Stef de Jong | Industrial Product Design | stefdejong@live.nl | linkedin | instagram
TABLE OF CONTENTS | 002
004 | INTRODUCTION 006 | EDUCATION HIGHER PROFESSIONAL EDUCATION 008 | INTERNSHIP ULAMO ULFT 008 | PROJECTS 010 | SOLIDWORKS COMPUTER AIDED DESIGNING 012 | ILLUSTRATOR 014 | PHOTOSHOP 016 | FURTHER AMBITIONS 018 | CONTENTS
INTRODUCTION | 004
Mature In front of you lies the portfolio of Stef de Jong, A young designer with an affection for innovative and modern products, both interior- as consumer products. With a lot of motivation he shows an innovative and fresh look. Orders are dealt with both hands and a professional approach. Stef is convinced that a person only can function if he or she is completely him- or herself. Also if this means that this person “different” is. This difference is in his opinion interesting, mainly because of growing of new ideas.
In this portfolio a part of his work from the last one and a half year is shown. There can be seen an increase in his abilities who he has developed during his training at Industrial Product Design. One of his biggest goals is to improve his abilities in Computer Programs like Photoshop, Illustrator and Solidworks. He has linked his development to the name “Mature” (méy•cher), with a wink to his love for nature en tranquility.
T he on ly li m it is yo ur ow n im ag io na ti on ..
EDUCATION | 006
HAN University of Applied Sciences Stef started his training Automotive at the HAN University of Applied Sciences in Arnhem after passing his High School. Het started his training at Industrial Product Design after completing his first year at Automotive. He also achieved his propeadeutic at this training. He started his first internshipship in the second year of his training, about which will be told later. After completing his internship, he attended classes tot complete his second year. He is now in the third year, in which he’s going to do a second, deepening internship.
Internship at Ulamo in Ulft For his 6 month internship, Stef chose to do his internship at Ulamo in Ulft. This company is engaged in the design, develop and manufacture of radiator enclosures. In addition, the company engages in powder coating. Stef has worked in the R&D department and is engaged in multiple jobs. His main task was to work out an idea sketch to a final design. His second task was to convert Solid XT Files of parts to Sheet Metal Files in SolidWorks. He also designed a lacquer rack for tiny parts who had to be painted.
INTERNSHIP | 008
Main Task The main task was to develop an idea for a new type of radiator enclosure. This design consisted several series-mounted plates. The end result was a producible concept, and a requirement at the designing process was to make use of the own machinery. A second requirement was to make use of excisting, already-produced parts as much as possible. The final requirement was to produce as sustainable as possible and thus minimize material waste.
Render lakrek op neutrale achtergrond
Side Tasks Beside his Main Task, Stef also worked on several smaller tasks. One of this tasks was to convert Solid XT Files of excisting radiator parts to Sheet Metal Files in Solidworks. In addition, he worked on a design of a lacquer rack for tiny parts who had to be painted. For both tasks he had to make dimensional drawings, because
the parts would actually go into production. For this were high level dimensioned drawings required, as is customary in this business. More images can be seen on the next pages.
INTERNSHIP | 009
side panel
upperside
attachment point
assembly
INTERNSHIP | 010
0 "L" -1
. R1
0 "A" -1
7.1 7 79.2
8.9
5.4
23.4
23.5
) 3x °(
5 (3x)
SECTION B-B R1.4
33
9.5
R0.1
4.5 5.5 8
20°
0° 12 R0.5 A
2.7
0.5
0°
12
4.1 Max.
R0.5
8.7 DETAIL A SCALE 2 : 1
DETAIL 2 SCALE 2 : 1 SCHAAL:
1:2
EENHEID:
mm
MATERIAAL: KLEURCODE:
Bouwhoogte
300
400
500
550
600
700
Lengte "L" Lengte "A"
292.8 243.75
392.8 343.75
492.8 443.75
542.8 493.75
592.9 543.75
692.8 643.75
900
PROJEKTIE:
950
NAAM:
DATUM:
GETEKEND:
SdJ
10-12-2012
GECONTR.:
BtB
10-12-2012
UITGEGEVEN: HtB
10-12-2012
ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN:
- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:
TEK. NR.:
115.00.123-00
Side Panel K3 Links
892.8 942.8 843.75 893.75
- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101
HOEK: ± 0,5°
MAAT: ± 0,5 mm
BENAMING:
1
BLAD:
AFNEMER:
ART. NR.:
-
A3
FORMAAT:
file location T:\Projecten\Projecten 2012\12.035 Caradon_Zijpaneel tekening omzetten naar Ulamo tekeningen\3D\
24.9
3.6
0.6 0.1
SECTION F-F
12.2
B
F
8
11 (3x)
R1.5 (2x)
Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.
3.6
21.8
47.3
45
R1 (6x)
125
34
48.2
7
R1 27°
70.2
12
24
40.1
2.8
B
27°
+0.1 38.6 - 0.3
43.6
39.2 149.3
35.6
x)
0.8
(2
R2 (2x)
DETAIL 2
132.2
3
F
TOLERANCES IN ACCORDANCE WITH DIN 7168
2000 4000 2.0
"B" 8.3
A
7.2
9
6.3
7
"A" "C"
R2.7 (4x)
12
11.8 144.6 11.8
SECTION B-B
4
SCALE 1 : 1 SCHAAL:
1:2
EENHEID:
mm
NAAM:
MATERIAAL: KLEURCODE:
"A"
7.5
9.3
=
R2
3.6
400
500
600
700
800
900
1000
1100
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
402
502
602
702
802
902
1002
1102
1202
1402
1602
1802
2002
2202
2402
2602
2802
3002
"B"
403.4 503.4 603.4 703.4 803.4 903.4 1003.4 1103.4 1203.4 1403.4 1603.4 1803.4 2003.4 2203.4 2403.4 2603.4 2803.4 3003.4
"C"
385.8 485.8 585.8 685.8 785.8 884.8 984.8 1084.8 1184.8 1384.8 1584.8 1783.8 1983.8 2183.8 2383.8 2583.8 2783.8 2983.8
PROJEKTIE:
DATUM:
GETEKEND:
SdJ
10-12-2012
GECONTR.:
BtB
10-12-2012
UITGEGEVEN: HtB
10-12-2012
ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN: HOEK: ± 0,5°
MAAT: ± 0,5 mm TEK. NR.:
BENAMING:
- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101
- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:
115.00.125-00
Top Grill K3
1
BLAD: AFNEMER:
ART. NR.:
-
A3
FORMAAT:
file location T:\Projecten\Projecten 2012\12.035 Caradon_Zijpaneel tekening omzetten naar Ulamo tekeningen\3D\
5.3 2.1
DETAIL C SCALE 1 : 1
Bouwlengte = "L"
7.5
)
R5
=
=
x)
(2
SECTION A-A
(2x
=
R2
R3.5
24
12.7
.7
R2
0.7
A
6.7
7.2 5
8.2
B
5.3 8.3
7.8
B
3.3
C
7.5
32.5
150
77.2
15
148.6
47.3
R1.5
42.7
3.3
5
R1
=
Epsilon (Tool Adjt)
+0.033
+0.025
+0.020
+0.017
+0.014
-0.113
-0.100
-0.090
-0.082
-0.06
PERFORATED LENGTH "B"
346
446
546
646
746
846
946
1046
1146
1346
795
55 5
73
6 3 1
1318
1192
1080
980
880
480
680
4
1
130
380
580
780
2
23,5
Volledig aflassen (2x)
10
A A 831
Pos 1 2 3 4 5 6
Aantal 2 2 2 18 1 2
SCHAAL:
1:10
EENHEID:
mm
MATERIAAL: KLEURCODE: PROJEKTIE:
SECTION A-A SCALE 1 : 2
DETAIL A SCALE 1 : 2
Benaming Ligger lang Staander lang Staander kort Haak Ligger kort Naadloze precisiebuis NAAM:
DATUM:
GETEKEND:
SdJ
11-12-2012
GECONTR.:
DtH
11-12-2012
UITGEGEVEN: HtB
11-12-2012
BENAMING:
Oprek-haak_Type 1 AFNEMER:
-
Tekening nr. 505.00.24-00 505.00.25-00 505.00.22-00 505.00.26-00 505.00.23-00 505.00.27-00
ALGEMENE TOLERANTIE TENZIJ ANDERS AANGEGEVEN: HOEK: ± 0,5°
MAAT: ± 0,5 mm TEK. NR.:
- VORM- EN PLAATS TOLERANTIE VLGS NEN EN ISO 1101
- LASSYMBOLEN VLGS NEN EN ISO 1101 - REV. NR.:
505.08.00-00
BLAD:
1
ART. NR.: FORMAAT:
A3
file location T:\500\505 Haken Lakstraat\
B
768
12
1000 120 400 0.5 400 1000 0.8 2000 1.2
16.8
30 120 0.3
=
6 30 0.2
12
0.5 6 0.1
Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.
ABOVE UPTO +/-
Deze tekening is eigendom van Ulamo Metaal BV welke daarop auteursrechten heeft. Zij mag noch gekopieerd, noch aan derden ter kopiëring of namaken getoond worden, zonder toestemming.
NOMINAL SIZE
011 | PROJECTS
Schoolprojecten Stef is on his training quarterly working on a design task. Hereby will be focused on different learning objectives Some of this learning objectives are “Production oriented design”, “target oriented design”, “cost oriented design” and “innovative design”. For the project “Jack in a Box” Stef has developed the learning objective production oriented design. For the project “Child Kart” he has developed the learning objective target oriented design, where is looked at at the wishes of children. At the design of the helping tool for carpet tile positioners he has developed the learning objectives target oriented design and cost oriented design. For the project of the bicycle lamp he has mainly worked on innovative design. All these learning objectives were developed, in addition to the basic learning objectives cooperating and developing. For the project “Jack in a Box” there had to be made a design of the toy on which account has been taken of injection moldability. In this toy there’s a mechanism which gives feedback on the child. This mechanism should be mounted without screws or glue. The toy had to excist only injection moldable parts and the mechanism had to fall into a sort of groove or click system
Afb. X: Render ontworpen kinderspeelgoed
Afb. X: Model van de ontworpen skelter
PROJECTS | 012
Stef also worked on a child kart for little children. Here were the wishes of the target group the most important and account had to be taken of their wishes. To know these wishes, a target group analysis has been done.
Afb. X: Render van het hulpmiddel voor tapijttegelleggers
In his second school year Stef worked on a helping tool for carpet tile positioners. These workers are prone to their backs and for this reason there has to be a solution in the form of a tool. Since the acceptance of the audience is not very high, so account had to be taken of this target group. The cost were very important because it should not exceed the cost of absenteeism. Finally Stef has been working on a new model bike light for an existing bikes line of Dutch largest bicyle company. At this project, it was very important to focus on manufacturability. Because it was a new line of bikes, it was also very important to come out with an innovative design. This had to fit into the style of the bike line.
Afb. X: Render van het ontworpen fietslampje
Stef made ​​his first experiences with SolidWorks on in his training Automotive. At this training there was focused on usage oriented design. For this, he worked a lot with force calculations and tolerances. In his current training Industrial Product Design there is focused on production oriented designing. For this, he looked a lot at material properties and production. The features in SolidWorks that he has developed are the basic modeling features, Sheet Metal, Surface Modelling and force calculations.
Render van buis
SOLIDWORKS | 014
Besides SolidWorks he also has experience in rendering his models in SolidWorks and Keyshot, as seen in some images. He has also worked in the third year of his training with the 3D-program Solid Thinking.
SOLIDTHINKING CAMERA
015 | ILLUSTRATOR
Stef created soms assignments in Illustrator during his training Industrial Product Design. One of the first assignments was to create a simple layout for a washing machine panel. Also making a simple poster was part of the commands. In the third year, he designed an app layout for an electric golf cart, named The Mantys. Here was the intention to design a layout that was both usefull as clearly. In addition to assignments for school, he also designed a baby card, commissioned by prospective parents. This design was thereafter used to print the actual baby card. Finally, he also used Illustrator to design his first portfolio. This portfolio is vieIllustrations and design Š Stef de Jong wable online as full version. Because the
design in Illustrator pleased him so well, he chose to also design his second and improved portfolio in Illustrator. To keep the overview over the pages he has chosen to use InDesign, because he finds that this program is very similar to Illustrator.
ILLUSTRATOR | 016
42:01 71%
“
Welkom op dit portfolio. U kunt hier informatie vinden, verdeeld onder verschillende onderwerpen welke bovenaan deze pagina te vinden zijn. Allereerst zijn mijn ontwikkelingen als student te lezen, gevolgd door mijn ambitie. Vervolgens staat er onder het kopje “CV” mijn Curriculum Vitae beschreven. Tot slot kunt u lezen op welke manier u in contact kunt komen met mij en nog een paar links betreffende mijn opleidingen en ervaringen.
About me
The only limit, is your own imagination...
”
Ervaringen met programma’s
Naam: Stef de Jong Leeftijd: 19 jaar
Photoshop
Woonplaats: Duiven Stef de Jong is een beginnend ontwerper met een affectie voor
Illustrator
innovatieve en moderne producten, zowel interieur- als consumentenproducten. Met veel motivatie toont hij een innovatieve
Microsoft Word, Powerpoint & Excel
en vernieuwende blik. Opdrachten worden met beide handen aangepakt en professioneel benaderd. Lees meer Portfolio Stef de Jong
(c) Copyright 2012
PHOTOSHOP | 018
Beside Illustrator Stef made also a few assigments in Photoshop in the first year of his training. One of the first tasks which Stef has worked on in Photoshop was making a cover of any magazine. This is shown in the illustration. In addition, he
has worked on various deepening assignments in his third year, like a Power Tool and radio as shown below. Hereby there has been took a closer look at the features of Photoshop.
FURTHER AMBITIONS | 020
Stef has a clear ambition, namely to develop his skills in his favorite computer programs. With this he hopes to find a suitable position in business consistent with his training, skills and aspects he loves. In the portfolio he made at the beginning of his training Industrial Product Design, he says the following about his ambitions: “The ambition who has become increasingly clear in recent years is the ambition of purposefulness. Merely by establishing clear and achievable goals can be take further steps. I find it important that commitment is shown and there won’t be shown inactivity. I find it important that commitment is shown and there won’t be shown inactivity. This creates naturally results, which again leads to motivation. Motivation is also one of the main pillars to achieve goals. By showing what someone does love and passion, someone will get further. Hereby it is very important to be innovative, and accept challenges which are be created by themself. At this being innovative, it is important to see all the aspects who concern the objective, and be receptive to innovations.”
CONTENTS | 022
1
Places
000 | UNDERNEATH THE “EMMAPIRAMIDE” ROZENDAAL, THE NETHERLANDS 001 & 003 | “ROZENDAALSE VELD” ROZENDAAL, THE NETHERLANDS 005 | HOGESCHOOL VAN ARNHEM EN NIJMEGEN ARNHEM, THE NETHERLANDS 007 | ULAMO BV ULFT, THE NETHERLANDS 019 | “ROZENDAALSE VELD” ROZENDAAL, THE NETHERLANDS 021 | BEACH OF FARO ALGARVE, PORTUGAL
2
Objects
008 | RENDERS OF BOTH DESIGNS 009 | PARTS OF THE MAIN DESIGN 010 | SOLIDWORKS PARTS AND DRAWINGS 011 | RENDER “JACK IN A BOX” AND SCALE MODEL OF CHILD KART 012 | RENDER CARPET TILE POSITIONER AND RENDER BICYCLE LAMP 013 | EXAMPLE SURFACE MODELLING AND EXAMPLE RENDERING 014 | EXAMPLE SHEET METAL MODELLING, EXAMPLE FORCE CALCULATION AND EXAMPLE SOLIDTHINKING 015 | WASHING MACHINE PANEL AND BIRTH CARD 016 | MANTYS-APP AND OLD PORTFOLIO 017 | MAGAZINE COVER 018 | POWERTOOL AND RADIO