STORAGE DESIGN LIMITED - In Charge Lockers 2012
In Charge Laptop TM
Charging Units SECU RE CHA RG ING SOLU TION SG Our range of Laptop Charging Units offer a secure way to protect and charge laptops in unsecured areas. Designed for use in a wide range of educational environments, these lockers deter the risk of opportunist theft. n All doors have an all-round reinforcing edge, spot welded at each corner to enhance strength and rigidity. n Steel three-knuckle hinges are welded to the door and riveted to the frame to give added strength and allow for easy replacement of damaged doors. n Colours are applied electro-statically as an epoxy polyester powder coat, then baked to provide a high quality, durable finish. All doors are independently earthed to the locker body.
One side of the locker and the doors are perforated to help prevent heat build-up during charging. Choice of locks to suit different applications. See over page. n Single socket for each compartment. Each shelf has an additional front-to-rear reinforcing box section to increase strength.
n Power lead plugs into the In ChargeTM Locker enabling easy replacement of the lead if damaged.
n Sloping tops are available as a factory-fitted option. These prevent litter being left on locker tops and makes their cleaning easier.
Each compartment is fitted with a standard UK threepin socket.
Power lead is supplied with fitted RCD plug. Supply Voltage 230v.
STORAGE DESIGN LTD TEL:01446 772614 info@storage-design.co.uk www.storage-design.co.uk
STORAGE DESIGN LIMITED - In Charge Lockers 2012
In Charge Laptop Charging Units TM
These purpose-designed locker units provide a safe sanctuary for laptops and real peace of mind for users. Height - 900 or 1800mm n Half height locker accommodates five laptops.
Width mm 450
n Single door locker version allows access to all compartments under one key.
Depth mm 450
n Doors and side panel perforated for ventilation to prevent heat build-up during charging. n Key-operated cam locks with two keys are supplied as standard. The cam locks through the door and frame for added security. Hasp & Staple Padlock fitting also available (see below). n Choice of door colours (see below). n Single UK three-pin socket in each compartment. n Current consumption for each socket. 1-door (10-socket)
1.3 amp
5-door (5-socket)
2.6 amp
10-door (10-socket)
1.3 amp
n Also available, optional full-height protective steel channel kit to cover all locks. Requires padlock.
Single-Door Locker
Ten-Door Locker
Five-Door Locker
BioCote® Paint Finish
Lock Options
Epoxy-polyester powder coat colours with BioCote® protec-
Standard Body Colour
Laptop Charging Unit
Standard Deadlock
Hasp & Staple Padlock Fitting
This simple and economical cam lock provides user access with a small, easily replaced key. The lock is supplied with two keys and a master key is available.
Transfers responsibility for locking to the user. The user is required to secure the locker with a padlock (not supplied). This system provides flexibility at the loss of some control over allocation of lockers.
l
l
Light Grey (RAL 7035)
Standard Door Colours
Light Grey (RAL 7035)
Red (RAL 3020)
Carmine Red (RAL 3002)
Yellow (RAL 1003)
Blue (RAL 5002)
Green (RAL 6001)
Dark Grey (BS 00A11)
Electric Blue (BS 20 E 51)
CE Conformity CE marking is a declaration by Moresecure that In ChargeTM Lockers meet all the appropriate provisions of the relevant legislation implementing certain European Directives. The initials ‘CE’ ultimately mean that Moresecure satisfy the applicable European Directive(s).
Extended range of door colours available, ask for details.
STORAGE DESIGN LIMITED Primrose Hill Cowbridge South Wales CF71 7DU Tel: 01446 772614 Fax: 01446 774770 email: info@storage-design.co.uk web 1: www.storage-design.co.uk web 2: www.storage-design.ltd.uk STORAGE DESIGN LTD TEL:01446 772614 info@storage-design.co.uk www.storage-design.co.uk
MS/ICLaptoppdf/Nov11
For further information on Moresecure products, please contact your local distributor: