452 200 low product catalogue 2014 by Straumann AUNZ

Product Catalog 2014

Note A list of abbreviations can be found on the reverse of this fold-out page. This list of abbreviations gives an overview of implants, platforms, materials and packaging units.

LIST OF ABBREVIATIONS

-04 Pack of 4 ABS Acrylonitrile butadiene styrene Al Aluminum BL Bone Level LDPE Low-density polyethylene MO 0 Medium Opacity 0 MO 1 Medium Opacity 1 NC Narrow CrossFit 速 = implant diameter 3.3 mm, BL implants NN Narrow Neck = implant shoulder diameter 3.5 mm, SP implants NNC Narrow Neck CrossFit 速 = implant shoulder diameter 3.5 mm, SP implants PA Polyamide PC Polycarbonate PEEK Polyetheretherketone PMMA Polymethylmethacrylate POM Polyoxymethylene PPS Polyphenylene sulfide PS Polystyrene PSU Polysulfone Regular CrossFit 速 = implant diameter 4.1 and 4.8 mm, BL implants RC RN Regular Neck = implant shoulder diameter 4.8 mm, S/SP/TE implants S Standard SCS Screw Carrying System SP Standard Plus TAN Titanium-aluminum-niobium alloy TAV Titanium-aluminum-vanadium alloy TE Tapered Effect Ti Titanium TiN Titanium nitride TiZr Titanium-zirconium alloy (Roxolid 速) TS Transversal screw retention V2 Pack of 2 V4 Pack of 4 V20 Pack of 20 WN Wide Neck = implant shoulder diameter 6.5 mm, S/SP/TE implants ZrO2 Zirconium dioxide

CONTENTS GENERAL

PAGE

Introduction

The Straumann Guarantee

Important Guidelines

Explanation of coding and types

Contacts

REGENERATION Straumann® Emdogain® and Straumann® PrefGel®

Straumann® BoneCeramic™

Straumann® Bone Block Fixation 1.5 mm

Implant Maintenance

SURGERY Implants ● Standard Implants ● Standard Plus Implants ● Tapered Effect Implants ● Bone Level Implants ● Straumann ® PURE Ceramic Implants ● TempImplants

20 25 32 36 42 46

Surgical instruments ● Surgical planning aids ● Implant bed preparation instruments ● Auxiliary instruments ● Surgical cassette ● Osteotomes ● Explantation

47 49 57 59 60 63

Straumann® Guided Surgery ● gonyX™ ● Guided Surgery instruments ● Auxiliary instruments ● Guided Surgery Cassette

66 68 72 74

PROSTHETICS Cassettes, inserts and storage system

Prosthetic instruments

Straumann®

Prosthetics for Standard, Standard Plus and Tapered Effect Implants ● Prosthetic planning aids ● Straumann ® CARES ® Implant-borne prosthetics ● Crowns and bridges ● Hybrid dentures

79 79 83 88 120

Prosthetics for Straumann® Bone Level Implants ● Prosthetic planning aids ● Straumann ® CARES ® Implant-borne prosthetics ● Crowns and bridges ● Hybrid dentures

141 141 148 152 185

Straumann® Classic

205

SERVICE Service materials

216

INDEX

PAGE

Numerical index

220

Alphabetical index

239

GENERAL INTRODUCTION

INTRODUCTION

At Straumann we are committed to providing high-quality and innovative solutions for dental professionals, as simply and efficiently as possible. This principle extends to our Product Catalog, which has been updated to help you locate the most appropriate products for your needs more easily. You will find the contents of this catalog listed by procedure – allowing you to select the most suitable products according to the nature of the case – as well as indexed by article number and name. Straumann products receive the support of our scientific partners, the International Team for Implantology. We focus on the primary areas of implant and restorative dentistry and oral tissue regeneration and offer a comprehensive range of solutions in each of these areas: Regeneration – materials and components devised to help restore naturally functioning teeth. Surgery – implants, instruments and aids developed for those indications where a surgical intervention is required. Prosthetics – abutments, copings and other prosthetic components designed for completion of a high-quality and functional procedure. Although flexibility in treatment options is important to us, we feel that true Straumann quality can only be guaranteed when you choose original Straumann products at every stage of the procedure. We hope you find this catalog both interesting and informative. Please do not hesitate to contact your local Straumann representative for further information or visit our eShop for 24/7 access to the full product range. You can access the eShop portal most relevant to your needs via your local Straumann website (i.e. www.straumann.ch for customers in Switzerland, www.straumann.de for Germany, etc.). Then simply click on the ‘eShop’ tab within the menu at the top of the screen to be linked through to the shop.

GENERAL PRODUCT NEWS IN THIS PRODUCT CATALOG

PRODUCT NEWS IN THIS PRODUCT CATALOG

A whole new revised Roxolid® SLActive® and SLA® Implant portfolio: Roxolid® SLActive® Implants with the new Loxim™ Transfer Piece Roxolid ® SLA® Implants with the new Loxim™ Transfer Piece In Q2 2014, Straumann will enter the world of ceramic implants and presents its new Straumann® PURE Ceramic

Q 2 2014

Implants. Straumann® PURE Ceramic Implants Regular Diameter

Roxolid® Implants with Loxim™ Transfer Piece

(RD) Ø 4.1 mm, monotype

Straumann® PURE Ceramic Implant

Straumann® PURE Ceramic Implants Narrow Diameter (ND) Ø 3.3 mm, monotype

Q 2 2014

Within our prosthetic portfolio, Straumann will provide a strong foundation supporting ample flexibility with the Straumann® Variobase™ Abutment, provide a whole new range of possibilities offering new screw-retained straight and angled abutments on Straumann® Bone Level Implants (Q2 2014), focus on perfection from any angle with the Straumann

Straumann® Variobase™ Abutment

Screw-retained straight and angled abutments

Straumann® SFI-Anchor®

Vita CAD-Temp® Temporary Abutment

SFI-Anchor®, and offer a complete coverage of all Straumann restorative platforms with the Vita CAD-Temp® Temporary Abutments now made of PMMA material for direct veneering. The star within our regenerative portfolio will remain Straumann® Emdogain® 015 as a cost-effective treatment option for your patients.

Straumann® Emdogain® 015

GENERAL THE STRAUMANN GUARANTEE

THE STRAUMANN GUARANTEE

The new Straumann Guarantee applies if Straumann products are used in combination with other original Straumann products. Provided that the conditions of the Straumann Guarantee are fulfilled, the following guarantee periods are covered: 5-year guarantee period: for ceramic restorations Replacement with an equivalent ceramic abutment (attached to a Straumann Implant) or with an equivalent ceramic crown, coping or bridge restoration (for tooth and implantsupported restorations). 10-year guarantee period: for metal restorations Replacement with an equivalent metal abutment (attached to a Straumann Implant) or with an equivalent metal restoration (for tooth and implant-supported restoration). Lifetime guarantee period: for implants Replacement with an equivalent implant and an equivalent abutment, if necessary.

Note For applicable terms and conditions of the Straumann Guarantee (including the Guarantee territory), please refer to the Straumann Guarantee brochure (152.360/en).

GENERAL IMPORTANT GUIDELINES

IMPORTANT GUIDELINES

Please note

Practitioners must have appropriate knowledge and

Straumann documents may not be reprinted or published, in

instruction in the handling of the Straumann dental

whole or in part, without the written authorization of Strau-

implants, Straumann CADCAM products, Straumann

mann.

regenerative products or other Straumann products (“Straumann Products”) for using the Straumann Products

Straumann® and/or other trademarks and logos from

safely and properly in accordance with the instructions

Straumann® mentioned herein are the trademarks

for use.

or registered trademarks of Straumann Holding AG and/or its affiliates.

The Straumann Product must be used in accordance with the instructions for use provided by the manufacturer. It is the practitioner’s responsibility to use the device in accordance with these instructions for use and to determine, if the device fits to the individual patient situation. The Straumann Products are part of an overall concept and must be used only in conjunction with the corresponding original components and instruments distributed by Institut Straumann AG, its ultimate parent company and all affiliates or subsidiaries of such parent company (“Straumann”) or third party distributors. Use of products made by third parties, which are not distributed by Straumann, will void any warranty or other obligation, express or implied, of Straumann. Availability Some of the Straumann Products listed in this document may not be available in all countries. Caution In addition to the caution notes in this document, our products must be secured against aspiration when used intraorally. Validity Upon publication of this document, all previous versions are superseded. Documentation

For detailed instructions on the Straumann Products, contact your Straumann representative.

GENERAL EXPLANATION OF CODING AND TYPES

EXPLANATION OF CODING AND TYPES

Color coding yellow

Endosteal implant diameter 3.3 mm

red

Endosteal implant diameter 4.1 mm

green

Endosteal implant diameter 4.8 mm

Implant types S

Standard Implant

Standard Plus Implant

Tapered Effect Implant

Bone Level Implant

Connection types Ø 3.5 mm NNC: Narrow Neck CrossFit ® Ø 3.5 mm Ø 4.8 mm RN: Regular Neck Ø 4.8 mm Ø 6.5 mm WN: Wide Neck Ø 6.5 mm Ø 3.3 mm NC: Narrow CrossFit ® Ø 3.3 mm Ø 4.1 mm

Ø 4.8 mm

RC: Regular CrossFit Ø 4.1 and Ø 4.8 mm ®

GENERAL ADDITIONAL INFORMATION

ADDITIONAL INFORMATION QUALITY AT THE CUSTOMERâ&#x20AC;&#x2DC;S SERVICE

Directives 93/42/EEC All production stages carried out by Institut Straumann AG are subject to the standards laid down in the EN ISO 9001 quality assurance system. This European standard establishes in detail the criteria which, in order to be recognized, a company must fulfill regarding comprehensive quality assurance during its manufacturing processes. Medical products have to meet extremely strict requirements, and with good reason. These requirements are defined in the European standard ISO 13485, which we also fulfill. This ensures that the quality of our products and services meets our customersâ&#x20AC;&#x2DC; expectations and can be reproduced and traced at any time. Straumann products with the CE mark fulfill the requirements of the Medical Device Directive 93/42 EEC. Institut Straumann AG fulfills the stringent requirements of the European Directive 93/42/EEC for medical devices as well as the EN ISO 9001 and ISO 13485 standards.

GENERAL CONTACTS

CONTACTS Algeria EURL Implantomed Rue du 11 Décembre 1960 No. 78 Ouled Chebel, Birtouta DZ-Alger Phone: +213 2128 3255 Fax: +213 2129 3255 E-mail: yacinesadaoui@hotmail.com

Brazil Straumann Brasil Ltda Rua Funchal 263 – 12° andar Vila Olímpia BR-04551-060 São Paulo (SP) Phone: +55 11 3058 6888 Fax: +55 11 3058 6899 E-mail: info.br@straumann.com

Argentina Syncrotech SRL Jerónimo Salguero 1575 3°piso AR-1177 Buenos Aires Phone: +54 11 4511 9520 Fax: +54 11 4511 9524 E-mail: info@syncrotech.com.ar

Bulgaria Ultradental Ltd. Kniaz Boris I St., No. 10, ground floor BG-1463 Sofia Phone: +359 2 953 3557 Fax: +359 2 953 3559 E-mail: info@ultradental.net

Australia Straumann Australia P/L 7 Gateway Crt AU-Port Melbourne 3207, Victoria Phone: +61 3 9646 7060 Fax: +61 3 9646 7232 Phone: 1800 660 330 (toll free for Australia) Phone: 0800 408 370 (toll free for New Zealand) E-mail: info.au@straumann.com

Canada Straumann Canada Ltd. 3115 Harvester Road, Suite 100 CA-Burlington, Ontario L7N 3N8 Phone: +1 905 319 2900 Fax: +1 905 319 2911 E-mail: info.can@straumann.com

Austria Straumann GmbH Florido Tower Floridsdorfer Hauptstrasse 1 AT-1210 Vienna Phone: +43 1 294 0660 Fax: +43 1 294 0666 E-mail: info.at@straumann.com Bahrain Gulf Pharmacy Villa 390, Rd. 3009, New Zinj 330 P.O. Box 2576 BH-Manama Phone: +973 1723 9399 Fax: +973 1723 2230 E-mail: reggie@gctbahrain.com Belgium Straumann NV / SA Belgicastraat 3 / Building 503 BE-1930 Zaventem Phone: +32 2 790 1000 Fax: +32 2 790 1020 E-mail: info.be@straumann.com

Chile Comercial Beys S.A. Calle del Arzobispo 0643 Providenica CL-29985 Santiago de Chile Phone: +56 2 7374 963 Fax: +562 7772 644 E-mail: jbucher@beys.cl China Straumann (Beijing) Medical Device Consulting Co. Ltd. 11th floor, Tower B, Jiaming Centre 27#, Dongsanhuan Beilu Chaoyang District CN-Beijing 100020 Phone: +86 10 5775 6555 Fax: +86 10 5775 6556 E-mail: info.cn@straumann.com China Beijing Focus Medical Instrument Co. Ltd. 6 th floor, Fairyland Plaza 83#, Fuxing Road, Haidian District CN-Beijing 100856 Phone: +86 10 8861 2668 Fax: +86 10 8820 3991 E-mail: lixuejun@bjfic.com

Colombia Magnetron Zona Franca S.A Zona Franca del Eje Cafetero Bodega 50 CO-La Tebaida, Quindio Phone: +57 6 747 9857 Fax: +57 6 315 7110 E-mail: aguzman@magnetron.com.co jcnavarro@me.com Croatia Sanitaria Dental d.o.o. Korculanska 4-6 HR-1000 Zagreb Phone: +385 1618 1178 Fax: +385 1618 3059 E-mail: dental@sanitaria.hr Czech Republic Straumann s.r.o. Na Žertvách 2196/34 CZ-180 00 Prague 8 Phone: +420 2 8409 4650 Fax: +420 2 8409 4659 E-mail: info.cz@straumann.com Denmark Straumann Danmark ApS Nygårds Plads 21.1 DK-2605 Brøndby Phone: +45 4616 0666 Fax: +45 4361 2581 E-mail: info.dk@straumann.com Denmark For Straumann ® Emdogain Light House Staeremossen 56 DK-3250 Gilleleje Phone: +45 48 28 56 46 Fax: +45 48 28 60 16 E-mail: jan@lighthousedental.dk Finland Straumann Oy Fredrikinkatu 48 A 7 krs FI-00100 Helsinki Phone: +358 9694 2877 Fax: +358 9694 0695 E-mail: info.fi@straumann.com

GENERAL CONTACTS

CONTACTS France Straumann S.à.r.l. 3, rue de Galmy-Chessy FR-77701 Marne-la-Vallée, Cedex 4 Phone: +33 1 6417 3000 Fax: +33 1 6417 3010 E-mail: info.fr@straumann.com Germany Straumann GmbH Jechtinger Strasse 9 DE-79111 Freiburg Phone: +49 761 4501 0 Fax: +49 761 4501 149 E-mail: info.de@straumann.com Greece Denco Dental SA 15 Mesogion Avenue GR-11526 Athens Phone: +30 210 777 0670 Fax: +30 210 748 6002 E-mail: denco_sa@usa.net Hong Kong Advance Dental Consulting Room 1303-05, Wing Kwok Centre 182 Woo Sung Street Jordan, Kowloon HK-Hong Kong Phone: +852 2384 7666 Fax: +852 2388 0960 E-mail: info@adchk.com Hungary Straumann GmbH Magyarországi Fióktelepe M3 Business Center Hungária körút 179-187 HU-1146 Budapest Phone: +36 1 787 1095 Fax: +36 1 787 1096 E-mail: info.hu@straumann.com Iceland E. Bridde ehf Holtasmári 1 (7th Floor) IS-201 Kópavogur Phone: +354 577 1215 Fax: +354 577 1216 E-mail: ehb@simnet.is

Indonesia Fondaco APL Tower, Podomoro City 27th Floor, Suite 2 Jl. Letjen S. Parman Kav. 28 Grogol Petamburan ID-Jakarta Barat 11470 Phone: +62 21 2903 4388 Fax: +62 21 2903 4391 E-mail: fondaco@fondaco.co.id Iran Mehrarabon Co. - Norouzi Borjsaz Bld, Azadi St 1st Floor, Block 1 IR-1313654913 Teheran Phone: +9821 66 43 98 17-9 Fax: +9821 66 58 09 35 E-mail: info@mehrarabon.ir Israel Dentorient Fuss 28, Hagdud Haivri Street P.O. Box 2232 IL-Tel Aviv 61021 Phone: +972 3 6393640 Fax: +972 3 6393645 E-mail: dana@dentorientfuss.co.il Israel For regenerative products H.A. Systems Ltd. 32 Tuval Street IL-5252243 Ramat-Gan Phone: +972 3 6138777 Fax: +972 3 6138778 E-mail: info@hasystems.co.il Italy Straumann Italia srl Viale Bodio 37 IT-20158 Milano Phone: +39 02 3932 831 Fax: +39 02 3932 8365 E-mail: info.it@straumann.com Japan For Straumann ® Dental Implant System and CARES ® Digital Solutions Straumann Japan K.K. Sapia Tower 16F 1-7-12 Marunouchi, Chiyoda-ku JP-Tokyo 100-0005 Phone: +81 3 5218 2600 Fax: +81 3 5218 2601 E-mail: info.jp@straumann.com

Jordan Arab Medical & Scientific Alliance A.M.S.A. P.O. Box 2509, 11953 Tela’ Al-Ali JO-Amman Phone: +962 6 552 8009 Fax: +962 6 553 2358 E-mail: amsa@amsa.com.jo Kuwait AlphaMedical Co. Bneid Al-Qar, Block 6 - Str. 63 Bldg. 15 Floor 13 P.O. Box 6267 KW-22073 Salmiya Phone: +965 2 247 8612 Fax: +965 2 247 8613 E-mail: alpha_medcis@yahoo.com Lebanon Prodent s.a.l. Corniche al Nahr, Victoria Tower Bldg. P.O. Box 165 884 1100 2080 Ashrafieh LB-Beirut Phone: +961 1 425 042 Fax: +961 1 424 642 E-mail: info@prodent-me.com Lithuania JSC “MED GRUPE” Polocko Str. 21 / Zvirgzdyno g. 1 LT-01205 Vilnius Phone: +370 5 276 1377 Fax: +370 5 275 6850 E-mail: justina@medgrupe.lt Macedonia Dentomed-M Ltd. Bojmija Str. 2/2, P.O. Box MK-1000 Skopje Phone: +389 2 2462 739 Fax: +389 2 2462 781 E-mail: dentomed@mt.net.mk Malaysia Titleray Dental Implants c/o Ricerfarma Marketing (M) Sdn Bhd A-5-28, Penthouse Suite IOI Boulevard, Jalan Kenari 5 Bandar Puchong Jaya MY-47170 Puchong, Selangor DE Phone: +60 3 8075 4644 Fax: +60 3 8075 0995 E-mail: terenceyun@tdi-ricerfarma.com

GENERAL CONTACTS

CONTACTS Malta Bart Enterprises Ltd. 42A, Main Street MT-Balzan BZN 06 Phone: +356 2144 7340 Fax: +356 2144 7341 E-mail: etienne.barthet@bart.com.mt

Pakistan Ahmad Enterprises 7-B New Muslim Town PK-Lahore, Punjab Phone: +92 42 586 6975 Fax: +92 42 586 0945 E-mail: rahman@brain.net.pk

Russia OOO “MEDTECH Implant” Pr. Wernadskogo, 103, Bldg. 1, Off. 29 RU-119 526 Moscow Phone: +7 495 434 3379 Fax: +7 495 786 6559 E-mail: medtech-implant@straumann.ru

Mexico Straumann México SA de CV Rubén Dario #281 int. 1702 Piso 17 Col. Bosque de Chapultepec MX-11580 México, D.F. Phone: +52 55 5282 6262 Fax: +52 55 5282 6289 E-mail: info.mx@straumann.com

Philippines Dentistree Rm. 206 Philippine College of Surgeons Bldg. 992 EDSA, Quezon City, 1105 Philippines Phone: +63 917 531 0186 Fax: +63 2 927 1631 E-mail: jeriel@dentistree.com

Saudi Arabia Thimar Al Jazirah 56 Prince Fawaz Bin Abdul Aziz St. Malaz Dist. SA-11421 Riyadh Phone: +966 1 445 4545 Fax: +966 1 493 4568 E-mail: dental@thimar.com

Morocco Société Academy 3, rue Tabit Bnou Korra, (Avenue Driss 1er) Quartier des Hôpitaux MA-20360 Casablanca Phone: +212 5 2286 2671 Fax: +212 5 2286 2672 E-mail: sofd@menara.ma

Poland Schlamberger Sp. z o.o. Ul. Grzybowska 4/246 PL-00-131 Warsaw Phone: +48 22 254 5423 Fax: +48 22 254 2191 E-mail: office@straumann.com.pl

Serbia Swissdent doo Vojvode Stepe 129 YU-11000 Belgrade Tel.: +381 11 396 2111 Fax +381 11 396 2444 E-mail: natasa.andjelic@swissdent.rs

Netherlands Straumann BV Einsteinweg 15 NL-3404 LE IJsselstein Phone: +31 30 604 6611 Fax: +31 30 604 6728 E-mail: informatie@straumann.com Norway Straumann AS Nedre Vollgate 3 P.O. Box 1751 Vika NO-0122 Oslo Phone: +47 2335 4488 Fax: +47 2335 4480 E-mail: info.no@straumann.com Oman Ibn Sina Medical Supply LLC P.O. Box 481, Mina Al Fahal OM-116 Sultanate of Oman Phone: +968 2450 1836 Fax: +968 2450 2840 E-mail: medicibn@omantal.net.om

Portugal Straumann S.A. Lagoas Park, Edificio 11, Piso 3 PT-2740-244 Porto Salvo Phone: +351 21 422 9170 Fax: +351 21 421 2144 E-mail: info.pt@straumann.com Qatar Ali Bin Ali Medical P.O. Box 75 Bin Omran Area QA-Doha Phone: +974 4 486 3457 Fax: +974 4 488 2585 E-mail: callcenter.med@alibinali.com Romania Implant Division s.r.l. Calea Rahovei nr. 266-268 Corp 63, etaj 6, camera 1 RO-050674 Bucharest Tel.: +40 727 735 534 E-mail: ruxandra.popescu@ implantdivision.com

Singapore Implant Focus No. 6 Ubi Road 1#3-01/04-01 Wintech Centre SG-Singapore 408726 Phone: +65 6741 5411 Fax: +65 6742 3593 E-mail: info@implantfocus.com.sg Slovenia Dentalia d.o.o. Celovska 197 SI-1000 Ljubliana Phone: +386 1 583 7730 Fax: +386 1 510 3215 E-mail: info@dentalia.si South Africa ASM Consultants (Pty) Ltd. PO Box 1453 Parklands 2121 ZA-Johannesburg Phone: +27 11 447 1511 Fax: +27 11 880 8694 E-mail: info@asmrsa.net

GENERAL CONTACTS

CONTACTS South Korea Straumann Dental Korea Inc. 1005 Korea Trade Tower Samseong 1-dong Gangnam-gu KR-Seoul 135-729 Phone: +82 2 2149 3800 Fax: +82 2 2149 3810 E-mail: info.kr@straumann.com Spain Straumann S.A. Edificio Arroyo A Avda. Bruselas, 38 ES-28108 Alcobendas - Madrid Phone: +34 91 344 7700 Fax: +34 91 344 9517 E-mail: info.es@straumann.com Sweden Straumann AB Krokslätts Fabriker 45 431 37 Mölndal Phone: +46 31 708 7500 Fax: +46 31 708 7529 E-mail: info.se@straumann.com

Tunisia Recta Medica Résidence El Yamama, Blc B, 2ème étage App. no. 23, El Manar I TN-2092 Tunis Phone: +216 71 871 960 Fax: +216 71 885 214 E-mail: recta.medica@gnet.tn Turkey Bati Dental Aksu Sokak No. 9/18-19 Sihhiye TR-06410 Ankara Phone: +90 312 434 2000 Fax: +90 312 434 2042 E-mail: info@batidental.com Ukraine INSPE 42, Br. Mikhnovskykh St. UA-79018 Lviv Phone: +38 32 240 3705 Fax: +38 32 294 8399 E-mail: olena.matsekh@inspe.com.ua

Switzerland Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel Phone: +41 61 965 1111 Fax: +41 61 965 1101 E-mail: info@straumann.com

United Arab Emirates Al-Hayat Pharmaceuticals U.A.E. Al Whada Street P.O. Box 4483 AE-Sharjah Phone: +971 6 559 2481 Fax: +971 6 559 3573 E-mail: alhayat@emirates.net.ae

Taiwan Kingcraft Scientific Inc. 13F-1, No. 356, Sec. 5 Nanking E. Rd. TW-10569 Taipei Phone: +886 2 2742 2772 Fax: +886 2 2748 6267 E-mail: info@kingcraft-inc.com

United Kingdom Straumann Ltd. 3 Pegasus Place Gatwick Road GB-Crawley RH10 9AY, West Sussex Phone: +44 1293 65 1230 Fax: +44 1293 65 1239 E-mail: info.uk@straumann.com

Thailand DKSH (Thailand) Limited 2106 Sukhumvit Road TH-Bangkok 10260 Phone: +66 2220 9000 Fax: +66 2225 8992 E-mail: nonglaksna.k@dksh.com

Uruguay Syncrotech S.A. Avenida Brasil 2483 Oficina 702 Esq. Obligado UY-11300 Montevideo Phone: +598 2 708 3236 E-mail: abarnett@adinet.com.uy

USA Straumann USA LLC 60 Minuteman Road US-Andover, MA 01810 Phone: +1 978 747 2500 Fax: +1 978 747 2490 E-mail: info.usa@straumann.com Vietnam DKSH Vietnam Co. Ltd. 9th Floor, Etown 2 Building 364 Cong Hoa Street Tan Binh District VN-Ho Chi Minh City Phone: +84 8 3812 5848 Fax: +84 8 3812 5778 International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone: +41 (0)61 965 11 11 Fax: +41 (0)61 965 11 01 E-mail: info@straumann.com

Straumann® Emdogain® and Straumann® PrefGel®

Straumann®

BoneCeramic™

Straumann® Bone Block Fixation 1.5 mm

Implant Maintenance

17 REGENERATION

REGENERATION

STRAUMANN® EMDOGAIN® AND STRAUMANN® PrefGel®

REGENERATION STRAUMANN® EMDOGAIN® AND STRAUMANN® PrefGel®

Art. No.

Article

075.098

Straumann ® Emdogain ® 0.15 ml contains: 5 x Straumann ® Emdogain ® 0.15 ml

075.101

Straumann ® Emdogain ® 0.3 ml contains: 1 x Straumann ® Emdogain ® 0.3 ml

075.102

Straumann ® Emdogain ® 0.7 ml contains: 1 x Straumann ® Emdogain ® 0.7 ml

075.114

Straumann ® Emdogain ® 0.3 ml Multipack contains: 3 x Straumann ® Emdogain ® 0.3 ml, 3 x Straumann ® PrefGel ® 0.6 ml ready-to-use syringe

075.116

Straumann ® Emdogain ® 0.7 ml Multipack contains: 3 x Straumann ® Emdogain ® 0.7 ml, 3 x Straumann ® PrefGel ® 0.6 ml ready-to-use syringe

075.117

Straumann ® Emdogain ® PLUS contains: 1 x Straumann ® Emdogain ® 0.7 ml, 1 x Straumann ® BoneCeramic™ 400–700, 0.25 g, 1 x Straumann ® PrefGel ® 0.6 ml ready-to-use syringe

075.203

Straumann ® PrefGel ® 0.6 ml contains: 5 x Straumann ® PrefGel ® 0.6 ml ready-to-use syringe

Ordering and deliver y of Straumann ® Emdogain ® and Straumann ® Emdogain ® PLUS The certified quality assurance system for this medical product, which applies to both production and logistics, stipulates that it must be kept in refrigerated storage (at 2 °C–8 °C). Please place in the fridge immediately upon arrival. For this reason, Straumann has special deliver y arrangements. Please contact your local distributor for details.

Ordering and deliver y of Straumann ® PrefGel ® Straumann ® PrefGel ® must be kept in refrigerated storage (at 2 °C–8 °C). Interruption of refrigeration, e.g. during transportation, is permissible. The package should, however, be placed in the refrigerator as soon as possible. The normal terms of deliver y apply for Straumann ® PrefGel ® .

The right of return does not apply to Straumann ® Emdogain ® , Straumann ® Emdogain ® PLUS or Straumann ® PrefGel ® . 14

Art. No.

Article

Dimensions

070.203

Straumann ® BoneCeramic™ 400–700

Granule size: 400–700 µm, Unit size: 0.25 g, Volume: approx. 0.3 ml

070.204

Straumann ® BoneCeramic™ 500–1000

Granule size: 500–1000 µm, Unit size: 0.5 g, Volume: approx. 0.95 ml

070.205

Straumann ® BoneCeramic™ 500–1000

Granule size: 500–1000 µm, Unit size: 1 g, Volume: approx. 1.9 ml

REGENERATION STRAUMANN ® BoneCeramic™

STRAUMANN® BoneCeramic™

STRAUMANN® BONE BLOCK FIXATION 1.5 mm

Art. No.

Article

Dimensions

Material

041.032

Straumann ® Bone Block Fixation cassette for sterilization and storage of drills, miniscrews and screwdriver

Length 130 mm, Width 118 mm, Height 25 mm

Thermoplastic

044.125

Glide hole drill

Length 37 mm, Stop 20 mm, Ø 1.5 mm

Stainless steel

044.126

Residual ridge drill

Length 37 mm, Stop 16 mm, Ø 1.25 mm

Stainless steel

042.700V5

Crosshead mini-screw

Length 8 mm, Ø 1.5 mm

042.701V5

Crosshead mini-screw

Length 10 mm, Ø 1.5 mm

042.702V5

Crosshead mini-screw

Length 12 mm, Ø 1.5 mm

042.703V5

Crosshead mini-screw

Length 14 mm, Ø 1.5 mm

040.360

Screwdriver complete, with screwdriver blade and screw-holding device for implant screws, crosshead Ø 1.5 mm

Length 160 mm

Al/Stainless steel

046.256

Screwdriver blade for implant screws, crosspoint Ø 1.5 mm

Length 69 mm

Stainless steel

046.257

Screw-holding device for screwdriver blade 046.256

Length 45 mm

Stainless steel

046.258

Screwdriver handle for screwdriver blade 046.256

Length 100 mm

Al/Stainless steel

Basic set REGENERATION STRAUMANN® BONE BLOCK FIXATION 1.5 mm

Spare parts

IMPLANT MAINTENANCE

Art. No.

Article

Dimensions

Material

Straumann ® TiBrush™ Titanium brush for openflap mechanical debridement of titanium implant surfaces in bone defects caused by periimplantitis

Standard dental coupling Ø 2.35 mm, Length 39.2 mm

Stainless steel/Ti

070.005

REGENERATION IMPLANT MAINTENANCE

Straumann ® TiBrush™

Implants ● Standard Implants ● Standard Plus Implants ● Tapered Effect Implants ● Bone Level Implants ● Straumann ® PURE Ceramic Implants ● TempImplants

20 25 32 36 42 46

Surgical instruments ● Surgical planning aids ● Implant bed preparation instruments ● Auxiliary instruments ● Surgical cassette ● Osteotomes ● Explantation

47 49 57 59 60 63

Straumann® Guided Surgery ● gonyX™ ● Guided Surgery instruments ● Auxiliary instruments ● Guided Surgery Cassette

66 68 72 74

SURGERY

STANDARD ROXOLID® IMPLANTS Ø 3.3 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.501S

Standard Implant

SLActive ® 8 mm

Roxolid ®

033.502S

Standard Implant

SLActive ® 10 mm

Roxolid ®

033.503S

Standard Implant

SLActive ® 12 mm

Roxolid ®

033.504S

Standard Implant

SLActive ® 14 mm

Roxolid ®

033.505S

Standard Implant

SLActive ® 16 mm

Roxolid ®

043.255S

Standard Implant

SLA ® 8 mm

Roxolid ®

043.256S

Standard Implant

SLA ® 10 mm

Roxolid ®

043.257S

Standard Implant

SLA ® 12 mm

Roxolid ®

043.258S

Standard Implant

SLA ® 14 mm

Roxolid ®

043.259S

Standard Implant

SLA ® 16 mm

Roxolid ®

033.431G

Standard Implant guided

SLActive ® 8 mm

Roxolid ®

033.432G

Standard Implant guided

SLActive ® 10 mm

Roxolid ®

033.433G

Standard Implant guided

SLActive ® 12 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY STANDARD ROXOLID ® IMPLANTS Ø 3.3 mm

Roxolid ® SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

048.037S

Sterile RN Healing cap

Height 4.5 mm

STANDARD IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.530S

Standard Implant

SLActive ® 6 mm

Roxolid ®

033.531S

Standard Implant

SLActive ® 8 mm

Roxolid ®

033.532S

Standard Implant

SLActive ® 10 mm

Roxolid ®

033.533S

Standard Implant

SLActive ® 12 mm

Roxolid ®

033.534S

Standard Implant

SLActive ® 14 mm

Roxolid ®

033.535S

Standard Implant

SLActive ® 16 mm

Roxolid ®

043.155S

Standard Implant

SLA ® 6 mm

Roxolid ®

043.156S

Standard Implant

SLA ® 8 mm

Roxolid ®

043.157S

Standard Implant

SLA ® 10 mm

Roxolid ®

043.158S

Standard Implant

SLA ® 12 mm

Roxolid ®

043.159S

Standard Implant

SLA ® 14 mm

Roxolid ®

043.160S

Standard Implant

SLA ® 16 mm

Roxolid ®

033.031G

Standard Implant guided

SLActive ® 8 mm

033.032G

Standard Implant guided

SLActive ® 10 mm

033.033G

Standard Implant guided

SLActive ® 12 mm

Roxolid ® SLActive ® with Loxim™

SURGERY STANDARD IMPLANTS Ø 4.1 mm

Roxolid ® SLA ® with Loxim™

Ti SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

STANDARD IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

048.037S

Sterile RN Healing cap

Height 4.5 mm

SURGERY STANDARD IMPLANTS Ø 4.1 mm 22

STANDARD ROXOLID® IMPLANTS Ø 4.8 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.580S

Standard Implant

SLActive ® 6 mm

Roxolid ®

033.581S

Standard Implant

SLActive ® 8 mm

Roxolid ®

033.582S

Standard Implant

SLActive ® 10 mm

Roxolid ®

033.583S

Standard Implant

SLActive ® 12 mm

Roxolid ®

033.584S

Standard Implant

SLActive ® 14 mm

Roxolid ®

043.061S

Standard Implant

SLA ® 6 mm

Roxolid ®

043.062S

Standard Implant

SLA ® 8 mm

Roxolid ®

043.063S

Standard Implant

SLA ® 10 mm

Roxolid ®

043.064S

Standard Implant

SLA ® 12 mm

Roxolid ®

043.065S

Standard Implant

SLA ® 14 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

SURGERY STANDARD ROXOLID ® IMPLANTS Ø 4.8 mm

Roxolid ® SLA ® with Loxim™

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

048.037S

Sterile RN Healing cap

Height 4.5 mm

STANDARD ROXOLID® IMPLANTS Ø 4.8 mm WIDE NECK Ø 6.5 mm

Art. No.

Article

Dimensions

Material

033.600S

Standard Implant

SLActive ® 6 mm

Roxolid ®

033.601S

Standard Implant

SLActive ® 8 mm

Roxolid ®

033.602S

Standard Implant

SLActive ® 10 mm

Roxolid ®

033.603S

Standard Implant

SLActive ® 12 mm

Roxolid ®

043.606S

Standard Implant

SLA ® 6 mm

Roxolid ®

043.607S

Standard Implant

SLA ® 8 mm

Roxolid ®

043.608S

Standard Implant

SLA ® 10 mm

Roxolid ®

043.609S

Standard Implant

SLA ® 12 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY STANDARD ROXOLID ® IMPLANTS Ø 4.8 mm

Closure screws and healing caps 048.375S

Sterile WN Closure cap

048.030S

Sterile WN Healing cap labial bevel

Height 2 mm

048.038S

Sterile WN Healing cap

Height 2 mm

048.039S

Sterile WN Healing cap

Height 3 mm

048.053S

Sterile WN Healing cap

Height 4.5 mm

STANDARD PLUS ROXOLID® IMPLANTS Ø 3.3 mm NARROW NECK CrossFit® Ø 3.5 mm

Art. No.

Article

Dimensions

Material

033.416S

Standard Plus Implant

SLActive ® 8 mm

Roxolid ®

033.417S

Standard Plus Implant

SLActive ® 10 mm

Roxolid ®

033.418S

Standard Plus Implant

SLActive ® 12 mm

Roxolid ®

033.419S

Standard Plus Implant

SLActive ® 14 mm

Roxolid ®

043.416S

Standard Plus Implant

SLA ® 8 mm

Roxolid ®

043.417S

Standard Plus Implant

SLA ® 10 mm

Roxolid ®

043.418S

Standard Plus Implant

SLA ® 12 mm

Roxolid ®

043.419S

Standard Plus Implant

SLA ® 14 mm

Roxolid ®

048.324S

Sterile NNC Closure cap

Height 0 mm

048.325S

Sterile NNC Closure screw

Height 1.5 mm

048.071S

Sterile NNC Healing cap reduced height

Height 3 mm

048.074S

Sterile NNC Healing cap regular height

Height 4.5 mm

048.082S

Sterile NNC Healing cap labial bevel

Height 2 mm

Roxolid ® SLActive ® with Loxim™

SURGERY STANDARD PLUS ROXOLID ® IMPLANTS Ø 3.3 mm

Roxolid ® SLA ® with Loxim™

Closure screws and healing caps

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

STANDARD PLUS IMPLANTS Ø 3.3 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.511S

Standard Plus Implant

SLActive ® 8 mm

Roxolid ®

033.512S

Standard Plus Implant

SLActive ® 10 mm

Roxolid ®

033.513S

Standard Plus Implant

SLActive ® 12 mm

Roxolid ®

033.514S

Standard Plus Implant

SLActive ® 14 mm

Roxolid ®

043.260S

Standard Plus Implant

SLA ® 8 mm

Roxolid ®

043.261S

Standard Plus Implant

SLA ® 10 mm

Roxolid ®

043.262S

Standard Plus Implant

SLA ® 12 mm

Roxolid ®

043.263S

Standard Plus Implant

SLA ® 14 mm

Roxolid ®

Standard Plus Implant

SLA ® 8 mm

043.152S

Standard Plus Implant

SLA ®

10 mm

043.153S

Standard Plus Implant

SLA ® 12 mm

043.154S

Standard Plus Implant

SLA ® 14 mm

033.451G

Standard Plus Implant guided

SLActive ® 8 mm

Roxolid ®

033.452G

Standard Plus Implant guided

SLActive ® 10 mm

Roxolid ®

033.453G

Standard Plus Implant guided

SLActive ® 12 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY STANDARD PLUS IMPLANTS Ø 3.3 mm

Ti SLA ® without Loxim™ 043.151S

Roxolid ® SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

048.037S

Sterile RN Healing cap

Height 4.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

STANDARD PLUS IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.560S

Standard Plus Implant

SLActive ® 6 mm

Roxolid ®

033.561S

Standard Plus Implant

SLActive ® 8 mm

Roxolid ®

033.562S

Standard Plus Implant

SLActive ® 10 mm

Roxolid ®

033.563S

Standard Plus Implant

SLActive ® 12 mm

Roxolid ®

033.564S

Standard Plus Implant

SLActive ® 14 mm

Roxolid ®

Standard Plus Implant

SLActive ® 4 mm

Roxolid ®

043.161S

Standard Plus Implant

SLA ® 6 mm

Roxolid ®

043.162S

Standard Plus Implant

SLA ® 8 mm

Roxolid ®

043.163S

Standard Plus Implant

SLA ® 10 mm

Roxolid ®

043.164S

Standard Plus Implant

SLA ® 12 mm

Roxolid ®

043.165S

Standard Plus Implant

SLA ® 14 mm

Roxolid ®

Standard Plus Implant

SLA ® 8 mm

043.052S

Standard Plus Implant

SLA ®

10 mm

043.053S

Standard Plus Implant

SLA ® 12 mm

043.054S

Standard Plus Implant

SLA ® 14 mm

033.051G

Standard Plus Implant guided

SLActive ® 8 mm

033.052G

Standard Plus Implant guided

SLActive ® 10 mm

033.053G

Standard Plus Implant guided

SLActive ® 12 mm

Roxolid ® SLActive ® with Loxim™

033.043S

SURGERY STANDARD PLUS IMPLANTS Ø 4.1 mm

Roxolid ® SLActive ® with Loxim™, short

Roxolid ® SLA ® with Loxim™

Ti SLA ® without Loxim™ 043.051S

Ti SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

STANDARD PLUS IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

048.037S

Sterile RN Healing cap

Height 4.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

SURGERY STANDARD PLUS IMPLANTS Ø 4.1 mm 28

STANDARD PLUS IMPLANTS Ø 4.8 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.590S

Standard Plus Implant

SLActive ® 6 mm

Roxolid ®

033.591S

Standard Plus Implant

SLActive ® 8 mm

Roxolid ®

033.592S

Standard Plus Implant

SLActive ® 10 mm

Roxolid ®

033.593S

Standard Plus Implant

SLActive ® 12 mm

Roxolid ®

033.594S

Standard Plus Implant

SLActive ® 14 mm

Roxolid ®

Standard Plus Implant

SLActive ® 4 mm

Roxolid ®

043.066S

Standard Plus Implant

SLA ® 6 mm

Roxolid ®

043.067S

Standard Plus Implant

SLA ® 8 mm

Roxolid ®

043.068S

Standard Plus Implant

SLA ® 10 mm

Roxolid ®

043.069S

Standard Plus Implant

SLA ® 12 mm

Roxolid ®

043.070S

Standard Plus Implant

SLA ® 14 mm

Roxolid ®

043.251S

Standard Plus Implant

SLA ® 8 mm

043.252S

Standard Plus Implant

SLA ® 10 mm

043.253S

Standard Plus Implant

SLA ® 12 mm

Standard Plus Implant

SLA ®

14 mm

033.251G

Standard Plus Implant guided

SLActive ® 8 mm

033.252G

Standard Plus Implant guided

SLActive ® 10 mm

033.253G

Standard Plus Implant guided

SLActive ® 12 mm

Roxolid ® SLActive ® with Loxim™

033.044S

SURGERY STANDARD PLUS IMPLANTS Ø 4.8 mm

Roxolid ® SLActive ® with Loxim™, short

Roxolid ® SLA ® with Loxim™

Ti SLA ® without Loxim™

043.254S Ti SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

STANDARD PLUS IMPLANTS Ø 4.8 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

048.037S

Sterile RN Healing cap

Height 4.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

SURGERY STANDARD PLUS IMPLANTS Ø 4.8 mm 30

STANDARD PLUS IMPLANTS Ø 4.8 mm WIDE NECK Ø 6.5 mm

Art. No.

Article

Dimensions

Material

033.610S

Standard Plus Implant

SLActive ® 6 mm

Roxolid ®

033.611S

Standard Plus Implant

SLActive ® 8 mm

Roxolid ®

033.612S

Standard Plus Implant

SLActive ® 10 mm

Roxolid ®

033.613S

Standard Plus Implant

SLActive ® 12 mm

Roxolid ®

Standard Plus Implant

SLActive ® 4 mm

Roxolid ®

043.655S

Standard Plus Implant

SLA ® 6 mm

Roxolid ®

043.656S

Standard Plus Implant

SLA ® 8 mm

Roxolid ®

043.657S

Standard Plus Implant

SLA ® 10 mm

Roxolid ®

043.658S

Standard Plus Implant

SLA ® 12 mm

Roxolid ®

043.651S

Standard Plus Implant

SLA ® 8 mm

043.652S

Standard Plus Implant

SLA ® 10 mm

043.653S

Standard Plus Implant

SLA ® 12 mm

Roxolid ® SLActive ® with Loxim™

033.045S

SURGERY STANDARD PLUS IMPLANTS Ø 4.8 mm

Roxolid ® SLActive ® with Loxim™, short

Roxolid ® SLA ® with Loxim™

Ti SLA ® without Loxim™

Closure screws and healing caps 048.375S

Sterile WN Closure cap

048.030S

Sterile WN Healing cap labial bevel

Height 2 mm

048.038S

Sterile WN Healing cap

Height 2 mm

048.039S

Sterile WN Healing cap

Height 3 mm

048.053S

Sterile WN Healing cap

Height 4.5 mm

TAPERED EFFECT ROXOLID® IMPLANTS Ø 3.3 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.521S

Tapered Effect Implant

SLActive ® 8 mm

Roxolid ®

033.522S

Tapered Effect Implant

SLActive ® 10 mm

Roxolid ®

033.523S

Tapered Effect Implant

SLActive ® 12 mm

Roxolid ®

033.524S

Tapered Effect Implant

SLActive ® 14 mm

Roxolid ®

043.264S

Tapered Effect Implant

SLA ® 8 mm

Roxolid ®

043.265S

Tapered Effect Implant

SLA ® 10 mm

Roxolid ®

043.266S

Tapered Effect Implant

SLA ® 12 mm

Roxolid ®

043.267S

Tapered Effect Implant

SLA ® 14 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY TAPERED EFFECT ROXOLID ® IMPLANTS Ø 3.3 mm

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

048.037S

Sterile RN Healing cap

Height 4.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

TAPERED EFFECT IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

033.571S

Tapered Effect Implant

SLActive ® 8 mm

Roxolid ®

033.572S

Tapered Effect Implant

SLActive ® 10 mm

Roxolid ®

033.573S

Tapered Effect Implant

SLActive ® 12 mm

Roxolid ®

033.574S

Tapered Effect Implant

SLActive ® 14 mm

Roxolid ®

043.166S

Tapered Effect Implant

SLA ® 8 mm

Roxolid ®

043.167S

Tapered Effect Implant

SLA ® 10 mm

Roxolid ®

043.168S

Tapered Effect Implant

SLA ® 12 mm

Roxolid ®

043.169S

Tapered Effect Implant

SLA ® 14 mm

Roxolid ®

033.761G

Tapered Effect Implant guided

SLActive ® 8 mm

033.762G

Tapered Effect Implant guided

SLActive ® 10 mm

033.763G

Tapered Effect Implant guided

SLActive ® 12 mm

Roxolid ® SLActive ® with Loxim™

SURGERY TAPERED EFFECT IMPLANTS Ø 4.1 mm

Roxolid ® SLA ® with Loxim™

Ti SLActive ® , guided

Closure screws and healing caps 048.371S

Sterile RN Closure cap small

048.373S

Sterile RN Closure cap large

Height 1.5 mm

048.033S

Sterile RN Healing cap

Height 2 mm

048.034S

Sterile RN Healing cap

Height 3 mm

TAPERED EFFECT IMPLANTS Ø 4.1 mm REGULAR NECK Ø 4.8 mm

Art. No.

Article

Dimensions

Material

048.037S

Sterile RN Healing cap

Height 4.5 mm

048.028S

Sterile RN Healing cap labial bevel, small

Height 2 mm

048.029S

Sterile RN Healing cap labial bevel, large

Height 3.5 mm

SURGERY TAPERED EFFECT IMPLANTS Ø 4.1 mm 34

TAPERED EFFECT ROXOLID® IMPLANTS Ø 4.8 mm WIDE NECK Ø 6.5 mm

Art. No.

Article

Dimensions

Material

033.622S

Tapered Effect Implant

SLActive ® 10 mm

Roxolid ®

033.623S

Tapered Effect Implant

SLActive ® 12 mm

Roxolid ®

033.624S

Tapered Effect Implant

SLActive ® 14 mm

Roxolid ®

043.660S

Tapered Effect Implant

SLA ® 10 mm

Roxolid ®

043.661S

Tapered Effect Implant

SLA ® 12 mm

Roxolid ®

043.662S

Tapered Effect Implant

SLA ® 14 mm

Roxolid ®

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

048.375S

Sterile WN Closure cap

048.030S

Sterile WN Healing cap labial bevel

Height 2 mm

048.038S

Sterile WN Healing cap

Height 2 mm

048.039S

Sterile WN Healing cap

Height 3 mm

048.053S

Sterile WN Healing cap

Height 4.5 mm

SURGERY TAPERED EFFECT ROXOLID ® IMPLANTS Ø 4.8 mm

Closure screws and healing caps Ti

BONE LEVEL IMPLANTS Ø 3.3 mm NARROW CrossFit®

Art. No.

Article

Dimensions

Material

021.2308

Bone Level Implant

SLActive ® 8 mm

Roxolid ®

021.2310

Bone Level Implant

SLActive ® 10 mm

Roxolid ®

021.2312

Bone Level Implant

SLActive ® 12 mm

Roxolid ®

021.2314

Bone Level Implant

SLActive ® 14 mm

Roxolid ®

021.2508

Bone Level Implant

SLA ® 8 mm

Roxolid ®

021.2510

Bone Level Implant

SLA ® 10 mm

Roxolid ®

021.2512

Bone Level Implant

SLA ® 12 mm

Roxolid ®

021.2514

Bone Level Implant

SLA ® 14 mm

Roxolid ®

Bone Level Implant

SLA ® 8 mm

021.2410

Bone Level Implant

SLA ®

10 mm

021.2412

Bone Level Implant

SLA ® 12 mm

021.2414

Bone Level Implant

SLA ® 14 mm

021.2208G

Bone Level Implant guided

SLActive ® 8 mm

Roxolid ®

021.2210G

Bone Level Implant guided

SLActive ® 10 mm

Roxolid ®

021.2212G

Bone Level Implant guided

SLActive ® 12 mm

Roxolid ®

024.2100S

Sterile NC Closure cap

Height 0 mm

024.2105S

Sterile NC Closure cap

Height 0.5 mm

024.2222S

Sterile NC Healing abutment conical

Height 2 mm, Ø 3.6 mm

024.2224S

Sterile NC Healing abutment conical

Height 3.5 mm, Ø 3.6 mm

024.2226S

Sterile NC Healing abutment conical

Height 5 mm, Ø 3.6 mm

024.2242S

Sterile NC Healing abutment conical

Height 2 mm, Ø 4.8 mm

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY BONE LEVEL IMPLANTS Ø 3.3 mm

Ti SLA ® without Loxim™ 021.2408

Roxolid ® SLActive ® , guided

Closure screws and healing abutments

BONE LEVEL IMPLANTS Ø 3.3 mm

Art. No.

Article

Dimensions

Material

024.2244S

Sterile NC Healing abutment conical

Height 3.5 mm, Ø 4.8 mm

024.2246S

Sterile NC Healing abutment conical

Height 5 mm, Ø 4.8 mm

024.2234S

Sterile NC Healing abutment bottle

Height 3.5 mm, Ø 3.3 mm

024.2236S

Sterile NC Healing abutment bottle

Height 5 mm, Ø 3.3 mm

024.2270S

Sterile NC Healing abutment customizable

Ø 5 mm

PEEK

SURGERY BONE LEVEL IMPLANTS Ø 3.3 mm

NARROW CrossFit®

BONE LEVEL IMPLANTS Ø 4.1 mm REGULAR CrossFit®

Art. No.

Article

Dimensions

Material

021.4308

Bone Level Implant

SLActive ® 8 mm

Roxolid ®

021.4310

Bone Level Implant

SLActive ® 10 mm

Roxolid ®

021.4312

Bone Level Implant

SLActive ® 12 mm

Roxolid ®

021.4314

Bone Level Implant

SLActive ® 14 mm

Roxolid ®

021.4508

Bone Level Implant

SLA ® 8 mm

Roxolid ®

021.4510

Bone Level Implant

SLA ® 10 mm

Roxolid ®

021.4512

Bone Level Implant

SLA ® 12 mm

Roxolid ®

021.4514

Bone Level Implant

SLA ® 14 mm

Roxolid ®

Bone Level Implant

SLA ® 8 mm

021.4410

Bone Level Implant

SLA ®

10 mm

021.4412

Bone Level Implant

SLA ® 12 mm

021.4414

Bone Level Implant

SLA ® 14 mm

021.4108G

Bone Level Implant guided

SLActive ® 8 mm

021.4110G

Bone Level Implant guided

SLActive ® 10 mm

021.4112G

Bone Level Implant guided

SLActive ® 12 mm

024.4100S

Sterile RC Closure cap

Height 0 mm

024.4105S

Sterile RC Closure cap

Height 0.5 mm

024.4222S

Sterile RC Healing abutment conical

Height 2 mm, Ø 5 mm

024.4224S

Sterile RC Healing abutment conical

Height 4 mm, Ø 5 mm

024.4226S

Sterile RC Healing abutment conical

Height 6 mm, Ø 5 mm

024.4234S

Sterile RC Healing abutment bottle

Height 4 mm, Ø 4.4 mm

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY BONE LEVEL IMPLANTS Ø 4.1 mm

Ti SLA ® without Loxim™ 021.4408

Ti SLActive ® , guided

Closure screws and healing abutments

BONE LEVEL IMPLANTS Ø 4.1 mm

Art. No.

Article

Dimensions

Material

024.4236S

Sterile RC Healing abutment bottle

Height 6 mm, Ø 4.7 mm

024.4242S

Sterile RC Healing abutment conical

Height 2 mm, Ø 6.5 mm

024.4244S

Sterile RC Healing abutment conical

Height 4 mm, Ø 6.5 mm

024.4246S

Sterile RC Healing abutment conical

Height 6 mm, Ø 6.5 mm

024.4270S

Sterile RC Healing abutment customizable

Ø 7 mm

PEEK

SURGERY BONE LEVEL IMPLANTS Ø 4.1 mm

REGULAR CrossFit®

BONE LEVEL IMPLANTS Ø 4.8 mm REGULAR CrossFit®

Art. No.

Article

Dimensions

Material

021.6308

Bone Level Implant

SLActive ® 8 mm

Roxolid ®

021.6310

Bone Level Implant

SLActive ® 10 mm

Roxolid ®

021.6312

Bone Level Implant

SLActive ® 12 mm

Roxolid ®

021.6314

Bone Level Implant

SLActive ® 14 mm

Roxolid ®

021.6508

Bone Level Implant

SLA ® 8 mm

Roxolid ®

021.6510

Bone Level Implant

SLA ® 10 mm

Roxolid ®

021.6512

Bone Level Implant

SLA ® 12 mm

Roxolid ®

021.6514

Bone Level Implant

SLA ® 14 mm

Roxolid ®

Bone Level Implant

SLA ® 8 mm

021.6410

Bone Level Implant

SLA ®

10 mm

021.6412

Bone Level Implant

SLA ® 12 mm

021.6414

Bone Level Implant

SLA ® 14 mm

021.6108G

Bone Level Implant guided

SLActive ® 8 mm

021.6110G

Bone Level Implant guided

SLActive ® 10 mm

021.6112G

Bone Level Implant guided

SLActive ® 12 mm

024.4100S

Sterile RC Closure cap

Height 0 mm

024.4105S

Sterile RC Closure cap

Height 0.5 mm

024.4222S

Sterile RC Healing abutment conical

Height 2 mm, Ø 5 mm

024.4224S

Sterile RC Healing abutment conical

Height 4 mm, Ø 5 mm

024.4226S

Sterile RC Healing abutment conical

Height 6 mm, Ø 5 mm

024.4234S

Sterile RC Healing abutment bottle

Height 4 mm, Ø 4.4 mm

Roxolid ® SLActive ® with Loxim™

Roxolid ® SLA ® with Loxim™

SURGERY BONE LEVEL IMPLANTS Ø 4.8 mm

Ti SLA ® without Loxim™ 021.6408

Ti SLActive ® , guided

Closure screws and healing abutments

BONE LEVEL IMPLANTS Ø 4.8 mm

Art. No.

Article

Dimensions

Material

024.4236S

Sterile RC Healing abutment bottle

Height 6 mm, Ø 4.7 mm

024.4242S

Sterile RC Healing abutment conical

Height 2 mm, Ø 6.5 mm

024.4244S

Sterile RC Healing abutment conical

Height 4 mm, Ø 6.5 mm

024.4246S

Sterile RC Healing abutment conical

Height 6 mm, Ø 6.5 mm

024.4270S

Sterile RC Healing abutment customizable

Ø 7 mm

PEEK

SURGERY BONE LEVEL IMPLANTS Ø 4.8 mm

REGULAR CrossFit®

STRAUMANN® PURE CERAMIC IMPLANTS

Art. No.

Article

Dimensions

Material

031.021S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 8 mm, Abutment height 4 mm

ZrO 2

031.022S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 10 mm, Abutment height 4 mm

ZrO 2

031.023S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 12 mm, Abutment height 4 mm

ZrO 2

031.024S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 14 mm, Abutment height 4 mm

ZrO 2

031.031S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 8 mm, Abutment height 5.5 mm

ZrO 2

031.032S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 10 mm, Abutment height 5.5 mm

ZrO 2

031.033S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 12 mm, Abutment height 5.5 mm

ZrO 2

031.034S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 14 mm, Abutment height 5.5 mm

ZrO 2

031.123

RD Position indicator

Ø 2.2 mm, Abutment height 4 mm, Length 8 mm

031.125

RD Position indicator

Ø 3.5 mm, Abutment height 4 mm, Length 8 mm

031.143

RD Position indicator

Ø 2.2 mm, Abutment height 5.5 mm, Length 8 mm

031.145

RD Position indicator

Ø 3.5 mm, Abutment height 5.5 mm, Length 8 mm

031.210

RD Analog

Abutment height 4 mm

TAN

031.211

RD Analog

Abutment height 5.5 mm

TAN

Regular Diameter (RD) Ø 4.1 mm, monotype

SURGERY STRAUMANN ® PURE CERAMIC IMPLANTS

Corresponding components

Note The Straumann ® PURE Ceramic Implants and corresponding components will be launched in selected countries in April 2014. 42

Art. No.

Article

Dimensions

Material

031.260

RD Impression cap

Abutment height 4 mm

POM

031.261

RD Impression cap

Abutment height 5.5 mm

POM

031.310

RD Temporary coping for crown

PMMA

031.311

RD Temporary coping for bridges

PMMA

031.330

Protective cap

Abutment height 4 mm

PEEK

031.331

Protective cap

Abutment height 5.5 mm

PEEK

SURGERY STRAUMANN 速 PURE CERAMIC IMPLANTS

STRAUMANN速 PURE CERAMIC IMPLANTS

Note The Straumann 速 PURE Ceramic Implants and corresponding components will be launched in selected countries in April 2014. 43

STRAUMANN® PURE CERAMIC IMPLANTS

Art. No.

Article

Dimensions

Material

031.001S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 8 mm, Abutment height 4 mm

ZrO 2

031.002S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 10 mm, Abutment height 4 mm

ZrO 2

031.003S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 12 mm, Abutment height 4 mm

ZrO 2

031.004S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 14 mm, Abutment height 4 mm

ZrO 2

031.011S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 8 mm, Abutment height 5.5 mm

ZrO 2

031.012S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 10 mm, Abutment height 5.5 mm

ZrO 2

031.013S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 12 mm, Abutment height 5.5 mm

ZrO 2

031.014S

Straumann ® PURE Ceramic Implant monotype

ZLA™ 14 mm, Abutment height 5.5 mm

ZrO 2

031.102

ND Position indicator

Ø 2.2 mm, Abutment height 4 mm, Length 8 mm

031.103

ND Position indicator

Ø 2.8 mm, Abutment height 4 mm, Length 8 mm

031.112

ND Position indicator

Ø 2.2 mm, Abutment height 5.5 mm, Length 8 mm

031.113

ND Position indicator

ZLA™ 2.8 mm, Abutment height 5.5 mm, Length 8 mm

031.200

ND Implant Analog

Abutment height 4 mm

TAN

031.201

ND Implant Analog

Abutment height 5.5 mm

TAN

Narrow Diameter (ND) Ø 3.3 mm, monotype

SURGERY STRAUMANN ® PURE CERAMIC IMPLANTS

Corresponding components

Note The Straumann ® PURE Ceramic Implants and corresponding components will be launched in selected countries in April 2014. 44

Art. No.

Article

Dimensions

Material

031.250

ND Impression Cap

Abutment height 4 mm

POM

031.251

ND Impression Cap

Abutment height 5.5 mm

POM

031.300

ND Temporary Coping for crown

PMMA

031.301

ND Temporary Coping for bridges

PMMA

031.320

ND Protective Cap

Abutment height 4 mm

PEEK

031.321

ND Protective Cap

Abutment height 5.5 mm

PEEK

SURGERY STRAUMANN 速 PURE CERAMIC IMPLANTS

STRAUMANN速 PURE CERAMIC IMPLANTS

Note The Straumann 速 PURE Ceramic Implants and corresponding components will be launched in selected countries in April 2014. 45

TEMPIMPLANTS

Art. No.

Article

Dimensions

Material

80371SV4

TempImplant

Ø 2 mm, Length 10 mm

Ti-6Al-7Nb

80372SV4

TempImplant

Ø 2 mm, Length 12 mm

Ti-6Al-7Nb

80381

Drill

Length 37 mm, Ø 1.5 mm

Stainless steel

80363

TempImplant inserting device mechanical

Length 21.5 mm

Stainless steel

80398

TempImplant inserting device manual

Length 19 mm

Stainless steel

80356

TempImplant bending tool

Length 82 mm, Height 21 mm

Stainless steel

048.109

Transfer pin for retentive anchor*

Length 18 mm

Stainless steel

Implants

Auxiliary parts

SURGERY TEMPIMPLANTS

Dalbo ® -Rotex ® Matrix 80399V4

Dalbo ® -Rotex ® Matrix

* = The geometry of the spherical head and square base corresponds to the geometry of the retentive anchor (Art. No. 048.439).

SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

049.076V4

X-ray reference sphere

Ă&#x2DC; 5 mm

Stainless steel

150.215

X-ray templates for Standard and Standard Plus Implants

Plastic

150.230

X-ray templates for Tapered Effect Implants

Plastic

150.216

X-ray templates for Bone Level Implants

Plastic

046.147

Diagnostic T auxiliary instrument for diagnosis

Length 65 mm, Width 33 mm

046.148

Implant distance indicator for Standard, Standard Plus and Tapered Effect

Length 100 mm

Ti/Stainless steel

026.0901

Bone Level Implant distance indicator

Length 100 mm

Ti/Stainless steel

SURGERY SURGICAL INSTRUMENTS

SURGICAL PLANNING AIDS

SURGICAL INSTRUMENTS SURGICAL PLANNING AIDS

Art. No.

Article

Dimensions

Material

Components for fabricating an individual drill template

SURGERY SURGICAL INSTRUMENTS

049.810V4

Drill sleeve with collar

Length 10 mm, Inner Ø 2.4 mm, Outer Ø 3.5 mm

049.818V4

Stepped pin for 049.810V4

Length 16 mm, Ø 2.2/3.5 mm

049.816V4

Pin for 049.810V4

Length 16 mm, Ø 2.2 mm

049.817V4

Pin for 049.810V4

Length 10 mm, Ø 2.2 mm

049.819V4

Pin for 049.810V4

Length 16 mm, Ø 3.5 mm

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

044.022

Round bur

Ø 1.4 mm

Stainless steel

044.003

Round bur

Ø 2.3 mm

Stainless steel

044.004

Round bur

Ø 3.1 mm

Stainless steel

044.210

Pilot drill 1 short

Length 33 mm, Ø 2.2 mm

Stainless steel

044.211

Pilot drill 1 long

Length 41 mm, Ø 2.2 mm

Stainless steel

044.214

Pilot drill 2 short

Length 33 mm, Ø 2.8 mm

Stainless steel

044.215

Pilot drill 2 long

Length 41 mm, Ø 2.8 mm

Stainless steel

044.250

Twist drill PRO short

Length 33 mm, Ø 3.5 mm

Stainless steel

044.251

Twist drill PRO long

Length 41 mm, Ø 3.5 mm

Stainless steel

044.254

Twist drill PRO short

Length 33 mm, Ø 4.2 mm

Stainless steel

044.255

Twist drill PRO long

Length 41 mm, Ø 4.2 mm

Stainless steel

044.086

SP Profile drill short

Regular Neck, Length 25 mm, Ø 2.8 mm

Stainless steel

044.087

SP Profile drill long

Regular Neck, Length 34 mm, Ø 2.8 mm

Stainless steel

044.088

SP Profile drill short

Regular Neck, Length 25 mm, Ø 3.5 mm

Stainless steel

Round burs

SURGERY SURGICAL INSTRUMENTS

Pilot drills

Twist drills

Profile drills

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

044.089

SP Profile drill long

Regular Neck, Length 34 mm, Ø 3.5 mm

Stainless steel

044.084

SP Profile drill short

Wide Neck, Length 25 mm, Ø 4.2 mm

Stainless steel

044.085

SP Profile drill long

Wide Neck, Length 34 mm, Ø 4.2 mm

Stainless steel

044.701

TE Profile drill short

Regular Neck, Length 28 mm, Ø 2.8 mm

Stainless steel

044.708

TE Profile drill long

Regular Neck, Length 37 mm, Ø 2.8 mm

Stainless steel

044.705

TE Profile drill short

Regular Neck, Length 28 mm, Ø 3.5 mm

Stainless steel

044.712

TE Profile drill long

Regular Neck, Length 37 mm, Ø 3.5 mm

Stainless steel

044.703

TE Profile drill short

Wide Neck, Length 28 mm, Ø 4.2 mm

Stainless steel

044.710

TE Profile drill long

Wide Neck, Length 37 mm, Ø 4.2 mm

Stainless steel

026.2303

BL/NNC Profile drill short

Length 26 mm, Ø 3.3 mm

Stainless steel

026.2306

BL/NNC Profile drill long

Length 35 mm, Ø 3.3 mm

Stainless steel

026.4303

BL Profile drill short

Length 26 mm, Ø 4.1 mm

Stainless steel

026.4306

BL Profile drill long

Length 35 mm, Ø 4.1 mm

Stainless steel

Profile drills

SURGERY SURGICAL INSTRUMENTS

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

026.6303

BL Profile drill short

Length 26 mm, Ø 4.8 mm

Stainless steel

026.6306

BL Profile drill long

Length 35 mm, Ø 4.8 mm

Stainless steel

044.575

S/SP Tap for adapter

Length 23 mm, Ø 3.3 mm

Stainless steel/PEEK

044.577

S/SP Tap for adapter

Length 23 mm, Ø 4.1 mm

Stainless steel/PEEK

044.579

S/SP Tap for adapter

Length 23 mm, Ø 4.8 mm

Stainless steel/PEEK

026.2310

BL/TE/NNC Tap for adapter

Length 23 mm, Ø 3.3 mm

Stainless steel/PEEK

026.4310

BL/TE Tap for adapter

Length 23 mm, Ø 4.1 mm

Stainless steel/PEEK

026.6310

BL/TE Tap for adapter

Length 23 mm, Ø 4.8 mm

Stainless steel/PEEK

046.458

Alignment pin straight

Length 28 mm, Ø 2.2 mm

046.455

Depth gauge with distance indicator

Length 27 mm, Ø 2.2/2.8 mm

046.450

Depth gauge

Length 26 mm, Ø 3.5 mm

046.451

Depth gauge

Length 26 mm, Ø 4.2 mm

Profile drills

SURGERY SURGICAL INSTRUMENTS

Taps

Alignment pin and depth gauges

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

044.304

RN Bone profiler for use with 049.082

Inner Ø 3.6/4.8 mm, Outer Ø 5.4 mm, Length 28 mm

Stainless steel

044.305

WN Bone profiler for use with 049.082

Inner Ø 3.6/6.5 mm, Outer Ø 7.2 mm, Length 25 mm

Stainless steel

049.082

Guide cylinder for implants Ø 3.3 mm and Ø 3.5 mm

Length 10.5 mm, Ø 3.6 mm

Stainless steel

Bone Profilers

SURGERY SURGICAL INSTRUMENTS Important Bone profilers cannot be used for Straumann ® Bone Level Implants. The SCS Guiding cylinder is intended for single use only. 52

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Material

040.330

Surgical instruments starter set, Ø 4.1 mm, Tap for adapter, for preparation using the handpiece, consisting of: 044.210 Pilot drill 1, short, Ø 2.2 mm 044.211 Pilot drill 1, long, Ø 2.2 mm 044.214 Pilot drill 2, short, Ø 2.8 mm 044.215 Pilot drill 2, long, Ø 2.8 mm 044.250 Twist drill PRO, short, Ø 3.5 mm 044.251 Twist drill PRO, long, Ø 3.5 mm 044.577 S/SP Tap for adapter, Ø 4.1 mm 046.458 Alignment pin, Ø 2.2 mm 046.455 Depth gauge with distance indicator, Ø 2.2/2.8 mm 046.450 Depth gauge for Standard and Standard Plus Implants Ø 4.1 mm

040.331

Surgical instruments starter set, Ø 4.8 mm, Tap for adapter, for preparation using the handpiece consisting of: 044.254 Twist drill PRO, short, Ø 4.2 mm 044.255 Twist drill PRO, long, Ø 4.2 mm 044.579 S/SP Tap for adapter, Ø 4.8 mm 046.451 Depth gauge for Standard and Standard Plus Implants Ø 4.8 mm

SURGERY SURGICAL INSTRUMENTS

Starter Sets: Starter sets contain instruments needed for placing Straumann ® Standard and Standard Plus implants

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

040.440S

Drill set short, drill stop compatible, for Ø 3.3 mm implant, single-patient use, sterile

Ø 2.2 mm, Ø 2.8 mm, Length 33 mm

Stainless steel

040.441S

Drill set long, drill stop compatible, for Ø 3.3 mm implant, single-patient use, sterile

Ø 2.2 mm, Ø 2.8 mm, Length 41 mm

Stainless steel

040.443S

Drill set short, drill stop compatible, for Ø 4.1 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Length

mm, mm, mm, 33 mm

Stainless steel

040.444S

Drill set long, drill stop compatible, for Ø 4.1 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Length

mm, mm, mm, 41 mm

Stainless steel

040.446S

Drill set short, drill stop compatible, for Ø 4.8 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Ø 4.2 Length

mm, mm, mm, mm, 33 mm

Stainless steel

040.447S

Drill set long, drill stop compatible, for Ø 4.8 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Ø 4.2 Length

mm, mm, mm, mm, 41 mm

Stainless steel

Single-patient drills (drill-stop compatible)

SURGERY SURGICAL INSTRUMENTS

Indication Single-patient drills are indicated for all implant bed preparation procedures with the Straumann ® Dental Implant System. They are supplied sterile-packed and must only be used for one patient and one surgery. Single-patient drills can minimize the infection risk for patients, and their color coding simplifies implant bed preparation.

Warning Single-patient drills cannot be resterilized! Resterilization renders these drills unusable. 54

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Material

Straumann ® Drill stop Drill stop kit 3 x drill stop 3 x drill stop 3 x drill stop 3 x drill stop 1 x drill stop

040.454S

Refill package: Drill stop set type A, for short drill 12 mm/long drill 16 mm, Ø 3.3/4.1/4.8 mm implants

Plastic

040.455S

Refill package: Drill stop set type B, for short drill 10 mm/long drill 14 mm, Ø 3.3/4.1/4.8 mm implants

Plastic

040.456S

Refill package: Drill stop set type C, for short drill 8 mm/long drill 12 mm, Ø 3.3/4.1/4.8 mm implants

Plastic

040.457S

Refill package: Drill stop set type D, for short drill 6 mm/long drill 10 mm, Ø 3.3/4.1/4.8 mm implants

Plastic

040.461

Drill stop aid

Plastic

set, set, set, set, aid

type type type type

A, B, C, D,

Plastic

SURGERY SURGICAL INSTRUMENTS

040.460

The Straumann ® Drill Stop provides precise control over drilling depth during implant bed preparation for the placement of Straumann ® dental implants. Delivered in sterile sets, the drill stops are ready to use. The Straumann ® Drill Stop is designed for single-patient use only and must be used in conjunction with the single-patient drills specifically designed for them.

Each Straumann ® Drill Stop set includes drill stops with the following diameters: Ø 2.2 mm (blue), Ø 2.8 mm (yellow), Ø 3.5 mm (red), Ø 4.2 mm (green). These diameters correspond to the diameters of the Straumann ® drills.

Important Straumann ® Drill stops are not indicated for: ● Extraction sites, where bone cavity is often wider than the diameter necessary to hold the Drill stop. ● Use with drill templates, due to the interference from or with the template.

SURGICAL INSTRUMENTS

IMPLANT BED PREPARATION INSTRUMENTS

Art. No.

Article

Dimensions

Material

040.400S

Drill set short, drill stop incompatible, for 3.3 mm implant, single-patient use, sterile

Ø 2.2 mm, Ø 2.8 mm, Length 33 mm

Stainless steel

040.401S

Drill set short, drill stop incompatible, for 3.3 mm implant, single-patient use, sterile

Ø 2.2 mm, Ø 2.8 mm, Length 41 mm

Stainless steel

040.403S

Drill set short, drill stop incompatible, for 4.1 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Length

mm, mm, mm, 33 mm

Stainless steel

040.404S

Drill set long, drill stop incompatible, for 4.1 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Length

mm, mm, mm, 41 mm

Stainless steel

040.406S

Drill set short, drill stop incompatible, for 4.8 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Ø 4.2 Length

mm, mm, mm, mm, 33 mm

Stainless steel

040.407S

Drill set long, drill stop incompatible, for 4.8 mm implant, single-patient use, sterile

Ø 2.2 Ø 2.8 Ø 3.5 Ø 4.2 Length

mm, mm, mm, mm, 41 mm

Stainless steel

Single-patient drills (drill-stop incompatible)

SURGERY SURGICAL INSTRUMENTS

Warning Single-patient drills cannot be resterilized! Resterilization renders these drills unusable. 56

SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

046.110

Instrument tweezers

Length 140 mm

Stainless steel

046.095

Tweezers with titanium plasmacoated tips

Length 105 mm

Stainless steel/Ti

046.057

Tweezers without titanium plasmacoated tips

Length 105 mm

Stainless steel

046.119

Ratchet includes service instrument

Length 84 mm

Stainless steel

046.108

Service instrument for ratchet

Length 50 mm

Stainless steel

045.111V4

Cleaning brush for ratchet

Length 100 mm, Ø 4.5 mm

Stainless steel/Nylon

046.049

Torque control device for ratchet

Length 82 mm

Stainless steel

046.064

Holding key

Length 85 mm

Stainless steel

026.2558

Release aid N for Loxim™

Length 90 mm

Stainless steel

026.4558

Release aid R/W for Loxim™

Length 90 mm

Stainless steel

046.460

Adapter for ratchet, extra short

Length 11 mm

Stainless steel

046.461

Adapter for ratchet, short

Length 18 mm

Stainless steel

046.462

Adapter for ratchet, long

Length 28 mm

Stainless steel

046.470

Adapter for handpiece, extra short

Length 19 mm

Stainless steel

046.471

Adapter for handpiece, short

Length 26 mm

Stainless steel

046.472

Adapter for handpiece, long

Length 34 mm

Stainless steel

SURGERY SURGICAL INSTRUMENTS

AUXILIARY INSTRUMENTS

SURGICAL INSTRUMENTS AUXILIARY INSTRUMENTS

Art. No.

Article

Dimensions

Material

046.400

SCS Screwdriver for ratchet, extra short

Length 15 mm

Cronidur ® 30

046.401

SCS Screwdriver for ratchet, short

Length 21 mm

Cronidur ® 30

046.402

SCS Screwdriver for ratchet, long

Length 27 mm

Cronidur ® 30

046.410

SCS Screwdriver for handpiece, extra short

Length 20 mm

Cronidur ® 30

046.411

SCS Screwdriver for handpiece, short

Length 26 mm

Cronidur ® 30

046.412

SCS Screwdriver for handpiece, long

Length 32 mm

Cronidur ® 30

046.421

Hexagonal screwdriver

Length 30 mm

Stainless steel

045.921

Light curette for implants (5 per pack)*

Screwdrivers

SURGERY SURGICAL INSTRUMENTS

* = See below for manufacturer details.

Manufacturer Kerr Hawe SA Zona Strecce CH-6934 Bioggio Switzerland The SCS Screwdrivers also act as inserting instruments for the WN Solid abutments, for all synOcta ® abutments, for all CrossFit ® prosthetic components as well as for all closure caps and healing caps in the Straumann ® Dental Implant System. 58

SURGICAL INSTRUMENTS SURGICAL CASSETTE

Art. No.

Article

Dimensions

Material

040.165

Straumann 速 Surgical cassette includes screw container 041.047, without instruments*

Length 290 mm, Width 175 mm, Height 62 mm

Plastic

041.047

Screw container with lid, for Straumann 速 surgical cassette, without screws

Length 69 mm, Width 47 mm, Height 29 mm

Plastic

Ultrasonic cleaning cassette

Length 150 mm, Width 65 mm, Height 25 mm

Plastic/ Silicone

Storage system for implants (SLA 速 / SLActive 速 ), incl. drawers and dividers

Length 226 mm, Width 280 mm, Height 248 mm

SURGERY SURGICAL INSTRUMENTS

Surgical cassette

Ultrasonic Cleaning Cassette 040.175

Storage system 041.500

* = For extra grommets, please contact your local Straumann sales representative.

SURGICAL INSTRUMENTS OSTEOTOMES

Art. No.

Article

Dimensions

Material

For bone condensation

SURGERY SURGICAL INSTRUMENTS

040.500

Osteotome instrument kit for bone condensation

046.500

Osteotome straight, for bone condensation

Ø 2.2 mm

Stainless steel

046.501

Osteotome straight, for bone condensation

Ø 2.8 mm

Stainless steel

046.502

Osteotome straight, for bone condensation

Ø 3.5 mm

Stainless steel

046.503

Osteotome straight, for bone condensation

Ø 4.2 mm

Stainless steel

046.510

Osteotome angled, for bone condensation

Ø 2.2 mm

Stainless steel

046.511

Osteotome angled, for bone condensation

Ø 2.8 mm

Stainless steel

046.512

Osteotome angled, for bone condensation

Ø 3.5 mm

Stainless steel

046.513

Osteotome angled, for bone condensation

Ø 4.2 mm

Stainless steel

046.550

Depth stop for osteotomes

Ø 2.2 mm

Ti/Stainless steel

046.551

Depth stop for osteotomes

Ø 2.8 mm

Ti/Stainless steel

The instruments and depth stops are also available individually. 60

Stainless steel/Plastic

SURGICAL INSTRUMENTS OSTEOTOMES

Art. No.

Article

Dimensions

Material

046.552

Depth stop for osteotomes

Ø 3.5 mm

Ti/Stainless steel

046.553

Depth stop for osteotomes

Ø 4.2 mm

Ti/Stainless steel

040.550

Cassette for bone condensation osteotomes, without content

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

SURGERY SURGICAL INSTRUMENTS

Stainless steel/Plastic

The instruments and depth stops are also available individually. 61

SURGICAL INSTRUMENTS OSTEOTOMES

Art. No.

Article

Dimensions

Material

For sinus floor elevation

SURGERY SURGICAL INSTRUMENTS

040.501

Osteotome instrument kit for sinus floor elevation

046.521

Osteotome straight, for sinus floor elevation

Ø 2.8 mm

Stainless steel

046.522

Osteotome straight, for sinus floor elevation

Ø 3.5 mm

Stainless steel

046.523

Osteotome straight, for sinus floor elevation

Ø 4.2 mm

Stainless steel

046.531

Osteotome angled, for sinus floor elevation

Ø 2.8 mm

Stainless steel

046.532

Osteotome angled, for sinus floor elevation

Ø 3.5 mm

Stainless steel

046.533

Osteotome angled, for sinus floor elevation

Ø 4.2 mm

Stainless steel

046.551

Depth stop for osteotomes

Ø 2.8 mm

Ti/ Stainless steel

046.552

Depth stop for osteotomes

Ø 3.5 mm

Ti/ Stainless steel

046.553

Depth stop for osteotomes

Ø 4.2 mm

Ti/ Stainless steel

040.560

Cassette for sinus floor elevation osteotomes, without content

048.350 048.350V4

SCS Occlusal screw

The instruments and depth stops are also available individually. 62

Stainless steel/ Plastic

Length 4.4 mm

SURGICAL INSTRUMENTS EXPLANTATION

Art. No.

Article

Dimensions

Material

044.330

Explantation drill short, for implants Ø 3.3 mm and Ø 3.5 mm

Length 32 mm, Inner Ø 3.6 mm, Outer Ø 4.2 mm

Stainless steel

044.331

Explantation drill medium, for implants Ø 3.3 mm and Ø 3.5 mm

Length 37.5 mm, Inner Ø 3.6 mm, Outer Ø 4.2 mm

Stainless steel

044.332

Explantation drill long, for implants Ø 3.3 mm and Ø 3.5 mm

Length 40.5 mm, Inner Ø 3.6 mm, Outer Ø 4.2 mm

Stainless steel

044.340

Explantation drill short, for implants Ø 4.1 mm

Length 32 mm, Inner Ø 4.2 mm, Outer Ø 4.8 mm

Stainless steel

044.341

Explantation drill medium, for implants Ø 4.1 mm

Length 37.5 mm, Inner Ø 4.2 mm, Outer Ø 4.8 mm

Stainless steel

044.342

Explantation drill long, for implants Ø 4.1 mm

Length 40.5 mm, Inner Ø 4.2 mm, Outer Ø 4.8 mm

Stainless steel

044.344

Explantation drill short, for implants Ø 4.8 mm

Length 32 mm, Inner Ø 4.9 mm, Outer Ø 5.5 mm

Stainless steel

044.345

Explantation drill medium, for implants Ø 4.8 mm

Length 37.5 mm, Inner Ø 4.9 mm, Outer Ø 5.5 mm

Stainless steel

044.346

Explantation drill long, for implants Ø 4.8 mm

Length 40.5 mm, Inner Ø 4.9 mm, Outer Ø 5.5 mm

Stainless steel

SURGERY SURGICAL INSTRUMENTS

Explantation drills

Important Explantation drills are intended for single use only. 63

SURGICAL INSTRUMENTS EXPLANTATION

Art. No.

Article

Dimensions

Material

Explantation aids: Explantation of S/SP/TE Implants without abutment

SURGERY SURGICAL INSTRUMENTS

049.082

Guide cylinder for implants Ø 3.3 mm and Ø 3.5 mm

Length 10.5 mm, Ø 3.6 mm

Stainless steel

049.083

Guide cylinder for implants Ø 4.1 mm

Length 10.5 mm, Ø 4.2 mm

Stainless steel

049.167

Guide cylinder for implants Ø 4.8 mm

Length 10.5 mm, Ø 4.9 mm

Stainless steel

049.182

SCS Guiding cylinder for implants Ø 3.3 mm Narrow Neck

Length 5 mm, Ø 3.6 mm

Ti/Stainless steel

049.360

SCS Guiding cylinder for implants Ø 3.3 mm Narrow Neck CrossFit ®

Length 10.1 mm, Ø 3.6 mm

Stainless steel

Explantation aids: Explantation of Bone Level Implants without abutment 026.2801

NC Guiding cylinder for explantation of Ø 3.3 mm Bone Level implants

Length 10.7 mm, Ø 3.6 mm

Stainless steel

026.4801

RC Guiding cylinder for explantation of Ø 4.1 mm Bone Level implants

Length 10.9 mm, Ø 4.2 mm

Stainless steel

026.6801

RC Guiding cylinder for explantation of Ø 4.8 mm Bone Level implants

Length 10.9 mm, Ø 4.9 mm

Stainless steel

Explantation aids: Explantation of S/SP/TE Implants with abutment 049.850

RN Guiding sleeve for implants, Ø 3.3 mm, cement-retained and screw-retained

Length 4.5 mm, Ø 3.6 mm

Stainless steel

049.071

RN Guiding sleeve for implants, Ø 4.1 mm and Ø 3.5 mm, cementretained and screwretained

Length 5.6 mm, Ø 4.2 mm

Stainless steel

049.851

RN Guiding sleeve for implants, Ø 4.8 mm, cement-retained and screw-retained

Length 6.4 mm, Ø 4.9 mm

Stainless steel

Important The explantation aids are intended for single use only. 64

SURGICAL INSTRUMENTS EXPLANTATION

Art. No.

Article

Dimensions

Material

Explantation aids: Explantation of S/SP/TE Implants with abutment 048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

049.181

SCS Occlusal screw long, for screw-retaining of guiding sleeves on an Octa, synOcta ® or cone abutment 15°

Length 7.6 mm

TAN

026.2048

48h Explantation device for Bone Level NC Implants

Ø 8 mm, Length 31.4 mm

Stainless steel

026.4048

48h Explantation device for Bone Level RC Implants

Ø 8 mm, Length 31.2 mm

Stainless steel

049.361

48h Explantation device for Soft Tissue Level NNC Implants

Ø 8 mm, Length 31.4 mm

Stainless steel

80103

48h Explantation device for Soft Tissue Level synOcta ® implants, short

Ø 8 mm, Length 20.6 mm

Stainless steel

80087

48h Explantation device for Soft Tissue Level synOcta ® implants, long

Ø 8 mm, Length 26.6 mm

Stainless steel

SURGERY SURGICAL INSTRUMENTS

Explantation devices

Important The explantation aids are intended for single use only. 65

STRAUMANN® GUIDED SURGERY gonyX™

Art. No.

Article

Dimensions

Material

034.056-04

Closing lid for sleeve positioner, for Ø 2.8 mm sleeves Set of 4

Ø 2.8 mm

PEEK

034.057

Sleeve positioner for gonyX™, for Ø 2.8 mm sleeves

Ø 2.8 mm

TAN

034.058-04

Closing lid for sleeve positioner, for Ø 5 mm sleeves, Set of 4

Ø 5 mm

PEEK

034.059

Sleeve positioner for gonyX™, for Ø 5 mm sleeves

Ø 5 mm

TAN

034.066

gonyX™ drill set

Ø Ø Ø Ø Ø

Stainless steel

gonyX™ consumables

SURGERY STRAUMANN ® GUIDED SURGERY

3.8 4.6 5.4 6.3 7.3

mm, mm, mm, mm, mm

Straumann ® Guided Surger y – Guided surger y kit and guided implants Please find more information on the Guided Surgery kit on p. 64 ff. Details on the guided implants can be found in the implant section on p. 19 ff. 66

STRAUMANN® GUIDED SURGERY gonyX™

Art. No.

Article

Dimensions

Material

034.061

Stepped drill for Ø 5 mm sleeves 034.053V4

Ø 6.3/7.3 mm

Stainless steel

034.060

Stepped drill for Ø 2.8 mm sleeves 034.055V4

Ø 3.8/4.6 mm

Stainless steel

034.050V4

Sleeve guided

Height 5 mm, Ø 5 mm

Stainless steel

034.052V4

Sleeve guided

Height 6 mm, Ø 2.8 mm

Stainless steel

034.053V4

T-sleeve guided

Height 5 mm, Ø 5 mm

Stainless steel

034.055V4

T-sleeve guided

Height 6 mm, Ø 2.8 mm

Stainless steel

gonyX™ consumables

SURGERY STRAUMANN ® GUIDED SURGERY

Sleeves for Straumann ® Guided Surgery

STRAUMANN® GUIDED SURGERY SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

034.010

Mucosa punch guided

Length 30 mm, Ø 3.4 mm

Stainless steel

034.011

Mucosa punch guided

Length 30 mm, Ø 4 mm

Stainless steel

034.012

Mucosa punch guided

Length 30 mm, Ø 4.7 mm

Stainless steel

034.215

Milling cutter guided

Length 32.5 mm, Ø 2.8 mm

Stainless steel

034.415

Milling cutter guided

Length 32.5 mm, Ø 3.5 mm

Stainless steel

034.615

Milling cutter guided

Length 32.5 mm, Ø 4.2 mm

Stainless steel

034.123

Pilot drill short, guided

Length 32 mm, Ø 2.2 mm

Stainless steel

034.126

Pilot drill long, guided

Length 36 mm, Ø 2.2 mm

Stainless steel

034.129

Pilot drill extra-long, guided

Length 40 mm, Ø 2.2 mm

Stainless steel

034.223

Twist drill PRO short, guided

Length 32 mm, Ø 2.8 mm

Stainless steel

034.226

Twist drill PRO long, guided

Length 36 mm, Ø 2.8 mm

Stainless steel

034.229

Twist drill PRO extra-long, guided

Length 40 mm, Ø 2.8 mm

Stainless steel

034.423

Twist drill PRO short, guided

Length 32 mm, Ø 3.5 mm

Stainless steel

034.426

Twist drill PRO long, guided

Length 36 mm, Ø 3.5 mm

Stainless steel

034.429

Twist drill PRO extra-long, guided

Length 40 mm, Ø 3.5 mm

Stainless steel

Guided mucosa punches

Guided milling cutters SURGERY STRAUMANN ® GUIDED SURGERY

Guided pilot drills

Guided twist drills

STRAUMANN® GUIDED SURGERY SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

034.623

Twist drill PRO short, guided

Length 32 mm, Ø 4.2 mm

Stainless steel

034.626

Twist drill PRO long, guided

Length 36 mm, Ø 4.2 mm

Stainless steel

034.629

Twist drill PRO extra-long, guided

Length 40 mm, Ø 4.2 mm

Stainless steel

SURGERY STRAUMANN ® GUIDED SURGERY

Guided twist drills

STRAUMANN® GUIDED SURGERY SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

034.235

SP Profile drill guided

Regular Neck, Length 35 mm, Ø 3.3 mm

Stainless steel

034.237

TE Profile drill guided

Regular Neck, Length 37 mm, Ø 3.3 mm

Stainless steel

026.2503

BL/NNC Profile drill guided

Length 37 mm, Ø 3.3 mm

Stainless steel

034.435

SP Profile drill guided

Regular Neck, Length 35 mm, Ø 4.1 mm

Stainless steel

034.437

TE Profile drill guided

Regular Neck, Length 37 mm, Ø 4.1 mm

Stainless steel

026.4503

BL Profile drill guided

Length 37 mm, Ø 4.1 mm

Stainless steel

026.6503

BL Profile drill guided

Length 37 mm, Ø 4.8 mm

Stainless steel

Guided profile drills

SURGERY STRAUMANN ® GUIDED SURGERY

Important Do not use SP Profile drills with Standard Plus Implants NNC Ø 3.3 mm or with Standard Plus Implants RN Ø 4.8 mm. For SP Implants NNC Ø 3.3 mm, use the 026.2510 BL/TE/NNC Tap for handpiece, guided, for pretapping the implant bed for NNC Implants.

STRAUMANN® GUIDED SURGERY SURGICAL INSTRUMENTS

Art. No.

Article

Dimensions

Material

034.245

S/SP Tap for handpiece, guided

Length 42 mm, Ø 3.3 mm

Stainless steel

026.2510

BL/TE/NNC Tap for handpiece, guided

Length 42 mm, Ø 3.3 mm

Stainless steel

034.445

S/SP Tap for handpiece, guided

Length 42 mm, Ø 4.1 mm

Stainless steel

026.4510

BL/TE Tap for handpiece, guided

Length 42 mm, Ø 4.1 mm

Stainless steel

034.645

S/SP Tap for handpiece, guided

Length 42 mm, Ø 4.8 mm

Stainless steel

026.6510

BL/TE Tap for handpiece, guided

Length 42 mm, Ø 4.8 mm

Stainless steel

SURGERY STRAUMANN ® GUIDED SURGERY

Guided taps

STRAUMANN® GUIDED SURGERY AUXILIARY INSTRUMENTS

Art. No.

Article

Dimensions

Material

034.150

Drill handle

Stop 1/3 mm, Ø 2.2 mm, Length 104 mm

Stainless steel

034.250

Drill handle

Stop 1/3 mm, Ø 2.8 mm, Length 104 mm

Stainless steel

034.450

Drill handle

Stop 1/3 mm, Ø 3.5 mm, Length 104 mm

Stainless steel

034.650

Drill handle

Stop 1/3 mm, Ø 4.2 mm, Length 104 mm

Stainless steel

034.750

C-handle H2

Stop 6 mm, Length 89 mm

Stainless steel

034.751

C-handle H4

Stop 4 mm, Length 89 mm

Stainless steel

034.752

C-handle H6

Stop 2 mm, Length 89 mm

Stainless steel

034.256

Template fixation pin guided

Ø 2.8/2.8 mm

Stainless steel

034.255

Template fixation pin guided

Ø 5/2.8 mm

Stainless steel

034.455

Template fixation pin guided

Ø 5/3.5 mm

Stainless steel

034.655

Template fixation pin guided

Ø 5/4.2 mm

Stainless steel

034.005

Connector for ratchet

Length 14 mm

Stainless steel

Auxiliary parts

SURGERY STRAUMANN ® GUIDED SURGERY

Stop key 034.006

Stop key

Stainless steel

STRAUMANN® GUIDED SURGERY

Art. No.

Article

Dimensions

Material

046.110

Instrument tweezers

Length 140 mm

Stainless steel

046.095

Tweezers with titanium plasmacoated tips

Length 105 mm

Stainless steel/Ti

046.057

Tweezers without titanium plasmacoated tips

Length 105 mm

Stainless steel

046.119

Ratchet includes service instrument

Length 84 mm

Stainless steel

046.108

Service instrument for ratchet

Length 50 mm

Stainless steel

045.111V4

Cleaning brush for ratchet

Length 100 mm, Ø 4.5 mm

Stainless steel/Nylon

046.049

Torque control device for ratchet

Length 82 mm

Stainless steel

046.064

Holding key

Length 85 mm

Stainless steel

046.460

Adapter for ratchet, extra short

Length 11 mm

Stainless steel

046.461

Adapter for ratchet, short

Length 18 mm

Stainless steel

046.462

Adapter for ratchet, long

Length 28 mm

Stainless steel

046.470

Adapter for handpiece, extra short

Length 19 mm

Stainless steel

046.471

Adapter for handpiece, short

Length 26 mm

Stainless steel

046.472

Adapter for handpiece, long

Length 34 mm

Stainless steel

SURGERY STRAUMANN ® GUIDED SURGERY

AUXILIARY INSTRUMENTS

STRAUMANN速 GUIDED SURGERY GUIDED SURGERY CASSETTE

Art. No.

Article

Dimensions

034.001

Surgical cassette for Straumann 速 Guided Surgery*

Length 290 mm, Width 175 mm, Height 62 mm

* = For extra grommets, please contact your local Straumann sales representative.

SURGERY STRAUMANN 速 GUIDED SURGERY 74

Material

Cassettes, inserts and storage system

Prosthetic instruments

Prosthetics for Straumann® Standard, Standard Plus and Tapered Effect Implants ● Prosthetic planning aids ● Straumann ® CARES ® Implant-borne prosthetics ● Crowns and bridges ● Hybrid dentures

79 83 88 120

Prosthetics for Straumann® Bone Level Implants ● Prosthetic planning aids ● Straumann ® CARES ® Implant-borne prosthetics ● Crowns and bridges ● Hybrid dentures

141 148 152 185

Straumann® Classic

205

PROSTHETICS

CASSETTES, INSERTS AND STORAGE SYSTEM

PROSTHETICS CASSETTES, INSERTS AND STORAGE SYSTEM

Art. No.

Article

Dimensions

Material

040.185

Prosthetic cassette for instruments and auxiliary components, complete (without dividers)

Length 224 mm, Width 115 mm, Height 20 mm

Anodized Al

041.022

Prosthetic cassette for instruments and auxiliary components

Length 224 mm, Width 115 mm, Height 20 mm

Anodized Al

041.211

Tray for cassette 041.022

Length 218 mm, Width 109 mm, Height 16 mm

Anodized Al

041.612

Divider large, for dish 041.440

Length 47.5 mm, Width 9.5 mm, Height 1 mm

Anodized Al

041.615

Divider small, for dish 041.440

Length 27.5 mm, Width 9.5 mm, Height 1 mm

Anodized Al

041.440

Dish for tray 041.211

Length 56 mm, Width 31 mm, Height 11 mm

Anodized Al

041.412

Calibration cup yellow

Ă&#x2DC; 80 mm

Anodized Al

Plexiglass cassette/ Membranette

Length 150 mm, Width 100 mm

Plastic

Storage system for prosthetics incl. drawers and dividers

Length 226 mm, Width 280 mm, Height 248 mm

Auxiliary parts 140.055

Storage system 041.501

Art. No.

Article

Dimensions

Material

046.400

SCS Screwdriver for ratchet, extra short

Length 15 mm

Cronidur ® 30

046.401

SCS Screwdriver for ratchet, short

Length 21 mm

Cronidur ® 30

046.402

SCS Screwdriver for ratchet, long

Length 27 mm

Cronidur ® 30

046.085

Screwdriver handle for 046.410/411/412

Length 109 mm

Stainless steel/PEEK

046.410

SCS Screwdriver for handpiece, extra short

Length 20 mm

Cronidur ® 30

046.411

SCS Screwdriver for handpiece, short

Length 26 mm

Cronidur ® 30

046.412

SCS Screwdriver for handpiece, long

Length 32 mm

Cronidur ® 30

046.067

Solid abutment driver for RN Solid abutments 6°, short

Length 13 mm

Stainless steel

046.068

Solid abutment driver for RN Solid abutments 6°, long

Length 19 mm

Stainless steel

046.069

Retentive anchor driver

Length 19 mm

Stainless steel

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

PROSTHETICS PROSTHETIC INSTRUMENTS

PROSTHETIC INSTRUMENTS

PROSTHETICS PROSTHETIC INSTRUMENTS

Art. No.

Article

Dimensions

Material

046.119

Ratchet includes service instrument

Length 84 mm

Stainless steel

046.108

Service instrument for ratchet

Length 50 mm

Stainless steel

046.049

Torque control device for ratchet

Length 82 mm

Stainless steel

045.111V4

Cleaning brush for ratchet

Length 100 mm, Ø 4.5 mm

Stainless steel/Nylon

046.239

Analog holder

Length 105 mm

Al/Steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.237

NNC Reamer for 45° shoulder

Ø 8 mm, Length 17 mm

Carbide metal

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.246

Guide pin for reamer 046.243, for synOcta ® 048.605

Length 50 mm

Stainless steel

046.241

synOcta ® Guide pin for reamer 046.243, for synOcta ® 1.5 abutments

Length 50 mm

Stainless steel

046.247

synOcta ® Guide pin for reamer 046.243, for synOcta ® 048.606

Length 50 mm

Al/Ti

046.249

NNC Guide pin for reamer 046.237

Length 50 mm

Stainless steel

The SCS Screwdrivers also act as inserting instruments for the WN Solid abutments, for all synOcta ® abutments, for all CrossFit ® prosthetic components as well as for all closure caps and healing caps in the Straumann ® Dental Implant System. 78

PROSTHETIC PLANNING AIDS

Art. No.

Article

Material

048.904

Soft Tissue Level PLAN Set contents: 048.935V4, 048.936V4, 048.937V4, 048.275V4, 048.276V4, 048.277V4, 048.278V4, 048.279V4, 048.280V4, 048.916V4, 048.917V4, 048.918V4, 048.919V4, 048.920V4, 048.921V4, 048.922V4, 048.923V4, 048.924V4, 048.925V4, 048.926V4, 048.927V4, 048.928V4, 048.929V4, 048.930V4, 048.931V4, 048.932V4, 048.933V4, 048.934V4, 048.283V4, 048.284V4, 048.285V4, 048.286V4, 048.287V4, 048.938V4, 048.939V4

048.901

Prosthetic planning kit contents: 6 x 048.920, 6 x 048.929, 6 x 048.921, 6 x 048.916, 6 x 048.923, 6 x 048.917, 6 x 048.918, 6 x 048.919, 6 x 048.922, 6 x 048.924, 6 x 048.925, 6 x 048.930, 6 x 048.931, 6 x 048.932, 6 x 048.933, 6 x 048.934, 6 x 048.926, 6 x 048.927, 6 x 048.928, 6 x 048.935, 6 x 048.936, 6 x 048.937

048.905

Soft Tissue Level PLAN Cassette empty

PC PROSTHETICS PROSTHETIC PLANNING AIDS

Prosthetic planning kit

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

048.929V4

RN synOcta ® 1.5 screw-retained PLAN abutment

Height 1.5 mm

POM

048.921V4

RN synOcta ® Transversal PLAN abutment

Height 4 mm

POM

048.916V4

RN synOcta ® 15° angled PLAN abutment type A

Height 5.7 mm

POM

048.917V4

RN synOcta ® 15° angled PLAN abutment type B

Height 5.7 mm

POM

048.918V4

RN synOcta ® 20° angled PLAN abutment type A

Height 5.7 mm

POM

048.919V4

RN synOcta ® 20° angled PLAN abutment type B

Height 5.7 mm

POM

048.922V4

RN synOcta ® 15° angled PLAN abutment type A

Height 6.7 mm

POM

048.923V4

RN synOcta ® 15° angled PLAN abutment type B

Height 6.7 mm

POM

048.924V4

RN synOcta ® 20° angled PLAN abutment type A

Height 6.7 mm

POM

048.925V4

RN synOcta ® 20° angled PLAN abutment type B

Height 6.7 mm

POM

048.930V4

RN synOcta ® Cementable PLAN abutment

Height 5.5 mm

POM

048.931V4

WN synOcta ® 1.5 screw-retained PLAN abutment

Height 1.5 mm

POM

048.932V4

WN synOcta ® Cementable PLAN abutment

Height 5.5 mm

POM

048.933V4

WN synOcta ® 15° angled PLAN abutment type A

Height 5.5 mm

POM

048.934V4

WN synOcta ® 15° angled PLAN abutment type B

Height 5.5 mm

POM

048.943V4

NNC PLAN Cementable abutment, straight, for crown/bridge

Height 5.7 mm

POM

048.944V4

NNC PLAN Cementable abutment, angled 15°, type A

Height 5.9 mm

POM

PLAN abutments

PROSTHETICS PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

048.945V4

NNC PLAN Cementable abutment, angled 15°, type B

Height 5.9 mm

POM

048.946V4

NNC PLAN Locator ® Abutment

Height 1 mm

POM

048.947V4

NNC PLAN Locator ® Abutment

Height 2 mm

POM

048.948V4

NNC PLAN Locator ® Abutment

Height 3 mm

POM

048.949V4

NNC PLAN Locator ® Abutment

Height 4 mm

POM

048.950V4

NNC PLAN Locator ® Abutment

Height 5 mm

POM

048.951V4

NNC PLAN Locator ® Abutment

Height 6 mm

POM

048.952V4

NNC PLAN Solid abutment

Height 4 mm

POM

048.953V4

NNC PLAN Solid abutment

Height 5.5 mm

POM

048.954V4

NNC PLAN Solid abutment

Height 7 mm

POM

048.926V4

RN PLAN Solid abutment

Height 4 mm

POM

048.927V4

RN PLAN Solid abutment

Height 5.5 mm

POM

048.928V4

RN PLAN Solid abutment

Height 7 mm

POM

048.275V4

RN PLAN LOCATOR ® Abutment

Height 1 mm

POM

048.276V4

RN PLAN LOCATOR ® Abutment

Height 2 mm

POM

048.277V4

RN PLAN LOCATOR ® Abutment

Height 3 mm

POM

048.278V4

RN PLAN LOCATOR ® Abutment

Height 4 mm

POM

048.279V4

RN PLAN LOCATOR ® Abutment

Height 5 mm

POM

048.280V4

RN PLAN LOCATOR ® Abutment

Height 6 mm

POM

048.938V4

WN PLAN Solid abutment 6°

Height 4 mm

POM

048.939V4

WN PLAN Solid abutment 6°

Height 5.5 mm

POM

PROSTHETICS PROSTHETIC PLANNING AIDS

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

048.283V4

WN PLAN LOCATOR ® Abutment

Height 1 mm

POM

048.284V4

WN PLAN LOCATOR ® Abutment

Height 2 mm

POM

048.285V4

WN PLAN LOCATOR ® Abutment

Height 3 mm

POM

048.286V4

WN PLAN LOCATOR ® Abutment

Height 4 mm

POM

048.287V4

WN PLAN LOCATOR ® Abutment

Height 5 mm

POM

PROSTHETICS PROSTHETIC PLANNING AIDS Important These prosthetic planning aids can be used in the mouth and are sterilizable up to 20 times. Take care to prevent aspiration in the patient by securing the PLAN abutment with the SCS Screwdriver.

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS SOFT TISSUE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Straumann® CARES ® CADCAM offers you a range of implant-borne prosthetic solutions in order to achieve highquality dental implant restorations. Straumann® CARES ® implant-borne elements are designed for high reliability and predictability. All implant-borne prosthetic solutions can be ordered via Straumann® CARES ® Visual software. Straumann® CARES ® Abutments can also be ordered via the Straumann® CARES ® Scan & Shape service. Straumann® CARES ® Abutments For customized patient solutions For cement-retained crowns and bridges via mesostructure For screw-retained crowns (ceramic abutments only) Available in two different materials: titanium and ceramic Characteristics Customized shape and emergence profile Control over cement gap PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

Proven Straumann precision fit Straumann® CARES ® Screw-retained Bridges and Bars For complex customized patient solutions For screw-retained bridges For bars (Dolder ®, MP-Clip ®, Ackermann®, round) In two different materials: titanium Grade 4 and cobaltchromium alloy (coron®) Characteristics Direct connection to the implant, no additional abutment needed High precision

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS SOFT TISSUE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Straumann® CARES ® Variobase™ Coping To allow Straumann dental restorations on competitive implant systems By maintaining the genuine abutment-implant connection For dental restorations on Camlog ® and NobelReplace ® implants Available in zerion®

Characteristics Customized shape and emergence profile Proven Straumann precision fit Process description 1. For appropriate scanner and software compatibility, please ask your local Straumann sales representative. 2. The model situation is scanned with the Straumann ® CARES ® Scan CS2 scanner. 3. The prosthetic part of the abutment is designed with Straumann® CARES ® Visual. 4. The data generated is sent to the Straumann milling center via the Straumann® CARES ® Visual software or the Straumann® CARES ® Webshop (for abutments only – PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

http://cares.straumann.com). 5. The customized abutment is manufactured at the Straumann milling center. 6. Express delivery to the dental laboratory in just a few working days.

All final abutments are permanently screwed into the implant at 35 Ncm. Straumann ® CARES ® implant-borne prosthetics and Straumann ® CARES ® Scan & Shape service may not be available in your country. For further information, please ask your local Straumann sales representative. 84

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS SOFT TISSUE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Art. No.

Article

Dimensions

Material

048.354 048.354V4*

RN Occlusal screw for ceramic only

Length 5 mm

TAN

048.356*

synOcta ® Basal screw

Length 6.7 mm

TAN

048.088 048.088-04

RN Wax-up sleeve for single use

Length 19.3 mm

PEEK

048.068

RN Straumann ® Scanbody includes fixation screw, for Straumann ® CARES ® es1 scanner and Straumann ® CARES ® Scan CS2 scanner, for software version CARES ® Visual 6.2 and lower

Length 8.5 mm

PEEK/Ti

048.168

CARES ® RN Mono Scanbody includes fixation screw

Ø 4.8 mm, Height 10 mm

PEEK/TAN

048.085V4

RN Scanbody for Sirona ® System

Length 11.7 mm, Ø 4.8 mm

ABS

048.129

RN Repositionable implant analog for fully digital and conventional workflow

Length 17.6 mm

Stainless steel

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

Regular Neck

* = For individual ordering only in cases where the screw supplied is lost.

For further information and the webshop, refer to http://cares.straumann.com. Straumann ® CARES ® Abutments may not be available in your country. 85

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS SOFT TISSUE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Art. No.

Article

Dimensions

Material

048.356*

synOcta ® Basal screw

Length 6.7 mm

TAN

048.089 048.089-04

WN Wax-up sleeve for single use

Length 16.4 mm

PEEK

048.069

WN Straumann ® Scanbody includes fixation screw, for Straumann ® CARES ® es1 scanner and Straumann ® CARES ® Scan CS2 scanner, for software version CARES ® Visual 6.2 and lower

Length 8.9 mm

PEEK/Ti

048.169

CARES ® WN Mono Scanbody includes fixation screw

Ø 6.5 mm, Height 10 mm

PEEK/TAN

048.086V4

WN Scanbody for Sirona ® System

Length 11.8 mm, Ø 6.5 mm

ABS

048.172

WN Repositionable implant analog for fully digital and conventional workflow

Length 17.8 mm

Stainless steel

Wide Neck

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

* = For individual ordering only in cases where the screw supplied is lost.

For further information and the webshop, refer to http://cares.straumann.com. Straumann ® CARES ® Abutments may not be available in your country. 86

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS SOFT TISSUE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Art. No.

Article

Dimensions

Material

Wax-up kits Straumann ® CARES ® Waxup kit contains wax-up sleeve holders for Straumann dental restorations on Straumann implants

019.0050

Straumann ® CARES ® Waxup kit for Camlog ® contains wax-up sleeve holders for Straumann dental restorations on Camlog ® implants

019.0051

Straumann ® CARES ® Waxup kit for NobelReplace™ contains wax-up sleeve holders for Straumann dental restorations on NobelReplace ® implants

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

019.0063

For further information and the webshop, refer to http://cares.straumann.com. Straumann ® CARES ® Abutments may not be available in your country. 87

CROWNS AND BRIDGES

NARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEM IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 048.128

NNC Impression post for open tray

Height 10.1 mm

TAN

048.134

NNC Impression post for closed tray

Height 10.9 mm

POM/TAN

048.127

NNC Implant analog

Length 12.5 mm

048.501

NNC Post for temporary restoration, for crown

Height 10.3 mm

TAN

048.502

NNC Post for temporary restoration, for bridge

Height 10.3 mm

TAN

048.699

NNC Temporary Abutment VITA CAD-Temp ®

Height 10 mm, Ø 5 mm

PMMA/TAN

048.313

NNC Basal screw

Length 7.1 mm

TAN

048.314

NNC Basal screw for cementable abutment

Length 7.1 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

048.960V4

NNC Bite registration aid

Height 8 mm

POM

048.961V4

NNC Bite registration aid

Height 12 mm

POM

Temporary restoration

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

Important The temporary abutment is screwed into the implant at 15–35 Ncm. Important NNC prosthetic components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants. Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

CROWNS AND BRIDGES

NARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEM CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

048.598

NNC Cementable abutment straight, for crown and bridge

Height 5.7 mm

048.621

NNC Cementable abutment angled 15°, type A

Height 5.9 mm

048.622

NNC Cementable abutment angled 15°, type B

Height 5.9 mm

048.256

NNC Plastic coping for cementable abutment, straight, for crown

Height 7 mm

POM

048.257

NNC Plastic coping for cementable abutment, straight, for bridge

Height 7 mm

POM

048.258

NNC Plastic coping for cementable abutment, angled 15°, for crown and bridge

Height 7.2 mm

POM

048.314

NNC Basal screw for cementable abutment

Length 7.1 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

Cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

Burn-out copings

Auxiliary parts

Important NNC Cementable abutments are permanently screwed into the implant at 35 Ncm. Important NNC prosthetic components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants. Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

CROWNS AND BRIDGES

NARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEM CEMENTABLE ABUTMENT, ANGLED 15° NNC Cementable angled 15° abutments are for cement-retained crowns and bridges Two types of NNC Cementable angled 15° abutments are available, type A and type B. This enables the axis to be corrected in 8 different alignments (in 45° graduations). The NNC Cementable angled 15° abutments: Can undergo height adjustment, but a minimum height of 3 mm above the mucosa margin of the abutment must be maintained to ensure proper stability and retention of the

A = angle between flat sides

restoration. Must not be cemented into the implant. Are permanently screwed into the implant at 35 Ncm; use a new basal screw for the final insertion of the abutment. Cannot be tightened/loosened with the extra short SCS Screwdriver.

Note 1. Not suitable for direct ceramic veneering. 2. The cement margin must not be more than 2 mm below the mucosa. 3. NNC components can only be used with Straumann® PROSTHETICS CROWNS AND BRIDGES

Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information.

B = angle to the flat wall

CROWNS AND BRIDGES

NARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEM GOLD ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 048.592

NNC Gold abutment for crown

Height 3.6 mm

Ceramicor ® / TAN/POM

048.593

NNC Gold abutment for bridge

Height 3.6 mm

Ceramicor ® / TAN/POM

048.313

NNC Basal screw

Length 7.1 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

Ceramicor ® is a non-oxidizing precious metal alloy for casting on precious metal alloys.

The NNC abutments are permanently screwed into the implant at 35 Ncm. Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

CROWNS AND BRIDGES

NARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEM VARIOBASE™ ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 048.709

NNC Variobase™ Abutment with screw

Ø 3.9 mm, Height 3.75 mm

TAN

048.267 048.267V4

NNC Burn-out coping for Variobase™ Abutment

Ø 3.9 mm, Height 11.1 mm

POM

048.173

CARES ® NNC Mono Scanbody includes fixation screw

Ø 3.5 mm, Height 10 mm

PEEK/TAN

048.313*

NNC Basal screw

Length 7.1 mm

TAN

* = For individual ordering only in cases where the screw supplied is lost.

PROSTHETICS CROWNS AND BRIDGES Important NNC Variobase™ Abutments are permanently screwed into the implant at 35 Ncm.

Important NNC prosthetic components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants. Note Variobase™ Abutment may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information. The digital workflow using the CARES ® NNC Mono Scanbody requires a compatible dental software containing the Variobase™ Implant Kit. Please check with your local sales representative for more information.

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 048.017V4

RN Impression cap

Height 8 mm

POM

048.070V4

RN synOcta ® Positioning cylinder red

Height 12 mm

POM

048.010

RN synOcta ® Impression post screw-retained, with integral guide screw

Height 10 mm

Al/Ti

048.090

RN synOcta ® Impression post with integral guide screw

Height 21 mm

Al/Ti

048.124

RN synOcta ® analog gray with red stripe

Length 12 mm

Stainless steel

048.129

RN Repositionable implant analog for fully digital and conventional workflow

Length 17.6 mm

Stainless steel

048.940V4

Bite registration aid short

Height 8 mm, Ø 5 mm

POM

048.941V4

Bite registration aid long

Height 12 mm, Ø 5 mm

POM

PROSTHETICS CROWNS AND BRIDGES

Bite registration

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 93

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

048.668

RN synOcta ® Temporary Meso abutment includes basal screw*

Length 10 mm

PEEK/TAN

048.664

RN Temporary Abutment VITA CAD-Temp ®

Height 10 mm, Ø 7 mm

PMMA/TAN

048.356**

synOcta ® Basal screw

Length 6.7 mm

TAN

048.715

RN synOcta ® Post for temporary restorations, for crown

Height 9 mm

048.716

RN synOcta ® Post for temporary restorations, for bridge

Height 9 mm

049.181

SCS Occlusal screw long, for screw-retaining of guiding sleeves on an Octa, synOcta ® or cone abutment 15°

Length 7.6 mm

TAN

* = Available separately under Art. No. 048.356 ** = For individual ordering only in cases where the screw supplied is lost.

PROSTHETICS CROWNS AND BRIDGES Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 94

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) 1.5 ABUTMENT

Art. No.

Article

Dimensions

Material

048.601

RN synOcta ® 1.5 screwretained abutment

Height 1.5 mm

TAN

048.632

RN synOcta ® Gold coping for synOcta ® 1.5 (includes modeling aid), bridge

Height 4.25/ 12 mm, Alloy weight 0.33 g

Ceramicor ® / POM

048.633

RN synOcta ® Gold coping for synOcta ® 1.5 (includes modeling aid), crown

Height 4.25/ 12 mm, Alloy weight 0.36 g

Ceramicor ® / POM

048.227

RN synOcta ® Plastic coping for synOcta ® 1.5, bridge/bar

Height 10 mm

POM

048.229

RN synOcta ® Plastic coping for synOcta ® 1.5, crown

Height 10 mm

POM

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.241

synOcta ® Guide pin for reamer 046.243, for synOcta ® 1.5 abutments

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.245

Polishing protector for RN synOcta ® Copings, transocclusal screw-retained

Length 15 mm

Stainless steel

046.239

Analog holder

Length 105 mm

Al/Steel

Screw-retained restorations

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

The RN synOcta ® 1.5 abutment is permanently screwed into the implant at 35 Ncm.

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 95

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) 1.5 ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 048.571

RN synOcta ® Meso milling cylinder for synOcta ® 1.5, crown

Height 10 mm, Ø 8 mm

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

048.642

RN synOcta ® Gold abutment crown, (includes basal screw 048.356)

Height 4.3 mm, Alloy weight 0.61 g

Ceramicor ® / POM

048.356

synOcta ® Basal screw

Length 6.7 mm

TAN

PROSTHETICS CROWNS AND BRIDGES The RN synOcta ® 1.5 abutment is permanently screwed into the implant at 35 Ncm.

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 96

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) 1.5 ABUTMENT

Art. No.

Article

Dimensions

Material

048.601

RN synOcta ® 1.5 screwretained abutment

Height 1.5 mm

TAN

048.240

RN synOcta ® Milling cylinder for synOcta ® 1.5, crown

Height 8 mm, Ø 6 mm

048.241

RN synOcta ® Milling cylinder for synOcta ® 1.5, bridge

Height 8 mm, Ø 6 mm

048.362V4

SCS Guide screw for 048.240/241, cannot be shortened

Length 8 mm

048.363V4

SCS Guide screw for 048.240/241, can be shortened by 2 mm

Length 8 mm

PROSTHETICS CROWNS AND BRIDGES

Tapered crowns and bridges of titanium

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 97

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

048.605

RN synOcta ® Cementable abutment for crowns and bridges

Height 5.5 mm

048.662

RN synOcta ® Plastic coping for 048.605, bridge

Height 7 mm

POM

048.663

RN synOcta ® Plastic coping for 048.605, crown

Height 7 mm

POM

048.059V4

Transfer aid for 048.605

Height 6.5 mm

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.246

Guide pin for reamer 046.243, for synOcta ® 048.605

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

Cement-retained restorations

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

The RN synOcta ® cementable abutment is permanently screwed into the implant at 35 Ncm.

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 98

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) 15° AND 20° ANGLED ABUTMENT

Art. No.

Article

Dimensions

Material

048.612

RN synOcta ® 15° angled abutment short, type A

Height 5.7 mm

Ti/TAN

048.613

RN synOcta ® 15° angled abutment short, type B

Height 5.7 mm

Ti/TAN

048.617

RN synOcta ® 20° angled abutment short, type A

Height 5.7 mm

Ti/TAN

048.618

RN synOcta ® 20° angled abutment short, type B

Height 5.7 mm

Ti/TAN

048.610

RN synOcta ® 15° angled abutment long, type A

Height 6.7 mm

Ti/TAN

048.611

RN synOcta ® 15° angled abutment long, type B

Height 6.7 mm

Ti/TAN

048.615

RN synOcta ® 20° angled abutment long, type A

Height 6.7 mm

Ti/TAN

048.616

RN synOcta ® 20° angled abutment long, type B

Height 6.7 mm

Ti/TAN

048.670

Extension shell for short and long RN synOcta ® 15° and 20° angled abutments

Height 5.5 mm

POM

048.676V4

Plastic shoulder for short and long RN synOcta ® 15° and 20° angled abutments

Height 4 mm

POM

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

048.000V4

Transfer aid for RN synOcta ® 15° and 20° angled abutments, short

Height 5.5 mm

048.002V4

Transfer aid for RN synOcta ® 15° and 20° angled abutments, long

Height 5.5 mm

PROSTHETICS CROWNS AND BRIDGES

Screw-retained or cement-retained restorations

Auxiliary parts

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 99

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)

RN synOcta ® 15° and 20° angled abutments for screw-retained and cement-retained crowns and bridges Important Due to their design, angled abutments must not be trimmed or individually modified. Abutments must not be cemented into the implant. In the case of the angled abutments, 2 types are available for each angle. This enables the axis to be corrected in 16 different alignments.

A = angle to the edge

The RN synOcta angled abutments are permanently ®

screwed into the implant at 35 Ncm. Angled abutments must not be used with 15° angled hollow cylinder Straumann implants. Angled abutments cannot be tightened/loosened with the extra short SCS Screwdriver. Important RN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with a Ø 4.8 mm Regular Neck.

PROSTHETICS CROWNS AND BRIDGES 100

B = angle to the surface

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) TRANSVERSAL (TS) ABUTMENT

Art. No.

Article

Dimensions

Material

048.620

RN synOcta ® Transversal (TS) screw-retained abutment

Height 4 mm

048.634

RN synOcta ® TS gold coping

Height 5.4 mm, Alloy weight 0.96 g

Ceramicor ®

048.665

RN synOcta ® TS plastic coping

Height 5.4 mm, Alloy weight 0.21 g

Ceramicor ® / POM

048.672

RN synOcta ® TS thread protection screw for 048.634 and 048.665

Length 8.2 mm, Ø 3 mm

Stainless steel

049.154

Transversal screw for 048.620

Length 3 mm, Ø 2 mm

TAV

046.420

TS Hexagonal screwdriver

Length 24 mm

Stainless steel

048.003V4

Transfer aid for RN synOcta ® TS abutment

Height 5 mm

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

044.570

Tap for transversal screw retention

M2 x 0.25 mm

Stainless steel

046.239

Analog holder

Length 105 mm

Al/Steel

Screw-retained restorations

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

The RN synOcta ® TS abutment is permanently screwed into the implant at 35 Ncm. The transversal screw is tightened only by hand. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 101

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm) VARIOBASE™ ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 048.710

RN Variobase™ Abutment with screw

Ø 5.05 mm, Height 4 mm

TAN

048.268 048.268V4

RN Burn-out coping for Variobase™ Abutment

Ø 5.05 mm, Height 11.1 mm

POM

048.168

CARES ® RN Mono Scanbody includes fixation screw

Ø 4.8 mm, Height 10 mm

PEEK/TAN

048.356*

synOcta ® Basal screw

Length 6.7 mm

TAN

* = For individual ordering only in cases where the screw supplied is lost.

PROSTHETICS CROWNS AND BRIDGES Important RN Variobase™ Abutments are permanently screwed into the implant at 35 Ncm.

Important RN prosthetic components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. Note Variobase™ Abutment may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information. The digital workflow using the CARES ® RN Mono Scanbody requires a compatible dental software containing the Variobase™ Implant Kit. Please check with your local sales representative for more information.

102

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 048.013

WN Impression cap

Height 8 mm

POM

048.095

WN synOcta ® positioning cylinder white

Height 12 mm

POM

048.091

WN synOcta ® impression cap screw-retained, with integral guide screw

Height 10 mm

048.171

WN synOcta ® analog gray

Length 12 mm

Stainless steel

048.172

WN Repositionable implant analog for fully digital and conventional workflow

Length 17.8 mm

Stainless steel

048.940V4

Bite registration aid short

Height 8 mm, Ø 5 mm

POM

048.941V4

Bite registration aid long

Height 12 mm, Ø 5 mm

POM

048.717

WN synOcta ® Post for temporary restorations, for crown

Height 9 mm

048.718

WN synOcta ® Post for temporary restorations, for bridge

Height 9 mm

049.181

SCS Occlusal screw long, for screw-retaining of guiding sleeves on an Octa, synOcta ® or cone abutment 15°

Length 7.6 mm

TAN

PROSTHETICS CROWNS AND BRIDGES

Bite registration

Temporary restoration

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 103

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) 1.5 ABUTMENT

Art. No.

Article

Dimensions

Material

048.603

WN synOcta ® 1.5 screwretained abutment

Height 1.5 mm

TAN

048.638

WN synOcta ® Gold coping for synOcta ® 1.5 (includes modeling aid), bridge

Height 4.75/ 12 mm, Alloy weight 0.86 g

Ceramicor ® / POM

048.639

WN synOcta ® Gold coping for synOcta ® 1.5 (includes modeling aid), crown

Height 4.75/ 12 mm, Alloy weight 0.87 g

Ceramicor ® / POM

048.666

WN synOcta ® Plastic coping bridge

Height 10 mm

POM

048.667

WN synOcta ® Plastic coping crown

Height 10 mm

POM

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

Screw-retained restorations

Screw-retained or cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

048.644

WN synOcta ® Gold abutment crown, (includes basal screw 048.356)

Height 4.2 mm, Alloy weight 0.78 g

Ceramicor ® / POM

048.573

WN synOcta ® Meso milling cylinder for synOcta ® 1.5, crown

Height 10 mm, Ø 10 mm

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

The WN synOcta ® 1.5 abutment is permanently screwed into the implant at 35 Ncm. Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 104

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) 1.5 ABUTMENT

Art. No.

Article

Dimensions

Material

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.241

synOcta ® Guide pin for reamer 046.243, for synOcta ® 1.5 abutments

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

048.606

WN synOcta ® cementable abutment

Height 5.5 mm

048.243

WN synOcta ® Plastic coping for 048.606, crown

Height 7.35 mm

POM

048.244

WN synOcta ® Plastic coping for 048.606, bridge

Height 7.35 mm

POM

048.054V4

Transfer aid for 048.606

Height 6.5 mm

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.247

synOcta ® Guide pin for reamer 046.243, for synOcta ® 048.606

Length 50 mm

Al/Ti

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

Cement-retained restorations

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

The WN synOcta ® cementable abutment is permanently screwed into the implant at 35 Ncm.

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 106

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) 15° ANGLED ABUTMENT

Art. No.

Article

Dimensions

Material

048.608

WN synOcta ® 15° angled abutment type A

Height 5.5 mm

Ti/TAN

048.609

WN synOcta ® 15° angled abutment type B

Height 5.5 mm

Ti/TAN

Plastic shoulder for WN synOcta ® 15° angled abutments

Height 4 mm

POM

Transfer aid for WN synOcta ® 15° angled abutments

Height 5 mm

Cement-retained restorations 048.678

048.032

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

107

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)

Important Abutments must not be cemented into the implant. Two types of angled WN abutments are available. This allows correction of the axis in 16 different directions. Angled abutments cannot be tightened/loosened with the extra short SCS Screwdriver. The WN synOcta ® angled abutments are screwed definitively into the implant at 35 Ncm. Important WN components can only be used with Straumann

A = angle to the edge ®

Standard, Standard Plus and Tapered Effect implants with a Ø 6.5 mm Wide Neck.

B = angle to the surface

PROSTHETICS CROWNS AND BRIDGES 108

CROWNS AND BRIDGES

synOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm) VARIOBASE™ ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 048.711

WN Variobase™ Abutment with screw

Ø 7 mm, Height 4.5 mm

TAN

048.269 048.269V4

WN Burn-out coping for Variobase™ Abutment

Ø 7 mm, Height 11.1 mm

POM

048.169

CARES ® WN Mono Scanbody includes fixation screw

Ø 6.5 mm, Height 10 mm

PEEK/TAN

048.356*

synOcta ® Basal screw

Length 6.7 mm

TAN

PROSTHETICS CROWNS AND BRIDGES

* = For individual ordering only in cases where the screw supplied is lost.

Important WN Variobase™ Abutments are permanently screwed into the implant at 35 Ncm.

Important WN prosthetic components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. Note Variobase™ Abutment may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information. The digital workflow using the CARES ® WN Mono Scanbody requires a compatible dental software containing the Variobase™ Implant Kit. Please check with your local sales representative for more information.

109

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)

Art. No.

Article

Dimensions

Material

048.547

NNC Solid abutment yellow

Height 4 mm

048.548

NNC Solid abutment gray

Height 5.5 mm

048.549

NNC Solid abutment blue

Height 7 mm

048.155

NNC Solid abutment driver short

Length 13 mm

Stainless steel

048.156

NNC Solid abutment driver long

Length 19 mm

Stainless steel

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES NNC Solid abutments are permanently screwed into the implant at 35 Ncm and must not be removed after the impression has been taken. Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

110

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication NNC Impression cap

Height 8 mm

POM

048.587

NNC Positioning cylinder for 048.547, yellow

Height 10.2 mm

POM

048.588

NNC Positioning cylinder for 048.548, gray

Height 10.2 mm

POM

048.589

NNC Positioning cylinder for 048.549, blue

Height 10.2 mm

POM

048.527

NNC Analog for Solid abutment for 048.547, yellow

Height 14.3 mm

TAN

048.528

NNC Analog for Solid abutment for 048.548, gray

Height 15.8 mm

TAN

048.529

NNC Analog for Solid abutment for 048.549, blue

Height 17.3 mm

TAN

PROSTHETICS CROWNS AND BRIDGES

048.579

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

111

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)

Art. No.

Article

Dimensions

Material

048.658

NNC Temporary coping for Solid abutment, crown

Height 8.5 mm

PMMA

048.659

NNC Temporary coping for Solid abutment, bridge

Height 8.5 mm

PMMA

048.700

NNC Protective cap for Solid abutment, for 048.547

Height 5.6 mm

PEEK

048.701

NNC Protective cap for Solid abutment, for 048.548

Height 7.1 mm

PEEK

048.702

NNC Protective cap for Solid abutment, for 048.549

Height 8.6 mm

PEEK

Temporary restoration

PROSTHETICS CROWNS AND BRIDGES Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

112

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)

Art. No.

Article

Dimensions

Material

Components for cement-retained crowns and bridges 048.263

NNC Plastic coping for Solid abutment, crown

Height 10.2 mm

POM

048.264

NNC Plastic coping for Solid abutment, bridge

Height 10.2 mm

POM

046.237

NNC Reamer for 45° shoulder

Ø 8 mm, Length 17 mm

Carbide metal

046.249

NNC Guide pin for reamer 046.237

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

113

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)

Art. No.

Article

Dimensions

Material

040.740

RN Solid All-in-One Set for crown

Height 4 mm

040.741

RN Solid All-in-One Set for crown

Height 5.5 mm

040.742

RN Solid All-in-One Set for crown

Height 7 mm

040.840

RN Solid All-in-One Set for bridge

Height 4 mm

040.841

RN Solid All-in-One Set for bridge

Height 5.5 mm

040.842

RN Solid All-in-One Set for bridge

Height 7 mm

048.540

RN Solid abutment 6° yellow

Height 4 mm

048.541

RN Solid abutment 6° gray

Height 5.5 mm

048.542

RN Solid abutment 6° blue

Height 7 mm

046.067

Solid abutment driver for RN Solid abutments 6°, short

Length 13 mm

Stainless steel

046.068

Solid abutment driver for RN Solid abutments 6°, long

Length 19 mm

Stainless steel

All-in-One Sets

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

RN Solid abutments are permanently screwed into the implant at 35 Ncm and must not be removed after the impression has been taken. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 114

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 048.017V4

RN Impression cap

Height 8 mm

POM

048.060V4

Positioning cylinder for 048.540, yellow

Height 10.2 mm

POM

048.061V4

Positioning cylinder for 048.541, gray

Height 10.2 mm

POM

048.062V4

Positioning cylinder for 048.542, blue

Height 10.2 mm

POM

048.160

Analog for 048.540, yellow

Length 14.3 mm

048.161

Analog for 048.541, gray

Length 15.8 mm

048.162

Analog for 048.542, blue

Length 17.3 mm

048.117V4

Shoulder analog for RN Solid abutments, with reinforcement pin

Length 10 mm, Length 17 mm

PPS/Brass

048.654

RN Temporary coping for RN Solid abutments, bridge

Height 8.5 mm

PMMA

048.655

RN Temporary coping for RN Solid abutments, crown

Height 8.5 mm

PMMA

048.047V4

RN Protective cap for solid abutment 048.540, cementable

Height 5.8 mm

PEEK

048.048V4

RN Protective cap for solid abutment 048.541, cementable

Height 7.3 mm

PEEK

048.049V4

RN Protective cap for solid abutment 048.542, cementable

Height 8.8 mm

PEEK

PROSTHETICS CROWNS AND BRIDGES

Temporary restoration

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 115

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)

Art. No.

Article

Dimensions

Material

Components for cement-retained crowns and bridges 048.245

Plastic coping for RN Solid abutments, crown

Height 10 mm

POM

048.246

Plastic coping for RN Solid abutments, bridge

Height 10 mm

POM

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.242

Guide pin for reamer 046.243, for RN Solid abutments

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 116

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)

Art. No.

Article

Dimensions

Material

040.845

WN Solid All-in-One Set for bridge

Height 4 mm

040.846

WN Solid All-in-One Set for bridge

Height 5.5 mm

040.745

WN Solid All-in-One Set for crown

Height 4 mm

040.746

WN Solid All-in-One Set for crown

Height 5.5 mm

048.545

WN Solid abutment 6° green

Height 4 mm

048.546

WN Solid abutment 6° brown

Height 5.5 mm

All-in-One Sets

048.013

WN Impression cap

Height 8 mm

POM

048.065

Positioning cylinder for 048.545, green

Height 10 mm

POM

048.066

Positioning cylinder for 048.546, brown

Height 10 mm

POM

048.165

Analog for 048.545, green

Length 16 mm

048.166

Analog for 048.546, brown

Length 17.5 mm

048.140

Shoulder analog for WN Solid abutments

Length 10 mm

PROSTHETICS CROWNS AND BRIDGES

Impression taking and master cast fabrication

The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 54 and 73) prior to impression taking, and tightened definitively at 35 Ncm. They must not be removed from the implant after the impression has been taken. Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 117

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)

Art. No.

Article

Dimensions

Material

048.656

WN Temporary coping for WN Solid abutments, bridge

Height 7.3 mm

PMMA

048.657

WN Temporary coping for WN Solid abutments, crown

Height 7.3 mm

PMMA

048.242

WN Temporary Abutment VITA CAD-Temp ®

Height 10 mm, Ø 10 mm

PMMA/TAN

048.051

WN Protective cap for 048.545

Height 6 mm

PEEK

048.052

WN Protective cap for 048.546

Height 7.5 mm

PEEK

Temporary restoration

PROSTHETICS CROWNS AND BRIDGES The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 54 and 73) prior to impression taking, and tightened definitively at 35 Ncm. They must not be removed from the implant after the impression has been taken. Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 118

CROWNS AND BRIDGES

SOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)

Art. No.

Article

Dimensions

Material

Components for cement-retained crowns and bridges 048.247

Plastic coping for WN Solid abutments, crown

Height 7 mm

POM

048.248

Plastic coping for WN Solid abutments, bridge

Height 7 mm

POM

046.243

Reamer for 45° shoulder

Ø 8 mm

Carbide metal

046.244

Guide pin for reamer 046.243, for WN Solid abutments

Length 50 mm

Stainless steel

046.240

Handle for reamers and tap for TS

Length 65 mm

Steel/Brass

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 119

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) BAR

Art. No.

Article

Dimensions

Material

048.601

RN synOcta ® 1.5 screwretained abutment

Height 1.5 mm

TAN

048.204

RN synOcta ® Gold coping for synOcta ® 1.5, bar

Height 5.8 mm, Alloy weight 0.77 g

Ceramicor ®

048.411

Dolder ® bar egg-shaped cross-section, mini

Length 25 mm, Height 2.3 mm

Elitor ®

048.412

Dolder ® bar egg-shaped cross-section, regular

Length 25 mm, Height 3 mm

Elitor ®

048.413

Dolder ® bar matrix includes spacer, mini

Length 25 mm, Height 2.75 mm

Elitor ® /Brass

048.414

Dolder ® bar matrix includes spacer, regular

Length 25 mm, Height 3.5 mm

Elitor ® /Brass

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

040.195

Bar set gold includes: 2 x RN synOcta ® 1.5 abutment, 048.601 2 x RN synOcta ® analog, 048.124 2 x RN synOcta ® gold coping, bar, 048.204 4 x SCS Occlusal screw, 048.350

Components for gold bars

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

For matching guide screws see page 136. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 120

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) BAR

Art. No.

Article

Dimensions

Material

048.208V4

Stabilization pin for retaining gold copings in solder investment

Length 11 mm

Stainless steel

046.150

Activator set for all bar matrices, threepart

Length 50 mm

Stainless steel

046.151

Deactivator for Dolder ® bar matrices, mini

Length 66 mm

Grilon BS/ Brass

046.152

Deactivator for Dolder ® bar matrices, regular

Length 66 mm

Grilon BS/ Brass

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

Auxiliary parts

For matching guide screws see page 136. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 121

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) BAR

Art. No.

Article

Dimensions

Material

048.601

RN synOcta ® 1.5 screwretained abutment

Height 1.5 mm

TAN

Components for titanium bars, prefabricated titanium parts for laser welding RN synOcta ® Titanium coping for synOcta ® 1.5, bar

Height 6 mm

048.466

Titanium bar egg-shaped cross-section, mini

Length 50 mm, Height 2.3 mm

048.465

Titanium bar egg-shaped cross-section, regular

Length 50 mm, Height 3 mm

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

040.196

Bar set titanium includes: 2 x RN synOcta ® 1.5 abutment, 048.601 2 x RN synOcta ® analog, 048.124 2 x RN synOcta ® titanium coping, bar, 048.214 2 x SCS Occlusal screw, 048.350

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

048.214

For matching guide screws see page 136. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 122

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) BAR

Art. No.

Article

Dimensions

Material

048.227

RN synOcta ® Plastic coping for synOcta ® 1.5, bridge/bar

Height 10 mm

POM

048.461

Plastic bar egg-shaped cross-section, mini

Length 80 mm, Height 2.3 mm

PMMA

048.460

Plastic bar egg-shaped cross-section, regular

Length 80 mm, Height 3 mm

PMMA

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

040.197

Bar set plastic includes: 2 x RN synOcta ® 1.5 abutment, 048.601 2 x RN synOcta ® analog, 048.124 2 x RN synOcta ® plastic coping, bar, 048.227 2 x SCS Occlusal screw, 048.350

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

Plastic components for one-piece casting method for bars

For matching guide screws see page 136. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 123

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) BAR

Art. No.

Article

Dimensions

Material

046.245

Polishing protector for RN synOcta ® Copings, transocclusal screw-retained

Length 15 mm

Stainless steel

048.108

RN synOcta ® Analog for bars with 048.601, onepart

Length 11.5 mm

Stainless steel

048.093V4

RN synOcta ® Impression cap for bars with 048.601, onepart, gray

Height 5 mm

POM

048.073V4

Fixation pin for bars with 048.601, gray

Length 5 mm

POM

046.239

Analog holder

Length 105 mm

Al/Steel

Auxiliary parts

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 124

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) RETENTIVE ANCHOR

Art. No.

Article

Dimensions

Material

048.439

Retentive anchor abutment

Height 3.4 mm

046.069

Retentive anchor driver

Length 19 mm

Stainless steel

048.109

Transfer pin for retentive anchor

Length 18 mm

Stainless steel

048.456

Elliptical matrix includes lamella retention insert

Height 3.2 mm, Ø 3.6 mm

Elitor ® /Ti

048.457

Spare lamella retention insert

Height 2.6 mm

Elitor ®

046.154

Screwdriver

Length 37 mm

Stainless steel

048.450

Titanium matrix for retentive anchor

Height 3.1 mm

Ti alloy

048.451V4

Spacer for titanium matrix

Height 3.5 mm

POM

048.452

Screwdriver for titanium matrix

Length 50 mm

Stainless steel

048.453

Extractor for titanium matrix

Length 100 mm

Stainless steel

048.454V4

Threaded mounting ring for titanium matrix

Height 2.2 mm

POM

048.455V4

Spring for 048.450

Elliptical matrix

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

Titanium matrix with defined retention force

Stainless steel

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 125

HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.581

NNC LOCATOR ® Abutment

Height 1 mm

TAV

048.582

NNC LOCATOR ® Abutment

Height 2 mm

TAV

048.583

NNC LOCATOR ® Abutment

Height 3 mm

TAV

048.584

NNC LOCATOR ® Abutment

Height 4 mm

TAV

048.585

NNC LOCATOR ® Abutment

Height 5 mm

TAV

048.586

NNC LOCATOR ® Abutment

Height 6 mm

TAV

LOCATOR ® abutments

PROSTHETICS HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm) 0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

Note NNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local Straumann sales representative for more information.

126

HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

LOCATOR ® components LOCATOR ® Male processing package contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male (height 1.9 mm), block-out spacer (048.196), clear replacement male (048.190), pink replacement male (048.191), blue replacement male (048.192)

Ti/Nylon

048.190V4

LOCATOR ® Replacement male clear, 0°–10°•, 5 lbs, 2.27 kg••

Height 1.7 mm

Nylon

048.191V4

LOCATOR ® Replacement male pink, light retention, 0°–10°•, 3 lbs, 1.36 kg••

Height 1.7 mm

Nylon

048.192V4

LOCATOR ® Replacement male blue, extra-light retention, 0°–10°•, 1.5 lbs, 0.68 kg••

Height 1.7 mm

Nylon

PROSTHETICS HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)

048.189V2

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

127

HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

LOCATOR ® components

PROSTHETICS HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)

048.182V2

LOCATOR ® Male processing package extended range, contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male (height 1.9 mm), block-out spacer (048.196), green replacement male (048.193), orange replacement male (048.188), red replacement male (048.194)

Ti/Nylon

048.193V4

LOCATOR ® Replacement male green, extended range, 10°–20°•, 4 lbs, 1.82 kg••

Height 1.7 mm

Nylon

048.188V4

LOCATOR ® Replacement male orange, light retention, extended range, 10°–20°•, 2 lbs, 0.91 kg••

Height 1.7 mm

Nylon

048.194V4

LOCATOR ® Replacement male red, extra-light retention, extended range, 10°–20°•, 1 lbs, 0.45 kg••

Height 1.7 mm

Nylon

048.181V4

LOCATOR ® Replacement male gray, extended range, zero (0) retention

Height 1.7 mm

Nylon

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

128

HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.198V4

LOCATOR ® Female analog

Length 10 mm, Ø 5 mm

048.197V4

LOCATOR ® Impression coping

Height 4 mm

Al housing with LDPE insert

048.196V20

LOCATOR ® Block-out spacer

Thickness 0.4 mm

Silicone rubber

048.195V4

LOCATOR ® Black processing male

Height 1.9 mm

LDPE

048.218V4

LOCATOR ® Processing spacer

POM

046.413V4

LOCATOR ® Abutment holder sleeve

PSU

LOCATOR ® components

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

048.199V4

LOCATOR ® Parallel post

Length 8 mm

LDPE

048.200

LOCATOR ® Angle measurement guide

Length 50 mm, Width 15 mm

Stainless steel

0473

PROSTHETICS HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)

Auxiliary parts

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NNC components can only be used with Straumann ® Standard Plus Narrow Neck CrossFit ® Ø 3.5 mm Implants.

129

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.175

RN LOCATOR ® Abutment

Height 1 mm

TAV

048.176

RN LOCATOR ® Abutment

Height 2 mm

TAV

048.177

RN LOCATOR ® Abutment

Height 3 mm

TAV

048.178

RN LOCATOR ® Abutment

Height 4 mm

TAV

048.179

RN LOCATOR ® Abutment

Height 5 mm

TAV

048.180

RN LOCATOR ® Abutment

Height 6 mm

TAV

LOCATOR ® abutments

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) 0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 130

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

Ti/Nylon

048.190V4

LOCATOR ® Replacement male clear, 0°–10°•, 5 lbs, 2.27 kg••

Height 1.7 mm

Nylon

048.191V4

LOCATOR ® Replacement male pink, light retention, 0°–10°•, 3 lbs, 1.36 kg••

Height 1.7 mm

Nylon

048.192V4

LOCATOR ® Replacement male blue, extra-light retention, 0°–10°•, 1.5 lbs, 0.68 kg••

Height 1.7 mm

Nylon

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

048.189V2

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 131

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

LOCATOR ® components

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

048.182V2

Ti/Nylon

048.193V4

LOCATOR ® Replacement male green, extended range, 10°–20°•, 4 lbs, 1.82 kg••

Height 1.7 mm

Nylon

048.188V4

LOCATOR ® Replacement male orange, light retention, extended range, 10°–20°•, 2 lbs, 0.91 kg••

Height 1.7 mm

Nylon

048.194V4

LOCATOR ® Replacement male red, extra-light retention, extended range, 10°–20°•, 1 lbs, 0.45 kg••

Height 1.7 mm

Nylon

048.181V4

LOCATOR ® Replacement male gray, extended range, zero (0) retention

Height 1.7 mm

Nylon

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 132

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.198V4

LOCATOR ® Female analog

Length 10 mm, Ø 5 mm

048.197V4

LOCATOR ® Impression coping

Height 4 mm

Al housing with LDPE insert

048.196V20

LOCATOR ® Block-out spacer

Thickness 0.4 mm

Silicone rubber

048.195V4

LOCATOR ® Black processing male

Height 1.9 mm

LDPE

048.218V4

LOCATOR ® Processing spacer

POM

046.413V4

LOCATOR ® Abutment holder sleeve

PSU

LOCATOR ® components

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

048.199V4

LOCATOR ® Parallel post

Length 8 mm

LDPE

048.200

LOCATOR ® Angle measurement guide

Length 50 mm, Width 15 mm

Stainless steel

0473

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

Auxiliary parts

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

133

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) SFI-ANCHOR®

Art. No.

Article

Dimensions

Material

045.025

CD20 SFI-Anchor ® Abutment, Div. 20°

Height 2 mm, Ø 5.3 mm

Titanium grade 5

045.026

RN SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 1 mm

Titanium grade 5/ POM

045.027

RN SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 2 mm

Titanium grade 5/ POM

045.028

RN SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 3 mm

Titanium grade 5/ POM

045.029

RN SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 4 mm

Titanium grade 5/ POM

045.030

RN SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 5 mm

Titanium grade 5/ POM

045.031

RN SFI-Anchor ® Abutment, Div. 20°

Height 1 mm

Titanium grade 5

045.032

RN SFI-Anchor ® Abutment, Div. 20°

Height 2 mm

Titanium grade 5

045.033

RN SFI-Anchor ® Abutment, Div. 20°

Height 3 mm

Titanium grade 5

045.034

RN SFI-Anchor ® Abutment, Div. 20°

Height 4 mm

Titanium grade 5

045.035

RN SFI-Anchor ® Abutment, Div. 20°

Height 5 mm

Titanium grade 5

045.046V2

SFI-Anchor ® Basic set 2x Retention insert extralow, low, medium, 2x Housing, 2x Block-out spacer

Ti/Pekkton ® / POM

045.047V4

SFI-Anchor ® Retention insert, extra-low

Pekkton ®

045.048V4

SFI-Anchor ® Retention insert, low

Pekkton ®

045.049V4

SFI-Anchor ® Retention insert, medium

Pekkton ®

Auxiliary parts

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

134

HYBRID DENTURES (REGULAR NECK Ø 4.8 mm) SFI-ANCHOR®

Article

Dimensions

Material

045.050V4

SFI-Anchor ® Retention insert, strong

Pekkton ®

045.051

SFI-Anchor ® Retention insert, Elitor ®

Elitor ®

045.052V4

SFI-Anchor ® Spacer for use in the dental lab

POM

045.053V4

SFI-Anchor ® Block-out spacer for use in the dental office

Silicone

045.054V4

SFI-Anchor ® Impression part

POM

045.055V4

SFI-Anchor ® Analog

Titanium grade 5

045.056

RN SFI-Anchor ® Abutment planner

POM

045.062

RC SFI-Anchor ® Abutment planner

POM

045.057

SFI-Anchor ® Aligner

POM

045.058

SFI-Anchor ® Tool

Titanium grade 5

045.059

SFI-Anchor ® Screwdriver

Sandvik

045.060

SFI-Anchor ® Instrument set 4x Impression part, 4x Analog, 2x Abutment planner, 1x Tool, 1x Screwdriver

045.061V4

SFI-Anchor ® Housing

PROSTHETICS HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)

Art. No.

Titanium grade 5

Manufacturer Cendres+Métaux SA Rue de Boujean 122 CH-2501 Biel (Suisse). SFI-Anchor ® is designed and manufactured by Cendres+Métaux and is exclusively distributed by lnstitut Straumann AG, Basel. Important RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 4.8 mm Regular Neck. 135

HYBRID DENTURES (WIDE NECK Ø 6.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.183

WN LOCATOR ® Abutment

Height 1 mm

TAV

048.184

WN LOCATOR ® Abutment

Height 2 mm

TAV

048.185

WN LOCATOR ® Abutment

Height 3 mm

TAV

048.186

WN LOCATOR ® Abutment

Height 4 mm

TAV

048.187

WN LOCATOR ® Abutment

Height 5 mm

TAV

LOCATOR ® abutments

PROSTHETICS HYBRID DENTURES (WIDE NECK Ø 6.5 mm) 0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 136

HYBRID DENTURES (WIDE NECK Ø 6.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

Ti/Nylon

048.190V4

LOCATOR ® Replacement male clear, 0°–10°•, 5 lbs, 2.27 kg••

Height 1.7 mm

Nylon

048.191V4

LOCATOR ® Replacement male pink, light retention, 0°–10°•, 3 lbs, 1.36 kg••

Height 1.7 mm

Nylon

048.192V4

LOCATOR ® Replacement male blue, extra-light retention, 0°–10°•, 1.5 lbs, 0.68 kg••

Height 1.7 mm

Nylon

PROSTHETICS HYBRID DENTURES (WIDE NECK Ø 6.5 mm)

048.189V2

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 137

HYBRID DENTURES (WIDE NECK Ø 6.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

LOCATOR ® components

PROSTHETICS HYBRID DENTURES (WIDE NECK Ø 6.5 mm)

048.182V2

Ti/Nylon

048.193V4

LOCATOR ® Replacement male green, extended range, 10°–20°•, 4 lbs, 1.82 kg••

Height 1.7 mm

Nylon

048.188V4

LOCATOR ® Replacement male orange, light retention, extended range, 10°–20°•, 2 lbs, 0.91 kg••

Height 1.7 mm

Nylon

048.194V4

LOCATOR ® Replacement male red, extra-light retention, extended range, 10°–20°•, 1 lbs, 0.45 kg••

Height 1.7 mm

Nylon

048.181V4

LOCATOR ® Replacement male gray, extended range, zero (0) retention

Height 1.7 mm

Nylon

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 138

HYBRID DENTURES (WIDE NECK Ø 6.5 mm) LOCATOR®

Art. No.

Article

Dimensions

Material

048.198V4

LOCATOR ® Female analog

Length 10 mm, Ø 5 mm

048.197V4

LOCATOR ® Impression coping

Height 4 mm

Al housing with LDPE insert

048.196V20

LOCATOR ® Block-out spacer

Thickness 0.4 mm

Silicone rubber

048.195V4

LOCATOR ® Black processing male

Height 1.9 mm

LDPE

048.218V4

LOCATOR ® Processing spacer

POM

046.413V4

LOCATOR ® Abutment holder sleeve

PSU

LOCATOR ® components

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

048.199V4

LOCATOR ® Parallel post

Length 8 mm

LDPE

048.200

LOCATOR ® Angle measurement guide

Length 50 mm, Width 15 mm

Stainless steel

0473

PROSTHETICS HYBRID DENTURES (WIDE NECK Ø 6.5 mm)

Auxiliary parts

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect Implants with a Ø 6.5 mm Wide Neck. 139

AUXILIARY PARTS

Art. No.

Article

Dimensions

Material

048.350 048.350V4

SCS Occlusal screw

Length 4.4 mm

048.360V4

SCS Guide screw for RN synOcta 速 bar copings, cannot be shortened

Length 6 mm

048.361V4

SCS Guide screw for RN synOcta 速 bar copings, can be shortened by 1.6 mm

Length 6 mm

048.362V4

SCS Guide screw for 048.240/241, cannot be shortened

Length 8 mm

048.363V4

SCS Guide screw for 048.240/241, can be shortened by 2 mm

Length 8 mm

048.364V4

SCS Guide screw can be shortened by 2 mm

Length 10 mm

048.365V4

SCS Guide screw can be shortened by 2 mm

Length 12 mm

048.366V4

SCS Guide screw can be shortened by 2 mm

Length 14 mm

SCS occlusal and guide screws

PROSTHETICS AUXILIARY PARTS

140

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

026.0101

Bone Level PLAN set*

Length 278 mm, Width 124 mm, Height 33 mm

PC/POM

026.0102

Bone Level PLAN cassette empty

Length 278 mm, Width 124 mm, Height 33 mm

025.2601-04

NC PLAN Anatomic abutment straight

Gingiva height 2 mm

POM

025.2602-04

NC PLAN Anatomic abutment straight

Gingiva height 3.5 mm

POM

025.2603-04

NC PLAN Anatomic abutment angled 15°

Gingiva height 2 mm

POM

025.2604-04

NC PLAN Anatomic abutment angled 15°

Gingiva height 3.5 mm

POM

025.4601-04

RC PLAN Anatomic abutment straight

Gingiva height 2 mm

POM

025.4602-04

RC PLAN Anatomic abutment straight

Gingiva height 3.5 mm

POM

025.4603-04

RC PLAN Anatomic abutment angled 15°

Gingiva height 2 mm

POM

025.4604-04

RC PLAN Anatomic abutment angled 15°

Gingiva height 3.5 mm

POM

025.2610-04

NC PLAN Gold abutment for crown

Height 3.2 mm

POM

025.4610-04

RC PLAN Gold abutment for crown

Height 3.3 mm

POM

025.4630-04

RC PLAN Gold abutment for bridge

Height 5.2 mm

POM

PLAN set

PROSTHETICS PROSTHETIC PLANNING AIDS

PLAN abutments

* = Contains all PLAN abutments

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

141

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

025.2611-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 1 mm, Abutment height 4 mm

POM

025.2612-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 2 mm, Abutment height 4 mm

POM

025.2613-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 3 mm, Abutment height 4 mm

POM

025.2615-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

POM

025.2616-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

POM

025.2617-04

NC PLAN Cementable abutment

Ø 3.5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

POM

025.2621-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 4 mm

POM

025.2622-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 4 mm

POM

025.2623-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 4 mm

POM

025.2625-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

POM

025.2626-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

POM

025.2627-04

NC PLAN Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

POM

PLAN abutments

PROSTHETICS PROSTHETIC PLANNING AIDS

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

142

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

025.4621-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 4 mm

POM

025.4622-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 4 mm

POM

025.4623-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 4 mm

POM

025.4625-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

POM

025.4626-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

POM

025.4627-04

RC PLAN Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

POM

025.4631-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 1 mm, Abutment height 4 mm

POM

025.4632-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 2 mm, Abutment height 4 mm

POM

025.4633-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 3 mm, Abutment height 4 mm

POM

025.4635-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

POM

025.4636-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

POM

025.4637-04

RC PLAN Cementable abutment

Ø 6.5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

POM

PROSTHETICS PROSTHETIC PLANNING AIDS

PLAN abutments

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

143

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

025.2651-04

NC PLAN Multi-base abutment straight

Ø 3.5 mm, Gingiva height 1 mm

POM

025.2652-04

NC PLAN Multi-base abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

POM

025.2654-04

NC PLAN Multi-base abutment straight

Ø 3.5 mm, Gingiva height 4 mm

POM

025.2656-04

NC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

POM

025.2657-04

NC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

POM

025.2659-04

NC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

POM

025.2662-04

NC PLAN Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

POM

025.2665-04

NC PLAN Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

POM

025.2648-04

NC PLAN Screwretained abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

POM

025.2650-04

NC PLAN Screwretained abutment straight

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.2655-04

NC PLAN Screwretained abutment angled 17°, Type A

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.2658-04

NC PLAN Screwretained abutment angled 17°, Type B

Ø 4.6 mm, Gingiva height 2.5 mm

POM

PLAN abutments

PROSTHETICS PROSTHETIC PLANNING AIDS

144

PROSTHETIC PLANNING AIDS

Article

Dimensions

Material

025.2653-04

NC PLAN Screwretained abutment angled 30°, Type A

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.2660-04

NC PLAN Screwretained abutment angled 30°, Type B

Ø 4.6 mm, Gingiva height 2.5 mm

POM

PROSTHETICS PROSTHETIC PLANNING AIDS

Art. No.

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

145

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

025.4651-04

RC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

POM

025.4652-04

RC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

POM

025.4654-04

RC PLAN Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

POM

025.4656-04

RC PLAN Multi-base abutment straight

Ø 6.5 mm, Gingiva height 1 mm

POM

025.4657-04

RC PLAN Multi-base abutment straight

Ø 6.5 mm, Gingiva height 2.5 mm

POM

025.4659-04

RC PLAN Multi-base abutment straight

Ø 6.5 mm, Gingiva height 4 mm

POM

025.4662-04

RC PLAN Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

POM

025.4665-04

RC PLAN Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

POM

025.4648-04

RC PLAN Screwretained abutment straight

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.4649-04

RC PLAN Screwretained abutment angled 17°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.4650-04

RC PLAN for Screwretained abutment, angled 17°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.4653-04

RC PLAN Screwretained abutment angled 30°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

POM

025.4660-04

RC PLAN Screwretained abutment angled 30°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

POM

PLAN abutments

PROSTHETICS PROSTHETIC PLANNING AIDS

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

146

PROSTHETIC PLANNING AIDS

Art. No.

Article

Dimensions

Material

025.2642-04

NC PLAN LOCATOR ® Abutment

Height 2 mm

POM

025.2643-04

NC PLAN LOCATOR ® Abutment

Height 3 mm

POM

025.2644-04

NC PLAN LOCATOR ® Abutment

Height 4 mm

POM

025.2645-04

NC PLAN LOCATOR ® Abutment

Height 5 mm

POM

025.2646-04

NC PLAN LOCATOR ® Abutment

Height 6 mm

POM

025.4641-04

RC PLAN LOCATOR ® Abutment

Height 1 mm

POM

025.4642-04

RC PLAN LOCATOR ® Abutment

Height 2 mm

POM

025.4643-04

RC PLAN LOCATOR ® Abutment

Height 3 mm

POM

025.4644-04

RC PLAN LOCATOR ® Abutment

Height 4 mm

POM

025.4645-04

RC PLAN LOCATOR ® Abutment

Height 5 mm

POM

025.4646-04

RC PLAN LOCATOR ® Abutment

Height 6 mm

POM

PROSTHETICS PROSTHETIC PLANNING AIDS

PLAN abutments

Important PLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.

147

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS BONE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Straumann® CARES ® CADCAM offers you a range of implant-borne prosthetic solutions in order to achieve highquality dental implant restorations. Straumann® CARES ® implant-borne elements are designed for high reliability and predictability. All implant-borne prosthetic solutions can be ordered via Straumann® CARES ® Visual software. Straumann® CARES ® Abutments can also be ordered via the Straumann® CARES ® Scan & Shape service. Straumann® CARES ® Abutments For customized patient solutions For cement-retained crowns and bridges via mesostructure For screw-retained crowns (ceramic abutments only) Available in two different materials: titanium and ceramic Characteristics Customized shape and emergence profile Control over cement gap Proven Straumann precision fit PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

Straumann® CARES ® Screw-retained Bridges and Bars For complex customized patient solutions For screw-retained bridges For bars (Dolder ®, MP-Clip ®, Ackermann®, round) In two different materials: titanium Grade 4 and cobaltchromium alloy (coron®) Characteristics Direct connection to the implant, no additional abutment needed High precision Straumann® CARES ® Variobase™ Coping To allow Straumann dental restorations on competitive implant systems. By maintaining the genuine abutment-implant connection. For dental restorations on Camlog ® and NobelReplace ® implants Available in zerion® Characteristics Customized shape and emergence profile Proven Straumann precision fit

148

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS BONE LEVEL CUSTOMIZED IMPLANT PROSTHETICS Process description 1. For appropriate scanner and software compatibility, please ask your local Straumann sales representative. 2. The model situation is scanned with the Straumann ® CARES ® Scan CS2 scanner. 3. The prosthetic part of the abutment is designed with Straumann® CARES ® Visual. 4. The data generated is sent to the Straumann milling center via the Straumann® CARES ® Visual software or the Straumann® CARES ® Webshop (for abutments only – http://cares.straumann.com). 5. The customized abutment is manufactured at the Straumann milling center. 6. Express delivery to the dental laboratory in just a few

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

working days.

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS BONE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Art. No.

Article

Dimensions

Material

025.2900

NC Basal screw

Length 7.9 mm

TAN

025.2926

NC/RC SRBB Bone Level screw

Length 7.9 mm

TAN

025.2906

NC Basal screw for ceramic abutment only

Length 8.9 mm

TAN

025.2903 025.2903-04

NC Wax-up sleeve for single use

Length 15.2 mm

PEEK

025.2905

NC Straumann ® Scanbody includes fixation screw, for Straumann ® CARES ® es1 scanner and Straumann ® CARES ® Scan CS2 scanner, for software version CARES ® Visual 6.2 and lower

Length 11.7 mm

PEEK/TAN

025.2915

CARES ® NC Mono Scanbody includes fixation screw

Ø 3.5 mm, Height 10 mm

PEEK/TAN

025.2901-04

NC Scanbody for Sirona ® System

Length 13.3 mm, Ø 4 mm

PEEK/ABS

025.2102

NC Repositionable implant analog for fully digital and conventional workflow

Length 17 mm

Stainless steel

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.2926

NC/RC SRBB Bone Level screw

Length 7.9 mm

TAN

025.4906

RC Basal screw for ceramic abutment only

Length 8.2 mm

TAN

025.4903 025.4903-04

RC Wax-up sleeve for single use

Length 18.8 mm

PEEK

NARROW CrossFit ®

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

REGULAR CrossFit ®

All final abutments are permanently screwed into the implant at 35 Ncm. For further information and the webshop, refer to http://cares.straumann.com. Straumann ® CARES ® Abutments may not be available in your country. 150

STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS BONE LEVEL CUSTOMIZED IMPLANT PROSTHETICS

Art. No.

Article

Dimensions

Material

025.4905

RC Straumann ® Scanbody includes fixation screw, for Straumann ® CARES ® es1 scanner and Straumann ® CARES ® Scan CS2 scanner, for software version CARES ® Visual 6.2 and lower

Length 13.4 mm

PEEK/TAN

025.4915

CARES ® RC Mono Scanbody includes fixation screw

Ø 4.1 mm, Height 10 mm

PEEK/TAN

025.4901-04

RC Scanbody for Sirona ® System

Length 13.3 mm

PEEK/ABS

025.4102

RC Repositionable implant analog for fully digital and conventional workflow

Length 17 mm

Stainless steel

REGULAR CrossFit ®

019.0063

Straumann ® CARES ® Wax-up kit contains wax-up sleeve holders for Straumann dental restorations on Straumann implants

019.0050

Straumann ® CARES ® Wax-up kit for Camlog ® contains wax-up sleeve holders for Straumann dental restorations on Camlog ® implants

019.0051

Straumann ® CARES ® Wax-up kit for NobelReplace™ contains wax-up sleeve holders for Straumann dental restorations on NobelReplace ® implants

PROSTHETICS STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICS

Wax-up kits

CROWNS AND BRIDGES

NARROW CrossFit® IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 025.2201

NC Impression post for closed tray, with 1 guide screw and 2 caps

Length 12.3 mm

TAN/POM

025.2202

NC Impression post for open tray, short, with guide screw

Length 16.5 mm

TAN

025.2205

NC Impression post for open tray, long, with guide screw

Length 24 mm

TAN

025.2101

NC Implant analog

Length 12 mm

025.2102

NC Repositionable implant analog for fully digital and conventional workflow

Length 17 mm

Stainless steel

025.2208-04

NC Bite registration aid

Height 8 mm

POM

025.2212-04

NC Bite registration aid

Height 12 mm

POM

024.2372

NC Temporary Abutment VITA CAD-Temp ®

Height 11 mm, Ø 5 mm

PMMA/TAN

024.2371

NC Temporary abutment for crown

Height 11 mm, Ø 3.5 mm

TAN

024.2375

NC Temporary abutment for bridge

Height 11 mm, Ø 3.5 mm

TAN

Bite registration

PROSTHETICS CROWNS AND BRIDGES

Temporary restoration

Important The temporary abutment is screwed into the implant at 15–35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

152

CROWNS AND BRIDGES

NARROW CrossFit® IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

025.2900

NC Basal screw

Length 7.9 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

Important The temporary abutment is screwed into the implant at 15–35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

153

CROWNS AND BRIDGES

NARROW CrossFit® ANATOMIC IPS e.max®, GOLD, ANATOMIC AND MESO ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

022.2410

NC Gold abutment for crown

Height 3.7 mm

Ceramicor ® / POM

022.2812

NC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 2 mm

ZrO 2 /MO 0

022.2814

NC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 3.5 mm

ZrO 2 /MO 0

022.2822

NC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 2 mm

ZrO 2 /MO 0

022.2824

NC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 3.5 mm

ZrO 2 /MO 0

022.2832

NC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 2 mm

ZrO 2 /MO 1

022.2834

NC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 3.5 mm

ZrO 2 /MO 1

022.2842

NC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 2 mm

ZrO 2 /MO 1

022.2844

NC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 3.5 mm

ZrO 2 /MO 1

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

154

CROWNS AND BRIDGES

NARROW CrossFit® ANATOMIC IPS e.max®, GOLD, ANATOMIC AND MESO ABUTMENT

Art. No.

Article

Dimensions

Material

022.2102

NC Anatomic abutment straight

Gingiva height 2 mm

022.2104

NC Anatomic abutment straight

Gingiva height 3.5 mm

022.2152

NC Anatomic abutment angled 15°

Gingiva height 2 mm

022.2154

NC Anatomic abutment angled 15°

Gingiva height 3.5 mm

022.2202

NC Meso abutment

Height 13.4 mm, Ø 6 mm

025.2900

NC Basal screw

Length 7.9 mm

TAN

025.2920 025.2920-04

NC Polishing aid

Length 16 mm

Stainless steel

046.239

Analog holder

Length 105 mm

Al/Steel

Cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

155

CROWNS AND BRIDGES NARROW CrossFit® VARIOBASE™ ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 025.2921

NC Variobase™ Abutment with screw

Ø 3.8 mm, Height 3.5 mm

TAN

023.2756 023.2756-04

NC Burn-out coping for Variobase™ Abutment

Ø 3.8 mm, Height 12 mm

POM

025.2915

CARES ® NC Mono Scanbody includes fixation screw

Ø 3.5 mm, Height 10 mm

PEEK/TAN

025.2900*

NC Basal screw

Length 7.9 mm

TAN

* = For individual ordering only in cases where the screw supplied is lost.

PROSTHETICS CROWNS AND BRIDGES Important NC Variobase™ Abutments are permanently screwed into the implant at 35 Ncm.

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

Note Variobase™ Abutment may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information. The digital workflow using the CARES ® NC Mono Scanbody requires a compatible dental software containing the Variobase™ Implant Kit. Please check with your local sales representative for more information.

156

CROWNS AND BRIDGES NARROW CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

027.4301

NC Cementable All-in-One Set for crown

Ø 3.5 mm, Abutment height 4 mm, Gingiva height 1 mm

027.4302

NC Cementable All-in-One Set for crown

Ø 3.5 mm, Abutment height 4 mm, Gingiva height 2 mm

027.4303

NC Cementable All-in-One Set for crown

Ø 3.5 mm, Abutment height 4 mm, Gingiva height 3 mm

027.4307

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 1 mm

027.4308

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 2 mm

027.4309

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 3 mm

027.4310

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 1 mm

027.4311

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 2 mm

027.4312

NC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 3 mm

Material

PROSTHETICS CROWNS AND BRIDGES

All-in-One Sets

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

157

CROWNS AND BRIDGES NARROW CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

022.2311

NC Cementable abutment

Ø 3.5 mm, Gingiva height 1 mm, Abutment height 4 mm

022.2312

NC Cementable abutment

Ø 3.5 mm, Gingiva height 2 mm, Abutment height 4 mm

022.2313

NC Cementable abutment

Ø 3.5 mm, Gingiva height 3 mm, Abutment height 4 mm

022.2315

NC Cementable abutment

Ø 3.5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

022.2316

NC Cementable abutment

Ø 3.5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

022.2317

NC Cementable abutment

Ø 3.5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

Cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

158

CROWNS AND BRIDGES

Art. No.

Article

Dimensions

Material

022.2321

NC Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 4 mm

022.2322

NC Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 4 mm

022.2323

NC Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 4 mm

022.2325

NC Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

022.2326

NC Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

022.2327

NC Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

Ti PROSTHETICS CROWNS AND BRIDGES

NARROW CrossFit® CEMENTABLE ABUTMENT

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

159

CROWNS AND BRIDGES NARROW CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

Impression taking (abutment level) and master cast fabrication, for cementable abutment

025.2203-04

NC Impression cap for cementable abutment

Ø 3.5 mm, Abutment height 4 mm

POM

025.2204-04

NC Impression cap for cementable abutment

Ø 5 mm, Abutment height 4 mm

POM

025.2220-04

NC Impression cap for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

POM

025.2112

NC Implant analog for cementable abutment

Ø 3.5 mm, Abutment height 4 mm

TAN

025.2116

NC Implant analog for cementable abutment

Ø 3.5 mm, Abutment height 5.5 mm

TAN

025.2122

NC Implant analog for cementable abutment

Ø 5 mm, Abutment height 4 mm

TAN

025.2126

NC Implant analog for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

TAN

PROSTHETICS CROWNS AND BRIDGES Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

160

CROWNS AND BRIDGES NARROW CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

Temporary restoration, for cementable abutment NC Temporary coping for cementable abutment

Ø 3.5 mm

PMMA

024.2356

NC Temporary coping for cementable abutment

Ø 5 mm

PMMA

024.2312-04

NC Protective cap for cementable abutment

Ø 3.5 mm, Abutment height 4 mm

PEEK

024.2316-04

NC Protective cap for cementable abutment

Ø 3.5 mm, Abutment height 5.5 mm

PEEK

024.2322-04

NC Protective cap for cementable abutment

Ø 5 mm, Abutment height 4 mm

PEEK

024.2326-04

NC Protective cap for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

PEEK

PROSTHETICS CROWNS AND BRIDGES

024.2346

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

161

CROWNS AND BRIDGES NARROW CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

023.2310

NC Coping for bridge on cementable abutment

Ø 3.5 mm

POM

023.2316

NC Coping for crown on cementable abutment

Ø 3.5 mm

POM

023.2320

NC Coping for bridge on cementable abutment

Ø 5 mm

POM

023.2326

NC Coping for crown on cementable abutment

Ø 5 mm

POM

025.2911-04

NC Transfer aid for cementable abutment

Ø 3.5 mm

025.2912-04

NC Transfer aid for cementable abutment

Ø 5 mm

025.2908

NC Basal screw for cementable abutment only

Length 7.9 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

Coping, for cementable abutment

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

162

BRIDGES

NARROW CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

022.2731

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 1 mm

TAN

022.2732

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

TAN

022.2734

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 4 mm

TAN

022.2741

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.2742

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.2744

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.2782

NC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.2786

NC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

PROSTHETICS BRIDGES

Screw-retained restorations

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

163

BRIDGES

NARROW CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

022.2745*

NC Screw-retained abutment straight

Ø 3.5 mm, Gingiva height 1 mm

TAN

022.2746*

NC Screw-retained abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

TAN

022.2753*

NC Screw-retained abutment straight

Ø 3.5 mm, Gingiva height 4.0 mm

TAN

022.2747*

NC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 1 mm

TAN

022.2748*

NC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.2754*

NC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.2749*

NC Screw-retained abutment angled 17°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.2750*

NC Screw-retained abutment angled 17°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.2755*

NC Screw-retained abutment angled 17°, type A

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.2756*

NC Screw-retained abutment angled 17°, type B

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.2751*

NC Screw-retained abutment angled 30°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.2752*

NC Screw-retained abutment angled 30°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.2757*

NC Screw-retained abutment angled 30°, type A

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.2758*

NC Screw-retained abutment angled 30°, type B

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

Screw-retained abutment

PROSTHETICS BRIDGES

* = These products may not be available in all countries.

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

164

BRIDGES

NARROW CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

025.2231-04

NC Impression cap for Multi-base abutment, straight

Ø 3.5 mm

POM

025.2241-04

NC Impression cap for Multi-base abutment, straight

Ø 4.5 mm

POM

025.2232

NC Impression post for Multi-base abutment, straight

Ø 3.5 mm

TAN

025.2242

NC Impression post for Multi-base abutment, straight

Ø 4.5 mm

TAN

025.2206

NC Impression post for Multi-base abutment, angled 25°

Ø 4 mm

TAN

025.2131

NC Implant analog for Multi-base abutment, straight

Ø 3.5 mm

TAN

025.2141

NC Implant analog for Multi-base abutment, straight

Ø 4.5 mm

TAN

025.2106

NC Implant analog for Multi-base abutment, angled 25°

Ø 4 mm

TAN

PROSTHETICS BRIDGES

Impression taking (abutment level) and master cast fabrication, for Multi-base abutment

Impression taking (abutment level) and master cast fabrication, for screw-retained abutment

025.2243*

Impression post for open tray for screw-retained abutment, straight, abutment level

Ø 3.5 mm

TAN

025.2245*

Closed tray impression post for screw-retained abutment, straight, abutment-level

Ø 3.5 mm

TAN/POM

023.2754*

NC Analog for screw-retained abutment, straight

Ø 3.5 mm

TAN

023.4756*

NC/RC Analog for screw-retained abutment, straight

Ø 4.6 mm

TAN

023.4757*

NC/RC Analog for screw-retained abutment, angled 17°/30°

Ø 4.6 mm

TAN

* = These products may not be available in all countries.

165

BRIDGES

NARROW CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

Temporary restoration, for Multi-base abutment 024.2332

NC Temporary coping for Multi-base abutment, straight

Ø 3.5 mm

024.2342

NC Temporary coping for Multi-base abutment, straight

Ø 4.5 mm

024.2307

NC Temporary coping for Multi-base abutment, angled 25°

Ø 4 mm

024.2331-04

NC Protective cap for Multi-base abutment, straight

Ø 3.5 mm

PEEK/TAN

024.2341-04

NC Protective cap for Multi-base abutment, straight

Ø 4.5 mm

PEEK/TAN

024.2306-04

NC Protective cap for Multi-base abutment, angled 25°

Ø 4 mm

PEEK/TAN

Temporary restoration, for screw-retained abutment

PROSTHETICS BRIDGES

024.2323-04

NC Protective cap for screw-retained abutment*

Ø 3.5 mm, Height 5 mm

PEEK

024.2324-04

NC Protective cap for screw-retained abutment*

Ø 3.5 mm, Height 6.5 mm

PEEK

024.2325-04

NC Protective cap for screw-retained abutment*

Ø 3.5 mm, Height 8 mm

PEEK

025.0000

CARES ® Mono Scanbody for screw-retained abutment, abutment level*

Ø 3.5 mm

PEEK

* = These products may not be available in all countries.

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

166

BRIDGES

NARROW CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

023.2731

NC Coping for bridge on Multi-base abutment, straight

Ø 3.5 mm

Ceramicor ® / POM

023.2741

NC Coping for bridge on Multi-base abutment, straight

Ø 4.5 mm

Ceramicor ® / POM

023.2701

NC Coping for bridge on Multi-base abutment, angled 25°

Ø 4 mm

Ceramicor ® / POM

023.2734

NC Coping for bridge on Multi-base abutment, straight

Ø 3.5 mm

POM

023.2744

NC Coping for bridge on Multi-base abutment, straight

Ø 4.5 mm

POM

023.2704

NC Coping for bridge on Multi-base abutment, angled 25°

Ø 4 mm

POM

023.2747*

NC Coping for screw-retained abutment, crown

Ø 3.5 mm, Height 11 mm

023.2749*

NC Coping for screw-retained abutment, bridge

Ø 3.5 mm, Height 11 mm

023.2750*

NC Coping for screw-retained abutment, bar

Ø 3.5 mm, Height 5.5 mm

023.2748*

NC Burn-out coping for screw-retained abutment, crown

Ø 3.5 mm, Height 11 mm

POM

023.4748*

NC/RC Burn-out coping for screw-retained abutment, crown

Ø 4.6 mm, Height 11 mm

POM

023.2755*

NC Burn-out coping for screw-retained abutment, bridge/bar

Ø 3.5 mm, Height 11 mm

POM

023.4758*

NC Burn-out coping for screw-retained abutment, bridge/bar

Ø 4.6 mm, Height 11 mm

POM

Coping, for Multi-base abutment

PROSTHETICS BRIDGES

Coping, for screw-retained abutment

* = These products may not be available in all countries.

167

CROWNS AND BRIDGES NARROW CrossFit® AUXILIARY PARTS

Art. No.

Article

Dimensions

Material

025.2920 025.2920-04

NC Polishing aid

Length 16 mm

Stainless steel

025.2900*

NC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

023.4749**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 1.0 mm

TAN

023.4750**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 2.5 mm

TAN

023.4760**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 4.0 mm

TAN

023.4763**

NC/RC Occlusal screw for coping, screw-retained abutment

Length 3.3 mm

TAN

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

* = For individual ordering only in cases where the screw supplied is lost. ** = These products may not be available in all countries.

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

168

CROWNS AND BRIDGES

REGULAR CrossFit® IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT

Art. No.

Article

Dimensions

Material

Impression taking and master cast fabrication 025.4201

RC Impression post for closed tray, with 1 guide screw and 2 caps

Length 12.3 mm

TAN/POM

025.4202

RC Impression post for open tray, short, with guide screw

Length 16.5 mm

TAN

025.4205

RC Impression post for open tray, long, with guide screw

Length 24 mm

TAN

025.4101

RC Implant analog

Length 12 mm

025.4102

RC Repositionable implant analog for fully digital and conventional workflow

Length 17 mm

Stainless steel

025.4208-04

RC Bite registration aid

Height 8 mm

POM

025.4212-04

RC Bite registration aid

Height 12 mm

POM

024.4372

RC Temporary Abutment VITA CAD-Temp ®

Height 12 mm, Ø 7 mm

PMMA/ TAN

024.4371

RC Temporary abutment for crown

Height 11 mm, Ø 4.5 mm

TAN

024.4375

RC Temporary abutment for bridge

Height 11 mm, Ø 4.5 mm

TAN

025.4900

RC Basal screw

Length 7.9 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS CROWNS AND BRIDGES

Bite registration

Temporary restoration

Auxiliary parts

Important The temporary abutment is screwed into the implant at 15–35 Ncm. Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 169

CROWNS AND BRIDGES REGULAR CrossFit® GOLD, ANATOMIC IPS e.max® ABUTMENT

Art. No.

Article

Dimensions

Material

RC Gold abutment for bridge

Height 5.2 mm

Ceramicor ® / POM

Screw-retained restorations 022.4430

Screw-retained or cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

022.4410

RC Gold abutment for crown

Height 3.8 mm

Ceramicor ® / POM

022.4812

RC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 2 mm

ZrO 2 /MO 0

022.4814

RC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 3.5 mm

ZrO 2 /MO 0

022.4822

RC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 2 mm

ZrO 2 /MO 0

022.4824

RC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 3.5 mm

ZrO 2 /MO 0

022.4832

RC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 2 mm

ZrO 2 /MO 1

022.4834

RC Straumann ® Anatomic IPS e.max ® abutment straight

Gingiva height 3.5 mm

ZrO 2 /MO 1

022.4842

RC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 2 mm

ZrO 2 /MO 1

022.4844

RC Straumann ® Anatomic IPS e.max ® abutment angled 15°

Gingiva height 3.5 mm

ZrO 2 /MO 1

All final abutments are permanently screwed into the implant at 35 Ncm. Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 170

CROWNS AND BRIDGES REGULAR CrossFit® ANATOMIC, MESO ABUTMENT

Art. No.

Article

Dimensions

Material

022.4102

RC Anatomic abutment straight

Gingiva height 2 mm

022.4104

RC Anatomic abutment straight

Gingiva height 3.5 mm

022.4152

RC Anatomic abutment angled 15°

Gingiva height 2 mm

022.4154

RC Anatomic abutment angled 15°

Gingiva height 3.5 mm

022.4202

RC Meso abutment

Height 13.4 mm, Ø 8 mm

025.4920 025.4920-04

RC Polishing aid

Length 16 mm

Stainless steel

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.4902

RC Basal screw for gold abutment, for bridge only

Length 8.3 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

Cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

Auxiliary parts

CROWNS AND BRIDGES REGULAR CrossFit® VARIOBASE™ ABUTMENT

Art. No.

Article

Dimensions

Material

Screw-retained or cement-retained restorations 025.4921

RC Variobase™ Abutment with screw

Ø 4.5 mm, Height 3.5 mm

TAN

023.4759 023.4759-04

RC Burn-out coping for Variobase™ Abutment

Ø 4.5 mm, Height 12 mm

POM

025.4915

CARES ® RC Mono Scanbody includes fixation screw

Ø 4.1 mm, Height 10 mm

PEEK/TAN

025.4900*

RC Basal screw

Length 7.9 mm

TAN

* = For individual ordering only in cases where the screw supplied is lost.

PROSTHETICS CROWNS AND BRIDGES Important RC Variobase™ Abutments are permanently screwed into the implant at 35 Ncm.

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . Note Variobase™ Abutment may not be available in all countries; subject to regulatory approval and market release. Please check with your local sales representative for more information. The digital workflow using the CARES ® RC Mono Scanbody requires a compatible dental software containing the Variobase™ Implant Kit. Please check with your local sales representative for more information.

172

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

027.4313

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 1 mm

027.4314

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 2 mm

027.4315

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 4 mm, Gingiva height 3 mm

027.4316

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 1 mm

027.4317

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 2 mm

027.4318

RC Cementable All-in-One Set for crown

Ø 5 mm, Abutment height 5.5 mm, Gingiva height 3 mm

027.4319

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 4 mm, Gingiva height 1 mm

027.4320

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 4 mm, Gingiva height 2 mm

027.4321

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 4 mm, Gingiva height 3 mm

Material

PROSTHETICS CROWNS AND BRIDGES

All-in-One Sets

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

027.4322

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 5.5 mm, Gingiva height 1 mm

027.4323

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 5.5 mm, Gingiva height 2 mm

027.4324

RC Cementable All-in-One Set for crown

Ø 6.5 mm, Abutment height 5.5 mm, Gingiva height 3 mm

022.4321

RC Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 4 mm

022.4322

RC Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 4 mm

022.4323

RC Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 4 mm

022.4325

RC Cementable abutment

Ø 5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

022.4326

RC Cementable abutment

Ø 5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

022.4327

RC Cementable abutment

Ø 5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

All-in-One Sets

Cement-retained restorations

PROSTHETICS CROWNS AND BRIDGES

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

022.4331

RC Cementable abutment

Ø 6.5 mm, Gingiva height 1 mm, Abutment height 4 mm

022.4332

RC Cementable abutment

Ø 6.5 mm, Gingiva height 2 mm, Abutment height 4 mm

022.4333

RC Cementable abutment

Ø 6.5 mm, Gingiva height 3 mm, Abutment height 4 mm

022.4335

RC Cementable abutment

Ø 6.5 mm, Gingiva height 1 mm, Abutment height 5.5 mm

022.4336

RC Cementable abutment

Ø 6.5 mm, Gingiva height 2 mm, Abutment height 5.5 mm

022.4337

RC Cementable abutment

Ø 6.5 mm, Gingiva height 3 mm, Abutment height 5.5 mm

PROSTHETICS CROWNS AND BRIDGES

Cement-retained restorations

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

175

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

Impression taking (abutment level) and master cast fabrication, for cementable abutment

PROSTHETICS CROWNS AND BRIDGES

025.4203-04

RC Impression cap for cementable abutment

Ø 5 mm, Abutment height 4 mm

POM

025.4220-04

RC Impression cap for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

POM

025.4204-04

RC Impression cap for cementable abutment

Ø 6.5 mm, Abutment height 4 mm

POM

025.4230-04

RC Impression cap for cementable abutment

Ø 6.5 mm, Abutment height 5.5 mm

POM

025.4132

RC Implant analog for cementable abutment

Ø 5 mm, Abutment height 4 mm

TAN

025.4136

RC Implant analog for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

TAN

025.4122

RC Implant analog for cementable abutment

Ø 6.5 mm, Abutment height 4 mm

TAN

025.4126

RC Implant analog for cementable abutment

Ø 6.5 mm, Abutment height 5.5 mm

TAN

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 176

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

Temporary restoration, for cementable abutment RC Temporary coping for cementable abutment

Ø 5 mm

PMMA

024.4366

RC Temporary coping for cementable abutment

Ø 6.5 mm

PMMA

024.4322-04

RC Protective cap for cementable abutment

Ø 5 mm, Abutment height 4 mm

PEEK

024.4326-04

RC Protective cap for cementable abutment

Ø 5 mm, Abutment height 5.5 mm

PEEK

024.4332-04

RC Protective cap for cementable abutment

Ø 6.5 mm, Abutment height 4 mm

PEEK

024.4336-04

RC Protective cap for cementable abutment

Ø 6.5 mm, Abutment height 5.5 mm

PEEK

PROSTHETICS CROWNS AND BRIDGES

024.4356

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 177

CROWNS AND BRIDGES REGULAR CrossFit® CEMENTABLE ABUTMENT

Art. No.

Article

Dimensions

Material

023.4320

RC Coping for bridge on cementable abutment

Ø 5 mm

POM

023.4326

RC Coping for crown on cementable abutment

Ø 5 mm

POM

023.4330

RC Coping for bridge on cementable abutment

Ø 6.5 mm

POM

023.4336

RC Coping for crown on cementable abutment

Ø 6.5 mm

POM

025.4912-04

RC Transfer aid for cementable abutment

Ø 5 mm

025.4913-04

RC Transfer aid for cementable abutment

Ø 6.5 mm

025.4908

RC Basal screw for cementable abutment only

Length 7.9 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

Coping, for cementable abutment

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 178

BRIDGES

REGULAR CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

022.4741

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.4742

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.4744

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.4761

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 1 mm

TAN

022.4762

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 2.5 mm

TAN

022.4764

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 4 mm

TAN

022.4782

RC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.4786

RC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

PROSTHETICS BRIDGES

Multi-base Abutment

BRIDGES

REGULAR CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

022.4745*

RC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 1 mm

TAN

022.4746*

RC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.4751*

RC Screw-retained abutment straight

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.4747*

RC Screw-retained abutment angled 17°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.4748*

RC Screw-retained abutment angled 17°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.4752*

RC Screw-retained abutment angled 17°, type A

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.4753*

RC Screw-retained abutment angled 17°, type B

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.4749*

RC Screw-retained abutment angled 30°, type A

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.4750*

RC Screw-retained abutment angled 30°, type B

Ø 4.6 mm, Gingiva height 2.5 mm

TAN

022.4754*

RC Screw-retained abutment angled 30°, type A

Ø 4.6 mm, Gingiva height 4.0 mm

TAN

022.4755*

RC Screw-retained abutment angled 30°, type B

Width 4.6 mm, Gingiva height 4.0 mm

TAN

Screw-retained abutment

PROSTHETICS BRIDGES

* = These products may not be available in all countries.

BRIDGES

REGULAR CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

025.4241-04

RC Impression cap for Multi-base abutment, straight

Ø 4.5 mm

POM

025.4261-04

RC Impression cap for Multi-base abutment, straight

Ø 6.5 mm

POM

025.4242

RC Impression post for Multi-base abutment, straight

Ø 4.5 mm

TAN

025.4262

RC Impression post for Multi-base abutment, straight

Ø 6.5 mm

TAN

025.4206

RC Impression post for Multi-base abutment, angled 25°

Ø 4 mm

TAN

025.4141

RC Implant analog for Multi-base abutment, straight

Ø 4.5 mm

TAN

025.4161

RC Implant analog for Multi-base abutment, straight

Ø 6.5 mm

TAN

025.4106

RC Implant analog for Multi-base abutment, angled 25°

Ø 4 mm

TAN

PROSTHETICS BRIDGES

Impression taking (abutment level) and master cast fabrication, for Multi-base abutment

Impression taking (abutment level) and master cast fabrication, for screw-retained abutment

025.2244*

Impression post for open tray for screw-retained abutment, straight, abutment level

Ø 4.6 mm

TAN

025.2246*

Closed tray impression post for screw-retained abutment, straight, abutment-level

Ø 4.6 mm

TAN/POM

023.4756*

NC/RC Analog for screw-retained abutment, straight

Ø 4.6 mm

TAN

023.4757*

NC/RC Analog for screw-retained abutment, angled 17°/30°

Ø 4.6 mm

TAN

* = These products may not be available in all countries.

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 181

BRIDGES

REGULAR CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

Temporary restoration, for Multi-base abutment 024.4342

RC Temporary coping for Multi-base abutment, straight

Ø 4.5 mm

024.4362

RC Temporary coping for Multi-base abutment, straight

Ø 6.5 mm

024.4307

RC Temporary coping for Multi-base abutment, angled 25°

Ø 4 mm

024.4341-04

RC Protective cap for Multi-base abutment, straight

Ø 4.5 mm

PEEK/TAN

024.4361-04

RC Protective cap for Multi-base abutment, straight

Ø 6.5 mm

PEEK/TAN

024.4306-04

RC Protective cap for Multi-base abutment, angled 25°

Ø 4 mm

PEEK/TAN

Temporary restoration, for screw-retained abutment

PROSTHETICS BRIDGES

024.4323-04

NC/RC Protective cap for screw-retained abutment*

Ø 4.6 mm, Height 5.1 mm

PEEK

024.4324-04

NC/RC Protective cap for screw-retained abutment*

Ø 4.6 mm, Height 6.6 mm

PEEK

024.4325-04

NC/RC Protective cap for screw-retained abutment*

Ø 4.6 mm, Height 8.1 mm

PEEK

025.0001

CARES ® Mono Scanbody for screw-retained abutment, abutment level*

Ø 4.6 mm

PEEK

* = These products may not be available in all countries.

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 182

BRIDGES

REGULAR CrossFit® SCREW-RETAINED RESTORATIONS

Art. No.

Article

Dimensions

Material

023.4741

RC Coping for bridge on Multi-base abutment, straight

Ø 4.5 mm

Ceramicor ® / POM

023.4761

RC Coping for bridge on Multi-base abutment, straight

Ø 6.5 mm

Ceramicor ® / POM

023.4701

RC Coping for bridge on Multi-base abutment, angled 25°

Ø 4 mm

Ceramicor ® / POM

023.4744

RC Coping for bridge on Multi-base abutment, straight

Ø 4.5 mm

POM

023.4764

RC Coping for bridge on Multi-base abutment, straight

Ø 6.5 mm

POM

023.4704

RC Coping for bridge on Multi-base abutment, angled 25°

Ø 4 mm

POM

023.4748*

NC/RC Burn-out coping for screw-retained abutment, crown

Ø 4.6 mm, Height 11 mm

POM

023.4758*

NC Burn-out coping for screw-retained abutment, bridge/bar

Ø 4.6 mm, Height 11 mm

POM

Coping, for Multi-base abutment

PROSTHETICS BRIDGES

Coping, for screw-retained abutment

* = These products may not be available in all countries.

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 183

CROWNS AND BRIDGES REGULAR CrossFit® AUXILIARY PARTS

Art. No.

Article

Dimensions

Material

025.4920 025.4920-04

RC Polishing aid

Length 16 mm

Stainless steel

025.4900*

RC Basal screw

Length 7.9 mm

TAN

025.4902

RC Basal screw for gold abutment, for bridge only

Length 8.3 mm

TAN

025.4908

RC Basal screw for cementable abutment only

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

046.239

Analog holder

Length 105 mm

Al/Steel

023.4749**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 1.0 mm

TAN

023.4750**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 2.5 mm

TAN

023.4760**

NC/RC Screw for screw-retained abutment, straight

Gingiva height 4.0 mm

TAN

023.4763**

NC/RC Occlusal screw for coping, screw-retained abutment

Length 3.3 mm

TAN

023.4747**

NC/RC Coping for screw-retained abutment, crown

Ø 4.6 mm, Height 11 mm

023.4751**

NC/RC Coping for screw-retained abutment, bridge

Ø 4.6 mm, Height 11 mm

023.4752**

NC/RC Coping for screw-retained abutment, bar

Ø 4.6 mm, Height 5.5 mm

Auxiliary parts

PROSTHETICS CROWNS AND BRIDGES

* = For individual ordering only in cases where the screw supplied is lost. ** = These products may not be available in all countries.

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 184

HYBRID DENTURES NARROW CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

022.2502

NC LOCATOR ® Abutment

Height 2 mm

TAV

022.2503

NC LOCATOR ® Abutment

Height 3 mm

TAV

022.2504

NC LOCATOR ® Abutment

Height 4 mm

TAV

022.2505

NC LOCATOR ® Abutment

Height 5 mm

TAV

022.2506

NC LOCATOR ® Abutment

Height 6 mm

TAV

PROSTHETICS HYBRID DENTURES

LOCATOR ® Abutment

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

185

HYBRID DENTURES NARROW CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

LOCATOR ® components 048.189V2

LOCATOR ® Male processing package contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male (height 1.9 mm), block-out spacer (048.196), clear replacement male (048.190), pink replacement male (048.191), blue replacement male (048.192)

Ti/Nylon

048.190V4

LOCATOR ® Replacement male clear, 0°–10°•, 5 lbs, 2.27 kg••

Height 1.7 mm

Nylon

048.191V4

LOCATOR ® Replacement male pink, light retention, 0°–10°•, 3 lbs, 1.36 kg••

Height 1.7 mm

Nylon

048.192V4

LOCATOR ® Replacement male blue, extra-light retention, 0°–10°•, 1.5 lbs, 0.68 kg••

Height 1.7 mm

Nylon

• = For the correction of angle divergences •• = Retention force

PROSTHETICS HYBRID DENTURES 0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

186

HYBRID DENTURES NARROW CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

LOCATOR ® components LOCATOR ® Male processing package extended range, contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male (height 1.9 mm), block-out spacer (048.196), green replacement male (048.193), orange replacement male (048.188), red replacement male (048.194)

Ti/Nylon

048.193V4

LOCATOR ® Replacement male green, extended range, 10°–20°•, 4 lbs, 1.82 kg••

Height 1.7 mm

Nylon

048.188V4

LOCATOR ® Replacement male orange, light retention, extended range, 10°–20°•, 2 lbs, 0.91 kg••

Height 1.7 mm

Nylon

048.194V4

LOCATOR ® Replacement male red, extra-light retention, extended range, 10°–20°•, 1 lbs, 0.45 kg••

Height 1.7 mm

Nylon

048.181V4

LOCATOR ® Replacement male gray, extended range, zero (0) retention

Height 1.7 mm

Nylon

PROSTHETICS HYBRID DENTURES

048.182V2

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

187

HYBRID DENTURES NARROW CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

025.0120-04

LOCATOR ® Female analog

Length 10 mm, Ø 4 mm

048.197V4

LOCATOR ® Impression coping

Height 4 mm

Al housing with LDPE insert

048.196V20

LOCATOR ® Block-out spacer

Thickness 0.4 mm

Silicone rubber

048.195V4

LOCATOR ® Black processing male

Height 1.9 mm

LDPE

048.218V4

LOCATOR ® Processing spacer

POM

046.413V4

LOCATOR ® Abutment holder sleeve

PSU

LOCATOR ® components

Auxiliary parts

PROSTHETICS HYBRID DENTURES

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

048.199V4

LOCATOR ® Parallel post

Length 8 mm

LDPE

048.200

LOCATOR ® Angle measurement guide

Length 50 mm, Width 15 mm

Stainless steel

0473

188

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

HYBRID DENTURES NARROW CrossFit® BAR

Art. No.

Article

Dimensions

Material

022.2701

NC Abutment for bars, gold

Height 10 mm

Ceramicor ®

022.2731

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 1 mm

TAN

022.2732

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

TAN

022.2734

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 4 mm

TAN

022.2741

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.2742

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.2744

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.2782

NC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.2786

NC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

023.2732

NC Coping for bar on Multi-base abutment, straight

Ø 3.5 mm

Ceramicor ®

023.2742

NC Coping for bar on Multi-base abutment, straight

Ø 4.5 mm

Ceramicor ®

023.2702

NC Coping for bar on Multi-base abutment, angled 25°

Ø 4 mm

Ceramicor ®

PROSTHETICS HYBRID DENTURES

Components for gold bars

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

189

HYBRID DENTURES NARROW CrossFit® BAR

Art. No.

Article

Dimensions

Material

048.411

Dolder ® bar egg-shaped cross-section, mini

Length 25 mm, Height 2.3 mm

Elitor ®

048.412

Dolder ® bar egg-shaped cross-section, regular

Length 25 mm, Height 3 mm

Elitor ®

048.413

Dolder ® bar matrix includes spacer, mini

Length 25 mm, Height 2.75 mm

Elitor ® /Brass

048.414

Dolder ® bar matrix includes spacer, regular

Length 25 mm, Height 3.5 mm

Elitor ® /Brass

046.150

Activator set for all bar matrices, threepart

Length 50 mm

Stainless steel

046.151

Deactivator for Dolder ® bar matrices, mini

Length 66 mm

Grilon BS/ Brass

046.152

Deactivator for Dolder ® bar matrices, regular

Length 66 mm

Grilon BS/ Brass

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

025.0911-04

NC/RC Stabilization pin for bar on Multi-base abutment

Length 16 mm

Stainless steel

Components for gold bars

Auxiliary parts

PROSTHETICS HYBRID DENTURES

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

190

HYBRID DENTURES NARROW CrossFit® BAR

Art. No.

Article

Dimensions

Material

022.2702

NC Abutment for bars

Height 10 mm

022.2731

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 1 mm

TAN

022.2732

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 2.5 mm

TAN

022.2734

NC Multi-base abutment straight

Ø 3.5 mm, Gingiva height 4 mm

TAN

022.2741

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.2742

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.2744

NC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.2782

NC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.2786

NC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

023.2736

NC Coping for bar on Multi-base abutment, straight

Ø 3.5 mm

023.2746

NC Coping for bar on Multi-base abutment, straight

Ø 4.5 mm

023.2706

NC Coping for bar on Multi-base abutment, angled 25°

Ø 4 mm

PROSTHETICS HYBRID DENTURES

Components for titanium bars

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

191

HYBRID DENTURES NARROW CrossFit® BAR

Art. No.

Article

Dimensions

Material

048.466

Titanium bar egg-shaped cross-section, mini

Length 50 mm, Height 2.3 mm

048.465

Titanium bar egg-shaped cross-section, regular

Length 50 mm, Height 3 mm

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

048.461

Plastic bar egg-shaped cross-section, mini

Length 80 mm, Height 2.3 mm

PMMA

048.460

Plastic bar egg-shaped cross-section, regular

Length 80 mm, Height 3 mm

PMMA

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

025.2900

NC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

Components for titanium bars

Auxiliary parts

PROSTHETICS HYBRID DENTURES

All final abutments are permanently screwed into the implant at 35 Ncm. Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

192

HYBRID DENTURES NARROW CrossFit® AUXILIARY PARTS

Art. No.

Article

Dimensions

Material

025.2920 025.2920-04

NC Polishing aid

Length 16 mm

Stainless steel

025.2900

NC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

025.0911-04

NC/RC Stabilization pin for bar on Multi-base abutment

Length 16 mm

Stainless steel

046.239

Analog holder

Length 105 mm

Al/Steel

PROSTHETICS HYBRID DENTURES

Auxiliary parts

Important NC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 3.3 mm, Narrow CrossFit ® .

193

HYBRID DENTURES REGULAR CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

022.4501

RC LOCATOR ® Abutment

Height 1 mm

TAV

022.4502

RC LOCATOR ® Abutment

Height 2 mm

TAV

022.4503

RC LOCATOR ® Abutment

Height 3 mm

TAV

022.4504

RC LOCATOR ® Abutment

Height 4 mm

TAV

022.4505

RC LOCATOR ® Abutment

Height 5 mm

TAV

022.4506

RC LOCATOR ® Abutment

Height 6 mm

TAV

LOCATOR ® Abutment

PROSTHETICS HYBRID DENTURES 0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

HYBRID DENTURES REGULAR CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

LOCATOR ® components 048.189V2

Ti/Nylon

048.190V4

LOCATOR ® Replacement male clear, 0°–10°•, 5 lbs, 2.27 kg••

Height 1.7 mm

Nylon

048.191V4

LOCATOR ® Replacement male pink, light retention, 0°–10°•, 3 lbs, 1.36 kg••

Height 1.7 mm

Nylon

048.192V4

LOCATOR ® Replacement male blue, extra-light retention, 0°–10°•, 1.5 lbs, 0.68 kg••

Height 1.7 mm

Nylon

PROSTHETICS HYBRID DENTURES

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 195

HYBRID DENTURES REGULAR CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

LOCATOR ® components

PROSTHETICS HYBRID DENTURES

048.182V2

Ti/Nylon

048.193V4

LOCATOR ® Replacement male green, extended range, 10°–20°•, 4 lbs, 1.82 kg••

Height 1.7 mm

Nylon

048.188V4

LOCATOR ® Replacement male orange, light retention, extended range, 10°–20°•, 2 lbs, 0.91 kg••

Height 1.7 mm

Nylon

048.194V4

LOCATOR ® Replacement male red, extra-light retention, extended range, 10°–20°•, 1 lbs, 0.45 kg••

Height 1.7 mm

Nylon

048.181V4

LOCATOR ® Replacement male gray, extended range, zero (0) retention

Height 1.7 mm

Nylon

• = For the correction of angle divergences •• = Retention force

0473

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 196

HYBRID DENTURES REGULAR CrossFit® LOCATOR® ABUTMENT

Art. No.

Article

Dimensions

Material

025.0120-04

LOCATOR ® Female analog

Length 10 mm, Ø 4 mm

048.197V4

LOCATOR ® Impression coping

Height 4 mm

Al housing with LDPE insert

048.196V20

LOCATOR ® Block-out spacer

Thickness 0.4 mm

Silicone rubber

048.195V4

LOCATOR ® Black processing male

Height 1.9 mm

LDPE

048.218V4

LOCATOR ® Processing spacer

POM

046.413V4

LOCATOR ® Abutment holder sleeve

PSU

LOCATOR ® components

046.415

LOCATOR ® Core tool

Length 100 mm

Stainless steel

046.416

LOCATOR ® Screwdriver for ratchet, short

Length 15 mm

Stainless steel

046.417

LOCATOR ® Screwdriver for ratchet, long

Length 21 mm

Stainless steel

048.199V4

LOCATOR ® Parallel post

Length 8 mm

LDPE

048.200

LOCATOR ® Angle measurement guide

Length 50 mm, Width 15 mm

Stainless steel

0473

PROSTHETICS HYBRID DENTURES

Auxiliary parts

Manufacturer Zest Anchors, Inc. Escondido, CA 92029 USA

197

HYBRID DENTURES REGULAR CrossFit® SFI-ANCHOR® ABUTMENT

Art. No.

Article

Dimensions

Material

045.025

CD20 SFI-Anchor ® Abutment, Div. 20°

Height 2 mm, Ø 5.3 mm

Titanium grade 5

045.036

RC SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 1 mm

Titanium grade 5/ POM

045.037

RC SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 2 mm

Titanium grade 5/ POM

045.038

RC SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 3 mm

Titanium grade 5/ POM

045.039

RC SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 4 mm

Titanium grade 5/ POM

045.040

RC SFI-Anchor ® Abutment, Div. 60° incl. aligner

Height 5 mm

Titanium grade 5/ POM

045.041

RC SFI-Anchor ® Abutment, Div. 20°

Height 1 mm

Titanium grade 5

045.042

RC SFI-Anchor ® Abutment, Div. 20°

Height 2 mm

Titanium grade 5

045.043

RC SFI-Anchor ® Abutment, Div. 20°

Height 3 mm

Titanium grade 5

045.044

RC SFI-Anchor ® Abutment, Div. 20°

Height 4 mm

Titanium grade 5

045.045

RC SFI-Anchor ® Abutment, Div. 20°

Height 5 mm

Titanium grade 5

045.046V2

SFI-Anchor ® Basic set 2x Retention insert extralow, low, medium, 2x Housing, 2x Block-out spacer

Ti/Pekkton ® / POM

045.047V4

SFI-Anchor ® Retention insert, extra-low

Pekkton ®

045.048V4

SFI-Anchor ® Retention insert, low

Pekkton ®

045.049V4

SFI-Anchor ® Retention insert, medium

Pekkton ®

Auxiliary parts

PROSTHETICS HYBRID DENTURES

198

HYBRID DENTURES

REGULAR CrossFit® LOCATOR® AND SFI-ANCHOR® ABUTMENT

Article

Dimensions

Material

045.050V4

SFI-Anchor ® Retention insert, strong

Pekkton ®

045.051

SFI-Anchor ® Retention insert, Elitor ®

Elitor ®

045.052V4

SFI-Anchor ® Spacer for use in the dental lab

POM

045.053V4

SFI-Anchor ® Block-out spacer for use in the dental office

Silicone

045.054V4

SFI-Anchor ® Impression part

POM

045.055V4

SFI-Anchor ® Analog

Titanium grade 5

045.056

RN SFI-Anchor ® Abutment planner

POM

045.062

RC SFI-Anchor ® Abutment planner

POM

045.057

SFI-Anchor ® Aligner

POM

045.058

SFI-Anchor ® Tool

Titanium grade 5

045.059

SFI-Anchor ® Screwdriver

Sandvik

045.060

SFI-Anchor ® Instrument set 4x Impression part, 4x Analog, 2x Abutment planner, 1x Tool, 1x Screwdriver

045.061V4

SFI-Anchor ® Housing

PROSTHETICS HYBRID DENTURES

Art. No.

Titanium grade 5

HYBRID DENTURES REGULAR CrossFit® BAR

Art. No.

Article

Dimensions

Material

022.4701

RC Abutment for bars, gold

Height 10 mm

Ceramicor ®

022.4741

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.4742

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.4744

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.4761

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 1 mm

TAN

022.4762

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 2.5 mm

TAN

022.4764

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 4 mm

TAN

022.4782

RC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.4786

RC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

023.4742

RC Coping for bar on Multi-base abutment, straight

Ø 4.5 mm

Ceramicor ®

023.4762

RC Coping for bar on Multi-base abutment, straight

Ø 6.5 mm

Ceramicor ®

023.4702

RC Coping for bar on Multi-base abutment, angled 25°

Ø 4 mm

Ceramicor ®

Components for gold bars

PROSTHETICS HYBRID DENTURES

HYBRID DENTURES REGULAR CrossFit® BAR

Art. No.

Article

Dimensions

Material

048.411

Dolder ® bar egg-shaped cross-section, mini

Length 25 mm, Height 2.3 mm

Elitor ®

048.412

Dolder ® bar egg-shaped cross-section, regular

Length 25 mm, Height 3 mm

Elitor ®

048.413

Dolder ® bar matrix includes spacer, mini

Length 25 mm, Height 2.75 mm

Elitor ® /Brass

048.414

Dolder ® bar matrix includes spacer, regular

Length 25 mm, Height 3.5 mm

Elitor ® /Brass

046.150

Activator set for all bar matrices, threepart

Length 50 mm

Stainless steel

046.151

Deactivator for Dolder ® bar matrices, mini

Length 66 mm

Grilon BS/ Brass

046.152

Deactivator for Dolder ® bar matrices, regular

Length 66 mm

Grilon BS/ Brass

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

025.0911-04

NC/RC Stabilization pin for bar on Multi-base abutment

Length 16 mm

Stainless steel

Components for gold bars

PROSTHETICS HYBRID DENTURES

Auxiliary parts

HYBRID DENTURES REGULAR CrossFit® BAR

Art. No.

Article

Dimensions

Material

022.4702

RC Abutment for bars

Height 10 mm

022.4741

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 1 mm

TAN

022.4742

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 2.5 mm

TAN

022.4744

RC Multi-base abutment straight

Ø 4.5 mm, Gingiva height 4 mm

TAN

022.4761

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 1 mm

TAN

022.4762

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 2.5 mm

TAN

022.4764

RC Multi-base abutment straight

Ø 6.5 mm, Gingiva height 4 mm

TAN

022.4782

RC Multi-base abutment angled 25°, type A

Ø 4 mm, Gingiva height 2.5 mm

TAN

022.4786

RC Multi-base abutment angled 25°, type B

Ø 4 mm, Gingiva height 2.5 mm

TAN

023.4746

RC Coping for bar on Multi-base abutment, straight

Ø 4.5 mm

023.4766

RC Coping for bar on Multi-base abutment, straight

Ø 6.5 mm

023.4706

RC Coping for bar on Multi-base abutment, angled 25°

Ø 4 mm

Components for titanium bars

PROSTHETICS HYBRID DENTURES

HYBRID DENTURES REGULAR CrossFit® BAR

Art. No.

Article

Dimensions

Material

048.466

Titanium bar egg-shaped cross-section, mini

Length 50 mm, Height 2.3 mm

048.465

Titanium bar egg-shaped cross-section, regular

Length 50 mm, Height 3 mm

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

048.461

Plastic bar egg-shaped cross-section, mini

Length 80 mm, Height 2.3 mm

PMMA

048.460

Plastic bar egg-shaped cross-section, regular

Length 80 mm, Height 3 mm

PMMA

048.471

Titanium bar matrix includes spacer, mini

Length 50 mm, Height 3.5 mm

Ti/Brass

048.470

Titanium bar matrix includes spacer, regular

Length 50 mm, Height 4.5 mm

Ti/Brass

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

Components for titanium bars

PROSTHETICS HYBRID DENTURES

Auxiliary parts

HYBRID DENTURES REGULAR CrossFit® AUXILIARY PARTS

Art. No.

Article

Dimensions

Material

025.4920 025.4920-04

RC Polishing aid

Length 16 mm

Stainless steel

025.4900

RC Basal screw

Length 7.9 mm

TAN

025.0900-04

NC/RC Occlusal screw for coping on Multi-base abutment

Length 4.5 mm

TAN

025.0911-04

NC/RC Stabilization pin for bar on Multi-base abutment

Length 16 mm

Stainless steel

046.239

Analog holder

Length 105 mm

Al/Steel

Auxiliary parts

PROSTHETICS HYBRID DENTURES Important RC prosthetic components can only be used with Straumann ® Bone Level Implants, Ø 4.1 and Ø 4.8mm, Regular CrossFit ® . 204

STRAUMANN® CLASSIC INTRODUCTION

When patients and dentists decide on a dental implant, they rely entirely on the product. As a manufacturer of dental implants, Straumann has been well acquainted with these demands for almost 40 years. Straumann’s commitment – As a pioneer in implant dentistry, Straumann is committed to supporting the millions of patients with Straumann dental implants and original prosthetic components as exclusive distributor. Implant-borne prosthetic products show signs of wear over a long period, just like crowns and bridges on natural teeth. Straumann is therefore launching Straumann ® Classic components. Straumann® Classic stands for Confidence Reliability Durability Peace of mind Straumann® Classic is Straumann’s commitment to supply prosthetic components for all Straumann implant types listed in this catalog in the event of the need for a repeat restoration. If your patient received a Straumann implant after 1974, you can order an appropriate

PROSTHETICS STRAUMANN ® CLASSIC

prosthetic component through Straumann® Classic. Straumann® Classic – An additional service for patients and dentists who trust Straumann products. For a smooth and rapid repeat restoration with Straumann® Classic components, contact Straumann and ask for our system experts.

1250

Manufacturer Diener AG Precision Machining CH-8424 Embrach Switzerland

Exclusively distributed by Institut Straumann AG, CH-4002 Basel, Switzerland 205

STRAUMANN® CLASSIC GENERAL GUIDELINES

Various prosthetic reconstruction options are possible for new restorations of implants (1974 –1999). Prosthetic components and remanufactured Straumann® Classic components from this catalog are available for the implant types listed in this catalog. Straumann ® Classic components are indicated by a “C” at the end of the article number. Recommendation for repeat restorations Please use articles from the current Straumann Product Catalog as a first choice; only use the Straumann® Classic products indicated by a “C” if you require specific characteristics.

PROSTHETICS STRAUMANN ® CLASSIC 206

STRAUMANN® CLASSIC C, E, F, H AND K IMPLANT TYPES

Art. No.

Article

Dimensions

Material

The following articles are required to restore these implant types with prosthetic components: 040.919C

Classic Set, type C, E, F, H and K set contents: Implant analog, Occlusal screw, 9° impression cap, Gold coping

Stainless steel/Ti/Al/ Ceramicor ® *

PROSTHETICS STRAUMANN ® CLASSIC

* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.

● ●

Manufactured from 1974 to 1980 Indications: These implant types were mainly used for bar solutions, but also for crown and bridge solutions

207

STRAUMANN® CLASSIC

TPS IMPLANT TYPE, ONE-PART IMPLANT

Art. No.

Article

Dimensions

Material

The following articles are required to restore these implant types with prosthetic components: 040.920C

Classic Set, TPS implant type set contents: TPS implant analog, TPS occlusal screw, L 4 mm, TPS impression cap, TPS gold coping

* = Elitor® is a precious metal alloy for soldering and laser welding of precious metal alloys.

PROSTHETICS STRAUMANN ® CLASSIC ● ●

Manufactured from 1980 to 1996 Indication: This implant type was used for one-part bar solutions

208

Stainless steel/Ti/Al/ Elitor ® *

STRAUMANN® CLASSIC

8° IMPLANT TYPE, ONE-PART IMPLANT

Art. No.

Article

Dimensions

Material

The following articles are required to restore these implant types with prosthetic components: 040.921C

Classic Set, 8° type set contents: Implant analog for 8º bar head, SCS Occlusal screw, L 4 mm, Impression cap for 8º bar head, Implant protective cap for 8º bar head, Gold coping

Stainless steel/Ti/Al/ PEEK/ Ceramicor ® *

PROSTHETICS STRAUMANN ® CLASSIC

* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.

● ● ●

Manufactured from 1994 to 1999 Indication: This implant type was used for bar solutions Prosthetic restorations for monotype 8° implant also possible 209

STRAUMANN® CLASSIC

BONEFIT 45° SHOULDER IMPLANT TYPE

The following articles are required to restore this implant type with prosthetic components: Art. No.

Article

Dimensions

Material

Restoration for fixed, cement-retained crowns and bridges 048.483C

Abutment, angled 15º

048.484C

Abutment, angled 20º

Restoration for fixed, screw-retained crowns and bridges 048.404C

Octa abutment

Height 1.5 mm

Classic Set, Octa type 040.922C

Classic Set, Octa type set contents: RN implant analog, SCS Guide screw, Octa impression cap

Stainless steel/Ti/Al

Restoration for dentures — Bar on Octa abutment 048.404C

Octa abutment

Height 1.5 mm

PROSTHETICS STRAUMANN ® CLASSIC ● ●

Manufactured from 1989 to 1998 Indication: This implant type was used for screw-retained or cement-retained crowns, bridges, and telescopic and bar solutions

For screw-retained repeat restorations, one impression set is required per implant. synOcta ® copings can be used according to current Straumann ® Product Catalog.

LOCATOR ® (article according to current Straumann ® Product Catalog) 210

STRAUMANN® CLASSIC

30°/45° SHOULDER HOLLOW CYLINDER IMPLANTS WITH LABIAL BEVEL — WITH ANGULATION, WITHOUT ANGULATION

Art. No.

Article

Dimensions

Material

The following articles are required to restore these implant types with prosthetic components: Abutment, angled 15º

048.484C

Abutment, angled 20º

PROSTHETICS STRAUMANN ® CLASSIC

048.483C

● ●

●

Manufactured from 1988 to 1995 Indication: This implant type was used for cement-retained crowns and bridges; for implants with angulation, the placement of angled abutments is not recommended Solid abutment (article according to current Straumann ® Product Catalog) 211

STRAUMANN® CLASSIC

OCTA IMPLANT, 45°, ONE-PART IMPLANT

Art. No.

Article

Dimensions

Material

The following articles are required to restore these implant types with prosthetic components: 040.922C

Classic Set, Octa type set contents: RN implant analog, SCS Guide screw, Octa impression cap

PROSTHETICS STRAUMANN ® CLASSIC ● ●

Manufactured from 1995 to 1999 Indication: this implant type was used for bar solutions

synOcta ® copings can be used according to current Straumann ® Product Catalog.

212

Stainless steel/Ti/Al

STRAUMANN® CLASSIC

INSTRUMENTS AND OTHER COMPONENTS

Art. No.

Article

Dimensions

Material

Instruments 046.045C

Driver for Octa abutment

Stainless steel

046.114C

Cross-tip screwdriver

Stainless steel

048.220C

Plastic coping for abutment 8°

POM

048.232C

TS gold coping for Octa

Ceramicor ® *

048.304C

Occlusal screw

Length 15 mm

048.312C

TPS occlusal screw

Length 8 mm

048.424C

Pin abutment

Ceramicor ® *

048.448C

TS post for Octa

Other components that can be ordered

PROSTHETICS STRAUMANN ® CLASSIC

* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.

The application area for the instruments is given on the next page. 213

STRAUMANN® CLASSIC

APPLICATION AREA FOR COMPONENTS

The following list gives an overview of which implant types each of the components can be used for.

PROSTHETICS STRAUMANN ® CLASSIC

Article

Description

046.114C

Cross-tip screwdriver

048.304C

Occlusal screw, L 15 mm

048.312C

TPS occlusal screw, L 8 mm

048.220C

Plastic coping for abutment 8º

046.045C

Driver for Octa abutment

048.448C

TS post for Octa

048.404C

Octa abutment, H 1.5 mm

048.232C

TS gold coping for Octa

048.424C

Pin abutment

048.483C

Abutment, angled 15º

048.484C

Abutment, angled 20°

(048.672)

(synOcta ® thread protection screw)

(049.154)

(Transversal screw)

(046.420)

(TS screwdriver)

C, E, F, H and K 

TPS

Mono 8°

Octa TS post

Bonefit 45°



For a smooth and rapid repeat restoration with Straumann® Classic components, contact Straumann and ask for our system experts.

214

Octa post



    



 

SERVICE

216

SERVICE

Service materials

SERVICE MATERIALS

Art. No.

Article

Material

140.122

Straumann ® Standard Plus NNC Implant consisting of: NNC Standard Plus implant, NNC Healing cap with labial bevel, NNC Impression post for open tray, NNC Implant analog, NNC Cementable angled abutment, NNC Solid abutment, NNC Impression cap for Solid abutment, NNC Positioning cylinder, SCS Screwdriver, plastic box

Metal/Plastic

140.120

Illustration model: Straumann ® Standard Implant Illustration of Straumann ® Standard Implant vs. a 3-unit bridge. The kit constists of: a jaw section showing a missing premolar, removable Straumann ® Standard Implant, removable solid abutment), removable 3unit bridge, screwdriver to insert/remove the implant, 1:1 model of the Straumann ® Standard Implant and a premolar

Metal/Plastic

140.024

synOcta ® system consisting of: Standard Plus Implant, RN Impression cap, RN synOcta ® positioning cylinder, RN synOcta ® analog, RN synOcta ® abutment, SCS Screwdriver, RN synOcta ® gold coping with plastic crown, SCS Occlusal screw, plastic box

Metal/Plastic

120.0033

Straumann ® Bone Level Implant consisting of: RC Implant, RC Healing abutment, bottle shape, RC Impression post for open tray, RC Analog, RC Anatomic abutment, angled 15°, occlusal screw, SCS Screwdriver, plastic box

Metal/Plastic

140.062

Straumann ® Tapered Effect Implant Ø 4.1 mm, RN, SLA ® 10 mm, cardboard box

Stainless steel

5:1 Models

SERVICE SERVICE MATERIALS

216

SERVICE MATERIALS

Art. No.

Article

Material

140.032

Lower jaw edentulous, with 2 implants, (S Ø 4.1 mm, RN)

Plastic, acrylic-glass/ Ti

140.049

Lower jaw edentulous, with 4 implants, (S Ø 4.1 mm, RN)

Plastic, acrylic-glass/ Ti

140.033

Upper jaw two single-tooth gaps and unilateral free-end saddle, with 4 implants 1 x Standard Plus implant Ø 3.3 mm, NN 1 x Standard implant Ø 4.8 mm, WN 1 x Standard implant Ø 4.1 mm, RN 1 x Standard implant Ø 4.8 mm, RN

Plastic, acrylic-glass/ Ti

SERVICE SERVICE MATERIALS

1:1 Models

217

SERVICE MATERIALS

For all users Product catalog Product information For surgical dentists and surgeons Surgical information ITI Consensus Paper For prosthetic dentists and dental technicians Prosthetic information ITI Consensus Paper Our detailed documentation will assist you in carefully planning your implant-based restoration. Ask your customer service representative.

SERVICE SERVICE MATERIALS 218

Numerical index

220

Alphabetical index

239

INDEX

NUMERICAL INDEX

INDEX NUMERICAL INDEX

Ar t. No.

Ar ticle

019.0050

Straumann® CARES® Wax-up kit for Camlog®

87, 151

019.0051

Straumann® CARES® Wax-up kit for NobelReplace™

87, 151

019.0063

Straumann® CARES® Wax-up kit

87, 151

021.2208G

Bone Level Implant

021.2210G

Bone Level Implant

021.2212G

Bone Level Implant

021.2308

Bone Level Implant

021.2310

Bone Level Implant

021.2312

Bone Level Implant

021.2314

Bone Level Implant

021.2408

Bone Level Implant

021.2410

Bone Level Implant

021.2412

Bone Level Implant

021.2414

Bone Level Implant

021.2508

Bone Level Implant

021.2510

Bone Level Implant

021.2512

Bone Level Implant

021.2514

Bone Level Implant

021.4108G

Bone Level Implant

021.4110G

Bone Level Implant

021.4112G

Bone Level Implant

021.4308

Bone Level Implant

021.4310

Bone Level Implant

021.4312

Bone Level Implant

021.4314

Bone Level Implant

021.4408

Bone Level Implant

021.4410

Bone Level Implant

021.4412

Bone Level Implant

021.4414

Bone Level Implant

021.4508

Bone Level Implant

021.4510

Bone Level Implant

021.4512

Bone Level Implant

021.4514

Bone Level Implant

021.6108G

Bone Level Implant

021.6110G

Bone Level Implant

021.6112G

Bone Level Implant

021.6308

Bone Level Implant

021.6310

Bone Level Implant

021.6312

Bone Level Implant

021.6314

Bone Level Implant

021.6408

Bone Level Implant

021.6410

Bone Level Implant

021.6412

Bone Level Implant

021.6414

Bone Level Implant

021.6508

Bone Level Implant

021.6510

Bone Level Implant

021.6512

Bone Level Implant

021.6514

Bone Level Implant

022.2102

NC Anatomic abutment

155

022.2104

NC Anatomic abutment

155

022.2152

NC Anatomic abutment

155

022.2154

NC Anatomic abutment

155

022.2202

NC Meso abutment

155

022.2311

NC Cementable abutment

158

022.2312

NC Cementable abutment

158

022.2313

NC Cementable abutment

158

022.2315

NC Cementable abutment

158

022.2316

NC Cementable abutment

158

022.2317

NC Cementable abutment

158

022.2321

NC Cementable abutment

159

022.2322

NC Cementable abutment

159

022.2323

NC Cementable abutment

159

022.2325

NC Cementable abutment

159

022.2326

NC Cementable abutment

159

022.2327

NC Cementable abutment

159

022.2410

NC Gold abutment

154

022.2502

NC LOCATOR® Abutment

185

220

Page

NUMERICAL INDEX

Ar t. No.

Ar ticle

022.2503

NC LOCATOR® Abutment

Page 185

022.2504

NC LOCATOR® Abutment

185

022.2505

NC LOCATOR® Abutment

185

022.2506

NC LOCATOR® Abutment

185

022.2701

NC Abutment

189

022.2702

NC Abutment

022.2731

NC Multi-base abutment

163, 189, 191

022.2732

NC Multi-base abutment

163, 189, 191

022.2734

NC Multi-base abutment

163, 189, 191

022.2741

NC Multi-base abutment

163, 189, 191

022.2742

NC Multi-base abutment

163, 189, 191

022.2744

NC Multi-base abutment

163, 189, 191

022.2745

NC Screw-retained abutment

164

022.2746

NC Screw-retained abutment

164

022.2747

NC Screw-retained abutment

164

022.2748

NC Screw-retained abutment

164

022.2749

NC Screw-retained abutment

164

022.2750

NC Screw-retained abutment

164

022.2751

NC Screw-retained abutment

164

022.2752

NC Screw-retained abutment

164

022.2753

NC Screw-retained abutment

164

022.2754

NC Screw-retained abutment

164

022.2755

NC Screw-retained abutment

164

022.2756

NC Screw-retained abutment

164

022.2757

NC Screw-retained abutment

164

022.2758

NC Screw-retained abutment

022.2782

NC Multi-base abutment

163, 189, 191 163, 189, 191

191

164

022.2786

NC Multi-base abutment

022.2812

NC Straumann® Anatomic IPS e.max® abutment

154

022.2814

NC Straumann® Anatomic IPS e.max® abutment

154

022.2822

NC Straumann® Anatomic IPS e.max® abutment

154

022.2824

NC Straumann® Anatomic IPS e.max® abutment

154

022.2832

NC Straumann® Anatomic IPS e.max® abutment

154

022.2834

NC Straumann® Anatomic IPS e.max® abutment

154

022.2842

NC Straumann® Anatomic IPS e.max® abutment

154

022.2844

NC Straumann® Anatomic IPS e.max® abutment

154

022.4102

RC Anatomic abutment

171

022.4104

RC Anatomic abutment

171

022.4152

RC Anatomic abutment

171

022.4154

RC Anatomic abutment

171

022.4202

RC Meso abutment

171

022.4321

RC Cementable abutment

174

022.4322

RC Cementable abutment

174

022.4323

RC Cementable abutment

174

022.4325

RC Cementable abutment

174

022.4326

RC Cementable abutment

174

022.4327

RC Cementable abutment

174

022.4331

RC Cementable abutment

175

022.4332

RC Cementable abutment

175

022.4333

RC Cementable abutment

175

022.4335

RC Cementable abutment

175

022.4336

RC Cementable abutment

175

022.4337

RC Cementable abutment

175

022.4410

RC Gold abutment

170

022.4430

RC Gold abutment

170

022.4501

RC LOCATOR® Abutment

194

022.4502

RC LOCATOR® Abutment

194

022.4503

RC LOCATOR® Abutment

194

022.4504

RC LOCATOR® Abutment

194

022.4505

RC LOCATOR® Abutment

194

022.4506

RC LOCATOR® Abutment

194

022.4701

RC Abutment

200

022.4702

RC Abutment

022.4741

RC Multi-base abutment

179, 200, 202

022.4742

RC Multi-base abutment

179, 200, 202

022.4744

RC Multi-base abutment

179, 200, 202

022.4745

RC Screw-retained abutment

180

221

INDEX NUMERICAL INDEX

202

NUMERICAL INDEX

INDEX NUMERICAL INDEX

Ar t. No.

Ar ticle

022.4746

RC Screw-retained abutment

180

022.4747

RC Screw-retained abutment

180

022.4748

RC Screw-retained abutment

180

022.4749

RC Screw-retained abutment

180

022.4750

RC Screw-retained abutment

180

022.4751

RC Screw-retained abutment

180

022.4752

RC Screw-retained abutment

180

022.4753

RC Screw-retained abutment

180

022.4754

RC Screw-retained abutment

180

022.4755

RC Screw-retained abutment

022.4761

RC Multi-base abutment

179, 200, 202

022.4762

RC Multi-base abutment

179, 200, 202

022.4764

RC Multi-base abutment

179, 200, 202

022.4782

RC Multi-base abutment

179, 200, 202

022.4786

RC Multi-base abutment

179, 200, 202

022.4812

RC Straumann® Anatomic IPS e.max® abutment

170

022.4814

RC Straumann® Anatomic IPS e.max® abutment

170

022.4822

RC Straumann® Anatomic IPS e.max® abutment

170

022.4824

RC Straumann® Anatomic IPS e.max® abutment

170

022.4832

RC Straumann® Anatomic IPS e.max® abutment

170

022.4834

RC Straumann® Anatomic IPS e.max® abutment

170

022.4842

RC Straumann® Anatomic IPS e.max® abutment

170

022.4844

RC Straumann® Anatomic IPS e.max® abutment

170

023.2310

NC Coping

162

023.2316

NC Coping

162

023.2320

NC Coping

162

023.2326

NC Coping

162

023.2701

NC Coping

167

023.2702

NC Coping

189

023.2704

NC Coping

167

023.2706

NC Coping

191

023.2731

NC Coping

167

023.2732

NC Coping

189

023.2734

NC Coping

167

023.2736

NC Coping

191

023.2741

NC Coping

167

023.2742

NC Coping

189

023.2744

NC Coping

167

023.2746

NC Coping

191

023.2747

NC Coping

167

023.2748

NC Burn-out coping

167

023.2749

NC Coping

167

023.2750

NC Coping

167

023.2754

NC Analog

165

023.2755

NC Burn-out coping

167

023.2756

NC Burn-out coping

156

023.4320

RC Coping

178

023.4326

RC Coping

178

023.4330

RC Coping

178

023.4336

RC Coping

178

023.4701

RC Coping

183

023.4702

RC Coping

200

023.4704

RC Coping

183

023.4706

RC Coping

202

023.4741

RC Coping

183

023.4742

RC Coping

200

023.4744

RC Coping

183

023.4746

RC Coping

202

023.4747

NC/RC Coping

023.4748

NC/RC Burn-out coping

167, 183

023.4749

NC/RC Screw

168, 184

023.4750

NC/RC Screw

168, 184

023.4751

NC/RC Coping

023.4752

NC/RC Coping

184

023.4756

NC/RC Analog

165, 181

023.4757

NC/RC Analog

165, 181

023.4758

NC Burn-out coping

167, 183

222

Page

180

184

NUMERICAL INDEX

Ar t. No.

Ar ticle

023.4759

RC Burn-out coping

Page

023.4760

NC/RC Screw

023.4761

RC Coping

023.4762

RC Coping

023.4763

NC/RC Occlusal screw

023.4764

RC Coping

183

023.4766

RC Coping

202

024.2100S

Sterile NC Closure cap

024.2105S

Sterile NC Closure cap

024.2222S

Sterile NC Healing abutment

024.2224S

Sterile NC Healing abutment

024.2226S

Sterile NC Healing abutment

024.2234S

Sterile NC Healing abutment

024.2236S

Sterile NC Healing abutment

024.2242S

Sterile NC Healing abutment

024.2244S

Sterile NC Healing abutment

024.2246S

Sterile NC Healing abutment

024.2270S

Sterile NC Healing abutment

024.2306-04

NC Protective cap

166

024.2307

NC Temporary coping

166

024.2312-04

NC Protective cap

161

024.2316-04

NC Protective cap

161

024.2322-04

NC Protective cap

161

024.2323-04

NC Protective cap

166

024.2324-04

NC Protective cap

166

024.2325-04

NC Protective cap

166

024.2326-04

NC Protective cap

161

024.2331-04

NC Protective cap

166

024.2332

NC Temporary coping

166

024.2341-04

NC Protective cap

166

024.2342

NC Temporary coping

166

024.2346

NC Temporary coping

161

024.2356

NC Temporary coping

161

024.2371

NC Temporary abutment

152

024.2372

NC Temporary Abutment VITA CAD-Temp速

152

024.2375

NC Temporary abutment

024.4100S

Sterile RC Closure cap

38, 40

024.4105S

Sterile RC Closure cap

38, 40

024.4222S

Sterile RC Healing abutment

38, 40

024.4224S

Sterile RC Healing abutment

38, 40

024.4226S

Sterile RC Healing abutment

38, 40

024.4234S

Sterile RC Healing abutment

38, 40

024.4236S

Sterile RC Healing abutment

39, 41

024.4242S

Sterile RC Healing abutment

39, 41

024.4244S

Sterile RC Healing abutment

39, 41

024.4246S

Sterile RC Healing abutment

39, 41

024.4270S

Sterile RC Healing abutment

39, 41

024.4306-04

RC Protective cap

182

024.4307

RC Temporary coping

182

024.4322-04

RC Protective cap

177

024.4323-04

NC/RC Protective cap

182

024.4324-04

NC/RC Protective cap

182

024.4325-04

NC/RC Protective cap

182

024.4326-04

RC Protective cap

177

024.4332-04

RC Protective cap

177

024.4336-04

RC Protective cap

177

024.4341-04

RC Protective cap

182

024.4342

RC Temporary coping

182

024.4356

RC Temporary coping

177

024.4361-04

RC Protective cap

182

024.4362

RC Temporary coping

182

024.4366

RC Temporary coping

177

024.4371

RC Temporary abutment

169

024.4372

RC Temporary Abutment VITA CAD-Temp速

169

024.4375

RC Temporary abutment

169

025.0000

CARES速 Mono Scanbody

166

025.0001

CARES速 Mono Scanbody

182

172 168, 184 183 200 168, 184

223

INDEX NUMERICAL INDEX

152

NUMERICAL INDEX

INDEX NUMERICAL INDEX

Ar t. No.

Ar ticle

025.0120-04

LOCATOR® Female analog

025.0900-04

NC/RC Occlusal screw

025.0911-04

NC/RC Stabilization pin

025.2101

NC Implant analog

025.2102

NC Repositionable implant analog

025.2106

NC Implant analog

165

025.2112

NC Implant analog

160

025.2116

NC Implant analog

160

025.2122

NC Implant analog

160

025.2126

NC Implant analog

160

025.2131

NC Implant analog

165

025.2141

NC Implant analog

165

025.2201

NC Impression post

152

025.2202

NC Impression post

152

025.2203-04

NC Impression cap

160

025.2204-04

NC Impression cap

160

025.2205

NC Impression post

152

025.2206

NC Impression post

165

025.2208-04

NC Bite registration aid

152

025.2212-04

NC Bite registration aid

152

025.2220-04

NC Impression cap

160

025.2231-04

NC Impression cap

165

025.2232

NC Impression post

165

025.2241-04

NC Impression cap

165

025.2242

NC Impression post

165

025.2243

Impression post for open tray

165

025.2244

Impression post for open tray

181

025.2245

Closed tray impression post

165

025.2246

Closed tray impression post

181

025.2601-04

NC PLAN Anatomic abutment

141

025.2602-04

NC PLAN Anatomic abutment

141

025.2603-04

NC PLAN Anatomic abutment

141

025.2604-04

NC PLAN Anatomic abutment

141

025.2610-04

NC PLAN Gold abutment

141

025.2611-04

NC PLAN Cementable abutment

142

025.2612-04

NC PLAN Cementable abutment

142

025.2613-04

NC PLAN Cementable abutment

142

025.2615-04

NC PLAN Cementable abutment

142

025.2616-04

NC PLAN Cementable abutment

142

025.2617-04

NC PLAN Cementable abutment

142

025.2621-04

NC PLAN Cementable abutment

142

025.2622-04

NC PLAN Cementable abutment

142

025.2623-04

NC PLAN Cementable abutment

142

025.2625-04

NC PLAN Cementable abutment

142

025.2626-04

NC PLAN Cementable abutment

142

025.2627-04

NC PLAN Cementable abutment

142

025.2642-04

NC PLAN LOCATOR® Abutment

147

025.2643-04

NC PLAN LOCATOR® Abutment

147

025.2644-04

NC PLAN LOCATOR® Abutment

147

025.2645-04

NC PLAN LOCATOR® Abutment

147

025.2646-04

NC PLAN LOCATOR® Abutment

147

025.2648-04

NC PLAN Screw-retained abutment

144

025.2650-04

NC PLAN Screw-retained abutment

144

025.2651-04

NC PLAN Multi-base abutment

144

025.2652-04

NC PLAN Multi-base abutment

144

025.2653-04

NC PLAN Screw-retained abutment

145

025.2654-04

NC PLAN Multi-base abutment

144

025.2655-04

NC PLAN Screw-retained abutment

144

025.2656-04

NC PLAN Multi-base abutment

144

025.2657-04

NC PLAN Multi-base abutment

144

025.2658-04

NC PLAN Screw-retained abutment

144

025.2659-04

NC PLAN Multi-base abutment

144

025.2660-04

NC PLAN Screw-retained abutment

145

025.2662-04

NC PLAN Multi-base abutment

144

025.2665-04

NC PLAN Multi-base abutment

144

224

Page 188, 197 168, 184, 190, 192, 193, 201, 203, 204 190, 193, 201, 204 152 150, 152

NUMERICAL INDEX

Ar t. No.

Ar ticle

025.2900

NC Basal screw

Page

025.2901-04

NC Scanbody

150

025.2903

NC Wax-up sleeve

150

025.2905

NC Straumann® Scanbody

150

025.2906

NC Basal screw

150

025.2908

NC Basal screw

162

025.2911-04

NC Transfer aid

162

025.2912-04

NC Transfer aid

025.2915

CARES® NC Mono Scanbody

025.2920

NC Polishing aid

025.2921

NC Variobase™ Abutment

156

025.2926

NC/RC SRBB Bone Level screw

150

025.4101

RC Implant analog

025.4102

RC Repositionable implant analog

025.4106

RC Implant analog

181

025.4122

RC Implant analog

176

025.4126

RC Implant analog

176

025.4132

RC Implant analog

176

025.4136

RC Implant analog

176

025.4141

RC Implant analog

181

025.4161

RC Implant analog

181

025.4201

RC Impression post

169

025.4202

RC Impression post

169

025.4203-04

RC Impression cap

176

025.4204-04

RC Impression cap

176

025.4205

RC Impression post

169

025.4206

RC Impression post

181

025.4208-04

RC Bite registration aid

169

025.4212-04

RC Bite registration aid

169

025.4220-04

RC Impression cap

176

025.4230-04

RC Impression cap

176

025.4241-04

RC Impression cap

181

025.4242

RC Impression post

181

025.4261-04

RC Impression cap

181

025.4262

RC Impression post

181

025.4601-04

RC PLAN Anatomic abutment

141

025.4602-04

RC PLAN Anatomic abutment

141

025.4603-04

RC PLAN Anatomic abutment

141

025.4604-04

RC PLAN Anatomic abutment

141

025.4610-04

RC PLAN Gold abutment

141

025.4621-04

RC PLAN Cementable abutment

143

025.4622-04

RC PLAN Cementable abutment

143

025.4623-04

RC PLAN Cementable abutment

143

025.4625-04

RC PLAN Cementable abutment

143

025.4626-04

RC PLAN Cementable abutment

143

025.4627-04

RC PLAN Cementable abutment

143

025.4630-04

RC PLAN Gold abutment

141

025.4631-04

RC PLAN Cementable abutment

143

025.4632-04

RC PLAN Cementable abutment

143

025.4633-04

RC PLAN Cementable abutment

143

025.4635-04

RC PLAN Cementable abutment

143

025.4636-04

RC PLAN Cementable abutment

143

025.4637-04

RC PLAN Cementable abutment

143

025.4641-04

RC PLAN LOCATOR® Abutment

147

025.4642-04

RC PLAN LOCATOR® Abutment

147

025.4643-04

RC PLAN LOCATOR® Abutment

147

025.4644-04

RC PLAN LOCATOR® Abutment

147

025.4645-04

RC PLAN LOCATOR® Abutment

147

025.4646-04

RC PLAN LOCATOR® Abutment

147

025.4648-04

RC PLAN Screw-retained abutment

146

025.4649-04

RC PLAN Screw-retained abutment

146

025.4650-04

RC PLAN for Screw-retained abutment,

146

025.4651-04

RC PLAN Multi-base abutment

146

025.4652-04

RC PLAN Multi-base abutment

146

025.4653-04

RC PLAN Screw-retained abutment

146

025.4654-04

RC PLAN Multi-base abutment

146

150, 153, 155, 156, 168, 192, 193

162 150, 156 155, 168, 193

169

225

INDEX NUMERICAL INDEX

151, 169

NUMERICAL INDEX

Ar t. No.

Ar ticle

025.4656-04

RC PLAN Multi-base abutment

Page 146

025.4657-04

RC PLAN Multi-base abutment

146

025.4659-04

RC PLAN Multi-base abutment

146

025.4660-04

RC PLAN Screw-retained abutment

146

025.4662-04

RC PLAN Multi-base abutment

146

025.4665-04

RC PLAN Multi-base abutment

025.4900

RC Basal screw

025.4901-04

RC Scanbody

025.4902

RC Basal screw

146 150, 169, 171, 172, 184, 190, 201, 203, 204 151 171, 184

INDEX NUMERICAL INDEX

025.4903

RC Wax-up sleeve

150

025.4905

RC Straumann® Scanbody

151

025.4906

RC Basal screw

150

025.4908

RC Basal screw

178, 184

025.4912-04

RC Transfer aid

178

025.4913-04

RC Transfer aid

025.4915

CARES® RC Mono Scanbody

025.4920

RC Polishing aid

025.4921

RC Variobase™ Abutment

172

026.0101

Bone Level PLAN set

141

026.0102

Bone Level PLAN cassette

141

026.0901

Bone Level Implant distance indicator

026.2048

48h Explantation device

026.2303

BL/NNC Profile drill

026.2306

BL/NNC Profile drill

026.2310

BL/TE/NNC Tap

026.2503

BL/NNC Profile drill

026.2510

BL/TE/NNC Tap

026.2558

Release aid N for Loxim™

026.2801

NC Guiding cylinder

026.4048

48h Explantation device

026.4303

BL Profile drill

026.4306

BL Profile drill

026.4310

BL/TE Tap

026.4503

BL Profile drill

026.4510

BL/TE Tap

026.4558

Release aid R/W for Loxim™

026.4801

RC Guiding cylinder

026.6303

BL Profile drill

026.6306

BL Profile drill

026.6310

BL/TE Tap

026.6503

BL Profile drill

026.6510

BL/TE Tap

026.6801

RC Guiding cylinder

027.4301

NC Cementable All-in-One Set

157

027.4302

NC Cementable All-in-One Set

157

027.4303

NC Cementable All-in-One Set

157

027.4307

NC Cementable All-in-One Set

157

027.4308

NC Cementable All-in-One Set

157

027.4309

NC Cementable All-in-One Set

157

027.4310

NC Cementable All-in-One Set

157

027.4311

NC Cementable All-in-One Set

157

027.4312

NC Cementable All-in-One Set

157

027.4313

RC Cementable All-in-One Set

173

027.4314

RC Cementable All-in-One Set

173

027.4315

RC Cementable All-in-One Set

173

027.4316

RC Cementable All-in-One Set

173

027.4317

RC Cementable All-in-One Set

173

027.4318

RC Cementable All-in-One Set

173

027.4319

RC Cementable All-in-One Set

173

027.4320

RC Cementable All-in-One Set

173

027.4321

RC Cementable All-in-One Set

173

027.4322

RC Cementable All-in-One Set

174

027.4323

RC Cementable All-in-One Set

174

027.4324

RC Cementable All-in-One Set

174

031.001S

Straumann® PURE Ceramic Implant

031.002S

Straumann® PURE Ceramic Implant

226

178 151, 172 171, 184, 204

NUMERICAL INDEX

Ar ticle

031.003S

Straumann® PURE Ceramic Implant

Page 44

031.004S

Straumann® PURE Ceramic Implant

031.011S

Straumann® PURE Ceramic Implant

031.012S

Straumann® PURE Ceramic Implant

031.013S

Straumann® PURE Ceramic Implant

031.014S

Straumann® PURE Ceramic Implant

031.021S

Straumann® PURE Ceramic Implant

031.022S

Straumann® PURE Ceramic Implant

031.023S

Straumann® PURE Ceramic Implant

031.024S

Straumann® PURE Ceramic Implant

031.031S

Straumann® PURE Ceramic Implant

031.032S

Straumann® PURE Ceramic Implant

031.033S

Straumann® PURE Ceramic Implant

031.034S

Straumann® PURE Ceramic Implant

031.102

ND Position indicator

031.103

ND Position indicator

031.112

ND Position indicator

031.113

ND Position indicator

031.123

RD Position indicator

031.125

RD Position indicator

031.143

RD Position indicator

031.145

RD Position indicator

031.200

ND Implant Analog

031.201

ND Implant Analog

031.210

RD Analog

031.211

RD Analog

031.250

ND Impression Cap

031.251

ND Impression Cap

031.260

RD Impression cap

031.261

RD Impression cap

031.300

ND Temporary Coping

031.301

ND Temporary Coping

031.310

RD Temporary coping

031.311

RD Temporary coping

031.320

ND Protective Cap

031.321

ND Protective Cap

031.330

Protective cap

031.331

Protective cap

033.031G

Standard Implant

033.032G

Standard Implant

033.033G

Standard Implant

033.043S

Standard Plus Implant

033.044S

Standard Plus Implant

033.045S

Standard Plus Implant

033.051G

Standard Plus Implant

033.052G

Standard Plus Implant

033.053G

Standard Plus Implant

033.251G

Standard Plus Implant

033.252G

Standard Plus Implant

033.253G

Standard Plus Implant

033.416S

Standard Plus Implant

033.417S

Standard Plus Implant

033.418S

Standard Plus Implant

033.419S

Standard Plus Implant

033.431G

Standard Implant

033.432G

Standard Implant

033.433G

Standard Implant

033.451G

Standard Plus Implant

033.452G

Standard Plus Implant

033.453G

Standard Plus Implant

033.501S

Standard Implant

033.502S

Standard Implant

033.503S

Standard Implant

033.504S

Standard Implant

033.505S

Standard Implant

033.511S

Standard Plus Implant

033.512S

Standard Plus Implant

227

INDEX NUMERICAL INDEX

Ar t. No.

NUMERICAL INDEX

INDEX NUMERICAL INDEX

Ar t. No.

Ar ticle

033.513S

Standard Plus Implant

033.514S

Standard Plus Implant

033.521S

Tapered Effect Implant

033.522S

Tapered Effect Implant

033.523S

Tapered Effect Implant

033.524S

Tapered Effect Implant

033.530S

Standard Implant

033.531S

Standard Implant

033.532S

Standard Implant

033.533S

Standard Implant

033.534S

Standard Implant

033.535S

Standard Implant

033.560S

Standard Plus Implant

033.561S

Standard Plus Implant

033.562S

Standard Plus Implant

033.563S

Standard Plus Implant

033.564S

Standard Plus Implant

033.571S

Tapered Effect Implant

033.572S

Tapered Effect Implant

033.573S

Tapered Effect Implant

033.574S

Tapered Effect Implant

033.580S

Standard Implant

033.581S

Standard Implant

033.582S

Standard Implant

033.583S

Standard Implant

033.584S

Standard Implant

033.590S

Standard Plus Implant

033.591S

Standard Plus Implant

033.592S

Standard Plus Implant

033.593S

Standard Plus Implant

033.594S

Standard Plus Implant

033.600S

Standard Implant

033.601S

Standard Implant

033.602S

Standard Implant

033.603S

Standard Implant

033.610S

Standard Plus Implant

033.611S

Standard Plus Implant

033.612S

Standard Plus Implant

033.613S

Standard Plus Implant

033.622S

Tapered Effect Implant

033.623S

Tapered Effect Implant

033.624S

Tapered Effect Implant

033.761G

Tapered Effect Implant

033.762G

Tapered Effect Implant

033.763G

Tapered Effect Implant

034.001

Surgical cassette

034.005

Connector

034.006

Stop key

034.010

Mucosa punch

034.011

Mucosa punch

034.012

Mucosa punch

034.050V4

Sleeve

034.052V4

Sleeve

034.053V4

T-sleeve

034.055V4

T-sleeve

034.056-04

Closing lid

034.057

Sleeve positioner

034.058-04

Closing lid

034.059

Sleeve positioner

034.060

Stepped drill

034.061

Stepped drill

034.066

gonyXâ&#x201E;˘ drill set

034.123

Pilot drill

034.126

Pilot drill

034.129

Pilot drill

034.150

Drill handle

034.215

Milling cutter

228

Page

NUMERICAL INDEX

Ar t. No.

Ar ticle

034.223

Twist drill PRO

Page 68

034.226

Twist drill PRO

034.229

Twist drill PRO

034.235

SP Profile drill

034.237

TE Profile drill

034.245

S/SP Tap

034.250

Drill handle

034.255

Template fixation pin

034.256

Template fixation pin

034.415

Milling cutter

034.423

Twist drill PRO

034.426

Twist drill PRO

034.429

Twist drill PRO

034.435

SP Profile drill

034.437

TE Profile drill

034.445

S/SP Tap

034.450

Drill handle

034.455

Template fixation pin

034.615

Milling cutter

034.623

Twist drill PRO

034.626

Twist drill PRO

034.629

Twist drill PRO

034.645

S/SP Tap

034.650

Drill handle

034.655

Template fixation pin

034.750

C-handle H2

034.751

C-handle H4

034.752

C-handle H6

040.165

Straumann® Surgical cassette

040.175

Ultrasonic cleaning cassette

040.185

Prosthetic cassette

040.195

Bar set gold

120

040.196

Bar set titanium

122

040.197

Bar set plastic

123

040.330

Surgical instruments starter set, Ø 4.1 mm, Tap for adapter, for preparation using the handpiece,

040.331

Surgical instruments starter set, Ø 4.8 mm, Tap for adapter, for preparation using the handpiece

040.360

Screwdriver

040.400S

Drill set

040.401S

Drill set

040.403S

Drill set

040.404S

Drill set

040.406S

Drill set

040.407S

Drill set

040.440S

Drill set

040.441S

Drill set

040.443S

Drill set

040.444S

Drill set

040.446S

Drill set

040.447S

Drill set

040.454S

Refill package: Drill stop set

040.455S

Refill package: Drill stop set

040.456S

Refill package: Drill stop set

040.457S

Refill package: Drill stop set

040.460

Drill stop kit

040.461

Drill stop aid

040.500

Osteotome instrument kit

040.501

Osteotome instrument kit

040.550

Cassette for bone condensation osteotomes,

040.560

Cassette for sinus floor elevation osteotomes,

040.740

RN Solid All-in-One Set

114

040.741

RN Solid All-in-One Set

114

040.742

RN Solid All-in-One Set

114

040.745

WN Solid All-in-One Set

117

040.746

WN Solid All-in-One Set

117

040.840

RN Solid All-in-One Set

114

040.841

RN Solid All-in-One Set

114

040.842

RN Solid All-in-One Set

114

229

INDEX NUMERICAL INDEX

NUMERICAL INDEX

Ar t. No.

Ar ticle

040.845

WN Solid All-in-One Set

Page 117

040.846

WN Solid All-in-One Set

117

040.919C

Classic Set, type C, E, F, H and K

207

040.920C

Classic Set, TPS implant type

208

040.921C

Classic Set, 8Â° type

040.922C

Classic Set, Octa type

209 210, 212

INDEX NUMERICAL INDEX

041.022

Prosthetic cassette

041.032

StraumannÂŽ Bone Block Fixation

041.047

Screw container

041.211

Tray

041.412

Calibration cup

041.440

Dish

041.500

Storage system

041.501

Storage system

041.612

Divider

041.615

Divider

042.700V5

Crosshead mini-screw

042.701V5

Crosshead mini-screw

042.702V5

Crosshead mini-screw

042.703V5

Crosshead mini-screw

043.051S

Standard Plus Implant

043.052S

Standard Plus Implant

043.053S

Standard Plus Implant

043.054S

Standard Plus Implant

043.061S

Standard Implant

043.062S

Standard Implant

043.063S

Standard Implant

043.064S

Standard Implant

043.065S

Standard Implant

043.066S

Standard Plus Implant

043.067S

Standard Plus Implant

043.068S

Standard Plus Implant

043.069S

Standard Plus Implant

043.070S

Standard Plus Implant

043.151S

Standard Plus Implant

043.152S

Standard Plus Implant

043.153S

Standard Plus Implant

043.154S

Standard Plus Implant

043.155S

Standard Implant

043.156S

Standard Implant

043.157S

Standard Implant

043.158S

Standard Implant

043.159S

Standard Implant

043.160S

Standard Implant

043.161S

Standard Plus Implant

043.162S

Standard Plus Implant

043.163S

Standard Plus Implant

043.164S

Standard Plus Implant

043.165S

Standard Plus Implant

043.166S

Tapered Effect Implant

043.167S

Tapered Effect Implant

043.168S

Tapered Effect Implant

043.169S

Tapered Effect Implant

043.251S

Standard Plus Implant

043.252S

Standard Plus Implant

043.253S

Standard Plus Implant

043.254S

Standard Plus Implant

043.255S

Standard Implant

043.256S

Standard Implant

043.257S

Standard Implant

043.258S

Standard Implant

043.259S

Standard Implant

043.260S

Standard Plus Implant

043.261S

Standard Plus Implant

043.262S

Standard Plus Implant

043.263S

Standard Plus Implant

043.264S

Tapered Effect Implant

230

NUMERICAL INDEX

Ar t. No.

Ar ticle

043.265S

Tapered Effect Implant

Page 32

043.266S

Tapered Effect Implant

043.267S

Tapered Effect Implant

043.416S

Standard Plus Implant

043.417S

Standard Plus Implant

043.418S

Standard Plus Implant

043.419S

Standard Plus Implant

043.606S

Standard Implant

043.607S

Standard Implant

043.608S

Standard Implant

043.609S

Standard Implant

043.651S

Standard Plus Implant

043.652S

Standard Plus Implant

043.653S

Standard Plus Implant

043.655S

Standard Plus Implant

043.656S

Standard Plus Implant

043.657S

Standard Plus Implant

043.658S

Standard Plus Implant

043.660S

Tapered Effect Implant

043.661S

Tapered Effect Implant

043.662S

Tapered Effect Implant

044.003

Round bur

044.004

Round bur

044.022

Round bur

044.084

SP Profile drill

044.085

SP Profile drill

044.086

SP Profile drill

044.087

SP Profile drill

044.088

SP Profile drill

044.089

SP Profile drill

044.125

Glide hole drill

044.126

Residual ridge drill

044.210

Pilot drill 1

044.211

Pilot drill 1

044.214

Pilot drill 2

044.215

Pilot drill 2

044.250

Twist drill PRO

044.251

Twist drill PRO

044.254

Twist drill PRO

044.255

Twist drill PRO

044.304

RN Bone profiler

044.305

WN Bone profiler

044.330

Explantation drill

044.331

Explantation drill

044.332

Explantation drill

044.340

Explantation drill

044.341

Explantation drill

044.342

Explantation drill

044.344

Explantation drill

044.345

Explantation drill

044.346

Explantation drill

044.570

Tap

044.575

S/SP Tap

044.577

S/SP Tap

044.579

S/SP Tap

044.701

TE Profile drill

044.703

TE Profile drill

044.705

TE Profile drill

044.708

TE Profile drill

044.710

TE Profile drill

044.712

TE Profile drill

045.025

CD20 SFI-Anchor® Abutment, Div. 20°

045.026

RN SFI-Anchor® Abutment, Div. 60°

134

045.027

RN SFI-Anchor® Abutment, Div. 60°

134

045.028

RN SFI-Anchor® Abutment, Div. 60°

134

045.029

RN SFI-Anchor® Abutment, Div. 60°

134

045.030

RN SFI-Anchor® Abutment, Div. 60°

134

63 101

231

INDEX NUMERICAL INDEX

134, 198

NUMERICAL INDEX

Ar t. No.

Ar ticle

045.031

RN SFI-Anchor® Abutment, Div. 20°

Page 134

045.032

RN SFI-Anchor® Abutment, Div. 20°

134

045.033

RN SFI-Anchor® Abutment, Div. 20°

134

045.034

RN SFI-Anchor® Abutment, Div. 20°

134

045.035

RN SFI-Anchor® Abutment, Div. 20°

134

045.036

RC SFI-Anchor® Abutment, Div. 60°

198

045.037

RC SFI-Anchor® Abutment, Div. 60°

198

045.038

RC SFI-Anchor® Abutment, Div. 60°

198

045.039

RC SFI-Anchor® Abutment, Div. 60°

198

045.040

RC SFI-Anchor® Abutment, Div. 60°

198

045.041

RC SFI-Anchor® Abutment, Div. 20°

198

045.042

RC SFI-Anchor® Abutment, Div. 20°

198

045.043

RC SFI-Anchor® Abutment, Div. 20°

198

045.044

RC SFI-Anchor® Abutment, Div. 20°

198

045.045

RC SFI-Anchor® Abutment, Div. 20°

045.046V2

SFI-Anchor® Basic set

134, 198

045.047V4

SFI-Anchor® Retention insert, extra-low

134, 198

045.048V4

SFI-Anchor® Retention insert, low

134, 198

045.049V4

SFI-Anchor® Retention insert, medium

134, 198

045.050V4

SFI-Anchor® Retention insert, strong

135, 199

045.051

SFI-Anchor® Retention insert, Elitor®

135, 199

045.052V4

SFI-Anchor® Spacer

135, 199

045.053V4

SFI-Anchor® Block-out spacer

135, 199

045.054V4

SFI-Anchor® Impression part

135, 199

045.055V4

SFI-Anchor® Analog

135, 199

045.056

RN SFI-Anchor® Abutment planner

135, 199

045.057

SFI-Anchor® Aligner

135, 199

045.058

SFI-Anchor® Tool

135, 199

045.059

SFI-Anchor® Screwdriver

135, 199

045.060

SFI-Anchor® Instrument set

135, 199

045.061V4

SFI-Anchor® Housing

135, 199

045.062

RC SFI-Anchor® Abutment planner

045.111V4

Cleaning brush

198

135, 199 57, 73, 78

045.921

Light curette for implants

046.045C

Driver for Octa abutment

046.049

Torque control device

046.057

Tweezers

046.064

Holding key

046.067

Solid abutment driver

77, 114

046.068

Solid abutment driver

77, 114

046.069

Retentive anchor driver

77, 125

046.085

Screwdriver handle

046.095

Tweezers

046.108

Service instrument

046.110

Instrument tweezers

046.114C

Cross-tip screwdriver

046.119

Ratchet

046.147

Diagnostic T

046.148

Implant distance indicator for Standard, Standard Plus and Tapered Effect

046.150

Activator set

121, 190, 201

046.151

Deactivator

121, 190, 201

046.152

Deactivator

121, 190, 201

046.154

Screwdriver

046.237

NNC Reamer

046.239

Analog holder

046.240

Handle

INDEX NUMERICAL INDEX

046.241

synOcta® Guide pin

046.242

Guide pin

046.243

Reamer

046.244

Guide pin

046.245

Polishing protector

046.246

Guide pin

232

58 213 57, 73, 78 57, 73 57, 73

77 57, 73 57, 73, 78 57, 73 213 57, 73, 78 47 47

125 78, 113 78, 88, 101, 105, 119, 124, 168, 169,

89, 91, 95, 98, 106, 113, 116, 153, 155, 162, 171, 178, 184, 193, 204

78, 95, 98, 101, 105, 106, 113, 116, 119 78, 95, 105 116 78, 95, 98, 105, 106, 116, 119 119 95, 124 78, 98

NUMERICAL INDEX

Ar t. No.

Ar ticle

046.247

synOcta® Guide pin

78, 106

Page 78, 113

046.249

NNC Guide pin

046.256

Screwdriver blade

046.257

Screw-holding device

046.258

Screwdriver handle

046.400

SCS Screwdriver

58, 77

046.401

SCS Screwdriver

58, 77

046.402

SCS Screwdriver

58, 77

046.410

SCS Screwdriver

58, 77

046.411

SCS Screwdriver

58, 77

046.412

SCS Screwdriver

046.413V4

LOCATOR® Abutment holder sleeve

046.415

LOCATOR® Core tool

77, 129, 133, 139, 188, 197

046.416

LOCATOR® Screwdriver

77, 129, 133, 139, 188, 197

046.417

LOCATOR® Screwdriver

77, 129, 133, 139, 188, 197

046.420

TS Hexagonal screwdriver

046.421

Hexagonal screwdriver

046.450

Depth gauge

046.451

Depth gauge

046.455

Depth gauge

046.458

Alignment pin

046.460

Adapter

57, 73

046.461

Adapter

57, 73

046.462

Adapter

57, 73

046.470

Adapter

57, 73

046.471

Adapter

57, 73

046.472

Adapter

57, 73

046.500

Osteotome

046.501

Osteotome

046.502

Osteotome

046.503

Osteotome

046.510

Osteotome

046.511

Osteotome

046.512

Osteotome

046.513

Osteotome

046.521

Osteotome

046.522

Osteotome

046.523

Osteotome

046.531

Osteotome

046.532

Osteotome

046.533

Osteotome

046.550

Depth stop

046.551

Depth stop

60, 62

046.552

Depth stop

61, 62

046.553

Depth stop

61, 62

048.000V4

Transfer aid

048.002V4

Transfer aid

048.003V4

Transfer aid

101

RN synOcta® Impression post

048.013

WN Impression cap

58, 77 129, 133, 139, 188, 197

101

93 103, 117

048.017V4

RN Impression cap

048.028S

Sterile RN Healing cap

20, 21, 23, 26, 28, 30, 32, 34

93, 115

048.029S

Sterile RN Healing cap

20, 21, 23, 26, 28, 30, 32, 34

048.030S

Sterile WN Healing cap

048.032

Transfer aid

048.033S

Sterile RN Healing cap

20, 22, 23, 26, 27, 29, 32, 33

048.034S

Sterile RN Healing cap

20, 22, 23, 26, 27, 29, 32, 33

048.037S

Sterile RN Healing cap

20, 22, 23, 26, 28, 30, 32, 34

048.038S

Sterile WN Healing cap

24, 31, 35

048.039S

Sterile WN Healing cap

24, 31, 35

24, 31, 35 107

233

INDEX NUMERICAL INDEX

048.010

NUMERICAL INDEX

Ar t. No.

Ar ticle

048.047V4

RN Protective cap

Page 115

048.048V4

RN Protective cap

115

048.049V4

RN Protective cap

115

048.051

WN Protective cap

118

048.052

WN Protective cap

048.053S

Sterile WN Healing cap

048.054V4

Transfer aid

048.059V4

Transfer aid

048.060V4

Positioning cylinder

115

048.061V4

Positioning cylinder

115

048.062V4

Positioning cylinder

115

048.065

Positioning cylinder

117

048.066

Positioning cylinder

117

048.068

RN Straumann® Scanbody

048.069

WN Straumann® Scanbody

048.070V4

RN synOcta® Positioning cylinder

048.071S

Sterile NNC Healing cap

048.073V4

Fixation pin

048.074S

Sterile NNC Healing cap

048.082S

Sterile NNC Healing cap

048.085V4

RN Scanbody

048.086V4

WN Scanbody

048.088

RN Wax-up sleeve

048.089

WN Wax-up sleeve

048.090

RN synOcta® Impression post

048.091

WN synOcta® impression cap

103

118 24, 31, 35 106 98

25 124

048.093V4

RN synOcta® Impression cap

124

048.095

WN synOcta® positioning cylinder

103

048.108

RN synOcta® Analog

048.109

Transfer pin

124 46, 125

048.117V4

Shoulder analog

048.124

RN synOcta® analog

115 93

048.127

NNC Implant analog

048.128

NNC Impression post

048.129

RN Repositionable implant analog

88 85, 93

048.134

NNC Impression post

048.140

Shoulder analog

117

048.155

NNC Solid abutment driver

110

048.156

NNC Solid abutment driver

110

048.160

Analog

115

048.161

Analog

115

048.162

Analog

115

048.165

Analog

117

048.166

Analog

048.168

CARES® RN Mono Scanbody

85, 102

048.169

CARES® WN Mono Scanbody

86, 109

048.171

WN synOcta® analog

048.172

WN Repositionable implant analog

117

103 86, 103

INDEX NUMERICAL INDEX

048.173

CARES® NNC Mono Scanbody

048.175

RN LOCATOR® Abutment

130

048.176

RN LOCATOR® Abutment

130

048.177

RN LOCATOR® Abutment

130

048.178

RN LOCATOR® Abutment

130

048.179

RN LOCATOR® Abutment

130

048.180

RN LOCATOR® Abutment

048.181V4

LOCATOR® Replacement male

128, 132, 138, 187, 196

048.182V2

LOCATOR® Male processing package

128, 132, 138, 187, 196

048.183

WN LOCATOR® Abutment

136

048.184

WN LOCATOR® Abutment

136

048.185

WN LOCATOR® Abutment

136

048.186

WN LOCATOR® Abutment

136

048.187

WN LOCATOR® Abutment

048.188V4

LOCATOR® Replacement male

128, 132, 138, 187, 196

048.189V2

LOCATOR® Male processing package

127, 131, 137, 186, 195

048.190V4

LOCATOR® Replacement male

127, 131, 137, 186, 195

048.191V4

LOCATOR® Replacement male

127, 131, 137, 186, 195

048.192V4

LOCATOR® Replacement male

127, 131, 137, 186, 195

234

130

136

NUMERICAL INDEX

Ar t. No.

Ar ticle

048.193V4

LOCATOR® Replacement male

128, 132, 138, 187, 196

Page

048.194V4

LOCATOR® Replacement male

128, 132, 138, 187, 196

048.195V4

LOCATOR®

129, 133, 139, 188, 197

048.196V20

LOCATOR® Block-out spacer

129, 133, 139, 188, 197

048.197V4

LOCATOR® Impression coping

129, 133, 139, 188, 197

048.198V4

LOCATOR® Female analog

048.199V4

LOCATOR® Parallel post

129, 133, 139, 188, 197

048.200

LOCATOR® Angle measurement guide

129, 133, 139, 188, 197

048.204

RN synOcta® Gold coping

120

048.208V4

Stabilization pin for retaining gold copings in solder investment

121

048.214

RN synOcta® Titanium coping

122

048.218V4

LOCATOR® Processing spacer

129, 133, 139, 188, 197

129, 133, 139

048.220C

Plastic coping for abutment 8°

048.227

RN synOcta® Plastic coping

213

048.229

RN synOcta® Plastic coping

048.232C

TS gold coping for Octa

048.240

RN synOcta® Milling cylinder

048.241

RN synOcta® Milling cylinder

048.242

WN Temporary Abutment VITA CAD-Temp®

118

048.243

WN synOcta® Plastic coping

106

048.244

WN synOcta® Plastic coping

106

048.245

Plastic coping

116

048.246

Plastic coping

116

048.247

Plastic coping

119

048.248

Plastic coping

119

048.256

NNC Plastic coping

048.257

NNC Plastic coping

048.258

NNC Plastic coping

048.263

NNC Plastic coping

113

048.264

NNC Plastic coping

113

048.267

NNC Burn-out coping

048.268

RN Burn-out coping

102 109

95, 123 95 213 97 97

048.269

WN Burn-out coping

048.275V4

RN PLAN LOCATOR® Abutment

048.276V4

RN PLAN LOCATOR® Abutment

048.277V4

RN PLAN LOCATOR® Abutment

048.278V4

RN PLAN LOCATOR® Abutment

048.279V4

RN PLAN LOCATOR® Abutment

048.280V4

RN PLAN LOCATOR® Abutment

048.283V4

WN PLAN LOCATOR® Abutment

048.284V4

WN PLAN LOCATOR® Abutment

048.285V4

WN PLAN LOCATOR® Abutment

048.286V4

WN PLAN LOCATOR® Abutment

048.287V4

WN PLAN LOCATOR® Abutment

048.304C

Occlusal screw

82 213

048.312C

TPS occlusal screw

213

048.313

NNC Basal screw

88, 91, 92

048.314

NNC Basal screw

88, 89

048.324S

Sterile NNC Closure cap

048.325S

Sterile NNC Closure screw

048.350

SCS Occlusal screw

25 25 61, 62, 65, 95, 96, 99, 104, 120, 122, 123, 140

048.354

RN Occlusal screw

048.356

synOcta® Basal screw

048.360V4

SCS Guide screw

048.361V4

SCS Guide screw

140

048.362V4

SCS Guide screw

97, 140

048.363V4

SCS Guide screw

97, 140

048.364V4

SCS Guide screw

140

85, 86, 94, 96, 102, 109 140

235

INDEX NUMERICAL INDEX

Black processing male

NUMERICAL INDEX

Ar t. No.

Ar ticle

048.365V4

SCS Guide screw

Page

048.366V4

SCS Guide screw

048.371S

Sterile RN Closure cap

20, 21, 23, 26, 27, 29, 32, 33

048.373S

Sterile RN Closure cap

20, 21, 23, 26, 27, 29, 32, 33

048.375S

Sterile WN Closure cap

048.404C

Octa abutment

048.411

Dolder® bar

120, 190, 201

048.412

Dolder® bar

120, 190, 201

048.413

Dolder® bar matrix

120, 190, 201

048.414

Dolder® bar matrix

120, 190, 201

048.424C

Pin abutment

213

048.439

Retentive anchor abutment

125

048.448C

TS post for Octa

213

048.450

Titanium matrix

125

048.451V4

Spacer

125

048.452

Screwdriver

125

048.453

Extractor

125

048.454V4

Threaded mounting ring

125

048.455V4

Spring

125

048.456

Elliptical matrix

125

048.457

Spare lamella retention insert

048.460

Plastic bar

123, 192, 203

048.461

Plastic bar

123, 192, 203

048.465

Titanium bar

122, 192, 203

048.466

Titanium bar

048.470

Titanium bar matrix

122, 123, 192, 203

048.471

Titanium bar matrix

122, 123, 192, 203

048.483C

Abutment, angled 15º

210, 211

048.484C

Abutment, angled 20º

210, 211

048.501

NNC Post

048.502

NNC Post

048.527

NNC Analog

111

048.528

NNC Analog

111

048.529

NNC Analog

111

048.540

RN Solid abutment 6°

114

048.541

RN Solid abutment 6°

114

048.542

RN Solid abutment 6°

114

048.545

WN Solid abutment 6°

117

048.546

WN Solid abutment 6°

117

048.547

NNC Solid abutment

110

048.548

NNC Solid abutment

110

048.549

NNC Solid abutment

110

048.571

RN synOcta® Meso milling cylinder

048.573

WN synOcta® Meso milling cylinder

104

140 140

24, 31, 35 210

125

122, 192, 203

88 88

INDEX NUMERICAL INDEX

048.579

NNC Impression cap

111

048.581

NNC LOCATOR® Abutment

126

048.582

NNC LOCATOR® Abutment

126

048.583

NNC LOCATOR® Abutment

126

048.584

NNC LOCATOR® Abutment

126

048.585

NNC LOCATOR® Abutment

126

048.586

NNC LOCATOR® Abutment

126

048.587

NNC Positioning cylinder

111

048.588

NNC Positioning cylinder

111

048.589

NNC Positioning cylinder

111

048.592

NNC Gold abutment

048.593

NNC Gold abutment

048.598

NNC Cementable abutment

048.601

RN synOcta® 1.5 screw-retained abutment

048.603

WN synOcta® 1.5 screw-retained abutment

048.605

RN synOcta® Cementable abutment

048.606

WN synOcta® cementable abutment

106

048.608

WN synOcta® 15° angled abutment

107

048.609

WN synOcta® 15° angled abutment

107

048.610

RN synOcta® 15° angled abutment

048.611

RN synOcta® 15° angled abutment

236

89 95, 97, 120, 122 104 98

NUMERICAL INDEX

Ar t. No.

Ar ticle

048.612

RN synOcta® 15° angled abutment

Page 99

048.613

RN synOcta® 15° angled abutment

048.615

RN synOcta® 20° angled abutment

048.616

RN synOcta® 20° angled abutment

048.617

RN synOcta® 20° angled abutment

048.618

RN synOcta® 20° angled abutment

048.620

RN synOcta® Transversal (TS) screw-retained abutment

048.621

NNC Cementable abutment

048.622

NNC Cementable abutment

048.632

RN synOcta® Gold coping

048.633

RN synOcta® Gold coping

048.634

RN synOcta® TS gold coping

101

048.638

WN synOcta® Gold coping

104

048.639

WN synOcta® Gold coping

104

048.642

RN synOcta® Gold abutment

048.644

WN synOcta® Gold abutment

104

048.654

RN Temporary coping

115

048.655

RN Temporary coping

115

048.656

WN Temporary coping

118

048.657

WN Temporary coping

118

048.658

NNC Temporary coping

112

048.659

NNC Temporary coping

112

048.662

RN synOcta® Plastic coping

048.663

RN synOcta® Plastic coping

048.664

RN Temporary Abutment VITA CAD-Temp®

048.665

RN synOcta® TS plastic coping

101

048.666

WN synOcta® Plastic coping

104

048.667

WN synOcta® Plastic coping

104

048.668

RN synOcta® Temporary Meso abutment

048.670

Extension shell

048.672

RN synOcta® TS thread protection screw

048.676V4

Plastic shoulder

048.678

Plastic shoulder

107

048.699

NNC Temporary Abutment VITA CAD-Temp®

048.700

NNC Protective cap

112

048.701

NNC Protective cap

112

048.702

NNC Protective cap

112

048.709

NNC Variobase™ Abutment

048.710

RN Variobase™ Abutment

102 109

99 101

94 99 101

048.711

WN Variobase™ Abutment

048.715

RN synOcta® Post

048.716

RN synOcta® Post

048.717

WN synOcta® Post

103

048.718

WN synOcta® Post

103

048.901

Prosthetic planning kit

048.904

Soft Tissue Level PLAN Set

048.905

Soft Tissue Level PLAN Cassette

048.916V4

RN synOcta® 15° angled PLAN abutment

048.917V4

RN synOcta® 15° angled PLAN abutment

048.918V4

RN synOcta® 20° angled PLAN abutment

048.919V4

RN synOcta® 20° angled PLAN abutment

048.921V4

RN synOcta® Transversal PLAN abutment

048.922V4

RN synOcta® 15° angled PLAN abutment

048.923V4

RN synOcta® 15° angled PLAN abutment

048.924V4

RN synOcta® 20° angled PLAN abutment

048.925V4

RN synOcta® 20° angled PLAN abutment

048.926V4

RN PLAN Solid abutment

048.927V4

RN PLAN Solid abutment

048.928V4

RN PLAN Solid abutment

048.929V4

RN synOcta® 1.5 screw-retained PLAN abutment

048.930V4

RN synOcta® Cementable PLAN abutment

048.931V4

WN synOcta® 1.5 screw-retained PLAN abutment

048.932V4

WN synOcta® Cementable PLAN abutment

048.933V4

WN synOcta® 15° angled PLAN abutment

048.934V4

WN synOcta® 15° angled PLAN abutment

048.938V4

WN PLAN Solid abutment 6°

048.939V4

WN PLAN Solid abutment 6°

237

INDEX NUMERICAL INDEX

NUMERICAL INDEX

Ar t. No.

Ar ticle

048.940V4

Bite registration aid

93, 103

048.941V4

Bite registration aid

93, 103

048.943V4

NNC PLAN Cementable abutment, straight,

048.944V4

NNC PLAN Cementable abutment, angled 15°,

048.945V4

NNC PLAN Cementable abutment, angled 15°,

048.946V4

NNC PLAN Locator® Abutment

048.947V4

NNC PLAN Locator® Abutment

048.948V4

NNC PLAN Locator® Abutment

048.949V4

NNC PLAN Locator® Abutment

048.950V4

NNC PLAN Locator® Abutment

048.951V4

NNC PLAN Locator® Abutment

048.952V4

NNC PLAN Solid abutment

048.953V4

NNC PLAN Solid abutment

048.954V4

NNC PLAN Solid abutment

048.960V4

NNC Bite registration aid

048.961V4

NNC Bite registration aid

049.071

RN Guiding sleeve

049.076V4

X-ray reference sphere

049.082

Guide cylinder

049.083

Guide cylinder

049.154

Transversal screw

Page

47 52, 64 64 101

049.167

Guide cylinder

049.181

SCS Occlusal screw

049.182

SCS Guiding cylinder

049.360

SCS Guiding cylinder

049.361

48h Explantation device

049.810V4

Drill sleeve with collar

049.816V4

049.817V4

049.818V4

Stepped pin

049.819V4

049.850

RN Guiding sleeve

049.851

RN Guiding sleeve

070.005

Straumann® TiBrush™

070.203

Straumann® BoneCeramic™ 400–700

070.204

Straumann® BoneCeramic™ 500–1000

070.205

Straumann® BoneCeramic™ 500–1000

075.098

Straumann® Emdogain® 0.15 ml

075.101

Straumann® Emdogain® 0.3 ml

075.102

Straumann® Emdogain® 0.7 ml

075.114

Straumann® Emdogain® 0.3 ml Multipack

075.116

Straumann® Emdogain® 0.7 ml Multipack

075.117

Straumann® Emdogain® PLUS

075.203

Straumann® PrefGel® 0.6 ml

120.0033

Straumann® Bone Level Implant

216

140.024

synOcta® system

216

140.032

Lower jaw

217

140.033

Upper jaw

217

140.049

Lower jaw

217

140.055

Plexiglass cassette/Membranette

140.062

Straumann® Tapered Effect Implant

216

65, 94, 103

INDEX NUMERICAL INDEX

140.120

Illustration model: Straumann® Standard Implant

216

140.122

Straumann® Standard Plus NNC Implant

216

150.215

X-ray templates

150.216

X-ray templates

150.230

X-ray templates

80087

48h Explantation device

80103

48h Explantation device

80356

TempImplant bending tool

80363

TempImplant inserting device

80371SV4

TempImplant

80372SV4

TempImplant

80381

Drill

80398

TempImplant inserting device

80399V4

Dalbo®-Rotex® Matrix

238

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

48h Explantation device

026.4048

Ø 8 mm/Length 31.2 mm

Stainless steel

Page 65

48h Explantation device

049.361

Ø 8 mm/Length 31.4 mm

Stainless steel

48h Explantation device

80087

Ø 8 mm/Length 26.6 mm

Stainless steel

48h Explantation device

80103

Ø 8 mm/Length 20.6 mm

Stainless steel

48h Explantation device

026.2048

Ø 8 mm/Length 31.4 mm

Stainless steel

Abutment, angled 15º

048.483C

Abutment, angled 20º

048.484C

Activator set

046.150

Length 50 mm

Stainless steel

121, 190, 201

Adapter

046.460

Length 11 mm

Stainless steel

57, 73

Adapter

046.461

Length 18 mm

Stainless steel

57, 73

Adapter

046.462

Length 28 mm

Stainless steel

57, 73

Adapter

046.470

Length 19 mm

Stainless steel

57, 73

Adapter

046.471

Length 26 mm

Stainless steel

57, 73

Adapter

046.472

Length 34 mm

Stainless steel

57, 73

Alignment pin

046.458

Length 28 mm/Ø 2.2 mm

Analog

048.160

Length 14.3 mm

115

Analog

048.161

Length 15.8 mm

115

Analog

048.162

Length 17.3 mm

115

Analog

048.165

Length 16 mm

117

Analog

048.166

Length 17.5 mm

Analog holder

046.239

Length 105 mm

Al/Steel

Bar set gold

040.195

120

Bar set plastic

040.197

123

Bar set titanium

040.196

Bite registration aid

048.941V4

Bite registration aid BL Profile drill

210, 211

117 78, 88, 89, 91, 95, 98, 101, 105, 106, 113, 116, 119, 124, 153, 155, 162, 168, 169, 171, 178, 184, 193, 204

POM

93, 103

048.940V4

Height 8 mm/Ø 5 mm

POM

93, 103

026.4303

Length 26 mm/Ø 4.1 mm

Stainless steel

BL Profile drill

026.4306

Length 35 mm/Ø 4.1 mm

Stainless steel

BL Profile drill

026.6306

Length 35 mm/Ø 4.8 mm

Stainless steel

BL Profile drill

026.6303

Length 26 mm/Ø 4.8 mm

Stainless steel

BL Profile drill

026.4503

Length 37 mm/Ø 4.1 mm

Stainless steel

BL Profile drill

026.6503

Length 37 mm/Ø 4.8 mm

Stainless steel

BL/NNC Profile drill

026.2303

Length 26 mm/Ø 3.3 mm

Stainless steel

BL/NNC Profile drill

026.2306

Length 35 mm/Ø 3.3 mm

Stainless steel

BL/NNC Profile drill

026.2503

Length 37 mm/Ø 3.3 mm

Stainless steel

BL/TE Tap

026.4310

Length 23 mm/Ø 4.1 mm

Stainless steel/PEEK

BL/TE Tap

026.6310

Length 23 mm/Ø 4.8 mm

Stainless steel/PEEK

BL/TE Tap

026.4510

Length 42 mm/Ø 4.1 mm

Stainless steel

BL/TE Tap

026.6510

Length 42 mm/Ø 4.8 mm

Stainless steel

BL/TE/NNC Tap

026.2310

Length 23 mm/Ø 3.3 mm

Stainless steel/PEEK

BL/TE/NNC Tap

026.2510

Length 42 mm/Ø 3.3 mm

Stainless steel

Bone Level Implant

021.2510

SLA® 10 mm

Roxolid®

Bone Level Implant

021.2210G

SLActive® 10 mm

Roxolid®

Bone Level Implant

021.2212G

SLActive® 12 mm

Roxolid®

Bone Level Implant

021.2310

SLActive® 10 mm

Roxolid®

Bone Level Implant

021.2312

SLActive® 12 mm

Roxolid®

Bone Level Implant

021.2314

SLActive® 14 mm

Roxolid®

Bone Level Implant

021.2512

SLA® 12 mm

Roxolid®

Bone Level Implant

021.2514

SLA® 14 mm

Roxolid®

Bone Level Implant

021.2410

SLA® 10 mm

Bone Level Implant

021.2412

SLA® 12 mm

Bone Level Implant

021.2414

SLA® 14 mm

Bone Level Implant

021.2208G

SLActive® 8 mm

Roxolid®

Bone Level Implant

021.2308

SLActive® 8 mm

Roxolid®

Bone Level Implant

021.2508

SLA® 8 mm

Roxolid®

Bone Level Implant

021.2408

SLA® 8 mm

Bone Level Implant

021.4310

SLActive® 10 mm

Roxolid®

Bone Level Implant

021.4312

SLActive® 12 mm

Roxolid®

Bone Level Implant

021.4314

SLActive® 14 mm

Roxolid®

Bone Level Implant

021.4510

SLA® 10 mm

Roxolid®

Bone Level Implant

021.4512

SLA® 12 mm

Roxolid®

Bone Level Implant

021.4514

SLA® 14 mm

Roxolid®

Bone Level Implant

021.4410

SLA® 10 mm

Bone Level Implant

021.4412

SLA® 12 mm

Bone Level Implant

021.4414

SLA® 14 mm

239

INDEX ALPHABETICAL INDEX

122 Height 12 mm/Ø 5 mm

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

Bone Level Implant

021.4110G

SLActive® 10 mm

Bone Level Implant

021.4112G

SLActive® 12 mm

Bone Level Implant

021.4308

SLActive® 8 mm

Roxolid®

Bone Level Implant

021.4508

SLA® 8 mm

Roxolid®

Bone Level Implant

021.4408

SLA® 8 mm

Bone Level Implant

021.4108G

SLActive® 8 mm

Bone Level Implant

021.6310

SLActive® 10 mm

Roxolid®

Bone Level Implant

021.6312

SLActive® 12 mm

Roxolid®

Bone Level Implant

021.6314

SLActive® 14 mm

Roxolid®

Bone Level Implant

021.6510

SLA® 10 mm

Roxolid®

Bone Level Implant

021.6512

SLA® 12 mm

Roxolid®

Bone Level Implant

021.6514

SLA® 14 mm

Roxolid®

Bone Level Implant

021.6410

SLA® 10 mm

Bone Level Implant

021.6412

SLA® 12 mm

Bone Level Implant

021.6414

SLA® 14 mm

Bone Level Implant

021.6110G

SLActive® 10 mm

Bone Level Implant

021.6112G

SLActive® 12 mm

Bone Level Implant

021.6308

SLActive® 8 mm

Roxolid®

Bone Level Implant

021.6508

SLA® 8 mm

Roxolid®

Bone Level Implant

021.6408

SLA® 8 mm

Bone Level Implant

021.6108G

SLActive® 8 mm

Bone Level Implant distance indicator

026.0901

Length 100 mm

Ti/Stainless steel

Bone Level PLAN cassette

026.0102

Length 278 mm/Width 124 mm/ Height 33 mm

141

Bone Level PLAN set

026.0101

Length 278 mm/Width 124 mm/ Height 33 mm

PC/POM

141

C-handle H2

034.750

Stop 6 mm/Length 89 mm

Stainless steel

C-handle H4

034.751

Stop 4 mm/Length 89 mm

Stainless steel

C-handle H6

034.752

Stop 2 mm/Length 89 mm

Stainless steel

Calibration cup

041.412

Ø 80 mm

Anodized Al

CARES® Mono Scanbody

025.0000

Ø 3.5 mm

PEEK

CARES® Mono Scanbody

025.0001

Ø 4.6 mm

PEEK

CARES® NC Mono Scanbody

025.2915

Ø 3.5 mm/Height 10 mm

PEEK/TAN

CARES® NNC Mono Scanbody

048.173

Ø 3.5 mm/Height 10 mm

PEEK/TAN

CARES® RC Mono Scanbody

025.4915

Ø 4.1 mm/Height 10 mm

PEEK/TAN

151, 172

CARES® RN Mono Scanbody

048.168

Ø 4.8 mm/Height 10 mm

PEEK/TAN

85, 102

CARES® WN Mono Scanbody

048.169

Ø 6.5 mm/Height 10 mm

PEEK/TAN

86, 109

Cassette for bone condensation osteotomes,

040.550

Stainless steel/Plastic

Cassette for sinus floor elevation osteotomes,

040.560

Stainless steel/Plastic

Titanium grade 5

76 166 182 150, 156

INDEX ALPHABETICAL INDEX

CD20 SFI-Anchor® Abutment, Div. 20°

045.025

Classic Set, 8° type

040.921C

Stainless steel/Ti/Al/PEEK/Ceramicor®

Classic Set, Octa type

040.922C

Stainless steel/Ti/Al

Classic Set, TPS implant type

040.920C

Stainless steel/Ti/Al/Elitor®

Classic Set, type C, E, F, H and K

040.919C

Stainless steel/Ti/Al/Ceramicor®

Cleaning brush

045.111V4

Length 100 mm/Ø 4.5 mm

Stainless steel/Nylon

Closed tray impression post

025.2245

Ø 3.5 mm

TAN/POM

165

Closed tray impression post

025.2246

Ø 4.6 mm

TAN/POM

181

Closing lid

034.058-04

Ø 5 mm

PEEK

Closing lid

034.056-04

Ø 2.8 mm

PEEK

Connector

034.005

Length 14 mm

Stainless steel

Cross-tip screwdriver

046.114C

Stainless steel

213

Crosshead mini-screw

042.700V5

Length 8 mm/Ø 1.5 mm

Crosshead mini-screw

042.701V5

Length 10 mm/Ø 1.5 mm

Crosshead mini-screw

042.702V5

Length 12 mm/Ø 1.5 mm

Crosshead mini-screw

042.703V5

Length 14 mm/Ø 1.5 mm

Dalbo ® -Rotex ® Matrix

80399V4

Deactivator

046.151

Length 66 mm

Grilon BS/Brass

121, 190, 201

Deactivator

046.152

Length 66 mm

Grilon BS/Brass

121, 190, 201

Depth gauge

046.450

Length 26 mm/Ø 3.5 mm

Depth gauge

046.451

Length 26 mm/Ø 4.2 mm

Depth gauge

046.455

Length 27 mm/Ø 2.2/2.8 mm

Depth stop

046.550

Ø 2.2 mm

Ti/Stainless steel

Depth stop

046.551

Ø 2.8 mm

Ti/Stainless steel

60, 62

240

Height 2 mm/Ø 5.3 mm

Page

134, 198 209 210, 212 208 207 57, 73, 78

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

Depth stop

046.552

Ø 3.5 mm

Ti/Stainless steel

61, 62

Depth stop

046.553

Ø 4.2 mm

Ti/Stainless steel

61, 62

Diagnostic T

046.147

Length 65 mm/Width 33 mm

Dish

041.440

Length 56 mm/Width 31 mm/Height Anodized Al 11 mm

Divider

041.612

Length 47.5 mm/Width 9.5 mm/ Height 1 mm

Anodized Al

Divider

041.615

Length 27.5 mm/Width 9.5 mm/ Height 1 mm

Anodized Al

Dolder® bar

048.411

Length 25 mm/Height 2.3 mm

Elitor®

120, 190, 201

Dolder® bar

048.412

Length 25 mm/Height 3 mm

Elitor®

120, 190, 201

Dolder® bar matrix

048.413

Length 25 mm/Height 2.75 mm

Elitor®/Brass

120, 190, 201

Dolder® bar matrix

048.414

Length 25 mm/Height 3.5 mm

Elitor®/Brass

120, 190, 201

Drill

80381

Length 37 mm/Ø 1.5 mm

Stainless steel

Drill handle

034.250

Stop 1/3 mm/Ø 2.8 mm/Length 104 mm

Stainless steel

Drill handle

034.450

Stop 1/3 mm/Ø 3.5 mm/Length 104 mm

Stainless steel

Drill handle

034.650

Stop 1/3 mm/Ø 4.2 mm/Length 104 mm

Stainless steel

Drill handle

034.150

Stop 1/3 mm/Ø 2.2 mm/Length 104 mm

Stainless steel

Drill set

040.441S

Ø 2.2 mm/Ø 2.8 mm/Length 41 mm Stainless steel

Drill set

040.443S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Length 33 mm

Stainless steel

Drill set

040.444S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Length 41 mm

Stainless steel

Drill set

040.446S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Ø 4.2 mm/Length 33 mm

Stainless steel

Drill set

040.447S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Ø 4.2 mm/Length 41 mm

Stainless steel

Drill set

040.440S

Ø 2.2 mm/Ø 2.8 mm/Length 33 mm Stainless steel

Drill set

040.401S

Ø 2.2 mm/Ø 2.8 mm/Length 41 mm Stainless steel

Drill set

040.403S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Length 33 mm

Stainless steel

Drill set

040.404S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Length 41 mm

Stainless steel

Drill set

040.406S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Ø 4.2 mm/Length 33 mm

Stainless steel

Drill set

040.407S

Ø 2.2 mm/Ø 2.8 mm/Ø 3.5 mm/ Ø 4.2 mm/Length 41 mm

Stainless steel

Drill set

040.400S

Ø 2.2 mm/Ø 2.8 mm/Length 33 mm Stainless steel

Drill sleeve with collar

049.810V4

Length 10 mm/Inner Ø 2.4 mm/Outer Ti Ø 3.5 mm

Drill stop aid

040.461

Plastic

Drill stop kit

040.460

Plastic

Driver for Octa abutment

046.045C

Stainless steel

213

Elliptical matrix

048.456

Height 3.2 mm/Ø 3.6 mm

Elitor®/Ti

125

Explantation drill

044.331

Length 37.5 mm/Inner Ø 3.6 mm/ Outer Ø 4.2 mm

Stainless steel

Explantation drill

044.332

Length 40.5 mm/Inner Ø 3.6 mm/ Outer Ø 4.2 mm

Stainless steel

Explantation drill

044.340

Length 32 mm/Inner Ø 4.2 mm/Outer Stainless steel Ø 4.8 mm

Explantation drill

044.341

Length 37.5 mm/Inner Ø 4.2 mm/ Outer Ø 4.8 mm

Stainless steel

Explantation drill

044.342

Length 40.5 mm/Inner Ø 4.2 mm/ Outer Ø 4.8 mm

Stainless steel

Explantation drill

044.344

Length 32 mm/Inner Ø 4.9 mm/Outer Stainless steel Ø 5.5 mm

Explantation drill

044.346

Length 40.5 mm/Inner Ø 4.9 mm/ Outer Ø 5.5 mm

Stainless steel

Explantation drill

044.345

Length 37.5 mm/Inner Ø 4.9 mm/ Outer Ø 5.5 mm

Stainless steel

Explantation drill

044.330

Length 32 mm/Inner Ø 3.6 mm/Outer Stainless steel Ø 4.2 mm

Extension shell

048.670

Height 5.5 mm

POM

Extractor

048.453

Length 100 mm

Stainless steel

125 124

048.073V4

Length 5 mm

POM

Glide hole drill

044.125

Length 37 mm/Stop 20 mm/ Ø 1.5 mm

Stainless steel

55 55

241

INDEX ALPHABETICAL INDEX

Fixation pin

Page

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

gonyX™ drill set

034.066

Ø 3.8 mm/Ø 4.6 mm/Ø 5.4 mm/ Ø 6.3 mm/Ø 7.3 mm

Stainless steel

Guide cylinder

049.082

Length 10.5 mm/Ø 3.6 mm

Stainless steel

52, 64

Guide cylinder

049.083

Length 10.5 mm/Ø 4.2 mm

Stainless steel

Guide cylinder

049.167

Length 10.5 mm/Ø 4.9 mm

Stainless steel

Guide pin

046.246

Length 50 mm

Stainless steel

78, 98

Guide pin

046.242

Length 50 mm

Stainless steel

116

Guide pin

046.244

Length 50 mm

Stainless steel

Handle

046.240

Length 65 mm

Steel/Brass

Hexagonal screwdriver

046.421

Length 30 mm

Stainless steel

Holding key

046.064

Length 85 mm

Stainless steel

57, 73

Illustration model: Straumann ® Standard Implant

140.120

Metal/Plastic

216

Implant distance indicator for Standard, Standard Plus and 046.148 Tapered Effect

Length 100 mm

Ti/Stainless steel

Impression post for open tray

025.2243

Ø 3.5 mm

TAN

Impression post for open tray

025.2244

Ø 4.6 mm

TAN

Instrument tweezers

046.110

Length 140 mm

Stainless steel

Light curette for implants

045.921

LOCATOR® Abutment holder sleeve

046.413V4

LOCATOR® Angle measurement guide

048.200

LOCATOR® Black processing male

048.195V4

LOCATOR® Block-out spacer

Page

119 78, 95, 98, 101, 105, 106, 113, 116, 119

47 165 181 57, 73 58

INDEX ALPHABETICAL INDEX

PSU

129, 133, 139, 188, 197

Length 50 mm/Width 15 mm

Stainless steel

129, 133, 139, 188, 197

Height 1.9 mm

LDPE

129, 133, 139, 188, 197

048.196V20

Thickness 0.4 mm

Silicone rubber

LOCATOR® Core tool

046.415

Length 100 mm

Stainless steel

LOCATOR® Female analog

048.198V4

Length 10 mm/Ø 5 mm

LOCATOR® Female analog

025.0120-04

Length 10 mm/Ø 4 mm

LOCATOR® Impression coping

048.197V4

Height 4 mm

Al housing with LDPE insert

129, 133, 139, 188, 197

LOCATOR® Male processing package

048.189V2

Ti/Nylon

127, 131, 137, 186, 195

LOCATOR® Male processing package

048.182V2

Ti/Nylon

128, 132, 138, 187, 196

LOCATOR® Parallel post

048.199V4

Length 8 mm

LDPE

129, 133, 139, 188, 197

LOCATOR® Processing spacer

048.218V4

POM

129, 133, 139, 188, 197

LOCATOR® Replacement male

048.192V4

Height 1.7 mm

Nylon

127, 131, 137, 186, 195

LOCATOR® Replacement male

048.190V4

Height 1.7 mm

Nylon

127, 131, 137, 186, 195

LOCATOR® Replacement male

048.191V4

Height 1.7 mm

Nylon

127, 131, 137, 186, 195

LOCATOR® Replacement male

048.193V4

Height 1.7 mm

Nylon

128, 132, 138, 187, 196

LOCATOR® Replacement male

048.194V4

Height 1.7 mm

Nylon

128, 132, 138, 187, 196

LOCATOR® Replacement male

048.188V4

Height 1.7 mm

Nylon

128, 132, 138, 187, 196

LOCATOR® Replacement male

048.181V4

Height 1.7 mm

Nylon

LOCATOR® Screwdriver

046.416

Length 15 mm

Stainless steel

77, 129, 133, 139, 188, 197

LOCATOR® Screwdriver

046.417

Length 21 mm

Stainless steel

77, 129, 133, 139, 188, 197

Lower jaw

140.049

Plastic, acrylic-glass/Ti

217

Lower jaw

140.032

Plastic, acrylic-glass/Ti

217

Milling cutter

034.215

Length 32.5 mm/Ø 2.8 mm

Stainless steel

Milling cutter

034.415

Length 32.5 mm/Ø 3.5 mm

Stainless steel

Milling cutter

034.615

Length 32.5 mm/Ø 4.2 mm

Stainless steel

Mucosa punch

034.011

Length 30 mm/Ø 4 mm

Stainless steel

Mucosa punch

034.012

Length 30 mm/Ø 4.7 mm

Stainless steel

Mucosa punch

034.010

Length 30 mm/Ø 3.4 mm

Stainless steel

NC Abutment

022.2701

Height 10 mm

Ceramicor®

189

NC Abutment

022.2702

Height 10 mm

191

NC Analog

023.2754

Ø 3.5 mm

TAN

165

NC Anatomic abutment

022.2104

Gingiva height 3.5 mm

155

NC Anatomic abutment

022.2152

Gingiva height 2 mm

155

NC Anatomic abutment

022.2154

Gingiva height 3.5 mm

155

NC Anatomic abutment

022.2102

Gingiva height 2 mm

155

NC Basal screw

025.2906

Length 8.9 mm

TAN

150

NC Basal screw

025.2900

Length 7.9 mm

TAN

150, 153, 155, 156, 168, 192, 193

NC Basal screw

025.2908

Length 7.9 mm

TAN

162

NC Bite registration aid

025.2212-04

Height 12 mm

POM

152

NC Bite registration aid

025.2208-04

Height 8 mm

POM

152

NC Burn-out coping

023.2748

Ø 3.5 mm/Height 11 mm

POM

167

NC Burn-out coping

023.2755

Ø 3.5 mm/Height 11 mm

POM

167

NC Burn-out coping

023.4758

Ø 4.6 mm/Height 11 mm

POM

167, 183

NC Burn-out coping

023.2756

Ø 3.8 mm/Height 12 mm

POM

156

NC Cementable abutment

022.2312

Ø 3.5 mm/Gingiva height 2 mm/ Abutment height 4 mm

158

242

129, 133, 139, 188, 197 77, 129, 133, 139, 188, 197 129, 133, 139 188, 197

128, 132, 138, 187, 196

ALPHABETICAL INDEX

Ar t. No.

Dimensions

Material

NC Cementable abutment

022.2313

Ø 3.5 mm/Gingiva height 3 mm/ Abutment height 4 mm

Page 158

NC Cementable abutment

022.2315

Ø 3.5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

158

NC Cementable abutment

022.2316

Ø 3.5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

158

NC Cementable abutment

022.2317

Ø 3.5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

158

NC Cementable abutment

022.2311

Ø 3.5 mm/Gingiva height 1 mm/ Abutment height 4 mm

158

NC Cementable abutment

022.2321

Ø 5 mm/Gingiva height 1 mm/ Abutment height 4 mm

159

NC Cementable abutment

022.2322

Ø 5 mm/Gingiva height 2 mm/ Abutment height 4 mm

159

NC Cementable abutment

022.2323

Ø 5 mm/Gingiva height 3 mm/ Abutment height 4 mm

159

NC Cementable abutment

022.2325

Ø 5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

159

NC Cementable abutment

022.2326

Ø 5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

159

NC Cementable abutment

022.2327

Ø 5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

159

NC Cementable All-in-One Set

027.4302

Ø 3.5 mm/Abutment height 4 mm/ Gingiva height 2 mm

157

NC Cementable All-in-One Set

027.4303

Ø 3.5 mm/Abutment height 4 mm/ Gingiva height 3 mm

157

NC Cementable All-in-One Set

027.4307

Ø 5 mm/Abutment height 4 mm/ Gingiva height 1 mm

157

NC Cementable All-in-One Set

027.4308

Ø 5 mm/Abutment height 4 mm/ Gingiva height 2 mm

157

NC Cementable All-in-One Set

027.4309

Ø 5 mm/Abutment height 4 mm/ Gingiva height 3 mm

157

NC Cementable All-in-One Set

027.4310

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 1 mm

157

NC Cementable All-in-One Set

027.4311

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 2 mm

157

NC Cementable All-in-One Set

027.4312

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 3 mm

157

NC Cementable All-in-One Set

027.4301

Ø 3.5 mm/Abutment height 4 mm/ Gingiva height 1 mm

157

NC Coping

023.2316

Ø 3.5 mm

POM

162

NC Coping

023.2320

Ø 5 mm

POM

162

NC Coping

023.2326

Ø 5 mm

POM

162

NC Coping

023.2310

Ø 3.5 mm

POM

162

NC Coping

023.2741

Ø 4.5 mm

Ceramicor®/POM

167

NC Coping

023.2734

Ø 3.5 mm

POM

167

NC Coping

023.2744

Ø 4.5 mm

POM

167

NC Coping

023.2701

Ø 4 mm

Ceramicor®/POM

167

NC Coping

023.2704

Ø 4 mm

POM

167

NC Coping

023.2749

Ø 3.5 mm/Height 11 mm

167

NC Coping

023.2750

Ø 3.5 mm/Height 5.5 mm

167

NC Coping

023.2731

Ø 3.5 mm

Ceramicor®/POM

167

NC Coping

023.2747

Ø 3.5 mm/Height 11 mm

167

NC Coping

023.2742

Ø 4.5 mm

Ceramicor®

189

NC Coping

023.2732

Ø 3.5 mm

Ceramicor®

189

NC Coping

023.2702

Ø 4 mm

Ceramicor®

189

NC Coping

023.2736

Ø 3.5 mm

191

243

INDEX ALPHABETICAL INDEX

Ar ticle

ALPHABETICAL INDEX

INDEX ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

NC Coping

023.2746

Ø 4.5 mm

191

NC Coping

023.2706

Ø 4 mm

191

NC Gold abutment

022.2410

Height 3.7 mm

Ceramicor®/POM

154

NC Guiding cylinder

026.2801

Length 10.7 mm/Ø 3.6 mm

Stainless steel

NC Implant analog

025.2101

Length 12 mm

152

NC Implant analog

025.2112

Ø 3.5 mm/Abutment height 4 mm

TAN

160

NC Implant analog

025.2116

Ø 3.5 mm/Abutment height 5.5 mm

TAN

160

NC Implant analog

025.2122

Ø 5 mm/Abutment height 4 mm

TAN

160

NC Implant analog

025.2126

Ø 5 mm/Abutment height 5.5 mm

TAN

160

NC Implant analog

025.2131

Ø 3.5 mm

TAN

165

NC Implant analog

025.2141

Ø 4.5 mm

TAN

165

NC Implant analog

025.2106

Ø 4 mm

TAN

165

NC Impression cap

025.2204-04

Ø 5 mm/Abutment height 4 mm

POM

160

NC Impression cap

025.2220-04

Ø 5 mm/Abutment height 5.5 mm

POM

160

NC Impression cap

025.2203-04

Ø 3.5 mm/Abutment height 4 mm

POM

160

NC Impression cap

025.2241-04

Ø 4.5 mm

POM

165

NC Impression cap

025.2231-04

Ø 3.5 mm

POM

165

NC Impression post

025.2202

Length 16.5 mm

TAN

152

NC Impression post

025.2201

Length 12.3 mm

TAN/POM

152

NC Impression post

025.2205

Length 24 mm

TAN

152

NC Impression post

025.2232

Ø 3.5 mm

TAN

165

NC Impression post

025.2242

Ø 4.5 mm

TAN

165

NC Impression post

025.2206

Ø 4 mm

TAN

165

NC LOCATOR® Abutment

022.2503

Height 3 mm

TAV

185

NC LOCATOR® Abutment

022.2504

Height 4 mm

TAV

185

NC LOCATOR® Abutment

022.2505

Height 5 mm

TAV

185

NC LOCATOR® Abutment

022.2506

Height 6 mm

TAV

185

NC LOCATOR® Abutment

022.2502

Height 2 mm

TAV

185

NC Meso abutment

022.2202

Height 13.4 mm/Ø 6 mm

NC Multi-base abutment

022.2734

Ø 3.5 mm/Gingiva height 4 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2741

Ø 4.5 mm/Gingiva height 1 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2742

Ø 4.5 mm/Gingiva height 2.5 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2744

Ø 4.5 mm/Gingiva height 4 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2782

Ø 4 mm/Gingiva height 2.5 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2786

Ø 4 mm/Gingiva height 2.5 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2732

Ø 3.5 mm/Gingiva height 2.5 mm

TAN

163, 189, 191

NC Multi-base abutment

022.2731

Ø 3.5 mm/Gingiva height 1 mm

TAN

163, 189, 191

NC PLAN Anatomic abutment

025.2602-04

Gingiva height 3.5 mm

POM

141

NC PLAN Anatomic abutment

025.2603-04

Gingiva height 2 mm

POM

141

NC PLAN Anatomic abutment

025.2604-04

Gingiva height 3.5 mm

POM

141

NC PLAN Anatomic abutment

025.2601-04

Gingiva height 2 mm

POM

141

NC PLAN Cementable abutment

025.2612-04

Ø 3.5 mm/Gingiva height 2 mm/ Abutment height 4 mm

POM

142

NC PLAN Cementable abutment

025.2613-04

Ø 3.5 mm/Gingiva height 3 mm/ Abutment height 4 mm

POM

142

NC PLAN Cementable abutment

025.2616-04

Ø 3.5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2617-04

Ø 3.5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2621-04

Ø 5 mm/Gingiva height 1 mm/ Abutment height 4 mm

POM

142

NC PLAN Cementable abutment

025.2622-04

Ø 5 mm/Gingiva height 2 mm/ Abutment height 4 mm

POM

142

244

Page

155

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

NC PLAN Cementable abutment

025.2623-04

Ø 5 mm/Gingiva height 3 mm/ Abutment height 4 mm

POM

Page 142

NC PLAN Cementable abutment

025.2625-04

Ø 5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2626-04

Ø 5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2627-04

Ø 5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2615-04

Ø 3.5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

POM

142

NC PLAN Cementable abutment

025.2611-04

Ø 3.5 mm/Gingiva height 1 mm/ Abutment height 4 mm

POM

142

NC PLAN Gold abutment

025.2610-04

Height 3.2 mm

POM

141

NC PLAN LOCATOR® Abutment

025.2643-04

Height 3 mm

POM

147

NC PLAN LOCATOR® Abutment

025.2644-04

Height 4 mm

POM

147

NC PLAN LOCATOR® Abutment

025.2645-04

Height 5 mm

POM

147

NC PLAN LOCATOR® Abutment

025.2646-04

Height 6 mm

POM

147

NC PLAN LOCATOR® Abutment

025.2642-04

Height 2 mm

POM

147

NC PLAN Multi-base abutment

025.2652-04

Ø 3.5 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Multi-base abutment

025.2654-04

Ø 3.5 mm/Gingiva height 4 mm

POM

144

NC PLAN Multi-base abutment

025.2656-04

Ø 4.5 mm/Gingiva height 1 mm

POM

144

NC PLAN Multi-base abutment

025.2657-04

Ø 4.5 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Multi-base abutment

025.2659-04

Ø 4.5 mm/Gingiva height 4 mm

POM

144

NC PLAN Multi-base abutment

025.2662-04

Ø 4 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Multi-base abutment

025.2665-04

Ø 4 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Multi-base abutment

025.2651-04

Ø 3.5 mm/Gingiva height 1 mm

POM

144

NC PLAN Screw-retained abutment

025.2648-04

Ø 3.5 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Screw-retained abutment

025.2650-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Screw-retained abutment

025.2655-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Screw-retained abutment

025.2658-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

144

NC PLAN Screw-retained abutment

025.2653-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

145

NC PLAN Screw-retained abutment

025.2660-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

145

NC Polishing aid

025.2920

Length 16 mm

Stainless steel

NC Protective cap

024.2312-04

Ø 3.5 mm/Abutment height 4 mm

PEEK

161

NC Protective cap

024.2316-04

Ø 3.5 mm/Abutment height 5.5 mm

PEEK

161

NC Protective cap

024.2322-04

Ø 5 mm/Abutment height 4 mm

PEEK

161

NC Protective cap

024.2326-04

Ø 5 mm/Abutment height 5.5 mm

PEEK

161

NC Protective cap

024.2331-04

Ø 3.5 mm

PEEK/TAN

166

NC Protective cap

024.2341-04

Ø 4.5 mm

PEEK/TAN

166

NC Protective cap

024.2306-04

Ø 4 mm

PEEK/TAN

166

NC Protective cap

024.2324-04

Ø 3.5 mm/Height 6.5 mm

PEEK

166

NC Protective cap

024.2325-04

Ø 3.5 mm/Height 8 mm

PEEK

166

NC Protective cap

024.2323-04

Ø 3.5 mm/Height 5 mm

PEEK

NC Repositionable implant analog

025.2102

Length 17 mm

Stainless steel

NC Scanbody

025.2901-04

Length 13.3 mm/Ø 4 mm

PEEK/ABS

150

NC Screw-retained abutment

022.2746

Ø 3.5 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2753

Ø 3.5 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2747

Ø 4.6 mm/Gingiva height 1 mm

TAN

164

155, 168, 193

166

245

INDEX ALPHABETICAL INDEX

150, 152

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

NC Screw-retained abutment

022.2748

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2754

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2749

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2750

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2755

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2756

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2751

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2752

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

164

NC Screw-retained abutment

022.2757

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2758

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

164

NC Screw-retained abutment

022.2745

Ø 3.5 mm/Gingiva height 1 mm

TAN

164

NC Straumann® Anatomic IPS e.max® abutment

022.2812

Gingiva height 2 mm

ZrO2/MO 0

154

NC Straumann® Anatomic IPS e.max® abutment

022.2814

Gingiva height 3.5 mm

ZrO2/MO 0

154

abutment

022.2822

Gingiva height 2 mm

ZrO2/MO 0

154

NC Straumann® Anatomic IPS e.max® abutment

022.2824

Gingiva height 3.5 mm

ZrO2/MO 0

154

NC Straumann® Anatomic IPS e.max® abutment

022.2832

Gingiva height 2 mm

ZrO2/MO 1

154

NC Straumann® Anatomic IPS e.max® abutment

022.2834

Gingiva height 3.5 mm

ZrO2/MO 1

154

abutment

022.2842

Gingiva height 2 mm

ZrO2/MO 1

154

NC Straumann® Anatomic IPS e.max® abutment

022.2844

Gingiva height 3.5 mm

ZrO2/MO 1

154

NC Straumann® Scanbody

025.2905

Length 11.7 mm

PEEK/TAN

150

NC Temporary abutment

024.2371

Height 11 mm/Ø 3.5 mm

TAN

152

NC Temporary abutment

024.2375

Height 11 mm/Ø 3.5 mm

TAN

152

NC Temporary Abutment VITA CAD-Temp®

024.2372

Height 11 mm/Ø 5 mm

PMMA/TAN

152

NC Temporary coping

024.2356

Ø 5 mm

PMMA

161

NC Temporary coping

024.2346

Ø 3.5 mm

PMMA

161

NC Temporary coping

024.2342

Ø 4.5 mm

166

NC Temporary coping

024.2307

Ø 4 mm

166

NC Temporary coping

024.2332

Ø 3.5 mm

166

NC Transfer aid

025.2912-04

Ø 5 mm

162

NC Transfer aid

025.2911-04

Ø 3.5 mm

162

NC Variobase™ Abutment

025.2921

Ø 3.8 mm/Height 3.5 mm

TAN

156

NC Wax-up sleeve

025.2903

Length 15.2 mm

PEEK

150

NC/RC Analog

023.4756

Ø 4.6 mm

TAN

165, 181

NC/RC Analog

023.4757

Ø 4.6 mm

TAN

165, 181

NC/RC Burn-out coping

023.4748

Ø 4.6 mm/Height 11 mm

POM

167, 183

NC/RC Coping

023.4747

Ø 4.6 mm/Height 11 mm

184

NC/RC Coping

023.4751

Ø 4.6 mm/Height 11 mm

184

NC/RC Coping

023.4752

Ø 4.6 mm/Height 5.5 mm

NC/RC Occlusal screw

025.0900-04

Length 4.5 mm

TAN

168, 184, 190, 192, 193, 201, 203, 204

NC/RC Occlusal screw

023.4763

Length 3.3 mm

TAN

168, 184

NC/RC Protective cap

024.4324-04

Ø 4.6 mm/Height 6.6 mm

PEEK

182

NC/RC Protective cap

024.4325-04

Ø 4.6 mm/Height 8.1 mm

PEEK

182

NC/RC Protective cap

024.4323-04

Ø 4.6 mm/Height 5.1 mm

PEEK

182

NC/RC Screw

023.4749

Gingiva height 1.0 mm

TAN

168, 184

NC/RC Screw

023.4750

Gingiva height 2.5 mm

TAN

168, 184

NC/RC Screw

023.4760

Gingiva height 4.0 mm

TAN

168, 184

NC/RC SRBB Bone Level screw

025.2926

Length 7.9 mm

TAN

NC/RC Stabilization pin

025.0911-04

Length 16 mm

Stainless steel

ND Implant Analog

031.200

Abutment height 4 mm

TAN

ND Implant Analog

031.201

Abutment height 5.5 mm

TAN

ND Impression Cap

031.250

Abutment height 4 mm

POM

Straumann®

INDEX ALPHABETICAL INDEX

246

Anatomic IPS

e.max®

Page

184

150 190, 193, 201, 204

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

ND Impression Cap

031.251

Abutment height 5.5 mm

POM

Page 45

ND Position indicator

031.103

Ø 2.8 mm/Abutment height 4 mm/ Length 8 mm

ND Position indicator

031.112

Ø 2.2 mm/Abutment height 5.5 mm/ Ti Length 8 mm

ND Position indicator

031.113

ZLA™ 2.8 mm/Abutment height 5.5 mm/Length 8 mm

ND Position indicator

031.102

Ø 2.2 mm/Abutment height 4 mm/ Length 8 mm

ND Protective Cap

031.320

Abutment height 4 mm

PEEK

ND Protective Cap

031.321

Abutment height 5.5 mm

PEEK

ND Temporary Coping

031.300

PMMA

ND Temporary Coping

031.301

PMMA

NNC Analog

048.527

Height 14.3 mm

TAN

111

NNC Analog

048.528

Height 15.8 mm

TAN

111

NNC Analog

048.529

Height 17.3 mm

TAN

111

NNC Basal screw

048.314

Length 7.1 mm

TAN

88, 89

NNC Basal screw

048.313

Length 7.1 mm

TAN

88, 91, 92

NNC Bite registration aid

048.960V4

Height 8 mm

POM

NNC Bite registration aid

048.961V4

Height 12 mm

POM

NNC Burn-out coping

048.267

Ø 3.9 mm/Height 11.1 mm

POM

NNC Cementable abutment

048.621

Height 5.9 mm

NNC Cementable abutment

048.622

Height 5.9 mm

NNC Cementable abutment

048.598

Height 5.7 mm

NNC Gold abutment

048.593

Height 3.6 mm

Ceramicor®/TAN/POM

NNC Gold abutment

048.592

Height 3.6 mm

Ceramicor®/TAN/POM

NNC Guide pin

046.249

Length 50 mm

Stainless steel

NNC Implant analog

048.127

Length 12.5 mm

NNC Impression cap

048.579

Height 8 mm

POM

NNC Impression post

048.134

Height 10.9 mm

POM/TAN

NNC Impression post

048.128

Height 10.1 mm

TAN

NNC LOCATOR® Abutment

048.582

Height 2 mm

TAV

126

NNC LOCATOR® Abutment

048.583

Height 3 mm

TAV

126

NNC LOCATOR® Abutment

048.584

Height 4 mm

TAV

126

NNC LOCATOR® Abutment

048.585

Height 5 mm

TAV

126

NNC LOCATOR® Abutment

048.586

Height 6 mm

TAV

126

NNC LOCATOR® Abutment

048.581

Height 1 mm

TAV

126

NNC PLAN Cementable abutment, angled 15°,

048.944V4

Height 5.9 mm

POM

NNC PLAN Cementable abutment, angled 15°,

048.945V4

Height 5.9 mm

POM

NNC PLAN Cementable abutment, straight,

048.943V4

Height 5.7 mm

POM

NNC PLAN Locator® Abutment

048.946V4

Height 1 mm

POM

NNC PLAN Locator® Abutment

048.947V4

Height 2 mm

POM

NNC PLAN Locator® Abutment

048.948V4

Height 3 mm

POM

NNC PLAN Locator® Abutment

048.949V4

Height 4 mm

POM

NNC PLAN Locator® Abutment

048.950V4

Height 5 mm

POM

NNC PLAN Locator® Abutment

048.951V4

Height 6 mm

POM

NNC PLAN Solid abutment

048.952V4

Height 4 mm

POM

NNC PLAN Solid abutment

048.953V4

Height 5.5 mm

POM

NNC PLAN Solid abutment

048.954V4

Height 7 mm

POM

NNC Plastic coping

048.264

Height 10.2 mm

POM

113

NNC Plastic coping

048.263

Height 10.2 mm

POM

113

NNC Plastic coping

048.257

Height 7 mm

POM

NNC Plastic coping

048.258

Height 7.2 mm

POM

NNC Plastic coping

048.256

Height 7 mm

POM

NNC Positioning cylinder

048.587

Height 10.2 mm

POM

111

NNC Positioning cylinder

048.588

Height 10.2 mm

POM

111

NNC Positioning cylinder

048.589

Height 10.2 mm

POM

111

NNC Post

048.502

Height 10.3 mm

TAN

NNC Post

048.501

Height 10.3 mm

TAN

NNC Protective cap

048.700

Height 5.6 mm

PEEK

112

NNC Protective cap

048.701

Height 7.1 mm

PEEK

112

NNC Protective cap

048.702

Height 8.6 mm

PEEK

NNC Reamer

046.237

Ø 8 mm/Length 17 mm

Carbide metal

91 78, 113 88 111 88 88

112 78, 113

247

INDEX ALPHABETICAL INDEX

ALPHABETICAL INDEX

INDEX ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

NNC Solid abutment

048.547

Height 4 mm

110

NNC Solid abutment

048.548

Height 5.5 mm

110

NNC Solid abutment

048.549

Height 7 mm

110

NNC Solid abutment driver

048.156

Length 19 mm

Stainless steel

110

NNC Solid abutment driver

048.155

Length 13 mm

Stainless steel

110

NNC Temporary Abutment VITA CAD-Temp®

048.699

Height 10 mm/Ø 5 mm

PMMA/TAN

NNC Temporary coping

048.659

Height 8.5 mm

PMMA

112

NNC Temporary coping

048.658

Height 8.5 mm

PMMA

112

NNC Variobase™ Abutment

048.709

Ø 3.9 mm/Height 3.75 mm

TAN

Occlusal screw

048.304C

Length 15 mm

213

Octa abutment

048.404C

Height 1.5 mm

210

Osteotome

046.500

Ø 2.2 mm

Stainless steel

Osteotome

046.501

Ø 2.8 mm

Stainless steel

Osteotome

046.502

Ø 3.5 mm

Stainless steel

Osteotome

046.503

Ø 4.2 mm

Stainless steel

Osteotome

046.510

Ø 2.2 mm

Stainless steel

Osteotome

046.511

Ø 2.8 mm

Stainless steel

Osteotome

046.512

Ø 3.5 mm

Stainless steel

Osteotome

046.513

Ø 4.2 mm

Stainless steel

Osteotome

046.521

Ø 2.8 mm

Stainless steel

Osteotome

046.522

Ø 3.5 mm

Stainless steel

Osteotome

046.523

Ø 4.2 mm

Stainless steel

Osteotome

046.531

Ø 2.8 mm

Stainless steel

Osteotome

046.532

Ø 3.5 mm

Stainless steel

Osteotome

046.533

Ø 4.2 mm

Stainless steel

Osteotome instrument kit

040.500

Stainless steel/Plastic

Osteotome instrument kit

040.501

Stainless steel/Plastic

Pilot drill

034.126

Length 36 mm/Ø 2.2 mm

Stainless steel

Pilot drill

034.129

Length 40 mm/Ø 2.2 mm

Stainless steel

Pilot drill

034.123

Length 32 mm/Ø 2.2 mm

Stainless steel

Pilot drill 1

044.211

Length 41 mm/Ø 2.2 mm

Stainless steel

Pilot drill 1

044.210

Length 33 mm/Ø 2.2 mm

Stainless steel

Pilot drill 2

044.214

Length 33 mm/Ø 2.8 mm

Stainless steel

Pilot drill 2

044.215

Length 41 mm/Ø 2.8 mm

Stainless steel

049.816V4

Length 16 mm/Ø 2.2 mm

049.817V4

Length 10 mm/Ø 2.2 mm

049.819V4

Length 16 mm/Ø 3.5 mm

Pin abutment

048.424C

Plastic bar

048.460

Length 80 mm/Height 3 mm

PMMA

123, 192, 203

Plastic bar

048.461

Length 80 mm/Height 2.3 mm

PMMA

123, 192, 203

Plastic coping

048.246

Height 10 mm

POM

116

Plastic coping

048.245

Height 10 mm

POM

116

Plastic coping

048.248

Height 7 mm

POM

119

Plastic coping

048.247

Height 7 mm

POM

119

Plastic coping for abutment 8°

048.220C

POM

213

Plastic shoulder

048.676V4

Height 4 mm

POM

Plastic shoulder

048.678

Height 4 mm

POM

107

Plexiglass cassette/Membranette

140.055

Length 150 mm/Width 100 mm

Plastic

Polishing protector

046.245

Length 15 mm

Stainless steel

Positioning cylinder

048.060V4

Height 10.2 mm

POM

115

Positioning cylinder

048.061V4

Height 10.2 mm

POM

115

Positioning cylinder

048.062V4

Height 10.2 mm

POM

115

Positioning cylinder

048.065

Height 10 mm

POM

117

Positioning cylinder

048.066

Height 10 mm

POM

117

Prosthetic cassette

040.185

Length 224 mm/Width 115 mm/ Height 20 mm

Anodized Al

Prosthetic cassette

041.022

Length 224 mm/Width 115 mm/ Height 20 mm

Anodized Al

Prosthetic planning kit

048.901

Protective cap

031.330

Abutment height 4 mm

PEEK

Protective cap

031.331

Abutment height 5.5 mm

PEEK

Ratchet

046.119

Length 84 mm

Stainless steel

RC Abutment

022.4701

Height 10 mm

Ceramicor®

200

RC Abutment

022.4702

Height 10 mm

202

248

Ceramicor®

Page

48 213

76 95, 124

57, 73, 78

ALPHABETICAL INDEX

Ar t. No.

Dimensions

Material

RC Anatomic abutment

022.4104

Gingiva height 3.5 mm

Page 171

RC Anatomic abutment

022.4152

Gingiva height 2 mm

171

RC Anatomic abutment

022.4154

Gingiva height 3.5 mm

171

RC Anatomic abutment

022.4102

Gingiva height 2 mm

171

RC Basal screw

025.4906

Length 8.2 mm

TAN

150

RC Basal screw

025.4900

Length 7.9 mm

TAN

150, 169, 171, 172, 184, 190, 201, 203, 204

RC Basal screw

025.4902

Length 8.3 mm

TAN

171, 184

RC Basal screw

025.4908

Length 7.9 mm

TAN

178, 184

RC Bite registration aid

025.4212-04

Height 12 mm

POM

169

RC Bite registration aid

025.4208-04

Height 8 mm

POM

169

RC Burn-out coping

023.4759

Ø 4.5 mm/Height 12 mm

POM

172

RC Cementable abutment

022.4322

Ø 5 mm/Gingiva height 2 mm/ Abutment height 4 mm

174

RC Cementable abutment

022.4323

Ø 5 mm/Gingiva height 3 mm/ Abutment height 4 mm

174

RC Cementable abutment

022.4325

Ø 5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

174

RC Cementable abutment

022.4327

Ø 5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

174

RC Cementable abutment

022.4326

Ø 5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

174

RC Cementable abutment

022.4321

Ø 5 mm/Gingiva height 1 mm/ Abutment height 4 mm

174

RC Cementable abutment

022.4332

Ø 6.5 mm/Gingiva height 2 mm/ Abutment height 4 mm

175

RC Cementable abutment

022.4333

Ø 6.5 mm/Gingiva height 3 mm/ Abutment height 4 mm

175

RC Cementable abutment

022.4335

Ø 6.5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

175

RC Cementable abutment

022.4336

Ø 6.5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

175

RC Cementable abutment

022.4337

Ø 6.5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

175

RC Cementable abutment

022.4331

Ø 6.5 mm/Gingiva height 1 mm/ Abutment height 4 mm

175

RC Cementable All-in-One Set

027.4314

Ø 5 mm/Abutment height 4 mm/ Gingiva height 2 mm

173

RC Cementable All-in-One Set

027.4315

Ø 5 mm/Abutment height 4 mm/ Gingiva height 3 mm

173

RC Cementable All-in-One Set

027.4316

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 1 mm

173

RC Cementable All-in-One Set

027.4317

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 2 mm

173

RC Cementable All-in-One Set

027.4318

Ø 5 mm/Abutment height 5.5 mm/ Gingiva height 3 mm

173

RC Cementable All-in-One Set

027.4319

Ø 6.5 mm/Abutment height 4 mm/ Gingiva height 1 mm

173

RC Cementable All-in-One Set

027.4320

Ø 6.5 mm/Abutment height 4 mm/ Gingiva height 2 mm

173

RC Cementable All-in-One Set

027.4321

Ø 6.5 mm/Abutment height 4 mm/ Gingiva height 3 mm

173

RC Cementable All-in-One Set

027.4313

Ø 5 mm/Abutment height 4 mm/ Gingiva height 1 mm

173

RC Cementable All-in-One Set

027.4323

Ø 6.5 mm/Abutment height 5.5 mm/ Gingiva height 2 mm

174

RC Cementable All-in-One Set

027.4324

Ø 6.5 mm/Abutment height 5.5 mm/ Gingiva height 3 mm

174

249

INDEX ALPHABETICAL INDEX

Ar ticle

ALPHABETICAL INDEX

INDEX ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

RC Cementable All-in-One Set

027.4322

Ø 6.5 mm/Abutment height 5.5 mm/ Gingiva height 1 mm

RC Coping

023.4326

Ø 5 mm

POM

178

RC Coping

023.4330

Ø 6.5 mm

POM

178

RC Coping

023.4336

Ø 6.5 mm

POM

178

RC Coping

023.4320

Ø 5 mm

POM

178

RC Coping

023.4761

Ø 6.5 mm

Ceramicor®/POM

183

RC Coping

023.4744

Ø 4.5 mm

POM

183

RC Coping

023.4764

Ø 6.5 mm

POM

183

RC Coping

023.4701

Ø 4 mm

Ceramicor®/POM

183

RC Coping

023.4704

Ø 4 mm

POM

183

RC Coping

023.4741

Ø 4.5 mm

Ceramicor®/POM

183

RC Coping

023.4742

Ø 4.5 mm

Ceramicor®

200

RC Coping

023.4762

Ø 6.5 mm

Ceramicor®

200

RC Coping

023.4702

Ø 4 mm

Ceramicor®

200

RC Coping

023.4746

Ø 4.5 mm

202

RC Coping

023.4766

Ø 6.5 mm

202

RC Coping

023.4706

Ø 4 mm

202

RC Gold abutment

022.4410

Height 3.8 mm

Ceramicor®/POM

170

RC Gold abutment

022.4430

Height 5.2 mm

Ceramicor®/POM

170

RC Guiding cylinder

026.4801

Length 10.9 mm/Ø 4.2 mm

Stainless steel

RC Guiding cylinder

026.6801

Length 10.9 mm/Ø 4.9 mm

Stainless steel

RC Implant analog

025.4101

Length 12 mm

169

RC Implant analog

025.4122

Ø 6.5 mm/Abutment height 4 mm

TAN

176

RC Implant analog

025.4126

Ø 6.5 mm/Abutment height 5.5 mm

TAN

176

RC Implant analog

025.4132

Ø 5 mm/Abutment height 4 mm

TAN

176

RC Implant analog

025.4136

Ø 5 mm/Abutment height 5.5 mm

TAN

176

RC Implant analog

025.4141

Ø 4.5 mm

TAN

181

RC Implant analog

025.4161

Ø 6.5 mm

TAN

181

RC Implant analog

025.4106

Ø 4 mm

TAN

181

RC Impression cap

025.4220-04

Ø 5 mm/Abutment height 5.5 mm

POM

176

RC Impression cap

025.4204-04

Ø 6.5 mm/Abutment height 4 mm

POM

176

RC Impression cap

025.4230-04

Ø 6.5 mm/Abutment height 5.5 mm

POM

176

RC Impression cap

025.4203-04

Ø 5 mm/Abutment height 4 mm

POM

176

RC Impression cap

025.4261-04

Ø 6.5 mm

POM

181

RC Impression cap

025.4241-04

Ø 4.5 mm

POM

181

RC Impression post

025.4202

Length 16.5 mm

TAN

169

RC Impression post

025.4201

Length 12.3 mm

TAN/POM

169

RC Impression post

025.4205

Length 24 mm

TAN

169

RC Impression post

025.4242

Ø 4.5 mm

TAN

181

RC Impression post

025.4262

Ø 6.5 mm

TAN

181

RC Impression post

025.4206

Ø 4 mm

TAN

181

RC LOCATOR® Abutment

022.4502

Height 2 mm

TAV

194

RC LOCATOR® Abutment

022.4503

Height 3 mm

TAV

194

RC LOCATOR® Abutment

022.4504

Height 4 mm

TAV

194

RC LOCATOR® Abutment

022.4505

Height 5 mm

TAV

194

RC LOCATOR® Abutment

022.4506

Height 6 mm

TAV

194

RC LOCATOR® Abutment

022.4501

Height 1 mm

TAV

194

RC Meso abutment

022.4202

Height 13.4 mm/Ø 8 mm

RC Multi-base abutment

022.4742

Ø 4.5 mm/Gingiva height 2.5 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4744

Ø 4.5 mm/Gingiva height 4 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4761

Ø 6.5 mm/Gingiva height 1 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4762

Ø 6.5 mm/Gingiva height 2.5 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4764

Ø 6.5 mm/Gingiva height 4 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4782

Ø 4 mm/Gingiva height 2.5 mm

TAN

179, 200, 202

RC Multi-base abutment

022.4786

Ø 4 mm/Gingiva height 2.5 mm

TAN

179, 200, 202

250

Material

Page 174

64 64

171

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

RC Multi-base abutment

022.4741

Ø 4.5 mm/Gingiva height 1 mm

TAN

Page

RC PLAN Anatomic abutment

025.4601-04

Gingiva height 2 mm

POM

141

RC PLAN Anatomic abutment

025.4602-04

Gingiva height 3.5 mm

POM

141

RC PLAN Anatomic abutment

025.4603-04

Gingiva height 2 mm

POM

141

RC PLAN Anatomic abutment

025.4604-04

Gingiva height 3.5 mm

POM

141

RC PLAN Cementable abutment

025.4635-04

Ø 6.5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4636-04

Ø 6.5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4637-04

Ø 6.5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4622-04

Ø 5 mm/Gingiva height 2 mm/ Abutment height 4 mm

POM

143

RC PLAN Cementable abutment

025.4623-04

Ø 5 mm/Gingiva height 3 mm/ Abutment height 4 mm

POM

143

RC PLAN Cementable abutment

025.4625-04

Ø 5 mm/Gingiva height 1 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4626-04

Ø 5 mm/Gingiva height 2 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4627-04

Ø 5 mm/Gingiva height 3 mm/ Abutment height 5.5 mm

POM

143

RC PLAN Cementable abutment

025.4631-04

Ø 6.5 mm/Gingiva height 1 mm/ Abutment height 4 mm

POM

143

RC PLAN Cementable abutment

025.4632-04

Ø 6.5 mm/Gingiva height 2 mm/ Abutment height 4 mm

POM

143

RC PLAN Cementable abutment

025.4633-04

Ø 6.5 mm/Gingiva height 3 mm/ Abutment height 4 mm

POM

143

RC PLAN Cementable abutment

025.4621-04

Ø 5 mm/Gingiva height 1 mm/ Abutment height 4 mm

POM

143

RC PLAN for Screw-retained abutment,

025.4650-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Gold abutment

025.4610-04

Height 3.3 mm

POM

141

RC PLAN Gold abutment

025.4630-04

Height 5.2 mm

POM

141

RC PLAN LOCATOR® Abutment

025.4641-04

Height 1 mm

POM

147

RC PLAN LOCATOR® Abutment

025.4642-04

Height 2 mm

POM

147

RC PLAN LOCATOR® Abutment

025.4643-04

Height 3 mm

POM

147

RC PLAN LOCATOR® Abutment

025.4644-04

Height 4 mm

POM

147

RC PLAN LOCATOR® Abutment

025.4645-04

Height 5 mm

POM

147

RC PLAN LOCATOR® Abutment

025.4646-04

Height 6 mm

POM

147

RC PLAN Multi-base abutment

025.4652-04

Ø 4.5 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Multi-base abutment

025.4654-04

Ø 4.5 mm/Gingiva height 4 mm

POM

146

RC PLAN Multi-base abutment

025.4656-04

Ø 6.5 mm/Gingiva height 1 mm

POM

146

RC PLAN Multi-base abutment

025.4657-04

Ø 6.5 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Multi-base abutment

025.4659-04

Ø 6.5 mm/Gingiva height 4 mm

POM

146

RC PLAN Multi-base abutment

025.4662-04

Ø 4 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Multi-base abutment

025.4665-04

Ø 4 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Multi-base abutment

025.4651-04

Ø 4.5 mm/Gingiva height 1 mm

POM

146

RC PLAN Screw-retained abutment

025.4648-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Screw-retained abutment

025.4649-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Screw-retained abutment

025.4653-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

146

RC PLAN Screw-retained abutment

025.4660-04

Ø 4.6 mm/Gingiva height 2.5 mm

POM

146

RC Polishing aid

025.4920

Length 16 mm

Stainless steel

171, 184, 204

251

INDEX ALPHABETICAL INDEX

179, 200, 202

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

RC Protective cap

024.4322-04

Ø 5 mm/Abutment height 4 mm

PEEK

177

RC Protective cap

024.4326-04

Ø 5 mm/Abutment height 5.5 mm

PEEK

177

RC Protective cap

024.4332-04

Ø 6.5 mm/Abutment height 4 mm

PEEK

177

RC Protective cap

024.4336-04

Ø 6.5 mm/Abutment height 5.5 mm

PEEK

177

RC Protective cap

024.4341-04

Ø 4.5 mm

PEEK/TAN

182

RC Protective cap

024.4361-04

Ø 6.5 mm

PEEK/TAN

182

RC Protective cap

024.4306-04

Ø 4 mm

PEEK/TAN

RC Repositionable implant analog

025.4102

Length 17 mm

Stainless steel

RC Scanbody

025.4901-04

Length 13.3 mm

PEEK/ABS

151

RC Screw-retained abutment

022.4746

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

180

RC Screw-retained abutment

022.4751

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

180

RC Screw-retained abutment

022.4747

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

180

RC Screw-retained abutment

022.4748

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

180

RC Screw-retained abutment

022.4752

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

180

RC Screw-retained abutment

022.4753

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

180

RC Screw-retained abutment

022.4749

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

180

RC Screw-retained abutment

022.4750

Ø 4.6 mm/Gingiva height 2.5 mm

TAN

180

RC Screw-retained abutment

022.4754

Ø 4.6 mm/Gingiva height 4.0 mm

TAN

180

RC Screw-retained abutment

022.4755

Width 4.6 mm/Gingiva height 4.0 mm

TAN

180

RC Screw-retained abutment

022.4745

Ø 4.6 mm/Gingiva height 1 mm

TAN

180

RC SFI-Anchor® Abutment, Div. 20°

045.041

Height 1 mm

Titanium grade 5

198

RC SFI-Anchor® Abutment, Div. 20°

045.042

Height 2 mm

Titanium grade 5

198

RC SFI-Anchor® Abutment, Div. 20°

045.043

Height 3 mm

Titanium grade 5

198

RC SFI-Anchor® Abutment, Div. 20°

045.044

Height 4 mm

Titanium grade 5

198

RC SFI-Anchor® Abutment, Div. 20°

045.045

Height 5 mm

Titanium grade 5

198

RC SFI-Anchor® Abutment, Div. 60°

045.036

Height 1 mm

Titanium grade 5/POM

198

RC SFI-Anchor® Abutment, Div. 60°

045.037

Height 2 mm

Titanium grade 5/POM

198

RC SFI-Anchor® Abutment, Div. 60°

045.038

Height 3 mm

Titanium grade 5/POM

198

RC SFI-Anchor® Abutment, Div. 60°

045.039

Height 4 mm

Titanium grade 5/POM

198

RC SFI-Anchor® Abutment, Div. 60°

045.040

Height 5 mm

Titanium grade 5/POM

RC SFI-Anchor® Abutment planner

045.062

RC Straumann® Anatomic IPS e.max® abutment

022.4812

Gingiva height 2 mm

ZrO2/MO 0

170

RC Straumann® Anatomic IPS e.max® abutment

022.4814

Gingiva height 3.5 mm

ZrO2/MO 0

170

RC Straumann® Anatomic IPS e.max® abutment

022.4822

Gingiva height 2 mm

ZrO2/MO 0

170

RC Straumann® Anatomic IPS e.max® abutment

022.4824

Gingiva height 3.5 mm

ZrO2/MO 0

170

abutment

022.4832

Gingiva height 2 mm

ZrO2/MO 1

170

RC Straumann® Anatomic IPS e.max® abutment

022.4834

Gingiva height 3.5 mm

ZrO2/MO 1

170

RC Straumann® Anatomic IPS e.max® abutment

022.4842

Gingiva height 2 mm

ZrO2/MO 1

170

RC Straumann® Anatomic IPS e.max® abutment

022.4844

Gingiva height 3.5 mm

ZrO2/MO 1

170

RC Straumann® Scanbody

025.4905

Length 13.4 mm

PEEK/TAN

151

RC Temporary abutment

024.4371

Height 11 mm/Ø 4.5 mm

TAN

169

RC Temporary abutment

024.4375

Height 11 mm/Ø 4.5 mm

TAN

169

RC Temporary Abutment VITA CAD-Temp®

024.4372

Height 12 mm/Ø 7 mm

PMMA/TAN

169

RC Temporary coping

024.4366

Ø 6.5 mm

PMMA

177

RC Temporary coping

024.4356

Ø 5 mm

PMMA

177

RC Temporary coping

024.4362

Ø 6.5 mm

182

RC Temporary coping

024.4307

Ø 4 mm

182

RC Temporary coping

024.4342

Ø 4.5 mm

182

RC Transfer aid

025.4913-04

Ø 6.5 mm

178

RC Transfer aid

025.4912-04

Ø 5 mm

178

Straumann®

INDEX ALPHABETICAL INDEX

252

Anatomic IPS

e.max®

POM

Page

182 151, 169

198 135, 199

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

RC Variobase™ Abutment

025.4921

Ø 4.5 mm/Height 3.5 mm

TAN

172

RC Wax-up sleeve

025.4903

Length 18.8 mm

PEEK

150

RD Analog

031.210

Abutment height 4 mm

TAN

RD Analog

031.211

Abutment height 5.5 mm

TAN

RD Impression cap

031.260

Abutment height 4 mm

POM

RD Impression cap

031.261

Abutment height 5.5 mm

POM

RD Position indicator

031.125

Ø 3.5 mm/Abutment height 4 mm/ Length 8 mm

RD Position indicator

031.143

Ø 2.2 mm/Abutment height 5.5 mm/ Ti Length 8 mm

RD Position indicator

031.145

Ø 3.5 mm/Abutment height 5.5 mm/ Ti Length 8 mm

RD Position indicator

031.123

Ø 2.2 mm/Abutment height 4 mm/ Length 8 mm

RD Temporary coping

031.310

PMMA

RD Temporary coping

031.311

PMMA

Reamer

046.243

Refill package: Drill stop set

040.454S

Plastic

Refill package: Drill stop set

040.455S

Plastic

Refill package: Drill stop set

040.457S

Plastic

Refill package: Drill stop set

040.456S

Plastic

Release aid N for Loxim™

026.2558

Length 90 mm

Stainless steel

Release aid R/W for Loxim™

026.4558

Length 90 mm

Stainless steel

Residual ridge drill

044.126

Length 37 mm/Stop 16 mm/ Ø 1.25 mm

Stainless steel

Retentive anchor abutment

048.439

Height 3.4 mm

Retentive anchor driver

046.069

Length 19 mm

Stainless steel

77, 125

RN Bone profiler

044.304

Inner Ø 3.6/4.8 mm/Outer Ø 5.4 mm/Length 28 mm

Stainless steel

RN Burn-out coping

048.268

Ø 5.05 mm/Height 11.1 mm

POM

RN Guiding sleeve

049.071

Length 5.6 mm/Ø 4.2 mm

Stainless steel

RN Guiding sleeve

049.851

Length 6.4 mm/Ø 4.9 mm

Stainless steel

RN Guiding sleeve

049.850

Length 4.5 mm/Ø 3.6 mm

Stainless steel

RN Impression cap

048.017V4

Height 8 mm

POM

RN LOCATOR® Abutment

048.176

Height 2 mm

TAV

130

RN LOCATOR® Abutment

048.178

Height 4 mm

TAV

130

RN LOCATOR® Abutment

048.180

Height 6 mm

TAV

130

RN LOCATOR® Abutment

048.179

Height 5 mm

TAV

130

RN LOCATOR® Abutment

048.177

Height 3 mm

TAV

130

RN LOCATOR® Abutment

048.175

Height 1 mm

TAV

130

RN Occlusal screw

048.354

Length 5 mm

TAN

RN PLAN LOCATOR® Abutment

048.275V4

Height 1 mm

POM

RN PLAN LOCATOR® Abutment

048.276V4

Height 2 mm

POM

RN PLAN LOCATOR® Abutment

048.277V4

Height 3 mm

POM

RN PLAN LOCATOR® Abutment

048.278V4

Height 4 mm

POM

RN PLAN LOCATOR® Abutment

048.279V4

Height 5 mm

POM

RN PLAN LOCATOR® Abutment

048.280V4

Height 6 mm

POM

RN PLAN Solid abutment

048.926V4

Height 4 mm

POM

RN PLAN Solid abutment

048.927V4

Height 5.5 mm

POM

RN PLAN Solid abutment

048.928V4

Height 7 mm

POM

RN Protective cap

048.047V4

Height 5.8 mm

PEEK

115

RN Protective cap

048.048V4

Height 7.3 mm

PEEK

115

RN Protective cap

048.049V4

Height 8.8 mm

PEEK

RN Repositionable implant analog

048.129

Length 17.6 mm

Stainless steel

RN Scanbody

048.085V4

Length 11.7 mm/Ø 4.8 mm

ABS

RN SFI-Anchor® Abutment, Div. 20°

045.031

Height 1 mm

Titanium grade 5

134

RN SFI-Anchor® Abutment, Div. 20°

045.032

Height 2 mm

Titanium grade 5

134

RN SFI-Anchor® Abutment, Div. 20°

045.033

Height 3 mm

Titanium grade 5

134

RN SFI-Anchor® Abutment, Div. 20°

045.034

Height 4 mm

Titanium grade 5

134

RN SFI-Anchor® Abutment, Div. 20°

045.035

Height 5 mm

Titanium grade 5

134

RN SFI-Anchor® Abutment, Div. 60°

045.026

Height 1 mm

Titanium grade 5/POM

134

RN SFI-Anchor® Abutment, Div. 60°

045.027

Height 2 mm

Titanium grade 5/POM

134

Carbide metal

43 78, 95, 98, 105, 106, 116, 119

125

102

64 93, 115

115 85, 93 85

253

INDEX ALPHABETICAL INDEX

Ø 8 mm

Page

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

RN SFI-Anchor® Abutment, Div. 60°

045.028

Height 3 mm

Titanium grade 5/POM

134

RN SFI-Anchor® Abutment, Div. 60°

045.029

Height 4 mm

Titanium grade 5/POM

134

RN SFI-Anchor® Abutment, Div. 60°

045.030

Height 5 mm

Titanium grade 5/POM

RN SFI-Anchor® Abutment planner

045.056

RN Solid abutment 6°

048.540

Height 4 mm

114

RN Solid abutment 6°

048.541

Height 5.5 mm

114

RN Solid abutment 6°

048.542

Height 7 mm

114

RN Solid All-in-One Set

040.741

Height 5.5 mm

114

RN Solid All-in-One Set

040.742

Height 7 mm

114

RN Solid All-in-One Set

040.840

Height 4 mm

114

RN Solid All-in-One Set

040.841

Height 5.5 mm

114

RN Solid All-in-One Set

040.842

Height 7 mm

114

RN Solid All-in-One Set

040.740

Height 4 mm

RN Straumann® Scanbody

048.068

Length 8.5 mm

PEEK/Ti

RN synOcta® 15° angled abutment

048.610

Height 6.7 mm

Ti/TAN

RN synOcta® 15° angled abutment

048.611

Height 6.7 mm

Ti/TAN

RN synOcta® 15° angled abutment

048.612

Height 5.7 mm

Ti/TAN

RN synOcta® 15° angled abutment

048.613

Height 5.7 mm

Ti/TAN

RN synOcta® 15° angled PLAN abutment

048.916V4

Height 5.7 mm

POM

RN synOcta® 15° angled PLAN abutment

048.917V4

Height 5.7 mm

POM

RN synOcta® 15° angled PLAN abutment

048.922V4

Height 6.7 mm

POM

RN synOcta® 15° angled PLAN abutment

048.923V4

Height 6.7 mm

POM

114

048.601

Height 1.5 mm

TAN

048.929V4

Height 1.5 mm

POM

RN synOcta® 20° angled abutment

048.615

Height 6.7 mm

Ti/TAN

RN synOcta® 20° angled abutment

048.616

Height 6.7 mm

Ti/TAN

RN synOcta® 20° angled abutment

048.617

Height 5.7 mm

Ti/TAN

RN synOcta® 20° angled abutment

048.618

Height 5.7 mm

Ti/TAN

RN synOcta® 20° angled PLAN abutment

048.918V4

Height 5.7 mm

POM

20° angled PLAN abutment

048.919V4

Height 5.7 mm

POM

RN synOcta® 20° angled PLAN abutment

048.924V4

Height 6.7 mm

POM

RN synOcta® 20° angled PLAN abutment

048.925V4

Height 6.7 mm

POM

RN synOcta® Analog

048.108

Length 11.5 mm

Stainless steel

124

RN synOcta® analog

048.124

Length 12 mm

Stainless steel

RN synOcta® Cementable abutment

048.605

Height 5.5 mm

RN synOcta® Cementable PLAN abutment

048.930V4

Height 5.5 mm

POM

RN synOcta® Gold abutment

048.642

Height 4.3 mm/Alloy weight 0.61 g

Ceramicor®/POM

RN synOcta® Gold coping

048.204

Height 5.8 mm/Alloy weight 0.77 g

Ceramicor®

RN synOcta® Gold coping

048.633

Height 4.25/12 mm/Alloy weight 0.36 g

Ceramicor®/POM

RN synOcta® Gold coping

048.632

Height 4.25/12 mm/Alloy weight 0.33 g

Ceramicor®/POM

RN synOcta® Impression cap

048.093V4

Height 5 mm

POM

124

RN synOcta® Impression post

048.010

Height 10 mm

Al/Ti

RN synOcta® Impression post

048.090

Height 21 mm

Al/Ti

RN synOcta® Meso milling cylinder

048.571

Height 10 mm/Ø 8 mm

RN synOcta® Milling cylinder

048.241

Height 8 mm/Ø 6 mm

RN synOcta® Milling cylinder

048.240

Height 8 mm/Ø 6 mm

RN synOcta® Plastic coping

048.227

Height 10 mm

POM

95, 123

RN synOcta® Plastic coping

048.229

Height 10 mm

POM

RN synOcta® Plastic coping

048.663

Height 7 mm

POM

RN synOcta® Plastic coping

048.662

Height 7 mm

POM

RN synOcta® Positioning cylinder

048.070V4

Height 12 mm

POM

RN synOcta® Post

048.715

Height 9 mm

RN synOcta® Post

048.716

Height 9 mm

RN synOcta® Temporary Meso abutment

048.668

Length 10 mm

PEEK/TAN

RN synOcta® Titanium coping

048.214

Height 6 mm

RN synOcta® Transversal PLAN abutment

048.921V4

Height 4 mm

POM

synOcta®

INDEX ALPHABETICAL INDEX

254

1.5 screw-retained abutment

134 135, 199

RN synOcta® 1.5 screw-retained PLAN abutment

synOcta®

POM

Page

95, 97, 120, 122

120

122 80

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

RN synOcta® Transversal (TS) screw-retained abutment

048.620

Height 4 mm

101

RN synOcta® TS gold coping

048.634

Height 5.4 mm/Alloy weight 0.96 g

Ceramicor®

101

Height 5.4 mm/Alloy weight 0.21 g

Ceramicor®/POM

101 101

TS plastic coping

048.665

RN synOcta® TS thread protection screw

048.672

Length 8.2 mm/Ø 3 mm

Stainless steel

RN Temporary Abutment VITA CAD-Temp®

048.664

Height 10 mm/Ø 7 mm

PMMA/TAN

RN Temporary coping

048.655

Height 8.5 mm

PMMA

115

RN Temporary coping

048.654

Height 8.5 mm

PMMA

115

RN Variobase™ Abutment

048.710

Ø 5.05 mm/Height 4 mm

TAN

102

RN Wax-up sleeve

048.088

Length 19.3 mm

PEEK

Round bur

044.003

Ø 2.3 mm

Stainless steel

Round bur

044.004

Ø 3.1 mm

Stainless steel

Round bur

044.022

Ø 1.4 mm

Stainless steel

Screw container

041.047

Length 69 mm/Width 47 mm/Height Plastic 29 mm

Screw-holding device

046.257

Length 45 mm

Stainless steel

Screwdriver

046.154

Length 37 mm

Stainless steel

125

Screwdriver

048.452

Length 50 mm

Stainless steel

125

Screwdriver

040.360

Length 160 mm

Al/Stainless steel

Screwdriver blade

046.256

Length 69 mm

Stainless steel

Screwdriver handle

046.085

Length 109 mm

Stainless steel/PEEK

Screwdriver handle

046.258

Length 100 mm

Al/Stainless steel

SCS Guide screw

048.360V4

Length 6 mm

140

SCS Guide screw

048.361V4

Length 6 mm

140

SCS Guide screw

048.364V4

Length 10 mm

140

SCS Guide screw

048.365V4

Length 12 mm

140

SCS Guide screw

048.366V4

Length 14 mm

140

SCS Guide screw

048.362V4

Length 8 mm

97, 140

SCS Guide screw

048.363V4

Length 8 mm

97, 140

SCS Guiding cylinder

049.360

Length 10.1 mm/Ø 3.6 mm

Stainless steel

SCS Guiding cylinder

049.182

Length 5 mm/Ø 3.6 mm

Ti/Stainless steel

SCS Occlusal screw

048.350

Length 4.4 mm

SCS Occlusal screw

049.181

Length 7.6 mm

TAN

SCS Screwdriver

046.401

Length 21 mm

Cronidur® 30

58, 77

SCS Screwdriver

046.402

Length 27 mm

Cronidur® 30

58, 77

SCS Screwdriver

046.410

Length 20 mm

Cronidur® 30

58, 77

SCS Screwdriver

046.411

Length 26 mm

Cronidur® 30

58, 77

SCS Screwdriver

046.412

Length 32 mm

Cronidur® 30

58, 77

SCS Screwdriver

046.400

Length 15 mm

Cronidur® 30

58, 77

Service instrument

046.108

Length 50 mm

Stainless steel

57, 73, 78

SFI-Anchor® Aligner

045.057

POM

SFI-Anchor® Analog

045.055V4

Titanium grade 5

135, 199

SFI-Anchor® Basic set

045.046V2

Ti/Pekkton®/POM

134, 198

SFI-Anchor® Block-out spacer

045.053V4

Silicone

135, 199

SFI-Anchor® Housing

045.061V4

Titanium grade 5

135, 199

SFI-Anchor® Impression part

045.054V4

POM

SFI-Anchor® Instrument set

045.060

SFI-Anchor® Retention insert, Elitor®

045.051

Elitor®

135, 199

SFI-Anchor® Retention insert, extra-low

045.047V4

Pekkton®

134, 198

SFI-Anchor® Retention insert, low

045.048V4

Pekkton®

134, 198

SFI-Anchor® Retention insert, medium

045.049V4

Pekkton®

134, 198

SFI-Anchor® Retention insert, strong

045.050V4

Pekkton®

135, 199

SFI-Anchor® Screwdriver

045.059

Sandvik

135, 199

SFI-Anchor® Spacer

045.052V4

POM

135, 199

SFI-Anchor® Tool

045.058

Titanium grade 5

135, 199

Shoulder analog

048.117V4

Length 10 mm/Length 17 mm

PPS/Brass

115

Shoulder analog

048.140

Length 10 mm

117

Sleeve

034.052V4

Height 6 mm/Ø 2.8 mm

Stainless steel

Sleeve

034.050V4

Height 5 mm/Ø 5 mm

Stainless steel

Sleeve positioner

034.059

Ø 5 mm

TAN

Sleeve positioner

034.057

Ø 2.8 mm

TAN

Soft Tissue Level PLAN Cassette

048.905

Soft Tissue Level PLAN Set

048.904

Solid abutment driver

046.067

Length 13 mm

Stainless steel

77, 114

Solid abutment driver

046.068

Length 19 mm

Stainless steel

77, 114

61, 62, 65, 95, 96, 99, 104, 120, 122, 123, 140 65, 94, 103

135, 199

135, 199 135, 199

255

INDEX ALPHABETICAL INDEX

synOcta®

Page

ALPHABETICAL INDEX

INDEX ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

SP Profile drill

044.087

Regular Neck/Length 34 mm/ Ø 2.8 mm

Stainless steel

SP Profile drill

044.088

Regular Neck/Length 25 mm/ Ø 3.5 mm

Stainless steel

SP Profile drill

044.086

Regular Neck/Length 25 mm/ Ø 2.8 mm

Stainless steel

SP Profile drill

044.084

Wide Neck/Length 25 mm/ Ø 4.2 mm

Stainless steel

SP Profile drill

044.085

Wide Neck/Length 34 mm/ Ø 4.2 mm

Stainless steel

SP Profile drill

044.089

Regular Neck/Length 34 mm/ Ø 3.5 mm

Stainless steel

SP Profile drill

034.435

Regular Neck/Length 35 mm/ Ø 4.1 mm

Stainless steel

SP Profile drill

034.235

Regular Neck/Length 35 mm/ Ø 3.3 mm

Stainless steel

Spacer

048.451V4

Height 3.5 mm

POM

125

Spare lamella retention insert

048.457

Height 2.6 mm

Elitor®

125

Spring

048.455V4

Stainless steel

125

S/SP Tap

044.577

Length 23 mm/Ø 4.1 mm

Stainless steel/PEEK

S/SP Tap

044.579

Length 23 mm/Ø 4.8 mm

Stainless steel/PEEK

S/SP Tap

044.575

Length 23 mm/Ø 3.3 mm

Stainless steel/PEEK

S/SP Tap

034.445

Length 42 mm/Ø 4.1 mm

Stainless steel

S/SP Tap

034.645

Length 42 mm/Ø 4.8 mm

Stainless steel

S/SP Tap

034.245

Length 42 mm/Ø 3.3 mm

Stainless steel

Stabilization pin for retaining gold copings in solder investment

048.208V4

Length 11 mm

Stainless steel

121

Standard Implant

033.502S

SLActive® 10 mm

Roxolid®

Standard Implant

033.503S

SLActive® 12 mm

Roxolid®

Standard Implant

033.504S

SLActive® 14 mm

Roxolid®

Standard Implant

033.505S

SLActive® 16 mm

Roxolid®

Standard Implant

043.256S

SLA® 10 mm

Roxolid®

Standard Implant

043.257S

SLA® 12 mm

Roxolid®

Standard Implant

043.258S

SLA® 14 mm

Roxolid®

Standard Implant

043.259S

SLA® 16 mm

Roxolid®

Standard Implant

033.432G

SLActive® 10 mm

Roxolid®

Standard Implant

033.433G

SLActive® 12 mm

Roxolid®

Standard Implant

033.501S

SLActive® 8 mm

Roxolid®

Standard Implant

043.255S

SLA® 8 mm

Roxolid®

Standard Implant

033.431G

SLActive® 8 mm

Roxolid®

Standard Implant

033.601S

SLActive® 8 mm

Roxolid®

Standard Implant

033.602S

SLActive® 10 mm

Roxolid®

Standard Implant

033.603S

SLActive® 12 mm

Roxolid®

Standard Implant

043.607S

SLA® 8 mm

Roxolid®

Standard Implant

043.608S

SLA® 10 mm

Roxolid®

Standard Implant

043.609S

SLA® 12 mm

Roxolid®

Standard Implant

033.600S

SLActive® 6 mm

Roxolid®

Standard Implant

043.606S

SLA® 6 mm

Roxolid®

Standard Implant

033.531S

SLActive® 8 mm

Roxolid®

Standard Implant

033.532S

SLActive® 10 mm

Roxolid®

Standard Implant

033.533S

SLActive® 12 mm

Roxolid®

Standard Implant

033.534S

SLActive® 14 mm

Roxolid®

Standard Implant

033.535S

SLActive® 16 mm

Roxolid®

Standard Implant

043.158S

SLA® 12 mm

Roxolid®

Standard Implant

043.156S

SLA® 8 mm

Roxolid®

Standard Implant

043.157S

SLA® 10 mm

Roxolid®

Standard Implant

043.159S

SLA® 14 mm

Roxolid®

Standard Implant

043.160S

SLA® 16 mm

Roxolid®

Standard Implant

033.032G

SLActive® 10 mm

Standard Implant

033.033G

SLActive® 12 mm

Standard Implant

033.530S

SLActive® 6 mm

Roxolid®

Standard Implant

043.155S

SLA® 6 mm

Roxolid®

Standard Implant

033.031G

SLActive® 8 mm

Standard Implant

033.581S

SLActive® 8 mm

Roxolid®

Standard Implant

033.582S

SLActive® 10 mm

Roxolid®

Standard Implant

033.583S

SLActive® 12 mm

Roxolid®

Standard Implant

033.584S

SLActive® 14 mm

Roxolid®

Standard Implant

043.062S

SLA® 8 mm

Roxolid®

Standard Implant

043.063S

SLA® 10 mm

Roxolid®

256

Page

ALPHABETICAL INDEX

Ar t. No.

Dimensions

Material

Standard Implant

043.064S

SLA® 12 mm

Roxolid®

Page 23

Standard Implant

043.065S

SLA® 14 mm

Roxolid®

Standard Implant

033.580S

SLActive® 6 mm

Roxolid®

Standard Implant

043.061S

SLA® 6 mm

Roxolid®

Standard Plus Implant

033.417S

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.419S

SLActive® 14 mm

Roxolid®

Standard Plus Implant

043.417S

SLA® 10 mm

Roxolid®

Standard Plus Implant

043.418S

SLA® 12 mm

Roxolid®

Standard Plus Implant

043.419S

SLA® 14 mm

Roxolid®

Standard Plus Implant

033.416S

SLActive® 8 mm

Roxolid®

Standard Plus Implant

043.416S

SLA® 8 mm

Roxolid®

Standard Plus Implant

033.512S

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.513S

SLActive® 12 mm

Roxolid®

Standard Plus Implant

033.514S

SLActive® 14 mm

Roxolid®

Standard Plus Implant

043.261S

SLA® 10 mm

Roxolid®

Standard Plus Implant

043.262S

SLA® 12 mm

Roxolid®

Standard Plus Implant

043.263S

SLA® 14 mm

Roxolid®

Standard Plus Implant

043.152S

SLA® 10 mm

Standard Plus Implant

043.153S

SLA® 12 mm

Standard Plus Implant

043.154S

SLA® 14 mm

Standard Plus Implant

033.452G

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.453G

SLActive® 12 mm

Roxolid®

Standard Plus Implant

033.511S

SLActive® 8 mm

Roxolid®

Standard Plus Implant

043.260S

SLA® 8 mm

Roxolid®

Standard Plus Implant

043.151S

SLA® 8 mm

Standard Plus Implant

033.451G

SLActive® 8 mm

Roxolid®

Standard Plus Implant

033.591S

SLActive® 8 mm

Roxolid®

Standard Plus Implant

033.592S

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.593S

SLActive® 12 mm

Roxolid®

Standard Plus Implant

033.594S

SLActive® 14 mm

Roxolid®

Standard Plus Implant

043.067S

SLA® 8 mm

Roxolid®

Standard Plus Implant

043.068S

SLA® 10 mm

Roxolid®

Standard Plus Implant

043.069S

SLA® 12 mm

Roxolid®

Standard Plus Implant

043.070S

SLA® 14 mm

Roxolid®

Standard Plus Implant

043.252S

SLA® 10 mm

Standard Plus Implant

043.253S

SLA® 12 mm

Standard Plus Implant

043.254S

SLA® 14 mm

Standard Plus Implant

033.252G

SLActive® 10 mm

Standard Plus Implant

033.253G

SLActive® 12 mm

Standard Plus Implant

033.590S

SLActive® 6 mm

Roxolid®

Standard Plus Implant

033.044S

SLActive® 4 mm

Roxolid®

Standard Plus Implant

043.066S

SLA® 6 mm

Roxolid®

Standard Plus Implant

043.251S

SLA® 8 mm

Standard Plus Implant

033.251G

SLActive® 8 mm

Standard Plus Implant

033.611S

SLActive® 8 mm

Roxolid®

Standard Plus Implant

033.612S

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.613S

SLActive® 12 mm

Roxolid®

Standard Plus Implant

043.656S

SLA® 8 mm

Roxolid®

Standard Plus Implant

043.657S

SLA® 10 mm

Roxolid®

Standard Plus Implant

043.658S

SLA® 12 mm

Roxolid®

Standard Plus Implant

043.652S

SLA® 10 mm

Standard Plus Implant

043.653S

SLA® 12 mm

Standard Plus Implant

033.610S

SLActive® 6 mm

Roxolid®

Standard Plus Implant

033.045S

SLActive® 4 mm

Roxolid®

Standard Plus Implant

043.655S

SLA® 6 mm

Roxolid®

Standard Plus Implant

043.651S

SLA® 8 mm

Standard Plus Implant

033.561S

SLActive® 8 mm

Roxolid®

Standard Plus Implant

033.562S

SLActive® 10 mm

Roxolid®

Standard Plus Implant

033.563S

SLActive® 12 mm

Roxolid®

Standard Plus Implant

033.564S

SLActive® 14 mm

Roxolid®

Standard Plus Implant

043.162S

SLA® 8 mm

Roxolid®

Standard Plus Implant

043.163S

SLA® 10 mm

Roxolid®

Standard Plus Implant

043.164S

SLA® 12 mm

Roxolid®

Standard Plus Implant

043.165S

SLA® 14 mm

Roxolid®

Standard Plus Implant

043.052S

SLA® 10 mm

Standard Plus Implant

043.053S

SLA® 12 mm

Standard Plus Implant

043.054S

SLA® 14 mm

257

INDEX ALPHABETICAL INDEX

Ar ticle

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

Standard Plus Implant

033.052G

SLActive® 10 mm

Page 27

Standard Plus Implant

033.053G

SLActive® 12 mm

Standard Plus Implant

033.560S

SLActive® 6 mm

Roxolid®

Standard Plus Implant

033.043S

SLActive® 4 mm

Roxolid®

Standard Plus Implant

043.161S

SLA® 6 mm

Roxolid®

Standard Plus Implant

043.051S

SLA® 8 mm

Standard Plus Implant

033.051G

SLActive® 8 mm

Standard Plus Implant

033.418S

SLActive® 12 mm

Roxolid®

Stepped drill

034.060

Ø 3.8/4.6 mm

Stainless steel

Stepped drill

034.061

Ø 6.3/7.3 mm

Stainless steel

Stepped pin

049.818V4

Length 16 mm/Ø 2.2/3.5 mm

Sterile NC Closure cap

024.2105S

Height 0.5 mm

Sterile NC Closure cap

024.2100S

Height 0 mm

Sterile NC Healing abutment

024.2234S

Height 3.5 mm/Ø 3.3 mm

Sterile NC Healing abutment

024.2236S

Height 5 mm/Ø 3.3 mm

Sterile NC Healing abutment

024.2244S

Height 3.5 mm/Ø 4.8 mm

Sterile NC Healing abutment

024.2246S

Height 5 mm/Ø 4.8 mm

Sterile NC Healing abutment

024.2270S

Ø 5 mm

PEEK

Sterile NC Healing abutment

024.2222S

Height 2 mm/Ø 3.6 mm

Sterile NC Healing abutment

024.2224S

Height 3.5 mm/Ø 3.6 mm

Sterile NC Healing abutment

024.2226S

Height 5 mm/Ø 3.6 mm

Sterile NC Healing abutment

024.2242S

Height 2 mm/Ø 4.8 mm

Sterile NNC Closure cap

048.324S

Height 0 mm

Sterile NNC Closure screw

048.325S

Height 1.5 mm

Sterile NNC Healing cap

048.071S

Height 3 mm

Sterile NNC Healing cap

048.074S

Height 4.5 mm

Sterile NNC Healing cap

048.082S

Height 2 mm

Sterile RC Closure cap

024.4105S

Height 0.5 mm

38, 40

Sterile RC Closure cap

024.4100S

Height 0 mm

38, 40

Sterile RC Healing abutment

024.4236S

Height 6 mm/Ø 4.7 mm

39, 41

Sterile RC Healing abutment

024.4242S

Height 2 mm/Ø 6.5 mm

39, 41

Sterile RC Healing abutment

024.4244S

Height 4 mm/Ø 6.5 mm

39, 41

Sterile RC Healing abutment

024.4246S

Height 6 mm/Ø 6.5 mm

39, 41

Sterile RC Healing abutment

024.4270S

Ø 7 mm

PEEK

39, 41

Sterile RC Healing abutment

024.4222S

Height 2 mm/Ø 5 mm

38, 40

Sterile RC Healing abutment

024.4224S

Height 4 mm/Ø 5 mm

38, 40

Sterile RC Healing abutment

024.4226S

Height 6 mm/Ø 5 mm

38, 40

Sterile RC Healing abutment

024.4234S

Height 4 mm/Ø 4.4 mm

38, 40

Sterile RN Closure cap

048.373S

Height 1.5 mm

20, 21, 23, 26, 27, 29, 32, 33

Sterile RN Closure cap

048.371S

20, 21, 23, 26, 27, 29, 32, 33

Sterile RN Healing cap

048.028S

Height 2 mm

20, 21, 23, 26, 28, 30, 32, 34

Sterile RN Healing cap

048.029S

Height 3.5 mm

20, 21, 23, 26, 28, 30, 32, 34

Sterile RN Healing cap

048.033S

Height 2 mm

20, 22, 23, 26, 27, 29, 32, 33

Sterile RN Healing cap

048.034S

Height 3 mm

20, 22, 23, 26, 27, 29, 32, 33

Sterile RN Healing cap

048.037S

Height 4.5 mm

20, 22, 23, 26, 28, 30, 32, 34

Sterile WN Closure cap

048.375S

Sterile WN Healing cap

048.030S

Sterile WN Healing cap Sterile WN Healing cap

24, 31, 35

Height 2 mm

24, 31, 35

048.038S

Height 2 mm

24, 31, 35

048.039S

Height 3 mm

24, 31, 35

Sterile WN Healing cap

048.053S

Height 4.5 mm

24, 31, 35

Stop key

034.006

Storage system

041.501

Storage system

INDEX ALPHABETICAL INDEX

Stainless steel

Length 226 mm/Width 280 mm/ Height 248 mm

041.500

Length 226 mm/Width 280 mm/ Height 248 mm

Straumann® Bone Block Fixation

041.032

Length 130 mm/Width 118 mm/ Height 25 mm

Thermoplastic

Straumann® Bone Level Implant

120.0033

Metal/Plastic

216

Straumann® BoneCeramic™ 400–700

070.203

Granule size: 400–700 µm/Unit size: 0.25 g/Volume: approx. 0.3 ml

Straumann® BoneCeramic™ 500–1000

070.204

Granule size: 500–1000 µm/Unit size: 0.5 g/Volume: approx. 0.95 ml

Straumann® BoneCeramic™ 500–1000

070.205

Granule size: 500–1000 µm/Unit size: 1 g/Volume: approx. 1.9 ml

Straumann® CARES® Wax-up kit

019.0063

87, 151

Straumann® CARES® Wax-up kit for Camlog®

019.0050

87, 151

258

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Straumann® CARES® Wax-up kit for NobelReplace™

019.0051

Dimensions

Material

Page

Straumann® Emdogain® 0.15 ml

075.098

Straumann® Emdogain® 0.3 ml

075.101

Straumann® Emdogain® 0.3 ml Multipack

075.114

Straumann® Emdogain® 0.7 ml

075.102

Straumann® Emdogain® 0.7 ml Multipack

075.116

Straumann® Emdogain® PLUS

075.117

Straumann® PrefGel® 0.6 ml

075.203

Straumann® PURE Ceramic Implant

031.024S

ZLA™ 14 mm/Abutment height 4 mm ZrO2

Straumann® PURE Ceramic Implant

031.022S

ZLA™ 10 mm/Abutment height 4 mm ZrO2

Straumann® PURE Ceramic Implant

031.023S

ZLA™ 12 mm/Abutment height 4 mm ZrO2

Straumann®

PURE Ceramic Implant

031.031S

ZLA™ 8 mm/Abutment height 5.5 mm ZrO2

Straumann® PURE Ceramic Implant

031.032S

ZLA™ 10 mm/Abutment height 5.5 mm

ZrO2

Straumann® PURE Ceramic Implant

031.033S

ZLA™ 12 mm/Abutment height 5.5 mm

ZrO2

Straumann® PURE Ceramic Implant

031.034S

ZLA™ 14 mm/Abutment height 5.5 mm

ZrO2

Straumann® PURE Ceramic Implant

031.021S

ZLA™ 8 mm/Abutment height 4 mm

ZrO2

Straumann® PURE Ceramic Implant

031.002S

ZLA™ 10 mm/Abutment height 4 mm ZrO2

Straumann® PURE Ceramic Implant

031.003S

ZLA™ 12 mm/Abutment height 4 mm ZrO2

Straumann®

PURE Ceramic Implant

031.004S

ZLA™ 14 mm/Abutment height 4 mm ZrO2

Straumann® PURE Ceramic Implant

031.011S

ZLA™ 8 mm/Abutment height 5.5 mm ZrO2

Straumann® PURE Ceramic Implant

031.012S

ZLA™ 10 mm/Abutment height 5.5 mm

ZrO2

Straumann® PURE Ceramic Implant

031.013S

ZLA™ 12 mm/Abutment height 5.5 mm

ZrO2

Straumann®

PURE Ceramic Implant

031.014S

ZLA™ 14 mm/Abutment height 5.5 mm

ZrO2

Straumann® PURE Ceramic Implant

031.001S

ZLA™ 8 mm/Abutment height 4 mm

ZrO2

Straumann® Standard Plus NNC Implant

140.122

Straumann® Surgical cassette

040.165

Length 290 mm/Width 175 mm/ Height 62 mm

Plastic

Straumann® Tapered Effect Implant

140.062

Straumann® TiBrush™

070.005

Standard dental coupling Ø 2.35 mm/Length 39.2 mm

Stainless steel/Ti

Surgical cassette

034.001

Length 290 mm/Width 175 mm/ Height 62 mm

Surgical instruments starter set, Ø 4.1 mm, Tap for adapter, for preparation using the handpiece,

040.330

Surgical instruments starter set, Ø 4.8 mm, Tap for adapter, for preparation using the handpiece

040.331

synOcta® Basal screw

048.356

Length 6.7 mm

TAN

synOcta® Guide pin

046.241

Length 50 mm

Stainless steel

synOcta® Guide pin

046.247

Length 50 mm

Al/Ti

synOcta® system

140.024

T-sleeve

034.053V4

T-sleeve

87, 151

Metal/Plastic

Stainless steel

216 59 216 17 74

85, 86, 94, 96, 102, 109 78, 95, 105 216

Height 5 mm/Ø 5 mm

Stainless steel

034.055V4

Height 6 mm/Ø 2.8 mm

Stainless steel

Tap

044.570

M2 x 0.25 mm

Stainless steel

101

Tapered Effect Implant

033.522S

SLActive® 10 mm

Roxolid®

Tapered Effect Implant

033.523S

SLActive® 12 mm

Roxolid®

Tapered Effect Implant

033.524S

SLActive® 14 mm

Roxolid®

Tapered Effect Implant

043.265S

SLA® 10 mm

Roxolid®

Tapered Effect Implant

043.266S

SLA® 12 mm

Roxolid®

Tapered Effect Implant

043.267S

SLA® 14 mm

Roxolid®

Tapered Effect Implant

033.521S

SLActive® 8 mm

Roxolid®

Tapered Effect Implant

043.264S

SLA® 8 mm

Roxolid®

Tapered Effect Implant

033.623S

SLActive® 12 mm

Roxolid®

Tapered Effect Implant

033.624S

SLActive® 14 mm

Roxolid®

Tapered Effect Implant

043.661S

SLA® 12 mm

Roxolid®

Tapered Effect Implant

043.662S

SLA® 14 mm

Roxolid®

259

INDEX ALPHABETICAL INDEX

78, 106

Metal/Plastic

ALPHABETICAL INDEX

INDEX ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

Tapered Effect Implant

033.622S

SLActive® 10 mm

Roxolid®

Tapered Effect Implant

043.660S

SLA® 10 mm

Roxolid®

Tapered Effect Implant

033.572S

SLActive® 10 mm

Roxolid®

Tapered Effect Implant

033.573S

SLActive® 12 mm

Roxolid®

Tapered Effect Implant

033.574S

SLActive® 14 mm

Roxolid®

Tapered Effect Implant

043.167S

SLA® 10 mm

Roxolid®

Tapered Effect Implant

043.168S

SLA® 12 mm

Roxolid®

Tapered Effect Implant

043.169S

SLA® 14 mm

Roxolid®

Tapered Effect Implant

033.762G

SLActive® 10 mm

Tapered Effect Implant

033.763G

SLActive® 12 mm

Tapered Effect Implant

033.571S

SLActive® 8 mm

Roxolid®

Tapered Effect Implant

043.166S

SLA® 8 mm

Roxolid®

Tapered Effect Implant

033.761G

SLActive® 8 mm

TE Profile drill

044.701

Regular Neck/Length 28 mm/ Ø 2.8 mm

Stainless steel

TE Profile drill

044.703

Wide Neck/Length 28 mm/ Ø 4.2 mm

Stainless steel

TE Profile drill

044.705

Regular Neck/Length 28 mm/ Ø 3.5 mm

Stainless steel

TE Profile drill

044.708

Regular Neck/Length 37 mm/ Ø 2.8 mm

Stainless steel

TE Profile drill

044.710

Wide Neck/Length 37 mm/ Ø 4.2 mm

Stainless steel

TE Profile drill

044.712

Regular Neck/Length 37 mm/ Ø 3.5 mm

Stainless steel

TE Profile drill

034.237

Regular Neck/Length 37 mm/ Ø 3.3 mm

Stainless steel

TE Profile drill

034.437

Regular Neck/Length 37 mm/ Ø 4.1 mm

Stainless steel

TempImplant

80372SV4

Ø 2 mm/Length 12 mm

Ti-6Al-7Nb

TempImplant

80371SV4

Ø 2 mm/Length 10 mm

Ti-6Al-7Nb

TempImplant bending tool

80356

Length 82 mm/Height 21 mm

Stainless steel

TempImplant inserting device

80363

Length 21.5 mm

Stainless steel

TempImplant inserting device

80398

Length 19 mm

Stainless steel

Template fixation pin

034.255

Ø 5/2.8 mm

Stainless steel

Template fixation pin

034.256

Ø 2.8/2.8 mm

Stainless steel

Template fixation pin

034.455

Ø 5/3.5 mm

Stainless steel

Template fixation pin

034.655

Ø 5/4.2 mm

Stainless steel

Threaded mounting ring

048.454V4

Height 2.2 mm

POM

Titanium bar

048.465

Length 50 mm/Height 3 mm

Titanium bar

048.466

Length 50 mm/Height 2.3 mm

Titanium bar matrix

048.470

Length 50 mm/Height 4.5 mm

Ti/Brass

122, 123, 192, 203

Titanium bar matrix

048.471

Length 50 mm/Height 3.5 mm

Ti/Brass

122, 123, 192, 203

Titanium matrix

048.450

Height 3.1 mm

Ti alloy

Torque control device

046.049

Length 82 mm

Stainless steel

TPS occlusal screw

048.312C

Length 8 mm

Transfer aid

048.059V4

Height 6.5 mm

Transfer aid

048.002V4

Height 5.5 mm

Transfer aid

048.000V4

Height 5.5 mm

Transfer aid

048.003V4

Height 5 mm

101

Transfer aid

048.054V4

Height 6.5 mm

106

Transfer aid

048.032

Height 5 mm

Transfer pin

048.109

Length 18 mm

Stainless steel

Transversal screw

049.154

Length 3 mm/Ø 2 mm

TAV

Tray

041.211

Length 218 mm/Width 109 mm/ Height 16 mm

Anodized Al

TS gold coping for Octa

048.232C

Ceramicor®

213

TS Hexagonal screwdriver

046.420

Length 24 mm

Stainless steel

101

TS post for Octa

048.448C

Tweezers

046.057

Length 105 mm

Stainless steel

57, 73

Tweezers

046.095

Length 105 mm

Stainless steel/Ti

57, 73

Twist drill PRO

044.251

Length 41 mm/Ø 3.5 mm

Stainless steel

Twist drill PRO

044.254

Length 33 mm/Ø 4.2 mm

Stainless steel

Twist drill PRO

044.255

Length 41 mm/Ø 4.2 mm

Stainless steel

Twist drill PRO

044.250

Length 33 mm/Ø 3.5 mm

Stainless steel

Twist drill PRO

034.626

Length 36 mm/Ø 4.2 mm

Stainless steel

Twist drill PRO

034.629

Length 40 mm/Ø 4.2 mm

Stainless steel

Twist drill PRO

034.623

Length 32 mm/Ø 4.2 mm

Stainless steel

Twist drill PRO

034.226

Length 36 mm/Ø 2.8 mm

Stainless steel

260

Page

72 125 122, 192, 203 122, 192, 203

125 57, 73, 78 213

107 46, 125 101 76

213

ALPHABETICAL INDEX

Ar ticle

Ar t. No.

Dimensions

Material

Twist drill PRO

034.229

Length 40 mm/Ø 2.8 mm

Stainless steel

Twist drill PRO

034.423

Length 32 mm/Ø 3.5 mm

Stainless steel

Twist drill PRO

034.426

Length 36 mm/Ø 3.5 mm

Stainless steel

Twist drill PRO

034.429

Length 40 mm/Ø 3.5 mm

Stainless steel

Twist drill PRO

034.223

Length 32 mm/Ø 2.8 mm

Stainless steel

Ultrasonic cleaning cassette

040.175

Length 150 mm/Width 65 mm/ Height 25 mm

Plastic/Silicone

Upper jaw

140.033

WN Bone profiler

044.305

Inner Ø 3.6/6.5 mm/Outer Ø 7.2 mm/Length 25 mm

Stainless steel

WN Burn-out coping

048.269

Ø 7 mm/Height 11.1 mm

POM

109

WN Impression cap

048.013

Height 8 mm

POM

103, 117

WN LOCATOR® Abutment

048.184

Height 2 mm

TAV

136

WN LOCATOR® Abutment

048.185

Height 3 mm

TAV

136

WN LOCATOR® Abutment

048.186

Height 4 mm

TAV

136

WN LOCATOR® Abutment

048.187

Height 5 mm

TAV

136

WN LOCATOR® Abutment

048.183

Height 1 mm

TAV

136

WN PLAN LOCATOR® Abutment

048.283V4

Height 1 mm

POM

WN PLAN LOCATOR® Abutment

048.284V4

Height 2 mm

POM

WN PLAN LOCATOR® Abutment

048.285V4

Height 3 mm

POM

WN PLAN LOCATOR® Abutment

048.286V4

Height 4 mm

POM

WN PLAN LOCATOR® Abutment

048.287V4

Height 5 mm

POM

WN PLAN Solid abutment 6°

048.938V4

Height 4 mm

POM

WN PLAN Solid abutment 6°

048.939V4

Height 5.5 mm

POM

WN Protective cap

048.051

Height 6 mm

PEEK

118

WN Protective cap

048.052

Height 7.5 mm

PEEK

WN Repositionable implant analog

048.172

Length 17.8 mm

Stainless steel

WN Scanbody

048.086V4

Length 11.8 mm/Ø 6.5 mm

ABS

WN Solid abutment 6°

048.545

Height 4 mm

117

WN Solid abutment 6°

048.546

Height 5.5 mm

117

WN Solid All-in-One Set

040.745

Height 4 mm

117

WN Solid All-in-One Set

040.746

Height 5.5 mm

117

WN Solid All-in-One Set

040.846

Height 5.5 mm

117

WN Solid All-in-One Set

040.845

Height 4 mm

WN Straumann® Scanbody

048.069

Length 8.9 mm

PEEK/Ti

WN synOcta® 15° angled abutment

048.608

Height 5.5 mm

Ti/TAN

107

WN synOcta® 15° angled abutment

048.609

Height 5.5 mm

Ti/TAN

107

WN synOcta® 15° angled PLAN abutment

048.933V4

Height 5.5 mm

POM

WN synOcta® 15° angled PLAN abutment

048.934V4

Height 5.5 mm

POM

WN synOcta® 1.5 screw-retained abutment

048.603

Height 1.5 mm

TAN

WN synOcta® 1.5 screw-retained PLAN abutment

048.931V4

Height 1.5 mm

POM

WN synOcta® analog

048.171

Length 12 mm

Stainless steel

103

WN synOcta® cementable abutment

048.606

Height 5.5 mm

106

WN synOcta® Cementable PLAN abutment

048.932V4

Height 5.5 mm

POM

WN synOcta® Gold abutment

048.644

Height 4.2 mm/Alloy weight 0.78 g

Ceramicor®/POM

104

WN synOcta® Gold coping

048.639

Height 4.75/12 mm/Alloy weight 0.87 g

Ceramicor®/POM

104

WN synOcta® Gold coping

048.638

Height 4.75/12 mm/Alloy weight 0.86 g

Ceramicor®/POM

104

WN synOcta® impression cap

048.091

Height 10 mm

103

WN synOcta® Meso milling cylinder

048.573

Height 10 mm/Ø 10 mm

104

WN synOcta® Plastic coping

048.666

Height 10 mm

POM

104

WN synOcta® Plastic coping

048.667

Height 10 mm

POM

104

WN synOcta® Plastic coping

048.244

Height 7.35 mm

POM

106

WN synOcta® Plastic coping

048.243

Height 7.35 mm

POM

106

WN synOcta® positioning cylinder

048.095

Height 12 mm

POM

103

WN synOcta® Post

048.718

Height 9 mm

103

WN synOcta® Post

048.717

Height 9 mm

103

WN Temporary Abutment VITA CAD-Temp®

048.242

Height 10 mm/Ø 10 mm

PMMA/TAN

118

WN Temporary coping

048.657

Height 7.3 mm

PMMA

118

WN Temporary coping

048.656

Height 7.3 mm

PMMA

118

WN Variobase™ Abutment

048.711

Ø 7 mm/Height 4.5 mm

TAN

109

WN Wax-up sleeve

048.089

Length 16.4 mm

PEEK

X-ray reference sphere

049.076V4

Ø 5 mm

Stainless steel

X-ray templates

150.215

Plastic

X-ray templates

150.230

Plastic

X-ray templates

150.216

Plastic

Plastic, acrylic-glass/Ti

Page

217 52

118 86, 103 86

117

80 80 104 80

261

INDEX ALPHABETICAL INDEX

Valid from January 1, 2014, until publication of the new catalog. Trademarks Ackermann Bar ® is a registered trademark licensed to Cendres + Métaux Holding SA, Switzerland. Camlog ® is a brand used by Camlog Technologies AG, Germany. Ceramicor ®, Elitor ®, Esteticor ® and Pekkton® are registered trademarks of Cendres & Métaux SA, Biel-Bienne (Switzerland). Cronidur ® 30 is a registered trademark of Energietechnik Essen GmbH, Germany. The Dalbo ® -Rotex ® Matrix is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland). Dolder ® is a registered trademark from Prof. Eugen Dolder, exclusively licensed to Cendres + Métaux Holding SA, Switzerland. IPS e.max ® is a registered trademark of Ivoclar Vivadent AG, Liechtenstein. LOCATOR ® is a registered trademark of Zest IP Holdings LLC, USA. MP-Clip ® is a registered trademark licenced to Cendres + Métaux Holding SA, Switzerland. NobelReplace ® is a registered trademark of Nobel Biocare, Switzerland. SFI-Anchor ® is a registered trademark of Cendres+Métaux SA, Biel-Bienne (Switzerland). SFI-Anchor ® is designed and manufactured by Cendres + Métaux and is exclusively distributed by lnstitut Straumann AG, Basel. Sirona ® is a registered trademark of Sirona Dental Systems GmbH, Germany.

© Institut Straumann AG, 2014. All rights reserved. Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved.

Straumann products are CE marked 12/13 452.200/A/000 BI21213

International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone +41 (0)61 965 11 11 Fax +41 (0)61 965 11 01 www.straumann.com