Astbury 340

Astbury 3 Part Mixer Ref. AT3046 Chrome £490 Ref. AT3047 Pewter £562 Ref. AT3073 Forged Brass £589

LP Min. 0.4 bar pressure required 360˚ swivel spout Mounting hole size Ø 3 x 25mm Tap-hole centres 100-260mm

Astbury 3 Part Mixer with independent Hendon Handspray Ref. AT3050 Chrome £694 Ref. AT3051 Pewter £793 Ref. AT3075 Forged Brass £834

HP Min. 1.0 bar pressure required

The Handspray

The Handspray supplied with models AT3009 & AT3011 is designed to be plumbed independently from the tap. This means it will operate by simply pressing the trigger without having to turn on the tap. It can only have a single water supply - either hot or cold can be applied. Astbury Dual Lever Bridge Mixer Ref. AT3008 Chrome £504 Ref. AT3010 Pewter £546 Ref. AT3072 Forged Brass £606

LP Min. 0.4 bar pressure required 360˚ swivel spout Mounting hole size Ø 2 x 25mm Tap-hole centres 155-253mm Extra long fixing legs 100mm+

Astbury Dual Lever Bridge Mixer with independent Handspray Ref. AT3009 Chrome £709 Ref. AT3011 Pewter £778 Ref. AT3074 Forged Brass £849

HP Min. 1.0 bar pressure required 360˚ swivel spout Mounting hole size Ø 2 x 25mm Tap-hole centres 155-253mm Pull-out hose length 600-700mm Extra long fixing legs 100mm+

Bayenne Monobloc Mixer and Handspray shown in Pewter

Bayenne Dual Lever Monobloc Mixer Ref. AT3024 Chrome £510 Ref. AT3026 Pewter £553 Ref. AT3090 Century Copper £583 Bayenne Single Lever Monobloc Mixer Ref. AT3028 Chrome £470 Ref. AT3030 Pewter £514

MP Min. 0.5 bar pressure required 360˚ swivel spout Mounting hole size Ø 35mm

Bayenne Single Lever Monobloc Mixer with integrated Handspray Ref. AT3029 Chrome £640 Ref. AT3031 Pewter £709 Ref. AT3088 Century Copper £769

HP Min. 1.5 bar pressure required 360˚ swivel spout Tap mounting hole size Ø 35mm Pull-out hose length 600-700mm Handspray mounting hole size Ø 25mm

The Handspray

The Handspray supplied with models AT3029/31 & AT3025/27 is integrated this means the water temperature and flow rate are regulated by adjusting the tap controls and then diverted by pressing the trigger on the spray, once this trigger is released the water flow will revert back to the tap. If fitted within 200 mm of the tap there is a useful pull-out hose length available of approximately 700 mm.

Bayenne Dual Lever Monobloc Mixer with integrated Handspray Ref. AT3025 Chrome £690 Ref. AT3027 Pewter £758 Ref. AT3086 Century Copper £789

HP Min. 1.5 bar pressure required 360˚ swivel spout Tap mounting hole size Ø 35mm Handspray mounting hole size Ø 25mm Pull-out hose length 600-700mm