SOUTH HARROW SYDENHAM CROYDON LEYTONSTONE Tel: 020 8426 4177 Tel: 020 8768 4751 Tel: 020 8684 8181 Tel: 020 8539 0513 2tonne Short Chassis Trolley Jack with Storage Case
3tonne Professional Trolley Jack
• Min./Max. Saddle Height: 125/390mm. • Chassis Length: 550mm. • Lightweight heavy-duty construction. • Supplied in tough carry/storage case to keep dirty jack away NOW from contents of car boot. • Model No. 1100CXD • List Price £54.95
ONLY
£36.95
42pc TRX-Star*/Spline/Hex Bit Set 3/8” & 1/2”Sq Drive
• Contents: Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 & 75mm), TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 & 75mm), Drive Adaptors; 3/8”Sq x 10mm Hex, 1/2”Sq x 10mm Hex. NOW ONLY • Model No. AK219 • List Price £33.95
£14.95
Telescopic Magnetic Pick-Up Tool 1kg Capacity
• Min./Max. Saddle Height: 145/490mm. • Chassis Length: 685mm. • Integral cog-type release mechanism with two-piece handle. • Heavy-duty swivel castors and extra large saddle design ease positioning under vehicle. • Fitted with safety overload valve and ‘pump-through’ valve to prevent handle locking NOW ONLY once at maximum lift height. • Model No. 3000CXD • List Price £144.95
£99.95
£22.95
• Hardened carbon steel lead screws and cast jaws. • Wrap-over coil claws for extra safety. • Suitable for use where space under wheel arch is limited. • Use with 1/2”Sq drive wrench. • 230mm Maximum jaw opening. • Model No. AK3841 • List Price £39.95
• Suitable for 310ml cartridges up to 220mm length. • Model No. AK39 • List Price £5.45
NOW ONLY
£2.95
Rivet & Threaded Nut Rivet Kit
NOW ONLY
£19.95
9pc 3/8”Sq Drive 100mm TRX-P* Socket Bit Set
Oil Filter Wrench Claw Type 63-103mm Capacity 3/8” & 1/2”Sq Drive
4pc 3/8”Sq Drive Spark Plug Socket Set
• Satin finished carbon steel construction with 3/8” & 1/2”Sq drive. Suitable also for use with a 21mm spanner. • Claws grip filter tighter as more torque is applied. • Model No. AK642 • List Price £14.95
• Forged, Chrome Vanadium steel, 3/8”Sq drive WallDrive® sockets, polished chrome finish. • Plug retention and external hex. • Sockets: 14, 16, 21mm, 16mm Thin-wall. • Includes thin walled 16mm socket, for where clearance is tight. NOW • Model No. AK6556 • List Price £28.95
£7.95
NOW ONLY
Skeleton Type Manual Caulking Gun
• Chromed metal body with pocket clip for safe storage. • 1kg Pick-up capacity from Ø6mm magnet. • Minimum/Maximum NOW ONLY Length: 120/600mm. • Model No. AK651 • List Price £9.95
NOW ONLY
• Min./Max. Height: 280/420mm. • 6tonne per pair. • Ratchet type with cast iron support posts. • Tough steel plate welded bases. • Model No. VS2003 • List Price £32.95
2pc Coil Spring Compressor
• Drop-forged Chrome Vanadium steel sockets with S2 steel TRX-P* bits. • TRX-P* fixings are now commonplace on modern vehicles and if a TRX-Star* bit is used on a TRX-P* fixing it can result in damage to the fastener and tool. • Sizes: TP10, TP15, TP20, TP25, TP27, TP30, NOW TP40, TP45, TP50. • Model No. AK6223 • List Price £42.95
£5.95
Ratchet Type Axle Stands 3tonne Capacity per Stand
ONLY
£19.95
• Drop-forged frame with patented folding mechanism for compact storage. • Comfortable cushion grips. • Heavy-duty head suitable for fixing blind rivets and threaded nut rivets to thin sheet material. • Suitable for aluminium, NOW ONLY steel and stainless steel. • Model No. AK39602 • List Price £119.95
£74.95
6pc Double End Drain Key Set
ONLY
£14.95
• Fits wide range of today’s vehicles. • Double end carbon steel keys with satin chrome finish. • Contents: Hex; 5/8”, 9, 10, 12, 14, 17mm, Square; 3/8”, 8, 11, NOW ONLY 13mm, Tommy Bar. • Model No. AK659 • List Price £20.95
£9.95
All Prices + VAT
360° 10 SMD + 3W LED Cordless Lithium-ion Rechargeable Inspection Lamps
Air Operated Underbody Coating Gun
List Price
LED360
Black
£64.95
LED360G
Green
£64.95
LED360R
Red
£64.95
NOW ONLY
£46.95 £46.95 £46.95
Twin Leg Cylinder Hone
Model No. LED360R
Detail
Model No. LED360
Model No
Model No. LED360G
• Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. • Each lamp houses 10 super bright SMD LEDs providing up to 400 lumens output with 120° spread of light, illuminating the whole work area. • Includes an additional high power 3W LED in the end for use as a directional torch. • High quality 2.2Ah Lithium-ion battery has a much slower discharge than traditional Ni-MH batteries. • Operating Time: 3/6hrs. • Charging Time: 4hrs. • Min./Max. Length: 260/280mm.
12V RoadStart® Emergency Power Pack 1000 Peak Amps
• Flexible drive shaft and adjustable cutting control. • Fitted with 28.5mm (1-1/8”) medium grade stones with adjustable capacity from Ø20-64mm. • Suitable for small NOW ONLY brake cylinders. • Model No. VS022 • List Price £12.45
£7.95
• Cable & Clamp Length: 0.5mtr. • Delivers up to 1000 Peak Amps of initial starting power. • Starts up to 30 cars before recharging, depending on the length of crank time needed to start each one. • Monitor power pack condition using TEST function. • Model No. RS1 • List Price £169.95
• Cable & Clamp Length: 1mtr. • Easy-to-read, colour coded analogue gauge measures battery condition and charge indicator. • Audible warning system for polarity protection. • Composite case with battery clip storage lugs and carry handle. • 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. • Model No. RS125 • List Price £319.95
Ø115mm Angle Grinder 900W
• Welding helmet with infinitely adjustable shade control between 9-13. • Fully automatic switching from light to dark on striking arc. • Features sensitivity and delay controls for switching light to dark. • Solar panel power supply no batteries required. • Model No. S01001 • List Price £61.95
• Suitable for a variety of trade applications. • Heavy-duty alloy bevel gear head with composite body casing. • Heavy-duty 900W motor develops powerful 11000rpm (no load speed). • Features spindle lock for fast loading/unloading of discs. • Supplied with side handle, guard and spanner. • BS Approved non-rewirable plug with 3mtr power cable. • Grinding disc not included. NOW ONLY Order Model No. PTC/115G. • Model No. SG115 • List Price £44.95
£49.95
£33.95
Mechanic’s EVA Mat Set - 28mm
6pc Alternator Freewheel Pulley Removal Set
• Easy removal of freewheel pulley from alternator either on or off the vehicle. • Allows alternator shaft to be held while the pulley retainer is removed. • Applications: Audi, BMW, Citroen, Ford, Mercedes, Peugeot, Porsche, NOW Renault, Skoda, Vauxhall/Opel. • Model No. SX400 • List Price £32.95
ONLY
£18.95
• Quality 28mm EVA mats ideal for the busy mechanic. • Set comprises full length and kneeler mats. • For use on workshop floors when working on wheels, brakes, tyres and exhausts etc. • Also ideal for roadside repairs. • Sizes: Kneeler; 450 x 215 x 28mm, Full Length; 980 x 380 x 28mm. NOW • Model No. VS8572 • List Price £41.95
NOW ONLY
£239.95
7pc 1/2”Sq Drive Locking Wheel Nut Removal Set
Auto Darkening Welding Helmet Shade 9-13
NOW ONLY
£12.95
12V/24V RoadStart® Emergency Power Pack 3000/1500 Peak Amps
NOW ONLY
£119.95
• Professional coating gun suitable for automotive and general industrial applications. • Accepts most popular types of 1ltr coating tin. • Supplied with extended flexible nozzle for wax spraying cavities. • Air Inlet Size: 1/4”BSP. NOW ONLY • Air Supply: 90psi/8cfm. • Model No. SG14 • List Price £19.95
ONLY
£22.95
• Forged Chrome Molybdenum steel 1/2”Sq drive sockets for removal of wheel locking nuts. • May also be used on fixings too damaged or corroded for standard sockets. • Suitable for use with impact wrenches. • Contents: 17, 18.5, 20, NOW ONLY 21.5, 23, 24.5, 26mm. • Model No. SX202 • List Price £49.95
£33.95
Diesel & Petrol Fuel Pump Priming Tool
• Required for priming injection pump. • Use after diesel filter change, drainage of fuel tank or any other disturbance of the fuel system. • Supplied with two fuel pipe clips. • Suitable for 9mm bore hose. NOW ONLY • Model No. VSE055 • List Price £15.95
£9.95
All Prices + VAT
3/8”Sq Drive Flexible Ratchet Wrench
1/4” Hex Stainless Steel Micro Ratchet Bit Driver
450mm 3/8”Sq Drive Breaker Bar
• Hardened and tempered Chrome Vanadium steel ratchet wrench with a fully polished mirror finish. • Slim style contoured handle with pear-head design. • 180° Flexi-head and handle offer increased access for hard to reach applications. • Features flip reverse and NOW ONLY quick release mechanism. • Model No. AK673 • List Price £34.95
• Manufactured from high quality stainless steel with a fully polished satin finish. • Length: 85mm. • 72-Tooth, ultra-smooth ratchet with slide reverse. • Additional drive at the NOW ONLY base of handle. • Model No. AK6962 • List Price £19.95
• Hardened and tempered Chrome Vanadium steel bars with high chrome finish. • Long, slim style handle with spring loaded socket retention. NOW • Fully replaceable knuckle joint. • Model No. AK729 • List Price £18.45
750mm 1/2”Sq Drive Breaker Bar
3pc Pliers Set
• Length: 750mm. • Hardened and tempered Chrome Vanadium steel bar with high chrome finish. • Long, slim style handle and spring loaded socket retention. NOW • Fully replaceable knuckle joint. • Model No. AK7302 • List Price £28.95
• Manufactured from hardened and heat treated Chrome Vanadium steel. • Finely ground heads with a fully polished finish. • Serrated jaws and precision ground cutting edges, induction hardened 55-65 HRC for cutting hard and soft wires. • Vinyl dipped handles NOW ONLY for comfort and control. • Model No. AK8564 • List Price £37.95
£18.95
ONLY
£14.95
8ltr Oil/Fluid Drain Pan
£12.95
• Made from high density polyethylene with UV stabilisers. • Large enough for single oil change. • Includes oil pouring lip, hanging hole and back-shelf with protruding stub for oil filters. • Model No. NOW ONLY DRP01 • List Price £8.45
£4.95
2ltr Measuring Jug with Flexible Spout
• Robust and stable ergonomic design. • Manufactured from hard wearing polyethylene, resistant to oil, fuel and most acids. • Removable flexible spout. • Model No. J2F NOW • List Price £11.95
ONLY
£7.95
£9.95
3pc 280mm Needle Nose Pliers Set
£19.95
Twin Barrel Foot Pump
• • • •
Finely ground heads with a fully polished finish. Serrated, machined jaws for a positive grip. Long, slim design ideal for use in areas with limited access. Vinyl dipped handles NOW ONLY for comfort and control. • Model No. AK8568 • List Price £49.95
1600W 2-Speed Hot Air Gun 370°C/500°C
• Two step switch for temperature and airflow control. • Gun is designed to stand vertically, allowing use as a safe Bunsen burner alternative. • Temperature Range: 370°C/500°C. • Model No. NOW HS105 • List Price £28.95
Battery Fluid Filler
5ltr Oil Container with Lid & Flexi-Spout
• Battery top-up jug with push release spout to minimize spillage. • Capacity: 2ltr. • Model No. JBF1 • List Price NOW £7.95
ONLY
£24.95
• Tough polyethylene jug resistant to oil, fuel and most acids. • Removable flexible spout. • Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages. • Model No. JDL5 • List Price £13.95
ONLY
£5.95
£23.95
Rotary Oil Drum Pump 0.2ltr/Revolution • Fits most 205ltr drums. • For use with oils and other non-corrosive fluids with similar viscosity. • Delivery: 0.2ltr/revolution. • Model No. TP55 • List Price £33.95
• High power, steel framed foot pump with two Ø50 x 120mm steel barrels. • Dial type pressure gauge with rotating bezel. • Gauge calibrated in psi and bar and ranging from 0-100psi and 0-7bar. • Fitted with 610mm flexible pressure hose with locking connector. • Model No. FP2 NOW ONLY • List Price £19.95
£12.95
ONLY
NOW ONLY
£8.45
NOW ONLY
£24.95
Syphon Pump for 205ltr/48gal Drum Male Fitting • Composite pump with self-priming feature. • Suitable for oils and non-aggressive chemicals. • Model No. TP78 • List Price £12.95
NOW ONLY
£9.95
All Prices + VAT
Diesel Engine Setting/Locking Kit Belt Drive
Petrol Engine Setting/Locking Kit Belt/Chain Drive
Petrol Engine Setting/Locking Kit Chain Drive
• For VAG 1.4D, 1.9D, 2.0D TDiPD (Pumpe Duse) and 1.2D, 1.6D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner. • Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins. • Use with Associated Tool - Model No. VSE5752 Tensioner Adjuster Set. NOW ONLY • Model No. VSE2358 • List Price £32.95
• Covers the complete range of Ford Duratec engines 1.25 through to 2.3 16v in both belt and chain drive variants. • Set is suitable for these engines in Mazda and Volvo vehicles. NOW • Model No. VSE5515 • List Price £22.45
• Kit includes locking tools for 1.0, 1.2, 1.4 EcoTec/ecoFlex (codes X and Z) chain engines. • Also includes the timing disc position gauge for the timing sensor on the inlet camshaft. • Supplied in storage case. NOW ONLY • Model No. VSE243 • List Price £55.95
Petrol Engine Setting/Locking Kit Chain Drive
Diesel Engine Setting/Locking Kit Chain Drive
Diesel Engine Setting/Locking Kit Belt Drive
• Timing kit suitable for 1.2/1.4TFSi and 1.4/1.6FSi engines. • Kit contains essential tools for crank TDC positioning, camshaft setting and NOW ONLY tensioner locking. • Model No. VSE5956A • List Price £89.95
• Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines. • Set also includes a NOW tensioner locking pin. • Model No. VSE5881A • List Price £59.95
• For VAG 1.2D, 1.4D & 1.9D TDiPD (Pumpe Duse) engines with Hydraulic Belt Tensioner. • Kit includes crankshaft locking tool (round gears), plus camshaft and tensioner locking pins. • Use with Associated Tool - Model No. VSE5752 NOW ONLY Tensioner Adjuster Set. • Model No. VSE2356 • List Price £19.95
Diesel Engine Setting/Locking Tool Kit Belt Drive
500mm 1/2”Sq Drive Impact Bar
Diesel Engine Setting/Locking Kit Belt Drive
• Specially designed for use where nuts/bolts are not easily accessible for air impact tools, or air is not available. • Ideal tool for loosening crankshaft pulley bolts. • Simply fit the required impact socket, keeping the arm at a right angle to the shaft for maximum torque, and strike the top of the tool with a hammer to shock the nut or bolt loose. • Features hand guard for NOW ONLY extra safety. • Model No. VS786 • List Price £47.95
• Comprehensive kit covering engine timing and belt replacement on VAG 1.2 - 2.0D Pumpe Duse and 1.2, 1.6, 2.0D Common Rail diesels. • Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins NOW ONLY and tensioner adjustment tools. • Model No. VSE5951 • List Price £119.95
Diesel Engine Setting/Locking Kit Belt Drive
Petrol Engine Timing Kit
£19.95
£62.95
• Set of locking pins for timing belt replacement on PSA 1.4 (DV4) and 1.6 (DV6) diesel engines fitted in Citroen, Peugeot, Ford, Mazda, Suzuki, Toyota and Volvo models. • These timing pins lock and hold the camshaft, crankshaft, flywheel and HP NOW ONLY pump in the timed position. • Model No. VSE5846 • List Price £14.75
£8.95
Diesel/Petrol Engine Setting/ Locking Combination Kit Belt/Chain Drive
• Suitable for Ford, Land Rover, Mazda, PSA, Suzuki and Volvo vehicles. • Kit consists of camshaft, crankshaft/flywheel and tensioner locking tools, plus camshaft NOW ONLY sprocket remover. • Model No. VSE5042A • List Price £159.95
£109.95
ONLY
£15.95
ONLY
£41.95
£29.95
• Kit covers engine timing and balance shaft setting on 2.5 & 2.8CRD diesel engines in Chrysler, Jeep and LDV models. • Contains camshaft, crankshaft and balance shaft locking pins plus tensioner adjuster. NOW ONLY • Supplied in storage case. • Model No. VSE5056 • List Price £79.95
£56.95
£39.95
£12.95
£84.95
• Suitable for timing belt replacement on the 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles. • These engines will require the use of associated tool, Model No. VSE5033, VSE5034 or VSE5734 Camshaft Sprocket Holding Tool, to loosen the camshaft sprocket bolts and VSE5035 Timing Belt Guide Roller Wrench. • Supplied in storage case. NOW ONLY • Model No. VSE5071 • List Price £59.95
£41.95
All Prices + VAT
Diesel Engine Setting/ Locking Kit Belt Drive
• Essential Tools for timing belt replacement on Renault/Nissan 1.5D dCi diesels. • Covers engine codes K9K. • These engines are also fitted in Suzuki and Dacia models. • Model No. NOW ONLY VSE1901A • List Price £19.95
£13.95
Petrol Engine Setting/ Locking Kit Belt Drive
Diesel Engine Setting/ Locking Kit Chain Drive
Petrol Engine Crankshaft Locking Pin Belt Drive
• Designed to fit between camshaft sprockets to maintain camshaft timing position. • Essential tools for timing belt replacement applications. • Model No. NOW ONLY VS1700 • List Price £19.95
• Provides timing retention for Ford 2.0, 2.2, 2.4 & 3.2 Duratorq ‘Puma’ chain diesel engines. • Kit comprises Flywheel Locking Pins, Camshaft and Injection Pump Locking Pins, Tensioner Locking Pin. • Model No. NOW ONLY VSE5842 • List Price £19.95
• Pin is screwed into the side of the engine to locate the crankshaft in the timed position. • Applies to Zetec/Duratec engines in Fiesta, Fusion and Focus. • Also suitable for some Mazda and Volvo vehicles. • Model No. NOW ONLY VSE4143.32 • List Price £5.95
£12.95
£12.95
£3.95
Diesel Engine Setting/Locking Kit Belt Drive
Crankshaft Pulley Holder Honda
• Essential tools for timing belt replacement on Renault/ Nissan 1.5D, 1.9D, 2.2D & 2.5D dCi diesel engines. • Covers engine codes K9K, F9Q, G9T, G9U. • Kit includes crankshaft locking pins, belt tensioner tools and NOW ONLY camshaft setting plates. • Model No. VSE5871A • List Price £199.95
• Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt. • Suitable for most Honda vehicles fitted with hydraulic PAS. • Use with 1/2”Sq drive breaker bar. • Model No. VSE5048 • List Price £35.95
Petrol Engine Setting/Locking Kit Belt Drive
Petrol Engine Setting/Locking Kit Belt Drive
Diesel Engine Setting/Locking Kit Belt Drive
• Updated kit suitable for timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles. • These engines will require the use of associated tool, Model No. VSE5033, VSE5034 or VSE5734 Camshaft Sprocket Holding Tool, to loosen the NOW ONLY camshaft sprocket bolts. • Model No. VSE5071A • List Price £79.95
• Kit comprises camshaft setting tool and belt tensioner locking pin. • Suitable for engine timing applications on all 1.4, 1.6 and 1.8 Twinport engines with belt drive. • Model No. VSE131 • List Price £31.95
• Suitable for timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9D CDTi/TiD/TTiD or 2.0D CDTi engines. • Kit contains camshaft setting tools, crankshaft locking tool and tensioner pin. NOW ONLY • Supplied in storage case. • Model No. VSE5886A • List Price £69.95
Petrol Engine Setting/Locking Kit Belt Drive
• Kit covers timing belt replacement and timing adjustment on Ford 1.6Ti-VCT petrol engines. • Includes VCT setting plate, flywheel locking tool, camshaft and tensioner pins. • Also includes camshaft setting plate for timing NOW adjustment applications. • Model No. VSE5041A • List Price £69.95
ONLY
£42.95
£56.95
Auxiliary Stretch Belt Removal/Installation Tool
• Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering. • Prevents damage to the pulley and prolongs the life of the belt. • Two tools included, one for installation and one for removal. NOW ONLY • Fits most crankshaft pulleys. • Model No. VS787 • List Price £46.95
£29.95
£139.95
NOW ONLY
£19.95
Petrol Engine Setting/Locking Kit Chain Drive
• Kit contains camshaft setting tools and flywheel locking pin for timing 1.2 3 cylinder 6 and 12 valve chain drive engines. • These engines are fitted in Seat, Skoda and VW vehicles. NOW ONLY • Supplied in storage case. • Model No. VSE5921 • List Price £68.95
£48.95
NOW ONLY
£21.95
£38.95
Petrol Engine VAG, Belt Replacement + 1.8, 1.8T Chain in Head Service Kit
• Essential Setting and Locking tools for timing belt replacement on a huge range of VAG diesel and petrol engines. • Also suitable for chain in head service and tensioner applications on 1.8/1.8T engines. • Includes camshaft, injection pump locking tools and cambelt tensioner tools. • Model No. VSE5851 • List Price £99.95
NOW ONLY
£64.95
All Prices + VAT
• Suitable for push-back and wind-back brake pistons. • Includes left and right-handed thrust bolt assemblies. • Left-handed thrust bolt required for Ford, Citroen and Renault applications. • Kit helps prevent damage to pistons and seals. • Model No. VS0285 • List Price £149.95
2pc Decarbonising Brush Set
4-Way Lug Wrench
• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. NOW ONLY • Shank Ø: 6mm. • Model No. VS1801 • List Price £5.95
• Forged construction with hot forged sockets and baked finish. • Socket Sizes: 17, 19, 21, 22mm. • Model No. AK2090 • List Price £8.95
Diagnostic Socket Memory Safe EOBD
Drain Plug Thread Repair Kit
• Polarity protected unit attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. • Features surge protection and three LEDs to indicate NOW ONLY power supply status. • Model No. VS2072 • List Price £24.95
• Superb for repairing sump, gearbox and differential drain plug threads. • Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). • Tap Sizes: M13 x 1.5, M15 x 1.5, NOW ONLY M17 x 1.5, M20 x 1.5mm. • Model No. VS660 • List Price £69.95
£2.95
NOW ONLY
NOW ONLY
£4.95
£89.95
Diesel Injector Puller Mercedes Cdi
• Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDi engines. • Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover. • This engine is fitted mainly to C-Class, E-Class and Sprinter vehicles. NOW ONLY • Supplied in storage case. • Model No. VS2056 • List Price £114.95
£16.95
Rebound Spring Strut Tool
£34.95
Trailing Arm Bush Tool Ford Mondeo Mk4
£59.95
Brake & Clutch Bleeding System • Reservoir holds 2.5ltr of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry. • Pressure range makes unit suitable for use with ABS systems. • Fitted with Ø42mm cap with 90° angled connector which is suitable for most European models. • For other applications order optional Brake Reservoir Cap 42mm Straight Connector Model No. VS820SA or Universal Adaptor NOW Model No. VS820UA. • Model No. VS820 • List Price £79.95
• Allows the piston to be held safely in the extended position when replacing internal rebound spring shock absorbers (MacPherson Strut). • These shock absorbers are used to reduce vehicle roll and in some cases replace the use of the anti-roll bar which is becoming more popular on modern vehicles. • Max. Piston Shaft Size/Puller NOW ONLY Extension: Ø16.5mm/60mm. • Model No. VS392 • List Price £199.95
£139.95
• Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford vehicles. • Can be used in situ without removing the arm from the vehicle. • Also suitable for some Volvo vehicles that share the same Ford platform. NOW ONLY • Supplied in carry-case. • Model No. VSE4784 • List Price £249.95
£174.95
SOUTH HARROW Unit 9/10, Harrow Industrial
ONLY
£54.95
Petrol Engine Setting/Locking Kit Vauxhall/Opel, Chevrolet, Saab EcoTec 1.4, 1.6, 1.8 16v - Belt Drive
Estate, Brember Road, South Harrow HA2 8AX Tel: 020 8426 4177 E-Mail: jay@volkspares.co.uk
CROYDON Contact: Alpesh Desai Unit 2, The Tramsheds, Coomber Way, Croydon CR0 4TQ Tel: 020 8684 8181 E-Mail: alpesh.desai@volksparesco.uk
LEYTONSTONE
• Set includes camshaft locking tool, designed to fit between camshaft sprockets to retain timing position on 1.4, 1.6 and later 1.8 16v EcoTec engines. • Also includes flywheel holding tool (for crankshaft pulley removal) and auxiliary belt tensioner locking pin, which are required during timing belt NOW ONLY replacement on these engines. • Model No. VSE5005 • List Price £25.95
£17.95
Prices Valid Until 30TH JULY 2014
Contact: Michael Barret 591 High Road, Leytonstone, London E11 4PA Tel: 020 8539 0513 E-Mail: michael@volkspares.co.uk
SYDENHAM Contact: Andy Davies 104-106 Newlands Park, Sydenham, London SE26 5NA Tel: 020 8768 4751 E-Mail: andy@volkspares.co.uk
All Prices + VAT
*TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.
30pc Brake Piston Wind-Back Tool Kit