Stone Tools And More by Stone Tools And More, LLC

Stone Tools & More has established itself in the state of Arkansas as Distributor of High quality Diamond Tooling for use in the concrete, granite countertop industry, and kitchen/bath sinks. With years of experience, Stone Tools & More has combined the best products from top manufacturers with fast shipping and excellent customer service. In this catalog, you will ďŹ nd a vast array of quality products for the stone fabrication industry that deďŹ ne dependability, durability, and affordability. Stone Tools & More is committed to sourcing, developing, and distributing the most innovative, cost-effective products from the worlds leading and most trusted manufactures.

16401 Chenal Valley Dr #8210 - Little Rock, AR 72223 Cell Ph: 501 786 7157 - Email: jose@stonetam.com www.stonetoolsandmore.com

TABLE OF CONTENTS

CUTTING

INSTALLATION & SHOP SUPPLIES

INSTALLATIO

Turbo Blades ................................................................................04-07

Omni Cubed No-Spin Backer Pads and Miter-it Clamps..................... 82

Electroplated and Marble Blades ..................................................08-09

Clamps and Suction Cups.................................................................. 83

Contour Blades, Tile and Porcelain Blades ................................... 09-13

Sink Mounting Systems and Anchors...........................................84-85

Glass and Tuck Point Blades..........................................................14-15

Corbels, Support Brackets................................................................. 86

Specialty and Segmented Blades...................................................15-16

Rodding Material............................................................................... 86

Portable Rail Saw Blades...............................................................16-17

Wedges, Shims.................................................................................. 87

Bridge Saw Blades and Milling Wheels .........................................17-23

Burn-in Sticks, Template Material, Markers, Squeegees, etc.........88-89 Knives, Razor Blades, Scrapers, Wall Stripper................................... 90 Gloves, Glasses, Masks, Boots, Aprons, etc ................................ 91-96

POLISHING SYSTEMS

Preparation Stage Pads......................................................................24

Wet Polishing Pads.......................................................................25-29 Dry Polishing Pads ...................................................................... 30-31 Specialty Polishing Systems, Auto Edge Tooling................................31-40 Diamond Hand Pads & Polishing Drums ..................................... 40-41 Sandpaper and Accessories..........................................................41-43

Tapes, Countertop Cover, Fiberglass Mesh, and Gloss Meter............. 97

Steel Wool, Tapes, Bufﬁng Pads, etc .................................................98 Power Cords, Dust Collection System................................................99

MACHINES

Makita Kits ...............................................................................100-101 Variable Speed Grinders ...........................................................103-104

DRILLING

Dry Core Bits ................................................................................44-45 Wet Core Bits................................................................................45-46 Marble Core Bits................................................................................ 46 Specialty Core Bits........................................................................47-48

Single Speed Grinders .....................................................................105 Large Grinders .................................................................................105 Electric Wet Polishers.......................................................................106 Pneumatic Wet Tools ................................................................107-110 Electric Dry Polishers and Sanders ..................................................111 Die Grinders .....................................................................................111 Circular Saws ...........................................................................112-114

GRINDING

Professional Saws ....................................................................114-118

Cup Wheels ..................................................................................49-52

Surface Polishing Machine...............................................................118

Grinding Wheels ............................................................................... 53

Stone Router.............................................................................119-120 Specialty Machines, NSI Solutions Systems.............................121-122

PROFILING

Blue Ripper Miter Master Saw, T-31 Anchor Machine...................... 123 Dehydrator........................................................................................124

Router Bits and Proﬁling Tools.....................................................54-56

MATERIAL HANDLING

CHEMICALS

MATERIAL HANDLING

CHEMICALS

Adhesives................................................................................. 125-133

Stone Lifters................................................................................. 57-60

Caulks and Sealants .................................................................134-135

A-Frames...................................................................................... 61-62

Impregnators and Sealers.........................................................136-141

Tables................................................................................................ 63

Enhancers ................................................................................142-146

Carts and Dollies...........................................................................64-66

Cleaners ...................................................................................146-154

Booms............................................................................................... 67

Waxes & Polishers ...................................................................155-158

Racks............................................................................................67-68

Other Chemicals and Accessories.............................................159-160

Clamps and Accessories...............................................................69-71 Omni Cubed Products..................................................................72-81

SINKS

Duragranit.................................................................................162-167 304 Stainless Steel Pressed Sinks............................................ 170-175 304 Stainless Steel Handmade Sinks........................................176-181 Stainless Steel Handmade Apron Front Sinks........................... 182-184 Ceramic Sinks ..........................................................................184-185

See pages 189-191 for Index

Ceramic Vessel Sinks....................................................................... 186 Sink Accessories...................................................................... 186-187

STONE PLATINUM CUTTING SPEED BLADE LIFE CLEAN CUTTING QUIET OPERATION VALUE

ALPHA PLUS CUTTING SPEED BLADE LIFE CLEAN CUTTING QUIET OPERATION VALUE

SUPER CYCLONE CUTTING SPEED BLADE LIFE CLEAN CUTTING QUIET OPERATION VALUE

FEATURES: • Superior cutting and premium performance • High diamond concentration for extra long life • Turbo rim for fast cut and minimal chipping

PEARL P5 CUTTING SPEED BLADE LIFE CLEAN CUTTING

• Wet or dry cutting • 8mm rim height

QUIET OPERATION VALUE

PART #

DESCRIPTION

SIS-SPLTB4G 4” Stone Platinum Granite Turbo Blade SIS-SPLTB45G 4.5” Stone Platinum Granite Turbo Blade SIS-SPLTB5G 5” Stone Platinum Granite Turbo Blade SIS-SPLTB6G 6” Stone Platinum Granite Turbo Blade SIS-SPLTB7G 7” Stone Platinum Granite Turbo Blade - DKO SIS-SPLTB8G 8” Stone Platinum Granite Turbo Blade - DKO

PRICE $

31.00 35.00 45.00 50.00 70.00 80.00

www.StoneUsa.com

SUPER PREMIUM TURBO BLADES

• The world’s fastest dry blade for any hard granite • Long life, no vibration cutting with reinforced and silent body • Specially unique designed segment for very fast cutting speed • Multiple holes for fast cooling and non-stop work

Alpha Quad

New Cyclone S

• 8mm Rim height • Use with Quad Adaptor for ﬂush cutting applications • Quad Drive Adapter eliminates the typically required lock nut • Use to make clean and efﬁcient 90° corners • Wet or dry cutting

• The new Cyclone "Arrow" design is the next generation of diamond blades

53.45 67.26 79.44 84.72 103.15 156.20 175.68

• The Arrow rim feature allows this blade to cut faster and cleaner than traditional turbo blades

SIZE

PART #

5” 5.5” 6”

C-TBA50 C-TBA55 C-TBA60

DESCRIPTION

PRICE $

5/8” - 7/8” - 22mm 5/8” - 7/8” - 22mm 5/8” - 7/8” - 22mm

39.00 42.00 47.00

Alpha Plus

Pearl P5

• Perfect for granite and engineered stone and hard materials • 8mm tall diamond layer for a long life • Use on angle grinders, wet stone cutters & demolition saws • Wet or dry cutting

• 8mm rim height • High diamond concentration for extra long life • Turbo rim for fast cut and minimal chipping • Wet or dry cutting

PRICE $ 51.32 56.39 64.99 77.02 81.79 98.88 150.25 172.05 172.05 216.17 216.17

20mm - 5/8” 7/8” - 5/8” 7/8” - 5/8” 20mm - 4 holes 7/8” - 5/8” 20mm - 4 holes 5/8” + DKO 20mm - 4 holes

PREMIUM TURBO BLADES Stone Plus

• Turbo segments for fast cutting and minimal chipping • Extra long life and high diamond concentration

Cyclone

Side Segment Turbo Blade

• Side segments are inlaid within the core for safe cutting • Side segments prevent blade from binding within the stone • Thick solid steel core eliminates any possibility of warping and ensures straight cuts SIZE

PART #

DESCRIPTION

PRICE $

5” 6” 7”

C-SSTB5P C-SSTB6P C-SSTB7P

Arbor 7/8" - 5/8" - 22mm Arbor 7/8" - 5/8" - 22mm Arbor 7/8" - 5/8" - 22mm + DKO

39.00 53.00 66.00

Eclipse II

Cyclone

Ideal for granite, engineered stone, natural stones and general purpose use on common building materials such as masonry, concrete, brick, block, slate, and tile

• Laboratory tested to cut 119 linear feet of 3cm absolute black granite • 7" and 8" blades now have a thicker core which make for straighter cuts

Super Dry Blade

SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7” 7” 8”

C-TBS40 C-TBS45 C-TBS50 C-TBS60 C-TBS70 C-TBS7Q C-TBS80

7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 5/8” + DKO 7/8”-22mm-5/8” 5/8” + DKO

26.50 31.50 34.50 47.50 65.50 75.50 75.50

WAVED TURBO BLADES Pearl P5

Super Dry Blade

Pearl P4

Super Dry Blade

STANDARD TURBO BLADES Samurai Turbo Blades With Side Protection

Hurricane

Granite Turbo Blades

Turbo Blade

• Great performance with an unbeatable price • Excellent cutting and life

• Hurricane Turbo Blades are formulated for quick cutting performance at an economical price • 8mm Rim height • Wet or dry cutting SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7” 7” 8”

C-HTB40 C-HTB45 C-HTB50 C-HTB60 C-HTB70 C-HTB7Q C-HTB80

7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 7/8”-22mm-5/8” w/ 4 holes 5/8” + DKO 7/8”-22mm-5/8” 5/8” + DKO

24.50 25.50 30.50 39.00 51.50 51.50 65.50

7/8”-20mm-5/8” w/ 4 holes 7/8”-20mm-5/8” w/ 4 holes 7/8”-20mm-5/8” w/ 4 holes 7/8”-20mm-5/8” w/ 4 holes 7/8”-20mm-5/8” w/ 4 holes 7/8”-20mm-5/8” w/ 4 holes

Pearl P3

Storm

• 8mm Rim height • Long life • Turbo rim for fast cut and minimal chipping • Wet or dry cutting

• New bond offers even faster cutting and an extended life • 6mm Rim Height • Wet or dry cutting

Turbo Blade

• Extra side segments allow faster and more aggressive cutting • Ideal for use on rough conditions

Turbo Blade

SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7” 7” 8”

C-STB40I C-STB45I C-STB50I C-STB60I C-STB70I C-STB7Q C-STB80

7/8”-22mm w/ 4 holes 7/8”-22mm w/ 4 holes 7/8”-22mm w/ 4 holes 7/8”-22mm w/ 4 holes 7/8” + DKO 7/8”-22mm 7/8” + DKO

19.50 24.50 27.50 34.00 36.00 37.50 46.50

ELECTROPLATED BLADES FOR MARBLE

• Designed to cut materials such as softer marbles, travertines, soapstones, and alabaster without the chipping and cracking commonly associated with the dry cutting process• Chip-free cutting even on toughest marble • Fits most popular high-speed angle grinders and stone cutters SIZE

PART #

4” 4.5” 5” 6” 7”

A-DL04A+ A-DL05A+ A-DL05S A-DL06A+ A-DL07A+

Electroplated Blades

DESCRIPTION

PRICE $

20mm-5/8" 20mm 7/8" 7/8", 5/8" + DKO 5/8" + DKO

63.14 70.43 84.85 99.25 115.05

Electroplated Blades With side protection

Fast cutting, no chipping and clean cut on medium to softer grades of marble, limestone, travertine and other soft stones

Super fast cutting, no chipping and clean cut on medium to softer grades of marble, limestone, travertine and other soft stones

Cyclone

Super Cyclone

• Cyclone marble blades are specially designed to cut all types of marble faster and cleaner than anything on the market today at a mid-range price • For wet or dry cutting of marble & other softer stones

• Smooth cutting electroplated marble blades with side protection • For wet or dry cutting of marble & other softer stones

SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7”

C-EMBL40 C-EMBL45 C-EMBL50 C-EMBL60 C-EMBL70

7/8”-22mm-5/8” 7/8”-22mm-5/8” 7/8”-22mm-5/8” 7/8”-22mm-5/8” 5/8” + DKO

32.00 33.50 37.50 60.50 65.50

C-EMBSL40 C-EMBSL45 C-EMBSL50 C-EMBSL60 C-EMBSL70 C-EMBSL7Q

ELECTROPLATED BLADES FOR MARBLE Pearl P5

Pearl P4

• High diamond concentration for extra long life • Advanced electroplated bond for a fast, clean chip-free cut • Ideal for cutting marble and travertine • For wet or dry cutting of marble & other softer stone

• Extra long life • Advanced electroplated bond for a fast, clean chip-free cut • Ideal for cutting marble and travertine • For wet or dry cutting of marble & other softer stone

MARBLE BLADES Alpha Numero Uno

Pearl P3

• For cutting granite, marble, and engineered stone • Wet or dry cutting. The 4-1/2” and 5” blade can be used either wet or dry. However, the larger Numero Uno blades must be used WET at all times

• Long life • Thin turbo rim and core for a fast, clean chip-free cut • Ideal for cutting marble and tile • Wet or dry cutting

CONTOUR BLADES FOR PORCELAIN Contour Blade For Porcelain

Curve Cutting on Porcelain, Crystallized Glass and Ultra Compact Surfaces

SIZE

PART #

DESCRIPTION

PRICE $

5”

A-CCP005

7/8”

149.50

CONTOUR BLADES FOR GRANITE Stone Plus Contour Blade

With Vacuum Brazed Side Protection • Wide turbo segments • Sintered and vacuum brazed protection • Smooth, no friction and fast rounding cuts

Contour Cutting Blade

Turbo Contour Blades for Granite

• Contour blade for granite/engineered stone • Diamonds on the convex side for high performance cutting of sink holes & other curved applications • Wet or dry cutting

High quality turbo segments and side protection allow for a fast and smooth cut

Pearl P5

Cyclone

• High diamond concentration for extra long life • Designed with undercut core protection • Cuts circles and ovals without time consuming overcuts • Wet or dry cutting

• Work faster when making sink cut-outs • Cyclone’s turbo design cuts with a smoother, cleaner cut than a segmented blade • Diamond slots on the outside ensure easy and uninterrupted passage through the stone • Wet or dry cutting SIZE

PART #

DESCRIPTION

PRICE $

5” 6”

C-CTB52 C-CTB62

7/8”-22mm- 5/8” 7/8”-22mm-5/8”

114.50 139.50

Hurricane

Stone Contour Cutting Blade

• Quick cutting performance with an excellent value • Turbo Rim design • Two-sided drop segment for core protection

The best value blade on the market for sink cut-outs or other curved cutting.

SIZE

PART #

DESCRIPTION

PRICE $

5” 6”

C-CTBH5 C-CTBH6

7/8”-5/8” 7/8”-5/8”

84.50 104.50

CONTOUR BLADES FOR MARBLE Electroplated Contour Blade

• Smooth and chip-free cut • Side diamond protection for faster and smooth cutting

Electroplated Contour Blade

• The Alpha contour blade for marble is designed speciﬁcally for cutting marble and limestone sink holes and other curve cutting applications • Cuts clean curves with a wider kerf • Wet or dry cutting

TILE BLADES

• Extremely smooth and chip-free cutting • High diamond concentration and “J” cooling slots for long life • Cuts granite, marble, porcelain and ceramic tile

Cyclone Electroplated Contour Blade

• Designed for curved cutting applications in marble • Electroplated core protection • Wet or dry cutting

SIZE

PART #

DESCRIPTION

PRICE $

5”

C-CTEB5

5/8”

109.50

TILE BLADES Stone Continuous-Rim

Pearl 2 Pro V Tile Blade

• Economical price with professional results • Smooth and chip-free cuts • Excellent results for mitering edges • Use Dry or Wet on Granite and marble

• 10mm Rim height • Economical price • Continuous rim for clean chip-free cutting • 4” and 4.5” Diameter blades: wet or dry cutting • 7” - 10” Diameter blades: wet cutting only

PEA-PV004CT PEA-PV045CT PEA-PV007CT PEA-PV008CT PEA-PV010CT

Cyclone Continuous-Rim

Alpha Sonic Blades For All Tiles

• Most versatile blade that cuts granite, marble, porcelain, and ceramic tile • Also used widely in counter top fabrication for granite, engineered stone and marble • Ideal for cleaning seams and preparing material for miter joints • Slotted for more aggressive cutting with minimal chipping (Except 10")

• Extremely smooth, chip-free cutting • Great for cutting marble and ceramic tiles quickly and efﬁciently with tub or tile saws • For wet use only

C-SR040 C-SR045 C-SR050 C-SR060 C-SR070 C-SR080 C-SR100 C-SR120 C-SR140

PORCELAIN BLADES Stone Mesh Thin Turbo • Great for hard porcelain, tile, ceramic and granite tiles • Thin and strong matrix segments for fast and sharp cuts with less wobbling and silent effect SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7” 7” 10” 12” 14” 16”

SIS-S4PT SIS-S45PT SIS-S5PT SIS-S6PT SIS-S7PT SIS-S7PT-DKO SIS-S10PT-1 SIS-S12PT SIS-S14PT SIS-S16PT

5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8" + DKO 1"-7/8"-5/8" 60mm 50/60mm 50/60mm

26.50 30.00 34.00 53.00 64.50 64.50 65.50 96.00 153.00 239.00

SIZE

PART #

4” 4.5” 6” 7” 8” 10” 12” 14”

A-TS04AL A-TS05AL A-TS06AL A-TS07AL A-TS08AL A-TS10AL A-TS12AL A-TS14AL

DESCRIPTION

PRICE $

Sonic - 20mm-5/8” Sonic - 7/8", 20mm Sonic - 5/8” Sonic - 5/8” Sonic - 5/8” Sonic - 5/8” Sonic - 1” Sonic - 1”

24.32 27.37 29.65 36.90 41.37 55.42 85.14 128.13

PORCELAIN BLADES Cyclone Mesh Thin Turbo

Pearl P4 Mesh Thin Turbo

• Great for hard porcelain, tile, ceramic and granite tiles • Thin and strong matrix segments for fast and sharp cuts with less wobbling and silent effect

• Special turbo-mesh rim design and thin core for fast cutting with minimal chipping • Blade cuts cool with increased life and cutting speed • Wet or dry cutting • 10mm rim height

SIZE

PART #

DESCRIPTION

PRICE $

4” 4.5” 5” 6” 7” 7” 10” 12” 14” 16”

C-TBP40 C-TBP45 C-TBP50 C-TBP60 C-TBP70 C-TBP7Q C-TBP100 C-TBP1260 C-TBP1460 C-TBP1660

5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8"-22mm-7/8" 5/8" + DKO 1"-7/8"-5/8" 60mm 50/60mm 50/60mm

26.50 30.00 34.00 53.00 64.50 64.50 65.50 96.00 153.00 239.00

Alpha Porcellana

Pearl P5

• 10mm Rim height • Continuous Rim • Designed for dense granite, marble and porcelain • Wet cutting only

• 9mm Rim height • High diamond concentration for extra long life • Continuous Rim for clean and chip-free cut • 4” diameter blade: Wet and dry cutting • 7” - 10” Diameter blades: wet cutting only

Pearl P2 Pro V

Pearl P4

• 8mm Rim height • Economical price • Designed with slots for a fast, cool, and chip-free cut • 4 & 4 1/2” Diameter blades: wet or dry cutting • 7” - 10” Diameter blades: wet cutting only

GLASS BLADES Alpha Vetro

Cyclone

• Premium wet cutting blade for glass • With a continuous diamond rim and bond hardness • For clean, smooth cuts with minimal chipping • Wet cutting only

• Diamond bond speciﬁcally made for glass tile • For clean and precise cuts in glass • Will not chip the bottom of the glass tile • Wet cutting only

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

4-3/8” 7” 8” 10”

A-WG0438 A-WG0700 A-WG0800 A-WG1000

7/8”-20mm 5/8” 5/8” 5/8”

31.83 67.55 80.28 93.27

4.5” 7” 10”

C-CRGB045 C-CRGB07 C-CRGB10

5/8’’-7/8”-22mm 5/8”+ DKO 1’’-7/8’’-5/8”

29.00 69.50 85.50

Pearl P2 Pro V

Pearl P5

• 7mm rim height • Economical price • Engineered with an advanced bond • Wet cutting

• 7mm rim height • High diamond concentration for extra long life • Engineered with an advanced bond • Wet cutting

Glass Blade

TUCK POINT / RODDING BLADES Stone Rodding Blades

Pearl P2

• Very aggressive and long lasting • Clean cuts • 6mm thick diamond rim

• 10mm thick diamond rim • Engineered for repairing grout • Designed to clean mortar joints quickly and easily • Wet or dry cutting

Tuck Point Blade

SIZE 4” 5” 7”

32.00 40.00 80.00

TUCK POINT / RODDING BLADES Tuck Point Wheels

Hot Rod

• Very aggressive and long lasting, these dry cutting wheels ﬁt 4 and 7 inch grinders • Masons and brick re-pointers will ﬁnd this wheel extremely useful for working mortar and soft stone • 6mm Thick diamond rim • 13,700 Max. RPM • Wet or dry cutting

• Ideal for channel cutting when using steel reinforcement rods, quick cutting diamond grit and matrix suited for all granites • Arbor: 7/8” - 20mm • 14,500 Max. RPM • Wet or dry cutting

PART # A-TP04SP

SIZE

PART #

DESCRIPTION

PRICE $

3” 3” 3” 3” 3” 3” 4” 4”

A-HT03A+ A-HQ03A+ A-HR03A+ A-HW03A+ A-HS03A+ A-HM03A+ A-HT04A+ A-HR04A+

7/8", 20mm1/8" - Granite 7/8", 20mm3/16" - Granite 7/8", 20mm1/4" - Granite 7/8"3/8" Threaded - Granite 7/8", 20mm1/8" - Marble 7/8", 20mm1/4" - Marble 7/8", 20mm1/8" - Granite 7/8", 20mm1/4" - Granite

94.96 94.96 94.96 103.13 94.96 94.96 100.90 100.90

SPECIALTY BLADES Multi-Cutter Turbo Blade • Dual Side Protection • Tear drop holes for cooling allows for long life • Quad hole adaptor included

Alpha Trim Master

Alpha Knock-Out

• Dry cutting blade for miter saws • Wet or dry cutting

• Designed for rail saws • Excellent choice for the Trac-Star 2000 saw • Wet or dry cutting

SPECIALTY BLADES Alpha Vortex

Alpha Katana

Dry Cut Blades

Dry Cutting Blades

• Dry or wet cutting applications • The dual side protection segments improve the strength and durability, while creating a ﬂush cutting blade superior to any other available in the market

• Hybrid Dry Saw Blade for all tiles • Designed for dry cutting granite, marble, porcelain and engineered stone • Wet or dry cutting

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

4” 5” 5”

A-FCD40AH A-FCD50AH A-FCM50AH

20mm-w/ 4 holes - Granite 20mm-w/ 4 holes - Granite 20mm-w/ 4 holes - Marble

89.16 108.61 149.82

4” 4.5” 5” 6”

A-DPT100 A-DPT115 A-DPT125 A-DPT150

DESCRIPTION

PRICE $

Dry - Katana - 20mm-5/8” Dry - Katana - 20mm-7/8” Dry - Katana - 7/8” Dry - Katana - 7/8", 5/8"

40.51 46.16 52.49 63.25

SEGMENTED BLADES Granite Segmented Blade

Pearl P2 Pro-V Segmented Blades

• 10mm segments • Long cutting life and smooth cut

• .080 Thickness • 10mm Rim height • Wet or dry cutting

Stone Stainless Steel Quad Adapter

PORTABLE RAIL SAW BLADES Archon Blades

J Slotted Blade Blue

For Blue Ripper Machines

These blades have arrayed diamonds in each segment with ﬁne grit outside and coarse grit inside. The advantage of this technology is that the outer edge wears ﬂat or even concave, this keeps the blades tracking true so they don't curve cuts as they wear like traditional blades can. SIZE 8” 14”

PART # OME-046-326 OME-079-049

The 14 inch J Slotted Blade has a soft bond, aggressive diamond size, thick rigid core, and is a great general purpose granite cutting blade.

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

7/8” - 5/8” + DKO 20mm - 50/60mm

79.00 199.00

14”

OME-847-799

60mm arbor hole 7mm high J slots

179.00

PORTABLE RAIL SAW BLADES Alpha Vetro • Premium wet cutting blade for glass • With a continuous diamond rim and bond hardness • For clean, smooth cuts with minimal chipping • Wet cutting only SIZE 10”

PART #

DESCRIPTION

PRICE $

A-WG1001 1.6mm Thick / 1", 5/8" Arbor Blade

93.27

Cyclone Low Horsepower

Blue Gator

Silent Core Blades

• The Cyclone LHP Blade will cut more slabs than any other blade for a Low Horsepower saw • Designed for the Blue Ripper, Achilles TSA or any portable track saw device • Constructed with a silent core to reduce noise pollution in the work place • Special soft bond cuts super hard material with ease • For Granite and Engineered Stone

• Premium diamonds, sandwich core, sandwich segments • Fast cutting, cost-effective, longlasting, smooth cutting, specially designed for rail saw • For marble, porcelain, granite

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

14”

DDT-DUBSD060

50/60mm

195.00

14” 16”

C-SCLH14 C-SCLH16

50/60mm 50/60mm

194.50 387.00

BRIDGE SAW BLADES

NEW Stone Plus Silent Arrayed 7 Layer Blade • Super Premium quality • Layered 25mm Segment Design for extra long life • Quiet and clean cut • For Granite and Engineered Stone SIZE

PART #

DESCRIPTION

PRICE $

14” 16” 18”

SIS-SP14-25G SIS-SP16-25G SIS-SP18-25G

25mm / 50/60mm 25mm / 50/60mm 25mm / 50/60mm

364.00 436.00 559.00

BRIDGE SAW BLADES Stone Universe

Stone Plus

• Premium quality • Soft bond segment for hard granite and engineered stone • Super quiet and durable • Consistent cutting performance

• Super quiet and durable this blade provides optimum and consistent cutting performance • The Stone Plus bridge saw blades boast a 20 mm titanium segment matrix which provides a smooth, chip-free cutting for granite • For Granite and Engineered Stone

Granite Bridge Saw Silent Blades

Turbo Honey Comb Type Segmentes

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

14” 16” 18”

SIS-U14-22G SIS-U16-22G SIS-U18-22G

22mm / 50/60mm 22mm / 50/60mm 22mm / 50/60mm

315.00 365.00 439.00

14” 16” 18”

SIS-SP14-20G SIS-SP16-20G SIS-SP18-20G

20mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm

300.00 357.00 430.00

Granite Bridge Saw Silent Blades

Pearl P5 Shadow Bridge Saw Blade

• 25mm tall segments • Pattern diamond technology • Very fast cutting • Consistent cutting performance • For Granite and Engineered Stone

SIZE

PART #

DESCRIPTION

PRICE $

10” 12” 12” 14” 14” 16” 18” 20”

SIS-S10-10G1 SIS-S12-10G SIS-S12-15G SIS-S14-10G SIS-S14-20G SIS-S16-20G SIS-S18-20G SIS-S20-20G

10mm / 50/1” 10mm / 50/60mm 15mm / 50/60mm 10mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm

138.00 155.00 219.00 175.00 272.00 336.00 429.00 588.00

Choose the correct diameter Bridge Saw Blade based on the RPM on your saw Using the incorrect diameter blade can cause glazing when cutting marble. You need to increase the diameter of your blade one size up.

SIZE

PART #

DESCRIPTION

PRICE $

14” 16” 18”

PEA-SLN1425SHW PEA-SLN1625SHW PEA-SLN1825SHW

25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm

319.50 379.50 459.50

DIAMETER

MARBLE RPM

GRANITE RPM

12"

2,200 - 2,500

1,800 - 2,000

14"

1,800 - 2,000

1,600 - 1,800

16"

1,600 - 1,800

1,400 - 1,500

18"

1,400 - 1,500

1,200 - 1,300

20"

1,200 - 1,300

1.100 - 1.200

24"

1.000 - 1.100

900 - 1,000

Blade Size X RPM

CUTTING

• Revolutionary segment design allows for fast cutting and longer life • Best selling blade in our line • For Granite and Engineered Stone

Cyclone S Silent Core Diamond Arrayed Diamax has raised the standard on bridge saw blade technology. The new bond will extend the life of the blade without slowing down the cutting speed or increasing cost. There is no better return on investment than the new Cyclone S. Get yours today!

• Engineered with arrayed diamond technology • 26 mm segments provide long cutting life • For granite and engineered stone

SIZE

PART #

DESCRIPTION

PRICE $

14”

C-SCDA1420S 20mm-50/60mm

345.00

14”

C-SCDA1426S 26mm-50/60mm

365.00

16”

C-SCDA1620S 20mm-50/60mm

375.00

16”

C-SCDA1626S 26mm-50/60mm

419.00

18”

C-SCDA1826S 26mm-50/60mm

430.00

THE #1 BRAND IN STONE

BRIDGE SAW BLADES Zenesis II

Cyclone High Speed Silent Core Blades

Silent Core Blades

• 9 layers of Diamond Arrayed Technology makes this blade superior to other similar technology • Cyclone High Speed layered technology gives you 20%-40% more life than other blades • Feed rate 10ft-17ft a minute • Segments are pressure tested to ensure solid welding • Consistent cuts on granite, marble, and other quartz materials • For Granite and Engineered Stone

• Engineered with world's most advanced patterned diamond technology for granite & engineered stone • 25mm tall segment height, 50/60mm arbor, sandwich silent core

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18” 20”

ZEN-B212 ZEN-B214 ZEN-B216 ZEN-B218 ZEN-B220

25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm

295.00 343.00 412.00 518.00 649.00

12” 14” 14” 16” 16” 18”

C-SCDA1220 C-SCDA1420 C-SCDA1426 C-SCDA1620 C-SCDA1626 C-SCDA1826

20mm / 50/60mm 20mm / 50/60mm 26mm / 50/60mm 20mm / 50/60mm 26mm / 50/60mm 26mm / 50/60mm

311.00 315.00 324.00 365.00 379.00 438.00

Zenesis III

NEW Cyclone QZT

• Engineered with world's most advanced patterned diamond technology for granite & engineered stone • 25mm tall segment height, 50/60mm arbor, Sandwich Silent Core • For Granite and Engineered Stone

• Longest lasting blade for Quartzite • Segment designed for fast cutting on the hardest material chip-free • For Granite and Engineered Stone

Silent Core Blades

SIZE

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18” 20”

ZEN-Z312 ZEN-Z314 ZEN-Z316 ZEN-Z318 ZEN-Z320

25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm

295.00 343.00 412.00 518.00 649.00

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18”

C-SCQB1220 C-SCQB1420 C-SCQB1620 C-SCQB1820

20mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm 20mm / 50/60mm

350.00 390.00 430.00 496.00

Zenesis Black 3

Pearl P5 Reactor Pro II

• Engineered with world's most advanced patterned diamond technology for granite & engineered stone 25mm tall segment height, 50/60mm arbor, Sandwich Silent Core • Designed for super fast chip free cutting and long life • For Granite and Engineered Stone

• Engineered with ADM • Advance Diamond Matrix • Diamond pattern and layering technology • 26mm segments • High diamond concentration for extra long life - 50/60mm Arbor • For Granite and Engineered Stone

Silent Core Blades

CUTTING

SIZE

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18” 20”

ZEN-B312 ZEN-B314 ZEN-B316 ZEN-B318 ZEN-B320

25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm

318.00 368.00 429.00 537.00 679.00

SIZE

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18”

PEA-SLN1225PRO2 PEA-SLN1425PRO2 PEA-SLN1625PRO2 PEA-SLN1825PRO2

26mm / 50-60mm 26mm / 50-60mm 26mm / 50-60mm 26mm / 50-60mm

255.50 323.50 384.50 428.50

BRIDGE SAW BLADES Pearl P5 Reactor Pro

Pearl P4

• Engineered with ADM • Advance Diamond Matrix • Diamond pattern and layering technology • 25mm segments • High diamond concentration for extra long life • For Granite and Engineered Stone

• Engineered with ADM • Advance Diamond Matrix • Diamond pattern and layering technology • 18mm segments • Extra long life • For Granite and Engineered Stone

Silent Core Blades

SIZE

PART #

DESCRIPTION

PRICE $

14” 16” 18”

PEA-SLN1425PRO PEA-SLN1625PRO PEA-SLN1825PRO

25mm / 50-60mm 25mm / 50-60mm 25mm / 50-60mm

319.50 381.50 456.50

SIZE

PART #

DESCRIPTION

PRICE $

12” 14” 16” 18”

PEA-SLN12SPFR PEA-SLN14SPFR PEA-SLN16SPFR PEA-SLN18SPFR

18mm / 50-60mm 18mm / 50-60mm 18mm / 50-60mm 18mm / 50-60mm

234.50 266.00 327.50 358.50

Alpha Silencer III 5 styles of high quality, large diameter silent core blades. The Alpha Silencer III is a technologically advanced blade that produces excellent cuts while achieving superior cost performance with reduced noise levels. The unique core is made of 2 solid sheets of hardened steel with a thin copper sheet laminated in between them. This special construction dissipates the usually high noise levels common to this application.

SIZE 14” 16” 18”

GENERAL PURPOSE GRANITE PART # DESCRIPTION A-SLW1439G 50/60mm A-SLW1639G 50/60mm A-SLW1839G 50/60mm

PRICE $ 420.11 465.67 488.59

SIZE 14” 16” 18”

HARD GRANITE DESCRIPTION PART # A-SLW1437G 50/60mm A-SLW1637G 50/60mm A-SLW1837G 50/60mm

PRICE $ 428.06 453.50 611.40

SIZE 14” 16” 18”

GENERAL PURPOSE SOFT GRANITE DESCRIPTION PART # A-SLW1450G 50/60mm A-SLW1650G 50/60mm A-SLW1850G 50/60mm

PRICE $ 408.83 432.86 534.48

ENGINEERED STONE PART # DESCRIPTION 50/60mm A-SLW1273E 50/60mm A-SLW1473E 50/60mm A-SLW1673E 50/60mm A-SLW1873E

PRICE $ 426.25 444.51 493.01 560.69

SIZE 10” 12” 14” 16” 18”

PART # A-SLW1010D A-SLW1210D A-SLW1410D A-SLW1610D A-SLW1810D

DEKTON® DESCRIPTION 50/60mm 50/60mm 50/60mm 50/60mm 50/60mm

PRICE $ 312.12 405.64 448.72 554.60 662.47

SIZE 14” 16” 18”

QUARTZITE® PART # DESCRIPTION 50/60mm A-SLW14KKQ 50/60mm A-SLW16KKQ 50/60mm A-SLW18KKQ

PRICE $ 435.00 540.00 640.00

Silent Core Adapters PART #

PART #

DESCRIPTION

PRICE $

SIS-RA01 SIS-RA02

60mm to 1" 50mm to 1"

5.95 5.95

A-ADP6001 A-ADP6030 A-ADP6035 A-ADP6045 A-ADP6050 A-ADP6125

DESCRIPTION

PRICE $

60mm to 1" 60mm to 30mm 60mm to 35mm 60mm to 45mm 60mm to 50mm 60mm to 1-1/4"

5.49 5.49 5.49 5.49 5.49 5.49

CUTTING

Reducing Arbor Bushing for Circular Saw Blades

SIZE 12” 14” 16” 18”

BRIDGE SAW BLADES FOR MARBLE Blue Impulse 3

Marble Bridge Saw Silent Blades

• Premium diamonds, sandwich core, sandwich segments, soft bond • Fast cutting, cost-effective, longlasting, smooth cutting

• Fast chip-free cutting. • Ideal for soft cutting materials like marble and travertine

SIZE

PART #

DESCRIPTION

PRICE $

14" 16" 18"

DDT-DUBSD016 DDT-DUBSD028 DDT-DUBSD029

50/60mm 50/60mm 50/60mm

259.00 289.00 335.00

Alpha Silencer III

Cyclone Marble Silent Core Blade • Designed with a speciﬁc marble bond segment. Segments contain a higher concentration of smaller grit diamonds to insure chip-free clean cutting • The silent core feature reduces noise signiﬁcantly • Performs clean and straight miter cuts

• Fast, chip-free cutting • Free re-tipping service for life of the blade • Specialty blade designed for marble

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

16” 18”

A-SLW16S2M A-SLW18S2M

50/60mm 50/60mm

378.58 399.68

14” 16”

C-SCMARB14 C-SCMARB16

10mm, 50/60mm 10mm, 50/60mm

295.00 349.00

BRIDGE SAW BLADES FOR PORCELAIN & CRYSTALLIZED GLASS Alpha Silencer III • Clean cutting • Silent Core

Cyclone Ultra Glass Silent Core Blade

• Designed with a unique cutting rim containing a high concentration of ﬁne diamond grit. This ensures fast and clean cuts. • For use on crystallized glass and porcelain • Performs clean and straight miters cuts

SIZE

PART #

14” 16”

C-SCGB14 C-SCGB16

DESCRIPTION

PRICE $

10mm, 50/60mm 10mm, 50/60mm

379.00 419.00

BRIDGE SAW BLADES FOR CONCRETE Concrete Bridge Saw If you are looking for productivity and versatility, these blades are the right choice.

SAW BLADES FOR MARBLE & CERAMIC TILE Alpha Typhoon

Great for cutting marble and ceramic tiles quickly and efﬁciently with tub or tile saws. Designed for smooth, chip-free cutting, Its heavyduty and well-balanced construction provide a long life.

MILLING WHEELS Stone Milling Wheels

CUTTING

• 1-1/2’’ thick • Designed to mill or plane natural stone and cement products • 50/60mm arbor

PREPARATION STAGE PADS Alpha Ceremica Metal

Alpha Ceramica Vitriﬁed

Flexible Hybrid Pads With Diamonds • Use Wet or Dry • For all concrete, terrazzo, and natural stone • Built to prepare concrete for polishing • Very aggressive, excellent scratch pattern • Good transition from metal bonds to resin bond pads

Speciﬁcally designed to handle the challenging job of removing saw marks and grinding marks in order to prepare the stone for polishing. Ideal for the bullnosed or proﬁled edge, but also works very well on all curved edges.

Cyclone V2

Velcro Grinders • Vacuum Brazed • Extremely aggressive for ﬂat edge prep before wet polishing • Can be used in substitution to silica carbide wheels wet or dry • Minimizes dust in shops • Lightweight and easy to use • Velcro backed for use with 4" backer pad

C-BVG430 C-BVG450 C-BVG4100

Copper Grinding Pads • Use Wet or Dry • For concrete, terrazzo, and natural stones • Flexible polishing pads that are very durable and provide top performance for smooth ﬁnish

SIZE

PART #

DESCRIPTION

PRICE $

3” 3” 3” 3” 3”

SC-3C0030 SC-3C0050 SC-3C0100 SC-3C0200 SC-3C0400

30 Grit 50 Grit 100 Grit 200 Grit 400 Grit

19.95 19.95 19.95 19.95 19.95

4” 4” 4” 4” 4” 4” 4” 4”

SC-4C0030 SC-4C0050 SC-4C0100 SC-4C0200 SC-4C0400 SC-4C0800 SC-4C1500 SC-4C3000

30 Grit 50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit

21.95 21.95 21.95 21.95 21.95 21.95 21.95 21.95

A-AIR-300

$344.40

SUPER PREMIUM POLISHING PADS Stone Platinum

Super Premium Polishing Pads for Granite • These pads are made with the highest quality standards in the market • Superior abrasive formulation for the BEST polish • Long lasting with excellent gloss

Ceramica Resin

Ultimate Polishing Pads for Granite

For professional, fast polishing of granite. High quality industrial diamonds and bond materials ensure the best possible ﬁnish on polished stone.

SIZE 3” 3” 3” 3” 3” 3” 3” 3”

PART #

DESCRIPTION PRICE $

A-GP30150R 150 Grit A-GP30300R 300 Grit A-GP30500R 500 Grit A-GP31000R 1000 Grit A-GP32000R 2000 Grit 3000 Grit A-GP33000R A-GP3BLACK Final Buff Black A-GP3WHITE Final Buff White

32.09 32.09 32.09 32.09 32.09 32.09 63.07 63.07

Cyclone Ultra

Premium Polishing Pads • With its new resin and heavier diamond formula, the Ultra System delivers longer life & minimizes polishing time • Used to polish all engineered and natural stone materials with minimal resin bleeding

C-SPD40050 C-SPD40100 C-SPD40200 C-SPD40400 C-SPD40800 C-SPD41500 C-SPD43000 C-SPD4BB C-SPD4WB

SIZE 4” 4” 4” 4” 4” 4” 4” 4”

PART #

DESCRIPTION PRICE $

A-GP40150R 150 Grit A-GP40300R 300 Grit A-GP40500R 500 Grit A-GP41000R 1000 Grit A-GP42000R 2000 Grit 3000 Grit A-GP43000R A-GP4BLACK Final Buff Black A-GP4WHITE Final Buff White

43.10 43.10 43.10 43.10 43.10 43.10 77.80 77.80

SIZE 5” 5” 5” 5” 5” 5” 5” 5”

PART #

DESCRIPTION PRICE $

A-GP50150R 150 Grit 62.13 A-GP50300R 300 Grit 62.13 A-GP50500R 500 Grit 62.13 A-GP51000R 1000 Grit 62.13 A-GP52000R 2000 Grit 62.13 3000 Grit A-GP53000R 62.13 A-GP5BLACK Final Buff Black 100.72 A-GP5WHITE Final Buff White 100.72

Ceramica Edge

Flexible Diamond Edge Polishing Discs

All-resin bond polishing system polishes granite edges fast and produces a high-quality polish that matches the edge to the slab surface.

PREMIUM WET POLISHING PADS Stone Plus

Cyclone Wet Polishing Pads

• Superior polishing results • Extra long life • Flexible design

• Premium wet polishing disk for granite, marble and engineered stone • Durable and high-performing against the top brands in the industry • Gains ﬂexibility after continual use • 3mm R Series Tread • 4000 MAX RPM

Wet Polishing Pads

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4” 4”

C-PDR450 C-PDR4100 C-PDR4200 C-PDR4400 C-PDR4800 C-PDR41500 C-PDR43000 C-PDR4BW C-PDR4BB

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit White Buff Black Buff

12.50 12.50 12.50 12.50 12.50 12.50 12.50 18.50 18.50

STANDARD WET POLISHING PADS Stone Wet Polishing Pads • Professional results at an attainable price • Fast polishing and good life

8.50 8.50

Hurricane

Wet Polishing Pads

10.75 10.75

18.00 18.00

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4” 4”

C-PDRE450 C-PDRE4100 C-PDRE4200 C-PDRE4400 C-PDRE4800 C-PDRE41500 C-PDRE43000 C-PDRE4BW C-PDRE4BB

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit White Buff Black Buff

11.00 11.00 11.00 11.00 11.00 11.00 11.00 16.50 16.50

CONVEX POLISHING DISKS Great for polishing hard to reach areas, sink holes, ogee edges and odd shapes.

Stone Convex Polishing Disks

ENGINEERED STONE POLISHING SYSTEM Stone Engineered Stone Polishing System

16.95 16.95 16.95 16.95 16.95 16.95 16.95

Cyclone Engineered Stone

Hurricane Engineered Stone

White Resin Polishing System

• New whiter resin formula throughout all grits • Larger tread pattern provides a longer lifespan • For use on natural stone and engineered Stone

• Outperforms other industry brands at the same price point • For use on natural stone and engineered stone

SIZE

DESCRIPTION

PRICE $

SIZE

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4”

C-ESWR40050 C-ESWR40100 C-ESWR40200 C-ESWR40400 C-ESWR40800 C-ESWR41500 C-ESWR43000

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit

17.95 17.95 17.95 17.95 17.95 17.95 17.95

4” 4” 4” 4” 4” 4” 4”

C-ESHWP40050 C-ESHWP40100 C-ESHWP40200 C-ESHWP40400 C-ESHWP40800 C-ESHWP41500 C-ESHWP43000

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit

15.95 15.95 15.95 15.95 15.95 15.95 15.95

3-STEP WET POLISHING SYSTEM Ceramica Trepasso Polishing System This new 3-disc polishing system, plus 1 coarser surface prep grit, will polish all materials and provide the high-quality results expected from Alpha®. SIZE 4” 4” 4” 4”

PART # A-TPR4000 A-TPR4001 A-TPR4002 A-TPR4003

DESCRIPTION

PRICE $

Pos 0 Pos 1 Pos 2 Pos 3

33.00 33.00 33.00 33.00

Pos 0

Pos 1

Pos 2

Pos 3

3-STEP WET POLISHING SYSTEM Stone 3-Step Polishing Pads • Cuts polishing time by 50% • Extremely fast • Ultra ﬂexible SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4”

SIS-43STEP-1 SIS-43STEP-2 SIS-43STEP-3

Pos 1 Pos 2 Pos 3

31.00 31.00 31.00

Cyclone Trifecto 3-Step Polishing Pads

Hurricane 3-Step Polishing Pads

• Reduces polishing time by 50% • Use wet or dry, best results when used wet. • For polishing granite, engineered stone and other natural stone surfaces

An extremely ﬂexible 3-step polishing system designed for polishing granite as well as concrete, with an optional position 0 available which extends the life of the primary pads and deepens the polish

SIZE

DESCRIPTION

PRICE $

4” 4” 4”

C-P3D41 C-P3D42 C-P3D43

Pos 1 Pos 2 Pos 3

33.50 33.50 33.50

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4”

C-PD4F40 C-PD4F41 C-PD4F42 C-PD4F43

Pos 0 Pos 1 Pos 2 Pos 3

24.50 24.50 24.50 24.50

NEW Cyclone Engineered 3-step

Hurricane Engineered 3-step

• Light-colored resin allows for polishing of lighter colored stones without bleeding • Unique diamond matrix enables you to polish in three steps • Increased ﬂexibility for tight corners & contoured edges • Works great on engineered stone & natural stone

• Provides all the great features of the Cyclone version at an economical price level • Outperforms other industry brands at the same price point level • More forgiving when polishing engineered stone with minimal water • For use on natural stone and engineered stone

Polishing System

White Resin Polishing System

SIZE 4” 4” 4”

DESCRIPTION

PRICE $

SIZE

DESCRIPTION

PRICE $

Position 1 Position 2 Position 3

33.00 33.00 33.00

4” 4” 4”

C-ESHWP401 C-ESHWP402 C-ESHWP403

Position 1 Position 2 Position 3

22.00 22.00 22.00

C-ESWP401 C-ESWP402 C-ESWP403

TEXTURED FINISH PADS Alpha Ceramica TF Textured Finish Position 0

Position 1

Position 3

Position 2

SIZE

PART #

DESCRIPTION

PRICE $

0 1 2 3

A-TFR4000 A-TFR4001 A-TFR4002 A-TFR4003

Pos 0 Pos 1 Pos 2 Pos 3

31.65 31.65 31.65 31.65

• Create textured finishes on engineered stone and quartz surfaces • Flexible disc reaches tight corners comfortably

SUPER PREMIUM DRY POLISHING PADS Alpha Ceramica Dry • The best dry resin pad for all natural stones and cement-based composites • Superior quality results and longer life then typical dry resin pads

PREMIUM DRY POLISHING PADS Cyclone Dryﬂex

Cyclone Dryﬂex II

• Extremely ﬂexible design provides a fantastic ﬁnish • Polish granite wet or dry, engineered stone wet only

• Provides the same degree of polish as the original Dry-Flex • Super flexible design • Polish granite wet or dry, engineered stone wet only

4" Dry Polishing Pads

C-PDH460B C-PDH4100B C-PDH4200B C-PDH4400B C-PDH4800B C-PDH41500B C-PDH43000B C-PDH44000B C-PDH45000B

C-PDH460E C-PDH4100E C-PDH4200E C-PDH4400E C-PDH4800E C-PDH41500E C-PDH43000E C-PDH44000E C-PDH45000E

Stone Plus

Cyclone

Dry Polishing Pads

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4”

C-CDP450 C-CDP4100 C-CDP4200 C-CDP4400 C-CDP4800 C-CDP41500 C-CDP43000 C-CDP4BB

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit Black Buff

20.50 20.50 20.50 20.50 20.50 20.50 20.50 26.00

31.95 31.95 31.95 31.95 31.95 31.95 31.95 31.95 31.95

STANDARD DRY POLISHING PADS Mako

Hurricane

• Best value with the shine you need to get the job done • Perfect for installers or in the shop

Specially formulated adhesive keeps the pad together even under high heat

Dry Polishing Pads

SIS-MAKO4D0050 SIS-MAKO4D0100 SIS-MAKO4D0200 SIS-MAKO4D0400 SIS-MAKO4D0800 SIS-MAKO4D1500 SIS-MAKO4D3000 SIS-MAKO4DBWT SIS-MAKO4DBBK

Dry Polishing Pads

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4”

C-HDP450 C-HDP4100 C-HDP4200 C-HDP4400 C-HDP4800 C-HDP41500 C-HDP43000 C-HDP4BB

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit Black Buff

18.50 18.50 18.50 18.50 18.50 18.50 18.50 18.50

3-STEP DRY POLISHING PADS 3-Step Dry Polishing Pads Premium Polishing Pads

• Excellent polish wet or dry on granite • Reduces polishing time by over 50% • Withstand high temperatures and gives long life

SPECIALTY POLISHING SYSTEMS Alpha PVA MS

Marble Edge Polishing System

PVA QC Style

Marble Edge Polishing System

SPECIALTY POLISHING SYSTEMS Electroplated Flexible Metal Pads

3" Alpha Turboshine

Polishing and Scratch Removal System for Natural and Engineered Stone Countertops

RIGIDS DISCS

FLEXIBLE DISCS

A-DAS35/8PD

Alpha Turboshine for Crystallized Glass Slabs

Polishing and Scratch Removal System for Crystallized Glass

SPECIALTY POLISHING SYSTEMS SL3 3" Floating Turbo Abrasive Wheels

Sl3 Rigid Hook & Loop Backers Fits NSI SL3 Adapter, allows for quick changes between polishing pads. • Quick change Snail Lock system • Available in 3", 4", 5" or 7 diameter • 7" Backer ﬁts hog hair polishing pads PART #

DESCRIPTION

PRICE $

NSI-SL3-R3 3" SL3 Backer NSI-SL3-R4 4" SL3 Backer NSI-SL3-R5 5" SL3 Backer NSI-SL3-R7 7" SL3 Backer NSI-SL3-ADAPT SL3 5/8"-11 Adapter

14.85 18.95 29.95 39.95 49.95

SL3 3" Rigid Turbo Polishing Pads Produced using a proven abrasive formula with a semi-rigid backing to help them run ﬂat for their entire life. Hook & loop attachment with center hub enables the turbo to “ﬂoat”, promoting smoother operation, more relaxed control and provides a shorter learning curve for the new fabricator.

Great for dressing seams (60, 150 and 300 grit)

• Optimized for easy top & edge polishing • Center hub backer keeps the turbo centered • Color-coded for easy identiﬁcation PART # NSI-SL3-F60 NSI-SL3-F150 NSI-SL3-F300 NSI-SL3-F500 NSI-SL3-F1000 NSI-SL3-F2000 NSI-SL3-F3000 NSI-SL3-FR3 NSI-SL3-ADAPT

Use for top polishing or other jobs requiring ﬁne control over stock removal and ﬂatness

• Quick change Snail Lock System

DESCRIPTION

PRICE $

60 Grit Rigid Floating Turbo 150 Grit Rigid Floating Turbo 300 Grit Rigid Floating Turbo 500 Grit Rigid Floating Turbo 1000 Grit Rigid Floating Turbo 2000 Grit Rigid Floating Turbo 3000 Grit Rigid Floating Turbo 3", H&L CTR Hub Backer SL3 5/8"-11 Adapter

27.95 27.95 27.95 27.95 27.95 27.95 27.95 18.95 49.95

PART # NSI-SL3-60 NSI-SL3-150 NSI-SL3-300 NSI-SL3-500 NSI-SL3-1000 NSI-SL3-2000 NSI-SL3-3000 NSI-SL3-ADAPT

DESCRIPTION

PRICE $

60 Grit Turbo Pad 150 Grit Turbo Pad 300 Grit Turbo Pad 500 Grit Turbo Pad 1000 Grit Turbo Pad 2000 Grit Turbo Pad 3000 Grit Turbo Pad SL3 5/8"-11 Adapter

37.95 37.95 37.95 37.95 37.95 37.95 37.95 49.95

Cyclone S Flat Auto Edge Wheels

Cyclone S Hybrid Auto Edge Wheels

• Designed for straight edges • Polish both granite and engineered stone • For use on all multi-head inline polishing machines and back-splash polishing machines • Longest lasting Cyclone wheels

• Designed for straight and bullnose edges • Polish both granite and engineered stone • For use on all multi-head inline polishing machines • Longest lasting Cyclone wheels

PART #

DESCRIPTION PRICE $

C-SCEW50060 5", 60 Grit C-SCEW50120 5", 120 Grit C-SCEW50220 5", 220 Grit C-SCEW50400 5", 400 Grit C-SCEW50800 5", 800 Grit C-SCEW51800 5", 1800 Grit C-SCEW53500 5", 3500 Grit PART #

57.00 57.00 57.00 57.00 57.00 57.00 57.00

DESCRIPTION PRICE $

C-SCEW60060 6", 60 Grit C-SCEW60120 6", 120 Grit C-SCEW60220 6", 220 Grit C-SCEW60400 6", 400 Grit C-SCEW60800 6", 800 Grit C-SCEW61800 6", 1800 Grit C-SCEW63500 6", 3500 Grit

71.50 71.50 71.50 71.50 71.50 71.50 71.50

PART #

DESCRIPTION PRICE $

C-SCHW50060 5", 60 Grit C-SCHW50120 5", 120 Grit C-SCHW50220 5", 220 Grit C-SCHW50400 5", 400 Grit C-SCHW50800 5", 800 Grit C-SCHW51800 5", 1800 Grit C-SCHW53500 5", 3500 Grit PART #

67.00 67.00 67.00 67.00 67.00 67.00 67.00

DESCRIPTION PRICE $

C-SCHW60060 6", 60 Grit C-SCHW60120 6", 120 Grit C-SCHW60220 6", 220 Grit C-SCHW60400 6", 400 Grit C-SCHW60800 6", 800 Grit C-SCHW61800 6", 1800 Grit C-SCHW63500 6", 3500 Grit

96.75 96.75 96.75 96.75 96.75 96.75 96.75

SPECIALTY POLISHING SYSTEMS Alpha Twincur CFP

Hybrid Polishing System for Single-Head Polishers

Cyclone

Hybrid Straight & Profile Edge Wheel Designed to work on all kinds of edge polishing with innovative technology. It is usable not only on profiling edge but also straight edge with excellent polishing results. This will save you time from having to change disc for straight and profiling jobs. Use on granite, marble, and engineered stone.

Alpha Original Twincur GEM

For Straight and Beveled Edge of All Stones For use on all types of stones. Available in a 5” and 6” diameter with a snail lock adapter (SFAT) to ﬁt on most popular edge polishing machines. Produce high-quality straight or beveled edges with less tool inventory by using the Alpha® Twincur GEM. Now available with a Final Polishing wheel called “Tsuya” to achieve the highest possible shine!

SIZE

PART #

DESCRIPTION

PRICE $

5” 5” 5” 5” 5” 5” 5”

A-GEM50100 A-GEM50200 A-GEM50500 A-GEM51000 A-GEM52000 A-GEM53000 A-GEM5TSUYA

100 Blue Resin 200 Yellow Resin 500 Red Resin 1000 Dark Green Resin 2000 Light Green Resin 3000 Brown Resin Tsuya Final Polish Black Resin

89.71 89.71 89.71 89.71 89.71 89.71 75.40

6” 6” 6” 6” 6” 6” 6”

A-GEM60100 A-GEM60200 A-GEM60500 A-GEM61000 A-GEM62000 A-GEM63000 A-GEM6TSUYA

100 Blue Resin 200 Yellow Resin 500 Red Resin 1000 Dark Green Resin 2000 Light Green Resin 3000 Brown Resin Tsuya Final Polish Black Resin

134.65 134.65 134.65 134.65 134.65 134.65 98.47

Alpha TWINCUR GEM-V Straight and Beveled Edge Polishing on Dekton

Hook & Loop backed version of the Twincur GEM, which utilizes the user-friendly Snail Lock Adapter. Twincur GEM-V does not require wrenches to change wheels. Designed to polish straight and beveled edges of granite, engineered stone/quartz surfaces, marble, limestone, concrete, crystallized glass and porcelain slabs, thus simplifying your choice when selecting a polishing system. The Alpha® Twincur GEM-V is recommended by Cosentino® as a Dekton® polishing system for all Dekton® collections throughout global markets. SIZE

PART #

DESCRIPTION

PRICE $

5” 5” 5” 5” 5” 5”

A-GEV50100 A-GEV50200 A-GEM50500 A-GEV51000 A-GEV52000 A-GEV53000

100 Blue Resin 200 Yellow Resin 500 Red Resin 1000 Dark Green Resin 2000 Light Green Resin 3000 Brown Resin

75.40 75.40 75.40 75.40 75.40 75.40

6” 6” 6” 6” 6” 6” 6” 6”

A-GEV5TSUYA A-GEV60100 A-GEV60200 A-GEV60500 A-GEV61000 A-GEV62000 A-GEV63000 A-GEV6TSUYA

Tsuya Final Polish Black Resin 100 Blue Resin 200 Yellow Resin 500 Red Resin 1000 Dark Green Resin 2000 Light Green Resin 3000 Brown Resin Tsuya Final Polish Black Resin

75.40 98.47 98.47 98.47 98.47 98.47 98.47 98.47

SPECIALTY POLISHING SYSTEMS Straight-Edge Diamond Discs C-Frame Machines

• For 4” automatic edging machinery • For polishing straight edges on “C-Frame” machinery • Eliminates workpiece end scratches and delivers a better ﬁnish faster than any other tool • Perfect for edges 3/4” or thicker

176.75 139.00 139.00 114.00 114.00 54.00

Metal Bond Cupwheels C-Frame Machines

• Specifically for automatic edging machines • Snail Lock mounting plate for quick and easy grit changes • Available in x-coarse, coarse, medium, and fine grit sizes • Color coded for easy identification • For marble or granite • Will shape full bullnose profiles and calibrate straight edges • Water diffuser for uniform water dispersion to the work area

Super-Edge 4" Diamond Discs C-Frame Machines 218.50 200.50 189.25 176.75

200.50 176.75 51.75 51.75 51.75

• For new generation, high-production C-frame machinery • Faster than competing polishing systems • Low abrasive and labor production costs • For marble, granite, synthetic and agglomerated stones • Use immediately after any moderately coarse metal bond shaping diamond tool to speed up the ﬁnishing process and to reduce or eliminate need for rework • No ﬁnal buff is required, and the gloss achieved will exceed the surface polish • Available with Hook and Loop or rigid snail-lock backing

Super-Edge 5-Step Diamond Discs C-Frame Machines

51.75 51.75 51.75 51.75 51.75 51.75 51.75

57.75 57.75 57.75 57.75 57.75 57.75 57.75

• Only 5 steps for complete curved edge processing on automatic machines • Produces a ﬁnished product in the fastest time possible • Redesigned for faster cutting • Three rugged resin polishing discs that match or exceed the existing surface polish • Much faster and more cost effective than conventional discs • Slightly over 300 passes for a ﬁnished bullnose edge compared to 500 with regular tools • Hook and Loop Snail-Lock holder saves time and eliminates hard stop adjuster when switching from metal hard stop to pressure polishing settings

SPECIALTY POLISHING SYSTEMS Twincur Resin Bond

Straight and Beveled Edge Polishing on Granite

Twincur Final Buff

Straight and Beveled Edge Final Polishing

Will work on wet polishing singlehead machines such as Park® Pro Edge, Comandulli, Mantello, Thibault, Cavani, and Denver along with many other imported polishing machines that use the 4” Snail Lock adapter. They will also work on multiple-head machines such as Lofﬂer series KSL-RK. Material edges, sized up to 1-1/4” thickness, are easily polished. However, you can polish double stacked laminated edges up to 1-1/2” successfully. SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4”

A-SF40100R A-SF40200R A-SF40500R A-SF41000R A-SF42000R A-SF43000R

100 Blue Resin 200 Yellow Resin 500 Red Resin 1000 Dark Green Resin 2000 Light Green Resin 3000 Brown Resin

133.97 133.97 133.97 133.97 133.97 133.97

Twincur ES

Straight and Beveled Edge Polishing on Engineered Stone Speciﬁcally developed to polish engineered stone, Twincur ES uses the 5” Snail Lock adapter commonly used on single- and multiple-head machines. Twincur ES will work on single-head edge polishing machines from manufacturers such as Cavani, Comandulli, Denver, Mantello, Montresor, Park Industries®, Thibaut, Z.Bavelloni and many other imported machines. Multiple-head edge polishing machines such as Comandulli, Denver, Lofﬂer, Marmo Meccanica, Montresor and other imported types of machines will accept Twincur ES as well.

Cyclone Straight Edge Wheels

50 Grit 8mm 100 Grit 8mm 200 Grit 8mm 400 Grit 8mm 800 Grit 8mm 1500 Grit 8mm 3000 Grit 8mm Black Buff 8mm 50 Grit 5mm 100 Grit 5mm 200 Grit 5mm 400 Grit 5mm 800 Grit 5mm 1500 Grit 5mm 3000 Grit 5mm Black Buff White Buff

Abrasive Technology’s in-line polishing tools are ideal for processing both natural and synthetic stones popular in today’s modern fabrication shop.

Increase Your Productivity and Generate Added Income For Your Business Throughput (Ft/Min) Machine Time (Hrs/Month) Machine Idle Time (%) Max Throughput (Lin Ft/Min) Tool Changes (Min.) Tool Changes (Month) Rework (%) Lost Productivity (Hr/Month) Lost Productivity (Lin Ft/Month) Max Production (Lin Ft/Month)

• Use the same disc for any edge shape without switching disc types. • Save time and money. • Eliminate the need to break in new discs.

Monthly Gain

• For all in-line multihead automated edge polishing machinery. • Use immediately after a metal bond forming tool to speed up the finishing process and to reduce or eliminate costly rework. • Produce a better finish in fewer passes. • No final buff is required.

AT-C911D5200 AT-C911D5202 AT-C911D5203 AT-C911D5204 AT-C911D5205 AT-C911D5206 AT-C911D5207 AT-C911D5208

AT-S4750304 AT-S475001 AT-S4750305 AT-S475002

111.00 111.00 111.00 111.00 111.00 111.00 111.00 111.00

AT-C911D6200 AT-C911D6202 AT-C911D6203 AT-C911D6204 AT-C911D6205 AT-C911D6206 AT-C911D6207 AT-C911D6208

139.00 139.00 139.00 139.00 139.00 139.00 139.00 139.00

6’’ Coarse Hybrid Snail Lock 6’’ Fine Hybrid Snail Lock 5’’ Coarse Hybrid Snail Lock 5’’ Fine Hybrid Snail Lock

285.50 263.75 254.50 239.75

• Combine the best of resin and metal bonds • Deliver the best possible depth of color for dark stones • Fast and agressive • Low operating pressure • Easily remove deep scratches using a ﬁne • Increased travel speeds grit, leaving a perfect ﬁnish • Last longer than traditional resin discs

• Same advantages of Super-Edge • NEW! Pigmentation has been removed from the diamond section to alleviate color transfer onto natural and synthetic surfaces.

AT-C9110001 AT-C9110002 AT-C9110003 AT-C9110004 AT-C9110005 AT-C9110006 AT-C9110007 AT-C9110008

• Color coding for easy identiﬁcation is now located in the support side of disc. • Supports ﬁtted with three radial holes to facilitate locking the disc to ease the removal operation

111.50 111.50 111.50 111.50 111.50 111.50 111.50 111.50

AT-C9110011 AT-C9110012 AT-C9110013 AT-C9110014 AT-C9110015 AT-C9110016 AT-C9110017 AT-C9110018

120

220

400

800

1800

120

220

400

800

1800

120

220

400

600

800

1800

120

220

400

600

800

1800

220

400

600

1800

220

400

800

600

1800

220

400

600

800

1800

3500

220

400

600

800

1800

139.50 139.50 139.50 139.50 139.50 139.50 139.50 139.50

3500

SPECIALTY POLISHING SYSTEMS Alpha Twincur EB

Bullnose Edge Polishing on Engineered Stone Great for straight and bullnose edges on engineered stone/quartz surfaces. Speciﬁcally developed to polish bullnose edges on engineered stone using automated edge polishing machines. Twincur EB ﬁts on the 5” snail lock adapter commonly used on single- and multiple-head machines. Easy operation and fast/consistent results. Designed for high quality performance and longevity.

Genesis Abrasive Discs Designed to grind, hone and polish surfaces to a smooth ﬁnish. Genesis sanding discs work well on almost all hard surfaces and substances including glass, ceramics, stone, plastics and composites. Wet use only - Q.R.S. backing.

GRIT

3’’ PART #

PRICE $

4’’ PART #

PRICE $

5’’ PART #

PRICE $

70 120 220 400 600 Nickel 600 Resin 800 1800 3500

AT-C911G3101 AT-C911G3102 AT-C911G3103 AT-C911G3104 AT-C911G3105N AT-C911G3105R AT-C911G3106 AT-C911G3107 AT-C911G3108

22.00 19.00 15.75 14.25 14.25 13.25 13.25 13.25 13.25

AT-C911G4101 AT-C911G4102 AT-C911G4103 AT-C911G4104 AT-C911G4105N AT-C911G4105R AT-C911G4106 AT-C911G4107 AT-C911G4108

39.75 34.25 27.50 25.25 26.75 22.50 22.50 22.50 22.50

AT-C911G5101 AT-C911G5102 AT-C911G5103 AT-C911G5104 AT-C911G5105N AT-C911G5105R AT-C911G5106 AT-C911G5107 AT-C911G5108

62.00 51.95 43.95 39.75 39.75 36.95 36.25 36.25 36.25

7’’ PART #

PRICE $

AT-C911G7201 109.75 AT-C911G7202 94.75 AT-C911G7203 78.75 AT-C911G7204 64.25 AT-C911G7205N 62.95 AT-C911G7205R 56.75 AT-C911G7206 56.75 AT-C911G7207 56.75 AT-C911G7208 56.75

SPECIALTY POLISHING SYSTEMS Abrasive Technology Slabmaster

• Exceeds original factory finish on granite and marble • Quick grit changes • Fits most radial arm machines • Large pin attachment • Very few steps to final finish

308.50 308.50 271.00 271.00 271.00 271.00 206.50 -

491.00 491.00 390.00 390.00 209.50 209.50 118.50 110.95

Summit Metal Bond Wheels

Summit Resin Bond Wheels

They grind and hone the granite surface making it smooth enough to be polished. These wheels remove gang saw marks and prepare the granite surface for transition to polishing grits.

Designed to match the factory ﬁnish provided by large multihead polishing machines. Most surface polishing applications are easily accomplished with these resin wheels.

Surface Preparation for Polishing

491.00 491.00 390.00 390.00 209.50 209.50 118.50 110.95

Surface Preparation for Polishing

SPECIALTY POLISHING SYSTEMS Stone Antique Brush Wheels

Alpha Antique Brush Wheels

Give a natural antique look like an old leather belt or even a matte honed ﬁnish on your ﬂat granite, marble, and engineered stone surfaces.

Create a stylish textured ﬁnish to your workpiece. Developed with TYNEX®, a ﬁlament from DuPont, to ensure safety and exceptional performance, these brushes can be used on the most popular edge polishing machines, handheld sanders and polishers.

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4”

SIS-ABW4024 SIS-ABW4036 SIS-ABW4060 SIS-ABW4120 SIS-ABW4240 SIS-ABW4320 SIS-ABW4500 SIS-4BACKER-SL

24 Resin 36 Resin 60 Resin 120 Resin 240 Resin 320 Resin 500 Resin Snail Lock Adapter

28.00 28.00 28.00 28.00 28.00 28.00 28.00 45.00

5” 5” 5” 5” 5” 5” 5” 5”

SIS-ABW5024 SIS-ABW5036 SIS-ABW5060 SIS-ABW5120 SIS-ABW5240 SIS-ABW5320 SIS-ABW5500 SIS-5BACKER-SL

24 Resin 36 Resin 60 Resin 120 Resin 240 Resin 320 Resin 500 Resin Snail Lock Adapter

42.00 42.00 42.00 42.00 42.00 42.00 42.00 55.00

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4”

A-AB4024 A-AB4036 A-AB4060 A-AB4120 A-AB4240 A-AB4320 A-PVA-5/8

24 Resin 36 Resin 60 Resin 120 Resin 240 Resin 320 Resin Snail Lock Adapter

31.35 31.35 31.35 31.35 31.35 31.35 50.08

5” 5” 5” 5” 5” 5” 5”

A-AB5024 A-AB5036 A-AB4060 A-AB4120 A-AB4240 A-AB4320 A-SFAT-5/8

24 Resin 36 Resin 60 Resin 120 Resin 240 Resin 320 Resin Snail Lock Adapter

38.70 38.70 38.70 38.70 38.70 38.70 80.80

DIAMOND HAND PADS Stone

Diamond Hand Pads Excellent for abrading marble, granite, agglomerated stone, ceramics, glass and composites.

Abrasive Technology Diamond Hand Pads

Excellent for abrading marble, granite, agglomerated stone, ceramics, glass and composites • Their ideal hand size allows the ﬁnishing of surface shapes and areas that are hard to reach with power tools • Use dry or wet

Alpha

Diamond Hand Pads Perform convenient, on-site polishing, on materials such as glass, ceramics, marble, granite, concrete, terrazzo and quartz surfaces.

2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’ 2-1/2’’ x 4’’

AT-C913H1011 AT-C913H1012 AT-C913H1013 AT-C913H1014 AT-C913H1015N AT-C913H1015R AT-C913H1016 AT-C913H1017 AT-C913H1018

70 Grit 120 Grit 220 Grit 400 Grit 600N Grit 600R Grit 800 Grit 1800 Grit 3500 Grit

20.25 17.25 14.75 12.50 12.50 10.75 10.75 10.75 10.75

POLISHING DRUMS Cyclone

• Edge polishing for sink cut-outs • Recommended use: Oscillate up and down for proper even drum wear • Rubber drum increases tread life & reduces vibration • 5/8 - 11 female thread (M18 x 2)

Polishing Drum Wheels

SIZE

PART #

DESCRIPTION

PRICE $

2” x 2” 2” x 2” 2” x 2” 2” x 2” 2” x 2” 2” x 2” 2” x 2” 2” x 2” 2” x 2”

C-RD250 C-RD2100 C-RD2200 C-RD2400 C-RD2800 C-RD21500 C-RD23000 C-RD2BB C-RD2BW

50 Grit 100 Grit 200 Grit 400 Grit 800 Grit 1500 Grit 3000 Grit Black Buff White Buff

27.50 27.50 27.50 27.50 27.50 27.50 27.50 30.50 30.50

SANDPAPER Stone Plus PSA

Stone Plus Velcro Backed

Silicone Carbide Sandpaper

Silicone Carbide Sandpaper • Use wet or dry • Long Lasting • Tear Resistant • Maximum RPM: 4000 • Resists loading

• Aggressive and long lasting grinding performance. • Self-adhesive SIZE

PART #

DESCRIPTION

PRICE $

5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’

SIS-SPSC0040 SIS-SPSC0060 SIS-SPSC0080 SIS-SPSC0120 SIS-SPSC0220 SIS-SPSC0320 SIS-SPSC0400 SIS-SPSC0600 SIS-SPSC0800 SIS-SPSC1200 SIS-SPSC-KIT

40G - 50 P/Box 60G - 50 P/Box 80G - 100 P/Box 120G - 100 P/Box 220G - 100 P/Box 320G - 100 P/Box 400G - 100 P/Box 600G - 100 P/Box 800G - 100 P/Box 1200G - 100 P/Box ASSORTED (40G-600G)

20.00 17.00 27.75 27.75 27.75 27.75 27.75 27.75 27.75 27.75 28.95

SIZE

PART #

DESCRIPTION

PRICE $

4’’ 4’’ 4’’ 4’’ 4’’ 4’’ 4’’ 4’’ 4’’

SIS-SPSC4V0040 SIS-SPSC4V0060 SIS-SPSC4V0080 SIS-SPSC4V0120 SIS-SPSC4V0220 SIS-SPSC4V0320 SIS-SPSC4V0400 SIS-SPSC4V0600 SIS-SPSC4VKIT

40G - 50 P/Box 60G - 50 P/Box 80G - 50 P/Box 120G - 50 P/Box 220G - 50 P/Box 320G - 50 P/Box 400G - 50 P/Box 600G - 50 P/Box ASSORTED (40G-600G)

19.50 17.75 15.75 14.95 14.95 14.95 14.95 14.95 23.95

5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’ 5’’

SIS-SPSC5V0040 SIS-SPSC5V0060 SIS-SPSC5V0080 SIS-SPSC5V0120 SIS-SPSC5V0220 SIS-SPSC5V0320 SIS-SPSC5V0400 SIS-SPSC5V0600 SIS-SPSC5VKIT

40G - 50 P/Box 60G - 50 P/Box 80G - 50 P/Box 120G - 50 P/Box 220G - 50 P/Box 320G - 50 P/Box 400G - 50 P/Box 600G - 50 P/Box ASSORTED (40G-600G)

24.50 22.50 20.50 20.00 20.00 20.00 20.00 20.00 28.50

Alpha Q.R.S. - Backed

Silicone Carbide Sandpapers Discs • Use wet or dry. • Maximum RPM: 4000 • Sold in boxes of 50 pieces. • Choose 4” or 5” diameter discs. SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

4’’ 4’’ 4’’ 4’’ 4’’ 4’’ 4’’ 4’’

A-MP40080 A-MP40120 A-MP40240 A-MP40320 A-MP40400 A-MP40500 A-MP40600 A-MP40KIT

80 Grit - 50 P/Box 120 Grit - 50 P/Box 240 Grit - 50 P/Box 320 Grit - 50 P/Box 400 Grit - 50 P/Box 500 Grit - 50 P/Box 600 Grit - 50 P/Box Assorted - 50 P/Box

20.42 20.42 20.42 20.42 20.42 20.42 20.42 21.71

5’’ 5’’ 5’’ 5’ 5’’ 5’’ 5’’ 5’’

A-MP50080 A-MP50120 A-MP50240 A-MP50320 A-MP50400 A-MP50500 A-MP50600 A-MP50KIT

80 Grit - 50 P/Box 120 Grit - 50 P/Box 240 Grit - 50 P/Box 320 Grit - 50 P/Box 400 Grit - 50 P/Box 500 Grit - 50 P/Box 600 Grit - 50 P/Box Assorted - 50 P/Box

28.47 28.47 28.47 28.47 28.47 28.47 28.47 28.93

SANDPAPER Hermes

Highly ﬂexible & self-stick silicone carbide sandpaper

• Highly ﬂexible adaptable paper backing • Long life coating means increased tool life • Good sanding result on transparent lacquer systems • Especially good results on lacquer intermediate sanding • Open coating prevents premature loading with sanding dust

RUBBING STONES Rubbing Stones Smoothes and dresses down cut tile and opening up the diamonds in small and large blades, router bits, core bits, etc.

ACCESSORIES

Rubber Back-up Pads Flexible

Rigid Back-up Pads

Rubber Back-up Pads Super Flexible

Plastic Back-up Pads (5/8" - 11 F)

Aluminum Back-Up Pads

Snail Lock Back-Up Adapter

ACCESSORIES Flexible Heads

Rigid Heads

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

2’’

A-GP25/8PD

5/8"-11 Thread

24.20

3’’ 3’’ 3’’

A-GP35/8PD A-GP3M14PD A-GP3M16PD

5/8"-11 Thread M14 Thread M16 Thread

24.99 24.99 24.99

3’’ 3’’ 3’’

A-GP35/8RG A-GP3M14RG A-GP3M16RG

5/8"-11 Thread M14 Thread M16 Thread

24.99 24.99 24.99

4’’ 4’’ 4’’

A-GP45/8PD A-GP4M14PD A-GP4M16PD

5/8"-11 Thread M14 Thread M16 Thread

26.95 26.95 26.95

4’’ 4’’ 4’’

A-GP45/8RG A-GP4M14RG A-GP4M16RG

5/8"-11 Thread M14 Thread M16 Thread

26.95 26.95 26.95

5’’ 5’’ 5’’

A-GP55/8PD A-GP5M14PD A-GP5M16PD

5/8"-11 Thread M14 Thread M16 Thread

40.55 39.22 39.22

5’’ 5’’ 5’’ Spacer

A-GP55/8RG A-GP5M14RG A-GP5M16RG A-RGSPACER

5/8"-11 Thread M14 Thread M16 Thread -

36.45 36.45 36.45 1.93

Diskit

Threaded Foam Rubber Backup Heads

• Tough and ﬂexible polyester urethane foam body engineered for maximum tensile strength and elongation • For use on most Q.R.S. backed or self-adhesive grinding and polishing discs • Maximum 10,000 RPM • Flexible edge allows pad to conform to surface contours • M8 x 1 1/4” for makita GV5000

TOP 5 SELLERS DISKIT pads are available with hook, vinyl and canvas faces in these proﬁles: A B 2 C 4 D 1 E F G H I J K L

N O 3 P Q 5

SUPER PREMIUM CORE BITS

• T-Segments for faster cutting • Vacuum brazed protection on the outside and inside • Extra long life

PART #

PRICE $

1-1/4” 1-3/8”

SIS-SPLCB114 SIS-SPLCB138

94.00 98.00

Cyclone Dry / Wet Core Bits

Alpha Dry / Wet Core Bits Easy preparation with minimum clean-up; Fits on most popular high-speed grinders; Very fast cutting on granite and engineered stone.

Pearl P5 Dry / Wet Core Bits • Designed with ADM (Advanced Diamond Matrix) & high diamond concentration for extra long life • Max 10,000 RPM • 5/8"-11 female thread • Vacuum brazed protection outside and inside of core • Extra coarse diamonds for aggressive cutting • Laser welded

Cyclone Dry / Wet Core Bits

SIZE

PART #

PRICE $

1-1/4” 1-3/8”

C-CDBYTU114 C-CDBYTU138

90.50 94.50

T-segment with diamond side protection on outside and inside shaft for ease of drilling and core release

SIZE

PART #

PRICE $

1-1/4” 1-3/8” 1-1/2”

C-CDBYTSD114 C-CDBYTSD138 C-CDBYTSD112

74.50 78.50 83.50

Cyclone Dry / Wet Core Bits Special “T” segments increase durability. Clean cutting SIZE

PART #

PRICE $

1” 1-1/2” 1-1/4” 1-3/4” 1-3/8” 1-5/8” 2” 2-1/4” 2-1/2” 2-3/8” 2-3/4” 6”

C-CDBYTD100 C-CDBYTD112 C-CDBYTD114 C-CDBYTD134 C-CDBYTD138 C-CDBYTD158 C-CDBYTD200 C-CDBYTD214 C-CDBYTD212 C-CDBYTD238 C-CDBYTD234 C-CDBYTD600

75.00 89.50 74.50 94.50 79.50 102.50 118.00 125.00 130.00 124.00 137.00 247.00

• Aggressive T-segment turbo rim designed for speed and durability • Can drill in 3cm Tropical Brown in under one minute • Vacuum brazed side diamonds makes any boring easy • New thicker core design ensures a stronger segment to core weld

PREMIUM CORE BITS Stone Plus Dry / Wet with Side Protection

• Smooth holes and clean cuts • Largest inventory from 3/4” to 5” • Vacuum brazed protection on the outside and inside of the core

Pearl P4 Dry Turbo Core Bit for Granite • Engineered with ADM (Advance Diamond Matrix) diamond pattern for cleaner cutting & long life • Embedded segments for added durability

STANDARD CORE BITS Dry / Wet with Side Protection

• Vacuum brazed protection on the outside and inside of the core • Great value

Hurricane Dry / Wet with Side Protection • Precision drilling of granite, marble or any hard stone. • 5/8"-11 female thread • Max: 6,500 RPM • Wet or dry use SIZE

PART #

PRICE $

1-1/4” 1-3/8” 1-1/2”

C-CDBYHD114 C-CDBYHD138 C-CDBYHD112

60.50 61.50 64.50

THIN WALL WET CORE BITS Thin Wall Core Bits

Dekton Thin Wall Core Bits

• True thin wall crown • High diamond concentration for faster and cleaner cuts

Designed for Dekton, Lapitec, Neolith and other ultra-compact materials. • Unique bond for fast and clean drilling • Wet use only

3/4" 1" 1-1/4" 1-3/8" 1-1/2" 1-3/4" 2"

SIS-SPTWCB34 SIS-SPTWCB1 SIS-SPTWCB114 SIS-SPTWCB138 SIS-SPTWCB112 SIS-SPTWCB134 SIS-SPTWCB2

64.00 66.00 72.00 74.00 76.00 86.00 88.00

SIZE

PART #

PRICE $

1-1/4" 1-3/8" 1-1/2"

OCE-22301-08002 OCE-22301-08001 OCE-22301-08003

64.00 68.00 73.00

WET CORE BITS Alpha Wet Core Bits

Cyclone Wet Core Bits

Easy preparation with minimum clean-up; For use on polishers with center water feeds or drill presses with water swivels (Max RPM 3,500); Very fast cutting on granite and engineered stone.

• Will drill most granites in under 30 seconds with water • A better alternative to thin wall core bits • Segments dropped into core 2mm and then welded for increased strength • Vacuum brazed side protection SIZE

PART #

PRICE $

1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” 2” 2-1/2” 3” 3-1/2” 4” 4-1/2” 5”

C-CDBS100 C-CDBS118 C-CDBS114 C-CDBS138 C-CDBS112 C-CDBS158 C-CDBS134 C-CDBS200 C-CDBS212 C-CDBS300 C-CDBS312 C-CDBS400 C-CDBS412 C-CDBS500

75.50 87.00 72.00 79.50 79.50 92.00 89.50 99.50 105.50 119.50 125.50 139.50 151.50 165.50

Pearl P5 Wet Core Bits

Pearl P3 Wet Core Bits

• High diamond concentration for extra long life • Special bond for long life, aggressive drilling and maximum performance

• Long life • Vacuum brazed side protection • 5/8-11 female thread • Max 4,000 RPM • Wet use only

MARBLE CORE BITS Cyclone Electroplated Marble Core Bits

Electroplated Marble Core Bits

• Cores through the softest marbles clean and chip free • Diamond brazed technology drills fast and easy • Can perform of granite with minimized life • Perform best wet, but can be used dry • Cooling slots allows for easier core removal when stuck

High precision holes without chipping on marble, glass, ceramic tile and other softer stones.

SIZE 1-1/4” 1-3/8” 1-1/2”

PART # C-CDBM114 C-CDBM138 C-CDBM112

PRICE $ 82.00 86.00 91.00

SPECIALTY CORE BITS Electroplated Diamond Drill Bits

Vacuum Brazed Core Bits

• Premium electroplated bits for drilling fastening holes, corner holes for cut-outs, pipe & faucet holes. Cuts clean, smooth holes. Use on granite, ceramic, marble, porcelain and glass surfaces. • Wet use only • 3/8’’ Shank

It helps you drill cleaner chip-free holes than electroplated core bits. They can be used either wet or dry. Ideal choice when drilling holes on marble and porcelain tile.

SIZE

PART #

PRICE $

3/4" 1" 1-1/4" 1-3/8" 1-1/2" 1-3/4" 2" 3"

OCE-22229-01008 OCE-22229-01001 OCE-22229-01002 OCE-22229-01003 OCE-22229-01004 OCE-22229-01005 OCE-22229-01006 OCE-22229-01007

28.50 30.00 32.00 37.00 40.00 46.00 50.00 75.00

Brazed T-31 Anchor Bits

Non-Core Drill Bits

Used for drilling anchor holes. Fast cutting and long life thanks to vacuum brazing technology.

• Premium electroplated bits for drilling fastening holes, corner holes for cut-outs, pipe & faucet holes. Cuts clean, smooth holes • Use on granite, ceramic, marble, porcelain and glass surfaces • Wet use only

SIZE

PART #

3/16" 1/4" 3/8" 3/16" 1/4" 3/8"

OCE-22429-02001 OCE-22429-02002 OCE-22429-02003 OCE-22429-02004 OCE-22429-02005 OCE-22429-02006

DESCRIPTION PRICE $ 3/8"-Shank 3/8"-Shank 3/8"-Shank 1/4"-Shank 1/4"-Shank 1/4"-Shank

22.00 25.00 30.00 22.00 25.00 30.00

Stone Plus Non-Core Bits

Cyclone Non-Coring and Coring Bits (dry/wet)

New dry segment allows these non-core bits to perform under high heat conditions.

New dry segment matrix allows these non-core drill bits to perform under high heat conditions. SIZE

PART #

3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4”

C-CDBYNC316 C-CDBYNC14 C-CDBYNC516 C-CDBYNC38 C-CDBY12 C-CDBY58 C-CDBY34

PRICE $ 42.50 49.50 51.50 52.50 59.00 65.00 69.00

Gundlach Porcelain Tile Bits Carbide Bits for small diameter holes in porcelain, stone or ceramic tile; For drilling screw anchor holes for shower doors, towel bars and other ﬁxtures. Special carbide tip ensures accurate holes and eliminates drill bit wander; Life expectancy of the PTB Carbide Bit in Porcelain tile is 20-30 holes with proper usage; When product life is exhausted in porcelain, the PTB Carbide Bit can be used in softer grade materials; The No. PTC-WFC Water Feed Clamp Kit provides the necessary supply of pressurized water for bit cooling; Holes can be drilled in as little as 20 seconds; The PTB Carbide Bit is designed for use in tile only . If drilling in installed tiles, use the correct size masonry bit for drilling the substrate behind the tile; Maximum depth of cut is 1/2". CAUTION: Must use a constant supply of pressurized water, 1/2" Drill using 700-900 rpm drill speed and rotary action only. SIZE

PART #

PRICE $

1/4” 3/16” 3/8” 5/16” 9/32”

AR-PTC1/4 AR-PTC3/16 AR-PTC3/8 AR-PTC5/16 AR-PTC9/32

29.95 29.95 35.95 32.95 37.95

SPECIALTY CORE BITS Stone Plus Finger Bits

Vacuum Brazed Trimmer Bit

Alpha® Trimmer Bit is versatile and can be adapted for use in construction trades wherever non-standard shaped cutouts are needed. This bit is perfect for electrical receptacles, water-valve holes, drains, shower knobs, etc. The vacuum brazed technology is speciﬁcally designed to provide an extended life when used on granites, engineered and natural stones, porcelain and ceramic tiles. It can be used wet or dry and ﬁts on a high-speed trimmer tool.

Improved diamond matrix allows for increased speeds, longer life and less noise.

Quartzite Incremental Cutting Tips • Free cutting on natural quartzite & Dekton. • Long lasting thanks to extra high diamond concentration • Use wet only.

Cyclone Half Gas Core Bits • T-segment design with new diamond technology increases life and minimizes segment loss • Designed with slot-openings on each side which prevents blow-outs SIZE

PART #

PRICE $

1-1/4” 1-3/8” 1-1/2”

C-CDBYH112 C-CDBYH114 C-CDBYH138

79.50 82.50 89.50

PART #

DESCRIPTION

PRICE $

OCE-22401-02018 OCE-22401-02019

D20 x M12 x 23 D20 x Reverse-M12 x 23

54.00 54.00

Stone Plus Screw On Tip M12 connection Long life for more cutouts with less glazing issues

Cyclone Finger Bit Stone Plus Adaptor

• Bottom segment gives the CNC operator the option of drilling into the slab like a core bit • Parameters for Fb158 * Feed rate : 8" ~ 12"/min * Speed : 4500 - 5500 • The 6 segment ﬁnger bit has the ﬁrst ever reverse apple core design - thicker in the middle

Allows you to use our core bits on a CNC machine

(5/8"-11 Male To 1/2 Gas Male)

SIZE

PART #

DESCRIPTION

PRICE $

1-5/8” 2-1/2” 1-5/8” 2” 1-5/8”

C-FB158 C-FB1212 C-FBSHS158 C-FBSHS200 C-FB158TS

6 segments 6 segments 7 segments 7 segments Thin segments

134.00 157.00 155.00 162.00 125.00

Diamond Burr Set • For detailed work on marble and soft stone using handheld tools • Electroplated • Use wet or dry

Cyclone T108 Bits • For use on sink cut-out machines • Tapered bits have M12 thread (1/2 gas male thread) • New Super Cyclone screw on tip is taller and lasts longer for more cutouts with less glazing issues SIZE

PART #

DESCRIPTION

2” C-FBSTIP Screw on Router Tip 20 x 22mm C-FBSTIP-S Super Cyclone Finger Bit Tip 5” x 15mm C-T108TFB 1/2 Gas Male Adaptor

Suction Drilling Rings PRICE $ 82.00 72.00 161.00

Designed to contain water during coring applications. Increases the life of your core bits

16.50

CUP WHEELS Steel Body Turbo Cup Wheels

DESCRIPTION

This supreme quality cup wheel utilizes a unique design that allows for fast and aggressive material removal while removing dust and slurry in the work area during grinding.

4” 4” 4” 5” 5” 5” 6” 6” 6” 7” 7” 7”

SIS-4SPCW-SC SIS-4SPCW-SF SIS-4SPCW-SM SIS-5SPCW-SC SIS-5SPCW-SF SIS-5SPCW-SM SIS-6SPCW-SC SIS-6SPCW-SF SIS-6SPCW-SM SIS-7SPCW-SC SIS-7SPCW-SF SIS-7SPCW-SM

Coarse Fine Medium Coarse Fine Medium Coarse Fine Medium Coarse Fine Medium

75.00 75.00 75.00 97.00 97.00 97.00 115.00 115.00 115.00 147.00 147.00 147.00

DW Style Grinding Wheels They are the ideal grinding wheels to proﬁle edges, smooth out inside sink hole cuts, smooth rough surfaces, prepare surfaces for lamination, and simple heavy material removal.

SIZE

PART#

DESCRIPTION

PRICE $

4” 4”

SIS-SPCW-VC SIS-SPCW-AVC

Steel Coarse Aluminum Coarse

87.00 84.00

Aluminium Body Turbo Cup Wheels

SIZE

PART #

DESCRIPTION PRICE $

4” 4” 6” 6”

A-DW4C11 A-DW4M11 A-DW6C11 A-DW6M11

Coarse Medium Coarse Medium

153.91 143.60 308.18 287.90

Cyclone Cup Wheels

Convex Coarse

• Lightweight aluminum body for less stress on the grinder than the normal steel body • Turbo Segments for faster and more aggressive grinding and shaping • Loaded with high grade diamonds dispersed evenly through the matrix DESCRIPTION

4”

SIS-4SPCW-CC

Convex Coarse

95.00

• Balanced to eliminate vibration and chipping when shaping • Aggressive design with thick turbo segments and diamond content SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 5” 6” 7”

C-CW40 C-CW40M C-CW40F C-CW50 C-CW60 C-CW70

Coarse Medium Fine Coarse Coarse Coarse

85.50 85.50 85.50 97.50 119.50 135.50

CUP WHEELS Rubber Body Cup Wheels • Unique rubber body minimizes vibrations • Smooth, chip-free grinding • 5/8”-11 Female arbor / Wet or dry use SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4”

SIS-SPCW-RBC SIS-SPCW-RBF SIS-SPCW-RBM

Coarse Fine Medium

89.00 89.00 89.00

Hurricane Turbo 4” Cup Wheels

Stone Plus Monstera Resin Filled Cup Wheels

• Wet or dry use • Body made of aluminum • 5/8” - 11 Female arbor

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

4” 4” 4”

SIS-SPCWMC SIS-SPCWMF SIS-SPCWMM

Coarse Fine Medium

97.00 97.00 97.00

4” 4” 4” 6”

C-HCW4C C-HCW4M C-HCW4F C-HCWC6F

Coarse Medium Fine Coarse

75.50 75.50 75.50 95.50

Pearl P5 Cup Wheels

Pearl P4 Turbo 4” Cup Wheels

• High diamond concentration for extra long life • Turbo design for fast, smooth grinding • Designed to be used on a variety of materials • 5/8” - 11 Female arbor • Wet or dry use

• Extra long life • Turbo design for fast, smooth grinding • For use on a variety of material • Wet or dry use • 5/8” - 11 Female arbor

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 6” 7”

PEA-PW4CH PEA-PW4MH PEA-PW4F PEA-PW6CH PEA-SW07C

Coarse Medium Fine Coarse Coarse

164.50 149.50 149.50 286.50 294.50

SIZE

PART #

4” 4”

PEA-PW4CHPRF PEA-PW4MHPRF

DESCRIPTION PRICE $ Coarse Medium

6X6 Resin Filled Cup Wheels

Cyclone Flat Resin Cup Wheel

• Features 12 segments with beveled edge for fast grinding • Resin ﬁlled segments and proper balancing for a chip-free and vibration free grinding

• 12 grinding segments • Wet or dry use • 5/8” - 11 Female arbor

SIZE

DESCRIPTION PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4”

SIS-SPCW6X6C SIS-SPCW6X6F SIS-SPCW6X6M

Coarse Fine Medium

97.00 97.00 97.00

4” 4” 4” 4” 4” 4”

PART #

88.50 88.50

DESCRIPTION

C-CWFR40 Coarse w/ water channels C-CWFR4M Medium w/ water channels C-CWFR4F Fine w/ water channels C-CWFRN4C Coarse C-CWFRN4M Medium C-CWFRN4F Fine

PRICE $ 82.50 82.50 82.50 79.50 79.50 79.50

CUP WHEELS 8X8 Resin Filled Cup Wheels

Electroplated Rubber Body Cup Wheel for Dekton

• Fast grinding and smooth ﬁnish • Unique mix of metal and resin bonds • Less bouncing and no chipping • Long Life

• Rubber body absorbs all vibrations • Less user fatigue and less strain on the tool • Special electroplated technology for long life • Easy grinding of Dekton and other very hard materials

SIZE 4” 4” 4”

PART #

DESCRIPTION

SIS-SPCW8X8C SIS-SPCW8X8F SIS-SPCW8X8M

Coarse Fine Medium

PRICE $ 97.00 97.00 97.00

SIZE 4” 4”

PART #

DESCRIPTION PRICE $

SIS-SPCWD100 SIS-SPCWD200

Coarse Fine

97.00 97.00

Pearl P4 Supreme Dry 4’’ Shaping Wheel

Pearl P4 Button Cup Wheels

• Resin ﬁlled between diamond segments prevent vibration and chipping • For light grinding on granite and marble • 5/8” - 11 Female arbor • Wet or dry use

• Great for removing mastic, resin or meshing • Grinds concrete, stone and other hard materials • Steel body with ﬁxed 5/8”-11 Thread • Wet or dry use

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4”

PEA-DS04FHSPF PEA-DS04MHSPF PEA-DS04CHSPF

Fine Medium Coarse

88.50 88.50 88.50

3 Buttons 5 Buttons 6 Buttons 7 Buttons

SL3 Cup Wheels

Dekton Cup Wheels

• Use for heavy, quick stock removal • Fits NSI Solutions SL3 Adapter • Snail lock attachment • Available in Fine, Medium and Coarse grit

Apexx Dekton cup wheels are made with wide continuous rim for smooth grinding and minimal chipping. Designed for Dekton, Lapitec, Neolith, and other ultracompact materials

SIZE 3” 3” 3”

PART #

DESCRIPTION

NSI-SL3-CUP3-A NSI-SL3-CUP3-M NSI-SL3-CUP3-F NSI-SL3-ADAPT

Coarse Medium Fine Adapter

PRICE $ 84.00 84.00 84.00 49.95

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4”

OCE-21701-01009 OCE-21701-01008 OCE-21701-01007

Coarse, Green Medium, Yellow Fine, Blue

93.00 93.00 93.00

Vacuum Brazed Flat Cup Wheels

Cyclone V1 Vacuum Brazed Cup Wheels

• Fast, clean and aggressive grinding • Versatile tool for edge shaping • Cutting and shaping function

• Vacuum Brazed • Wet or dry use • 5/8”-11 Female arbor

SIZE 4” 4” 5” 5”

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

SIS-4CWVBC SIS-4CWVBM SIS-5CWVBC SIS-5CWVBM

Coarse Medium Coarse Medium

84.00 84.00 104.00 104.00

4” 4” 5” 5”

C-BGC430 C-BGC450 C-BGC530 C-BGC550

30/40 Grit 50/60 Grit 30/40 Grit 50/60 Grit

99.50 99.50 116.50 116.50

Cyclone Super Cluster Grinding Wheel • For granite and concrete • Designed for rapid removal of mesh backings, epoxy coatings, paint, rust and all adhesive materials • 5/8”-11 Female arbor • All sizes waterproof

SIZE

PART #

DESCRIPTION

PRICE $

4” 5” 5” 5” 6” 7” 7”

C-SCRG4 C-SCRG5 C-SCRG5C C-SCRG5F C-SCRG6 C-SCRG7 C-SCRG7MB

Coarse Medium Coarse Fine Coarse Coarse Coarse Metal Body

69.50 99.95 99.95 99.95 120.00 146.50 150.00

CUP WHEELS DS Style Grinding Wheels

Vexcel Rigid Disc

• 5/8"-11 female thread • Max 4,000 RPM • Wet use only

• Alpha Vexcel Discs are designed for heavy duty material removal applications on natural stone, engineered stone, glass ﬁber reinforcement plastic, stainless steel & non-ferrous metal surfaces • Rigid steel body with rubber backing for less vibration and noise • 5/8” - 11 Female arbor •Multi-layered diamond pattern for aggressive material removal & long life

General Purpose Rigid Grinding Disc

SIZE

PART #

DESCRIPTION

PRICE $

4”

A-DS4C11

Coarse - 5/8”-11

124.22

Surfacer Grinding Wheels

Grinding Cup Wheel for Flat Surfaces

Two-step process to smooth out the underside of tabletops. The coarse grit (black) is designed for fast material removal and the ﬁne grit (white) smooths out the surface of the stone.

Vextra General Purpose Flat Grinding Disc

PART #

4.5” 4.5” 4.5” 4.5” 4.5” 4.5” 5” 5” 5” 5” 5” 5” 7” 7” 7” 7” 7” 7”

VDD4535 VDD453H VDD4550 VDD455H VDD4580 VDD458H VDD5035 VDD503H VDD5050 VDD505H VDD5080 VDD508H VDD7035 VDD703H VDD7050 VDD705H VDD7080 VDD708H

DESCRIPTION 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11

35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit 35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit 35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit

PART #

4.5” 4.5” 4.5” 4.5” 4.5” 4.5” 4.5” 4.5” 5” 5” 5” 5” 5” 5” 5” 5” 7” 7” 7” 7” 7” 7” 7” 7”

A-VDR4525 A-VDR452H A-VDR4535 A-VDR453H A-VDR4550 A-VDR455H A-VDR4580 A-VDR458H A-VDR5025 A-VDR502H A-VDR5035 A-VDR503H A-VDR5050 A-VDR505H A-VDR5080 A-VDR508H A-VDR7025 A-VDR702H A-VDR7035 A-VDR703H A-VDR7050 A-VDR705H A-VDR7080 A-VDR708H

DESCRIPTION 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11 7/8" 5/8"-11

25 Grit 25 Grit 35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit 25 Grit 25 Grit 35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit 25 Grit 25 Grit 35 Grit 35 Grit 50 Grit 50 Grit 80 Grit 80 Grit

PRICE $ 86.00 87.50 65.00 66.50 66.00 67.50 66.00 67.50 91.00 92.50 69.00 70.50 69.00 70.50 69.00 70.50 152.00 153.50 98.00 99.50 98.00 99.50 98.00 99.50

Spike Disc

Coating Removal Made Easy

• Designed to grind steel, stainless steel and non-ferrous metals for the Ex ZONE where spark reduction is a priority. Can be used on natural stone, engineered stone. • Flat grinding surface covers more area. • 5/8” - 11 Female arbor • Open mesh diamond pattern eliminates clogging and heat buildup SIZE

SIZE

PRICE $ 66.00 67.50 66.00 67.50 69.00 70.50 69.50 71.00 69.50 71.00 69.50 71.00 91.00 92.50 91.00 92.50 91.00 92.50

• Alpha Spike Discs are designed for removal of thick coating materials such as Epoxy and Urethane on concrete ﬂoors without damage to the concrete surface, unlike PCD cup wheels • 35 Grit or 50 Grit available • 5/8”-11 Female arbor • Open mesh diamond pattern eliminates clogging and heat buildup

SIZE

PART #

4.5” 4.5” 4.5” 4.5” 5” 5” 5” 5” 5” 7” 7” 7” 7”

A-VCS4535 A-VCS453H A-VCS4550 A-VCS455H A-VCS5035 A-VCS503H A-VCS503Q A-VCS5050 A-VCS505H A-VCS7035 A-VCS703H A-VCS7050 A-VCS705H

DESCRIPTION 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11 SQ Drive 7/8” 5/8”-11 7/8” 5/8”-11 7/8” 5/8”-11

35 Grit 35 Grit 50 Grit 50 Grit 35 Grit 35 Grit 35 Grit 50 Grit 50 Grit 35 Grit 35 Grit 50 Grit 50 Grit

PRICE $ 68.00 69.50 68.00 69.50 73.00 74.50 73.00 73.00 74.50 91.00 92.50 91.00 92.50

GRINDING WHEELS, WHEEL DRESSERS, ETC Mako Silicone Carbide

Zero Tolerance Wheels

• Faster grinding on marble and granite • Higher grade green silicone carbide

• Superior cutting with zero vibration • Water feed holes for wet or dry use • Coarse matrix for faster and more aggressive grinding

SIZE

PART #

DESCRIPTION

PRICE $

4” 4” 4” 4” 4” 4” 4” 4”

SIS-4MAKO016 SIS-4MAKO024 SIS-4MAKO036 SIS-4MAKO046 SIS-4MAKO060 SIS-4MAKO080 SIS-4MAKO120 SIS-4MAKO220

16 Grit 24 Grit 36 Grit 46 Grit 60 Grit 80 Grit 120 Grit 220 Grit

11.95 11.95 11.95 11.95 11.95 11.95 11.95 11.95

5” 5” 5” 5” 5” 5” 5” 5”

SIS-5MAKO016 SIS-5MAKO024 SIS-5MAKO036 SIS-5MAKO046 SIS-5MAKO060 SIS-5MAKO080 SIS-5MAKO120 SIS-5MAKO220

16 Grit 24 Grit 36 Grit 46 Grit 60 Grit 80 Grit 120 Grit 220 Grit

14.95 14.95 14.95 14.95 14.95 14.95 14.95 14.95

SIS-WDT-00 SIS-WDT-01 SIS-WDT-02

11.5" 12.0" 15.0"

1.5 2.0 5.0

Up to 10" 10 to 16" 16 to 36"

CUTTER O.D (Regular)

I.D

THICK- CUTTING NESS FACE

SIS-WDT-R-00

No. 0 1-1/4" 1/4"

3/32"

1/2"

SIS-WDT-R-01

No. 1 1-1/2" 1/2"

3/32"

1/2"

SIS-WDT-R-02

No. 2 2-3/8" 19/32"

1/8"

875"

PRICE $

2” 2” 3” 3”

SIS-SPZT2WR SIS-SPZT2NR SIS-SPZT3WR SIS-SPZT3NR

Resin Filled Zero Tolerance Wheel Resin Filled Zero Tolerance Wheel

131.00 114.00 168.00 148.00

SIZE

PART #

DESCRIPTION

PRICE $

1" 1" 2" 2" 3" 3"

C-SRWC1158 C-SRWC1NR C-SRWC2158 C-SRWC2NR C-SRWC3158 C-SRWC3NR

With resin No resin With resin No resin With resin No resin

92.50 86.50 127.50 109.50 172.00 129.50

Cyclone Stock Removal Wheels

2.0" 3.0" 4.0"

.5" .5" 1"

20.50 25.50 36.50

Replacement Cutters PART #

DESCRIPTION

• Balanced and resin ﬁlled for zero vibration (1” non-resin ﬁlled) • Designed with water feed holes for wet or dry use • Vertical oscillation recommended for faster stock removal and even wear • Coarse matrix for aggressive grinding

DRESSER GRINDING GRINDING WEIGHT DRESSING PRICE $ LENGHT WHEEL No. WHEEL (lbs.) FACE FACE (Hooded) DIAMETER

No. 0 No. 1 No. 2

PART #

Cyclone Zero Tolerance Grinding Wheels

Wheel Dresser Tool

PART #

SIZE

CUTTER SET

4 cutters, 2 spacers 4 cutters, 2 spacers 6 cutters, 2 spacers

QTY. PRICE $ (EACH)

14.50

18.50

10.50

• Removes radius stock chip-free • Zero Vibration • Recommended use: Oscillate wheel up and down to wear evenly and avoid grooves • 5/8"-11 thread [M18x2] SIZE

PART #

DESCRIPTION

PRICE $

2” x 2” 2” x 2” 2” x 2” 3” x 2”

C-SRW236 C-SRW260 C-SRW2120 C-SRW3036

36 Grit 60 Grit 120 Grit 36 Grit

129.50 129.50 129.50 189.50

Vacuum Brazed Drum Wheel • Water feed holes for wet and dry use • Faster material removal rate SIZE 2” X 2’’ 2” X 2” 2” X 2’’

PART #

DESCRIPTION

PRICE $

SIS-2SRW036 SIS-2SRW060 SIS-2SRW120

36 Grit 60G Grit 120G Grit

104.00 104.00 104.00

ROUTER BITS AND PROFILING TOOLS Proﬁling Wheels • The most popular edges designed to speed up the fabrication process and save you money • Smooth and chip-free edging & long life

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

SIS-RBA201 SIS-RBA202 SIS-RBA301 SIS-RBA302

Eased A20 Router Bit Pos 1 Eased A20 Router Bit Pos 2 Eased A30 Router Bit Pos 1 Eased A30 Router Bit Pos 2

200.00 200.00 295.00 295.00

SIS-RBQ301 SIS-RBQ302

Q30 Cove Ogee Pos 1 Q30 Cove Ogee Pos 2

295.00 295.00

SIS-RBB201 SIS-RBB202 SIS-RBB301 SIS-RBB302

B20 Demi bullnose Pos 1 B20 Demi bullnose Pos 2 B30 Demi bullnose Pos 1 B30 Demi bullnose Pos 2

200.00 200.00 295.00 295.00

SIS-RBV201 SIS-RBV202 SIS-RBV301 SIS-RBV302 SIS-RBV401 SIS-RBV402

V20 Full Bullnose Pos 1 V20 Full Bullnose Pos 2 V30 Full Bullnose Pos 1 V30 Full Bullnose Pos 2 V40 Full Bullnose Pos 1 V40 Full Bullnose Pos 2

200.00 200.00 295.00 295.00 395.00 395.00

SIS-RBE101 SIS-RBE201 SIS-RBE202 SIS-RBE251 SIS-RBE301 SIS-RBE302

E10 Bevel Pos 1 E20 Bevel Pos 1 E20 Bevel Pos 2 E25 Bevel Pos 1 E30 Bevel Pos 1 E30 Bevel Pos 2

119.00 200.00 200.00 225.00 295.00 295.00

SIS-RBBB301 SIS-RBBB302

BB30 Triple Waterfall Pos 1 BB30 Triple Waterfall Pos 2

350.00 350.00

SIS-RBF201 SIS-RBF202 SIS-RBF301 SIS-RBF302

F20 Ogee Pos 1 F20 Ogee Pos 2 F30 Ogee Pos 1 F30 Ogee Pos 2

200.00 200.00 295.00 295.00

SIS-RBH201 SIS-RBH202 SIS-RBH301 SIS-RBH302

Dupont H2O Router Bit Pos 1 Dupont H2O Router Bit Pos 2 Dupont H3O Router Bit Pos 1 Dupont H3O Router Bit Pos 2

200.00 200.00 295.00 295.00

SIS-RBL201 SIS-RBL202 SIS-RBL301 SIS-RBL302

Cove L20 Router Bit Pos 1 Cove L20 Router Bit Pos 2 Cove L30 Router Bit Pos 1 Cove L30 Router Bit Pos 2

200.00 200.00 295.00 295.00

SIS-RBO201 SIS-RBO202 SIS-RBO301 SIS-RBO302

Cove Dupont 020 Router Bit Pos 1 Cove Dupont 020 Router Bit Pos 2 Cove Dupont 030 Router Bit Pos 1 Cove Dupont 030 Router Bit Pos 2

200.00 200.00 295.00 295.00

PART #

DESCRIPTION

SIS-RBFBERING SIS-RBVBERING SIS-RBSCREW1 SIS-RBSCREW2 SIS-RBSCREW3 SIS-RBSCREW4

PRICE $

Bearing for Stone Ogee Bearing for Stone Full Bullnose Screw 10x25 for F20 Screw 10x30 for B20, V20, V30 Screw 10x35 for E20, F30, Q30, V40 Screw 10x40 for B30, E25, E30

20.00 20.00 8.50 8.50 8.50 8.50

CUSTOM PROFILES AVAILABLE

Vacuum Brazed Proﬁlers (5-8" - Female)

PART #

DESCRIPTION

PRICE $

SIS-VBRBB1 SIS-VBRBB12 SIS-VBRBB14 SIS-VBRBB34 SIS-VBRBB38

1" Demi Bullnose 1/2" Demi Bullnose 1/4" Demi Bullnose 3/4" Demi Bullnose 3/8" Demi Bullnose

206.00 183.00 126.00 196.00 147.00

SIS-VBRBE34 SIS-VBRBE38 SIS-VBRBE58

3/4" Bevel 3/8" Bevel 5/8" Bevel

206.00 136.00 168.00

PART # SIS-VBRBF1 SIS-VBRBF34 SIS-VBRBV1316 SIS-VBRBV158 SIS-VBRBV34 SIS-VBRBZ138

DESCRIPTION

PRICE $

1" Ogee 3/4" Ogee

222.00 194.00

1-3/16" Full Bullnose 1-5/8" Full Bullnose 3/4" Full Bullnose 1-3/8" Full Bullnose

206.00 314.00 206.00 136.00

ROUTER BITS AND PROFILING TOOLS Profiling Bits • These Vacuum Brazed Profilers with internal water feed are designed for edge profiling on granite, engineered stone, concrete, crystallized glass and porcelain slabs

• 5/8” - 11 Arbor • Wet cutting • Max RPM: 3,500 • Nylon Guide

Demi Bullnose

Hollywood Bevel

Ogee

4 5 4 5

Hollywood Bevel

F Ogee Breaker

Recessed Base

9 7

Proﬁler V-Series - Create the Perfect Bullnose Edge Every Time RE Reverse-Bevel

Full-Bullnose

Straight

8 8

Proﬁler B-Series - Create the Perfect Demi Bullnose Edge Every Time

1 1 1 1

9 9

Half Bullnose Wheels

SINTERED

SEGMENTED

• Superior quality and consistent performance. • Made with brass core for faster cutting speed while holding onto their shape longer. • Custom proﬁle bits made in 1 - 2 weeks.

• Ideal for Quartzite, Granite, and Engineered Stone. • Super fast cutting, long lasting, with minimal chipping. • Can be used on its own to achieve the ﬁnal proﬁle.

$368.00 $368.00 $368.00

40 • 4cm OCE-22501-01374 Pos.0 40 • 4cm OCE-22501-01155 Pos.1 40 • 4cm OCE-22501-01156 Pos.2

$480.00 $436.00 $436.00

A • R 1/4’’

30 • 3cm OCE-22501-01653 Pos.0 30 • 3cm OCE-22501-01007 Pos.1 30 • 3cm OCE-22501-01008 Pos.2

A • R 3/8’’ 20 • 2cm • R 3/8’’ OCE-22501-01003 Pos.1 $198.00 20 • 2cm • R 3/8’’ OCE-22501-01005 Pos.2 $198.00

B OCE-22501-01010 Pos.1 OCE-22501-01011 Pos.2

$218.00 $218.00

15 • 1.5cm OCE-22501-01357 Pos.0 15 • 1.5cm OCE-22501-01012 Pos.1 15 • 1.5cm OCE-22501-01013 Pos.2

$236.00 $236.00 $236.00

20 • 2cm 20 • 2cm 20 • 2cm

OCE-22501-01270 Pos.0 OCE-22501-01014 Pos.1 OCE-22501-01015 Pos.2

$248.00 $238.00 $238.00

25 • 2.5cm OCE-22501-01210 Pos.0 25 • 2.5cm OCE-22501-01209 Pos.1 25 • 2.5cm OCE-22501-01187 Pos.2

$312.00 $312.00 $312.00

30 • 3cm 30 • 3cm 30 • 3cm

$368.00 $352.00 $352.00

E 10 • 1cm 10 • 1cm

OCE-22501-01342 Pos.1 OCE-22501-01420 Pos.2

$178.00 $178.00

15 • 1.5cm OCE-22501-01162 Pos.1

$198.00

20 • 2cm 20 • 2cm 20 • 2cm

OCE-22501-01290 Pos.0 OCE-22501-01019 Pos.1 OCE-22501-01159 Pos.2

$252.00 $252.00 $252.00

30 • 3cm 30 • 3cm 30 • 3cm

OCE-22501-01409 Pos.0 OCE-22501-01020 Pos.1 OCE-22501-01111 Pos.2

$308.00 $308.00 $308.00

$496.00 $484.00 $484.00

F+V 30 • 3cm 30 • 3cm

OCE-22501-01099 OCE-22501-01105

Pos.1 Pos.2

$612.00 $612.00

40 • 4cm 40 • 4cm

OCE-22501-01224 OCE-22501-01264

Pos.1 Pos.2

$680.00 $680.00

20 • 2cm • R 1/4’’ OCE-22501-01001 Pos.1 $198.00 20 • 2cm • R 1/4’’ OCE-22501-01002 Pos.2 $198.00

OCE-22501-01291 Pos.0 OCE-22501-01016 Pos.1 OCE-22501-01017 Pos.2

B+B

1 30 • 3cm OCE-22501-01344 Pos.0 30 • 3cm OCE-22501-01173 Pos.1 30 • 3cm OCE-22501-01174 Pos.2

10 • 1cm 10 • 1cm

• Fits Master-3500, Sector, Magnum, and other standard routers. • Adapters available for use with our router bits on FLEX routers, wood routers, or machines with 5/8"-11 spindle.

OCE-22501-01053 OCE-22501-01054

Pos.1 Pos.2

$316.00 $316.00

25 • 2.5cm OCE-22501-01204 25 • 2.5cm OCE-22501-01369

Pos.1 Pos.2

$350.00 $350.00

30 • 3cm 30 • 3cm

Pos.1 Pos.2

$412.00 $412.00

OCE-22501-01057 OCE-22501-01113

Pos.1 Pos.2

$336.00 $336.00

25 • 2.5cm OCE-22501-01058 25 • 2.5cm OCE-22501-01149

Pos.1 Pos.2

$350.00 $350.00

30 • 3cm 30 • 3cm

Pos.1 Pos.2

$412.00 $412.00

20 • 2cm 20 • 2cm

OCE-22501-01055 OCE-22501-01056

Q 20 • 2cm 20 • 2cm

15 • 1.5cm OCE-22501-01021 Pos.1 15 • 1.5cm OCE-22501-01096 Pos.2

$250.00 $250.00

20 • 2cm 20 • 2cm 20 • 2cm

OCE-22501-01260 Pos.0 OCE-22501-01025 Pos.1 OCE-22501-01031 Pos.2

$240.00 $218.00 $218.00

25 • 2.5cm OCE-22501-01138 Pos.0 25 • 2.5cm OCE-22501-01034 Pos.1 25 • 2.5cm OCE-22501-01035 Pos.2

$294.00 $294.00 $294.00

20 • 2cm 20 • 2cm 20 • 2cm

OCE-22501-01440 Pos.0 OCE-22501-01062 Pos.1 OCE-22501-01063 Pos.2

$360.00 $342.00 $342.00

30 • 3cm 30 • 3cm 30 • 3cm

$334.00 $304.00 $304.00

30 • 3cm 30 • 3cm 30 • 3cm

OCE-22501-01122 Pos.0 OCE-22501-01065 Pos.1 OCE-22501-01068 Pos.2

$370.00 $370.00 $370.00

40 • 4cm 40 • 4cm 40 • 4cm

OCE-22501-01119 Pos.0 OCE-22501-01072 Pos.1 OCE-22501-01074 Pos.2

$390.00 $390.00 $390.00

50 • 5cm 50 • 5cm

OCE-22501-01076 Pos.1 OCE-22501-01077 Pos.2

$648.00 $648.00

60 • 6cm 60 • 6cm

OCE-22501-01078 Pos.1 OCE-22501-01079 Pos.2

$790.00 $790.00

40 • 4cm 40 • 4cm 40 • 4cm

OCE-22501-01201 Pos.0 OCE-22501-01212 Pos.1 OCE-22501-01266 Pos.2

OCE-22501-01292 Pos.0 OCE-22501-01038 Pos.1 OCE-22501-01040 Pos.2

FV 30 • 3cm 30 • 3cm

OCE-22501-01102 OCE-22501-01112

Pos.1 Pos.2

$418.00 $418.00

H 15 • 1.5cm 15 • 1.5cm

OCE-22501-01044 OCE-22501-01045

Pos.1 Pos.2

$250.00 $250.00

20 • 2cm 20 • 2cm

OCE-22501-01046 OCE-22501-01143

Pos.1 Pos.2

$250.00 $250.00

30 • 3cm 30 • 3cm

OCE-22501-01047 OCE-22501-01088

Pos.1 Pos.2

$294.00 $294.00

L-20 20 • 2cm 20 • 2cm

OCE-22501-01059 OCE-22501-01060

Z $240.00 $240.00 $240.00

CUSTOM PROFILES AVAILABLE

OCE-22501-01049 Pos.1 $218.00 OCE-22501-01084 Pos.2 $218.00

20 • 2cm • R15 OCE-22501-01330 Pos.1 $324.00 20 • 2cm • R15 OCE-22501-01361 Pos.2 $324.00 30 • 3cm 30 • 3cm

OCE-22501-01195 Pos.1 $336.00 OCE-22501-01219 Pos.2 $336.00

OCE-22501-01172 OCE-22501-01081

Single Breaker Double Breaker 2-3-4cm

$170.00 $298.00

STONE VACUUM LIFTERS Stone Vacuum Lifter 25 • Designed for lifting, moving or installing medium to extra large slabs • Superior vacuum lifter will satisfy a wide range of customer requirements • The one rubber vacuum suction pads protect slabs from scratching during handling • Suction pressure ensures stability and prevents the slab from sliding or falling down • Its also able to incline vertically 0 - 90 degrees

ABA-SVL25-B

Black

1,920.00

ABA-SVL25-W White

Stone Vacuum Lifter 50 • Designed for lifting, moving or installing medium to extra large slabs • Superior vacuum lifter will satisfy a wide range of customer requirements • The two rubber vacuum suction pads protect slabs from scratching during handling • Suction pressure ensures stability and prevents the slab from sliding or falling down

ABA-SVL50-B

Black

3,075.00

ABA-SVL50-W White

Stone Vacuum Lifter 75 Abaco Machines Vacuum Lifter AUS-SVL50 is designed to lift smooth surfaced stone with compressed air power with a lifting capacity of 500kg. It features robust construction with ability to lift and to tilt the stone.

ABA-SVL75-B

Black

1653

264

3 pcs

52’’ x 28-3/8’’

-0.7 to -0.8 kg/cm2 2,949.00

Stone Vacuum Lifter 100 • Designed for lifting, moving or installing medium to extra large slabs • Superior vacuum lifter will satisfy a wide range of customer requirements • The four rubber vacuum suction pads protect slabs from scratching during handling • Suction pressure ensures stability and prevents the slab from sliding or falling down • Its also able to incline vertically 0 - 90 degrees • The weight of the SVL cart: 44 lbs (20 kg)

ABA-SVL100-B Black

3,355.00

ABA-SVL100-W White

3,619.00

SPREADER BEAMS Spreader Bar M1 Abaco Spreader Bar M1 is speciﬁcally designed for the stone industry. Combined with endless slings, it has the ability to roll the slab over. The slings are suspended on crowned aluminum rollers which can be adjusted from 17-3/8” to 56-3/4”.

ABA-ASB056M1

59-1/2’’

4-3/8’’

Net Height

W.L.L. of fabric straps (set of 2)

Length Range

88 lbs

3300 lbs

17-3/8’’ - 56-3/4’’

39-3/8’’

539.00

ABA-ASB056M1001: Strap For Spreader Bar $95.00

Spreader Beam M3 • Spreader Beam M3 combines with the forklift truck to move a large slab safety and quick manner. • The chain system is designed for safety and convenient operation. • The beam comes with 4 preset belt spaces

ABA-ASB056M3

55-1/8’’

3-3/8’’

Net Height

W.L.L. (set of 2)

Distance between chains

85 lbs

3300 lbs

30-3/4’’ - 49-5/8’’

12-5/8’’

535.00

Spreader Bar M4 Abaco Spreader Beam M4 can be combined with scissor clamps to move a large slab in a safe and quick manner. The beam comes with 4 preset holes.

ABA-ASB056M4

55-7/16’’

3-3/8’’

Net weight

W.L.L.

Distance between chains

45 lbs

2200 lbs

30-3/4’’ - 49-5/8’’

13-1/4’’

475.00

ABA-ASB056M4SET - Spreader Bar M4 with 02 ABA-SC150 (Page 60) $1,125.00

Spreader Beam M6 Abaco Spreader Beam M6 has a convenient and effective design where straps can easily be hooked onto the beam at each designated slot for moving large slabs of 10,020 lbs safely. Net weight ABA-ASB106M6

106-1/4’’

4-3/8’’

19-1/6’’

95 lbs

W.L.L.

7800 lbs

8250 lbs

8697 lbs

9130 lbs

9560 lbs

10000 lbs

Distance between chains

104-3/4’’

95-1/4’’

85-7/8’’

76-3/8’’

67’’

57-1/2’’

575.00

Spreader Beam M7 Spreader Beam M7 is made of steel and has 3 hand clamp positions. Suitable for even wide stone sizes.

ABA-ASB106M7

70-1/2’’ - 106-1/4’’

9-7/8’’

ABA-ASB106M2001 - Straps for Spreader Beam $130.00

17’’

Net weight

W.L.L.

220 lbs

3300 lbs - 11000 lbs

709.00

SCISSOR CLAMPS AND LIFTERS Spreader Bar M9 Abaco Spreader Bar M9 combines with the forklift truck to move a large slab safety and quickly. Chain system is designed for safety and convenient operating.

ABA-ASB84M9

Net Height

W.L.L. of fabric straps (set of 2)

385 lbs

17600 lbs

84-1/4’’ 4-15/16’’ 24-5/16’’

597.00

Note: Steel chain not included

Scissor Clamp

PART #

Length

Width

Height

Grip Range

Clamp Weight

W.L.L

PRICE $

ABA-SC350

23-5/8”

10-3/16”

20-1/2”

6” - 13-3/4”

116-5/6 Lbs

3527 Lbs

$550.00

Double Scissor Clamp

PART #

Length

Width

Height

Grip Range

Net Weight Per Pair

ABA-ADSC20

57-1/2”

10-1/4”

24-3/4”

1/4-3/4”

95 Lbs

W.L.L Per Pair PRICE $ 1000 Lbs

726.00

New Generation Cable Lifter • It incorporates the proven “Clamping Principle”. The slab will not SLIP, SNAP, CRACK, or BREAK • Vertical, ﬂexible, safe, swivel hook Model ABA-NGL-30-B

Black

7-1/2’’

7-5/8’’

21-1/4’’

3/8’’ - 1-1/8’’

51 Lbs

2640 Lbs

629.00

ABA-NGL-40-B

Black

7-1/2’’

8’’

21’’

3/8’’ - 1-5/8’’

56 Lbs

2640 Lbs

632.00

ABA-NGL-50-B

Black

7-1/2’’

8’’

21-1/4’’

5/8’’ - 2’’

56 Lbs

2640 Lbs

635.00

ABA-NGL-60-B

Black

8-1/2’’

10’’

22-5/8’’

3/4’’ - 2-3/4’’

74 Lbs

2640 Lbs

793.00

ABA-NGL-75-B

Black

8-1/2’’

10-5/8’’

22-5/8’’

1’’ - 3’’

74 Lbs

2640 Lbs

799.00

ABA-NGL-50-W

White

7-1/2’’

8’’

21-1/4’’

5/8’’ - 2’’

56 Lbs

2640 Lbs

715.00

ABA-NGL-60-W

White

8-1/2’’

10’’

22-5/8’’

3/4’’ - 2-3/4’’

74 Lbs

2640 Lbs

865.00

ABA-NGL-75-W

White

8-1/2’’

10-5/8’’

22-5/8’’

1’’ - 3’’

74 Lbs

2640 Lbs

875.00

STONE LIFTERS Little Giant Lifter • The compact design of the Little Giant Lifter will help solve the problem where head room is an issue • Strong & Secure, Strong Lifting Pin, Lower Overall Height, Straight Lift, Large Grip Range • Includes Swivel Shackle • Available with either black or white rubber

Model ABA-ALG30-B

Black

ABA-ALG40-B

Black

485.00 8-1/2’’

14-1/8’’

3/8’’ - 1-1/2’’

48.5 Lbs

599.00 605.00

6-1/8’’

Black

ABA-ALG30-W

6’’

Black

660.00

Black

669.00

White

545.00

White

679.00

White

745.00

White

755.00

Scissor Clamp Durable, fully vulcanized rubber pads. All natural rubber provides a better grip and protection across the jaws to prevent chipping. Swivel Eye and Bow Shackle included.

ABA-SC100-AL

Black

335.00

ABA-SC100-AL-W

White

339.00

ABA-SC100-ML

Black

307.00

ABA-SC150

Black

370.00

ABA-SC150-W

White

439.00

Arcturus Lifter

ABA-ARL50 ABA-ARL100

12-1/8’’

6-1/4’’

18’’

3/8’’ - 2’’

40 Lbs

1650 Lbs

485.00

A-FRAMES Economy A-frame

ABA-ESAF060 ABA-ETAF060

Standard A-frame

ABA-SAF060 ABA-TAF060 ABA-TAF060-01

Cross bar and Bolts for Truck A-Frame (and Economy Truck A-Frame)

79.00

Heavy Duty Truck A-frame

ABA-TAF60H

One Stop A-frame

ABA-OSA7247 ABA-OSA7263 ABA-OSA8763 ABA-OSA9679

94-1/2’’

47-1/4’’

93-11/16’’

594 Lbs

604 Lbs

2,209.00

A-FRAMES One Stop A-frame Pro

ABA-OSA7247PRO ABA-OSA7263PRO ABA-OSA8763PRO

One Stop High A-frame

ABA-OSHA7236

One Stop Single Sided A-frame Sturdy design prevents tipping. Rubber straps on back and bottom protect material. Two ratchet securing bars to keep material in place. Four casters allow for easy movement around the shop

ABA-SSA7247 ABA-SSA7247-W

Bi-level A-frame

ABA-OSA7267-2T

1,355.00

TABLES Fabrication Stand

ABA-AFS3139

Black

ABA-AFS3139-W

White

319.00

Processing Table

ABA-KPT8340

Black

ABA-KPT8340-W

White

1,185.00

Working Table

DESCRIPTION ABA-AWT7523

Without Caster

ABA-AWT7523C

With Caster

ABA-AWT7523CW

With Caster White Rubber

815.00

Foldable Table Support • Foldabale Table FT7923 is to be used for supporting the slabs during machining, cutting, grinding, polishing or drilling. • The height is adjustable from 32 5/8" to 44 1/4". • Articulated connecting links make it possible to adjust the table width exactly to ﬁt to the variations of your slabs.

ABA-AFT7923

14-3/8’’ - 74-3/4’’

23-5/8’’

32-5/8’’ - 44-1/4’’

92.4 Lbs

969.00

Tilt-A-Slab • Table platform is 10" x 6 • Safe and easy one-man tilt operation • Slab length adjustment position pegs allow for different height of stone • More info and videos at www.rye-corp.com PART #

PRICE $

RYE-TILT-A-SLAB

3,400.00

CARTS AND DOLLIES Safety Slab Dolly Pneumatic tires are designed to withstand vibration to prevent breakage. The safety lever is removable for easy storage. Grip Range ABA-SSD-35

35-7/16’’

20-1/2’’

64-15/16’’

3/8-4’’

1000 Lbs

62 Lbs

399.00

42 Lbs

53 Lbs

265.00

8 Inch & 11 Inch Slab Dollies

ABA-SD008 ABA-SD011

Long Slab Dolly

ABA-LSD012

3 Wheel Dollies

ABA-SD013 ABA-GD013 27-5/8’’ 14-3/8’’ 13-3/4’’

4 Wheel Dollies

ABA-SDS003 ABA-GDS003

4-3/4’’

880 Lbs

CARTS AND DOLLIES Self-locking Dollies

ABA-SLT13M2 ABA-SLT13M3 ABA-SLT13M4

Slab Buggy & Double-Sided Slab Buggy

Rubber ABA-SBG800

Black

ABA-SBG800-W

White

ABA-DSBG1320

Black

ABA-DSBG1320-W

White

Universal Slab Buggy Universal Slab Buggy transports slabs safety and easily. It is big enough to handle large slabs, but small enough to ﬁt through standard doors. Iron core polyurethane casters enable maximum stability. The four high quality polyurethane swivel casters, including brakes, allow quick and easy maneuvering. Not only can you transport slabs with ease, but it includes our one of a kind securing arms for added versatility.

Description ABA-USB-6WM

Medium

59-1/6’’

28-3/4’’

58-7/16’’

220 Lbs

2200 Lbs 1,125.00

ABA-USB-6WL

Large

70-7/8’’

33-7/16’’ 67-11/16’’

242 Lbs

2200 Lbs 1,235.00

ABA-USB-6WL-W

Large White Rubber

70-7/8’’

33-7/16’’ 67-11/16’’

242 Lbs

2200 Lbs 1,285.00

CARTS AND DOLLIES Elevating Hand / Winch Cart

ABA-EHC3541 ABA-EWC3541

V-cart

ABA-AVC3747

Dry Wall Cart • Designed for easy maneuvering of slabs, glass sheets and wood panels through a conﬁned space. • Light structure but sturdy and extremely durable. • Rubber lining protects the materials from sliding and chipping. • Caster brakes prevent the cart from moving.

Holding Capacity ABA-DWC120

47-1/4’’

25-7/16’’

47-15/16’’

117 Lbs

3000 Lbs

805.00

ABA-DWC180

74-7/8’’

28-3/8’’

47-11/16’’

203 Lbs

3000 Lbs

1,100.00

Dry Wall Carts

1 • 4’’ - 8” Polyoleﬁn Wheels,

2 • Constructed from high-capacity steel

2 Swivel and 2 rigid • Fully welded frame • Great for small work areas • Made in USA

PART #

• Pro-grade, non-marring, 8” casters that roll smoothly even under heavy loads; it features a tight-turning radius with two swivel casters, as well as a wheel brake for safety • 2 - 8" Fixed casters • 2 - 8" Swivel casters (1 with brake) Size

Weight Capacity

PRICE $

PICTURE

SIS-CART&CASTER

20” X 47” X 48”

2000lbs

295.00

SIS-CART02

23" x 45" x 47"

1800lbs

225.00

BOOMS Swing Arm Forklift Boom Designed for use on 4400-7716 lbs forklift trucks. This product is best for stone and glass.

ABA-AFJS-25

Forklift Boom Designed for use on 4400-7716 lbs forklift trucks. Forklift Boom offers versatility with maximum visibility for the operator. When fully extended, the Ausavina Forklift Boom reaches up to 94 ½”.

ABA-AFJ-25

Double Forklift Boom Designed for lifting crated slabs of marble and granite from closed top containers. It has the ability to lift stone slab bundles securely.

ABA-ADFB30

105-3/4’’

40-5/16’’

13-15/16’’

6600 Lbs

1100 Lbs

1120 Lbs

6,095.00

ABA-ADFB50

120-3/8’’

58-1/4’’

16-1/16’’

6600 Lbs

1760 Lbs

1800 Lbs

6,305.00

RACKS Rhino Rack

Set with 2 bases and 8 poles

ABA-RSR010 ABA-RSR10R

RACKS Slab Rack Set with 2 bases and 20 poles

DESCRIPTION ABA-SRK010 ABA-SRK10R

Without Rubber Lining With Rubber Lining

1,963.00

Bundle Rack Set with 2 bases and 8 poles

ABA-BSR010

Remnant Rack Set with 2 bases and 20 poles

ABA-RES27

Display Rack

ABA-DSR7023C

SINK LOCKS Sink Locks

Rubber

ABA-SLS24

Black

ABA-SLS48

Black

ABA-SLS24-W

White

125.00

ABA-SLS48-W

White

235.00

CLAMPS AND SINK SETTERS Carry Clamps SINGLE HANDED CARRY CLAMPS Safe to use, portable, convenient and affordable. Designed to safely lift and carry stone slabs in an upright position. Because single-handed carry clamps only require one hand from each person, two men can easily lift and position heavy slabs. Rubber padded jaws are vulcanized to increase grip pressure and protect slabs from scratching. The handle is also rubber padded for added comfort. These are the most versatile clamps. DOUBLE-HANDED CARRY CLAMPS Designed for safely lifting and transporting stone slabs without using a forklift truck. The fully vulcanized rubber pads provide added grip and prevent damage to the slabs. The weight of the slab exerts a sufﬁcient clamping force for such a simple lifting device. By eliminating the use of a forklift truck, the Carry Clamps help user work more efﬁciently. You can use multiple Carry Clamps to move larger slabs with ease.

Description ABA-SHC25

Black Rubber

ABA-ACC40

Black Rubber

295.00

ABA-SHC25-W

White Rubber

169.00

ABA-ACC40-W

White Rubber

315.00

ABA-ACC40C-W

White Rubber with yellow bag

349.00

90 Degree Clamps Designed for perfect positioning and locking fascia (apron) to your countertop via mitre joints. Its adjustable jaw allows to hold various heights and thicknesses. By combining two or more 90 degree clamps, longer lengths can be accommodated. Description ABA-A90C-M3

Without Yellow Bag

239.00

ABA-A90C-M3C

With Yellow Bag

269.00

ABA-A90C-M3C-W

With Yellow Bag White Rubber

309.00

Ratchet Seam Setters

Rubber ABA-ARS-1

Black

ABA-ARS-2

Black

ABA-ARS-3

Black

ABA-ARS-2-W

White

425.00

ABA-ARS-3W

White

405.00

ABA-ARS-3WN

White with Handle Screw

420.00

CLAMPS, DUMPTERS AND ACCESSORIES Sink Hole Support System

Rubber ABA-SH83

Black

ABA-SH83-W

White

869.00

Lamination Clamps

Rubber ABA-LC30

Black

ABA-LC60

Black

ABA-LC90

Black

ABA-LC120

Black

ABA-LC180

Black

ABA-LC180-W

White

Dumpster

ABA-CD70 ABA-CD102

Forklift Extensions

ABA-AFE083

355.00

ACCESSORIES Swivel Shackle

Bow Shackle

• Comes standard with Little Giant Lifters • Allows for rotations of material • Can be used with Abaco forklift booms

• Ideal for straight lifts where rotation is not an issue • Can be used with Abaco forklift booms and lifters

ABA-SWS-02

ABA-ABS22

Cable Connect Sling

Locking Set

• Allows for extra lifting room • Can be used with Abaco forklift booms and lifters Torsion spring and bolt for the Abaco lifters. Comes with: Red latch, spring, bolt, nut.

ABA-ASL017

ABA-ALG026

39.00

Slab Edge Guards • Temporarily support countertops, stone panels, etc. to avoid breaking, chipping and scratching • Simple, effective, and easy to use • Compact, lightweight and easy to carry around Rubber ABA-SEG20-B

Black

ABA-SEG30-B

Black

ABA-SEG40-B

Black

ABA-SEG20-W

White

ABA-SEG30-W

White

ABA-SEG40-W

White

The Wedgee

Tie Down Straps

Safety Tool

Decrease the likelihood of employee injuries or even fatalities with this simple means of creating and maintaining space between slabs. Whether slabs are 2 or 3cm, by using The Wedgee spacer the slab clamp can be easily inserted without risk of being caught in what OSHA calls the “Fall Shadow Zone”. Help implement simple safety for your valued employees.

SIS-WEDGEE-01

29.95

Easily adjustable to secure loads to truck beds, roof racks and trailers; Ratchet handle makes it easy to adjust the length on the web straps; Handle lever lets you pull the straps tight; Vinyl covered S-hooks to prevent marring on painted surfaces; Rubberized handle and release; Weather resistant. PART# Size Breaking Strength (Lbs) Work Capacity (Lbs) Ratchet Breaking Strength (Lbs) Ratchet Working Capacity (Lbs) Length Adjusts From PRICE $

HARD-47708 1” x 15' 1500 500 900 300 4' To 15' 6.95

HARD-47764 2” x 20' 2500 833 3000 1000 4" To 20' 18.95

OMNI CUBED PRODUCTS Pro-cart At1 2014

PART # OC-PCAT1-14 OC-PCAT1-FK-14 OC-PCAT-TT OC-PCAT1-MTA *sold in pairs

DESCRIPTION

PRICE $

Pro-Cart AT1 725.00 Pro-Cart AT1 Folding Kit* 80.00 Pro-Cart Tool Tray Accessory (For AT1 and AT2 Pro-Carts)* 175.00 Pro-Cart At1 Multi-Top Accessory 185.00

Pro-cart At2 2014

PART # OC-PCAT2-14 OC-PCAT-TT

DESCRIPTION

PRICE $

Pro-Cart AT2 Pro-Cart Tool Tray Accessory (For AT1 and AT2 Pro-Carts)*

Pro-Dollyâ&#x201E;¢ HD1

PART #

DESCRIPTION

PRICE $

OC-PDHD1

Pro-Dolly HD1

375.00

1,150.00 175.00

OMNI CUBED PRODUCTS Pro-Dolly™ HD2

PART #

DESCRIPTION

PRICE $

OC-PDHD2

Pro-Dolly HD2

635.00

Pro-Lift Automatic The Pro-Lift Automatic has been designed to provide a much safer method of lowering, transporting, and lifting very heavy and tall countertops. Unloading large countertops from trucks (and off the A-frame), lowering the piece to the ground, rolling to the site, and raising the countertop for ﬁnal placement is made much safer, faster, and easier with the Pro-Lift. The cart secures tops up to 115 mm (4.5 inches) thick, transports pieces weighing up to 1,000 pounds, and has a lift height of 45 inches (from ground to support rail surface). With the powered lift feature, the cart also enables steady and controlled tipping/tilting of large countertops onto cabinets. The cart has been engineered for optimum stability and easy maneuverability, yet is still lightweight enough (only weighs 74 pounds) to be easily picked up and stored in vehicles. The cart is powered by a long-lasting and durable 28 volt lithium-ion rechargeable tool battery. Added features such as the wireless remote, countertop clamp, integrated kickbrake, and ﬂat-free tires make this cart easy, safe, and convenient to use.

DESCRIPTION Pro-Lift Automatic Installation Cart

OMNI CUBED PRODUCTS Lam-Clamp Lamination Clamp The Lam-Clamp™ has revolutionized countertop edge laminations by exceeding traditional methods in efﬁciency, seam quality, and durability. The Lam-Clamp's patented design features hidden clamp threads, which protects them from epoxy contamination, so they outlast any other clamps on the market. Available in six sizes for truly customizable application. The shorter lengths wrap easily around curved edges, while the longer lengths are ideal for speed and efﬁciency.

PART #

DESCRIPTION

QTY

PRICE $

OC-2100-LC OC-3100-LC OC-4100-LC OC-6100-LC OC-A100-040 OC-A100-045

2’ Lam-Clamp 3’ Lam-Clamp 4’ Lam-Clamp 6’ Lam-Clamp 10’’ Lam-Clamp 5’’ Lam-Clamp

1 1 1 1 10 10

135.00 175.00 225.00 295.00 375.00 350.00

OC-Clamp-LC

LC Clamp Assembly

34.00

Aqua-Jaw™ Carry Vise™

Mega-Jaw™ Carry Clamp™

The Aqua-Jaw™ Carry Vise™ promotes safer, more ergonomic lifting and moving to reduce strain and injury. This is the only all-weather carrying clamp designed to not slip off wet stone, and its super-strong vise action allows carrying stone up stairs and other slanted or challenging terrains. Aqua-Jaws are the highest capacity carry clamps on the market, accommodating up to 800 pounds per pair. The clamps open wide (to 4.25") for thick edges and miters, and have an optional Handle Kit which allows four people to share the load of heavy stone. Dual quick-spin tightening handles easily secure the product in place, and rubber-lined gripping rails protect tops from scratches.

The Mega-Jaw Carry Clamp is designed for easier and safer carrying of countertops. The lightweight clamp (only 2.6 pounds) opens wide enough to accommodate tops up to 2.6" (66mm) thick. The clamps distribute the weight to both arms, reducing worker strain and enabling the safe and easy lifting of heavy pieces. The clamp features high-strength aluminum arms, and non-marking, tear resistant rubber gripping pads, and the clamps grip tighter as more weight is lifted. • Max lifting capacity 500 lbs per pair. • Tear resistant, silicone rubber gripping pads won’t mark or stain surfaces

• Optional Handle Kit (add 2 handles to each clamp enabling four people to share the load. One set includes four handlesenough for two vises.

PART #

DESCRIPTION

PRICE $

OC-AJ-128-15 Aqua-Jaw Carry Vise (set) 550.00 OC-AJ-128-HK-15 Aqua-Jaw Handle Kit (4 extra handles) 60.00

PART # OC-MJ-126-15

DESCRIPTION

PRICE $

Mega-Jaw Carry Clamp (set)

275.00

OMNI CUBED PRODUCTS Sink Holer Saver™ EDGE The NEW Sink Hole Saver™ Edge is the perfect solution for protecting cutouts, backsplashes, and other fragile pieces during fabrication, transportation, and installation. The mechanical clamps have been reengineered for improved functionality, featuring a wider clamping range, enhanced tightening knobs, and new rubber bumper guards to protect ﬁnished edges. The clamps securely grip material edges and slide in the stiffening rail for custom placement. Easy-grasp knobs make attachment and tightening quick and effortless. It is available in three lengths, and can be used with the Angle Bracket accessory for a variety of applications. PART #

DESCRIPTION

PRICE $

OC-4101-SHSE-17 OC-6101-SHSE-17 OC-8101-SHSE-17

4’ Sink Hole EDGE *2017 Model* 6’ Sink Hole EDGE *2017 Model* 8’ Sink Hole EDGE *2017 Model*

245.00 325.00 365.00

Sink Holer Saver™ MANUAL A surface-mounted reinforcement system that strengthens fragile materials during lifting, transportation, and installation. This product features proprietary, non-marking vacuum cups with triple sealing rings for a strong, reliable hold—even on textured and leathered surfaces. Red-color indicators on thumb pumps allow monitoring vacuum pressure at a glance, and the cups can be re-pumped in place without loss of remaining suction. New knurled lock-knobs allow quick repositioning of cups around cutouts. Available in three lengths, with three optional accessories (Angle Bracket, Vertical Lifting Handle Kit, and Extension Bracket Kit).

PART #

DESCRIPTION

PRICE $

OC-4149-SHSM-17 OC-6149-SHSM-17 OC-8149-SHSM-17

4’ Sink Hole MANUAL *2017 Model* 6’ Sink Hole MANUAL *2017 Model* 8’ Sink Hole MANUAL *2017 Model*

250.00 350.00 395.00

Sink Holer Saver™ AUTO The Sink Hole Saver™ Auto features a stronger vacuum pump with greater airﬂow rate than previous models. The pump runs on an all-new 12V Li-ion Rechargeable Power Pack that lasts up to 5 hours on a single charge, with an LCD display showing the remaining power level, so you never have to wonder if your battery will last through another install. Quick-release valves make product removal fast and easy, and new knurled lock-knobs allow quick repositioning of cups around cutouts. Available in three lengths, with two optional accessories (Angle Bracket and Vertical Lifting Handle Kit).

PART #

DESCRIPTION

PRICE $

OC-4149-SHSA-17 OC-6149-SHSA-17 OC-8149-SHSA-17

4’ Sink Hole AUTO *2017 Model* 6’ Sink Hole AUTO *2017 Model* 8’ Sink Hole AUTO *2017 Model*

595.00 695.00 745.00

OMNI CUBED PRODUCTS Sink Holer Saver™ Accessories Edge Clamp

Angle Bracket

The NEW Sink Hole Saver™ Edge Clamp Assembly has a wider clamping range, enhanced tightening handles, and new rubber bumper guards to protect ﬁnished edges. This clamp is compatible with any Sink Hole Saver™ stiffening rail.

The Sink Hole Saver™ Angle Bracket connects two Sink Hole Savers to create a rigid joint at any angle up to 270° for safe transportation of uniquely shaped countertops.

PART #

DESCRIPTION

OC-CLAMP-SHSE-17 Sink Hole Saver Edge Clamp

PRICE $

PART #

DESCRIPTION

PRICE $

65.00

OC-AB-SHS

Sink Hole Saver Angle Bracket

110.00

Vacuum Cup Assembly

Extension Bracket Kit

The NEW Sink Hole Saver™ Vacuum Cup Assembly features a proprietary, non-marking vacuum cup with triple sealing rings for a strong, reliable hold—even on textured and leathered surfaces. This cup assembly is compatible with any Sink Hole Saver™ stiffening rail.

The NEW Sink Hole Saver™ Extension Bracket Kit combines two Sink Hole Saver™ Manuals into one adjustable-length rail for greater versatility and convenience.

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

OC-CUP-SHSMA-17

Vacuum Cup Assembly

75.00

OC-SHS-EB-17

Extension Bracket Kit

65.00

Rechargeable Power Pack Kit

Vertical Lifting Handle Kit

The NEW Rechargeable Power Pack features a 12V Li-ion battery that lasts up to 5 hours on a single charge, and has an LCD display showing the remaining power level, so you never have to wonder if your battery will last through another install. The Rechargeable Power Pack is compatible with any Omni Cubed vacuum pump.

The NEW Sink Hole Saver™ Vertical Lifting Handle Kit attaches to vacuum cup Sink Hole Savers to make vertical panel installations safer, faster, and easier.

PART #

DESCRIPTION

PRICE $

OC-RPP300-KIT-17

Rechargeable Power Pack Kit

185.00

PART # OC-SHS-LH-17

Sink Hole Saver Model

Pump Kit

PRICE $

Vertical Lifting Handle Kit

60.00

Extension Bracket Kit

Angle Bracket

AUTO MANUAL EDGE ORIGINAL

PREVIOUS MODELS

VCA VCM

Vertical Lifting Handle Kit CURRENT MODELS

The NEW Sink Hole Saver™ Pump Kit features a more durable, compact vacuum pump with a greater airﬂow rate than previous models. The pump also has an improved external housing to be more resistant to overheating, dust, and debris.

DESCRIPTION

PART #

DESCRIPTION

PRICE $

OC-VMP700-KIT-17

Sink Hole Saver Pump Kit

185.00

VC2 Fully compatible

Limited compatibility*

Not Compatible

*With certain models and rail length combinations, extension and collapsibility limitations may apply.

OMNI CUBED PRODUCTS Seam Setter VCA The automatic Seam Setter VCA joins and levels stone to deliver high-quality, even seams. The product's open design allows you to work on the seam while in use; removal is not needed to apply epoxy or scrape the seam. A powerful compact vacuum pump maintains pressure for all cups, and runs on AC power or AA batteries for any install situation. Improved pump technology provides a stronger hold to very textured or porous materials. The 6" vacuum cups feature a continuous seal, so they won't lose suction if loss of power occurs. Four seam levelers slide on rails for custom placement and have vinyl-capped, non-spinning feet to prevent scratches. Recommended for porous and non-porous materials. • Multi-Seam Expansion Kit allows you to set two seams at the same time (up to 14 feet apart!), or chain-link” four seam setters for very long seams • NEW and improved Vacuum Pump Kit can be used to equip previous model seam setters with the latest pump technology

Seam Setter VCM The Seam Setter VCM joins and levels stone to deliver high-quality, even seams. The product's open design allows you to work on the seam while in use; removal is not needed to apply epoxy or scrape the seam. The 6" vacuum cups feature a continuous seal for a reliable hold on heavy stone. Two seam levelers slide on rails for custom placement and have vinyl-capped, non-spinning feet to prevent scratches. The pump plungers have an indicator to alert user if re-pumping is needed, and can be re-pumped without removal or loss of suction. Use alone for short seams, or in pairs for longer seams. Recommended for non-porous materials. PART # OC-6110-VCA-600 OC-6110-VCA-EXP OC-VMP600-KIT OC-66110-VCM

DESCRIPTION

PRICE $

Seam Setter VCA, Automatic *6" Cups Multi-Seam Expansion Kit Seam Setter Pump Kit Seam Setter VCM *6" Cups

795.00 625.00 195.00 265.00

Stealth Seamer™ Automatic The Automatic Stealth Seamer™ is the ultimate heavy-duty seam setter for joining, leveling, and ﬂattening stone. The product's open design allows you to work on the seam while in use; removal is not needed to apply epoxy or scrape the seam. Seams are easily opened and closed via a smoothturning knurled roller. The 8" vacuum cups feature a continuous seal for a reliable hold on heavy stone. A powerful compact vacuum pump maintains pressure for all cups, and runs on AC power or AA batteries for any install situation. Improved pump technology provides a stronger hold to very textured or porous materials. Eight seam levelers slide on rails for custom placement and have vinylcapped, non-spinning feet to prevent scratches. Recommended for porous and non-porous materials. Multi-Seam Expansion Kit allows you to set two seams at the same time (up to 14 feet apart!), or chain-link four seam setters for very long seams

Stealth Seamer™ Manual Four seam levelers slide on rails for custom placement and have vinyl-capped, non-spinning feet to prevent scratches. The pump plungers have an indicator to alert user if re-pumping is needed, and can be re-pumped without removal or loss of suction. Use alone for short seams, or in pairs for longer seams. Recommended for non-porous materials. PART # OC-8129-STA-600 OC-8129-STA-EXP OC-8129-STM

DESCRIPTION

PRICE $

Stealth Seamer, Automatic *8" Cups Multi-Seam Expansion Kit *for the Auto Stealth Manual Stealth Seamer *8" Cups

995.00 895.00 375.00

OMNI CUBED PRODUCTS

Consistently create high-quality, perpendicular seams Ideal solution for waterfall edges, mitered aprons, butt-joints, compound corners, and inside corners Proprietary, non-marking vacuum cups won't stain surfaces FTSâ&#x201E;˘ vacuum cup technology for optimum hold on textured and leathered materials Align and dial-in the perfect angle for precise seams via knurled rollers and ďŹ ne-tune levelers Overcome the lower outswing of vertical pieces by applying the integrated counterpressure leveler Anchor Cup Attachments included to accommodate waterfall edges or other large pieces Powerful, compact pump maintains max pressure for entire system Use AC power or AA batteries for any situation Sold in pairs with convenient storage case

PART # OC-5145-90A-17

DESCRIPTION

PRICE $

Stealth Seamer 90 , Auto (Pair with case and pump)

1,495.00

OMNI CUBED PRODUCTS

Consistently create high-quality, expertly aligned perpendicular seams Ideal for mitered aprons, butt-joints, compound corners, and inside corners Proprietary, non-marking vacuum cups won't stain surfaces FTS™ vacuum cup technology for optimum hold on textured and leathered materials Align and dial-in the perfect angle for precise seams via knurled rollers and ﬁne-tune levelers Overcome the lower outswing of vertical pieces by applying the integrated counter-pressure leveler Monitor vacuum pressure at a glance with easy to read indicators Cups can be re-pumped without loss of remaining pressure, unlike ﬂip-leaver or screw-knob systems

PART # OC-5145-90M-17

DESCRIPTION Stealth Seamer 90 , Manual (Single)

PRICE $ 375.00

OMNI CUBED PRODUCTS

Consistently create high-quality, even seams 5â&#x20AC;? cups allow working with smaller pieces and tighter spaces Have more control with less effort than shims and screws Proprietary, non-marking vacuum cups won't stain surfaces FTSâ&#x201E;˘ vacuum cup technology for optimum hold on textured and leathered materials Easily access seams for epoxy application and removal; don't waste time scraping the seam after glue has set Open and close seams with ease via smooth-turning knurled roller Powerful, compact pump maintains max pressure for entire system Use AC power or AA batteries for any situation

PART # OC-5148-SNA-17

DESCRIPTION

PRICE $

Stealth Seamer Nano, Auto (Pair with case and pump)

795.00

OMNI CUBED PRODUCTS

Consistently create high-quality, even seams 5” cups allow working with smaller pieces and tighter spaces Have more control with less effort than shims and screws Proprietary, non-marking vacuum cups won't stain surfaces FTS™ vacuum cup technology for optimum hold on textured and leathered materials Easily access seams for epoxy application and removal; don't waste time scraping the seam after glue has set Open and close seam with ease via smooth-turning knurled roller Monitor vacuum pressure at a glance with easy to read indicators Cups can be re-pumped without loss of remaining pressure, unlike ﬂip-leaver or screw-knob systems

PART #

DESCRIPTION

OC-5148-SNM-17 Stealth Seamer Nano, Manual (Single)

PRICE $ 225.00

OMNI CUBED PRODUCTS No-Spin Backer Pad

Low-Proﬁle Bumper Accessory

Dry Polishing Systems Adapters

OC-DSA-090

OC-4139-LPB OC-5139-LPB

DESCRIPTION

PRICE $

4’’ Low Proﬁle Bumper 5’’ Low Proﬁle Bumper

25.00 25.00

OC-DSA-090 OC-DSA-091 0C-DSA-092

OC-DSA-092

OC-DSA-091

DESCRIPTION

PRICE $

Makita & Bosch Adapter-7’’ DeWalt DWP849 Adapter-7’’ Milwaukee Adapter-7’’

30.00 35.00 35.00

Miter-It Lamination Clamp The Miter-It™ clamp is an easy-to-use jig that allows finished-side-up miter laminations. Not flipping the material offers numerous benefits including increased safety for workers, reduced risk of damage to the material, and keeping the seam in view during lamination. The clamp offers coarse and fine adjustment settings for achieving exact and tight seams. The Miter-It securely holds drop-down edges at 90°, eliminating the need for a helper to position the material. The clamp's weight and non-marking, non-skid contact surface hold the product and miter piece in place - no suction cups needed. This simple, yet innovative jig greatly reduces the numerous awkward adjustments required with other miter clamps, and offers better results than taping methods alone. The heavy-duty steel clamp features a powder-coat finish and accommodates laminated edges from 1.5" - 6".

PART #

DESCRIPTION

PRICE $

OC-MTR-144 OC-MTR-144C

Miter-It Original Lamination Clamp *single* Miter-It Corner Lamination Clamp *single*

189.00 375.00 Miter-It Original

Miter-It Corner

CLAMPS AND SUCTIONS CUPS C-Clamps

Bar Clamps Ideal for all types of light-duty clamping. Thick and durable protective pads, and clamps rest parallel on the work surface for ease of work placement and adjustment.

Single Suction Cup

SIZE

PART #

DESCRIPTION

PRICE $

6’’ 12’’ 16’’ 18’’ 24’’ 36’’

SIS-WCLAMP206 SIS-WCLAMP212 SIS-WCLAMP216 SIS-WCLAMP218 SIS-WCLAMP224 SIS-WCLAMP236

Bar Clamp Bar Clamp Bar Clamp Bar Clamp Bar Clamp Bar Clamp

8.00 10.00 12.00 14.00 18.00 36.00

Double Suction Cup Dual mechanism produces exceptional cup strength ideal for the lifting of smooth ﬂat surface materials • Light weight aluminum body • 110 lbs capacity per cup • 4.8’’ diameter each cup

Triple Suction Cup

Quadruple Suction Cup Ideal for carrying heavy items such as glass, windows, doors, mirrors, etc. • Light weight aluminum body • 110 lbs capacity per cup • 4.8’’ diameter each cup

Vacuum Suction Lifter ABS handle

Vacuum Suction Lifter Metal handle • Built for heavy-duty installation with all-metal handle / pump assembly • 175 lbs capacity • Includes protective case

SIS-SC8-MH

Tile Suction Lifter • Designed to pick up tiles with ease. The suction is activated by simply pressing down on the center of the knob. It is the perfect solution for leveling tiles that have already been laid in place. • Total net weight of just 0.3 lbs. and can lift up to 55 lbs.safely. PART #

DESCRIPTION

PRICE $

ABA-TSL-4-BC ABA-TSL-4-B

Tile Suction Lifter - Black - with Case Tile Suction Lifter - Black

22.00 16.00

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 84

SINK MOUNTING SYSTEMS E-Z Dishwasher Bracket

Sink Setters

• Made in USA from 22 gauge galvanized steel • Eliminates dishwasher anchoring problems • Accommodates virtually any dishwasher • Easy installation under any type of countertop • Installed prior to or after countertop installation • Dishwasher does not have to be present at jobsite • Won’t damage expensive cabinetry • Eliminates return trip by countertop installer to anchor dishwasher. Saves time AND money!

The E-Z way to replace or repair an undermount sink.

PART # CON-EZDWB01 CON-EZDWB25 CON-EZDWB01-S CON-EZDWB25-S

• Simple installation, easy to adjust undermount sink installation kit. • Sink Setter allows you to replace your damaged undermount sink. • Repair a falling undermount sink with the Sink Setter

PRICE $

DESCRIPTION 1 EA 24" Dishwasher Bracket Box of 25 - 24" Dishwasher Bracket 1 EA 18" Dishwasher Bracket Box of 25 - 18" Dishwasher Bracket

4.25 95.00 4.25 95.00 PART #

E-Z Sink Bracket • Eliminates sagging sink problems • Accommodates virtually any under-counter sink type • Adjustable support rails • Multi-Bowl Strap works with all types of sinks • Easy installation under any type of counter top • Won’t damage expensive cabinetry • Extremely Strong PART # CON-EZSB01

PRICE $

DESCRIPTION Sink Setter set of 2 straight rails 25"-47" side to side w/ hanger plate

L-26 1/2" H-6 1/2" W-7 1/2"

27.95

PRE-PW-114-P

Offset Sink Setter ﬁts up to 47" set of 2 w/ hanger plates

L-26 1/2" H-6 1/2" W-8"

31.95

PRE-PW-99

Sink Setter Set of 2 straight rails 20"-26" side to side

L-16" H-10" W-8"

19.95

Sink Setter Set of 2 straight rails 20"-26" side to side w/ hanger plate

L-16" H-12" W-7 1/4"

19.95

PRE-PW-99-P

8.95

Sinkits mechanical anchors are designed to be used in 2cm & 3cm stone countertops, via holes drilled on the underside of surface. • Very strong-supports up to 117 pounds each • Fast and easy to use • Time saving DESCRIPTION

PRICE $

SIN-SINKKIT48

Undermount Anchors, 48 Pcs

69.95

PW-104-P

PW-114-P

48 lbs

52 lbs

PW-99

PW-99-P

38 lbs

48 lbs

E Brackets

LC Brackets

Great for mounting stainless and composite sink under thin material, porcelains, quartz or anytime sink clearance is at a minimum! Requires no drilling, slotting or adhesives. They hang over cabinet divider for strength. Only one screw is needed to hold them in place.

The LC Bracket is used when there is no room for conventional clips or clamps. Also works well for repairs when a sink has fallen and needs to be reﬁtted.

PART #

DESCRIPTION

SIN-E1215 E-brackets Sink Mount 4 Pack SIN-BS1125 E-Bracket Stabilizer

PRICE $ 4.60 0.95

PRICE $

PRE-PW-104-P

Sinkits

PART #

SIZE

PART # SIN-LCBRACKET

DESCRIPTION

PRICE $

Lc Bracket (Low Clearance) Pack Of 2

3.95

SINK MOUNTING SYSTEMS AND ANCHORS Screws 10/24 Thread Screws

Sink Anchors

• Box of 100 each

Closed-end 10/24 thread

SIZE

PART #

DESCRIPTION

PRICE $

1/2” 3/4”

SIS-SCREW1/2 SIS-SCREW3/4

Screws 10-24 Pan Phl M/S Screws 10-24 Pan Phl M/S

4.00 4.00

PART # SIS-ANCHOR1024

T-Anchors with Nuts

GoClips

PRICE $

DESCRIPTION Closed Bottom Anchors 10-24

12.00

Sink Clips

• Stainless steel construction

SIZE

PART #

3-16” X 1/2” SIS-TANCHOR10 3-16” x 1/2” SIS-TANCHOR50

DESCRIPTION

PRICE $

10 ea T-Anchor with Nuts 50 ea T-Anchor with Nuts

7.95 7.95

STD

Innovative new design in steel sink mounting clips. All you need is a grinder and a diamond blade for professional, consistent results.

Bonded Anchoring System

Self-locking with spring clip • Use on sink rims up to 3/4" • Time saving

• No-drill steel anchors adhere to underside of countertops for secure sink installations. • Bag of 6 each. SIZE

PART #

DESCRIPTION

3-16” X 1/2” SIS-STUD Sink Stud w/ Wing But Set

SIZE

PART #

DESCRIPTION

PRICE $

1/8” 7/8” 1-1/4”

GOC-ZKGO-SS50 GOC-ZKGO-STD25 GOC-ZKGO-XL20

11GA - BAG OF 50 11GA - BAG OF 25 11GA - BAG OF 20

45.00 31.50 25.50

PRICE $

GoClips HD

4.95

Sink Clips

PART #

DESCRIPTION

PRICE $

SIS-BRACKET

Sink Bracket - Bag of 6 each

3.50

Heavy Duty 10GA S/Steel Dual Use. You can use a standard grinder & blade to make 1/2” deep slots or use a 10mm non-coring blind bit at 1/2” depth SIZE

PART #

DESCRIPTION

PRICE $

Cinclips Undermount Sink Set

1/8” 7/8” 1-1/4”

GOC-ZKGO-SS-HD50 GOC-ZKGO-STD-HD25 GOC-ZKGO-XL-HD20

BAG OF 50 BAG OF 25 BAG OF 20

47.00 31.00 25.00

Cinclips undermount sink mounting brackets are the best way to secure an undermount sink. Simply screw into the cabinet and wedge up under the sink.

U-MOUNTS • Push pins and screws provided in every package. • Designed to snap to desired length so cutting is not required. • Full length is 12”. Notched and numbered at 6” 8” and 10”. • No Tape measure required.

• Saves time & money • No special glue or epoxy needed • Kit includes 5 braces and all necessary hardware for installation • Eliminates reaching up to the stone to install anchors • Easily mounted to the inside of the cabinet PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

CIN-CC-1027

Cinclips Set

19.95

12”

GOC-UMOUNTS25

BAG OF 25

47.50

INSTALLATION & SHOP SUPPLIES

Sink Mounting Hardware

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 86

CORBELS, RODDING MATERIAL, SUPPORT BRACKETS Wood Corbels

Fiberglass Rods

duBois corbels are CNC machined for exact pattern duplication, and hand carved for ﬁnishing details. Every wood corbel is then sanded, shrink-wrapped, and packed with a silica bag for moisture protection. Limited Lifetime Warranty.

Used for reinforcing granite and other stone countertop applications. Fiberglass rods are superior to steel rods because they are 100% free of grease and will not rust. They can be easily cut to any length while minimizing wasted material. Our ﬁberglass rods have special grooving which allows adhesive to ﬂow around rods, providing stronger stone reinforcement.

A wide selection of corbels, posts, legs & feet, only, capitals, and hard carved moulding, including 50 copyright protected designs unique to duBois is available for special order. PART # HAR-CORC-1-RW HAR-CORG-RW HAR-CORG-WB HAR-CORS-RW HAR-CORM-RW HAR-CORM-3-RW HAR-MCOR1-DBAC

SIS-FIBERROD $90.00

PRICE $

DESCRIPTION 4-1/2" x 5" x 10" - Rubberwood 3" x 6-1/2" x 12" - Rubberwood 3" x 6-1/2" x 12" - White Birch 3" x 6-1/2" x 12" - Rubberwood 2" x 7-1/2" x 10-1/2" - Rubberwood 3" x 7-5/8" x 10-1/2" - Rubberwood 1-1/2" x 10" x 13-1/2" - Antique Copper

27.50 12.50 12.25 30.75 6.95 8.95 41.50

FiberGlass rodding with grooves on both sides. Size: 1/8" x 3/8" x 328

SIS-FIBERROD01 $135.00 Carbon Fiber Rodding with grooves on both sides and carbon ﬁber on the edges. Size: 1/8" x 3/8" x 328

HAR-CORC-1-RW

HAR-CORG-RW

HAR-CORG-WB HAR-CORS-RW

SIS-FIBERROD02 $155.00 Steel Carbon Fiber Rodding with grooves on both sides, carbon ﬁber on the edges, and steel bar inside. Size: 1/8" x 3/8" x 328

HAR-CORM-RW

HAR-CORM-3-RW

HAR-MCOR1-DBAC

Carbon Fiber Advantage Stronger than white rodding and steel Patented Carbon Reinforcement The long sides run ﬂat to ﬁt into a tight cut The special shaping at each end offers increased contact area for ‘‘bite’’ and stronger adhesion with the glue

Overhang Support Brackets

These custom kitchen countertop brackets are for supporting stone overhangs and should be placed at about 18" to 24" centers (varies depending on the type and strength of the stone). Custom sizes and thicknesses available PART #

DESCRIPTION

LOG-B10 1/4" x 2-1/2" x 10" - Knee Wall Top End Bracket LOG-B12 1/4" x 2-1/2" x 12" - Knee Wall Top End Bracket LOG-B15 1/4" x 2-1/2" x 15" - Knee Wall Top End Bracket LOG-B10T 1/4" x 2-1/2" x 10" - Back Mount L-Shape Bracket LOG-B12T 1/4" x 2-1/2" x 12" - Back Mount L-Shape Bracket LOG-B15T 1/4" x 2-1/2" x 14" - Back Mount L-Shape Bracket

PRICE $ 11.95 12.95 14.95 15.95 17.95 19.95

Stone Steel Rods Specially constructed 12 ft long durable steel rods are used for reinforcing granite and other stones.

SIZE

PART #

DESCRIPTION

PRICE $

1/8” X 1/4” X 12’ 1/8” X 1/2” X 12’

HARD-FLABA24502 HARD-FLABA24504

Steel Rod Steel Rod

3.95 6.95

WEDGES, SHIMS, FIBERGLASS ROLLER FRAME FiberGlass Roller Frame

Tapered Plastic Wedges (1-1/2" x 3-3/8") tapers from 1/32" to 1/4" PART #

QTY.

PRICE $

SIS-WEDGEE-02

100 ct

14.75

Support rods in 328 ft. roll PART #

PRICE $

ABA-FBG31

245.00

Weg-Fab Fabricator’s Wedges • Strong & durable polystyrene material • Deeply embossed score line at top allows separation if required PART #

QTY.

PRICE $

SIS-WEDGEE-03

100

6.75

Tapered Breakaway Plastic Wedge (1-1/2" x 6") tapers from 1/32" to 3/8", scored in 1" segments PART #

QTY.

PRICE $

SIS-WEDGEE-04

100

55.00

Horseshoe Leveling Shims

Simple design makes counter top installations and repairs faster and more cost effective. • Use for situations that are difﬁcult to shim and apply adhesive • Use where access is limited; accurately level and inject adhesive • Can be used in sub-tops or corner blocks • Can be installed before or after the stone is in place • Use to pre-level seams • Perfect for Lazy Susans

Twist Shim Driver

Twist Shim (9" tall)

PART #

THICKNESS COLOR QTY. PRICE $

SIS-HORSESHOE116 1/16" SIS-HORSESHOE18 1/8" SIS-HORSESHOE14 1/4"

Blue Red Black

100 100 100

2.25 3.50 6.75

Nelson Wood Shims Made with a premium pine species, which contains less sap to make cutting and snapping easier. 120 shims in a box.

SIZE

PART #

DESCRIPTION

PRICE $

8”

SHIMS-BP120

Pine Wood Shims

11.95

Nelson Composite Shims Drive: Twist shim through 5/8" pilot holes, drilled at user speciﬁed locations.

PART # NSI-TW50 NSI-TW200 NSI-TWDRIVE

Level: Place countertop on cabinet & adjust level form under-side with ratcher & shim driver.

Glue: Apply adhesive through center hole of Twist Shim to permanently lock counter in place.

DESCRIPTION

PRICE $

Twist Shim Driver Twist Shims, Container of 50 Twist Shims, Container of 200

17.50 49.00 179.00

• Mold and mildew resistant • Will never decay • Lifetime durability and snug ﬁt • Sold in boxes of 32 bundles (12 shims per bundle) SIZE

PART #

DESCRIPTION

PRICE $

8”

SHIMS-WC32

Composite Shims

6.95

INSTALLATION & SHOP SUPPLIES

Twist Shims

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 88

BURN-IN STICKS, TEMPLATE MATERIAL, ETC Template Material

H.BEHLEN Burn-In Sticks H.BEHLEN Burn-In Sticks are manufactured from the ﬁnest colorants and resins. Distinctly superior in every respect. Will not lift out and accepts any type of ﬁnish. May be leveled using traditional hot knife methods or by using Wool Lube™, sandpaper, and a rubbing block. Burn-In Sticks may be used on virtually any type of surface including marble. When used on marble, the surface should be preheated to assist adhesion

Wood 36 strips per bundle

Polypropylene 22 strips per bundle

SIZE

PART #

2.5’’ x 8” 2.5’’ x 8” PART #

DESCRIPTION

Clear

4.50

BEH-B320-008

Black

4.50

BEH-B320-007

White

4.50

BEH-B320-001

Dark Mahogany

4.50

BEH-B320-004

Extra Dark Walnut

4.50

PART #

DESCRIPTION

PRICE $

BEH-B320-018

Dark Cherry

4.50

SIS-PLYWOOD58 SIS-PLYWOOD34

4ft x 8ft x 5/8" 4ft x 8ft x 3/4"

35.00 39.00

BEH-B320-873

Red Mahogany

4.50

BEH-B320-818

Burnt Umber

4.50

BEH-B320-010

Dark Amber

4.50

BEH-B320-011

Amber

4.50

BEH-B320-302

BEH-B320-303

Assortment 7” Burn In Stick 6pcs (Amber, Dark Amber, Black, Clear, Burnt Umber, White)

Plywood Sheets • Cabinet grade Poplar plywood with smooth ﬁnish on both sides • Very strong, ﬂat and ideal for countertop decking

Steel Measuring Tape

24.50

Assortment 7” Burn In Stick 6pcs 24.50 (Fruitwood, Maple, Light Brown Walnut, Extra Dark Walnut, Medium Brown Walnut, Dark American Walnut) Assortment 7” Burn In Stick 6pcs (Cherry, Dark Cherry, Dark Mahogany, Medium Mahogany, Red Mahogany, Golden Oak)

39.95 27.50

PRICE $

BEH-B320-012

BEH-B320-301

PRICE $

SIS-WTEMPLATE36 Wood Template Polypropylene Template HARD-32184

24.50

SIZE

PART #

DESCRIPTION

PRICE $

16’ x 1”

SIS-MT

Measuring Tape

5.00

Komelon

Stainless Steel Measuring Tape • All metallic components are stainless steel • Double-sided printing • Impact resistant rubberized case SIZE

PART #

DESCRIPTION

Hot Melt Glue Sticks

16’ x 1” 25’ x 1”

SIS-MTSS SIS-MTSS-25

Stainless Steel Measuring Tape Stainless Steel Measuring Tape

Appearance: Transparent Softening Point: +/- 212°F Open Time - 20-30 seconds Setting Time - 10-20 seconds 12 per bag

Dishwasher Mount Closed Bottom Anchors 10-24

SIZE

PART #

DESCRIPTION

PRICE $

PART #

PRICE $

11-1/4” x 1/2”

SIS-GLUESTICKS

Hot Melt Glue Sticks

5.50

SIS-DISHMOUNT

3.50

PRICE $ 18.00 20.00

MARKERS, SQUEEGEES, MIXING CUPS, ETC Staedtler Dry Marker - Box of 12

SKM Super Met-al Squeeze Action Paint Markers

• Wood-cased water-soluble hexagonal pencil • For opaque marking on almost all surfaces even on dark or transparent ones, e.g. paper, plastic, metal, glass, wood, leather and stone • Can be wiped off many smooth surfaces • Non-corrosive colour pigments

• Ideal for all surfaces including metal, glass, wood, rubber and plastic • Works great on wet, slippery surfaces. • Paint can be removed with xylene without harming the surface. • Water-resistant, weather-resistant • Permanent marks on most surfaces • Quick-drying formula, ﬁne lines • Heavy-duty, metal tip: 1.4mm stroke width PART #

DESCRIPTION

PRICE $

SKM-1295 SKM-1324 SKM-1326

White Yellow Red

3.50 3.50 3.50

PART #

DESCRIPTION

PRICE $

27050 27051 27052 27053 27054 27057

Non-Permanaent White Non-Permanaent Yellow Non-Permanaent Red Non-Permanaent Black Permanent White Permanent Black

24.50 24.50 24.50 24.50 24.50 24.50

Spray Bottle

China Markers Waterproof and perfect for marking on most smooth surfaces.

• Patented “anti back-off” system locks the bottle to the trigger to prevent accidental unloosening • FDA complaint • Use exclusively with the 5600 / 5700 Series Contour Trigger Sprayer

PART #

DESCRIPTION

PRICE $

DIX-00073 DIX-00079 DIX-00092

Yellow - Box of 12 Red - Box of 12 White - Box of 12

8.00 8.00 8.00

Hand Held Squeegees

PART #

DESCRIPTION

IMP-5032AB IMP-5681

32oz Plastic Spray Bottle 9-7/8" Gray Sprayer Trigger Contour Chem Resistant

Quick and easy removal of liquids

PART #

DESCRIPTION

PRICE $

REPL. BLADES

PRICE $

PICTURE

10" 10" 12" 12" 14" 14" 16" 18" 18" 22"

HAV-FA-10 MOE-17773-10 HAV-F-12 MOE-17773-12 HAV-FA-14 MOE-17773-14 HAV-FA-16 IMP-7018 MOE-17773-18 IMP-7022

Aluminum Frame Stainless Steel Zinc Plated Steel Frame Stainless Steel Aluminum Frame Stainless Steel Aluminum Frame Galvanized, rust-resistant frame Stainless Steel Galvanized, rust-resistant frame

9.95 13.95 10.95 14.95 11.50 15.95 12.25 12.95 16.95 13.75

HAV-LA-10 MOE-17782 HAV-L-12 MOE-17783 HAV-LA-14 MOE-17784 HAV-LA-16 N/A MOE-17785 N/A

2.95 1.95 3.00 2.25 3.75 2.75 3.95 2.95 -

1 2 1 2 1 2 1 3 2 3

Tongue Depressors

3.95 2.25

SIZE

1 Square End & 1 Round End

PRICE $

Mixing Cups • One time use, biodegradable • 100 per sleeve

PART #

QTY

PRICE $

SIZE

PART #

DESCRIPTION

SIS-TD100 SIS-TD500

100/BOX 500/BOX

2.95 12.50

5oz 9oz

LAG-C-5 OZ LAG-SCCR9NJ

Waxed Cup 100/Bag Waxed Cup 100/Bag

PRICE $ 7.25 8.50

INSTALLATION & SHOP SUPPLIES

• Easy peel off wrapper • Needs no sharpening

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 90

KNIVES, RAZOR BLADES, SCRAPERS, WALL STRIPPER Metal Retractable Utility Knife w/ 3 Blades

Putty Knives An indispensable tool for scraping seams, ﬂat wiping, sorting, and other modiﬁcations. SIZE

PART #

PRICE $

1” 2” 3”

SIS-PK1 SIS-PK2 SIS-PK3

2.00 2.50 3.00

• Overlap nose for safety • Fully retractable PART # ACC-66-0330

PRICE $ 4.50

Folding Utility Knife w/ 5 Blades

Auto Change Retractable Utility Knife w/ 3 Blades

• Folds to pocket size • Quick easy blade change • Comes with 5 blades • Extra blades in a blade guard dispenser.

• Die cast zinc handle and retractable blade • Variable blade exposure • Blade storage in handle • Auto Load Design for easy blade changes

PART #

DESCRIPTION

PART #

PRICE $

DESCRIPTION

PRICE $

ACC-65-0203 Utility Knife 8.95 ACC-66-0240 2 Notch Util. Blades, .025" Carbon 11.95 100 Pack Safety Dispenser

ACC-65-0214 10.50 Utility Knife ACC-66-0240 2 Notch Util. Blades, .025" Carbon 11.95 100 Pack Safety Dispenser

4’’ Wide Blade Scraper w/ 5 blades

4’’ Adjustable Wall Stripper w/ 5 blades

• Made of industrial-ground carbon steel • For practically any scraping job • Great for wax build-up or dried adhesives

PART #

DESCRIPTION

• Made of surgical carbon steel • Heavy-duty blades with precision-ground edges • Ideal for removing wallpaper, paint and stickers PRICE $

ACC-65-0002 Scraper 4.50 ACC-66-0454 Replacement Blades - Box of 5 2.50

Mini Scraper w/ 1 single edge blade

PART #

DESCRIPTION

PRICE $

ACC-65-0001 ACC-66-0377

Wall Stripper Replacement Blades - Box of 5

11.50 1.90

Plastic Single Edge Razor Blades • Perfect for use on delicate surfaces • Used for less chance of surface scratching • Lightweight

PART #

PRICE $

PART #

DESCRIPTION

PRICE $

ACC-66-0123

0.95

SIS-RAZOR-P SIS-RAZOR-H

Plastic Razor Blades - 100 per box Scraper for Plastic Razor Blade

6.95 5.95

Single Edge Razor Blades

Premium Single Edge Razor Blades

Sharp-cutting blade ﬁts most standard scrapers. Long-wearing blade provides consistent high quality and longer service life.

• Long lasting world famous duro edge • Fits all window scrapers and box cutters • Each blade protected in shelling paper • High-grade long lasting high carbon steel edge

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

SIS-RAZOR

Razor Blades- 100 per box

4.00

ACC-66-0403

Premium Razor Blades - 100 per box

5.95

SAFETY GLOVES, CAULK GUN CUT 5 IMPACT Glove

TACKER Glove

• Offers FiberWire cut level 5 protection covering the entire hand. • Fullback of hand protection reduces hand injuries • Etched latex palm provides superior grip on wet and oily surfaces

PART #

COLOR

SIZE

PRICE $

LIF-GTA-9YL LIF-GTA-9Y1L LIF-GTA-9Y2L

Gray/Orange Gray/Orange Gray/Orange

Large X-Large 2X-Large

31.95 31.95 31.95

LIF-GTA-9KL LIF-GTA-9K1L LIF-GTA-9K2L

Black Black Black

Large X-Large 2X-Large

31.95 31.95 31.95

LIF-GTA-15CFL LIF-GTA-15CF1L LIF-GTA-15CF2L

Camo Camo Camo

Large X-Large 2X-Large

31.95 31.95 31.95

9” Standard Caulk Gun • Smooth-moving rod-and-plunger mechanism allows you to lay a neat and even bead • Quick-release lever simpliﬁes cartridge changes • Frame accommodates standard glaze, sealant and caulk tubes • Designed for light to moderate tasks

PART #

SIZE

PRICE $

LIF-GFT-13KM LIF-GFT-13KL LIF-GFT-13K1L

Medium Large X-Large

17.95 17.95 17.95

PART #

SIZE

PRICE $

LIF-GPM-14KM LIF-GPM-14KL LIF-GPM-14K1L

Medium Large X-Large

4.95 4.95 4.95

PALMER Micro Foam Glove • Lightweight, low proﬁle glove with a breathable polyester shell. • Thin foamed nitrile palm offers super grip and tactility.

8 Seconds TOP GRAIN Glove Durable yet comfortable top grain cowhide leather glove that offers superior abrasion resistance. • Keystone thumb design for increased dexterity and tactility

PART #

DESCRIPTION

PRICE $

HARD-CAUGUN

Pistol–Grip, 12Oz

6.50

9” Ratchet Caulk Gun

PART #

SIZE

PRICE $

LIF-G8S-6SM LIF-G8S-6SL LIF-G8S-6S1L

Medium Large X-Large

9.95 9.95 9.95

Latex Gloves Powder Free

• Zinc-chromate plated • Built in spout cutter • No-pinch ﬁnger guard

PART #

PRICE $

HARD-CAUGUN2

18.75

SIZE

PART #

DESCRIPTION

PRICE $

Large Medium

89422 89423

Disposable Latex Gloves Disposable Latex Gloves

7.95 7.95

INSTALLATION & SHOP SUPPLIES

Heavy duty, genuine leather gloves designed for superior abrasion resistance. • Machine washable • Padded palm for impact & vibration absorption

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 92

MASKS, RESPIRATORS Particulate Respirator 8200/07023

2200N95 Disposable Respirator

• NIOSH approved for at least 95 percent ﬁltration efﬁciency against certain non-oil based particles • Lightweight, disposable particulate respirator is an economical choice for respiratory protection • Adjustable nose clip and cushioning nose foam reduces potential for eyewear fogging

• Softspun lining gives added comfort and durability • Dura-Mesh shell protects ﬁlter

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

3M-07023

20 per box

13.50

SAF-2200N95

20 per box

26.00

Particulate Respirator 8210

1200N95 Dirt Dawg Dust Mask

• Welded strap attachment • Cushioning nose foam • Adjustable nose clip helps provide a custom ﬁt and secure seal

• Specially designed for stone dust • N95 Rating

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

3M-8210

20 per box

20.50

SAF-1200N95

20 per box

29.00

Particulate Respirator 8511

2300N95 Disposable Respirator

• 3M (TM) Cool Flow (TM) Exhalation Valve • Example applications include emergency or pandemic preparedness planning, stockpiling, etc • Of certain airborne biological particles like mold, Bacilus anthraces, Mycrobacterium tuberculosis • N95 Approved

• Exhale valve reduces hot air build-up, keeping workers cooler and more comfortable • 100% PVC Free • Ventex exhale valve • N95

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

3M-8511

10 per box

24.50

SAF-2300N95

10 per box

28.50

TruAir N95 Particulate Respirator with Vent

2700N Dusty Mask

• Large, molded shell helps to reduce breathing resistance, minimizing end-user fatigue. • Adjustable metal nosepiece provides a safe, secure ﬁt. • Non-latex, elastic head straps. • NIOSH approved N95 and N99 level protection.

• Hand Strap with buckle for quick release of mask • Ventex valve lets hot air out faster so workers breath easier and stay cooler • N95

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

GAT-80302V

10 per box

11.95

SAF-2700N95

10 per box

35.75

PEAKFIT N95 Particulate Respirator • Large, contoured design makes breathing easy, reducing worker fatigue. • Molded nose bridge, with no metal nosepiece, no pinching required. • Adjustable, one-piece cloth head strap is more durable and comfortable than conventional, stapled versions. • NIOSH approved N95 level protection.

PART # GAT-80101 GAT-80102V

DESCRIPTION

PRICE $

Unvented - 20 per box With Vent - 10 per box

14.95 13.95

RESPIRATORS, GLASSES Respirator 8000 Series

Respirator 8000 Series KIT 1

NIOSH approved. Respiratory protection against mists of lacquers, enamels, and other paints.

Applications: Welding, Grinding, Lime, Metal Machining, Aluminum Processing, Bagging, Brazing, Bufﬁng, Cement Work, Dusty Environments, Foundries, Metal Working, Mining, Polishing, Poultry, Sanding, Soldering, Stone Quarrying, Sweeping, Textiles, Torch Cutting, Waste Processing/Recycling.

1/2 Mask 8000 Series w/Filter SIZE

PART #

PRICE $

MEDIUM LARGE

SAF-8002 SAF-8003

20.95 20.95

Includes: • 1/2 Mask 8000 Series w/Filter • 1 Pair Replacement Disk Filter Holder • 1 Bag of 8910 N95 Preﬁlters (5 Pairs)

1 Pair Replacement Disk Filter Holder PART #

PRICE $

SIZE

PART #

PRICE $

SAF-8900

5.50

MEDIUM LARGE

SAF-8000N95-M SAF-8000N95-L

42.75 42.75

1 Pair of P100 Particulate Filter PART #

PRICE $

SAF-8940

10.95

Respirator 8000 Series KIT 2 Applications: Paint spray and pesticide applications which are oil-free.

5 Pairs of N95 Particulate Filter PART #

PRICE $

SAF-8910

21.00

SIZE

PART #

PRICE $

MEDIUM LARGE

SAF-8112N SAF-8113N

32.50 32.50

1 Pair of Organic Vapor Cartridge PRICE $

SAF-8100

15.00 Includes: • 1/2 Mask 8000 Series w/Filter • 1 Pair of 8100 Organic Vapors Cartridges • 1 Bag of 8910 N95 Preﬁlters (5 Pairs) • 1 Pair of 8020 Retainers.

1 Pair of Preﬁlter Retainer PART #

PRICE $

SAF-8020

4.50

QUEST Safety Glasses

STROBE Safety Glasses

Black/Clear

Silver/Clear

Camo/Smoke

Camo/Amber

Silver/Amber

Camo/Smoke

Sport styled, partial frame protective eye-wear offering lightweight, low proﬁle option. Small to medium ﬁt and coverage. Frame constructed with soft rubber temple and nose bridge.

Lightweight, low proﬁle safety glass with a nylon frame and polycarbonate lenses. Small to medium ﬁt and coverage. Frame constructed with soft rubber temple and nose bridge.

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

LIF-EQT-12KC LIF-EQT-12KA LIF-EQT-12KST LIF-EQT-12CFC LIF-EQT-12CFA LIF-EQT-12CFST

Black/Clear Black/Amber Black/Smoke Camo/Clear Camo/Amber Camo/Smoke

7.25 7.25 7.25 7.95 7.95 7.95

LIF-ESR-6C LIF-ESR-6ST LIF-ESR-12SA LIF-ESR-12CFC LIF-ESR-12CEST LIF-ESR-12CFA

Silver/Clear Silver/Smoke Silver/Amber Camo/Clear Camo/Smoke Camo/Amber

7.95 7.95 7.95 8.95 8.95 8.95

INSTALLATION & SHOP SUPPLIES

PART #

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 94

GLASSES, EARMUFFS, SHOE COVER SECTORLITE Safety Glasses

Earmuff Z2

Standard Earmuffs • NRR25 Rating

Mirror

Yellow

Clear

PART #

PRICE $

SAF-6201

13.50

Smoke

Extremely lightweight polycarbonate frameless protective eye-wear. Soft rubber temple tail inserts and nose bridge.

Earmuff M1

Premium Earmuffs • NRR29 Rating

PART #

DESCRIPTION

PRICE $

LIF-ESE-6C LIF-ESE-6ST LIF-ESE-6LT LIF-ESE-9M

Clear Smoke Yellow Mirror

6.95 6.95 6.95 6.95

PART #

PRICE $

SAF-6100

32.25

Economy Safety Glasses

Softies Ear Plus With Cord

• Modern aesthetic frame design • Wrap around safety lens for front and side angle protection

High NRR 30 Rating - suitable for most noisy environments

PART # SIS-GLASSES

DESCRIPTION Safety Glasses

PRICE $

PART #

DESCRIPTION

PRICE $

2.99

SAF-6650

100 pairs w/cord

30.25

Shoe Cover

Pura-Fit Ear Plus Un-Corded

• Latex free • Fluid repellant • Breathable 40g spunbond material • Anti-skid bottom • One size ﬁts most

• 200 pairs per box • Soft, disposable foam earplugs • 100% PVC-Free • Highest independently tested NRR 33 • Tapered for easy insertion • Longer length easy ﬁt & comfort PART #

DESCRIPTION

PRICE $

SAF-6800

Moldex Pura-Fit

34.50

TaperFit Regular Uncorded Earplugs This soft polyurethane foam earplugs features a smooth foam that expands in the ear canal to help provide comfortable hearing protection. PART #

QTY.

COLOR

PRICE $

LIF-ASC-14K LIF-ASC-14K10

100 10

Black Black

18.95 2.50

PART # 3M-312-1219

DESCRIPTION

PRICE $

Box with 200 Pairs

38.95

APRONS, BOOTS, WATERPROOF JACKETS Over-the-Shoe Pull On Boots

Stone Aprons

SIS-APRON01 • Slip-resistant outsole for traction on wet surfaces • Top strap and buckle adjustment for secure ﬁt

• Made of high quality nylon, these aprons feature Velcro strips which are designed for holding your polishing pads. • Strong clip with an adjustable strap made to ﬁt all sizes.

SIS-APRON02

SIZE

PART #

PRICE $

SIZE

PART #

PRICE $

9 10 11 12 13

SAF-OS-BYS17/09 SAF-OS-BYS17/10 SAF-OS-BYS17/11 SAF-OS-BYS17/12 SAF-OS-BYS17/13

23.95 23.95 23.95 23.95 23.95

14 15 16 17 18

SAF-OS-BYS17/14 SAF-OS-BYS17/15 SAF-OS-BYS17/16 SAF-OS-BYS17/17 SAF-OS-BYS17/18

23.95 23.95 23.95 23.95 23.95

• .35mm PVC lightweight waterproof safety yellow fabric • Fully sealed seams to prevent water penetration • Polyester-reinforced fabric for puncture and tear resistance SIZE

PART #

DESCRIPTION

PRICE $

L L

SIS-APRON01 SIS-APRON02

Stone Apron Economic Yellow Apron

24.00 7.50

Waterproof Apron This Alpha® apron has the strap hanging the apron on the shoulders, instead of the neck, ensuring less fatigue while providing more coverage over the chest. Also the apron is now a D900 Oxford / PU coated material which is much lighter weight and has a very good waterprooﬁng capability.

• Abrasion-resistant nylon net lining for easy on/off • V-bar molded shank for complete outsole support

SIZE

PART #

PRICE $

SIZE

PART #

PRICE $

7 8 9 10

SAF-ST-PB22/07 SAF-ST-PB22/08 SAF-ST-PB22/09 SAF-ST-PB22/10

23.95 23.95 23.95 23.95

11 12 13 14

SAF-ST-PB22/11 SAF-ST-PB22/12 SAF-ST-PB22/13 SAF-ST-PB22/14

23.95 23.95 23.95 31.95

SIZE

PART #

DESCRIPTION

PRICE $

Large

A-APRON0900

Waterproof Apron

19.95

Cyclone

Waterproof Apron • Vinyl material with two Velcro strips down the front for holding polishing pads while you work PART #

SIZE

PRICE $

C-APRON

One size only

29.00

Waterproof Jacket • High quality PVC on polyester • Storm ﬂap front • Cape back with vents • 2 Front snap pockets • Underarm vents to keep you cool • Attached hood SIZE L XL 2XL

PART #

StoneMason Sleeves The Abaco Stonemason Sleeves ﬁt snugly around the wrist and upper sleeve area to prevent clothes from getting soaked during wet grinding.

PRICE $

SAF-RC35Y-L 10.95 SAF-RC35Y-XL 10.95 SAF-RC35Y-2XL 10.95

PART #

Length

Width

PRICE $

ABA-SMS019

19-1/4"

6-1/2"

29.00

INSTALLATION & SHOP SUPPLIES

Steel Toe Boots

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 96

KNEE GUARD, STRETCH BELT, RAGS, ETC FACTOR Knee Guard

APEX GEL Knee Guard

Hardshell kneepad featuring PU foam padding for protection and comfort. The ballistic nylon construction resists abrasion for increased durability. One size ﬁts all.

Innovative internal gel insert molds and forms to the patella and knee cap. Provides non marring, maximizing stabilization and protection, Hinged upper support strap is removable and prevents binding while the TPR cap maximizes tracking and stability on all surfaces. One size ﬁts all.

• Fully adjustable two straps system reduces binding and slipping • Quick-release buckle fasteners allow for easy application and removal

• Fully adjustable two straps design resist slipping • Designed to prevent “roll-off” on hard surfaces • Fully adjustable two straps system reduces binding and slipping

PART #

PRICE $

PART #

PRICE $

LIF-KFR-OK

19.95

LIF-KAX-0K

49.95

Fiberware Cut 5 Sleeve Fiberware cut 5 sleeve covers your entire arm with cut level 5 protection. The thumb loops keep the sleeve in place, while the unique contour palm cut eliminates material bunching while wearing a glove. • Adjustable bicep closure ensures a good ﬁt on most users • One size ﬁts all PART #

PRICE $

LIF-SFV-15Y

15.95

Stretch Belt

• Ergonomically designed for maximum ﬂexibility and support • Removable and fully adjustable 1.5” elastic suspenders with hook/loop release tabs • Two stage adjustable hook/loop closure system • Vented and removable lumbar pad offers superior comfort • Durable, lightweight and breathable construction • Offers superior back and abdominal support for heavy lifting PART #

SIZE

PRICE $

SIZE CHART

LIF-BSH-6KS LIF-BSH-6KM LIF-BSH-6KL LIF-BSH-6K1L LIF-BSH-6K2L LIF-BSH-6K3L

Small Medium Large X-Large XX-Large XXX-Large

22.95 22.95 22.95 22.95 22.95 22.95

Small Medium Large X-Large XX-Large XXX-Large

White Polo Rags

SIZE

• Great for those messy jobs • A must have for installers

5 lbs 10 lbs 25 lbs 25 lbs

30’’ - 34’’ 34’’ - 40’’ 38’’ - 42’’ 40’’ - 44’’ 42’’ - 46’’ 44’’ - 48’’

PART #

DESCRIPTION

PRICE $

RAG-POLO-05 RAG-POLO-10 RAG-POLO-25 RAG-POLO-25F

White Knit T-Shirt Rags White Knit T-Shirt Rags White Knit T-Shirt Rags White Fleece T-Shirt Rags

9.50 21.95 43.95 35.95

TAPES, COUNTERTOP COVER, FIBERGLASS MESH Alpha G-TAPE

Builders Paper

• Multi-Purpose Masking, Hard Surface Protection and Repair Tape • Waterproof, weather/UV resistant Paper “drop cloth” for protecting work surfaces from scratches, paint or debris during fabrication/installation SIZE

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

2" x 163'

A-GT1009

Multi-Purpose Tape

15.99

TRI-35140/25

35" x 140" x Roll

10.95

Paper Masking Tape

Pre-Taped Plastic Drop Cloth

• Crepe paper backing provides easy tearing and conformability on irregular surfaces and around corners

Built-in static cling helps the plastic drape cling to the surface protected - even in windy conditions or with spray applicators.

• Hand tearable and sliver resistance with one piece removal for easy use

SIZE

PART #

DESCRIPTION

PRICE $

0.94” x 180’ 1.41” x 180’ 2” x 180’

3M-68708 3M-68709 3M-68710

Paper Masking Tape Paper Masking Tape Paper Masking Tape

2.25 3.35 3.95

Countertop Cover

PART #

DESCRIPTION

PRICE $

TRI-396590 TRI-949560

2' W x 90' L Roll 3.94' W x 72' L Roll

6.95 9.25

Stonecrete

Adhesive Backed Fiberglass Mesh • Used to reinforce the back of marble, granite and soapstone. It also ensures no cracks from the lower substrate, especially in surfaces with multiple joints or ﬂoors with heavy trafﬁc. • Increases traction resistance, prevents cracking, and also prevents possible humidity caused by moisture.

• Ideal protection for most non-porous surfaces during production, shipment and installation • Acts like a second skin to protect from workman activities, protects against scratching, paint overspray, etc • Clean release for easy removal without adhesive transfer • Demonstrates amazing strength and durability • Recommended for jobs up to 150 days SIZE

PART #

DESCRIPTION

PRICE $

24” x 500’ 30” x 600’ 24” x 500’ 30” x 600’

SIS-CPF24500-B SIS-CPF30600-B SIS-CPF24500-T SIS-CPF30600-T

Blue Protection Film Blue Protection Film Transparent Protection Film Transparent Protection Film

95.00 130.00 95.00 130.00

SIZE

PART #

DESCRIPTION

PRICE $

38”x150’

SC-FIBERMESH

Adhesive Backed Fiberglass Mesh

65.00

Electronic Gloss Meter

PART #

PRICE $

SC-GM

399.00

INSTALLATION & SHOP SUPPLIES

Temporary protection ﬁlm

INSTALLATION & SHOP SUPPLIE INSTALLATION & SHOP SUPPLIES 98

STEEL WOOL, BUFFING PADS, ETC Steel Wool 5 Lbs Reels

Stone

Steel Wool Hand Pads Our continuos ribbon of steel wool makes economical pads for a large variety of industrial, professional, and maintenance applications. Also, ideal for making your own hand or ﬂoor pads.

Stone steel wool hand pads delivers just the right amount of product for your project.

• Steel type - AISI 1008, low carbon steel • Approximately 25 ft per reel (1/2” thick, 4” wide and 10-1/2” diameter)

• Steel type, AISI 1008, low carbon steel • 12 pads per bag • Approximately 2” x 2” per pad

PART #

DESCRIPTION

PRICE $

PART #

DESCRIPTION

PRICE $

SIS-SWR0000 SIS-SWR000 SIS-SWR00 SIS-SWR0 SIS-SWR1 SIS-SWR2 SIS-SWR3 SIS-SWR4

Super Fine Extra Fine Very Fine Fine Medium Medium Coarse Coarse Extra Coarse

36.00 30.00 26.00 22.00 20.00 19.00 19.00 19.00

SIS-SWHP0000 SIS-SWHP000 SIS-SWHP00 SIS-SWHP0 SIS-SWHP1 SIS-SWHP2 SIS-SWHP3 SIS-SWHP4

Super Fine Extra Fine Very Fine Fine Medium Medium Coarse Coarse Extra Coarse

4.50 4.00 3.80 3.50 3.50 3.50 3.50 3.50

Cotton Bufﬁng Pads

Felt Bufﬁng Pads

Our premium quality felt pads can be used to apply or remove wax, then polish for a brilliant shine.

For use with polishing bars and powders

SIZE

PART #

DESCRIPTION

PRICE $

6” x 1” x 5/8” 6” x 1” x 5/8”

SIS-6BUFF-G SIS-6BUFF-M

For Granite - Yellow For Marble - White

13.00 13.00

PART #

DESCRIPTION

PRICE $

3” 4” 5”

SIS-FELT3 SIS-FELT4 SIS-FELT5

Felt Pad w/ Velcro Felt Pad w/ Velcro Felt Pad w/ Velcro

8.00 11.00 14.00

Hydrophilic Yellow Sponge

Hard Felt Bufﬁng Pads

• Super water absorption ability • Durable and long last

• For use with polishing bars and powders • Great for granite and hard stones

SIZE

PART #

DESCRIPTION

7-1/4”x 5-1/8”x 2-1/4” AAA-SPONGE Tile Grout Sponge

PRICE $

PART #

DESCRIPTION

PRICE $

1.95

SIS-5HFBP

Hard Felt Bufﬁng Pad 5/8-11

37.00

POWER CORDS, DUST COLLECTION SYSTEMS Yellow Jacket Power Cords 12/3

Dust Shrouds

• PowerLite indicator plug glows when the cord has power • 25, 50 or 100 ft. lengths (GFCI units: 2 ft.) • Include manual test-reset buttons

Makita Dust Shrouds feature universal mounts to accommodate all 4-1/2" and 5" Makita grinders. Soft brushes on the shroud’s rim prevent dust from escaping and help move the tool over the surface. Standard hose ﬁtting accepts most vacuum systems. • Air consumption: 16 cfm • 4-Spring suspension system • Removable edge piece allows for surface work ﬂush the other objects PART #

GFCIs

PART #

LENGTH

PRICE $

PART #

SOU-2883 SOU-2884 SOU-2885

25 ft 50 ft 100 ft

33.95 59.95 99.95

SOU-2817 SOU-2816

OUTLETS PRICE $ Single Triple

37.95 49.95

PRICE $

4-1/2 - 5" 7"

55.55 69,95

Ecoguard Type W5

Dust Collection Cover for Wide Kerf Cutting Unlike the Ecoguard Type C which uses a supplied dust collection bag, the Ecoguard Type W5 must be used with a vacuum, or other dust collection system, to successfully collect the dust and larger particles derived from using wider kerf diamond blades. Accepts any 5" or smaller diameter blade with 7/8" arbor; Fits most popular highspeed grinders.

Ecoguard Type CD • Dust & Water Guard for Core Drilling • This new wet/dry shroud can contain dust and water when drilling with up to a 2-1/2” diameter core bit.

PART #

DESCRIPTION

PRICE $

A-ECOGRDCD

5" - Dust Collection Cover

26.00

SIZE

PART #

DESCRIPTION

PRICE $

5” 5” 18”

A-ECOGRDW5 A-ECOW5KIT A-500026

Ecoguard Dust Collection Cover Type W Ecoguard W & Connector Hose Kit Flexible Connector Hose (1-1/2" Tapered-2-1/4")

107.85 111.50 16.00

Ecoguard Type C Hybrid Dust Collection Cover for Cutting

Ecoguard Type G Economy Grinding

Alpha® introduces the new Ecoguard designed for collecting dust when using our High-Speed Angle Grinder.

Designed for collecting dust when using a High-Speed Angle Grinder. The Ecoguard Type G is intended for use when grinding with wheels up to 5” in diameter. High-quality construction for heavy-duty applications. This dust collection cover creates a virtually dust-free environment when connected to a vacuum.

Dust Collection Cover for Larger Grinders

The Ecoguard Type C is for use when cutting with dry blades up to 5” in diameter. High-quality construction for heavy-duty applications. This hybrid dust collection cover eliminates the mess and can be used with or without a vacuum! SIZE 5” 18”

PART #

DESCRIPTION

A-ECOGRDCT Ecoguard Dust Collection Cover Type C A-201549 Ecoguard Type C Dust Bag A-500026 Flexible Connector Hose (1-1/2" Tapered-2-1/4")

Fits on most popular high-speed angle grinders.

PRICE $ 160.44 12.68 16.00

SIZE

PART #

DESCRIPTION

PRICE $

5”

A-ECOGRDGR

Ecoguard Dust Collection Cover Type EG

106.14

INSTALLATION & SHOP SUPPLIES

Extension Cords

MAK-195236-5 MAK-195386-6

DESCRIPTION

MAKITA KITS XT269 18V LXT® Lithium-Ion Compact Brushless Cordless 2-Pc. Combo Kit SPEED 1/2’’ Hammer Driver-Drill (0-500 & 0-2,000 RPM) with BL Motor delivers 530 in.lbs. of Max Torque

POWER Variable speed Impact Driver (0-3,400 RPM&0-3,600 IPM) delivers 1,500 in.lbs. of Max Torque

EFFICIENCY Efﬁcient BL Brushes motor optimizes battery energy use for up to 50% longer run time per charge

KIT INCLUDES: (1) Compact Brushless Hammer Driver-Drill (MAK-XPH12Z) (1) Brushless Impact Driver (MAK-XDT13Z) (2) Compact 2.0Ah Battery (MAK-BL1820B) OR (2) 4.0Ah Battery (MAK-BL1840B) (1) Rapid Optimum Charger (MAK-DC18RC) (1) Tool Case

BATTERY MAK-XT269R MAK-XT269M

2.0Ah 4.0Ah

269.00 299.00

XT505 18V LXT® Lithium-Ion Cordless 5-Pc. Combo Kit SPEED 6-1/2" Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood; weighs only 7.3 lbs.

PERFORMANCE Variable speed Recipro Saw delivers 0-2,800 strokes per minute with a 1-1/4" stroke; weighs 8.1 lbs.

The Kit also includes a variable speed ½” hammer driver-drill with 2 speed settings, and a variable speed impact driver with a full 1,460 inch-pounds of Max Torque. The 4-position ﬂashlight with Xenon bulb is a portable light source for improved visibility in dark conditions. You also get the category’s fastestcharging 3.0Ah batteries and the expansive breadth-of-line of the Makita 18V LXT® battery platform.

KIT INCLUDES: (1) 1/2" Hammer Driver-Drill (MAK-XPH10Z) (1) Impact Driver (MAK-XDT11Z) (1) Recipro Saw (MAK-XRJ04Z) (1) 6-1/2" Circular Saw (MAK-XSS02Z)

100

(1) Xenon Flashlight (MAK-DML185) (2) 3.0Ah Battery (MAK-BL1830B) (1) Rapid Optimum Charger (MAK-DC18RC) (1) Tool Bag

BATTERY MAK-XT505

3.0Ah

379.00

MAKITA KITS 9237CX3 7" Variable Speed Polisher Kit INNOVATION Variable speed dial and trigger enables user to match the speed to the application

The 7” Polisher combines consistent power and speed control with new durability and performance features. The result is a fast and powerful polisher for clear coat ﬁnishes, stone polishing, and more. The 9237C has a rubberized loop handle that provides added comfort for users and added protection for delicate work surfaces. For increased durability, the Polisher has a wire mesh intake cover to prevent wool bonnet ﬁbers and other debris from entering the motor. KIT INCLUDES: (1) 7" Hook and Loop Backing Pad (MAK-743052-5) (1) 7" Wool Bonnet, Hook and Loop, Compounding (MAK-192629-7) (1) 7" Wool Bonnet, Hook and Loop, Polishing (MAK-743403-A) (1) Pad Alignment/Centering Sleeve (MAK-262542-4)

(1) Wrench (MAK-783204-6) (1) Tool Bag (MAK-821016-X) (1) Side Handle (MAK-153489-2) (1) Loop Handle 9237C (MAK-455292-0)

BATTERY MAK-9237CX3 3.0Ah

275.00

XT324 18V LXT® Lithium-Ion Cordless 3-Pc. Combo Kit (3.0Ah) PERFORMANCE Brushless grinder delivers 8,500 RPM and weighs only 5.5 lbs. with battery for reduced operator fatigue

The kit is built for the pro-user who demands best-in-class Lithium-Ion cordless tools for drilling, driving, hammer-drilling, and fastening. The kit also includes an 18V Brushless Angle Grinder for corded grinding performance without the cord. Hammer Drill: (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque. Impact Driver: (0-2,300 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of Max Torque.

KIT INCLUDES: (1) 1/2" Hammer Driver-Drill (MAK-XPH01Z) (1) Impact Driver (MAK-XDT04Z) (1) 4-1/2" Cut-Off/Angle Grinder (MAK-XAG03Z)

(2) 3.0Ah Battery (MAK-BL1830) (1) Rapid Optimum Charger (MAK-DC18RC) (1) Tool bag

BATTERY MAK-XT324

3.0Ah

249.00

Makita XT9564 18V LXT® Lithium-Ion Cordless 3-Pc. Combo Kit (3.0Ah)

KIT INCLUDES: (1) 1/2" Hammer Driver-Drill (MAK-XPH01Z) (1) Impact Driver (MAK-XDT04Z) (1) 4-1/2" SJS™ High-Power Angle Grinder (MAK-9564CV)

(2) 3.0Ah Battery (MAK-BL1830) (1) Rapid Optimum Charger (MAK-DC18RC) (1) Tool bag

BATTERY MAK-XT9564

3.0Ah

349.58

101

VARIABLE SPEED GRINDERS 4-1/2" Makita 9564CV Makita’s 4-1/2” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longerlasting stone grinding and polishing performance. The 9564CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.

• 13.5 AMP motor • 2,800-10,500 RPM electronic variable speed • Electronic speed control maintains speed under moderate load • Super Joint System helps prevent kickback while protecting gears

MAK-9564CV MAK-CB340

4-1/2’’ Makita 9564CV Carbon Brush Set

169.00 10.95

5" WEV15-125 HT

MET-WEV15-125HT MET-316055220

5’’ Metabo WEV15-125 HT Carbon Brush Set

189.00 10.95

• Optimum processing of stone: robust, powerful angle grinder with gear reduction and reduced, adjustable speed for material-friendly working • NEW, patent-pending Metabo Marathon-motor with up to 50% more torque and up to 20% higher overload capacity for quicker material removal and longer service life • Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customized speeds to suit the application material and speeds that remain almost constant, even under load • NOW EVEN FASTER: M-Quick System for tool-free disc change at the touch of a button by means of M-Quick ﬂange nut • Side handle Metabo VibraTech (MVT) handle vibration damping for convenient continuous mode • Metabo S-automatic Safety Clutch: minimizes kick-back to the lowest level when the disc jams unexpectedly - for maximum user safety and swift progress

See Dust Shrouds and Eco Guards on page 95 103

VARIABLE SPEED GRINDERS 4-1/2" GA4542C SJS II Angle Grinder

5" GA5042C SJS II Angle Grinder

Labyrinth Construction Leaf Spring and Cam Gear Drive

SJS (Super Joint System) II Technology

“Tool-less” Wheel Guard Adjustment Vibration Absorbing Side Handle

• 12 AMP motor • 2,800-11,000 RPM electronic variable speed • Electronic speed control maintains desired speed under load • Super Joint System helps prevent kickback & protects gears

MAK-GA4542C MAK-CB340

4-1/2’’ Makita GA4542C SJS II Carbon Brush Set

186.00 10.95

MAK-GA5042C MAK-CB340

5’’ Makita GA5042C SJS II Carbon Brush Set

5" Makita 9565CV

5" L 1506 VR

• 12 AMP motor • 2,800-10,500 RPM electronic variable speed • Electronic speed control maintains desired speed under load • Super Joint System helps prevent kickback while protecting gears

• 11 AMP motor • 2,200-6,800 RPM • Overload protection • Electronic speed control maintains desired speed under load • Includes guard, handle & wrench

MAK-9565CV MAK-CB336

5’’ Makita 9564CV Carbon Brush Set

175.00 10.95

• 13.5 AMP motor • 2,800-9,600 RPM electronic variable speed • Electronic speed control maintains speed under moderate load • Up to 50% more torque than previous models • For metal working

MET-WEV15-125 MET-316055770

5’’ Metabo WEV15-125 Carbon Brush Set

FLEX-L1506VR FLEX-250.816

5’’ FLEX L 1506VR Carbon Brush Set

186.00 10.95

271.00 8.95

5" WEV10-125

5" WEV15-125 QUICK

104

• 12 AMP motor • 2,800-11,000 RPM electronic variable speed • Electronic speed control maintains desired speed under load • Super Joint System helps prevent kickback & protects gears

• 9.5 AMP motor • 2,800-10,500 RPM electronic variable speed • Electronic speed control maintains speed under moderate load • Up to 20% more overload capacity in extreme applications

222.00 10.95

MET-WEV10-125 MET-316055200

5’’ Metabo WEV10-125 Carbon Brush Set

155.00 10.95

SINGLE SPEED GRINDERS 4-1/2" Makita 9564P

MAK-CB325

Carbon Brush Set

4-1/2" Makita 9557PB

4.75

5" Makita GA5010Z

MAK-CB303

Carbon Brush Set

MAK-CB325

Carbon Brush Set

4.75

5" Makita 9005B

8.50

MAK-CB124

Carbon Brush Set

6.00

Carbon Brush Set

19.95

LARGE GRINDERS 6" Makita 9566CV

7" GA7021

7" GA7020

MAK-CB336

Carbon Brush Set

10.95 MAK-CB204

6" W 14-150 ERGO

7" Makita GA7911

• 12 AMP motor • 9,700 RPM • 3-position side handle and rear handle for grinding/cutting

MET-W14-150ERGO MET-316035070

6" Metabo W 14-150 ERGO Carbon Brush Set

182.50 15.75

MAK-CB154

Carbon Brush Set

8.50

105

ELECTRIC WET POLISHERS 4" Makita PW5001C

MAK-CB336

Carbon Brush Set

5" LW 1503

10.95

Carbon Brush Set

5" LE 12-3 100 Wet

5" L 12-3 100 Wet

Variable Speed: 9.3 AMP / 1,200 - 3,700 RPM

Single Speed: 9.3 AMP / 3,700 RPM

FLEX-LE12-3 FLEX-280.291

Variable Speed Carbon Brush Set

367.50 16.95

5" PWE 11-100

MET-PWE11-100 MET-316047230

FLEX-L12-3 FLEX-280.291

Single Speed Carbon Brush Set

8.95

323.50 16.95

5" LW 603 VR

5’’ Metabo PWE 11-100 Carbon Brush Set

319.00 10.95

FLEX-LW603VR FLEX-211.71

5’’ Flex LW603VR Carbon Brush Set

4.5" LW 1509

5" VSP 320 Polisher

• 7.1 AMP motor • High speed grinder • 8,300 RPM • Center and external water feed • Built-in GFCI

• Variable speed 700-2800 RPM • Specially coated spindle reduces friction, extends life of seals • Adjustable splash guard and ventilation cap help keep water out of motor housing • 15' Hose length w/Easy On, Easy Off sleeve for better mobility • Inline GFCI

FLEX-LW-1509 FLEX-250.816

106

FLEX-250.816

4.5’’ FLEX LW 1509 Carbon Brush Set

459.95 8.95

A-VSP-320

5’’ Alpha VSP 320 Polisher

521.50 12.95

323.00

PNEUMATIC WET TOOLS Pneumatic Wet Polisher w/ Rear Exhaust

Pneumatic Wet Polisher

275.00

210.00

4" PLW 923 S

5" Waterfed Air Grinder

• 3,600 RPM • Accepts 3", 4", or 5" discs • Center water feed with Rear exhaust • 15.19 CFM air consumption with 90 PSI • Hose Size 1/4" • Air Inlet 1/4" • Lightweight 2.8 lbs, compact design

• Center water feed with side exhaust • Air Cons: 0.46 m3/min 8 CFM minimum 16.2 CFM optimal • Air pressure: 90 psi • Lightweight, compact • Max Speed: 11,000 rpm • Air Hose and Water Hose not included

Pneumatic Wet Polisher

FLEX-PLW923S

259.00

Cyclone MVP

PSG-125

More power and dependability make the MVP the industry’s most exciting new entry into the wet polishing market. Includes an innovative automatic oil injection system with a visible level chamber to keep it in top form under the most demanding use.

• Powerful 1.4 HP motor with speed control governor • 33 CFM air consumption • 90 PSI air pressure • Reversible safety lever throttle • Weight: 4.6 Lbs. • Built-in oil port for daily maintenance • Adjustable rotating exhaust • Max Disc capacity: 5" x 1/4" x 7/8"

5" Pneumatic Wet Polisher

C-CMVP45

High Performance Pneumatic Grinder

A-PSG-125

715.00

107

PNEUMATIC WET TOOLS PSG-125 Diamond Cutting Kit

This system is recommended for virtually dust-free masonry cutting applications using a diamond blade. It ﬁts not only standard cutting blades but also wide kerf blades for tuck pointing, crack chasing and grout removal. Also, great for curve cutting blades for sink-hole cut out applications. To keep the dust to a minimum, an optional water feed system is available.

PART #

DESCRIPTION

PRICE $

A-5480-1301

PSG-125 Diamond Cutting Kit

781.70

PSG-125 Metal Cutting Kit A unique industrial angle grinder cutting kit designed for ferrous and non-ferrous metal cutting applications with abrasive cut-off wheels or carbide blades. A safety guard, along with a base plate, eliminates the dangerous kick-back typical on hand-held grinders. This new system cuts angle iron, c-channel, conduit, spiral duct, metal studs, rebar, stainless steel, aluminum plates and bars, steel palates, threaded rods, unistrut as well as many other materials. PART #

DESCRIPTION

PRICE $

A-5480-1303

PSG-125 Metal Cutting Kit

812.60

PART #

DESCRIPTION

PRICE $

A-5480-1302

PSG-125 Grinding Kit

781.70

PSG-125 Dust-Free Grinding Kit

This system is designed for virtually dust-free sanding, grinding, paint and coating removal with up to 5” discs. A removable ﬂat cover allows grinding right to the edge while the dust cover prevents dust from escaping. Also great for surface preparation, whether it is on concrete, metal, wood, composite or other surfaces. To keep the dust to a minimum, an optional water feed system is available.

Pneumatic Tool Lubricant

108

PART #

PRICE $

HARD-40706

8.95

16 oz. bottle, formulated to ISO 46 standards: inhibits rust, non-corrosive

PNEUMATIC WET TOOLS BD-2321WR 5" Polisher

BD500 5" High Speed Pneumatic Wet Grinder

• 10,000 RPM • 15 CFM air consumption • 9" length. 4lbs. • 90 PSI • 15 cfm air consumption • 5 hp min. air compressor required

BAR-160458

BAR-166553

5" Alpha AIR-680

Alpha Mini AIR-300

Filter/Regulator Manifold Systems The Filter/Regulator helps eliminate potential issues caused by rust or contamination in the pipes or connectors feeding the pneumatic tools. It also helps prevent pressure drops when using a large volume of air, so the pressure can be set on the tools at 85 PSI, while the main system can run at 125 PSI. The systems, which come in two sizes (53 CFM & 106 CFM), consist of a Filter/Regulator with a shut off/dump valve, and an aluminum manifold with three or more aluminum quick disconnects.

PART #

SIZE

TYPE

FOR

THREADS

DESCRIPTION

PRICE $

A-1030-0021 A-1030-0022 A-1030-0023 A-1030-0024

53 CFM 53 CFM 106 CFM 106 CFM

3/8" 3/8" 1/2" 1/2"

3 couplers 3 couplers 4 couplers 4 couplers

3/8" NPT 1/2" NPT 1/2" NPT 3/4" NPT

Includes (3) 1/4” Female NPT Plugs Includes (3) 1/4” Female NPT Plugs Includes (3) 1/4” Female NPT Plugs & (1) 3/8" Female NPT Plug Includes (3) 1/4” Female NPT Plugs & (1) 3/8" Female NPT Plug

310.46 310.46 375.50 375.50

109

PNEUMATIC WET TOOLS Alpha PSC-150

Pneumatic Stone Cutter

Equipment Included

110

ELECTRIC DRY POLISHERS AND SANDERS 7" Makita 9227C

MAK-CB303

5" L 1503 VR

Carbon Brush Set

8.50

6" PE14-2 150

FLEX-369.640

Carbon Brush Set

8.95

7" Variable Speed Vertical Sander GV7000C

Carbon Brush Set

19.95

7" Disc Sander 9218SB

MAK-CB124

FLEX-250.816

Carbon Brush Set

MAK-CB303

Carbon Brush Set

8.50

5" Vertical Sander GV5010

5.95

MAK-CB75

Carbon Brush Set

10.95

DIE GRINDERS Die Grinder GD0800C

MAK-CB336

Carbon Brush Set

1/4" Die Grinder GD0601

10.95

MAK-CB325

Carbon Brush Set

4.75

111

CIRCULAR SAWS 5.5" Makita 5005BA

5" Makita 4101RH

DESCRIPTION

Circular Saw MAK-CB124 Carbon Brush Set

Circular Saw MAK-CB303 Carbon Brush Set

5.95

4.375" Makita 4100NH

8.50

7-1/4" Makita 5477NB • Powerful 15 AMP motor • High quality, heat treated hypoid gears are engineered for long lasting performance • 0° - 51.5° bevel capacity • Large cutting capacity (2-3/8” at 90°, 1-3/4” at 45° abd 1-9/16” at 50°)

DESCRIPTION Circular Saw MAK-CB303 Carbon Brush Set

DESCRIPTION Circular Saw MAK-CB154 Carbon Brush Set

8.50

5" Alpha AWS-125

Guide Rail System Create straight cuts every time

112

8.50

4.5" Alpha AWS-110

Alpha® has re-designed its successful Guide Rail system to be more easily utilized and transported! This accessory for the AWS-110/AWS-125 Stone Cutters, is made of high-quality cast aluminum and was designed to be used with the Alpha® Universal Carriage Assembly. The sturdy straight edges are available in three lengths and may be purchased individually or as a kit. PART #

DESCRIPTION

PRICE $

A-GR-AG04 A-GR-AG07 A-GR-AG12 A-GR-AGKIT A-ECO-CAM A-AWS-UCAM

4 ft Guide Rail with 2 Clamps 7 ft Guide Rail with 2 Clamps 12 ft Guide Rail with 2 Clamps, Connector & 4 Screws Guide Rail Bundle (3 Rails, 6 Clamps, Connector, 4 Screws) Ecocutter Carriage Assembly Universal Carriage Assembly

151.95 214.64 322.00 654.33 88.95 101.46

CIRCULAR SAWS Omega Diamond Blue Ripper Sr. Rail Saw These saws can cut through 4 cm thick stone. The 3 hp can cut 2 cm ABSOLUTE BLACK granite up to the incredible speed of 10 ft. per MINUTE! The 5 hp will cut the same stone TWICE AS FAST! The Blue Ripper rail saw has up to a 10 feet per minute cut speed and powerful 3 hp or 5 hp 220 volt motor. It is equipped with a 60mm blade arbor to accommodate bridge saw style blades. All connections are mounted vertically, and it features a one hand water disconnect. This saw also has an easy to adjust locking height adjustment and weighs only 79 lbs. It has the ability to cut through 4 cm stone in a single pass. Both include a blade suitable to perform well with the saw, 10 ft water hose with inline ball-valve shut off, and GFCI. Fits on all Blue Ripper Rails. Rails sold separately. PART #

DESCRIPTION

OME-070-373 Blue Ripper Sr 220-240v 5hp OME-873-744 Blue Ripper Sr 220-240v 3hp

PRICE $ 3,756.00 3,483.00

Omega Diamond Blue Ripper Jr. Rail Saw This powerful, light-weight, portable rail saw makes cutting granite countertops a breeze! The Blue Ripper Jr. rail saw takes full plunge cuts past 4 cm deep, operates at up to 4 fpm cutting speed. It accepts up to 8" blade sizes and weighs only 19.8 lbs. It has a standard 5/8" blade arbor. This saw is powered by an included 4,300 RPM Makita 7-1/4" Hypoid (5477NB) saw conﬁgured to accept an 8" blade. This kit includes a blade, 10 ft water hose with inline shut off, and GFCI.

PART #

DESCRIPTION

PRICE $

OME-948-421

Blue Ripper Jr 110-120v with Makita

1,373.00

Cutting through 4cm

Fits on all Blue Ripper Rails. Rails sold separately.

Template placement when ﬂuting with the Blue Ripper Jr.

Omega Diamond Blue Ripper Rails The BASIC rail is designed to be clamped to the stone using simple C-clamps or external vacuum pods. Simple and effective, they are practically a lifetime investment! The VACUUM edition has built-in vacuum pods, each designed to provide the same holding force as a 5-gallon bucket of water sitting on top of that pod - assuming at least 15 inHg of vacuum. Now with integrated venturi vacuum generator!

Super tight seams

The strongest rail on the market! Single piece stainless steel design makes for smooth, accurate cuts across the entire length of your stone. PART # OME-199-129 OME-060-288 OME-132-448 OME-692-990 OME-766-006 OME-692-683 OME-040-865 OME-740-841 OME-828-017

BLUE RIPPER RAIL DESCRIPTION

PRICE $

Basic Edition, Combo Pack 7ft 8in & 12ft 4in 872.00 Basic Edition, 5 ft 184.00 Basic Edition, 7 ft 8in 322.00 Basic Edition, 10 ft 471.00 Basic Edition, 12 ft 4in 595.00 Vacuum Edition, Combo Pack 7ft 8in & 12ft 4in 1,694.00 Vacuum Edition, 7 ft 8in 683.00 Vacuum Edition, 10 ft 906.00 Vacuum Edition, 12 ft 4in 1,100.00

113

CIRCULAR SAWS Alpha Countertop Trim Kit The Countertop Trim Kit was created for those who work with pre-fabricated countertops and have the need to trim the piece for a custom ﬁt. The kit combines our AWS-125 Wet Stone Cutter with a universal carriage assembly and a 4’ guide rail to create a clean, straight cut. All of the products are of high-quality construction and are easy to setup and operate. A must for everyone who will be cutting and trimming slabs! PART #

DESCRIPTION

PRICE $

A-5480-4125

Countertop Trim Kit

495.25

Complete Trim Kit for a Custom-Look

INCLUDES 1 EA OF THE ITEMS BELOW: A-DEE005 A-AWS-125 A-GR-AG04 A-AWS-UCAM A-170007

5” - 12,200RPM - 7/8” arbor Wet Stone Cutter 5” 110V 4’(1.2m) Guide Rail with 2 Clamps Universal Carriage Assembly Tools for Fabricators DVD

5" CS40 Wet Saw • Built in GFCI • Uses 5" x 7/8" blade • Powerful 12 amp motor with a no load speed of 12,000 RPM • Tilting range of 0 - 45 degrees • Max cutting thickness at 90 degrees - 1.6" PART #

DESCRIPTION

PRICE $

FLEX-CS40

PSG-125 Grinding Kit

199.95

PROFESSIONAL SAWS The Fab King Work Center & Tooling

RYE-Corp manufacture the next step in counter top fabrication equipment. The Fab King utilizes a 3hp motor on a rigid cantilever frame. This system now allows for the use of Master/Sector tooling for edge proﬁling and also increases the router travel to 9½ feet. The Fab King requires little or no experience to operate. The Fab King can cut out any sink shape using a template (which means no mistakes and precise dimensions) in as little as 8 minutes. It can drill utility holes in seconds with minimal tool wear. Edge proﬁling is quick and easy with no threat of scratching the surface. Other features of the machine include surface polishing and honing, and back-splash polishing. PART #

DESCRIPTION

PRICE $

RYE-FABKING

Work center & tooling

19,900.00

Delivery, installation, training and hardware not included. Call for pricing.

114

SPECIFICATIONS:

FEATURES:

Power: 220 volt single phase • Travel: 114", 30" and 8" Dimensions: 11ft 9"L x 5ft 11"H x 3ft 8" W • Connection: 1/2 Gas Water Feed RPM: Variable 2,700 - 10,000 • Weight: 990 lbs

• Dust free operation • Rugged Construction • Precision control raise/ lower with friction brake • 3 point adjustable work surface • Install in minutes • Full 1 year manufacturers™ warranty

PROFESSIONAL SAWS Husky Gantry Saw

The Husky’s controls are easy to use and you can operate the saw using the control panel and the wireless remote at the same time. Standard features include: heavy duty 6’x10’ tilting table that stops at 0, 450, 900 and 1350 with variable locking positions; precision machined gantry and bridge; 20 HP, 220v, 3 phase direct drive VEM motor, 18” diameter blade capacity. Water solenoid automatically turns the water on and off with the spindle motor; high intensity laser and convenient control panel with amperage guage and digital readout. Includes 16 inch diamond blade. PART #

DESCRIPTION

PRICE $

RYE-HUSKY Husky Gantry Saw 52,900.00 RYE-HUSKY-3P 3 Phase to Single Phase Converter 3,750.00 Delivery, installation, training and hardware not included. Call for pricing.

STRUCTURE: Precision machined rail and bridge. Overall dimensions are 15’ wide, 13’ deep, 9’ tall. SAW FEED: Saddle travels on 12 ﬂanged rollers. Powered variable speed movement. GANTRY MOVEMENT: Saddle travels on 12 ﬂanged rollers. Powered variable speed movement.

OPERATOR CONTROLS: Convenient control panel with amperage gauge and digital readout. Wireless operation remote control with 2 speed 3 axis control, saw motor stop/start, fwd cut maintain OPTIONAL: 8 inch touch screen with programmable movement TURNTABLE: Heavy duty 6’ x 10’ rotating turntable with hydraulic tilting and positive stops set at 0, 45, 90, and 135 degrees. Variable locking positions.

VERTICAL MOVEMENT: 16” movement. With adjustable limit switches. MAIN MOTOR SPINDLE: 20 HP, 220v, 3 phase direct drive VEM motor, 18” diameter blade capacity. Miter cut capability.

LASER LIGHT: High intensity laser to align material to blade path included. WEIGHT OF MACHINE: Approximately 10,000 lbs

Renegade Gantry Saw

Renegade comes with a 10hp, direct drive VEM saw motor. Standard features include: heavy duty 6’x10’ tilting table that stops at 0, 450, 900 and 1350 with variable locking positions; precision machined gantry and bridge; 10 hp, 220 volt 3 phase motor; high intensity laser and convenient control panel with amperage gauge. Includes a 14 inch blade. PART #

DESCRIPTION

Delivery, installation, training and hardware not included. Call for pricing.

RYE-RENEGADE Renegade Gantry Saw RYE-RENEGADE-DR Digital Readout for Gantry Movement RYE-RENEGADE-M Power Gantry Movement RYE-RENEGADE-3P 3 Phase to Single Phase Converter

STRUCTURE: Precision machined rail and bridge. Overall dimensions are 14’ wide, 13’ deep, 8’ tall.

OPERATOR CONTROLS: Convenient control panel with amperage gauge.

SAW FEED: Saddle travels on 8 ﬂanged rollers. Powered variable speed movement. Water solenoid automatically turns the water on and off with the spindle motor.

TURNTABLE: Heavy duty 6’ x 10’ rotating turntable with hydraulic tilting and positive stops set at 0, 45, 90, and 135 degrees. Variable locking positions.

GANTRY MOVEMENT: Hand operated with lock.

LASER LIGHT: High intensity laser to align material to blade path included.

PRICE $ 39,900.00 2,400.00 3,400.00 4,285.00

VERTICAL MOVEMENT: 6” movement. Actuator driven. WEIGHT OF MACHINE: Approximately 8,000 lbs. MAIN MOTOR SPINDLE: 10 HP, 220v, 3 phase (single phase optional), 60 cycle belt driven. 16” diameter blade capacity.

115

PROFESSIONAL SAWS Rubi DT-180 Evolution 7" Professional Tile Saw W/Stand The DT-180 Evolution wet saw from Rubi will power through ceramic, porcelain, granite, ﬂoor tiles, wall tiles, marble and masonry products. This saw will accurately cut up to a 24" rip cut, 18" diagonal on tiles up to 2-1/4" thick. Also capable of miter, bevel and plunge cuts. INCLUDES: 7" premium blade, folding stand, miter guide & operator's manual. • Powerful 9 amp motor • Miter guide for precision cuts from 0° to 45° left and right • Bevel 45° cuts can be made using this saw by tilting motor head • Plunge cuts possible by lowering motor head allowing pieces to be cut from the center • Die-cast aluminum table provides solid material support • Precision sealed bearing rollers deliver a smooth and straight cutting action • Removable water nozzles for easy cleaning and maintenance • Adjustable ﬂow pump provides water to the cutting wheel • Wrap around splash guard captures water from the cutting wheel to minimize overspray • Lightweight chassis design is steel reinforced for maximum durability • Cutting table detaches for easy cleaning • Supplied with a folding stand • 120V AC/9 Amps • 6500 RPM • Weight 31 lbs PART #

DESCRIPTION

PRICE $

RUB-58974 RUB-58957

DT-180-Evolution w/ stand - 24" (7" blade included) Stand DT Evolution 180

425.00 59.00

INCLUDED

Rubi DT-180 Evolution 7" Professional Tile Saw W/Stand The NEW DT 250 Evolution from Rubi accurately rips up to 24 in. tile, 18 in. diagonal, and cuts ceramic, porcelain, granite marble and masonry products up to 3-3/4 in. thick. INCLUDES: Rubi DT 250 Evolution tile saw, mobile stand, hex wrenches, 10" Arrowhead Premium diamond blade, cutting wheel wrench, miter guide, table extension, submersible pump, water trays and drying rack. • Powerful 15 Amp motor with brake • Plunging head for controlled non-through cuts • Head adjusts for accurate 0°, 22.5°, or 45° bevel cuts • Precision sealed bearing rollers deliver a smooth and straight cutting action • Rubber topped aluminum table provides a strong and durable work platform • Steel mobile stand with 8 in. wheels for easy transport and jobsite set-up • Lightweight chassis design reinforced with aluminum and steel for maximum durability • Cutting table detaches for easy cleaning • 120 V AC, 15 Amps • No Load Speed: 4,000 r/min. (RPM) • Cutting Wheel Diameter: 10 in. • Rip Capacity: 24 in. • Diagonal Capacity: 18 in. • Max Depth Of Cut: 3-3/4 in. • Weight: 87 lbs.

INCLUDED

116

PART #

DESCRIPTION

PRICE $

RUB-58995

DT Evolution 250 24" mobile stand included

999.00

PROFESSIONAL SAWS Rubi Diamant DC-250 1200 1.5 HP 48" Tile Saw The Rubi DC-250 1200 is a professional 1.5 HP tile saw that has a brand new precision moving head and rail system. Ideal for wall tiles, floor tiles, porcelain, ceramic, stoneware, marble and other materials. Plunge cut and miter cut. INCLUDES: 10” porcelain premium blade and power cable. 2 years warranty. Cutting length: 47-7/16” (33” x 33” diagonal). • Mobile head cutter of maximum functionality • Head height adjustment allowing to adjust the cutting height • Aluminum square, easy to regulate (0° to 60°) • Extruded aluminum tables, removable for easy cleaning of the machine • Folding legs with built-in wheels to more comfortable transport • Single phase motor and direct transmission, 1.1 kW (1.5 hp) with thermal protector • Water pump cooling blade with ﬂow control • Rigid chassis structure • Tailstock on bearings and hinged at 45° for miter cuts • Max cutting length: 47-7/16" • Max diagonal cut: 33" x 33" • Max cutting thickness: 3-1/2" • Arbor size: 5/8" • Dimensions: 67-5/16 x 31-3/32 x 51-9/16 • Weight (not packaged): 128 lb. • Voltage: 120V – 60Hz USA • Power: 1.5hp. 2790 RPM • 2 Year Warranty

INCLUDED

PART #

DESCRIPTION

PRICE $

RUB-54924 RUB-55948

DC-250-850 (1.5hp) 38" DC-250-1200 (1.5hp) 47.5"

1,215.00 1,595.00

Rubi DS-250N 1500 Laser & Level 3 HP 60" Tile Saw

Call for pricing on 220v options

The Rubi DS-250N 1500 is a professional heavy duty 3 HP tile saw for cutting ceramic, granite, porcelain, marble and other materials. INCLUDES: 10" premium porcelain diamond blade, laser, level, water pump and power cable • Aluminum structure. Lighter, and maximum resistance to working conditions • Robust aluminum guide, folding at 45°, perfect miter • It does not plunge cut • Removable aluminum tables for easy cleaning of the machine • With overload security switches • Safety protector for segmented blades • With lateral stop for repetitive cuts • 2mW line laser • Level for easy field installation • Double set of flanges, one especially designed for miter cuts • Water pump refrigeration of blade with flow control valve • Motor assembly mounted on sliding bearings for maximum precision and reliability, perfect finishes • Powerful direct drive 3 HP motor • Max cutting length: 59 3/4" • Max diagonal cut: 42" x 42" • Max cutting thickness: 2-1/16" • Arbor size: 1" • Dimensions: 86" x 34" x 16" (height without legs) • Weight: 220 lbs • Voltage: 220V - 60Hz • Power: 3hp. 3400 RPM • 2 Year Warranty

INCLUDED

Mobile head machine for high accuracy, ideal for miter cuts PART #

DESCRIPTION

PRICE $

RUB-52934 RUB-52944

DS250N-1300 51" (3hp)- 120V DS250N-1500 61" (3hp)- 120V

2,745.00 2,890.00

117

PROFESSIONAL SAWS Rubi DX-350N 1300 Laser & Level 3 HP 51" Tile Saw The Rubi DX-350N 1300 is a professional heavy duty 3 HP tile saw for cutting bricks, granite, porcelain, marble and other building materials. This saw fits 12" or 14" blades with 1" arbor and allows miter and plunge cuts. INCLUDES: One 12" premium diamond blade, laser and level, water pump and power cord. • Motor assembly mounted on sliding bearings for maximum precision and reliability, perfect finishes • High performance plunge effect with maximum cutting height • Robust aluminum guide, folding at 45° for miter cuts • Aluminum structure. Lighter, and maximum resistance to working conditions • Removable aluminum tables for easy cleaning of the machine • With overload security switches • Safety protector for segmented blades • With lateral stop for repetitive cuts • 2mW line laser • Level for easy field installation • Water pump refrigeration of blade with flow control valve • Powerful direct drive 3 HP motor • Voltage: 120V - 60Hz • Power: 3hp. 3400 RPM • Max cutting length: 58-1/2" • Max diagonal cut: 41-5/16" x 41-5/16" • Max cutting thickness: 4-1/8" (up to 8-1/4” cutting both sides) • Dimensions: 78" x 34" x 56" (height with legs) • Weight: 215 lbs • 2 Year Warranty

INCLUDED

Mobile head machine with plunge effect for total versatility PART #

DESCRIPTION

PRICE $

RUB-52918

DX-350-1300 58" 12" & 14" blade (1" arbor)

3,215.00

ACCESSORIES FOR RUBI PROFESSIONAL SAWS PART #

DESCRIPTION

PRICE $

RUB-51916 RUB-54822 RUB-54999 RUB-51914

Tile Fixer DV/DC/DS/DX Lateral Stop for DW-NL/DC/DS/DX Laser e Level Kit DV/DC/DS/DX Roller Table Extension DV/DW-N/ DC/DS/DX (from 2013

99.00 39.50 26.95 319.50

PART #

DESCRIPTION

PRICE $

RUB-54993 Table Extension DV/DC 105.00 RUB-54844 Adjustable Length Lateral Stop DC/DS/DX 70.50 RUB-56137 Miter Accessory DS/DX Call for pricing Table Extension DS/DX RUB-54991 118.00 Splash Protector DS-N/DX/DX-N RUB-51810 82.00

SURFACE POLISHING MACHINE LCP 1703VR Planetary Gear / Belt Driven / 3-Head Polisher • Rugged, reliable hand-operated 12" platform made of Duralimin, a hardened, anodized aluminum • Delivers the perfect speed for high performance grinding, honing and polishing of concrete, granite and marble • Belt driven design for quieter operation and less heat buildup • Slurry Guard brush design for ease of movement on all surfaces • Center water feed for wet applications can be shut off for efﬁcient dry operation • Uses 3" and 5" diamond polishing pads • Weight: 29 lbs. • 110V/60Hz • 10 AMP • Driver speed: 1,100 - 3,400 RPM

118

PART #

PRICE $

FLEX-LCP1703VR

2,318.00

• Platen speed: 600 - 1,930 RPM • Platform speed: 157 - 481 RPM • Includes 3,5” Aluminum backers 3 Heads are better than one! The perfect machine for the perfect ﬁnish on concrete, granite and marble surfaces!

Hydroglading Base. • Plastic material with designed grooves for hydroglading and cooling. • Water nozzles for cooling. • Counterweight and water intake valve. 3 1⁄2 HP Milwaukee motor. • Electronic variable speed 10k - 20k rpm. • 120 AC voltage, 15 Amps. • Dial speed. • Easy-Adjust Locking Height. • 1⁄2” collet. Steel Shaft adapter to ﬁt standard router bits. Two Collet Wrenches. Heavy Duty Long Lasting Water Intake Hose. Strong Double Face Cardboard Box for secure shipping.

Advantages: • Powered with 120 Volts / 15 amps that can be supplied by any household or shop. No 220 Volts wiring or special transformer needed. • EASY TO CARRY to any job outside the shop. • Its High Productivity 3.5 Hp motor will ENDURE HEAVY USAGE on a production line. • NO DOWN TIME when maintenance or repairs is needed. Motor can be mounted or dismounted in seconds and sent for fast repair or can be replaced immediately. • Will DO THE JOB better than any expensive imported machine. • ECONOMICAL • Proudly MADE In the USA

• Wear safety goggles or glasses with side shields when operating the machine. • To reduce injury or electric shock never immerse your tool in water or allow a liquid to ﬂow inside the electric motor. Always use a surge protector, Protector is not supplied. • Always unplug the router before attaching or change tool bits.

119

STONE ROUTERS Red Ripper Ultralight™ Stone Router 110-120v

Great for Grinding and Polishing Sink Holes Weighing in at only 12 lbs, you can easily pick up this router with one hand! It is built for profiling sinks and edges, and is perfect for prefabs. The built-in hydroplaning base helps the router move smoothly over the surface of the stone without scratching. Works on both natural and engineered stone. While the router is light, it is no lightweight when it comes to the size of bits it can use - almost all standard 7/8 bore with M10-1.5 bolt router bits will fit and be usable, including all common 2, 3, and 4cm bits. Pencil Profile - Rough

PART #

DESCRIPTION

PRICE $

OME-015-764 OME-949-931 OME-808-488

Base + Makita 9564CV Base + Makita 9564CV + Water Feed Option Base Only

937.00 1,062.00 799.00

Red Ripper Ultralight on Stone

Red Ripper Sr™

Stone Router 220-240v With the unique NWS belt drive you can cut harder and faster with a 3hp motor than with a 5hp basic ﬂat belt motor. This results in less cost to you now and in the future!

2HP Router

• Rubber non-scratch hydroplaning base • 8100 RPM spindle for greater tool life • 2hp 110v at 18.8 full-load amps • Unique NWS belt system • Single-hand quick water disconnect • Uses standard 7/8" bore router bits • All connections mounted vertical Included with all models: 10 foot quick-disconnect water line. Inline GFCI. PART #

DESCRIPTION

PRICE $

OME-609-344 OME-533-235 OME-062-714

3HP Fixed Speed - 220v 3HP Variable Speed - 220v 2HP ﬁxed Speed - 110v

3,299.00 4,075.00 3.025.00

3HP Variable Speed

120

SPECIALTY MACHINES Pitbull BigDog Hydraulic Stone Chiseler The PitBull BigDog is a powerful tool that can chisel almost any kind of natural stone or man-made stones to make beautiful decorative edge designs. Its modular jaw system allows the operator to switch the mining grade carbide chisel teeth in seconds. • Up to 5 tons of directly applied pressure • Shear 2cm (3/4in) to 8cm (3-1/4 in) stone without adjustments • Bites artiﬁcial and laminated stone • Affordable mining-grade carbide teeth • Air-powered hydraulics for power and safety • Up to 3 inches per bite

OME-721-820 $3,150.00

OME-721-831 $2,750.00

OME-844-067 $645.00

Includes: Hydraulic Stone Chiseler Head with Hose + Air-Driven Hydraulic Pump + 5 quick change mining grade carbide teeth sets for multiple edge designs.

Includes: Hydraulic Stone Chiseler Head with Hose + Air-Driven Hydraulic Pump + 3 quick change mining grade carbide teeth sets for multiple edge designs.

Air Driven Hydraulic Pump 100-120 PSI at 15-20 CFM

Teeth Styles: Soft Stone, Laminate Stone, Narrow, Scallop, Reverse Scallop.

Teeth Styles: Soft Stone, Laminate Stone, Narrow.

OME-365-421 Soft Stone Set $159.00 (pair)

OME-980-304 Laminated Stone Set $158.00 (pair)

OME-673-385 Narrow Set $126.00 (pair)

OME-944-481 Scallop Set $360.00 (pair)

OME-076-830 Reverse Scallop Set $240.00 (pair)

Known as the generalpurpose teeth, includes two 3" long carbide cutters preinstalled in two holders designed for chiseling any single-thickness stone, but especially the super-soft stones like travertine.

Includes two 3" long carbide cutters pre-installed in two holders designed for chiseling laminated stone up to 6cm.

Includes two 1.5" long carbide cutters pre-installed in two holders designed for chiseling super hard laminated stone when the Laminated Stone Set isn't powerful enough.

Includes two each left- and right-hand scallop carbide pre-installed in two holders, designed to create a scalloped chiseled edge in both single and double thickness stone.

Includes two 3" wide reverse scallop carbide pre-installed in two holders. Produces scalloped edges on solid or laminated materials. Great for when you have an inside radius to chisel, or in combination with Scallop Set to create a wavy edge.

REPLACEMENT CARBIDES PART #

NARROW (Straight Shear Through)

REVERSE SCALLOP

WAVY (scallop with the reverse scallop in two passes)

SCALLOP

DESCRIPTION

OME-457-582 1 each 1.5" Carbide for Narrow Tooth OME-420-617 1 each 3" Carbide for Laminated Stone and Soft Stone Tooth OME-530-873 1 each Left Side Carbide for Scallop Tooth OME-612-894 1 each Right Side Carbide for Scallop Tooth OME-169-818 1 each Reverse Scallop Carbide for Reverse Tooth

PRICE $ 14.50 30.00 40.00 40.00 58.00

Rockbiter Ultimate Stone Chiseling Tool PART # The Rockbiter makes it possible for ANY dimensional stone fabricator to create that beautiful split face chiseled edge FAST, EASY, and SAFE without hard impacts. This affordable tool will increase proﬁt and productivity.

ROC-ROCKBITER1 ROC-ROCKBITER2 ROC-TEETH ROC-BOLTKIT

DESCRIPTION 2cm to 4cm on all stones 6cm on all stones 1 Pair of Replac. Teeth for Rockbiter 1 & 2 Replacement Bolt Kit

PRICE $ 799.00 959.00 129.00 49.00

NSI SOLUTIONS SYSTEMS Seam Phantom

Produce nearly invisible seam edges, fast! PART # The Seam Phantom is an innovative system for producing nearly perfect seams in all types of stone and quartz. The system utilizes a diamond cup wheel followed by up to 3 diamond abrasive and a precise depth adjustment to eliminate chips and produce a clean sharp edge. When the counter is assembled the result is a nearly invisible seam. • Rigid design holds grinder at precise angle • Use with a Glide Guide straight edge • Produce precisely dressed, chip-free edges • Used to correct out of square or rough saw cuts on the jobsite

NSI-SP-E2 NSI-SP-A2 NSI-ETOAKIT NSI-SL3-ADAPT NSI-SL3-CUP2 NSI-SL3-60 NSI-SL3-150 NSI-SL3-300 NSI-48GG NSI-72GG NSI-92GG

Sink Bull

DESCRIPTION

PRICE $

Electric Seam Phantom Tool Pkg. (no grinder) 1,495.00 Air Seam Phantom Tool Pkg. (no polisher) 1,395.00 Electric To Air Kit (Adapter & Extension) 101.00 5/8"-11 Female Adaptor To Phantom Connection 49.95 2" Cup Wheel SL3-CUP2 75.75 3" Turbo Pad 60 Grit SL3-60 37.95 3" Turbo Pad 150 Grit SL3-150 37.95 3" Turbo Pad 300 Grit SL3-300 37.95 48" Glide Guide 120.72 72" Glide Guide 192.84 96" Glide Guide 249.28

Rapid Z-Cut

The Sink Bull is a machine speciﬁcally designed to quickly grind perfect, repeatable, cutouts for under-mount sinks. The Sink Bull rides on a simple, shop made template of plywood or plastic. Extremely stable in use, it grinds quickly and accurately when paired with our 3" Rapid Z-Cut bit. • Powered by heavy duty, 15 amp Makita Grinder (model Ga7021), sold separately • Start with 3" Rapid Z-Cut bit for fast material removal (top bearing version) • Finish with vacuum brazed drum wheel (top bearing required) to leave an easy to polish edge • Simple external water feed PART # NSI-SB-Z NSI-SB NSI-Z-CUT-B NSI-BL3 MAK-GA7021 SIS-2SRW036 SIS-2SRW060 SIS-2SRW120

122

Waterfeed Vacuum Brazed Drum

DESCRIPTION

PRICE $

Sink Bull with GFCI & Rapid Z-Cut with Top Bearing (no grinder) Sink Bull with GFCI (no Rapid Z-Cut or grinder) Rapid Z-Cut W/ Bearing NSI Rapid Z-Cut Replacement Blade Makita GA7021 Single Speed Grinder, 15 Amp* 2”X2” Vacuum Brazed Drum Wheel 36 Grit 2”X2” Vacuum Brazed Drum Wheel 60 Grit 2”X2” Vacuum Brazed Drum Wheel 120 Grit

1,650.00 1,375.00 320.00 6.75 204.95 104.00 104.00 104.00

Designed for shaping sink cutouts but is also great for other fabrication tasks. The combination of a corrosion resistant stainless steel arbor with center water feed and stacked 3" diamond blades allows for extremely fast stock removal, especially when used on The Sink Bull. • Blades can be rearranged to correct “apple coring” • 2-Stage template follower - the outer ring can be removed after the blades wear down (bearing version only) • 5/8" - 11 thread PART # NSI-Z-CUT-B NSI-Z-CUT NSI-BL3

DESCRIPTION

PRICE $

Rapid Z-Cut w/ Top Bearing 320.00 Rapid Z-Cut, No Top Bearing 245.00 (no polisher) (1) 3" Diamond Replacement Blade 6.75

BLUE RIPPER MITER MASTER SAW Omega Diamond Blue Ripper Miter Master Rail Saw It creates a PERFECTLY MITERED EDGE by cutting both 45 degree angles simultaneously. This is the saw you want if you are mitering slabs or prefabs. Included Makita 9564CV variable speed motor. Saw accepts up to 6" diameter blades. Can cut up to 3 cm stone. Includes two Makita grinders, two 5 or 6 inch blades chosen at time of order, 10 ft. quick-disconnect water line and GFCI protection

PART #

DESCRIPTION

PRICE $

OME-601-684

Blue Ripper Miter Master

1,450.00

T-31 ANCHOR MACHINE Omni Cubed

Pro-Anchor (T31 Machine)

123

DEHYDRATOR Dehydrator

• Abaco Machines Dehydrator (Sludge filter) is a filtration system for the fast collection and trapping of the abrasive mud produced by machining and finishing marble, granite, and other stones. • Abaco Machines Dehydrator (Sludge filter) is an economical one step method in separating sludge and slurries. Dehydrator is constructed of Stainless Steel and consists of four basic components: pump, mud holding tank, clean water tray and filter bags. Abaco Machines Dehydrator (Sludge filter) has no moving parts and requires minimal maintenance.

Dimensions Weight Power USA / International Weekly Output Capacity of Dry Mud Mud Holding Tank Capacity Sump Pump Float Switch Bag Dimension Construction Material Flange for Bag Fasteners Valves

95-13/16" x 27-9/16" x 91-3/4 617 230v 60Hz / 240v 50Hz 22 cu. Feet 550 liters 6E-CIA-SFS 189 Ipm / or equal Mechanical Float Switch 350 dia. x 1200 Stailess Steel 350 dia. Aluminium Stainless Steel 2 Inch BSP Brass Nickel Plated

Includes the following: • 4 Plastic Curtains • 2 Stainless Steel Curtain Rods • 1x5 m Industry Water Hose • 3 Industry Hose Clamps • 15 Polypropylene Filtration Bags • 1 Pit Cleaning Tool/ Air Stick

124

PART #

DESCRIPTION

PRICE $

ABA-ADE089 ABA-ADE89-002 ABA-ADE89-008

Dehydrator-Stainless Steel Dehydrator Bags Little Giant Pump (for Dehydrator)

7,999.00 4.95 895.00

ADHESIVES K-Bond ELITE Translucent Adhesive Premium quality acrylic and epoxy blended adhesive. It has been designed with the stone fabricator and installer in mind. K-Bond Elite has been engineered to have the best possible ratio of working time to curing speed possible with increased bonding strength compared to standard polyester adhesives. Its lack of color makes it easy to use for most applications. • Ultra transparent clear formulation • Stronger than standard polyester stone adhesive systems • Chemical resistant • Fastest cure at room temperature • 5-7 minutes of working time • Tack-free in 10-20 minutes • Can be used on all interior applications and most exterior applications • Machinable in 20-30 minutes • Clear formulation with better UV stability • Gel won’t sag on vertical surfaces

SIZE

PART #

DESCRIPTION

PRICE $

1 Qt KB-EPOX-70645 Transparent Knife 23.00 1.25 Gal KB-EPOX-70648 Transparent Knife 79.00 5 Gal KB-EPOX-70647 Transparent Knife 309.00

SIZE

PART #

DESCRIPTION

PRICE $

1 Qt KB-EPOX-70640 Transparent Flowing 23.00 1.25 Gal KB-EPOX-70643 Transparent Flowing 79.00 5 Gal KB-EPOX-70642 Transparent Flowing 309.00

Akemi Platinum Premium Epoxyacrylate Translucent Adhesive Akemi Platinum Epoxy Acrylate Adhesive is a special epoxyacrylate blended adhesive formulated to combine the speed of polyesters, clarity of acrylics, and strength of epoxies. It is lighter in color than standard polyesters and up to 50 percent stronger. It is also UV resistant, and it cures in under 20 minutes. It can be pigmented to match very light colors where standard polyesters are yellow, when you add the hardener. It works great for applications such as patching, seams, and laminating. They can be done quickly, and the tinting job is a breeze. In addition to speed and strength, the adhesive has excellent polishing characteristics and offers very good adhesion on natural stones at higher temperatures. SIZE

PART #

DESCRIPTION

PRICE $

1 Qt 1 Qt 1 Gal

AKE-POLY-10726 AKE-POLY-10725 AKE-POLY-10744

Transparent Flowing Transparent Knife Transparent Knife

35.00 35.00 169.00

K-Bond PolyEpoxy Hybrid Translucent Adhesive A high quality blend of Polyester and Epoxy that gives the strength of an epoxy with the speed and ease of a polyester adhesive. PolyEpoxy is very light in color and is great for lamination, seams, and joints. • 4-6 minutes of working time • Tack -free in 10-20 minutes • Polishable in 20-30 minutes • Very light formula with better UV stability

SIZE

PART #

DESCRIPTION

PRICE $

SIZE

1 Qt KB-EPOX-70635 Transparent Knife 23.00 1.25 Gal KB-EPOX-70638 Transparent Knife 71.00 5 Gal KB-EPOX-70637 Transparent Knife 299.00

1 Qt 1 Gal 5 Gal

PART #

DESCRIPTION

PRICE $

KB-EPOX-70630 Transparent Flowing 23.00 KB-EPOX-70631 Transparent Flowing 71.00 KB-EPOX-70632 Transparent Flowing 299.00

125

ADHESIVES K-BOND High Performance Polyester

SIZE

PART #

DESCRIPTION

PRICE $

1 Qt 1.25 Gal 5 Gal

KB-POLY-70001 KB-POLY-70006 KB-POLY-70003

Transparent Flowing Transparent Flowing Transparent Flowing

14.95 55.00 189.00

1 Qt 1.25 Gal 5 Gal

KB-POLY-70007 KB-POLY-70010 KB-POLY-70009

Transparent Knife Transparent Knife Transparent Knife

14.95 55.00 189.00

STONE PLUS Premium Polyester

1 Qt 1.25 Gal 5 Gal

SIS-SP-TFQT SIS-SP-TFSS SIS-SP-TF5G

13.00 49.50 175.00

1 Qt 1.25 Gal 5 Gal

SIS-SP-TKQT SIS-SP-TKSS SIS-SP-TK5G

13.00 49.50 175.00

MAKO

Quality Polyester at an attainable price

126

1 Qt 1.25 Gal 5 Gal

SIS-MAKO-TFQT SIS-MAKO-TFSS SIS-MAKO-TF5G

12.50 45.00 139.00

1 Qt 1.25 Gal 5 Gal

SIS-MAKO-TKQT SIS-MAKO-TKSS SIS-MAKO-TK5G

12.50 45.00 139.00

ADHESIVES Mastice 2000 Made with polyester resin in two parts, adhesive and catalyst. Ideal for bonding and ﬁlling marble, granite, travertine and natural stones. In the latest formula the use of solvent has been reduced. A special resin has been introduced to increase the adhesive power, making application and polishing easier. MASTICE 2000 is available both in liquid and solid form for vertical use. Available in different colors. SIZE

PART #

DESCRIPTION

PRICE $

1 Qt 1 Qt 1 Qt 5 Gal 5 Gal

BEL-000006 BEL-000003 BEL-000007 BEL-000009 BEL-000010

Transparent Flowing Transparent Knife Buff Knife Transparent Flowing Transparent Knife

15.75 17.25 17.75 169.00 179.00

Marble Filler 1000 Transparent

SIZE

PART #

1 Qt

AKE-POLY-10701

Marble Filler Super

PRICE $

SIZE

PART #

23.95

1 Qt

AKE-ACRL-10714

Marble Filler 1000 Flowing Transparent Waterclear

PRICE $ 46.95

Marble Filler 1000 Knife Waterclear Transparent L-Special • A gel-like ﬁller which hardly yellows, does not change its consistency by stirring, keeps its stability even in case of higher temperatures • For bonding and ﬁlling light-colored and white, transparent-crystalline natural stone such as Thassos, Carrara, Onyx, Palisandro and Estremoz in a vertical position. Also for modeling corners and edges.

SIZE

PART #

1 Qt

AKE-POLY-10720

Stone Plus Penetrating

PRICE $

SIZE

PART #

DESCRIPTION

PRICE $

28.95

1 Qt

AKE-POLY-10722

Colour Milky

28.95

Acrylic Ultra Penetrating A great product that can be used to fill cracks and fissures in natural stone. It can also be applied to the back side of stone when applying mesh for strengthening the stone and to hold it in place. When working with really fragile stone that has a tendency to flake off, this adhesive will stop the flakes from loosening. It is also a good idea to apply it to fragile stone edges before polishing.

1 Qt

KB-POLY-70042

36.75

127

ADHESIVES, COLOR PIGMENTS, HARDENER Mastice Astra 24K

Paste Hardener

Two-component, super transparent mastic for the gluing and ﬁlling of marble and stone. Its good adhesive power and unbeatable transparency make ASTRA 24K a necessary product for marble and light colored stones, and everytime transparency is a particular necessity. Typical example is the ﬁlling of travertino, whenever the characteristic holes need to be seen.

Professional use hardening paste for adhesives. • Quick hardening • Non-separating

SIZE

PART #

PRICE $

1 Qt

BEL-000261

34.50

K-Bond Color Pigments

KB-COLR-70201

Quick Set Stone Epoxy 1:1 1:1 clear ﬂowing and knife grade epoxy systems. • Cure time under 2 hours • Working time 10-15 minutes • Great for lamination on vertical applications • Can be polished to high gloss and used on damp stone • Holds up through intense machining • Exterior and interior use

128

SIZE

PART #

DESCRIPTION

PRICE $

2 Qt 2 Gal 2 Qt 2 Gal

KB-EPOX-70615 KB-EPOX-70616 KB-EPOX-70618 KB-EPOX-70619

Flowing - 1 Part A and 1 Part B Flowing - 1 Part A and 1 Part B Knife - 1 Part A and 1 Part B Knife - 1 Part A and 1 Part B

44.00 163.00 46.00 165.00

ADHESIVES Chemorset A&B

Epox 2000 A&B

Two pack epoxy mastic, suitable to glue, joint, fill and reinforce various types of granite marble and stones. Product with a higher adhesive power, its performance makes it useful to fill or rectify also big imperfections on works that otherwise would be considered waste. Weather-proof and with a very high resistance to solvent, alkali and acid, is the best filler-paste for marbles and granites.

2.20 Lbs 1.10 Lbs

BEL-000019 BEL-000020

Knife Part A Knife Part B

31.95 21.75

Epox 5000 Premium A&B Two-component epoxy resin with high transparency and very low yellowing for gluing, jointing and filling of various types of granites, marbles and stones, also very hard or crystalline ones, where the adhesion of polyester-based adhesives are sometimes insufficient. EPOX 5000 Premium is super transparent, has very high bonding strength and adheres well also to slightly wet stones, can fill even large flaws and correct objects of value which otherwise would be considered waste.

2.20 Lbs 1.10 Lbs

BEL-000031 BEL-000032

Part A Part B

37.50 43.95

Marble Filler 1000 Flowing Universal

Marble Filler 1000 Knife Transparent L-Special

SIZE

PART #

DESCRIPTION

PRICE $

1 Qt 1 Qt 1 Qt

AKE-POLY-10105 AKE-POLY-10108 AKE-POLY-10107

Color Buff Color White Color Black

24.95 24.95 24.95

SIZE

PART #

DESCRIPTION

PRICE $

1 Qt

AKE-POLY-10710

Color Honey Yellow

25.95

129

Color Match System A complete color matching system for the attainment of invisible bonding and connecting joints on granite, quartz, marble, solid surface, and all other dense countertop and surface material. Cartridges contain the pre-pigmented epoxyacrylate adhesive and the catalyst. The mix ratio of the cartridge is 10:1. The Colourbond system will dispense smoothly and will not sag. Areas of application Inside use for bonding quartz, granite, marble, porcelain, solid surface, quartzite and many other interior surfaces. Colourbond color charts can be found for these various surfaces at www.akemi.de Great for miter joints, laminations, doubling of stone edges, joints, seams, and the V-grooving process The creamy, slightly jelly-like consistency allows for the application of horizontal and vertical surfaces For extremely thin bonding joints Suitable for natural and man-made stones

Properties Very fast hardening (20 - 30 minutes at 68Â°F) Based on epoxy acrylate, therefore very fast cure and high strength bonding Smooth, soft consistency enables easy application of vertical or horizontal surfaces UV stabilizer Excellent polishing properties Cartridge system: Ready to use in the right color with exact mixing of hardener and resin every time. Cuts down waste and speeds up production

UNDER 20 MINUTES CURE TIME to a smooth glossy ďŹ nish

Competitive Advantages Unique selection of over 50 colors No unpleasant odor Non-drip formula so no strands of adhesive when working For perfect care of quartz use the AKEMI QUARTZ CARE products, recommended by leading brands such as Silestone and Eco. For perfect care of natural stone use the AKEMI STONE CARE products

MAGIC COLORS MAGIC

White Magic CC 1150 46111

White Magic CC 1160 46112

Creme Magic CC 1680 46121

Beige Magic CC 1780 46131

MAGIC

Grey Magic CC 1890 46141 CLASSIC

CLASSIC

Color Charts: Scann here

24.99 1.25 57.00

AKE-EPOX-(Color) AKE-MISC-10552 AKE-MISC-90500

Please Note: Color samples show the cured state of products. Difference of color and gloss reserved due to printing and production alterations.

MS-76 Rodding Bond • Gel-like paste 2-component adhesive (10:1) • It is particularly suitable for groove reinforcement in kitchen worktops in combination with flat iron braces as well as glass fibre and carbon fibre rods or tape. It can also be used for other bonding purposes, i.e. for joining natural stone or artificial stone together or natural and artificial stone to one another (mitre joints, built-up edging) and with wood, metal and various plastics. 2-component cartridges allow simple, secure and clean working. Can be exactly dosed and homogeneously mixed. Accessories are available: mixing nozzles, skeleton gun; manual as well as one conversion; kit each for metal gun manual and; pneumatic, as these guns are generally; preadjusted for 395 ml cartridges 1:1 and; 400 ml cartridges 2:1.

490 ml cartridge

AKE-POLY-10929

Color: light grey

27.95

10:1 for 250 ml and 490 ml cartridge 10:1 1

AKE-MISC-10552

Mixing nozzle

2.95

490 ml cartridge 10:1

AKE-MISC-10636

For Color Bond System

99.00

ADHESIVES, INSTANT GLUES Everclear 100 Flowing

SIZE

PART #

DESCRIPTION

PRICE $

2 lbs

AKE-PURE-11424

Colorless Transparent

86.95

Everclear 110 - Knife-Grade

SIZE

PART #

DESCRIPTION

PRICE $

3 lbs

AKE-PURE-11427

Colorless Transparent

129.95

AKEPOX® 2000

SIZE

PART #

3.3 lbs AKE-EPOX-10618

Cyanoacrylate Instant Glues

DESCRIPTION Color: Transparent Honey Yellow

PRICE $ 70.95

AKEPOX® 5000 PART #

SIZE 3.3 lbs

132

PART # AKE-EPOX-10681

DESCRIPTION

PRICE $

SAT-HS-4 SAT-HS-8 SAT-HST-4 SAT-HST-8 SAT-HST-4T SAT-HST-8T

2 Oz Clear Hot Stuff Glue-Thin (R) 8 Oz Clear Hot Stuff Glue-Thin (R) 2 Oz Clear Super T Glue-Medium (Y) 8 Oz Clear Super T Glue-Medium (Y) 2 Oz Clear Special T Glue-Thick (G) 8 Oz Clear Super T Glue-Thick (G)

10.50 19.95 10.50 19.95 11.50 19.95

SAT-NCFS-6 SAT-QA-6

6 Oz NCF Stone Accelerator-aerosol 6 Oz NCF Quick Accelerator-aerosol

16.50 12.95

PRICE $

SAT-NCF-18 SAT-US1

18 Oz NCF Hot Accelerator Reﬁll 2 Oz Super Solvent

43.95 7.25

Color: 105.00 Transparent Crystal Clear

SAT-HT-600 SAT-PT-100

2 Ea Hot Tips Lg No Clog Spouts And Cap 12 Ea Pro Tips Extension Applicators

1.95 1.95

DESCRIPTION

ADHESIVES AKEPOX® 2010

• Gel-like, 2-component construction adhesive (2:1), free of solvents, weather-resistant • For ﬁne bonding joints and for the bonding of natural and artiﬁcial stone in a vertical position. Easy to color. Good adhesion on humid stone Gel-Mix-cartridges allow simple, secure and clean working. Can be exactly and homogeneously mixed. SIZE

PART #

DESCRIPTION

PRICE $

0.9 lbs

AKE-EPOX-10616

30.95

5 lbs

AKE-EPOX-10623

Color Transparent Honey Yellow Color Transparent Honey Yellow

1.7 Oz

AKE-EPOX-10627

Gel Mix

16.95

96.95

AKEPOX® 5010

AKEPOX® 3000

• Gel-like 2-component construction adhesive (2:1), only slight tendency to discolor and yellow, ideal for coloring, weather-resistant, free of solvents, foodsafe (certiﬁed by an external German testing institute) • For face joints indoors and outdoors particularly where they are visible. For quadratures and for restoration work in contact with mortar, ideal for white natural and artiﬁcial stone

• Fast hardening, 2-component fixing adhesive (1:1), gel-like, in cartridges • Fixing adhesive for low loads. Used for fixing metal letters. Ideal for fixing natural and artificial stone into position 2C-cartridges allow simple, secure and clean working. Can be exactly dosed and homogeneously mixed.

Gel-Mix- and Single-Mix-cartridges allow simple, secure and clean working. Can be exactly dosed and homogeneously mixed. Single-Mix-cartidges can be used for all best-selling 1-component guns. SIZE

PART #

DESCRIPTION

PRICE $

SIZE

PART #

DESCRIPTION

5 lbs

AKE-EPOX-10685

Color Transparent-Milky White

124.95

1.7 Oz

AKE-EPOX-10638

Mini Quick Color Transparent

19.95

1.7 Oz

AKE-EPOX-10684

Gel Mix

20.95

1.7 Oz

AKE-EPOX-10561

19.95

6 Oz

AKE-EPOX-10568

Single Mix

30.95

Mini Quick Color Black

AKEPOX® 2040

AKEPOX® 2030

• Paste-like, 2-component construction adhesive (2:1), weather-resistant, free of solvents • For bondings to vertical surfaces in construction work and for levelling off the surfaces of natural and artiﬁcial stone which are particularly uneven. For glueing tiles. Ideal for modelling. Very good adhesion on humid stone, aluminium and other metals

• Creamy, 2-component construction adhesive (2:1), after approx. 8 - 10 h (20°C) product is workable and prepared for heavy duty, weather resistant, free of solvents • For bondings in vertical positions in construction work. Very good adhesion on damp stone, aluminium and other metals as well as on natural and artiﬁcial stone

SIZE

PART #

DESCRIPTION

1.65 lbs 8.25 lbs

AKE-EPOX-10611 AKE-EPOX-10606

Color: Light-Grey Color: Light-Grey

PRICE $

PRICE $ 33.95 96.95

SIZE

PART #

DESCRIPTION

PRICE $

6.6 lbs

AKE-EPOX-10601

Color Grey-Green

100.95

133

CAULKS AND SEALANTS Alex Plus

Premium Indoor/Outdoor Sealant

XtraBond®50

Siliconized Acrylic Sealant XtraBond®50 is a premium grade multi-purpose siliconized acrylic latex sealant. The product is engineered to provide excellent adhesion to vinyl, aluminum, wood, sheet metal & most common building materials without need of a primer. The addition of a silicone polymer provides greater ﬂexibility than other latex products. XtraBond®50 is ideal for use in the installation of windows & doors – as well as interior sealing of cultured marble and tile. Installers prefer it, because the product cures rapidly to form a durable tight bond. • Window & Door Approved • Cleans Up with Water • Excellent Flexibility • Mildew Resistant • Quick Curing • Paintable

10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz

Clear

PBS-50000 PBS-50001 PBS-50003 PBS-50147 PBS-50201 PBS-50203 PBS-50411 PBS-50433 PBS-50598

White

Black

Clear White Black Antique White Dark Bronze Brown Cedar Tan Almond Slate Gray

Black Dark

Slate Gray

2.99 2.35 2.99 2.99 2.99 2.99 2.99 2.99 2.99

Cedar Tan

Bronze Almond Antique White Brown

Alex Painters Caulk

XtraBond®25

All purpose acrylic latex painter’s caulk. Applies smoothly and easily. Adheres to wood, paster, drywall and masonry. Resists cracking and chalking. Interior/exterior use. Paintable. Water clean-up. 25 year durability guarantee. Meets ASTM Speciﬁcation C 834 for extrudability, artiﬁcial weathering, extension-recovery and slump.

XtraBond®25 is a Premium Grade Multi-Purpose Acrylic Latex Caulk that is engineered to deliver excellent adhesion and durability in a wide variety of interior construction applications. The product has been specially developed for the installation of windows and doors – as well as for general maintenance applications.

Acrylic Latex Caulk

XtraBond®25 is a favorite of professional painters, who need a durable latex adhesive that they can count on to deliver consistent performance in interior jobs. • Environmentally Friendly • Easy Gunning & Tooling • Cleans Up with Water • Paintable

10.1 Oz

134

PBS-25001F

White

1.80

CAULKS AND SEALANTS Dynaﬂex 230

Premium Indoor/Outdoor Sealant

XtraBond®250

100% RTV Silicone Sealant XtraBond®250 is a 100% acetoxy-based, high performance silicone engineered for applications that require a 100% silicone solution. The product is formulated as a one component, mildew resistant sealant that is permanently ﬂexible and offers excellent adhesion. XtraBond®250 anti-microbial formula is NSF approved and FDA compliant, so it can be used conﬁdently around food applications. Its resistance to moisture makes it ideal for use in high moisture areas such as marine, baths, and walk-in coolers. • Consistent Gunablility & Tooling • Approved for Cultured Marble • Anti-Microbial Formula • FDA/USDA Compliant • Excellent Adhesion • Non-Paintable

10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz

100% Silicone

Window & Door 100% Silicone Rubber Sealant

PBS-2501 PBS-2502 PBS-2504 PBS-2503

White Clear Black Aluminum

3.55 3.55 3.55 3.55

XtraBond®150

RTV Silicone Sealant XtraBond®150 is a one component, permanently ﬂexible, RTV (Room Temperature Vulcanizing) mildew-resistant silicone sealant that is the industry standard. The product’s tough chemical resistance makes it a worry-free solution for a wide range of applications. XtraBond®150 provides excellent adhesion to cultured marble, tile, glass, vinyl, aluminum, and sheet metal without the need for a primer. The product is engineered to cure rapidly when exposed to atmospheric moisture, to form a durable tight bond that contractors and installers count on. A wide range of packaging options provides users with total ﬂexibility in how the product is applied.

Beats The Nail

• Approved for Cultured Marble • Excellent Adhesion to Glass • Window & Door Approved • Easy to Gun, Easy to Tool • Non-Sag & Slump • Non-Paintable

All-Purpose Construction Adhesive 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz 10.1 Oz

PBS-15000 PBS-15001 PBS-15003 PBS-15433 PBS-15806 PBS-15555 PBS-15028 PBS-15012 PBS-15004

Clear White Black Almond Aluminum Translucent White Translucent Gray Translucent Charcoal Translucent Beige

3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25

135

IMPREGNATORS AND SEALERS 511 Impregnator & 511 Porous Plus

8 Oz 1 Pint 1 Qt 1 Gal 5 Gal

MIR-5118OZ MIR-511PT MIR-511QT MIR-511GAL MIR-511PAIL

511 Impregnator 511 Impregnator 511 Impregnator 511 Impregnator 511 Impregnator

8.50 14.00 24.00 84.00 412.00

8 Oz 1 Pint 1 Qt 1 Gal 5 Gal

MIR-PLUS8OZ MIR-PLUSPT MIR-PLUSQT MIR-PLUSGAL MIR-PLUSPAIL

511 Porous Plus 511 Porous Plus 511 Porous Plus 511 Porous Plus 511 Porous Plus

16.95 30.95 52.00 168.00 824.00

STONETECH® Impregnator Pro® Sealer

STONETECH® Heavy Duty Exterior Sealer • Heavy duty protection against tough, outdoor water-based stains. • Natural look • Solvent-based, exterior use • Minimizes efﬂorescence

Heavy duty protection against tough oil and water-based stains. • Original ﬂuorochemical technology • Natural look • Solvent-based, interior & exterior

2.00 24.50 73.00 309.00

511 H20 Plus

2.00 27.75 43.50 130.00 552.00

STONETECH® BulletProof® Sealer Maximum protection against the toughest oil and water-based stains. New, advanced formula bonds with stone for improved wear resistance. • Advanced penetrating microbond protection • Makes cleaning stone easier • Preserves natural look • Water-based low-solids coating • Interior & exterior

1 Qt 1 Gal 5 Gal

136

MIR-H20PLQT MIR-H20PLGAL MIR-H20PLPAIL

33.00 94.50 464.00

55 Gal

ST-D14901553

2.00 35.00 54.00 162.00 685.00 7,169.00

Protect the beauty of your natural stone project for years to come with the STONETECH® Countertop Warranty Kit. DESCRIPTION ST-D15018335

BulletProof® Qt + Revitalizer® Citrus 24oz Spray

186.00

ST-D15097309

BulletProof® 55 Gal + Revitalizer® Citrus 24oz Spray

35,145.00

Options available for existing residential granite countertops. Call for details and pricing.

IMPREGNATORS AND SEALERS STONETECH® Sealer

STONETECH® Heavy Duty Sealer

2.00 23.50 36.50 109.00 462.00

2.00 23.50 69.50

511 Seal & Enhance

8 Oz Pint 1 Qt 1 Gal 5 Gal

TSI 100

MIR-SE/EN8OZ MIR-SE/ENPT MIR-SE/ENQT MIR-SE/ENGAL MIR-SE/ENPAIL

Impregnator for Natural Stone

138

511 Anti-Slip Formula

16.95 29.50 44.50 161.50 789.00

1 Pint 1 Qt

MIR-ANTISLIPPT MIR-ANTISLIPQT

TSI 200 Premium

Impregnator for Natural Stone

4.95 9.25

IMPREGNATORS AND SEALERS Stone Impregnation

Idea HP

Penetrates deep into the stone, makes it waterrepellent without impairing the vapor permeability. Protects façades from driving rain, causes water to pearl off and is dirtrepellent.

Clear protective agent studied to protect stones against water, oil, grease and humidity. IDEA HP penetrates deep into the stone, blocks the efﬂorescence and let the stone breaths and does not change the natural color of the stone; does not create unsightly plastic ﬁlm.Laboratory test shows IDEA HP resists well to UV rays and the color does not change even after prolonged time. It is perfectly clear and leave unaltered the original stone color. Most suitable for façade, table, kitchen, vanity tops etc. It prevents mildew formation.

SIZE

PART #

DESCRIPTION PRICE $

8.5 Oz AKE-CARE-10845 1 Qt AKE-CARE-10834 1.3 Gal AKE-CARE-10835

Bottle Bottle Canister

12.95 23.95 91.95

SIZE

PART #

PRICE $

1 Lt

BEL-000016

21.50

Stain Repellent Nano-Effect

Stain Repellent W

Strongly repels water, grease and oil. Used to protect ﬂooring, table tops and working surfaces made of absorbent natural and artiﬁcial stone. Prevents the stone from staining spots or makes removing of spots much easier, the stone remains capable of breathing. The protective effect already begins after some minutes and is fully effective after 2-3 hours. Special substances work against a laminar wetting through liquid drops. Ball-shaped liquid pearls which lie only selectively on top of the stone surface, run off the surface.

It repels water, grease and oil. Used to protect ﬂooring, table tops and working surfaces made of absorbent natural and artiﬁcial stone. Prevents the stone from staining spots or makes removing of spots much easier, the stone remains capable of breathing. The product is free of solvents and has only a faint odor, therefore it is ideal for use in occupied rooms. Excellently suitable for application on humid surfaces.

SIZE

PART #

DESCRIPTION

PRICE $

8.5 Oz 1Qt 1.3 Gal

AKE-CARE-11931 AKE-CARE-11932 AKE-CARE-11933

Bottle Bottle Canister

28.95 58.95 233.95

511 Porcelain & Ceramic Tile Sealer

Impregnating sealer designed for the protection of all porcelain and ceramic tile surfaces. It forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Porcelain & Ceramic Tile Sealer is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery. COVERAGE: Up to 250 sq ft per 16 oz. Interior & Exterior Use - Weather Resistant Safe for Food Areas - Superior Coverage Easy-to-Use - U.V. Transparent - Will Not Yellow Oil & Water Resistant - Grout Release

PART #

16 Oz

MIR-PCTS16OZ

DESCRIPTION PRICE $ Spray

PART #

1Qt 1.3 Gal

AKE-CARE-10857 AKE-CARE-10858

DESCRIPTION PRICE $ Bottle Canister

41.95 187.95

Idea Gold

Water, stain & slip protection for: Porcelain Tile; Ceramic Tile; Grout; Quarry Tile; Glazed Tile.

SIZE

14.00

Exceptional anti-stain product based on nanotechnology formulation, it protects marble and granite stones from a wide range of stains. Transparent protector used for maximum protection of all stone surfaces against water penetration, oil, fats and moisture. IDEA GOLD works great even on shiny materials, allows the stone to breathe, blocks efﬂorescence, penetrates deep, does not alter the natural color of treated surface and does not create any ﬁlm. Spectacular “pearl effect”: water droplets on treated surface take shape of spheres, which glide away on sloping surfaces or immediately after an airblow. Laboratory tests demonstrate the UV resistance of product, which has no color change even after prolonged exposure. It is perfectly invisible and leaves unchanged the original color of material. It prevents formation of mold. SIZE

PART #

1 LT

BEL-000013

DESCRIPTION PRICE $ Bottle

61.50

139

IMPREGNATORS AND SEALERS 511 Quartz Counter Top Sealer

511 Glass Tile & Shower Sealer

Water, stain & slip protection for: Quartz, Grout, Quarry Tile, Ceramic Tile, Glazed Tile, Porcelain Tile, Polished Granite, Terrazzo, Polished Marble, Stucco, Slate, Travertine.

Prevents stains, water spots and excessive cleaning of glass surfaces: Creates a barrier between glass & water; glass is easier to clean; prevents calcium buildup; makes calcium removal easier; glass stays cleaner longer; interior & exterior use; UV Transparent.

A impregnating sealer designed for the protection of all quartz and medium to dense porous surfaces. It forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. It’s not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery. COVERAGE: Up to 250 sq ft per 16 oz.

Speciﬁcally designed to protect glass tile and showers from staining, buildup and water spots. This easy to use formula is safe and effective indoors and out and is applied with a simple spray-on wipe off application. It will keep your glass surfaces clean longer and reduce cleaning times by as much as 80%. COVERAGE: Up to 180 sq ft per 16 oz.

Interior & Exterior Use - Weather Resistant Safe for Food Areas - Superior Coverage Easy-to-Use - U.V. Transparent - Will Not Yellow Oil & Water Resistant - Grout Release SIZE

PART #

16 Oz

MIR-QCTS16OZ

Will not Change the Clarity of Glass Will not Streak or Smear - Add Long Lasting Protection Increases Coefﬁcient of Friction - Won’t Etch Glass

DESCRIPTION PRICE $ Spray

14.00

STONETECH® Natural Stone Countertop Sealer

SIZE

PART #

16 Oz

MIR-GTSS16OZ

DESCRIPTION PRICE $ Spray

14.00

STONETECH® Salt Water Resistant Sealer

Maximum protection against the toughest oil and water-based stains. New, advanced formula bonds with stone for improved wear-resistance. Great for back-splashes and shower walls.

2.00 157.00 666.00

30.75

Grout Sealer

STONETECH® Advanced Grout Sealer

Grout Sealer is a sealer designed for the protection of all sanded and non-sanded grout joints. Grout Sealer forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. Grout Sealer is not a surface coating and will not alter the natural look. Grout Sealer comes with a unique Applicator Tip for easy application.

140

SIZE

DESCRIPTION

PART #

60 Oz

Bottle with Applicator

MIR-GRTSLR6OZ

Maximum protection formula resists oil- and water-based stains to keep grout looking new

PRICE $ 4.50

18.25

IMPREGNATORS AND SEALERS 90

STONETECH® Heavy Duty Grout Sealer

511 Aerosol Spray on Grout Sealer

Heavy duty protection against tough oil and water-based stains on ceramic tile and grout. • Heavy duty protection against most stains • Protects grout & makes cleaning easier • Natural look • Interior & exterior • Water-based, low-solids coating -r

PRICE $ 2.00 11.50 16.00 18.00 52.50

PRICE $

Tile, Stone & Grout Sealer

STONETECH® Grout Release Protection against grout sticking to absorbent surfaces during installation. • Makes grout clean-up during installation easy • Prevents grout from staining stone • Water-based coating • Interior & exterior

-r

1 Pint 1 Qt 1 Gal

MIR-TSSPT MIR-TSSQT MIR-TSSGAL

STONETECH® Stain Protecting Grout Additive

PRICE $

3.30 5.60 19.00

29.95

Grout Shield

Grout Additive for Ultimate Stain Protection • Protects Sanded or Non-Sanded Grout Staining • Mixes with Sanded or Non-Sanded Grout in Place Water • Adds Compressive and Tensile Strength • Lifetime Warranty

Water-based, professional grade additive enables you to grout and seal in one easy step, protecting grout against stains without affecting grout color.

Specialty sealer additive, made to replace water in mixtures with sanded or nonsanded grout. By taking inconsistent tap water out of the equation, it is able to create a consistent and more durable product with superior color quality. PRICE $

PRICE $

20.50 40.95

141

ENHANCERS STONETECH® High Gloss Finishing Sealer

STONETECH® Semi Gloss Finishing Sealer

PRICE $

2.00 21.50 58.75

2.00 21.50 64.50

STONETECH® Enhancer Sealer

STONETECH® Enhancer Pro Sealer Heavy duty protection against tough oil and water-based stains. Enriches the color of natural stone. • Enriches color • Heavy duty protection against most stains • Solvent-based, interior & exterior applications PRICE $

PRICE $

2.00 45.00 64.00 205.00 869.00

2.00 32.75 98.00 415.00

Mira Matte

Marble Conditioner

nce -r

PRICE $ PRICE $

142

1 Qt 1 Gal

MIR-CONDQT MIR- CONDGAL

10.50 26.70

ENHANCERS DARKENER PLUS INKS Coloring Concentrate for Edges of Dyed Stones Darkener Plus Ink is used with the Darkener Plus to dye and change the color of natural stone. Inks should be mixed with Darkener Plus in a ratio of 5% – 30%. Great when used for dying the edges of dyed stones. Can be removed with Akemi Impregnation Remover (page 139).

SIZE

DESCRIPTION

PART #

1.7 Oz 1.7 Oz 1.7 Oz 1.7 Oz 1.7 Oz 1.7 Oz

Red Black Brown Gold Blue Green

AKE-CARE-11490 AKE-CARE-11491 AKE-CARE-11492 AKE-CARE-11493 AKE-CARE-11494 AKE-CARE-11495

PRICE $ 16.95 16.95 16.95 16.95 16.95 16.95

DARKENER PLUS

Color Intensiﬁer

Color for epoxy resin

SIZE

DESCRIPTION

PART #

PRICE $

1 Qt 1.3 Gal

Bottle Canister

AKE-CARE-10991 AKE-CARE-10992

73.95 290.95

SIZE DESCRIPTION 1 Qt 1.3 Gal

Bottle Canister

PART #

PRICE $

AKE-CARE.10887 AKE-CARE.10888

44.95 174.95

Rapid Color

Idea Dark

Product used to brighten, antiquing and waterprooﬁng very absorbent materials, such as Limestone, Sand Stone, Stone of Lecce and Vicenza stone. IDEA RAPID COLOR gives the material a strong wet and shiny satin. It also acts as a protection against stains caused by oil, grease and moisture.

Protective impregnating agent, for the treatment of both shiny or rough surfaces of natural stones such as granites, marbles, etc. Speciﬁc for dark or black absorbing stones, IDEA DARK enhances deeply the natural color of stone, covers scratches and ﬂaws of dark/black stone.

SIZE DESCRIPTION SIZE DESCRIPTION 1 Lt

Bottle

PART # BEL-000014

PRICE $ 37.75

1 Lt 5 Lt

Bottle Canister

PART #

PRICE $

BEL-000011 BEL-000012

59.50 275.00

143

ENHANCERS Darkener Super Food Safe Certiﬁed

Weather-resistant product with a long-term effect for indoors and outdoors. Especially suited for color enhancement of dark and black stone (such as Nero Assoluto, Impala black and Galaxy). Weather-resistant product with a long-term effect for indoors and outdoors. Damaged areas (e.g. hairline cracks) can be treated. The surface thus obtains a homogeneous appearance. Especially suited for ﬁne ground and polished stones. Coverage: approx. 10-20 m2/liter; depending on the absorbency and composition of the stone surface.

SIZE

DESCRIPTION

PART #

PRICE $

8.5 Oz 1 Qt 1.3 Gal

Bottle Bottle Canister

AKE-CARE-10939 AKE-CARE-10940 AKE-CARE-10941

28.95 58.95 213.95

TRANSFORMER Color Enhancer The fastest color intensifier and revitalizing product on the market. Penetrate and transform dull, lackluster and faded stone in just 10 minutes. With higher spreading rate than other color intensifiers: 30-50 m²/l on polished surfaces, Akemi Transformer is especially suited to adjust and enhance the edge color of resin treated stones. Use on all natural stones, polished, honed, flamed or brushed stone surfaces and quartz-based surfaces. Provides stain protection, higher, strong and durable color deepening effect is weather-resistant. Use the Transformer Exotic Formula for highly resonated stones. SIZE

PART #

DESCRIPTION

PRICE $

1 Qt 1 Qt

AKE-CARE-12050 AKE-CARE-12057

Transformer Transformer Exotic

70.00 98.00

Idea Stonager

Idea Tropical

Hydro and oil repellent protective, impregnating, wet effect for raw and dressed materials. Internal and external use. It protects against the penetration of water, oils, grease and humidity.

Protective, impregnating , wet effect for raw, dressed and especially for exotic materials. Internal and external use. It protects against the penetration of water, oils, grease and moisture.

SIZE DESCRIPTION 1 Lt

144

Bottle

PART # BEL-000040

PRICE $ 66.00

SIZE DESCRIPTION 1 Lt

Bottle

PART #

PRICE $

BEL-000042

114.00

ENHANCERS Impregnation Remover

Idea Black Deep black protective impregnating agent for treatment of black granites and stones. It is perfect to enhance color on polished black granites, where other products have difﬁculty to work properly. IDEA BLACK enhances the black color of treated stone, allows to hide scratches, ﬂaws and imperfections of black stones.oil and other penetrating substances.

SIZE

PART #

750 ml

BEL-000015

PRICE $ 47.75

Idea XC IDEA XC is a new impregnating sealer to protect stones against water, oil, grease and humidity giving an attractive wet-look effect; optimum also for polished materials. When applied, IDEA XC penetrates into the stone without forming unsightly plastic ﬁlms. IDEA XC will allow the stone to support water and be oil repellent by penetrating deeply into the stone, protecting it from water and oily substances but allowing the stone to breathe while the humidity can evaporate, therefore blocking efﬂorescence. The constant research for latest generation raw materials has permitted us to produce new water and oil repellent, which can enhance the color of stone and at the same time protect it from stains caused by oil and other penetrating substances.

Akemi Impregnation Remover can remove enhancing products such as Agers, Transformers and Darkeners that did not provide the desired enhancing effect. It removes solvent and water-based impregnator treatments as well. This remover is best for restoration projects and can be used to effectively remove new, uneven, or old treatments. Remove all deep penetrating products. The only things you need to use are water and a brush to remove the product from the stone surfaces when the stripping process has finished. Concentrated, gel-like, highly alkaline cleaning agent, without odor and solvents. It is also biodegradable! It is designed to remove stains caused by impregnations, as well as heavy dirt like residue of lacquers on natural stone, concrete, ashlar and clinker. This great remover is suitable for horizontal surfaces as well, like floors and table tops and vertical applications of facades and wall coverings due to the gel-like consistency. Note: Impregnation Remover corrodes polished marble, limestone, resin-bonded artificial stone and terrazzo, as well as eloxal and enamel. Do not use it on artificial stone, which is sensitive to alkalis, painted surface or similar. If in doubt, test on an inconspicuous area. SIZE

PART #

PRICE $

1 QT

AKE-CARE-12003

48.95

SPIDER Polishing and care product which hides microfissures and the spider web effect that can be seen on certain dark or black stones. Suitable for fine ground or polished natural and artificial stones, can easily be polished on and renewed if necessary. For indoor use. Coverage: approx. 15-30 m2/liter

SIZE

PART #

1 Lt

BEL-000017

PRICE $ 21.50

SIZE

DESCRIPTION

PART #

1 Qt 1 Qt

Black Clear

AKE-CARE-10963 AKE-CARE-10964

PRICE $ 35.00 35.00

145

ENHANCERS Stone Sealer Matte Finish

Idea Quarzo Hydro and oil repellent protective, impregnating enhancer with extra darkening action for quartz-resin surfaces and against the penetration of water, oils, grease and moisture.

Due to

Certiﬁed for foodstuff direct contact.

SIZE

PART #

PRICE $

1 Lt

BEL-000055

70.50

Super-Gloss

SIZE

DESCRIPTION

PART #

1 Qt 1.3 Gal

Bottle Canister

AKE-CARE-10840 AKE-CARE-10841

PRICE $ 24.95 99.95

Stone Sealer Satin Finish 90

For re-working of rough, ground, porous and absorbent natural and artiﬁcial stone surfaces. Especially suited for surfaces on which mechanical polishing is difﬁcult or impossible due to their condition or position, e.g. edges, corners, reliefs, statues, frescos, columns or borders.

SIZE

DESCRIPTION

PART #

25 Oz

Bottle

AKE-CARE-10976

PRICE $ 30.95

CLEANERS STONETECH® Revitalizer® Cleaner & Protector Our ﬂagship cleaner. Easily and safely removes soils while reinforcing protection for easy cleaning. Cleans common messes while reinforcing protection. Built-in sealer makes surfaces easier to clean. Gentle formula, great for stone countertops and everywhere else.

2 Oz

146

ST-D14608345

Citrus Sample - Ready to Use Citrus Spray - Ready to Use Citrus - Ready to Use Citrus Concentrated Citrus Concentrated Cucumber Spray - Ready to Use Cucumber - Ready to Use

2.00 11.95 23.50 41.00 177.00 11.95 23.50

SIZE

DESCRIPTION

PART #

1 Qt 1.3 Gal

Bottle Canister

AKE-CARE-10838 AKE-CARE-10839

PRICE $ 22.95 96.95

CLEANERS Crystal Clean Spray

Triple Effect Spray Pumpspray for the regular care and protection of ﬁne ground and polished natural and artiﬁcial stones. Three effects are achieved in one single operation: deep cleaning, water, oil and grease repellent protection, restores luster.

Multi-purpose cleaner for everyday use in kitchen areas and especially bathrooms. Crystal Clean works great on stainless steel, and all natural / engineered stone as well as porcelain and ceramic.

Coverage: approx. 15-25 m2/liter SIZE

PART #

DESCRIPTION

500 ml

AKE-CARE-10954

Bottle

PRICE $ 10.95

SIZE

PART #

DESCRIPTION

PRICE $

Bottle Bottle

8.5 Oz AKE-CARE-11853 17 Oz AKE-CARE-10846

12.95 16.95

511 Kleen & Reseal

Counter Kleen

Designed to remove dirt and soil from natural stone and tile, including vanities, showers and furniture and reseals in one easy step. Kleen & Reseal will cut through dirt and soil with no rinsing, no streaking and no soapy residue left behind.

Unique formula designed to remove dirt, dust and light stains from polished natural stone and ceramic tile counters, vanities and furniture.

Contains 511 H2O Plus - Reseals with each use Non Abrasive - Neutral PH - No Acid

PRICE $

PRICE $ 8 Oz 32 Oz

MIR-KLE/RE8OZ MIR-KLE/RE320Z

4.25 12.70

LEM-3 - Detergent

Antigrafﬁti

LEM-3 acts vigorously against dirt and delicately with the material to be cleaned. Pleasantly perfumed and with the pH factor speciﬁcally studied for a deep cleaning of marble or any other stone material without damage, this is surely the detergent for the professional.

This is an esterified, microcrystalline wax-based product added to a special acrylic resin that protects against graffiti applied with ordinary spray cans on sale. The graffiti can be removed with abrasive pad, steel wool or steam, which will melt the layer of the product applied, thus removing the paint. In this way, cleaning is very simple and ecological.

PRICE $ 1 Lt

BEL-000025

8.95

PRICE $ 1 LT

BEL-000060

STONETECH® Soap Scum Remover

STONETECH® Stone Tile & Cleaner

Removes stubborn soap scum, hard water stains, and dirt without scratching your natural stone, ceramic, porcelain or glass tile.

• Cleans everyday messes • Neutral, gentle formula • Great for countertops, stone & ceramic tile ﬂoors

• Cleans and shines with ease • Fresh clean scent • Professional Grade PRICE $ 11.50

16.75

DESCRIPTION

PRICE $

Ready to Use Concentrated Concentrated

8.75 10.25 30.75

147

CLEANERS Porcelain & Ceramic Tile Cleaner

Tile & Stone Cleaner

PRICE $ 3.99 11.50 8.75 18.75

PRICE $ 1 Qt 1 Gal

MIR-PCTCQT MIR-PCTCGAL

8.00 21.00

STONETECH® Restore Acidic Cleaner Concentrate

Limestone & Travertine Stone Soap (Formerly known as Mira Soap)

PRICE $ 2.00 12.50 37.50 158.00

Ultra Stripper Cleaner

PRICE $ 1 Qt 1 Gal

MIR-LTSSQT MIR-LTSSGAL

25.50 12.00

STONETECH® KlenzAll Cleaner

Cleaner with high detergent power for removal of dirt: grease, smog, oily dirt. It is also excellent for removing any kind of wax like metallic, acrylic waxes, and solvent based waxes applied on ﬂoors or façades. ULTRA STRIPPER is indicated for the heavy stripping of ﬂoors before grind. It is also indicated to clean grout of tiles.

148

SIZE

PART #

PRICE $

1 Lt

BEL-000024

13.50

PRICE $ Ready to Use Concentrated Concentrated Concentrated Concentrated

10.75 2.00 12.50 37.50 159.00

CLEANERS Epoxy Grout Film

Poultice Plus

Remover (Non-acid)

Easy to use, ﬁne, non-acidic absorbent powder designed to work with different cleaners/chemicals to draw out most stains from most absorbent surface materials.

Liquid Poultice Part A & Part B Safe cleaner designed for deep cleaning all porous materials and grout including acid sensitive surfaces. The cleaning action of Liquid Poultice penetrates deep into the pores of the surface to safely lift out various types of dirt and grime. It is especially effective for cleaning organic materials like coffee and tea.

1 Qt 1 Gal

MIR-LIQQT MIR-LIQGAL

STONETECH® Heavy Duty Coating Stripper Highly effective water-based coating stripper removes tough coatings, lacquers, varnishes, and epoxy grout haze. • Low odor and non-ﬂammable • Easy to use, water-based formula

2.00 36.50 103.00

19.75 55.00

Heavy Duty Acid Cleaner

Phosphoric Acid Cleaner

Fast acting, for textured, non-polished, natural and manufactured surfaces. It removes sanded grout and mortar residue, joint cement, lime and hard water deposits, efﬂorescence, rust and other heavy dirt and grime.

Cleaning for cast surfaces including pre-cast concrete, non-polished natural surfaces including ﬂamed and honed granite, tumbled and honed marble, cleft & hone slate, quarry tile, ﬂamed and honed limestone, unglazed ceramic tile, porcelain tile, cement grout, brick, concrete, mortar and masonry.

1 Qt 1 Gal

(Formerly known as GCFR - Grout & Concentrate Film Remover)

MIR-HDACQT MIR-HDACGAL

7.00 20.00

Residue Remover Solvent-base formula designed to remove accumulated residue build-up on the surface, due to over applying solventbase penetrating sealers/impregnators. Residue remover is also useful for cleaning application tools for re-use.

MIR-PHOSQT MIR-PHOSGAL

12.00 24.50

STONETECH® Stainless Steel Pro Cleaner

PRICE $ 1 Qt 1 Gal

MIR-RES/REMQT MIR-RES/REMGAL

8.00 24.50

9.50

149

CLEANERS Spot Remover Mangiamacchia

Bar Keepers Friend

Stainless Steel Cleaner and Polisher

It removes oil, grease, coffee, ketchup spots and others. Apply a layer of 5 mm thickness. After 2/3 hours, once dry, remove using a brush.

250 ml

Samples Available

STONETECH® Oil Stain Remover Great for stones that have been stained. It pulls out deep-set oil stains and leaves no residue behind. The easy-to-use formula comes in a useful resealable 3oz can. This is great for the common household stain.

BEL-000018

15.00

GTX Tile & Grout Cleaner Highly effective detergent for cleaning the joints and gaps between the marble tiles, granite, stone, cement, pottery and stoneware. It is effective for the removal of fatty, oily and even old dried dirt, including old food substances. GTX does not affect the health and metal surfaces (faucets, sinks, cooktops).

500 ml

BEL-000023

11.95

Rust Remover Mangiaruggine

3 Oz 1 Pint

ST-D12446896 ST-D12446904

5.75 23.75

Rust Remover Paste

Gel product, especially formulated for the elimination of stains of rust on all lapideous materials. It can be safely used also on polished marbles, without ruining the shine. The RUSTEATER Gel acts quickly and it removes rust without effort.

250 ml

BEL-000021

13.00

VIP 10 Cleaner Spray VIP10 is a special cleaner with whitening action, that could be used to remove purple shades left by application of our Rust Remover “MangiaRuggine”, even on white or clear materials. VIP10 has neutral pH, so does not damage the material.

150

SIZE

PART #

1Qt

AKE-CARE-10824

PRICE $ 34.95

500 ml

BEL-000029

15.95

CLEANERS Rust Remover

Rust Remover Marble

SIZE

PART #

DESCRIPTION PRICE $

1Qt

AKE-CARE-10814

Bottle

24.95

RSR-2000 Rust Stain Remover Gel Form

SIZE

PART #

DESCRIPTION PRICE $

17 Oz

AKE-CARE-10899

Bottle

24.95

Quartz Intensive Cleaner Stain Remover An acid-free, ready-to-use cleaner, free of phosphates and bases, biologically degradable. For a weekly cleaning of kitchen work tables, countertops and other surfaces made of quartz-based stone. Cleans intensively superﬁcial stains, especially dirt containing oil and grease.

SIZE

PART #

DESCRIPTION

250 ml

AKE-CARE-11948

Bottle

PRICE $ 10.95

Stain Removers Premixed poultices that draw the stain from the stone. It can easily be used on horizontal or vertical applications, interior or exterior.

SIZE

PART #

DESCRIPTION

PRICE $

Alpha® General Stain Remover is designed for the removal of most organic based stains, such as, oil, coffee, tea and food stains.

1 Lb 5 Lb 1 Lb 5 Lb

A-ADGSR-01 A-ADGSR-05 A-ADRSR-01 A-ADRSR-05

General General Rust Rust

12.50 45.60 12.50 47.40

5Lb poultice covers approximately 15 square feet.

Alpha® Rust Stain Remover is designed to remove ferrous oxide (rust) stains caused by iron, copper, bronze or other metals. It is important to remember that iron is sometimes present in most types of natural stones therefore stains from these natural iron minerals will be difﬁcult, if not impossible, to remove.

151

CLEANERS STONETECH® DeepKlenz™ Cleaner Ready to Use

Quartz Counter Top Cleaner Maintenance cleaner for: Quartz, Marble, Granite, Travertine, Limestone, Ceramic Tile. Unique formula designed to remove dirt, dust and light stains from quartz, natural stone and ceramic tile counters, vanities and furniture. No rinsing, no streaking and no soapy residue. Just spray and wipe. COVERAGE: Up to 500 sq ft per 32 oz. Easy-to-Use - Safe to Use - Non Streaking No Rinse - Safe for Food Areas

• Removes deep stubborn grease and food stains • Safe on stone • Professional strength • Prepares surface for resealing • Water-based alkaline formula • Professional strength formulation • Easily removes deep & stubborn grease, oils, and food stains

SIZE

PRICE $

SIZE

PART #

PRICE $

10.95

24 Oz

ST-D12549683

14.00

32 Oz

PART # MIR-QCC32OZ

Oil and Grease Remover Paste

STONETECH® Stone Care Kit All-in-one care kit designed to protect and maintain natural stone surfaces. Care kit includes STONETECH Heavy Duty Sealer (Quart) and STONETECH Revitalizer Cleaner and Protector - citrus scent (24 oz spray) RECOMMENDED SURFACES: Natural stone such as marble, granite, limestone, slate, bluestone, quartzite, travertine, sandstone, ﬂagstone and saltillo tile.

SIZE

PART #

DESCRIPTION

8.5 Oz AKE-CARE-10896

Tube

PRICE $ 20.95

Quartz Clean & Care Spray

PART #

PRICE $

ST-D15022163

57.75

Quartz Care Set

All-in-one cleaner and protectant for quartz Used for cleaning, protection and care of quartz-based surfaces in a portable case of elegant design.

Use for daily cleaning and care of kitchen tops, counters, and other surfaces of quartz-made stone. It gets rid of dirt, oil, grease, and other unwanted materials that can sit on our countertops and seep into your porous stone.

152

SIZE

PART #

DESCRIPTION

500 ml

AKE-CARE-11951

Bottle

Content: 250 ml Quartz Clean & Care; 250 ml Quartz Intensive Cleaner; 250 ml Quartz Polish; 1 cloth; 1 polishing cloth PRICE $ 17.95

PART #

DESCRIPTION

PRICE $

AKE-CARE-11961

Quartz Care Set

41.95

CLEANERS Marmo Care System

Algae and Mildew Remover

Protecting the environment where we live allows us to live with great comfort. The kitchen is the place where we enjoy the best moments Marmo Care System is a set of products formulated to clean, protect and shine surfaces of marble, granite and stones.

It can be used on outdoor and indoor to remove and kill algae, mildew and moss deposits on stone. It can also remove organic stains from stones such as wine, coffee, tea, ink, blood, etc. and may affect the gloss of some stones. Always test before use. POWER is a liquid and should be incorporated with a soft bristled brush to ensure good penetration into the stone.

Marmo Cleaner: water-based cleaner ECOLABEL, ready to use, formulated to remove any dirt without damaging the surface of the marble, granite or stones of the KITCHEN /BATHROOM TOP, Its effectiveness is immediate on coffee stains, tea, cooking oil and ketchup. It is certified and guaranteed for foodstuff direct contact. Marmo Protection: protective, water-based, odorless, and longlasting; designed specifically for the KITCHEN/BATHROOM TOPS in marble, granite and stones. Thanks to the special water-based formula, it guarantees a strong waterproofing and allows breathing of natural stones. Marmo Protection is a water-based, non-toxic, non-flammable product. It is certified and guaranteed for foodstuff direct contact.

SIZE

PART #

DESCRIPTION

PRICE $

1 Lt

AKE-CARE-10832

Bottle

24.95

STONETECH® Mold & Mildew Stain Remover

Marmo Shine: polisher, water-based, odorless, and long-lasting, designed speciﬁcally for the KITCHEN /BATHROOM TOPS in marble, granite, stones. Thanks to its special formula which guarantees a long lasting glossy surface and stain free, with minimal cleaning. It is certiﬁed and guaranteed for foodstuff direct contact.

3x250ml

BEL-000263

33.95

11.50

Quartz Care System Protecting the environment where we live is what allows us to live our lives peacefully; the kitchen is the environment in which we create the best moments, that's why we must use Quartz System! Quartz Cleaner is a water-based cleaner ECOLABEL, ready to use, formulated to remove any dirt without altering the KITCHEN TOP resin top surface, its effectiveness is immediate on wine stains, coffee, tea, lemon, cooking oil, ketchup. Quartz Protection is the protective polish, water-based, odorless, and durable, designed speciﬁcally for the KITCHEN TOP in resin quartz. Thanks to the special formula it guarantees a long lasting glossy surface and stain free, with minimal cleaning.

2x250ml

BEL-000022

32.50

153

CLEANERS Miracle Heavy-Duty Cleaner

Oxalic Acid

(Acid Substitute)

Rust & Stain Remover

Ready-to-use NO-VOC cleaner as strong as an acid without the harmful effects: Granite, All Marble, Natural Stone, Slate, Limestone, Ceramic Tile, Quarry Tile, Grout, Polished Stone, Concrete, Masonry Surfaces A revolutionary patent-pending water-based industrial cleaner designed to remove grout haze, built-up grease, dirt and stains from all ceramic, porcelain, grout, glass and natural stone. It will not hurt or remove the ﬁnish or polish on acid sensitive surfaces including marble. Now for the ﬁrst time an industrial strength cleaner as strong as an acid without the harmful effects. Miracle Heavy-Duty Cleaner addresses dirt and grime at the molecular layer penetrating deep underneath the staining agent. It is a non-corrosive water based cleaner with a mild PH. It leaves behind a monomolecular layer bonded to the surface that makes the surface more resistant to future dirt and stain build-up. Unlike acid cleaners, it will not harm your skin even though one should always wear protective gloves and eye protection as an extra safety precaution whenever cleaning any surface. This product is stable in both hot and cold climates. COVERAGE: 175 – 350 sq ft per gallon.

Oxalic acid can be used as a bleaching agent for wood and stone. It effectively removes mustard, ink, various food stains, and other types of stains. Oxalic acid is a gentle stain remover that eats the stain but leaves the base surfaces such as wood, intact. Use Oxalic acid to remove most stains found on stone, brick, linoleum, wood and vinyl surfaces. However, do not use Oxalic acid on sealed surfaces as its acid will eat through the ﬁnishing. Oxalic acid is also used to remove rusts that are commonly found on plumbing pipes and kitchen countertops. This product is also a major ingredient found in commercial rust removers for sinks, tubs and metal rust stains. SIZE

PART #

PRICE $

1 Lb 2 Lb 5 Lb 10 Lb 55 Lb

SC-OXALIC-01 SC-OXALIC-02 SC-OXALIC-05 SC-OXALIC-10 SC-OXALIC-55

4.50 8.00 19.50 37.50 191.50

511 Porcelain & Ceramic Tile Clean & Reseal

Industrial Strength - No-VOC - OK for Acid Sensitive Materials Great for Grout Haze Removal - OK on Polished Surfaces Ready-to-Use (One Step) - Easy-to-Use - Fast Acting PRICE $ 1 Qt 1 Gal

MIR-MHDCQT MIR-MHDCGAL

8.50 28.00

Spray & wipe cleaner & re-sealer for: All Ceramic Tile, Porcelain Tile, Polished or Unpolished Natural Stone, Quartz. Unique formula designed to remove dirt, soil and water stains from ceramic tile, porcelain tile and natural stone including vanities, counters, ﬂooring and more. It will cut through dirt and soil with no rinsing, streaking or soapy residue left behind. 511 Porcelain & Ceramic Tile Clean & Reseal is safe for all types of surfaces. It is necessary to seal surface ﬁrst with appropriate 511 Porcelain & Ceramic Tile Sealer before using this maintenance product. COVERAGE: Up to 500 sq ft per 32 oz.

Water Ring & Etch Remover

Re-Seals with Each Use - Neutral pH is Safe for All Surfaces No Scrubbing - No Acid - Safe for Counters - Non Abrasive Ready-To-Use - Safe for Food Areas

PRICE $

PRICE $ 32 Oz

154

MIR-PCTC&R32OZ

12.75

WAXES AND POLISHERS Bellinzoni Paste Wax

12 Oz 12 Oz 1.3 Qt 1.3 Qt

BEL-000001 BEL-000002 BEL-000004 BEL-000005

6.15 6.75 16.00 18.00

A top quality concentrated wax, dissolved in an non-inflammable solvent. A paste with exceptional polishing and protective power, due to the extremely high quality of raw materials used in its preparation. It penetrates into the material (marble, granite or stone agglomerates) and if it is then rubbed with fine steel wool, a felt pad, or a dry woollen or cotton cloth, a uniform brilliant and longlasting mirror-finish will be achieved. Its special composition fills and seals porosities in the material and covers small scratches.

Italian Craftsman

Bellinzoni RR/1

Cleans, Polish & Protects

A warm, dry and long-lasting polish can be achieved with RR/1 which will last through several cleaning operations. It is a highly concentrated product so it can be heavily diluted in water, making it very economical to use. RR/1 is also pleasantly perfumed. It provides long-lasting resistance to damage from foot trafﬁc and does not leave patches. It does not contain any of the resins that cause unsightly ﬁlms. SIZE

PART #

DESCRIPTION

PRICE $

400 ml 1 Lt

BEL-000262 BEL-000026

Spray Liquid Wax

14.50 10.25

Italian Craftsman Polish is speciﬁcally formulated to clean, shine and protect granite, marble, polished stones, wood, formica and metal. • Great for maintaining and preserving countertops and vanities • Renews polished surface • Contains no wax • Helps to protect against rings and stains

Stone Polish Silicone-Based

Quartz Polish

Gives smooth polished ﬁnish and some surface protection to quartz (does not add gloss) S

SIZE

PART #

DESCRIPTION PRICE $

250 ml AKE-CARE-11950

Stone Polish

Bottle

410.95

SIZE DESCRIPTION 8.5 Oz

Bottle

PART #

PRICE $

AKE-CARE-10844

10.95

STONETECH® Polish

• Adds brilliant shine to polished stone • No greasy ﬁlm, will not streak • Easy to use formula • Great for kitchen and bathroom countertops

SIZE

PART #

PRICE $

2 Oz 24 Oz

ST-D12550808 ST-D14579661

2.00 18.50

155

WAXES AND POLISHERS Bellinzoni Super Lux E3

Dia-Glo Bufﬁng Compounds

Liquid product studied to polish and boost color of every stone material; it protects and polishes marbles, granites and stones edges. Application of SUPERLUX E3 makes unnecessary the following polishing of treated material.

Dia-Glo™ brand buffing compounds are formulated to achieve the best possible finish on stone surfaces. Easy to use, they quickly produce a mirror-like finish. These compounds can be used in stone fabricating shops, for floor restoration and for maintenance buffing. MARBLE: The Dia-Glo M™ brand compound is formulated for marble surfaces, and also performs well on terrazzo and agglomerated marble.

SUPERLUX E3 is particularly suitable to be used on corners and edges, it strongly enhances color and shine to material smmothed up to 800 grit.It is available in spray form for rapid and longlasting treatment, replacing the paint-brush and cloths and facilitates the polishing of engraving-work or difﬁcult corners that otherwise cannot be treated.

DARK GRANITE: The Dia-Glo D™ brand compound is designed for dark granite. Its dark hue will not accentuate normal microscopic cracks on dark granite surfaces and will bring out the rich color and gloss on medium to dark stones. LIGHT GRANITE: The Dia-Glo L™ brand compound is designed for light colored granite. The Dia-Glo S™ brand compound system is a three-part system to be used for restoring black granite to its original high gloss and deep color.

SUPERLUX E3 is available in liquid and spray version.sinks, tubs and metal rust stains.

SIZE

PART #

PRICE $

750 ml

BEL-000027

14.00

SINGLE LIQUID COMPONENT: Dia-Glo S™ brand compound system is a three-part system to be used for restoring black granite to its original high gloss and deep color.

STONETECH® Polishing Powder

PRICE $ 54.00

5X Marble Polishing Powder Gialla It should be used as a ﬁnal polishing to close the porosity of the material and increase brightness. Can help reduce the cost of the polishing since, depending on the marble, it can replace the last grain of diamond used for polishing.

156

SIZE

PART #

PRICE $

2.2 lbs 44 lbs

BEL-003064 BEL-000028

19.75 245.00

SIZE

PART #

DESCRIPTION

PRICE $

1L 10 L 55 L

AT-C920M003 AT-C920M024 AT-C920M055

M Powder M Powder M Powder

32.50 252.50 659.50

1L 10 L 55 L

AT-C920GD03 AT-C920GD24 AT-C920GD055

D Powder D Powder D Powder

26.50 224.50 659.50

1L 10 L 55 L

AT-C920GL03 AT-C920GL24 AT-C920GL055

L Powder L Powder L Powder

26.50 224.50 659.50

1 Qt 5 Qt 1 Pint 5 Qt

AT-C920SL02 AT-C920SL01 AT-C920SP02 AT-C920SP01

S Spray Bottle Liquid S Liquid S Powder S Powder

41.50 152.50 41.50 152.50

KIT

AT-C920SKIT

500 Square Foot Kit

152.50

WAXES AND POLISHERS 5X Powder - Final Polishing For Marble 1 Lb 2 Lb 5 Lb 10 Lb 20 Lb 44 Lb

SC-5XPOWDER-01 SC-5XPOWDER-02 SC-5XPOWDER-05 SC-5XPOWDER-10 SC-5XPOWDER-20 SC-5XPOWDER-44

Super Crystal Powder for Marble

4.95 9.50 23.75 46.75 89.95 189.95

A blend of high quality polishing materials that is a very effective on polishing all marbles, limestone, terrazzo and other calcium containing stone or properly honed concrete. This product will pop an amazing shine quickly.

Super Crystal Marble GREEN For final polishing and re-polishing of marble, agglomerate, marble-cement, terrazzo and limestone floors. The product works on calcareous materials only. SUPER CRYSTAL hardens the surface and protects it from scratches and scrapes, giving a long lasting shine and restoring the beauty of the material. It is the ideal product for the restoration of surfaces worn by time or by foot traffic. It also allows to harden the surface subject to heavy traffic. To be used with water and a buffing pad to get excellent results.

This powder is used as a final step in achieving the high reflectivity finish that is seen on polished marble tiles and slabs. To be used with water and a buffing pad to get excellent results.

SIZE

PART #

PRICE $

SIZE

PART #

PRICE $

2.2 lbs 55 lbs

BEL-003063 BEL-003048

19.75 249.00

2.2 lbs 55 lbs

BEL-003062 BEL-003049

19.75 249.00

Super Crystal Powder for Granite

Eureka Marble Polishing Gel for Marble “Eureka” is the new gel for polishing surfaces in marble and limestone materials in a simple and fast way, using a buffing machine or a grinder. It can be used on polished materials above grit 400 or in alternative to crystallizers or polishing powders. EUREKA a polishing gel specifically formulated to polish new marbles, or to repolish floors that lost their brightness and color from wear. “Eureka” does not contain lead.

Polishing powder for last step or repolish of granite.

SIZE

PART #

PRICE $

2.2 lbs 44 lbs

BEL-003061 BEL-003050

19.75 252.00

SIZE

PART #

PRICE $

1 Lt

BEL-003053

38.50

Eureka Granite Polishing Gel for Granite

Eureka Quartz Polishing Gel for Quartz

"Eureka" is a new polishing gel, Special for polishing granites and gres quickly and easily, just using a single disc machine or a grindinghoning machine. It is possible to use it on smoothed materials, starting from grain 220 and above, or in alternative to tin oxide. It is a gel product, specifically designed to polish new granites and gres surfaces, or to restore polish floors that lost shine and color by high traffic. "Eureka" does not contain lead.

EUREKA is a new polishing gel, special for polish quartz resin quickly and easily, just using a single disc machine. EUREKA QUARTZ speciﬁcally is the ideal product for polishing engineered stones quartz based. Material can be treated to restore or to increase the original gloss, to enhance the color and to correct imperfections caused by natural wear and tear of materials.

SIZE

PART #

PRICE $

SIZE

PART #

PRICE $

1 Lt

BEL-003051

39.00

1 Lt

BEL-003052

39.50

157

WAXES AND POLISHERS Granite Brite (Non-Acid)

Mira Dust (Acid)

PRICE $

Mira Hone (Non-Acid)

Honing Powder

PRICE $

Tile Restor (Non-Acid)

SIZE

PART #

DESCRIPTION

PRICE $

1.9 Lbs 1.9 Lbs 1.9 Lbs 1.9 Lbs 1.9 Lbs

ST-D12447194 ST-D12447227 ST-D12447250 ST-D12447289 ST-D12447316

Canister -180 Canister - 280 Canister - 400 Canister - 600 Canister - 800

71.00 71.00 71.00 71.00 71.00

Tile Brite (Non-Acid)

PRICE $

Polishing Bars

158

OTHER CHEMICALS AND ACCESSORIES Acetone

Denatured Alcohol

100% pure. Strong, fast-acting. Thins ﬁberglass and polyester resins, vinyl and adhesives. Also use as a clean up solvent after completing ﬁberglass projects.

Produces a hot, clean, odorless and smokeless ﬂame that’s ideal for marine stoves and other alcohol-burning appliances. It also cleans glass.

Lacquer Thinner

Mineral Spirits

This high solvency thinner is used to dilute, dissolve and clean up lacquer. It can also be used to remove adhesive residue from a variety of surfaces. Test in an inconspicuous area ﬁrst.

Excellent for thinning oil-based paint Prepares surfaces for painting Excellent for thinning stain & varnish Cleans surfaces

• High-solvency • Medium drying thinner • Excellent for cleaning brushes and equipment

Haze b Gone

Bar Keepers Friend

Haze b Gone is a safe, environmentally friendly and easyto-use method for removing Portland cement grout haze and mortar residue from ceramic tile, porcelain tile, glass tile and natural stone surfaces. No more harmful acids or other time consuming liquids that require drying before completion. Never has grout haze removal been so easy. Each pad comes with enough activator to do up to 1,000 square feet. Then the pad can be re-used by just re-ﬁlling the active ingredient up to 5 times.

Makes quick work of cleaning pots, pans and other tough tasks normally done by hand.

Grout Haze Remover

Sponge Spinner

Place a moistened sponge of your choice (approximately 3" x 5") onto the BKF Sponge Spinner (as shown) and slide the o-ring over both until secured in place. Attach spinner to cordless screwdriver (not a drill). 200 rpm 600 rpm is a good range. Apply BKF product to wetted surface of pan, then use BKF sponge spinner to provide the muscle and save yours.

BKF-SP52402 Sponge, 1 O-ring, 1 Drill Attachment

5.95

159

OTHER CHEMICALS AND ACCESSORIES Sealer Applicator Tray The Miracle Sealer Applicator & Tray can be utilized with all 511 products (except Mira Matte), as well as other sealers and enhancer brands. It has a unique foam pad that holds the sealer/enhancer within the pad. This foam aids in evenly distributing the product over the surface being treated and allows for a more controlled application.

PART #

DESCRIPTION

MIR-APLTRAY

Mira Brush Applicator (Sealer Appl)

$ EACH 3.50

Grout Pens

PRICE $

Note: Special Order Grout Pens in Single & Double Packs must be ordered minimum 6 packs per case.

Travertine Fill Kit COLOR MATCHED FILL FOR: All Travertine, All Limestone Miracle Travertine Fill Kit permanently repairs holes, missing travertine ﬁll and cracks. The search is over for an easy-to-use complete travertine ﬁll kit. With both light and dark powder included, the color matching options are endless. COVERAGE: 50 - 200 square feet per pint (depending on holes per sq ft). Container sizes: 1 - 8 oz. Light, 1 - 8 oz • Dark container per box. Dries to a Matte Finish - Long-Lasting Repairs Increased Durability - Create Custom Colors Just Add Water, Mix and Apply

160

PART #

PRICE $

MIR-TRAVFIL

13.50

18 Classic kitchen sink designs with 5 sophisticated colors to create a classy combination of sink and countertop.

Made with up to 80% natural quartz, the hardest constituent of granite, Duragranit sinks sets extraordinary standards in terms of surface feel, practicality and aesthetics. With its durable, long lasting, and ultra-ď&#x20AC; ne nanostructure, these sinks create an enhance smoothness you can really feel, making them easier to clean than you ever thought possible.

DURAGRANIT

COLORS

25”

SIS-GR105-01 SIS-GR105-02 S SIS-GR105-03 SIS-GR105-04 SIS-GR105-05

20-3/4”

Depth = 8-1/2”

Depth = 8-21/32”

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

PART# SIS-GR102-01 SIS-GR102-02 S SIS-GR102-03 SIS-GR102-04 SIS-GR102-05

PART# SIS-GR106-01 SIS-GR106-02 S SIS-GR106-03 SIS-GR106-04 SIS-GR106-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

225.00 225.00 225.00 225.00 225.00

15-3/4”

14-7/8”

12-13/16”

SIS-G-GR107 $22.00

15-3/4”

Depth = 6-5/8”

164

SIS-G-GR102 $34.00

17-15/16”

12-13/16”

SIS-GR107-01 SIS-GR107-02 S SIS-GR107-03 SIS-GR107-04 SIS-GR107-05

20-7/8”

22-1/4”

14-7/8”

PART#

17-15/16”

PART#

SIS-G-GR101 $26.00

16-13/32”

22”

SIS-GR101-01 SIS-GR101-02 S SIS-GR101-03 SIS-GR101-04 SIS-GR101-05

23-5/8”

19-1/4” PART#

Depth = 7-7/8”

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

199.00 199.00 199.00 199.00 199.00

PART# SIS-GR115-01 SIS-GR115-02 S SIS-GR115-03 SIS-GR115-04 SIS-GR115-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

245.00 245.00 245.00 245.00 245.00

SIS-G-GR115 $22.00

DURAGRANIT

COLORS

16-3/4"

20”

SIS-G-GR201 $34.00

17-3/4”

32-1/2”

17-9/16”

SIS-G-GR201B $34.00

11-1/2”

Depth = 10” / 10” PART# SIS-GR201-01 SIS-GR201-02 S SIS-GR201-03 SIS-GR201-04 SIS-GR201-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

PART# SIS-GR201B-01 SIS-GR201B-02 S SIS-GR201B-03 SIS-GR201B-04 SIS-GR201B-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

299.00 299.00 299.00 299.00 299.00

33”

12”

20-3/4”

18-1/2"

15”

17-1/4”

20-5/16”

SIS-G-201CR $34.00

SIS-G-GR202 $34.00

18-5/16”

Depth = 7-1/4” / 9” PART#

COLOR

PRICE $

SIS-GR201CR-01 SIS-GR201CR-02 S SIS-GR201CR-03 SIS-GR201CR-04 SIS-GR201CR-05

Black Sand Wheat Iceberg Grey Moon Chocolate

299.00 299.00 299.00 299.00 299.00

PART# SIS-GR202-01 SIS-GR202-02 S SIS-GR202-03 SIS-GR202-04 SIS-GR202-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

15-1/8”

SIS-G-GR202B $34.00

20-1/2”

31”

13-5/8”

SIS-G-GR202C $34.00

13-5/8”

Depth = 8-15/16” / 8-15/16” PART# SIS-GR202B-01 SIS-GR202B-02 S SIS-GR202B-03 SIS-GR202B-04 SIS-GR202B-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

299.00 299.00 299.00 299.00 299.00

PART# SIS-GR202C-01 SIS-GR202C-02 S SIS-GR202C-03 SIS-GR202C-04 SIS-GR202C-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

299.00 299.00 299.00 299.00 299.00

165

DURAGRANIT

COLORS

14-9/16”

15-1/8”

Depth = 10” / 10” COLOR

PRICE $

SIS-GR202CLD-01 SIS-GR202CLD-02 S SIS-GR202CLD-03 SIS-GR202CLD-04 SIS-GR202CLD-05

Black Sand Wheat Iceberg Grey Moon Chocolate

299.00 299.00 299.00 299.00 299.00

PART# Low Divider

SIS-GR202D-01 SIS-GR202D-02 S SIS-GR202D-03 SIS-GR202D-04 SIS-GR202D-05

SIS-G-GR202D $34.00

15-1/8”

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

19-11/16”

17-1/2”

SIS-G-GR202E $34.00

14-1/2”

14-3/16”

Depth = 9-1/2” / 9-1/2”

SIS-GR202E-01 SIS-GR202E-02 S SIS-GR202E-03 SIS-GR202E-04 SIS-GR202E-05

33-7/8”

19-1/2”

32”

PART#

Depth = 10” / 10”

PART#

14-1/2”

18-5/16”

SIS-G-GR202CLD $34.00

16-11/16”

22”

14-9/16”

33”

16-3/4”

33”

SIS-G-GR202E $34.00

14-3/16”

Depth = 7-11/16” / 7-11/16”

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

PART# SIS-GR202F-01 SIS-GR202F-02 S SIS-GR202F-03 SIS-GR202F-04 SIS-GR202F-05

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

16-5/8” 22”

19-5/16”

33”

16-5/8”

SIS-G-GR204LD $34.00

12-1/2”

Depth = 10” / 10” PART# SIS-GR204-01 SIS-GR204-02 S SIS-GR204-03 SIS-GR204-04 SIS-GR204-05

166

COLOR

PRICE $

PART#

COLOR

PRICE $

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

SIS-GR204LD-01 SIS-GR204LD-02 S SIS-GR204LD-03 SIS-GR204LD-04 SIS-GR204LD-05

Black Sand Wheat Iceberg Grey Moon Chocolate

285.00 285.00 285.00 285.00 285.00

Low Divider

Black Sand 01

Wheat 02

Iceberg 03

Brushed Nickel 04

Chocolate 05

Biscuit 06

Cinder 07

Truffle 08

SIS-S01-01 SIS-S06-01

SIS-S01-02 SIS-S06-02

SIS-S01-03 SIS-S06-03

SIS-S01-04 SIS-S06-04

SIS-S01-05 SIS-S06-05

SIS-S01-06 SIS-S06-06

SIS-S01-07 SIS-S06-07

SIS-S01-08 SIS-S06-08

167

Stainless Steel Sinks Stone sinks are made from durable 18 gauge or 16 gauge 304 premium stainless steel, highly resistant to heat, most household stains, and rust for the life of the product.

Stone sinks feature Sound-Shield pads on several strategic areas of every sink for extra sound proofing. Made of natural rubber, the Sound-Shield pads reduce the noise of clattering dishes and running water.

Pro-Vest is a protective coating over the Sound-Shield pads. This system reduces noise, prevents condensation, and helps maintain water temperature when pre-soaking dishes.

All Stone sinks receive expert hands-on care under strict quality control throughout every stage of our modern manufacturing process. This ensures a â&#x20AC;&#x153;NO HASSLEâ&#x20AC;? Limited Lifetime Warranty against all manufacturing defects in material and workmanship under normal use. Please read our Limited Lifetime Warranty policy at our web site: www.StoneUsa.com.

16 Gauge 304 Premium Stainless Steel

The perfect combo! Luxurious look at attainable price. Accessories included*

01 each Bottom Grid Set

01 each 8” Damascus Chef Knife Japanese 67 Layer High Carbon Stainless Steel Blade SIS-CK8

$199 Value!

01 each Deluxe Strainer & Basket SIS-S01

01 each Glass Cutting Board SIS-GCB1709

01 each Salad Strainer SIS-S04

*Only on part numbers starting with “CHEF”

Sink only. Truly functional, durable and affordable, UNIVERSE series meets or exceeds the highest quality standards on today’s market.

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

Grid: $26.00 SIS-G-101

PART#

DEPTH

THICKNESS

PRICE $

CHEF-101 SIS-C101 SIS-101-16 SIS-101 SIS-101-A5 SIS-KC101

10" 10" 9" 9" 5-1/2" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge -

280.00 132.00 115.00 85.00 90.00 85.00

Grid: $26.00 SIS-G-102

PART#

DEPTH

THICKNESS

PRICE $

CHEF-102 SIS-C102 SIS-102-16 SIS-102 SIS-102-A5 SIS-KC102

10" 10" 9" 9" 5-1/2" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge -

280.00 132.00 115.00 85.00 90.00 85.00

*Grids not available. Drain hole in the back.

Grid: $26.00 SIS-G-101

PART#

DEPTH

THICKNESS

PRICE $

SIS-101-DI SIS-101-DI-A5

9" 5-1/2"

18 Gauge 18 Gauge

131.00 151.00

Grid: $26.00 SIS-G-102

PART#

DEPTH

THICKNESS

PRICE $

SIS-102-DI SIS-102-DI-A5

9" 5-1/2"

18 Gauge 18 Gauge

90.00 105.00

16-3/8”

*Grids not available. Drain hole in the back.

Grid: $44.00 SIS-G-103

PART# CHEF-103 SIS-C103 SIS-103 SIS-KC103

170

DEPTH

THICKNESS

PRICE $

9" 9" 9" -

16 Gauge 16 Gauge 18 Gauge -

335.00 179.00 133.00 85.00

Grid: $44.00 SIS-G-104

PART# CHEF-104 SIS-C104 SIS-104 SIS-KC104

DEPTH

THICKNESS

PRICE $

9" 9" 9" -

16 Gauge 16 Gauge 18 Gauge -

315.00 165.00 135.00 85.00

Grid: $34.00 SIS-G-105

DEPTH

THICKNESS

PRICE $

CHEF-105 SIS-C105 SIS-105-16 SIS-105 SIS-105-A5 SIS-KC105

10" 10" 9" 9" 5-1/2" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge -

325.00 175.00 137.00 99.00 119.00 85.00

*Grids not available. Drain hole in the back.

PART#

DEPTH

THICKNESS

PRICE $

SIS-105-DI SIS-105-DI-A5

8-5/8" 5-1/2"

18 Gauge 18 Gauge

115.00 135.00

*Grids not available. Drain hole in the back.

Grid: $22.00 SIS-G-106

PART#

DEPTH

THICKNESS

SIS-106

18 Gauge

PRICE $ 65.00

Grid: $22.00 SIS-G-107

PART#

DEPTH

THICKNESS

SIS-107

18 Gauge

PRICE $ 55.00

Grid: $22.00 SIS-G-109

PART#

DEPTH

THICKNESS

SIS-109

18 Gauge

PRICE $ 61.00

Grid: $22.00 SIS-G-107-DI

PART#

DEPTH

THICKNESS

SIS-107-DI

5-3/4"

18 Gauge

PRICE $ 45.00

POLISHING SYSTEMS

PART#

Grid: $34.00 SIS-G-105-DI

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

171

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

Grid: $22.00 SIS-G-111

PART#

DEPTH

THICKNESS

SIS-111

18 Gauge

PRICE $ 71.00

Grid: $22.00 SIS-G-112

PART#

DEPTH

THICKNESS

SIS-112

18 Gauge

PRICE $ 57.00

13"

Grid: $22.00 SIS-G-113

PART#

DEPTH

THICKNESS

SIS-113

5-1/4"

18 Gauge

PRICE $ 47.00

Grid: $22.00 SIS-G-114

PART#

DEPTH

THICKNESS

SIS-114

7-1/2"

18 Gauge

PRICE $ 57.00

16”

18”

23”

Grid: $22.00 SIS-G-115

Grid: $22.00 SIS-G-116

21”

PART#

DEPTH

THICKNESS

SIS-115

18 Gauge

PRICE $ 69.00

PART#

DEPTH

THICKNESS

SIS-116

18 Gauge

PART#

DEPTH

THICKNESS

18 Gauge

PRICE $ 85.00

15-3/4”

17-3/4”

20-3/4”

Grid: $22.00 SIS-G-117

18-3/4”

172

PART#

DEPTH

THICKNESS

SIS-117

18 Gauge

PRICE $ 81.00

SIS-1714S

PRICE $ 69.00

Grid: $40.00 SIS-G-201 SIS-G-C201

PART# CHEF-201 SIS-C201 SIS-201-16 SIS-201 SIS-201-A5 SIS-KC201

DEPTH

THICKNESS

PRICE $

10" & 8" 10" & 8" 9" & 7-1/2" 9" & 7-1/2" 5-1/2" & 4" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge -

345.00 199.00 149.00 99.00 119.00 85.00

Grid: $34.00 SIS-G-201 SIS-G-C201

PART# CHEF-201R SIS-C201R SIS-201R-16 SIS-201R SIS-KC201

DEPTH

THICKNESS

PRICE $

8" & 10" 8" & 10" 7-1/2" & 9" 7-1/2" & 9" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge -

345.00 199.00 149.00 99.00 85.00

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

14” 16 1/4”

18-3/8” 16-1/8”

27 1/8”

Grid: $34.00 SIS-G-201-DI

PART# SIS-201-DI SIS-201-DI-A5

DEPTH

THICKNESS

PRICE $

9" & 7-1/2" 5-1/2" & 4"

18 Gauge 18 Gauge

113.00 135.00

10”

PART#

DEPTH

THICKNESS

PRICE $

SIS-201-S

8" & 7"

18 Gauge

125.00

Grid: $40.00 SIS-G-202 SIS-G-C202

PART# CHEF-202 SIS-C202 SIS-202-16 SIS-202 SIS-202-A5 SIS-KC202

DEPTH

THICKNESS

PRICE $

10" 10" 9" 9" 5" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge -

325.00 179.00 137.00 99.00 115.00 85.00

Grid: $34.00 SIS-G-202-DI

PART#

DEPTH

THICKNESS

PRICE $

SIS-202-DI SIS-202-DI-A5

9" 5-1/2"

18 Gauge 18 Gauge

105.00 115.00

POLISHING SYSTEMS

13-7/8”

Grid: $34.00 SIS-G-201-S

173

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

Grid: $34.00 SIS-G-202-LD

PART#

DEPTH

THICKNESS

PRICE $

SIS-202-LD

8-1/2"

18 Gauge

155.00

Grid: $34.00 SIS-G-202-S

PART# SIS-202-S

DEPTH

THICKNESS

PRICE $

18 Gauge

125.00

Grid: $34.00 SIS-G-202-SLD

Grid: $47.00 SIS-G-301

PART#

DEPTH

THICKNESS

PRICE $

PART#

DEPTH

SIS-202-SLD

7-7/8"

18 Gauge

125.00

SIS-301

9", 5-3/8" & 7-1/2"

THICKNESS PRICE $ 18 Gauge

189.00

Grid: $34.00 SIS-G-203 SIS-G-C203

PART# CHEF-203 SIS-C203 SIS-203-16 SIS-203 SIS-KC203

174

DEPTH

THICKNESS

PRICE $

10" & 7-1/2" 10" & 7-1/2" 9" & 7-1/2" 9" & 7-1/2" -

16 Gauge 16 Gauge 16 Gauge 18 Gauge -

335.00 195.00 147.00 109.00 85.00

Grid: $34.00 SIS-G-203 SIS-G-C203

PART#

DEPTH

CHEF-203R 10" & 7-1/2" SIS-C203R 10" & 7-1/2" SIS-203R-16 9" & 7-1/2" SIS-203R 9" & 7-1/2" SIS-KC203 -

THICKNESS

PRICE $

16 Gauge 16 Gauge 16 Gauge 18 Gauge -

335.00 195.00 147.00 109.00 85.00

Grid: $44.00 SIS-G-204

DEPTH

THICKNESS

PRICE $

CHEF-204 SIS-C204 SIS-KC204

10" & 8" 10" & 8" -

16 Gauge 16 Gauge -

355.00 209.00 85.00

PART#

DEPTH

THICKNESS

PRICE $

CHEF-204R SIS-C204R SIS-KC204

8" & 10" 8" & 10" -

16 Gauge 16 Gauge -

355.00 209.00 85.00

Grid: $34.00 SIS-G-205

PART#

DEPTH

THICKNESS

PRICE $

SIS-205

9" & 7-1/2"

18 Gauge

139.00

Grid: $34.00 SIS-G-205

PART# SIS-205R

DEPTH

THICKNESS

PRICE $

7-1/2" & 9"

18 Gauge

139.00

Grid: $34.00 SIS-G-206

PART#

DEPTH

THICKNESS

PRICE $

SIS-206

9" & 5-3/8"

18 Gauge

145.00

Grid: $34.00 SIS-G-206

PART# SIS-206R

DEPTH

THICKNESS

PRICE $

5-3/8" & 9"

18 Gauge

145.00

POLISHING SYSTEMS

PART#

Grid: $44.00 SIS-G-204

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL PRESSED SINKS

175

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

Grid: $40.00 SIS-G-Z100

PART# CHEF-Z100 SIS-CZ100 SIS-UZ100 SIS-KZ100

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

425.00 295.00 259.00 85.00

15mm radius corners

Zero radius 90 corners

304 STAINLESS STEEL HANDMADE SINKS

Grid: $40.00 SIS-G-Z101

PART# CHEF-Z101 SIS-CZ101 SIS-UZ101 SIS-KZ101

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

333.00 205.00 165.00 85.00

Grid: $40.00 SIS-G-Z101

PART# CHEF-Z101-ZR SIS-CZ101-ZR SIS-UZ101-ZR SIS-KZ101

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

327.00 199.00 159.00 85.00

Grid: $40.00 SIS-G-Z102

PART# CHEF-Z102 SIS-CZ102 SIS-UZ102 SIS-KZ102

176

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

319.00 189.00 159.00 85.00

Grid: $40.00 SIS-G-Z102

PART# CHEF-Z102-ZR SIS-CZ102-ZR SIS-UZ102-ZR SIS-KZ102

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

313.00 183.00 153.00 85.00

PART# CHEF-Z103 SIS-CZ103 SIS-UZ103 SIS-KZ103

21’’

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

411.00 283.00 261.00 85.00

PART#

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

411.00 283.00 261.00 85.00

CHEF-Z103R SIS-CZ103R SIS-UZ103R SIS-KZ103

Grid: $40.00 SIS-G-Z105

PART# CHEF-Z105 SIS-CZ105 SIS-UZ105 SIS-KZ105

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

365.00 239.00 185.00 85.00

Grid: $40.00 SIS-G-Z105

PART#

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

359.00 233.00 179.00 85.00

CHEF-Z105-ZR SIS-CZ105-ZR SIS-UZ105-ZR SIS-KZ105

Grid: $40.00 SIS-G-Z105-30

PART# CHEF-Z105-30 SIS-CZ105-30 SIS-UZ105-30 SIS-KZ105-30

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

351.00 223.00 177.00 85.00

Zero radius 90 corners

21’’

Grid: $40.00 SIS-G-Z103R

Grid: $40.00 SIS-G-Z105-30

PART# CHEF-Z105-30ZR SIS-CZ105-30ZR SIS-UZ105-30ZR SIS-KZ105-30

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

347.00 217.00 173.00 85.00

15mm radius corners

Grid: $40.00 SIS-G-Z103

POLISHING SYSTEMS

18-3/4’’

16-3/4’’

23’’

16-3/4’’

23’’

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL HANDMADE SINKS

177

17’’

19’’

17’’

36’’

19’’

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

36’’

Grid: $40.00 SIS-G-Z105-36

34’’

PART#

34’’

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

385.00 249.00 195.00 85.00

CHEF-Z105-36 SIS-CZ105-36 SIS-UZ105-36 SIS-KZ105-36

PART# CHEF-Z105-36ZR SIS-CZ105-36ZR SIS-UZ105-36ZR SIS-KZ105

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

379.00 243.00 189.00 85.00

16-1/2’’

15mm radius corners

Zero radius 90 corners

304 STAINLESS STEEL HANDMADE SINKS

Grid: $40.00 SIS-G-Z105RIM

Grid: $40.00 SIS-G-Z105-28 Smaller Bottom

PART#

DEPTH THICKNESS PRICE $

PART#

DEPTH

CHEF-Z105RIM-ZR SIS-CZ105RIM-ZR SIS-UZ105RIM-ZR SIS-KZ105RIM-ZR

9-1/2" 9-1/2" 8-1/2" -

389.00 249.00 229.00 85.00

SIS-UZ105-28X7 SIS-UZ105-28XA5

7" 5-1/2"

6-1/4’’

26’’

PART#

DEPTH

THICKNESS

PRICE $

SIS-UZ106-ZR

4-7/8"

18 Gauge

107.00

PART#

DEPTH

THICKNESS

PRICE $

18 Gauge

125.00

DEPTH

THICKNESS

PRICE $

18 Gauge

109.00

16 Gauge 16 Gauge 18 Gauge -

THICKNESS PRICE $ 18 Gauge 18 Gauge

155.00 147.00

8-1/4’’

22’’

20’’

SIS-UZ107-ZR

PART# SIS-UZ108-ZR

178

/2” 6-1 ” /2 8-1

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL HANDMADE SINKS

PRICE $

16 Gauge

259.00

PART# SIS-CZ110-ZR

THICKNESS

PRICE $

16 Gauge

299.00

20’’

30-1/2’’

20’’

30-1/2’’

DEPTH

Zero radius 90 corners

THICKNESS

Grid: $40.00 SIS-G-Z201

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z201 SIS-CZ201 SIS-UZ201 SIS-KZ201

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

425.00 295.00 255.00 85.00

Grid: $40.00 SIS-G-Z201

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z201R SIS-CZ201R SIS-UZ201R SIS-KZ201

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

425.00 295.00 255.00 85.00

30-1/2’’

15mm radius corners

SIS-CZ109-ZR

DEPTH

30-1/2’’

Grid: $40.00 SIS-G-Z201

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z201-ZR SIS-CZ201-ZR SIS-UZ201-ZR SIS-KZ201

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

419.00 289.00 249.00 85.00

Grid: $40.00 SIS-G-Z201

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z201R-ZR SIS-CZ201R-ZR SIS-UZ201R-ZR SIS-KZ201

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

419.00 289.00 249.00 85.00

POLISHING SYSTEMS

PART#

179

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

Grid: $40.00 SIS-G-Z202

PART# CHEF-Z202 SIS-CZ202 SIS-UZ202 SIS-KZ202

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

439.00 309.00 245.00 85.00

15mm radius corners

Zero radius 90 corners

304 STAINLESS STEEL HANDMADE SINKS

Grid: $40.00 SIS-G-Z202

PART# CHEF-Z202-ZR SIS-CZ202-ZR SIS-UZ202-ZR SIS-KZ100

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

433.00 303.00 239.00 85.00

Grid: $40.00 SIS-G-Z203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z203 SIS-CZ203 SIS-UZ203 SIS-KZ203

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

439.00 309.00 245.00 85.00

Grid: $40.00 SIS-G-Z203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z203R SIS-CZ203R SIS-UZ203R SIS-KZ203

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

439.00 309.00 245.00 85.00

Grid: $40.00 SIS-G-Z203

180

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z203-ZR SIS-CZ203-ZR SIS-UZ203-ZR SIS-KZ203-ZR

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

433.00 303.00 239.00 85.00

Grid: $40.00 SIS-G-Z203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z203R-ZR SIS-CZ203R-ZR SIS-UZ203R-ZR SIS-KZ203

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

433.00 303.00 239.00 85.00

THICKNESS

PRICE $

CHEF-Z204 SIS-CZ204 SIS-UZ204 SIS-KZ204

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

467.00 339.00 265.00 85.00

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z204R SIS-CZ204R SIS-UZ204R SIS-KZ204

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

467.00 339.00 265.00 85.00

Grid: $40.00 SIS-G-Z205 17’’

Grid: $40.00 SIS-G-Z205

12’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z205 SIS-CZ205 SIS-UZ205 SIS-KZ205

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

439.00 309.00 245.00 85.00

17’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z205R SIS-CZ205R SIS-UZ205R SIS-KZ205

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

439.00 309.00 245.00 85.00

Grid: $40.00 SIS-G-Z205 17’’

Grid: $40.00 SIS-G-Z205

12’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-Z205-ZR SIS-CZ205-ZR SIS-UZ205-ZR SIS-KZ205

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

433.00 303.00 239.00 85.00

Zero radius 90 corners

DEPTH

17’’

PART#

DEPTH

CHEF-Z205R-ZR SIS-CZ205R-ZR SIS-UZ205R-ZR SIS-KZ205

8" & 10" 8" & 10" 8" & 9" -

THICKNESS PRICE $ 16 Gauge 16 Gauge 18 Gauge -

433.00 303.00 239.00 85.00

POLISHING SYSTEMS

PART#

Grid: $40.00 SIS-G-Z204

15mm radius corners

Grid: $40.00 SIS-G-Z204

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

304 STAINLESS STEEL HANDMADE SINKS

181

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

Grid: $60.00 SIS-G-AZ105

PART# CHEF-AZ105 SIS-CAZ105 SIS-UAZ105 SIS-KAZ105

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

489.00 359.00 319.00 85.00

15mm radius corners

Zero radius 90 corners

STAINLESS STEEL HANDMADE APRON FRONT

Grid: $60.00 SIS-G-AZ105

PART# CHEF-AZ105-ZR SIS-CAZ105-ZR SIS-UAZ105-ZR SIS-KAZ105

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

483.00 355.00 315.00 85.00

Grid: $60.00 SIS-G-AZ105-30

PART# CHEF-AZ105-30 SIS-CAZ105-30 SIS-UAZ105-30 SIS-KAZ105-30

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

479.00 345.00 323.00 85.00

Grid: $60.00 SIS-G-AZ105-30

PART# CHEF-AZ105-30ZR SIS-CAZ105-30ZR SIS-UAZ105-30ZR SIS-KAZ105-30

DEPTH 10" 10" 9" -

THICKNESS PRICE $ 16 Gauge 16 Gauge 18 Gauge -

Grid: $60.00 SIS-G-AZ105-36

PART# CHEF-AZ105-36 SIS-CAZ105-36 SIS-UAZ105-36 SIS-KAZ105-36

182

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

509.00 379.00 345.00 85.00

475.00 339.00 317.00 85.00

Grid: $60.00 SIS-G-AZ105-36

PART# CHEF-AZ105-36ZR SIS-CAZ105-36ZR SIS-UAZ105-36ZR SIS-KAZ105-36

DEPTH 10" 10" 9" -

THICKNESS PRICE $ 16 Gauge 16 Gauge 18 Gauge -

503.00 373.00 339.00 85.00

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

533.00 407.00 355.00 85.00

PART# CHEF-AZ202-ZR SIS-CAZ202-ZR SIS-UAZ202-ZR SIS-KAZ202

DEPTH

THICKNESS

PRICE $

10" 10" 9" -

16 Gauge 16 Gauge 18 Gauge -

527.00 403.00 349.00 85.00

Grid: $40.00 SIS-G-AZ203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ203 SIS-CAZ203 SIS-UAZ203 SIS-KAZ203

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

533.00 407.00 355.00 85.00

Grid: $40.00 SIS-G-AZ203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ203R SIS-CAZ203R SIS-UAZ203R SIS-KAZ203

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

533.00 407.00 355.00 85.00

Grid: $40.00 SIS-G-AZ203

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ203-ZR SIS-CAZ203-ZR SIS-UAZ203-ZR SIS-KAZ203

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

527.00 403.00 349.00 85.00

Zero radius 90 corners

CHEF-AZ202 SIS-CAZ202 SIS-UAZ202 SIS-KAZ202

DEPTH

Grid: $40.00 SIS-G-AZ203

PART#

DEPTH

CHEF-AZ203R-ZR SIS-CAZ203R-ZR SIS-UAZ203R-ZR SIS-KAZ203

8" & 10" 8" & 10" 8" & 9" -

THICKNESS PRICE $ 16 Gauge 16 Gauge 18 Gauge -

527.00 403.00 349.00 85.00

15mm radius corners

PART#

Grid: $60.00 SIS-G-AZ202

POLISHING SYSTEMS

Grid: $60.00 SIS-G-AZ202

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

STAINLESS STEEL HANDMADE APRON FRONT

183

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

Grid: $60.00 SIS-G-AZ205 17-3/8’’

Grid: $60.00 SIS-G-AZ205

11-5/8’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ205 SIS-CAZ205 SIS-UAZ205 SIS-KAZ205

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

545.00 415.00 357.00 85.00

15mm radius corners

Zero radius 90 corners

STAINLESS STEEL HANDMADE APRON FRONT

17-3/8’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ205R SIS-CAZ205R SIS-UAZ205R SIS-KAZ205

8" & 10" 8" & 10" 8" & 9" -

16 Gauge 16 Gauge 18 Gauge -

545.00 415.00 357.00 85.00

Grid: $60.00 SIS-G-AZ205 17-3/8’’

Grid: $60.00 SIS-G-AZ205

11-5/8’’

PART#

DEPTH

THICKNESS

PRICE $

CHEF-AZ205-ZR SIS-CAZ205-ZR SIS-UAZ205-ZR SIS-KAZ205

10" & 8" 10" & 8" 9" & 8" -

16 Gauge 16 Gauge 18 Gauge -

539.00 409.00 351.00 85.00

17-3/8’’

PART#

DEPTH

CHEF-AZ205R-ZR SIS-CAZ205R-ZR SIS-UAZ205R-ZR SIS-KAZ205

8" & 10" 8" & 10" 8" & 9" -

THICKNESS PRICE $ 16 Gauge 16 Gauge 18 Gauge -

539.00 409.00 351.00 85.00

CERAMIC SINKS

184

PART#

DEPTH

COLOR

PRICE $

SIS-1512W SIS-1512B SIS-1512BK

7-1/2" 7-1/2" 7-1/2"

White Biscuit Black

20.00 20.00 25.00

PART#

DEPTH

COLOR

PRICE $

SIS-1613W SIS-1613B

7-3/4" 7-3/4"

White Biscuit

20.00 20.00

PRICE $

8" 8" 8"

White Biscuit Black

20.00 20.00 25.00

PART#

DEPTH

COLOR

PRICE $

SIS-1813W SIS-1813B SIS-1813BK

7-1/2" 7-1/2" 7-1/2"

White Biscuit Black

35.00 35.00 40.00

PART#

DEPTH

COLOR

PRICE $

White

PART#

DEPTH

COLOR

PRICE $

7" 7"

White Biscuit

35.00 35.00

DEPTH

COLOR

PRICE $

7" 7"

White Biscuit

45.00 45.00

PART#

DEPTH

COLOR

PRICE $

SIS-2216W SIS-2216B

7-3/4" 7-3/4"

White Biscuit

35.00 35.00

PART#

DEPTH

COLOR

PRICE $

SIS-2017W SIS-2017B

8-1/4" 8-1/4"

White Biscuit

30.00 30.00

SIS-1611W SIS-1611B

14’’

SIS-1714W SIS-1714B SIS-1714BK

SIS-1811W

35.00

PART# SIS-1812W SIS-1812B

K Kit (1 strainer, 1 salad bowl, 1 grid set, 1 glass cutting board)

COLOR

Zero radius 90 corners

DEPTH

12’’

PART#

15mm radius corners

13”

11”

18”

POLISHING SYSTEMS

CERAMIC SINKS

185

VESSEL SINKS SIS-CV01W

SIS-CV02W

SIS-CV03W

SIS-CV04W

SIS-CV05W

SIS-CV06W

SIS-CV07W

SIS-CV08W

SIS-CV10W

SIS-CV11W

SIS-CV12W

Top mount

SIS-CV09W

SINK ACCESSORIES

Top View

186

POLISHING SYSTEMS

SINKS ACCESSORIES

187

188

INDEX 31 3 Step Dry Pads 29 3 Step Engineered Stone 28-29 3 Step Wet Pads 64 3 Wheel Dollies 64 4 Wheel Dollies 136 511 Impregnator 136 511 Porous Plus 156-157 5X Powder 69, 78, 82 90 Degree Clamps 61-62 A-Frames 60-61 Abaco Accessories 70-71 Abaco Booms 64-66 Abaco Carts and Dollies 69-70 Abaco Clamps 70 Abaco Dumpster 66 Abaco Elevating Cart 57, 59, 60 Abaco Lifters 71 Abaco Locking Set 67-68 Abaco Racks 59-60 Abaco Scissor Clamps 65 Abaco Slab Buggy 58-59 Abaco Spreader Bar 63 Abaco Tables 38 Abrasive Discs 159 Acetone Adapters 16,21,33,42,48,51,82,122 125-133 Adhesives 40 Ageing Products 107-109 Air Polishers 110 Air Circular Saw 187 Air Switch 108 Air Tool Lubricant 107-110 Air Tools 132-133 Akemi Akepox 130-131 Akemi Color Bond 143 Akemi Darkener Plus 144 Akemi Darkener Super 132 Akemi Everclear 145 Akemi Impregnation Remover 127,129 Akemi Marble Fillers 131 Akemi MS76 139 Akemi Nano Effect 125 Akemi Platinum 145 Akemi Spider Black 139 Akemi Stone Impregnation 144 Akemi Transformer 134 Alex Plus Caulk 109 Alpha Air-300 109 Alpha AIR-680 30 Alpha Ceramica Dry Pads 26 Alpha Ceramica Edge 25 Alpha Ceramica EX 24 Alpha Ceramica Metal 26 Alpha Ceramica Resin 29 Alpha Ceramica TF 24 Alpha Ceramica Vitriﬁed 09-11 Alpha Contour Blade 114 Alpha Countertop Trim Kit 44 Alpha Dry Core Bits 06 Alpha Eclipse II

Alpha Eco Guards Alpha Katana Alpha Knock Out Alpha Libero Alpha Numero Uno Alpha Plus Alpha Porcellana Alpha Proﬁling Bits Alpha Proﬁling Tools Alpha PSC-150 Alpha PVA MS Alpha PVA QC Alpha Quad Alpha Silencer III Alpha Spike Discs Alpha Summit Alpha Trim Master Alpha Turboshine Alpha Twincur CFP Alpha Twincur EB Alpha Twincur ES Alpha Twincur Final Buff Alpha Twincur GEM Alpha Twincur Resin Bond Alpha Typhoon Alpha Vetro Alpha Vexcel Disc Alpha Vortex Aluminum Cup Wheels Anchor Bits Anchoring System Anchors Antique Brushes Aprons Aqua Jaw Auto Edge Tooling Back Support Backer Pads Bar Clamps Bar Keeper's Friend Barranca Polisher Beats The Nail Beaver 101 Bellinzoni 5X Bellinzoni Astra Bellinzoni Epox 2000 Bellinzoni Epox 5000 Bellinzoni Eureka Bellinzoni GTX Bellinzoni Idea Black Bellinzoni Idea Dark Bellinzoni Idea Gold Bellinzoni Idea Quarzo Bellinzoni Idea Stoneager Bellinzoni Idea Tropical Bellinzoni Idea XC Bellinzoni LEM-3 Bellinzoni Mangiamacchia Bellinzoni Marmo Care System Bellinzoni Polyester Mastice

99 16 15 8 9 5 13 55 55 110 31 31 5 21-22 52 39 15 32 34 38 36 36 34 36 23 14,17 52 16 49 47 85 85 44 95 78 32-38 96 42-43 83 150 109 135 119 156 128 129 129 157 150 145 143 139 146 144 144 145 147 150 153 127

143 Bellinzoni Rapid Color 155 Bellinzoni RR/1 150 Bellinzoni Rust Remover 157 Bellinzoni Super Crystal 156 Bellinzoni Super Lux Bellinzoni Ultra Stripper Cleaner 148 150 Bellinzoni VIP 10 155 Bellinzoni Wax 34,36 Beveled Edge Pads 123 Blue Ripper Miter Master 113 Blue Ripper Saws 67 Booms 95 Boots 71 Bow Shackle 87 Breakaway Plastic Wedge 17-23 Bridge Saw Blades 23 B. Saw Blades for Concrete 22 B. Saw Blades for Cryst. Glass 22 B. Saw Blades for Glass 17-21 B. Saw Blades for Granite 22-23 B. Saw Blades for Marble 22 B. Saw Blades for Porcelain 114-115 Bridge Saw Machines 98 Bufﬁng Pads 136 BulletProof Sealer 33,35,38 Bullnose Edging 68 Bundle Rack 88 Burn in Sticks 48 Burr Set 35 C-Frame Tooling 71 Cable Connect Sling 69,74 Carry clamps 64-66 Carts and Dollies 134-135 Caulks and Sealants 184-185 Ceramic Sinks 129 Chemorset A & B 89 China Markers 85 Cinclips 112-114 Circular Saws 69,70,82,83 Clamps 146-154 Cleaners 51 Cluster Cup Wheels 48 CNC Core Bits 51-52 Coat Removal Discs 128 Color Pigments 143 Colorants 167 Colored Strainers 87 Composite Shims 12-14,17 Continuous Rim Blades 9-11 Contour Blades 10 Contour Blades for Granite 11 Contour Blades for Marble 28 Convex Pads 24 Copper Pads 86 Corbels 98 Cotton Bufﬁng Pads 97 Countertop Covers 32,34 Crystallized Glass Polishing 49-52 Cup Wheels 89 Cups

132 Cyanoacrylate Instal Glue 44,46-48 Cyclone Core Bits 30 Cyclone Dry Pads 30 Cyclone Dryﬂex 33 Cyclone Edge Polishing Wheels 8 Cyclone Electroplated Blades 14 Cyclone Glass Blades 17 Cyclone LHP Blade 13 Cyclone Mesh Thin Turbo 107 Cyclone MVP Polisher 19 Cyclone S Bridge Saw Blades 5 Cyclone S Turbo Blade 33-34 Cyclone Straight Edge Pads 51 Cyclone Super Cluster 29 Cyclone Trifecto 5,6 Cyclone Turbo Blades 26 Cyclone Ultra Wet Pads 24 Cyclone V2 Grinders 27 Cyclone Wet Pads 134-135 DAP Caulks and Sealants 143 Darkener Plus 143 Darkener Plus Inks 144 Darkener Super 152 DeepKlenz Cleaner 124 Dehydrator 30 Dekton Recom. Dry Pads 34 Dekton Recom. Edge Pads 159 Denatured Alcohol 156 Dia-Glo 48 Diamond Burr Set 40 Diamond Hand Pads 111 Die Grinders 84,88 Dishwasher Mount 43 Diskits 68 Display Rack 47 Drill Bits 44-45 Dry Core Bits 89 Dry Markers 30-31 Dry Polishing Pads 66 Drywall Cart 70 Dumpster 162-167 Duragranit Sinks 99,108 Dust Collection Equipment 135 Dynaﬂex 230 94 Earmuffs 94 Earplugs 33-38 Edge Polishing Systems 119-123 Edging Machine 111 Electric Dry Polishers 106 Electric Wet Polishers 8,9,11 Electroplated Blades 48 Electroplated Burr Set 46 Electroplated Core Bits 51 Electroplated Cup Wheel 47 Electroplated Drill Bits 32 Electroplated Pads 66,73 Elevating Cart 28-29 Engineered Stone Pads 142-146 Enhancers 154 Etch and Water Remover

189

INDEX Extension Cords 99 EZ Dishwasher Bracket 84 EZ Sink Bracket 84 Fabrication Stand 63 Felt Pads 98 Fiberglass Mesh 97 Fiberglass Rods 86 Fiberglass Roller Frame 87 Filter/Regulator 109 Finger Bits 48 Forklift Booms 67 Forklift Extensions 70 Garbage Disposal 41 Glass Blades 14,17 Glass Tile & Shower Sealer 140 Glasses 93-94 Gloss Meter 97 Gloves 91 Glue Sticks 88 Go Clips 85 Grinders 101,103-105 Grinding Discs 52 Grinding Drums 53 Grinding Stones 53 Guide Rail System 112-113 Gundlach Tile Bits 47 Half Gas Core Bits 48 Half-Bullnose Wheels 55 Handmade Sinks 176-184 Hand Pads 40 Hard Felt Bufﬁng Pad 98 Hardener 128 Heavy Duty Cleaner 154 Horseshoe Shims 87 Hot Burn Sticks 88 Hot Melt Glue Sticks 88 Hot Stuff 132 Hurricane 3 Step 28 Hurricane Core Bits 45 Hurricane Dry Pads 31 Hurricane Turbo Blades 7 Hybrid Adhesive 125 Hybrid Polishing Pads 24 Impregnator Remover 145 Impregnator Pro 136 Impregnators and Sealers 136-141 Incremental Cutting Tips 48 Instal.&Shop Supplies 82-99 Instant Glue 132 Italian Craftsman 155 KBond Color Pigments 128 KBond Elite 125 KBond PolyEpoxy 125 KBond Quick Set 128 Knee Guards 96 Lacquer Thinner 159 Lam Clamp 74 Lamination Clamps 70,74,82 Latex Gloves 91 LC Brackets 84 Leveling Shims 87

190

57,59,60 Lifters 71 Locking Set 82 Low-Proﬁle Bumper Accessory 108 Lubricant Oil 100-101 Makita Combo Kits 31 Mako Dry Pads 150 Mangiamacchia 8,9,11,22,23 Marble Blades 46 Marble Core Bits 31 Marble Edge Polishing System 156-157 Marble Polishing Powder 89 Markers 97 Masking Tape 92-93 Masks 88 Measuring Tape 74 Mega Jaw 12-13 Mesh Thin Turbo Blades 35 Metal Bond Cup Wheels 86 Metal Brackets 23 Milling Wheels 159 Mineral Spirits 123 Miter Master 82 Miter-It 89 Mixing Cups 15-16 Multi Cutter Blade 132 NCF Accelerator 82 No-Spin Backer Pad 47 Non-Core Bits 33 NSI Backers 122 NSI Rapid Z-Cut 122 NSI Seam Phantom 122 NSI Sink Bull 33 NSI SL3 Wheels 87 NSI Twist Shims 150 Oil Stain Removers 72-82 Omni Cubed Products 95 Over the Shoe Boots 86 Overhang Support Brackets 154 Oxalic Acid 89 Paint Markers 97 Paper Masking Tape 128 Paste Hardener 9 Pearl Electroplated Blades 12 Pearl P2 Pro V 9 Pearl P3 Marble Blades 7 Pearl P3 Turbo Blades 44 Pearl P5 Core Bits 20-21 Pearl P5 Reactor Pro Blades 18 Pearl P5 Shadow 5 Pearl P5 Turbo Blade 89 Pencils 127 Penetrating 88 Plywood 107,108 Pneumatic Grinders 107,110 Pneumatic Tools 106,107,109 Polishers 158 Polishing Bars 41 Polishing Drums 156-157 Polishing Powders 96 Polo Rags 125-127 Polyesters

88 Polypropylene Template 139 Porc. & Ceramic Tile Sealer 9,12,13,22 Porcelain Blades 6,11-13,16,23 Porcelain Tile Bits 16-17 Portable Rail Saw Blades 149,151 Poultice Products 134-135 Premier Silicone 24 Preparation Stage Pads 123 Pro Anchor Machine 72 Pro Cart AT1 2014 72 Pro Cart AT2 2014 72 Pro-Dolly Hd1 73 Pro-Dolly Hd2 73 Pro-Lift Automatic 63 Processing Table 114-118 Professional Saws 54-56 Proﬁling Tools 97 Protection Film 90 Putty Knives 16 Quad Adapter 152-153 Quartz Care Systems Quartz Countertop Cleaner 151-153 140 Quartz Countertop Sealer 67-68 Racks 96 Rags 95 Rain Coats 122 Rapid Z-Cut 69 Ratchet Seam Setters 90 Razor Blades 21 Reducing Arbor 68 Remnant Rack 50-52 Resin Filled Cup Wheels 54 Resin Sticks 93 Respirators 146 Revitalizer 146 Revitalizer Cleaner 67 Rhino Rack 131 Rodding Adhesive 14-15 Rodding Blades 86 Rodding Material 54-56 Router Bits 119-120 Router Machine 42 Rubbing Stones 116-118 Rubi Saws 114-115 Rye Corp Saws 93-94 Safety Glasses 91 Safety Gloves 7 Samurai Turbo Blades 111 Sanders 41-42 Sandpaper 132 Satellite City Glue Saw Blades for Ceramic Tile 12,13,23 59-60 Scissor Clamps 90 Scrapers 32,35,37 Scratch Removal System 48 Screw on Tip 85 Screws 69,77 Seam Setter 16 Segmented Blades 65 Self Locking Dollies 87 Shims

Silent Core Adapter 21 Silicone Carbide 41,53 Single Head Polishing Pads 34,36 Single Speed Grinders 105 Sink Bull 122 Sink Clips 85 Sink Hole Saver 75-76 Sink Hole Support System 70,75 Sink Locks 68 Sink Mounting Hardware 84,85 Sink Setters 84 Sinkits 84 Sinks 162-186 SL3 Backers 33 SL3 Wheels 33,51,122 Slab Buggy 65 Slab Cart 66 Slab Dollies 64 Slab Edge Guards 71 Slab Rack 67,68 Slabmaster Tooling 39 Sleeves 95 Snail Lock Adapters 42 Specialty Blades 15-16 Specialty Core Bits 47-48 Specialty Polishing System 31-40 Sponge 98 Spray Bottle 89 58,59 Spreader Bar 89 Squeegees 89 Staedtler Markers 149-150 Stainless Steel Cleaner 88 Stainless Steel Measuring Tape 168-184 Stainless Steel Sinks 77-81 Stealth Seamer 49 Steel Cup Wheels 86 Steel Rods 95 Steel Toe Boots 98 Steel Wool 89 Stir Sticks 110,114 Stone Cutter Stone Lifters 57,59,60 Stone Platinum Core Bits 44 Stone Platinum Turbo Blades 4 Stone Platinum Wet Pads 26 Stone Plus Contour Blade 10 Stone Plus Dry Pads 30 Stone Plus Electroplated Blades 8 Stone Plus Turbo Blades 6 Stone Plus Wet Pads 27 Stone Router 119-120 Stone Turbo Blades 7 Stonetech DeepKlenz Cleaner 152 Stonetech Revitalizer 146 Stonetech Warranty Kit 137 Storm Turbo Blades 7 Straight Edge Tooling 33-36 Strainers 167-187 Stretch Belt 96 Studs 85 83 Suction Cups

INDEX Suction Drilling Rings Super Edge Diamond Discs Super Met-al Markers Support Belt Support Brackets Surface Polishing Discs Surface Polishing Machine Swivel Shackle T-31 Anchor Bits T-Anchors Tables Tapered Plastic Wedges Tape & Drape Tapes Template Material Texture Finish Pads Thin Wall Core Bits

48 35 89 96 86 39 118 71 47 85 63 87 97 97 88 29 45

71 Tie Down Straps 6,9,11-13,16,23 Tile Blades 89 Tongue Depressors 144 Transformer Enhancer 48 Trimmer Bits 14-15 Tuck Point Blades 4-7 Turbo Blades 87 Twist Shims 85 U-Mounts 18 Universe Bridge Saw Blades 184-185 Universe Ceramic Sinks 187 Universe Series Accessories 186 Universe Series Vessel Sinks 5 Universe Turbo Blade 90 Utility Knives 47 Vacuum Brazed Bits 51 Vacuum Brazed Cup Wheels

53 Vacuum Brazed Drums 24,51 Vacuum Brazed Grinders 54-55 Vacuum Brazed Proﬁlers 57 Vacuum Lifters 83 Vacuum Suction Cups Variable Speed Grinders 101,103,104 186 Vessel Sinks 49 Victor Cup Wheels 90 Wall Stripper 137 Warranty Kit 127 Waterclear Fillers 95 Waterproof Jacket 6 Waved Blades 155-158 Wax and Polishers 155 Waxes 71 Wedgee 71,87 Wedges

Weg-Fab Wedge 87 Wet Circular Saw 112-114 Wet Core Bits 46 Wet Polishers 106,107,109 Wet Polishing Pads 25-27 Wheel Dresser Replacement 53 Wheel Dresser Tool 53 Winch Cart 66 Wood Shims 87 Wood Template 88 Working Table 63 Yellow Sponge 98 Zenesis Blades 20 Zero Tolerance Wheels 53

IMAGE POLICY Use of this catalog’s images requires prior written authorization from their manufactures, due to copyright issues. LEGAL DISCLAIMER All technical data information provided in this publication is done as a public service to our customers, and customers of our products. Prices and specifications all products are subject to change without notice or obligation. We may also change or discontinue models of its products without notice or obligation. While we endeavor to provide you with accurate information and descriptions of its products, accuracy and completeness cannot be guaranteed. We are not responsible for, nor does it have any liability for any mistakes or typographical errors, including liability for incidental, consequential, or special damages. All products should be inspected and measured promptly upon delivery and certainly before any improvements or alterations are done in anticipation of or preparation for installation. We assume no liability for use of such information or for any damages incurred through its use or application. Nothing contained in this publication is to be constructed as contractual or providing any form of warranty or representation on our part. WE MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, AS TO THE INFORMATION CONTAINED HEREIN OR THE PRODUCTS DESCRIBED HEREIN.

191

TERMS AND CONDITIONS

194

PRODUCT RECEIVING & ASSISTANCE POLICY Immediately upon receipt of a any product, the customer is required to do a visual inspection of the carton/pallet. The customer must then verify the quantities of products on the PACKING LIST/INVOICE and the carrier’s paperwork vs. actual items received. A proper/authorized signature and date is required on carrier paperwork and/or delivery receipt. The signature must be legible. If the signature is not legible, the customer’s representative must print their name. How to Handle Exceptions or Discrepancies at Time of Product Delivery a) USP / USPS / FedEx Ground If the carton packaging appears to have visible damage (i.e., ripped, holes, large dents, open carton, visible water damage, etc.), we strongly recommends that the customer conducts an immediate inspection of the product inside the carton while the carrier’s driver is present, to verify the damage. If the contents are damaged, the damage must be indicated/noted on the carrier’s paperwork. Please REFUSE the package always when the item damaged is the only item on the package/box. DO NOT REFUSE the shipment if damages are partial. All DuraGranit sinks must be inspected at the time of delivery while the carrier’s driver is present. The customer must contact us by e-mail within 3 days of the delivery date. b) Freight Companies (Saia, Southeastern, FedEx Freight, others) If the pallet(s) appears to have visible damage (i.e., ripped, holes, large dents, open carton, visible water damage, etc.), we strongly recommend that the customer conducts an immediate inspection of the product while the carrier’s driver is present, to verify the damage. All DuraGranit sinks must be inspected at the time of delivery while the carrier’s driver is present. If the contents are damaged, the damages must be indicated/noted on the carrier’s paperwork. Please DO NOT REFUSE the shipment if damages are partial. Please take pictures of the damages, note the damages on the shipper’s release form and contact us by e-mail within 3 days of the delivery date. If the contents cannot be inspected immediately, a notation on the carrier’s paperwork must state “carton damaged” “subject to inspection” and a detailed, specific list of the type of damages on the outside of the carton must be noted on the delivery receipt. Contents must be inspected within 3 days of the delivery date and actual damages reported to the carrier. SPECIAL NOTE: The customer is not justified in refusing a damaged shipment unless the damage has made the goods worthless. In cases of partial damage or loss, the customer should accept the entire shipment and notify us so we can start the return/credit process. Carton Shortages Against Delivery Receipt When a delivery is made and the carrier does not have the number of cartons on the shipping information, the customer must sign the carrier's paperwork as “short; indicate # of cartons short.” The customer must then notify us by e-mail immediately. Order Cancellations After Unit Has Shipped When an order has been cancelled after the unit(s) has shipped, the customer must refuse the shipment. The customer must sign the carrier paperwork as “carton refused, order cancelled.” The customer must notify us by e-mail. The customer is responsible for freight charges and a 25% restocking fee if the order is cancelled after it has shipped from us. Custom/Special orders cannot be cancelled after being shipped. Change of Destination or Re-consignment When a shipment destination has been changed or re-consigned, the customer must refuse the shipment and sign the carrier paperwork as “carton refused, wrong delivery location.” The Dealer must notify us immediately by e-mail with the correct delivery address. The customer is responsible for all additional freight charges if incorrect address information came from the customer. The above policies must be followed or the customer will be responsible for shipping charges and other fees that may be incurred. Except as stated above, customers who refuse delivery of ordered products without prior approval will be responsible for all freight charges and a 25% re-stocking charge.

RETURN POLICY A Return Merchandise Authorization (RMA#) is required for all product returns. A RMA# and shipping instructions can be obtained by contacting us via e-mail. No returns will be accepted without a RMA#. A 25% restock fee will be applied to all returned goods on stock material (non-defective products). All returns must be shipped back in original, unopened packaging in order to receive credit. No returns authorized after 90 days from date of purchase. No returns will be accepted or credit issued on used products, unless they are proven to be defective. All claims of shortages must be reported to customer service within 48 hours of receipt. No returns will be authorized on Hazmat products, chemicals, or adhesives. No returns will be authorized on special order items. Customers must pay shipping charges on all returns. Upon receipt and inspection of the product return, we will issue a refund on shipping charges if it is proven that there was a shipping error or the product was defective. Returns are limited to 10% of the previous 12 months net purchase.

Stone Tools & More does not guarantee the accuracy or completeness of the information provided in this catalog. Stone Tools & More reserves the right to correct any errors, inaccuracies or omissions and to change or update information at any time without prior notice (including after you have submitted your order). Please note that such errors, inaccuracies or omissions may relate to product description, pricing and availability. Photos may vary. Pricing and shipping&handling rates are subject to change without notice. We apologize for any inconvenience this may cause you.