Stainless steel, aluminum, high tensile steel Ferrous and/or non-ferrous metals
ITEM NUMBER
SIZE
SERIES
250.004.77875 4-1/2 x 7/8 250.004.77880 4-1/2 x 7/8
524 732
GRAIN DENSITY GRADE
S/C S/C
Soft Medium
MAX RPM
Medium 10,000 Fine 10,000
PART NO.
77875 77880
DEBURRING 9SF-HARD DENSITY METAL STAINLESS
NOTE: Wheels must be run in the direction of the arrow as indicated on the wheel.
Ferrous and non-ferrous materials Aluminum, stainless steel, high tensile materials
ITEM NUMBER
SIZE
SPECS. GRAIN DENSITY GRADE
250.004.77820 6 x 1 x 1
9SF
S/C
Hard
Fine
MAX RPM
PART NO.
6,000
77820
BRUSHES
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
DISCS
LARGE CUP BRUSHES Knot Wire - nut inside
250.004.03407 250.004.03409
DIA.
4 4
SIZE WIRE ARBOR
.020 .020
5/8-11 5/8-11
Crimped Wire - nut inside 250.004.09551 250.004.09553
4 5
.020 .020
5/8-11 5/8-11
ROWS
TRIM LENGTH
MAX RPM
PART NO.
1 1
1-3/8” 1-3/4”
9,000 6,600
03407** 03409***
-
1-1/8” 1-1/2”
9,000 6,600
09551 09553
** nut on outside ***nut on outside in Canada only
250.004.03414 250.004.03419 250.004.01401 250.004.01408
DIA.
SIZE WIRE ARBOR
2-3/4 2-3/4 2-3/4 2-3/4
.014 .014 .014 .014
ITEM NUMBER
250.004.03389 250.004.03391
SMALL CUP BRUSHES ITEM NUMBER
KNOT & CRIMPED WIRE WHEELS
Stringer Bead / Pipeline DIA.
SIZE WIRE ARBOR
6-1/2 .020 6-1/2 .020
5/8-11 5/8-11
MATL TYPE
SB-Stainless SB-Carbon
MAX RPM
9,000 9,000
PART NO.
03389 03391
*302 stainless steel wire used WIRE STYLE
MATL TYPE
5/8-11 Knot Carbon 5/8-11 Knot Stainless* 5/8-11 Crimped Carbon 5/8-11 Crimped Stainless*
MAX RPM
PART NO.
12,500 12,500 12,500 12,500
03414 03419 01401 01408
*302 stainless steel wire used
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
137
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
BRUSHES
SAND-LIGHT™ SURFACE CONDITIONING BACKING PADS • For use with Hook & Loop style Sand-Light™ Discs ITEM NUMBER
250.004.95159
SCRATCH BRUSHES
MAX RPM
ITEM NUMBER
SIZE ROWS
SIZE WIRE
SIZE
PART NO.
250.004.05755
3 x 19
.012
4-1/2 x 5/8-11
95159
4,800
*302 stainless steel wire used
TYPE
CURVED STAINLESS*
PART NO.
05755
The Biggest Distribution Center In The Caribbean We are your Industrial Supermarket!
Caguas
Km 27.5 Road #1, Rio Cañas, Caguas, P.R. T. (787) 747-9415 / 9416 F. (787) 747-8986 / 8987
© 2010 STEEL AND PIPES, INC.
Hato Rey
Calle Francia #467, Hato Rey, P.R. T. (787) 250-8872 F. (787) 250-8871
138
Bayamón
Ave. 29 Sector El Volcán, Bayamón, P.R. T. (787) 778-5990 F. (787) 780-7165
Las Piedras
Carr#183 Km. 20.6, Las Piedras, P.R. T. (787) 912-3000 F. (787) 912-3002
Guayama
Km. 140.4 Carr#3, Guayama, P.R. T. (787) 864-0240 F. (787) 864-2917
Quebradillas
Carr#2 Km. 97 Bo. Cocos, Quebradillas, P.R. T. (787) 291-5000 F. (787) 291-5002
Manatí
Km. 45.6 Carr#2 Bo. Alegre, Manatí, P.R. T. (787) 854-6626 F. (787) 793-4370
Ponce
Bo. Pámpano - Edificio #13 (detrás del Ponce Cash and Carry, antiguo almacén Budweiser), Ponce, P.R.
T. (787) 651-0100 F. (787) 651-0101
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Mayagüez
Km.148.4 Carr#2 El Maní, Mayagüez, P.R. T. (787) 834-0560 F. (787) 834-0590
Río Grande
Bo. Cienaga Baja Carr#3 Km.20.3, Río Grande, P.R. T. (787) 657-1188 F. (787) 657-1191
L
IN
CO
LN E LE C T
Input 1
CC DC
PHASE
50 60 Hz
RI
C
PORTABLE CUTTING POWER UP TO 3/8" The handy Pro-Cut® 25 is ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication. This professional grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy!
Output
PROCESSES
• Air Plasma Cutting • Gouging
UNIT INCLUDES
• PCT 20 Hand Torch, 15 ft. (4.5 m) • Work lead and clamp • Spare consumables • Built-in air pressure regulator with gauge • Input Cord with 115V, 15 amp plug (NEMA 5-15P) • 115V, 20 amp plug
KEY OPTIONS
• K1572-1 Spare Parts Kit for PCT-20 Torches • K2275-1 Welding Cart (80 cu ft. bottle capacity) • K520 Utility Cart (150 cu ft. bottle capacity) • K1625-1 Combination Circle Cutting Kit • K1628-1 Suction Pivot
PRO-CUT ®55
CC DC
Output
Input
1
3
PHASE
PHASE
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PRO-CUT 25 ®
50 60 Hz
IN
CO
LN E LE C T
RI
C
The Pro-Cut 55 is your top choice for industrial plasma cutting for HVAC, sheet metal and light plate fabrication metal working applications. Packed with patented features,the compact Pro-Cut generates 60 amps of cutting power capable of cutting steel up to 3/4” (19.0mm) thick. Its dual winding technology delivers easy starts, lower dross levelsand quick arc transfer rates for fast re-strikes, even on expanded metal. Long-lasting Vortech ™ technology torch consumables concentrate the arc to deliver outstanding efficiency. Patented Parts-in-Place torch design senses when nozzle parts are in the proper position to protect the operator from harm.
L
RUGGED INDUSTRIAL SYSTEM CUTS UP TO 3/4”
PROCESSES
• Air Plasma Cutting • Gouging • PCT 80 Torch • Work lead and clamp • Spare consumables • Built-in air filter and pressure regulator with gauge
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
139
© 2010 STEEL AND PIPES, INC.
BASE UNIT INCLUDES
L
PORTABLE. PROFESSIONAL, RUGGED, AFFORDABLE.
IN
CO
LN E LE C T
CC DC
Input
50 60 Hz
RI
The Invertec® V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec® V155-S is no lightweight contender. It packs the full punch of a heavyweightprofessional that you can take to the most demanding job sites. It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere.
PROCESSES • Stick • DC TIG
UNIT INCLUDES
• Invertec® V155-S (K2605-1). • Stick electrode holder, cable and Twist-Mate™ plug. • Work cable and clamp with Twist-Mate™ plug. • Fully adjustable shoulder strap. • 120/230V input cord, 6.6 ft. (2 m) with a 120V 15 Amp plug. • Extra 120V 20 Amp plug.
KEY OPTIONS
• K2275-1 Welding Cart • K852-25 Twist-Mate™ Cable Plug Kit
INVERTEC® READY PKG. V155-S
Output CC DC
IN
CO
LN E LE C T
Input
1 PHASE
RI
C
L
EASY-STORE / EASY-CARRY SUITCASE
The Invertec® V155-S offers much more than you would expect from a welder this size. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites.It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere. The Invertec® V155-S is available in two models: a base unit with stick accessories or a complete Stick/TIG ready to weld package in an Easy-Store/Easy-Carry Suitcase.
PROCESSES • Stick • TIG
UNIT INCLUDES
© 2010 STEEL AND PIPES, INC.
1 PHASE
C
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
INVERTEC V155-S
Output
®
• Invertec® V155-S • Stick electrode holder and cable with Twist-Mate® plug • Work clamp and cable with Twist-Mate® plug • Shoulder strap • 120/230V input cord with 120V 15 amp plug - 120V 20 amp plug • PTA-17V TIG torch with Ultra-Flex™ cable and Twist-Mate® adapter • PTA-17 Parts Kit • Gas Regulator • Easy-Store/Easy-Carry Suitcase
140
KEY OPTIONS
• K2275-1 Welding Cart • K852-25 Twist-Mate™ Cable Plug Kit • K1782-13 PTA-17FV Flex Head Gas Valve Torch • K1781-7 PTA-9FV Flex Head Gas Valve Torch
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
60 50 Hz
Hz
L
IN
CO
LN E LE C T
CC
Output
CC
AC DC
Input
1 PHASE
60 50 Hz
Hz
RI
C
CODE QUALITY AC/DC TIG WELDING The Invertec® V205-T AC/DC is a compact, TIG power source intended for critical AC or DC TIG welding. The V205-T AC/DC has many new features!
Output
PROCESSES • Stick • TIG
ONE-PAK® PKG. (K2350-2) INCLUDES: • K1855-4 V205-T AC/DC • 230V Input Cord & Plug • Adjustable Shoulder Strap • K870 Foot Amptrol® • K2266-1 TIG Mate™ 17 TIG Torch Starter Kit
KEY OPTIONS
• K2266-1 TIG Mate™ 17 Air-Cooled TIG Torch Starter Pack • K870 Foot Amptrol® • K963-3 Hand Amptrol® • Fume Extraction System
TIG-Mate™ 17 Air-Cooled TIG Torch Starter Kit
PRECISION TIG 225
RECOMMENDED ITEM PAGE: 166
IN
C
N E LE C OL T
AC DC
Input
1 PHASE
60 50 Hz
Hz
RI
C
GREAT FOR MOTORSPORTS AND OTHER CUSTOM FABRICATORS The Precision TIG® 225 gives you the “Power to PerformSM ”, for general fabrication, automotive /motorsports, vocational schools or serious hobby work. Micro-Start™ II Technology delivers precision arc performance to improve arc starting, welding and weld cratering.
L
®
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
INVERTEC V205-T AC/DC ®
PROCESSES • Stick • TIG
READY-PAK® PKG. (K2535-1) INCLUDES:
RECOMMENDED ITEM PAGE: 166 TIG-Mate™ 17 Air-Cooled TIG Torch Starter Kit
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
141
© 2010 STEEL AND PIPES, INC.
• Precision TIG® 225 • Removable Lift Eye • 10 ft. (3.0 m) Work Cable & Clamp • NEMA 6-50R Receptacle (208/230V models only) • TIG Procedure Guide • GTAW (TIG) Handbook KEY OPTIONS • PTA-17 One-Piece TIG Torch • K2266-1 TIG-Mate™ 17 Air-Cooled • Gas Regulator/Hose TIG Torch Starter Pack ® ® • Foot Amptrol Ready-Pak w/Cart Pkg. • K870 Foot Amptrol® (K2535-2) Includes • K963-3 Hand Amptrol® • Everything Listed Above (K2535-1) • K2348-1 Understorage Cart • Understorage Cart • Fume Extraction System
CC
AC DC
1 PHASE
L
PRECISION ARC – MAXIMUM CONTROL
For fabrication, aerospace, production, motorsports or vocational education, Precision TIG® models deliver serious code-level quality. • PATENTED MICRO-START™ II TECHNOLOGY delivers extremely stable low amperage starting, welding and cratering for AC and DC welding. • AC AUTO-BALANCE® automatically sets the optimal cleaning vs. penetration levels for great looking aluminum welds. • WIDEST OUTPUT RANGE in class – 3-340 amps for 275 model and 2-420 amps for 375 model. • HIGHEST DUTY CYCLE – 275 @ 40% for 275 model and 375 amps @ 40% for 375 model. • FREE! BUILT-IN TIG PULSER helps control heat input in the weld to reduce distortion and burn through on thin materials. Optional on 275 model. • NEAT/ORGANIZED CABLE MANAGEMENT with integrated torch holster. • BUILT-IN STORAGE COMPARTMENT with removable tray for torch consumables. • FAN-AS-NEEDED™ (F.A.N.™) prevents overheating. F.A.N.™ reduces power consumption, noise, motor wear and dust in the machine
PROCESSES • Stick • TIG
KEY OPTIONS
PRECISION TIG® 275 WATER-COOLED READY-PAK® W/CART INCLUDES • K2619-1 Precision TIG® 275 • Under-Cooler Cart • Foot Amptrol® • Gas Regulator/Flowmeter/Hose • PTW-20 Pro-Torch™ TIG Torch • Zippered Torch Cover • Parts Kit • Water Hose (2 included) • 15 ft. (4.5 m) 2/0 Work Cable/Clamp • PTA-9 or -17 Torch Adapter
142
IN
CO
50 60
60 Hz
LN E LE C T
Hz
RI
• K2621-1 Advanced Control Panel (275 model only) • K963-3 Hand Amptrol® • K704 Stick Welding Accessory Kit
PRECISION TIG®
© 2010 STEEL AND PIPES, INC.
Input
C
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PRECISION TIG 275 & 375
Output
™
PRECISION TIG® 375 WATER-COOLED READY-PAK® W/CART INCLUDES
• K2622-1 Precision TIG ® 375 • Under-Cooler Cart • Foot Amptrol® • Gas Regulator/Flowmeter/Hose • PTW-20 Pro-Torch™ TIG Torch • Zippered Torch Cover • Parts Kit • Water Hose (2 included) • 15 ft., (4.5 m) 2/0 Work Cable/Clamp • PTA-9 or -17 Torch Adapter
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
L
Input
1 PHASE
60 50 Hz
Hz
1
60
RI
C
AC GENERAL PURPOSE WELDING Use our popular AC-225 to stick weld mild steel, low alloy and stainless steels as well as cast iron for common repair and hobby projects.
IN
LN E LE C T
PROCESSES • Stick
UNIT INCLUDES
• Insulated electrode holder and cable • Lightweight helmet with lenses • Heavy duty work clamp and cable • Sample pack of electrodes • Helpful Welder’s Guide • Input Cable with integrated plug
KEY OPTIONS
RECOMMENDED ITEM PAGE: 166 K761 Wheel Kit
• K761 Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes.
AC/DC 225/125
Output
L
IN
CO
LN E LE C T
AC DC
Input
PHASE
Hz
RI
C
TACKLE MORE TASKS WITH AC/DC
CC
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
AC-225
Output CC AC CO
Select DC polarity for extremely stable arc action or out-of-position welding with Lincoln Fleetweld® 5P+. Choose AC polarity for welding on heavier plate, greater deposition or faster travel speeds with Lincoln® Fleetweld® 35. Great choice for stick welding on mild steel, low alloy and stainless steels as well as cast iron and hardfacing for maintenance, repair and light fabrication projects.
PROCESSES • Stick • TIG
UNIT INCLUDES
• Insulated electrode holder and cable • Heavy duty work clamp and cable • Helpful Welder’s Guide • Input Cable with integrated plug and receptacle
K761 Wheel Kit
• K761 Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
143
© 2010 STEEL AND PIPES, INC.
KEY OPTIONS
RECOMMENDED ITEM PAGE: 166
L
CO
LN E LE C T
Output
RI
CC
Input
1 PHASE
60 Hz
PROCESSES • Stick • TIG • Gouging
RECOMMENDED ITEM PAGE: 125
KEY OPTIONS
Steel & Pipes Welding Cable
• K704 Accessory Kit, 400 Amp • K930-2 TIG Module • K866-Undercarriage
#1 Flex-a-prene W/lc-40 Male & Af-3 Electrode Holder-10ft. 219.09.00129 Requires adapter Cable Lug TE-2AF 219.09.00153
IDEALARC®DC-400
CC
Output CV
L
INDUSTRIAL DC MULTI-PROCESS WELDERS
IN
C
N E LE C OL T
RI
Rugged construction, simple controls and rated 100% duty cycle output make these machines a sound investment for heavy duty shop applications.
PROCESSES
• Stick • TIG • MIG • Flux-Cored • Submerged Arc • Gouging
KEY OPTIONS DC-400
• K804-1 Multi-Process Switch • K841 Undercarriage DC-600 • K804-1 Multi-Process Switch • K1611-1 Paralleling Kit (for codes above 10500) • K842 Undercarriage DC-655 • K1482-1 Digital Meter Kit • K1528-1 Dual Process Switch • K1611-1 Paralleling Kit • K842 Undercarriage © 2010 STEEL AND PIPES, INC.
AC DC
BASIC INDUSTRIAL STICK WELDING The Idealarc® 250 delivers up to 300 amps AC (250 amps DC) for stick welding in vocational education, industrial production, maintenance and repair or farm shop environments.
C
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
IN
C
IDEALARC 250 ®
144
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
DC
Input
1 3 50 60 PHASE
Hz
L
CO
LN E LE C T
Output CV
RI
DC
Input
1 3 50 60 Hz
PHASE
C
INVERTEC V350-PRO
IN
DESIGNED SMART. BUILT TOUGH. The Invertec® V350-PRO is one of Lincoln's best multi-process welders. Dependent on version, it's capable of Stick, DC TIG, MIG, Pulsed MIG, Flux-Cored and Arc Gouging, making it the most versatile multi-process inverter welder in its class. Aluminum welders especially love the Advanced Process Model for its pulsed MIG welding capabilities, and the V350-PRO Inverter Rack is very popular for multi-operator jobs that require IP23S rating for outdoor use.
PROCESSES
• Stick • TIG • MIG • Pulsed (Advanced Process Panel only) • Flux-Cored • Gouging RECOMMENDED ITEMS PAGE: 125
READY-PAK® PACKAGE (K2437-2) INCLUDES
Steel & Pipes Welding Cable
• V350-PRO Factory Model (K1728-6) • LF-72 Heavy Duty Wire Feeder (K2327-6) •Work & Wire Feeder 2/0 Welding Cable Package, 10 ft. (3.0 m) • Harris® Flowmeter/Regulator w/Adapter and Hose, 10 ft. (3.0 m) • Inverter and Wire Feeder Cart
L
IN
CO
LN E LE C T
RI
www.lincolnelectric.com/green
Output
Input
15-110 24-42 VAC VDC
C
LN-25 PRO
#1 Flex-a-prene W/lc-40 Male & Af-3 Electrode Holder-10ft. 219.09.00129
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CC
®
PORTABLE INDUSTRIAL WIRE FEEDER The LN-25 PRO is designed to be simple, reliable and easy to service. The LN-25 PRO is ideal for field construction and fabrication, shipyards, and rental companies.
PROCESSES • MIG • Pulsed • Flux-Cored
• Internal Contactor • Gas Solenoid • Flowmeter • Arc Sensing Lead & Clip, 15 ft. (4.5m) • 2 Gun Bushings (K1500-2 installed; K1500-1 loose)
RECOMMENDED ITEMS PAGE: 167, 196 Magnum® 300 Gun need connector kit K466-10
Magnum® 400 Gun need connector kit K466-10 Innershield® Gun
Magnum 300
Magnum 400
K126-1 - 10ft. K126-2 - 15ft.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
145
© 2010 STEEL AND PIPES, INC.
LN-25 PRO INCLUDES
L
CO
LN E LE C T
Output
RI
CV DC
Input
PROCESSES
50 60 Hz
®
• MIG • Flux-Cored
UNIT INCLUDES
TM
• Magnum® 250L Gun • Work Clamp and Cable, 10 ft. (3.0 m) • 230V Input Power Cable w/Plug (208/230V model only) KEY OPTIONS • Drive Rolls & Guide for Steel • K466-6 Magnum® Connection Kit • Adjustable Gas Regulator & Hose • K2703-1 POWER MIG® Spool Gun Adapter* • K468 Spindle Adapter for 8 in. O.D. Spools • K1702-1 Dual Cylinder Mounting Kit • K2378-1 Canvas Cover • K2532-1 Magnum® 100SG Spool Gun • K487-25 Magnum® SG Spool Gun • K2490-1 Magnum® 250LX Spool Gun
RECOMMENDED ITEMS PAGE: 168
IN
CO
Spool Gun Ready
Spool Gun Capable
Spool Gun Capable
Magnum 100SG Medium Duty
Magnum SG
Magnum 250LX
MediumDuty
LN E LE C T
Output
CV DC
RI
C
POWER MIG® 255XT
THE PROFESSIONAL’S CHOICE! FOR JOB SHOP FABRICATION The POWER MIG® 255XT sets the standard for MIG and flux-cored welding in industrial production, job shop fabrication, maintenance or repair work. ®
PROCESSES • MIG • Flux-Cored
ONE-PAK® SPOOL GUN PKG. INCLUDES • POWER MIG® 255XT (K2701-1) • Magnum® 250XL Spool Gun • Spool Gun Holder • Dual Cylinder Mounting Kit • Adjustable Gas Regulator & Hose Kit
© 2010 STEEL AND PIPES, INC.
1 PHASE
POWER MIG® THE PROFESSIONAL’S CHOICE! The POWER MIG® 216 offers the autobody and sheet metal fabrication industries top welding performance with a host of professional features.
L
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
IN
C
POWER MIG 216 ®
146
UNIT INCLUDES
• Magnum® 250L Gun •Work Clamp and Cable, 10 ft. (3.0 m) • 230V Input Power Cable w/Plug (208/230V model only) • Drive Rolls & Guide for Steel • Adjustable Gas Regulator & Hose
KEY OPTIONS
• K1702-1 Dual Cylinder Kit • K2378-1 Medium Canvas Cover • K2490-1 Magnum® 250LX™ Spool Gun • K487-25 Magnum® SG Spool Gun • K2445-1 POWER MIG® SG Spool Gun Control Cable Adapter
RECOMMENDED ITEMS PAGE: 168 Spool Gun Ready
Spool Gun Capable
Magnum 250LX Heavy Duty
Medium Duty
Magnum SG
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Heavy Duty
Input
1 PHASE
60 Hz
L
CO
LN E LE C T
Output CV
RI
DC
Input
1 PHASE
50 60 Hz
C
POWER MIG 350MP
IN
THE PROFESSIONAL’S CHOICE! When you want more than just a MIG machine, the POWER MIG® 350MP is the choice for you. Lincoln’s Chopper Technology® delivers more welding processes: Stick, TIG, MIG, Flux-cored, and Advanced Processes such as Power Mode® and Pulse-On-Pulse®.
PROCESSES • Stick • Pulsed • TIG • Flux-Cored • MIG
UNIT INCLUDES
• POWER MIG® 350MP (K2403-1) • Panther™ Push-Pull Gun, 25 ft. (7.6 m) • 3/64 in. Aluminum Drive Roll Kit • Magnum® 300 Gun, 15 ft. (4.5m) • Cable Liner • Contact Tips •Work Clamp and Cable • Adjustable Gas Regulator & Hose
• POWER MIG® 350MP • Magnum® 300 Gun • Work Clamp and Cable • 230V Input Power Cable w/Plug (208/230V model only) • Drive Rolls & Guide for Steel • Adjustable Gas Regulator & Hose
RECOMMENDED ITEM PAGE: 168
KEY OPTIONS
Spool Gun Ready
• K1702-1 Dual Cylinder Kit • K2378-1 Medium Canvas Cover • K2874-2 Panther™ Push-Pull Gun, 25 ft. (7.6 m) • K2490-1 Magnum® 250LX Spool Gun
Magnum 250LX
Heavy Duty
IN
CO
LN E LE C T
RI
C
SP-140T & SP-180T
L
PUSH-PULL ONE-PAK® INCLUDES
Chopper Technology®
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CC
®
Output
CV DC
Input
1 PHASE
60 Hz
SELECT 120 OR 208/230 VOLT AC INPUT COMPACT WIRE WELDERS Choose these great little welders for project or repair welding in your garage, barn or shop using MIG or self-shielded flux-cored wire welding.
PROCESSES • MIG • Flux-Cored
UNIT INCLUDES
• 2 lb. (0.90 kg) Spool of SuperArc® L-56® MIG wire • 1 lb. (0.45 kg) Spool NR®-211-MP • Work Clamp & 10 ft. (3.0 m) Cable • Handshield • Learn-To-Use DVD
RECOMMENDED ITEM PAGE: 168 Spool Gun Ready
KEY OPTIONS
• K2532-1 Magnum® 100SG Spool Gun
Shown: 219.11.K2688-1 SP-140T
Shown: 219.11.K2689-1 SP-180T
Magnum 100SG
Medium Duty
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
147
© 2010 STEEL AND PIPES, INC.
• Magnum® 100L gun 10 ft. (3.0 m) • .025" (0.6 mm) Contact Tips (Qty. 3) • .035" (0.9 mm) Contact Tips (Qty. 3) • Gasless Nozzle for Innershield® • Gas Nozzle for MIG • Spindle Adapter, 8" (203 mm) Dia. Spools • .025"-.030" (0.6-0.7 mm) MIG Drive Roll • .035" (0.9 mm) MIG Drive Roll • .030".-.045" (0.7-1.1 mm) Knurled Drive Roll • Adjustable Gas Regulator & Hose
L
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CO
LN E LE C T
RI
Output
C
BULLDOG™ 140
IN
5.5s
(1)
(2)
kW
Input G
IT’S GREAT FOR HOMEOWNERS AND ANYONE WHO NEEDS PORTABLE AC STICK WELDING AND AC GENERATOR POWER! It’s great for homeowners and anyone who needs portable AC stick welding and AC generator power! Portable AC Welder / AC Generator
PROCESSES • Stick
KEY OPTIONS
• K875 Accessory Kit • K2722-1 Undercarriage • K2819-1 Lift Bail Kit • K2804-1 Canvas Cover • K2471-1 POWER MIG® 140C • K2473-1 POWER MIG® 180C • K2532-1 Magnum® 100SG SpoolGun* *(Requires POWER MIG® 140C or 180C) Spool Gun Ready
Magnum 100SG
Medium Duty
RECOMMENDED ITEM PAGE: 168
OUTBACK®/BULLDOG™ CANVAS COVER To protect your machine when not in use. Made from attractive red canvas material that is flame retardant, mildew resistant and water repellent.
L
IN
CO
LN E LE C T
Output
CC DC 4.7
RI
C
OUTBACK 145 & 185 ®
BUILT FOR THE OUTDOORS! Outback® models are great for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone who needs portable DC stick welding and AC generator power!
PROCESSES • Stick
KEY OPTIONS
© 2010 STEEL AND PIPES, INC.
CC AC
• K875 Accessory Kit • K2793-1 Spark Arrestor Kit (Outback® 185 only) • K2722-1 Undercarriage • K2819-1 Lift Bail Kit • K2804-1 Canvas Cover • K1690-1 GFCI Receptacle Kit (2 Kits Required) • K2471-1 POWER MIG® 140C Spool Gun Ready • K2473-1 POWER MIG® 180C • K2532-1 Magnum® 100SG Spool Gun* *(Requires POWER MIG® 140C or 180C) Magnum 100SG
MediumDuty
148
RECOMMENDED ITEM PAGE:168
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
P
kW
5.7P kW
Input
G
L
IN
CO
LN E LE C T
AC DC
11
Input G
P
kW
RI
C
XTRA PERFORMANCE! XTRA POWER! XTRA PROTECTION!
Output CV
The Ranger® 250 GXT has all of the Xtras you need for construction and maintenance work—250 amps for AC or DC stick and wire welding, 11,000 watts peak AC generator power and Lincoln’s® enclosed case.
PROCESSES • Stick • TIG • MIG • Flux-Cored • Gouging
KEY OPTIONS
• K886-2 Canvas Cover • K930-2 TIG Module • K1737-1 All-Terrain Undercarriage • K704 Accessory Kit, 400 Amp • K857-1 Remote Output Control, 100 ft. (30 m)
L
IN
CO
LN E LE C T
RI
C
RANGER ® 305 D
CC Output CV DC
10
P
kW
Input D
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
RANGER 250 GXT
CC
®
300 AMP DC DIESEL ENGINE-DRIVEN WELDER
For contractors with a diesel fleet, here’s a powerful stick, TIG, wire and pipe welding diesel engine-driven welder. Rugged and dependable, the Ranger® 305 D is built with a totally enclosed case for maximum protection. The 12 gallon (45 L) fuel tank will last the entire day. Lincoln’s® Ranger® 305 D . . . ®
PROCESSES • Stick • TIG • MIG • Flux-Cored • Gouging
ONE-PAK® PACKAGE INCLUDES KEY OPTIONS
• K2635-1 Small 2-Wheel Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • K704 Accessory Kit, 400 Amp • K857-1 Remote Output Control, 100 ft. (30 m)
Chopper Technology THE LINCOLN ELECTRIC GREEN INITIATIVE
Complies to EPA Tier 4i Emissions Standard.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
149
© 2010 STEEL AND PIPES, INC.
• K1727-3 Ranger® 305D • K704 Accessory Kit, 400 Amp • K2613-1 LN™-25 PRO Wire Feeder • K126-2 Gun and Cable • KP1697-068 Drive Roll Kit • .072" NR®-232, 25 lb. Spool
L
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
IN
CO
LN E LE C T
RI
C
VANTAGE 300 & 400 ®
Output
CC CV
DC
12.5P kW
19
P
kW
(2)
Input
D
COMPACT, MULTI-PROCESS, EXCELLENT VALUE
Quiet, compact Vantage® 300 & 400 models are an ideal choice for construction teams, pipe rig owners and rental fleet managers. Select your choice of proven 4 cylinder 1800 RPM diesel engines. • COMPACT CASE with stainless steel enclosure. • LINCOLN’S® CHOPPER TECHNOLOGY® delivers great arc starts and a smooth arc for stick, TIG or wire welding. • MULTI-PROCESS WELDING -Five process modes including: • CC-Stick (3/16 in./4.8 mm with Vantage® 300, 1/4 in. /6.4 mm with Vantage® 400) • Downhill Pipe (for stick) • Touch-Start TIG® DC • CV-Wire (5/64 in./2.0 mm with Vantage® 300, 3/32 in./2.4 mm with Vantage® 400) • Arc Gouging – Carbon sizes up to 1/4 in. (6.4 mm) with Vantage® 300 and 5/16 in. (7.9 mm) with the Vantage®400 • PLENTY OF AC GENERATOR POWER
Chopper Technology®
Vantage® 300 – 12.5 kW peak (11 kW continuous) 3-phase 240V AC – 11.5 kW peak (10 kW continuous) 1-phase 120/240 AC
Vantage® 400 – 19 kW peak (17 kW continuous) 3-phase 240V AC – 12 kW peak (11 kW continuous) 1-phase 120/240V AC • LOW NOISE – As low as 99.1 dBA Lwa sound power (74.8 dB at 23 ft./7m) with Vantage® 400
THE LINCOLNELECTRIC GREEN INITIATIVE
Compliesto EPA Tier 4i EmissionsStandard.
KEY OPTIONS
• K2636-1 Medium Two-Wheel Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • K2627-2 Remote Output Control w/120V AC, 100 ft., 20A capacity
VANTAGE® VANTAGE® 300 READY-PAK® PACKAGE INCLUDES
• Vantage® 300 • Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • Fender and Light Kit • Cable Rack • Cable Connectors (qty. 2) • Electrode Cable 2/0, two 50 ft. (15.3 m) lengths • Electrode Cable 2/0, 10 ft. (3 m) •Work Cable 2/0, 50 ft. (15.3 m) • 300A Electrode Holder • 300A Work Clamp © 2010 STEEL AND PIPES, INC.
(1)
150
VANTAGE® 400 READY-PAK® PACKAGE INCLUDES
• Vantage® 400 • Road Trailer with Duo-Hitch™: Ball/Eye Hitch Combo • Fender and Light Kit • Cable Rack • Cable Connectors (qty. 2) • Electrode Cable 3/0, two 50 ft. (15.3 m) lengths • Electrode Cable 3/0, 10 ft. (3 m) •Work Cable 3/0, 50 ft. (15.3 m) • 400A Electrode Holder • 500A Work Clamp
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWERCUT® 650 CUTTING PACKAGE • Manually cuts 5/8 in. (15.9 mm) and severs 3/4 in. (19.0 mm)—powerful cutting performance • Economically priced—tremendous cutting value for the money • Compact portable design—goes to the job, easily moved about • Delivers big machine cutting power in a rugged, lightweight package • Arrives ready to cut, with torch connected and front-end parts in place, for the ultimate in operator convenience • Trigger lock-in for long-cut operator comfort • Adjustable output—tailor the current to the material being cut • Compact simple torch—easy access, little maintenance • New, durable torch cable prevents snagging on fixtures and materials • Patented XT nozzles—extended shape gives good visibility as well as good consumable life • Drag or standoff cutting—easy operation with little or no training • Template following feature—easily duplicates curves or straight lines • Tolerates poor power lines • Three-year warranty on console • One-year warranty on torch • Optional Five-year warranty
The PowerCut® 650 comes out of the box ready to go! The torch is attached with parts in place, primary cord is attached and the filter/regulator is installed. Just hook up the air, plug it in and cut.
TORCH • Uses PT-31XLPC
PT-31XLPC
PAGE: 186
SPECIFICATIONS PT-31XLPC
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
151
© 2010 STEEL AND PIPES, INC.
Cuts 5/8 in. (15.9 mm); severs 3/4 in. (19.0 mm) Output: 40% duty cycle ........................................ 40A/120V 60% duty cycle ........................................ 30A/120V 100% duty cycle ...................................... 22A/120V Output Current Range .............................................10 to 40 Amperes Open Circuit Voltage ............................................... 290 Vdc Nominal Input @ 40A/120V ..... 208/230 VAC, 1 ph. 50/60 Hz., 35/32 amps Input @ 40A/120V ....... 230 VAC, 1 Phase, 50/60 Hz, 35/32 Amps Input @ 40A/120V ............ 400 VAC, 3 Phase, 50/60 Hz, 9/6 Amps Input @ 40A/120V ............ 460 VAC, 3 Phase, 50/60 Hz, 8/5 Amps Power factor @ 40A Output ................................................. 76% (1 Phase) Efficiency @ 40A Output ...................................................... 85% (Typical) Air requirements ............................................................. 250 cfh at 80 psig Dimensions: Length ...............................................19.00” (483mm) w/ handles .................................. 25.70” (653mm) Height .............................................. 16.50” (419mm) Width ................................................ 12.50” (318mm) w/ Opt. torch wrap ........................15.50” (394mm) Weight (less torch & work cable) .......................................... 53 lbs. (24 kg)
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION © 2010 STEEL AND PIPES, INC.
POWERCUT® 900 PLASMARC® CUTTING PACKAGE The PowerCut plasma cutting package will take whatever you throw at it, and ask for more. Designed with ESAB Plasmarc technology, PowerCut machines are more powerful and durable than any other machine in their class. They also make plasma cutting easier and more economical - delivering reliability, high production, and a wide variety of performance features. With design features that simplify operations, reduce set-up time and enhance consumable life, PowerCut packages let you spend less time troubleshooting and more time cutting. And with the addition of the PowerCut 900 to the family, the most rugged machines in the industry are more versatile and accessible than ever. • Rugged design – PowerCut’s external housing design is durable, damage-resistant, corrosion-resistant and weather resistant, while remaining lightweight for portability. • Tool-less quick disconnect torch – Disconnects from the machine without the use of wrenches or special tools. Now you can easily disconnect your PT-38 torch for storage, repairs or replacement, or to attach a PT-37 mechanized torch for mechanized applications. • Digital readout display – Easy to read and shows the exact pressure or amperage, so you can operate with confidence. The display also shows help codes to assist in troubleshooting minor errors, reducing downtime. • Blowback technology – Eliminates high-frequency startups that can disrupt CNC controls and nearby computer systems. • Auto-modes (gouge, grate and normal modes) Switch between modes automatically, tailoring your application without manually changing settings on the console. • Suspended electronics – Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration. • Sealed switches – Silicone-sealed switches are immune to corrosion, as well as dust and dirt infiltration. • Gouging capability – PowerCut delivers the extra output voltage needed for superior plasma gouging capability. • Automatic fan control – The cooling fan is automatically controlled to run only when necessary, to conserve energy and reduce ingested dust and dirt. • Built-in power line conditioner – Protects against damage from power line noise and spikes, even with poor-quality power. • Torch wrap and spare parts kit holder – Now standard on all packages, the holder lets you neatly fold up excess torch cables for convenient storage in your consumable box.
• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch
SPECIFICATIONS
Cuts .......................................................................... 7/8 in. (22 mm) Severs ....................................................................1-1/4 in. (32mm) Output: 60% duty cycle .................................................... 60 A Output: 100% duty cycle ................................................... 50A Input phase 1 ................................... 208/230vac, 50/60Hz., 56/47A Input phase 3 ................................... 208/230vac, 50/60Hz., 28/23A Input phase 3 ................................................. 575vac, 50/60Hz., 9A Input phase 3 ............................................... 400vac, 50/60Hz., 13A Input phase 3 ............................................... 460vac, 50/60Hz., 12A Air Requirements: ........ 400cfh @ 80psig (165l/min. @ 4.8-5.2bars) Dimensions: Length .............................................. 25.3 in. (643mm) Height ...............................................14.2 in. (361mm) Width.................................................12.3 in. (312mm) Weight ................................................. 71 lbs. (32 kg)
TORCH • Uses Pt-38 Hand Torch PAGE: 189
PT-38 HAND TORCH PT-38 Hand Torch
• Plug-n-play mechanized option – Lets you easily transform your manual cutting system into a powerful mechanized system for your gantry machine.
152
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWERCUT® 1300 PLASMARC™ CUTTING PACKAGE PowerCut® 1300 makes plasma cutting easier and more economical than ever before, delivering reliability, high production and a wide variety of performance features. With design features that simplify operation, reduce set-up time and enhance consumable life, it lets you spend less time troubleshooting and more time cutting. • Rugged design - Durable external housing design is damage-resistant, corrosion-resistant and weather-resistant, while remaining lightweight for portability • Input voltage selector switch - conveniently located on back of the machine, lets you easily change input voltage from 208 to 460 • Tool-less Quick Disconnect torch disconnects from machine for storage, repairs, or replacement without the use of wrenches or special tools, or to attach a PT-37 mechanized torch
• Switch between gouge, grate and normal modes automatically, tailoring your application without manually changing settings on console • Delivers the extra output voltage needed for superior plasma gouging capability • Torch wrap and spare parts kit holder is standard on all packages • Blowback technology eliminates high-frequency startups that can disrupt CNC controls and nearby computer systems • Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration • Silicone-sealed switches are immune to corrosion and dust and dirt infiltration • Automatic fan control allows cooling fan to run only when necessary – conserves energy and reduces ingested dust and dirt • Built-in power line conditioner protects against damage from power line noise and spikes, even with poor-quality power
• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch
SPECIFICATIONS Cuts 1-1/4 in. (32 mm); severs 1-1/2 in. (38 mm) Output: 60% duty cycle ........................................... 70A (1 ph) 100% duty cycle ......................................... 70A (3 ph) Input 1 phase ................................... 208/230 VAC, 50/60 Hz., 70/60 A Input 3 phase .................................. 208/230 VAC, 50/60 Hz, 36/31 A Input 3 phase ................................... 230/460 VAC, 50/60 Hz, 31/20 A Input 3 phase ............................................... 400 VAC, 50/60 Hz, 18 A Input 3 phase ............................................... 575 VAC, 50/60 Hz, 14 A Air requirements ....... 400 cfh at 80 psig (165 I/min. @ 4.8-5.2 bars) Dimensions: Length ............................................ 27.80” (706 mm) Height .............................................. 14.90” (378 mm) Width ................................................ 12.70” (323 mm) Weight .......................................................................... 90 lbs. (41 kg)
TORCH • Uses Pt-38 Hand Torch PAGE: 189
PT-38 HAND TORCH PT-38 Hand Torch
• Plug N Play mechanized option lets you easily transform your manual cutting system into a powerful mechanized system for your gantry machine
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
153
© 2010 STEEL AND PIPES, INC.
• Digital readout display is easy to read and shows exact pressures or amperage. Display also shows help codes to assist in troubleshooting
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWERCUT® 1600 PLASMARC™ CUTTING PACKAGE PowerCut® 1600 makes plasma cutting easier and more economical than ever before, delivering reliability, high production and a wide variety of performance features. With design features that simplify operation, reduce set-up time and enhance consumable life, it lets you spend less time troubleshooting and more time cutting.
• Rugged design - Durable external housing de-
sign is damage-resistant, corrosion-resistant and weather-resistant, while remaining lightweight for portability
• Input voltage selector switch - conveniently located on back of the machine, lets you easily change input voltage from 208 to 460
• Tool-less Quick Disconnect torch disconnects
from machine for storage, repairs, or replacement without the use of wrenches or special tools, or to attach a PT-37 mechanized torch
• Digital readout display is easy to read and shows
exact pressures or amperage. Display also shows help codes to assist in troubleshooting
• Switch between gouge, grate and normal modes automatically, tailoring your application without manually changing settings on console
• Delivers the extra output voltage needed for superior plasma gouging capability
• Torch wrap and spare parts kit holder is standard on all packages
• Blowback technology eliminates high-frequency
startups that can disrupt CNC controls and nearby computer systems
• Sensitive internal electronics are suspended from the aluminum frame, insulating them from shock and vibration
• Silicone-sealed switches are immune to corrosion and dust and dirt infiltration
• Automatic fan control allows cooling fan to run only when necessary – conserves energy and reduces ingested dust and dirt
• Built-in power line conditioner protects against
© 2010 STEEL AND PIPES, INC.
damage from power line noise and spikes, even with poor-quality power
• Three-year warranty on console • Optional five-year warranty on console • One-year warranty on torch
SPECIFICATIONS Cuts 1-1/2 in. (38 mm); severs 1-3/4 in. (44 mm) Output: 40% duty cycle .......................................90A (1 ph) 60% duty cycle .......................................90A (3 ph) Input 1 phase ..........................................230 VAC, 50/60 Hz., 78 A Input 3 phase ...............................208/230 VAC, 50/60 Hz, 47/41 A Input 3 phase ...............................230/460 VAC, 50/60 Hz, 41/25 A Input 3 phase ...........................................400 VAC, 50/60 Hz, 26 A Input 3 phase ...........................................575 VAC, 50/60 Hz, 11 A Air requirements ......400 cfh at 80 psig (165 I/min. @ 4.8-5.2 bars) Dimensions: Length ..........................................27.80” (706 mm) Height ...........................................14.90” (378 mm) Width ............................................12.70” (323 mm) Weight ........................................................................90 lbs. (41 kg)
TORCH • Uses Pt-38 Hand Torch PAGE:189
PT-38 HAND TORCH PT-38 Hand Torch
• Plug N Play mechanized option lets you easily
transform your manual cutting system into a powerful mechanized system for your gantry machine
154
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
AC DC
1
Input
PHASE
PORTABLE SOLUTIONS FOR PROFESSIONAL TIG & STICK WELDING • Unparalleled performance in a mobile machine for a wide range of TIG and Stick welding applications • Designed for quality TIG welding with all types of metals • Extremely easy to use – all welding parameters displayed in an easy-to-understand format • Innovative QWave™ feature – enables AC welding with exceptional arc stability and low noise • AC frequency and balance control (available with TA34 AC/DC) – optimizes weld pool • Electrode preheating (available with TA34 AC/DC) – facilitates excellent starts and extends electrode life • ESAB 2-Program function – allows pre-programming and program changes during welding • DC Pulsed TIG welding (available with TA34 AC/DC) – for easy control of heat input and weld pool • DC Micro Pulse (available with TA34 AC/DC) – minimizes area affected by heat, particularly when working with thin metals • Hot start, Arc force and polarity switch (DC) – create true MMA (Stick) characteristics in AC and DC mode • Equipped with large OKC 50 cable connectors – for greater durability • Features compact design with impact resistant polymer and aluminum casing – makes the unit lightweight and easy to carry • Small size does not compromise vital cooling of internal components • Large heat sinks and innovative design make these Caddy™ machines run cooler – promotes longer machine life even when used in harsh environments • Designed to keep sensitive interior parts clean and dust free • Built in accordance with IP23 for outdoor use, even in wet-weather conditions – makes this machine ideal for on-site work • Equipped with a PFC (Power Factor Correction) circuit – allows the machine to perform a full range of functions on a 16 A fuse, protects against fluctuating mains voltage, and makes it safer to use with a generator
OPTIONS
CoolMini cooling unit ..................................................0460144880 2-wheel Trolley, small gas bottle..................................0459366885 2-wheel Trolley, gas bottle in front ..............................0459366886 2-wheel Trolley, gas bottle on side ..............................0460330880 Remote control AT 1 CAN.............................................0459491883 Remote control AT1 CoarseFine CAN...........................0459491884 Remote control MTA1 CAN ..........................................0459491880 Remote control T1 Foot CAN........................................0460315880 Remote interconnection cables: 16.5 ft. (5m) CAN..........................................................0459554880 33 ft. (10m) CAN...........................................................0459554881 49 ft. (15m) CAN ..........................................................0459554882 82 ft. (25m) CAN ......................................................... 0459554883
TIG TORCHES
TXH™ 250w 13 ft. (4m).............................................. 0460013840 TXH™ 250wF 13 ft. (4m).............................................. 0460013841 TXH™ 200 13 ft. (4m)...................................................0460012840 TXH™ 200 F 13 ft. (4m)................................................0460012842 TXH™ 250wr 13 ft. (4m).............................................. 0462013840 TXH™ 250wrFr 13 ft. (4m)........................................... 0462013841 TXH™ 200r 13 ft. (4m)................................................. 0462012840 TXH™ 200 Fr 13 ft. (4m)...............................................0462012842 Accy Kit for TXH 200.............................................................999126 Accy Kit for TXH 250w..........................................................999127 Remote adapter kit, includes holder for remote models................................0459491912
SPECIFICATIONS Mains voltage V/ph Hz Fuse (slow), A Maximum Output 20% duty cycle, TIG, A/V 60% duty cycle, TIG, A/V 100% duty cycle TIG, A/V Setting range TIG AC/DC Setting range MMA Open circuit voltage, V DC Power factor at 100%, TIG mode Efficiency at 100%, TIG mode Enclosure class IP 23 Dimensions LxWxH Weight CoolMini water cooling unit: Cooling capacity, W Coolant volume Maximum flow Maximum pressure, 50/60 Hz Weight Dimensions LxWxH
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CC
CADDY™ TIG 2200I AC/DC 230/1 ph. 50/60 Hz 16 220/18.8 150/16 140/15.6 3-220A 4-160A 70 V 0.99 66% 16.46"x7.40"x13.58" (418x188x345mm) 33.07 lbs (15 kg) 700W/0.264 g.p.m. at 104°F (700W/1 l.p.m. at 40°C) 0.581 gal. (2.2 l) 0.528 g.p.m. (2.0 l.p.m.) 33.4 p.s.i. (2.3 bar) 9.92/14.77 lbs. (4.5/6.7 kg) 16.46"x7.40"x5.39" (418x188x137mm)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
155
© 2010 STEEL AND PIPES, INC.
CADDY™ TIG 2200i AC/DC
Output
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HELIARC® 252/352 AC/DC
Output
AC DC
Input
• Square wave AC output gives superior welding with improved cleaning and lack of rectification • AC wave balance control-allows adjustment from maximum cleaning to maximum penetration • Arc force control-fine tunes arc for stick welding from soft to a high penetration, digging arc • 100% solid state design with no mechanical contactor -eliminates output drift, lowers maintenance and promotes long life • Direct connections for Tig torch and quick lock output cable- for maximum convenience • Adjustable pre flow and post flow gas control-protects weld area and extends tungsten life • 6ft. (1.8m) gas hose and water in let and outlet fittings are factory installed • Protected against over heating and over current • 12 Ready-to-Weld Packages, add shield gas and power to weld
SPECIFICATIONS Rated output @ 40% Duty Cycle, 10 minute base, AC or DC For 208 vac, 60 Hz or 380 vdc 50 Hz, derate output by 10% Output Current Range, AC or DC Open Circuit Voltage (maximum) Net Weight, 60 Hz models Net Weight, 50 Hz models Approximate Shipping Weight, 60 Hz models Approximate Shipping Weight, 50 Hz models Width x Length x Height (both models) Primary input voltage & current at rated load of standard model ( 230(208)/460 vac 1 ph, 60 Hz 230/460/575 vac 1 ph, 60 Hz 220/400 (380-415) vac 1 ph, 50 Hz Primary input voltage & current at rated load of standard model 230/460/575 vac 1 ph, 60 Hz 220/400 (380-415) vac 1 ph, 50 Hz Power Factor @ rated load: Without power factor correction kit With power factor correction kit
Heliarc 252
Heliarc 352
280 amps @ 30 volts
350 amps @ 34 volts
5 - 320 amps 3 - 380 amps 79 vac; 72 vdc 79 vac; 72 vdc 375 lbs. 432 lbs. 415 lbs. 472 lbs. 385 lbs. 442 lbs. 425 lbs. 482 lbs. 18.75 in (46cm) x 32.5 in (83 cm) x 25 in (64 cm) without power factor correction kit) 112(118)/56 amps 152(168)/76 amps 112/56/45 amps 152/76/61 amps 104/57(60-55) amps 153/84(88-81) amps with power factor correction kit 77/38/31 amps 110/55/43 amps 78/40(42-38) amps 112/58(61-56) amps 52% 76%
RECOMMENDED ITEMS PAGE: 174, 176, 177
© 2010 STEEL AND PIPES, INC.
CC
156
HW-18 Torch
HW-26R Torch
HW-20 Torch
Uses HW-18 Torch
Uses HW-26R Torch
Uses HW-20 Torch
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
55% 76%
1 PHASE
Output
CC DC
Input
1 PHASE
• The MiniArc 150 Automatic Primary Select operates on either 110 or 230vac and will automatically configure to the primary input supplied • Designed to provide outstanding welding performance for Touch TigTM and Stick welding • 18 Pound weight - Makes this unit portable and easy to carry directly to the job. • Convenient sturdy plastic case accommodates the Mini Arc, welding cables,Tig torch and other accessories • Direct connections for Tig torch and electrode holder for maximum convenience and easy polarity change • Standard 14 Pin receptacle for remote current control • Tig welding with touch-start ignition selectable from the front panel • Protected against over heating and over current • Small and portable, inverter based • 5 to 150 Amps current range for DC Welding • Continuous current control for easy fine tuning
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MINIARC® 150 APS
• Low current draw
SPECIFICATIONS
MINIARC 150APS
MINIARC 150 APS
Miniarc 150APS Stick Package Includes: • Power Source • 10 Ft. Work Cable W/clamp • 10 Ft. Welding Cable W/electrode Holder • 1# 6013lV Electrodes • Plastic Carrying Suitcase.
115V OPERATING DATA: Output Range (Stick) ........................................ 5A/20V to 85A/23.5V Stick Duty Cycle & Rated Output .............. 100% - 85 amps @ 23.4 V Output Range (Tig) ............................................. 5A/20V to 100A/14V TIG Duty Cycle & Rated Output ............... 100% - 100 amps @ 14.0 V TIG Duty Cycle & Rated Output ............... 60% - 130 amps @ 15.0 V Primary Input Current @ 100% Duty Cycle ......................... 19 Amps Primary Input Current @ 60% Duty Cycle ........................... 26 Amps Open Circuit Voltage (max) ........................................................... 83V
230V OPERATING DATA: Output Range ...................................................... 5A/20V to 150A/26V Stick Duty Cycle ........................................ 110 amps/24.5 V @ 100% Stick Duty Cycle ......................................... 140 amps/25.6 V @ 60% TIG Duty Cycle ........................................... 110 amps/14.5 V @ 100% TIG Duty Cycle ................................................ 150 amps/16 V @ 60% Primary Input Current @ 100% Duty Cycle ......................... 17 Amps Primary Input Current @ 60% Duty Cycle ............................ 23 Amps Open Circuit Voltage (max) .......................................................... 83V Efficiency ..................................................................................... 83% Power Factor .................................................................................... .81 Net Weight ....................................................................... 18 lbs. (9 kg) W x L x H........... 5.75 in. (146mm) x 15 in. (381mm) x 11in. (279mm)
MiniArc 150APS Tig package includes • Power Source, Hw-17v 20ft. • Hw-17 Accessory Kit, • R33-fm580 Reg/flowmeter • 10 Ft. Work Cable W/clamp • 10 Ft. Welding Cable W/electrode Holder • 1# 6013lV Electrodes • Plastic Carrying Suitcase. HW-17 Torch
Uses HW-17 Torch
RECOMMENDED ITEMS PAGE: 172
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
157
© 2010 STEEL AND PIPES, INC.
Primary Input Voltage/Phase .... 115/208/230 vac, 1 ph., 50/60 Hz. Voltage Tolerance ................................................................ +/- 10%
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CADDY™ ARC 151i/201i POWER SOURCE Fifth generation Caddy™ machines feature advanced inverter technology built in – deliver unparalleled performance in a rugged, portable package • Adjustable hot start (A33) makes it easy to strike the electrode – avoids starting problems • Adjustable arc force (A33) sets the intensity of the arc – improves weld quality • ArcPlus™ II (A33) improves welding characteristics and simplifies work – produces better weld quality with less clean up • Equipped with large OKC 50 cable connectors – for greater durability • Features compact design with impact resistant polymer and aluminum casing – makes the unit lightweight and easy to carry • Small size does not compromise vital cooling of internal components • Large heat sinks and innovative design make these Caddy™ machines run cooler – promotes longer machine life even when used in harsh environments • Designed to keep sensitive interior parts clean and dust free • Built in accordance with IP23 for outdoor use, even in wet-weather conditions – makes this machine ideal for on-site work • Equipped with a PFC (Power Factor Correction) circuit – allows the machine to perform a full range of functions on a 16 A fuse, protects against fluctuating mains voltage, and makes it safer to use with a generator • Operates with extra long mains cables – expands working radius
Output
CC DC
Input
HW-17V-2 Torch
Uses HW-17V-2 Torch
RECOMMENDED ITEMS PAGE: 172
SPECIFICATIONS Caddy ™Arc 151i Caddy™Arc 201i
CONTROL PANELS
The advanced Caddy™ A33 features a digital display panel with hot-start and arc force control for fine tuning, MMA or TIG selection, LiveTi™ start, two memory settings and remote control. The Caddy™ A31 features a basic control panel with a single current setting knob, which makes it extremely easy to set.
MMA AND ARCPLUS™ II
© 2010 STEEL AND PIPES, INC.
Caddy™ Arc supplies direct current and allows you to weld most metals including alloy and non alloy steel, stainless steel and cast iron. With the Caddy™ Arc 151i, you can weld most 1/16" – 1/8" dia. electrodes and some 5/32" dia. electrodes. The Caddy™ Arc 201i welds electrodes up to 5/32" dia.
TIG WELDING
To TIG weld with the Caddy™ Arc, all you need is a TIG torch with a gas valve, gas regulator and cylinder of gas. Use scratch-start with the Caddy ™ A31 control panel. The Caddy™ A33 control panel provides Live Tig™ start for electronic control of the start current. You can weld mild steel or stainless steel with or without filler material.
158
Mains voltage V/ph Hz 230/1ph 50/60 Hz Fuse (slow), A 16 Recommended generator size, kVA 10 Permitted load at 104°F (40°C), MMA 25% duty cycle, A/V 150/26 60% duty cycle, A/V 100/24 100% duty cycle A/V 90/23.6 Permitted load at 104°F (40°C), TIG 25% duty cycle, A/V 150/16 60% duty cycle, A/V 120/14,8 100% duty cycle A/V 110/14,4 Setting range MMA (A31), A 8-150 Setting range MMA (A33), A 4-150 Setting range TIG (A33), A 3-150 Open circuit voltage (A31), V 58-72 Open circuit voltage (A33), V 72 Power factor at max. current 0.99 Efficiency at max. current 80 Dimensions LxWxH 16.46"x7.40"x8.19" (418x188x208mm) Weight 17.42 lbs (7.9 kg) Enclosure class IP 23 Application classification S Standards IEC/EN 60974-1
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
230/1ph 50/60 Hz 16 12 170/26.8 130/25.2 110/24.4 220/18.8 150/16.0 110/14.4 -4-170 3-220 -72 0.99 81 16.46"x7.40"x8.19" (418x188x208mm) 18.30 lbs (8.3 kg) IP 23 S IEC/EN 60974-10
1 PHASE
When it comes to exceptional quality, value, and the convenience of one-partnumber ordering, nobody delivers like GENUINE HELIARC®. These Tig Torch Outfits contain everything you need in one easy-to-use package.
TIG TORCH OUTFITS DESIGNED FOR H-252 & H-352 AIR-COOLED OUTFITS PART NO.
HW-17 604622
HW-17, 60 DEG. 25 ft.
16X50
l
HW-26, 75 DEG. 25 ft.
46V29
HW-18, 65 DEG. 25 ft.
948362
HW-20, 75 DEG. 25 ft.
948085
TORCH ACCESSORY KIT, HW-17,18, 26 TORCH ACCESSORY KIT, HW-20
999126 999127
l
R-33-FM-580 REGULATOR/FLOWMETER WATER HOSE, 6 ft.
21557 20633
l
35881
l
781F29
l
COMPONENTS
WORK CABLE & CLAMP w/OKC, 15 ft. GENUINE HELIARC ® TIG WELDING HANDBOOK
WATER-COOLED OUTFITS
HW-26 36678
HW-18 36679
HW-20 604623
l l l l
l l
l
l
l
l
l
l
l
l
l
l
l
TIG TORCH OUTFIT SELECTIONS FOR ALL OTHER POWER SUPPLIES AIR-COOLED OUTFITS PART NO.
HW-17 600991
HW-17, 60 DEG. 25 ft.
16X50
l
HW-17V, 60 DEG. 25 ft.
634706
HW-17RV, 60 DEG. 25 ft.
634706R
HW-17RV-2, 60 DEG. 25 ft.
33814R
HW-17FV, FLEX, 25 ft.
19884
HW-26, 75 DEG. 25 ft.
46V29
HW-26V, 75 DEG. 25 ft.
46V27
HW-26RV-2, 75 DEG. 25 ft.
HW-17V 600992
HW-17RV 36857
HW-17RV-2 600998
WATER-COOLED OUTFITS HW-17FV 600997
HW-26 600993
HW-26V 600994
HW-20 600995
l l l l l l
HW-18, 65 DEG. 25 ft.
948362
HW-20, 70 DEG. 25 ft.
948085
TORCH ACCESSORY KIT, HW-17,18, 26 TORCH ACCESSORY KIT, HW-20
999126 999127
l
R-33-FM-580 REGULATOR/FLOWMETER GAS HOSE, 25 ft.
21557 34V38
l
GAS HOSE, 12-1/2 ft.
40V77
l
l
l
l
l
GAS HOSE, 3 ft.
31504
l
l
l
l
l
l
l
l l l
l
l
l
l
l
l
l l
l
l
l
l
l
l
l
l
l
105Z57
POWER CBL. ADPTR., HW-26
45V62
POWER CBL. ADPTR., HW-18, 20
45V11
WORK CBL., 15 ft. w/CLAMP & LUG
34886
l
l
l
l
781F29
l
l
l
l
l
l
l
l
l
l
l
l
20633
POWER CBL. ADPTR., HW-17
TIG WELDING HANDBOOK
HW-18 600996
l
948128R
WATER HOSE, 6 ft. (2)
HW-26RV-2 600999
l l
l l
l
l
l
l
l
l
l
l
l
l
l
l
l
Sales Literature .......................................... (12-01-2006) ARC-23210
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
159
© 2010 STEEL AND PIPES, INC.
COMPONENTS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TIG TORCH OUTFITS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
GAS-COOLED TORCHES RATING@ 50% DUTY CYCLE HW-24
HARD BODY1 W/HFC™
SILICON RUBBER2
60 DEG. HEAD ANGLE
70/75 DEG. HEAD ANGLE
90 DEG. HEAD ANGLE
180 DEG. HEAD ANGLE
FLEX HEAD
WITH VALVE
80 amp
l
HW-90
120 amp
l
l
HW-9
140 amp
l
l
HW-9RV-2
140 amp
l
l
l
HW-9RV
140 amp
l
l
l
HW-9F
140 amp
l
HW-17
150 amp
l
l
HW-17-2
150 amp
l
l
HW-17R
150 amp
l
l
HW-17R-2
150 amp
l
l
HW-17F
150 amp
l
HW-17F-2
150 amp
l
HW-26
220 amp
l
HW-26-2
220 amp
l
HW-26R
220 amp
HW-26R-2
l
WITHOUT VALVE
l l
COMMENTS
l
MINIATURE, ULTRA LIGHT TORCH
l
SMALL, LIGHT WEIGHT TORCH
l
COMPACT, AIR-COOLED VERSION OF HW-20 SEPARATE POWER CABLE & GAS HOSE ROTARY VALVE
l
l
FLEXIBLE HEAD VERSION OF HW-20A
l
l
ROTARY VALVE & SLIDING VALVE AVAILABLE
l
l
SEPARATE POWER CABLE & GAS HOSE
l
l
ROTARY VALVE AVAILABLE
l
l
SEPARATE POWER CABLE & GAS HOSE
l
l
l
FLEXIBLE HEAD VERSION
l
l
l
SEPARATE POWER CABLE & GAS HOSE
l
l
l
POPULAR HEAVY DUTY AIR -COOLED TORCH
l
l
l
SEPARATE POWER CABLE & GAS HOSE
l
l
l
l
CONCENTRIC POWER CABLE
220 amp
l
l
l
l
SEPARATE POWER CABLE & GAS HOSE
HW-26F
220 amp
l
l
l
l
FLEXIBLE HEAD VERSION
HW-26F-2
220 amp
l
l
l
l
l
SEPARATE POWER CABLE & GAS HOSE
WATER-COOLED TORCHES RATING@ 50% DUTY CYCLE
HARD BODY1 W/HFC™
SILICON RUBBER2
HW-20
300 amp
HW-20R
300 amp
HW-18
425 amp
HW-18R
425 amp
l
HW-25F
200 amp
l
HW-27
400 amp
60 DEG. HEAD ANGLE
l
70/75 DEG. HEAD ANGLE
90 DEG. HEAD ANGLE
180 DEG. HEAD ANGLE
FLEX HEAD
WITH VALVE
l l
l
l l
l
l
l
l
l
l
WITHOUT VALVE
COMMENTS
l
COMPACT, HIGH CURRENT TORCH
l
COMPACT, HIGH CURRENT TORCH
l
GENERAL PURPOSE
l
GENERAL PURPOSE
l
FLEXIBLE HEAD, WATER TORCH
l
REAR LOADING MACHINE TORCH
Hard Body Torches with HFC™ (High temperature Fiber reinforced Composite material) provide the best performance, heat resistance, abrasion resistance, and high frequency resistance. 2 Rubber bodies provide improved resistance to breakage in rough duty. 1
© 2010 STEEL AND PIPES, INC.
Notes: 1. ESAB has made a model change on the HW-9 series torches. The new designation for that series of torches is HW-90. 2. ESAB has made a model change on the HW-20A series torches. The new designation for that series of torches is HW-9.
160
OLD DESIGNATION
HW-9 HW-20A HW-20AR HW-20AF HW-20ARV HW-20ARV2
NEW DESIGNATION
HW-90 HW-9 HW-9R HW-9F HW-9RV HW-9RV2
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
• Advanced Super SwitchTM technology makes multi-process welding a breeze. Simplified set up makes it easy to select Mig, Tig, or Stick • DC welding out put from 15 to 300 amps; rated 260 amps at 50% duty cycle • Output pre-set capability for quick set-up • Two digital meters for easy fine tuning • Heavy Duty Four Drive Roll stand • Convenient, large capacity built-in toolbox • Dual “Easy-On” cylinder tray • Pulse Mig capability with optional module • Touch Tig™ Start capability • Fan on demand
SPECIFICATIONS Rated DCCV or DCCC Output (10 min base) 50% duty cycle (NEMA Class I) ........................ 260 amps @ 27 vdc Output Current Range Mig (GMAW) ................................................................ 35-300 amps Tig (GTAW) ......................................................... 10-300 amps Stick (SMAW) ...................................................... 40-300 amps Open Circuit Voltage Mig (MGAW) ............................................................................ 70 vdc Tig (TGAW) .................................................................... 20 vdc Stick (SMAW) ......................................................................... 70 vdc Primary Input Voltage & Current @ 260 amp rated load 208/230 vac, 60 Hz, 1 ph ..................................... 57/52 amps Wire Feed Range .............................. 65-675 ipm (1.6 - 17.3 m/min) Net Weight ........................................................... 250 lbs. (112.5 kg) Shipping Weight .................................................290 lbs. (130.5 kg) W x L x H ..... 25.3 in. (64 cm) x 39.5 in. (100 cm) x 33.5 in. (85 cm)
Output
CV
DC
Input
1 PHASE
Remote Control Option “Spool-on-Gun” Option
Status Indicators
Digital Meter Volts, Amps, and Wire feed speed
Voltage Preset Process Selector Voltage/Current Control
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MULTIMASTER® 260 MULTI-PROCESS PACKAGE INDUSTRIAL READY-TO-WELD
Wire Feed Speed Control
Pulse Module Option Pulse Mig Welding of Carbon Steel, Stainless Steel and Aluminum
RECOMMENDED ITEMS PAGE: 169, 170, 172 Gun Master 250”NAS”
HW-17V-2 Torch
MT-250SG Spool Gun
MT-250SG Spool Gun
Uses HW-17V-2 Torch
Requires spool gun module
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
161
© 2010 STEEL AND PIPES, INC.
Uses Gun Master 250”NAS”
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MULTI POWER® 460 POWER SOURCE • Multi-process, three phase power source designed for heavy duty Industrial DC welding applications. • Use for High Performance Mig, Pulse Mig, Flux Cored wire, Stick electrode welding, Tig and Air Carbon Arc Gouging • SuperSwitch Technology design, provides superior inverter like performance in the welding arc while providing SCR like reliability. • Variable inductance for fine tuning of the arc characteristics in short arc welding. • Built-in arc force control for superior stick electrode performance. • Digital preset of voltage/amperage on all process at the front panel. • Sheet metal parts and hardware made of stainless steel. Top and side panel made of Kydex polymer for superior durability in harsh environments. • Auto Fan™ feature standard in the unit for energy savings. Automatically turns the fan motor on and off when needed. • Energy and power efficient, the best in its class with a 92% efficiency figure. Saves energy and reduces power costs. Uses up to 50% less current than conventional SCR machines. • Convenient 11 5vac auxiliary power receptacle. • Synergic / Non-Synergic Mig Pulse welding capability with the intelligence built into the power source (Standard on pulse unit, optional in the standard unit) Allows you to do Pulse Mig with almost any wire feeder. • 100% Solid State, no mechanical contactor • Compatible with DuraDrive 4-30 and DuraDrive 4-48 wire feeders • Touch Tig™ Start capability
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS Rated DC Output @ 100% Duty Cycle* 50/60Hz, cv or cc ......................................... 450 amps 38 vdc Rated DC Output @ 60% Duty Cycle* 50/60Hz, cv or cc ......................................... 500 amps 39 vdc Welding Range ............................................... 10A/12V to 500A/40V Open Circuit Voltage Max. ...................................................... 80vdc Primary Input Voltage and Current @ 100% DutyCycle 230(208)/460/575vac, 60Hz 3ph .................... 66/33/26 amps Power Factor at Rated Output .................................................. 89% Efficiency at Rated Output ........................................................ 92% Auxiliary Output Power ................................... 115vac 50/60Hz, 10 amps Physical Dimensions W x L x H ........ 18.8 in. (483mm) x 32.5 in. (819mm) x 25 in. (622mm) Net Weight .............................................................. 322 lbs.(146 Kg) Shipping Weight ..................................................... 375 lbs. (170Kg) * For 208 vac, 60 Hz service derate output current rating 10%.
162
Output
CC CV
Input
Voltage/Current Control Standard Control Panel
KEY OPTIONS
• 0558002671 -Pulse Option Mp460 • 0558002871 -MP 460 Remote Pendant 30ft • 37924 -TR-29 Truck Kit, 2 Cylinder • 36172 -SWIVEL POST ADPT 353/453/653 • 0588001197 –MP 460 115V Feeder Option • 0558006581 –Output Terminal Boot
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
3 PHASE
Process Selector
Digital Meters
Status Indicators
DC
Inductance control
MULTIMASTER 300
Output
DC
CC CV
3
Input
PHASE
READY-TO-USE WELDING PACKAGES
• Advanced SuperSwitch technology • DC welding output from 15 to 300 amps; rated at 40% duty cycle • Variable inductance control • Output pre-set control with two digital meters for quick setup • 250-amp torch for wires .035 in. (0.9 mm) and .045 in. (1.2 mm) diameter • Heavy-duty, four-drive roll stand with v groove drive rolls • Convenient built-in toolbox • Dual “easy-on” cylinder tray • Compatible with the Marathon Pak • AutoFan®
APPLICATIONS
• General fabrication and civil construction • Repair and maintenance • Power generation • Agriculture • Automotive • Pipe welding
TECHNICAL DATA
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
®
RATED DCCV OR DCCC OUTPUT (10 MIN BASE) 40% duty cycle (NEMA Class 1) Output current range: MIG/Fluxcore (GMAW/FCAW) Output current range: TIG (GTAW) Output current range: Stick (SMAW) Open circuit voltage: MIG/Fluxcore (GMAW/FCAW) Open circuit voltage: TIG (GTAW) Open circuit voltage: Stick (SMAW) Primary input voltage and current @ 300 A rated load 208/230 VAC, 60 Hz, 1 ph Wire feed range Shipping weight Dimensions L x W x H
300 A @ 32 vdc 35-300 A 10–300 A 40–300 A 70 vdc 20 vdc 70 vdc 66/60 A 65–675 in./min (1.6–17.3 m/min) 300 lbs (136 kg) 39.5 x 25.3 x 33.5 in. (1000 x 640 x 850 mm)
RECOMMENDED ITEMS* PAGE: 169, 172 HW-17V-2 Torch
MT-250SG Spool Gun
MT-250SG Spool Gun
Uses HW-17V-2 Torch
Requires spool gun module
ST-23A Spool Gun
FC-5C Foot Control # 0558 004 234
Electrode Holder
ST-23A Spool Gun
FC-5C Foot Control – 30 ft. (9.1 m) Cable
Assembly – 300 A, 15 ft. (4.5 m)# 21226 Includes holder, cable, and quick connector.
Requires 37301 adapter
requires remote control module.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
163
© 2010 STEEL AND PIPES, INC.
*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MIGMASTER® 215 PRO/280 PRO
Output
CV
COMPACT STRENGTH AND MOBILITY.
•2/4 stroke – simplifies welding •Creep start – gradual feed of wire for ultimate starts •Adjustable wire feed speed •Adjustable burnback timer – gives correct stick-out •Spot welding timer •Equipped with V/A digital meter •Outstanding welding characteristics – efficient, high-quality welding •Wide current and voltage range – multi-purpose applications •Sturdy, galvanized metal casing with air filter (optional)
APPLICATIONS
•Auto-repair •Metal fabrication •Transportation •Household and furniture •Tack welding
TECHNICAL DATA
Migmaster 215 Pro
INPUT VOLTAGE
208/230 VAC, 1 ph, 60 Hz 208/230 VAC, 1 ph, 60 Hz 230/460/575 VAC, 1 ph, 60 Hz 230/460/575 VAC, 1 ph, 60 Hz 53 A/48 A 74 A/66 A 53 A/26 A/21 A 66 A/34 A/26 A 250 A/23 V X X 300 A/29 V 160 A/22 V 250 A/26.5 V 110 A/19.5 V 194 A/23.7 V 40 A/16 V–250 A/23 V 40 A/16 V–300 A/29 V 0.95 0.97 76% 71% 75–700 in./min. 55–770 in./min. 0–0.25 sec. 0–0.25 sec. 0.2–2.5 sec. 0.2–2.5 sec. Selectable Selectable Migmaster 215 Pro Migmaster 280 Pro 12 21 33 x 16.7 x 32.7 in. (840 x 425 x 830 mm) 32 x 22 x 36.5 in. (840 x 552 x 925 mm) 216 lb (98 kg) 308 lb (140 kg) 14 to 104°F (-10 to +40°C) 14 to 104°F (-10 to +40°C) IP 23 S IP 23 S .023–.045 in. (0.6–1.2 mm) .047 in. (1.2 mm) .023–.045 in. (0.6–1.2 mm) .030–.045 in. (0.8–1.2 mm)
INPUT CURRENT @ 250 A 25% DC PERMITTED LOAD AT 20% DUTY CYCLE PERMITTED LOAD AT 40% DUTY CYCLE PERMITTED LOAD AT 60% DUTY CYCLE PERMITTED LOAD AT 100% DUTY CYCLE SETTING RANGE (DC) POWER FACTOR AT MAXIMUM CURRENT EFFICIENCY AT MAXIMUM CURRENT WIRE FEED SPEED BURNBACK TIME SPOT WELDING TIME CREEP START VOLTAGE STEPS DIMENSIONS L X W X H WEIGHT OPERATING TEMPERATURE ENCLOSURE CLASS WIRE DIMENSIONS: STEEL ALUMINUM STAINLESS CORED-WIRE
Migmaster 280 Pro
RECOMMENDED ITEMS* PAGE: 169 Air Filter
ST-23A Spool Gun
Cable and Torch Holder
MT-250SG Spool Gun
ST-23A Spool Gun (requires 37301 adapter)
Cable and Torch Holder
MT-250SG Spool Gun
Air Filter
© 2010 STEEL AND PIPES, INC.
DC
Cleanable/reusable optional filter.Extends time between required maintenance and protects components in harsh environments.
*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
164
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Input
1 PHASE
Output
CV
DC
Input
1 PHASE
• Rated 250 amp sat 50% duty cycle • DC welding output from 30 to 280 amps (24 ga>1/2") • 24 overlapping heat (voltage) steps for accurate fine tuning • Feeds wire from 20 to 650 ipm; pulse width modulated, solid state speed control • Built-in spool-on-gun control
SPECIFICATIONS Rated DCCV Output (10 min base) 50% duty cycle, 60 Hz Input .................... 250 amps @ 27 vdc 60% duty cycle (NEMA Class I), 60 Hz Input .... 225 amps @ 29 vdc 40% duty cycle, 50 Hz Input .................... 250 amps @ 27 vdc Output Current Range .................................................. 30-280 amps Open Circuit Voltage ................................................................ 55 vdc Primary Input Voltage & Current @ 250 amp rated load, 50/60 Hz, 1 phase 208/230/380/400/460/575 vac ..... 71/62/37/36/31/25 amps Wire Feed Range ............................... 20-650 ipm (0.5-16.3 m/min) Net Weight ................................................................ 210 lbs. (95 kg) Shipping Weight ..................................................... 220 lbs. (100 kg) W x L x H ...... 19.5 in. (50 cm) x 40 in. (102 cm) x 32.25 in. (82 cm)
RECOMMENDED ITEMS PAGE: 169, 170 Gun Master 250”NAS”
MT-250 SG Spool Gun
Gun Master 250”NAS”
(Optional) MT-250 SG Spool Gun Requires Spool Gun adapter
MIGMASTER® 275 COMPACT
Output
CV
DC
Input
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
INDUSTRIAL READY-TO-WELD MIG PACKAGE MIGMASTER® 250
1 PHASE
MORE POWER FOR THOSE TOUGH JOBS
• Rated 275 amps at 40% duty cycle - 200 amps continuous 100%. • DC welding output from 30 to 300 amps - new heavy plate parameters 5/8" and above. • 24 overlapping heat (voltage) steps for accurate fine tuning. • Flat and Slope taps for accurate fi ne tuning of short arc parameters for reduced spatter. • Feeds wire from 40 to 750 ipm; pulse width modulated, solid state speed control • Solid State contactor control for high reliability under repetitive short cycle welds. • Toolless polarity change • NAS gun connection with built-in torch wrap. • Built-in spool-on-gun control.
SPECIFICATIONS
RECOMMENDED ITEMS PAGE: 169, 170 Gun Master 250”NAS”
MT-250 SG Spool Gun
Gun Master 250”NAS”
(Optional) MT-250 SG Spool Gun Requires Spool Gun adapter
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
165
© 2010 STEEL AND PIPES, INC.
Rated DCCV Output (10 min base) 100% duty cycle, 60 Hz Input ............................200 amps @ 27 vdc 60% duty cycle (NEMA Class I), 60 Hz Input ... 250 amps @ 29 vdc 40% duty cycle, 50 Hz Input .............................275 amps @ 27 vdc Output Current Rang .............................................................30-280 amps Open Circuit Voltage ..............................................................55 vdc Primary Input Voltage & Current @ 250 amp rated load, 50/60 Hz, 1 phase 208/230/380/400/460/575 vac ................71/62/37/36/31/25 amps Wire Feed Range .......................................20-750 ipm (0.5-16.3 m/min) Net Weight .....................................................................210 lbs. (95 kg) Shipping Weight ............................................................220 lbs. (100 kg) W x L x H ..............19.5 in. (50 cm) x 40 in. (102 cm) x 32.25 in. (82 cm)
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
ORIGO™ FEED 3004 MA23
WITH MIG 4002C/5002C/6502C POWER SUPPLY
CC CV
DC
Output
Input
3 PHASE
FEEDER FEATURES
• Quick connectors – reduces setup times • Meets IEC 60974-5 safety standard with low voltage (42 VAC) operations and overload protection circuit to help eliminate breakdowns • TrueArcVoltage™ system – measures the correct arc voltage value independent of the length of the connection cable, return cable, or welding torch • Can be equipped with a counterbalance device, lifting eye, or wheel kit for increased mobility • Efficient hot-start and crater-fill functions for smooth starts and ends • Continuous adjustable inductor
POWER SOURCE FEATURES
PANEL (MMC) FUNCTIONS
•Multi-voltage – ready to work anywhere •Sleep mode saves power •Outstanding arc across total power range •Robust power technology •Dust filter to prevent grinding-dust and metal particles from entering the chassis (optional)
•Process select •2/4 stroke – simplifies handling of the welding torch •Gas pre/post flow •Digital V/A meters •Gas purge/wire inching •Memory for 3-parameter set
APPLICATIONS
•Civil construction •Mobile machinery •Foundries •General FAB •Pipe workshops •Ship and offshore yards •Transportation •Energy
FEEDER DATA POWER SUPPLY
WIRE SPOOL CAPACITY
MAX. SPOOL DIAMETER
WIRE FEED SPEED
DIMENSION (L X W X H)
WEIGHT, ENCLOSED
WIRE DIMENSIONS
42 VAC, 50/60 Hz
39 lb (18 kg)
12 in. (300 mm) (enclosed)
32-1000 in./min (0.8-25.0 m/min)
27.1 x 10.8 x 16.1 in. (690 x 275 x 420 mm)
33 lb (15 kg)
Steel Stainless steel Aluminum Cored wire
WEAR PARTS WIRE DIAMETER (IN.)
© 2010 STEEL AND PIPES, INC.
.023 / .030 .030 / .035–.040 .035–.040 / .045* .052 / .063
WIRE TYPE Fe, Ss, C Fe, Ss, C Fe, Ss, C Fe, Ss, C
1 FEEDER ROLLER
2 INLET NOZZLE
3 INTERMEDIATE NOZZLE
4 OUTLET NOZZLE
.023–.062 in. (0.6–1.6 mm) .023–.062 in. (0.6–1.6 mm) .040–.062 in. (1.0–1.6 mm) .030–.062 in. (0.8–1.6 mm)
GROOVE TYPE
MARKING
0459 052 001 0459 052 002 0459 052 003 0459 052 013
0455 049 001 0455 049 001 0455 049 001 0459 049 001
0455 072 002 0455 072 002 0455 072 002 0455 072 002
0469 837 880 0469 837 880 0469 837 880 0469 837 880
V V V V
0.6 S2 & 0.8 S2 0.8 S2 & 1.0 S2 1.0 S2 & 1.2 S2 1.4 S2 & 1.6 S2
.035–.040 / .045 .045 / .052 .063
C C C
0458 825 001 0458 825 002 0458 825 003
0455 049 001 0455 049 001 0459 049 001
0455 072 002 0455 072 002 0455 072 002
0469 837 880 0469 837 880 0469 837 880
V-K V-K V-K
1.0 R2 & 1.2 R2 1.2 R2 & 1.4 R2 1.6 R2
.030 / .035–.040 3/64 / .062
Al Al
0458 824 001 0458 824 003
0455 049 001 0455 049 001
0456 615 001 0456 615 001
0469 837 881 0469 837 881
U U
0.8 A2 & 1.0 A2 1.2 A2 & 1.6 A2
C = cored wire
166
* as delivered
K = knurled groove
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER SOURCE DATA 4002c
5002c
6502c
MAINS VOLTAGE PERMITTED LOAD AT 60% DUTY CYCLE PERMITTED LOAD AT 100% DUTY CYCLE
400 A / 34 V
500 A / 39 V
650 A / 44 V
310 A / 30 V
400 A / 34 V
500 A / 39 V
SETTING RANGE (DC) MIG/MAG
16–400 A / 8–60 V
16–500 A / 8–60 V
16–650 A / 8–60 V
SETTING RANGE MMA OPEN CIRCUIT VOLTAGE GMAW/FCAW (MIG/MAG)
16–400 A
16–500 A
16–650 A
62 V
62 V
62 V
OPEN CIRCUIT VOLTAGE SMAW (MMA) OPEN CIRCUIT POWER
68 V 500 W
68 V 550 W
68 V 670 W
IN ENERGY SAVING MODE, 15 MIN. AFTER WELDING POWER FACTOR AT MAXIMUM CURRENT
60 W
60 W
60 W
0.88
0.90
0.90
EFFICIENCY AT MAXIMUM CURRENT
70%
72%
76%
CONTROL VOLTAGE DIMENSIONS LXWXH WEIGHT
42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 328 lb (149 kg)
42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 407 lb (185 kg)
42 V, 50/60 Hz 32.6 x 25.1 x 32.8 in. (830 x 640 x 835 mm) 489 lb (222 kg)
WEIGHT WITH COOLING UNIT
359 lb (163 kg)
438 lb (199 kg)
520 lb (236 kg)
OPERATING TEMPERATURE ENCLOSURE CLASS
14 to 104°F (-10 to 40°C) IP 23
14 to 104°F (-10 to 40°C) IP 23
14 to 104°F (-10 to 40°C) IP 23
--------------230/400–415/500 V, 50 Hz ----- 230/430–460 V, 60 Hz-----------------
CONNECTION CABLE SETS
5.5 ft. (1.7 m) air-cooled torch, 10 pole..................................... 0349 312 450 16.4 ft. (5.0 m) air-cooled torch, 10 pole................................... 0349 312 451 32.8 ft. (10.0 m) air-cooled torch, 10 pole................................. 0349 312 452 49.2 ft. (15.0 m) air-cooled torch, 10 pole ................................ 0349 312 453 82.0 ft. (25.0 m) air-cooled torch, 10 pole................................. 0349 312 454 114.8 ft. (35.0 m) air-cooled torch, 10 pole............................... 0349 312 455 Includes: control cable, electrode cable, and gas hose.
TORCHES
Gun Master 400cc 25 ft. (7.6 m) Basic...................................... 0558 001 674 Gun Master 400cc 10 ft. (3 m) x .035–.045 in.......................... 0558 001 665 Gun Master 400cc 12 ft. (3.6 m) x .035–.045 in....................... 0558 001 667 Gun Master 400cc 15 ft. (4.5 m) x .035–.045 in. ..................... 0558 001 669 Gun Master 400cc 15 ft. (4.5 m) x .052–1/16 in....................... 0558 001 670
RECOMMENDED ITEMS* Electrode Holder
Cable and Torch Holder
Air Filter
Power Source Strain Relief for Connection Cables
Air Filter
Cable and Torch Holder
Power Source Strain Relief for Connection Cables # 0349 311 700 Recommended when moving power supply frequently and use of long connection sets.
*IF YOU CAN’T FIND AN ITEM IN OUR CATALOG, PLEASE CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
167
© 2010 STEEL AND PIPES, INC.
Assembly – 300 A, 15 ft. (4.5 m)# 21226 Includes holder, cable, and quick connector.
# 0349 302 252 Cleanable/reusable optional filter.Extends time between required maintenance and protects components in harsh environments.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TIG ACCESSORIES FOOT AMPTROL®
Provides 25 ft. (7.6 m) of remote output control for TIG welding. (6-pin plug connection). Order K870
TIG MODULE
Portable, high frequency unit with gas valve for TIG welding. Rated at 300 amps/60% duty cycle. Order K930-2
COOL ARC® 40 WATER COOLER
Reliable and affordable water cooler for water-cooled MIG, TIG, or plasma cutting applications. Order K1813-1 for 115/1/50/60 Order K2187-1 for 220-240/1/50/60
CONTACTOR KIT
Installs in the K930-2 TIG Module for use with welders without a contactor. Makes the TIG torch electrode electrically “cold” until the Amptrol® is activated. Order K938-1
HAND AMPTROL®
Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection). Velcro straps secure it to the torch. Order K963-3 (One size fits all Pro-Torch™ TIG Torches.)
TIG-MATE™ 17 AIR-COOLED TIG TORCH STARTER PACK Includes Ultra-Flex™ Torch!
© 2010 STEEL AND PIPES, INC.
UNDERCARRIAGES AND CARTS
Wheel Kit Includes axle, two wheels, and assembly hardware. Can be installed in minutes. Order K761 for AC-225, AC/DC-225/125
168
Get everything you need for TIG welding in one complete easy-to-order kit packaged in its own portable carrying case. Includes: PTA-17 Ultra-Flex™ torch, parts kit, Harris® flowmeter/regulator, 10 ft. (3.0 m) gas hose, Twist-Mate™ adapter, and work clamp and cable. Order K2266-1
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
MAGNUM MIG GUNS
MAGNUM® 100L GUN AND CABLE
Assembly Extremely small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications. Standard equipment on current Lincoln SP-140T and SP-180T, Power MIG® 140C, and 180C. Includes gun connector. Order K530-5
MAGNUM® 250L GUN AND CABLE ASSEMBLY
Recommended for medium duty job shop and production applications. Standard equipment on the current Lincoln Power MIG 216 and Power MIG® 255XT wire feeder/welders. Includes gun connector. Order K533-7
WIRE DIAMETER .025-.035IN.(0.6-0.9MM)
WIRE DIAMETER .035-.045IN.(0.9-1.2MM)
CABLE LENGTH 10 (3.0)
Magnum® 250L
12 (3.6) 15 (4.5)
K533-7 (FixedGas Nozzle) K533-3 (Adjustable Gas Nozzle)
Magnum® 300
10 (3.0) 12 (3.6) 15 (4.5) 10 (3.0) 12 (3.6) 15 (4.5)
K470-1 K470-7 K470-2 K471-1 K471-7 K471-2
Magnum 400 DUALSCHEDULE Magnum® 400 DUALPROCEDURE Magnum® 400 SHORT NECK
WIRE DIAMETER .052-1/16 IN.(1.3-1.6MM)
WIRE DIAMETER 1/16-5/64 IN.(1.6-2.0MM)
OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE OPEN-END FAST-MATE PACKAGE
GUN TYPE
®
Lightweight, Quick and Agile — All The Muscle Without the Bulk! 400amp, Short Neck, 15 ft. Length Heavy Duty Expendable Parts Order K574-1
This popular Magnum gun is intended for most.035–.045 in. wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG® 350MP wire feeder/welder. Order K470-1
Magnum® 100L
Magnum® 400 STANDARD
MAGNUM® 400 GUN AND CABLE ASSEMBLY
MAGNUM® 300 GUN AND CABLE ASSEMBLY
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
WELDING GUNS
K530-5 K530-6 (1)
K530-3 (FCAW-SSonly)
20 (6.1) 25 (7.6) 15 (4.5) 25 (7.6)
K574-1 K574-4
10 (3.0) 15 (4.5) 25 (7.6) 10 (3.0) 15 (4.5)
K1722-2 K1722-3 K541-1 K541-3
K478-1 K478-2 K479-7 K479-2
K1802-1(2)
K2286-1(2) K471-21(3)
K575-1
K470-4
K478-3
K471-8 K471-4
K479-4
K471-11 K471-14 K574-2
K575-2
K470-6
K471-22(3)
K471-6
K479-6
K471-23(3)
K471-15
K1723-1 K1723-2 K541-23(2)
(1)
Includes 4-pin MS-Typeconnection for trigger control Includes K466-1 ConnectorKit (3) Includes K466-10 ConnectorKit
GUNTYPE Magnum® 550
CABLE LENGTH FT.(M) 10 (3.0) 12 (3.6) 15 (4.5) 25 (7.6)
WIRE DIAMETER .035-.045IN.(0.9-1.2MM) GUN CONNECTOR 600A OPEN-END — — — K598-4
WIRE DIAMETER .052-1/16 IN.(1.3-1.6MM) GUN CONNECTOR 600A OPEN-END 500A OPEN-END K598-5 K598-6 K598-7 —
— — K598-16 —
WIRE DIAMETER 5/64-3/32 IN.(2.0-2.4MM) GUN CONNECTOR 600A OPEN-END 500A OPEN-END — — K598-11 —
— — K598-17 —
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
169
© 2010 STEEL AND PIPES, INC.
(2)
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
SPOOL GUNS
MAGNUM® SG SPOOL GUN
The Magnum® SG – a lightweight, well balanced semiautomatic spool gun designed for easy and reliable aluminum wire feeding with a variety of CV power sources and engine-driven welders. Rated 250 amps @ 60%, the Magnum® SG features a generous 25 ft (7.5 m) gun cable and integrated wire feed speed control in the handle to cut your trips back to the power source. Easy to set up, operate and maintain...the Magnum® SG is a great addition to your welding tool set.
MAGNUM® 100SG SPOOL GUN
The Magnum® 100SG spool gun is the lowest cost way to add reliable and precise spool gun wire feeding performance for soft aluminum wire. It’s easy to set up, does not require a bulky outboard adapter/power module and shares gun expendable parts with the standard MIG gun included with the Power MIG® models. MODEL
PRODUCT NUMBER
LENGTH FT.(M)
DIAMETER IN.(MM)
MACHINE
ADAPTER
Magnum 100SG
K2532-1
10 (3.0)
.030-.035 (0.8-0.9)
130A/30%
POWER MIG216 POWER MIG180C POWER MIG140C SP-180T, SP-140T
None
Magnum SG
K487-25
25 (7.5)
.025-3/64 (0.6-1.2)
250A/60%
® POWER MIG 216
K2703-1
Magnum 250 LX
K2490-1
25 (7.5)
.025-3/64 (0.6-1.2)
CO2:300A/60% Ar: 280A/60% Ar: 200A/100%
POWER MIG350MP POWER MIG255XT POWER MIG216
None None K2703-1
DESCRIPTION
MAGNUM® SG SPOOL GUN ACCESSORIES
© 2010 STEEL AND PIPES, INC.
SG CONTROL MODULE Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor. Order K488
170
CONTROL MODULE INPUT CABLE Terminal Strip and Lug. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having terminal strip and lug connections. Order K492-10
CONTROL MODULE INPUT CABLE 14-pin MS-type & Lug. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power connections. Order K691-10
CONTROL MODULE INPUT CABLE 14-pin MS-type and Twist-Mate™. Required for connection of control module to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0 m). For Lincoln® power sources having 14-pin MS-type control connections and Twist-Mate™ power connections. Order K493-10
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
MT-250 SG SPOOL GUN • Designed for use with the Migmaster 250, Migmaster 203, Migmaster 253, MultiMaster 260,and also for 353cv, 350mpi, SVI-450i, 453cv Multi-power 460, 653cvcc with MIG-28A control package. • Weighs less than 3 lbs. • Uses durable MT contact tips and nozzles • Powerful gear motor in handle pulls welding wire from 4 in. diameter spool in the molded gun case • Partial depression of the torch trigger controls gas pre-and post-flow operations-full depression provides wire feeding as well as gas flow • Wire feed control mounted on gun provides precise adjustment of wire feed rate at torch
MT-250 SG • Medium-duty 200 amp, 100% duty performance • Spool holder adjusts to balance in the operator's hand • 25ft. service lines
Control Cable - 6 ft. for non-ESAB Power Sources ................ 996736 Secondary Contactor Kit - 300 Amp. .............................. 677333 Secondary Contactor Control Cable - 1.5 ft. .................... 677389 Anti-Stick (Burnback) Kit .................................................. 2075076
OPTIONS & ACCESSORIES MT-250 SG
ORDERING INFORMATION
Zippered Hose Sheath 25 ft. for gun service line protection ...................................... 35454 Gun Extension Lines Gas Hose Assembly, 25 ft. ....................................................... 34V38 Coupling, Gas Hose (5/8 in. - 18 in.) ..................................... 11N17 Quick Connector, Male #2 - 1/0 ....................................... 13733936 Quick Connector, Female #2 - 1/0 ..................................... 13735632 Gas Meter (measures gas flow at the gun) ................................ 19043 Feed Roll - .030-3/64 in. Soft wire(.8-1.2 mm) ................... *36866 Feed Roll Knurled - .030-.045 in. Hard wire(.8-1.2 mm) ..... 36867 Inlet Guide Liner - .030-3/64 in. (.8-1.2 mm) Gray .............. 36869 Barrel Liner - .030-3/64 in. (.8-1.2 mm) White ..................... 36871
Mig-28A, MT-250SG Package - Includes Mig-28A control, spool gun, three 3/64 in. contact tips, drive roll, liner, control cable, gas hose and #10 nozzle and 25 ft. service lines .............................................................. 37707 MT-250 SG Spool Gun - Includes three 3/64 in. contact tips, drive roll, liner, control cable, gas hose and #10 nozzle and 25 ft. service lines ....................................................... 36779 Control Cable - 6 ft. for ESAB CV Power Sources ............... 36618
MIG SPOOL GUN ACCESSORIES ST-23A, MT-250SG Spool Guns TABLE 1. CONTACT TIPS WIRE SIZE .023 in. (0.6mm) .030 in. (0.8mm) .030 in. (Notched) .035 in. (0.9mm) .035 in. (Notched) .040 in. (1.0mm) .045 in. (1.2mm) 3/64 in. (Notched) 3/64 in. (1.2mm)
SHORT – – – – – – 999578 – –
*STANDARD DUTY MEDIUM 20543 20544 36884 996995 36885 37287 37290 36886 (b) 996999 (a)
LONG 999742 996994 – 996996 – 37288 996998 – –
**HEAVY DUTY MEDIUM – 0558002367 – 0558002368 – 0558002369 37286 – 17765
TABLE 2. NOZZLES SIZE No. 6 No. 8 No. 8 HD No. 10 No. 10 HD No. 12 HD No. 12 Spot
INSIDE DIAMETER 3/8 in. (10mm) 1/2 in. (13mm) 1/2 in. (13mm) 5/8 in. (16mm) 5/8 in. (16mm) 3/4 in. (20mm) 3/4 in. (20mm)
STANDARD DUTY 998895 998893 – 998894 – – 17316*
HEAVY DUTY – – 999471 – 999472** 999473 999625
SUPER DUTY – – – – – 17350 –
*Requires Tip Adapter 17983 ** RequiresTipAdapter 17984 (a) Included with ST-23A (b) Included with MT-250SG
*Requires 17293 Tip Adapter and 17321 Adapter **Included with ST-23A and MT-250SG
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
171
© 2010 STEEL AND PIPES, INC.
CONTACT TIPS INSIDE DIAMETER 0.031 0.037 0.043 0.043 0.048 0.048 0.054 0.060 0.058
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
GUN MASTER 250 & 400 • “Slide-on” standard and heavy duty copper wall nozzles deliver performance and dependability • Lightweight handle is impact resistant for long life • Cable resists cuts, spatter, oil and abrasion
ORDERING INFORMATION Complete Assemblies (NAS Style) Gun Master 250 NAS 10 ft. x .023 ............................... 0558001630 Gun Master 250 NAS 10 ft. x .035-.045 ...................... 0558001631 Gun Master 250 NAS 12 ft. x .035-.045 ....................... 0558001635 Gun Master 250 NAS 15 ft. x .035-.045 ...................... 0558001639 Gun Master 400 NAS 10 ft. x .035-.045 ...................... 0558001653 Gun Master 400 NAS 10 ft. x .052-1/16 ....................... 0558001654 Gun Master 400 NAS 10 ft. x .035-3/64 Al .................. 0558001655 Gun Master 400 NAS 12 ft. x .035-.045 ...................... 0558001656 Gun Master 400 NAS 12 ft. x .052-1/16 ....................... 0558001657 Gun Master 400 NAS 12 ft. x .035-3/64 Al .................. 0558001658 Gun Master 400 NAS 15 ft. x .035-.045 ...................... 0558001659 Gun Master 400 NAS 15 ft. x .052-1/16 ....................... 0558001660 Complete Assemblies (CC Style) Gun Master 250cc 10 ft. x .023 .................................... 0558001643 Gun Master 250cc 10 ft. x .035-.045 ........................... 0558001644 Gun Master 250cc 12 ft. x .035-.045 ........................... 0558001645 Gun Master 250cc 15 ft. x .035-.045 ........................... 0558001649 Gun Master 400cc 10 ft. x .035-.045 ........................... 0558001665 Gun Master 400cc 10 ft. x .052-1/16 ............................ 0558001666 Gun Master 400cc 12 ft. x .035-.045 ........................... 0558001667 Gun Master 400cc 12 ft. x .052-1/16 ............................ 0558001668 Gun Master 400cc 15 ft. x .035-.045 ........................... 0558001669 Gun Master 400cc 15 ft. x .052-1/16 ............................ 0558001670 Basic (NAS Style) Gun Master 400 NAS 25 ft. Basic ................................ 0558001664 Basic (CC Style) Gun Master 400cc 25 ft. Basic ..................................... 0558001674
Steel & Flux Core
.023 x 10,12,15 ft. Liner ................................................ 0558001675 .030 x 10,12,15 ft. Liner .......................................................... 37031 .035/.045 x 10,12,15 ft. Liner .................................................. 37032 .052-1/16 x 10,12,15 ft. Liner .................................................. 37033 5/64 x 10,12,15 ft. Liner ................................................ 0558001676 3/32 x 10,12,15 ft. Liner .......................................................... 37034 7/64-1/8 x 10,12,15 ft. Liner .................................................. 952948 .035 - .045 x 25 ft. Liner ............................................... 0558002137 .052 - 1/16 x 25 ft. Liner ............................................... 0558002138 5/64 x 25 ft. Liner ......................................................... 0558002139 3/32 x 25 ft. Liner ......................................................... 0558002140
OPTIONS
Aluminum
ESAB Power Pin for MIG 35 ........................................ 0558002313 Lincoln Power Pin ........................................................ 0558001862 45 Degree 250Amp Gooseneck ................................... 0558001616 (for Gun Master 250) Gas Meter (measures gas flow at the gun) ........................... 19043
Trigger Leads, ESAB Style
Gun Amperage Ratings 100% DUTY CYCLE GUN MASTER CO 2 MIXED 250 AMP 250 180 400 AMP 400 275
60% DUTY CYCLE CO 2 MIXED 300 250 525 400
Note: Ratings are based on tests that comply with NEMA ARC Welding Section Standard 11-6-1975 for Duty Cycle. “The time period of one complete cycle shall be 10 minutes” (60% = 6 minutes). National Electrical Manufacturers Association, 2101 L Street N.W., Washington, D.C., 20037.
172
.035-3/64 x 15 ft. Poly Liner ................................................. *37039 3/64-1/16 x 15 ft. Poly Liner .................................................. *37040 *Requires Liner Sleeve P/N 055800 3050 when H.D. partsused. Note: All 15 ft. Liners can be trimmed to fit 10 ft. or 12 ft. Trigger Lead 6 in., Gun Master 250 .............................. 0558001815 Trigger Lead 24 in., Gun Master 250 ........................... 0558002583 Trigger Lead, Gun Master 400 ............................................ 2075216
SPECIFICATIONS
© 2010 STEEL AND PIPES, INC.
CONSUMABLES & ACCESSORIES Liner Selection
Control Plugs (Options) Lincoln (LN 7, 8, 9, NAZ) .............................................. 0558001864 Instruction Manual Gun Master 250 ............................. F-15-612 Instruction Manual Gun Master 400 ............................. F-15-613 Sales Literature ......................................... (12-01-2006) ARC-23095
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WIRE TYPE AND SIZE
Hard Wires .030 in. (0.8mm) .035 in. - .045 in. (0.9mm - 1.2mm) .045 in. - 1/16 in. (1.2 - 1.6mm) 5/64 in. - 3/32 in. (2 - 2.4mm) Soft Wires .035 in. (0.9mm) 3/64 in. - 1/16 in. (1.2 - 1.6mm)
LINER
37031 37032 37033 37034 37039 37040
STANDARD DUTY TIPS WIRE SIZE PART NO.
HEAVY DUTY TIPS WIRE SIZE
.023 .030 .035 .045 .045 - 3/64 .052 1/16 5/64
.030 .035 .040 .045 3/64 (Aluminum) .052 1/16 (Hard or Cored Wire) 1/16 (Aluminum) 5/64 3/32
20543 20544 996995 37290 996999 2075349 996997 2075230
PART NO.
0558002367 0558002368 0558002369 37286 17765 17778 37291 948835 948832 948833
Nozzles STANDARD DUTY INSIDE DIAMETER
3/8 in. 1/2 in. 1/2 in. 1/2 in. 5/8 in. 5/8 in.
TIP RELATIONSHIP USING ALL SIZES STANDARD AND HEAVY DUTY TIPS 5/64 IN. & 3/32 IN.
TIP RELATIONSHIP USING ALL SIZES HEAVY DUTY TIPS EXCEPT 5/64 IN. & 3/32 IN.
Flush 1/8 in. Recess Flush 1/8 in. Stick Out Flush 1/8 in. Stick Out
Copper Copper Copper Copper Copper Copper
1/8 in. Recess Flush 1/8 in. Stick Out 1/4 in. Stick Out 1/8 in. Stick Out 1/4 in. Stick Out
0558001599 0558001600 0558001598 0558001601
1/8 in. Recess 1/4 in. Recess Flush 1/8 in. Stick Out
Copper Copper Copper Copper
Flush 1/8 in. Recess 1/8 in. Stick Out 1/4 in. Stick Out
0558001602
1/4 in.
Brass
1/4 in.
PART NO.
0558001609 0558001612 0558001611 0558001613 0558001614 0558001615
STD. DUTY TIP/NOZ. ADAPTOR
Tip/Adaptor HEAVY DUTY INSIDE DIAMETER
5/8 in. 5/8 in. 5/8 in. 5/8 in.
0558001608
PART NO.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Contact Tips
Liners for Gun Master 250/400
SPOT
Spot Nozzle
HEAVY DUTY TIP/NOZ. ADAPTOR
Tip/Adaptor
0558001888
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
173
© 2010 STEEL AND PIPES, INC.
All tips are the medium length to give these relationships.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HW-17 TORCH FAMILY - 150 AMP • Quick release of electrodes • Hard body provides superior heat and abrasion resistance for longest life • Silicon rubbor body provides improved resistance to breakage in rough duty • Flexible head models provide added versatility for reaching hard-to-get-t applications
SPECIFICATIONS: Capacity
130 Amps, 100% duty cycle, ac or dc 150 Amps, 50% duty cycle, ac or dc with std. accessories
Size
OVERALL LENGTH...................... 8-1/8 in. (206 mm) HANDLE DIAMETER......................... 3/4 in. (19 mm) LENGTH OF HEAD... (short cap) 3-13/16 in. (97 mm) (medium cap) 5-1/4 in. (133 mm) (long cap) 7-7/16 in. (189 mm) DIAMETER OF HEAD.....................51/64 in. (20 mm) WEIGHT (less cable)........................ 4.8 oz. (137 gm) HEAD ANGLE: HW-17, HW-17R....... 60 or 90 degree HW-17F................................................. variable
Torch Assemblies DESCRIPTION
60 DEG. HEAD, 12-1/2 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 60 DEG. HEAD, 25 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 60 DEG. HEAD w/SLIDE VALVE 12-1/2 ft.,1-pc.cable & hose ay. 25 ft., 1-pc. cable & hose ay. 60 DEG. HEAD w/ROTARY VALVE, 12-1/2 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 60 DEG. HEAD w/ROTARY VALVE, 25 ft. 1-pc. cable & hose ay. 2-pc. cable & hose ay. 2-pc. cable & hose ay. twist lock 90 DEG. HEAD, 25 ft. 1-pc. cable & hose ay. 90 DEG. HEAD w/SLIDE VALVE, 25 ft. 90 DEG. HEAD w/ROTARY VALVE, 25 ft.
HW-17 HARD BOD Y
HW-17R SILICON RUBBER
HW-17F FLEX HEAD
16X48 33855 35782
16X48R — —
19881 — —
16X50 33856
16X50R —
19883 —
634705 634706
— —
— —
16X48LV 33813 35857
634705R 33813R —
19882 33815 —
16X50LV 33814 35856
634706R 33814R —
19884 33816 —
634720 601152 —
— — 601152R
— — —
Cups, Collets, & Collet Bodies ELECTRODE SIZE, in.
STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY
© 2010 STEEL AND PIPES, INC.
CUP NUMBER
HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP
174
.020 10N21 10N29 45V29 — 4=1/4 10N50 105Z43 54N18 — 54N35
.040 10N22 10N30 45V24 — 5=5/16 10N49 105Z42 54N17 — 54N34
1/16 10N23 10N31 45V25 — 6=3/8 10N48 105Z44 54N16 — 54N33
3/32 10N24 10N32 45V26 45V64 7=7/16 10N47 105Z45 54N15 — 54N32
1/8 10N25 10N28 45V27 995795 8=1/2 10N46 08N78 54N14 — 54N31
— — — — — 10=5/8 10N45 08N79 — 53N88 —
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
— — — — — 12=3/4 10N44 08N80 — 53N87 —
— — — — — SHORT — — 54N19 53N89 —
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
For selection of special ceramic or sleeved cups, see Accessories following Torches. Torch Parts & Accessories ITEM
PART NO.
DESCRIPTION
57Y06 BODY, HW-17 57Y06LV BODY, HW-17V w/valve 19621 57Y06R BODY, HW-17R 19576R BODY, HW-17RV w/valve 19621 19885 BODY, HW-17F 19886 BODY, HW-17FV w/valve 19621 601477 BODY, HW-17N (90 DEG.) 2 105Z55 HANDLE, HW-17, HW-17V, HW-17R, HW-17F 105Z55R HANDLE, RIBBED (optional) 13 3 57Y02 LONG TORCH CAP w/O-RING (98W18) 4 34015 MEDIUM TORCH CAP w/O-RING (98W18) 5 57Y04 SHORT TORCH CAP w/O-RING (98W18) 6 17732 ARGON SHUT OFF SLIDE VALVE AY. 7 – COLLET (see table above) 8 – COLLET BODY (see table above) 9 – GAS CUP (see table above) 10 10 54N01 INSULATOR, Req'd for GAS LENS 54N63 INSULATOR, Req'd for GAS LENS, LG. DIA. 11 – GAS LENS COLLET BODY (see table above) 11 12 – GAS LENS CUP (see table above) 13 105Z57 POWER CABLE ADAPTOR 14 997022* 1-pc. POWER CABLE, 12 1/2 ft. 12 997023* 1-pc. POWER CABLE, 25 ft. 15 33946 2-pc. POWER CABLE & HOSE AY., 121/2 ft. 33947 2-pc. POWER CABLE & HOSE AY., 251/2 ft. 16 35873 2-pc. POWER CABLE & HOSE AY., T.L.12 1/2ft. 0558002476 2-pc. POWER CABLE & HOSE AY., T.L. 25 ft. 34651 2-pc. POWER CABLE REPAIR KIT (not shown) *Optional PVC Power Cable 57Y01 (12-1/2 ft.); 57Y03 (25 ft.)
HW-17 TORCH
1
4
3 5
2
7
6
1 8
9
14
15 / 16
In Steel and Pipes
WE HAVE A WIDE VARIETY OF ORNAMENTAL IRON DESIGNS AND ACCESSORIES FOR ALL YOUR PROJECT NEEDS:
We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
175
© 2010 STEEL AND PIPES, INC.
• RAILINGS • GATES • STAIRS • FENCES • DECORATIVE DESIGNS AND MORE.....
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HW-18 TORCH FAMILY - 425 AMP • The industry standard water-cooled general purpose torch • Ideal for production welding Lightweight - reduces operator fatigue • Watertight - brazed, closed cooling system • Gas lens available for improved shielding • Hard body w/HFCTM (HW-18) provides superior heat and abrasion resistance for the longest life • Economical silicon rubber body (HW-18R) provides resistance to breakage
SPECIFICATIONS: Capacity
300 Amps, 100% duty cycle, ac or dc with standard accessories 375 Amps, 100% duty cycle, ac or dc with gas lens accessories 425 Amps, 50% duty cycle, ac or dc
Size OVERALL LENGTH...................10-1/2 in. (267 mm) HANDLE DIAMETER...................1-1/16 in. (27 mm) LENGTH OF HEAD... (short cap) 3-3/16 in. (81 mm) (medium cap) 5-7/16 in. (138 mm) (long cap) 7-7/16 in. (189 mm) DIAMETER OF HEAD...................29/32 in. (23 mm) WEIGHT (less cable)......................... 7 oz. (200 gm) HEAD ANGLE: HW-18.............................. 60 degree COOLING REQUIREMENTS...1 qt. min. (0.94 l/min)
Torch Assemblies DESCRIPTION
60 DEG. HEAD cable & hose, 12-1/2 ft. cable & hose, 25 ft.
HW-18 HARD BOD Y
HW-18 SILICON RUBBER
948361 948362
948361R 948362R
Cups, Collets, & Collet Bodies ELECTRODE SIZE, in.
STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY CUP NUMBER
HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP
.020
.040
1/16
3/32
1/8
10N21 10N29 45V29 —
10N22 10N30 45V24 —
10N23 10N31 45V25 —
10N24 10N32 45V26 45V64
10N25 10N28 45V27 995795
— — — — —
— — — — —
— — — — —
4=1/4
5=5/16
6=3/8
7=7/16
8=1/2
10=5/8
12=3/4
SHORT
10N50 105Z43 54N18 — 54N35
10N49 105Z42 54N17 — 54N34
10N48 105Z44 54N16 — 54N33
10N47 105Z45 54N15 — 54N32
10N46 08N78 54N14 — 54N31
10N45 08N79 — 53N88 —
10N44 08N80 — 53N87 —
— — 54N19 53N89 —
© 2010 STEEL AND PIPES, INC.
For selection of special ceramic or sleeved cups, see Accessories following Torches.
176
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Torch Parts & Accessories ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PART NO. 948350 948350R 10N15 10N15A 57Y02 34015 57Y04 – – – 54N01 54N63 – – 45V11 40V64 41V29 40V75 41V30 40V74 41V32 98W43 11N16
DESCRIPTION BODY, HW-18 BODY, HW-18R HANDLE, HW-18 HANDLE, HW-18R LONG TORCH CAP w/O-RING (98W18) MEDIUM TORCH CAP w/O-RING (98W18) 5 SHORT TORCH CAP w/O-RING (98W18) COLLET (see table above) COLLET BODY (see table above) GAS CUPS (see table above) 6 INSULATOR, Req'd for GAS LENS INSULATOR, Req'd for GAS LENS, LG. DIA. GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) 9 POWER CABLE ADAPTOR POWER CABLE, 12-1/2 ft. 10 POWER CABLE, 25 ft. 7 GAS HOSE, 12-1/2 ft. GAS HOSE, 25 ft. 11 8 WATER HOSE, 12-1/2 ft. WATER HOSE, 25 ft. HOSE CLAMP WATER ADAPTOR (5/8 - 18 LH to 1/4 NPT) (not shown)
HW-18 TORCH 3
4
2
1 13
12
16 16
14 15
In Steel and Pipes
WE HAVE PERFORATED METALS WITH GOOD PERMEABILITY AND DECORATIVE EFFECTS MAINLY USED FOR DECORATION OF: • ALSO USED AS EXQUISITE DECORATIVE SHEETS FOR BUILDING STAIRCASES, • BALCONIES • ENVIRONMENTAL FRIENDLY OFFICE FURNITURE • AND MORE...
We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
177
© 2010 STEEL AND PIPES, INC.
• DOORS AND WINDOWS • PANELS • ELEVATOR CABINETS • STAND • SHELF - CAN BE USED AS SOUND ABSORPTION WALL MATERIALS FOR THE CEILING AND WALLS IN BUILDING
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HW-20 TORCH FAMILY - 300 AMP • Compact water-cooled design for higher current applications in confined areas • Hard body w/HFCTM (HW-20) provides superior heat and abrasion resistance- available in 2 versions • Economical silicon rubber body (HW-20R) provides resistance to breakage
SPECIFICATIONS: Capacity
240 Amps, 100% duty cycle, ac or dc w/ standard accessories 250 Amps, 100% duty cycle, ac or dc w/ gas lens accessories 300 Amps, 50% duty cycle, ac or dc
Size
OVERALL LENGTH.................................. 6-7/8 in. (175 mm) HANDLE DIAMETER......................................3/4 in. (19 mm) LENGTH OF HEAD............... (short cap) 2-19/64 in. (58 mm) (medium cap) 3-9/32 in. (83 mm) (long cap) 7-5/16 in. (186 mm) DIAMETER OF HEAD......................................3/4 in. (19 mm) WEIGHT (less cable).................................... 3.5 oz. (100 gm) HEAD ANGLE: HW-20............................................ 70 degree COOLING REQUIREMENTS.................1 qt. min. (0.94 l/min)
Torch Assemblies DESCRIPTION
70 DEG. HEAD cable & hose ay., 12-1/2 ft. cable & hose ay., 25 ft.
HW-20 HARD BOD Y
HW-20 SILICON RUBBER
948084 948085
948084R 948085R
Cups, Collets, & Collet Bodies .020
.040
1/16
3/32
1/8
13N20 13N25 45V41
13N21 13N26 45V42
13N22 13N27 45V43
13N23 13N28 45V44
13N24 13N29 45V45
— — — —
CUP NUMBER
4=1/4
5=5/16
6=3/8
7=7/16
8=1/2
10=5/8
HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP
13N08 13N14 53N58
13N09 13N15 53N59
13N10 13N16 53N60
13N11 13N17 53N61
13N12 13N18 —
13N13 13N19 —
ELECTRODE SIZE, IN.
STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY
For selection of special ceramic or sleeved cups, see Accessories following Torches.
Torch Parts & Accessories ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13
© 2010 STEEL AND PIPES, INC.
14 15 16 17
178
PART NO. 948020 948020R 53N06 41V24 41V33 41V35 598882 – – – – – 45V11 45V03 45V04 45V09 45V10 45V07 45V08 53N04 13N42 11N16 85W49
DESCRIPTION BODY, HW-20 w/O-RING (85W49) BODY, HW-20R HANDLE, HW-20 LONG TORCH CAP w/O-RING (181W53) SHORT TORCH CAP w/O-RING (181W53) MEDIUM TORCH CAP w/O-RING (181W53) CUP GASKET COLLET (see table above) COLLET BODY (see table above) GAS CUP (see table above) GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) POWER CABLE ADAPTOR POWER CABLE, 12-1/2 ft. 10 POWER CABLE, 25 ft. GAS HOSE, 12-1/2 ft. 11 GAS HOSE, 25 ft. WATER HOSE, 12-1/2 ft. WATER HOSE, 25 ft. HOSE CLAMP O-RING AY. TOOL (not shown) WATER ADAPTOR (5/8 - 18 LH to 1/4 NPT) (not shown) O-RING
HW-20 TORCH 4 2
5 3
17 1
6 7
12
8
13
9 14 16
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
15
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HW-26 TORCH FAMILY - 220 AMP • Quick release of electrodes • Hard body provides superior heat and abrasion resistance for longest life • Silicon rubber body provides improved resistance to breakage in rough duty • Flexible head models provide added versatility for reaching hard-to-get-at applications
SPECIFICATIONS: Capacity
160 Amps, 100% duty cycle, ac or dc with std. accessories 200 Amps, 100% duty cycle, ac or dc with std. accessories 150 Amps, 50% duty cycle, ac or dc with std. accessories
Size OVERALL LENGTH ............................. 8-7/8 in. (225 mm) HANDLE DIAMETER .......................... 1-7/32 in. (31 mm) LENGTH OF HEAD ............ (short cap) 3-3/4 in. (95 mm) (medium cap) 5-3/8 in. (136 mm) (long cap) 7-3/8 in. (187 mm) DIAMETER OF HEAD ........................... 29/32 in. (23 mm) WEIGHT (less cable) ............................ 7.75 oz. (221 gm) HEAD ANGLE: HW-26 ...................................... 75 degree HW-126F ............................................. variable
Torch Assemblies HW-26 HW-26R HW-26F HARD SILICON FLEX BODY RUBBER HEAD
DESCRIPTION
75 DEG. HEAD, 12-1/2 ft. w/o VALVE 1-pc. cable & hose ay. 17137 2-pc. cable & hose ay. 33857 75 DEG. HEAD, 25 ft. w/o VALVE 1-pc. cable & hose ay. 46V29 2-pc. cable & hose ay. 948127 75 DEG. HEAD w/ROTARY VALVE,12-1/2 ft. 1-pc. cable & hose ay. 17138 2-pc. cable & hose ay. 33858 2-pc. cable & hose ay. twist lock 35858 75 DEG. HEAD w/ROTARY VALVE, 25 ft. 1-pc. cable & hose ay. 46V27 2-pc. cable & hose ay. 948128
17137R —
33848 —
46V29R 33849 948127R — 17138R —
33850 33852
46V27R 33851 948128R 33853
ELECTRODE SIZE, in.
STANDARD COLLET STANDARD COLLET BODY GAS LENS COLLET BODY LG. DIA. GAS LENS COLLET BODY CUP NUMBER
HIGH-IMPACT CUP CERAMIC CUP GAS LENS HIGH-IMPACT CUP LG. DIA. GAS LENS, HIGH-IMPACT CUP GAS LENS CERAMIC CUP
.020
.040
1/16
3/32
1/8
10N21 10N29 45V29 —
10N22 10N30 45V24 —
10N23 10N31 45V25 —
10N24 10N32 45V26 45V64
10N25 10N28 45V27 995795
— — — — —
— — — — —
— — — — —
4=1/4
5=5/16
6=3/8
7=7/16
8=1/2
10=5/8
12=3/4
SHORT
10N50 105Z43 54N18 — 54N35
10N49 105Z42 54N17 — 54N34
10N48 105Z44 54N16 — 54N33
10N47 105Z45 54N15 — 54N32
10N46 08N78 54N14 — 54N31
10N45 08N79 — 53N88 —
10N44 08N80 — 53N87 —
— — 54N19 53N89 —
For selection of special ceramic or sleeved cups, see Accessories following Torches.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
179
© 2010 STEEL AND PIPES, INC.
Cups, Collets, & Collet Bodies
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Torch Parts & Accessories ITEM 1
2 3 4 5 6 7 8 9 10 11 12 13 14 15
PART NO. 45V65 598478 45V65R 598478R 34014 34013 19624 10N15 57Y02 34015 57Y04 54N84 – – – 54N01 54N63 – – 45V62 46V28 46V30 33697 33698 35874 34652
DESCRIPTION BODY, HW-26 BODY, HW-26V w/valve (598279) BODY, HW-26R BODY, HW-26RV w/valve (19622) BODY, HW-26F Flex Head BODY, HW-26FV w/valve (34074) RIBBED HANDLE, HW-26R (for rubber body) HANDLE, HW-26F (for flex body) LONG TORCH CAP w/O-RING (98W18) MEDIUM TORCH CAP w/O-RING (98W18) SHORT TORCH CAP w/O-RING (98W18) HANDLE, HW-26 (for hard body) COLLET (see table above) COLLET BODY (see table above) GAS CUP (see table above) INSULATOR, Req'd for GAS LENS INSULATOR, Req'd for GAS LENS, LG. DIA. 10 GAS LENS COLLET BODY (see table above) GAS LENS CUP (see table above) POWER CABLE ADAPTOR 11 1-pc. POWER CABLE, 12-1/2 ft. 1-pc. POWER CABLE, 25 ft. 2-pc. POWER CABLE & HOSE AY., 12-1/2 ft. 12 2-pc. POWER CABLE & HOSE AY., 25-1/2 ft. 9 2-pc. POWER CABLE & HOSE AY., T.L.12-1/2 ft. 2-pc. POWER CABLE REPAIR KIT (not shown)
HW-26 TORCH 4 3 5
6 2 7 1
14
8
15 13
VISIT OUR SPACIOUS SHOWROOMS!
WITH A LARGE DIVERSITY OF PRODUCTS AND BRANDS
© 2010 STEEL AND PIPES, INC.
OF PICTURERSANCH CAGUAS B
We are your Industrial Supermarket • www.steelandpipes.com 180
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-17A & PT-17AM PLASMARC™ MANUAL CUTTING TORCHES These versatile, easy-to-use 100 amp torches provide superior performance for a full range of manual and mechanized cutting applications. • Excellent cutting capability—cuts up to 1-1/4 in. (31.75 mm); severs up to 1-1/2 in. (38.1 mm); pierces up to 1/2 in. (12.7 mm) • Produce clean, high quality cuts • Patented safety circuit for enhanced operator safety • Operate with shop or cylinder air • Compact, lightweight design for ease of handling • Long life electrodes lower operating costs • Pilot arc starting—even starts on paint • Gouging nozzles available • Intermittent cutting capability for grate or expanded metal applications • Standard and drag shield guards available for operator convenience One-year warranty •
SPECIFICATIONS Cuts up to 1-1/4 in. (31.75 mm); severs up to 1-1/2 in. (38.1 mm); pierces up to 1/2 in. (12.7 mm) Current Capacity ............................. 100 amps @ 100% duty cycle Air Supply .................................. 290 cfh @ 75% psig (140 1/min.) Length of Service Lines .................. 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions PT-17A Overall Length ................................................ 10 in. (254 mm) Length of Head ............................................ 2.87 in. (730 mm) Weight 25 ft....................................................................... 9 lbs. (4 kg) 50 ft.................................................................. 15 lbs. (6.8 kg) PT-17AM Overall Length ...........................................17.25 in. (438 mm) Weight 25 ft.................................................................. 10 lbs. (4.5 kg) 50 ft.................................................................. 16 lbs. (7.3 kg)
CONSOLES PCM-875 & PCM-1125 (w/ adaptor P/N 19500), PCM-150
PT-17A, 75°, 25 ft. (7.6 m) line ............................................ PT-17A, 75°, 50 ft. (15.2 m) line .......................................... PT-17AM, Mechanical, 25 ft. (7.6 m) line ............................ PT-17AM, Mechanical, 50 ft. (15.2 m) line ..........................
19999 20000 20001 20002
Instruction Literature, order number ................................ F-14-441
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
181
© 2010 STEEL AND PIPES, INC.
ORDERING INFORMATION
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
OPTIONAL ACCESSORIES
Contents of PT-17A/17AM Spare Parts Kits
50 amp Spare Parts Kit .......................................................... 20062 70 amp Spare Parts Kit ........................................................... 20063 100 amp Spare Parts Kit ......................................................... 20064 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch .................... 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals, 1-3/4 in. (44.5 mm) 42 in. (106 cm) Radius ............................................ 0558003258 Spatter Shield Use for piercing .................................................................. 20748 75° Plasmit Torch Head Protector For gouging ........................................................................ 20803 Mechanical Plasmit Torch Head Protector For gouging ....................................................................... 20804 Leather Sheath 10 ft. (25.4 cm) length ........................................................ 20812 Heavy Duty Heat Shield .......................................................... 20747 Heat Shield Guard ................................................................... 19990 Drag Heat Shield Guard .......................................................... 19989 Adaptor for PT-17A Handheld Torch to PCM1125 .................... 19500
AMPS Cutting Nozzle 30 60 80 100 Gouging Nozzle 70 100
P/N
DESCRIPTION
Heat Shield Shield Guard, Drag Shield Guard, Std. Cutting Nozzle, .046 Cutting Nozzle, .052 Cutting Nozzle, .057 Cutting Nozzle, .067 Electrode Electrode Adaptor Baffle Tube Shroud Cap Shroud Wrench Pilot Arc Adaptor 70 amp Gouging Nozzle 100 amp Gouging Nozzle
P/N
20747 19989 Type 19990 Type 19915 19916 19917 20056 19918 20053 19114 19498 19499 19129 19497 20426 20427
P/N 20062 50 AMP
P/N 20063 P/N 20064 70 AMP 100 AMP
2 2
2 2
2 2
1
1
1
5 5 1 1 1 1 1 1 -
5 5 5 5 1 1 1 1 1 1 1 -
5 5 5 5 1 1 1 1 1 1 1 1
ORIFICE SIZE
19915 19916 19917 20056
.046 .052 .057 .067
20426 20427
.089 .106
Baffle Tube 19114
Electrode Adaptor 20053
Shroud Cap - 19498
Mechanized Torch Body - 20010 75° Torch Body - 20008 Switch - 18224 Electrode 19918
© 2010 STEEL AND PIPES, INC.
Shield Guard, Drag. - 19989 Shield Guard, Std. - 19990
182
Heat Shield 20747 Shroud -19502
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Switch Band- 19127
Flex Support - 19156
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-20AMX TORCH & PT-21AMX PLASMARC™ MECHANIZED CUTTING TORCHES In conjunction with an ESAB console, the PT-20AMX torch offers the ideal solution for low cost, high performance cutting. 180° in-line mechanical torch Excellent cutting capability Extremely versatile—excellent for thinner materials Equipped with patented safety interlock feature Pilot arc starting—even starts on paint Available with 50 ft. (15.2 m), 25 ft. (7.6 m), *4 ft. (1.2 m) and *17 ft. (5.2 m) torch leads • Compatible with a variety of ESAB consoles • One-year warranty • Drops easily into standard 1-3/8 in. (34.9 mm) torch holders *4 ft. (1.2 m) and 17 ft. (5.2 m) torch leads used on Remote Arc Starter only • • • • • •
SPECIFICATIONS Current Capacity ............................................ 100 amps @ 100 % duty cycle Plasma/Cooling Gas Requirements ..................................... 350 cfh @ 85 psig Length of Service Lines ............................ 4ft. (1.2 m), 17 ft. (5.2 m), 25ft. (7.6 m), 50 ft. (15.2 m) Dimensions Length .......................................................................... 17.5 in. (444 mm) Barrel Diameter ............................................................. 1-3/8 in. (34.9 mm)
CONSOLES PT-20AMX, PCM-875, PCM-1125 (with adaptor 19500), ESP-100 (no adaptor)
ORDERING INFORMATION PT-20AMX for Console Connections Torch with rack, 50 ft. (15.2 m) .............................0558003421 Torch without rack, 50 ft. (15.2 m) .........................0558003422 Torch with rack, 25 ft. (7.6 m) ................................0558003427 Torch without rack, 25 ft. (7.6 m) ...........................0558003426
PT-20AMX Remote Arc Starter Torch without rack, 4 ft. (1.2 m) .............................0558003424 Torch without rack, 17 ft. (5.2 m) ...........................0558003425
PT-21AMX for use with PowerCut ®1250 & 1500
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
183
© 2010 STEEL AND PIPES, INC.
Torch with rack, 50 ft. (15.2 m) ..............................0558003614 Torch without rack 50 ft. (15.2 m) ..........................0558003615 Torch with rack, 25 ft. (7.6 m) ................................0558003616 Torch without rack, 25ft. (7.6 m) ............................0558003617
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Contents of PT-20AMX Spare Parts Kits QUANTITY DESCRIPTION
PART NO.
Heat Shield (70/100 amp) Heat Shield (50 amp) Cutting Nozzle (50 amp) Cutting Nozzle (70 amp) Cutting Nozzle (90 amp) Cutting Nozzle (100 amp) Electrode Electrode Insulator Electrode Holder Assy. Baffle Tube Pilot Arc Adaptor O-Ring Lubricant (1 oz.) Seat/Baffle Wrench 1/16 in. Hex-Key Wrench Tool Box
P/N 21370 50 AMP
P/N 21369 70/80AMP
P/N 0558004271 90 AMP
P/N 21376 100 AMP
2 5 5 1 1 1 1 5 1 1 1 1
2 1 5 5 5 1 1 1 1 5 1 1 1 1
2 1 5 5 5 1 1 1 1 5 1 1 1 1 1
2 1 5 5 5 5 1 1 1 1 5 1 1 1 1
21326 21447 21330 21329 0558004269 21328 21150 21373 21332 21374 19497 488157 17672 21375 93750006 950272
OPTIONAL ACCESSORIES Remote Hand Control Switch 25 ft. (7.6 m) lead
Torch Holder Assembly ........................................................ 16V83 50 amp Spare Parts Kit ........................................................ 21370 70 amp Spare Parts Kit ........................................................ 21369 100 amp Spare Parts Kit ..................................................... 21376 90 amp Spare Parts Kit .............................................. 0558004271
For PT-20AMX .............................................................. 680982 For PT-21AMX ...................................................... 0558003612
Adaptor for PCM-875 and PCM-1125 .................................... 19500
Plasma Flow Measuring Kit
This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ............................... 19765
CUTTING PARAMETERS FOR PT-20/21AMX TORCH ON CARBON STEEL 100 Amp Data, Nozzle P/N 21328, Heat Shield P/N 21326 METAL THICKNESS (IN.)
1/4 1/2 3/4 1 1-1/4 1-1/2
AIR PRESSURE STAND-OFF (PSIG) (IN.)
85 85 85 85 85 85
1/4 1/4 1/4 1/4 5/16 5/16
70 Amp Data, Nozzle P/N 21329, Heat Shield P/N 21326
TRAVEL ARC SPEED VOLTS (IPM)
KERF WIDTH (IN.)
PIERCE TIME (SEC.)
METAL THICKNESS (IN.)
AIR PRESSURE STAND-OFF (PSIG) (IN.)
TRAVEL ARC SPEED VOLTS (IPM)
KERF WIDTH (IN.)
PIERCE TIME (SEC.)
110 120 125 130 140 145
1/8 1/8 1/8 1/8 5/32 3/16
0.1 0.3 1.0 2.75 N.R. N.R.
1/8 1/4 1/2 3/4 1 1-1/4
75 75 85 85 85 85
95 100 115 130 140 155
3/32 3/32 3/32 1/8 5/32 5/32
0.1 0.2 0.6 2.25 N.R. N.R.
100 45 27 15 10 7
3/16 3/16 1/4 1/4 5/16 5/16
40 & 50 Amp Data, Nozzle P/N 21330, Heat Shield P/N 21447
© 2010 STEEL AND PIPES, INC.
METAL THICKNESS (IN.)
1/16 1/8 3/16 1/4 3/8 1/2
184
ARC AIR CURRENT PRESSURE (AMPS) (PSIG)
STAND-OFF (IN.)
ARC VOLTS
TRAVEL SPEED (IPM)
KERF WIDTH (IN.)
PIERCE TIME (SEC.)
40 40 50 50 50 50
1/8 1/8 1/8 3/16 1/4 5/16
110 110 110 120 130 150
150 100 100 65 40 18
3/64 3/64 1/16 5/64 5/64 3/32
0.25 0.25 0.25 0.25 0.25 1.0
75 75 85 85 85 85
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
190 80 30 15 7 5
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Electrode - 21150
Baffle Tube - 21374
Heat Shield 70/100 amp - 21326 30/50 amp - 21447
AMPS P/N ORIFICE SIZE Cutting Nozzle 30 37329 .032 50 21330 .042 70 21329 .052 90 0558004269 .056 100 21328 .059
O-Ring - 488157 Insulator - 21373 Electrode Adaptor Assembly - 21332
Torch Body Ass’y - 21359
In Steel and Pipes
WE HAVE THE BRANDS YOU ARE LOOKING FOR: ™
SYSTEMA INOX
®
CHAMBERLAIN
®
We are your Industrial Supermarket • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
185
© 2010 STEEL AND PIPES, INC.
KincoPro ™
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-27 PLASMARC™ MANUAL CUTTING TORCH Designed for superior cutting performance and ease of handling, the PT-27 produces clean, exceptionally high quality cuts. • Most compact 80 amp torch on the market • Excellent cutting capacity—cuts up to 1 in. (25.4 mm); severs up to 1-1/4 in. (31.75 mm) • Uses shop air, cylinder air or nitrogen for superior versatility • Pilot arc starting—even starts through paint • Choice of 25 ft. (7.6 m) or 50 ft. (15.2 m) line length • Perfect electrode centering • Intermittent cutting capability for grate or expanded metal applications • Use with three cutting nozzle sizes for exceptional versatility • Improved spring-loaded seat eliminates head burn-out • One-year warranty
SPECIFICATIONS
Cuts up to 1 in. (25.4 mm); severs up to 1-1/4 in. (31.75 mm) Current Capacity ................................ 80 amps @ 100% duty cycle Air Supply ................................ 320 cfh @ 65 - 75 psig (150 1/min) Length of Service Lines ................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ................................................. 7.3 in. (185 mm) Length of Head ................................................ 3.06 in. (78 mm)
CONSOLES PCM-875, PCM-1125
PT-27 Cutting Performance
ORDERING INFORMATION All torch assemblies and replacement heads are supplied with the seat installed. PT-27, 75°, 25 ft. (7.6 m) line with ring terminal ................... 21661 PT-27, 75°, 50 ft. (15.2 m) line with ring terminal ................. 21662 PT-27, 75°, 25 ft. (7.6 m) European ...................................... 35548 For units manufactured prior to 4/31//95 (that have 2 twist lock plugs for torch hook-up) order: PT-27, 75°, 25 ft. (7.6 m) line with plug ................................ 21620 PT-27, 75°, 50 ft. (15.2 m) line with plug .............................. 21621
70
60
© 2010 STEEL AND PIPES, INC.
35
186
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
50-70 amp Spare Parts Kit ......................................................... 21623 80 amp Spare Parts Kit ............................................................... 21624 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ............................ 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals Deluxe: 1-3/4” - 42” (44.5 mm - 106 cm) Radius ........... 0558003258 Torch Guide Basic: 1-3/4” - 28” (44.5 mm - 71 cm) Radius .............. 0558002675 Stand-off Guide For proper stand-off distance when drag cutting ....................... 21420 90° Adaptor for PT-27 Torch To convert your 75° torch to a 90° torch .................................. 000222 Gouging Nozzle For gouging with PT-27 torch ...................................................... 35442 Gouging Shield To protect heat shield from spatter ............................................. 35443
Contents of PT-27 Spare Parts Kits DESCRIPTION
P/N
Heat Shield 50-70 amp Nozzle 80 amp Nozzle Swirl Baffle Electrode Fuse, 15 amp, 600 vdc Stand-off Guide Heat Shield, Long
21616 33369 33418 33367 33366XL 952137 21420 35547
P/N 21623 P/N 21624 50/70 A XT 80 A XT PCM-875 PCM-1125
2 4 1 3 1 1 -
P/N 35776 50/70 A PCM-875CE
2 4 1 3 1 1 -
4 1 3 4 1 2
*Seat - 0558003032
75° Torch Body - 21610
Electrode - 33366XL
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
OPTIONAL ACCESSORIES
Switch - 18224
Swirl Baffle - 33367
Switch Band- 33400 O-Ring - 85W51 Flex Support - 21218 Heat Shield - 21616 Long “CE” Heat Shield - 35547
Note: “CE” Items are used outside North America
P/N 33368 33369 33418 35442
ORIFICE SIZE .037* .047 .052 .093
*with feet for dragging on workpiece
IMPROVED
SEAT 0558003032 *NOTE: If your PT-27 torch still has the old style Valve Pin, you will need to retrofit the torch to the improved seat design.
NOTE: New and improved PT-27 spring-loaded seat dramatically im proves the torch head life by making the PT-27 resistant to damage due to improperly tightened consumables. This seat will not correct a torch head that is already burned out, but it will prevent torch head burnout on functioning torches.
ORDER: Seat and Installation Instructions (form 15-723) ..... P/N 0558003032 Installation Tool ....................................................... P/N 0558003027
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
187
© 2010 STEEL AND PIPES, INC.
Installation Tool 0558003027
AMPS Cutting Nozzle 30 50-70 80 Gouging Nozzle
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-31XL & PT-31XLPC PLASMARC™ TORCHES Designed for superior operator comfort, ESAB’s PT-31XL and PT-31XLPC are the most compact 50 amp torches on the market.
• • • • • • •
Excellent cutting capability—manually cuts up to 3/4 in. (19 mm); severs up to 1 in. (25.4 mm) New, durable torch cable prevents snagging on fixtures and materials Equipped with patented safety interlock feature Uses shop air, cylinder air or nitrogen for superior versatility High frequency starting—even starts through paint Uses patented “XT” consumables One-year warranty
PT-31XL
SPECIFICATIONS Cuts 3/4 in.; severs up to 1 in. Current Capacity ................................ 50 amps @ 100% duty cycle Air Supply ........................................ 275 cfh @ 75 psig (130 l/min.) Length of Service Lines ................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ............................................... 5.25 in. (133 mm) Length of Head ................................................ 2.25 in. (57 mm)
PT-31XLPC
CONSOLES
HandyPlasma ® 380, HandyPlasma® 550, and PowerCut ® 650
TORCH ORDERING INFORMATION HandyPlasma ® 380
PT-31XL, 75° head, 15 ft. (4.6 m) line ......................... 0558004482
HandyPlasma ® 550
PT-31XL, 75° head, 25 ft. (7.6 m) line ......................... 0558004498
PowerCut ® 650
PT-31XLPC, 75° head, 25 ft. (7.6 m) line .................... 0558003183 PT-31XLPC, 75° head, 50 ft. (15.2 m) line .................. 0558005334 Above torches are assembled with “XT” consumables PT-31XLPC, 75° head, 25 ft. (7.6 m) “CE” .................. 0558005393
© 2010 STEEL AND PIPES, INC.
Note: “CE” Items are used outside North America Instruction Manual, order number (PT-31XL) ................... F-14-246 Sales Literature, order number (PT-31XL) ..................... PAC-21039 Instruction Manual, order number (PT-31XLPC) ............... F-15-724 Sales Literature, order number (PT-31XLPC) ................ PAC-21090
188
OPTIONAL ACCESSORIES 30/40 amp Standard Spare Parts Kit (High Performance) ........ 0558003301* * HandyPlasma ® 380, HandyPlasma ® 550, and PowerCut ® 650
Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ...................................... 19765
Torch Guide Kits The Deluxe kit comes in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals Deluxe: 1-3/4 in. (44.5 mm) - 42 in. (106 cm) Radius .............. 0558003258 Basic: 1-3/4 in. (44.5 mm) - 28 in. (71 cm) Radius .................. 0558002675 NOTE: XT nozzles have extended shape.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
• Most compact 90 amp torch on the market • New, durable torch cable prevents snagging on fixtures and materials • Excellent cutting capacity —cuts up to 1-1/2 in. (38 mm) • Uses shop air, cylinder air or nitrogen for superior versatility Pilot arc starting —even starts through paint • Choice of 25 ft. (7.6 m) or 50 ft. (15.2 m) line length • • Excellent consumable life • Parts in place design • Patented torch and safety circuit • Exclusive 40 amp Drag Nozzle • One-year warranty
SPECIFICATIONS
Cuts up to 1-1/2 in. (38 mm) Current Capacity ........................................ 90 amps @ 100% duty cycle Air Supply ................ 350 cfh @ 75-80 psig (165 l/min @ 5.2 - 5.5 bar) Length of Service Lines .......................... 25 ft. (7.6 m) or 50 ft. (15.2 m) Dimensions Overall Length ...................................................... 8.2 in. (208 mm) Length of Head ...................................................... 3.0 in. (76 mm)
CONSOLES
PowerCut ®875, PowerCut ®1125, PowerCut ®1250, and PowerCut ®1500
ORDERING INFORMATION PT-32EH, 90°, 25 ft. (7.6 m) line ............................... 0558003548 PT-32EH, 90°, 50 ft. (15.2 m) line ............................. 0558003549 Torches and torch body assemblies are supplied without electrode, nozzle, heat shield and valve pin. Order individual components shown with PT-32EH parts breakdown following.
PT-32EH CUTTING SPEEDS OUTPUT CURRENT 60, 70 & 90AMPS w/AIR @ 75psi (5.2bar)
OPTIONAL ACCESSORIES 50/70 amp Spare Parts Kit (PC-875 “CE”) ................... 0558004949 50/70 amp Spare Parts Kit (PC-875/1125) ................. 0558002822 70 amp Spare Parts Kit (PC-1250) ............................... 0558003508 70 amp Spare Parts Kit (PC-1250) “CE” ...................... 0558003560 90 amp Spare Parts Kit (PC-1500) .......................... 0558003062 90 amp Spare Parts Kit (PC-1500) “CE” ...................... 0558003557 Plasma Flow Measuring Kit This valuable troubleshooting tool allows measurement of the actual plasma gas flow through the torch ....................... 19765 Torch Guide Kit This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals. Deluxe: 1-3/4 in. (44.5 mm) - 42 in. (106 cm) Radius 0558003258 Basic: 1-3/4 in. (44.5 mm) - 28 in. (71 cm) Radius 0558002675 .. Stand-off Guide For proper stand-off distance when drag cutting ........... 0558002393 40 amp Drag Nozzle ................................................... 0558002908 Gouging Nozzle .......................................................... 0558003089 Heat Shield Gouging ................................................. 0558003090 Heat Shield Long “CE” .............................................. 0558003110 Drag Heat Shield Metal feet built into heat shield allows accurate standoff distance for drag cutting ........................................... 0558003374 Heavy Duty Drag Heat Shield Suitable for piercing and heavy industrial use ......... 0558004206
Instruction Literature, PT-32 .............................................. F-15-440 Instruction Literature, PT-32EH ......................................... F-15-747 Sales Literature, order number (PT-32EH) ..................... PAC-21091
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
189
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
Designed for superior cutting performance and ease of handling, the PT-32EH patented torch produces clean, exceptionally high quality cuts. The new ergonomic handle offers dual-switch capability, extra comfort and a non-slip grip.
© 2010 STEEL AND PIPES, INC.
PT-32EH PLASMARC™ MANUAL CUTTING TORCH
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-32EH Torch Head - 0558003412 O-Ring - 85W51 (Supplied with head)
Drag Heat Shield 0558003374 (Optional)
Valve Pin 0558001959 Electrode 0558001969
Heavy Duty Drag Heat Shield 0558004206 (Optional)
Heat Shield 0558001957 Long Heat Shield “CE” 0558003110
Nozzle 40 AMP - 0558002908 (Drag Cutting)* 50/70 AMP - 0558002618 (PC-875, PC-1125, & PC-1250) 90 AMP - 0558002837 (PC-1500 Only) *PC-875, PC-1125, 1250, & PC-1500
Note: “CE” Items are used outside North America
Contents of PT-32EH Spare Parts Kits PC-875/1125 P/N 0558002822 50/70 AMP
Description Part Number Qty Heat Shield Long 0558003110 Heat Shield 0558001957 2 50/70 amp Nozzle 0558002618 4 90 amp Nozzle 0558002837 40 amp drag Nozzle 0558002908 1 Electrode 0558001969 3 Valve Pin 0558001959 1 Fuse 2 amp, 600vdc 0558003075 Stand-off Guide 0558002393 1 Wrench 19129 1 Lubricant 17672 1 Note: “CE” Items are used outside North America
PC-875 (CE)
PC-1250
P/N 0558004949 P/N 0558003508 70 AMP 50/70 AMP
Qty 2 4 1 3 1 1 1 1
Qty. 2 4 1 3 1 1 1 1 1
PC-1250 (CE) P/N 0558003560 70 AMP 400V
PC-1500
PC-1500 (CE)
P/N 0558003062 90 AMP
Qty. 2 4 1 3 1 1 1 1 1
Qty. 2 4 1 3 1 1 1 1 1
P/N 0558003557 90 AMP 400V
Qty. 2 4 1 3 1 1 1 1 1
Acuerdate... © 2010 STEEL AND PIPES, INC.
SI AÚN NO ERES MIEMBRO DEL CLUB DE HERREROS ERO SOLICITA TU APLICACIÓN HOY CLUB DEL HERR 5 %* de descuento
AHORA EN PRODUCTOS:
en todos nuestros
CHAMBERLAIN
®
Nombre
190
_________
_________ _Fecha Exp._____
____________
a entos no aplican o negra r el descuento. Descu para poder aplicaa 1x1 y 1x2 de ningún grosor seaaplican a nto de la compra Descuentos de construcción, tuberí presentada al mome o, Visa, MC o ATH. aviso. Ciertas *La tarjeta debe serial, “metal deck”, “purlins”, varilla tiene que ser en efectiv descuentos sin previo mercancía en especque el descuento sea válido la ventael derecho de cancelar estos . galvanizada. Parada en la sucursal. Nos reservamos dorso de esta tarjeta mercancía recoji n, ver términos y condiciones al restricciones aplica
Socio#_______
®
_________
_______________
____________ _______________
CHAMBERLAIN
productos:
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PT-38 PLASMARC™ CUTTING TORCH
TORCHE SPECIFICATIONS: Cuts .................................................................................................................................................. 1-1/2 in. (38 mm); severs 1-3/4 in. (45 mm) Current Capacity .................................................................................................................................................... 90 amps @ 100% duty cycle Nominal Flow Rate ........................................................................................................................... 400 cfh @ 80 psig (189 l/min @ 5.5 bar) Length of Service Lines ....................................................................................................................................... 25 ft (7.6 m) or 50 ft (15.2 m) Dimensions Overall Length ................................................................................................................................................................................ 8.2 in. (208 mm) Length of Head ................................................................................................................................................................................. 3.0 in. (76 mm) PT-38 Torch, 25' (7.6 m) ....................................................................................................................................................................... 0558006786 PT-38 Torch, 50' (15.2 m) ..................................................................................................................................................................... 0558006787 Torches and torch body assemblies are supplied without gas baffle, electrode, nozzle, and retaining/shield cup. Order com-plete spare parts kits or individual components shown in PT-38 Spare Parts Kits or Consumables Breakdown section.
COMPATIBLE ESAB CONSOLES: Powercut-1300:
208-230/460 V Console ............................................. 0558007220 208-230/460 V Console BL ................................... 0558007220F 400 V CE Console ........................................................ 0558007224 400 V Console ............................................................... 0558007634 460 V Console ............................................................... 0558008320 575 V Console BL ........................................................ 0558007227
Powercut-1600:
208-230/460 V Console ............................................. 0558007230 208-230/460 V Console BL ................................... 0558007230F 400 V CE Console ........................................................ 0558007234 400 V Console ............................................................... 0558007636 460 V Console ............................................................... 0558008323 575 V Console BL ........................................................ 0558007237 208/230 V Console ...................................................... 0558008120 208/230 V Console BL .............................................. 0558008120F 230 V CE Console ......................................................... 0558008123 400 V CE Console ......................................................... 0558008135 400 V Console ................................................................ 0558008133 460 V Console ................................................................ 0558008127 575 V Console BL .......................................................... 0558008131
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
191
© 2010 STEEL AND PIPES, INC.
Powercut-900:
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
OPTIONAL ACCESSORIES: Gas Flow Measuring Kit .................................... p/n 19765 ("CE" units - 0558000739) Torch Guide Kit:
This complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals. Deluxe, 1-3/4" - 42" (44.5 mm - 106 cm) Radius ............................................................... p/n 0558003258 Basic, 1-3/4” - 28” (44.5 mm - 71 cm) Radius .................................................................. p/n 0558002675
Powercut-1300/1600
Stand-off Guide Assembly 90 Amp ................................................................................... p/n 0558006614 Use to mantain constant stand-off distance.
Gouging 90 Amp: Gouging Nozzle 90 Amp ........................................................................................ p/n 0558007681 Gouging Heat Shield Assembly 90 Amp .......................................................... p/n 0558008186 *Note: Must use 90/100 Amp Gas Baffle ....................................................... p/n 0558004870
• • •
Powercut-900
Stand-off Guide Assembly 60 Amp ................................................................................... p/n 0558008592 Use to mantain constant stand-off distance.
Gouging 60 Amp: • •
Gouging Nozzle 60 Amp ....................................................................................... p/n 0558008588 Gouging Heat Shield Assembly 60 Amp .......................................................... p/n 0558008591
SPARE PARTS KITS: PT-38 Spare Parts Kits
© 2010 STEEL AND PIPES, INC.
0558007640 90 AMP PC-1600 CE
192
0558007639 90 AMP PC-1600
0558007642 70 AMP PC-1300 CE
0558007641 70 AMP PC-1300
0558008419 60 AMP PC-900 CE
0558008418 60 AMP PC-900
PART NUMBER
DESCRIPTION
3
3
3
3
3
3
0558005220
ELECTRODE
1
1
1
1
1
1
0558005217
GAS BAFFLE 30-70A
1
1
-
-
-
-
0558004870
GAS BAFFLE 90/100A
-
-
-
-
3
3
0558008417
NOZZLE 60 AMP
-
-
4
4
-
-
0558005219
NOZZLE 70 AMP
4
4
-
-
-
-
0558007680
NOZZLE 90 AMP
1
1
1
1
-
-
0558007682
NOZZLE DRAG 40 AMP
-
1
-
1
-
1
0558007549
RETAINING / SHIELD CUP
1
-
1
-
1
-
0558008094
RETAINING / SHIELD CUP LONG
3
3
3
3
3
3
2064062
O-RING .301ID .070W Nitrile
1
1
1
1
1
1
17672
GREASE SILICON DOW DC-111 (1/4 oz)
1
1
1
1
1
1
0558001379
FUSE MIDGET SLO-BLO 2A 600V
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
0558008094 0558007549
40A
0558008094
0558005219 0558007680 0558007682
0558006613
80 PSI 5.5 BAR
0558005220 0558005220 0558005220
0558006611
70A
0558007549
0558005219 0558006614
40A
0558007549
0558007682
0558006601
0558005217
O-RING JOINT TORIQUE 85W51 GREASE 17672
0558005220
0558006601
0558006614
0558005217
PT-38 O-RING 2064062
GOUGING 0558006611 0558007681 0558004870
0558001379
0558005220 0558008186 0558005217
GUIDE DE HAUTEUR 0558006613 0558006611
80 PSI 5.5 BAR
0558005217 0558004870
P/N 0558954137-C 8/08
COUPAGE
70A 90A
GREASE GRAIS SE 17672
GOUGING GOUGEAGE 0558006611 0558007681 0558004870
O-RING JOINT TORIQUE 2064062
FUSIBLE 2A 600V 0558001379
0558008186
*
90A
PT-38 CE
CUTTING
0558008094
0558007680
0558005220
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CONSUMABLES BREAKDOWN PC -1300/1600:
0558004870
0558008094
0558005219
0558005220
0558005217
40A
0558008094
0558007682
0558005220
0558005217
0558006613
80 PSI 5.5 BAR
0558006611
0558006601
GREASE 17672
GOUGING 0558006611 0558007681 0558004870
O-RING 2064062
0558001379 0558006614
0558008186
*
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
193
© 2010 STEEL AND PIPES, INC.
70A
P/N 0558954137-C 8/08
O-RING 85W51
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CONSUMABLES BREAKDOWN PC-900:
PT-38
COUPAGE
60A
0558007549
40A
0558007549
0558008417
0558005220
0558005217 O-RING JOINT TORIQUE 85W51
0558007682
0558005220
0558005217
GREASE GRAIS SE 17672
GUIDE DE HAUTEUR 0558008590 0558006611
80 PSI 5.5 BAR
60A
0558006602
0558008592
GOUGING GOUGEAGE 0558006611 0558008588 0558005217
FUSIBLE 2A 600V 0558001379
0558008591
CUTTING
0558008417
0558008094
0558005220
O-RING JOINT TORIQUE 2064062
0558005217
PT-38 CE O-RING 85W51
0558007682 0558008417
COUPAGE
0558005220 0558005220
0558005217 0558005217 O-RING JOINT TORIQUE 85W51 GREASE 17672 GOUGING
0558008590
80 PSI 5.5 BAR
© 2010 STEEL AND PIPES, INC.
40A
194
0558007549
0558006611
0558008592 0558007682
0558006602
0558006611
0558005220 0558008591
PT-38 O-RING 2064062
0558008588 0558005217
0558005217
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
0558001379
P/N 0558954166-A 1/09
0558008094 40A 60A 0558007549
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
CONTENTS OF SPARE PARTS KIT (HP-380, HP-550, PC-650) DESCRIPTION
P/N
Heat Shield Long Heat Shield 30A High Perf. Nozzle 35/40A Extd. Life Nozzle Swirl Baffle Electrode Lubricant (.25 oz)
PT-31XL P/N 0558003301 30/40A
PT-31XL P/N 21980 35/40A S/P
1 1 3 0 1 2 1
1 1 0 3 1 2 1
36284 20282 20860 21008 20463 20862 17672
DESCRIPTION
P/N
Heat “CE” Shield Long 30 A High Performance Nozzle Swirl Baffle Electrode Lubricant (.25 oz)
PT31XLCE P/N 0558005392 30/40A “CE”
36284 20860 20463 20862 17672
1 3 1 2 1
O-ring - 950790 Torch Body - 20072 (includes Seat - 19679 and O-ring - 950790)
Plunger - 20324
Switch - 18224
Electrode - 20862
Switch Band - 18207 Swirl Baffle - 20463
Seat - 19679
Heat Shield - 20282 Long “CE” Heat Shield - 36284 AMPS Cutting Nozzle 30/40 35/40 50
P/N
ORIFICE SIZE
20860 21008 20861
.037 - High Performance .042 - Extended Life .046 - For use on 50 amp machines only
Flex Support - 18225
Note: “CE” Items are used outside North America
REMEMBER... • ELECTRODES & TIG RODS • GAS WELDING & CUTTING SETS TORCHES, REGULATORS, TIPS, ETC. • WELDING CABLES & ACCESSORIES • TIG TORCHES & ACCESSORIES • PURGING PAPER, TAPES, ETC.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
195
© 2010 STEEL AND PIPES, INC.
WE HAVE WHAT YOU NEED:
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PTW-20 Premium Water-Cooled Model Light and easy to use, these torches give you the power of maximum versatility and maneuverability. A molded, knurled handle gives you a fast grip so you can focus on the weld. "F" model torches feature flexible heads to increase your comfort and get you into tighter spaces. "V" model torches provide a convenient gas control valve to change shielding gas settings at the torch. Available with several amperage ratings in both air-cooled and water-cooled versions. Whether you are an occasional TIG welder, fabrication job shop or production welder, one of the Pro-Torch TIG torches is right for you. • Choose between a wide range of both air-cooled and watercooled torches in various amperage ranges to meet the performance needs of the professional. • Select "F" model torches feature flexible heads for significantly greater comfort and access to tight spaces. • Select "V" model torches have a convenient gas control valve on the torch to quickly and easily control the shielding gas flow when a gas solenoid valve is not "built-in" the power source. • Select models available with new Ultra-Flex™ Cables for ultimate comfort and maneuverability. • Comfortable knurled handle for a non-slip sure grip for precise control. • Molded lip/ridge on the torch handle for easy connecting of a zippered cable cover. Allows cable cover to be securely attached to torch handle. • All Pro-Torch TIG torches are made from the highest quality materials to assure high performance and long life. • One-year Lincoln warranty on torch.
PHYSICAL SPECIFICATIONS
Weight:6 lbs. (2.7 kgs. ) Dimensions (in) H x W x D : 2 x 13 x 13 Dimensions (mm) H x W x D : 50.8 x 330.2 x 330.2
PROCESSES
© 2010 STEEL AND PIPES, INC.
TIG
MODEL PTW-20
196
RATED AMPERAGE 250 250
TUNGSTEN RANGE IN.(MM) .020-1/8 (0.5-3.2)
LENGTH FT.(M) 12.5 (3.8) 25.0 (7.6)
NUMBER OFCABLES 3 3
PRODUCT NUMBER K1784-3 K1784-4
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
PART NO.
INDUSTRY REF. NO.
DESCRIPTION
S IZE IN. (MM)
1 1 1 1 1 1 1 1 1 1
KP2035-4B1 KP2029-3B1 KP2029-4B1 KP2029-5B1 KP2031-3B1 KP2031-4B1 KP2031-5B1 KP2017-2B1 KP2017-3B1 KP2017-4B1
41V24 13N22 13N23 13N24 13N27 13N28 13N29 13N09 13N10 13N11
Back Cap Collet Collet Collet Collet Body Collet Body Collet Body Alumina Nozzle Alumina Nozzle Alumina Nozzle
Long 1/16 (1.6) 3/32 (2.4) 1/8 (3.2) 1/16 (1.6) 3/32 (2.4) 1/8 (3.2) 5/16 (8.0) 3/8 (10.0) 7/16 (11.0)
1 1 1
Tungsten Electrode, 2% Thoriated 1/16"x7.0" (1.6 x 178mm) Tungsten Electrode, 2% Thoriated 3/32"x7.0" (2.4 x 178mm) Tungsten Electrode, 2% Thoriated 1/8"x7.0" (3.2 x 178mm)
QTY.
Parts shown are not actual size.
KP2414-1 GAS LENS PARTS KIT (FOR PTA-9 OR PTW-20 SERIES TORCHES) PART NO.
INDUSTRY REF. NO.
DESCRIPTION
1 1 1 1 1 1 1 1 1 1
KP2035-4B1 KP2029-2B1 KP2029-3B1 KP2029-4B1 KP2033-2B1 KP2033-3B1 KP2033-4B1 KP2019-2B1 KP2019-3B1 KP2019-4B1
41V24 13N21 13N22 13N23 45V42 45V43 45V44 53N59 53N60 53N61
Back Cap Collet Collet Collet Gas Lens Collet Body Gas Lens Collet Body Gas Lens Collet Body Gas Lens Nozzle Gas Lens Nozzle Gas Lens Nozzle
1 1 1
Tungsten Electrode, 2% Thoriated .040 Tungsten Electrode, 2% Thoriated 1/16” Tungsten Electrode, 2% Thoriated 3/32”
QTY.
Parts shown are not actual size.
S IZE IN. (MM) Long .040 1/16” 3/32” .040 1/16” 3/32” #5 #6 #7
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
KP510 (FOR PTW-20 SERIES TORCHES)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
197
© 2010 STEEL AND PIPES, INC.
We Fabricate Anything in Steel, Stainless Steel or Aluminum
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
PUSH-PULL GUNS
PANTHER™ GOOSENECK-STYLE AIR-COOLED OR WATER-COOLED PUSH-PULL GUNS Select Panther™ gooseneck-style guns for advanced aluminum welding applications. Feature dual-driven rolls, full-length conduit, innovative ball & socket strain relief and precise multi-turn WFS control. Air-cooled rated 300A @ 60% duty cycle w/Argon. Water-cooled rated 400A @100% duty-cycle w/Argon.
Cougar™ push-pull guns are intended for those operators who prefer an upright pistol-grip design for aluminum welding fabrication or production. Feature Sure-Grip™ handle, integrated strain relief and multi-turn potentiometer. Rated 300A @ 60% duty cycle w/Argon.
Order: K2874-1 for Air Cooled, 15 ft. (4.5 m) K2874-2 for Air Cooled, 25 ft. (7.6 m) K2874-3 for Air Cooled, 50 ft. (15.2 m) K2875-2 for Water Cooled, 25 ft. (7.6 m) PRODUCT NAME Panther™ Air Cooled Panther™ Air Cooled Panther™ Air Cooled Panther™ Water Cooled Cougar™ Air Cooled Cougar™ Air Cooled
PRODUCT NUMBER K2874-1 K2874-2 K2874-3 K2875-2 K2704-2 K2704-3
COUGAR™ PISTOL-GRIP AIR-COOLED PUSH-PULL GUNS
Order: K2704-2 for Air Cooled, 25 ft. (7.6 m) K2704-3 for Air Cooled, 50 ft. (15.2 m)
AMPERAGE RATING Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 400A @ 100% DutyCycle Argon: 300A @ 60% DutyCycle Argon: 300A @ 60% DutyCycle
WIRE DIAMETER RANGE IN. (MM) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6) .035 - 1/16 (0.9 - 1.6)
INNERSHIELD® GUNS
© 2010 STEEL AND PIPES, INC.
(FLUX-CORED SELF-SHIELDED)
K126-1 - 10ft. K126-2 - 15ft.
Rated 350 amps. Use .062-3/32 in. (1.6-2.8 mm) diameter wires. Choose from 10 or 15 ft. (3 or 4.5 m) cable lengths.
198
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
CABLE LENGTH FT. (M) 15 (4.5) 25 (7.6) 50 (15.2) 25 (7.6) 25 (7.6) 50 (15.2)
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS
T.SAB730
ANGLE GRINDERS - SAB 730 PRODUCT ADVANTAGES • Protection guard • Auxiliary handle • Serivce Key
T.TV509
ABRASIVE DISC CHOP SAW - TV 509 PRODUCT ADVANTAGES • Powerful • Precise • Strong structure • Ergonomic handle • Bevel cut 0°-45° STANDARD EQUIPMENT • 1 Abrasive disc for metal • Service key
T.SA21-180
ANGLE GRINDERS - SA 21-180 PRODUCT ADVANTAGES • Lightweight and versatile • Particularly suitable for workshops • 3 positions of the side handle
PERCUSSION DRILLS - TM 710 AK PRODUCT ADVANTAGES • Self-locking chuck with safety lock • Reversible • Electronic • Percussion STANDARD EQUIPMENT • Auxiliary handle with depth regulation • Carry case
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
199
© 2010 STEEL AND PIPES, INC.
T.TM710AK
STANDARD EQUIPMENT • Protection guard • Auxiliary handle • Serivce Key
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS
T.D21002
3/8" VSR DRILL-D21002
T.DWD110K
• All ball-bearing construction provides greater durability and longer tool life • Contoured textured handle provides better gripping surface and reduces user fatigue • Glass-filled nylon housing is durable, impact resistant and provides lower maintenance cost • Belt clip conveniently holds tool and frees user's hands for other work
3/8" (10MM) VSR PISTOL GRIP DRILL KIT WITH KEYLESS CHUCK
SPECIFICATIONS:
SPECIFICATIONS
CHUCK SIZE KEYLESS CHUCK AMPS NO LOAD SPEED MAX WATTS OUT CAPACITY IN WOOD (SPADE BIT) CAPACITY IN WOOD (HOLE SAW) CAPACITY IN STEEL (TWIST BIT) CAPACITY IN WOOD (SELF-FEED) CAPACITY IN WOOD (AUGER BIT) CAPACITY IN STEEL (HOLE SAW) GEAR REDUCTION HANDLE STYLE ANTI-SLIP GRIP ANTI-LOCK CONTROL SPINDLE LOCK TOOL WEIGHT SHIPPING WEIGHT CLUTCH
3/8" KEYED 6.0AMPS 0-2,500RPM 480W 1" 1-1/8" 3/8" N/A" N/A" N/A" SINGLE PISTOL GRIP DESIGN NO N/A 3.2LBS 3.65LBS
• 7.0 Amp motor delivers high performance in heavy-duty applications • 3/8" ratcheting keyless chuck for greater bit retention • 0-2,500 RPM, VSR trigger for versatility in drilling and fastening applications • Soft grip handle design offers increased gripping surface and comfort • All ball-bearing construction provides greater durability and longer tool life CHUCK SIZE KEYLESS CHUCK AMPS NO LOAD SPEED MAX WATTS OUT CAPACITY IN WOOD (SPADE BIT) CAPACITY IN WOOD (HOLE SAW) CAPACITY IN STEEL (TWIST BIT) CAPACITY IN WOOD (SELF-FEED) CAPACITY IN WOOD (AUGER BIT) CAPACITY IN STEEL (HOLE SAW) GEAR REDUCTION HANDLE STYLE ANTI-SLIP GRIP ANTI-LOCK CONTROL SPINDLE LOCK TOOL WEIGHT SHIPPING WEIGHT CLUTCH
3/8" YES 7.0AMPS 0-2,500RPM 650W 1" 1-1/8" 3/8" N/A" N/A" N/A" SINGLE PISTOL GRIP DESIGN YES NO N/A 4.1LBS 6.4LBS
T.D25213K
© 2010 STEEL AND PIPES, INC.
1" D-HANDLE THREE MODE SDS HAMMER-D25213K • 2.5 ft-lbs of impact energy provide fast drilling and powerful chipping • 8.0 Amp motor provides high performance and overload protection • Reverse feature assists in the removal of fasteners • Variable speed allows for precise hole placement on work surface • Factory-set clutch reduces sudden, high torque reactions if bit jams • 360° side handle adjusts easily for preference or use in tight spaces
200
SPECIFICATIONS
OPTIMAL CONCRETE DRILLING AMPS IMPACT ENERGY NO LOAD SPEED BLOWS/MIN CHIPPING CLUTCH WOOD/STEEL DRILLING SWITCH TOOL LENGTH TOOL WEIGHT
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
5/32" - 5/8" 8.0AMPS 2.5FT-LBS 0-1,150RPM 0-4,300BPM YES YES WITH ADAPTOR" 16.6" 6.1LBS
T.DW304PK
10.0 AMP RECIPROCATING SAW KIT-DW304PK T.D21710
D21710K -PERCUSSION DRILL
• Variable speed control with forward and reverse mode to suit different materials, Dust sealed switch for added durability • Compact and light weight to enhance user comfort, Jampot construction design for added durability and ease of service SPECIFICATIONS:
CHUCK CAPACITY: POWER INPUT: POWER OUTPUT: MAX TORQUE: NO LOAD SPEED: MAX. DRILLING CAPACITY [WOOD]: MAX. DRILLING CAPACITY [STEEL]: MAX. DRILLING CAPACITY [CONCRETE]: SPINDLE THREAD: WEIGHT: LENGTH MM: HEIGHT: VOLTAGE:
13 MM 600 WATTS 300 WATTS 12 NM 0-2600 RPM 25 MM 13 MM 16 MM 1/2IN X 20 U.N.F 1.8 KG 280 MM 185 MM 240V
• 4-position blade clamp allows for flush cutting and increased versatility • Powerful 10.0 Amp motor designed for heavy-duty applications • Keyless lever-action blade clamp for quick and easy blade changes • 0-2,800 strokes per minute and 1-1/8" stroke length deliver fast cutting • Variable speed trigger allows user to instantly control speed from 0 to dialed setting SPECIFICATIONS
AMPS STROKES/MIN STROKE LENGTH KEYLESS BLADE CLAMP 4 POSITION BLADE CLAMP ADJUSTABLE SHOE VARIABLE-SPEED TRIGGER VARIABLE-SPEED DIAL ORBITAL ACTION ANTI-SLIP COMFORT GRIP TOOL LENGTH TOOL WEIGHT
10AMPS 0-2,800SPM 1-1/8" LEVER YES FIXED YES NO NO NO 17.5" 7.0LBS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS
T.DW292K
1/2" (13MM) IMPACT WRENCH KIT-DW292K
T.D25600KP
1-3/4" SDS MAX ROTARY HAMMER KIT-D25600K
SPECIFICATIONS
AMPS NO LOAD SPEED MAX TORQUE IMPACTS/MIN TOOL LENGTH TOOL WEIGHT
7.5AMPS 2,100RPM 345FT-LBS 2,700IPM 11-1/4" 7.0LBS
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
201
© 2010 STEEL AND PIPES, INC.
• 345 ft-lbs of deliverable torque in forward and reverse • 1/2" detent pin anvil • AC/DC forward/reverse rocking switch • Soft grip allows for superior ergonomics • Ball bearing construction for increased durability
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS
T.D28111S-B3
4-1/2” ANGLE GRINDER-D28111 T.DW328
DEEP CUT VARIABLE SPEED PORTA - BAND® SAW-DW328
• Powerful 6.0 Amp motor designed to withstand jobsite applications • 4-3/4” deep cut capacity for round or rectangular stock • Dual bearing blade guide rollers increase durability in the blade support system • Speed control knob allows user to tailor the blade speed for various applications • AC/DC switch allows use in both alternating and direct current • Blade tracking adjustment increases blade life by providing better blade tracking SPECIFICATIONS
AMPS FT/MIN MAX CAPACITY (ROUND) MAX CAPACITY (RECTANGULAR) FRONT HANDLE STYLE LED LIGHT AC/DC CAPABILITY RUBBER BUMPERS TOOL LENGTH TOOL WEIGHT
• Small girth allows comfortable griping resulting in superior ergonomics • Fully leaded stator windings for increased motor durability • Abrasion protected field for increased durability • Anti lock flange prevents flanges from permanently locking up and locking the disc on • Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability • One piece brush arm prevents brush hang up in extreme conditions • The low profile gear case allows access in confined areas • Side positioned spindle lock gives greater protection to button when using in confined spaces SPECIFICATIONS
POWER INPUT NO LOAD SPEED SPINDLE LOCK SIDE HANDLE TOOL WEIGHT MAX. DISC DIAMETER SPINDLE THREAD POWER OUTPUT WEIGHT LENGTH HEIGHT HAND/ARM VIBRATION HAND/ARM VIBRATION UNCERTAINTY K 1 (VIBRATION) SOUND PRESSURE UNCERTAINTY K 1 (SOUND) ACCOUSTIC PRESSURE UNCERTAINTY K 2 (SOUND)
6.0AMPS 100-245FPM 4-3/4" 4-1/2" X 4-3/4" POMMEL NO YES NO 21.5" 14.0LBS
850 WATTS 10000 RPM
115 MM M14 360 WATTS 1.6 KG 270 MM 80 MM GRINDING SANDING
T.D28700-B3
14" (355MM) CHOP SAW-D28700
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
AMPS NO LOAD SPEED HP QUICK LOCK VISE WHEEL ARBOR WHEEL DIAMETER MAX CAPACITY (ROUND) MAX CAPACITY (RECTANGULAR) BLADE CHANGE TOOL LENGTH TOOL WEIGHT
202
15AMPS 3,800RPM 4HP YES 1" 14" 4-1/2" 4-3/4 X 5-1/3" WRENCH 21" 35.0LBS
• 15.0 Amp/4.0 HP (maximum motor HP) motor provides overload protection, increasing performance and durability • Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity • Quick-Lock Vise allows for fast clamping on different size materials to increase productivity • 45° pivoting fence allows for fast and accurate angle cuts • Steel base allows user to weld jigs or stops directly onto the base • Spindle Lock allows user to make wheel changes quickly and easily, saving time and money • Integrated top handle allows the saw to be carried around easily • Heavy-duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain • Adjustable spark guard allows the users to direct sparks away from the work area • On-board wheel change wrench allows for convenient storage and greatly reduces the risk of lost wrenches • Compression spring provides smoother movement and increased durability versus torsion springs
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
T.D28491
METAL WORKING -7” LARGE ANGLE GRINDERS - 180MM GRINDER /15 AMP • Abrasion protected motor for increased durability • Two position side handle allows the user to optomise handle postion to give maxium comfort. • Spindle lock for quick wheel changes • Brush window allows quick brush replacement STANDARD • Protective guard • Side handle • Inner and outer disc flanges • Spanner
SPECIFICATIONS
POWER INPUT NO LOAD SPEED MAX. DISC DIAMETER SPINDLE THREAD WEIGHT LENGTH HEIGHT POWER OUTPUT
2000 WATTS 8500 RPM 180 MM M14 4.6 KG 490 MM 151 MM 1054 WATTS
T.DCD950KX
1/2" (13MM) 18V CORDLESS XRP™ HAMMERDRILL/DRILL/DRIVER KIT • XRP™ extended run-time batteries provide long run-time and battery life • Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time • Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping strength • LED worklight provides increased visibility in confined spaces • High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling and fastening applications • Best in class length for improved balance and better control SPECIFICATIONS
Model ECO-50AK has an automatic cooling/lubrication system built into the arbor
VOLTAGE MAX POWER NO. OF SPEED SETTINGS MAX RPM MAX BPM CLUTCH SETTINGS CHUCK SIZE CHUCK TYPE TOOL WEIGHT
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS
18V 450UWO 3 0-500/0-1,250/0-2,000 0-8,500/0-21,250/0-34,000 22 1/2" METAL, SELF-TIGHTENING 6.25LBS
STANDARD EQUIPMENT INCLUDES: • Auto Chuck cutter holder • Carrying case • Safety chain • Carabin hook • Allen keys
T.DRILL.ECO-50AK
• Drills up to 2" diameter holes with Annular Cutters • Lightweight and portable at 29 lbs. • Strong 10.5 Amp motor and two-speed gearbox • HD dual-coil magnet has holding strength of 3750 lbs. • Easy "twist and lock" keyless arbor for cutters • Compact height of 16-1/2" allows drilling in small spaces • With a 3/4" chuck (Part No. IBK-22), these models easily convert to standard drill presses with a 5" stroke for up to 7/8" dia. twist drills
SPECIFICATIONS
MODEL NO.: MOTOR POWER: WEIGHT: HOLE CAPACITY: TWIST DRILL CAPACITY: SPEEDS: MAGNET BASE SIZE: DIMENSIONS: MAGNETIC FORCE (1" PLATE): ARBOR BORE:
ECO-50AK 10.5 AMP / 110 VOLT* 29 LBS. 2" DIA. 7/8" DIA. GEAR 1: 250 RPM, GEAR 2: 450 RPM 6-1/2" L X 3-1/2" W 16-1/2" H X 9" L X 6-3/8" W 3750 LBS. 3/4"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
203
© 2010 STEEL AND PIPES, INC.
ECO-50AK PORTABLE MAGNETIC DRILL
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS Model MDM-40 is a powerful hole cutting machine for steel fabricators, bridge contractors and plant maintenance.
T.DRILL.MDM40
MDM-40 PORTABLE MAGNETIC DRILL • Powerful hole cutting machine for steel fabricators, bridge contractors and plant maintenance • Compact height of 13" allows drilling in tight spaces • Lightweight and portable at only 24 lbs. for use on the job site or in the shop • Strong 9.25 Amp double-insulated motor • One-piece motor mount and arbor support for added strength and stability • High-density dual-coil magnet has holding strength of 2640 lbs. • Drills up to 1-1/2" diameter holes with Annular Cutters • One-year warranty SPECIFICATIONS
STANDARD EQUIPMENT INCLUDES: • Auto lubrication • Carrying case • Safety strap • Carabin hook, • Gloves • Safety glasses • Ear protection • Allen keys.
MODEL NO.: MOTOR POWER: WEIGHT: HOLE CAPACITY: SPEED: MAGNET BASE SIZE: DIMENSIONS: MAGNETIC FORCE (1" PLATE): ARBOR BORE: AUTOMATIC LUBRICATION:
MDM-40 9.25 AMP / 110 VOLT* 24 LBS. 1-1/2" DIA. 440 RPM 6-1/2" L X 3-1/4" W 13" H X 9-1/2" L X 7" W 2640 LBS. 3/4" INCLUDED
*220 VOLT / 50HZ ALSO AVAILABLE
UNIBROACH® HIGH-SPEED STEEL (HSS) CUTTERS • CNC precision ground for fast penetration,accuracy and long life • Drill holes 3 times faster than twist drills • Produce reamed-quality burr-free holes and solid slugs • Reduce machine size and weight • Cutting edges are resharpenable • Eliminate time-consuming,costly pilot holes and step drilling
© 2010 STEEL AND PIPES, INC.
Annular Cutters are the standard hole-making drills in the industry.Ideal for heavy-duty use on-site or in the shop,our HSS Unibroach cutters are available in the following sizes: 1" drill depth – ø 7/16" to ø 5" 2" drill depth – ø 7/16" to ø 5" 3" drill depth – ø 3/4" to ø 5" CNC-ground flutes run the length of the cutter for efficient chip clearance.This increases drilling productivity and decreases cutter breakage
204
ITEM CODE
DESCRIPTION
T.DRILL.BIT.100 T.DRILL.BIT.106 T.DRILL.BIT.112 T.DRILL.BIT.125 T.DRILL.BIT.137 T.DRILL.BIT.150 T.DRILL.BIT.175 T.DRILL.BIT.5 T.DRILL.BIT.50 T.DRILL.BIT.56 T.DRILL.BIT.58 T.DRILL.BIT.687 T.DRILL.BIT.75 T.DRILL.BIT.812 T.DRILL.BIT.875 T.DRILL.BIT.94
CUTTER 1" X 2" DEPTH CUTTER 1-1/16" X 2" DEPTH CUTTER 1-1/8" X 2" DEPTH CUTTER 1-1/4" X 2" DEPTH CUTTER 1-3/8" X 2" DEPTH CUTTER 1-1/2" X 2" DEPTH CUTTER 1-3/4" X 2" DEPTH CUTTER 1/2" X 1" CUTTER 1/2" X 2"DEPTH CUTTER 9/16" X 2" DEPTH CUTTER 5/8" X 2" DEPTH CUTTER 11/16" X 2" DEPTH CUTTER 3/4" X 2" DEPTH CUTTER 13/16" X 2" DEPTH CUTTER 7/8" X 2" DEPTH CUTTER 15/16" X 2" DEPTH
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
POWER TOOLS T.CS2000P-B3
CHOP SAW 2000WATT -14” (35MM) PROFESSIONAL T.G720K
4-1/2”(115MM) ANGLE GRINDER PROFESSIONAL 800W SPECIFICATIONS
POWER SPEED SPINDLE CORD
800 W 10000RPM 5/8”-11/M14 2M
KD975KA
710W 1.8J PNEUMATIC HAMMER DRILL • 710W power - Powerful unit for serious drilling • High performance, non slip SDS-Plus chuck for quick accessory changing • 1.8 Joule of impact energy allows the user to drill into hard materials such as concrete and granite • Powerful Pneumatic Hammer 0-5180 impacts per minute. • Variable speed offers more control and versatility • Secondary handle to provide additional control • Depth guide to assist the user when a predetermined depth is needed.
T.PW1550
POWER VOLTAGE CHUCK HAMMER MAX.CAPACITY-STEEL MAX.CAPACITY-WOOD MAX.CAPACITY-CONCRETE REVERSE SPEED NO LOAD SPEED CABLE LENGHT ADJUSTABLE DEPTH STOP ADJUSTABLE SECOND HANDLE LOCK-ON SWITCH KIT BOX
710 W 230V SDS+ YES 13MM 30MM 22MM YES VARIABLE 0-980 RPM 3M YES YES YES YES
1500 WATTS PRESSURE WASH • Turbo nozzle, 60% more power • Includes wash brush • On boeard accessories storage • Easy and confortable to move SPECIFICATIONS
POWER WATER FLOW MAX. PRESSURE
710 W 1,6GPM 1700PSI
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
205
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
COMPRESSORS/PARTS COMPRESSOR 150 PSI 20 GAL. OIL-FREE HORIZONTAL
175 PSI 80 GAL. STATIONARY
Model Number: TC.C5101
Model Number: TC.C7550
Model Number: TC.C7501
AIR HOSE VIN 3/8 X 50 Model Number: TC.60250
AIR HOSE VIN 3/8 X 25
17 PC ACCESSORY KIT
Model Number: TC.60325
Model Number: TC.PAK253
1/4” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-F
1/4” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-M
3/8” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 3/8”-F
Model Number: TC.PAB251
Model Number: TC.PAB252
Model Number: TC.PAB381
3/8” UNIVERSAL PUSH-TO-CONNECT, QC BODY, 1/4”-M
1/4” UNIVERSAL QC PLUG, 1/4”-F
1/4” UNIVERSAL QC PLUG, 1/4”-M
Model Number: TC.PAP251
Model Number: TC.PAP252
3/8” UNIVERSAL QC PLUG, 3/8”-F
3/8” UNIVERSAL QC PLUG, 3/8”-M
3/8” FILTER
Model Number: TC.PAP381
Model Number: TC.PAP382
3/8” REGULATOR
3/8” FILTER/REGULATOR
AIR COMPRESSOR OIL
Model Number: TC.PF383
Model Number: TC.PF384
Model Number: TC.PAS1
Model Number: TC.PAB382
© 2010 STEEL AND PIPES, INC.
135 MAX PSI STATIONARY 60 GAL. 240V 3.0 RUNNING HP
206
Model Number: TC.PF382
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
STAINLESS STEEL AND METAL 1/4” SHANK PART NUMBER
DESCRIPTION
DIMENSIONS
240.006.SA1DC 240.006.SA3DC 240.006.SA5DC
CYLINDRICAL SS(SA1DC) CYLINDRICAL SS(SA3DC) CYLINDRICAL SS(SA3DC)
1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"
240.006.SB1DC 240.006.SB3DC
CYLINDRICAL END CUT SS(SB1DC) CYLINDRICAL END CUT SS(SB3DC)
1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4"
240.006.SC1DC 240.006.SC3DC 240.006.SC5DC
CYLINDRICAL BALL NOSE SS(SC1DC) CYLINDRICAL BALL NOSE SS(SC3DC) CYLINDRICAL BALL NOSE SS(SC5DC)
1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"
240.006.SD1DC 240.006.SD3DC
BALL SHAPE SS(SD1DC) BALL SHAPE SS(SD3DC)
1/4" X 1/4" X 1/4" 3/8" X 3/8" X 1/4"
240.006.SE3DC
OVAL SHAPE SS(SE3DC)
3/8" X 5/8" X 1/4"
240.006.SF1DC 240.006.SF3DC 240.006.SF5DC
ROUND TREE SHAPE SS(SF1DC) ROUND TREE SHAPE SS(SF3DC) ROUND TREE SHAPE SS(SF5DC)
1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"
240.006.SG1DC 240.006.SG3DC 240.006.SG5DC
POINT TREE SHAPE SS(SG1DC) POINT TREE SHAPE SS(SG3DC) POINT TREE SHAPE SS(SG5DC)
1/4" X 5/8" X 1/4" 3/8" X 3/4" X 1/4" 1/2" X 1" X 1/4"
240.006.SL1DC 240.006.SL3DC
14˚ ANGLE SHAPE SS (SL1DC) 14˚ ANGLE SHAPE SS (SL3DC)
1/4" X 5/8" X 1/4" 3/8" X 1-1/16" X 1/4"
240.006.SM4DC
POINT CONE SHAPE SS(SM4DC)
3/8" X 3/4" X 1/4"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
207
© 2010 STEEL AND PIPES, INC.
CARBIDE BURS
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
HOLE SAWS, ARBORS, SHANKS BI-METAL HOLE SAW ITEM CODE
HOLE SAW DIAMETER
250.019.60168 250.019.60170 250.019.60172 250.019.60176 250.019.60178 250.019.60180 250.019.60182 250.019.60184 250.019.60186 250.019.60188 250.019.60189 250.019.60191 250.019.60192 250.019.60194
5/8” 3/4“ 7/8” 1-1/8 1-1/4“ 1-3/8” 1-1/2” 1-5/8” 1-3/4” 1-7/8” 2” 2-1/8” 2-1/4” 2-3/8”
A4 HOLE SAW ARBOR WITH DRILL FITS HOLE SAW DIAMETER INCH/MM
9/16" – 1-3/16" (14-30 mm)
ITEM CODE
250.019.55144
SHANK SIZE (INCH/MM)
SCREW THREAD
1/4" (6.5mm) Hex
1/2-20
1/4” PILOT DRILL FOR ARBOR KA4 250.019.60164 • High Speed Steel.
UNIFIED SHANK® ASSORTMENT PACKS WOOD CUTTING ASSORTMENT PACK: 250.019.68748 • Includes one each: BU36, BU46, BU38, BU310T and BU214S BU1 68748
© 2010 STEEL AND PIPES, INC.
MULTI-PURPOSE ASSORTMENT PACK: 250.019.68749 • Includes one each: BU46, BU310T, BU214, BU224S and BU232 BU2 68749 METAL CUTTING ASSORTMENT PACK: 250.019.68750 • Includes one each: BU41014, BU214, BU224, BU224S and BU232 BU3 68750
208
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRAIGHT SHAPE GENERAL PURPOSE RECIPROCATING BLADES DIMENSIONS (LENGTH x WIDTH x THICKNESS)
20 BLADE PACKS CAT. NO. ITEM CODE
6" x 3/4" x 035" B624-20 152mm x 19mm x 0 90mm B618-20 8" x 3/4" x 035" 203mm x 19mm x 0 90mm B818-20
250.019.20114 250.019.20113 250.019.20127
K145 CLOSED GRIP HIGH-TENSION HEAVY DUTY HACKSAW FRAME 250.019.0011 • The K145 is a professional quality hightension frame that provides an easy to use and efficient adjustment lever Its comfortable rubber handle and thumb hold provide a sure, ergonomic grip Four permanently angled mounting pins allow for both straight and angle cutting The mounting pins keep the blade secure even when tension is released.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
SAW BLADES, HACKSAW, HACKSAW BLADES
POWERBAND BI-METAL UNIQUE SAW BLADES • For Portable Band Saw Machines DIMENSIONS (LENGTH x WIDTH x THICKNESS)
CAT. NO.
44-7/8" x 1/2" x .020” x 18
BM18
ITEM CODE
250.019.14602
HOLE SAW ARBOR ADAPTER
BI-METAL UNIQUE® HIGH SPEED STEEL SAFE-FLEX® HACKSAW BLADES • These conventional bi-metal hacksaw blades offer a sturdier construction • An excellent choice for demanding off-hand use or light power-assisted machine applications
250.019.63260
DIMENSIONS (LENGTH x WIDTH x THICKNESS)
CAT. NO.
12" x 1/2" x 025" 300mm x 13mm x 65mm
KBS1218-10
20 BLADE PACKS ITEM CODE
250.019.0008
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
209
© 2010 STEEL AND PIPES, INC.
• Fits arbors KA1, KA4 and KA11 • This handy adapter allows use of hole saws up to 6” (152mm) for light duty work.
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS SPRAY GUN-1 QT DBLE BLIST
219.019.0050 • Heavy Duty Construction • Adjustable Spray Pattern Control. • Dual Action Trigger. • Anti-drip, 1 Quart Polished Cast Aluminum Siphon Cup with Quick-Release Cover. • External Mix, Siphon Feed Gun. • Forged Air Cap and Spray Head. • Precision-Machined Brass Nozzle. • Provides a Constant, Uniform Finish Every Time. • Air Hose Connector: G1/4''. • Air Consumption: 4-7 CFM. • Fluid Nozzle Diameter: 2. • 0 MM. For Use with 2 Hp Air Compressor or Larger.
4" FLEX JAW SPRING
219.021.040 • Jaw Contoured to Hold Round and Odd • Shaped Object. • Durable Soft Pads Protect Work. • Handles Designed for Comfortable Hand • Span. • Swivel Pad for Better Grip.
TRAILER LIGHT KIT 219.019.0075
• Add or Upgrade the Light on your Utility Trailer, Snowmobile, Camper, or Boat. • High Visibility Safety Lights are Easy to Mount • Set Includes: One Pair Multi-Function Trail Lights. One Pair Side Marker Lights. License Plate Brackets. Two Wiring Harnesses.
SAFETY SCRAPER + 5 BLADES
219.019.0023 • Ideal for Open Cartons, Cuts String or Rope, Splice Wire, Prune Plants, Scrape Windows, Paint and Wallpaper. • 5 Extra Blades Included.
6" PISTOL GRIP RATCHET BAR CLAMP
4" PISTOL GRIP RATCHET BAR CLAMP
219.021.04 • Jaws can be Reversed and Used as a Spreader. • Easy to Use. • Nylon Fiber Filled Jaws. • Strong and Light Weight. • Jaw Opening: 4" • 105MM Jaw Opening. • For #22560. • 6" 150MM Jaw Opening. • For #22570. • 12" 300MM Jaw Opening. • For #22580. • 24" 600MM Jaw
© 2010 STEEL AND PIPES, INC.
219.021.06
• Jaws can be Reversed and Used as a Spreader. • Easy to Use. • Nylon Fiber Filled Jaws. • Strong and Light Weight. • Jaw Opening: 4" • 105MM Jaw Opening. • For #22560. • 6" 150MM Jaw Opening. • For #22570. • 12" 300MM Jaw Opening. • For #22580. • 24" 600MM Jaw
210
2 X 3/4 X 2-1/2" LONG TRAILER BALL 219.019.0075
TOWING ACCESSORY KIT -2"
• Drop Forged, Full Polished & Chrome Plated. • Stainless Steel Construction. • External Thread.
219.019.0070
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS 17 PC TITANIUM DRILL BIT SET 609.0105
17 PC DRILL & MASONARY BIT SET 609.0100
UTILITY KNIFE 250.019.0021
COMBINATION CUTTER SET 250.019.0020
4 IN 1 COMPOSITE HACK SAW 250.019.0012
2" LAMINATED PADLOCK
250.019.0065
50' X 3/16" WHITE POLY ROPE 250.005.0020
LOAD BINDER 5/16” - 3/8”
218.001.51650 • High Quality Heat Treated Carbon Steel. • Corrosion • Resistant Baked Enamel Finish. • Drop Forged Ball, Socket and Hooks. • Provides Easy, Secure Tightening, and Quick • release of Loads. • Max Capacity: 5400lbs. • Accepts all Chain from 5/16'' to 3/8''.
4T CABLE PULLER 2 SOLID GEARS
218.001.51470 • Hardened and Galvanized Heavy Gauge Steel. • 3 Drop Forged Safety Catch Hooks for Heavy Loads. • Trouble • Free Thumb Control Release for Maximum Safety. • Powerful Dual Solid Gear Ratcheting System is Excellent for Pulling Heavy • Duty loads. • 10,000 Lbs Pulley
218.001.51410 • Hardened and Galvanized Heavy Gauge Steel. • Trouble • Free Thumb Control Release for Maximum Safety. • Powerful Dual Ratcheting System is Excellent for Pulling Heavy • Duty Loads. • 3 Drop Forged Safety Catch Hooks for Heavy Loads. • 5,000 Lbs Pulling Cap
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
211
© 2010 STEEL AND PIPES, INC.
2 TON COMELONG-3 HOOK
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS 57 PC RATCHETING SCREWDRIVER SET 250.019.0035
6 IN 1 SCREWDRIVER
250.019.0030 • Chrome Plated Tube with 1/4" and 5/16" Nut Drivers on Opposite Sides. • High Visibility Orange and Green Handles Make Screwdrivers Easy to Locate. • For the Most Popular Slotted, Phillips and Hex Fasteners • Spring • Loaded Steel Ball Bearings Hold Bits and
4PC RATCHET TIE DOWNS 200.0004
1” X 15’ RATCHET TIE DOWN 200.0001
2"X27' NYLON BELT W/RATCHET 200.0200
2"X27' RATCHET TIE DOWN 10,000LB
© 2010 STEEL AND PIPES, INC.
200.2000
• 2" Wide Weather • Resistant Nylon webbing strap. • Trouble • Free, Push Button Quick • Release. • Durable 27' Straps will not Loosen with Road Vibration. • Ideal for Trucks, Trailers, Heavy Haulers, and any Other
212
4" X 25' SLING W/ LEATHER END
200.0425 • Strong Nylon Webbing with Loops on Both Ends. • 10,000IB Capacity. • Stretches to Snatch Vehicles from Mud, Sand or Snow.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
6" ADJUSTABLE STEEL CALIPER
250.019.0033 • Slide Lock to Hold Readings. • Thumb Roll for Easy Adjustment. • Steel Construction with Die • Stamped Increments.
TARPS ITEM CODE
DESCRIPTION
251.003.0810 251.003.1012 251.003.1216 251.003.1620 251.003.2020 251.003.2030 251.003.3040
8' x 10' PVC POLY TARP - 80 SF 10' x 12' PVC POLY TARP - 120 SF 12' x 16' PVC POLY TARP - 192 SF 16' x 20' PVC POLY TARP - 320 SF 20' x 20' PVC POLY TARP - 400 SF 20' x 30' PVC POLY TARP - 600 SF 30' x 40' PVC POLY TARP - 1200 SF
• Poly Woven Tarp Coated on Both Sides with Polyethylene Film. • Water, Mildew and Rust Resistant. • Four Plastic Reinforced Corner Bars for Extra Strength and Longer Life. • Rust Resistant Grommets Approximately Every Three Feet Along all Four Heat Welded Edg
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS
DIGITAL MULTIMETER
ITEM CODE
251.019.0036 251.019.0038 251.019.0037
DESCRIPTION
2-9/16" x 1/4 2-9/16" x 3/8 2-9/16" x 5/16
BRASS COUPLER -5 PC QUICK
TC.10040 • Precision Zinc-Cast Construction. • Easily Locks Tool onto Air Hoses. • Coupler Assures Easy Connects and Disconnects. • Universal Fit for All 1/4'' NPT Tools. • Fittings Rotate to Eliminate Twisted Hoses.
RAIN PONCHO HEAVY DUTY ONE SIZE FITS ALL
251.001.0120 • Hooded Rain Poncho with Drawstring. • Heavy Polyethylene Construction. • Convenient and Easy to Carry. • Reusable.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
213
© 2010 STEEL AND PIPES, INC.
3PC MAG NUTSETTER
250.019.0090 • Led Readout • 7 Functions, 19 Ranges • Low Battery Included • Overload Protection • 1000 Volt Max. • User Manual Included • Accurate to +/~.005%
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS RUBBER COVER TAPE 16' X 3/4" 610.T.16
100' FIBERGLASS TAPE MEASURE 610.T.76450 • Professional quality. • SAE and surveyors scale. • 100% fiberglass. • Brass anchor point. • All steel handle.
TEFLON TAPE-2PC.
250.499.015 • Tape Size: 1/2'' x 520'' x 0. • 075mm. Seals threaded Plastic or Metal Pipe and Tubing Connections. • Use on Most Water, air, or Gas Lines. • Ideal for Plumbers, Mechanics, Contractors, and Homeowners. • Two 43' x 1/2: Rolls • 86' Overall Length.
3/4"X 30' UL ELECTRIC TAPE
250.020.005 • Size: 3/4" x 60FT. • (20 YDS.) Suitable for Use at Not More Than 600V and Not More Than 80?C (176?F) • U/L Approved.
That’s why we are the company of choice!
1/2"X 260' TEFLON TAPE-20PC SB
© 2010 STEEL AND PIPES, INC.
250.499.014
214
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS
EM81.9 9" HEAVY-DUTY MAGNETIC TORPEDO LEVEL
250.019.EM81.9 • True Blue® vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions • Heavy-duty extruded aluminum frame • Vials read plumb, level and 45°. • Strong-holding magnetic edge • V-grooved working edge fits on pipe or conduit
581-9 9" MAGNETIC TORPEDO LEVEL 250.019.581-9
EM81.12 EMPIRE 12” MAGNETIC TOOL BOX LEVEL 250.019.581-12
• Durable acrylic vials read plumb, level and 45° • Solid aluminum frame, 9" overall length • Magnetic edge frees hands
580-24 24" ALUMINUM LEVEL 331-9 9" MAGNETIC TORPEDO LEVEL
POLYCAST®
250.019.331-9 • Strong, accurate 9" Polycast® frame • Non-conductive frame insulates from heat, cold and electricity • Strong holding magnetic edge • Vials read plumb, level and 45°
581-48 48" MAGNETIC ALUMINUM LEVEL 250.019.581-48
250.019.580-24
580-48 48" ALUMINUM LEVEL
250.019.580-48 • Advanced frame design assures accuracy • Top read window • Beveled endcaps protect vials from shock
EM71.24 24" MAGNETIC LEVEL
581-72 72" MAGNETIC ALUMINUM LEVEL 250.019.581-72 • Magnetic edge holds to ferrous surfaces • Advanced frame design assures accuracy • Top read window • Beveled endcaps protect vials from shock
• True Blue® vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions • Dual molded rubber endcaps for extreme shock resistance • 300° view top-reading level vial • Rare Earth magnets for super-strong hold onto ferrous surfaces • Vial Guard to protect vials • Gripping surface for assist drawing straight lines
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
215
© 2010 STEEL AND PIPES, INC.
250.019.580-24
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS Fuller®
MECHANIC SCREWDRIVER 1/4 IN. X 4 IN. RND SHANK #1-3” PHILLIPS SCREWDRIVER
255.107-0406
255.107-0422
MECHANIC SCREWDRIVER 3/8 X 8 IN. RND SHANK
#3-6” PHILLIPS SCREWDRIVER 255.107-0424 • Serrated tip for maximum gripping performance, chrome vanadium steel blade for strength and durability • One piece shatterproof handle • Extra large fluted handles for maximum comfort and torque
255.107-0410 • Serrated tip for maximum gripping performance, chrome vanadium steel blade for strength and durability • One piece shatterproof handle • Extra large fluted handles for maximum comfort and torque
PRO GROOVE JOINT PLIERS 10 255.401-0113
• Sure-gripping precision milled jaws. • Grooves undercut to prevent slipping when tightening.
SLIP JOINT PLIERS 6
255.401-0111 • A general purpose tool for gripping and bending objects. • The pivot point provides for two convenient widths of jaw opening.
GROOVE JOINT PLIERS 10”
255.401-0115 • For gripping round work, such as pipes and damaged nuts that may slip in an adjustable wrench or socket. • The different grooves provide a choice of jaws openings.
DIAGONAL CUTTING PLIER 6 255.406-1906 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.
5” CURVED LOCKING PLIER WITH WIRE CUTTER © 2010 STEEL AND PIPES, INC.
255.435-9901
7” CURVED LOCKING PLIER WITH WIRE CUTTER 255.435-9902 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.
216
10” STRAIGHT LOCKING PLIER
255.435-9904 • For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS Fuller®
PRO
6” LONG NOSE LOCKING PLIER WITH WIRE CUTTER 255.435-9905
6 PCS SAE COMBINATION WRENCHES SET
9” LONG NOSE LOCKING PLIER WITH WIRE CUTTER
255.426-2106
255.435-9906
• For cutting wire close to the surface. • The tapered head allows clearance for the user’s knuckles.
3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”
PRO
PRO
LONG NOSE CUTTING PLIERS 6” 255.406-1926
LONG NOSE CUTTING PLIERS 8” 255.406-1928 • Strong sure-gripping jaws manipulate wire and other awkward objects. • Slim tapered head extends reach and mantains visibility in small areas
PRO 700 SCREWDRIVER 7 PCS SET 255.107-5070 #1, #2 #1, #2 1/8” X 3”, 3/16” X 4”, 1/4” X 4”
ADJUSTABLE WRENCHES 255.416-0006 6” 255.416-0008 8” 255.416-0010 10” 255.416-0012 12” • Designed for general purpose usage constructed of durable alloy steel
PIPE WRENCHES 255.431-0041 8” 255.431-0042 10” 255.431-0043 14” 255.431-0046 24”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
217
© 2010 STEEL AND PIPES, INC.
PRO
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
TOOLS Fuller®
255.130-7610
9 PCS METRIC LONG ARM HEX KEY SET
255.600-4116
HARDWOOD HANDLE CLAW HAMMER 16OZ.
1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm
• Fuller brand wood handle hammers feature a natural colour hardwood handle and durable semi-polished heat-treated head
PRO 250.020.001
24” BOLT, ROD AND WIRE CUTTER • Cuts up to 3/84”
255.130-7701
8 PCS SAE FOLDING HEX KEY SET
250.020.002
36” BOLT, ROD AND WIRE CUTTER
0.005, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”
• Cuts up to 9/16”
255.130-7702
9 PCS SAE FOLDING HEX KEY SET 5/64”, 3/32”, 7/64”, 1/8”, 9/64“, 5/32” 3/16”, 7/32”, 1/4”
HIGH SPEED STEEL TWIST DRILL BITS • FULLER high speed steel drill bits are designed for drilling into steel, wood and plastics. • Their precision ground 118˚ drill tips are excellent for general purpose use.
© 2010 STEEL AND PIPES, INC.
609.0008 609.0012 609.0016 609.0020 609.0024 609.0025 609.0026 609.0028 609.0032
218
1/8” 3/16” 1/4” 5/16” 3/8” 25/64” 13/32” 7/16” 1/2”
PRO FULLER PRO MASONRY DRILL BITS • FULLER masonry drill bits are designed for use in dry concrete, brick and tile. 255.805-3012 255.805-3014 255.805-3020 255.805-3022 255.805-3031
3/16” X 3-1/3“ 1/4” X 6” 1/2” X 6” 5/8 X 6” 5/32 X 5-1/2”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SEM RUBBERIZED UNDERCOATING SPRAY
Z-GRIP BODY FILLER ITEM CODE
205.100282 205.100280
DESCRIPTION
Z-GRIP BODY FILLER/GALLON Z-GRIP BODY FILLER/QUARTS
205.39523
• A paintable, fast-drying, multi-purpose coating for rust proofing, sounddeadening, chip resistance and corrosion protection.
• An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7™ for superior adhesion to galvanized steel, bare steel and aluminum.
SPREADERS 4"
205.GL1204 • 4 inch plastic speaders used for applying filler on body panels. Also useful for applying or smoothing out POR Patch for sealing seams etc...
DURA BUILD PRIMER GRAY ITEM CODE
205.102274 205.102273
WELDING EQUIPMENT, TOOLS & HAND TOOLS DIVISION
BODYWORK PRODUCTS
DESCRIPTION
DURA BUILD PRIMER GRAY/GAL. DURA BUILD PRIMER GRAY/QTS.
• An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7™ for superior adhesion to galvanized steel, bare steel and aluminum.
3M SAND PAPER 9"X11" ITEM CODE
DESCRIPTION
205.100400 205.220400 205.320400 205.400400 205.500400 205.600400
3M SAND PAPER 9"X11" #100 3M SAND PAPER 9"X11" #220 3M SAND PAPER 9"X11" #320 3M SAND PAPER 9"X11" #400 3M SAND PAPER 9"X11" #500 3M SAND PAPER 9"X11" #600
FIBERGLASS REPAIR KIT QUART
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
219
© 2010 STEEL AND PIPES, INC.
205.BDK-14
• Fast and easy permanent repairs of fiberglass, most woods and metals. Strengthens, repairs and rebuilds. Repair cracks and holes in fiberglass and wood. Kit may be used for small lay-up jobs or fabricating missing fiberglass panels. Includes: 8 fluid ounces of fiberglass resin, .25 fluid ounce of liquid hardener, 3 square feet fiberglass cloth, spreader sticks and instructions.
We are your Industrial Supermarket
SAFETY EQUIPMENT DIVISION
KincoPro ™
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS KincoPro ™
KincoPro ™ 2011-UNLINED DRIVER
219.12.2011-M 219.12.2011-L 219.12.2011-XL • MiraX2™ black color synthetic leather palm • Form fitting spandex fabric back • Rubber hook and loop pull strap for wrist closure • Terry cloth sweat wipe on thumb • Machine washable
102HK-KINCOPRO™ LINED GRAIN GOATSKIN 219.12.102-M 219.12.102-L 219.12.102-XL
• Grain goatskin leather palm and fingertips • XtremeGRIP!® reinforcing and grip material palm and fingertips • Heatkeep® full sock thermal lining • AIRFLOW™ knuckle and wrist material for added protection • Rubber hook and loop pull strap for wrist closure
KincoPro ™ 908-UNLINED GRAIN PIGSKIN, MESH BACK 219.12.908-M 219.12.908-L 219.12.908-XL • Green nylon mesh back for those hot summer days • 3M™ Scotchlite™ reflective material • Keystone thumb
KincoPro ™ 909-UNLINED GRAIN PIGSKIN, MESH BACK 219.12.909-M 219.12.909-L 219.12.909-XL • Orange nylon mesh back for hot summer days • 3M Scotchlite™ Reflective Material • Keystone thumb
KincoPro ™
© 2010 STEEL AND PIPES, INC.
1600-PREMIUM COWHIDE DOUBLE PALM
219.12.1600.2L • Double palm green leather • Draylon® thread on palm patch for extra abrasion • Rubberized cuff • Wing thumb
222
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
KincoPro ™
The Sabres
BLUE SABRE® PREMIUM COWHIDE
• Premium grade split cowhide leather • Sewn with Kevlar® thread • Gauntlet area lined with flame retardant material • Soft fleece cotton sock lining on palm and back • Fully welted seams for total protection • Wing thumb
219.12.00035
Special Feature of the BLUE SABRE®... Reinforced Thumbstrap!
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
KincoPro ™ BLACK SABRE® PREMIUM COWHIDE 219.12.00044
KincoPro ™ RED SABRE® PREMIUM COWHIDE 219.12.00045
KincoPro ™ 0422- ECONOMY COWHIDE 219.12.422.L • Russet split cowhide • Wing thumb • Fully welted seams
KincoPro ™ RAZORBACK® PREMIUM PIGSKIN
219.12.200258 • Premium golden split pigskin • Sewn with Kevlar® thread • Wing thumb design for extra dexterity • Fully welted seams
KincoPro ™ 2045-UNLINED SAFETY REFLECTOR™
KincoPro ™ 98-WOMEN’S LINED GRAIN COWHIDE
219.12.98-M 219.12.98-L 219.12.98-XL • Grain cowhide • Jersey/foam thermal lining • Shirred elastic back
• MiraX2™ gray color synthetic leather with XtremeGRIP!®reinforcing palm material. • Kevlar® thread material to reinforce thumb. • 3M™ Scotchlite™ reflective material on wrist and knuckle strap. • High visibility green color form fitting spandex material on back. • Rubber hook and loop pull strap for wrist closure.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
223
© 2010 STEEL AND PIPES, INC.
219.12.2054-L
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENT KincoPro ™
50RL-LINED DRIVERS SUEDE COWHIDE
219.12.50RL.L • Suede cowhide • Black fleece thermal lining • Keystone thumb
KincoPro ™
51PL-LINED DRIVERS SUEDE COWHIDE
219.12.51PL.L • Suede cowhide • Thermal pile lining • Keystone thumb
KincoPro ™ 2031-UNLINED PRO CARPENTER™ 219.12.2031.L
• 3-cut finger design. • MiraX2™ gray color synthetic leather with XtremeGRIP!® reinforcing palm material. • Kevlar® thread material to reinforce thumb. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb
KincoPro ™ 2035-UNLINED PRO FOREMAN™
219.12.2035.L • Double layer of MiraX2™ tan and brown color synthetic leather palm. • MiraX2™ on back with rubber knuckle protectors. • Form fitting spandex fabric back. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb.
KincoPro ™
© 2010 STEEL AND PIPES, INC.
2041-UNLINED PRO GENERAL™
219.12.2041.L • MiraX2™ gray color synthetic leather with XtremeGRIP!® reinforcing palm material. • Kevlar® thread material to reinforce thumb. • Form fitting spandex fabric back. • Rubber hook and loop pull strap for wrist closure. • Terry cloth sweat wipe on thumb.
224
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SAFETY EQUIPMENT DIVISION
WELDING JACKETS
JACKET 30" WELDING JACKET “YELLOW JACKET”
WELDING LEATHER JACKET
• The Golden Brown leather clothing line is made using heat and abrasion resistant select split cowhide. Garments are sewn with Kevlar thread for added seam durability and riveted stress points to increase the life of the product.
219.12.00078 219.12.00080 219.12.00082 219.12.00084 219.12.00086
DESCRIPTION
WELDING LEATHER JACKET MEDIUM WELDING LEATHER JACKET LARGE WELDING LEATHER JACKET XL WELDING LEATHER JACKET XXL WELDING LEATHER JACKET XXXL
PRODUCT NUMBER
219.12.00070 219.12.00071 219.12.00072 219.12.00073 219.12.00074 219.12.00075
DESCRIPTION
WELDING JACKET YELLOW BLUE SMALL WELDING JACKET YELLOW BLUE MEDIUM WELDING JACKET YELLOW BLUE LARGE WELDING JACKET YELLOW BLUE X-LARGE WELDING JACKET YELLOW BLUE XX-LARGE WELDING JACKET YELLOW BLUE XXX-LARGE
30" FLAME RETARDANT COTTON JACKET PRODUCT NUMBER
219.12.00060 219.12.00062 219.12.00064 219.12.00066 219.12.00068 219.12.00070
DESCRIPTION
WELDING JACKET GREEN MEDIUM WELDING JACKET GREEN LARGE WELDING JACKET GREEN XL WELDING JACKET GREEN XXL WELDING JACKET GREEN XXXL WELDING JACKET YELLOW BLUE SMALL
WELDING COTTON JACKET-ORANGE DRAGON SHIELD PRODUCT NUMBER
219.12.00090 219.12.00091 219.12.00092
DESCRIPTION
WELDING JACKET ORANGE DRAGON SHIELD LARGE WELDING JACKET ORANGE DRAGON SHIELD XLARGE WELDING JACKET ORANGE DRAGON SHIELD X X-LARGE
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
225
© 2010 STEEL AND PIPES, INC.
PRODUCT NUMBER
• Superior flame, heat and abrasion resistant, select cowhide leather sleeves for heavy duty protection. • 30" length jacket made of blue 9 oz. Proban FR7A flame retardant cotton sateen for safety and cool comfort. • 5 snap closure front, minimizes hot shooting spatter from entering. • Inside utility pocket for safety and convenience. • All leather seams double stiched with Dupont Kevlar® thread for added durability.
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS HIGH VISIBILITY
ANSI / ISEA 107
TRAFFIC SAFETY
COMPLIANT TRAFFIC VESTS Vests meet or exceed the ANSI/ISEA 107-2004 High Visibility Standard, provides your worker 360° visibility. Features: two color choices (hi-viz orange or yellow/green), 100% polyester fabric, North-Brite™ retroreflective tape*, zipper closure, and same color fabric binding. (Sizes L-3XL) CLASS 2 • 1.5" North-Brite retro-reflective stripes, 2 vertical stripes on front and back, 1 horizontal stripe on waist. TVA2/15NZ/O: ORANGE TVA2/15NZ/L: YELLOW/GREEN
TVA2/15NZ/L
• 2" North-Brite retro-reflective stripes, 2 vertical stripes on front and back, 2 horizontal stripes on waist. TVA3/2NZ/O: ORANGE TVA3/2NZ/L: YELLOW/GREEN
NORTH-BRITE™ REFLECTIVE VESTS
• Hi-Viz, 100% polyester mesh, 2" North-Brite retro-reflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure,black binding trim. (one size) TV55RS/1S: 1" TAPE, ORANGE TV55RS/1SLY: 1" TAPE, YELLOW/GREEN TV55RS/1.5S: 1.5" TAPE, ORANGE TV55RS/2S: 2" TAPE, ORANGE TV50RSTA: 2" TAPE, ORANGE, “TEAR AWAY” HOOK & LOOP ON SHOULDER AND SIDES FOR QUICK RELEASE (ALSO AVAILABLE IN XL)
TV15RSC
ECONOMICAL MESH TRAFFIC VESTS
• Hi-Viz orange mesh, 100% polyester, elastic sides, 3" front closure, black binding trim. TV50: REGULAR TV50XL: X-LARGE
TV55RS/1S
• Hi-Viz orange or yellow/green fine mesh vest, 100% polyester, 1" silver retro-reflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure. (one size) TV15RSC: ORANGE TV15RSC/LY: YELLOW/GREEN
© 2010 STEEL AND PIPES, INC.
• Hi-Viz orange mesh traffic vest, 100% polyester, 2" yellow/green retroreflective vertical stripes on front and back, elastic sides, 3" front hook & loop closure, black binding trim. TV30RS: (ONE SIZE)
TV50
226
*North-Brite is a prismatic vinyl tape offering greater reflectivity with its omni-angular reflective properties. Omni-angular means that light is reflected back to the viewer from a greater angle than the straight-on properties offered by other tapes on the market. The unique design of the North-Brite prisms reflect light from more angles for the safety of workers who are constantly moving; the worker’s safety is enhanced with North-Brite.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FOCUS PRODUCTS
NORTH BULK FIRST AID KITS Kits contain economic bulk supplies that can be readily accessed when needed. They are ideal for manufacturing settings where a wide variety of first aid items are required. All kits are weatherproof and are available in plastic or metal. All North bulk kits are ANSIZ 308.1-2003 compliant.
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
METAL BULK FIRST AID KITS PART #
METAL BULK FIRST AID KITS
DESCRIPTION
019701-0001L 019703-0002L 019705-0003L 019707-0004L
10 PERSON BULK FIRST AID KIT 25 PERSON BULK FIRST AID KIT 50 PERSON BULK FIRST AID KIT 75 PERSON BULK FIRST AID KIT
PLASTIC BULK FIRST AID KITS PART #
DESCRIPTION
0197 00-0001L 0197 02-0002L 0197 04-0003L 0197 06-0004L
10 PERSON BULK FIRST AID KIT 25 PERSON BULK FIRST AID KIT 50 PERSON BULK FIRST AID KIT 75 PERSON BULK FIRST AID KIT
REFILL#
032072T 020855 020020 020915 020445 021645M 045028 045029 121090 041960 126040 031400 020135 045027 031570 020667 020555 752577 020126 041975D 032016D 021202P 029990 154850 045009
DESCRIPTION
10 PERSON
ADHESIVE BANDAGE, 1" X 3", PLASTIC ADHESIVE BANDAGE, FINGERTIP, CLOTH ADHESIVE BANDAGE, KNUCKLE, CLOTH ADHESIVE BANDAGE, EXTRA LARGE, PLASTIC ADHESIVE TAPE, 1⁄2" X 21⁄2 YARD ANTISEPTIC WIPES, BZK CONFORMING BANDAGE, 2"X 6 YARD, NON–STERILE CONFORMING BANDAGE, 3"X 6 YARD, NON–STERILE CPR FILTERSHIELD™ ELASTIC BANDAGE, 2" EYE–LERT®, 1 OZ. EYEWASH EYE PAD, STERILE FIRST AID/BURN CREAM WITH ALOE FIRST AID GUIDE FORCEPS, POINTED, PLASTIC INSTANT COLD PAK PAIN–A–REST®, NON–ASPIRIN SCISSORS, ANGLED, RED HANDLE ANTIBIOTIC OINTMENT POUCH STERILE GAUZE PADS, 2" X 2" STERILE GAUZE PADS, 3" X 3" STING RELIEF WIPES MEDICAL GLOVES, SYNTHETIC, (PAIR) TRAUMA PAD, 5" X 9", STERILE TRIANGULAR BANDAGE, NON–STERILE
25 PERSON
50 PERSON
75 PERSON
32 3 2 1 2 6 2 1 1 – 1 1 6 1 1 1 – 1 6 4 1 6 4 1 1
100 4 3 2 2 12 3 2 1 1 1 2 12 1 1 2 – 1 12 10 2 12 4 1 1
100 8 6 3 3 12 4 2 1 1 2 3 12 1 1 2 – 1 12 10 10 12 10 1 1
16 1 – 1 2 6 1 1 – – – – 6 1 1 1 3 1 6 4 1 6 4 1 1
* CPR MICROSHIELD® IS A REGISTERED TRADEMARK OF MEDICAL DEVICES INTERNATIONAL.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
227
© 2010 STEEL AND PIPES, INC.
PLASTIC BULK FIRST AID KITS
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS COMFORT MASK PART #
DESCRIPTION
PACKAGING
COMFORT MASKS RP1500 50 PER PACKAGE • Disposable Comfort Mask for protection against non-toxic dusts. Not NIOSH approved.
N95 RESPIRATORS PARTICULATE 95% MINIMUM FILTER EFFICIENCY PART #
DESCRIPTION
PACKAGING
N95 PARTICULATE RESPIRATOR 30 PER PACKAGE 6130N95 • This respirator provides protection from dust, mists and fumes at an economical price. The mask features a foam nose pad, nose clip for a better fit and latex free straps. Use in dusty environments that are free from oil based aerosols.
PART #
DESCRIPTION
7130N95 7130N95S
N95 PARTICULATE RESPIRATOR 20 PER PACKAGE N95 PARTICULATE RESPIRATOR(SMALL) 20 PER PACKAGE
PACKAGING
• North has designed and engineered this respirator to provide exceptional comfort and worker protection. It features a soft cushioned nose seal for added comfort and a curved nose clip for improved fit. The headstraps are latex free. The 7130N95 provides protection from solids and particulate aerosols free of oil, and is ideal for dusty environments such as grinding, sanding and sweeping. PART #
DESCRIPTION
PACKAGING
7140N95
N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE
10 PER PACKAGE
7140N95S
N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE(SMALL)
10 PER PACKAGE
• This respirator has the same features as the 7130N95, with the added benefit of a built in exhalation valve for cooler and easier breathing. The 7140N95 provides protection from solids and particulate aerosols of oil.
P95 PARTICULATE RESPIRATORS PART #
DESCRIPTION
95% TO 99.97% MINIMUM FILTER EFFICIENCY PACKAGING
7140N95 N95 PARTICULATE RESPIRATOR WITH EXHALATION VALVE 10 PER PACKAGE • Comfortable and durable, the 8140P95 features a foam-cushioned facepiece seal that conforms closely to the face for long lasting comfort and and protection, latex free, straps and a built-in exhalation valve for cooler and easier breathing. The 8140P95 provides protection from all particulates, and is ideal for machining and other dusty and oily operations. 95% minimum filter efficiency.
PI00 PARTICULATE RESPIRATORS © 2010 STEEL AND PIPES, INC.
PART #
DESCRIPTION
PACKAGING
P100 PARTICULATE RESPIRATOR WITH EXHALATION 5 PER PACKAGE VALVE, ADJUSTABLE STRAPS • The 8150PlOO provides PlOO protection without sacrificing comfort. A soft foam cushioned facepiece seal provides superior comfort and fit. Other features include a built-in exhalation valve and adjustable latex free straps The 8150PlOO filtering facepiece provides protection from all particulates, including those that contain oil based aerosols. 99.97% minimum filter efficiency. 8150P100
228
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
PVC PLUGS
FEATURES/BENEFITS
DECI DAMP 2™
NRR •Uncorded 29 dB •Corded 29 dB
• Expands to fit ear canal Maximizes wearer protection.
• Foam Construction One size fits most. Lightweight, soft and comfortable. Non-toxicand non-irritating,disposable.
• Sealed Pouches
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
Available in cellophane and degradable paper. Maximum cleanliness, assures employees that plugs are unused.
• Available with Cord
minimum s available.
More convenient to use, visible or safety checks
280006
282505
PART #
DESCRIPTION
PACKAGING
UNCORDED 280005 280005BP* 280019 282505
1 PAIR PER CELLOPHANE POUCH BULK PACK 5 PAIRS PER ZIP-LOCK BAG 1 PAIR PER DEGRADABLE PAPER POUCH
200 PAIRS/CARTON 500 PAIRS/CARTON 50 BAGS/CARTON 200 PAIRS/CARTON
CORDED 280006 280035
1 PAIR PER PLASTIC POUCH 1 PAIR PER DEGRADABLE PAPER POUCH
100 PAIRS/CARTON 100 PAIRS/CARTON
*Available in the U.S. Only
DECI 4200™
NRR •Uncorded 33dB •Corded 33dB
FEATURES/BENEFITS • Soft Polyurethane Foam
Expands to fit ear canal. Maximizes noise protection. Non-toxic and non-irritating, comfortable, flexible, easy to wear.
• Sealed Pouches Available in cellophane and degradable paper in uncorded only Minimizes contamination.
284240CO
• Available with Cord Visible for safety checks, reduces incidence of lost plugs
284200UO
DESCRIPTION
PACKAGING
1 PAIR PER CELLOPHANE POUCH BULK PACK 5 PAIRS PER ZIP-LOCK BAG 1 PAIR PER DEGRADABLE PAPER POUCH
200 PAIRS/CARTON 500 PAIRS/CARTON 50 BAGS/CARTON 200 PAIRS/CARTON
CORDED 280006 280035
1 PAIR PER PLASTIC POUCH 1 PAIR PER DEGRADABLE PAPER POUCH
100 PAIRS/CARTON 100 PAIRS/CARTON
*Available in the U.S. Only
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
229
© 2010 STEEL AND PIPES, INC.
PART #
UNCORDED 280005 280005BP* 280019 282505
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS MOSQUITO LIGHT DUTY PROTECTION
MUSTANG
Created for people who need good protection when exposed to intermittent harmful noises.
EM4155
EM4157
FEATURES
• No snag band - low profile for model EM4155 • Unique tension adjustability of EM4157 arms • Unique cup design • Good attenuation • Durable • Maximum comfort NRR NRR • Soft sealing cushions • EM4155 23dB • EM4157 20dB • Lightweight • Dielectric PART#
COLOR
HEAD BAND EARMUFF EM4155 BLUE
WEIGHT
BLUE
FEATURES/BENEFITS
•
• Ultra light • Good performance • Cups are made of styrene • Comfortable head band • Dielectric PART#
209G./7.4OZ.
CAP MOUNTED EARMUFF EM4157
EM3144
COLOR
HEAD BAND EARMUFF EM3144 BLACK
NRR 21dB
WEIGHT
148G./5.3OZ.
284G./9.3OZ.
REMEMBER!
We Can Repair And Fix Your Welding Machine Or Plasma Cutting Machines
© 2010 STEEL AND PIPES, INC.
• Repair • Parts • Service
230
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
MASK BP1002 SHOWN WITH 7700 SERIES HALF MASK AND 7581P100 CARTRIDGES
BP 1002 BACKPACK ADAPTER PART #
BP1002
DESCRIPTION
PACKAGING
BACKPACK ADAPTER*
1 PER PACKAGE
•The backpack adapter allows users to locate cartridges and filters out of the work zone, by placing them on the user's back. The BPlO02 is easily adaptable to all North Full Facepiece and Half Mask air-purifying respirators, simply by attaching it to the facepiece cartridge connectors. It is ideal for tight or highly heated work places such as those encountered in welding operations. Think of it as an extension cord for your cartridges.
7190N99 PARTICULATE RESPIRATOR
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
7190N99 PARTICULATE RESPIRATOR PART #
7190N99 719009N99
DESCRIPTION
N99 RESPIRATOR PARTICULATE REPLACEMENT FILTERS FOR 7190N99
PACKAGING
1 PER PACKAGE 2 PER PACKAGE
• For solids, such as welding fumes and non-oil particulates (99 % minimum filter efficiency). Fits easily under welding hoods. Replacement filters available.
*NOTE: Facepiece and Cartridges sold separately
FULL FACE PIECE WELDING RESPIRATORS 7600 SERIES FULL FACEPIECE PART #
Complete 760008AW Respirator
760008AW FULL FACEPIECE SHOWN WITH 7580P100 FILTERS
Attachment
DESCRIPTION
PACKAGING
7600 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (MEDIUM / LARGE)
1 PER PACKAGE
760008ASW 7600 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (SMALL)
1 PER PACKAGE
8404
WELDING ATTACHMENT ASSEMBLY FOR 7600 SERIES FULL FACEPIECE
1 PER PACKAGE
5400 SERIES FULL FACEPIECE
Attachment 54001 W FULL FACEPIECE SHOWN WITH 7580P100 FILTERS
DESCRIPTION
PACKAGING
5400 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (MEDIUM / LARGE)
1 PER PACKAGE
54001SW
5400 SERIES FULL FACEPIECE WITH WELDING ATTACHMENT (SMALL)
1 PER PACKAGE
8405
WELDING ATTACHMENT ASSEMBLY FOR 5400 SERIES FULL FACEPIECE
1 PER PACKAGE
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
231
© 2010 STEEL AND PIPES, INC.
PART #
Complete 54001W Respirator
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS GAS & VAPOR CARTRIDGES North offers an extensive line of gas and vapor cartridges and particulate filters to satisfy numerous industrial applications. All North cartridges and filters are approved with all North air-purifying half masks and full facepiece respirators. One line of cartridges and filters will simplify your inventory. Air-Purifying Respirators with cartridges provide respiratory protection against gases and vapors by using sorbents to purify the inhaled air. Cartridges without fllters do not remove dusts, fibers, and other particles. End of service life for gas and vapor cartridges is determined by either: • an end-of-service life indicator (ESLI) certified by NIOSH, or • the employer must implement a change schedule to ensure cartridges are changed before the end of their service life esLife: North has developed the esLife software program to help users develop cartridge change schedules for North gas and vapor cartridges. esLife is part of North's on-line ezGuide™ designed to aid users in determining the appropriate respiratory and hand protection product for their specific applications.
GAS & VAPOR CARTRIDGES AND COMBINATION GAS AND VAPOR CARTRIDGES WITH P100 PARTICULATE FILTERS PART#
75SC
75SCP100 N75001 7581P100 N75002 7582P100 N75004 7583P100
© 2010 STEEL AND PIPES, INC.
N75004
OLIVE
OLIVE/MAGENTA BLACK BLACK/MAGENTA WHITE WHITE/MAGENTA YELLOW YELLOW/MAGENTA GREEN
PACKAGING
DEFENDER'M MULTI-PURPOSE CARTRIDGE FOR ORGANIC VAPORS, CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN SULFIDE (ESCAPE), HYDROGEN FLUORIDE, CHLORINE DIOXIDE, AMMONIA, METHYLAMINE AND FORMALDEHYDE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) ORGANIC VAPOR CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN FIUORIDE, CHLORINE DIOXIDE, FORMALDEHYDE CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) ORGANIC VAPOR, (CHLORINE, HYDROGEN CHLORIDE, SULFUR DIOXIDE, HYDROGEN FIUORIDE, CHLORINE DIOXIDE CARTRIDGE ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY) AMMONIA, METHYLAMINE CARTRIDGE
7584P100
GREEN/MAGENTA
ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY)
N750052
OLIVE
MERCURY VAPOR, CHLORINE CARTRIDGE WITH END-OF SERVICE-LIFE INDICATOR (ESLI FOR MERCURY VAPOR)
OLIVE/MAGENTA
ABOVE WITH P100 PARTICULATE FILTER (99.97% MINIMUM FILTER EFFICIENCY)
75852P100
232
DESCRIPTION
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
AVAILABLE IN MULTIPLE PANELS
CLASSIC ROUND TUBE FRAME
Single Panel
Triple Panel
Double Panel
Quadruple Panel
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
PRODUCT INFORMATION Translucent Vinyl - This material is transluscent to provide passerby observability while offering protection from harmful rays and stray sparks. Three weights are available in various colors to suit your customers' needs. Vinyls are flame resistant and meet the requirements of CPAI-84 and California Fire Marshall CFM Registration No. F-209.
Vinyl Coated Polyester - This material is opaque for maximum eye protection. In addition, coated vinyls are more resistant against puncture and abrasion.
Canvas Duck - This material is opaque for maximum eye protection. Revco's 12 oz. duck is specially treated to meet flame-retardant requirements. Frame - Our frames are made of heavy gauge black powder coated piping. The eye-screw assembly design for the round frame and the snap-fit design of the QuickFrame requires no tools.
Custom Orders - Please call for a quotation on bulk custom orders. Roll Good - Materials are also available in rolls. Please call for a quotation.
ACCESSORY ITEM NUMBERS for Round Frame and QuickFrame ITEM NO.
DESCRIPTION
CS-S CS-D CS-T CS-Q GR HK TIE
CASTER ASSEMBLY SET FOR A SINGLE PANEL FRAME CASTER ASSEMBLY SET FOR A DOUBLE PANEL FRAME CASTER ASSEMBLY SET FOR A TRIPLE PANEL FRAME CASTER ASSEMBLY SET FOR A QUADRUPLE PANEL FRAME GROMMET CURTAIN HOOK(FITS PIPES UP TO 3/4”O.D.) PLASTIC TIE
14 MIL TRANSLUCENT VINYL ORA
YEL
BLU
GRN
Tough Sturdy Brass Grommets Plastic Ties
SH8 Curtain Hook
Casters for Mobility
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
233
© 2010 STEEL AND PIPES, INC.
QUICK FRAME
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS FOCUS PRODUCTS
N-VISION 5600™ SERIES
A totally new design with a sporty look, one-piece lens, 4A coating*, adjustable temples.Regular curved and straight end temples included. Available with universal comfort bridgeor Flexi-Fit 3-point non-slip nose piece. LENS
Clear Smoke Amber 477RL Clear Smoke 485RL
BLACK/GRAY FRAME
BLUE/GRAY FRAME
GRAY/BLACK FRAME
T56505B T56505BL T56505GRY T56505S T56505GRYS T56505BA T56505GRYA Replacement lens for N-Vision 5600 safety glasses with comfort bridge, clear T56555B T56555BL T56555GRY T56555BS T56555BLS T56555GRYS Replacement lens for N-Vision 5600 safety glasses with Flexi-Fit nose piece, clear
LIGHTNING™ SERIES
High base panoramic lens with Flexi-Fit 3-point non-slip nose piece and hugging flexible temples with soft ends. Rapid change lens replacement system, 4A coating*. PART #
T6500 T65005
DESCRIPTION
Black frame, clear lens Black frame, smoke lens
LIGHTNING PLUS™ SERIES
Panoramic lens for a wide unobstructed field of view, unique bowed temples, with Flexi-Fit soft nose piece. Comes in four exciting frame colors (Blue/Black frame not listed), 4A coating*. LENS
Clear Smoke
BLACK/BLUE FRAME
SILVER/BLACK FRAME
BRONZE/BLACK FRAME
T65505S T65505SS
T65505BR
T65505B T65505BS
TORNADO™ SERIES
One piece lens that gives the impression of a dual lens, with lens pivoting system, straight adjustable or curved temple available and 4A coating* LENS
BLACK/GRAY FRAME
BLUE/GRAY FRAME
GRAY/BLACK FRAME
Clear T57005B T57005BL T57005GRY Smoke T57005BS T57005BLS T57005GRYS T57005GRYA Amber T57005BA Mirror T57005BM T57005BLM T57005GRYM T58005B Black & gray frame, clear lens without lens pivoting system, straight adjustable temple and 4A coating.
© 2010 STEEL AND PIPES, INC.
SQUIRE™ SERIES
Frameless, one piece lens styling, curved adjustable temples. 3A coating** PART
T16055 T16055S
234
#DESCRIPTION
Black frame, clear lens Black frame, smoke lens
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
CP5002
CP5004
CP5007 CP5007SP
CP5005
CARRIERS HARD HAT SERIES CP5002 CP5004 CP5005 CP5006 CP5007 CP5007SP The Peak Short Peak The K2 Everest Summit Matterhorn
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS
CP5002, CP5004: Aluminum carriers “High Heat Resistant“ CP5005, CP5006: Plastic carriers made from Nylon CP5007, CP5007SP: Plastic carriers “Heat Resistant“
CP5006 FS01
VISORS PART#
FS03
DESCRIPTION
FS01 FS03
A8151
7” X 15 1/2” BLACK METAL SCREEN 7” X 15 1/2” BLACK METAL SCREEN WITH INTEGRATED ADAPTERS FV01 SUN VISOR FOR FS03 A8151 6” X 15 1/2” SPECIAL CLEAR FLAT DIE-CUT POLYCARBONATE .400MM VISOR WITH NOSE-CUT A8150/40 8” X 15 1/2” CLEAR FLAT DIE-CUT PET-G COPOLYESTER .40MM VISOR
FV01
EARMUFF REPLACEMENT PARTS PART#
A8150/40
HK50 HK100 HK200 HK250 HK300 HK400 HK500
PN1B0
NECK PROTECTOR PART#
DESCRIPTION
PNIB/0 NECK PROTECTOR, PVC/NYLON (ORANGE) PNIC/0 NECK PROTECTOR, FIRE RETARDANT (ORANGE) PNIE/0 NECK PROTECTOR, NOMEX® (ORANGE)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
235
© 2010 STEEL AND PIPES, INC.
EARMUFF REPLACEMENT PARTS
DESCRIPTION
NORTH HYGIENE KIT FOR MODELS: EM3144/EM6298 NORTH HYGIENE KIT FOR MODELS: EM4155/EM4157 EM4231/EM4232/EM4236 NORTH HYGIENE KIT FOR MODELS: EM1117/EM1281 EM1282/EM1286/EM2177/EM2262 / EM2266 NORTH HYGIENE KIT FOR MODEL: EM2175 NORTH HYGIENE KIT FOR MODEL: EM1115 NORTH HYGIENE KIT FOR MODELS: EM7197/EM7202 EM7206/EM7209 NORTH HYGIENE KIT FOR MODEL: EM7195
SAFETY EQUIPMENT DIVISION
SAFETY EQUIPMENTS Head, Face & Eye Protection
Most of Fibre-Metal’s welding helmets, faceshields, protective masks and welding goggles can be combined with protective headwear by utilizing any one of our three combination systems to provide the exact degree of protection and comfort required.
PROTECTIVE CAP/WELDING HELMET COMBINATIONS
5000 ADJUSTABLE SPEEDY® MOUNTING LOOP SYSTEM
• For frequent on/off use with protective caps. Welding helmets, faceshields, goggles, etc. may be mounted while the cap is on the head. No tools or modified caps required. (Does not affect ANSI rating.)
MODEL 4906
MODEL 5906
MODEL 6906
PROTECTIVE CAP/FACESHIELDS COMBINATIONS
4000 QUICK-LOK® SYSTEM
• For secure, long-term combination use. (4002) QUICK-LOK® mounting blocks are screwed onto the protective cap. Welding helmets, faceshields, goggles, etc. are equipped with (4001) QUICK-LOK® cups which can be securely mounted onto and removed from the cap - without tools.
6000 SLOTTED BLADE SYSTEM
• For use with most popular brands of slotted caps. Fibre-Metal protective wear that is equipped with our (4001) QUICK-LOK® mounting cups, can be mounted on slotted caps by simply adding our 6000 Slotted Cap Blades.
MODELF4400
MODELF6400
MODELF5400
PROTECTIVE CAP/WELDING GOGGLE COMBINATIONS
F4055
F6055
F5055
PEAK MOUNTED FACESHIELDS BRACKETS FOR USE WITH PROTECTIVE CAPS
CAP PEAK MOUNTED FACESHIELDS
© 2010 STEEL AND PIPES, INC.
• FM70 fully dielectric-mounting bracket provides a positive seal to keep debris from filtering between cap and shield. The shield may be pivoted above the cap between uses without removing the cap. Designed to fit on the front peak of our E2 and P2 caps. FM71 mounting bracket offers the same features as the FM70, but is designed for our full brim protective hats (E1 series). FH66 aluminum mounting bracket offers the same design and features as the FM70, but manufactured from extruded aluminum. Lightweight dual-channel bracket is designed to fit on the front peak of our E2 and P2 caps.
HIGH PERFORMANCE PROTECTIVE MASK • Radiant or blasts of heat are reduced without loss of
P2WCap FH66 Bracket 4199CL Window
E2RW Cap FM70 Bracket 4178TVGY Window
HIGH PERFORMANCE PROTECTIVE MASK 5621 Mask P2RW Fiberglass Hard Hat
ventilation or vision by stainless steel screen. Screen mounts to a lightweight fiberglass shell at eight points. Also available with .060 acetate window (622CL).
236
E1RW Fullbrim Hat FM71 Bracket 4178CLWindow
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SAFETY EQUIPMENT DIVISION
• For solids, such as welding fumes and non-oil particulates (99 % minimum filter efficiency). Fits easily under welding hoods. Replacement filters available.
SAFETY EQUIPMENTS
EXTENDED OR SHORT TERM PROTECTION TOP QUALITY PROTECTION FOR VIRTUALLY EVERY JOBSITE FACE HAZARD
Made from NORYL, the same material used in our welding helmets, HIGH PERFORMANCE faceshields are stronger, more durable and more heat resistant than ordinary faceshields. They contain our exclusive Channel Grip System, which mounts windows and locks them in place in a deep recessed channel to form a perfect seal from dust, dirt and debris. F300: Exceptionally lightweight and comfortable. Fits easily over today’s spectacles with space for air circulation to prevent fogging. Accommodates a full selection of standard size (8” x 111/2") windows. F400: Deeper 4” crown protector extends protection without increasing weight. Incorporates wide-vision (8" x 17") wraparound windows and screens which provide 40% more protective area than standard size faceshields. Fits easily over required spectacles or respirators. Available with choice of 3-C Headgear or three protective cap mounting mechanisms. F500: Broader, deeper 7" crown protector and wide wraparound window provides an extra margin of protection when harsh working conditions require it. Available with choice of 3-C Headgear or three protective cap mounting mechanisms.
MODEL F500
MODEL F400
MODEL F300
HIGH PERFORMANCE faceshields as designated are SEI certified to comply with current ANSI standards. SEI certification is your assurance of consistent quality and performance.
FACESHIELD WINDOWS STANDARD SIZE
WIDE VISION
4118
4178
NEW! Available in Clear and Dark Green Fits F300 Series
EXTENDED VIEW
4178IR/UV3 4178IR/UV5 4178IR/UV8
Also available in S178 Steel Screen, Dark Green and True Color Gray Fits F400, F500 Series, FH66, FM70 and F71 series
4199 S199 Steel Screen Also available in 4199 IR/UV3 NEW, IR/UV5, and Dark Green Fits F400 and F500 Series, and FH66.
Fibre-Metal faceshield windows are injection molded from propionate, which is superior to other window materials in every significant performance characteristic. They are preformed at the factory to the exact curve of our crown protectors for easy installation, an exact fit and a perfect seal against dust, dirt and debris. All HIGH PERFORMANCE windows are .060” thick for an extra margin of protection, yet they cost no more than ordinary .040” thick windows. Available in three sizes, in clear, special tints, shades 3, 5 and 8(4178 only). HIGH PERFORMANCE windows provide a degree of protection and a price point for every application and budget.
COMFORT ENHANCING SWEAT BANDS
FM-44T
FM-67
FM-66
FM-68
FM-20
Your choice of soft terry cloth (FM44T); shearing wool (FM66); soft-grain leather (FM67); soft, absorbent cotton (FM68), or air cushioned with velcro closure (FM20). Circulating air evaporates sweatband moisture for cooling effect.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
237
© 2010 STEEL AND PIPES, INC.
MODEL F500 W/ 4199GD
SAFETY EQUIPMENT DIVISION
WELDING PROTECTION
INSPECTORS’ HANDSHIELDS
Folding shields offer convenience and protection for inspectors, engineers, foremen and others who observe arc welding for short periods of time. Formed from quality leather. Folds to fit in pocket.
MODEL 870
PART #
MODEL 465 MODEL 465
PART #
MODEL 475
PART #
DESCRIPTION
2" X 4 1/4" STATIONARY GLASSHOLDER, SHIELD FOLDS TO 3½" x 6¼"
AUTO DARKENING WELDING HELMET PART #
DESCRIPTION
219.12.00202 AUTO DARKENING HELMET
DESCRIPTION
MODEL 870
2" X 4 1/4" STATIONARY GLASSHOLDER, SHIELD FOLDS TO 4 3/4" X 6 3/4"
MODEL 475
LEATHER WELDING HOODS
Top Quality, tough, flexible chrome leather hoods for use in hard to get to areas where there is no room for standard helmets. Lift front glassholder. Screened ventilation ports.
DESCRIPTION
WELDER CAN LIFT LID TO POSITION OR INSPECT WORK.
HIGH PERFORMANCE FILTER, SAFETY, COVER PLATES AND LENSES Full line of filter, safety and cover plates plus magnifiers. Includes top quality glass or plas-tic plates and lenses for virtually every metal fabrication application. Omni-View® Gold coated filters
Choice of glass or polycarbonate filters.
Polycarbonate safety plates, CR.39 cover plates.
© 2010 STEEL AND PIPES, INC.
WELDER’S IMAGE PROTECTIVE EYEWEAR Advanced designs provide all the welder requested features. Feather light, super strong frames, single high impact, scratch resistant lens. Contemporary, contoured styling fits comfortably under welding helmets. Available with shade 3.0 and 5.0 filter lens.
MODEL 2300N95
MODEL TW52N95
MODEL 7190N99
238
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SAFETY EQUIPMENT DIVISION
WELDING®HELMETS
SUPERGLAS FIBERGLASS WELDING HELMETS Reliable Heavy Duty Protection MODEL 880
PART #
706 606
DESCRIPTION
DESCRIPTION
880
WIDE VISION
• 24 square inches of unobstructed viewing area with Flash Barrier MODEL 710
• Molded-in glassholder, telescoping lid provides a seal against light leak.
Specially formulated SUPERGLAS® material and rugged construction meets the needs of the most demanding welding environments. Self-extinguishing, smooth helmets deflect sparks and spatter. Reinforced crown, throat and edges resist cracking. All operating parts can be easily and economically replaced to lower service life cost. Full size, curved bottom design accommodates OSHA required protective spectacles; respirators and hearing protection while blocking smoke and fumes. Also available in straight front style for extended throat and chest protection. A broad selection of sizes and styles provides a performance level and a price point for any process or application.
PART #
DESCRIPTION
710 610
STATIONARY STATIONARY (STRAIGHT STYLE)
• Economical, stationary glassholde with exclusive Flash Barrier
THE ORIGINAL PIPELINER: DESIGNED FOR THE SPECIFIC NEEDS OF PIPE WELDERS Molded from SUPERGLAS PLUS®, a material formulated for lightweight and strength, PIPELINER provides everything pipe welders need in a helmet to be safe and productive under the harshest welding conditions. Impervious to moisture, impact resistant PIPELINERS will not crack, chip or split. Compact design allows access to areas where there is no room for a standard helmet. Comfortable, functional headgear uses a constant-fit rubber headband for frequent re-adjustments as pipe welders move about their work. Also available with a ratchet headgear for use where space limitations are not as severe.
PIPELINER® STYLE (COLOR: WHITE) PART #
110P 110
EXCEPTIONAL COMFORT
As tough as SUPERGLAS® helmets are, they are easy on the welder. Extremely lightweight. Equipped with Fibre-Metal's classic 3-C free floating headgear that balances and stabilizes the helmet while providing multiple adjustments for individual fit, feel and a better view of the work. A well protected, comfortable welder stays on the job longer and produces more no matter how tough the job.
WIDE VISION
• 24 square inches of unobstructed viewing area with Flash Barrier
SUPERGLAS® SUPERGLAS® (STRAIGHT STYLE)
TOUGH HELMETS FOR TOUGH JOBS
DESCRIPTION
680
DESCRIPTION
(WITH RUBBER HEADBAND) (WITH RATCHET HEADGEAR)
PIPELINER® ADF (COLOR: WHITE) PART #
DESCRIPTION
110P FMP BM 10 (WITH RUBBER HEADBAND) • PIPELINER style helmet with HIGH PERFORMANCE auto darkeningshade 10 filter lens
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
239
© 2010 STEEL AND PIPES, INC.
MODEL 706
PART #
PART #
SAFETY EQUIPMENT DIVISION
AUTO-DARKENING WELDING HELMETS •Variable Shade 9-13. •COMPATIBLE WITH ANY STANDARD
4.5 x 5.25 PROTECTION PLATE PATRIOT
NASCAR®
HEAVY METAL™
STYLE
VISTA 1000
NASCAR®
PATRIOT
HEAVY METAL™
219.15.K2602-2
219.15.K2602-3
219.15.K2602-4
• Variable Sensitivity – TIG/Grind mode. • Variable Delay – Great for tacking and high amperage welding. • One of the industry's largest view sizes up to 32% larger than the competition! • Protects against harmful ultra-violet and infra-red light. • No on/off switches to remember. • Solar powered, no batteries to change, no alkaline corrosion. • 4 independent arc sensors. • Light to Dark in 1/10,000 second. • Low 5 amp TIG threshold.
SOLAR POWER
TRIBAL
SLOW RIDER
Continuously variable control
BLACK PATRIOT
• For shade and sensitivity. • 9-13 shade control. - 700G External - 750S • Sensitivity – Adjustable for different welding environments. • Delay – Adjustable from dark back to light state on 700G
Light weight STYLE
BLACK
TRIBAL
SLOW RIDER
VIKING 700GS
K2815-1
K2812-1
K2830-1
RED ROD
BLACK
CRUZIN STICKS
PATRIOT
PATRIOT
K2831-1
ARC ANGEL
• 700G - 18.3 (520) • 750S - 19 (539)
Grind mode
• Offered on all models • Great for weld prep or post-weld clean up activities.
Magnifying ‘cheater’ lens capable • On 700G
All Helmets Come With Great Bonus Items Valued at over $25 Including:
© 2010 STEEL AND PIPES, INC.
• Sport-pak style helmet bag • Lincoln Electric® bandana.
240
STYLE
BLACK
RED ROD
CRUZIN STICKS
PATRIOT
ARC ANGEL
VIKING 750GS
K2836-1
K2834-1
K2835-1
K28431-1
K2833-1
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Great Bonus Items!
SAFETY EQUIPMENT DIVISION
AUTO-DARKENING WELDING HELMETS
RF55300
TRIBAL ELECTRONIC HOOD
RF55301
FIRESTARTER ELECTRONIC HOOD
RF55303
AND BEYOND ELECTRONIC HOOD
RF55309
PUERTO RICO ELECTRONIC HOOD
RF55300
RF55301
RF55303
RF55309
219.15.RF55300
219.15.RF55301
219.15.RF55303
219.15.RF55309
• Easy to use • Visibility Area: 98 x 48 mm, 92 x 42 mm • Variable Shade 9-13 • Light to Dark in 1/25.000 second. • Face and Neck Proteccion • UV/IR protection •No on/off switches to remember. •Solar powered, no batteries to change, no alkaline corrosion. •Standards met CE, ANSI Z87.1 and AS/NZS 1338.1 •Weight- Very Light
Rent Welding Machines! • Innovative Solutions. • Performance and Reliability “Extreme Duty™” • Full range of rental welding machines. • Cost Effective.
Red-D-Arc Welderentals
We are your Industrial Supermarket • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
241
© 2010 STEEL AND PIPES, INC.
We are the only representatives in Puerto Rico.
HOY
O R E R R E H L CLUB DE tros productos:
s e u n s o d o t n e o t n e 5 %* de descu IN CHAMBERLA
®
________
_______ _ _ _ _ _ _ _ _ _ _ _ _ ______
__________
_ Nombre_______
___
________ _ _ _ _ _ _ _ # io c o S
_________
______ _ _ _ _ _ _ _ ._ p x E __Fecha
cans no aplican a merizada. to en cu es D o. nt ue aplicar el desc ningún grosor sea negra o galvan recompra para poder ría co la 2 de cancía de to en om m n, tube 1x1 y 1x tos aplican a meron tada al ió en en cc , cu es tru pr es r ns D . se co H be de AT de o la , varil , MC stricci es aplican s” sa re Vi lin *La tarjeta s ur o, rta “p tiv ie ”, C ec ef ck o. is de en av r al et nta tiene que se elar estos descuentos sin previo cía en especial, “m o sea válido la ve nt ue sc de canc de el e qu Para amos el derechorje rv se re os N . al rs jida en la sucu ndiciones al dorso de esta ta ta. ver términos y co
Ahora en productos: CHAMBERLAIN
®
RENTAL EQUIPMENT
DIVISION
RENTAL DIVISION
GASOLINE ENGINE-DRIVEN WELDERS
EQUIPMENT SELECTOR
GX200 2+4 Welder Generator
DC CC 4kW
FUEL EFFICIENT LOW NOISE LEVEL 4,000 WATT AC GENERATOR AVAILABLE WITH ELECTRIC START 11HP GX340 HONDA GASOLINE ENGINE Exceptionally smooth output from the brushless, a synchronous alternator provides excellent welding arc characteristics and arc striking voltage. Lightweight and portable with auxiliary power available, even while welding. SPECIFICATIONS
DC AMPERAGE RANGE:
40 - 200 A
RATED OUTPUT:
200 A AT 23 VDC, 35% DUTY CYCLE 170 A AT 23 VDC, 60% DUTY CYCLE
AUXILIARY POWER:
4,000 WATTS, 60 HZ, 100% DUTY CYCLE ON 240 VAC 2,000 WATTS, 60 HZ, 100% DUTY CYCLE ON 120 VAC
WEIGHT:
219 LB (99.3 KG) PULL START, 230 LB (104.3 KG) WITH ELECTRIC START
DIMENSIONS:
H: 20" (508 MM) W: 19.25" (489 MM) L: 30.5" (775 MM)
OPTIONS • Shop-type undercarriage
DIESEL ENGINE-DRIVEN WELDERS
D300K 3+3 Welder
DC CC 3kW STICK WELDING WITH FIVE OUTPUT TAPS AND FINE CURRENT CONTROL BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS FUEL EFFICIENT V1903 KUBOTA DIESEL ENGINE3,000 WATTS AC AUXILIARY POWER The pure DC generator with all copper coils provides excellent welding characteristics. The welder’s choice for pipeline welding and general construction work. Constant speed engine for instant arc starting.The V1903 Kubota diesel engine provides reliable, efficient operation in even the most severe conditions.
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
DC AMPERAGE RANGE:
40 - 350 A
RATED OUTPUT:
300 A AT 32 VDC, 60% DUTY CYCLE 250 A AT 30 VDC, 100% DUTY CYCLE
MAXIMUM OCV: 98
AUXILIARY POWER:
3,000 WATTS, 60 HZ, 15 AMPS WITH CIRCUIT BREAKER AND GFCI RECEPTACLE
WEIGHT:
1434 LB (650.5 KG)
FUEL CAPACITY:
15 GALLONS (57 L)
FUEL CONSUMPTION:
0.44 GPH (1.65 LPH)
DIMENSIONS:
H: 20" (508 MM) W: 19.25" (489 MM) L: 30.5" (775 MM)
OPTIONS • Construction trailer • RC4 remote control • TIG welding with K930-2 TIG module • 240 VAC auxiliary power.
244
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
EQUIPMENT SELECTOR
D500K 5+3 Welder
DC CC 3kW
FULL RANGE AMPERAGE CONTROL AND JOB SELECTOR (OCV) CONTROLBUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS FUEL EFFICIENT KUBOTA F-2803 DIESEL ENGINE 3,000 WATTS AC AUXILIARY POWER
RENTAL DIVISION
DIESEL ENGINE-DRIVEN WELDERS
For demanding jobs that call for high amperage capabilities using electrodes up to 1/4" in diameter and air carbon arc (CAC-A) gouging with carbons up to 5/16"in diameter. Precise control of both current control and open circuit voltage for optimum arc characteristics. SPECIFICATIONS
OPTIONS • Construction trailer • RC4 remote control • TIG welding with K930-2 TIG module • 240 VAC auxiliary power.
DC AMPERAGE RANGE:
50 - 575 A
RATED OUTPUT:
400 A AT 36 VDC, 60% DUTY CYCLE 350 A AT 34 VDC, 100% DUTY CYCLE
AUXILIARY POWER:
3,000 WATTS, 60 HZ, 15 AMPS WITH CIRCUIT BREAKER
WEIGHT:
1866 LB (846.4 KG)
FUEL CAPACITY:
15 GALLONS (57 L)
FUEL CONSUMPTION:
1.79 GPH (6.78 LPH) AT RATED LOAD
DIMENSIONS:
H: 44.25" (1124 MM) W: 27" (686 MM) L: 73.5" (1867 MM)
DIESEL ENGINE-DRIVEN WELDERS
D302K 3+12 Welder
DC CC CV 12kW STICK, MIG, LIFT-ARC DC TIG, FLUX-CORED WELDING AND AIR CARBON ARC GOUGING BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS KUBOTA V1505-E2BG1, TIER 2, 20.2 HP LIQUID-COOLED DIESEL ENGINE12,000 WATTS PEAK, 10,000 WATTS CONTINUOUS 120/240 VAC POWER The 3+12 is a constant current/constant voltage, DC diesel engine-driven welder with a high-efficiency, three-phase welding generator that requires less fuel but has enough power for gouging with up to 1/4" carbons. Output adjustment is via a potentiometer-type, full-range, Amperage/Voltage Adjust Control and a six-range Process/Contactor Control switch which includes four arc-drive (dig) settings in Stick mode. Remote contactor control, as well as remote amperage and voltage control, are via 3-pin and 14-pin MS-style receptacles on the front panel. SPECIFICATIONS
DC AMPERAGE RANGE:
20 - 410 A
DC VOLTAGE RANGE:
14 - 40 V
MAXIMUM OCV: 65
RATED OUTPUT:
300 A AT 32 VDC, 60% DUTY CYCLE 400 A AT 23 VDC, 30% DUTY CYCLE
AUXILIARY POWER:
SINGLE-PHASE GENERATOR POWER PEAK: 12,000 WATTS CONTINUOUS: 10,000 WATTS 83/42 A, 120 GFCI/240 VAC, 60 HZ
WEIGHT:
1200 LB (544 KG)
FUEL CAPACITY:
11.5 GALLONS (43.5 L)
DIMENSIONS:
H: 32" (813 MM) W: 26" (660 MM) L: 56" (1422 MM)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
245
© 2010 STEEL AND PIPES, INC.
NEW!
MAXIMUM OCV: 97
RENTAL DIVISION
STICK WELDERS AND PACKS
Multioperator System
EQUIPMENT SELECTOR
PROCESSES Stick, DC TIG with Touch-Start
ES275i 4Pak
DESCRIPTION 275 amp at 35% duty cycle, constant current, DC, inverter welder with 1/3 phase, 50/60 Hz input INPUT VOLTAGES: • Individual Welders: 208/230/460/575/1/3/60 220/380/400/415/440/1/3/50 • 4Pak and 8Pak Multioperator: 460/575/3/60 CONFIGURATIONS Available as individual welders and 4Pak or 8Pak Multioperator welding systems. 4Paks include either insulated bases or carts with casters. 8Paks include bases with optional, add-on casters. 4Pak mounts on either an insulated base or a cart with casters for easy moving OPERATION • Stick and TIG Weld Modes • Output Control controls the output current over the entire output range and can be adjusted under load. When using remote control this function becomes the limit setting • Arc Force is only active in Stick weld mode • Hot Start is only active in Stick weld mode and is fixed at 160% of the set current or 275 amps whichever is larger then quickly reverts to the set current in 0.4 seconds • Voltage reconnect is via a side panel access door • Remote Control is via a 3-pin MS-style receptacle
FEATURES • Outstanding E6010 and E7018 performance using up to 7/32" diameter electrodes that enables both whip or drag techniques for a variety of applications • Touch-Start TIGallows DCTIG welding without high frequency starting • Adjustable Arc Force and two-position Hot Start switch for enhanced arc control • Potentiometer-type remote control • Light-weight and compact design • No output derating when operated on single-phase power • Meets IP23S environmental rating • Extreme-Duty environmental protection • Manufactured under ISO 9001 certification • 4Pak and 8Pak are small enough to fit through a 36" wide pedestrian door • Tweco style output terminals • 10' long, 8 AWGinput cord for all 3 phase voltages • Optional Primary Ground Protector available for 4Pak and 8Pak
PORTABLE SMOKE EXTRACTORS
SE1602W Smoke Extractor TWO OPERATING SPEEDS RSE200WF REUSABLE, WASHABLE FILTER STAINLESS STEEL CONSTRUCTION Filter can be blown out with air or washed and precoated. Dual bypass motors. Includes 15' hose with magnetic locator.
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
WEIGHT: INPUT: CAPACITY: DIMENSIONS:
246
42 LB (19 KG) 120 VAC 160 CFM H: 13.75" (349 MM) W: 10.75" (273 MM) L: 28.75" (730 MM)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
EQUIPMENT SELECTOR
Multioperator System
ES275i 8Pak WEIGHTS AND DIMENSIONS ES275i
RENTAL DIVISION
STICK WELDERS AND PACKS
Weight: 54.5 lb (24.7 kg) H: 13.6" (345 mm) W: 9.0" (229 mm) D: 20.25" (514 mm)
ES275i 4Pak (on cart with casters) Weight: 480 lb (217.7 kg) H:44.5" (1130 mm) W: 31" (787 mm) D: 35.75" (908 mm)
ES275i 8Pak (on insulated base with casters) Weight: 987 lb (447.7 kg) H: 46.75" (1187 mm) W: 60" (1524 mm) D: 27.5" (699 mm)
Shown with optional casters
SPECIFICATIONS (INDIVIDUAL WELDERS) INPUT POWER
RATED OUTPUT
INPUT CURRENT AT RATED OUTPUT
OUTPUT RANGE
208/230/460/575/3/60
275 AMPS, 31 VOLTS, 35% 250 AMPS, 30 VOLTS, 60% 200 AMPS, 28 VOLTS, 100%
38/37/19/16 34/33/17/14 27/25/13/11
5 - 275 AMPS DC
208/230/460/575/1/60
275 AMPS, 29-31 VOLTS, 35% 250 AMPS, 30 VOLTS, 60% 200 AMPS, 28 VOLTS, 100%
68/67/38/31 63/62/33/27 49/48/26/21
220/380/400/415/440/3/50
250 AMPS, 30 VOLTS, 35% 200 AMPS, 28 VOLTS, 100%
32/20/19/18/17 25/15/15/14/13
220/380/400/415/440/1/50
250 AMPS, 30 VOLTS, 35% 200 AMPS, 28 VOLTS, 100%
63/42/40/38/36 48/32/30/29/27
Mark VIII-2
5 - 250 AMPS DC
DC CC 2kW STICK (SMAW) AND DC TIG (GTAW) WELDINGAIR CARBON ARC CUTTING AND GOUGING (CAC-A)FLUX-CORED (FCAW), MIG WELDING WITH VOLTAGE-SENSING WIREFEEDERS This multioperator welding system drives eight modules from a single main transformer. Each welding module features remote control and a wide range of amperage settings. DC AMPERAGE RANGE:
SINGLE MODULE: 35 - 300 A
MAIN TRANSFORMER:
800 A, 100% DUTY CYCLE OR 1600 A, 25% DUTY CYCLE SINGLE MODULE: 200 A, 60% DUTY CYCLE 230/460/575 V MAXIMUM OCV: 80 230V 460V 575V KVA KW 170 A 85 A 68 A 68 A 48.6 A 4050 LB (1837 KG) H: 70.25" (1784 MM) W: 72" (1829 MM) D: 40" (1016 MM)
RATED OUTPUT AT 40 VOLTS: INPUT VOLTAGES: INPUT AT RATED OUTPUT: WEIGHT:
OPTIONS
• RHC3 Remote Control • HF251D Arc Starter
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
247
© 2010 STEEL AND PIPES, INC.
SPECIFICATIONS
RENTAL DIVISION
MULTIPROCESS POWER SOURCES
EQUIPMENT SELECTOR
EXtreme 360 Inverter Welder
DC CC CV
STICK, MIG, TIG, FLUX-CORED WELDING PROCESSES PULSED MIG CAPABILITIES WITH OPTIONAL OPTIMA CONTROL BUILT TO RED-D-ARC EXTREME-DUTY SPECIFICATIONS AVAILABLE AS 4PAK AND 8PAK MULTIOPERATOR SYSTEMS DESCRIPTION 350 amp at 60% duty cycle, constant current/constant voltage, DC inverter welder. Standard features include Auto-Line, Ammeter and Voltmeter, adjustable Arc Control, full Remote Control capability and Extreme-Duty construction. VOLTAGE INPUT Individual Units: Auto-Line Power Management Technology allows for operationwith any type of primary power from 208 to 575 VAC, single- or three-phase, 50 or 60 hertz with no manual linking required - ideal for dirty or unreliable power. 4Pak and 8Pak Multioperator units include DP120 panels and operate with 460/575/3/60 input power. FEATURES Wind Tunnel Technology protects electrical components and PC boards from contamination. Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and amount of contaminents pulled through the machine. Lift-Arc allows TIGstarting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten. Adaptive Hot Start increases the output amperage at the start of the weld if necessary, eliminating electrode sticking. Inverter arc control provides greater puddle control for superior electrode performance. Line voltage compensation keeps power constant even if power input varies by ± 10% on 575 volt power and +37%/-59% on 460 voltpower. Process selector switch reduces the number of control setup combinationswithout reducing any features. Large, dual digital meters are easy to view and presettable to ease setting weld output. Pulsed MIGcapabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission. Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight. Optional 114 VAC auxiliary power is available.
NEW!
INPUT POWER
RATED OUTPUT AT 60% DUTY CYCLE
Three-Phase Single-Phase
350 A at 34 VDC 300 A at 32 VDC
VOLTAGE RANGE IN CV MODE
10 - 38 V 10 - 38 V
AMPERAGE RANGE MAX. OPENIN CC MODE CIRCUIT VOLTAGE
5 - 425 A 5 - 425 A
75 VDC 75 VDC
© 2010 STEEL AND PIPES, INC.
EXTREME 360 4PAK AND 8PAK MULTIOPERATOR SYSTEMS These Paks are easily maneuvered around most jobsites when mounted on the optional wheel kit. Excellent stick welding performance with up to 425 DC amps per arc combined with the features of a high-end MIG machine make this a very versatile system.
248
EXTREME360 SPECIFICATIONS
4PAK SPECIFICATIONS
8PAK SPECIFICATIONS
Weight: 80 lb (36.3 kg) H: 17" (432 mm)) W: 12.5" (318 mm) D: 24" (610 mm) Input Power: 208-575/1/3/50/60
Weight: 700 lb (320 kg) H: 54.5" (1384 mm) W: 31.5" (800 mm) D: 32" (813 mm) Input Power: 460/575/3/50/60
Weight: 1400 lb (640 kg) H: 109" (2768 mm) W: 63" (1600 mm) D: 64" (1626 mm Input Power: 460/575/3/50/60
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
LN25 Portable Wirefeeder
EQUIPMENT SELECTOR
DC CV CC
CONTROL CABLE NOT REQUIRED OPERATES OFF WELDER ARC VOLTAGE FOR MIG AND FLUX-CORED WELDING MAXIMUM VERSATILITY AND PORTABILITY
RENTAL DIVISION
WIREFEEDERS
This wirefeeder operates off arc voltage with a voltage sensing control circuit so a control cable is not required. To operate, simply connect the welding cable from the power source, attach the work clip and you’re ready to weld. Includes a voltmeter, a gas solenoid, and an internal contactor. Can be operated with all electric and engine-driven welders with CV capability but can also be used with CC welders for non-critical welds. The LN25 provides constant wire feed speed for use with CV power sources and arc-sensing wire feed speed for CC power sources and will handle weld currents up to 300 amps at 60% duty cycle. For MIG and flux-cored arc welding processes using from 10 lb to 44 lb wire spools. Specify wire size and type for correct drive roll selection. SPECIFICATIONS
WELD CURRENT CAPACITY:
AIR: 250 A AT 100% DUTY CYCLE WATER: 400 A AT 100% DUTY CYCLE WIRE FEED SPEED: 70 - 875 IPM (1.8 - 22.2 M/MIN) WIRE DIAMETER CAPACITY: .030 - 1/16" ALUMINUM WIRE MAXIMUM SPOOL SIZE CAPACITY: 12" (305 MM) INPUT POWER: 24 VAC, 50/60 OR 100 HZ H: 16" (406 MM), W: 9.25" (235 MM), L: 21.25" (540 MM) XR-CONTROL DIMENSIONS: XR-CONTROL WEIGHT: 38 LB (17.2 KG)
SPOOL GUNS
XR-Control with XR-A or XR-W Edge Gun MIG ALUMINUM AND SOFT ALLOY PROCESSESXR-A AIRCOOLED AND XR-W WATER-COOLED GUN VERSIONSFOR .030" THRU 1/16" ALUMINUM WIRE SIZES 15', 30' AND 50' GUNS The XR push-pull wire feed systems offer the choice of air- or water-cooled MIG guns for truly customized systems for particular applications. Standard digital wire feed speed and volt meters provide easy indication and control of weld parameters. Unique solid-state control circuit permits XR systems to operate with most CC, CV or CC/CV DC welding power sources. True push-pull design provides continuous torque to wire. Gun motor controls actual wire feed speed at arc. Each motor works in concert to provide accurate and positive wire feed speed. Master/gun wire feed speed control improves improves arc starting resolution by limiting speed range at the gun. Adjustable wire run-in control Gun rotates 360 degrees for various welding positions, reducing fatigue. SPECIFICATIONS
AIR: 250 A AT 100% DUTY CYCLE WATER: 400 A AT 100% DUTY CYCLE WIRE FEED SPEED: 70 - 875 IPM (1.8 - 22.2 M/MIN) WIRE DIAMETER CAPACITY: .030 - 1/16" ALUMINUM WIRE MAXIMUM SPOOL SIZE CAPACITY: 12" (305 MM) INPUT POWER: 24 VAC, 50/60 OR 100 HZ H: 16" (406 MM), W: 9.25" (235 MM), L: 21.25" (540 MM) XR-CONTROL DIMENSIONS: XR-CONTROL WEIGHT: 38 LB (17.2 KG)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
249
© 2010 STEEL AND PIPES, INC.
WELD CURRENT CAPACITY:
RENTAL DIVISION
TIG WELDERS
EQUIPMENT SELECTOR
SYNCROWAVE 350 LX
AC DC CC 1 Phase Input OUTPUT RANGE OF 4 TO 400 AMPS CONSTANT CURRENT SQUAREWAVE TECHNOLOGYSTICK (SMAW), AC/DC TIG (GTAW), PULSED TIG (GTAW-P) WELDING An exceptional single-phase TIG/Stick power source designed for the master welding craftsman. Delivers up to 400 amps of welding current. User friendly front panel with easy-to-use push buttons for process set-up. Includes pulser with preflow and post flow settings. Also available with an optional TIG sequencer. Lift-Arc circuit allows DC TIGstarting without the use of high frequency. Balance/Dig controls, Pulser, Memory recall and digital volt and amp meters are included. Optional equipment includes start time/spot time control, crater time control, sequence selection switch, start and final current control. Available with running gear, coolant system for water-cooled TIG applications and a variety of foot and hand remote controls. SPECIFICATIONS
WELDING AMPERAGE RANGE:
3 - 400 A
RATED OUTPUT:
350 A, 34 V AT 40% DUTY CYCLE
MAXIMUM OCV: 80 V
INPUT CURRENT AT RATED-LOAD: 150 A AT 200 VAC, 131 A AT 230 VAC, 66 A AT 460 VAC, 53 A AT 575 VAC
Shown with Cool Runner 3X coolant system and remote foot control
RATED OUTPUT:
300 A, 32 V AT 60% DUTY CYCLE 129 A AT 200 VAC, 112 A AT 230 VAC, 56 A AT 460 VAC, 45 A AT 575 VAC
WEIGHT:
355 LB (161 KG) H: 37.875" (962 MM) W: 22.875" (581 MM) L: 25.25" (641 MM)
PLASMA CUTTERS (PAC)
PYTHON Plasma Cutter
CC DC PRODUCTION CUTTING CAPACITY 3/4" AT 18 IPM RECOMMENDED CUTTING CAPACITY 1" AT 11 IPM MAXIMUM CUTTING CAPACITY 1 1/4" AT 7 IPM Has the same features as the Viper plasma cutter with 80 amps of power for world class cutting performance up to 1" in only a 95 lb package. The patent-pending PCT80 hand plasma torch is included and a machine torch and robotic torch are also available. CNC/Robotic interface is standard. The standard PCT80 hand torch uses only 3 consumable parts and is also used with the Viper plasma cutter. SPECIFICATIONS
RATED OUTPUT: PILOT CURRENT: AIR PRESSURE REQUIRED: © 2010 STEEL AND PIPES, INC.
INPUT VOLTAGE:
OPTIONS • Machine Torch, w/25' leads • K1571-3 Robotic Torch, w/25' leads • K1571-5 Combination Circle Cutting Kit • K1625-1 Valet-Style Undercarriage • K1838-1
250
WEIGHT INCLUDING UNDERCARRIAGE:
80 A AT 60% DUTY CYCLE, 65 A AT 100% DUTY CYCLE 18 A CURRENT RANGE: 35 - 85 A 70 PSI FLOW RATE: 400 CFH K1581-6 208V/230V/460V/1/3PH/50/60HZ K1581-5 460V/575V/3PH/50/60HZ 145 LB (65.8 KG) H: 23.5" (597 MM) W: 17" (432 MM) L: 32" (813 MM)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL GASES DIVISION
INDUSTRIAL GASES DIVISION
INDUTRIAL GASES DIVISION
INDUSTRIAL GASES
Type of Gases
© 2010 STEEL AND PIPES, INC.
• Oxygen (O2) • Acetylene • Argon • Nitrogen • Argon mixture 75% and CO2 25% • Industrial gases • Carbon dioxide
252
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com Email: www.steelandpipes.com
Oxygen (O2) Code: SP-20 Type of Valve: 540 Weight: 13 lbs. Dimensions: 5.25” O.D./ 13.75” Tall
Code: SP-40 Type of Valve: 540 Weight: 22 lbs. Dimensions: 7” O.D./ 17.50” Tall
Code: SM-125 Type of Valve: 540 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall
Code: ST-300 Type of Valve: 540 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall
Code: SA-40 Type of Valve: 520 Weight: 23 lbs. Dimensions: 7” O.D./ 23” Tall
Code: SA-145 Type of Valve: 300 Weight: 74 lbs. Dimensions: 8.25” O.D./ 40” Tall
Code: SA-390 Type of Valve: 300 Weight: 169 lbs. Dimensions: 12.25” O.D./ 46.25” Tall
Code: SP-40 Type of Valve: 580 Weight: 22 lbs. Dimensions: 7” O.D./ 17.50” Tall
Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall
Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall
Code: SCO-20 Type of Valve: 320 Weight: 34 lbs. Dimensions: 7.75” O.D./ 25” Tall
Code: SCO-50 Type of Valve: 320 Weight: 109 lbs. Dimensions: 9” O.D./ 45” Tall
Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall
Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall
Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall
Code: SK-224 Type of Valve: 580 Weight: 113 lbs. Dimensions: 9” O.D./ 51” Tall
Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall
Code: SP-20 Type of Valve: 580 Weight: 13 lbs. Dimensions: 5.25” O.D./ 13.75” Tall
Code: SM-125 Type of Valve: 580 Weight: 60 lbs. Dimensions: 7” O.D./ 43” Tall
Code: ST-300 Type of Valve: 580 Weight: 140 lbs. Dimensions: 9.25” O.D./ 55” Tall
INDUSTRIAL GASES DIVISION
Type of Gases
is identified with the color blue
Acetylene
Code: SA-10 Type of Valve: 200 Weight: 7.5 lbs. Dimensions: 4” O.D./ 15” Tall is identified with the color red
Argon
is identified with the color green
Carbon dioxide
is identified with the color black
Argon mixture 75% and CO2 25%
is identified with the color brown
Industrial Helium
is identified with the color purple
is identified with the color white
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
253
© 2010 STEEL AND PIPES, INC.
Nitrogen
STEEL AND PIPES
FABRICATORS & MANUFACTURING, INC. • Structural Steel Fabricators & Erectors • Miscellaneous Metal Fabricators • Pre-Engineered Metal Exclusive distributor Buildings for Puerto Rico and the Caribbean
• Stainless Steel Railings • Bolted Steel Tanks
T. (787) 747-9415 / 9416 • F. (787) 747-8986 / 8987 Km 27.5 Road #1, Rio Cañas, Caguas, P.R. 00726 www.steelandpipes.com
PAINTS
DIVISION
PAINTS DIVISION
RECTANGULAR TUBING TYPES OF CORROSION
ONE OF THE MOST IMPORTANT ASPECTS OF METAL SURFACE PROTECTION, IS AN ADEQUATE CLEANING AND PREPARATION OF THE SUBSTRATE PRIOR TO PAINTING; IN ORDER TO PROVIDE SUITABLE ANCHORAGE FOR COATINGS. New metal surfaces (virtually intact): thorough cleaning of the surface with a degreaser, afterwards applying one coat of anticorrosive primer and two coats of finish Metal surfaces where corrosion process has begun: thorough cleaning of the surface with a degreaser, using a wire-brush or sandpaper on areas where rust is present. Apply one coat of anticorrosive primer and two coats of finish. Metal surfaces with advances corrosion: deep cleaning using power tools such as sandblas ting and grinding. Apply one coat of anticorrosive primer and two coats of finish.
GUIDE OF PRODUCTS
METALLIC FINISH FAST DRY ENAMEL
© 2010 STEEL AND PIPES, INC.
Modified alkyd resins specially formulated to improve glossiness, drying, and resistance to outdoor conditions. Excellent for surfaces near marine environments. ITEM NUMBER
DESCRIPTION
650.A.423 650.A.400 650.24115 650.7055 650.A.4067 650.A.401
FAST DRY GLOSS BLACK (GAL) FAST DRY GLOSS WHITE (GAL) FAST DRY ENAMEL YELLOW (GAL) FAST DRY PRIMER GRAY GAL FAST DRY PRIMER WHITE GAL FAST DRY WHITE PAINT (PAILA)
256
A revolutionary new concept in protection for metals. It is a self-priming finish, with great coverage, in an eggshell, antique finish. This product is ideal for gates, fences, and any form of decorative iron. ITEM NUMBER
DESCRIPTION
650.A.845 650.A.846Q 650.A.847 650.A.847Q 650.A.607 650.A.607Q 650.A.665 650.A.815 650.A.815Q 650.A.700
METALLIC COPPER 845 GAL METALLIC COPPER 845 QUART METALLIC GOLD 847 GAL METALLIC GOLD 847 QUART METALLIC GREEN DARK 607 GAL METALLIC GREEN DARK 607 QUART METALLIC GREEN OXIDE 665 GAL METALLIC ZINC 815 GAL METALLIC ZINC 815 QUART METALLIC BLACK 700 GAL
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
PAINTS DIVISION ANTIRUST ACRYL COAT
A new concept in coating for galvanized iron, blends innovative components that make it far superior to other conventional anticorrosive acrylic products. When applying on black iron or carbon steel, use of an alkyd primer is required. This product prevents mildew growth as well. ITEM NUMBER
650.A.000
DESCRIPTION
ZINC PHOSPHATE
Alkyd primer for use in circumstances where a metal protection system of the highest is needed. ITEM NUMBER
650.A.410 650.A.411
DESCRIPTION
ZINC PHOSPHATE PRIMER (GAL) WHITE ZINC PHOSPHATE PRIMER GAL GRAY
ANTIRUST ACRYL COAT H.G. WHITE (GAL)
RED OXIDE CROMOIL FLAT
Premium, flat, alkyd finish formula, that offers high resistance to washing, superior performance, great coverage, and notably less odors during application; for indoor and outdoor use. ITEM NUMBER
650.35934
DESCRIPTION
CROMOIL FLAT BLACK (GAL)
Alkyd primer for use in circumstances where a metal protection system of the highest is needed. ITEM NUMBER
650.39111 650.39112 650.39110 650.39114 650.39113
DESCRIPTION
RED OXIDE (GAL) RED OXIDE (PAIL) RED OXIDE (QUART) RED OXIDE WATER BASE (GAL) RED OXIDE(PAIL) WATER-LATEX
ANTIRUST ENAMEL
Alkyd resins finish, specially formulated for high resistance to exteriors and interiors; high gloss, and available in many colors.
650.7050 650.A.403 650.A.403Q
Alkyd primer for use in circumstances where a metal protection system of the highest is needed.
DESCRIPTION
ANTIRUST ENAMEL DORADO (QT) ANTIRUST ENAMEL OLD SAN JUAN (GAL) ANTIRUST ENAMEL OLD SAN JUAN (QT)
ITEM NUMBER
650.39109 650.35930
DESCRIPTION
GREEN OXIDE (QUART) GREEN OXIDE PRIMER GAL
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
257
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
GREEN OXIDE
PAINTS DIVISION
ZINC GALVANIZING SPRAY COATING
Spray Galvanize 309 produces a cathodic coating that will stop corrosion on ferrous surfaces. The coating is equal to hot dip galvanizing in protection, film durability and protection against corrosion action of salt. a light coating of SPRAY GALV 309 uder a coat of paint prevents corrosive action.
RUS-KIL BLP COLD GALVANIZE
BLP RUS-KIL Cold Galvanize is a high quality, fast drying coating for touch up and repair of galvanized surfaces. This product is good for repairing “weld seams” and damaged areas on gates, piping and structural steel trailers or most galvanized surfaces. • Effective at preventing rust & corrosion. • Provides up to 3 years of protection. • Fast drying. Fast recoat • Several thin coats provides better coat than one heavy coat. • Excellent resistance to dry heat. ITEM NUMBER
650.7040 650.7035
ITEM NUMBER
650.7030
DESCRIPTION
COLD GALV SPRAY (12 OZ)
CROMOX PAINT THINNER
CROMOX Paint Thinner effectively thins oil-based paint, stain and varnish. It can also be used to clean brushes and equipment immediately after use. ITEM NUMBER
650.42106
DESCRIPTION
LACQUER THINNER (GAL)
DESCRIPTION
COLD GALV COMPOUND PAINT-GAL COLD GALV COMPOUND PAINT-QUART
4 PC. PAINT KIT ITEM NUMBER
649.90780
DESCRIPTION
4PC KIT BANDEJA
• 1 Coat Coverage • Includes: - Deep heavy duty plastic tray - All purpose roller 9” x 3/8” - Consumer (5 wire) roller frame - Bristle & nylon 2” brush
METALLIC FISNISHES
Smooth flowing paint. Ready mixed. Will not tarnish in the container. Solvent based assures you of brilliant lustre on any work of art. Use clear exterior topcoat for exterior applications.
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
650.B30 650.B31 650.B32 650.B33
258
DESCRIPTION
ALUMINUM PAINT PLASTIKOTE GOLD LEAF PAINT PLASTIKOTE COPPER PAINT PLASTIKOTE BRASS PAINT PLASTIKOTE
PAINT BRUSHES-100% PURE BRISTLE ITEM NUMBER
8.BRUSH1 8.BRUSH2 8.BRUSH3
DESCRIPTION
PAINT BRUSH 1-1/2" PAINT BRUSH 2" PAINT BRUSH 3"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL
DIVISION
STRUCTURAL STEEL DIVISION
ANGLES-STRUCTURAL SIZES
STRUCTURAL SHAPES
L Standard Lenght 20’, 30’, 40’
B
Structural Steel Shapes conform to the ASTM (America Society for Testing and Materials) MINIMUM
MECHANICAL
PROPERTIES
TENSILE STRENGTH PSI
MINIMUM YIELD STRENGTH, PSI
CARBON CONTENT
% ELONGATION IN 2” 23
A-36
56,000 - 80,000
36,000
.26 MAX
A-572
65,000
50,000
.26 MAX
REMEMBER! We Can Repair And Fix Your Welding Machine Or Plasma Cutting Machines
• Repair • Parts • Service
© 2010 STEEL AND PIPES, INC.
C A
260
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
L
L
Standard Lenght 20’, 30’, 40’
C A
Standard Lenght 20’, 30’, 40’
C A
B
B
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
261
STRUCTURAL STEEL DIVISION
ANGLES-STRUCTURAL SIZES
© 2010 STEEL AND PIPES, INC.
ANGLES-STRUCTURAL SIZES
STRUCTURAL STEEL DIVISION
STRUCTURAL CHANNELS Standard Lenght 20’, 30’, 40’
D
STRUCTURAL CHANNELS C
Standard Lenght 20’, 30’, 40’ A
A
B
B
© 2010 STEEL AND PIPES, INC.
6
262
D
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
C
Standard Lenght 20’
D
C
STANDARD “I” BEAMS OR “S” BEAMS I
A
C
Standard Lenghts 20’, 30’, 40’
B
D
A B
STRUCTURAL STEEL DIVISION
STRUCTURAL CHANNELS
ASTM A-36
STAIR STRINGER CHANNELS
10 1.125 10 1.50 12 1.50
.150 .170 .190
x x x
6.5 8.4 10.6
130 168 212
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
263
© 2010 STEEL AND PIPES, INC.
Standard Lenght 20’
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
“WF” FLANGE BEAMS WF
Standard Lenghts 20’, 30’, 40’
“WF” FLANGE BEAMS B D
WF
Standard Lenghts 20’, 30’, 40’
A
C
ASTM A-36, A-572, A992
264
B D
C
ASTM A-36, A-572, A992
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
A
Standard Lenghts 20’, 30’, 40’
B D
WF
Standard Lenghts 20’, 30’, 40’
B
A
C
ASTM A-36, A-572, A992
D
A
C
ASTM A-36, A-572, A992
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
265
STRUCTURAL STEEL DIVISION
WF
“WF” FLANGE BEAMS
© 2010 STEEL AND PIPES, INC.
“WF” FLANGE BEAMS
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
“WF” FLANGE BEAMS WF
Standard Lenghts 20’, 30’, 40’
“WF” FLANGE BEAMS B D
WF
Standard Lenghts 20’, 30’, 40’
A
C
ASTM A-36, A-572, A992
266
B D
C
ASTM A-36, A-572, A992
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
A
Standard Lenghts 20’, 30’, 40’
B D
WF
Standard Lenghts 20’, 30’, 40’
B
A
C
ASTM A-36, A-572, A992
D
A
C
ASTM A-36, A-572, A992
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
267
STRUCTURAL STEEL DIVISION
WF
“WF” FLANGE BEAMS
© 2010 STEEL AND PIPES, INC.
“WF” FLANGE BEAMS
STRUCTURAL STEEL DIVISION
“WF” FLANGE BEAMS WF
Standard Lenghts 20’, 30’, 40’
“WF” FLANGE BEAMS B D
WF
Standard Lenghts 20’, 30’, 40’
A
C
ASTM A-36, A-572, A992
B D
A
C
ASTM A-36, A-572, A992
We have all the Safety Equipment that you need for your projects
© 2010 STEEL AND PIPES, INC.
• Gloves • Helmets • Sunglasses • and much more . . . KincoPro ™
268
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Standard Lenghts 20’, 30’, 40’
STRUCTURAL STEEL DIVISION
WF
HOT ROLLED FLAT BARS B D
Standard Lenghts 20’ A
C
ASTM A-36, A-572, A992
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
269
© 2010 STEEL AND PIPES, INC.
“WF” FLANGE BEAMS
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
HOT ROLLED FLAT BARS Standard Lenghts 20’
270
HOT ROLLED FLAT BARS Standard Lenghts 20’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Standard Lenghts 20’
STRUCTURAL STEEL DIVISION
HOT ROLLED FLAT BARS
HOT ROLLED FLAT BARS Standard Lenghts 20’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
271
© 2010 STEEL AND PIPES, INC.
REINFORCING BARS
Standard Lenghts 20’
HOT ROLLED SQUARES
© 2010 STEEL AND PIPES, INC.
Standard Lenghts 20’
272
We Fabricate anything in Steel, Stainless Steel or Aluminum d Bars / Square Bars - Varilla Redonda / Varilla Cuadrada
STRUCTURAL STEEL DIVISION
HOT ROLLED ROUNDS
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Commercial quality - low carbon
STRUCTURAL STEEL DIVISION
HOT ROLLED STEEL SHEETS
SHEET SELECTION GUIDE
ACUERDATE...
Si aún no eres miembro del CLUB DE HERREROS solicita tu aplicación HOY CHAMBERLAIN
®
_________
________________
________________
Nombre__________
___
________________
Exp.____ a __________Fecha Descuentos no aplican o grosor sea negra Socio#__________ poder aplicar el descuento. 1x1 y 1x2 de ningúnDescuentos aplican a de la compra para de construcción, tubería presentada al momento Visa, MC o ATH. previo aviso. Ciertas *La tarjeta debe ser “metal deck”, “purlins”, varilla sin tiene que ser en efectivo, sea válido la ventael derecho de cancelar estos descuentos mercancía en especial, que el descuento galvanizada. Para en la sucursal. Nos reservamos dorso de esta tarjeta. mercancía recojida ver términos y condiciones al restricciones aplican,
CHAMBERLAIN
®
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
273
© 2010 STEEL AND PIPES, INC.
AHORA EN PRODUCTOS:
HERRERO s: CLUB DEL producto en todos nuestros
5 %* de descuento
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
PLATES Commercial and specification grades
274
STEEL PLATES Universal Mill and Sheared
7.65
244.80 306.00 367.20 612.00 382.50 459.00 765.00 459.00 918.00 1,224.00 3,060.00
10.20
326.40 408.00 489.60 816.00 510.00 612.00 1,020.00 612.00 1,224.00 1,428.00 1,632.00 3,264.00 4,080.00
12.75
408.00 510.00 612.00 1,020.00 637.50 765.00 1,275.00 1,530.00 1,785.00 2,040.00 4,080.00 5,100.00
15.30
489.60 612.00 734.40 1224.00 765.00 918.00 1,836.00
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL DIVISION
STEEL PLATES
Universal Mill and Sheared
Universal Mill and Sheared
2,142.00 2,448.00 3,672.00 4,896.00 3,060.00 6,120.00 20.40
25.50
30.60
652.80 816.00 979.20 1,020.00 1,224.00 2,448.00 2,856.00 3,264.00 4,896.00 6,528.00 4,080.00 8,160.00 816.00 1,020.00 2,040.00 1,275.00 1,530.00 3,060.00 3,570.00 4,080.00 8,160.00 979.20 1,224.00 1,530.00 3,672.00 4,284.00 4,896.00 9,792.00
35.70
5,712.00
40.80
1,305.60 1,632.00 3,264.00 2,040.00 2,448.00 4,896.00 5,712.00 6,528.00 13,056.00
45.90
7,344.00 9,180.00
51.00
1,632.00 2,040.00 4,080.00 2,550.00 6,120.00 8,160.00
61.20
1,958.40 2,448.00 4,896.00 3,060.00 1,958.40 9,792.00
71.40
2,284.80 2,856.00 11,424.00
81.60
2,611.20 3,264.00 6,528.00 13,056.00
91.80
2,937.60 7,344.00 14,688.00
102.00
3,264.00 8,160.00 16,320.00
112.00
3,584.00 17,920.00
122.40
3,916.80 19,584.00
142.80
4,569.60 22,848.00
163.20
5,222.40 13,056.00
183.60
5,875.20 29,376.00
204.00
6,528.00 16,320.00 32,640.00
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
275
© 2010 STEEL AND PIPES, INC.
STEEL PLATES
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
FLOOR PLATE
Máquinas de Soldar y de Plasma para la VENTA
Floor Plate or (Checkered Plate)
6.15
196.80 246.00 295.20 492.00 307.50 615.00
8.70
278.40 348.00 696.00 435.00 870.00 1,044.00 1,392.00
RENTA de Máquinas de Soldar y Plasma
11.25
360.00 450.00 900.00 1,125.00 1,350.00 1,800.00
13.80
552.00 1,104.00 1,380.00 1,656.00 2,208.00
16.35
654.00 1,308.00 1,635.00 1,962.00 2,616.00
21.45
858.00 1,716.00 2,145.00 3,432.00
• Desempeño y confiabilidad “Extreme Duty™”
26.55
4,248.00
31.60
• Gama completa de renta de máquinas de soldar
5,056.00
41.80
6,688.00
Representates exclusivos en Puerto Rico de
• Costo efectivo • Soluciones innovadoras Somos los Representantes Exclusivos de la Mejor Soldadura a Nivel Mundial
276
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GALVANIZED AND ELECTROGALVANIZED SHEETS
STRUCTURAL STEEL DIVISION
GALVANIZED AND ELECTROGALVANIZED SHEETS
GALVANIZED SHEET & COIL Electro-galvanized conforms to ASTM A-591. Regardless of coating weight, spangle size, method of manufacture or surface preparation required SLP can supply the material needed. GALVANIZED SHEETS are continuosly hot dip coated with a durable protective coating of zinc. Can be formed without flaking or peeling. Stamping, cold drawing, double seaming and brake or roll forming will not impair their protective qualities. Can be welded and soldered. Coatings are G90 (minimum .90 oz. per foot). HOT DIPPED GALVANIZED is also available on special order in extra heavy coatings, differentially coated. GALVALUME is a corrosion resistant sheet, continuosly hot dipped coated with an aluminum zinc alloy. For certain applications it offers a substantial increase in corrosion resistance over G90 galvanized sheet. It can be readily formed, welded and soldered. End uses: appliance and automotive parts, metal buildings and agricultural parts. Conforms to ASTM A-792 AZ 50 coating.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
277
© 2010 STEEL AND PIPES, INC.
ELECTRO-GALVANIZED sheets are cold rolled steel sheets zinc coated by electrolytic deposition and conform to A-591. Should be painted if subject to outdoor exposure. The coating has a uniform dull gray matte appearance without the spangles normally present on hot dipped galvanized. The surface has been phosphate treated for immediate paintability. Can also be formed, rolled or stamped without flaking, powdering, peeling or cracking. Electrogalvanized sheets have same gauge thickness as cold rolled sheets. Particularly suited for cabinets, signs, light fixtures, etc., where an excellent finish is required.
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
SHEET TOLERANCE
278
EXPANDED METAL
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL DIVISION
GRATING & FLOORING PRODUCTS
ROUND PIPES
Steel and Pipes, Inc. Stocks two types of carbon steel pipe: Electrical Resistance Welded. (ERW) used for bending, flanging and standard welding jobs. Presure tested complies with ASTM A53 Grabe B Type E (Electrical Resistance Welded). *
Seamless Pipe. Used for high temperature service. Pipe Ordered under this specification shall be suitable for bending, flanging and similar forming operations, and for welding complies with ASTM A-106 GRADE B.
* *
* These are in Stock at any of our locations
MInimum Mechanical Properties Tensile strenght psi ...................................60,000 Yield strenght psi ......................................35,000
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
279
© 2010 STEEL AND PIPES, INC.
PIPE SIZE ERW. A structural purpose pipe sized tube ordered to ASTM A500. Compared to pipe, this product offers higher strenght, better straightness as well as a superior finish and usually cost less than pipe.
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
ROUND PIPES ASTM A-53 and A-106
280
ROUND PIPES ASTM A-53 and A-106
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ASTM A-53 and A-106
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
281
STRUCTURAL STEEL DIVISION
INDUSTRIAL QUALITY FITTINGS
© 2010 STEEL AND PIPES, INC.
ROUND PIPES
STRUCTURAL STEEL DIVISION
PICTORAL INDEX TUBE TURN® WELDING FITTINGS AND FLANGES
SQUARE TUBING Standard Lenghts 20’, 24’, 40’and 48’
Structural ASTM A500 GR.B. This is an ERW Tubing (Electric Resistance Welded) easily welded, rolled or punched. Steel and Pipes Stocks ASTM A500 GR.B.
Minimun Mechanical Properties ASTM A500-GR.B ASTM A500-GR.C
OXY-FUEL GAS PRODUCTS WELDING & CUTTING OUTFITS
Tensile Strength PSI 58,000 62,000
Yield Strength PSI 46,000 50,000
% Elongation in 2” 23 21
Outside Corner Radius The radius of any outside corner of the section shall not exceed 3 times the nominal wall thickness.
VISIT OUR SPACIOUS SHOWROOMS! STRATEGICALLY PLACE LOCATIONS ALL OVER PUERTO RICO AND WITH THE BEST CUSTOMER SERVICE AROUND
© 2010 STEEL AND PIPES, INC.
OF PICTURERSANCH B S A U CAG
282
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL DIVISION
Standard Lenghts 20’, 24’, 40’and 48’
SQUARE TUBING Standard Lenghts 20’, 24’, 40’and 48’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
283
© 2010 STEEL AND PIPES, INC.
SQUARE TUBING
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
SQUARE TUBING
RECTANGULAR TUBING
Standard Lenghts 20’, 24’, 40’and 48’
284
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL DIVISION
RECTANGULAR TUBING
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
285
© 2010 STEEL AND PIPES, INC.
RECTANGULAR TUBING
STRUCTURAL STEEL DIVISION © 2010 STEEL AND PIPES, INC.
RECTANGULAR TUBING
286
RECTANGULAR TUBING
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
STRUCTURAL STEEL DIVISION
RECTANGULAR TUBING
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
287
© 2010 STEEL AND PIPES, INC.
RECTANGULAR TUBING
DIVISIÓN DE ACERO ESTRUCTURAL
DIVISIÓN DE FABRICACIONES MISCELÁNEAS EN ACERO
Cuentan con el inventario más grande y amplio de materiales industriales y de construcción
DIVISIÓN DE PRODUCTOS MECÁNICOS De TODO para el Contratista Mecánico y la Industria Farmacéutica
DIVISIÓN DE VERJAS PVC, INDUSTRIALES os 34 essctoilger e a
• Escaleras • Parrillas Pluviales • Viguetas • Plataformas para Camiones • “Railings”Pasamanos • Platos cortados y perforados • “Lally columns” • Pernos de anclaje • Roleo y doblez de planchas • Moldes en Acero para cualquier trabajo
Barandas y Pasamanos en “Stainless Steel”
Facil Método de Instalación: Residencial • Comercial • Escuelas • Parques • Áreas Recreativas
DIVISIÓN DE DISEÑOS ORNAMENTALES EN ACERO PARA: • Verjas • Barandas • Rejas • Pasamanos
DIVISIÓN DE GASES INDUSTRIALES Venta y Alquiler
• Oxygen (O2) • Acetylene • Argon • Nitrogen • Industrial gases • Carbon dioxide • Argon mixture 75% and CO2 25% ¡Helio para • Helio Globos!
“PRE-ENGINEERED” EDIFICIOS EN METAL
No solo fabricamos misceláneos si no que también vendemos e instalamos Edificios Pre-Fabricados... Distribuidores Exclusivos en Puerto Rico y el Caribe.
DIVISIÓN DE PRODUCTOS DE SOLDADURAS Todas nuestras tiendas con amplio Showroom donde puede adquirir sus equipos de soldadura
¡Tenemos todo el equipo para la seguridad del Herrero! Variedad en Discos para corte
DIVISIÓN DE REPARACIÓN MÁQUINAS DE SOLDAR Y PLASMAS
¡Reparamos su máquina en el menor tiempo posible!
STAINLESS STEEL RAILING
DIVISION
SYSTEMA INOX
速
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
HANDRAIL SUPPORTS WITH ADJUSTABLE HEIGHTS Joint is pivoted and adjustable in height with a satin finish
STAINLESS STEEL TUBES AISI 304 ART. NO. E001 E001/6000
AISI 316 ART. NO. E4801/6000
DIMENSIONS
adjustable in height
Stainless steel, satin finish, with grain size 240, individually packed
WEIGHT
1 2/3” dia. x 5/64” x 9’- 10” 1 2/3” dia. x 5/64” x 19’- 8”
DIMENSIONS
6,07 kg 12,14 kg
1 2/3” dia. x 5/64” x 19’- 8”
Joint is rigid, adjustable in height with a satin finish
© 2010 STEEL AND PIPES, INC.
E005 E005/6000
290
DIMENSIONS
WEIGHT
1/2” dia. x 9’- 10” 1/2” dia. x 19’- 8”
2,66 kg 5,32 kg
DIMENSIONS
WEIGHT
1/2” dia. x 9’- 10” 1/2” dia. x 19’- 8”
2,66 kg 5,32 kg
AISI 316 ART. NO. adjustable in height
AISI 316 ART. NO.
FOR TUBE 1 2/3”dia. x 5/64”
6,07 kg
Stainless steel, ground
E005 E005/6000
E500/424
WEIGHT
ROUND BARS
AISI 304 ART. NO.
AISI 316 ART. NO.
E510/424
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FOR TUBE 1 2/3”dia. x 5/64”
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
HANDRAIL SUPPORTS 2 pieces complete with end cap for tube
3 pieces complete with screw and end cap for tube
4 pieces complete with screws and end cap for tube
H
AISI 303
ART. NO HEIGHT H FOR TUBE E0102
3/4” dia. 1 2/3”dia. x 5/64”
AISI 303 ART. NO E031/S1
HEIGHT FOR TUBE 2 61/64” 1 2/3”dia. x 5/64”
AISI 303 ART. NO HEIGHT FOR TUBE E030/S
2 61/64” 1 2/3”dia. x 5/64”
3 pieces complete with screw and end cap for tube
H
AISI 303
ART. NO
HEIGHT H FOR TUBE
E0104
3/4” dia. 1 2/3”dia. x 5/64”
AISI 316 ART. NO FOR TUBE HEIGHT E454
2/3” dia. x 3/32” 1/4”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
291
© 2010 STEEL AND PIPES, INC.
Tube adapter with a satin finish
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
LATERAL ANCHORS
HANDRAIL SUPPORTS
H
AISI 304
ART. NO. FOR TUBE E11320
3 pieces complete with screws and end cap for tube
4 pieces complete with screws and end cap for tube
AISI 303 ART. NO. HEIGHT FOR TUBE E040100
3 5/8”
AISI 303 ART. NO. HEIGHT FOR TUBE
1 2/3”dia. x 5/64”
E039900
3 5/8”
1 2/3”dia. x 5/64”
AISI 304
AISI 304
ART. NO.
FOR TUBE
E116
1 2/3” dia. x 5/64”
ART. NO. E114
3 pieces complete with screw and end cap for tube
2 pieces complete with end cap for tube
AISI 303 ART. NO. HEIGHT FOR TUBE
AISI 303 ART. NO. HEIGHT FOR TUBE
E040700
2 15/16”1 2/3”dia. x 5/64”
E040900
ANCHORS FOR HANDRAILS Anchore for tube, satin finish
AISI 316 ART. NO. FOR TUBE 1 2/3” dia. x 5/64”
FOR TUBE 1 2/3” dia x 5/64”
2 15/16” 1 2/3”dia. x 5/64”
AISI 304
E4561
1 2/3” dia. x 5/64”
ANCHORS FOR HANDRAILS
ART. NO. E111
FOR TUBE DISC
1 2/3” dia. x 5/64” 4 515/16” dia x 5/16”
Anchore for tube, satin finish
AISI 316
ART. NO. FOR TUBE E4565 E4566
1 1/3”dia. x 5/64” 1 2/3”dia. x 5/64”
© 2010 STEEL AND PIPES, INC.
Lateral tube holder for newel posts, thk . 3/8” inches
AISI 304
292
ART. NO.
FOR TUBE
E406
2/3” dia. x 5/64”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SYSTEMA INOX
X
AISI 304 ART. NO.
X
H
STAINLESS STEEL NEWEL POSTS
1 2/3” dia. x 5/64” 47 1/4”
E00450
Satinato grana 240 completo di piastra di ancoraggio a parete Satin finish, with grain size 240, complete with lateral flange
ART. E113
2 3/4”
H
STAINLESS STEEL DIVISION
®
X
Satin finish, with grain size 240, complete with welded flange H
AISI 316 AISI 304 ART. NO. ART. NO. E0042316 E0042 E0040316 E0040
AISI 304 ART. NO.
4 4 4
H
1 2/3” dia. x 5/64” 39 3/8” 1 2/3” dia. x 5/64” 47 1/4”
FOR BAR N° ROUND BAR SUPPORTS DIAMETER
E00460 E00462 E00464 H
X
X
5/16” dia. 9 7/16” 3/8” dia. 9 7/16” 1/2” dia. 9 7/16”
Y
H
7 7/8” 7 7/8” 7 7/8”
43 1/4” 43 1/4” 43 1/4”
Satin finish, grain size 240 complete with pivotable handrail support, pivotable anchor base
X
ART. E021330
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
293
© 2010 STEEL AND PIPES, INC.
Y
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
WALL HANDRAIL SUPPORTS 3 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
AISI 304
ART. NO DESCRIPTION E0223
Complete with rigid mounting plate
3 pieces, complete with flange 2 3/4” dia. x 15/64” elbow 2 61/64”x 2 61/64”, 1/2” dia.
4 pieces complete with aluminium flange, flange canopy and mounting plate
AISI 304
AISI 304
ART. NO DESCRIPTION E02231
Pivoted joint
ART. NO FOR TUBE E022/S
1 2/3” dia.
PIVOTABLE ROUND BAR CONNECTOR Pivotable round bar connector
AISI 303
ART. NO
ROUND BAR
E0070
1/2” dia.
Pivotable, complete with set screws
AISI 303
ART. NO FOR TUBE ROUND BAR E0074
1 2/3” dia. 1/2” dia.
© 2010 STEEL AND PIPES, INC.
Adjustable
294
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SYSTEMA INOX
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
295
© 2010 STEEL AND PIPES, INC.
STAINLESS STEEL DIVISION
®
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
ROUND BAR HOLDERS Two components, complete with screws set
Complete with 2 pieces and threaded lock for rod
AISI 303
AISI 303 ART. NO FOR TUBE
ART. NO. HOLE
HOLE
E006965 1/2” dia. 13/32” dia. E006966 1/2” dia. 1/2” dia.
E006910 E0069 E00691 E006917 E00692 E006921
1 2/3” dia. 1 2/3” dia. 1 2/3” dia. Flat face Flat face Flat face
Complete with 2 pieces and threaded lock for rod
AISI 303 ART. NO.
HOLE
E006
3/8” dia. through 1/2” dia. through 9/16” dia. through 3/8” dia. through 1/2” dia. through 9/16” dia. through
FOR TUBE
HOLE DESCRIPTION
1 1/3” dia. - 1 2/3” dia. 1/2” dia. Through
Complete with 2 pieces and threaded lock for rod
AISI 316 ART. NO
FOR TUBE
HOLE
E40493 E40492
1 2/3” dia. 1 2/3” dia.
1/2” dia. blind right 1/2” dia. blind left
AISI 303 ART. NO.
Satin finish with grain size 240, thk. 1/16” inches
AISI 304 ART. NO. DIMENSIONS HOLE 2 63/64” dia.
HEIGHT
E019 3 15/64” dia. 1 11/16” dia. 19/32” E020 4 9/64” dia. 1 11/16” dia. 19/32”
© 2010 STEEL AND PIPES, INC.
E00697210 1 2/3” dia.
1/2” dia.
1/2” dia.
AISI 316 ART. NO. FOR TUBE E450
AISI 316
1 2/3” dia. x 5/64”
ART. NO.
FOR TUBE
E451
1 2/3” dia. x 5/64”
1/2” dia. 1/2”
AISI 304 ART. NO. DIMENSIONS HOLE HEIGHT
296
1 2/3” dia.
AISI 303 ART. NO. FOR TUBE HOLE
TUBE FITTINGS
FLANGE CANOPIES
E0182
E00699400
FOR TUBE HOLE
ANCHORAGE ELEMENTS
ANCHORS FOR HANDRAILS
AISI 316 ART. NO.
AISI 316
E4483
FOR TUBE 1 2/3” dia. x 5/64”
ART. NO. E456 E2066
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FOR TUBE
1 2/3” dia. 1 1/3” dia.
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
TUBE FITTINGS 3-way corner, satin finish E203
FOR TUBE
AISI 316 ART. NO.
AISI 316 ART. NO.
1 2/3” dia. x 5/64”
END CAPS
E453
FOR TUBE
E4471
1 2/3” dia. x 5/64”
FOR TUBE
AISI 303
E0119120 1 2/3” dia. x 5/64”
ART. NO. FOR TUBE E01112
1 2/3” dia. x 5/64”
Bent 90°, rounded, satin finish
Pivotable connector, satin finish
AISI 316 ART. NO. FOR TUBE
AISI 316 ART. NO
E481
Overlapping end cap
AISI 303
ART. NO. FOR TUBE
AISI 316
E0119420 1 2/3” dia. x 5/64”
Satin finish, without knurling
AISI 303
1 2/3” dia. x 5/64”
FOR TUBE
AISI 303
E461 Ø 42,4 mm - 1 2/3” dia.
AISI 303
ART. NO. FOR TUBE
1 2/3” dia. x 5/64”
ART. NO. E0119
E446
FOR TUBE
1 2/3” dia. x 5/64”
Satin finish with knurling
ART. NO.
Satin finish, with knurling E01151
FOR TUBE 1 2/3” dia. x 5/64”
SEMISPHERICAL END CAPS
Satin finish with knurling
AISI 303 ART. NO.
Articulated elbow, satin finish
FOR TUBE
1/2” dia. x 5/256”
ART. NO. FOR TUBE E0119220 1 2/3” dia. x 5/64”
Satin finish, without knurling
AISI 303
ART. NO. FOR TUBE E0118 1/2” dia. x 5/256”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
297
© 2010 STEEL AND PIPES, INC.
AISI 316 ART. NO.
3-Way flush “T”, satin finish
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
END CAPS WITH VARIOUS SHAPES
SOLID SPHERES WITH HOLES
Knob, satin finish
AISI 316
ART. NO. E457
FOR TUBE
H
1 1/3” dia. x 5/64”
4-1/6”
AISI 303
ART. NO. DIMENSIONS HOLE E01261 E0127
25/32” dia. blind hole1/2” dia. 1” dia. blind hole 1/2” dia.
END CAPS FOR ROUND BARS AISI 303 ART. NO. FOR ROUND BAR E910510
1/2” dia.
AISI 303 ART. NO. FOR ROUND BAR E912010
1/2” dia.
END CAPS FOR ROUND BARS AISI 303 ART. NO. FOR ROUND BAR
AISI 303
ART. NO. FOR ROUND BAR
© 2010 STEEL AND PIPES, INC.
E911510 1/2” dia.
298
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
E913010 1/2” dia.
SYSTEMA INOX
STAINLESS STEEL GLASS CLAMPS SATIN FINISH With locking pin and protective plastic washers
E009 E00960 E0091
1 11/16” x 2 33/64” 1 11/16” x 2 33/64” 1 11/16” x 2 3/8”
FOR TUBE 1 2/3” dia. 1 2/3” dia. FLAT FACE
GLASS THK. 5/16” and 3/8” 3/8” and 1/2” 5/16” and 3/8”
E00921 E00931
1 11/16” x 1 7/8” 1 11/16” x 1 11/16”
E00912
1 1/2” x 2 3/64”
FOR TUBE 1 2/3” dia.
GLASS THK. 5/16” and 3/8”
With locking pin and protective plastic washers
With locking pin and protective plastic washers
AISI 316 ART. NO. DIMENSIONS
AISI 316 ART. NO. DIMENSIONS
FOR TUBE
GLASS THK.
1 2/3” dia. FLAT FACE
5/16” and 3/8” 5/16” and 3/8”
AISI 316 ART. NO. DIMENSIONS E0092
2 3/64” x 2 9/32”
FOR TUBE
GLASS THK.
1 2/3” dia.
5/16” and 3/8”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
299
© 2010 STEEL AND PIPES, INC.
AISI 316 ART. NO. DIMENSIONS
With locking pin and protective plastic washers
STAINLESS STEEL DIVISION
®
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
With locking pin and protective plastic washers
AISI 316 ART. NO. DIMENSIONS E00971 E00931
2 5/64” x 2 5/8” 2 5/64” x 2 3/8”
With locking pin and protective plastic washers
FOR TUBE 1 2/3” dia. FLAT FACE
GLASS THK. 1/2” 1/2”
AISI 316 ART. NO. DIMENSIONS E00981
2 3/64” x 2 3/8”
FOR TUBE 1 2/3” dia.
AISI 316
E00820 E00821
2 3/8” dia. 2 3/8” dia.
FOR TUBE
GLASS THK.
1 2/3” dia. FLAT BAR
5/16” 5/16”
FOR TUBE
E40581 E00931
1 2/3”dia. FLAT FACE
Complete with plastic washers in PVC
AISI 304
ART. NO.
HOLE
E4032/304
1 /2” dia.
ROUND CLAMPS FOR 1 PIECE OF GLASS AISI 304 ART. NO. DIMENSIONS
© 2010 STEEL AND PIPES, INC.
E00830 E00831
300
2 3/8” dia. 2 3/8” dia.
FOR TUBE
GLASS THK.
1 2/3” dia. FLAT BAR
5/16” 5/16”
2 pieces with screw and plastic washers
AISI 316
ART. NO.
FOR TUBE
E40560
1 2/3” dia.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
1/2”
ART. NO.
ROUND CLAMPS FOR 2 PIECES OF GLASS AISI 304 ART. NO. DIMENSIONS
GLASS THK.
SYSTEMA INOX
SPIDERS AISI 304
3 pieces: one arm with hole and two round clamps for glass
2 pieces: one arm with hole and one round clamp for glass
SPIDER ADAPTERS ART. NO.
FOR TUBE
E00882 E00883
1 2/3” dia. FLAT FACE
AISI 304
ART. NO.
FOR GLASS
E00881
from 11/32” to 1/2”
TO ANCHOR THESE PRODUCTS USE THESE ARTICLE NUMBERS: E00882, E00883 AISI 304 E00882316, E00883316 AISI 316
AISI 304
ART. NO.
FOR GLASS
E00880
from 11/32” to 1/2”
STAINLESS STEEL DIVISION
®
TO ANCHOR THESE PRODUCTS USE THESE ARTICLE NUMBERS: E00882, E00883 AISI 304 E00882316, E00883316 AISI 316
GLASS HANDRAIL SUPPORTS
AISI 303
ART. NO.
DESCRIPTION
E022/S1
FOR GLASS THICKNESS 5/16” - 1” Glass to be drilled at 55/64” dia.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
301
© 2010 STEEL AND PIPES, INC.
4 pieces complete with glass clip and mounting plate, for glass
SYSTEMA INOX
© 2010 STEEL AND PIPES, INC.
STAINLESS STEEL DIVISION
®
302
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SYSTEMA INOX
Threaded inserts for riveting tool
Drilling template, patented for tubes dia. 1 1/3”- 1 2/3” - 1 7/8” Such equipment allows to make radial holes dia. 9/32” - 11/32” 7/16” for threaded inserts and holes for M5 - M6 - M8 threadings
Plastic box containing tool, with M5, M6, M8 mandrels and heads. Riveting tool for threaded inserts M5, M6, M8.
AISI 304 COD.ART. THREAD E40591 E40592 E40593
M5 M6 M8
STAINLESS STEEL DIVISION
®
COD.ART.
COD.ART.
E40590
E40580
Hexagon socket countersunk flat head screw UNI 5933 / DIN 7991
SUPPORT FOR ANCHOR TUBES E014 to be combined with anchorage flange E016 ÷ 017
AISI 304
THREAD
E0385 E032
M5 x 1” M10 x 1”
E001 E014
Art. E016 Art. E017
Hexagon socket head cap screw UNI 5931 / DIN 912 /ISO 4762
Cemento Concrete
AISI 304
THREAD
E0323
M8 x 25/32”
ALUMINIUM
ART. NO. E014
DIMENSIONS
FOR TUBE
1 1/2” dia. blind hole M8
1 2/3” dia. x 5/64”
ANCHORAGE FLANGE (ALUMINIUM)
AISI 304
THREAD
E0382 E0381
13/64” x 25/32” 15/64” x 25/32”
ALUMINIUM
ART. NO.
DIMENSIONS
INTERNAL HOLE
EXTERNAL HOLES
E016 E017
2 61/64” dia. 3 47/64” dia.
5/16” dia. 5/16” dia.
4 x 15/64” dia. 4 x 15/64” dia.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
303
© 2010 STEEL AND PIPES, INC.
Cross recessed countersunk flat head screw (for wood) DIN 7505A
In aluminium, thk. 5/16” and central hole 7/16” dia.
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
Degreaser spray Spray for cleaning all metal surfaces to be glued.
Cod.art.
Leaves a thin antistatic and water-repellent coat on the treated metallic surfaces. It is recommended on finished products.
Cod.art.
E4051
E4052
WIRE ROPES 7 X 7
7
Stainless steel ropes
7 AISI 316
ART. NO.
ROPE
EF7X704 EF7X705 EF7X706
5/32” dia. 13/64” dia. 15/64” dia.
MIN. BRAKE LOAD 9,00 kN 20,00 kN 20,00 kN
Threaded terminal
y
AISI 316
x Adjustable connector
AISI 304
Finial with hexagonal head
Fastening screw
AISI 316
AISI 316
© 2010 STEEL AND PIPES, INC.
AISI 303
ART. NO. LEFT
ART. NO. RIGHT
ROPE
ETM04SX ETM05SX ETM05SX
ETM04DX ETM05DX ETM06DX
5/32” dia. M6 13/64” dia. M6 15/64” dia. M6
Y 2 23/64” 2 23/64” 2 3/4”
ART. NO.
DESCRIPTION
ED05
Adjustable ropes with 2 M6 thread
ART. NO.
DESCRIPTION
ED06 ED06SX
Domed head nut right hand thread M6 Domed head nut left hand thread M6
ART. NO.
DESCRIPTION
ED07 ED07SX
Rounded head screw M6 thread right Rounded head screw M6 thread left
ART. NO.
ROPE
EA05
304
X
13/64” - 15/64” dia.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ROPE 13/64” dia.
X
Y
M6 25/32” dia.
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
Threaded inside terminal
AISI 316
ART. NO. LEFT
ART. NO. RIGHT
ETF04SX ETF05SX ETF06SX
ETF04DX ETF05DX ETF06DX
ROPE
X
5/32” dia. 13/64” dia. 15/64” dia.
M6 M6 M6
y
Y 2 23/64” 2 23/64” 2 3/4”
x
Coupling nut
AISI 316
ART. NO.
DESCRIPTION
ET06
Domed head nut right thread M6
Dome head terminal for wire rope, to crimp
AISI 316
AISI 303
ART. NO.
ROPE
ETTB04 ETTB05 ETTB06
5/32” dia. 13/64” dia. 15/64” dia.
Wire rope support external, passage
ART. NO.
FOR TUBE
HOLE
ROPE
ESF051
1 2/3” dia.
7/32” dia.
13/64” dia.
Terminal supports for external wire rope
ART. NO. EST041DX EST041SX
FOR TUBE 1 2/3” dia. 1 2/3” dia.
ROPE 5/32”-13/64”-15/64” dia. 5/32”-13/64”-15/64” dia.
Manual crimping tool, Hydraulic crimping tool for pressing the terminal support for wire ropes
Cod.art. Generated power 50 kN E40685
Shearing tool for wire ropes till 5/16” dia.
Cod.art. E40690
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
305
© 2010 STEEL AND PIPES, INC.
AISI 303
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
EXAMPLES OF APPLICATIONS ED06
ETM05DX
ETM05DX
ETF05DX
ETM05DX ETM05SX
ET06
ETM05DX
ED07
ED05
EA05
EA05
EB071 ETM05DX
ED06
ED06
ETFM06DX
ED06
ETMT06DX
ETFT05
ETFF04
ETTB05 ETFF05
EST04SX
© 2010 STEEL AND PIPES, INC.
ED06SX
306
ETFT05
ESF04 ETM04SX
EST04DX ETM04DX
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
E0124
SYSTEMA INOX
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
307
© 2010 STEEL AND PIPES, INC.
STAINLESS STEEL DIVISION
®
SYSTEMA INOX
STAINLESS STEEL DIVISION
®
AISI 304
ART. NO.
DESCRIPTION
E4265
Flat end terminal
AISI 304
AISI 304
ART. NO.
DESCRIPTION
E4260
Rounded end terminal
ART. NO.
DESCRIPTION
E4260
Rounded end terminal
SATIN FINISH WITH GRAIN SIZE 240, THK. 1/16” INCHES
WOOD AISI 304
ART. NO.
DESCRIPTION
E4586
Handrail support
ART. NO.
DESCRIPTION
E692/3000
Wooden handrail 10 ft long
1 3/4”
EINSM6X12
Screw in nut + set screw M6 included with handrail support E4586
ESM614
Colour: Wengè
WOODEN HANDRAILS 1 3/4” DIA. WOOD
ART. NO.
DESCRIPTION
E690/3000
Wooden handrail 10 ft long
1 3/4”
Colour: Beech
WOOD
ART. NO.
DESCRIPTION
E690/3000/G
Wooden handrail 10 ft long
1 3/4”
© 2010 STEEL AND PIPES, INC.
Raw finish, unpainted
308
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
SYSTEMA INOX
AISI 304
ART. NO.
DESCRIPTION
E600
90° curved
ART. NO.
DESCRIPTION
E603
AISI 304
ART. NO. E605
Wooden handrail connector 1 3/4” dia.
AISI 304
PLASTIC
ART. NO.
DESCRIPTION
E601
90° angle
ART. NO.
DESCRIPTION
E600/T
Plastic supports for end caps and fittings (screw included)
AISI 304
ART. NO.
DESCRIPTION
E604
Articulated angle
ALUMINIUM
ART. NO.
DESCRIPTION
E600/D
Drill-gauge for wooden handrails
DESCRIPTION Pivotable connector
WALL ANCHOR FOR HANDRAIL AISI 304
ART. NO. E6080
HOLE DIAMETER 1 3/4” dia.
EASY TO INSTALL E600/D
E600/T
E4265
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
309
© 2010 STEEL AND PIPES, INC.
AISI 304
STAINLESS STEEL DIVISION
®
Do you need :
STEEL... we have it 1979-2009 GASES... we have it WELDING PRODUCTS... we have it STAINLESS STEEL... we have it Or maybe... ALUMINUM ?
WE ALSO HAVE IT
We are your Industrial Supermarket www.steelandpipes.com
With a branch near you : Caguas (Main Office) T. (787) 747-9415 F. (787) 747-8986 Hato Rey T. (787) 250-8872 F. (787) 250-8871
Manatí T. (787) 854-6626 / 6771 F. (787) 793-4370 Las Piedras T. (787) 912-3000 F. (787) 912-3002
Ponce T. (787) 651-0100 F. (787) 651-0101
Quebradillas T. (787) 291-5000 F. (787) 291-5002
Guayama T. (787) 864-0240 F. (787) 864-2917
Mayagüez T. (787) 834-0560 / 0565 F. (787) 834-0590
Bayamón T. (787) 778-5990 / 8364 F. (787) 780-7165 Río Grande T. (787) 657-1188 F. (787) 657-1189 DUROFENCE by
II
Fence Ever
GATE OPERATORS & TELE-ENTRY SYSTEM DIVISION
GATE OPERATORS & TELE-ENTRY DIVISION
DEIMOS SERIES
18
ELECTRO MECHANICAL AUTOMATION FOR RACK SLIDING GATES • SMART TECHNOLOGY.
> Electromechanical microswitches that control the end of stroke. > Incorporated two-channel rolling code radio receiver. > Control unit with self-learning and self-diagnostic functions. > Control unit compatible with the EElink protocol.
ITEM NUMBER
DESCRIPTION
225.R92522800003
DEIMOS BT KIT UL/CSA
VOLTAGE
24 V
LEAF WEIGHT
UP TO 1100 LBS (~500 KG)
ACCESSORIES 225.P125002 - SB BAT 24 Vdc battery backup system for DEIMOS BT, it includes a charger board that activates the batteries when power is off and charges the batteries when power is on.
225.D221073- CP
22x22 4mm-pitch plastic rack with adjustment slots. 3’ 3’’ length.
DIMENSIONS
225.D11175400001-CONTROL BOARD
© 2010 STEEL AND PIPES, INC.
Replacement for DEIMOS BT Kit
265 10.43”
50 1.97”
1.69” 43
312
160 6.30”
249 9.80”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GATE OPERATORS & TELE-ENTRY DIVISION
ICARO FAST
ELECTRO MECHANICAL AUTOMATION FOR RACK SLIDING GATES
20
• SMART TECHNOLOGY.
> Incorporated two-channel rolling code radio receiver, plug-in connector for connection of a second receiver. > Control unit with self-learning and self-diagnostic functions of the parameters: brake, torque, obstruction detection. > Control unit compatible with the EElink protocol.
ITEM NUMBER
DESCRIPTION
VOLTAGE
LEAF WEIGHT
225.P925185 00002
ICARO FAST
120 V
UP TO 2200 LB (~1000 KG)
ACCESSORIES 225.D571053 - CVZ
225.P121019 - T-BOX Remote control digital pushbutton panel for exterior use, with backlit light-touch keypad.
30x12 4mm pitch galvanised adjustable steel rack 3’ 3” length.
DIMENSIONS
Z18Z25 Øp72 Ø3.9”
65 1.57”
40
10.23”
260
2.56”
10.23”
260
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
313
© 2010 STEEL AND PIPES, INC.
14.80” 376
GATE OPERATORS & TELE-ENTRY DIVISION
PHOBOS SERIES
• SAFE USE.
> This version powered at 24V has been specially designed for simpler and faster installation in compliance with latest safety standards. > Thanks to the obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of contact.
ELECTRO MECHANICAL OPERATOR FOR SWING GATES
• SIMPLER INSTALLATION.
• SMART TECHNOLOGY.
> Control unit compatible with the EElink protocol.
REFERENCE
DESCRIPTION
VOLTAGE
225.R935246 00002 225.R935246 00003 225.R935245 00001
PHOBOS BT KIT 1 OPERATOR UL/CSA PHOBOS BT KIT 2 OPERATOR UL/CSA PHOBOS BT L KIT 1 OPERATOR
24 V 24 V 24 V
> BFT’s system of coded limit switches makes it possible to reduce the complexity of wiring the low-voltage motors: a single wire is carried to the control panel instead of the three or five normally required, thereby increasing the simplicity and speed of installation. Furthermore, the system is able to automatically distinguish between the open limit switch and the closed one and hence prevent wasted time and wiring errors.
LEAF WEIGHT
LEAF LENGTH
UP TO 550 LB (~250 KG) UP TO 550 LB (~250 KG) UP TO 550 LB (~250 KG)
UP TO 10’ (3 M) UP TO 10’ (3 M) UP TO 16’5”(5 M) WITH ELECTRIC LOCK 10’ (3 M) WITHOUT ELECTRIC LOCK
ACCESSORIES 225.D113701 00001 LIBRA UL R
225.P125005 - BT BAT
24 Vdc battery backup system for PHOBOS BT, PHOBOS BT L, IGEA BT it includes a charger board that activates the batteries when power is off and charges the batteries when power is on.
mm
BT
BT L
a
32.48”
37.13”
max b
11.61”
16.14”
c
2.67”
4.25”
DIMENSIONS PHOBOS BTL/ PHOBOS BT
102 4.02”
© 2010 STEEL AND PIPES, INC.
a MAX b 80 3.15”
314
c 55 2.17”
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
225.N733286 - SFR Adjustable post bracket for PHOBOS BT.
GATE OPERATORS & TELE-ENTRY DIVISION
IGEA SERIES
ELECTRO MECHANICAL OPERATOR FOR SWING GATES
• A MODEL FOR EVERY NEED.
> Great versatility thanks to the levers that permit installation on large sized pillars, opening up to 125°.
• SMART TECHNOLOGY.
> Control unit compatible with the EElink protocol.
REFERENCE
DESCRIPTION
225.R935229 00003 225.R935229 00004
IGEA BT KIT 1 OPERATOR IGEA BT KIT 2 OPERATORS
VOLTAGE
24 V 24 V
LEAF WEIGHT
LEAF LENGTH
UP TO 550 LB (~250 KG) UP TO 550 LB (~250 KG)
UP TO 10’ (3 M) UP TO 10’ (3 M)
DIMENSIONS
6.06” 154
7.20” 183
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
315
© 2010 STEEL AND PIPES, INC.
13.86” 352
GATE OPERATORS & TELE-ENTRY DIVISION
SERIE MOOVI
ELECTRO MECHANICAL OPERATOR FOR ROAD BARRIERS • A MODEL FOR EVERY NEED.
> Available in two versions, for openings from 10’ (3 m) to 16’6’’ (5 m) and speeds from 4 to 8 s. > Can be equipped with a wide range of accessories.
• SMART TECHNOLOGY.
> Internal cool-down system. > Fast release with personalised key. > Pre-drilled frame to allow simpler installation of the accessories.
ITEM NUMBER
DESCRIPTION
VOLTAGE
225.P940026 00004 225.P940028 00004
MOOVI 30 UL/CSA 120 V MOOVI 50 UL/CSA 120 V
BOOM LENGTH
up to 10 ‘ (3 m) up to 16’6’’ (5 m)
DIMENSIONS 8.66”
3.54”
2.76”
43.31”
43.31”
8.66”
2.76
31.50” 31.50”
12.60” 12.60”
10’ MOOVI 30
WHEN ORDERING INDICATE THE WORkING PASSAGEWAY
DRIVEWAY
-7.78
DRIVEWAY
-7.78
CEILING CLEARANCE
ARTICULATED BOOM
ACCESSORIES 225.N728020
ELL 3 10 FEET (3m)
© 2010 STEEL AND PIPES, INC.
10’ (3 m) boom.
225.N728021 ELL 5 16,5 FEET (5m) 16’6’’ (5m) boom.
316
225.D111662
225.D730251 - CBO
225.P12000300002 - PCA 6
225.P12000100001 KIT MOOVI LIGHT
BFT CLONIX 2/128 PLU IN RECEIVER
Boom upper and lower rubber profile for ELL6.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
MOOVI anchor base.
Lighting kit for 10’ (3m) booms. To be used in combination with the MOOVI PCA kit
GATE OPERATORS & TELE-ENTRY DIVISION
• COMPATIBILITY
18
ECOSOL can be used with all BFT low voltage operators
SOLAR-POWERED SYSTEM
• INDEPENDENT OPERATION
Up to two weeks (domestic use) with absolutely no sunshine.
Charge can be doubled by adding the ECOSOL DOUBLE • VERSATILITY
Photovoltaic cell panel with brackets to fix to the wall or post (optional)
• WARRANTY 24 months.
10W, 24V solar panel for connection to ECOSOL BOX.
ECOSOL PANEL
ITEM NUMBER
DESCRIPTION
225.N999471 225.D113731
ECOSOL PANEL ECOSOL BOX WITH TWO BATTERIES
ACCESSORIES 225.N999471 - ECOSOL PANEL
10W, 24V solar panel for connection to ECOSOL BOX. Can be installed in parallel for improved recharge capacity. Complete with stainless steel screws and brackets for mounting on wall or horizontal surface. Features carry handle for possible quick-charging of batteries from mains through ECOSOL CHARGER accessory
225.D113731 - ECOSOL BOX WITH TWO BATTERIES
Interface for running BFT control panels off 24V solar power. Includes two 12V 7.2Ah batteries and circuit board for management of commands to control panel and battery charge management, with built-in Rolling Code 433.92 MHz receiver with 63 stored positions. Features carry handle for possible quick-charging of batteries from mains through ECOSOL CHARGER accessory.
225.N999473 - ECOSOL ROUND POST MOUNTING BRACKET Bracket and stainless steel screws kit for mounting ECOSOL PANEL on post measuring 48 to 100 mm in diameter.
225.N999475 - ECOSOL SECURITY
ECOSOL SECURITY BOLTS TO AVOID THEFT OF SOLAR PANEL Anti-tamper stainless steel screws kit for ECOSOL PANEL and ECOSOL POST BR.
225.N999477 - ECOSOL CHARGER
100-230V - 24V battery charger for quick-charging from mains for ECOSOL BOX and ECOSOL DOUBLE.
225.D113732 - ECOSOL DOUBLE
Battery capacity expansion for ECOSOL BOX. Includes two 12V 7.2Ah batteries.
α
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
317
© 2010 STEEL AND PIPES, INC.
90°
225.KSPC001 - 15’ SOLAR PANEL CABLE
GATE OPERATORS & TELE-ENTRY DIVISION
ECOSOL PHOBOS BT SINGLE & DOUBLE KITS
18
LINEAR ELECTROMECHANICAL OPERATORS FOR SWING GATES
Phobos BT: Up to 550 Lbs & 10 Feet Phobos BT L: Up to 550 Lbs & 16.5 Feet (Available by order only) The Kit Contains:
• 1 or 2 Phobos BT or Phobos BT L operators • 1 or 2 mounting bracket sets with ARB adjustable post brackets • 1 large enclosure pre-wired box with Libra UL/CSA and incorporated Rolling Coder receiver, Ecosol board and 2-8Amp/Hour batteries • 1-24V Solar Panel with mounting brackets • 2 MITTO 2 rolling code transmitters • 1 pair of FL 130B photo eyes • Quick installation guides - English & Spanish
ECOSOL PHOBOS SOLAR-POWERED SYSTEM ITEM NUMBER
DESCRIPTION
VOLTAGE
LEAF WEIGHT
225.KERCR93524602 225.KERCR93524603 225.N999477
550 lb PHOBOS BT KIT SINGLE 24 V 550 lb PHOBOS BT KIT DUAL 24 V ECOSOL CHARGER HOME CHARGING SYSTEM
LEAF LENGTH
CONTROL UNIT
10’ 10’
LIBRA UL/CSA R LIBRA UL/CSA R
ACCESSORIES 225.N999473 - ECOSOL ROUND POST
© 2010 STEEL AND PIPES, INC.
MOUNTING BRACKET Bracket and stainless steel screws kit for mounting ECOSOL PANEL on post measuring 48 to 100 mm in diameter.
225.N999475 - ECOSOL SECURITY
ECOSOL SECURITY BOLTS TO AVOID THEFT OF SOLAR PANEL Anti-tamper stainless steel screws kit for ECOSOL PANEL and ECOSOL POST BR.
318
225.N999477 - ECOSOL CHARGER
100-230V - 24V battery charger for quick-charging from mains for ECOSOL BOX and ECOSOL DOUBLE.
225.D113732 - ECOSOL DOUBLE
Battery capacity expansion for ECOSOL BOX. Includes two 12V 7.2Ah batteries.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
225.D111750 MITTO 2 12VTwo
channel 12V rolling code remote control.
225.D111457 00002 PASSY ANTENNA MONO
Omni-directional 2,45 GHz antenna.
225.P111043 00001 - FL130B
Flat photocell receiver/ transmitter set for external application, range up to 100’ (30m) 24V power supply. Set of two
225.BFT-H-PB21K Key Switck-2-Keys
225.111456- PASSY TRANSPONDER
225.D113632 - AEL 433
433MHz antenna, 13’ cable.
225.BFT-SSU-PAM-2 Relay for Magnet Lock Interior or Exterior use
225.BFT-H-PB3SQE Square Red Push to Exit Button
225.BFT-H-PB4SQP Square Green Push to Exit Button
GATE OPERATORS & TELE-ENTRY DIVISION
ACCESSORIES
225.D113719 00003 RAY X 24V
24 Vdc strobe light with integrated antenna.
225.PB1200 Photo cell with reflector And hoot kit
225.D121016 - ECB DX
RH horizontal electric lock, 12V.
225.BFT 1200MAG
Magnetic Lock Exterior (1,200lb)
225.D121009 - PE2
External two-button panel
225.BFT-B1002G
P121011 - INTRO
225.BFTH1200LSDSDM
225.BFT-15-12v100
225.BFT-B1002
Flush mounted key switch.
Power Supply 12v 1 Amp
Magnetic Lock Interior(1,200lb)
Bracket for Magnetic Lock Interior
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
319
© 2010 STEEL AND PIPES, INC.
225.AA-26100L BFT Jey Pad Entry System
Bracket for Magnetic Lock Exterior
GATE OPERATORS & TELE-ENTRY DIVISION
6100/6300
SWING GATE OPERATORS
THE TIME TESTED 6000 SERIES RELIABLE AND LONG LASTING GATES UP TO 22FT
Model 6300
1/2 or 1 horsepower for gates up to 22’ long weighing up to 800 lbs.
The DKS 6000 series swing gate operators offer convenience, reliability and quiet operation in an aesthetically pleasing design. The unique design of these operators allow the gate arm to rotate from underneath the operator allowing the gate arm to attach to the bottom rail of the gate, were it is virtually unseen from outside the gate. This design allows the operator to be fully enclosed and prevents water from contaminating the output shaft, bearings and electronics. Additionally, the frame is built from G90 galvanized steel to prevent rusting. These operators can be installed directly on a concrete pad, or they can be post mounted to meet any installation requirements. MODEL
ITEM NUMBER
225.6300-081 225.6300-080 MODEL 6100 225.6100-081 225.6100-080 POST MOUNT 225.2600-674 SURFACE MOUNT 225.2600-264 MODEL 6300
Model 6100
1/2 horsepower for gates up to 14’ long weighing up to 500 lbs.
DESCRIPTION
DK SWING GATE OPER 1/2HP SLV 115V DK SWING GATE OPER 1/2HP MST 115V DK SWING GATE OPER 1/2HP 115V SEC DK SWING GATE OPER 1/2HP 115V PRI DK ACCESORY BOX POST MOUNT BLK DK ACCESORY BOX SURFACE MOUNT 6300
6002
SWING GATE ACTUATORS
GATE MOUNTED LOW VOLTAGE COMPACT DESIGN
(FOR LARGER GATES) MODEL 6002 ACTUATOR • • •
© 2010 STEEL AND PIPES, INC.
The DKS swing gate actuators offer convenience and reliability in a compact design. These actuators mount directly to your gate and pilaster, simplifying installation and eliminating the need for concrete pads. The powerful screw driven pistons in these actuators connect directly to the gate, eliminating weak mechanical connections and they are fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps.
MODEL
ITEM NUMBER
DESCRIPTION
MODEL 6200 CONTROL BOXES
225.6002-080 225.4302-111
DK SWING GATE DC ACTUATOR 14' DK CONTROL BOX & BOARD 6002/6400
320
For gates up to 14 feet Dimensions: 50” x 4” x 4” 90° in approximately 18 seconds
Control Boxes Deluxe and standard electronic controlboard microprocessor based with advanced features deluxe
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
standard
SLIDE GATE OPERATORS
RESIDENTIAL BUILT IN SAFETY FEATURES LIGHT DUTY COMMERCIAL The DKS 9050 and 9070 slide gate operators offer convenience, reliability and safe operation in a small, compact design. The 9050 operator is ideally used in residential applications while the 9070 can be used in both residential and light commercial applications. The innovative fail-safe design of these operators significantly reduces the chance of injury or entrapment and makes these operators the safest slide gate operators in the market today! Designed with versatility in mind, these operators can be configured for front, center or rear drive applications and can be pad or post mounted. MODEL
ITEM NUMBER
DESCRIPTION
MODEL 9070 MODEL 9050
225.9070-080 225.9050-080
DK SLIDE GATE OPER 1/2HP 115V LF DK SLIDE GATE OPER RESID 1/2 HP
Model 9050 • 1/2 horsepower for up to 16’ gates weighing up to 300 lbs
GATE OPERATORS & TELE-ENTRY DIVISION
9050/9070
Model 9070 • 1/2 horsepower for up to 22’ gates weighing up to 500 lbs
9100
SLIDE GATE OPERATORS
WORRY FREE BE HAPPY ABOUT THE SAFEST SELF ADJUSTING GATE OPERATOR The DKS 9100 & 9150 series of slide gate operators offer convenience, reliability and safe operation in a small, compact design. These operators can be used in residential, commercial or industrial high-use applications. The innovative fail-safe design of these operators significantly reduces the chance of injury or entrapment and makes these operators the safest slide gate operators in the market today. Designed with versatility in mind, these operators can be configured for front, center or rear drive applications and can be pad or post mounted.
ITEM NUMBER
DESCRIPTION
MODEL 9100
225.9100-080
DK SLIDE GATE OPER 1/2HP 115V
Model 9100 • 1/2 horsepower for up to 30’ gates weighing up to 1000 lbs
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
321
© 2010 STEEL AND PIPES, INC.
MODEL
GATE OPERATORS & TELE-ENTRY DIVISION
1835/1837
PC PROGRAMMABLE SYSTEM
Model 1837 Wall Mount
INTRODUCING ALL THE BELLS AND WHISTLES FROM A TO Z
• Eight line lcd display
The DKS 1830 series of telephone entry and access control systems are suited for a wide variety of applications. Simple to use, yet these PC programmable systems are sophisticated enough to provide service for up to 3000 users, control up to16 entry points and they can store the last 8000 events in their history buffer so you know the “three W’s” of access control: who, when, where. With expanded optional capabilities, you can even add true anti-pass back and elevator control. Utilizing there reliable technology DKS PC Programmable Telephone Entry Systems have used for over 15 years, you can now program online 24/7 giving you the freedom to work when and where you want. From remote book keeping and access, to security control on the ground–and everything in between. You even get confirmation to your PC so you always know when your transaction is done. A complete turn-key access management solution, along with a national dealer and support network of more than 4000 strong.
MODEL
ITEM NUMBER
MODEL1837 225.1837-089 MODEL1835 225.1835-140 225.1835-089
Model 1835 wall mount • Single line lcd display
DESCRIPTION
DKS WALL MNT 8 LINE PC PROG CARD DK MEMORY 25 PHONE CARDS APB DK WALL MNT DIR PC PROG HF CARD
1812 SERIES
SINGLE FAMILY INTERCOM SYSTEM
TELEPHONE INTERCOM SYSTEM THAT ALLOWS HOMEOWNERS TO USE THEIR TELEPHONE AS AN INTERCOM
© 2010 STEEL AND PIPES, INC.
The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door or gate. Visitors are easily identified by voice communication and can be granted or denied access directly from a touch-tone telephone. The 1812 is available in both surface and flush mount designs and includes the DKS auto-programming software for Windows, allowing homeowners to program the system right from their home computer.
MODEL
ITEM NUMBER
DESCRIPTION
MODEL 1812
225.1812-088
DK WALL MOUNT STAINLESS STEEL
Surface mount
*This item is available by order only
Flush mount *This item is available by order only
Wall mount
322
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
1601 Barrier Gate
BARRIER GATE OPERATORS
Designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage. 1/2 HP continuous-duty motor. 40:1 gear-box running in a continuous oil bath. Arm rotates 90° in approximately 1.5 seconds.
1602 Barrier Gate *This item is available by order only
Model 1601
Model 1602
*This item is available by order only MODEL
ITEM NUMBER
DESCRIPTION
MODEL 1601
225.1601-242 225.1601-216 225.1601-093 225.1601-080
DK HARDWARE KIT FOR ALUMINUM ARM DK ARM ALUMINUM ASSY DK FAN KIT 1601 DK PARKING GATE 1/2HP 115V
1 HP continuous-duty motor. 60:1 gear-box running in a continuous oil bath. Arm rotates 90° in approximately 5.5 seconds.
*This item is available by order only
GATE ACCESSORIES DK KEYBOX-ACE KEY ITEM NUMBER
DESCRIPTION
225.1210-080
DK KEYBOX-ACE KEY 1210-080 • Provides convenience and security for basic access control applications. • Designed for outdoor or indoor use. • Can be post or surface mounted. • Steel cabinets and stainless steel faceplate. • Two keys supplied with each unit.
Model 1210
• Mortise cylinders used on 1207 and 1209 models. Ace cylinder used on 1210 model. • Intercom Option on model 1209 includes a speaker and push button for connection to an existing intercom system. • Each key switch is housed in a rugged steel cabinet with a stainless steel faceplate making these switches vandal resistant.
STANDARD GOOSENECK ACCESS CONTROL ITEM NUMBER
DESCRIPTION
225.1200-046
DK KEYPOST 64.5 GOOSENECK (LONG) DK KEYPOST 44.0 GOOSENECK (SHORT)
225.1200-045
ARCHITECTURAL STYLE OFFSET MOUNT ITEM NUMBER
DESCRIPTION
225.1200-046
DK KEYPOST 64.5 GOOSENECK (LONG) DK KEYPOST 44.0 GOOSENECK (SHORT)
225.1200-045
• Pad mounting bolts directly on to existing concrete • In-ground adapter when a concrete pad is not available or unwanted • Baked on crinkle coat enamel provides a durable and weather resistant finish
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
323
© 2010 STEEL AND PIPES, INC.
MODEL 1602
Designed for traffic lanes up to 28-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
GATE OPERATORS & TELE-ENTRY DIVISION
1600 SERIES
GATE OPERATORS & TELE-ENTRY DIVISION
GATE ACCESSORIES CONTROL STATIONS - GATE ACCESSORIES
MODEL
• • • •
ITEM NUMBER
DESCRIPTION
225.1200-007 225.1200-017
DK THREE BUTTON STATION SNGL GANG DK SWITCHPLATE ASSY OPEN/HOLD
Controls mount into a single-gang electrical box Stainless steel faceplates Key switch uses mortise cylinder – can be re-keyed Keypad available as a stand-alone device or can be connected to a wiegand controller
SURGE PROTECTORS ITEM NUMBER
225.1878-010 225.1877-010 225.1876-010
DESCRIPTION
DK PCB SURGE PROTECTOR LOWAccess VOLTAGE DK PCB SURGE PROTECTOR PHONE LINE DK PCB SURGE PROTECTOR HI VOLTAGE
• Surge Protectors are available for low voltage; high voltage and telephone line and help protect equipment from transient voltage spikes.
VEHICULAR LOOP DETECTOR SYSTEMS ITEM NUMBER
225.9410-010 225.9409-010
DESCRIPTION
DK LOOP DETECTOR SINGLE DOORKING DK LOOP DETECTOR DUAL DOORKING
• Plug-in detectors (DKS gate operators only) and hard wired detectors • Single and dual channel • Pre-fabricated loops, 24 ft circumference and 50 foot lead-in • Pre-fabricated loops available or form your own loops
PRE-FABRICATED GROUND LOOPS ITEM NUMBER
225.9401-062 225.9401-061 225.9401-060
DESCRIPTION
DK LOOP GROUND PREFAB RED WIRE DK LOOP GROUND PREFAB YELLOW WIRE DK LOOP GROUND PREFAB BLUE WIRE
• Prefabricated Ground Loops are wired with XLPE insulated wire and are placed in the roadway prior to concrete being poured.
© 2010 STEEL AND PIPES, INC.
PHOTO-BEAM ITEM NUMBER
DESCRIPTION
225.8080-031
DK SAFETY PHOTO THRU BEAM ASSY
• Photo-beams provide non-contact protection and will stop or reverse a gate when the beam is broken.
324
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS
DIVISION
CHAMBERLAIN
速
GARAGE DOORS & OPERATORS DIVISION
GARAGE DOOR OPENERS & ACCESSORIES Integrated Battery Backup Feature
Powerful, 3/4 HPS®* DC motor with belt drive
WHISPER DRIVE PLUS WD962KD BELT DRIVE MOTOR ITEM NUMBER
DESCRIPTION
225.CHA.WD962KD
3/4 HPS DC MOTOR - WHISPER WD962KD
• Ultra-quiet belt drive system is as tough as a steel-belted tire • EverCharge® Standby Power System operates garage door for up to 20 full cycles while the power is out • 200 watts of light fully illuminate the garage • Premium accessories included: -Two 3-Button Remote Controls Motion -Detecting Control Panel -Wireless Keyless Entry System * Horsepower strength with lifting force equivalent to 3/4 HP AC motor garage door openers.
INCLUDES:
* BELT DRIVE
225.CHA.953D
Security-Multi-Function 3-Button Remote Control-315Mhz
225.CHA.940D
Wireless Keyless Entry System
225.CHA.935CB
Motion-Detecting Control Panel
225.CHA.801CB
IR System Kit w/ brackets- SAFETY SENSORS
18
Powerful, 1/2 HP motor with industrial-strength, rugged chain drive • 100 watts of lighting for added safety • Premium accessories included: - 1-Button Remote Control - Multi-Function Control Panel
* CHAIN DRIVE
INCLUDES: © 2010 STEEL AND PIPES, INC.
1-Button Remote Control
Multi-Function Control Panel
MODEL PD210D CHAIN DRIVE MOTOR
326
ITEM NUMBER
DESCRIPTION
225.CHA.PD210D
1/2 HP MOTOR-RUGGED PD210D
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
GARAGE DOOR OPENERS & ACCESSORIES
225.CHA.955D
Universal Receiver • Converts any brand of garage door opener to Security+® Rolling Code Technology • Includes one 3-button remote transmitter • Compatible with all Chamberlain® 315 MHz transmitters
225.CHA.CLDM1 225.CHA.942FP
Universal Fingerprint Keypad • Reads up to 10 unique fingerprints • No code, no keys, no wires • Perfect for children who can't remember codes • Weatherproof slide-up protective cover
Garage Door Monitor Kit • Notifies you if your garage door is open or closed • Works with ANY garage door • Fast, easy installation; no tools required • Flashes red light when door is open • Monitors up to 4 garage doors with additional sensors (CLDM2)
225.CHA.801CB
Replacement Safety Sensors • Prevents your garage door from closing on people, pets or objects • Replaces damaged safety sensors • Includes 2 sensors and mounting brackets and hardware • Fits Chamberlain® garage access systems manufactured after 1997
225.CHA.CLLAD
Plug-In Remote Light Control • Turns on/off lights or appliances using handheld remote control • Installs in seconds
225.CHA.4228
EverCharge® Standby Power System • Replacement battery for Chamberlain® Battery Backup Whisper Drive® Plus Garage Access Systems
CLICKER® UNIVERSAL ACCESSORIES
Replaces Chamberlain®, LiftMaster®, Craftsman®, Genie®, Wayne, Dalton® brands, among others. 225.CHA.KLIK1U
225.CHA.CLULP1
Universal Laser Parker • Laser guidance system projects a beam down onto car for perfect parking every time • Takes the guesswork out of parking and complements any garage access system • Easy to install • Up to two laser parking assists can work with one garage door opener • Works with any brand of garage door openers
UNIVERSAL Clicker® Remote • Works on all major brands of garage door opener units manufactured after 1993 that uti I ize photo-eye sensors • Programs in seconds • Operates up to two different brands of garage door openers or gates at one time • Attaches to your car visor
225.CHA.KLIK2U
UNIVERSAL Clicker® Keypad • Works on all major brands of garage door opener units manufactured after 1993 that utilize photo-eye sensors • Programs in seconds • Allows for programmable personal identification code • Illuminated keys for nighttime use • Easy to install; no wiring needed
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
327
© 2010 STEEL AND PIPES, INC.
18
COMPLEMENTARY ACCESSORIES
GARAGE DOORS & OPERATORS DIVISION
18
REPLACEMENT ACCESSORIES GARAGE DOOR OPENERS & ACCESSORIES
For Chamberlain® Garage Access Systems manufactured -after 2005
For Chamberlain® Garage Access Systems manufactured -prior to 2005
225.CHA.953D
Security +3-Button Remote 315Mhz
• Security+® Rolling Code Technology • Opens up to three garage doors
225.CHA.956D
225.CHA.950-315CB
Security + 3 button MINI -Key Remote 315Mhz
Security+ 1-Button Remote 315Mhz
• Full functionality of standard 3-button remote but small enough so you can carry it in your purse, pocket or on your keychain
HARDWARE ACCESSORIES GARAGE DOOR OPENERS & ACCESSORIES
225.CHA.7708CB
8' Chain Drive Rail Extension • For 8' high garage doors • Compatible with all Chamberlain® chain drive garage door openers with a Quick-Install Rail System
8' Belt Drive Rail Extension • For 8' high garage doors • Compatible with all Chamberlain® belt drive garage door openers with a Quick-Install Rail System
225.CHA.7710CB
225.CHA.8810CB
© 2010 STEEL AND PIPES, INC.
10' Chain Drive Rail Extension • For 10' high garage doors • Compatible with all Chamberlain® chain drive garage door openers with a Quick-Install Rail System
328
225.CHA.8808CB
10' Belt Drive Rail Extension • For 10' high garage doors • Compatible with all Chamberlain® belt drive garage door openers with a Quick-Install Rail System
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
REPAIR PARTS
MOTOR UNIT ASSEMBLY PARTS FOR BELT DRIVEN WHISPER DRIVE PLUS WD962KD MOTOR
10
KEY NO.
1 2 3 4
5 6
PART NO.
41C76 41B4245 41B4375-3 41A6281 41A6282 41A6327 41A6328 410794 410B002-2
DESCRIPTION
Belt cap and sprocket Line cord Terminal block with screws Wire harness kit Complete with: Battery wires and plug Light socket wires and plug RPM/passpoint wires with plug Motor with travel module Receiver logic assembly
KEY NO.
PART NO.
DESCRIPTION
7
41A6231
8 9 10 11
41C190 410504-5 108079 175B88
End panel with battery door and screw Transformer and harness Cover Light lens Light socket
41A6357-1
NOT SHOWN Battery kit
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
329
© 2010 STEEL AND PIPES, INC.
18
GARAGE DOORS & OPERATORS DIVISION
18
REPAIR PARTS
FOR BELT DRIVEN WHISPER DRIVE PLUS WD962KD MOTOR RAIL ASSEMBLY PARTS .
/
2 3
KEY NO.
5
1 2 3 4 5 6 7
PART NO. 4A1008 41C5141-2 41A5665-2 4184103 144C54 41A5250 410598-1 183A163
DESCRIPTION Master link kit Complete trolley assembly Complete rail Spring trolley nut Idler pulley Full belt assembly "U" bracket NOT SHOWN Wear pads
INSTALLATION PARTS
2 1
5 10
KEY NO.
PART NO.
1 2 3 4 5 6 7 8 9
41 C472-7 9530 10A20 298137 41A2828 4184494-1 41A5047-1 41A5047-3 41A5034
10 11 12 13
178834 178835 41A5266-1 41A6357-1
© 2010 STEEL AND PIPES, INC.
41A5257-10 128776 114A3282 114A3282SP
330
DESCRIPTION Motion detecting control console 3-8utton remote control 3V2032 Lithium battery Remote control visor clip Emergency release rope and handle assembly 2-Conductor bell wire, white and white/red Door bracket w clevis pin & fastener Header bracket w/clevis pin & fastener Safety reversing sensor kit (receiving and sending eyes) with 3' (.9 m) 2-conductor bell wire Straight door arm section Curved door arm section Safety reversing sensor brackets (2) Battery NOT SHOWN Installation hardware bag (includes hardware listed on page 7) Hanging brackets Owner's manual Owner's manual - Spanish
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
MOTOR UNIT ASSEMBLY PARTS FOR MODEL PD210D CHAIN DRIVE MOTOR
KEY NO. 1 2
PART NO. 41A5615 41C4220A
3
41A2817
4 5
4184245 41A5484-1
410181 6 7 8 9 10 11 12
4A1344 108079 308532 12A373 41A3150 41A5525-5 4103452
DESCRIPTION Chain Spreader Gear and sprocket assembly Complete with: Spring washer, thrust washer, retaining ring, bearing plate, roll pins (2), drive gear and worm gear, helical gear with retainer and grease Orive/worm gear kit with grease, roll pins (2) Line cord End panels with all labels (P06100/P06120/P0612KL017920KO 489300) End panels with all labels (P02100/P02120/248730) Light socket Lens 1/2 hp Capacitor Capacitor bracket Terminal block with screws Cover Limit switch assembly
KEY PART NO. NO. 13 4103058
14 15 16 17
41A2818 41A2822-1 41C4398A 41 AC050-1
41
AC050-2
18
41C5497 41C5498 410180-1
19
41A5484-1
41A2826 41A2825
DESCRIPTION Universal replacement motor and bracket assembly Complete with: Motor, worm, bracket, bearing assembly, RPM sensor Limit switch drive and retainer Interrupter cup assembly RPM sensor assembly Receiver logic board assembly (P02100/P02120/248730) Receiver logic board assembly (P06100/P06120/P0612KL0/7920KO 489300) Complete with: Logic board,end panel with all labels, light socket High voltage wire harness assembly Low voltage wire harness assembly End panels with all labels (P06100/P06120/P0612KL0/7920KO 489300) End panels with all labels (P02100/P02120/248730) NOT SHOWN Motor shaft bearing kit Opener assembly hardware kit
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
331
© 2010 STEEL AND PIPES, INC.
REPAIR PARTS
GARAGE DOORS & OPERATORS DIVISION
REPAIR PARTS
FOR MODEL PD210D CHAIN DRIVE MOTOR PART NO.
DESCRIPTION
4A1008 41 C5141-1 183C158-13 183C157-9 144C56 41A5807 120598-1
Master link kit Complete trolley assembly Rail - front (header) section Rail - center/back section Chain idler pulley Chain and cable "U" bracket
183A163 19A47
NOT SHOWN Wear pads Cover protection bolt spacer
KEY NO.
PART NO.
DESCRIPTION
1 2 3 4 5 6 7 8 9 10 11 12 13
41C494-2 9500 9530 10A20 29B137 41A2828 41B4494-1 41A5047-2 41A5047-1 178B35 178B34 12B776 41A5034
14 15
41A5266-1 41A4166
KEY NO.
1 2 3 4 5 6 7
4
INSTALLATION PARTS
2 5 3 7
10
12
© 2010 STEEL AND PIPES, INC.
14
332
41A5258-11 114A3165 11 4A3163
Multi-function door control panel Single-button remote control 3-button remote control 3V2032 Lithium battery Transmitter visor clip Emergency release rope and handle assembly 2-conductor bell wire - white and white/red Header bracket with clevis pin and fastener Door bracket with clevis pin and fastener Curved door arm section Straight door arm section Hanging bracket Safety sensor kit (receiving and sending eyes) with 3'(.9m) 2-conductor bell wire attached Safety sensor brackets (2) Door Control Button NOT SHOWN Installation hardware bag Assembly/installation manual Installation instructions for one-piece doors
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
GARAGE DOORS 18
by
RESIDENTIAL GARAGE DOORS
• Translucent • Light weight • Transmit up to 73 % of clarity of the solar light
3 COLORS TO CHOOSE
Z.GARAGE Z.GARAGE Z.GARAGE • Bronze
• White
• Stainless steel
Z.GARAGE Z.GARAGE Z.GARAGE Z.GARAGE
DESCRIPTION AND COLORS POLYDOOR- WHITE/PEEL POLYDOOR- WHITE/PEEL POLYDOOR- BRZ/BRZ POLYDOOR- WHITE/PEEL POLYDOOR- WHITE/PEEL POLYDOOR- CLEAR/PEEL POLYDOOR- WHITE/PEEL POLYDOOR- CLEAR/PEEL POLYDOOR- BRZ/BRZ POLYDOOR- WHITE/PEEL POLYDOOR- CLEAR/PEEL POLYDOOR- BRZ/BRZ
SIZES AVAILABLE WIDE TALL 18’-0” 18’-0” 17’-0”
x x x
7’-0” 8’-0” 7’-0”
17’-0” 9’-0” 9’-0”
x x x
8’-0” 7’-6” 7’
9’-0”
x
8’
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
333
© 2010 STEEL AND PIPES, INC.
ITEM CODE
GARAGE DOORS & OPERATORS DIVISION
GARAGE DOOR HARDWARE KIT for
HARDWARE CARTONS FOR POLYDOORS GARAGE DOORS
TRACKS AND TORSIONS
ITEM NUMBER
R STOCK
DESCRIPTION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPZZ-80170 DF 17 X 8-0 POLY CARB BRNZ/BRNZ 225.HPSH-80170 HD 17 X 8-0 POLY CARB 12" TORSION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPZZ-70170 DF 17 X 7-0 POLY CARB BRNZ/BRNZ 225.HPSH-70170 HD 17 X 7-0 POLY CARB 12" TORSION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPWP-70180 DF 18 X 7-0 POLY CARB WHITE/PEEL 225.HPSH-70180 HD 18 X 7-0 POLY CARB 12" TORSION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPWP-80180 DF 18 X 8-0 POLY CARB WHITE/PEEL 225.HPSH-80180 HD 18 X 8-0 POLY CARB 12" TORSION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPCP-76090 DF 9 X 7-6 POLY CARB CLEAR/PEEL 225.HPSH-76090 HD 9 X 7-6 POLY CARB 12" TORSION
GARAGE DOOR-POLYDOOR HARDWARE KIT
225.GPWP-76090 DF 9 X 7-6 POLY CARB WHITE/PEEL 225.HPSH-76090 HD 9 X 7-6 POLY CARB 12" TORSION
RS GARAGE DOO SE U O WAREH
IN STEEL AND PIPES
© 2010 STEEL AND PIPES, INC.
WE HAVE THE ITEMS YOU ARE LOOKING FOR ALWAYS IN STOCK. IF WE DON’T, WE CAN GET IT FOR YOU
334
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
PREMIUM GARAGE DOORS-RESIDENTIAL Traditional Series “PROTÉGÉ” by Richards-Wilcox
18
It has a rich wood grain texture, pre-finished steel on both sides, technologically advanced polyurethane insulating core (R-value = 12) and quality hardware components that make this door a great choice for your home. The Protégé is backed by our Lifetimer™ Warranty.
RANCH SECTIONS(1) CODE NUMBER
DESCRIPTION
225.PFRW-18180-L 225.PFRW-18200-L 225.PFRW-21180-L 225.PFRW-21200-L 225.PFRW-18120-L 225.PFRW-18140-L 225.PFRW-18160-L 225.PFRW-21090-L 225.PFRW-21100-L 225.PFRW-21120-L 225.PFRW-21140-L 225.PFRW-21160-L 225.PFRW-18090-L 225.PFRW-18100-L
SB-R 18 X 18 PRO-FP (4) WHT RNC SB-R 20 X 18 PRO-FP (5) WHT RNC SB-R 18 X 21 PRO-FP (4) WHT RNC SB-R 20 X 21 PRO-FP (5) WHT RNC SB-R 12 X 18 PRO-FP (3) WHT RNC SB-R 14 X 18 PRO-FP (3) WHT RNC SB-R 16 X 18 PRO-FP (4) WHT RNC SB-R 9 X 21 PRO-FP (2) WHT RNC SB-R 10 X 21 PRO-FP (2) WHT RNC SB-R 12 X 21 PRO-FP (3) WHT RNC SB-R 14 X 21 PRO-FP (3) WHT RNC SB-R 16 X 21 PRO-FP (4) WHT RNC SB-R 9 X 18 PRO-FP (2) WHT RNC SB-R 10 X 18 PRO-FP (2) WHT RNC
SECTIONS(1) CODE NUMBER
DESCRIPTION
225.PFFW-21180 225.PFFW-21200 225.PFFW-24180 225.PFFW-24200 225.PFFW-21090 225.PFFW-21100 225.PFFW-21120 225.PFFW-21140 225.PFFW-21160 225.PFFW-24090 225.PFFW-24100 225.PFFW-24120 225.PFFW-24140 225.PFFW-24160
SB-R 18 X 21 PRO-FP WHITE FLUSH SB-R 20 X 21 PRO-FP WHITE FLUSH SB-R 18 X 24 PRO-FP WHITE FLUSH SB-R 20 X 24 PRO-FP WHITE FLUSH SB-R 9 X 21 PRO-FP WHITE FLUSH SB-R 10 X 21 PRO-FP WHITE FLUSH SB-R 12 X 21 PRO-FP WHITE FLUSH SB-R 14 X 21 PRO-FP WHITE FLUSH SB-R 16 X 21 PRO-FP WHITE FLUSH SB-R 9 X 24 PRO-FP WHITE FLUSH SB-R 10 X 24 PRO-FP WHITE FLUSH SB-R 12 X 24 PRO-FP WHITE FLUSH SB-R 14 X 24 PRO-FP WHITE FLUSH SB-R 16 X 24 PRO-FP WHITE FLUSH
(1) THESE CODES ARE FOR SECTIONS ONLY.
NOTE: TO ORDER A COMPLETE DOOR, THE SIZE AND MODEL IS REQUIRED.
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
335
© 2010 STEEL AND PIPES, INC.
FLUSH
GARAGE DOORS & OPERATORS DIVISION
COLONIAL SECTIONS(1) CODE NUMBER*
DESCRIPTION
225.PFCW-21180-L 225.PFCW-21200-L 225.PFCW-24180-L 225.PFCW-24200-L 225.PFCW-21090-L 225.PFCW-21100-L 225.PFCW-21120-L 225.PFCW-21140-L 225.PFCW-21160-L 225.PFCW-24090-L 225.PFCW-24100-L 225.PFCW-24120-L 225.PFCW-24140-L 225.PFCW-24160-L
SB-R 18 X 21 PRO-FP (8) WHT COL SB-R 20 X 21 PRO-FP (9) WHT COL SB-R 18 X 24 PRO-FP (8) WHT COL SB-R 20 X 24 PRO-FP (9) WHT COL SB-R 9 X 21 PRO-FP (4) WHT COL SB-R 10 X 21 PRO-FP (4) WHT COL SB-R 12 X 21 PRO-FP (5) WHT COL SB-R 14 X 21 PRO-FP (6) WHT COL SB-R 16 X 21 PRO-FP (7) WHT COL SB-R 9 X 24 PRO-FP (4) WHT COL SB-R 10 X 24 PRO-FP (4) WHT COL SB-R 12 X 24 PRO-FP (5) WHT COL SB-R 14 X 24 PRO-FP (6) WHT COL SB-R 16 X 24 PRO-FP (7) WHT COL
*GLASS NOT INCLUDED
RIBBED SECTIONS(1) CODE NUMBER
DESCRIPTION
225.PFVW-21090 225.PFVW-24090 225.PFVW-21180 225.PFVW-24180
SB-R 9 X 21 PRO-FP WHITE V-RIB SB-R 9 X 24 PRO-FP WHITE V-RIB SB-R 18 X 21 PRO-FP WHITE V-RIB SB-R 18 X 24 PRO-FP WHITE V-RIB
SIZES AVAILABLE ITEM CODE
Z.GARAGE Z.GARAGE
WIDE
DESCRIPTION
PROTEGE INSULATED DOOR PROTEGE INSULATED DOOR
FROM 8’ UP TO 20’ FROM 8’ UP TO 20’
TALL
FROM 6’-6” TO 7’-0” FROM 7’-3” TO 8’-0”
AVAILABLE IN WHITE. OTHER COLORS AVAILABLE BY ORDER ONLY.
© 2010 STEEL AND PIPES, INC.
For accuracy of color matching, use actual product sample. White
Almond
Taupe
Brown
(1) THESE CODES ARE FOR SECTIONS ONLY. NOTE: TO ORDER A COMPLETE DOOR, THE SIZE AND MODEL IS REQUIRED.
336
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
FRAMES FOR GLASS OR ACRYLIC AND DECORATIVE INSERTS ITEM NUMBER
DESCRIPTION
225.330-425 225.31W-501
P 20 WHITE FRAME FOR SGL GLASS P 44 WHITE FRAME FOR SGL GLASS
RANCH STYLE - DECORATIVE INSERTS Available in single, double and obscure units. Glass or Acrylic.
225.550-313 - STOCKTON RANCH
225.550-305 - SUNBURST
225.550-341 - ARCHED STOCKTON
225.550-347 - WATERTON RANCH
225.550-321 - CASCADE RANCH
COLONIAL STYLE - DECORATIVE INSERTS 225.550-309 - STOCKTON
225.550-451 - PRAIRIE
225.550-301 - SUNBURST
225.550-337 - WATERTON
225.550-325 - SHERWOOD
225.550-317 - CASCADE
(AVAILABLE IN 4-9 PIECE DESIGN)
225.550-329 - CATHEDRAL
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
337
© 2010 STEEL AND PIPES, INC.
Available in single, double and obscure units. Glass or Acrylic.
GARAGE DOORS & OPERATORS DIVISION
GARAGE DOOR PARTS AND HARDWARE for
18
We carry extension or torsion springs, the hardware carton(rollers, cable, fasteners, pulleys, sheaves, forks, straps, top and bottom brackets, etc.) tracks, bottom retainer and seal, caps and other garage doors hardwears and accessories.
BOTTOM RETAINER ITEM NUMBER
DESCRIPTION
225.328-722 225.328-723 225.328-724 225.328-725 225.328-726 225.328-727
PRO-FP BOTTOM RET 8'-11.75" PRO-FP BOTTOM RET 9'-11.75" PRO-FP BOTTOM RET 11'-11.75" PRO-FP BOTTOM RET 13'-11.75" PRO-FP BOTTOM RET 15'-11.75" PRO-FP BOTTOM RET 17'-11.75"
3” BLACK BOTTOM SEAL ITEM NUMBER
DESCRIPTION
225.152-313
PRO-FP 3" BLACK BOTTOM SEAL
VERTICL TRACK FOR DOORS UP TO 8’H ITEM NUMBER
DESCRIPTION
225.431-1863 225.431-1864 225.431-1873 225.431-1874
6-3 X 2" RES TRK 16GA LH (75") 6-3 X 2" RES TRK 16GA RH (75") 7-3 X 2" RES TRK 16GA LH (87") 7-3 X 2" RES TRK 16GA RH (87")
© 2010 STEEL AND PIPES, INC.
END CAPS 18”, 21” AND 24”
338
ITEM NUMBER
DESCRIPTION
225.426-0560 225.426-0561 225.426-0562 225.426-0563 225.426-0564 225.426-0565
18" GALV ENDCAP PRO-FP LH 18" GALV ENDCAP PRO-FP RH 21" GALV ENDCAP PRO-FP LH 21" GALV ENDCAP PRO-FP RH 24" GALV ENDCAP PRO-FP LH 24" GALV ENDCAP PRO-FP RH
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
ITEM NUMBER
DESCRIPTION
225.5-1004 225.5-1013 225.5-1017 225.5-1022 225.5-1031 225.5-1032 225.5-1034 225.5-1035 225.5-1036 225.5-1037 225.5-1042 225.5-1045 225.5-1053 225.5-1055 225.5-1057 225.5-1059 225.5-1060 225.5-1064 225.5-1065 225.5-1073 225.5-1077 225.5-1094 225.5-1095 225.5-1116 225.5-1118 225.5-1119 225.5-1144 225.5-1148 225.5-1149
.207 x 2 x 20" CONED LH YELLOW .218 x 2 x 21" CONED RH WHITE .218 x 2 x 23.25" CONED RH WHITE .225 x 2 x 22.5" CONED LH RED .250 x 2 x 32.13" CONED RH GOLD .234 x 2 x 24.5" CONED LH BRN .234 x 2 x 26" CONED LH BROWN .234 x 2 x 26" CONED RH BROWN .243 x 2 x 27" CONED LH GREEN .243 x 2 x 27" CONED RH GREEN .243 x 2 x 28.5" CONED LH GREEN .243 x 2 x 29.5" CONED RH GREEN .250 x 2 x 27.5" CONED RH GOLD .250 x 2 x 29" CONED RH GOLD .250 x 2 x 30" CONED RH GOLD .250 x 2 x 31" CONED RH GOLD .262 x 2 x 31.5" CONED LH BLUE .262 x 2 x 35.8" CONED LH BLUE .262 x 2 x 35.8" CONED RH BLUE .273 x 2 x 38" CONED RH ORANGE .273 x 2 x 40" CONED RH ORANGE .234 x 2 x 29" CONED LH BROWN .234 x 2 x 29" CONED RH BROWN .218 x 2 x 26.5" CONED LH WHITE .262 x 2 x 34.5" CONED LH BLUE .262 x 2 x 34.5" CONED RH BLUE .225 x 2 x 26" CONED LH RED .234 x 2 x 27" CONED LH BROWN .234 x 2 x 27" CONED RH BROWN
GARAGE DOORS & OPERATORS DIVISION
18
SPRINGS FOR ALL SIZES DOORS
RES TRUSS 20GA GALV. FOR DOORS UP TO 8’H ITEM NUMBER
DESCRIPTION
225.431-0186 225.431-0187 225.431-0188 225.431-0189
RES TRUSS 20GA GALV 13'-4.5" RES TRUSS 20GA GALV 15'-4.5" RES TRUSS 20GA GALV 17'-4.5" RES TRUSS 20GA GALV 20'-0"
HORIZONTAL TRACK GA16 & GA13 FOR DOORS UP TO 8’H ITEM NUMBER
DESCRIPTION
225.431-3100 225.431-3101 225.431-3102 225.431-3103 225.431-3104 225.431-3105 225.431-3114 225.431-3115
7' HORZ TRACK 12"R 16GA LH 7' HORZ TRACK 12"R 16GA RH 7' HORZ TRACK 12"R 13GA LH 7' HORZ TRACK 12"R 13GA RH 8' HORZ TRACK 12"R 13GA LH 8' HORZ TRACK 12"R 13GA RH 8' HORZ TRACK 12"R 16GA LH 8' HORZ TRACK 12"R 16GA RH
TUBE SHAFT 16GA GALV. FOR DOORS UP TO 8’H ITEM NUMBER
225.950-230 225.950-231 225.950-232 225.950-233 225.950-234 225.950-235 225.950-236
DESCRIPTION
1" TUBE SHAFT 10'-0" 16GA GALV 1" TUBE SHAFT 11'-0" 16GA GALV 1" TUBE SHAFT 13'-0" 16GA GALV 1" TUBE SHAFT 15'-0" 16GA GALV 1" TUBE SHAFT 17'-0" 16GA GALV 1" TUBE SHAFT 19'-0" 16GA GALV 1" TUBE SHAFT 22'-0" 16GA GALV
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
339
© 2010 STEEL AND PIPES, INC.
18
GARAGE DOORS & OPERATORS DIVISION © 2010 STEEL AND PIPES, INC.
18
340
HARDWARE CARTONS FOR DOORS UP TO 20’L ITEM NUMBER
DESCRIPTION
225.6-0102 225.6-0103 225.6-0104 225.6-0106 225.6-0107 225.6-0108 225.6-0109 225.6-0112 225.6-0122 225.6-0113 225.6-0123 225.6-0114 225.6-0124 225.6-0116 225.6-0126 225.6-0117 225.6-0127 225.6-0118 225.6-0128 225.6-0119 225.6-0129
HC 2C x 7 FP TORSION HC 3C x 7 FP TORSION (NH) HC 3C x 7 FP TORSION (NH) 12' HC 4C x 7 1-Z FP TORSION HC 5C x 7 1-Z FP TORSION HC 5C x 7 2-Z FP TORSION HC 6C x 7 2-Z FP TORSION HC 2C x 8 (4) FP TORSION HC 2C x 8 (5) FP TORSION HC 3C x 8 (4) FP TORSION HC 3C x 8 (5) FP TORSION HC 3C x 8 (4) FP TORSION 12' HC 3C x 8 (5) FP TORSION 12' HC 4C x 8 (4) 1-Z FP TORSION HC 4C x 8 (5) 1-Z FP TORSION HC 5C x 8 (4) 1-Z FP TORSION HC 5C x 8 (5) 1-Z FP TORSION HC 5C x 8 (4) 2-Z FP TORSION HC 5C x 8 (5) 2-Z FP TORSION HC 6C x 8 (4) 2-Z FP TORSION HC 6C x 8 (5) 2-Z FP TORSION
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
STEEL RESIDENTIAL GARAGE DOORS RAYNOR*
18
Designed to provide unsurpassed character in a maintenance-free design, RockCreeke overlay garage doors feature an environmentally stable trim board material to achieve a carriage house look. With a long-lasting vinyl capstock, this trim board material has an attractive appearance that holds up over time. The material technology can utilize "reclaimed" wood fiber and vinyl from post-production processes, helping to save natural resources.
1-car with A bucks & 3-over-3 pane windows with Fleur-De-Lis style Decorative Hardware
1-car with X bucks & 3-over-3 pane arched windows
1-car with A bucks & 3 pane windows
2-car with 1 pane windows
White
Almond
1-car with 1 pane arched windows & Fleur-De-Lis style Decorative Hardware
1-car with X bucks & 3 pane windows
Claytone
*THIS COLECTION IS AVAILABLE BY ORDER ONLY
Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
341
© 2010 STEEL AND PIPES, INC.
For accuracy of color matching, use actual product sample.
GARAGE DOORS & OPERATORS DIVISION
Door Widths Heights Construction Section Thickness Material Surface Texture Insulation R-Value Thermal Break Door Styles Base Section Colors Overlay Trim Color Track Finish Glass Type # of Lites Across Pane Pattern Section Warranty Overlay Trim Standard Hardware & Springs Raynor EnduraCote™ Hardware & Springs Windload
RockCreeke 8'-0", 9'-0", 10'-0", 12'-0", 16'-0", 18'-0 (Accordion Style only available in 12'-0") 6'-0", 6'-6", 7'-0", 7'-6", 8'-0", 8'-6", 9'-0", 9'-6", 10' 4 Layer (Steel, Insulation, Steel, Overlay Trim) 2" 25-Gauge Galvanized Steel Embossed Woodgrain Polyurethane 12 Yes Simulated Swing-Out, Bi-fold, Accordion (12' only) White, Almond, ClayTone White Galvanized (standard) or EnduraCote™ White Powdercoat (optional) Clear 1/8" DSB (standard) or 1/8" water glass, clear insulated or water glass insulated (options) Single Car: 2, 12' Accordion: 3, Double Car: 4 1 pane, 1 pane arched, 3 pane, 3-over-3 pane, 3-over-3 pane arched For As Long As You Own Your Home - Rust-Through Delamination: 5 Years, Discoloration: 10 years 5 Years For As Long As You Own Your Home Available
© 2010 STEEL AND PIPES, INC.
Raynor RockCreeke Limited Warranty* Door sections are warranted against rust-through for “As Long As You Own Your Home.” Trim boards are warranted against delamination for a period of five (5) years and discoloration for a period of ten (10) years. Powdercoated track and hardware are warranted against defects in materials and workmanship for “As Long As You Own Your Home,” while galvanized track and hardware are warranted against defects in materials and workmanship for a period of five (5) years.
342
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GARAGE DOORS & OPERATORS DIVISION
COMMERCIAL ROLLING DOORS by RAYNOR*
18
DURACOIL OPTIMA Designed for high-security applications or oversized openings, sturdy 18-gauge slats and structural steel guides combine to make this our strongest rolling service door.
FireCoil - Fire-Rated Rolling Doors
Where safety and fire protection are crucial, choose FireCoil. Raynor FireCoil doors are the standard for facilities that require a listed fire door in a rated firewall. FireCoil doors are provided with fusible links that automatically release to close the door at 165°F. The door’s descent can also be triggered by smoke and heat detectors,a building’s alarm system,or solid-state release devices. FireCoil doors are UL,C-UL and CSFM-labeled.
FIRECOIL OPTIMA With a four-hour rating and 18-gauge steel slats,this model is the best choice for optimum fire protection and maximum security.
FIRECOIL STANDARD
*THIS COLECTION IS AVAILABLE BY ORDER ONLY Tel: (787) Tel:747-9415 (787) 747-9415 • Fax: •(787) Fax:747-8986 (787) 747-8986 • Email: • www.steelandpipes.com
343
© 2010 STEEL AND PIPES, INC.
This full-featured,competitively priced product is designed to exceed industry guidelines with a UL four-hour rating.
GARAGE DOORS & OPERATORS DIVISION
SECTIONAL RIBBED DOORS COMMERCIAL AND INDUSTRIAL by RAYNOR* 18
Rugged SteelForm doors are ideal for commercial and industrial applications.SteelForm door sections are a full 2" thick and made of hot-dipped galvanizedsteel for maximum rust resistance.
Designed for peak performance, the heavy-duty, 16-gauge steel skin and rugged hardware provide maximum reliability and durability for high security in the most demanding applications.
This benchmark product provides proven reliability and durability to meet or exceed the requirements of daily use. These 20 and 24-gauge garage doors are offered with the widest selection of quality features and options for the most common product applications.
© 2010 STEEL AND PIPES, INC.
A simple solution for typical applications providing Raynor quality and durability in a limited selection of sizes, features and options.
*THIS COLECTION IS AVAILABLE BY ORDER ONLY 344
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FABRICATIONS & MISCELLANEOUS DIVISION
FABRICATIONS & MISCELLANEOUS DIVISION © 2010 STEEL AND PIPES, INC.
STEEL JOISTS, GUIRDERS AND BOX TRUSSES
346
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FABRICATIONS & MISCELLANEOUS DIVISION
Bent Plates, Anchor Bolts, Grates, Pipe Supports, Antennas and more.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
347
© 2010 STEEL AND PIPES, INC.
CUSTOM FABRICATIONS
FABRICATIONS & MISCELLANEOUS DIVISION © 2010 STEEL AND PIPES, INC.
STAINLESS STEEL, GALVANIZED STEEL AND ALUMINIUM RAILINGS
348
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FABRICATIONS & MISCELLANEOUS DIVISION 349
© 2010 STEEL AND PIPES, INC.
STAIRS, STRINGERS AND LADDERS IN ANY SHAPE AND MATERIALS
FABRICATIONS & MISCELLANEOUS DIVISION
PRE-ENGINEERED METAL BUILDINGS Not only do we fabricate any Miscellaneous Metals, but we also sell and install Pre-Engineered Buildings...
© 2010 STEEL AND PIPES, INC.
www.rigidbuilding.com
Sales and Installation of Pre-engineered Metal buildings Exclusive distributor for Puerto Rico and the Caribbean
350
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FABRICATIONS & MISCELLANEOUS DIVISION 351
© 2010 STEEL AND PIPES, INC.
BOLTED TANKS
FABRICATIONS & MISCELLANEOUS DIVISION
CONCRETE WHEELS STOPS
2”
6’ LENGHT
5 1/2” 2” 7 1/2”
Fabrication and Material Specifications: • Three rods of 3/8” per unit • Standard 6'-0" length • Two holes for up to 1/2” rebar anchor (with SQ40 PVC sleeve) • 5 1/2" H 45 degree model in area of contact which protects those vehicles with spoilers installed • Tapered side design equalizes pressure down and forward from car wheels to relieve tension on setting pins and wheel stops • Geometric ramp-type structure eases the impact of the vehicle wheel • Graduated taper on ends relieves danger of cutting tires • Wheel Stops mark parking spaces long after painted lines have worn off • Use to protect buildings, shrubbery and lawns adjoining parking areas • Wheel Stops afford positive stopping for cars on sloped parking surfaces • Available in yellow and blue
ITEM NUMBER
DESCRIPTION
907.00Y.006 907.00B.006
WHEEL STOP IN YELLOW WHEEL STOP IN BLUE
© 2010 STEEL AND PIPES, INC.
PVC LOUVERS CUSTOM FABRICATION
352
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FABRICATIONS & MISCELLANEOUS DIVISION
Stock Items
PART NUMBER
DESCRIPTION
070.004.0606 070.004.0808 070.004.1010 070.006.0606 070.006.0808 070.006.1010 070.008.1010 070.008.1212 070.012.1212
Base Plate 1/4” x 6” x 6” with 4 holes of 5/8” Base Plate 1/4” x 8” x 8” with 4 holes of 5/8” Base Plate 1/4” x 10” x 10” with 4 holes of 7/8” Base Plate 3/4” x 6” x 6” with 4 holes of 3/4” Base Plate 3/4” x 8” x 8” with 4 holes of 3/4” Base Plate 3/8” x 10” x 10” with 4 holes of 3/4” Base Plate 1/2” x 10” x 10” with 4 holes of 3/4” Base Plate 1/2” x 12” x 12” with 4 holes of 7/8” Base Plate 3/4” x 12” x 12” with 4 holes of 7/8”
075.STEP.NOSING
Step Nosing “tola de piso” 1/8” x 48”
075.STEP.30 075.STEP.36 075.STEP.48
Z type treads 1/8” x 12” x 30” wide (1-1/2“ crease) Z type treads 1/8” x 12” x 36” wide (1-1/2“ crease) Z type treads 1/8” x 12” x 48” wide (1-1/2“ crease)
075.STEP.SPI.24 075.STEP.SPI.30 075.STEP.SPI.36
Spiral Step 1/8” x 24” wide Spiral Step 1/8” x 30” wide Spiral Step 1/8” x 36” wide
094.010.0000 094.012.0000 094.100.0000
Achor Bolt 3/4” x 18” with 4“ crease + 6” thread Achor Bolt 5/8” x 18” with 4“ crease + 6” thread Achor Bolt 1” x 18” with 4“ crease + 6” thread
9.PCM.2X3
Catch Basin Grate “parilla pluvial” with frame 2’ x 3’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
353
© 2010 STEEL AND PIPES, INC.
MISCELLANEOUS FABRICATIONS
NO
Pre- Engineered Metal Buildings
To Cyclone FENCE
The
a
E C N E F n tive i
S
al i r t s DUROFENCE II ndu
ltern A w e N
nd I a Fence Ever C PV ces Quality for a lifetime... Fen
Not only we fabricate any Miscellaneous Metals, but we also sell and install Pre- Engineered Buildings...
by
SALE AND INSTALLATION
Welding Products
We have all the safety equipment of the blacksmith!
Rent Welding Machines!
Only Representatives of Puerto Rico. Red-D-Arc Welderentals
• Performance and Reliability “Extreme Duty™”
We are the exclusive representatives of the best welding worldwide.
• Full range of rental welding machines. • Cost Effective. • Innovative Solutions.
Welding machines and plasma for sale. CAGUAS 787-747-9415
www.steelandpipes.com
BAYAMON HUMACAO GUAYAMA 787-778-5990
787-852-7638 787-864-0240
MANATI 787-854-6626
MAYAGUEZ HATO REY QUEBRADILLAS LAS PIEDRAS 787-834-0560
787-250-8872
787-291-5000
787-912-3000
MATERIAL HANDLING
DIVISION
MATERIAL HANDLING DIVISION
1 TON CHAIN HOIST 2.5 METER LIFT / 2 TON CHAIN HOIST 3 METER LIFT • Drop- Forge Hooks • Non- Slip Off Hooks • Heat-Treated Chain • Equipped with Hardened Load Chain for flexibility and long wear. • Heavy Duty Hoist with 1/4” chain designed for safe, easy, efficient operation. • Wheel cover with guide slots minimizes jamming. • Mechanical loads brake for positive control when lifting or pulling ITEM NUMBER
MODEL
TON [KG]
218.001.35050 218.001.35150
35050 35150
1 [1000] 2 [2000]
WEIGHT LBS. [KG]
17.6 26.4
OTHER MODELS AVAILABLE BY ORDER ONLY
1300 LB. ELECTRIC HOIST • Remote Control • Non- Slip Off Hooks • Single line capacity: 650 lbs. • Double line capacity: 650 lbs. • Single cable lenght: 48 ft. • Line speed:33 ft. per minute • 1-1/2 HP motor, 20v, 60Hz, 1150 watts, 8 amp • 5.4 ft. remote cord with power up/power down • UL listed • Weight: 41.2 lbs. ITEM NUMBER
MODEL
218.001.02954
02954
OTHER MODELS AVAILABLE BY ORDER ONLY © 2010 STEEL AND PIPES, INC.
1 Ton Chain Hoist
356
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
2 Ton Chain Hoist
MATERIAL HANDLING DIVISION
LOADMATE® ELECTRIC CHAIN HOISTS RELIABLE LONG-TERM PERFORMANCE
LoadMate® hoists are designed to maximize productivity with fast installation, easy operation and built-in durability. The compact design provides low headroom and allows close trolley approaches. R&M’s advanced design and manufacturing techniques ensure safe operation, consistent quality and longer component life. It adds up to exceptional value - hoist equipment that saves on maintenance, repair and downtime costs over its lifetime. R&M LOADMATE® ELECTRIC CHAIN HOISTS OFFER A RANGE OF CHOICES FOR A WIDE VARIETY OF APPLICATIONS. • Choice of 3 standard mounting configurations: fixed top hook, push trolley and motorized trolley (custom mounting confi gurations also available). • 10, 15 and 20 ft. lifts standard; additional lifting heights available up to 150 ft. single fall, 75 ft. two fall. • Lift speeds from 8 to 32 FPM single-speed, 12/3 to 64/16 FPM two speed, 1 - 16 to 4 - 64 FPM variable speed inverter, 0.16 to 5.7 HP hoist motors. • 115 volt single phase hoists - single speed only. • Three phase hoist motors are class F insulated, 50% effective duty rated. • Trolley control panel integrally mounted to the motor. • Premium-grade, AGMA rated * precision gearing contributes to the hoist’s compact, low-headroom design, low noise level and smooth operation. • Integral hoist control panel encloses all electrical components (hoist contactors, transformer, terminal strips, etc.) and is easily accessed for maintenance. • Easy trolley mounting attachment meets various application requirements. Slot in top of hoist body allows easy changeover of top hook, push trolley or motorized trolley mountings.
• Crown tread wheels standard on push and motorized trolleys, for use on standard I-beams and wide fl ange beams. • Plug-in push button pendant with E-stop for quick replacement is standard.
SPECIFICATIONS: NUMBER
CAP. LIFT* LIFT FRAME (SHORT) IN SPEED TONS FEET (FPM)
SS NO. ASME HOIST MOTOR OR OF DUTY H.P. TS FALLS CLASS
TOP HOOK (TH) OR ) LUG MOUNT (LM H.R. (IN.)
Single Speed, Single Phase Models 115 V - 1 Ph - 60 Hz 10 16 S 1 H3 0.64 218-LM05-1/2 LM05 1/2 LM05 1 10 8 S 2 H3 0.64 218-LM05-1 * Other lifts available ** Motorized Trolley Speed: 80/20 FPM; Trolley bumpers, drop lugs and motor brake are included
16 1/2 18 1/2
PUSH TROLLEY (PT)
WT. (LBS.)
H.R. (IN.)
60 67
15 5/8 18 7/8
WT. (LBS.)
74 89
MOTORIZED T (MT) H.R. (IN.)
N.A. N.A.
WT. (LBS.)
N.A. N.A.
OTHER MODELS AVAILABLE BY ORDER ONLY
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
357
© 2010 STEEL AND PIPES, INC.
ITEM
MATERIAL HANDLING DIVISION
EZ LIFT MANUAL CHAIN HOISTS RM SERIES II MANUAL CHAIN HOIST • 10 ft (3 m) standard lift. Hand chain is 2 ft (0.5 m) less than lift. Additional lifts available. • Overload limiting device to prevent lifting loads beyond rated capacity. (Except 1/4 ton [250 kg] unit). • High strength, grade 80 alloy steel load chain with galvanized finish for corrosion resistance. • Hooks are alloy steel, heat treated and equipped with hook latches and inspection points. • Dual pawl Weston-style brake with two brake friction discs provides four braking surfaces. • RM Series II Manual Chain Hoist meets or exceeds international standards, including ASME B30.16. SPECIFICATIONS: ITEM NUMBER
MODEL
CAPACITY TON [KG]
FALLS
218-RMII-250 218-RMII-500 218-RMII-1000 218-RMII-3000
RMII-250 RMII-500 RMII-1000 RMII-3000
1/4 [250] 1/2 [500] 1 [1000] 3 [3000]
1 1 1 1
CHAIN PULL 1 LBS. [N]
OVERHAUL 2 RATIO
53 [235] 54 [240] 57 [250] 84 [372]
17 33 53 106
Note: Reference Technical Guide for additional dimensional data
HEADROOM INCH [MM]
WEIGHT ** LBS. [KG]
11 [280] 13.6 [345] 14.8 [376] 21.6 [548]
14 [6.4] 25 [11.3] 29 [13] 78 [35]
** Note: Weights shown are for models with 10 ft. (3m) of lift
1 Effort required to lift rated load. 2 Ft [m] of hand chain movement required for 1ft [m] of lift.
OTHER MODELS AVAILABLE BY ORDER ONLY
EZ LIFT PUSH TROLLEYS RPT PUSH TROLLEY • Designed for both manual and electric top hook hoists. • Crown-tread wheels compatible with W and S beams. • Wheel ball bearings are sealed and maintenance-free. • Easily adjustable for a wide range of flange widths. • Safety drop lugs and rubber bumpers are standard. • Single flanged machined steel wheels add to the smooth motion. • Use a RPT for long traversing applications. • Spark resistant trolleys available.
RPT Push Trolley
SPECIFICATIONS:
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
MODEL
218-RPT-1000
RPT-1000
CAPACITY TON [KG]
1 [1000]
** Note: Weights shown are for models with 10 ft. (3m) of lift
358
BEAM FLANGE WIDTH INCH [MM]
2.56 - 7.88 [65 - 200] 7.88 - 12.2 [200 - 310]
MIN. RADIUS CURVE FT [M]
3.28 [1]
WEIGHT ** LBS. [KG]
23 [10.5] 27 [12]
OTHER MODELS AVAILABLE BY ORDER ONLY
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
METAL DECK & PURLINS DIVISION
METAL DECK & PURLINS DIVISION
METAL DECK TYPE “E” - GALVALUME™ The TYPE E panel is a best-selling for exposed metal roofing and siding applications because its soft lines are architecturally attractive, while the deep ribs provide strength and weatherproof construction. All panels are precision rollformed from hot dipped GALVALUME™ coated steel conforming to ASTM specifications A792-89, Grade 50B for structural quality sheet having a minimum yield strength of 50,000 p.s.i. GALVALUME™ sheet alloy coating is typically 55% aluminum, 1.6% silicon and the balance zinc. Applied to the substrate steel by a patented hot-dip process results in a highly corrosion resistant sheet steel. Each TYPE E panel provides a net coverage width of 36” in. and is fabricated to custom lengths up to 35’ ft. thus requiring fewer laps and allowing faster construction. 36” 12” 1 3/8”
LOAD CONDITION ONE SPAN TWO SPAN THREE SPAN
GAGE 26 24 26 24 26 24
SECTION PROPERTIES
© 2010 STEEL AND PIPES, INC.
Net Cover Width Weight Galv. Min. Yield Strength Desing Stress Moment of Inertia Positive Moment Capacity Negative Moment Capacity Allowable Shear
3’-0” 116 166 153 194 118 243
UNIT
in. 4
3’-6” 85 122 112 143 133 179
4’-0” 65 94 87 110 102 137
GAGE
26 24 36 36 1.03 1.29 50 50 30 30 0.073 0.090 130.6 187 173.2 220 2.6 4.0
SPAN IN FEET 4’-6” 5’-0” 5’-6” 6’-0” 52 39 29 22 74 60 47 36 68 55 46 38 87 70 58 49 81 65 54 42 108 88 73 61
6’-6” 18 29 33 42 33 52
7’-0” 14 23 28 36 26 43
7’-6” 11 19 25 31 21 35
8’-0” 9 15 22 27 18 29
1) Table shows allowed load governed by stress and deflection limit of 1/180. Figures in shade indicate live load which will produce a deflection not grater than 1/180. 2) For wind loads only values shown may be increased by 33.3%.
LENGHTS AVAILABLE IN STOCK: 10’, 12’, 14’, 16’, 18’, 20’, 22’, 24’, 25’ ALSO, WE CAN CUT IT TO YOUR NEEDED SIZE.
AVAILABLE IN THESE COLORS:
Country Red
Blue
White
Green
For accuracy of color matching, use actual product sample.
360
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
METAL DECK & PURLINS DIVISION
TYPE “B” - ROOF DECK Type “B” 1.5 is a wide rib steel deck that can be used as Composite Steel Floor Deck, Non-Composite Steel Form Deck or Steel Roof Deck.Type B1.5 Composite Steel Floor Deck acts at the positive bending reinforcement for structural concrete. After the concrete hardens, the steel deck and the concrete are interlocked by the shape of the deck, mechanical means, surface bond or by a combination of these means. Type “B” 1.5 Non-Composite Steel Form Deck is used as form for reinforced concrete slabs. Type “B” 1.5 Steel Roof Deck is used as the support of roofing materials and design live loads primarily for roof construction with rigid insulation board and built-up roofing. Type “B” 1.5 Deck is roll-formed from steel conforming to ASTM A653 Structural Quality, Grade 40, with a G-90 hot dipped galvanized coating. Finished panels provide a net coverage of 36 in. and are manufactured to custom length up to 35 feet.
36” 1 ½” 6”
DECK DESIGN FY GAUGE THICKNESS 22 20 18
in. 0.0295 0.0358 0.0474
SPAN CONDITION ONE SPAN TWO SPANS THREE SPANS
k.s.i 33 33 33
WEIGHT GALV. psf 1.60 2.04 2.07
in4 0.1400 0.1833 0.2600
Sn Sp POSITIVE NEGATIVE BENDING BENDING in3 0.1853 0.2287 0.3083
in3 0.1918 0.2390 0.3160
VA lbs. 1,658 1,993 2,592
1. Section Properties per one foot section calculated in accordance with the American Iron and Steel Institute's (AISI) Specification for the design of Cold-Formed Steel Structural Members, 2001 Edition US (ASD). 2. Ie is the minimum moment of Inertia. 3. Sp and Sn are the minimum reduced Section Modulus for positive bending and negative bending respectively, for use with the full allowable stress in accordance with AISI provisions. 4. Thickness shown is design thickness for bare metal.
UNIFORM TOTAL (DEAD & LIVE) LOAD in pounds per squa
GAUGE 22Ga 20Ga 18Ga 22Ga 20Ga 18Ga 22Ga 20Ga 18Ga
Ie MIN.
4’-0” 153 188 254 153 190 252 190 236 312
4’-6” 111 142 197 121 151 200 151 188 248
5’-0” 83 106 146 99 123 163 123 154 203
5’-6” 65 92 112 82 102 135 102 127 168
6’-0” 52 66 89 69 86 114 86 107 142
6’-6” 43 54 72 59 73 97 73 92 121
7’-0” 37 45 60 51 63 84 60 76 104
7’-6”
8’-0”
38 50 44 55 73 51 64 86
33 43 39 49 64 44 54 73
re foot
8’-6”
9’-0”
38
33
43 57 38 47 62
38 51 34 41 54
9’-6” 10’-0”
46
41
36 48
42
1. Loads shown in tables are uniformly distributed total (dead plus live) loads in psf. All loads are governed by the allowable flexural stress limit of 20 ksi (0.6 of minimum yield strength of steel). Figures in shaded areas are governed by live load deflection not in excess of L/240 when a dead load of 10 psf is assumed. 2. Multiple span loads shown are based on equal adjacent spans. Tabulated loads may not apply for adjacent spans that differ in length by more than 10%. 3. Load tables are calculated using Section Properties based on the specified design thickness listed by the Steel Deck Institute "Design 3.Manual". Delivered minimum thickness shall be not less than 95% of the design thickness. 4. When heavy construction loads or other unusual concentrated loads are contemplated, the required live loads must be increased to account for the anticipated concentrated loading. . 5. Span length assumes center to center spacing of supports. Tabulated loads may not be increased by assuming clear span dimensions. 6. Bending Moment formulae used for flexural stress limitations: Simple and Two Spans: M = wL2 / 8. Three of More: M = wL2 / 10 7. Deflection formulae used for deflection determination: Simple Span D = 0.013 wL4 / EI Two Spans D = 0.0054 wL4 / EI Three Span D= 0.0069 w L4 / EI
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
361
© 2010 STEEL AND PIPES, INC.
SECTION PROPERTIES - 12" SECTION
METAL DECK & PURLINS DIVISION
TYPE “S” - STEEL FORM STEEL FORMSteel form is a high strength, light-weight permanent form for poured concrete or light-weight aggregate, used in the construction of floor slabs and roof decks.Sheets are roll formed from hot dipped galvanized steel, G-90 Coating, conforming to ASTM Specification A653, Grade 80, for structural quality sheet having a minimum yield strength of 80,000 p.s.i. Each sheet provides a net coverage width of 30” and is fabricated to custom lengths up to 35 ft. 30" 2 1/2" 0.594
PHYSICAL PROPERTIES GAUGEG.S.G.28 in. in. P.S.F. K.S.I. K.S.I in.4 in. 3 ft.-lbs kips
Overall Width Net Cover Width Weight-Galv. Min. Yield Strength Desigh Stress Moment of Inertia Section Modulus Moment Capacity Allowed Shear
When used for roof construction in conjunction with light-weight insulating concrete fill, the sheets form a structural deck which supports the total weight of slab and roofing materials plus the desired live loads. Actual deflections are much less than those tabulated below because of the composite action between the insulating concrete and steel deck. When the deck is used only as a form for structural concrete slabs, the total loads on the sheets consists of the weight of the wet concrete plus some arbitrary live load for construction traffic. In this case, the tabulated deflections are actual deflections.
32 30 0.89 80 30 0.0095 0.0303 75.7 2.24
NOTE: Properties shown are for 12 in. cover width. ALLOWABLE UNIFORM TOTAL LOADS (lbs./ft.2) & DEFLECTION (in) SPAN IN FEET
LOAD CONDITION TWO SPANS
LOAD
269
151
97
67
49
38
30
24
THREE OR MORE SPANS
LOAD
336
189
121
84
62
47
37
30
© 2010 STEEL AND PIPES, INC.
VOLUME OF FILL OVER STEELFORM To determine total volume of fill in cu. Ft., multiply area in square feet by correspondingfigure from table DEPTH OVER TOP OF RIB
Fill in cu. Ft.
362
2 1/2"
3"
3 1/2"
4"
4 1/2"
0.232
0.273
0.315
0.357
0.398
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
BEAM PROPERTIES
Y
“C” purlins are roll formed from high strength hot dipped galvanized steel, conforming to ASTM Designation A653, Grade D, for Structural Quality Steel with a minimum yield strength of 50,000 psi, and G-90 galvanized coating.Sectional properties shown below were computed in strict accordance with the provision of The American Iron & Steel Institute's “Specifications for the Design of Cold-Formed Steel Structural Members", 1996 EDITION.
SECTION
Ga
H in
W in
DIMENSIONS L t in in
AREA
in 2
4 x 2.5 6 x 2.5
W L
X
WT Lbs/ft
H
Ixx in 4
PROPERTIES FOR BEAM Fb Rxx ksi in ksi in 3
R.M. Lbs-ft
V kips
28.85 44.38
5.77 3.889 7.40 4.578
13151 16930
10.30 9.70
METAL DECK & PURLINS DIVISION
“C” PURLINS
2.47
6 x 3.5 8 x 2.5 8 x 3.5
12 x 3.5
12 12
10 12
3.5 3.5
1.00 1.00
0.105 0.105
1.91 2.12
NOTES: BEAM STRENGTH: Properties shown for beam strength have been reduced, where required, to allow the use of the full allowable design stress in accordance with Section 2.3 of the Specifications. The allowable design stress Fb, is based on the basic design stress for flexural members and the allowable bending stress in webs determined in accordance with the provisions of Section 3 of the Specifications.
6.80 7.50
50 50
30 30
Ixx is the moment of inertia for deflection determination. Sxx is the section modulus reduced for load determination. DIMENSIONS: Thickness and area shown are those of bare steel exclusive of the galvanized coating.Weights listed for purlins are based on the weight of galvanized steel.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
363
© 2010 STEEL AND PIPES, INC.
10 x 3.5
METAL DECK & PURLINS DIVISION
“Z” PURLINS
Y W
L
R 0.3” (typ.)
X
H
BEAM PROPERTIES 50° (typ.)
“Z” purlins are roll formed from high strength hot dipped galvanized steel, conforming to ASTM Designation A653, Grade D, for Structural Quality Steel with a minimum yield strength of 50,000 psi, and G-90 galvanized coating. Sectional properties shown below were computed in strict accordance with the provision of The American Iron & Steel Institute's "Specifications for the Design of Cold-Formed Steel Structural Members", 1996 EDITION.
SECTION
Ga
H in
W in
DIMENSIONS AREA L t in in in 2
WT Lbs/ft
Ixx in 4
PROPERTIES FOR BEAM Sxx Rxx Fy R.M. 3 in ksi Lbs-ft in
V kips
8 x 2.5 10 x 3.5
© 2010 STEEL AND PIPES, INC.
NOTES: BEAM STRENGTH: Properties shown for beam strength have been reduced, where required, to allow the use of the full allowable design stress in accordance with Section 2.3 of the Specifications. The allowable design stress Fb, is based on the basic design stress for flexural members and the allowable bending stress in webs determined in accordance with the provisions of Section 3 of the Specifications.
364
Ixx is the moment of inertia for deflection determination. Sxx is the section modulus reduced for load determination. DIMENSIONS: Thickness and area shown are those of bare steel exclusive of the galvanized coating.Weights listed for purlins are based on the weight of galvanized steel.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
METAL DECK & PURLINS DIVISION
ACCESSORIES ITEM NUMBER
DESCRIPTION
050.304.90 050.090.0203
ELBOWS 3” X 4” ELBOWS 2” X 3”
ITEM NUMBER
DESCRIPTION
050.304.10
OUTLET RECTANGULAR 3” X 4”
ITEM NUMBER
DESCRIPTION
050.203.COPA
OUTLET RECTANGULAR 2” X 3”
ITEM NUMBER
DESCRIPTION
050.203.0100 050.304.12 050.304.16 050.304.20
DOWNSPOUT .0175 - 2” X 3” X 10’ DOWNSPOUT .019 - 3” X 4” X 12’ DOWNSPOUT .019 - 3” X 4” X 16’ DOWNSPOUT .019 - 3” X 4” X 20’
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
365
© 2010 STEEL AND PIPES, INC.
PRE-ENGINEERED BUILDINGS SYSTEM
METAL DECK & PURLINS DIVISION
STANDING SEAM ROOF SYSTEM PLATINUM SERIES
™
innovation. new technology. better products.
16”/18”
Utilizing a unique patented seam design that offers two lock seam features. The Triple-Lok and Quad-Lok. A revolutionary innovation that provides unparalleled performance from one profile. The Triple-Lok seam is accomplished by seaming the entire seam with an electrical seamer. This seam will provide an allowable wind uplift loading of 56 psf.* 1. It’s the only seam on the market to use the 360º + 90º seam, which: • Structurally isolates the seam from the effects of severe wind loading by placing load resisting bends between the seam and clip hook and the stresses of panel deflection. • Isolates the seam sealant from dislodgment or separation during severe wind loading, thereby assuring a water resistant seam throughout the life of the roof.
Rigid’s Platinum Series is a revolutionary patented standing seam roof system that incorporates two unique seams. The Triple-Lok seam for normal wind speeds and the Quad-Lok for coastal areas and other high wind speed zones. The Platinum Series incorporates a double seam, double hook side lap design to resist seam failure between supports and side lap unfurling and unzipping. It is a roof system with tremendous strength designed to with stand the most strenuous uplift testing and highest velocity wind speeds. Combine that with its aesthetic appeal which is a favorite of architects and building owners alike, and you have an unsurpassed panel in look and quality. Available in all of Rigid’s Spectralite 3000 Fluoropon 70%, Kynar 500/Hylar 5000 colors.The Platinum Series offers you a wide range of colors to enhance the the beauty of your project and give you unsurpassed coating performance for continued beauty year after year.
© 2010 STEEL AND PIPES, INC.
2. Fool-proof installation: all that is required is the placement of the electrical seaming machine on the seam to begin the seaming process. It’s virtually impossible for the seamer to run off the seam until it comes to the end of the panel or is removed by the operator. The Quad-Lok seam is accomplished by seaming special roof zones with an electrical seam, when required. This seam will provide an allowable uplift load of 64 psf*, (or 120 psf over 2’6” purlin spacing). By using the Quad-Lok seam, the perimeter conditions of roofs in high wind coastal locations can resist wind loads without exterior clamps and brackets that most other roof systems require to meet the Zone III uplift loads. The Quad-Lok seam is the only seam on the market that provides higher uplift resistance with 24 gauge panel than all other roof systems using 22 gauge panels. * when seamed with a 24 gauge panel over 5’0” purlin spacing All of the above seams and load tolerances are calculated in accordance with AISI using ASTM E 1592 tests.
366
TRIPLE-LOK QUAD-LOK
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE. Exclusive distributor for Puerto Rico and the Caribbean
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
FACTORY MUTUAL 4471TRIPLE-LOK TEST RESULTS Rigid Building Systems roof with Triple-Lok or Quad-Lok seam FM Rating Panel Width Panel Gauge Purlin Size Purlin GaugePurlin Spacing I-90 16” 24 ga. 8” 16 ga. 5’0” I-90 18” 24 ga. 8” 16 ga. 5’0” 1-165 16” 22 ga. 8” 16 ga. 2’6” I-165 18” 22 ga. 8” 16 ga. 2’6”
The roof system utilizing the TS-324 panel system’ s technology has been tested and certified by independent testing agencies and laboratories and has achieved the loads and listings shown below.
UL CONSTRUCTION NO. 506 Rigid Building Systems roof with Triple-Lok over Purlins UL Listing Panel Width Panel Gauge Seam Type Purlin UL-90 12” 24 ga. Triple-Lok UL-90 16” 24 ga. Triple-Lok UL-90 18” 24 ga. Triple-Lok
GaugePurlin Spacing 16 ga. 5’0” 16 ga. 5’0” 16 ga. 5’0”
METAL DECK & PURLINS DIVISION
Underwriters Laboratories Inc. Construction No. 506, 506A, 506B Rigid Building Systems roof with Triple-Lok and Quad-Lok seam
UL CONSTRUCTION NO. 506A Rigid Building Systems roof with Triple-Lok over Steel Deck UL Listing Panel Width Panel Gauge Seam Type Purlin GaugePurlin Spacing UL-90 12” 24 ga. Triple-Lok 16 ga. 5’0” UL-90 16” 24 ga. Triple-Lok 16 ga. 5’0” UL-90 18” 24 ga. Triple-Lok 16 ga. 5’0”
photos: copyright Rigidbuilding System, Ltd.
UL CONSTRUCTION NO. 506B Rigid Building Systems roof with Triple-Lok over Wood Deck UL Listing Panel Width Panel Gauge Seam Type Purlin GaugePurlin Spacing UL-90 12” 24 ga. Triple-Lok 16 ga. 5’0” UL-90 16” 24 ga. Triple-Lok 16 ga. 5’0” UL-90
18”
24 ga.
Triple-Lok
16 ga.
5’0”
ASTM E 1592 UPLIFT TEST RESULTS Rigid Building Systems roof with Quad-Lok seam Purlin Spacing Panel Width Panel Gauge Design Load AISI CF00-1 (sf=1.724) 2’6”
18”
22 ga.
5’0”
18”
22 ga.
2’6” 5’0” 2’6” 5’0” 2’6” 5’0”
18” 18” 16” 16” 16” 16”
24 24 22 22 24 24
ga. ga. ga. ga. ga. ga.
110.3 63.0 94.5 56.7 116.6 78.8 97.7 63.0
photos: copyright Rigidbuilding System, Ltd.
ASTM E 1592 UPLIFT TEST RESULTS
2’6” 2’6” 5’0”
18” 18” 16”
24 ga. 24 ga. 22 ga.
82.7 44.9 104.0
2’6”
16”
22 ga.
66.2
2’6” 5’0”
16” 16”
24 ga. 24 ga.
79.4 48.1
ASTM E 1680 Air Infiltration all seams 18” wide panels = 0.014 CFM/sq. ft. ASTM E 1645 Water Leakage seams 12”, 16” & 18” wide panels = None at 12 psf
photos: copyright Rigidbuilding System, Ltd.
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
367
© 2010 STEEL AND PIPES, INC.
Rigid Building Systems roof with Triple-Lok seam Purlin Spacing Panel Width Panel Gauge Design Load AISI CF00-1 (sf=1.724) 2’6” 18” 22 ga. 94.5 5’0” 18” 22 ga. 63.0
METAL DECK & PURLINS DIVISION
STANDING SEAM ROOF SYSTEM HIGH-TECH SERIES
™
innovation. new technology. better products.
Believe it or not, when you look at most metal roofs on the market today, you’re looking at systems that rely on technology that’s over 30 years old. It’s a fact that the design of existing standing seam roofs has not been fundamentally upgraded since 1969 – when assumptions about wind resistance and expected roof performance were severely under calculated compared to what we know today. Rigid has used the latest technology available to develop a metal roof system that’s designed for tomorrow; with components and techniques that out perform others by specifically addressing current and anticipated building codes and roofing requirements. Our proven, patented seam utilizing the TS-364 panel system’s technology provides superior wind and weather protection under all loading conditions, the seam geometry and seaming methods to virtually assure that your installed roof will perform as it was designed at a minimal cost.
TRIPLE-LOK
EZ-LOK
© 2010 STEEL AND PIPES, INC.
QUAD-LOK
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE. Exclusive distributor for Puerto Rico and the Caribbean
368
photos: copyright Rigidbuilding System, Ltd.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
The Triple-Lok seam is accomplished by seaming the entire seam with an electrical seamer. This seam will provide an allowable wind uplift loading of 56 psf.* 1. It’s the only seam on the market to use the 360º + 90º seam, which: • Structurally isolates the seam from the effects of severe wind loading by placing load resisting bends between the seam and clip hook and the stresses of panel deflection. • Isolates the seam sealant from dislodgment or separation during severe wind loading, thereby assuring a water resistant seam throughout the life of the roof. 2. Fool-proof installation: all that is required is the placement of the electrical seaming machine on the seam to begin the seaming process. It’s virtually impossible for the seamer to run off the seam until it comes to the end of the panel or is removed by the operator. The Quad-Lok seam is accomplished by seaming special roof zones with an electrical seam, when required. This seam will provide an allowable uplift load of 64 psf*, (or 120 psf over 2’6” purlin spacing). By using the Quad-Lok seam, the perimeter conditions of roofs in high wind coastal locations can resist wind loads without exterior clamps and brackets that most other roof systems require to meet the Zone III uplift loads. The Quad-Lok seam is the only seam on the market that provides higher uplift resistance with 24 gauge panel than all other roof systems using 22 gauge panels.
Underwriters Laboratories UL-90 Classification Construction No. 556 Factory Mutual Class 1-90 Listing Corps of Engineers CEGS 07416 Uplift Test ASTM E 1592 Uplift Test (three tests each span each gauge) ASTM E 1680 Air Infiltration ASTM E 1645 Water Leakage The roof system utilizing the TS-324 panel system’s technology has been tested and certified by independent testing agencies and laboratories and has achieved the loads and listings shown below.
METAL DECK & PURLINS DIVISION
The EZ-Lok seam is accomplished by easily and quickly hand seaming the seam at each clip.This will provide and allowable wind uplift loading of 32 psf.* 1. Provides superior water resistance than conventional “double lock” seams by isolating seam sealant from dislodgment or separation during severe wind loading. 2. Fool-proof installation: all that is required is one simple rotation of the hand seamer at each clip to lock the panel to the roof structurals. 3. It can be installed faster than snap-together seams.
The following recognized certifications and listings have been earned:
Underwriters Laboratories Inc. Construction No. 556, 556A, 556B Rigid Building Systems roof with EZ-Lok,Triple-Lok and Quad-Lok seam UL Listing Panel Width UL-60 UL-90
24” 24”
Panel Gauge Seam Type 24 ga. 24 ga.
All seam All seam
Purlin Gauge types types
Purlin Spacing
16 ga. 16 ga.
5’0” 5’0”
Factory Mutual 4477 Uplift Test Results Rigid Building Systems roof with Triple-Lok or Quad-Lok seam FM Listing Panel Width 1-60 1-90
24” 24”
Panel Gaug e Purlin depth Purlin Gauge Purlin Spacing 24 ga. 24 ga.
8” 8”
16 ga. 16 ga.
5’0” 4’0”
ASTM E 1592 Uplift Test Results Rigid Building Systems roof with EZ-Lok seam Purlin Spacing Panel Width 2’6” 5’0”
24” 24”
Panel Gauge
Design Load AISI CF00-1 (sf=1.724)
24 ga. 24 ga.
42.2 24.1
ASTM E 1592 Uplift Test Results Rigid Building Systems roof with Triple-Lok seam Purlin Spacing Panel Width 1-60 1-90
24” 24”
Panel Gauge
Design Load AISI CF00-1 (sf=1.724)
24 ga. 24 ga.
62.3 42.2
ASTM E 1592 Uplift Test Results Rigid Building Systems roof with Quad-Lok seam Purlin Spacing Panel Width 2’6” 5’0”
24” 24”
Panel Gauge
Design Load AISI CF00-1 (sf=1.724)
24 ga. 24 ga.
90.3 48.2
ASTM E 1680 Air Infiltration all seams 24” wide panels = .0005 CFM/sq. ft. ASTM E 1645 Water Leakage all seams 24” wide panels = None at 12 psf
* when seamed with a 24 gauge panel over 5’0” purlin spacingAll of the above seams and load tolerances are calculated in accordance with AISI using ASTM E 1592 tests.
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
369
© 2010 STEEL AND PIPES, INC.
Utilizing a unique patented seam design that offers three lock seam features.The EZ-Lok,Triple-Lok and Quad-Lok. A revolutionary innovation that provides unparalleled performance from one profile.
METAL DECK & PURLINS DIVISION
HIGH RIB ROOF & WALL PANEL RHR-9000 SERIES
™
innovation. new technology. better products.
FOR A ONE PIECE ROOF PANEL SYSTEM OR AN EXTERNAL WALL SYSTEM This versatile insulated panel is equally impressive for exterior roof or wall applications, offering the most efficient insulation values available. The RHR-9000 panel is designed for use on industrial, commercial and institutional buildings for new and re-roof applications as well as wall applications.The RHR-9000 panel is the product of choice when speed of erection, light weight and thermal efficiency are required.
High-rib design provides maximum strength characteristics.
Steel skins chemically bonded to the polyurethane foam core prevents internal condensation and helps retain insulation values.
ADDITIONAL DESIGN FEATURES: • Manufactured on continuous flow, fully automated line producing superior panels of uniform quality. • The joint design is simple and effective, making the panel easy to install and thus reducing construction time and cost .
PRODUCT DESCRIPTION This versatile insulated panel is equally impressive for roof or' wall applications, offering the most efficient insulation values available. The RHR-9000 panel is designed for use on industrial, commercial and institutional buildings for new and re-roof applications, as well as wall applications. The RHR-9000 panel is the product of choice when speed of erection, light weight and thermal efficiency are required. SPECIFICATIONS: Panel Thickness: I, 1.5",2", 2.5", 3",4" and 5" R-value by ASTM C-236: 10.2, 14.2, 18.2, 22.2, 26.2, 34.2, 42.2 Panel Width: 40" Panel Length: 48' 0" standard maximum Insulation Material: Foamed in-place urethane with nominal density of 2.4 Ibs./cu. ft. Joint Configuration: Overlapping rib Accessories: Flashings, sealants and fasteners are available.
© 2010 STEEL AND PIPES, INC.
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE. Exclusive distributor for Puerto Rico and the Caribbean
370
Panel Exterior: Standard is 26 ga stucco embossed G-90 galvanized steel with PPG Duranar® PYDF finish for commercial/industrial applications, and PPG Durafin 2000'" High Performance Coating for cold storage applications. Both finishes offer excellent value with a 20-year warranted performance.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Customer Options: Other gauges in steel or other materials; a choice of 8 standard PYDF colors and custom color coatings to match customer color samples. * subject to terms and conditions of coating warranty agreement MATERIAL TESTING This product has been extensively tested for compliance with various industry standards and building safety codes.
photos: copyright Rigidbuilding System, Ltd.
METAL DECK & PURLINS DIVISION
Panel Interior: Standard is 26ga stucco embossed G-90 galvanized steel with PPG Durafin 2000'" High Performance Coating, USDA accepted, warranted for 20 years in areas requiring heavy wash down'.
Fire Performance - RHR Series panels have passed the Factory Mutual full scale corner test (inciuding ASTM E-84 and D-1929) and are approved for unlimited weights. Thermal Transmission - Panels have been tested for insulating values in accordance with ASTM C-236/C-1363 methods. Air Inffltration - Panel joints have been tested for water penetration in accordance with ASTM E-283. Water Inffltration - Panel joints have been tested for water penetration in accordance with ASTM E-331. Structural - Panels have been tested per ASTM E-72 methods. Roof panels have been tested per FM 1-90 and UL uplift criteria.
photos: copyright Rigidbuilding System, Ltd.
*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.
photos: copyright Rigidbuilding System, Ltd.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
371
© 2010 STEEL AND PIPES, INC.
WARRANTY All products are warranted to be free from defects in material and workmanship for a period of one year from the date of shipment in accordance with the terms and conditions in our "Limited Warranty". The coverage period of the "Limited Warranty" may be extended by Rigid Building Systems at time of issue.
HOY
O R E R R E H L CLUB DE tros productos:
s e u n s o d o t n e o t n e 5 %* de descu IN CHAMBERLA
®
________
_______ _ _ _ _ _ _ _ _ _ _ _ _ ______
__________
_ Nombre_______
___
________ _ _ _ _ _ _ _ # io c o S
_________
______ _ _ _ _ _ _ _ ._ p x E __Fecha
cans no aplican a merizada. to en cu es D o. nt ue aplicar el desc ningún grosor sea negra o galvan recompra para poder ría co la 2 de cancía de to en om m n, tube 1x1 y 1x tos aplican a meron tada al ió en en cc , cu es tru pr es r ns D . se co H be de AT de o la , varil , MC stricci es aplican s” sa re Vi lin *La tarjeta s ur o, rta “p tiv ie ”, C ec ef ck o. is de en av r al et nta tiene que se elar estos descuentos sin previo cía en especial, “m o sea válido la ve nt ue sc de canc de el e qu Para amos el derechorje rv se re os N . al rs jida en la sucu ndiciones al dorso de esta ta ta. ver términos y co
Ahora en productos: CHAMBERLAIN
®
INDUSTRIAL & RESIDENTIAL FENCES
DIVISION
PVC
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
ARLINGTON CLAREDON
05 52 00/HAL
DARTMOUTH EXETER
ARLINGTON SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options:
6' center-to-center
(Notice- Posts must be exactly centered to allow for expansion.) Post Dimensions:
48" High Fence = 4" x 4" x 72" 60" High Fence = 4" x 4" x 96" 72" High Fence = 4" x 4" x 108"
CLAREDON
Standard Post Depth: (Local Conditions may require additional depth.) 48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth Standard Cap Style:
4" x 4" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Radius corner sections also available.
DARTMOUTH
Picket (Verticals) • Arlington, Claredon & Exeter Spacing Between Pickets:
5”
• Dartmouth Spacing Between Pickets:
2”
• Picket Dimensions on Arlington, Claredon & Exeter:
3/4 x 3/4”
• Pickets Dimension © 2010 STEEL AND PIPES, INC.
on Dartmouth: Ground Clearance:
EXETER 374
3/4” x 3/4” and 1” x 4” 2"
(Grade variations will cause inconsistent ground clearance measurements.)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
BRIGHTON
05 52 00/HAL
ALTON
CLAYTON
DALTON
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options:
6' center-to-center
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
ALTON
(Notice- Posts must be exactly centered to allow for expansion.)
BRIGHTON
Post Dimensions:
48" High Fence = 4" x 4" x 72" 60" High Fence = 4" x 4" x 96" 72" High Fence = 4" x 4" x 108"
Standard Post Depth: (Local Conditions may require additional depth.) 48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
CLAYTON
Standard Cap Style:
4" x 4" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Radius corner sections also available. Picket (Verticals) • Alton Spacing Between Pickets:
5”
• Brighton, Clayton Spacing
DALTON
2”
• Dalton Spacing Between Pickets:
2 1/8“
Pickets Dimension:
1” x 1”
Ground Clearance:
2"
(Grade variations will cause inconsistent ground clearance measurements.)
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
375
© 2010 STEEL AND PIPES, INC.
Between Pickets:
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
MONTAUK POINT STRAIGHT 05 52 00/HAL
MONTAUK
MONTAUK STEP
MONTAUK MONTAUK SCALLOP SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options:
6' center-to-center
(Notice- Posts must be exactly centered to allow for expansion.)
MONTAUK STEP
Post Dimensions:
48" High Fence = 5" x 5" x 84" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth: (Local Conditions may require additional depth.) 48" High Fence = 36" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
MONTAUK POINT
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
2" Thick x 8" Wide (Bottom) 2" Thick x 6" Wide (Middle) 2" Thick x 3 1/2" Wide (Top-Montauk only) 1 3/4" Thick x 3 1/2" Wide (Top-Montauk Point Straight, Scallop, and Step)
© 2010 STEEL AND PIPES, INC.
Pickets Dimension (Verticals):
7/8" Thick x 7" Wide (Bottom) 1 1/2" Thick x 1 1/2" Wide (Top)
Ground Clearance:
MONTAUK SCALLOP 376
2"
(Grade variations will cause inconsistent ground clearance measurements.)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
LAKELAND HEAVY-DUTY
HOLLINGSWORTH
LAKELAND
LAKELAND CONVEX
LAKELAND CONCAVE SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options:
8' center-to-center
(Notice- Posts must be exactly centered to allow for expansion.) Post Dimensions:
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
LAKELAND
48" High Fence = 5" x 5" x 84" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
LAKELAND CONCAVE
Standard Post Depth:
48" High Fence = 36" Depth 60" High Fence = 36" Depth 72" High Fence = 36" Depth
Standard Post Cap:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
1" Thick x 6" Wide (Top/Each SideConvex & Concave) 2" Thick x 6" Wide (Top/Mid) 2" Thick x 8" Wide (Bottom)
LAKELAND CONVEX
Pickets Dimension (Verticals):
7/8” Thick x 7” Wide
Ground Clearance:
2"
(Grade variations will cause inconsistent ground clearance measurements.)
Standard Height Options:
72”
Post Dimensions:
72" High Fence = 5" x 5" x 108"
(Heavy Wall)
HOLLINGSWORTH
Standard Post Depth:
72" High Fence = 36" Depth
Horizontal Dimensions:
2" Thick x 6" Wide (Top, Middle
and Bottom)
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
377
© 2010 STEEL AND PIPES, INC.
LAKELAND HEAVY-DUTY
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 05 52 00/HAL 4’ or 6' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
DENVER
DENVER
HANVER
Post Dimensions:
48" High Fence = 4" x 4" x 84" 60" High Fence = 4" x 4" x 96" 72" High Fence = 4" x 4" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
4" x 4" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Denver Picket (Verticals) 4’ Post Spacing 6’ Post Spacing Dimensions: Hanver Picket (Verticals) 4’ Post Spacing 6’ Post Spacing Dimensions:
17/64“ Between Pickets 13/16“ Between Pickets 1” Thick x 6” Wide 7/8“ Between Pickets 1 5/64“ Between Pickets 1” Thick x 6” Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
SPECIFICATIONS: Standard Height Options:
36", 42", or 48”
Post Spacing Options: 4’ or 6' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
GEORGETOWN
© 2010 STEEL AND PIPES, INC.
GEORGETOWN
Post Dimensions:
36" High Fence = 3 1/2" x 3 1/2" x 60" 42" High Fence = 3 1/2" x 3 1/2" x 66" 48" High Fence = 3 1/2" x 3 1/2" x 72"
(Local Conditions may require additional depth.)
Standard Post Depth:
36" High Fence = 24" Post Depth 42" High Fence = 24" Post Depth 48" High Fence = 24" Post Depth
Standard Cap Style:
3 1/2" x 3 1/2" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Pickets (Verticals) Georgetownt Spacing Nantucket Spacing Pickets Dimensions: Georgetownt: Nantucket:
NANTUCKET
378
1 9/16“ Between Pickets 1 3/4“ Between Pickets 3/4” Thick x 1 1/2” Wide 7/8” Thick x 3” Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 05 52 52 00/HAL 00/HAL6' center-to-center 05 (Notice- Posts must be exactly centered to allow for expansion.)
CARIBBEAN CARIBBEAN
Post Dimensions:
48" High Fence = 4" x 4" x 72" 60" High Fence = 4" x 4" x 96" 72" High Fence = 4" x 4" x 108"
Standard Post Depth: (Local Conditions may require additional depth.)
48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
4" x 4" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Picket (Verticals) 6’ Post Spacing 8’ Post Spacing Dimensions:
3/4“ Between Pickets 1“ Between Pickets 1” Thick x 6” Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 8' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
DAWSON DAWSON
Post Dimensions:
48" High Fence = 24" Depth 60" High Fence = 36" Depth 72" High Fence = 36" Depth
Standard Post Cap:
5" x 5” New England with Post Ender
Horizontal Dimensions:
2" Thick x 3.5" Wide (Top) 2" Thick x 3.5" Wide (Middle) 2" Thick x 6" Wide (Bottom)
Radius corner sections also available. Pickets Dimensions (Verticals):
1 1/2” Thick x 1 1/2” Wide
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
379
© 2010 STEEL AND PIPES, INC.
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
05 52 00/HAL 6’ or 8' center-to-center Post Spacing Options: (Notice- Posts must be exactly centered to allow for expansion.)
KENSINGTON
Post Dimensions:
48" High Fence = 4" x 4" x 72" 60" High Fence = 4" x 4" x 96" 72" High Fence = 4" x 4" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
4" x 4" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Pickets (Verticals) 6’ Post Spacing 8’ Post Spacing Dimensions:
1 1/4“ Between Pickets 1 1/2“ Between Pickets 1” Thick x 6” Wide and 1” Thick x 2” Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
KENSINGTON
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 8' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
LINCOLNSHIRE LINCOLNSHIRE
Post Dimensions:
48" High Fence = 5" x 5" x 72" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth:
48" High Fence = 22" Post Depth 60" High Fence = 34" Post Depth 72" High Fence = 34" Post Depth
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
3 1/2" Wide x 3 1/2" Thick (Top & Bottom) 1 3/4" Wide x 3 1/2" Thick (Middle)
Radius corner sections also available.
© 2010 STEEL AND PIPES, INC.
Pickets (Verticals): Pickets Dimensions:
3“ Between Pickets 1 1/2” Wide x 1 1/2” Thick
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
380
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 05 52 52 00/HAL 00/HAL8' center-to-center 05 (Notice- Posts must be exactly centered to allow for expansion.)
MELBOURNE
Post Dimensions:
48" High Fence = 5" x 5" x 72" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 22" Post Depth 60" High Fence = 34" Post Depth 72" High Fence = 34" Post Depth
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
3 1/2" Thick x 3 1/2" Wide
Pickets (Verticals): Pickets Dimensions:
5 3/8“ Between Pickets 1" Thick x 6" Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
MELBOURNE
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 8' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
ROCHESTER
Post Dimensions:
48" High Fence = 4“ x 4” x 84“ 60" High Fence = 4“ x 4” x 96“ 72" High Fence = 4“ x 4” x 108“
(Local Conditions may require additional depth.)
Standard Post Depth:
48" High Fence = 24“ Post Depth 60" High Fence = 36“ Post Depth 72" High Fence = 36“ Post Depth
Standard Post Cap:
4" x 4” Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide (Top, Middle and Bottom Rails)
Pickets Dimensions (Verticals):
7/8” Thick x 3” Wide
ROCHESTER
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
381
© 2010 STEEL AND PIPES, INC.
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
SPECIFICATIONS: Standard Height Options:
36", 42", or 48”
05 52 00/HAL 4’ or 6' center-to-center Post Spacing Options: (Notice- Posts must be exactly centered to allow for expansion.)
MALIBU
Post Dimensions:
36" High Fence = 3 1/2" x 3 1/2" x 60" 42" High Fence = 3 1/2" x 3 1/2" x 66" 48" High Fence = 3 1/2" x 3 1/2" x 72"
Standard Post Depth:
(Local Conditions may require additional depth.)
36" High Fence = 24" Post Depth 42" High Fence = 24" Post Depth 48" High Fence = 24" Post Depth
Standard Cap Style:
3 1/2" x 3 1/2" Traditional (External Flange)
Horizontal Dimensions:
1 3/4" Thick x 3 1/2" Wide
Pickets (Verticals) 4’ Post Spacing 6’ Post Spacing Dimensions:
1 15/16“ Between Pickets 1 15/16“ Between Pickets 1” Thick x 2” Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
MALIBU
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 4' x 6’ center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
MARSEILLE
Post Dimensions:
48" High Fence = 5" x 5" x 84" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 36" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
3 1/2" Wide x 1 3/4" Thick
Pickets Dimensions (Verticals):
1" Wide x 6" Thick
© 2010 STEEL AND PIPES, INC.
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
MARSEILLE
382
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 05 52 52 00/HAL 00/HAL8' center-to-center 05 (Notice- Posts must be exactly centered to allow for expansion.)
SPRINGFIELD SPRINGFIELD
Post Dimensions:
48" High Fence = 5" x 5" x 72" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 36" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
1" Thick x 6" Wide
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
Post Spacing Options: 8' center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
WINDSOR
Post Dimensions:
48" High Fence = 5“ x 5” x 84“ 60" High Fence = 5“ x 5” x 96“ 72" High Fence = 5“ x 5” x 108“
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 36“ Post Depth 60" High Fence = 36“ Post Depth 72" High Fence = 36“ Post Depth
Standard Post Cap:
5" x 5” Traditional (External Flange)
Horizontal Dimensions:
1" Thick x 6" Wide
WINDSOR
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
383
© 2010 STEEL AND PIPES, INC.
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
SPECIFICATIONS: Standard Height Options:
48", 60", or 72”
05 52 00/HAL 8' center-to-center Post Spacing Options: (Notice- Posts must be exactly centered to allow for expansion.)
HAMPTON HAMPTON STRAIGHT
Post Dimensions:
48" High Fence = 5" x 5" x 72" 60" High Fence = 5" x 5" x 96" 72" High Fence = 5" x 5" x 108"
Standard Post Depth:
(Local Conditions may require additional depth.)
48" High Fence = 24" Post Depth 60" High Fence = 36" Post Depth 72" High Fence = 36" Post Depth
Standard Cap Style:
5" x 5" Traditional (External Flange)
Horizontal Dimensions:
2" Thick x 3 1/2" Wide (Top) 2" Thick x 6" Wide (Bottom)
Radius corner sections also available. Pickets (Verticals): Pickets Dimensions:
HAMPTON SCALLOP
1 7/8 “ Between Pickets 1 1/2” Wide x 1 1/2” Thick
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
HAMPTON STEP
SPECIFICATIONS: Standard Height Options:
36", 42", or 48”
Post Spacing Options: 4' x 6’ center-to-center (Notice- Posts must be exactly centered to allow for expansion.)
HANNIBAL
Post Dimensions:
36" High Fence = 3 1/2" x 3 1/2" x 60" 42" High Fence = 3 1/2" x 3 1/2" x 66" 48" High Fence = 3 1/2" x 3 1/2" x 72"
Standard Post Depth:
(Local Conditions may require additional depth.)
36" High Fence = 24" Post Depth 42" High Fence = 24" Post Depth 48" High Fence = 24" Post Depth
Standard Cap Style:
3 1/2" x 3 1/2" Traditional (External Flange)
Horizontal Dimensions:
3 1/2" Wide x 1 3/4" Thick
Pickets (Verticals): Spacing Between Pickets: Dimensions:
1 3/4“ 3” Wide x 7/8” Thick
© 2010 STEEL AND PIPES, INC.
Ground Clearance: 2" (Grade variations will cause inconsistent ground clearance measurements.)
HANNIBAL
384
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
4” x 4” POST
5” x 5” POST
ITEM NUMBER
DESCRIPTION
PVC.5X5X12 WHITE (.100 WALL) PVC.5X5X16
TUBE PVC 5" X 5" X 12' WHITE (.100) TUBE PVC 5"X5"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.4X4X12 PVC.4X4X16
TUBE PVC 4"X4"X12' WHITE TUBE PVC 4"X4"X16' WHITE
3.5” x 3.5” POST
ITEM NUMBER
DESCRIPTION
PVC.35X35X12 PVC.35X35X16
TUBE PVC 3.5"X3.5"X12' WHITE TUBE PVC 3.5"X3.5"X16'WHITE
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
PVC FENCE PARTS POSTS
2” x 6” PLANK RIBBED
2” x 6” PLANK
1.5” x 5.5” PLANK RIBBED
ITEM NUMBER
DESCRIPTION
PVC.2X6X16.R
TUBE PVC 2" X 6" X 16' RIBBED WHITE
ITEM NUMBER
DESCRIPTION
PVC.2X6X16
TUBE PVC 2"X6"X16' HOLLOW
ITEM NUMBER
DESCRIPTION
PVC.15X55X16.R
PLANK 1.5"X5.5"X16' RIBBED W
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
385
© 2010 STEEL AND PIPES, INC.
PLANKS
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
PVC FENCE PARTS PLANKS 1” x 1” PLANK
1.5” x 1.5” PLANK
1” x 2” PLANK
.875” x 3” PLANK
1” x 4” PLANK
1.75” x 3.50” PLANK
2” x 3.50” PLANK
ITEM NUMBER
DESCRIPTION
PVC.1X1X12 PVC.1X1X16
PVC 1" X 1" X 12' TUBE PVC 1"X1"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.15X15X16
TUBE PVC 1.5"X1.5"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.1X2X12 PVC.1X2X16
PVC 1" X 2" X 12' TUBE PVC 1"X2"X16' WHITE
ITEM NUMBER
PVC.7/8X3X16
© 2010 STEEL AND PIPES, INC.
TUBE PVC 7/8"X3"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.1X4X16
TUBE PVC 1"X4"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.175X35X12 PVC.175X35X16
TUBE PVC 1.75"X3.5" X12' WHITE TUBE PVC 1.75"X3.5"X16' WHITE
ITEM NUMBER
DESCRIPTION
PVC.2X35X16
TUBE PVC 2"X3.5"X16' WHITE
1” x 6” PLANK RIBBED
2” x 7” SLOTTED
386
DESCRIPTION
ITEM NUMBER
DESCRIPTION
PVC.1X6X12.R PVC.1X6X16.R
PLANK 1"X6"X12' RIBBED WHITE PLANK 1"X6"X16' RIBBED WHITE
ITEM NUMBER
DESCRIPTION
PVC.2X7X8
PLANK 2"X7"X8' PRE-SLOT RIBB
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
PVC FENCE PARTS PLANKS .875” x 7” TONGUE AND GROOVE
T-RAIL
ITEM NUMBER
DESCRIPTION
PVC.7/8X7X16.TG
PLANK 7/8"X7"X16' T&G WHITE
ITEM NUMBER
DESCRIPTION
PVC.TRAIL
T-RAIL X 16' (.115)
2” x 8” TONGUE AND GROOVE
ITEM NUMBER
DESCRIPTION
PVC.2X8X16.TG
PLANK 2"X8"X16' T&G WHITE REG
ITEM NUMBER
DESCRIPTION
PVC.3.5X3.5.EPCAP PVC.4X4.EPCAP PVC.5X5.EPCAP PVC.5X5.DFCAP
3.5X3.5 EXTERNAL PYRAMID CAP 4" X 4" EXTERNAL PYRAMID CAP (C-4R9-W) 5" X 5" EXTERNAL PYRAMID CAP (C-5R9-W) PVC 5" X 5" DEEP FLANGE CAP
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
387
© 2010 STEEL AND PIPES, INC.
PVC FENCE PARTS CAPS
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION © 2010 STEEL AND PIPES, INC.
PVC FENCE PARTS CAPS
388
ITEM NUMBER
DESCRIPTION
PVC.4X4.BALLCAP PVC.5X5.BALLCAP
PVC BALL CAP WHITE 4" X 4" PVC BALL CAP WHITE 5” X 5”
ITEM NUMBER
DESCRIPTION
PVC.35X35.GOTHCAP PVC.4X4.GOTHCAP PVC.5X5.GOTHCAP PVC.5X5.GOTHCAPALM
3.5" X 3.5" GOTHIC CAP WHITE 4” X 4” GOTHIC CAP WHITE 5" X 5" GOTHIC CAP WHITE 5" X 5" GOTHIC CAP ALMOND
ITEM NUMBER
DESCRIPTION
PVC.15X15.CAP
1.5"X1.5" PICKET CAP WHITE
ITEM NUMBER
DESCRIPTION
PVC.35X35.NECAP PVC.4X4.NECAP PVC.5X5.NECAP PVC.5X5.NECAPALM
3.5" X 3.5" CAP NEW ENGLAND 4"X4" NEW ENGLAND CAP PVC 5"X5" NEW ENGLAND CAP WHITE 5"X5" NEW ENGLAND CAP ALMOND
ITEM NUMBER
DESCRIPTION
PVC.2X2.CLIP
PERGOLA CLIPS 2" X 2"
ITEM NUMBER
DESCRIPTION
PVC.175X35.CAP PVC.2X6.CAP
PERGOLA CAP FOR 1-3/4"X3-1/2" PERGOLA CAP 2" X 6"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
GATE SOCKETS ( GOES INSIDE POST)
LATCHES ITEM NUMBER
PVC.HLW325R PVC.HLB325R
DESCRIPTION
RESIDENTIAL LATCH WHITE ALUMINUM RESIDENTIAL LATCH-BLACK ALUMINUM
HINGES ITEM NUMBER
PVC.HHB300 PVC.HHW300
ITEM NUMBER
DESCRIPTION
PVC.2X8.S5 PVC.2X35.S35 PVC.2875.SOCKET PVC.15X55.GS5 PVC.175X35.GS35 PVC.175X35.GS4 PVC.175X35.GS5 PVC.2X7.GS5 PVC.2X35.GS4 PVC.2X35.GS5 PVC.35X35.GS5 PVC.2X6.GS5
SOCKET 2" X 8" (5X5) SOCKET 2"X3.5" (3.5X3.5) SOCKET RAIL 2.875" (5X5) GATE SOCKET 1.5X5.5 FOR 5X5 POST GATE SOCKET 1.75X3.5 FOR 3.5POST GATE SOCKET 1.75X3.5 FOR 4X4POST GATE SOCKET 1.75X3.5 FOR 5X5POST GATE SOCKET 2"X7" FOR 5X5 POST GATE SOCKET 2X3.5 FOR 4" POST GATE SOCKET 2X3.5 FOR 5" POST GATE SOCKET 3.5 X 3.5 FOR 5X5 POST GATE SOCKET2X6 FOR 5" POSTS
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
PVC FENCE LOCKS, HINGES AND GATE SOCKETS
DESCRIPTION
PAIR S/S RES. HINGE BLACK PAIR S/S RES. HINGE WHITE
ITEM NUMBER
DESCRIPTION
PVC.HP768W PVC.HP766B
36" DROP ROD WHITE SS 36" BLACK DROP ROD
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
389
© 2010 STEEL AND PIPES, INC.
CANE BOLTS
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION © 2010 STEEL AND PIPES, INC.
PVC FENCE BRACKETS AND RAILINGS
390
ITEM NUMBER
DESCRIPTION
PVC.2X6.RAIL PVC.2X35.BRA PVC.175X35.BRA PVC.150X55.BRA
RAIL MOUNT WHITE 2" X 6" RAIL BRACKET 2" X 3.5" RAIL BRACKET 1-3/4"X3-1/2" RAIL MOUNT BRACKET 1-1/2" X 5-1/2"
ITEM NUMBER
DESCRIPTION
PVC.MS23TS
T-RAIL STAIR BRACKET W/SCREW ZINC 2X3.5
ITEM NUMBER
DESCRIPTION
PVC.MS23TR
T-RAIL BRACKET STRAIGHT W/SCREW ZINC
ITEM NUMBER
DESCRIPTION
PVC.MS235B
2"X3 1/2" STR RAIL BRACKET W/SCREW ZINC
ITEM NUMBER
DESCRIPTION
PVC.MS235S
STAIR RAIL BRACKET W/SCREW ZINC 2 X 3.5"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
DUROFENCE II
Quality for a lifetime...
DUROFENCE II PARTS 906D.206.0508B 906D.206.0608B 906D.2X2B 906D.200.1407B 906D.200.1408B 906D.206.0508 906D.206.0608 906D.2X2 906D.225.1606 906D.225.1607 906D.200.1407 906D.200.1408 906D.200B 906D.200 906D.200G
DESCRIPTION
DUROFENCE BLUE 5' X 8' DUROFENCE BLUE 6' X 8' DUROFENCE BLUE CAP 2"X2" DUROFENCE BLUE POST 2"X2"X7' DUROFENCE BLUE POST 2"X2"X8' DUROFENCE GREEN 5'X8' DUROFENCE GREEN 6'X8' DUROFENCE GREEN CAP 2"X2" DUROFENCE GREEN POST 2-1/4" X 2-1/4" X 6 DUROFENCE GREEN POST 2-1/4" X 2-1/4" X 7 DUROFENCE GREEN POST 2"X2"X7' DUROFENCE GREEN POST 2"X2"X8' DUROFENCE TUBE BRACKET 2-1/4 X 2-1/4 DUROFENCE TUBE BRACKET 2" X2" W/BOLTS DUROFENCE TUBE BRACKETS 2-1/4 X 2-1/4
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
391
© 2010 STEEL AND PIPES, INC.
ITEM NUMBER
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
INSTALLATION CLIPS WITH STAINLESS STEEL BOLTS
.
ST E
P D I P N ES A , L E
SINC
E 1 9 79 SECTION VIEW
392
C IN
© 2010 STEEL AND PIPES, INC.
• Fence Gauge: 4.5mm (3.7 mm before and 4.8mm after PVC coating) • 2 inches x 6 inches holes, pre-galvanized wires, welded and powder coated after. • 2 inches x 2 inches square, thickness of posts: 14 gauge. (1.5 mm before and 1.9 mm after PVC coating). • Electrogalvanized Panels • Then Powder Coated green, blue • Panels to be 8’-0” width • Each Panel needs: (1) ea. Post and Cap. (4) ea. Plastic Clips and S/S Bolts. • Stocking Sizes: 5’-0” Height x 8’-0”Width 6’ -0” Height x 8’-0”Width • Panel can be combined or cut in order to make a higher height if needed.
SECTION VIEW
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION 393
© 2010 STEEL AND PIPES, INC.
CYCLONE FENCE
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
CYCLONE FENCE PARTS AND HARDWARE 18 Chain link fence, also known as cyclone fence, is one of the most popular choices of fence for both light
residential to heavy commercial fence applications. Chain link fence is one of the most practical styles of fence, relatively easy to install, and very cost effective
LOOP CAPS ALUM. ITEM NUMBER
DESCRIPTION
906.002.1510 906.002.1514 906.002.2014
LOOP CAPS 2" X 1-3/8" ALUM. LOOP CAPS 2" X 1-5/8" ALUM LOOP CAPS 2-1/2" X 1-5/8" ALUM.
CANTILEVER ROLLER ITEM NUMBER
DESCRIPTION
906.001.1000 906.001.1500
CANTILEVER ROLLER 2-1/2" X 4" CANTILEVER ROLLER 2-1/2" X 4-1/2"
CAP TWO WAY
CAP ONE WAY ITEM NUMBER
DESCRIPTION
906.003.0150 906.003.0155
CAP ONE WAY 2" X 1-3/8" ALUM. CAP ONE WAY 2-1/2" X 1-3/8" ALUM.
ITEM NUMBER
DESCRIPTION
906.003.0160 906.003.0165
CAP TWO WAY 2" X 1-3/8" ALUM. CAP TWO WAY 2-1/2" X 1-3/8" ALUM.
TENSION BAND
© 2010 STEEL AND PIPES, INC.
BRACE BAND
394
ITEM NUMBER
DESCRIPTION
906.003.0814 906.003.0815 906.003.0816 906.003.0825
BRACE BAND 1-3/8" BRACE BAND 1-5/8" BRACE BAND 2" BRACE BAND 2-1/2"
ITEM NUMBER
DESCRIPTION
906.003.0915 906.003.0918 906.003.0920 906.003.0925 906.003.0930 906.003.0934
TENSION BAND 1-3/8" TENSION BAND 1-5/8 TENSION BAND 2" TENSION BAND 2-1/2" TENSION BAND 3-1/2" TENSION BAND 4-1/2"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
SLEEVES ITEM NUMBER
DESCRIPTION
906.004.0125 906.004.0138 906.004.0158 906.004.0200
SLEEVES 1-1/4" SLEEVE PIPE FENCE 1-3/8" X 6" SLEEVE PIPE FENCE 1-5/8" X 6" SLEEVE PIPE FENCE 2" X 6"
BARBWIRE ARM ITEM NUMBER
DESCRIPTION
906.005.2015 906.005.2017
BARBWIRE ARM A/P 1PC 2" X 1-5/8" GALV BARBWIRE ARM A/P 1PC 2-1/2" X 1-5/8" GALV
TENSION BAR ITEM NUMBER
DESCRIPTION
906.006.0004 906.006.0005 906.006.0006
TENSION BAR 5/8" X 4' TENSION BAR 5/8" X 5' TENSION BAR 5/8" X 6'
PRESSED STEEL CORNER ITEM NUMBER
DESCRIPTION
906.009.1018 906.009.1058 906.009.2000
PRESSED STEEL CORNER ALUM 1-3/8" PRESSED STEEL CORNER 1-5/8" PRESSED STEEL PRESSED STEEL CORNER 2" PRESSED STEEL
RAIL END ALUMINUM ITEM NUMBER
DESCRIPTION
906.006.1038 906.006.1039
RAIL END ALUMINIUM 1-3/8" RAIL END ALUMINIUM 1-5/8"
DOME CAP GALVANIZED ITEM NUMBER
DESCRIPTION
906.006.2030
DOME CAP GALV. 3-1/2"
ITEM NUMBER
DESCRIPTION
906.006.2005 906.006.2006
DOME CAP 2" ALUM. DOME CAP 2-1/2" ALUM.
BARBWIRE PROTECTON WIRE ITEM NUMBER
DESCRIPTION
906.007.0125
BARBWIRE PROTECTON WIRE 15.5 28# 820'
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
395
© 2010 STEEL AND PIPES, INC.
DOME CAP ALUMINIUM
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
RAZOR RIBBON HELICAL ITEM NUMBER
DESCRIPTION
906.007.0560 906.007.0565
RAZOR RIBBON HELICAL S/S 18" X 50' RAZOR RIBBON HELICAL GALV. 18" X 50'
ALUMINIUM TIE WIRE ITEM NUMBER
DESCRIPTION
906.008.0000
ALUMINIUM TIE WIRE
GATE BRACE CLAMP ITEM NUMBER
DESCRIPTION
906.009.2100 906.009.2200
GATE BRACE CLAMP 2-1/2" X 1-3/8" GATE BRACE CLAMP 2-1/2" X 1-5/8"
RESIDENTIAL LOCKS ITEM NUMBER
DESCRIPTION
906.010.1110 906.010.1115 906.010.1120 906.010.1125 906.010.1130 906.010.1135
LOCK RES. 1 3/8" X 1 3/8" S/AUT LOCK RES. 1 3/8 X 1 5/8 S/AUT LOCK RES. 1 3/8 X 2" S/AUT LOCK RES. 1 3/8 X 2 1/2" S/AUT LOCK RES. 1 5/8" X 2" S/ AUT LOCK RES. 1 5/8" X 2 1/2" S/AUT
FEMALE HINGE ITEM NUMBER
DESCRIPTION
906.010.1300 906.010.1500
FEMALE HINGE 1-3/8" PARA PORTON FEMALE HINGE 1-5/8" PARA PORTON
BOULEVARD CLAMP
© 2010 STEEL AND PIPES, INC.
MALE HINGE
396
ITEM NUMBER
DESCRIPTION
906.010.2000 906.010.2500
MALE HINGE 2" PARA PORTON S/T MALE HINGE 2-1/2" PARA PORTON S/T
ITEM NUMBER
DESCRIPTION
906.011.0125 906.011.0126 906.011.0150
BOULEVARD CLAMP 2" X 1-3/8" BOULEVARD CLAMP 2-1/2" X 1-3/8" BOULEVARD CLAMPS 2-1/2" X 1-5/8"
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
18 CARRIAGE BOLTS HDG
CYCLONE FENCE GALVANIZED ITEM NUMBER
906.095.0450 906.095.0550 906.095.0650 906.115.0450 906.115.0550 906.115.0650 906.125.0450 906.125.0550 906.125.0650
DESCRIPTION
CYCL FENCE 4'X50' GALV. G-9.5 CYCL FENCE 5'X50' GALV G-9.5 CYCL FENCE 6'X50' GALV G-9.5 CYCL FENCE 4'X50' GALV G-11.5 CYCL FENCE 5'X50' GALV G-11.5 CYCL FENCE 6'X50' GALV G-11.5 CYCL FENCE 4'X50' GALV G-12.5 CYCL FENCE 5'X50' GALV G-12.5 CYCL FENCE 6'X50' GALV G-12.5
ITEM NUMBER
DESCRIPTION
906.013.0356 906.013.0358 906.013.0360 906.013.0378 906.013.0380 906.013.0382 906.013.0320
CARRIAGE BOLTS HDG 5/16" X 1-1/4" CARRIAGE BOLTS HDG 5/16" X 2" CARRIAGE BOLTS HDG 5/16" X 2-1/2" CARRIAGE BOLTS HDG 3/8" X 1-1/2" CARRIAGE BOLTS HDG 3/8 X 2" CARRIAGE BOLTS HDG 3/8 X 2-1/2 BOLT- ELBOW GATE HDG 1/4"X3/4"
PACKAGE 1LB WIRE ALUMINIUM ITEM NUMBER
DESCRIPTION
906.013.8000
WIRE ALUMINIUM PACKAGE 1LB 8-1/4" X 11"
TENSION WIRE ITEM NUMBER
DESCRIPTION
906.007.0550
TENSION WIRE GA.7X550'
ITEM NUMBER
DESCRIPTION
906.000.4000
FENCE BARRIER SS 4'
BOX OF NAILS ITEM NUMBER
DESCRIPTION
906.0250
BOX OF NAILS ACERO 2 1/2"
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
397
© 2010 STEEL AND PIPES, INC.
FENCE BARRIER
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
CONSTRUCTION PRODUCTS 18
ANCHORING CEMENT ITEM NUMBER
652.76030
DESCRIPTION
ANCHORING CEMENT 4LBS
• Enco Anchoring Cement is a pourable, quick-setting, non-shrinking, cement. It develops high early strength and becomes 50% stronger in one hour than fully cured concrete. Anchoring Cement is used for anchoring machinery, bolts, steel reinforcing rods, and fixtures into concrete on masonry walls and floors. It is used professionally to anchor installations of fences, railings and awning supports.
HYDRAULIC CEMENT ITEM NUMBER
652.76075
DESCRIPTION
HYDRAULIC CEMENT (PAILA)
• Enco Hydraulic Cement is used to correct leaks in concrete or masonry walls, cisterns, swimming pools, fountains and retaining walls. Can be used on concrete pipes where water is or may be present. Stops water flowing and sets in 3 to 5 minutes. • Interior / exterior • Quick-setting hydraulic cement • Waterproof, stops leaks instantly in masonry and concrete (sets from 3 to 5 minutes) • Durable, non-shrinking seal
MEZCLALISTA® ITEM NUMBER
© 2010 STEEL AND PIPES, INC.
652.71077 652.71078
DESCRIPTION
MEZCLA LISTA 50 lbs MEZCLA LISTA 25 lbs
• Mezclalista ® is a blend of Portland Cement and fine sand specially developed for the plastering of cement walls and blocks to both interior or exterior surfaces. Since it is easy to apply, it’s ideal for any small job around the house. • Ready mix concrete plaster cement for wall and floors • Super, high-impact resistance • High bond and compressive strength
398
AQUA HYDRAULIC CEMENT ITEM NUMBER
652.76064
DESCRIPTION
AQUA HYDRAULIC CEMENT GALON
• Aqua Plug is a quick-setting, hydraulic cement that stops leaks in masonry instantly and hardens in 3 minutes to a non-shrinking seal forming a waterproof, durable bond.
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION 399
© 2010 STEEL AND PIPES, INC.
IDEAS...
© 2010 STEEL AND PIPES, INC.
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
IDEAS...
400
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
INDUSTRIAL & RESIDENTIAL FENCES DIVISION
Sliding Gates in PVC
Tel: (787) 747-9415 • Fax: (787)• 747-8986 • www.steelandpipes.com Tel: (787) 747-9415 • Fax: (787) 747-8986 Email: www.steelandpipes.com
401
© 2010 STEEL AND PIPES, INC.
IDEAS...
© 2010 STEEL AND PIPES, INC.
INDUSTRIAL & RESIDENTIAL INDUTRIALFENCES GASES DIVISION
IDEAS...
402
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
MECHANICAL
DIVISION
MECHANICAL DIVISION
GALVANIZED STEEL FITTINGS 150# THREADED • Sizes from 1/8” to 6” in Diameter • Tees, Coupling, Universal Unions, Reduced Couplings, Reduced Bushings, Elbows 90 o- 45 o
BLACK STEEL FITTINGS 150# THREADED
• Sizes from 1/8” to 10” in Diameter • Tees, Couplings, Universal Unions, Reduced Couplings, Reduced Bushings, Elbows 90 o- 45 o
BLACK STEEL WELDABLE FITTINGS 150#
© 2010 STEEL AND PIPES, INC.
• Sizes from 1/4” to 24” • Flanges, Elbows, Concentric Reducer, Eccentric Reducer
404
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
MECHANICAL DIVISION
BLACK STEEL FITTINGS 300#, 2,000# & 3,000#
• Sizes from 1/4” to 4”
PIPE HANGERS
• Clevis Hanger, Riserclamps, U-Bolts, C-Clamps
SCREWS
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
405
© 2010 STEEL AND PIPES, INC.
• All kind of screws in Black and Stainless Steel, G-2 and G-5 • A325 and a variety of Accessories
MECHANICAL DIVISION
VALVES • Up to 3,000# PSI • Avilable in Steel, Bronze, Stainless Steel • Gate, Check, Butterfly Valves
GASKETS
© 2010 STEEL AND PIPES, INC.
• Rubber, Teflon, Non-Ambestos, Flexilatic
406
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
TECHNICAL DATA
METRIC SYSTEM
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
407
© 2010 STEEL AND PIPES, INC.
METRIC SYSTEM
TECHNICAL DATA © 2010 STEEL AND PIPES, INC.
WEIGHT FORMULAS
408
FRACTIONS / DECIMALS / MILLIMETERS DEC.
MIL.
1/64
.0156
.3969
33/64
.5156 13.0969
1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
.0313 .0469 .0625 .0781 .0938 .1094 .125 .1406 .1563 .1719 .1875 .2031 .2188 .2344 .250 .2656 .2813 .2969 .3125 .3281 .3438 .3594 .375 .3906 .4063 .4219 .4375 .4531 .4688 .4844 .500
.7938 1.1906 1.5875 1.9844 2.3813 2.7781 3.1750 3.5719 3.9688 4.3656 4.7625 5.1594 5.5563 5.9531 6.3500 6.7469 7.1438 7.5406 7.9375 8.3344 8.7313 9.1281 9.5250 9.9219 10.3188 10.7156 11.1125 11.5094 11.9063 12.3031 12.7000
17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1
.5313 .5469 .5625 .5781 .5938 .6094 .625 .6406 .6563 .6719 .6875 .7031 .7188 .7344 .750 .7656 .7813 .7969 .8125 .8281 .8438 .8594 .875 .8906 .9063 .9219 .9375 .9531 .9688 .9844 1.000
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
DEC.
MIL. 13.4938 13.8906 14.2875 14.6844 15.0813 15.4781 15.8750 16.2719 16.6688 17.0656 17.4625 17.8594 18.2563 18.6531 19.0500 19.4469 19.8439 20.2406 20.6375 21.0344 21.4313 21.8281 22.2250 22.6219 23.0188 23.4156 23.8125 24.2094 24.6063 25.0031 25.4000
Decimal of a Ft.
Inches
Decimal of a Ft.
Inches
Decimal of a Ft.
1/16............0052 1/8..............0104 3/16............0156 1/4..............0208 5/16............0260 3/8..............0313 7/16............0365 1/2..............0417 9/16............0469 5/8..............0521 11/16...........0573 3/4...............0625 13/16..............0677 7/8...............0729 15/16...............0781
1/16............3385 1/16............6719 1/8..............3438 1/8..............6771 3/16............3490 3/16............6823 1/4..............3542 1/4..............6875 5/16............3594 5/16............6927 3/8..............3646 3/8..............6979 7/16............3698 7/16............7031 1/2..............3750 1/2..............7083 9/16............3802 9/16............7135 .3333 .6667 5/8..............3854 5/8..............7188 11/16...........3906 11/16...........7240 3/4...............3958 3/4...............7292 13/16..............4010 13/16..............7344 7/8...............4063 7/8...............7396 15/16...............4115 15/16...............7448
1/16............0885 1/8..............0938 3/16............0990 1/4..............1042 5/16............1094 3/8..............1146 7/16............1198 1/2..............1250 9/16............1302 .0833 5/8..............1354 11/16...........1406 3/4...............1458 13/16..............1510 7/8...............1563 15/16...............1615
1/16............7552 1/16............4219 1/8..............7604 1/8..............4271 3/16............7656 3/16............4323 1/4..............7708 1/4..............4375 5/16............7760 5/16............4427 3/8..............7813 3/8..............4479 7/16............7865 7/16............4531 1/2..............7917 1/2..............4583 9/16............7969 9/16............4635 .4167 .7500 5/8..............8021 5/8..............4688 11/16...........8073 11/16...........4740 3/4...............8125 3/4...............4792 13/16..............8177 13/16..............4844 7/8...............8229 7/8...............4896 15/16...............8281 15/16...............4948
1/16............1719 1/8..............1771 3/16............1823 1/4..............1875 5/16............1927 3/8..............1979 7/16............2031 1/2..............2083 9/16............2135 .1667 5/8..............2188 11/16...........2240 3/4...............2292 13/16..............2344 7/8...............2396 15/16...............2448
1/16............8385 1/16............5052 1/8..............8438 1/8..............5104 3/16............8490 3/16............5156 1/4..............8542 1/4..............5208 5/16............8594 5/16............5260 3/8..............8646 3/8..............5313 7/16............8698 7/16............5365 1/2..............8750 1/2..............5417 9/16............8802 9/16............5469 .5000 .8333 5/8..............8854 5/8..............5521 11/16...........8906 11/16...........5573 3/4...............5625 3/4...............8958 13/16..............5677 13/16..............9010 7/8...............5729 7/8...............9063 15/16...............5781 15/16...............9115
1/16............2552 1/8..............2604 3/16............2656 1/4..............2708 5/16............2760 3/8..............2813 7/16............2865 1/2..............2917 9/16............2969 .2500 5/8..............3021 11/16...........3073 3/4...............3125 13/16..............3177 7/8...............3229 15/16...............3281
1/16............9219 1/16............5885 1/8..............9271 1/8..............5938 3/16............9323 3/16............5990 1/4..............9375 1/4..............6042 5/16............9427 5/16............6094 3/8..............9479 3/8..............6146 7/16............9531 7/16............6198 1/2..............9583 1/2..............6250 9/16............9635 9/16............6302 .5833 .9167 5/8..............9688 5/8..............6354 11/16...........9740 11/16...........6406 3/4...............9792 3/4...............6458 13/16..............9844 13/16..............6510 7/8...............9896 7/8...............6563 15/16...............9948 15/16...............6615
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
Líderes en el Mercado Europeo Distribuimos, Vendemos y Certificamos a instaladores para que vendan e instalen operadores de portones
Tel: (787) 747-9415 • Fax: (787) 747-8986 • www.steelandpipes.com
409
© 2010 STEEL AND PIPES, INC.
Inches
DIVISIÓN DE OPERADORES DE PORTÓN
TECHNICAL DATA
CONVERTING INCHES INTO DECIMALS OF A FOOT